Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 22/12/2019, à 22:58

Arthur138

Pas de son sur N14A avec Ubuntu 18.04

Bonsoir,

Je me permets de vous contacter car malgré mes longues recherches et tentatives sur ce forum, je n'ai pas réussi à régler mon problème (plus de son sur mon ordinateur, un Thomson N14A, après avoir installé Ubuntu 18.04).

Voici mon matériel :

fatal@fatal-N14A-2WH32MSL:~$ lspci
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0f)
00:15.0 Multimedia audio controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series LPE Audio Controller (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx /Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)
fatal@fatal-N14A-2WH32MSL:~$

Voici ce que me donne la commande "alsamixer" :

1577050781.png

Voici ce que me donne la commande "pavucontrol" :

1577050877.png

fatal@fatal-N14A-2WH32MSL:~$ pavucontrol

(pavucontrol:2298): Gtk-WARNING **: 21:54:27.091: Failed to set text 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display' from markup due to error parsing markup: Erreur à la ligne 1 : L’entité ne se termine pas par un point-virgule ; vous avez probablement utilisé une esperluette sans intention d’écrire une entité — échappez l’esperluette avec &

Je ne sais pas si tout cela vous sera utile (je suis un novice), dites-moi s'il faut que je vous donne le retour d'autres commandes. Merci d'avance pour votre aide, en tout cas ! Bonne soirée smile


Sur Toile Libre, choisir le lien « Insérer la miniature dans un forum : » 1469894479.png

Dernière modification par cqfd93 (Le 23/12/2019, à 08:27)

Hors ligne

#2 Le 22/12/2019, à 23:07

xubu1957

Re : Pas de son sur N14A avec Ubuntu 18.04

Bonjour,

Montre, en te servant du Retour utilisable de commande :

lsmod | grep snd

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 22/12/2019, à 23:18

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Cela me donne ça :

fatal@fatal-N14A-2WH32MSL:~$ lsmod | grep snd
snd_hdmi_lpe_audio     28672  1
snd_soc_es8316         40960  0
snd_soc_core          233472  1 snd_soc_es8316
snd_compress           24576  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_seq_midi           20480  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_pcm               102400  4 snd_hdmi_lpe_audio,snd_soc_core,snd_soc_es8316,snd_pcm_dmaengine
snd_rawmidi            36864  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              36864  2 snd_seq,snd_pcm
snd                    86016  10 snd_seq,snd_seq_device,snd_timer,snd_compress,snd_hdmi_lpe_audio,snd_soc_core,snd_pcm,snd_rawmidi
soundcore              16384  1 snd
fatal@fatal-N14A-2WH32MSL:~$ 

Hors ligne

#4 Le 22/12/2019, à 23:29

xubu1957

Re : Pas de son sur N14A avec Ubuntu 18.04

On va essayer :

Le 30/04/2019, Naziel a écrit :

Oui, ce genre de pc devrait être interdit à la vente.

Alors tu peux redémarrer et donner

dmesg

(ça permettra de limiter la quantité d'infos)

Puis tu blacklistes la sortie son HDMI (car reconnue à tort comme carte son) avec

echo "blacklist snd_hdmi_lpe_audio" | sudo tee /etc/modprobe.d/blacklist-hdmi.conf

(utilise le copier coller dans le terminal afin d'éviter les erreurs de copie)
puis tu redémarres et tu redonnes

dmesg

> [ PROBLEME ] Plus de son avec Ubuntu 19.04.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 22/12/2019, à 23:34

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Ouhla j'ai bien redémarré et pourtant voilà ce que j'obtiens :

