#1 Le 25/02/2020, à 15:10
- zigroful1
18.04 Synaptic message erreur systématique
Je travaille sur Ubuntu 18.04 LTS.
Depuis un certain temps, lorsque je veux installer un logiciel, j'utilise synaptic.
J'ai systématiquement le message d'erreur suivant:
" La cible Packages (restricted/binary-amd64/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible Packages (restricted/binary-i386/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible Packages (restricted/binary-all/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible Translations (restricted/i18n/Translation-fr_FR) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible Translations (restricted/i18n/Translation-fr) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible Translations (restricted/i18n/Translation-en) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible DEP-11 (restricted/dep11/Components-amd64.yml) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible DEP-11 (restricted/dep11/Components-all.yml) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible DEP-11-icons-small (restricted/dep11/icons-48x48.tar) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible DEP-11-icons (restricted/dep11/icons-64x64.tar) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible CNF (restricted/cnf/Commands-amd64) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46La cible CNF (restricted/cnf/Commands-all) est spécifiée plusieurs fois dans /etc/apt/sources.list:5 et /etc/apt/sources.list:46Le dépôt [url]http://archive.canonical.com/ubuntu[/url] vivid Release ne contient plus de fichier Release.Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défautVoir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.La cible Packages (restricted/binary-amd64/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible Packages (restricted/binary-i386/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible Packages (restricted/binary-all/Packages) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible Translations (restricted/i18n/Translation-fr_FR) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible Translations (restricted/i18n/Translation-fr) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible Translations (restricted/i18n/Translation-en) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible DEP-11 (restricted/dep11/Components-amd64.yml) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible DEP-11 (restricted/dep11/Components-all.yml) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible DEP-11-icons-small (restricted/dep11/icons-48x48.tar) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible DEP-11-icons (restricted/dep11/icons-64x64.tar) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible CNF (restricted/cnf/Commands-amd64) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48La cible CNF (restricted/cnf/Commands-all) est spécifiée plusieurs fois dans /etc/apt/sources.list:33 et /etc/apt/sources.list:48Erreur de GPG : [url]http://download.ebz.epson.net/dsc/op/stable/debian[/url] lsb3.2 Release : Les signatures suivantes ne sont pas valables : E5220FB7014D0FBDA50DFC2BE5E86C008AA65D56Le dépôt [url]http://download.ebz.epson.net/dsc/op/stable/debian[/url] lsb3.2 Release n'est pas signé."
Je ne vois pas à quoi cela correspond. Quelqu'un pourrait-il me donner un tuyau ?
Dernière modification par zigroful1 (Le 29/02/2020, à 12:32)
Hors ligne
#2 Le 25/02/2020, à 15:14
- abelthorne
Re : 18.04 Synaptic message erreur systématique
Apparemment, tu as des dépôts déclarés plusieurs fois. Donne le contenu de ton sources.list :
cat /etc/apt/sources.list
EDIT : et tu as un dépôt tiers non signé (tu n'as pas ajouté sa clé). Pour celui-ci, tu peux essayer ça :
sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E5220FB7014D0FBDA50DFC2BE5E86C008AA65D56
Dernière modification par abelthorne (Le 25/02/2020, à 15:16)
Hors ligne
#3 Le 25/02/2020, à 15:15
- xubu1957
Re : 18.04 Synaptic message erreur systématique
Bonjour,
@zigroful1
Tu peux utiliser cette commande :
Bonjour,
Non, le texte que tu as mis d’une traite est tout simplement indigeste.
