Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/07/2023, à 15:57

GPA92

[NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,

J'ai un PC portable ASUS en dual boot Windows 11 + Ubuntu 22.04

Initialement, je ne pouvais pas activer le bouton Bluetooth dans le menu Paramètre/Bluetooth (bien que le mode avion soit désactivé).

J'ai résolu partiellement le fonctionnement en réactivant le service Bluetooth avec

sudo systemctl enable bluetooth.service

.
Nota: au préalable, j'avais testé sans succès

sudo gedit /etc/bluetooth/main.conf

en remplaçant

AutoEnable=false

par

AutoEnable=true

A partir de là, dans le menu Paramètres/Bluetooth d'Ubuntu, j'ai réussi à activer le Bluetooth et à appairer le clavier et la souris.

Il reste deux problèmes:
* Lors du GRUB, il faut que j'utilise le clavier intégré du PC pour choisir entre Ubuntu ou Windows11 (c'est impossible avec le clavier Bluetooth qui s'est déconnecté suite au passage en veille)
* En sortie de veille ou lors d'un redémarrage, lors la fenêtre de connexion Ubuntu, il est impossible d'utiliser le clavier et la souris Bluetooth (il faut utiliser une souris filaire et le clavier intégré de mon PC)
* Une fois la session Ubuntu ouverte, l'icône Bluetooth est reste affichée en haut à droite mais mes 2 appareils apparaissent en déconnecté (au lieu de connecté).

Comment corriger ces 2 problèmes résiduels ?

Remarque: le bluetooth (clavier + souris) fonctionne correctement avec Windows 11 (y compris en sortie de veille).

Cordialement,

Dernière modification par GPA92 (Le 20/08/2023, à 20:47)

Hors ligne

#2 Le 24/07/2023, à 16:02

xubu1957

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,

Il faudrait fournir, en te servant du Retour utilisable de commande :

uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth
dpkg -l | grep blue
rfkill list all
sudo service bluetooth status | cat

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 24/07/2023, à 17:43

ylag

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,

Peut-être vérifier dans le BIOS s'il n'y aurait pas une section concernant l'activation du Bluetooth ?

Aussi, si pas déjà fait, désactiver le démarrage rapide de Windows ?

A+

Dernière modification par ylag (Le 24/07/2023, à 17:44)

Hors ligne

#4 Le 24/07/2023, à 18:23

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à l'attention de ylag:

* il n'y a pas de paramètres concernant le Bluetooth dans mon BIOS (y compris dans le menu "advanced")
* j'avais désactivé le démarrage rapide dans Windows 10 (en vue du dual boot avec Ubuntu). J'ai vérifié à l'instant suite à l'upgrade vers Windows 11, ce réglage est resté inchangé.

Hors ligne

#5 Le 24/07/2023, à 18:25

xubu1957

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#6 Le 24/07/2023, à 18:31

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à l'attention de xubu1957 ( #2 ):

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ uname -a; lspci -nnk | grep -iA3 net; lsusb; sudo dmesg | grep -i bluetooth; sudo dmesg | grep -i firmware; lsmod | grep bluetooth
Linux gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB 5.15.0-76-generic #83-Ubuntu SMP Thu Jun 15 19:16:32 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
	DeviceName: WLAN
	Subsystem: AzureWave RTL8821CE 802.11ac PCIe Wireless Network Adapter [1a3b:3041]
	Kernel driver in use: rtw_8821ce
	Kernel modules: rtw88_8821ce
04:00.0 Non-Volatile memory controller [0108]: Intel Corporation SSD 660P Series [8086:f1a8] (rev 03)
Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:56dd IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 007: ID 0951:1601 Kingston Technology DataTraveler II+ Pen Drive
Bus 001 Device 005: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 006: ID 13d3:3530 IMC Networks Bluetooth Radio 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[sudo] Mot de passe de gilles : 
[    2.801213] usb 1-10: Product: Bluetooth Radio 
[    4.224944] Bluetooth: Core ver 2.22
[    4.224969] NET: Registered PF_BLUETOOTH protocol family
[    4.224970] Bluetooth: HCI device and connection manager initialized
[    4.224973] Bluetooth: HCI socket layer initialized
[    4.224976] Bluetooth: L2CAP socket layer initialized
[    4.224979] Bluetooth: SCO socket layer initialized
[    5.019589] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.019591] Bluetooth: BNEP filters: protocol multicast
[    5.019594] Bluetooth: BNEP socket layer initialized
[   48.565782] Bluetooth: RFCOMM TTY layer initialized
[   48.565794] Bluetooth: RFCOMM socket layer initialized
[   48.565799] Bluetooth: RFCOMM ver 1.11
[  131.669839] hid-generic 0005:248A:8266.0003: input,hidraw2: BLUETOOTH HID v0.01 Mouse [BT5.0 Mouse] on d8:c0:a6:90:35:f4
[  163.714911] hid-generic 0005:046D:B35B.0004: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [MX Keys] on d8:c0:a6:90:35:f4
[    0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -17610720 force to 0
[    0.011248] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[    4.174861] rtw_8821ce 0000:03:00.0: Firmware version 24.8.0, H2C version 12
[    4.210853] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
bluetooth             704512  47 btrtl,btintel,btbcm,bnep,btusb,rfcomm
ecdh_generic           16384  2 bluetooth
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ dpkg -l | grep blue
ii  bluedevil                                     4:5.24.7-0ubuntu0.1                        amd64        KDE Bluetooth stack
ii  bluez                                         5.64-0ubuntu1                              amd64        Bluetooth tools and daemons
ii  bluez-cups                                    5.64-0ubuntu1                              amd64        Bluetooth printer driver for CUPS
ii  bluez-obexd                                   5.64-0ubuntu1                              amd64        bluez obex daemon
ii  gir1.2-gnomebluetooth-3.0:amd64               42.0-5                                     amd64        Introspection data for GnomeBluetooth
ii  gnome-bluetooth                               3.34.5-8                                   amd64        GNOME Bluetooth Send To app
ii  gnome-bluetooth-3-common                      42.0-5                                     all          GNOME Bluetooth 3 common files
ii  gnome-bluetooth-common                        3.34.5-8                                   all          GNOME Bluetooth common files
ii  libbluetooth3:amd64                           5.64-0ubuntu1                              amd64        Library to use the BlueZ Linux Bluetooth stack
ii  libgnome-bluetooth-3.0-13:amd64               42.0-5                                     amd64        GNOME Bluetooth 3 support library
ii  libgnome-bluetooth13:amd64                    3.34.5-8                                   amd64        GNOME Bluetooth tools - support library
ii  libkf5bluezqt-data                            5.92.0-0ubuntu1                            all          data files for bluez-qt
ii  libkf5bluezqt6:amd64                          5.92.0-0ubuntu1                            amd64        Qt wrapper for bluez
ii  pulseaudio-module-bluetooth                   1:15.99.1+dfsg1-1ubuntu2.1                 amd64        Bluetooth module for PulseAudio sound server
ii  qml-module-org-kde-bluezqt:amd64              5.92.0-0ubuntu1                            amd64        QML wrapper for bluez
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ rfkill list all
0: asus-wlan: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: asus-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
2: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
3: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ sudo service bluetooth status | cat
● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2023-07-24 18:15:11 CEST; 12min ago
       Docs: man:bluetoothd(8)
   Main PID: 974 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 9258)
     Memory: 2.5M
        CPU: 3.393s
     CGroup: /system.slice/bluetooth.service
             └─974 /usr/lib/bluetooth/bluetoothd

juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink/sbc
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource/sbc
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink/sbc_xq_453
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource/sbc_xq_453
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink/sbc_xq_512
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource/sbc_xq_512
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink/sbc_xq_552
juil. 24 18:15:55 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource/sbc_xq_552
juil. 24 18:17:14 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: src/device.c:load_gatt_db() No cache for D1:05:90:A8:9E:80
juil. 24 18:17:42 gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB bluetoothd[974]: src/device.c:load_gatt_db() No cache for EB:24:02:F2:5C:F4
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$

Hors ligne

#7 Le 24/07/2023, à 19:28

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à l'attention de xubu1957 ( #5 ):
* j'ai déjà beaucoup consulté de sujet sur le Bluetooth avant de demander de l'aide sur le forum
* dans le wiki ubuntu pour le bluetooth ( https://doc.ubuntu-fr.org/bluetooth ), j'ai trouvé la solution pour activer le service Bluetooth ( voir #1 ) mais cela a fait apparaître 2 restrictions gênantes ( voir #1 )
* j'ai vu dans un des liens du #5 qu'il fallait éviter d'arrêter Windows et qu'il fallait utiliser Redémarrer pour éviter des problèmes de Bluetooth => dorénavant j'arrêterai uniquement avec Ubuntu ( je vais faire un test et te tiendrai informé )
* dans ce tuto ( #5 ),je n'ai pas vu de problématique concernant mon problème en sortie de veille (évoqué au #1)

Info complémentaire:
* Mon PC est équipé du composant wireless Realtek RTL8821CE qui gère le wifi mais également le Bluetooth (info sur le site Realtek)
* Lors de mon passage Ubuntu 20.04 à 22.04, j'ai mis à jour le pilote de ce composant à partir de https://pkgs.org ( pilote rtl8821ce-dkms_5.5.2.1-0ubuntu10_all.deb )
Sur ce site, il est mentionné que ce pilote est pour du WIFI ( "DKMS source for the Realtek 8821C PCIe Wi-Fi driver" ) => je ne sais pas si ce pilote gère également le Bluetooth.
Dans le passé, j'avais eu des difficulté à faire fonctionner le WIFI (dans la foulée de l'installation Ubuntu 20.04 en téléchargeant les pilotes wifi lors de l'installation) => résolu avec ce pilote sur le site PKGS

Hors ligne

#8 Le 24/07/2023, à 20:24

xubu1957

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Montre aussi :

dkms status

C'est pas toujours simple

Dernière modification par xubu1957 (Le 24/07/2023, à 20:49)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 24/07/2023, à 22:06

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à l'attention de xubu1957 ( #8 ):
-------------------------------------------------------

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ dkms status
nvidia/470.199.02, 5.15.0-76-generic, x86_64: installed
nvidia/470.199.02, 5.15.0-78-generic, x86_64: installed
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$

Autres points:
------------------
1) j'ai testé le redémarrage de Windows 11 (au lieu de l'arrêt)  puis redémarrage Ubuntu:
* la souris Bluetooth fonctionne dès l'écran de connexion Ubuntu (mais pas le clavier). Le clavier fonctionne après l'ouverture du bureau Ubuntu.
Par contre la sortie de veille Ubuntu est problématique.
En redémarrant Windows 11, cette fois-ci perte totale de connexion de la souris et du clavier.
=> résultat pas satisfaisant et erratique.
2) Pour mémoire lorsque j'étais sous Ubuntu 20.04, au début l'activation du Bluetooth ne posait pas de problème (à l'époque c'était uniquement pour tester l'interface Bluetooth : je n'ai pas de souris et de clavier Bluetooth). Puis en cours d'utilisation Ubuntu 20.04, l'activation Bluetooth a cessé de fonctionner (résolu avec #1 mais avec 2 restrictions).
3) Lors de ma réponse #6, les 2 1ère commandes ont fait apparaître une myriade de termes en rouge ( bluetooth, blue, net, firmware ) : le rouge me semble bizarre

Question:
------------
Est-ce que mes réponses #6 permettent d'identifier une cause de dysfonctionnement du Bluetooth (dès le GRUB) ?

Conclusion:
---------------
J'attends ton retour. Si pas de solution, je propose d'en rester là car le fonctionnement wireless avec 2 plug USB est satisfaisant aussi bien sur Windows 11 et Ubuntu 22.04. De plus le réveil, par le clavier fonctionne (sortie de veille). Dans les prochains mois, je pense réinstaller complètement en passant à Kutunbu 22.04 (une réinstallation de 0 devrait résoudre ces instabilités apparues en cours d'utilisation Ubuntu 20.04)

Hors ligne

#10 Le 24/07/2023, à 22:17

xubu1957

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

J'aide de manière empirique, mais je n'ai qu'un niveau de lambda.