fatal@fatal-N14A-2WH32MSL:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[    0.000000] Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=b73b91b6-53ce-4876-ad1d-d1a117e8b865 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007721efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007721f000-0x0000000077225fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077226000-0x000000007722efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007722f000-0x00000000772fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077300000-0x000000007b27afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b27b000-0x000000007b49afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b49b000-0x000000007b49bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b49c000-0x000000007b49cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b49d000-0x000000007b49efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b49f000-0x000000007b49ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b4a0000-0x000000007bcc6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bcc7000-0x000000007c5c6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c5c7000-0x000000007c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007ccc6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ccc7000-0x000000007cd1ffff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007cd20000-0x000000007cd47fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cd48000-0x000000007cdb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cdb8000-0x000000007cdf7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cdf8000-0x000000007cdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7cdf7014  ESRT=0x7b27bf10  SMBIOS=0x7b452000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Thomson N14A-2WH32MSL/N14A-2WH32MSL, BIOS W.N116.Thomson.I002 06/04/2019
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000029] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000064] last_pfn = 0x7ce00 max_arch_pfn = 0x400000000
[    0.000072] MTRR default type: uncachable
[    0.000075] MTRR fixed ranges enabled:
[    0.000079]   00000-9FFFF write-back
[    0.000083]   A0000-FFFFF write-protect
[    0.000085] MTRR variable ranges enabled:
[    0.000090]   0 base 0FFD00000 mask FFFC00000 write-protect
[    0.000094]   1 base 000000000 mask F80000000 write-back
[    0.000098]   2 base 07E000000 mask FFE000000 uncachable
[    0.000101]   3 base 07D000000 mask FFF000000 uncachable
[    0.000105]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000109]   5 base 07C800000 mask FFFC00000 uncachable
[    0.000112]   6 disabled
[    0.000114]   7 disabled
[    0.000343] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010444] esrt: Reserving ESRT space from 0x000000007b27bf10 to 0x000000007b27bf48.
[    0.010472] check: Scanning 1 areas for low memory corruption
[    0.010487] BRK [0x52c01000, 0x52c01fff] PGTABLE
[    0.010494] BRK [0x52c02000, 0x52c02fff] PGTABLE
[    0.010498] BRK [0x52c03000, 0x52c03fff] PGTABLE
[    0.010604] BRK [0x52c04000, 0x52c04fff] PGTABLE
[    0.010613] BRK [0x52c05000, 0x52c05fff] PGTABLE
[    0.010689] BRK [0x52c06000, 0x52c06fff] PGTABLE
[    0.011148] BRK [0x52c07000, 0x52c07fff] PGTABLE
[    0.011359] BRK [0x52c08000, 0x52c08fff] PGTABLE
[    0.011596] BRK [0x52c09000, 0x52c09fff] PGTABLE
[    0.011772] BRK [0x52c0a000, 0x52c0afff] PGTABLE
[    0.011827] BRK [0x52c0b000, 0x52c0bfff] PGTABLE
[    0.012034] RAMDISK: [mem 0x33215000-0x35901fff]
[    0.012056] ACPI: Early table checksum verification disabled
[    0.012064] ACPI: RSDP 0x000000007CDF7014 000024 (v02 INSYDE)
[    0.012074] ACPI: XSDT 0x000000007CDD0188 0000CC (v01 INSYDE INSYDE   00000003      01000013)
[    0.012089] ACPI: FACP 0x000000007CDF1000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012105] ACPI: DSDT 0x000000007CDDD000 00E73F (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012117] ACPI: UEFI 0x000000007CDF6000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012128] ACPI: MSDM 0x000000007CDF5000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012139] ACPI: UEFI 0x000000007CDF4000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.012149] ACPI: OEM0 0x000000007CDF3000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012160] ACPI: DBG2 0x000000007CDF2000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012171] ACPI: HPET 0x000000007CDF0000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012182] ACPI: LPIT 0x000000007CDEF000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012192] ACPI: APIC 0x000000007CDEE000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012203] ACPI: MCFG 0x000000007CDED000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012214] ACPI: SLIC 0x000000007CDEC000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012224] ACPI: SSDT 0x000000007CDDC000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.012235] ACPI: SSDT 0x000000007CDD9000 0024A0 (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.012246] ACPI: SSDT 0x000000007CDD8000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.012256] ACPI: SSDT 0x000000007CDD7000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.012267] ACPI: SSDT 0x000000007CDD6000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.012278] ACPI: SSDT 0x000000007CDD5000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.012289] ACPI: SSDT 0x000000007CDD4000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.012299] ACPI: FPDT 0x000000007CDD3000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.012310] ACPI: CSRT 0x000000007CDD2000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.012321] ACPI: BGRT 0x000000007CDD1000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012345] ACPI: Local APIC address 0xfee00000
[    0.012635] No NUMA configuration found
[    0.012639] Faking a node at [mem 0x0000000000000000-0x000000007cdfffff]
[    0.012668] NODE_DATA(0) allocated [mem 0x7cc9c000-0x7ccc6fff]
[    0.013628] Zone ranges:
[    0.013631]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013635]   DMA32    [mem 0x0000000001000000-0x000000007cdfffff]
[    0.013638]   Normal   empty
[    0.013641]   Device   empty
[    0.013644] Movable zone start for each node
[    0.013655] Early memory node ranges
[    0.013658]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.013661]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.013664]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.013666]   node   0: [mem 0x0000000020200000-0x000000007721efff]
[    0.013669]   node   0: [mem 0x0000000077300000-0x000000007b27afff]
[    0.013672]   node   0: [mem 0x000000007b49b000-0x000000007b49bfff]
[    0.013674]   node   0: [mem 0x000000007b49d000-0x000000007b49efff]
[    0.013677]   node   0: [mem 0x000000007b4a0000-0x000000007bcc6fff]
[    0.013679]   node   0: [mem 0x000000007c5c7000-0x000000007c7fffff]
[    0.013682]   node   0: [mem 0x000000007cc00000-0x000000007ccc6fff]
[    0.013684]   node   0: [mem 0x000000007cdf8000-0x000000007cdfffff]
[    0.013989] Zeroed struct page in unavailable ranges: 5016 pages
[    0.013993] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
[    0.013999] On node 0 totalpages: 506472
[    0.014002]   DMA zone: 64 pages used for memmap
[    0.014004]   DMA zone: 22 pages reserved
[    0.014007]   DMA zone: 3996 pages, LIFO batch:0
[    0.014374]   DMA32 zone: 7928 pages used for memmap
[    0.014377]   DMA32 zone: 502476 pages, LIFO batch:63
[    0.058917] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.058929] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[    0.059013] ACPI: Local APIC address 0xfee00000
[    0.059048] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.059055] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.059060] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.059067] Using ACPI (MADT) for SMP configuration information
[    0.059072] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.059101] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.059199] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.059206] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.059213] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.059215] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.059222] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.059229] PM: Registered nosave memory: [mem 0x7721f000-0x77225fff]
[    0.059232] PM: Registered nosave memory: [mem 0x77226000-0x7722efff]
[    0.059234] PM: Registered nosave memory: [mem 0x7722f000-0x772fffff]
[    0.059241] PM: Registered nosave memory: [mem 0x7b27b000-0x7b49afff]
[    0.059248] PM: Registered nosave memory: [mem 0x7b49c000-0x7b49cfff]
[    0.059255] PM: Registered nosave memory: [mem 0x7b49f000-0x7b49ffff]
[    0.059262] PM: Registered nosave memory: [mem 0x7bcc7000-0x7c5c6fff]
[    0.059270] PM: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
[    0.059277] PM: Registered nosave memory: [mem 0x7ccc7000-0x7cd1ffff]
[    0.059280] PM: Registered nosave memory: [mem 0x7cd20000-0x7cd47fff]
[    0.059282] PM: Registered nosave memory: [mem 0x7cd48000-0x7cdb7fff]
[    0.059285] PM: Registered nosave memory: [mem 0x7cdb8000-0x7cdf7fff]
[    0.059290] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.059293] Booting paravirtualized kernel on bare hardware
[    0.059300] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.059327] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.059354] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.060288] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.060317] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.060321] pcpu-alloc: [0] 0 1 2 3 
[    0.060431] Built 1 zonelists, mobility grouping on.  Total pages: 498458