Lis le premier message de ce fil puis donne les retours de :find /etc/apt -type f -name '*.list*' -exec bash -c 'echo -e "\n$1\n"; [[ $1 = *".list" ]] && nl -ba "$1"' _ '{}' \;
Méthode détaillée :
Bonjour,
Entrer des commandes dans un terminal et donner le résultat - Voilà la marche à suivre :
Ouvre le terminal avec ctrl-alt-t
Sélectionne la commande voulue avec un triple clic (ça sélectionne toute la ligne, même la fin si on ne la voit pas)
Colle-la dans le terminal avec un clic molette, valide avec Entrée
Sélectionne et copie tout ce que te dit le terminal depuis la commande jusqu'à la dernière ligne incluse
Clique sur le <> de l'éditeur de message
Colle là où se trouve le curseur (entre le ] et le [)
EDIT Grillé par abelthorne
Dernière modification par xubu1957 (Le 25/02/2020, à 15:16)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#4 Le 25/02/2020, à 18:54
- zigroful1
Re : 18.04 Synaptic message erreur systématique
Bonjour abelthorn,
Voici le contenu de mon source list:
thomas@thomas-K53SD:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 15.04 _Vivid Vervet_ - Release amd64 (20150422)]/ vivid main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://archive.ubuntu.com/ubuntu bionic main restricted
deb-src http://archive.ubuntu.com/ubuntu bionic main restricted
## Major bug fix updates produced after the final release of the
## distribution.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://archive.ubuntu.com/ubuntu bionic universe
deb-src http://archive.ubuntu.com/ubuntu bionic universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://archive.ubuntu.com/ubuntu bionic multiverse
deb-src http://archive.ubuntu.com/ubuntu bionic multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu bionic-security main restricted
deb-src http://archive.ubuntu.com/ubuntu bionic-security main restricted
deb http://archive.ubuntu.com/ubuntu bionic-security universe
deb-src http://archive.ubuntu.com/ubuntu bionic-security universe
deb http://archive.ubuntu.com/ubuntu bionic-security multiverse
deb-src http://archive.ubuntu.com/ubuntu bionic-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu bionic partner
deb-src http://archive.canonical.com/ubuntu vivid partner
deb http://archive.ubuntu.com/ubuntu bionic restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://archive.ubuntu.com/ubuntu bionic-security restricted
deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://archive.ubuntu.com/ubuntu bionic-updates multiverse restricted universe main
deb http://download.ebz.epson.net/dsc/op/stable/debian/ lsb3.2 main
et voici le résultat de la deuxième commande:
thomas@thomas-K53SD:~$ sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E5220FB7014D0FBDA50DFC2BE5E86C008AA65D56
[sudo] Mot de passe de thomas :
Executing: /tmp/apt-key-gpghome.fAnyUQgMM2/gpg.1.sh --recv-keys --keyserver keyserver.ubuntu.com E5220FB7014D0FBDA50DFC2BE5E86C008AA65D56
gpg: clef E5E86C008AA65D56 : « Seiko Epson Corporation (Epson Inkjet Printer Driver) <epson-linux-inkjet@avasys.jp> » n'est pas modifiée
gpg: Quantité totale traitée : 1
gpg: non modifiées : 1
Que peut-on en conclure ?
Et en réponse à Xubu1957, voici ce que j'obtiens:
thomas@thomas-K53SD:~$ find /etc/apt -type f -name '*.list*' -exec bash -c 'echo -e "\n$1\n"; [[ $1 = *".list" ]] && nl -ba "$1"' _ '{}' \;
/etc/apt/sources.list.distUpgrade
/etc/apt/sources.list.save
/etc/apt/sources.list
1 # deb cdrom:[Ubuntu 15.04 _Vivid Vervet_ - Release amd64 (20150422)]/ vivid main restricted
2
3 # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
4 # newer versions of the distribution.
5 deb http://archive.ubuntu.com/ubuntu bionic main restricted
6 deb-src http://archive.ubuntu.com/ubuntu bionic main restricted
7
8 ## Major bug fix updates produced after the final release of the
9 ## distribution.
10
11 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
12 ## team. Also, please note that software in universe WILL NOT receive any
13 ## review or updates from the Ubuntu security team.
14 deb http://archive.ubuntu.com/ubuntu bionic universe
15 deb-src http://archive.ubuntu.com/ubuntu bionic universe
16
17 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
18 ## team, and may not be under a free licence. Please satisfy yourself as to
19 ## your rights to use the software. Also, please note that software in
20 ## multiverse WILL NOT receive any review or updates from the Ubuntu
21 ## security team.
22 deb http://archive.ubuntu.com/ubuntu bionic multiverse
23 deb-src http://archive.ubuntu.com/ubuntu bionic multiverse
24
25 ## N.B. software from this repository may not have been tested as
26 ## extensively as that contained in the main release, although it includes
27 ## newer versions of some applications which may provide useful features.
28 ## Also, please note that software in backports WILL NOT receive any review
29 ## or updates from the Ubuntu security team.
30 deb http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
31 deb-src http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
32
33 deb http://archive.ubuntu.com/ubuntu bionic-security main restricted
34 deb-src http://archive.ubuntu.com/ubuntu bionic-security main restricted
35 deb http://archive.ubuntu.com/ubuntu bionic-security universe
36 deb-src http://archive.ubuntu.com/ubuntu bionic-security universe
37 deb http://archive.ubuntu.com/ubuntu bionic-security multiverse
38 deb-src http://archive.ubuntu.com/ubuntu bionic-security multiverse
39
40 ## Uncomment the following two lines to add software from Canonical's
41 ## 'partner' repository.