Fournis :

ubuntu-drivers devices
sudo dmesg

Si Nuliel pouvait intervenir.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 24/07/2023, à 23:33

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à #10:

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:1d.0/0000:03:00.0 ==
modalias : pci:v000010ECd0000C821sv00001A3Bsd00003041bc02sc80i00
vendor   : Realtek Semiconductor Co., Ltd.
model    : RTL8821CE 802.11ac PCIe Wireless Network Adapter
driver   : rtl8821ce-dkms - distro free

== /sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0 ==
modalias : pci:v000010DEd0000174Esv00001043sd000015EFbc03sc02i00
vendor   : NVIDIA Corporation
model    : GM108M [GeForce MX110]
driver   : nvidia-driver-390 - distro non-free
driver   : nvidia-driver-450-server - distro non-free
driver   : nvidia-driver-470 - distro non-free
driver   : nvidia-driver-525 - distro non-free
driver   : nvidia-driver-535 - distro non-free recommended
driver   : nvidia-driver-418-server - distro non-free
driver   : nvidia-driver-535-server - distro non-free
driver   : nvidia-driver-470-server - distro non-free
driver   : nvidia-driver-525-server - distro non-free
driver   : xserver-xorg-video-nouveau - distro free builtin

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ sudo dmesg
[sudo] Mot de passe de gilles : 
[    0.000000] microcode: microcode updated early to revision 0xf4, date = 2022-07-31
[    0.000000] Linux version 5.15.0-78-generic (buildd@lcy02-amd64-008) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #85-Ubuntu SMP Fri Jul 7 15:25:09 UTC 2023 (Ubuntu 5.15.0-78.85-generic 5.15.99)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic root=UUID=79591dfd-e894-4209-be31-dcb4c8260da5 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000098b3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000098b3f000-0x000000009a379fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009a37a000-0x000000009a400fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009a401000-0x000000009a4eefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009a4ef000-0x000000009ab4dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ab4e000-0x000000009ab4efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ab4f000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x94dcd018-0x94dd8657] usable ==> usable
[    0.000000] e820: update [mem 0x94dcd018-0x94dd8657] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000094dcd017] usable
[    0.000000] reserve setup_data: [mem 0x0000000094dcd018-0x0000000094dd8657] usable
[    0.000000] reserve setup_data: [mem 0x0000000094dd8658-0x0000000098b3efff] usable
[    0.000000] reserve setup_data: [mem 0x0000000098b3f000-0x000000009a379fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009a37a000-0x000000009a400fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009a401000-0x000000009a4eefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009a4ef000-0x000000009ab4dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009ab4e000-0x000000009ab4efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009ab4f000-0x000000009fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025dffffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI=0x9a400000 ACPI 2.0=0x9a400014 TPMFinalLog=0x9a47b000 SMBIOS=0x9a953000 SMBIOS 3.0=0x9a952000 MEMATTR=0x96d17098 ESRT=0x94e40f98 MOKvar=0x9a968000 RNG=0x9a394018 TPMEventLog=0x94dd9018 
[    0.000000] random: crng init done
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X712FBC_P1701FB/X712FBC, BIOS X712FBC.304 04/16/2020
[    0.000000] tsc: Detected 2300.000 MHz processor
[    0.000000] tsc: Detected 2299.968 MHz TSC
[    0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -255101732 force to 0
[    0.000352] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000354] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000361] last_pfn = 0x25e000 max_arch_pfn = 0x400000000
[    0.000508] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001253] last_pfn = 0x9ab4f max_arch_pfn = 0x400000000
[    0.012300] esrt: Reserving ESRT space from 0x0000000094e40f98 to 0x0000000094e40fd0.
[    0.012306] e820: update [mem 0x94e40000-0x94e40fff] usable ==> reserved
[    0.012352] Using GB pages for direct mapping
[    0.012852] secureboot: Secure boot enabled
[    0.012853] RAMDISK: [mem 0x9069d000-0x94627fff]
[    0.012858] ACPI: Early table checksum verification disabled
[    0.012861] ACPI: RSDP 0x000000009A400014 000024 (v02 _ASUS_)
[    0.012864] ACPI: XSDT 0x000000009A3FF728 0000F4 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012868] ACPI: FACP 0x000000009A3F5000 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012872] ACPI: DSDT 0x000000009A3B4000 040370 (v02 _ASUS_ Notebook 01072009 INTL 20160527)
[    0.012875] ACPI: FACS 0x000000009A4ED000 000040
[    0.012877] ACPI: MCFG 0x000000009A3FE000 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.012880] ACPI: SSDT 0x000000009A3FC000 001B4A (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.012882] ACPI: SSDT 0x000000009A3F6000 005AC1 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.012885] ACPI: FIDT 0x000000009A3B3000 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012887] ACPI: ECDT 0x000000009A3B2000 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.012889] ACPI: MSDM 0x000000009A3B1000 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.012892] ACPI: SSDT 0x000000009A3AD000 0031C6 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.012894] ACPI: HPET 0x000000009A3AC000 000038 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012896] ACPI: SSDT 0x000000009A3A8000 0032B7 (v02 INTEL  xh_cmud4 00000000 INTL 20160527)
[    0.012899] ACPI: NHLT 0x000000009A3A7000 00002D (v00 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012901] ACPI: LPIT 0x000000009A3A6000 000094 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012904] ACPI: SSDT 0x000000009A3A2000 002720 (v02 _ASUS_ PtidDevc 00001000 INTL 20160527)
[    0.012906] ACPI: SSDT 0x000000009A3A0000 0014E2 (v02 _ASUS_ TbtTypeC 00000000 INTL 20160527)
[    0.012908] ACPI: DBGP 0x000000009A39F000 000034 (v01 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012911] ACPI: DBG2 0x000000009A39E000 000054 (v00 _ASUS_ Notebook 01072009 AMI  01000013)
[    0.012913] ACPI: DMAR 0x000000009A39D000 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.012915] ACPI: SSDT 0x000000009A39C000 0004D7 (v02 SgRef  SgRpSsdt 00001000 INTL 20160527)
[    0.012918] ACPI: BGRT 0x000000009A39B000 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012920] ACPI: UEFI 0x000000009A462000 00063A (v01 INTEL  RstSataE 00000000 ??   00000000)
[    0.012922] ACPI: UEFI 0x000000009A461000 00005C (v01 INTEL  RstSataV 00000000 ??   00000000)
[    0.012925] ACPI: TPM2 0x000000009A39A000 00004C (v04 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.012927] ACPI: SSDT 0x000000009A397000 00230D (v01 OptRef OptTabl  00001000 INTL 20160527)
[    0.012929] ACPI: WSMT 0x000000009A3A5000 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012932] ACPI: APIC 0x000000009A396000 0000BC (v04 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012934] ACPI: FPDT 0x000000009A395000 000044 (v01 _ASUS_ CML-ULT  01072009 AMI  01000013)
[    0.012936] ACPI: Reserving FACP table memory at [mem 0x9a3f5000-0x9a3f5113]
[    0.012937] ACPI: Reserving DSDT table memory at [mem 0x9a3b4000-0x9a3f436f]
[    0.012938] ACPI: Reserving FACS table memory at [mem 0x9a4ed000-0x9a4ed03f]
[    0.012939] ACPI: Reserving MCFG table memory at [mem 0x9a3fe000-0x9a3fe03b]
[    0.012940] ACPI: Reserving SSDT table memory at [mem 0x9a3fc000-0x9a3fdb49]
[    0.012941] ACPI: Reserving SSDT table memory at [mem 0x9a3f6000-0x9a3fbac0]
[    0.012941] ACPI: Reserving FIDT table memory at [mem 0x9a3b3000-0x9a3b309b]
[    0.012942] ACPI: Reserving ECDT table memory at [mem 0x9a3b2000-0x9a3b20c0]
[    0.012943] ACPI: Reserving MSDM table memory at [mem 0x9a3b1000-0x9a3b1054]
[    0.012944] ACPI: Reserving SSDT table memory at [mem 0x9a3ad000-0x9a3b01c5]
[    0.012944] ACPI: Reserving HPET table memory at [mem 0x9a3ac000-0x9a3ac037]
[    0.012945] ACPI: Reserving SSDT table memory at [mem 0x9a3a8000-0x9a3ab2b6]
[    0.012946] ACPI: Reserving NHLT table memory at [mem 0x9a3a7000-0x9a3a702c]
[    0.012947] ACPI: Reserving LPIT table memory at [mem 0x9a3a6000-0x9a3a6093]
[    0.012947] ACPI: Reserving SSDT table memory at [mem 0x9a3a2000-0x9a3a471f]
[    0.012948] ACPI: Reserving SSDT table memory at [mem 0x9a3a0000-0x9a3a14e1]
[    0.012949] ACPI: Reserving DBGP table memory at [mem 0x9a39f000-0x9a39f033]
[    0.012950] ACPI: Reserving DBG2 table memory at [mem 0x9a39e000-0x9a39e053]
[    0.012950] ACPI: Reserving DMAR table memory at [mem 0x9a39d000-0x9a39d0a7]
[    0.012951] ACPI: Reserving SSDT table memory at [mem 0x9a39c000-0x9a39c4d6]
[    0.012952] ACPI: Reserving BGRT table memory at [mem 0x9a39b000-0x9a39b037]
[    0.012953] ACPI: Reserving UEFI table memory at [mem 0x9a462000-0x9a462639]
[    0.012954] ACPI: Reserving UEFI table memory at [mem 0x9a461000-0x9a46105b]
[    0.012954] ACPI: Reserving TPM2 table memory at [mem 0x9a39a000-0x9a39a04b]
[    0.012955] ACPI: Reserving SSDT table memory at [mem 0x9a397000-0x9a39930c]
[    0.012956] ACPI: Reserving WSMT table memory at [mem 0x9a3a5000-0x9a3a5027]
[    0.012957] ACPI: Reserving APIC table memory at [mem 0x9a396000-0x9a3960bb]
[    0.012958] ACPI: Reserving FPDT table memory at [mem 0x9a395000-0x9a395043]
[    0.013325] No NUMA configuration found
[    0.013326] Faking a node at [mem 0x0000000000000000-0x000000025dffffff]
[    0.013333] NODE_DATA(0) allocated [mem 0x25dfd6000-0x25dffffff]
[    0.013601] Zone ranges:
[    0.013601]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013603]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013604]   Normal   [mem 0x0000000100000000-0x000000025dffffff]
[    0.013605]   Device   empty
[    0.013606] Movable zone start for each node
[    0.013608] Early memory node ranges
[    0.013609]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.013610]   node   0: [mem 0x0000000000100000-0x0000000098b3efff]
[    0.013611]   node   0: [mem 0x000000009ab4e000-0x000000009ab4efff]
[    0.013612]   node   0: [mem 0x0000000100000000-0x000000025dffffff]
[    0.013613] Initmem setup node 0 [mem 0x0000000000001000-0x000000025dffffff]
[    0.013616] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013641] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.017486] On node 0, zone DMA32: 8207 pages in unavailable ranges
[    0.026464] On node 0, zone Normal: 21681 pages in unavailable ranges
[    0.026556] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.026569] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[    0.026896] ACPI: PM-Timer IO Port: 0x1808
[    0.026900] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.026902] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.026902] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.026903] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.026904] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.026904] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.026905] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.026905] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.026951] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.026953] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.026955] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.026958] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.026959] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.026967] e820: update [mem 0x95477000-0x954a5fff] usable ==> reserved
[    0.026976] TSC deadline timer available
[    0.026977] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.026991] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.026993] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.026994] PM: hibernation: Registered nosave memory: [mem 0x94dcd000-0x94dcdfff]
[    0.026996] PM: hibernation: Registered nosave memory: [mem 0x94dd8000-0x94dd8fff]
[    0.026997] PM: hibernation: Registered nosave memory: [mem 0x94e40000-0x94e40fff]
[    0.026999] PM: hibernation: Registered nosave memory: [mem 0x95477000-0x954a5fff]
[    0.027000] PM: hibernation: Registered nosave memory: [mem 0x98b3f000-0x9a379fff]
[    0.027001] PM: hibernation: Registered nosave memory: [mem 0x9a37a000-0x9a400fff]
[    0.027001] PM: hibernation: Registered nosave memory: [mem 0x9a401000-0x9a4eefff]
[    0.027002] PM: hibernation: Registered nosave memory: [mem 0x9a4ef000-0x9ab4dfff]
[    0.027003] PM: hibernation: Registered nosave memory: [mem 0x9ab4f000-0x9fffffff]
[    0.027004] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.027004] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.027005] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.027006] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.027006] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.027007] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.027007] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.027008] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.027009] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.027009] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.027010] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.027010] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.027012] [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.027013] Booting paravirtualized kernel on bare hardware
[    0.027015] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.027020] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.027140] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
[    0.027146] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
[    0.027148] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.027171] Built 1 zonelists, mobility grouping on.  Total pages: 2026643
[    0.027172] Policy zone: Normal
[    0.027173] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic root=UUID=79591dfd-e894-4209-be31-dcb4c8260da5 ro quiet splash vt.handoff=7
[    0.027236] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic", will be passed to user space.
[    0.027483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.027635] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.027700] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.047449] Memory: 7837408K/8235896K available (16393K kernel code, 4383K rwdata, 10844K rodata, 3248K init, 18832K bss, 398228K reserved, 0K cma-reserved)
[    0.047547] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.047557] ftrace: allocating 50600 entries in 198 pages
[    0.067633] ftrace: allocated 198 pages with 4 groups
[    0.067715] rcu: Hierarchical RCU implementation.
[    0.067716] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.067717] 	Rude variant of Tasks RCU enabled.
[    0.067718] 	Tracing variant of Tasks RCU enabled.
[    0.067718] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.067719] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.070771] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.071185] Console: colour dummy device 80x25
[    0.071200] printk: console [tty0] enabled
[    0.071215] ACPI: Core revision 20210730
[    0.071407] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.071408] APIC: Switch to symmetric I/O mode setup
[    0.071409] DMAR: Host address width 39
[    0.071410] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.071414] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.071416] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.071418] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.071420] DMAR: RMRR base: 0x0000009a6e3000 end: 0x0000009a92cfff
[    0.071422] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[    0.071424] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.071425] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.071426] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.073174] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.073175] x2apic enabled
[    0.073199] Switched APIC routing to cluster x2apic.
[    0.078121] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
[    0.078126] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872)
[    0.078129] pid_max: default: 32768 minimum: 301
[    0.080438] LSM: Security Framework initializing
