#1 Le 08/04/2020, à 12:46
- Jarodd
Nemo - Restaurer le copier coller
Bonjour,
J'utilise Ubuntu 18.04 (à jour) et Nemo 3.6.5, avec nautilus-scripts-manager et les équivalents nemo.
Parfois lorsque je fais des copies/déplacements de fichiers d'un panneau à l'autre (panneaux ouverts avec la touches F3), le copie coller plante, il se stoppe en cours de route. Et là je n'arrive plus à le relancer, même en fermant/killant nemo. La seule solution est de redémarrer le système.
Il s'agit bien du copier coller dans Nemo, si je passe par Nautilus, cela fonctionne bien., idem avec les commandes cp ou mv.
Existe-t-il un moyen de relancer le copier-coller dans Nemo, sans devoir redémarrer ?
Merci pour votre aide.
Dernière modification par Jarodd (Le 08/04/2020, à 12:48)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#2 Le 11/04/2020, à 18:35
- Roschan
Re : Nemo - Restaurer le copier coller
Ouvre nemo depuis un terminal et reproduit le bug, et dis nous ce qui s'écrit dans le terminal
Hors ligne
#3 Le 19/04/2020, à 14:57
- Jarodd
Re : Nemo - Restaurer le copier coller
Bonjour,
Je viens d'essayer, je n'ai aucun log. Quand je tape "nemo" et que je valide, il s'ouvre mais dans le terminal je peux reprendre la main et taper une autre commande.
jarodd@ubuntu:~$ nemo
jarodd@ubuntu:~$
Je reproduis le bug du copier coller, mais je n'ai pas de log ou d'erreur dans le terminal.
Dernière modification par Jarodd (Le 19/04/2020, à 14:57)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#4 Le 19/04/2020, à 16:25
- Roschan
Re : Nemo - Restaurer le copier coller
Ah zut...
killall -9 nemo && nemo
peut-être ?
Hors ligne
#5 Le 19/04/2020, à 16:31
- Jarodd
Re : Nemo - Restaurer le copier coller
Je viens de tenter, mais non. Si un copier a planté avant, plus rien ne passe. A moins de redémarrer le système...
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#6 Le 19/04/2020, à 18:12
- moko138
Re : Nemo - Restaurer le copier coller
Hier, sur un autre de tes fils à problèmes, ./viewtopic.php?pid=22263651#p22263651, kamaris t'a demandé :
Vérifier le système de fichiers ?
Et il est même plus prudent d'examiner d'abord les données SMART du disque, pour déterminer s'il est en état de supporter sans dommages supplémentaires une vérification du système de fichiers.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 19/04/2020, à 19:08
- Jarodd
Re : Nemo - Restaurer le copier coller
Exact, j'ai répondu que j'étais sur du ext4.
Pour les données smart, je dois vérifier quelle(s) partition(s) ?
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#8 Le 19/04/2020, à 19:45
- Roschan
Re : Nemo - Restaurer le copier coller
Hier, sur un autre de tes fils à problèmes, ./viewtopic.php?pid=22263651#p22263651, kamaris t'a demandé :
Vérifier le système de fichiers ?
Et il est même plus prudent d'examiner d'abord les données SMART du disque, pour déterminer s'il est en état de supporter sans dommages supplémentaires une vérification du système de fichiers.
Même si on n'est jamais trop prudent, je souligne quand même que ça marche avec Nautilus ou le terminal
Hors ligne
#9 Le 19/04/2020, à 20:54
- Jarodd
Re : Nemo - Restaurer le copier coller
$ sudo parted -l
Modèle : ATA HGST HTS721010A9 (scsi)
Disque /dev/sda : 1000GB
Taille des secteurs (logiques/physiques) : 512B/4096B
Table de partitions : gpt
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Nom Drapeaux
1 1049kB 1000GB 1000GB data
Modèle : Seagate Expansion (scsi)
Disque /dev/sdb : 4001GB
Taille des secteurs (logiques/physiques) : 512B/4096B
Table de partitions : gpt
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Nom Drapeaux
1 1049kB 4001GB 4001GB ext4 4TO
Modèle : Seagate Expansion Desk (scsi)
Disque /dev/sdc : 6001GB
Taille des secteurs (logiques/physiques) : 512B/4096B
Table de partitions : gpt
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Nom Drapeaux
1 17,4kB 134MB 134MB Microsoft reserved partition msftres
2 135MB 6001GB 6001GB ntfs Seagate_6TO msftdata
Modèle : WD My Passport 2627 (scsi)
Disque /dev/sdd : 5001GB
Taille des secteurs (logiques/physiques) : 512B/4096B
Table de partitions : gpt
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Nom Drapeaux
1 1049kB 5001GB 5001GB ntfs 5TO msftdata
Modèle : Mappeur de périphériques Linux (crypt) (dm)
Disque /dev/mapper/luks-04462ec9-9155-4af6-92d1-8455a8537077 : 1000GB
Taille des secteurs (logiques/physiques) : 512B/4096B
Table de partitions : loop
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Drapeaux
1 0,00B 1000GB 1000GB ext4
Erreur: /dev/mapper/vgRecup-root : étiquette de disque inconnue
Modèle : Mappeur de périphériques Linux (linear) (dm)
Disque /dev/mapper/vgRecup-root : 510GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : unknown
Drapeaux de disque :
Erreur: /dev/mapper/vgRecup-swap_1 : étiquette de disque inconnue
Modèle : Mappeur de périphériques Linux (linear) (dm)
Disque /dev/mapper/vgRecup-swap_1 : 1028MB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : unknown
Drapeaux de disque :
Erreur: /dev/mapper/luks-f066864a-2884-4691-9bb9-8832c3201579 : étiquette de
disque inconnue
Modèle : Mappeur de périphériques Linux (crypt) (dm)
Disque /dev/mapper/luks-f066864a-2884-4691-9bb9-8832c3201579 : 511GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : unknown
Drapeaux de disque :
Modèle : Mappeur de périphériques Linux (linear) (dm)
Disque /dev/mapper/ubuntu--vg-swap_1 : 1028MB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : loop
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Drapeaux
1 0,00B 1028MB 1028MB linux-swap(v1)
Modèle : Mappeur de périphériques Linux (linear) (dm)
Disque /dev/mapper/ubuntu--vg-root : 254GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : loop
Drapeaux de disque :
Numéro Début Fin Taille Système de fichiers Drapeaux
1 0,00B 254GB 254GB ext4
Erreur: /dev/mapper/nvme0n1p5_crypt : étiquette de disque inconnue
Modèle : Mappeur de périphériques Linux (crypt) (dm)
Disque /dev/mapper/nvme0n1p5_crypt : 255GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : unknown
Drapeaux de disque :
Modèle : KINGSTON RBUSNS8154P3256GJ (nvme)
Disque /dev/nvme0n1 : 256GB
Taille des secteurs (logiques/physiques) : 512B/512B
Table de partitions : msdos
Drapeaux de disque :
Numéro Début Fin Taille Type Système de fichiers Drapeaux
1 1049kB 768MB 767MB primary ext4 démarrage
2 769MB 256GB 255GB extended
5 769MB 256GB 255GB logical
Je ne sais pas sur quel "device" je dois faire le smartctl...