[    0.060435] Policy zone: DMA32
[    0.060440] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=b73b91b6-53ce-4876-ad1d-d1a117e8b865 ro quiet splash vt.handoff=1
[    0.060722] Calgary: detecting Calgary via BIOS EBDA area
[    0.060726] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.078593] Memory: 1891560K/2025888K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 134328K reserved, 0K cma-reserved)
[    0.079134] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.079151] Kernel/User page tables isolation: enabled
[    0.079198] ftrace: allocating 41688 entries in 163 pages
[    0.125180] rcu: Hierarchical RCU implementation.
[    0.125185] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.125187] 	Tasks RCU enabled.
[    0.125190] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.125192] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.136956] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[    0.137080] vt handoff: transparent VT on vt#1
[    0.137096] Console: colour dummy device 80x25
[    0.137105] printk: console [tty0] enabled
[    0.137154] ACPI: Core revision 20181213
[    0.137635] APIC: Switch to symmetric I/O mode setup
[    0.137690] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.137719] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[    0.137726] pid_max: default: 32768 minimum: 301
[    0.141482] LSM: Security Framework initializing
[    0.141520] Yama: becoming mindful.
[    0.141578] AppArmor: AppArmor initialized
[    0.141696] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.141696] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.141696] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.141696] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.141696] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.141696] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.141696] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.141696] process: using mwait in idle threads
[    0.141696] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.141696] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.141696] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.141696] Spectre V2 : Mitigation: Full generic retpoline
[    0.141696] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.141696] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.141696] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.141696] MDS: Mitigation: Clear CPU buffers
[    0.141696] Freeing SMP alternatives memory: 36K
[    0.141696] TSC deadline timer enabled
[    0.141696] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.141696] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.141696] ... version:                3
[    0.141696] ... bit width:              40
[    0.141696] ... generic registers:      2
[    0.141696] ... value mask:             000000ffffffffff
[    0.141696] ... max period:             0000007fffffffff
[    0.141696] ... fixed-purpose events:   3
[    0.141696] ... event mask:             0000000700000003
[    0.141696] rcu: Hierarchical SRCU implementation.
[    0.141696] random: crng done (trusting CPU's manufacturer)
[    0.141696] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.141696] smp: Bringing up secondary CPUs ...
[    0.141696] x86: Booting SMP configuration:
[    0.141696] .... node  #0, CPUs:      #1 #2 #3
[    0.146242] smp: Brought up 1 node, 4 CPUs
[    0.146242] smpboot: Max logical packages: 1
[    0.146242] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[    0.146894] devtmpfs: initialized
[    0.146894] x86/mm: Memory block size: 128MB
[    0.146894] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.146894] PM: Registering ACPI NVS region [mem 0x7cd48000-0x7cdb7fff] (458752 bytes)
[    0.146894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146894] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.149796] pinctrl core: initialized pinctrl subsystem
[    0.150079] RTC time: 21:30:16, date: 2019-12-22
[    0.150488] NET: Registered protocol family 16
[    0.150659] audit: initializing netlink subsys (disabled)
[    0.150684] audit: type=2000 audit(1577050216.012:1): state=initialized audit_enabled=0 res=1
[    0.150684] EISA bus registered
[    0.150684] cpuidle: using governor ladder
[    0.150684] cpuidle: using governor menu
[    0.150684] ACPI: bus type PCI registered
[    0.150684] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.150684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.150684] PCI: not using MMCONFIG
[    0.150684] PCI: Using configuration type 1 for base access
[    0.156195] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.157711] ACPI: Added _OSI(Module Device)
[    0.157711] ACPI: Added _OSI(Processor Device)
[    0.157711] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.157711] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157711] ACPI: Added _OSI(Linux-Dell-Video)
[    0.157711] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.157711] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.216113] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.229740] ACPI: Dynamic OEM Table Load:
[    0.229763] ACPI: SSDT 0xFFFF977DBBB4F000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.231833] ACPI: Dynamic OEM Table Load:
[    0.231852] ACPI: SSDT 0xFFFF977DBBB4C800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.234648] ACPI: Dynamic OEM Table Load:
[    0.234666] ACPI: SSDT 0xFFFF977DBBBC2200 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.235841] ACPI: Dynamic OEM Table Load:
[    0.235859] ACPI: SSDT 0xFFFF977DBBBBA180 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.242943] ACPI: Interpreter enabled
[    0.242995] ACPI: (supports S0 S5)
[    0.242999] ACPI: Using IOAPIC for interrupt routing
[    0.243137] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.253776] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.253781] PCI: not using MMCONFIG
[    0.253789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.260825] ACPI: Power Resource [USBC] (on)
[    0.262428] ACPI: Power Resource [WWPR] (off)
[    0.274841] ACPI: Power Resource [PLPE] (on)
[    0.290205] ACPI: Power Resource [CLK0] (on)
[    0.293656] ACPI: Power Resource [CLK0] (on)
[    0.293827] ACPI: Power Resource [CLK1] (on)
[    0.294003] ACPI: Power Resource [CLK3] (off)
[    0.301247] ACPI: Power Resource [P28X] (off)
[    0.301431] ACPI: Power Resource [P18X] (off)
[    0.301606] ACPI: Power Resource [P28P] (off)
[    0.301790] ACPI: Power Resource [P18P] (off)
[    0.301971] ACPI: Power Resource [P28T] (off)
[    0.302145] ACPI: Power Resource [P18T] (off)
[    0.302331] ACPI: Power Resource [P1XT] (off)
[    0.313495] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.313513] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.313770] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.313817] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.315134] PCI host bridge to bus 0000:00
[    0.315142] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.315147] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.315151] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.315156] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.315160] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.315164] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.315168] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.315173] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.315177] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[    0.315181] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.315185] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.315190] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.315207] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.315453] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.315475] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.315490] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.315504] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.315535] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.315761] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.315789] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[    0.315869] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.316080] pci 0000:00:15.0: [8086:0f28] type 00 class 0x040100
[    0.316124] pci 0000:00:15.0: reg 0x10: [mem 0x90400000-0x905fffff]
[    0.316145] pci 0000:00:15.0: reg 0x14: [mem 0x9082a000-0x9082afff]
[    0.316479] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.316516] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.316533] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.316658] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.316863] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.318896] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.319277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.319658] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.320039] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.320432] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.320817] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.321212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.321592] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.323322] gpio gpiochip1: (INT33FC:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.326034] gpio gpiochip2: (INT33FC:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.340145] pci 0000:00:02.0: Linked as a consumer to 80860F41:04
[    0.346302] SCSI subsystem initialized
[    0.346347] libata version 3.00 loaded.
