Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 08/12/2020, à 11:58

ferlop

écran noir après le login Ubuntu 20.04

Bonjour, j'ai un souci nouveau, juste après la page d'accueil, je rentre le login et après écran noir (LCD activé pas en veille), je reboot en ALT+Imp+b je suis en dual boot avec windows 10, avant ça allait bien, et là c'est nouveau, j'écris depuis windows, je peux accéder à la console mais je dois rebooter pour essayer d'éventuelles manip dans la console de dépannage. Merci d'avance pour vos conseils !!

Hors ligne

#2 Le 08/12/2020, à 13:19

ferlop

Re : écran noir après le login Ubuntu 20.04

J’ai essayé de redémarrer en recovery mode mais lignes impressionnant qui défilent du coup je réinstalle pour la x fois. J’espere que ça sera la bonne !! Est-ce que Windows 10 peut embêter l’install d’ubuntu 20.04 ? Merci d’avance  !!

Hors ligne

#3 Le 08/12/2020, à 19:51

lucmars

Re : écran noir après le login Ubuntu 20.04

Ta 2004 c'est une installe friche ou une mise à niveau, car tu dis que ça allait bien avant, mais avec quoi en dual-boot ?

Par ailleurs donnes-nous le modèle exact de ton pc et toute info dont tu disposes.

Enfin depuis une clef/dvd buntu fais-nous un boot-info (voir la doc)


Gaulois Matter !

Hors ligne

#4 Le 08/12/2020, à 21:25

ferlop

Re : écran noir après le login Ubuntu 20.04

En fait j'ai un dual boot récent avec d'un côté windows 10 pro et Ubuntu avec directement la version 20.04.1 (Ubuntu sur une partition de 84Go) et windows sur 1 To. C'est récemment que j'ai installé Ubuntu (1 mois environ) j'ai rencontré d'une part des problèmes de connexions Internet (Filaire et wifi) mais j'ai réussi les mises à jour avec un partage de connexion sur mobile. Peut être que le problème vient de la box modem qui reste à changer pour vérifier (pas de problèmes côté windows pour la connexion).
La config c'est : CM Asus H110, I7 6ème génération, 32 Go de RAM, 1 TO de SSD, MSI NVIDIA RTX2070 Super avec sortie sur écran 4K DP, carte son Focusrite USB, voilà en gros
je reboot sur la clé USB pour un live Ubuntu pour le dual boot : (Merci !) Ah problème avec la clé, je la change de port USB et je recommence (error PCIE en lignes continues)

Dernière modification par ferlop (Le 08/12/2020, à 21:41)

Hors ligne

#5 Le 08/12/2020, à 22:46

ferlop

Re : écran noir après le login Ubuntu 20.04

En tapant l'erreur sur le forum j'ai vu que quelqu'un a essayé de taper "e" avant le démarrage et d'installer pci=noaer entre quiet et splash et ouf!! Ubuntu s'est ouvert (sur l'install SSd dual boot), dois-je le faire à chaque fois ? comment résoudre ce problème ? Par ailleurs je n'ai Internet qu'avec le mobile en partage wifi, pas moyen à travers la box, problèmes de pilotes ? Merci encore