42 ## This software is not part of Ubuntu, but is offered by Canonical and the
43 ## respective vendors as a service to Ubuntu users.
44 deb http://archive.canonical.com/ubuntu bionic partner
45 deb-src http://archive.canonical.com/ubuntu vivid partner
46 deb http://archive.ubuntu.com/ubuntu bionic restricted
47 deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
48 deb http://archive.ubuntu.com/ubuntu bionic-security restricted
49 deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
50 deb http://archive.ubuntu.com/ubuntu bionic-updates multiverse restricted universe main
51 deb http://download.ebz.epson.net/dsc/op/stable/debian/ lsb3.2 main
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list
1 # deb http://ppa.launchpad.net/aims/sagemath/ubuntu bionic main # désactivé pour la mise à niveau vers bionic
/etc/apt/sources.list.d/etcher.list.save
/etc/apt/sources.list.d/etcher.list.distUpgrade
/etc/apt/sources.list.d/skype-stable.list
1 deb [arch=amd64] https://repo.skype.com/deb stable main
/etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-bionic.list
1 deb http://ppa.launchpad.net/tails-team/tai … ler/ubuntu bionic main
2 # deb-src http://ppa.launchpad.net/tails-team/tai … ler/ubuntu bionic main
/etc/apt/sources.list.d/etcher.list
1 deb https://dl.bintray.com/resin-io/debian stable etcher
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list.save
/etc/apt/sources.list.d/geogebra.list.save
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list.distUpgrade
/etc/apt/sources.list.d/skype-stable.list.save
/etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-bionic.list.save
/etc/apt/sources.list.d/skype-stable.list.distUpgrade
/etc/apt/sources.list.d/geogebra.list
1 ### THIS FILE IS AUTOMATICALLY CONFIGURED ###
2 # You may comment out this entry, but any other modifications may be lost.
3 deb http://www.geogebra.net/linux/ stable main
Qu'en conclure ?
Merci de me répondre
Hors ligne
#5 Le 25/02/2020, à 19:11
- michel_04
Re : 18.04 Synaptic message erreur systématique
Bonjour.
cqfd93 a écrit :Bonjour,
Entrer des commandes dans un terminal et donner le résultat - Voilà la marche à suivre :
Ouvre le terminal avec ctrl-alt-t
Sélectionne la commande voulue avec un triple clic (ça sélectionne toute la ligne, même la fin si on ne la voit pas)
Colle-la dans le terminal avec un clic molette, valide avec Entrée
Sélectionne et copie tout ce que te dit le terminal depuis la commande jusqu'à la dernière ligne incluse
Clique sur le <> de l'éditeur de message
Colle là où se trouve le curseur (entre le ] et le [)
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#6 Le 25/02/2020, à 19:30
- abelthorne
Re : 18.04 Synaptic message erreur systématique
Voici le contenu de mon source list:
Ah oui, c'est un sacré merdier : il y a effectivement des dépôts déclarés plusieurs fois mais aussi des vieux dépôts Partner d'anciennes versions.
Ouvre le fichier en admin (en remplaçant gedit par le bon éditeur de texte si tu en utilises un autre) :
sudo gedit /etc/apt/sources.list
et remplace tout son contenu par ça :
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic universe
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu bionic partner
deb-src http://archive.canonical.com/ubuntu bionic partner
deb http://security.ubuntu.com/ubuntu bionic-security main restricted
deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted
deb http://security.ubuntu.com/ubuntu bionic-security universe
deb-src http://security.ubuntu.com/ubuntu bionic-security universe
deb http://security.ubuntu.com/ubuntu bionic-security multiverse
deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse
deb http://download.ebz.epson.net/dsc/op/stable/debian/ lsb3.2 main
Enregistre, recharge les sources avec sudo apt-get update et dis-moi si tu as encore des erreurs.