[    0.080446] landlock: Up and running.
[    0.080447] Yama: becoming mindful.
[    0.080464] AppArmor: AppArmor initialized
[    0.080493] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.080504] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.080684] x86/cpu: VMX (outside TXT) disabled by BIOS
[    0.080688] x86/cpu: SGX disabled by BIOS.
[    0.080692] CPU0: Thermal monitoring enabled (TM1)
[    0.080732] process: using mwait in idle threads
[    0.080734] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.080735] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.080737] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.080739] Spectre V2 : Mitigation: Enhanced IBRS
[    0.080739] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.080740] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.080740] RETBleed: Mitigation: Enhanced IBRS
[    0.080741] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.080742] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.080745] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.080746] SRBDS: Mitigation: Microcode
[    0.082124] Freeing SMP alternatives memory: 44K
[    0.082124] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1914
[    0.082124] smpboot: CPU0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.082124] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.082124] ... version:                4
[    0.082124] ... bit width:              48
[    0.082124] ... generic registers:      4
[    0.082124] ... value mask:             0000ffffffffffff
[    0.082124] ... max period:             00007fffffffffff
[    0.082124] ... fixed-purpose events:   3
[    0.082124] ... event mask:             000000070000000f
[    0.082124] rcu: Hierarchical SRCU implementation.
[    0.082124] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.082124] smp: Bringing up secondary CPUs ...
[    0.082124] x86: Booting SMP configuration:
[    0.082124] .... node  #0, CPUs:      #1
[    0.010978] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[    0.082124]  #2 #3 #4
[    0.083711] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.083711]  #5 #6 #7
[    0.086539] smp: Brought up 1 node, 8 CPUs
[    0.086539] smpboot: Max logical packages: 1
[    0.086539] smpboot: Total of 8 processors activated (36799.48 BogoMIPS)
[    0.088735] devtmpfs: initialized
[    0.088735] x86/mm: Memory block size: 128MB
[    0.088735] ACPI: PM: Registering ACPI NVS region [mem 0x9a401000-0x9a4eefff] (974848 bytes)
[    0.088735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088735] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.088735] pinctrl core: initialized pinctrl subsystem
[    0.090128] PM: RTC time: 21:24:49, date: 2023-07-24
[    0.090214] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.090323] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.090366] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.090406] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.090410] audit: initializing netlink subsys (disabled)
[    0.090414] audit: type=2000 audit(1690233889.012:1): state=initialized audit_enabled=0 res=1
[    0.090414] thermal_sys: Registered thermal governor 'fair_share'
[    0.090414] thermal_sys: Registered thermal governor 'bang_bang'
[    0.090414] thermal_sys: Registered thermal governor 'step_wise'
[    0.090414] thermal_sys: Registered thermal governor 'user_space'
[    0.090414] thermal_sys: Registered thermal governor 'power_allocator'
[    0.090414] EISA bus registered
[    0.090414] cpuidle: using governor ladder
[    0.090414] cpuidle: using governor menu
[    0.090414] ACPI: bus type PCI registered
[    0.090414] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.090414] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.090414] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.090414] PCI: Using configuration type 1 for base access
[    0.090414] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.090967] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.090970] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.090970] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.090970] fbcon: Taking over console
[    0.090970] ACPI: Added _OSI(Module Device)
[    0.090970] ACPI: Added _OSI(Processor Device)
[    0.090970] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.090970] ACPI: Added _OSI(Processor Aggregator Device)
[    0.090970] ACPI: Added _OSI(Linux-Dell-Video)
[    0.090970] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.090970] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.128562] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.128570] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.128573] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.128575] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.128578] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.128580] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.129815] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.129819] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.129822] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.129823] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.129826] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.129828] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.131060] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.131064] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.131066] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.131068] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.131071] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.131073] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.132294] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.132298] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.132301] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.132302] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.132306] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.132308] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.133537] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.133541] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.133544] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.133545] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.133548] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.133551] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.134772] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.134776] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.134778] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.134780] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.134783] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.134785] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.136011] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.136015] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.136018] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.136019] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.136022] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.136024] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.137248] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.137252] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.137255] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.137256] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.137259] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.137262] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.138490] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.138494] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.138496] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.138498] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.138501] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.138503] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.139722] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.139727] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.139729] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.139730] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.139734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.139736] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141002] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141006] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141008] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141010] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141013] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141015] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141018] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141021] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141023] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141024] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141028] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141030] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141055] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141059] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141061] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141063] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141066] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141068] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141091] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141095] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141097] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141099] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141102] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141104] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141127] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141131] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141133] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141134] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141137] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141139] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141163] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141166] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141168] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141170] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141173] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141175] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141198] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141202] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141204] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141205] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141208] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141211] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141234] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141237] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141239] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.141241] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20210730/dswload2-326)
[    0.141244] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
[    0.141246] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.143019] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.144236] ACPI: EC: EC started
[    0.144236] ACPI: EC: interrupt blocked
[    0.145289] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.145290] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.149461] ACPI: Dynamic OEM Table Load:
[    0.149470] ACPI: SSDT 0xFFFF9888C01F8F00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.150264] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.151509] ACPI: Dynamic OEM Table Load:
[    0.151514] ACPI: SSDT 0xFFFF9888C11CC400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.152369] ACPI: Dynamic OEM Table Load:
[    0.152373] ACPI: SSDT 0xFFFF9888C14A2000 0005A2 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.153299] ACPI: Dynamic OEM Table Load:
[    0.153303] ACPI: SSDT 0xFFFF9888C02B4200 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.154098] ACPI: Dynamic OEM Table Load:
[    0.154103] ACPI: SSDT 0xFFFF9888C007F000 000BE2 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.155097] ACPI: Dynamic OEM Table Load:
[    0.155102] ACPI: SSDT 0xFFFF9888C14A7000 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.156045] ACPI: Dynamic OEM Table Load:
[    0.156049] ACPI: SSDT 0xFFFF9888C11CEC00 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.156987] ACPI: Dynamic OEM Table Load:
[    0.156992] ACPI: SSDT 0xFFFF9888C0078000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.158509] ACPI: Dynamic OEM Table Load:
[    0.158514] ACPI: SSDT 0xFFFF9888C11C9400 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.161942] ACPI: Interpreter enabled
[    0.161971] ACPI: PM: (supports S0 S3 S4 S5)
[    0.161972] ACPI: Using IOAPIC for interrupt routing
[    0.162002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.162003] PCI: Using E820 reservations for host bridge windows
[    0.162916] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.165890] ACPI: PM: Power Resource [PC05]
[    0.168746] ACPI: PM: Power Resource [USBC]
[    0.171089] ACPI: PM: Power Resource [V0PR]
[    0.171255] ACPI: PM: Power Resource [V1PR]
[    0.171414] ACPI: PM: Power Resource [V2PR]
[    0.173247] ACPI: PM: Power Resource [WRST]
[    0.176110] ACPI: PM: Power Resource [PIN]
[    0.176425] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.176430] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.178551] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.179495] PCI host bridge to bus 0000:00
[    0.179497] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.179499] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.179500] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.179501] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.179502] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.179503] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.179504] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.179638] pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000
[    0.179951] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.179957] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.179962] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.179964] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.179975] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.179977] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.180233] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.180240] pci 0000:00:04.0: reg 0x10: [mem 0xc4410000-0xc4417fff 64bit]
[    0.180523] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.180530] pci 0000:00:08.0: reg 0x10: [mem 0xc442b000-0xc442bfff 64bit]
[    0.180772] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.180788] pci 0000:00:12.0: reg 0x10: [mem 0xc442a000-0xc442afff 64bit]
[    0.181118] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.181133] pci 0000:00:14.0: reg 0x10: [mem 0xc4400000-0xc440ffff 64bit]
[    0.181187] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.181693] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.181709] pci 0000:00:14.2: reg 0x10: [mem 0xc441e000-0xc441ffff 64bit]
[    0.181718] pci 0000:00:14.2: reg 0x18: [mem 0xc4429000-0xc4429fff 64bit]
[    0.182009] pci 0000:00:14.5: [8086:02f5] type 00 class 0x080501
[    0.182027] pci 0000:00:14.5: reg 0x10: [mem 0xc4428000-0xc4428fff 64bit]
[    0.182515] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.182537] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.183131] pci 0000:00:15.1: [8086:02e9] type 00 class 0x0c8000
[    0.183186] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.183705] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.183724] pci 0000:00:16.0: reg 0x10: [mem 0xc4425000-0xc4425fff 64bit]
[    0.183793] pci 0000:00:16.0: PME# supported from D3hot
[    0.184339] pci 0000:00:17.0: [8086:02d7] type 00 class 0x010400
[    0.184353] pci 0000:00:17.0: reg 0x10: [mem 0xc441c000-0xc441dfff]
[    0.184361] pci 0000:00:17.0: reg 0x14: [mem 0xc4424000-0xc44240ff]
[    0.184369] pci 0000:00:17.0: reg 0x18: [io  0x5090-0x5097]
[    0.184377] pci 0000:00:17.0: reg 0x1c: [io  0x5080-0x5083]
[    0.184385] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.184393] pci 0000:00:17.0: reg 0x24: [mem 0xc4423000-0xc44237ff]