[    0.346347] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.346347] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.346347] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.346347] vgaarb: loaded
[    0.346347] ACPI: bus type USB registered
[    0.346347] usbcore: registered new interface driver usbfs
[    0.346347] usbcore: registered new interface driver hub
[    0.346347] usbcore: registered new device driver usb
[    0.518568] pps_core: LinuxPPS API ver. 1 registered
[    0.518571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.518582] PTP clock support registered
[    0.518657] EDAC MC: Ver: 3.0.0
[    0.518657] Registered efivars operations
[    0.518657] PCI: Using ACPI for IRQ routing
[    0.518657] PCI: pci_cache_line_size set to 64 bytes
[    0.518657] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.518657] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.518657] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7721f000-0x77ffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7b27b000-0x7bffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7b49c000-0x7bffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7b49f000-0x7bffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7bcc7000-0x7bffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7ccc7000-0x7fffffff]
[    0.518657] e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
[    0.518657] NetLabel: Initializing
[    0.518657] NetLabel:  domain hash size = 128
[    0.518657] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.518657] NetLabel:  unlabeled traffic allowed by default
[    0.521944] clocksource: Switched to clocksource tsc-early
[    0.560996] VFS: Disk quotas dquot_6.6.0
[    0.561044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.561380] AppArmor: AppArmor Filesystem Enabled
[    0.561489] pnp: PnP ACPI init
[    0.561659] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.561900] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.561906] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.561911] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.561916] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.561921] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.561936] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.562418] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.570111] pnp: PnP ACPI: found 3 devices
[    0.575926] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.575932] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.575937] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.575941] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.575946] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.575950] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.575954] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.575959] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.575963] pci_bus 0000:00: resource 12 [mem 0x7d000001-0x7f000000 window]
[    0.575967] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.575972] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.576226] NET: Registered protocol family 2
[    0.576677] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.576719] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.576823] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.576939] TCP: Hash tables configured (established 16384 bind 16384)
[    0.577030] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.577062] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.577280] NET: Registered protocol family 1
[    0.577301] NET: Registered protocol family 44
[    0.577327] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.577870] PCI: CLS 64 bytes, default 64
[    0.578001] Unpacking initramfs...
[    1.994627] Freeing initrd memory: 39860K
[    1.994808] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    1.994850] clocksource: Switched to clocksource tsc
[    1.995057] check: Scanning for low memory corruption every 60 seconds
[    2.000707] Initialise system trusted keyrings
[    2.000735] Key type blacklist registered
[    2.000851] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    2.005758] zbud: loaded
[    2.007135] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.007846] fuse init (API version 7.28)
[    2.168378] Key type asymmetric registered
[    2.168382] Asymmetric key parser 'x509' registered
[    2.168419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    2.168539] io scheduler mq-deadline registered
[    2.169051] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.169278] efifb: probing for efifb
[    2.169311] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    2.169314] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    2.169316] efifb: scrolling: redraw
[    2.169320] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.169607] Console: switching to colour frame buffer device 170x48
[    2.169663] fb0: EFI VGA frame buffer device
[    2.169692] intel_idle: MWAIT substates: 0x33000020
[    2.169695] intel_idle: v0.4.1 model 0x37
[    2.170528] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.170603] ACPI: AC: found native INT33F4 PMIC, not loading
[    2.170766] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.170785] ACPI: Lid Switch [LID0]
[    2.179035] [Firmware Bug]: No valid trip found
[    2.179558] battery: ACPI: Battery: found native INT33F4 PMIC, not loading
[    2.180295] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.200782] 00:02: ttyS0 at I/O 0x3f8 (irq = 21, base_baud = 115200) is a 16550A
[    2.240948] hpet: number irqs doesn't agree with number of timers
[    2.241649] Linux agpgart interface v0.103
[    2.262440] loop: module loaded
[    2.264719] libphy: Fixed MDIO Bus: probed
[    2.264728] tun: Universal TUN/TAP device driver, 1.6
[    2.266250] PPP generic driver version 2.4.2
[    2.267630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.267664] ehci-pci: EHCI PCI platform driver
[    2.267761] ehci-platform: EHCI generic platform driver
[    2.267887] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.267909] ohci-pci: OHCI PCI platform driver
[    2.267970] ohci-platform: OHCI generic platform driver
[    2.268048] uhci_hcd: USB Universal Host Controller Interface driver
[    2.268814] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.268831] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.269925] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.269933] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.270292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.270297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.270301] usb usb1: Product: xHCI Host Controller
[    2.270305] usb usb1: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    2.270308] usb usb1: SerialNumber: 0000:00:14.0
[    2.272301] hub 1-0:1.0: USB hub found
[    2.272384] hub 1-0:1.0: 6 ports detected
[    2.795096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.795127] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.795153] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.796009] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    2.796014] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.796018] usb usb2: Product: xHCI Host Controller
[    2.796022] usb usb2: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    2.796025] usb usb2: SerialNumber: 0000:00:14.0
[    2.797898] hub 2-0:1.0: USB hub found
[    2.797964] hub 2-0:1.0: 1 port detected
[    2.799367] i8042: PNP: No PS/2 controller found.
[    2.801594] mousedev: PS/2 mouse device common for all mice
[    2.805265] rtc_cmos 00:00: registered as rtc0
[    2.805423] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    2.805507] i2c /dev entries driver
[    2.810459] device-mapper: uevent: version 1.0.3
[    2.811086] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.811189] platform eisa.0: Probing EISA bus 0
[    2.811195] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.811200] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.811204] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.811207] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.811211] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.811214] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.811218] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.811222] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.811225] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.811229] platform eisa.0: EISA: Detected 0 cards
[    2.811239] intel_pstate: Intel P-state driver initializing
[    2.813244] ledtrig-cpu: registered to indicate activity on CPUs
[    2.813250] EFI Variables Facility v0.08 2004-May-17
[    2.834855] NET: Registered protocol family 10
[    2.875426] Segment Routing with IPv6
[    2.875564] NET: Registered protocol family 17
[    2.876985] Key type dns_resolver registered
[    2.883277] mce: Using 6 MCE banks
[    2.883365] RAS: Correctable Errors collector initialized.
[    2.883693] microcode: sig=0x30678, pf=0x2, revision=0x838
[    2.884858] microcode: Microcode Update Driver: v2.2.
[    2.884930] sched_clock: Marking stable (2884124636, 676626)->(2898411056, -13609794)
[    2.888507] registered taskstats version 1
[    2.888528] Loading compiled-in X.509 certificates
[    2.897369] Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
[    2.897498] Couldn't get size: 0x800000000000000e
[    2.897504] MODSIGN: Couldn't get UEFI db list
[    2.897569] Couldn't get size: 0x800000000000000e
[    2.897575] MODSIGN: Couldn't get UEFI MokListRT
[    2.899144] zswap: loaded using pool lzo/zbud
[    2.921413] Key type big_key registered
[    2.921444] Key type trusted registered
[    2.934937] Key type encrypted registered