Hors ligne
#7 Le 25/02/2020, à 20:18
- xubu1957
Re : 18.04 Synaptic message erreur systématique
Pour ajouter toi-même les balises code à ton précédent message #4 :
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
Voir règles du forum > balises BB code
Balise CODE :
C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#8 Le 27/02/2020, à 20:06
- zigroful1
Re : 18.04 Synaptic message erreur systématique
thomas@thomas-K53SD:~$ sudo apt-get update
[sudo] Mot de passe de thomas :
Atteint :1 http://fr.archive.ubuntu.com/ubuntu bionic InRelease
Réception de :2 http://fr.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
Atteint :3 http://archive.canonical.com/ubuntu bionic InRelease
Err :4 http://ppa.launchpad.net/tails-team/tails-installer/ubuntu bionic InRelease
403 Forbidden [IP : 2001:67c:1560:8008::15 80]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Atteint :6 http://www.geogebra.net/linux stable InRelease
Atteint :7 https://repo.skype.com/deb stable InRelease
Ign :8 https://dl.bintray.com/resin-io/debian stable InRelease
Err :9 https://dl.bintray.com/resin-io/debian stable Release
404 Not Found [IP : 52.29.129.139 443]
Réception de :10 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]
Ign :11 http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 InRelease
Réception de :12 http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 Release [217 kB]
Réception de :13 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main Sources [310 kB]
Réception de :14 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe Sources [278 kB]
Réception de :15 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [650 kB]
Réception de :16 http://security.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [38,5 kB]
Réception de :17 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [871 kB]
Réception de :18 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 48x48 Icons [17,6 kB]
Réception de :19 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 64x64 Icons [41,5 kB]
Réception de :20 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [42,1 kB]
Réception de :21 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 48x48 Icons [16,4 kB]
Réception de :22 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 64x64 Icons [111 kB]
Réception de :23 http://security.ubuntu.com/ubuntu bionic-security/multiverse amd64 DEP-11 Metadata [2464 B]
Réception de :24 http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 Release.gpg [198 B]
Réception de :25 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [307 kB]
Ign :24 http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 Release.gpg
Réception de :26 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [73,8 kB]
Réception de :27 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [140 kB]
Réception de :28 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [1010 kB]
Réception de :29 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [1054 kB]
Réception de :30 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [264 kB]
Réception de :31 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [200 kB]
Réception de :32 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [446 kB]
Réception de :33 http://fr.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2468 B]
Réception de :34 http://fr.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [7980 B]
Lecture des listes de paquets... Fait
E: Impossible de récupérer http://ppa.launchpad.net/tails-team/tails-installer/ubuntu/dists/bionic/InRelease 403 Forbidden [IP : 2001:67c:1560:8008::15 80]
E: Le dépôt http://ppa.launchpad.net/tails-team/tails-installer/ubuntu bionic InRelease n'est plus signé
N: Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défaut.
N: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.
E: Le dépôt https://dl.bintray.com/resin-io/debian stable Release n'a pas de fichier Release.
N: Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défaut.
N: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.
W: Erreur de GPG : http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 Release : Les signatures suivantes ne sont pas valables : E5220FB7014D0FBDA50DFC2BE5E86C008AA65D56
E: Le dépôt http://download.ebz.epson.net/dsc/op/stable/debian lsb3.2 Release n'est pas signé.
N: Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défaut.
N: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.
Le problème subsiste en ce qui concerne epson, malgré les recommandations de xubu1957. Comment retrouver le bon GPG ?
Hors ligne
#9 Le 27/02/2020, à 20:10
- zigroful1
Re : 18.04 Synaptic message erreur systématique
Pardon !
J'ai oublié de die bonjour et de m'adresser à abelthorn ou à Xubu1957.
Je suis nouveau dans ce forum et n'en maîtrise pas encore les usages.
Donc.. bonjour et j'ai mis entre balises le code réponse au #8, comme demandé.
Merci de votre patience
Hors ligne
#10 Le 27/02/2020, à 20:14
- moko138
Re : 18.04 Synaptic message erreur systématique
Bonsoir,
S'il te plaît, pourrais-tu modifier tes messages #1 et #4, pour y mettre chaque retour de commande entre balises-code ?