Hors ligne

#6 Le 08/12/2020, à 22:53

ferlop

Re : écran noir après le login Ubuntu 20.04

sudo lshw
[sudo] Mot de passe de ferlop : 
ferlop-g11cd                
    description: Ordinateur de Bureau
    produit: G11CD (SKU)
    fabricant: ASUSTeK COMPUTER INC.
    version: System Version
    numéro de série: G5PDCG000017
    bits: 64 bits
    fonctionnalités: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
    configuration : boot=normal chassis=desktop family=Gaming sku=SKU uuid=BE0D9908-6735-4481-726F-3497F67DABBB
  *-core
       description: Carte mère
       produit: G11CD
       fabricant: ASUSTeK COMPUTER INC.
       identifiant matériel: 0
       version: Rev 1.xx
       numéro de série: 160368689101448
       emplacement: To Be Filled By O.E.M.
     *-firmware
          description: BIOS
          fabricant: American Megatrends Inc.
          identifiant matériel: 0
          version: 1002
          date: 03/19/2018
          taille: 64KiB
          capacité: 16MiB
          fonctionnalités: pci apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cache:0
          description: L1 cache
          identifiant matériel: 32
          emplacement: L1 Cache
          taille: 128KiB
          capacité: 128KiB
          fonctionnalités: synchronous internal write-back data
          configuration : level=1
     *-cache:1
          description: L1 cache
          identifiant matériel: 33
          emplacement: L1 Cache
          taille: 128KiB
          capacité: 128KiB
          fonctionnalités: synchronous internal write-back instruction
          configuration : level=1
     *-cache:2
          description: L2 cache
          identifiant matériel: 34
          emplacement: L2 Cache
          taille: 1MiB
          capacité: 1MiB
          fonctionnalités: synchronous internal write-back unified
          configuration : level=2
     *-cache:3
          description: L3 cache
          identifiant matériel: 35
          emplacement: L3 Cache
          taille: 8MiB
          capacité: 8MiB
          fonctionnalités: synchronous internal write-back unified
          configuration : level=3
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
          fabricant: Intel Corp.
          identifiant matériel: 36
          information bus: cpu@0
          version: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: LGA1151
          taille: 3681MHz
          capacité: 4GHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
          configuration : cores=4 enabledcores=4 threads=8
     *-memory
          description: Mémoire Système
          identifiant matériel: 37
          emplacement: Carte mère
          taille: 32GiB
        *-bank:0
             description: DIMM DDR4 Synchrone 2133 MHz (0,5 ns)
             produit: F4-3200C16-16GVK
             fabricant: Fujitsu
             identifiant matériel: 0
             numéro de série: 00000000
             emplacement: DIMM_A1
             taille: 16GiB
             bits: 64 bits
             horloge: 2133MHz (0.5ns)
        *-bank:1
             description: DIMM DDR4 Synchrone 2133 MHz (0,5 ns)
             produit: F4-3200C16-16GVK
             fabricant: Fujitsu
             identifiant matériel: 1
             numéro de série: 00000000
             emplacement: DIMM_B1
             taille: 16GiB
             bits: 64 bits
             horloge: 2133MHz (0.5ns)
     *-pci
          description: Host bridge
          produit: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
          fabricant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 07
          bits: 32 bits
          horloge: 33MHz
          configuration : driver=skl_uncore
          ressources : irq:0
        *-pci:0
             description: PCI bridge
             produit: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16)
             fabricant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 07
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:121 portE/S:e000(taille=4096) mémoire:de000000-df0fffff portE/S:c0000000(taille=303038464)
           *-display
                description: VGA compatible controller
                produit: TU104 [GeForce RTX 2070 SUPER]
                fabricant: NVIDIA Corporation
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: a1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
                configuration : driver=nouveau latency=0
                ressources : irq:140 mémoire:de000000-deffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:c0000-dffff
           *-multimedia
                description: Audio device
                produit: TU104 HD Audio Controller
                fabricant: NVIDIA Corporation
                identifiant matériel: 0.1
                information bus: pci@0000:01:00.1
                version: a1
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list
                configuration : driver=snd_hda_intel latency=0
                ressources : irq:17 mémoire:df080000-df083fff
           *-usb
                description: USB controller
                produit: TU104 USB 3.1 Host Controller
                fabricant: NVIDIA Corporation
                identifiant matériel: 0.2
                information bus: pci@0000:01:00.2
                version: a1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: msi pciexpress pm xhci cap_list
                configuration : driver=xhci_hcd latency=0
                ressources : irq:127 mémoire:d2000000-d203ffff mémoire:d2040000-d204ffff
              *-usbhost:0
                   produit: xHCI Host Controller
                   fabricant: Linux 5.4.0-56-generic xhci-hcd
                   identifiant matériel: 0
                   information bus: usb@3
                   nom logique: usb3
                   version: 5.04
                   fonctionnalités: usb-2.00
                   configuration : driver=hub slots=2 speed=480Mbit/s
              *-usbhost:1
                   produit: xHCI Host Controller
                   fabricant: Linux 5.4.0-56-generic xhci-hcd
                   identifiant matériel: 1
                   information bus: usb@4
                   nom logique: usb4
                   version: 5.04
                   fonctionnalités: usb-3.10
                   configuration : driver=hub slots=4 speed=10000Mbit/s
           *-serial
                description: Serial bus controller
                produit: TU104 USB Type-C UCSI Controller
                fabricant: NVIDIA Corporation
                identifiant matériel: 0.3
                information bus: pci@0000:01:00.3
                version: a1
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: msi pciexpress pm bus_master cap_list
                configuration : driver=nvidia-gpu latency=0
                ressources : irq:136 mémoire:df084000-df084fff
        *-usb
             description: USB controller
             produit: 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
             fabricant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration : driver=xhci_hcd latency=0
             ressources : irq:126 mémoire:df410000-df41ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabricant: Linux 5.4.0-56-generic xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 5.04
                fonctionnalités: usb-2.00
                configuration : driver=hub slots=10 speed=480Mbit/s
              *-usb:0
                   description: Périphérique d'interface homme/machine
                   produit: ShuttlePro
                   fabricant: Contour Design
                   identifiant matériel: 6
                   information bus: usb@1:6
                   version: 2.01
                   fonctionnalités: usb-2.00
                   configuration : driver=usbhid maxpower=100mA speed=1Mbit/s
              *-usb:1
                   description: Interface sans fil Bluetooth
                   produit: Bluetooth Radio
                   fabricant: Realtek
                   identifiant matériel: 7
                   information bus: usb@1:7
                   version: 2.00
                   numéro de série: 00e04c000001
                   fonctionnalités: bluetooth usb-2.10
                   configuration : driver=btusb maxpower=500mA speed=12Mbit/s
              *-usb:2
                   description: Concentrateur USB
                   produit: DUB-H7 7-port USB 2.0 hub
                   fabricant: D-Link Corp.
                   identifiant matériel: a
                   information bus: usb@1:a
                   version: 1.00
                   fonctionnalités: usb-2.00
                   configuration : driver=hub slots=7 speed=480Mbit/s
                 *-usb:0
                      description: Clavier
                      produit: USB Keyboard
                      fabricant: SONiX
                      identifiant matériel: 3
                      information bus: usb@1:a.3
                      version: 1.05
                      fonctionnalités: usb-2.00