[    0.184430] pci 0000:00:17.0: PME# supported from D3hot
[    0.184857] pci 0000:00:1c.0: [8086:02b8] type 01 class 0x060400
[    0.184922] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.185565] pci 0000:00:1c.4: [8086:02bc] type 01 class 0x060400
[    0.185628] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.185647] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.186285] pci 0000:00:1d.0: [8086:02b1] type 01 class 0x060400
[    0.186348] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.186367] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.187002] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400
[    0.187074] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.187098] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.187805] pci 0000:00:1e.0: [8086:02a8] type 00 class 0x078000
[    0.187863] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.188506] pci 0000:00:1e.2: [8086:02aa] type 00 class 0x0c8000
[    0.188529] pci 0000:00:1e.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.189085] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.189587] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040380
[    0.189617] pci 0000:00:1f.3: reg 0x10: [mem 0xc4418000-0xc441bfff 64bit]
[    0.189654] pci 0000:00:1f.3: reg 0x20: [mem 0xc4100000-0xc41fffff 64bit]
[    0.189726] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.190753] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.190777] pci 0000:00:1f.4: reg 0x10: [mem 0xc4420000-0xc44200ff 64bit]
[    0.190804] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.191090] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.191105] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.191310] acpiphp: Slot [1] registered
[    0.191318] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.191380] pci 0000:02:00.0: [10de:174e] type 00 class 0x030200
[    0.191393] pci 0000:02:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
[    0.191404] pci 0000:02:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.191414] pci 0000:02:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.191421] pci 0000:02:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.191428] pci 0000:02:00.0: reg 0x30: [mem 0xc4000000-0xc407ffff pref]
[    0.191444] pci 0000:02:00.0: Enabling HDA controller
[    0.191762] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.191764] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.191766] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc40fffff]
[    0.191770] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.191851] pci 0000:03:00.0: [10ec:c821] type 00 class 0x028000
[    0.191871] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.191894] pci 0000:03:00.0: reg 0x18: [mem 0xc4300000-0xc430ffff 64bit]
[    0.192015] pci 0000:03:00.0: supports D1 D2
[    0.192016] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192183] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.192186] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.192187] pci 0000:00:1d.0:   bridge window [mem 0xc4300000-0xc43fffff]
[    0.192307] pci 0000:04:00.0: [8086:f1a8] type 00 class 0x010802
[    0.192330] pci 0000:04:00.0: reg 0x10: [mem 0xc4200000-0xc4203fff 64bit]
[    0.192613] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.192617] pci 0000:00:1d.4:   bridge window [mem 0xc4200000-0xc42fffff]
[    0.194070] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.194137] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.194201] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.194265] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.194329] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.194392] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.194456] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.194519] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.198790] ACPI: EC: interrupt unblocked
[    0.198791] ACPI: EC: event unblocked
[    0.198807] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.198808] ACPI: EC: GPE=0x50
[    0.198808] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete
[    0.198810] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.198848] iommu: Default domain type: Translated 
[    0.198848] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.198848] SCSI subsystem initialized
[    0.198848] libata version 3.00 loaded.
[    0.198848] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.198848] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.198848] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.198848] vgaarb: loaded
[    0.198848] ACPI: bus type USB registered
[    0.198848] usbcore: registered new interface driver usbfs
[    0.198848] usbcore: registered new interface driver hub
[    0.198848] usbcore: registered new device driver usb
[    0.198848] pps_core: LinuxPPS API ver. 1 registered
[    0.198848] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.198848] PTP clock support registered
[    0.198848] EDAC MC: Ver: 3.0.0
[    0.198848] Registered efivars operations
[    0.198848] NetLabel: Initializing
[    0.198848] NetLabel:  domain hash size = 128
[    0.198848] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.198848] NetLabel:  unlabeled traffic allowed by default
[    0.198848] PCI: Using ACPI for IRQ routing
[    0.242575] PCI: pci_cache_line_size set to 64 bytes
[    0.242869] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.242871] e820: reserve RAM buffer [mem 0x94dcd018-0x97ffffff]
[    0.242872] e820: reserve RAM buffer [mem 0x94e40000-0x97ffffff]
[    0.242872] e820: reserve RAM buffer [mem 0x95477000-0x97ffffff]
[    0.242873] e820: reserve RAM buffer [mem 0x98b3f000-0x9bffffff]
[    0.242874] e820: reserve RAM buffer [mem 0x9ab4f000-0x9bffffff]
[    0.242874] e820: reserve RAM buffer [mem 0x25e000000-0x25fffffff]
[    0.242931] clocksource: Switched to clocksource tsc-early
[    0.248179] VFS: Disk quotas dquot_6.6.0
[    0.248190] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.248263] AppArmor: AppArmor Filesystem Enabled
[    0.248293] pnp: PnP ACPI init
[    0.248384] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.248553] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.248554] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.248646] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.248919] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.248921] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.248922] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.248923] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.248924] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.248926] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.248927] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.248928] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.249045] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.249046] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.249047] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.249048] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.249049] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.249050] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.249051] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.249284] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.249937] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.250105] pnp: PnP ACPI: found 8 devices
[    0.255435] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.255472] NET: Registered PF_INET protocol family
[    0.255527] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.256223] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.256242] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.256271] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.256348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.256393] TCP: Hash tables configured (established 65536 bind 65536)
[    0.256434] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.256455] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.256470] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.256500] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.256504] NET: Registered PF_XDP protocol family
[    0.256513] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256515] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256518] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256519] clipped [mem size 0x00010000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256521] pci 0000:00:15.0: BAR 0: assigned [mem 0xc4421000-0xc4421fff 64bit]
[    0.256572] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256573] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256575] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256576] clipped [mem size 0x00010000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256578] pci 0000:00:15.1: BAR 0: assigned [mem 0xc4422000-0xc4422fff 64bit]
[    0.256619] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256620] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256622] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256623] clipped [mem size 0x00010000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256625] pci 0000:00:1e.0: BAR 0: assigned [mem 0xc4426000-0xc4426fff 64bit]
[    0.256666] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256667] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffe0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256668] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256669] clipped [mem size 0x00010000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.256671] pci 0000:00:1e.2: BAR 0: assigned [mem 0xc4427000-0xc4427fff 64bit]
[    0.256713] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.256722] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.256723] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.256726] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc40fffff]
[    0.256728] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.256731] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.256732] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.256735] pci 0000:00:1d.0:   bridge window [mem 0xc4300000-0xc43fffff]
[    0.256739] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.256742] pci 0000:00:1d.4:   bridge window [mem 0xc4200000-0xc42fffff]
[    0.256747] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.256748] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.256749] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.256750] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    0.256751] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff window]
[    0.256752] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.256753] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.256754] pci_bus 0000:02: resource 1 [mem 0xc3000000-0xc40fffff]
[    0.256755] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.256756] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.256756] pci_bus 0000:03: resource 1 [mem 0xc4300000-0xc43fffff]
[    0.256757] pci_bus 0000:04: resource 1 [mem 0xc4200000-0xc42fffff]
[    0.257280] PCI: CLS 64 bytes, default 64
[    0.257300] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.257301] software IO TLB: mapped [mem 0x000000008c69d000-0x000000009069d000] (64MB)
[    0.257312] Trying to unpack rootfs image as initramfs...
[    0.266242] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.266567] Initialise system trusted keyrings
[    0.266573] Key type blacklist registered
[    0.266594] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.267356] zbud: loaded
[    0.267506] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.267585] fuse: init (API version 7.34)
[    0.267677] integrity: Platform Keyring initialized
[    0.273330] Key type asymmetric registered
[    0.273332] Asymmetric key parser 'x509' registered
[    0.273341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.273363] io scheduler mq-deadline registered
[    0.273633] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.273857] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[    0.273899] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[    0.273927] pcieport 0000:00:1c.4: DPC: enabled with IRQ 123
[    0.273928] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.274097] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[    0.274146] pcieport 0000:00:1d.0: AER: enabled with IRQ 124
[    0.274189] pcieport 0000:00:1d.0: DPC: enabled with IRQ 124
[    0.274190] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.274358] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    0.274402] pcieport 0000:00:1d.4: AER: enabled with IRQ 125
[    0.274429] pcieport 0000:00:1d.4: DPC: enabled with IRQ 125
[    0.274430] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.274502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.275066] ACPI: AC: AC Adapter [AC0] (on-line)
[    0.275105] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input0
[    0.275116] ACPI: button: Lid Switch [LID]
[    0.275142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.275152] ACPI: button: Power Button [PWRB]
[    0.275168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.275269] ACPI: button: Power Button [PWRF]
[    0.275388] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1914
[    0.276810] thermal LNXTHERM:00: registered as thermal_zone0
[    0.276812] ACPI: thermal: Thermal Zone [THRM] (88 C)
[    0.276982] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.296318] hpet_acpi_add: no address or irqs in _CRS
[    0.296352] Linux agpgart interface v0.103
[    0.297060] ACPI: battery: Slot [BAT0] (battery present)
[    0.305823] loop: module loaded
[    0.305984] tun: Universal TUN/TAP device driver, 1.6
[    0.305998] PPP generic driver version 2.4.2
[    0.306023] VFIO - User Level meta-driver version: 0.3
[    0.306108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.306110] ehci-pci: EHCI PCI platform driver
[    0.306115] ehci-platform: EHCI generic platform driver
[    0.306120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.306121] ohci-pci: OHCI PCI platform driver
[    0.306133] ohci-platform: OHCI generic platform driver
[    0.306137] uhci_hcd: USB Universal Host Controller Interface driver
[    0.306166] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    0.306168] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.309944] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.310029] mousedev: PS/2 mouse device common for all mice
[    0.310123] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.311191] rtc_cmos rtc_cmos: registered as rtc0
[    0.311418] rtc_cmos rtc_cmos: setting system clock to 2023-07-24T21:24:49 UTC (1690233889)
[    0.311440] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.311444] i2c_dev: i2c /dev entries driver
[    0.311582] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.311607] device-mapper: uevent: version 1.0.3
[    0.311668] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.311680] platform eisa.0: Probing EISA bus 0
[    0.311681] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.311682] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.311683] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.311684] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.311685] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.311685] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.311686] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.311687] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.311687] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.311688] platform eisa.0: EISA: Detected 0 cards
[    0.311691] intel_pstate: Intel P-state driver initializing
[    0.312008] intel_pstate: HWP enabled
[    0.312048] ledtrig-cpu: registered to indicate activity on CPUs
[    0.312062] efifb: probing for efifb
[    0.312078] efifb: showing boot graphics
[    0.312662] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[    0.312663] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.312664] efifb: scrolling: redraw
[    0.312665] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.312720] Console: switching to colour frame buffer device 240x67
[    0.315061] fb0: EFI VGA frame buffer device