Merci.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 27/02/2020, à 20:19
- zigroful1
Re : 18.04 Synaptic message erreur systématique
thomas@thomas-K53SD:~$ pip install --upgrade pip
Collecting pip
Using cached https://files.pythonhosted.org/packages/54/0c/d01aa759fdc501a58f431eb594a17495f15b88da142ce14b5845662c13f3/pip-20.0.2-py2.py3-none-any.whl
Installing collected packages: pip
Found existing installation: pip 9.0.1
Uninstalling pip-9.0.1:
Successfully uninstalled pip-9.0.1
Rolling back uninstall of pip
Exception:
Traceback (most recent call last):
File "/home/thomas/.local/lib/python2.7/site-packages/pip/basecommand.py", line 215, in main
status = self.run(options, args)
File "/home/thomas/.local/lib/python2.7/site-packages/pip/commands/install.py", line 342, in run
prefix=options.prefix_path,
File "/home/thomas/.local/lib/python2.7/site-packages/pip/req/req_set.py", line 784, in install
**kwargs
File "/home/thomas/.local/lib/python2.7/site-packages/pip/req/req_install.py", line 851, in install
self.move_wheel_files(self.source_dir, root=root, prefix=prefix)
File "/home/thomas/.local/lib/python2.7/site-packages/pip/req/req_install.py", line 1064, in move_wheel_files
isolated=self.isolated,
File "/home/thomas/.local/lib/python2.7/site-packages/pip/wheel.py", line 345, in move_wheel_files
clobber(source, lib_dir, True)
File "/home/thomas/.local/lib/python2.7/site-packages/pip/wheel.py", line 316, in clobber
ensure_dir(destdir)
File "/home/thomas/.local/lib/python2.7/site-packages/pip/utils/__init__.py", line 83, in ensure_dir
os.makedirs(path)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 13] Permission non accordée: '/usr/local/lib/python2.7/dist-packages/pip-20.0.2.dist-info'
You are using pip version 9.0.1, however version 20.0.2 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Et quand je veux upgrader pip il désinstalle l'ancienne version mais n'installe pas la nouvelle !!!?
Hors ligne
#12 Le 27/02/2020, à 20:21
- abelthorne
Re : 18.04 Synaptic message erreur systématique
Tu as plusieurs dépôts tiers qui ne sont pas accessibles :
- PPA Tails Live : qui n'a pas l'air d'exister (soit il a été supprimé, soit il n'y a jamais eu de PPA).
- resin-io : aucune idée de ce que c'est mais en tout cas, le dépôt n'est pas accessible à cette adresse. À noter que c'est un dépôt pour Debian : attention, ils ne sont pas tous utilisables sur Ubuntu (ça dépend des cas). Il y a des chances que ce dépôt n'existe plus.
Toujours l'erreur de clé pour le dépôt Epson. C'est possible qu'elle ait changé à un moment mais la commande précédemment utilisée avait l'air de dire que c'était ok. Dans le doute, tu peux aller dans Logiciels & Mises à jour → onglet Authentification. Essaie de trouver la clé qui correspond à ce dépôt Epson dans la liste et supprime-la. Ferme le soft et réessaie la commande apt-key que j'avais indiquée dans le message #2.
Pour Pip, tu l'as installé comment à la base ? J'ai l'impression qu'il y a à la fois une version locale (dans ton dossier perso) et une au niveau système (dans /usr/local/lib).
Dernière modification par abelthorne (Le 27/02/2020, à 20:25)
Hors ligne
#13 Le 27/02/2020, à 20:29
- zigroful1
Re : 18.04 Synaptic message erreur systématique
thomas@thomas-K53SD:~$ find /etc/apt -type f -name '*.list*' -exec bash -c 'echo -e "\n$1\n"; [[ $1 = *".list" ]] && nl -ba "$1"' _ '{}' \;
/etc/apt/sources.list~
/etc/apt/sources.list.distUpgrade
/etc/apt/sources.list.save
/etc/apt/sources.list
1 # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
2 # newer versions of the distribution.
3 deb http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted
4 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted
5
6 ## Major bug fix updates produced after the final release of the
7 ## distribution.
8 deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
9 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
10
11 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
12 ## team. Also, please note that software in universe WILL NOT receive any
13 ## review or updates from the Ubuntu security team.
14 deb http://fr.archive.ubuntu.com/ubuntu/ bionic universe
15 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic universe
16 deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe
17 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe
18
19 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
20 ## team, and may not be under a free licence. Please satisfy yourself as to
21 ## your rights to use the software. Also, please note that software in
22 ## multiverse WILL NOT receive any review or updates from the Ubuntu
23 ## security team.
24 deb http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse
25 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse
26 deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
27 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
28
29 ## N.B. software from this repository may not have been tested as
30 ## extensively as that contained in the main release, although it includes
31 ## newer versions of some applications which may provide useful features.
32 ## Also, please note that software in backports WILL NOT receive any review
33 ## or updates from the Ubuntu security team.
34 deb http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
35 deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
36
37 ## Uncomment the following two lines to add software from Canonical's
38 ## 'partner' repository.
39 ## This software is not part of Ubuntu, but is offered by Canonical and the
40 ## respective vendors as a service to Ubuntu users.