                      configuration : driver=usbhid maxpower=100mA speed=1Mbit/s
                 *-usb:1
                      description: Périphérique audio
                      produit: Scarlett 2i2 USB
                      fabricant: Focusrite
                      identifiant matériel: 4
                      information bus: usb@1:a.4
                      version: 6.45
                      numéro de série: Y8C82UT981DD04
                      fonctionnalités: usb-2.00 audio-control
                      configuration : driver=snd-usb-audio maxpower=500mA speed=480Mbit/s
                 *-usb:2
                      description: Clavier
                      produit: USB Receiver
                      fabricant: Logitech
                      identifiant matériel: 5
                      information bus: usb@1:a.5
                      version: 12.11
                      fonctionnalités: usb-2.00
                      configuration : driver=usbhid maxpower=98mA speed=12Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabricant: Linux 5.4.0-56-generic xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 5.04
                fonctionnalités: usb-3.00
                configuration : driver=hub slots=4 speed=5000Mbit/s
              *-usb
                   description: Périphérique de stockage de masse
                   produit: Ultra USB 3.0
                   fabricant: SanDisk
                   identifiant matériel: 2
                   information bus: usb@2:2
                   nom logique: scsi0
                   version: 1.00
                   numéro de série: 0501185990ee3260e27b59782f169fe77dbc45373219243fc86da790721bfc88235e000000000000
                   fonctionnalités: usb-3.20 scsi emulated scsi-host
                   configuration : driver=usb-storage maxpower=896mA speed=5000Mbit/s
                 *-disk
                      description: SCSI Disk
                      produit: Ultra USB 3.0
                      fabricant: SanDisk
                      identifiant matériel: 0.0.0
                      information bus: scsi@0:0.0.0
                      nom logique: /dev/sdd
                      version: 1.00
                      numéro de série: 0501185990ee3260e27b
                      taille: 57GiB (61GB)
                      fonctionnalités: removable
                      configuration : ansiversion=6 logicalsectorsize=512 sectorsize=512
                    *-medium
                         identifiant matériel: 0
                         nom logique: /dev/sdd
                         taille: 57GiB (61GB)
                         fonctionnalités: partitioned partitioned:dos
                         configuration : signature=000c9197
                       *-volume
                            description: Windows FAT volume
                            fabricant: SYSLINUX
                            identifiant matériel: 1
                            nom logique: /dev/sdd1
                            nom logique: /media/ferlop/UBUNTU 20_0
                            version: FAT32
                            numéro de série: 15ef-3a0f
                            taille: 57GiB
                            capacité: 57GiB
                            fonctionnalités: primary bootable fat initialized
                            configuration : FATs=2 filesystem=fat label=UBUNTU 20_0 mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted
        *-communication
             description: Communication controller
             produit: 100 Series/C230 Series Chipset Family MEI Controller #1
             fabricant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=mei_me latency=0
             ressources : irq:139 mémoire:df42d000-df42dfff
        *-sata
             description: SATA controller
             produit: Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
             fabricant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             nom logique: scsi2
             nom logique: scsi3
             nom logique: scsi4
             version: 31
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: sata msi pm ahci_1.0 bus_master cap_list emulated
             configuration : driver=ahci latency=0
             ressources : irq:137 mémoire:df428000-df429fff mémoire:df42c000-df42c0ff portE/S:f050(taille=8) portE/S:f040(taille=4) portE/S:f020(taille=32) mémoire:df42b000-df42b7ff
           *-disk:0
                description: ATA Disk
                produit: TOSHIBA DT01ACA1
                fabricant: Toshiba
                identifiant matériel: 0
                information bus: scsi@2:0.0.0
                nom logique: /dev/sda
                version: A7L0
                numéro de série: 46A3X9GNS
                taille: 931GiB (1TB)
                fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                configuration : ansiversion=5 guid=9c503d55-85ee-4997-833b-ea9fcf9d0978 logicalsectorsize=512 sectorsize=4096
              *-volume:0
                   description: reserved partition
                   fabricant: Windows
                   identifiant matériel: 1
                   information bus: scsi@2:0.0.0,1
                   nom logique: /dev/sda1
                   numéro de série: 4973300b-2041-4ba1-9e5c-9c818c180f26
                   capacité: 127MiB
                   fonctionnalités: nofs
                   configuration : name=Microsoft reserved partition
              *-volume:1
                   description: Windows NTFS volume
                   fabricant: Windows
                   identifiant matériel: 2
                   information bus: scsi@2:0.0.0,2
                   nom logique: /dev/sda2
                   version: 3.1
                   numéro de série: 6aa174db-29ee-2743-8ba7-92d324549790
                   taille: 931GiB
                   capacité: 931GiB
                   fonctionnalités: ntfs initialized
                   configuration : clustersize=4096 created=2014-01-15 04:00:54 filesystem=ntfs label=New Volume name=Basic data partition state=clean
           *-disk:1
                description: ATA Disk
                produit: Samsung SSD 860
                identifiant matériel: 1
                information bus: scsi@3:0.0.0
                nom logique: /dev/sdb
                version: 4B6Q
                numéro de série: S4X6NF0MC08404K
                taille: 931GiB (1TB)
                fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                configuration : ansiversion=5 guid=2095d2c1-dcdb-4c46-8e97-0c3343304fc1 logicalsectorsize=512 sectorsize=512
              *-volume:0
                   description: reserved partition
                   fabricant: Windows
                   identifiant matériel: 1
                   information bus: scsi@3:0.0.0,1
                   nom logique: /dev/sdb1
                   numéro de série: 37cc98a9-7115-4843-a485-920986b18190
                   capacité: 127MiB
                   fonctionnalités: nofs
              *-volume:1
                   description: Windows NTFS volume
                   fabricant: Windows
                   identifiant matériel: 2
                   information bus: scsi@3:0.0.0,2
                   nom logique: /dev/sdb2
                   version: 3.1
                   numéro de série: 48b6-8328
                   taille: 448MiB
                   capacité: 449MiB
                   fonctionnalités: boot ntfs initialized
                   configuration : clustersize=4096 created=2016-11-19 01:14:26 filesystem=ntfs label=Récupération state=clean
              *-volume:2
                   description: Windows FAT volume
                   fabricant: MSDOS5.0
                   identifiant matériel: 3
                   information bus: scsi@3:0.0.0,3
                   nom logique: /dev/sdb3
                   nom logique: /boot/efi
                   version: FAT32
                   numéro de série: 037b-08ee
                   taille: 96MiB
                   capacité: 99MiB
                   fonctionnalités: boot fat initialized
                   configuration : FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
              *-volume:3
                   description: Windows NTFS volume
                   fabricant: Windows
                   identifiant matériel: 4
                   information bus: scsi@3:0.0.0,4
                   nom logique: /dev/sdb4
                   version: 3.1
                   numéro de série: 6ce80b02-74d7-2442-be3e-6ae971c62e71
                   taille: 861GiB
                   capacité: 861GiB
                   fonctionnalités: ntfs initialized
                   configuration : clustersize=4096 created=2016-11-19 01:15:07 filesystem=ntfs state=clean
              *-volume:4
                   description: Volume EXT4
                   fabricant: Linux
                   identifiant matériel: 5
                   information bus: scsi@3:0.0.0,5
                   nom logique: /dev/sdb5