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#10 Le 20/04/2020, à 02:29
- moko138
Re : Nemo - Restaurer le copier coller
Exact, j'ai répondu que j'étais sur du ext4.
C'est comme si, alors que tu m'avais dit de vérifier la pression des pneus, je t'avais seulement répondu "j'ai des pneus neige Michelin".
= =
Pour les données smart, je dois vérifier quelle(s) partition(s) ?
Aucune.
Garde en mémoire de ne pas confondre, même si on les consomme simultanément, ces trois couches que sont la confiture, le beurre et la biscotte.
COUCHES ÉQUIVALENT-DISQUE OUTIL DE DIAGNOSTIC, voire de soin
confiture(s) le(s) FS des partitions fsck (si FS linuxien) Reformatage
beurre(s) la ou les partitions fdisk, parted, gdisk... Reformatage
biscotte le disque smartctl (diagnostic SEUL)
On voit que si la biscotte est fendue, réétaler la confiture (fsck) ou reformater n'y changeront rien.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 20/04/2020, à 02:38
- moko138
Re : Nemo - Restaurer le copier coller
Même si on n'est jamais trop prudent, je souligne quand même que ça marche avec Nautilus ou le terminal
Oui, nautilus et cp peuvent fonctionner si le disque n'est abîmé que sous la partie du FS accueillant nemo,
Bien entendu, ce n'est pas la seule hypothèse. Mais tu sais aussi bien que moi que quand des problèmes hétérogènes surviennent, on doit envisager un problème matériel.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 20/04/2020, à 03:38
- moko138
Re : Nemo - Restaurer le copier coller
Je ne sais pas sur quel "device" je dois faire le smartctl...
Mais sur les cinq (même si a priori le suspect est unique) :
sudo smartctl -s on -S on -a /dev/nvme0n1
puis
sudo smartctl -s on -S on -a /dev/sda
sudo smartctl -s on -S on -a /dev/sdb
sudo smartctl -s on -S on -a /dev/sdc
sudo smartctl -s on -S on -a /dev/sdd
.
Et pour obtenir une désignation stable des /dev/, réutilisable ultérieurement, montre aussi :
sudo lsblk -o name,fstype,size,label,mountpoint | grep -v loop ; echo -e "\n\t\t\t= = =\nDésignations...\n\t...stables\t\t\t ...instables :"; ls -l /dev/disk/by-id | grep -Evi "\-part|Reader" | awk '{print $9,$11}' | sort -k2 | column -s' ' -t
.
Pour la lisibilité, merci de bien séparer les six retours
comme
ceci.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 20/04/2020, à 13:00
- Jarodd
Re : Nemo - Restaurer le copier coller
J'espère ne pas m'être trompé.
jarodd@ubuntu:~$ sudo smartctl -s on -S on -a /dev/nvme0n1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON RBUSNS8154P3256GJ
Serial Number: 50026B7682201961
Firmware Version: E8FK11.C
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0xb72600
Total NVM Capacity: 256060514304 [256 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 256060514304 [256 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Mon Apr 20 12:56:48 2020 CEST
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0007): Security Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.90W 0.0790W - 0 0 0 0 600 600
1 + 7.90W 0.0790W - 0 0 0 0 600 600
2 + 7.90W 0.0790W - 0 0 0 0 600 600
3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000
4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
Read NVMe SMART/Health Information failed: NVMe Status 0x02
jarodd@ubuntu:~$ sudo smartctl -s on -S on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 7K1000
Device Model: HGST HTS721010A9E630
Serial Number: JR100XBNJ8DKYE
LU WWN Device Id: 5 000cca 8e6e00132
Firmware Version: JB0OA3U0
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 20 12:56:52 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 171) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 125 125 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 781
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 3705
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 521
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 60
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 3694
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 16/49)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jarodd@ubuntu:~$ sudo smartctl -s on -S on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x0bc2:0x231a (0x710)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
jarodd@ubuntu:~$ sudo smartctl -s on -S on -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdc failed: No such device
jarodd@ubuntu:~$ sudo smartctl -s on -S on -a /dev/sdd
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdd failed: No such device
jarodd@ubuntu:~$ sudo lsblk -o name,fstype,size,label,mountpoint | grep -v loop ; echo -e "\n\t\t\t= = =\nDésignations...\n\t...stables\t\t\t ...instables :"; ls -l /dev/disk/by-id | grep -Evi "\-part|Reader" | awk '{print $9,$11}' | sort -k2 | column -s' ' -t
NAME FSTYPE SIZE LABEL MOUNTPOINT
sda 931,5G
└─sda1 crypto_LUKS 931,5G
└─luks-04462ec9-9155-4af6-92d1-8455a8537077 ext4 931,5G /media/jarodd/207ae40d-751f-4e15-b284-4fcff07df698
sdb 3,7T
└─sdb1 ext4 3,7T 4TO /media/jarodd/4TO
nvme0n1 238,5G
├─nvme0n1p1 ext4 731M /boot
├─nvme0n1p2 1K
└─nvme0n1p5 crypto_LUKS 237,8G
└─nvme0n1p5_crypt LVM2_member 237,8G
├─ubuntu--vg-root ext4 236,8G /
└─ubuntu--vg-swap_1 swap 980M [SWAP]
= = =
Désignations...