[    0.315065] EFI Variables Facility v0.08 2004-May-17
[    0.320446] intel_pmc_core INT33A1:00:  initialized
[    0.320520] drop_monitor: Initializing network drop monitor service
[    0.320657] NET: Registered PF_INET6 protocol family
[    0.326817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.561464] Freeing initrd memory: 65068K
[    0.565481] Segment Routing with IPv6
[    0.565490] In-situ OAM (IOAM) with IPv6
[    0.565508] NET: Registered PF_PACKET protocol family
[    0.565537] Key type dns_resolver registered
[    0.566036] microcode: sig=0x806ec, pf=0x4, revision=0xf4
[    0.566122] microcode: Microcode Update Driver: v2.2.
[    0.566131] IPI shorthand broadcast: enabled
[    0.566142] sched_clock: Marking stable (559147407, 6978971)->(594825012, -28698634)
[    0.566386] registered taskstats version 1
[    0.566561] Loading compiled-in X.509 certificates
[    0.566975] Loaded X.509 cert 'Build time autogenerated kernel key: 9d82e5e7ad5edec3b7fd52847c6ba9a5bea7ed9c'
[    0.567345] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.567712] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.567712] blacklist: Loading compiled-in revocation X.509 certificates
[    0.567723] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.567733] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.567742] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.567752] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.567762] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.567771] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.567783] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.567792] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.567918] zswap: loaded using pool lzo/zbud
[    0.568204] Key type .fscrypt registered
[    0.568205] Key type fscrypt-provisioning registered
[    0.568350] Key type trusted registered
[    0.569803] Key type encrypted registered
[    0.569806] AppArmor: AppArmor sha1 policy hashing enabled
[    0.570009] integrity: Loading X.509 certificate: UEFI:db
[    0.570170] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.570171] integrity: Loading X.509 certificate: UEFI:db
[    0.570292] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.570292] integrity: Loading X.509 certificate: UEFI:db
[    0.570305] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.570306] integrity: Loading X.509 certificate: UEFI:db
[    0.570318] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.570319] integrity: Loading X.509 certificate: UEFI:db
[    0.570440] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.570953] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.571078] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.571079] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.571197] integrity: Loaded X.509 cert 'ubuntu Secure Boot Module Signature key: f2c6520fda6d7a8d7a270dfd3d6f52bcfdc18657'
[    0.571200] Loading compiled-in module X.509 certificates
[    0.571571] Loaded X.509 cert 'Build time autogenerated kernel key: 9d82e5e7ad5edec3b7fd52847c6ba9a5bea7ed9c'
[    0.571572] ima: Allocated hash algorithm: sha1
[    0.588740] ima: No architecture policies found
[    0.588754] evm: Initialising EVM extended attributes:
[    0.588755] evm: security.selinux
[    0.588756] evm: security.SMACK64
[    0.588758] evm: security.SMACK64EXEC
[    0.588759] evm: security.SMACK64TRANSMUTE
[    0.588760] evm: security.SMACK64MMAP
[    0.588761] evm: security.apparmor
[    0.588761] evm: security.ima
[    0.588762] evm: security.capability
[    0.588763] evm: HMAC attrs: 0x1
[    0.589168] PM:   Magic number: 15:413:450
[    0.589174]  machinecheck: hash matches
[    0.589449] RAS: Correctable Errors collector initialized.
[    0.589455] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7
[    0.591085] Freeing unused decrypted memory: 2036K
[    0.591767] Freeing unused kernel image (initmem) memory: 3248K
[    0.630304] Write protecting the kernel read-only data: 30720k
[    0.631188] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.631653] Freeing unused kernel image (rodata/data gap) memory: 1444K
[    0.660940] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.660947] Run /init as init process
[    0.660949]   with arguments:
[    0.660951]     /init
[    0.660953]     splash
[    0.660954]   with environment:
[    0.660955]     HOME=/
[    0.660956]     TERM=linux
[    0.660957]     BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic
[    0.745867] hid: raw HID events driver (C) Jiri Kosina
[    0.746468] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    0.746542] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    0.751966] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.751974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.752245] sdhci: Secure Digital Host Controller Interface driver
[    0.752247] sdhci: Copyright(c) Pierre Ossman
[    0.753061] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.753294] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.753298] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.753300] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.753689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.753692] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.753694] usb usb1: Product: xHCI Host Controller
[    0.753695] usb usb1: Manufacturer: Linux 5.15.0-78-generic xhci-hcd
[    0.753696] usb usb1: SerialNumber: 0000:00:14.0
[    0.753829] hub 1-0:1.0: USB hub found
[    0.754254] hub 1-0:1.0: 12 ports detected
[    0.754926] ahci 0000:00:17.0: version 3.0
[    0.755229] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl RAID mode
[    0.755235] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[    0.755527] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:02f5] (rev 0)
[    0.756955] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.756959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756962] usb usb2: Product: xHCI Host Controller
[    0.756963] usb usb2: Manufacturer: Linux 5.15.0-78-generic xhci-hcd
[    0.756965] usb usb2: SerialNumber: 0000:00:14.0
[    0.757156] hub 2-0:1.0: USB hub found
[    0.757170] hub 2-0:1.0: 6 ports detected
[    0.757332] mmc0: SDHCI controller on PCI [0000:00:14.5] using ADMA 64-bit
[    0.757467] usb: port power management may be unreliable
[    0.758240] scsi host0: ahci
[    0.758315] ata1: SATA max UDMA/133 abar m2048@0xc4423000 port 0xc4423100 irq 127
[    0.758989] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.759054] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.760498] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    0.774189] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    0.774625] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.802227] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    0.802712] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    0.834174] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    0.834427] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    0.854375] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[    0.854683] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    1.074382] ata1: SATA link down (SStatus 4 SControl 300)
[    1.081686] nvme nvme0: pci function 0000:04:00.0
[    1.083525] asus_wmi: ASUS WMI generic driver loaded
[    1.088201] input: ELAN1300:00 04F3:3087 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input4
[    1.088490] input: ELAN1300:00 04F3:3087 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input5
[    1.088759] hid-generic 0018:04F3:3087.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3087] on i2c-ELAN1300:00
[    1.090157] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.091413] nvme nvme0: 8/0/0 default/read/poll queues
[    1.095505]  nvme0n1: p1 p2 p3 p4 p5 p6
[    1.290219] tsc: Refined TSC clocksource calibration: 2304.003 MHz
[    1.290233] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135fabfc56, max_idle_ns: 440795260950 ns
[    1.290309] clocksource: Switched to clocksource tsc
[    1.296854] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    1.431148] systemd[1]: Inserted module 'autofs4'
[    1.459956] systemd[1]: systemd 249.11-0ubuntu3.9 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    1.478349] systemd[1]: Detected architecture x86-64.
[    1.478834] systemd[1]: Hostname set to <gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB>.
[    1.480524] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[    1.497713] systemd-fstab-generator[323]: Ignoring "nofail" option for root device
[    1.497728] systemd-fstab-generator[323]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[    1.497857] systemd-fstab-generator[323]: Failed to create unit file /run/systemd/generator/home.mount, as it already exists. Duplicate entry in /etc/fstab?
[    1.544149] systemd[315]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[    1.595243] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[    1.595249] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.595252] usb 1-2: Product: USB2.0 Hub
[    1.595255] usb 1-2: Manufacturer: GenesysLogic
[    1.596893] hub 1-2:1.0: USB hub found
[    1.598529] hub 1-2:1.0: 4 ports detected
[    1.682109] systemd[1]: Queued start job for default target Graphical Interface.
[    1.682916] systemd[1]: Created slice Slice /system/modprobe.
[    1.683098] systemd[1]: Created slice Slice /system/systemd-fsck.
[    1.683217] systemd[1]: Created slice User and Session Slice.
[    1.683254] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.683345] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.683389] systemd[1]: Reached target Remote File Systems.
[    1.683401] systemd[1]: Reached target Slice Units.
[    1.683412] systemd[1]: Reached target Mounting snaps.
[    1.683429] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.683994] systemd[1]: Listening on Syslog Socket.
[    1.684044] systemd[1]: Listening on fsck to fsckd communication Socket.
[    1.684076] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    1.684173] systemd[1]: Listening on Journal Audit Socket.
[    1.684218] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.684272] systemd[1]: Listening on Journal Socket.
[    1.684349] systemd[1]: Listening on udev Control Socket.
[    1.684397] systemd[1]: Listening on udev Kernel Socket.
[    1.684769] systemd[1]: Mounting Huge Pages File System...
[    1.685171] systemd[1]: Mounting POSIX Message Queue File System...
[    1.685626] systemd[1]: Mounting Kernel Debug File System...
[    1.686018] systemd[1]: Mounting Kernel Trace File System...
[    1.687245] systemd[1]: Starting Journal Service...
[    1.688026] systemd[1]: Starting Set the console keyboard layout...
[    1.688608] systemd[1]: Starting Create List of Static Device Nodes...
[    1.689195] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[    1.689885] systemd[1]: Starting Load Kernel Module configfs...
[    1.690461] systemd[1]: Starting Load Kernel Module drm...
[    1.691088] systemd[1]: Starting Load Kernel Module efi_pstore...
[    1.692000] systemd[1]: Starting Load Kernel Module fuse...
[    1.693140] systemd[1]: Starting Load Kernel Module pstore_blk...
[    1.694136] systemd[1]: Starting Load Kernel Module pstore_zone...
[    1.695150] systemd[1]: Starting Load Kernel Module ramoops...
[    1.695369] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    1.697397] systemd[1]: Starting Load Kernel Modules...
[    1.698180] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.699228] systemd[1]: Starting Coldplug All udev Devices...
[    1.701103] systemd[1]: Mounted Huge Pages File System.
[    1.701215] systemd[1]: Mounted POSIX Message Queue File System.
[    1.701304] systemd[1]: Mounted Kernel Debug File System.
[    1.701400] systemd[1]: Mounted Kernel Trace File System.
[    1.701667] systemd[1]: Finished Create List of Static Device Nodes.
[    1.701890] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    1.702058] systemd[1]: Finished Load Kernel Module configfs.
[    1.702303] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    1.702723] systemd[1]: Finished Load Kernel Module fuse.
[    1.702981] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
[    1.703182] systemd[1]: Finished Load Kernel Module pstore_blk.
[    1.703431] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
[    1.703437] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    1.703538] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    1.703623] systemd[1]: Finished Load Kernel Module pstore_zone.
[    1.703687] pstore: Using crash dump compression: deflate
[    1.703694] pstore: Registered efi as persistent store backend
[    1.704818] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    1.704981] systemd[1]: Finished Load Kernel Module efi_pstore.
[    1.705216] systemd[1]: modprobe@ramoops.service: Deactivated successfully.
[    1.705410] systemd[1]: Finished Load Kernel Module ramoops.
[    1.705793] systemd[1]: Finished Remount Root and Kernel File Systems.
[    1.706534] systemd[1]: Activating swap /swapfile...
[    1.707261] systemd[1]: Mounting FUSE Control File System...
[    1.708029] systemd[1]: Mounting Kernel Configuration File System...
[    1.709106] systemd[1]: Starting Load/Save Random Seed...
[    1.710042] Adding 1158168k swap on /swapfile.  Priority:-2 extents:5 across:1190936k SSFS
[    1.710071] systemd[1]: Starting Create System Users...
[    1.710556] lp: driver loaded but no devices found
[    1.710834] systemd[1]: Activated swap /swapfile.
[    1.712273] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    1.712613] systemd[1]: Finished Load Kernel Module drm.
[    1.712835] systemd[1]: Mounted FUSE Control File System.
[    1.712936] systemd[1]: Mounted Kernel Configuration File System.
[    1.712995] systemd[1]: Reached target Swaps.
[    1.714293] ppdev: user-space parallel port driver
[    1.717629] systemd[1]: Finished Load/Save Random Seed.
[    1.717732] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    1.718249] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.723300] systemd[1]: Finished Create System Users.
[    1.724272] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.729827] systemd[1]: Started Journal Service.
[    1.734059] systemd-journald[339]: Received client request to flush runtime journal.
[    1.744606] usb 2-3: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
[    1.744610] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.744611] usb 2-3: Product: USB3.0 Hub
[    1.744612] usb 2-3: Manufacturer: GenesysLogic
[    1.745448] hub 2-3:1.0: USB hub found
[    1.745705] hub 2-3:1.0: 4 ports detected
[    1.751206] loop0: detected capacity change from 0 to 8
[    1.753827] loop1: detected capacity change from 0 to 242136
[    1.755562] loop2: detected capacity change from 0 to 242136
[    1.757088] loop3: detected capacity change from 0 to 129936
[    1.758593] loop4: detected capacity change from 0 to 129944
[    1.759940] loop5: detected capacity change from 0 to 151256
[    1.761116] loop6: detected capacity change from 0 to 151256
[    1.762321] loop7: detected capacity change from 0 to 500704
[    1.765694] loop8: detected capacity change from 0 to 501768
[    1.765888] loop9: detected capacity change from 0 to 716168
[    1.768114] loop10: detected capacity change from 0 to 716176
[    1.769928] loop11: detected capacity change from 0 to 955472
[    1.770875] loop12: detected capacity change from 0 to 994336
[    1.772606] loop13: detected capacity change from 0 to 187776
[    1.775047] loop14: detected capacity change from 0 to 75960
[    1.776115] loop15: detected capacity change from 0 to 22896
[    1.777863] loop16: detected capacity change from 0 to 895688
[    1.779863] loop17: detected capacity change from 0 to 919400
[    1.781363] loop18: detected capacity change from 0 to 459440
[    1.782027] loop19: detected capacity change from 0 to 459512
[    1.783254] loop20: detected capacity change from 0 to 25240
[    1.784019] loop21: detected capacity change from 0 to 109072
[    1.785793] loop22: detected capacity change from 0 to 904
[    1.870143] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.917604] ACPI BIOS Error (bug): Could not resolve symbol [\DPPP], AE_NOT_FOUND (20210730/psargs-330)