                   nom logique: /
                   version: 1.0
                   numéro de série: 5c056e24-56cb-4319-9cb0-8ddaf102d467
                   taille: 68GiB
                   fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                   configuration : created=2020-12-01 14:49:38 filesystem=ext4 lastmountpoint=/ modified=2020-12-08 21:12:48 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro mounted=2020-12-08 21:12:48 state=mounted
              *-volume:5
                   description: Windows NTFS volume
                   fabricant: Windows
                   identifiant matériel: 6
                   information bus: scsi@3:0.0.0,6
                   nom logique: /dev/sdb6
                   version: 3.1
                   numéro de série: cc17-296c
                   taille: 534MiB
                   capacité: 561MiB
                   fonctionnalités: boot ntfs initialized
                   configuration : clustersize=4096 created=2019-10-02 20:29:13 filesystem=ntfs state=clean
           *-disk:2
                description: ATA Disk
                produit: HFS128G32MND-220
                identifiant matériel: 0.0.0
                information bus: scsi@4:0.0.0
                nom logique: /dev/sdc
                version: 0L00
                numéro de série: ES64N40421030455C
                taille: 119GiB (128GB)
                fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                configuration : ansiversion=5 guid=cfe871c3-ecb0-466e-9dca-6cfd2c1b14cf logicalsectorsize=512 sectorsize=512
              *-volume:0
                   description: reserved partition
                   fabricant: Windows
                   identifiant matériel: 1
                   information bus: scsi@4:0.0.0,1
                   nom logique: /dev/sdc1
                   numéro de série: 6e273cce-ee8f-4a8b-911f-5a2c17124986
                   capacité: 127MiB
                   fonctionnalités: nofs
              *-volume:1
                   description: Windows NTFS volume
                   fabricant: Windows
                   identifiant matériel: 2
                   information bus: scsi@4:0.0.0,2
                   nom logique: /dev/sdc2
                   version: 3.1
                   numéro de série: ce9b51b2-7617-a441-9351-8152a67a019d
                   taille: 119GiB
                   capacité: 119GiB
                   fonctionnalités: ntfs initialized
                   configuration : clustersize=4096 created=2020-11-18 10:12:52 filesystem=ntfs state=clean
        *-pci:1
             description: PCI bridge
             produit: 100 Series/C230 Series Chipset Family PCI Express Root Port #5
             fabricant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:122 mémoire:df300000-df3fffff
           *-usb
                description: USB controller
                produit: ASM1142 USB 3.1 Host Controller
                fabricant: ASMedia Technology Inc.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: msi msix pm pciexpress xhci bus_master cap_list
                configuration : driver=xhci_hcd latency=0
                ressources : irq:16 mémoire:df300000-df307fff
              *-usbhost:0
                   produit: xHCI Host Controller
                   fabricant: Linux 5.4.0-56-generic xhci-hcd
                   identifiant matériel: 0
                   information bus: usb@5
                   nom logique: usb5
                   version: 5.04
                   fonctionnalités: usb-2.00
                   configuration : driver=hub slots=2 speed=480Mbit/s
              *-usbhost:1
                   produit: xHCI Host Controller
                   fabricant: Linux 5.4.0-56-generic xhci-hcd
                   identifiant matériel: 1
                   information bus: usb@6
                   nom logique: usb6
                   version: 5.04
                   fonctionnalités: usb-3.10
                   configuration : driver=hub slots=2 speed=10000Mbit/s
        *-pci:2
             description: PCI bridge
             produit: 100 Series/C230 Series Chipset Family PCI Express Root Port #7
             fabricant: Intel Corporation
             identifiant matériel: 1c.6
             information bus: pci@0000:00:1c.6
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:123 portE/S:d000(taille=4096) mémoire:df200000-df2fffff
           *-network
                description: Interface réseau sans fil
                produit: RTL8821AE 802.11ac PCIe Wireless Network Adapter
                fabricant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: wlp3s0
                version: 00
                numéro de série: b0:c0:90:8e:47:d1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration : broadcast=yes driver=rtl8821ae driverversion=5.4.0-56-generic firmware=N/A ip=172.20.10.9 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources : irq:141 portE/S:d000(taille=256) mémoire:df200000-df203fff
        *-pci:3
             description: PCI bridge
             produit: 100 Series/C230 Series Chipset Family PCI Express Root Port #8
             fabricant: Intel Corporation
             identifiant matériel: 1c.7
             information bus: pci@0000:00:1c.7
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:124 portE/S:c000(taille=4096) mémoire:df100000-df1fffff portE/S:d2200000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabricant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:04:00.0
                nom logique: enp4s0
                version: 11
                numéro de série: 34:97:f6:7d:ab:bb
                taille: 1Gbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration : autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
                ressources : irq:19 portE/S:c000(taille=256) mémoire:df100000-df100fff mémoire:d2200000-d2203fff
        *-pci:4
             description: PCI bridge
             produit: 100 Series/C230 Series Chipset Family PCI Express Root Port #9
             fabricant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:125 portE/S:2000(taille=4096) mémoire:90000000-901fffff portE/S:90200000(taille=2097152)
        *-isa
             description: ISA bridge
             produit: H110 Chipset LPC/eSPI Controller
             fabricant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 31
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration : latency=0
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: 100 Series/C230 Series Chipset Family Power Management Controller
             fabricant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 31
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             configuration : latency=0
             ressources : mémoire:df424000-df427fff
        *-multimedia
             description: Audio device
             produit: 100 Series/C230 Series Chipset Family HD Audio Controller
             fabricant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=snd_hda_intel latency=32
             ressources : irq:142 mémoire:df420000-df423fff mémoire:df400000-df40ffff
        *-serial
             description: SMBus
             produit: 100 Series/C230 Series Chipset Family SMBus
             fabricant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 31
             bits: 64 bits
             horloge: 33MHz
             configuration : driver=i801_smbus latency=0
             ressources : irq:16 mémoire:df42a000-df42a0ff portE/S:f000(taille=32)
     *-pnp00:00
          produit: PnP device PNP0c02
          identifiant matériel: 1
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:01
          produit: PnP device PNP0c02
          identifiant matériel: 2
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:02
          produit: PnP device PNP0c02
          identifiant matériel: 3
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:03
          produit: PnP device PNP0b00
          identifiant matériel: 4
          fonctionnalités: pnp
          configuration : driver=rtc_cmos
     *-pnp00:04
          produit: PnP device INT3f0d
          identifiant matériel: 5
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:05
          produit: PnP device PNP0c02
          identifiant matériel: 6
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:06
          produit: PnP device PNP0c02
          identifiant matériel: 7
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:07
          produit: PnP device PNP0c02
          identifiant matériel: 8
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:08
          produit: PnP device PNP0c02
          identifiant matériel: 9
          fonctionnalités: pnp
          configuration : driver=system
  *-power NON-RÉCLAMÉ
       description: To Be Filled By O.E.M.
       produit: To Be Filled By O.E.M.
       fabricant: To Be Filled By O.E.M.
       identifiant matériel: 1
       version: To Be Filled By O.E.M.
       numéro de série: To Be Filled By O.E.M.
       capacité: 32768mWh