[    2.934949] AppArmor: AppArmor sha1 policy hashing enabled
[    2.936544] ima: No TPM chip found, activating TPM-bypass!
[    2.936569] ima: Allocated hash algorithm: sha1
[    2.936581] No architecture policies found
[    2.936608] evm: Initialising EVM extended attributes:
[    2.936609] evm: security.selinux
[    2.936610] evm: security.SMACK64
[    2.936611] evm: security.SMACK64EXEC
[    2.936612] evm: security.SMACK64TRANSMUTE
[    2.936614] evm: security.SMACK64MMAP
[    2.936615] evm: security.apparmor
[    2.936616] evm: security.ima
[    2.936617] evm: security.capability
[    2.936619] evm: HMAC attrs: 0x1
[    2.967068] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    2.983884]   Magic number: 15:397:551
[    2.983919] tty ttyS27: hash matches
[    2.983934] clockevents clockevent2: hash matches
[    2.983994] acpi PNP0C0F:02: hash matches
[    2.984483] rtc_cmos 00:00: setting system clock to 2019-12-22T21:30:19 UTC (1577050219)
[    3.030206] Freeing unused decrypted memory: 2040K
[    3.032231] Freeing unused kernel image memory: 2588K
[    3.042142] Write protecting the kernel read-only data: 22528k
[    3.047423] Freeing unused kernel image memory: 2016K
[    3.049909] Freeing unused kernel image memory: 1728K
[    3.082593] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.083121] x86/mm: Checking user space page tables
[    3.114842] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.114846] Run /init as init process
[    3.133735] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    3.281942] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.281947] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.281951] usb 1-2: Product: USB 2.0 Hub
[    3.282567] hub 1-2:1.0: USB hub found
[    3.282604] hub 1-2:1.0: 4 ports detected
[    3.443322] sdhci: Secure Digital Host Controller Interface driver
[    3.443325] sdhci: Copyright(c) Pierre Ossman
[    3.447492] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.466800] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.487998] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.496785] mmc0: new high speed SDIO card at address 0001
[    3.600394] mmc1: new HS200 MMC card at address 0001
[    3.601199] mmcblk1: mmc1:0001 032G74 29.1 GiB 
[    3.601751] mmcblk1boot0: mmc1:0001 032G74 partition 1 4.00 MiB
[    3.602351] mmcblk1boot1: mmc1:0001 032G74 partition 2 4.00 MiB
[    3.602512] mmcblk1rpmb: mmc1:0001 032G74 partition 3 4.00 MiB, chardev (241:0)
[    3.605341]  mmcblk1: p1 p2
[    3.690375] usb 1-2.1: new low-speed USB device number 3 using xhci_hcd
[    3.920225] usb 1-2.1: New USB device found, idVendor=258a, idProduct=000c, bcdDevice= 1.00
[    3.920240] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.920250] usb 1-2.1: Product: USB KEYBOARD
[    3.920259] usb 1-2.1: Manufacturer: SINO WEALTH
[    4.106153] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
[    4.371500] usb 1-2.2: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[    4.371514] usb 1-2.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    4.371524] usb 1-2.2: Product: USB 2.0 Camera
[    4.371534] usb 1-2.2: Manufacturer: Sonix Technology Co., Ltd.
[    4.397414] hidraw: raw HID events driver (C) Jiri Kosina
[    4.418419] usbcore: registered new interface driver usbhid
[    4.418427] usbhid: USB HID core driver
[    4.430918] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:258A:000C.0001/input/input1
[    4.493162] hid-generic 0003:258A:000C.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2.1/input0
[    4.494590] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input2
[    4.555361] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input3
[    4.556339] input: SINO WEALTH USB KEYBOARD Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input4
[    4.559175] hid-generic 0003:258A:000C.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2.1/input1
[    4.704706] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.089540] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.111368] systemd[1]: Detected architecture x86-64.
[    5.135878] systemd[1]: Set hostname to <fatal-N14A-2WH32MSL>.
[    5.400885] systemd[1]: Reached target Remote File Systems.
[    5.401683] systemd[1]: Created slice System Slice.
[    5.401997] systemd[1]: Listening on udev Control Socket.
[    5.402177] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.402385] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.402529] systemd[1]: Listening on udev Kernel Socket.
[    5.402813] systemd[1]: Listening on Journal Socket.
[    5.460185] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[    5.483346] lp: driver loaded but no devices found
[    5.496852] ppdev: user-space parallel port driver
[    5.651345] systemd-journald[313]: Received request to flush runtime journal from PID 1
[    5.697755] Adding 1392256k swap on /swapfile.  Priority:-2 extents:5 across:1425024k SSFS
[    6.075263] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    6.086378] 80860F0A:00: ttyS4 at MMIO 0x90918000 (irq = 11, base_baud = 2764800) is a 16550A
[    6.087265] serial serial0: tty port ttyS4 registered
[    6.106493] 80860F0A:01: ttyS5 at MMIO 0x9091a000 (irq = 12, base_baud = 2764800) is a 16550A
[    6.171372] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    6.171970] byt_gpio INT33FC:02: [Firmware Bug]: pin 21 forcibly re-configured as GPIO
[    6.172319] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[    6.214179] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    6.239162] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.248897] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.254186] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    6.259816] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.274355] r8723bs: module verification failed: signature and/or required key missing - tainting kernel
[    6.277820] RTL8723BS: module init start
[    6.277824] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    6.277826] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    6.325180] pnetdev = 00000000e8e7f7cf
[    6.367405] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.478664] VFIO - User Level meta-driver version: 0.3
[    6.560516] cryptd: max_cpu_qlen set to 1000
[    6.573013] media: Linux media interface: v0.10
[    6.587849] RTL8723BS: rtw_ndev_init(wlan0)
[    6.588484] RTL8723BS: module init ret =0
[    6.589485] videodev: Linux video capture interface: v2.00
[    6.603507] SSE version of gcm_enc/dec engaged.
[    6.645092] Bluetooth: Core ver 2.22
[    6.645129] NET: Registered protocol family 31
[    6.645131] Bluetooth: HCI device and connection manager initialized
[    6.645139] Bluetooth: HCI socket layer initialized
[    6.645144] Bluetooth: L2CAP socket layer initialized
[    6.645154] Bluetooth: SCO socket layer initialized
[    6.656056] checking generic (80000000 410000) vs hw (80000000 10000000)
[    6.656060] fb0: switching to inteldrmfb from EFI VGA
[    6.656105] Console: switching to colour dummy device 80x25
[    6.656366] [drm] Replacing VGA console driver
[    6.656544] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.656547] [drm] Driver supports precise vblank timestamp query.
[    6.660969] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.671180] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6321)
[    6.686183] Bluetooth: HCI UART driver ver 2.3
[    6.686188] Bluetooth: HCI UART protocol H4 registered
[    6.686190] Bluetooth: HCI UART protocol BCSP registered
[    6.686248] Bluetooth: HCI UART protocol LL registered
[    6.686250] Bluetooth: HCI UART protocol ATH3K registered
[    6.686436] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.686538] Bluetooth: HCI UART protocol Intel registered
[    6.686737] Bluetooth: HCI UART protocol Broadcom registered
[    6.686762] Bluetooth: HCI UART protocol QCA registered
[    6.686765] Bluetooth: HCI UART protocol AG6XX registered
[    6.686767] Bluetooth: HCI UART protocol Marvell registered
[    6.701628] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    6.704722] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.705588] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    6.706896] [drm] HDaudio controller not detected, using LPE audio instead
[    6.709977] fbcon: inteldrmfb (fb0) is primary device
[    6.710103] Console: switching to colour frame buffer device 170x48
[    6.710156] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.723120] uvcvideo 1-2.2:1.0: Entity type for entity Extension 4 was not initialized!
[    6.723127] uvcvideo 1-2.2:1.0: Entity type for entity Processing 3 was not initialized!
[    6.723130] uvcvideo 1-2.2:1.0: Entity type for entity Camera 1 was not initialized!
[    6.725165] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input6
[    6.725405] usbcore: registered new interface driver uvcvideo
[    6.725408] USB Video Class driver (1.1.1)
[    6.955188] intel_rapl: Found RAPL domain package
[    6.955193] intel_rapl: Found RAPL domain core
[    7.034020] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input7
[    7.040731] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input8
[    7.248107] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 55
[    7.273906] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 56
[    7.301740] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input9
[    7.305593] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input10
[    7.307916] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input11
[    7.366029] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[    7.370227] Bluetooth: hci0: RTL: rom_version status=0 version=1