[    1.917674] No Local Variables are initialized for Method [IDSP]

[    1.917677] No Arguments are initialized for method [IDSP]

[    1.917680] ACPI Error: Aborting method \_SB.IETM.IDSP due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    1.917775] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20210730/nsprepkg-94)
[    1.990389] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    2.003837] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.005812] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.005941] intel_rapl_common: Found RAPL domain package
[    2.005944] intel_rapl_common: Found RAPL domain dram
[    2.034767] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[    2.034774] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.034776] usb 1-3: Product: USB Receiver
[    2.034777] usb 1-3: Manufacturer: Logitech
[    2.037758] dw-apb-uart.2: ttyS4 at MMIO 0xc4426000 (irq = 20, base_baud = 7500000) is a 16550A
[    2.057018] asus_wmi: Initialization: 0x1
[    2.057056] asus_wmi: BIOS WMI version: 9.0
[    2.057081] asus_wmi: SFUN value: 0x21
[    2.057083] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    2.057084] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    2.061401] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[    2.061707] ------------[ cut here ]------------
[    2.061708] WARNING: CPU: 7 PID: 500 at drivers/spi/spidev.c:740 spidev_probe+0x1ee/0x200 [spidev]
[    2.061714] Modules linked in: wmi_bmof asus_nb_wmi(+) serio_raw cfg80211(+) snd spidev drm_kms_helper(+) soundcore cec 8250_dw rc_core mei_me libarc4 i2c_algo_bit processor_thermal_device_pci_legacy processor_thermal_device fb_sys_fops processor_thermal_rfim syscopyarea mei hid_multitouch(+) processor_thermal_mbox sysfillrect processor_thermal_rapl intel_rapl_common intel_pch_thermal sysimgblt intel_soc_dts_iosf int3403_thermal int340x_thermal_zone int3400_thermal mac_hid acpi_thermal_rel acpi_tad acpi_pad sch_fq_codel msr parport_pc ppdev lp parport drm ramoops pstore_blk reed_solomon pstore_zone efi_pstore ip_tables x_tables autofs4 spi_pxa2xx_platform dw_dmac mfd_aaeon hid_generic dw_dmac_core asus_wmi nvme sparse_keymap platform_profile crc32_pclmul nvme_core i2c_i801 i2c_smbus sdhci_pci intel_lpss_pci ahci cqhci intel_lpss libahci sdhci idma64 xhci_pci xhci_pci_renesas i2c_hid_acpi i2c_hid hid pinctrl_cannonlake wmi video
[    2.061751] CPU: 7 PID: 500 Comm: sh Not tainted 5.15.0-78-generic #85-Ubuntu
[    2.061753] Hardware name: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X712FBC_P1701FB/X712FBC, BIOS X712FBC.304 04/16/2020
[    2.061754] RIP: 0010:spidev_probe+0x1ee/0x200 [spidev]
[    2.061756] Code: 01 0f 85 5e fe ff ff e9 fb 0e 00 00 41 89 c7 85 c0 74 89 48 c7 c7 60 61 45 c0 e8 ad b0 56 c9 8b 83 f8 02 00 00 e9 d9 fe ff ff <0f> 0b e9 34 fe ff ff 41 bf f4 ff ff ff e9 d4 fe ff ff 55 b9 11 00
[    2.061758] RSP: 0018:ffffba99c1abfc58 EFLAGS: 00010246
[    2.061759] RAX: 0000000000000000 RBX: ffff9888d0232000 RCX: ffffba99c1abfc30
[    2.061760] RDX: 0000000000000000 RSI: ffff9888c16a6cd0 RDI: ffffffff8a2515fa
[    2.061761] RBP: ffffba99c1abfc80 R08: 0000000000000000 R09: 0000000000000000
[    2.061762] R10: ffff9888c2ae2000 R11: 0000000000000007 R12: ffff9888d0232000
[    2.061763] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9888cff0e480
[    2.061764] FS:  00007fbbe275f740(0000) GS:ffff988a15dc0000(0000) knlGS:0000000000000000
[    2.061765] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.061767] CR2: 00005565929d73b8 CR3: 00000001105ec006 CR4: 00000000003706e0
[    2.061768] Call Trace:
[    2.061769]  <TASK>
[    2.061771]  spi_probe+0x55/0x90
[    2.061776]  really_probe+0x21f/0x420
[    2.061780]  __driver_probe_device+0x119/0x190
[    2.061783]  device_driver_attach+0x59/0xe0
[    2.061786]  bind_store+0xba/0x120
[    2.061788]  drv_attr_store+0x21/0x40
[    2.061791]  sysfs_kf_write+0x3b/0x50
[    2.061794]  kernfs_fop_write_iter+0x138/0x1c0
[    2.061797]  new_sync_write+0x111/0x1a0
[    2.061799]  vfs_write+0x1d5/0x270
[    2.061801]  ksys_write+0x67/0xf0
[    2.061802]  __x64_sys_write+0x19/0x20
[    2.061804]  do_syscall_64+0x59/0xc0
[    2.061807]  ? do_syscall_64+0x69/0xc0
[    2.061809]  ? syscall_exit_to_user_mode+0x27/0x50
[    2.061811]  ? do_syscall_64+0x69/0xc0
[    2.061813]  ? do_syscall_64+0x69/0xc0
[    2.061815]  entry_SYSCALL_64_after_hwframe+0x61/0xcb
[    2.061818] RIP: 0033:0x7fbbe2876a37
[    2.061820] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[    2.061821] RSP: 002b:00007ffd2b238738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[    2.061823] RAX: ffffffffffffffda RBX: 0000000000000010 RCX: 00007fbbe2876a37
[    2.061824] RDX: 0000000000000010 RSI: 0000564c26dd3a00 RDI: 0000000000000001
[    2.061825] RBP: 0000564c26dd3a00 R08: 0000564c26dd3848 R09: 0000000000000000
[    2.061825] R10: 0000564c26dd3847 R11: 0000000000000246 R12: 0000000000000001
[    2.061826] R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000
[    2.061828]  </TASK>
[    2.061828] ---[ end trace c5b27f80fb564cd7 ]---
[    2.065933] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.066115] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.136001] usb 2-3.4: new SuperSpeed USB device number 3 using xhci_hcd
[    2.142868] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.142872] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.142873] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.142874] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.142875] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.142876] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.155867] usb 2-3.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    2.155872] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    2.155874] usb 2-3.4: Product: USB 10/100/1000 LAN
[    2.155875] usb 2-3.4: Manufacturer: Realtek
[    2.155877] usb 2-3.4: SerialNumber: 000000000000
[    2.156720] cryptd: max_cpu_qlen set to 1000
[    2.185389] ACPI: battery: new extension: ASUS Battery Extension
[    2.187087] AVX2 version of gcm_enc/dec engaged.
[    2.187134] AES CTR mode by8 optimization enabled
[    2.194064] rtw_8821ce 0000:03:00.0: enabling device (0000 -> 0003)
[    2.195047] Console: switching to colour dummy device 80x25
[    2.197757] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.200544] rtw_8821ce 0000:03:00.0: Firmware version 24.8.0, H2C version 12
[    2.205025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.207209] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.207518] input: ELAN1300:00 04F3:3087 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input7
[    2.210581] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.213015] input: ELAN1300:00 04F3:3087 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input8
[    2.217120] hid-multitouch 0018:04F3:3087.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3087] on i2c-ELAN1300:00
[    2.286139] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    2.288380] audit: type=1400 audit(1690233891.470:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=601 comm="apparmor_parser"
[    2.288385] audit: type=1400 audit(1690233891.470:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=601 comm="apparmor_parser"
[    2.288388] audit: type=1400 audit(1690233891.470:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=601 comm="apparmor_parser"
[    2.288856] audit: type=1400 audit(1690233891.470:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=596 comm="apparmor_parser"
[    2.289329] audit: type=1400 audit(1690233891.470:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=598 comm="apparmor_parser"
[    2.289334] audit: type=1400 audit(1690233891.470:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=598 comm="apparmor_parser"
[    2.290912] audit: type=1400 audit(1690233891.474:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=603 comm="apparmor_parser"
[    2.292844] audit: type=1400 audit(1690233891.474:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=597 comm="apparmor_parser"
[    2.294870] audit: type=1400 audit(1690233891.478:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=602 comm="apparmor_parser"
[    2.407129] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    2.407766] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.444094] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37
[    2.444101] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.444104] usb 1-4: Product: USB2.0 Hub
[    2.447513] hub 1-4:1.0: USB hub found
[    2.447789] hub 1-4:1.0: 2 ports detected
[    2.512190] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    2.526408] rtw_8821ce 0000:03:00.0 wlo1: renamed from wlan0
[    2.561439] usbcore: registered new interface driver r8152
[    2.565062] usbcore: registered new interface driver cdc_ether
[    2.566114] usbcore: registered new interface driver r8153_ecm
[    2.574134] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[    2.609655] nvidia: loading out-of-tree module taints kernel.
[    2.609664] nvidia: module license 'NVIDIA' taints kernel.
[    2.609665] Disabling lock debugging due to kernel taint
[    2.613113] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    2.616361] intel_rapl_common: Found RAPL domain package
[    2.616367] intel_rapl_common: Found RAPL domain core
[    2.616368] intel_rapl_common: Found RAPL domain uncore
[    2.616369] intel_rapl_common: Found RAPL domain dram
[    2.616370] intel_rapl_common: Found RAPL domain psys
[    2.621145] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.621419] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    2.621516] ACPI: video: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    2.621549] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input10
[    2.621668] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.632890] nvidia-nvlink: Nvlink Core is being initialized, major device number 509

[    2.633495] nvidia 0000:02:00.0: enabling device (0006 -> 0007)
[    2.651004] fbcon: i915drmfb (fb0) is primary device
[    2.675362] Console: switching to colour frame buffer device 240x67
[    2.696702] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.749690] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  470.199.02  Thu May 11 11:46:56 UTC 2023
[    2.753848] usb 1-6: New USB device found, idVendor=13d3, idProduct=56dd, bcdDevice=18.52
[    2.753853] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.753855] usb 1-6: Product: USB2.0 HD UVC WebCam
[    2.753857] usb 1-6: Manufacturer: Azurewave
[    2.753858] usb 1-6: SerialNumber: 0x0001
[    2.768941] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  470.199.02  Thu May 11 11:46:10 UTC 2023
[    2.785206] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[    2.791369] intel_tcc_cooling: Programmable TCC Offset detected
[    2.810453] usb 2-3.4: reset SuperSpeed USB device number 3 using xhci_hcd
[    2.815897] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.815901] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.815903] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.815905] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.815906] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.815907] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    2.815909] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.818840] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210730/nsarguments-61)
[    2.862633] r8152 2-3.4:1.0: load rtl8153a-3 v2 02/07/20 successfully
[    2.890626] r8152 2-3.4:1.0 eth0: v1.12.13
[    2.909876] r8152 2-3.4:1.0 enx0c379615d72d: renamed from eth0
[    2.918174] usb 1-4.1: new high-speed USB device number 6 using xhci_hcd
[    3.023870] usb 1-4.1: New USB device found, idVendor=0781, idProduct=5504, bcdDevice= 0.10
[    3.023874] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.023875] usb 1-4.1: Product: Cruzer Tag
[    3.023876] usb 1-4.1: Manufacturer: SanDisk
[    3.023877] usb 1-4.1: SerialNumber: 00001810C7700E20
[    3.102952] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 1
[    3.142496] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[    3.154140] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[    3.158417] nvidia-uvm: Loaded the UVM driver, major device number 507.
[    3.302888] usb 1-10: New USB device found, idVendor=13d3, idProduct=3530, bcdDevice= 1.10
[    3.302894] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.302896] usb 1-10: Product: Bluetooth Radio 
[    3.302898] usb 1-10: Manufacturer: Realtek 
[    3.302900] usb 1-10: SerialNumber: 00e04c000001
[    3.372248] mc: Linux media interface: v0.10
[    3.382159] usb 1-4.2: new full-speed USB device number 8 using xhci_hcd
[    3.383125] videodev: Linux video capture interface: v2.00
[    3.386259] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0002/input/input11
[    3.396892] Bluetooth: Core ver 2.22
[    3.396913] NET: Registered PF_BLUETOOTH protocol family
[    3.396914] Bluetooth: HCI device and connection manager initialized
[    3.396916] Bluetooth: HCI socket layer initialized
[    3.396918] Bluetooth: L2CAP socket layer initialized
[    3.396921] Bluetooth: SCO socket layer initialized
[    3.399425] usb 1-6: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56dd)
[    3.402984] usb 1-6: Failed to initialize entity for entity 6
[    3.402987] usb 1-6: Failed to register entities (-22).
[    3.403069] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input12
[    3.405646] usbcore: registered new interface driver btusb
[    3.446496] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    3.446681] usbcore: registered new interface driver uvcvideo
[    3.449851] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input13
[    3.450292] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input14
[    3.493856] usb 1-4.2: New USB device found, idVendor=248a, idProduct=8566, bcdDevice= 1.00
[    3.493864] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.493867] usb 1-4.2: Product: Wireless Receiver
[    3.493869] usb 1-4.2: Manufacturer: XCTECH
[    3.500767] input: XCTECH Wireless Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:248A:8566.0004/input/input17
[    3.510242] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input15
[    3.510515] hid-generic 0003:046D:C52B.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    3.510542] input: XCTECH Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:248A:8566.0004/input/input18
[    3.516016] hid-generic 0003:046D:C52B.0005: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    3.516447] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.516449] Bluetooth: BNEP filters: protocol multicast
[    3.516452] Bluetooth: BNEP socket layer initialized
[    3.521851] NET: Registered PF_ALG protocol family
[    3.567241] ACPI BIOS Error (bug): Could not resolve symbol [\DPPP], AE_NOT_FOUND (20210730/psargs-330)

[    3.567252] No Local Variables are initialized for Method [IDSP]

[    3.567253] No Arguments are initialized for method [IDSP]