Hors ligne

#7 Le 08/12/2020, à 23:00

ferlop

Re : écran noir après le login Ubuntu 20.04

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet pci=noaer splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Est-ce à faire ?

Hors ligne

#8 Le 08/12/2020, à 23:20

ferlop

Re : écran noir après le login Ubuntu 20.04

boot info:

boot-info-4ppa125                                              [20201208_2218]

============================== Boot Info Summary ===============================

 => Windows 7/8/2012 is installed in the MBR of /dev/sda.
 => No known boot loader is installed in the MBR of /dev/sdb.
 => No known boot loader is installed in the MBR of /dev/sdc.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdd.

sda1: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb3: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Acronis/bootwiz.efi /efi/Boot/bkpbootx64.efi 
                       /efi/Boot/bootx64.efi /efi/Boot/fbx64.efi 
                       /efi/Boot/grubx64.efi /efi/Boot/mmx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg 
                       /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi

sdb4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /bootmgr /Windows/System32/winload.exe

sdb5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sdb6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

sdc2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdd1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.04
    Boot sector info:  Syslinux looks at sector 29430 of /dev/sdd1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /efi/BOOT/grubx64.efi /efi/BOOT/mmx64.efi /ldlinux.sys


================================ 2 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession on sdb5
OS#2:   Windows 8 or 10 on sdb4

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-56-generic root=UUID=5c056e24-56cb-4319-9cb0-8ddaf102d467 ro quiet pci=noaer splash vt.handoff=7


===================================== UEFI =====================================

BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.

efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,000A,000B,0000,0006,0009,0003,0005,0002,0004,0007
Boot0000* Windows Boot Manager	HD(3,GPT,104dcf7f-098d-4394-b9a3-30a46f257fab,0x121800,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu	HD(3,GPT,104dcf7f-098d-4394-b9a3-30a46f257fab,0x121800,0x32000)/File(\EFI\UBUNTU\SHIMX64.EFI)
Boot0002* UEFI:CD/DVD Drive	BBS(129,,0x0)
Boot0003  Network Card	BBS(Network,,0x0)..GO..NO........k.R.e.a.l.t.e.k. .P.X.E. .B.0.4. .D.0.0.........................rN.D+..,.\...........<..Gd-.;.A..MQ..L.R.e.a.l.t.e.k. .P.X.E. .B.0.4. .D.0.0........BO
Boot0004* UEFI:Removable Device	BBS(130,,0x0)
Boot0005  USB	BBS(HD,,0x0)..GO..NO........o.U.S.B....................A...........................>..Gd-.;.A..MQ..L.4.S.6.X.F.N.M.0.0.C.4.8.4.0. .K. . . . ........BO..NO........o.T.O.S.H.I.B.A. .D.T.0.1.A.C.A.1.0.0....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . . . .4. .A.6.X.3.G.9.S.N........BO..NO........o.H.F.S.1.2.8.G.3.2.M.N.D.-.2.2.0.0.A....................A...........................>..Gd-.;.A..MQ..L.S.E.4.6.4.N.4.0.1.2.3.0.4.0.5.5. .C. . ........BO
Boot0006* Seagate Portable 9300	VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)..GO
Boot0007* UEFI:Network Device	BBS(131,,0x0)
Boot0009* Seagate Portable 9300	VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)..GO
Boot000A* UEFI: SanDisk	PciRoot(0x0)/Pci(0x14,0x0)/USB(17,0)/HD(1,MBR,0xc9197,0x800,0x729b800)..BO
Boot000B* SanDisk	BBS(HD,,0x0)..BO

cfccdf05dbbc8fdffd56fbf35ff74b17   sdb3/Acronis/bootwiz.efi
78415fb8fb9b909f8029858113f1335f   sdb3/Boot/bkpbootx64.efi
78415fb8fb9b909f8029858113f1335f   sdb3/Boot/bootx64.efi
2895d47544fd587b26c7e29be1295c27   sdb3/Boot/fbx64.efi
ff153da2b5d7c5903a7beb74c84ca901   sdb3/Boot/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84   sdb3/Boot/mmx64.efi
8ed07d5ee4e5e1534bcf64037b7589ff   sdb3/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84   sdb3/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f   sdb3/ubuntu/shimx64.efi
3c080490d0eb8fdb738f298c3e44b3e0   sdb3/Microsoft/Boot/bootmgfw.efi
da7c9088c9d0bff4ac469abdfc8f540e   sdb3/Microsoft/Boot/bootmgr.efi
96a59e7186f7ab840bdc92ba47b89947   sdd1/BOOT/grubx64.efi
4487628005555bfd4a4c0a47211e0700   sdd1/BOOT/mmx64.efi
f7a57b08bc7c1c85417ae4cea582d1d4   sdd1/BOOT/BOOTx64.efi