...stables ...instables :
dm-name-nvme0n1p5_crypt ../../dm-0
dm-uuid-CRYPT-LUKS1-11e5cd94d0a9497986d1959f2c5f0586-nvme0n1p5_crypt ../../dm-0
lvm-pv-uuid-1PJ2hn-C4Er-k9sA-qlpE-kPny-7pBj-pETfv0 ../../dm-0
dm-name-ubuntu--vg-root ../../dm-1
dm-uuid-LVM-M5bWdC8FiUoJYSL1eeG8uznQJTRvDTzMguF1cNuiOgyWgh1Jhcob49vF1mxgF56q ../../dm-1
dm-name-ubuntu--vg-swap_1 ../../dm-2
dm-uuid-LVM-M5bWdC8FiUoJYSL1eeG8uznQJTRvDTzMqPCuGuIlLSE6Z1IcHzlBJLO41RXJtHsI ../../dm-2
dm-name-luks-04462ec9-9155-4af6-92d1-8455a8537077 ../../dm-3
dm-uuid-CRYPT-LUKS1-04462ec991554af692d18455a8537077-luks-04462ec9-9155-4af6-92d1-8455a8537077 ../../dm-3
nvme-eui.0026b76822019615 ../../nvme0n1
nvme-KINGSTON_RBUSNS8154P3256GJ_50026B7682201961 ../../nvme0n1
ata-HGST_HTS721010A9E630_JR100XBNJ8DKYE ../../sda
wwn-0x5000cca8e6e00132 ../../sda
usb-Seagate_Expansion_NAAEK0SJ-0:0 ../../sdb
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#14 Le 20/04/2020, à 17:42
- moko138
Re : Nemo - Restaurer le copier coller
Pour sdb derrière son USB bridge 0x0bc2:0x231a, montre :
sudo smartctl -s on -S on -d sat -a /dev/disk/by-id/usb-Seagate_Expansion_NAAEK0SJ-0:0
.
Le Travelstar 7K1000 (sda) est en parfait état.
Pour le reste, on est mal :
https://www.smartmontools.org/wiki/NVMe … Mesupport1 affirme :
"Smartmontools supporte le NVMe à partir de la version 6.5."
et tu as smartctl 6.6, donc tout devrait rouler... Cependant :
"Veuillez noter que, à ce jour, le support du NVMe est encore expérimental."
Dès lors, concernant ton Kingston RBUSNS8154P3256GJ (nvme0n1),
j'ai un doute. Cette fin en queue de poisson :
=== START OF SMART DATA SECTION ===
Read NVMe SMART/Health Information failed: NVMe Status 0x02
là où (même lien) l'exemple montré est :
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
suivi d'une soixantaine de lignes,
signifie-t-elle
- que ton nvme se meurt ?
- ou bien, qu'en raison du caractère encore expérimental ou pour toute autre raison, smartctl n'a pas pu accéder à l'état de santé de ton nvme ?
À la lettre, oui, ton nvme se meurt : c'est le sens d'un "FAILED" au lieu d'un "PASSED" à cet endroit-là.
(Compare avec ton Travelstar 7K1000 :
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
(...)
). Du moins, pour les HDD pleinement supportés, pour lesquels smartctl affiche le "PASSED" ou le "FAILED" en majuscules.
Mais là on a un "failed" discret en minuscules.
Et tu n'as signalé que deux dysfonctionnements mineurs :
pour un disque mourant, ça me paraît peu.
J'entrevois une troisième hypothèse :
Vu la disparition soudaine de sdc et sdd
- les as-tu débranchés ou ont-ils disparu malgré toi ? -
dans le second cas, je pencherais pour un problème de carte-mère, soit de contrôleur de disque, soit encore plus près du cpu.
Quoi qu'il en soit, dans le doute,
a) Sauvegarde ailleurs les éventuelles données précieuses que tu aurais sur ton nvme ;
b) Réponds à la question ci-dessus ;
c) Montre le retour de la nouvelle commande relative à sdb.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 20/04/2020, à 19:37
- Jarodd
Re : Nemo - Restaurer le copier coller
Ouch merci pour ces infos. Je me demandais si le résultat des commandes était réellement interprêtable, apparemment oui
Pour tes questions :
a) je pense être à jour des sauvegardes.
b) j'ai 2 disques que je n'allume que pour sauvegarder, donc c'est normal si certains n'apparaissent plus. Je ne me rappelle plus de leur état quand j'ai tapé ces commandes, mais en général je ne les allume que le temps de la sauvegarde.
c)
jarodd@ubuntu:~$ sudo smartctl -s on -S on -d sat -a /dev/disk/by-id/usb-Seagate_Expansion_NAAEK0SJ-0:0
[sudo] Mot de passe de jarodd :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
jarodd@ubuntu:~$
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#16 Le 21/04/2020, à 03:15
- moko138
Re : Nemo - Restaurer le copier coller
J'ai demandé du renfort.
- -
Pour a) : bien !
Pour b) : ça éloigne la piste du problème sur carte-mère.