[    7.370233] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_fw.bin

[    7.382528] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_config-OBDA8723.bin

[    7.406098] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508

[    7.420087] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 57
[    7.496091] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 58
[    7.545903] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 63
[    7.577794] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 64
[    9.757175] audit: type=1400 audit(1577050226.267:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=622 comm="apparmor_parser"
[    9.757186] audit: type=1400 audit(1577050226.267:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=622 comm="apparmor_parser"
[    9.757194] audit: type=1400 audit(1577050226.267:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=622 comm="apparmor_parser"
[    9.758130] audit: type=1400 audit(1577050226.271:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=623 comm="apparmor_parser"
[    9.761159] audit: type=1400 audit(1577050226.271:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
[    9.761172] audit: type=1400 audit(1577050226.271:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
[    9.761180] audit: type=1400 audit(1577050226.271:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=619 comm="apparmor_parser"
[    9.761186] audit: type=1400 audit(1577050226.271:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
[    9.761193] audit: type=1400 audit(1577050226.271:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=624 comm="apparmor_parser"
[    9.765429] audit: type=1400 audit(1577050226.275:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=626 comm="apparmor_parser"
[   10.082898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.082902] Bluetooth: BNEP filters: protocol multicast
[   10.082911] Bluetooth: BNEP socket layer initialized
[   10.701809] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   11.567541] broken atomic modeset userspace detected, disabling atomic
[   14.176644] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   15.017845] x86/PAT: pulseaudio:1080 map pfn RAM range req uncached-minus for [mem 0x72e00000-0x72e95fff], got write-combining
[   15.065812] Bluetooth: RFCOMM TTY layer initialized
[   15.065823] Bluetooth: RFCOMM socket layer initialized
[   15.065839] Bluetooth: RFCOMM ver 1.11
[   20.002410] rfkill: input handler disabled
[   21.800294] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   22.331761] RTL8723BS: start auth
[   22.334439] RTL8723BS: auth success, start assoc
[   22.339397] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   22.339415] RTL8723BS: assoc success
[   22.360309] RTL8723BS: send eapol packet
[   22.366315] RTL8723BS: send eapol packet
[   22.366914] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   22.367861] RTL8723BS: set pairwise key camid:4, addr:34:27:92:4e:d0:31, kid:0, type:AES
[   22.374004] RTL8723BS: set group key camid:5, addr:34:27:92:4e:d0:31, kid:2, type:AES
fatal@fatal-N14A-2WH32MSL:~$

Je continue la manipulation que vous m'avez conseillé et poste le reste. Pour info j'avais déjà essayé de blacklister snd_hdmi_lpe_audio, mais sans succès.

Hors ligne

#6 Le 22/12/2019, à 23:36

xubu1957

Re : Pas de son sur N14A avec Ubuntu 18.04

J'ai averti Naziel, il a une meilleure maîtrise des commandes.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#7 Le 22/12/2019, à 23:39