============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sdb	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	34 sectors * 512 bytes
sda	: is-GPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, no-os,	34 sectors * 512 bytes
sdc	: is-GPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, no-os,	34 sectors * 512 bytes
sdd	: notGPT,	no-BIOSboot,	has---ESP, 	liveusb,	not-mmc, no-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sdb5	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sdb3	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sdb4	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb6	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdc2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdd1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far

Partitions info (2/3): _________________________________________________________

sdb5	: isnotESP,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sdb3	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb4	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	notwinboot
sdb6	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
sdc2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdd1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sdb5	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sda2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sdb2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb3	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb4	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdb6	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb
sdc2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdc
sdd1	: not-sepboot,	no-kernel,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdd

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 9C503D55-85EE-4997-833B-EA9FCF9D0978
       Start        End    Sectors   Size Type
sda1      34     262177     262144   128M Microsoft reserved
sda2  264192 1953523711 1953259520 931.4G Microsoft basic data
Disk sdb: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 2095D2C1-DCDB-4C46-8E97-0C3343304FC1
           Start        End    Sectors  Size Type
sdb1          34     262177     262144  128M Microsoft reserved
sdb2      264192    1185791     921600  450M Windows recovery environment
sdb3     1185792    1390591     204800  100M EFI System
sdb4     1390592 1809012735 1807622144  862G Microsoft basic data
sdb5  1809012736 1952372735  143360000 68.4G Linux filesystem
sdb6  1952372736 1953523711    1150976  562M Windows recovery environment
Disk sdc: 119.25 GiB, 128035676160 bytes, 250069680 sectors
Disk identifier: CFE871C3-ECB0-466E-9DCA-6CFD2C1B14CF
       Start       End   Sectors   Size Type
sdc1      34    262177    262144   128M Microsoft reserved
sdc2  264192 250068991 249804800 119.1G Microsoft basic data
Disk sdd: 57.31 GiB, 61530439680 bytes, 120176640 sectors
Disk identifier: 0x000c9197
      Boot Start       End   Sectors  Size Id Type
sdd1  *     2048 120176639 120174592 57.3G  c W95 FAT32 (LBA)

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:4096:gpt:ATA TOSHIBA DT01ACA1:;
1:17.4kB:134MB:134MB::Microsoft reserved partition:msftres;
2:135MB:1000GB:1000GB:ntfs:Basic data partition:msftdata;
sdb:1000GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:17.4kB:134MB:134MB:::msftres;
2:135MB:607MB:472MB:ntfs::diag;
3:607MB:712MB:105MB:fat32::boot, esp;
4:712MB:926GB:926GB:ntfs::msftdata;
5:926GB:1000GB:73.4GB:ext4::;
6:1000GB:1000GB:589MB:ntfs::diag;
sdc:128GB:scsi:512:512:gpt:ATA HFS128G32MND-220:;
1:17.4kB:134MB:134MB:::msftres;
2:135MB:128GB:128GB:ntfs::msftdata;
sdd:61.5GB:scsi:512:512:msdos:SanDisk Ultra USB 3.0:;
1:1049kB:61.5GB:61.5GB:fat32::boot, lba;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL        PARTLABEL
sda                                                                                                    
├─sda1                                               4973300b-2041-4ba1-9e5c-9c818c180f26              Microsoft reserved partition
└─sda2 ntfs     18BA0256BA0230B4                     435a0516-b6e8-4aae-a772-2306fad545a3 New Volume   Basic data partition
sdb                                                                                                    
├─sdb1                                               37cc98a9-7115-4843-a485-920986b18190              
├─sdb2 ntfs     173C5AC248B68328                     7e4b2c15-b078-425d-81b4-17b673355e25 Récupération 
├─sdb3 vfat     037B-08EE                            104dcf7f-098d-4394-b9a3-30a46f257fab              
├─sdb4 ntfs     6085977C22E32542                     b8eaf3e9-92a6-4faa-b761-b12c557f7cab              
├─sdb5 ext4     5c056e24-56cb-4319-9cb0-8ddaf102d467 65a83297-bdfc-4832-899b-1a3f6c6efe0b              
└─sdb6 ntfs     CA473AA1CC17296C                     81bdf6f4-6361-4a3a-885f-9ce69cb60ce1              
sdc                                                                                                    
├─sdc1                                               6e273cce-ee8f-4a8b-911f-5a2c17124986              
└─sdc2 ntfs     6238FF1738FEE945                     882c9548-57e1-4dd0-bb0f-a4d98f8f597a              
sdd                                                                                                    
└─sdd1 vfat     15EF-3A0F                            000c9197-01                          UBUNTU 20_0  

df (filtered): _________________________________________________________________

                   Avail Use% Mounted on
sda2              218.4G  77% /mnt/boot-sav/sda2
sdb2              438.7M   3% /mnt/boot-sav/sdb2
sdb4              142.7G  83% /mnt/boot-sav/sdb4
sdb5               10.4G  79% /
sdb6               65.6M  88% /mnt/boot-sav/sdb6
sdc2               96.2G  19% /mnt/boot-sav/sdc2
sdd1               54.7G   5% /mnt/boot-sav/sdd1

Mount options: __________________________________________________________________

sda2              rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb2              rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb4              rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb5              rw,relatime,errors=remount-ro
sdb6              rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdc2              rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdd1              rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro

===================== sdb3/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid 5c056e24-56cb-4319-9cb0-8ddaf102d467 root hd1,gpt5 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg

====================== sdb5/boot/grub/grub.cfg (filtered) ======================

Ubuntu   5c056e24-56cb-4319-9cb0-8ddaf102d467
Ubuntu, avec Linux 5.4.0-56-generic   5c056e24-56cb-4319-9cb0-8ddaf102d467
Ubuntu, avec Linux 5.4.0-42-generic   5c056e24-56cb-4319-9cb0-8ddaf102d467
Windows Boot Manager (sur sdb3)   osprober-efi-037B-08EE
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings   uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb5/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb5 during installation
UUID=5c056e24-56cb-4319-9cb0-8ddaf102d467 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb3 during installation
UUID=037B-08EE  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0