Pour c) recommence comme ceci :
sudo smartctl -T verypermissive -s on -S on -d sat -a /dev/disk/by-id/usb-Seagate_Expansion_NAAEK0SJ-0:0
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 21/04/2020, à 10:43
- Jarodd
Re : Nemo - Restaurer le copier coller
Bonjour
c)
jarodd@ubuntu:~$ sudo smartctl -T verypermissive -s on -S on -d sat -a /dev/disk/by-id/usb-Seagate_Expansion_NAAEK0SJ-0:0
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Tue Apr 21 10:42:31 2020 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported field in scsi command
SMART Enable Attribute Autosave failed: scsi error unsupported field in scsi command
Read SMART Data failed: scsi error unsupported field in scsi command
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error unsupported field in scsi command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Error Log failed: scsi error unsupported field in scsi command
Read SMART Self-test Log failed: scsi error unsupported field in scsi command
Selective Self-tests/Logging not supported
jarodd@ubuntu:~$
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#18 Le 21/04/2020, à 12:20
- Nuliel
Re : Nemo - Restaurer le copier coller
Pour exclure le problème de version de smartctl, on peut utiliser la dernière version de smartctl. Je te laisse donner tous les retours
sudo apt install subversion build-essential
svn co https://svn.code.sf.net/p/smartmontools/code/trunk/smartmontools smartmontools
cd smartmontools
./autogen.sh
mkdir res
./configure --prefix=$HOME/smartmontools/res
make
make install
cd res/sbin
sudo ./smartctl -a /dev/disk/by-id/nvme-KINGSTON_RBUSNS8154P3256GJ_50026B7682201961
(je me suis basé sur https://forum.ubuntu-fr.org/viewtopic.p … #p22040541 , moko peux tu confirmer que tester la dernière version de smartctl est pour vérifier le nvme?)
Hors ligne
#19 Le 21/04/2020, à 13:38
- Jarodd
Re : Nemo - Restaurer le copier coller
J'ai tapé toutes ces commandes, mais pour cd res/sbin, je ne peux pas car res est vide. J'ai bien fait make et make install juste avant.
jarodd@ubuntu:/var/www$ svn co https://svn.code.sf.net/p/smartmontools/code/trunk/smartmontools smartmontools
A smartmontools/os_win32
A smartmontools/os_win32/vc14
A smartmontools/os_win32/update-smart-drivedb.nsi
A smartmontools/os_win32/versioninfo.rc.in
A smartmontools/ChangeLog
A smartmontools/os_win32/daemon_win32.cpp
A smartmontools/os_win32/popen.h
A smartmontools/os_win32/runcmd.c
A smartmontools/os_win32/smartd_warning.cmd
A smartmontools/configure.ac
A smartmontools/os_win32/syslogevt.mc
A smartmontools/os_win32/wmiquery.h
A smartmontools/os_win32/default.manifest
A smartmontools/utility.h
A smartmontools/examplescripts
A smartmontools/os_linux.cpp
A smartmontools/update-smart-drivedb.8.in
A smartmontools/json.cpp
A smartmontools/os_win32.cpp
A smartmontools/ataprint.cpp
A smartmontools/README
A smartmontools/examplescripts/Example8
A smartmontools/NEWS
A smartmontools/update-smart-drivedb.in
A smartmontools/json.h
A smartmontools/drivedb.h
A smartmontools/dev_jmb39x_raid.cpp
A smartmontools/dev_interface.cpp
A smartmontools/smartctl.8.in
A smartmontools/smartd.conf.5.in
A smartmontools/examplescripts/Example7
A smartmontools/examplescripts/Example1
A smartmontools/examplescripts/Example6
A smartmontools/examplescripts/Example3
A smartmontools/smartd.cpp
A smartmontools/nvmeprint.cpp
A smartmontools/scsicmds.cpp
A smartmontools/scsicmds.h
A smartmontools/examplescripts/Example5
A smartmontools/examplescripts/Example4
A smartmontools/atacmdnames.cpp
A smartmontools/atacmds.h
A smartmontools/nvmecmds.cpp
A smartmontools/scsiprint.cpp
A smartmontools/cppcheck.sh
A smartmontools/static_assert.h
A smartmontools/os_netbsd.cpp
A smartmontools/os_freebsd.cpp
A smartmontools/INSTALL
A smartmontools/smartctl.cpp
A smartmontools/Makefile.am
A smartmontools/dev_intelliprop.cpp
A smartmontools/dev_interface.h
A smartmontools/os_win32/vc14/smartctl.vcxproj
A smartmontools/os_win32/vc14/smartctl.vcxproj.filters
A smartmontools/os_win32/vc14/smartd.vcxproj
A smartmontools/os_win32/vc14/smartd.vcxproj.filters
A smartmontools/os_win32/vc14/runcmd.vcxproj
A smartmontools/os_win32/vc14/smartmontools.sln
A smartmontools/os_win32/vc14/wtssendmsg.vcxproj
A smartmontools/dev_tunnelled.h
A smartmontools/scsinvme.cpp
A smartmontools/os_win32/installer.nsi
A smartmontools/os_win32/syslog_win32.cpp
A smartmontools/os_win32/wtssendmsg.c
A smartmontools/os_win32/daemon_win32.h
A smartmontools/os_win32/popen_win32.cpp
A smartmontools/os_win32/smartd_mailer.ps1
A smartmontools/os_win32/syslog.h
A smartmontools/os_win32/wmiquery.cpp
A smartmontools/os_win32/smartd_mailer.conf.sample.ps1
A smartmontools/utility.cpp
A smartmontools/knowndrives.cpp
A smartmontools/atacmds.cpp
A smartmontools/do_release
A smartmontools/cciss.cpp
A smartmontools/examplescripts/README
A smartmontools/examplescripts/Example2
A smartmontools/linux_nvme_ioctl.h
A smartmontools/nvmecmds.h
A smartmontools/getopt
A smartmontools/ChangeLog-6.0-7.0
A smartmontools/smartd.service.in
A smartmontools/smartd.8.in
A smartmontools/scsiata.cpp
A smartmontools/getopt/bits
A smartmontools/regex
A smartmontools/AUTHORS
A smartmontools/os_openbsd.cpp
A smartmontools/os_os2.cpp
A smartmontools/os_linux.h
A smartmontools/os_generic.cpp
A smartmontools/smartctl.h
A smartmontools/os_qnxnto.cpp
A smartmontools/smartd_warning.sh.in
A smartmontools/ataprint.h
A smartmontools/autogen.sh
A smartmontools/os_qnxnto.h
A smartmontools/cciss.h
A smartmontools/os_darwin
A smartmontools/os_darwin/pkg
A smartmontools/os_darwin/pkg/installer
A smartmontools/os_darwin.cpp
A smartmontools/ataidentify.h
A smartmontools/atacmdnames.h
A smartmontools/os_solaris.cpp
A smartmontools/os_darwin/pkg/root