[    3.567255] ACPI Error: Aborting method \_SB.IETM.IDSP due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    3.567261] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    3.574271] input: XCTECH Wireless Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:248A:8566.0004/input/input19
[    3.574348] hid-generic 0003:248A:8566.0004: input,hidraw4: USB HID v1.11 Mouse [XCTECH Wireless Receiver] on usb-0000:00:14.0-4.2/input0
[    3.574416] usbcore: registered new interface driver usbhid
[    3.574417] usbhid: USB HID core driver
[    3.600543] snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
[    3.614156] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.653935] usb-storage 1-4.1:1.0: USB Mass Storage device detected
[    3.654057] scsi host1: usb-storage 1-4.1:1.0
[    3.654177] usbcore: registered new interface driver usb-storage
[    3.655933] usbcore: registered new interface driver uas
[    3.702584] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.702656] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.702719] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.702752] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    3.702790] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    3.760872] TCP: request_sock_TCP: Possible SYN flooding on port 40163. Sending cookies.  Check SNMP counters.
[    3.898588] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    4.041457] input: Logitech Wireless Device PID:408a Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0005/0003:046D:408A.0006/input/input26
[    4.041725] input: Logitech Wireless Device PID:408a Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0005/0003:046D:408A.0006/input/input27
[    4.041842] hid-generic 0003:046D:408A.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-0000:00:14.0-3/input2:1
[    4.249402] input: Logitech MX Keys as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0005/0003:046D:408A.0006/input/input31
[    4.249646] logitech-hidpp-device 0003:046D:408A.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:00:14.0-3/input2:1
[    4.682657] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           4.04 PQ: 0 ANSI: 2
[    4.682823] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    4.683137] sd 1:0:0:0: [sda] 4013713 512-byte logical blocks: (2.06 GB/1.91 GiB)
[    4.683294] sd 1:0:0:0: [sda] Write Protect is off
[    4.683295] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
[    4.683455] sd 1:0:0:0: [sda] No Caching mode page found
[    4.683457] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    4.685512]  sda: sda1 sda2
[    4.689007] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    4.858811] TCP: request_sock_TCP: Possible SYN flooding on port 41185. Sending cookies.  Check SNMP counters.
[    5.428132] IPv6: ADDRCONF(NETDEV_CHANGE): enx0c379615d72d: link becomes ready
[    5.428459] r8152 2-3.4:1.0 enx0c379615d72d: carrier on
[    5.694140] loop23: detected capacity change from 0 to 8
[    6.269761] kauditd_printk_skb: 49 callbacks suppressed
[    6.269764] audit: type=1400 audit(1690233895.450:60): apparmor="DENIED" operation="capable" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=1243 comm="snap-confine" capability=12  capname="net_admin"
[    6.269769] audit: type=1400 audit(1690233895.450:61): apparmor="DENIED" operation="capable" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=1243 comm="snap-confine" capability=38  capname="perfmon"
[    6.483918] audit: type=1400 audit(1690233895.666:62): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1634 comm="cups-browsed" capability=23  capname="sys_nice"
[    8.530201] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[    8.717648] rfkill: input handler disabled
[   11.615075] rtw_8821ce 0000:03:00.0: start vif d8:c0:a6:90:35:f5 on port 0
[   16.777388] logitech-hidpp-device 0003:046D:408A.0006: HID++ 4.5 device connected.
[   26.801261] Bluetooth: RFCOMM TTY layer initialized
[   26.801273] Bluetooth: RFCOMM socket layer initialized
[   26.801278] Bluetooth: RFCOMM ver 1.11
[   26.850023] rfkill: input handler enabled
[   30.544677] audit: type=1400 audit(1690233919.726:63): apparmor="DENIED" operation="capable" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=2637 comm="snap-confine" capability=12  capname="net_admin"
[   30.544687] audit: type=1400 audit(1690233919.726:64): apparmor="DENIED" operation="capable" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=2637 comm="snap-confine" capability=38  capname="perfmon"
[   32.355946] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   33.781762] ntfs3: Max link count 4000
[   33.781768] ntfs3: Enabled Linux POSIX ACLs support
[   33.781770] ntfs3: Read-only LZX/Xpress compression included
[   33.784560] ntfs3: Unknown parameter 'windows_names'
[   33.790472] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.
[   33.993245] rfkill: input handler disabled
[   38.112422] audit: type=1107 audit(1690233927.230:65): pid=877 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=3154 label="snap.snap-store.ubuntu-software" peer_pid=900 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   38.113011] audit: type=1107 audit(1690233927.230:66): pid=877 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=3154 label="snap.snap-store.ubuntu-software" peer_pid=900 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   38.117420] audit: type=1107 audit(1690233927.234:67): pid=877 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=3154 label="snap.snap-store.ubuntu-software" peer_pid=900 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   38.117951] audit: type=1107 audit(1690233927.234:68): pid=877 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=3154 label="snap.snap-store.ubuntu-software" peer_pid=900 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   38.780154] audit: type=1400 audit(1690233927.890:69): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/appstream.conf" pid=3154 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   48.701072] audit: type=1400 audit(1690233937.749:70): apparmor="DENIED" operation="open" profile="snap-update-ns.firefox" name="/var/lib/" pid=4608 comm="5" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   50.006411] audit: type=1400 audit(1690233939.050:71): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:255" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.008187] audit: type=1400 audit(1690233939.054:72): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:0" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.008396] audit: type=1400 audit(1690233939.054:73): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:0" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.008805] audit: type=1400 audit(1690233939.054:74): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:0" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.013441] audit: type=1400 audit(1690233939.058:75): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:255" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.013662] audit: type=1400 audit(1690233939.058:76): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:254" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.013769] audit: type=1400 audit(1690233939.058:77): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:0" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.013959] audit: type=1400 audit(1690233939.058:78): apparmor="DENIED" operation="symlink" profile="snap.firefox.firefox" name="/dev/char/195:0" pid=4687 comm="glxtest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[   50.267171] audit: type=1326 audit(1690233939.309:79): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.firefox.firefox pid=4550 comm="firefox" exe="/snap/firefox/2908/usr/lib/firefox/firefox" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f2e9381173d code=0x50000
[   59.273555] kauditd_printk_skb: 8 callbacks suppressed
[   59.273559] audit: type=1326 audit(1690233948.305:88): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=3154 comm="pool-org.gnome." exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f7a5d2d8c4b code=0x50000
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ 

Hors ligne

#12 Le 25/07/2023, à 08:33

xubu1957

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,

lsmod | grep rtw

donne un résultat ?

Montre aussi :

lsmod | grep 8821

Dernière modification par xubu1957 (Le 25/07/2023, à 10:23)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#13 Le 25/07/2023, à 10:01

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,
Si tu souhaites avoir le clavier/souris fonctionnel sur windows et ubuntu, il faut faire gaffe que la clé soit la même sur windows et ubuntu. Je vais faire des recherches pour trouver les commandes à passer sur les deux OS.
Pour la veille, il faut faire attention que le module gérant le bluetooth ne passe pas en veille.
Pour grub, je ne sais pas s'il est possible d'avoir du bluetooth aussi tôt au démarrage.
Si le bluetooth et le wifi fonctionnent correctement hormis les problèmes que tu cites, on va probablement pas toucher aux pilotes.
Je vais me renseigner.

Edit: pour la question de pas avoir à appairer en cas de changement d'OS: https://unix.stackexchange.com/a/255510 (j'ai une préférence pour la solution 2 qui utilise chntpw, mais perso je monterais plutôt la partition windows en lecture seule afin d'éviter tout risque de casser quelque chose)
Pour grub, j'ai pas l'impression qu'on puisse, faut que je creuse un peu plus, mais c'est mal barré.
Dans Paramètres -> Énergie, pense à décocher "leu bluetooth peut être éteint pour économiser de l'énergie"

Dernière modification par Nuliel (Le 25/07/2023, à 10:21)

Hors ligne

#14 Le 25/07/2023, à 21:09

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à #12 ( xubu1957 ):
---------------------------------------

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ lsmod | grep rtw
rtw88_8821ce           16384  0
rtw88_8821c            94208  1 rtw88_8821ce
rtw88_pci              32768  1 rtw88_8821ce
rtw88_core            258048  2 rtw88_pci,rtw88_8821c
mac80211             1249280  2 rtw88_pci,rtw88_core
cfg80211              974848  2 rtw88_core,mac80211
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ lsmod | grep 8821
rtw88_8821ce           16384  0
rtw88_8821c            94208  1 rtw88_8821ce
rtw88_pci              32768  1 rtw88_8821ce
rtw88_core            258048  2 rtw88_pci,rtw88_8821c
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$

Hors ligne

#15 Le 25/07/2023, à 21:29

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à #13 (Nuliel ):
---------------------------------

1) Avec Ubuntu 22.04, dans Paramètres / Énergie, il n'y a pas de réglage du type "le bluetooth peut être éteint pour économiser de l'énergie"
2) Concernant le lien  https://unix.stackexchange.com/a/255510, est-ce que tu confirmes qu'il faut appliquer toutes les commandes qui se trouvent au début de cette page web entre "How to fix" et "6. Reboot into Windows - it works!"
Est-ce que tu pourrais préciser comment effectuer la manip que tu proposes ("perso je monterais plutôt la partition windows en lecture seule") et à quel moment dans la liste des commandes décritent sur le lien que tu m'as communiqué
3) Dans le futur, en cas de réinstallation, est-ce que tu confirmes qu'il vaudrait mieux que j'installe Windows 11 et Ubuntu sur 2 disques séparés et choisir dans le BIOS sur quel disque booter en priorité pour éviter ces problèmes de clés Bluetooth qui doivent être identiques en cas de dual boot ? (mon portable accepte 2 disques durs internes. Un seul SDD équipe à ce jour mon PC.

Hors ligne

#16 Le 26/07/2023, à 11:39

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

1) Avec Ubuntu 22.04, dans Paramètres / Énergie, il n'y a pas de réglage du type "le bluetooth peut être éteint pour économiser de l'énergie"

Je l'ai sur ubuntu 20.04 (c'est des boutons pour justement choisir quoi faire pour l'économie d'énergie du wifi/4G/bluetooth), c'est surprenant que tu ne l'aies pas.

2) Concernant le lien  https://unix.stackexchange.com/a/255510, est-ce que tu confirmes qu'il faut appliquer toutes les commandes qui se trouvent au début de cette page web entre "How to fix" et "6. Reboot into Windows - it works!"
Est-ce que tu pourrais préciser comment effectuer la manip que tu proposes ("perso je monterais plutôt la partition windows en lecture seule") et à quel moment dans la liste des commandes décritent sur le lien que tu m'as communiqué

Dans le lien que je t'ai communiqué, tu as deux choix sur la partie 3, je te conseille celle avec "Use chntpw from your Linux distro (easier)" parce que c'est plus simple. Il est indiqué dans cette partie "Mount your Windows system drive in read-write mode", mais je comprends qu'on récupère la clé sans faire de modification côté windows, c'est pour cela que je ne vois pas l'intérêt de la lecture/écriture de windows. Après ça dérange pas non plus.
La partie "Before Mint 18/16.04 you could do this:" n'est pas à faire puisque tu tombes dans l'autre cas (tu as une distribution plus récente)

Veux tu que je redétaille toute la procédure en français?

3) Dans le futur, en cas de réinstallation, est-ce que tu confirmes qu'il vaudrait mieux que j'installe Windows 11 et Ubuntu sur 2 disques séparés et choisir dans le BIOS sur quel disque booter en priorité pour éviter ces problèmes de clés Bluetooth qui doivent être identiques en cas de dual boot ? (mon portable accepte 2 disques durs internes. Un seul SDD équipe à ce jour mon PC.

Cela ne changera strictement rien du point de vue bluetooth. Chaque OS négocie une clé d'appairage, qu'il soit sur deux disques séparés ou sur un seul disque, le résultat sera le même. Si tu veux éviter le réappairage, il faut forcément transférer une clé d'appairage d'un OS sur l'autre.

Dernière modification par Nuliel (Le 26/07/2023, à 11:40)

Hors ligne

#17 Le 26/07/2023, à 23:25

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Réponse à #16 (Nuliel ):
---------------------------------

pour répondre à tes 3 points:
1) J'ai un 2ème PC avec un seul OS ( Ubuntu 22.04 ) : là également,il n'y a pas  "le bluetooth peut être éteint pour économiser de l'énergie" dans le menu énergie
=> je suppose que ce réglage existait dans Ubuntu 20.04 puis a été supprimé en 22.04 (certains menus ont légèrement changés en effectuant l'upgrade 20.04 => 22.04)

2) OK pour faire la manip avec le 2ème choix dans la partie 3.
J'ai analysé ce tuto et effectué quelques vérifications dans mon répertoire "/var/lib/bluetooth/":
  * au préalable, j'ai récupéré l'adresse MAC de mon driver Bluetooth avec la commande hciconfig
  => en ouvrant le répertoire qui correspond à l'adresse MAC de mon driver Bluetooth , il y a 2 sous-répertoires avec 2 autres adresses MAC, celle de ma souris et celle de mon clavier Bluetooth.
  * j'ai ouvert le fichier "info" de ma souris et de mon clavier. Je n'ai pas trouvé [LinkKey] mentionné dans le tuto au point 4 (dans le cas Ubuntu 16.04).
  Par contre, il y a plusieurs clés:
    ° pour la souris  : [IdentityResolvingKey] , [LongTermKey] , [PeripheralLongTermKey] , [SlaveLongTermKey]
    ° pour le clavier : [IdentityResolvingKey] , [LongTermKey]
   => quelle clé Ubuntu modifier pour ces 2 périphériques (en copiant les clés récupérées préalablement dans Windows) ?
   * est-ce que tu pourrais expliquer le point 5 "Run these commands in that console:" relatif à chntpw ?
   (maintenant que je connais les adresses MAC de ma souris et de mon clavier, il faudra que je répète ce point 5 pour récupérer la clé de mes 2 périphériques sous Windows

3) OK

Hors ligne

#18 Le 27/07/2023, à 10:28

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Très bonne question, je m'attendais juste à une clé LinkKey. Je pense que tes périphériques sont en BLE.