41 deb http://archive.canonical.com/ubuntu bionic partner
42 deb-src http://archive.canonical.com/ubuntu bionic partner
43
44 deb http://security.ubuntu.com/ubuntu bionic-security main restricted
45 deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted
46 deb http://security.ubuntu.com/ubuntu bionic-security universe
47 deb-src http://security.ubuntu.com/ubuntu bionic-security universe
48 deb http://security.ubuntu.com/ubuntu bionic-security multiverse
49 deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse
50
51 deb http://download.ebz.epson.net/dsc/op/stable/debian/ lsb3.2 main
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list
1 # deb http://ppa.launchpad.net/aims/sagemath/ubuntu bionic main # désactivé pour la mise à niveau vers bionic
/etc/apt/sources.list.d/etcher.list.save
/etc/apt/sources.list.d/etcher.list.distUpgrade
/etc/apt/sources.list.d/skype-stable.list
1 deb [arch=amd64] https://repo.skype.com/deb stable main
/etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-bionic.list
1 deb http://ppa.launchpad.net/tails-team/tails-installer/ubuntu bionic main
2 # deb-src http://ppa.launchpad.net/tails-team/tails-installer/ubuntu bionic main
/etc/apt/sources.list.d/etcher.list
1 deb https://dl.bintray.com/resin-io/debian stable etcher
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list.save
/etc/apt/sources.list.d/geogebra.list.save
/etc/apt/sources.list.d/aims-ubuntu-sagemath-xenial.list.distUpgrade
/etc/apt/sources.list.d/skype-stable.list.save
/etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-bionic.list.save
/etc/apt/sources.list.d/skype-stable.list.distUpgrade
/etc/apt/sources.list.d/geogebra.list
1 ### THIS FILE IS AUTOMATICALLY CONFIGURED ###
2 # You may comment out this entry, but any other modifications may be lost.
3 deb http://www.geogebra.net/linux/ stable main
Voici le #4
Hors ligne
#14 Le 28/02/2020, à 00:09
- abelthorne
Re : 18.04 Synaptic message erreur systématique
(En fait, ils te demandaient d'éditer tes messages #1 et #4 pour rajouter les balises code dedans et qu'ils soient plus lisibles quand on parcourt le sujet complet. )
Hors ligne
#15 Le 28/02/2020, à 19:03
- zigroful1
Re : 18.04 Synaptic message erreur systématique
Bonjour Abelthorn,
J'ai compris, un peu tard, la manip à faire pour rendre lisibles mes messages.
Au sujet de pip, en effet, je le retrouve 3 fois dans mon arborescence.
Une fois sur /usr/bin/ où je trouve 3 fichiers pip, pip2 et pip 3, et une autre fois sur /Dossier Personnel/.local/bin où je trouve également 3 fichiers pip, pip2 et pip2.7
Enfin, une 3ème fois dans /Dossier Personnel/.local/lib/python2.7/site-packages/pip/ où je trouve, cette fois-ci un répertoire pip.
En effet, je ne me souviens plus comment je l'ai installé et je ne sais pas comment supprimer (sans faire de dégat) les pip superflus.
Pourriez-vous me donner quelques indications SVP ?
Hors ligne
#16 Le 28/02/2020, à 19:08
- abelthorne
Re : 18.04 Synaptic message erreur systématique
J'ai compris, un peu tard, la manip à faire pour rendre lisibles mes messages.
Donc, il faudrait le faire. Édite les messages #1 et #4 avec le lien "Modifier" en bas à droite de chacun puis rajoute les balises code où il faut.
Au sujet de pip, en effet, je le retrouve 3 fois dans mon arborescence.
Une fois sur /usr/bin/ où je trouve 3 fichiers pip, pip2 et pip 3, et une autre fois sur /Dossier Personnel/.local/bin où je trouve également 3 fichiers pip, pip2 et pip2.7
Enfin, une 3ème fois dans /Dossier Personnel/.local/lib/python2.7/site-packages/pip/ où je trouve, cette fois-ci un répertoire pip.
En effet, je ne me souviens plus comment je l'ai installé et je ne sais pas comment supprimer (sans faire de dégat) les pip superflus.
Il faudrait vraiment savoir comment tu l'as installé à la base. Il n'est pas dans les dépôts, donc je suppose qu'il y a eu une méthode manuelle à l'origine.
En théorie, j'imagine que supprimer les versions locales puis faire l'update via sudo pour mettre à jour la version système pourrait marcher mais ça pourrait tout aussi bien tout casser...
Dernière modification par abelthorne (Le 28/02/2020, à 19:11)
Hors ligne