A smartmontools/os_darwin/pkg/root/usr
A smartmontools/os_darwin/pkg/root/usr/local
A smartmontools/os_darwin/pkg/root/usr/local/sbin
A smartmontools/megaraid.h
A smartmontools/dev_ata_cmd_set.h
A smartmontools/dev_areca.h
A smartmontools/aacraid.h
A smartmontools/os_darwin.h
A smartmontools/knowndrives.h
A smartmontools/os_openbsd.h
A smartmontools/ataidentify.cpp
A smartmontools/os_generic.h
A smartmontools/dev_areca.cpp
A smartmontools/os_solaris.h
A smartmontools/scsiprint.h
A smartmontools/dev_ata_cmd_set.cpp
A smartmontools/dev_legacy.cpp
A smartmontools/nvmeprint.h
A smartmontools/smartd.initd.in
A smartmontools/os_freebsd.h
A smartmontools/getopt/getopt.h
A smartmontools/os_netbsd.h
A smartmontools/getopt/bits/getopt_core.h
A smartmontools/os_os2.h
A smartmontools/getopt/getopt_int.h
A smartmontools/os_solaris_ata.s
A smartmontools/smartd.cygwin.initd.in
A smartmontools/regex/regex.c
A smartmontools/regex/regex_internal.h
A smartmontools/getopt/getopt1.c
A smartmontools/getopt/getopt.c
A smartmontools/regex/regexec.c
A smartmontools/getopt/bits/getopt_ext.h
A smartmontools/freebsd_nvme_ioctl.h
A smartmontools/regex/regex.h
A smartmontools/sg_unaligned.h
A smartmontools/regex/regcomp.c
A smartmontools/regex/regex_internal.c
A smartmontools/os_darwin/com.smartmontools.smartd.plist.in
A smartmontools/.editorconfig
A smartmontools/os_darwin/pkg/installer/README.html
A smartmontools/netbsd_nvme_ioctl.h
A smartmontools/os_darwin/pkg/PackageInfo.in
A smartmontools/os_darwin/pkg/root/usr/local/sbin/smart-pkg-uninstall
A smartmontools/os_darwin/pkg/Distribution.in
A smartmontools/smartd.conf
A smartmontools/TODO
A smartmontools/smartd.freebsd.initd.in
A smartmontools/COPYING
A smartmontools/csmisas.h
A smartmontools/ChangeLog-5.0-6.0
A smartmontools/cissio_freebsd.h
A smartmontools/Doxyfile
U smartmontools
Révision 5050 extraite.
jarodd@ubuntu:/var/www$ cd smartmontools
jarodd@ubuntu:/var/www/smartmontools$ ./autogen.sh
aclocal-1.15: installing 'm4/pkg.m4' from '/usr/share/aclocal/pkg.m4'
configure.ac:30: installing './compile'
configure.ac:44: installing './config.guess'
configure.ac:44: installing './config.sub'
configure.ac:7: installing './install-sh'
configure.ac:7: installing './missing'
Makefile.am: installing './depcomp'
jarodd@ubuntu:/var/www/smartmontools$ mkdir res
jarodd@ubuntu:/var/www/smartmontools$ ./configure --prefix=$HOME/smartmontools/res
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking dependency style of gcc... gcc3
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for nm... nm
checking whether this is a build from SVN... yes
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking linux/compiler.h usability... no
checking linux/compiler.h presence... no
checking for linux/compiler.h... no
checking for linux/cciss_ioctl.h... yes
checking for __int128... yes
checking for long double with more range or precision than double... yes
checking for getopt_long... yes
checking for clock_gettime... yes
checking for ftime... yes
checking for gettimeofday... yes
checking whether byte ordering is bigendian... no
checking whether g++ supports __attribute__((packed))... yes
checking cap-ng.h usability... no
checking cap-ng.h presence... no
checking for cap-ng.h... no
checking systemd/sd-daemon.h usability... no
checking systemd/sd-daemon.h presence... no
checking for systemd/sd-daemon.h... no
checking for sigaction... yes
checking for g++ option to accept C++11... none needed
checking for regcomp... yes
checking whether os_linux.cpp uses new interface... yes
checking whether NVMe device scanning could be safely enabled... yes
checking whether g++ supports -Wformat=2... yes
checking whether g++ supports -fstack-protector-strong... yes
checking whether _FORTIFY_SOURCE is predefined... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
checking whether make sets $(MAKE)... (cached) yes
configure:
-----------------------------------------------------------------------------
smartmontools-7.2 configuration:
host operating system: x86_64-pc-linux-gnu
C++ compiler: g++
C compiler: gcc
preprocessor flags:
C++ compiler flags: -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong
C compiler flags: -g -O2
linker flags:
OS specific modules: os_linux.o cciss.o dev_areca.o
binary install path: /home/jarodd/smartmontools/res/sbin
man page install path: /home/jarodd/smartmontools/res/share/man
doc file install path: /home/jarodd/smartmontools/res/share/doc/smartmontools
examples install path: /home/jarodd/smartmontools/res/share/doc/smartmontools/examplescripts
drive database file: /home/jarodd/smartmontools/res/share/smartmontools/drivedb.h
database update script: /home/jarodd/smartmontools/res/sbin/update-smart-drivedb
database update branch: branches/RELEASE_7_0_DRIVEDB
download tools: curl wget lynx svn
GnuPG for verification: gpg
local drive database: /home/jarodd/smartmontools/res/etc/smart_drivedb.h
smartd config file: /home/jarodd/smartmontools/res/etc/smartd.conf
smartd warning script: /home/jarodd/smartmontools/res/etc/smartd_warning.sh
smartd plugin path: /home/jarodd/smartmontools/res/etc/smartd_warning.d
PATH within scripts: /usr/local/bin:/usr/bin:/bin
smartd initd script: [disabled]
smartd save files: [disabled]
smartd attribute logs: [disabled]
SELinux support: no
libcap-ng support: no
systemd notify support: no
NVMe DEVICESCAN: yes
-----------------------------------------------------------------------------
configure: WARNING:
The default for the inclusion of NVME devices in smartd.conf
'DEVICESCAN' and 'smartctl --scan' has been changed to 'yes' on
this platform. If '--without-nvme-devicescan' is still needed,
please inform smartmontools-support@listi.jpberlin.de.