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Merci beaucoup !
Et voilà ce que cela donne après avoir blacklisté snd_hdmi_lpe_audio et redémarré :

fatal@fatal-N14A-2WH32MSL:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[    0.000000] Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=b73b91b6-53ce-4876-ad1d-d1a117e8b865 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007721efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007721f000-0x0000000077225fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077226000-0x000000007722efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007722f000-0x00000000772fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077300000-0x000000007b27afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b27b000-0x000000007b49afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b49b000-0x000000007b49bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b49c000-0x000000007b49cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b49d000-0x000000007b49efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b49f000-0x000000007b49ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b4a0000-0x000000007bcc6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bcc7000-0x000000007c5c6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c5c7000-0x000000007c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007ccc6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ccc7000-0x000000007cd1ffff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007cd20000-0x000000007cd47fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cd48000-0x000000007cdb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cdb8000-0x000000007cdf7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cdf8000-0x000000007cdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7cdf7014  ESRT=0x7b27bf10  SMBIOS=0x7b452000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Thomson N14A-2WH32MSL/N14A-2WH32MSL, BIOS W.N116.Thomson.I002 06/04/2019
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000029] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000064] last_pfn = 0x7ce00 max_arch_pfn = 0x400000000
[    0.000072] MTRR default type: uncachable
[    0.000075] MTRR fixed ranges enabled:
[    0.000078]   00000-9FFFF write-back
[    0.000082]   A0000-FFFFF write-protect
[    0.000085] MTRR variable ranges enabled:
[    0.000089]   0 base 0FFD00000 mask FFFC00000 write-protect
[    0.000093]   1 base 000000000 mask F80000000 write-back
[    0.000097]   2 base 07E000000 mask FFE000000 uncachable
[    0.000101]   3 base 07D000000 mask FFF000000 uncachable
[    0.000105]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000109]   5 base 07C800000 mask FFFC00000 uncachable
[    0.000111]   6 disabled
[    0.000114]   7 disabled
[    0.000341] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010445] esrt: Reserving ESRT space from 0x000000007b27bf10 to 0x000000007b27bf48.
[    0.010473] check: Scanning 1 areas for low memory corruption
[    0.010488] BRK [0x39c01000, 0x39c01fff] PGTABLE
[    0.010494] BRK [0x39c02000, 0x39c02fff] PGTABLE
[    0.010497] BRK [0x39c03000, 0x39c03fff] PGTABLE
[    0.010735] BRK [0x39c04000, 0x39c04fff] PGTABLE
[    0.010744] BRK [0x39c05000, 0x39c05fff] PGTABLE
[    0.011083] BRK [0x39c06000, 0x39c06fff] PGTABLE
[    0.012465] BRK [0x39c07000, 0x39c07fff] PGTABLE
[    0.012805] BRK [0x39c08000, 0x39c08fff] PGTABLE
[    0.013562] BRK [0x39c09000, 0x39c09fff] PGTABLE
[    0.013867] BRK [0x39c0a000, 0x39c0afff] PGTABLE
[    0.014182] BRK [0x39c0b000, 0x39c0bfff] PGTABLE
[    0.014649] RAMDISK: [mem 0x33215000-0x35901fff]
[    0.014670] ACPI: Early table checksum verification disabled
[    0.014679] ACPI: RSDP 0x000000007CDF7014 000024 (v02 INSYDE)
[    0.014688] ACPI: XSDT 0x000000007CDD0188 0000CC (v01 INSYDE INSYDE   00000003      01000013)
[    0.014704] ACPI: FACP 0x000000007CDF1000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014720] ACPI: DSDT 0x000000007CDDD000 00E73F (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014732] ACPI: UEFI 0x000000007CDF6000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.014743] ACPI: MSDM 0x000000007CDF5000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.014754] ACPI: UEFI 0x000000007CDF4000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.014764] ACPI: OEM0 0x000000007CDF3000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014775] ACPI: DBG2 0x000000007CDF2000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014786] ACPI: HPET 0x000000007CDF0000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014796] ACPI: LPIT 0x000000007CDEF000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014807] ACPI: APIC 0x000000007CDEE000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014818] ACPI: MCFG 0x000000007CDED000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014828] ACPI: SLIC 0x000000007CDEC000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.014839] ACPI: SSDT 0x000000007CDDC000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.014850] ACPI: SSDT 0x000000007CDD9000 0024A0 (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.014861] ACPI: SSDT 0x000000007CDD8000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.014871] ACPI: SSDT 0x000000007CDD7000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.014882] ACPI: SSDT 0x000000007CDD6000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.014893] ACPI: SSDT 0x000000007CDD5000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.014904] ACPI: SSDT 0x000000007CDD4000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.014915] ACPI: FPDT 0x000000007CDD3000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.014925] ACPI: CSRT 0x000000007CDD2000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.014936] ACPI: BGRT 0x000000007CDD1000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.014960] ACPI: Local APIC address 0xfee00000
[    0.015250] No NUMA configuration found
[    0.015254] Faking a node at [mem 0x0000000000000000-0x000000007cdfffff]
[    0.015283] NODE_DATA(0) allocated [mem 0x7cc9c000-0x7ccc6fff]
[    0.016242] Zone ranges:
[    0.016245]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.016250]   DMA32    [mem 0x0000000001000000-0x000000007cdfffff]
[    0.016253]   Normal   empty
[    0.016256]   Device   empty
[    0.016259] Movable zone start for each node
[    0.016270] Early memory node ranges
[    0.016273]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.016276]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.016278]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.016281]   node   0: [mem 0x0000000020200000-0x000000007721efff]
[    0.016284]   node   0: [mem 0x0000000077300000-0x000000007b27afff]
[    0.016286]   node   0: [mem 0x000000007b49b000-0x000000007b49bfff]
[    0.016289]   node   0: [mem 0x000000007b49d000-0x000000007b49efff]
[    0.016291]   node   0: [mem 0x000000007b4a0000-0x000000007bcc6fff]
[    0.016294]   node   0: [mem 0x000000007c5c7000-0x000000007c7fffff]
[    0.016297]   node   0: [mem 0x000000007cc00000-0x000000007ccc6fff]
[    0.016299]   node   0: [mem 0x000000007cdf8000-0x000000007cdfffff]
[    0.016602] Zeroed struct page in unavailable ranges: 5016 pages
[    0.016607] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
[    0.016612] On node 0 totalpages: 506472
[    0.016616]   DMA zone: 64 pages used for memmap
[    0.016618]   DMA zone: 22 pages reserved
[    0.016621]   DMA zone: 3996 pages, LIFO batch:0
[    0.016988]   DMA32 zone: 7928 pages used for memmap
[    0.016991]   DMA32 zone: 502476 pages, LIFO batch:63
[    0.061533] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.061545] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[    0.061630] ACPI: Local APIC address 0xfee00000
[    0.061664] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.061673] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.061677] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.061684] Using ACPI (MADT) for SMP configuration information