======================= sdb5/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet pci=noaer splash"
GRUB_CMDLINE_LINUX=""

==================== sdb5: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 891,220561981 = 956,940791808  boot/grub/grub.cfg                             2
 888,295059204 = 953,799557120  boot/vmlinuz                                   1
 867,076290131 = 931,016077312  boot/vmlinuz-5.4.0-42-generic                  1
 888,295059204 = 953,799557120  boot/vmlinuz-5.4.0-56-generic                  1
 867,076290131 = 931,016077312  boot/vmlinuz.old                               1
 928,031948090 = 996,466716672  boot/initrd.img                                1
 866,689094543 = 930,600329216  boot/initrd.img-5.4.0-42-generic               3
 928,031948090 = 996,466716672  boot/initrd.img-5.4.0-56-generic               1
 866,689094543 = 930,600329216  boot/initrd.img.old                            3

===================== sdb5: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 nov.  13 00:15 10_linux
-rwxr-xr-x 1 root root 42359 nov.  13 00:15 10_linux_zfs
-rwxr-xr-x 1 root root 12894 juil. 31 02:34 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 31 02:34 30_os-prober
-rwxr-xr-x 1 root root  1424 juil. 31 02:34 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 31 02:34 40_custom
-rwxr-xr-x 1 root root   216 juil. 31 02:34 41_custom

====================== sdd1/boot/grub/grub.cfg (filtered) ======================

Ubuntu
Ubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings

========================= sdd1/syslinux.cfg (filtered) =========================

DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/

==================== sdd1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
            ?? = ??             boot/grub/grub.cfg                             1

================== sdd1: Location of files loaded by Syslinux ==================

           GiB - GB             File                                 Fragment(s)
            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown MBR on /dev/sdb

00000000  e8 14 01 b9 f0 01 be 10  7c bf 10 06 57 f3 a4 c3  |........|...W...|
00000010  8b 4e 14 83 f9 0e 75 08  8d 5e 07 43 02 07 e2 fb  |.N....u..^.C....|
00000020  8c 56 0c 8c 56 0e 75 69  8a 56 10 84 d2 79 62 e8  |.V..V.ui.V...yb.|
00000030  f8 00 bb aa 55 cd 13 72  6f 3b 5e 5c 75 6a d1 e9  |....U..ro;^\uj..|
00000040  73 66 b4 42 c6 46 02 01  eb 66 89 b6 f6 fe 8a 44  |sf.B.F...f.....D|
00000050  04 84 c0 74 0f 3c 05 74  0b 3c 0f 74 07 8a 14 80  |...t.<.t.<.t....|
00000060  e2 80 75 cb 83 c6 10 06  c4 5c 08 89 5e 08 8c 46  |..u......\..^..F|
00000070  0a 07 fe 8e f9 fe 75 d2  b0 31 c6 46 d5 50 88 46  |......u..1.F.P.F|
00000080  d2 be 68 07 ac 84 c0 74  08 b4 0e b3 07 cd 10 eb  |..h....t........|
00000090  f3 e8 83 00 88 46 11 be  ae 07 3c 05 75 c6 cd 16  |.....F....<.u...|
000000a0  33 d2 89 56 08 89 56 0a  e8 7f 00 72 1d b8 01 02  |3..V..V....r....|
000000b0  bf 05 00 8b dc 56 50 50  52 32 e4 cd 13 5a 58 8b  |.....VPPR2...ZX.|
000000c0  f5 cd 13 58 5e 73 03 4f  75 e9 b0 32 72 b0 40 8a  |...X^s.Ou..2r.@.|
000000d0  66 11 9e 7b 04 c6 47 02  0e 72 35 75 0c 88 57 40  |f..{..G..r5u..W@|
000000e0  c4 4e 08 89 4f 1c 8c 47  1e 79 06 8a 4e 12 88 4f  |.N..O..G.y..N..O|
000000f0  25 80 c7 02 81 7f fe 55  aa 75 83 81 7f fa cd 19  |%......U.u......|
00000100  75 09 c6 47 fa e9 c7 47  fb 94 88 e8 1c 00 ff e4  |u..G...G........|
00000110  74 ce 88 57 24 eb c9 5d  33 c0 8e d8 8e c0 8e d0  |t..W$..]3.......|
00000120  bc 00 7c 55 bd a2 07 fc  fb c3 b4 08 52 06 cd 13  |..|U........R...|
00000130  07 72 2f 33 db 8a de 8b  46 0a 33 d2 83 e1 3f f7  |.r/3....F.3...?.|
00000140  f1 91 97 8b 46 08 f7 f7  42 87 ca 3b da 72 13 43  |....F...B..;.r.C|
00000150  f7 f3 8a f2 86 c5 d1 e8  d1 e8 0a c8 d0 cc d0 cc  |................|
00000160  0a f4 b4 41 5b 8a d3 c3  0d 0a 4d 42 52 20 45 72  |...A[.....MBR Er|
00000170  72 6f 72 20 00 0d 0a 00  72 65 73 73 20 61 6e 79  |ror ....ress any|
00000180  20 6b 65 79 20 74 6f 20  62 6f 6f 74 20 66 72 6f  | key to boot fro|
00000190  6d 20 66 6c 6f 70 70 79  2e 2e 2e 00 00 00 00 00  |m floppy........|
000001a0  00 00 10 00 01 00 00 7c  00 00 00 00 00 00 00 00  |.......|........|
000001b0  00 00 00 00 00 00 00 00  07 03 f4 2e 00 00 00 00  |................|
000001c0  02 00 ee ff ff ff 01 00  00 00 af 6d 70 74 00 00  |...........mpt..|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown MBR on /dev/sdc