Use option '--with-nvme-devicescan' to suppress this warning.
configure: WARNING:
systemd(1) is used on this system but smartd systemd notify support will
not be available because libsystemd-dev[el] package is not installed.
Use option '--without-libsystemd' to suppress this warning.
jarodd@ubuntu:/var/www/smartmontools$ make
make all-am
make[1] : on entre dans le répertoire « /var/www/smartmontools »
svn info | $(VERSION_FROM_SVN_INFO) > svnversion.h
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT smartctl.o -MD -MP -MF .deps/smartctl.Tpo -c -o smartctl.o smartctl.cpp
mv -f .deps/smartctl.Tpo .deps/smartctl.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT atacmdnames.o -MD -MP -MF .deps/atacmdnames.Tpo -c -o atacmdnames.o atacmdnames.cpp
mv -f .deps/atacmdnames.Tpo .deps/atacmdnames.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT atacmds.o -MD -MP -MF .deps/atacmds.Tpo -c -o atacmds.o atacmds.cpp
mv -f .deps/atacmds.Tpo .deps/atacmds.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT ataidentify.o -MD -MP -MF .deps/ataidentify.Tpo -c -o ataidentify.o ataidentify.cpp
mv -f .deps/ataidentify.Tpo .deps/ataidentify.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT ataprint.o -MD -MP -MF .deps/ataprint.Tpo -c -o ataprint.o ataprint.cpp
mv -f .deps/ataprint.Tpo .deps/ataprint.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT dev_ata_cmd_set.o -MD -MP -MF .deps/dev_ata_cmd_set.Tpo -c -o dev_ata_cmd_set.o dev_ata_cmd_set.cpp
mv -f .deps/dev_ata_cmd_set.Tpo .deps/dev_ata_cmd_set.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT dev_intelliprop.o -MD -MP -MF .deps/dev_intelliprop.Tpo -c -o dev_intelliprop.o dev_intelliprop.cpp
mv -f .deps/dev_intelliprop.Tpo .deps/dev_intelliprop.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT dev_interface.o -MD -MP -MF .deps/dev_interface.Tpo -c -o dev_interface.o dev_interface.cpp
mv -f .deps/dev_interface.Tpo .deps/dev_interface.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT dev_jmb39x_raid.o -MD -MP -MF .deps/dev_jmb39x_raid.Tpo -c -o dev_jmb39x_raid.o dev_jmb39x_raid.cpp
mv -f .deps/dev_jmb39x_raid.Tpo .deps/dev_jmb39x_raid.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT json.o -MD -MP -MF .deps/json.Tpo -c -o json.o json.cpp
mv -f .deps/json.Tpo .deps/json.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT knowndrives.o -MD -MP -MF .deps/knowndrives.Tpo -c -o knowndrives.o knowndrives.cpp
mv -f .deps/knowndrives.Tpo .deps/knowndrives.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT nvmecmds.o -MD -MP -MF .deps/nvmecmds.Tpo -c -o nvmecmds.o nvmecmds.cpp
mv -f .deps/nvmecmds.Tpo .deps/nvmecmds.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT nvmeprint.o -MD -MP -MF .deps/nvmeprint.Tpo -c -o nvmeprint.o nvmeprint.cpp
mv -f .deps/nvmeprint.Tpo .deps/nvmeprint.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT scsicmds.o -MD -MP -MF .deps/scsicmds.Tpo -c -o scsicmds.o scsicmds.cpp
mv -f .deps/scsicmds.Tpo .deps/scsicmds.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT scsiata.o -MD -MP -MF .deps/scsiata.Tpo -c -o scsiata.o scsiata.cpp
mv -f .deps/scsiata.Tpo .deps/scsiata.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT scsinvme.o -MD -MP -MF .deps/scsinvme.Tpo -c -o scsinvme.o scsinvme.cpp
mv -f .deps/scsinvme.Tpo .deps/scsinvme.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT scsiprint.o -MD -MP -MF .deps/scsiprint.Tpo -c -o scsiprint.o scsiprint.cpp
mv -f .deps/scsiprint.Tpo .deps/scsiprint.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT utility.o -MD -MP -MF .deps/utility.Tpo -c -o utility.o utility.cpp
mv -f .deps/utility.Tpo .deps/utility.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT os_linux.o -MD -MP -MF .deps/os_linux.Tpo -c -o os_linux.o os_linux.cpp
mv -f .deps/os_linux.Tpo .deps/os_linux.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT cciss.o -MD -MP -MF .deps/cciss.Tpo -c -o cciss.o cciss.cpp
mv -f .deps/cciss.Tpo .deps/cciss.Po
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT dev_areca.o -MD -MP -MF .deps/dev_areca.Tpo -c -o dev_areca.o dev_areca.cpp
mv -f .deps/dev_areca.Tpo .deps/dev_areca.Po
g++ -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -o smartctl smartctl.o atacmdnames.o atacmds.o ataidentify.o ataprint.o dev_ata_cmd_set.o dev_intelliprop.o dev_interface.o dev_jmb39x_raid.o json.o knowndrives.o nvmecmds.o nvmeprint.o scsicmds.o scsiata.o scsinvme.o scsiprint.o utility.o os_linux.o cciss.o dev_areca.o