Le lien en parle:

Bluetooth LE Devices: These may pair differently. I haven't investigated myself, but this may help Dual Boot Bluetooth LE (low energy) device pairing

et redirige vers https://unix.stackexchange.com/question … ce-pairing qui parle de récupérer IdentityResolvingKey (IRK), LocalSignatureKey (CSRK), LongTermKey (LTK) et les mettre sur linux.

Dernière modification par Nuliel (Le 27/07/2023, à 10:28)

Hors ligne

#19 Le 27/07/2023, à 22:36

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

* Je suis bloqué à l'étape 3 du tuto (je n'arrive pas à accéder au disque C: de Windows 11):

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:~$ cd /c:/Windows/System32/config
bash: cd: /c:/Windows/System32/config: Aucun fichier ou dossier de ce type

* remarque: à l'étape 2, j'ai monté la partition Windows à l'aide de Nautilus / Autres emplacements / j'ai cliqué sur OS qui a ouvert l'arborescence des fichiers de Windows ( cela correspond à ma partition /dev/nvme0n1p3 ). Je vois la liste des répertoires qui sont sous C: mais je ne trouve pas la désignation C: en tant que telle.

=> comment faire à l'étape 2 ou 3 afin de pouvoir changer de répertoire selon "cd /[WindowsSystemDrive]/.../config" ?

Hors ligne

#20 Le 28/07/2023, à 12:09

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Avec Nautilus, tu as effectivement monté la partition Windows dans un dossier de /media, car tous les montages sont faits dans des dossiers de /media (je compte pas /mnt pour simplifier).
Il faut donc chercher dans le dossier /media.
cd /[WindowsSystemDrive]/.../config" sera adapté en cd /media/dossierWindows/.../config"
avec DossierWindows à trouver (il y a quelques choix, mais tu ne devrais pas avoir de mal à savoir lequel est la partition Windows)

A noter que tu n'auras pas la dénomination C: sous linux, mais les noms des dossiers de la partition Windows font que cette partition est facilement reconnaissable.

Dernière modification par Nuliel (Le 28/07/2023, à 12:11)

Hors ligne

#21 Le 28/07/2023, à 18:58

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Je progresse à petit pas : étape 3 OK ( je suis dans le sous-répertoire config de Windows )
Par contre à l'étape 5 la commande "cd" est refusée ( j'ai testé 4 combinaisons possibles selon le tuto):

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:/media/gilles/OS/Windows/System32/config$ chntpw -e SYSTEM
chntpw version 1.00 140201, (c) Petter N Hagen
Hive <SYSTEM> name (from header): <SYSTEM>
ROOT KEY at offset: 0x001020 * Subkey indexing type is: 686c <lh>
File size 30670848 [1d40000] bytes, containing 6429 pages (+ 1 headerpage)
Used for data: 421570/29517416 blocks/bytes, unused: 1291/853496 blocks/bytes.

Simple registry editor. ? for help.

> cd CurrentControlSet\Services\BTHPORT\parameters\Keys
Key CurrentControlSet\Services\BTHPORT\parameters\Keys not found!

> cd CurrentControlSet\services\BTHPORT\parameters\Keys
Key CurrentControlSet\services\BTHPORT\parameters\Keys not found!

> cd ControlSet001\Services\BTHPORT\parameters\Keys
Key ControlSet001\Services\BTHPORT\parameters\Keys not found!

> cd ControlSet001\services\BTHPORT\parameters\Keys
Key ControlSet001\services\BTHPORT\parameters\Keys not found!

> 

Le paquet chntpw est correctement installé:

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:/media/gilles/OS/Windows/System32/config$ dpkg -l chntpw
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom            Version      Architecture Description
+++-==============-============-============-=================================
ii  chntpw         140201-1     amd64        NT SAM password recovery utility

Pour information, ci-joint le contenu du sous-répertoire "config" suite à l'étape 3:

gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:/media/gilles/OS/Windows/System32/config$ cd /media/gilles/OS/Windows/System32/config
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:/media/gilles/OS/Windows/System32/config$ ls
BBI
BBI{a2332f30-cdbf-11ec-8680-002248483d79}.TM.blf
BBI{a2332f30-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
BBI{a2332f30-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
BBI.LOG1
BBI.LOG2
bbimigrate
BCD-Template
BCD-Template.LOG
BCD-Template.LOG1
BCD-Template.LOG2
BFS
COMPONENTS
COMPONENTS{a2332ef4-cdbf-11ec-8680-002248483d79}.TM.blf
COMPONENTS{a2332ef4-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
COMPONENTS{a2332ef4-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
COMPONENTS.LOG1
COMPONENTS.LOG2
DEFAULT
DEFAULT{a2332f0c-cdbf-11ec-8680-002248483d79}.TM.blf
DEFAULT{a2332f0c-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
DEFAULT{a2332f0c-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
DEFAULT.LOG1
DEFAULT.LOG2
DRIVERS
DRIVERS{a2332f00-cdbf-11ec-8680-002248483d79}.TM.blf
DRIVERS{a2332f00-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
DRIVERS{a2332f00-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
DRIVERS.LOG1
DRIVERS.LOG2
ELAM
ELAM{a2332f3c-cdbf-11ec-8680-002248483d79}.TM.blf
ELAM{a2332f3c-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
ELAM{a2332f3c-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
ELAM.LOG1
ELAM.LOG2
Journal
RegBack
SAM
SAM{a2332ee8-cdbf-11ec-8680-002248483d79}.TM.blf
SAM{a2332ee8-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
SAM{a2332ee8-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
SAM.LOG1
SAM.LOG2
SECURITY
SECURITY{a2332edc-cdbf-11ec-8680-002248483d79}.TM.blf
SECURITY{a2332edc-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
SECURITY{a2332edc-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
SECURITY.LOG1
SECURITY.LOG2
SOFTWARE
SOFTWARE{a2332ec4-cdbf-11ec-8680-002248483d79}.TM.blf
SOFTWARE{a2332ec4-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
SOFTWARE{a2332ec4-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
SOFTWARE.LOG1
SOFTWARE.LOG2
SYSTEM
SYSTEM{a2332ed0-cdbf-11ec-8680-002248483d79}.TM.blf
SYSTEM{a2332ed0-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000001.regtrans-ms
SYSTEM{a2332ed0-cdbf-11ec-8680-002248483d79}.TMContainer00000000000000000002.regtrans-ms
SYSTEM.LOG1
SYSTEM.LOG2
systemprofile
TxR
userdiff
userdiff{0c38212d-2347-11ee-a054-0c379615d72d}.TM.blf
userdiff{0c38212d-2347-11ee-a054-0c379615d72d}.TMContainer00000000000000000001.regtrans-ms
userdiff{0c38212d-2347-11ee-a054-0c379615d72d}.TMContainer00000000000000000002.regtrans-ms
userdiff.LOG1
userdiff.LOG2
gilles@gilles-VivoBook-ASUSLaptop-X712FBC-P1701FB:/media/gilles/OS/Windows/System32/config$ 

Hors ligne

#22 Le 29/07/2023, à 23:26

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Le clavier et souris étaient bien appairés sur windows avant de revenir sur ubuntu?
Tu peux tenter avec ControlSet002 plutôt que ControlSet001 dans le doute (c'est indiqué sur https://unix.stackexchange.com/question … ce-pairing )

Dernière modification par Nuliel (Le 29/07/2023, à 23:27)

Hors ligne

#23 Le 31/07/2023, à 22:44

GPA92

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Plusieurs informations suite à de multiples tests ou vérifications:

1) Je confirme que mon clavier et ma souris sont des modèles basse consommation ( confirmé dans les 2 fichiers "info" et dans la doc utilisateur. Cette fonctionnalité semble liée au Bluetooth 5.0 )

2) J'avais fait une saisie erronée à l'étape 3 dans "chntpw" (j'avais saisie des lettres en minuscule au lieu de majuscule):
la saisie correcte sur mon PC est :

> cd ControlSet001\Services\BTHPORT\Parameters\Keys

(...)\Services\BTHPORT\Parameters\Keys> 

Astuce: taper plusieurs fois cd xxx puis ls pour voir la liste successive des sous-répertoires depuis ControlSet001 jusqu'à Keys

3) J'ai repeté 2 fois la procédure jusqu'au bout => appairage sous Ubuntu NOK (après avoir relancé le service Bluetooth à l'étape 5, l'icône Bluetooth s'affiche dans le tableau de bord Ubuntu mais elle est instable avec:
  * la connexion de la souris qui oscille entre connecté et déconnecté (mais la souris ne bouge pas)
  * le clavier reste lui déconnecté
J'ai confirmé que les clés sont correctes dans les 2 fichiers "info" sous Ubuntu (par rapport aux clés affichées sous Windows 11 à l'aide de "chntpw".

Il y a 2 choses de bizarre :
Point 1:
* 2 clés uniquement sous Windows 11 aussi bien pour la souris et le clavier
* au lieu de 2 ou 4 clés sous Ubuntu ( voir #17 )
=> j'ai copié les clés IRK= [IdentityResolvingKey] et LTK = [LongTermKey] sur Ubuntu pour le clavier et la souris (en respectant le format sans espace sous Ubuntu pour les 16 codes HEXA)

Point 2:
l'adresse MAC du clavier est légèrement différente entre Windows 11 et Ubuntu :
* Windows 11:

<eb2402f25cfd>

* Ubuntu:

EB:24:02:F2:5C:FC

(l'adresse MAC de la souris est identique  entre Windows 11 et Ubuntu)

4) L'apprentissage sous Windows 11 fonctionne correctement à l'exception de 2 limitations
* choix Windows 11 avec le clavier intégré lors du GRUB (clavier Bluetooth NOK à ce stade)
* sortie de veille par appui fugitif sur le bouton power (alors qu'en mode USB, le réveil par le clavier fonctionne)
hormis cela, lorsque je reviens d'Ubuntu à Windows 11 ou que je redémarre Windows 11, la connexion Bluetooth du clavier et de la souris fonctionne toujours

5) A ce stade sous Ubuntu, le Bluetooth fonctionne uniquement si je fais l'apprentissage sous Ubuntu. Mais dès que je passe en veille ou que je redémarre sous Ubuntu, la connexion est perdue.

Hors ligne

#24 Le 05/08/2023, à 21:39

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Bonjour,
Désolé pour le temps de réponse, j'ai eu une semaine un peu chargée hmm

1) J'ai fait quelques recherches, le BLE existe depuis le bluetooth 4.0, et le mode classique s'appelle BR/EDR.
2) ok
3)

l'adresse MAC du clavier est légèrement différente entre Windows 11 et Ubuntu

Je vois pas comment cela est possible: https://macaddresschanger.com/what-is-b … ss-BD_ADDR
Je sais qu'il existe des appareils qui rendent aléatoires les MAC, mais là c'est bizarre. A ma connaissance ce changement en fin de MAC ne va pas changer les clés et ne devrait pas perturber (si c'était en début ou milieu de MAC, ça perturberait)

* choix Windows 11 avec le clavier intégré lors du GRUB (clavier Bluetooth NOK à ce stade)

Pour ça je pense qu'on y arrivera pas.

Je pense que le problème est lié à l'histoire des 4 clés. Je ne maîtrise pas ce système, il faut que je me renseigne.

Edit: je viens de tomber sur https://konfekt.github.io/blog/2023/05/ … gy-devices qui pointe aussi sur un gist sur lequel j'étais tombé, je pense qu'on peut l'essayer. Je prépare une petite explication

Dernière modification par Nuliel (Le 05/08/2023, à 21:49)

Hors ligne

#25 Le 05/08/2023, à 22:07

Nuliel

Re : [NON résolu] Bluetooth : Perte de connexion clavier et souris

Allez nouveau message pour tester le script python:

Installer chntpw (c'est déjà fait dans ton cas)
Démonter la partition windows par le gestionnaire de fichiers si elle est déjà montée, regarder dans

lsblk -f

pour trouver le nom de la partition windows (/dev/sdb1 par exemple), faire

sudo mount /dev/sdb1 /mnt

puis

cd
mkdir test_bt
cd test_bt
wget https://gist.githubusercontent.com/Mygod/f390aabf53cf1406fc71166a47236ebf/raw/8514b2bd949c1f56a8d922ac284345b489dee871/export-ble-infos.py
chmod a+x ./export-ble-infos.py
./export-ble-infos.py
sudo bash -c 'cp -r ./bluetooth /var/lib && systemctl restart bluetooth'
rm -r bluetooth

puis on démonte la partition windows:

sudo umount /mnt

Si tu as des erreurs ou des doutes, n'hésite pas

Dernière modification par Nuliel (Le 05/08/2023, à 22:09)

Hors ligne