00000000  e8 14 01 b9 f0 01 be 10  7c bf 10 06 57 f3 a4 c3  |........|...W...|
00000010  8b 4e 14 83 f9 0e 75 08  8d 5e 07 43 02 07 e2 fb  |.N....u..^.C....|
00000020  8c 56 0c 8c 56 0e 75 69  8a 56 10 84 d2 79 62 e8  |.V..V.ui.V...yb.|
00000030  f8 00 bb aa 55 cd 13 72  6f 3b 5e 5c 75 6a d1 e9  |....U..ro;^\uj..|
00000040  73 66 b4 42 c6 46 02 01  eb 66 89 b6 f6 fe 8a 44  |sf.B.F...f.....D|
00000050  04 84 c0 74 0f 3c 05 74  0b 3c 0f 74 07 8a 14 80  |...t.<.t.<.t....|
00000060  e2 80 75 cb 83 c6 10 06  c4 5c 08 89 5e 08 8c 46  |..u......\..^..F|
00000070  0a 07 fe 8e f9 fe 75 d2  b0 31 c6 46 d5 50 88 46  |......u..1.F.P.F|
00000080  d2 be 68 07 ac 84 c0 74  08 b4 0e b3 07 cd 10 eb  |..h....t........|
00000090  f3 e8 83 00 88 46 11 be  ae 07 3c 05 75 c6 cd 16  |.....F....<.u...|
000000a0  33 d2 89 56 08 89 56 0a  e8 7f 00 72 1d b8 01 02  |3..V..V....r....|
000000b0  bf 05 00 8b dc 56 50 50  52 32 e4 cd 13 5a 58 8b  |.....VPPR2...ZX.|
000000c0  f5 cd 13 58 5e 73 03 4f  75 e9 b0 32 72 b0 40 8a  |...X^s.Ou..2r.@.|
000000d0  66 11 9e 7b 04 c6 47 02  0e 72 35 75 0c 88 57 40  |f..{..G..r5u..W@|
000000e0  c4 4e 08 89 4f 1c 8c 47  1e 79 06 8a 4e 12 88 4f  |.N..O..G.y..N..O|
000000f0  25 80 c7 02 81 7f fe 55  aa 75 83 81 7f fa cd 19  |%......U.u......|
00000100  75 09 c6 47 fa e9 c7 47  fb 94 88 e8 1c 00 ff e4  |u..G...G........|
00000110  74 ce 88 57 24 eb c9 5d  33 c0 8e d8 8e c0 8e d0  |t..W$..]3.......|
00000120  bc 00 7c 55 bd a2 07 fc  fb c3 b4 08 52 06 cd 13  |..|U........R...|
00000130  07 72 2f 33 db 8a de 8b  46 0a 33 d2 83 e1 3f f7  |.r/3....F.3...?.|
00000140  f1 91 97 8b 46 08 f7 f7  42 87 ca 3b da 72 13 43  |....F...B..;.r.C|
00000150  f7 f3 8a f2 86 c5 d1 e8  d1 e8 0a c8 d0 cc d0 cc  |................|
00000160  0a f4 b4 41 5b 8a d3 c3  0d 0a 4d 42 52 20 45 72  |...A[.....MBR Er|
00000170  72 6f 72 20 00 0d 0a 00  72 65 73 73 20 61 6e 79  |ror ....ress any|
00000180  20 6b 65 79 20 74 6f 20  62 6f 6f 74 20 66 72 6f  | key to boot fro|
00000190  6d 20 66 6c 6f 70 70 79  2e 2e 2e 00 00 00 00 00  |m floppy........|
000001a0  00 00 10 00 01 00 00 7c  00 00 00 00 00 00 00 00  |.......|........|
000001b0  00 00 00 00 00 f2 0e 00  5e 35 d6 18 00 00 00 00  |........^5......|
000001c0  02 00 ee fc 1f cd 01 00  00 00 af ba e7 0e 00 00  |................|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


Unmount sdd1 from /media/ferlop/UBUNTU 20_0/ to avoid special characters (& or \ or space) incompatibilities

Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
sdb5,
using the following options:        sdb3/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file  restore-efi-backups  

Confirmation request before suggested repair: __________________________________

The boot of your PC is in Secure mode. You may want to retry after changing it to non-Secure mode.
Are you sure you want to continue anyway?

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession entry (sdb3/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.

If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)

Hors ligne

#9 Le 09/12/2020, à 21:41

lucmars

Re : écran noir après le login Ubuntu 20.04

ferlop a écrit :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet pci=noaer splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Est-ce à faire ?

Tu veux dire de l'inscrire pour de bon dans le /etc/default/grub du disque ? Je dirais oui.

Si ça daube, tu repasses par "e" ou par une clef/dvd. Mais je pense que ça va le faire.


Gaulois Matter !

Hors ligne

#10 Le 09/12/2020, à 21:46

ferlop

Re : écran noir après le login Ubuntu 20.04

Oui, maintenant ça marche bien, par ailleurs avec la carte réseau filaire de la carte mère l'Internet était très lent, j'ai pris un USB3 ---> Ethernet et ça devient super fluide, je pense qu'il y avait un problème avec la carte intégrée.

J'ai lu dans le forum que la connexion Internet pouvait enregistrer des petits fichiers de je ne sais quoi (liés à la connexion) jusqu'à remplir la partition, est-ce vrai ? Que puis je faire ?

Merci beaucoup !!

Hors ligne

#11 Le 09/12/2020, à 22:12

lucmars

Re : écran noir après le login Ubuntu 20.04

ferlop a écrit :

J'ai lu dans le forum que la connexion Internet pouvait enregistrer des petits fichiers de je ne sais quoi (liés à la connexion) jusqu'à remplir la partition, est-ce vrai ? Que puis je faire ?

C'est p'tete pas ton cas, mais en effet il existe des composants wifi/ethernet qui générent une logorrhé de log.

Recherche sur la toile ou dans la doc tes

lshw a écrit :

RTL8821AE 802.11ac PCIe Wireless Network Adapter et RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller

à vu de nez/mémoire c'est ok.


Gaulois Matter !

Hors ligne