g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/home/jarodd/smartmontools/res/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/home/jarodd/smartmontools/res/share/smartmontools"' -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -MT smartd.o -MD -MP -MF .deps/smartd.Tpo -c -o smartd.o smartd.cpp
mv -f .deps/smartd.Tpo .deps/smartd.Po
g++ -g -O2 -Wall -W -Wformat=2 -fstack-protector-strong -o smartd smartd.o atacmdnames.o atacmds.o dev_ata_cmd_set.o dev_intelliprop.o dev_interface.o dev_jmb39x_raid.o knowndrives.o nvmecmds.o scsicmds.o scsiata.o scsinvme.o utility.o os_linux.o cciss.o dev_areca.o
/bin/bash ./config.status --file=update-smart-drivedb
config.status: creating update-smart-drivedb
chmod +x update-smart-drivedb
/bin/bash ./config.status --file=smartd_warning.sh
config.status: creating smartd_warning.sh
chmod +x smartd_warning.sh
$(MAN_FILTER) < ./smartd.conf.5.in > smartd.conf.5
$(MAN_FILTER) < ./smartctl.8.in > smartctl.8
$(MAN_FILTER) < ./smartd.8.in > smartd.8
$(MAN_FILTER) < ./update-smart-drivedb.8.in > update-smart-drivedb.8
make[1] : on quitte le répertoire « /var/www/smartmontools »
jarodd@ubuntu:/var/www/smartmontools$ make install
make[1] : on entre dans le répertoire « /var/www/smartmontools »
/bin/mkdir -p '/home/jarodd/smartmontools/res/sbin'
/usr/bin/install -c smartctl smartd '/home/jarodd/smartmontools/res/sbin'
/bin/mkdir -p '/home/jarodd/smartmontools/res/sbin'
/usr/bin/install -c update-smart-drivedb '/home/jarodd/smartmontools/res/sbin'
/bin/mkdir -p '/home/jarodd/smartmontools/res/etc'
/usr/bin/install -c -m 644 './smartd.conf' '/home/jarodd/smartmontools/res/etc/smartd.conf'
/bin/mkdir -p '/home/jarodd/smartmontools/res/etc/smartd_warning.d'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/doc/smartmontools'
/usr/bin/install -c -m 644 AUTHORS ChangeLog ChangeLog-6.0-7.0 COPYING INSTALL NEWS README TODO smartd.conf '/home/jarodd/smartmontools/res/share/doc/smartmontools'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/smartmontools'
/usr/bin/install -c -m 644 drivedb.h '/home/jarodd/smartmontools/res/share/smartmontools'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/doc/smartmontools/examplescripts'
/usr/bin/install -c -m 644 examplescripts/README '/home/jarodd/smartmontools/res/share/doc/smartmontools/examplescripts'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/doc/smartmontools/examplescripts'
/usr/bin/install -c examplescripts/Example1 examplescripts/Example2 examplescripts/Example3 examplescripts/Example4 examplescripts/Example5 examplescripts/Example6 examplescripts/Example7 examplescripts/Example8 '/home/jarodd/smartmontools/res/share/doc/smartmontools/examplescripts'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/man/man5'
/usr/bin/install -c -m 644 smartd.conf.5 '/home/jarodd/smartmontools/res/share/man/man5'
/bin/mkdir -p '/home/jarodd/smartmontools/res/share/man/man8'
/usr/bin/install -c -m 644 smartctl.8 smartd.8 update-smart-drivedb.8 '/home/jarodd/smartmontools/res/share/man/man8'
/bin/mkdir -p '/home/jarodd/smartmontools/res/etc'
/usr/bin/install -c smartd_warning.sh '/home/jarodd/smartmontools/res/etc'
make[1] : on quitte le répertoire « /var/www/smartmontools »
jarodd@ubuntu:/var/www/smartmontools$
jarodd@ubuntu:/var/www/smartmontools$ ll res/
total 8
drwxrwxr-x 2 jarodd jarodd 4096 avril 21 13:31 ./
drwxrwxr-x 12 jarodd jarodd 4096 avril 21 13:31 ../
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#20 Le 21/04/2020, à 14:01
- moko138
Re : Nemo - Restaurer le copier coller
Merci d'intervenir !
Les cas de Jarodd et de palikey sont différents, puisque palikey partait de la version 6.2, alors que Jarodd a déjà la 6.6 et que le support de nvme commence à 6.5... en principe.
En revanche, passer à la dernière version de smartctl ne peut faire que du bien pour le support général, et celui des interfaces en particulier.
Et justement, dans leurs deux fils on trouve :
Read Device Identity failed: scsi error unsupported field in scsi command
Et en retournant sur https://www.smartmontools.org/wiki/Supp … SB-Devices, je me rends compte - que deux des trois lignes relatives à l'interface 0x0bc2:0x231a, contiennent une note
- et que je n'ai pas encore demandé à Jarodd le retour de
lsusb | sort ; echo ; lsusb -t
.
...À montrer en plus de ce que conseille Naziel.
Donc montre aussi :
ls -l ~/smartmontools/res/sbin
et
ls -la ~/smartmontools/res
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 21/04/2020, à 14:07
- moko138
Re : Nemo - Restaurer le copier coller
Comme, plus haut, on lit bien :
jarodd@ubuntu:/var/www/smartmontools$ make install make[1] : on entre dans le répertoire « /var/www/smartmontools » /bin/mkdir -p '/home/jarodd/smartmontools/res/sbin' /usr/bin/install -c smartctl smartd '/home/jarodd/smartmontools/res/sbin' /bin/mkdir -p '/home/jarodd/smartmontools/res/sbin'
Je crois que
cd ~/smartmontools/res/sbin
puis
sudo ./smartctl -a /dev/disk/by-id/nvme-KINGSTON_RBUSNS8154P3256GJ_50026B7682201961
suffiront.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 21/04/2020, à 14:36
- Jarodd
Re : Nemo - Restaurer le copier coller
J'essaye de suivre mais je ne sais pas trop ce que je fais...
Voici les commandes demandées, dans l'ordre.
jarodd@ubuntu:~$ lsusb | sort ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 045b:0209 Hitachi, Ltd
Bus 001 Device 003: ID 1038:1124 SteelSeries ApS
Bus 001 Device 004: ID 045b:0209 Hitachi, Ltd
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 007: ID 1038:1122 SteelSeries ApS
Bus 001 Device 008: ID 5986:1140 Acer, Inc
Bus 001 Device 009: ID 8087:0aaa Intel Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd
Bus 002 Device 003: ID 045b:0210 Hitachi, Ltd
Bus 002 Device 004: ID 0bc2:231a Seagate RSS LLC
Bus 002 Device 005: ID 1058:2627 Western Digital Technologies, Inc.
Bus 002 Device 006: ID 0bc2:331a Seagate RSS LLC
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 10000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=uas, 5000M
|__ Port 2: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 3: Dev 6, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 4: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 6: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 6: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 7: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
|__ Port 9: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 9: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 13: Dev 8, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 13: Dev 8, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 14: Dev 9, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 14: Dev 9, If 1, Class=Wireless, Driver=btusb, 12M
jarodd@ubuntu:~$
jarodd@ubuntu:~$ ls -l ~/smartmontools/res/sbin
total 6676
-rwxr-xr-x 1 jarodd jarodd 3804752 avril 21 13:33 smartctl
-rwxr-xr-x 1 jarodd jarodd 3014120 avril 21 13:33 smartd
-rwxr-xr-x 1 jarodd jarodd 14828 avril 21 13:33 update-smart-drivedb
jarodd@ubuntu:~$
jarodd@ubuntu:~$ ls -la ~/smartmontools/res
total 20
drwxrwxr-x 5 jarodd jarodd 4096 avril 21 13:32 .
drwxrwxr-x 3 jarodd jarodd 4096 avril 21 13:32 ..
drwxrwxr-x 3 jarodd jarodd 4096 avril 21 13:33 etc
drwxrwxr-x 2 jarodd jarodd 4096 avril 21 13:33 sbin
drwxrwxr-x 5 jarodd jarodd 4096 avril 21 13:32 share
jarodd@ubuntu:~$
jarodd@ubuntu:~$ cd ~/smartmontools/res/sbin
jarodd@ubuntu:~/smartmontools/res/sbin$ sudo ./smartctl -a /dev/disk/by-id/nvme-KINGSTON_RBUSNS8154P3256GJ_50026B7682201961
[sudo] Mot de passe de jarodd :
smartctl 7.2 2020-04-05 r5050 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON RBUSNS8154P3256GJ
Serial Number: 50026B7682201961
Firmware Version: E8FK11.C
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0xb72600
Total NVM Capacity: 256060514304 [256 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 256060514304 [256 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 6822019615
Local Time is: Tue Apr 21 14:34:36 2020 CEST
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0007): Security Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.90W 0.0790W - 0 0 0 0 600 600
1 + 7.90W 0.0790W - 0 0 0 0 600 600
2 + 7.90W 0.0790W - 0 0 0 0 600 600
3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000
4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 44 Celsius
Available Spare: 100%
Available Spare Threshold: 100%
Percentage Used: 16%
Data Units Read: 35224017 [18,0 TB]
Data Units Written: 40595376 [20,7 TB]
Host Read Commands: 272741646
Host Write Commands: 393204037
Controller Busy Time: 1802
Power Cycles: 530
Power On Hours: 840
Unsafe Shutdowns: 85
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 44 Celsius
Error Information (NVMe Log 0x01, max 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 1 0 0x0014 0x0005 - 8323074 1 -
jarodd@ubuntu:~/smartmontools/res/sbin$
Note : mes 3 disques de sauvegarde sont allumées en ce moment (je ne sais pas si cela a une importance).
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#23 Le 21/04/2020, à 17:35
- moko138
Re : Nemo - Restaurer le copier coller
Bravo les gars !
Pour le nvme, reste à interpréter le retour.
Et il est tellement inhabituel (pour moi) que j'ai dû mal..
Et pour le Seagate "usb-Seagate_Expansion_NAAEK0SJ-0:0"
Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd
Bus 002 Device 003: ID 045b:0210 Hitachi, Ltd
Bus 002 Device 004: ID 0bc2:231a Seagate RSS LLC/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 10000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=uas, 5000M
Les hubs intermédiaires : mauvais plan.
Le driver uas sera à désactiver momentanément pour accéder aux données SMART.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#24 Le 21/04/2020, à 18:02
- Jarodd
Re : Nemo - Restaurer le copier coller
Qu'est-ce que le driver uas ?
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#25 Le 21/04/2020, à 18:10
- Nuliel
Re : Nemo - Restaurer le copier coller
Le driver uas, c'est ce qui permet de transmettre des commandes scsi à travers de l'usb, et ça peut poser (pas toujours) des difficultés d'accès au rapport smart
Pour connaître l'état d'usure du nvme, je dirais qu'il faut se référer aux documents du fabriquant, comme pour les disques, mais je ne trouve pas.
Sinon les commandes que j'ai proposé ont permis de compiler la dernière version de smartctl.
Dernière modification par Nuliel (Le 21/04/2020, à 18:11)
Hors ligne