[    0.061689] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.061718] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.061816] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.061823] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.061830] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.061832] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.061839] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.061846] PM: Registered nosave memory: [mem 0x7721f000-0x77225fff]
[    0.061849] PM: Registered nosave memory: [mem 0x77226000-0x7722efff]
[    0.061851] PM: Registered nosave memory: [mem 0x7722f000-0x772fffff]
[    0.061858] PM: Registered nosave memory: [mem 0x7b27b000-0x7b49afff]
[    0.061865] PM: Registered nosave memory: [mem 0x7b49c000-0x7b49cfff]
[    0.061872] PM: Registered nosave memory: [mem 0x7b49f000-0x7b49ffff]
[    0.061879] PM: Registered nosave memory: [mem 0x7bcc7000-0x7c5c6fff]
[    0.061887] PM: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
[    0.061894] PM: Registered nosave memory: [mem 0x7ccc7000-0x7cd1ffff]
[    0.061897] PM: Registered nosave memory: [mem 0x7cd20000-0x7cd47fff]
[    0.061899] PM: Registered nosave memory: [mem 0x7cd48000-0x7cdb7fff]
[    0.061901] PM: Registered nosave memory: [mem 0x7cdb8000-0x7cdf7fff]
[    0.061907] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.061910] Booting paravirtualized kernel on bare hardware
[    0.061918] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.061943] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.061970] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.062901] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.062929] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.062932] pcpu-alloc: [0] 0 1 2 3 
[    0.063045] Built 1 zonelists, mobility grouping on.  Total pages: 498458
[    0.063048] Policy zone: DMA32
[    0.063053] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=b73b91b6-53ce-4876-ad1d-d1a117e8b865 ro quiet splash vt.handoff=1
[    0.063338] Calgary: detecting Calgary via BIOS EBDA area
[    0.063342] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.081246] Memory: 1891560K/2025888K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 134328K reserved, 0K cma-reserved)
[    0.081786] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.081803] Kernel/User page tables isolation: enabled
[    0.081847] ftrace: allocating 41688 entries in 163 pages
[    0.127827] rcu: Hierarchical RCU implementation.
[    0.127832] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.127834] 	Tasks RCU enabled.
[    0.127836] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.127839] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.139606] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[    0.139730] vt handoff: transparent VT on vt#1
[    0.139745] Console: colour dummy device 80x25
[    0.139754] printk: console [tty0] enabled
[    0.139803] ACPI: Core revision 20181213
[    0.140283] APIC: Switch to symmetric I/O mode setup
[    0.140339] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.140368] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[    0.140375] pid_max: default: 32768 minimum: 301
[    0.144104] LSM: Security Framework initializing
[    0.144142] Yama: becoming mindful.
[    0.144200] AppArmor: AppArmor initialized
[    0.144344] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.144344] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.144344] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.144344] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.144344] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.144344] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.144344] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.144344] process: using mwait in idle threads
[    0.144344] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.144344] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.144344] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.144344] Spectre V2 : Mitigation: Full generic retpoline
[    0.144344] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.144344] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.144344] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.144344] MDS: Mitigation: Clear CPU buffers
[    0.144344] Freeing SMP alternatives memory: 36K
[    0.144344] TSC deadline timer enabled
[    0.144344] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.144344] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.144344] ... version:                3
[    0.144344] ... bit width:              40
[    0.144344] ... generic registers:      2
[    0.144344] ... value mask:             000000ffffffffff
[    0.144344] ... max period:             0000007fffffffff
[    0.144344] ... fixed-purpose events:   3
[    0.144344] ... event mask:             0000000700000003
[    0.144344] rcu: Hierarchical SRCU implementation.
[    0.144344] random: crng done (trusting CPU's manufacturer)
[    0.144344] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.144344] smp: Bringing up secondary CPUs ...
[    0.144344] x86: Booting SMP configuration:
[    0.144344] .... node  #0, CPUs:      #1 #2 #3
[    0.148891] smp: Brought up 1 node, 4 CPUs
[    0.148891] smpboot: Max logical packages: 1
[    0.148891] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[    0.149542] devtmpfs: initialized
[    0.149542] x86/mm: Memory block size: 128MB
[    0.149542] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.149542] PM: Registering ACPI NVS region [mem 0x7cd48000-0x7cdb7fff] (458752 bytes)
[    0.149542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.149542] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.152440] pinctrl core: initialized pinctrl subsystem
[    0.152724] RTC time: 21:36:05, date: 2019-12-22
[    0.153132] NET: Registered protocol family 16
[    0.153304] audit: initializing netlink subsys (disabled)
[    0.153330] audit: type=2000 audit(1577050565.012:1): state=initialized audit_enabled=0 res=1
[    0.153330] EISA bus registered
[    0.153330] cpuidle: using governor ladder
[    0.153330] cpuidle: using governor menu
[    0.153330] ACPI: bus type PCI registered
[    0.153330] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153330] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.153330] PCI: not using MMCONFIG
[    0.153330] PCI: Using configuration type 1 for base access
[    0.158825] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.160359] ACPI: Added _OSI(Module Device)
[    0.160359] ACPI: Added _OSI(Processor Device)
[    0.160359] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160359] ACPI: Added _OSI(Processor Aggregator Device)
[    0.160359] ACPI: Added _OSI(Linux-Dell-Video)
[    0.160359] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.160359] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.218687] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.232290] ACPI: Dynamic OEM Table Load:
[    0.232313] ACPI: SSDT 0xFFFF98B27BB4D000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.234386] ACPI: Dynamic OEM Table Load:
[    0.234406] ACPI: SSDT 0xFFFF98B27BB48000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.237199] ACPI: Dynamic OEM Table Load:
[    0.237217] ACPI: SSDT 0xFFFF98B27BBC2C00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.238391] ACPI: Dynamic OEM Table Load:
[    0.238408] ACPI: SSDT 0xFFFF98B27BBBA000 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.245496] ACPI: Interpreter enabled
[    0.245549] ACPI: (supports S0 S5)
[    0.245552] ACPI: Using IOAPIC for interrupt routing
[    0.245691] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.256360] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.256365] PCI: not using MMCONFIG
[    0.256374] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.263426] ACPI: Power Resource [USBC] (on)
[    0.265028] ACPI: Power Resource [WWPR] (off)
[    0.277457] ACPI: Power Resource [PLPE] (on)
[    0.292821] ACPI: Power Resource [CLK0] (on)
[    0.296271] ACPI: Power Resource [CLK0] (on)
[    0.296440] ACPI: Power Resource [CLK1] (on)
[    0.296615] ACPI: Power Resource [CLK3] (on)
[    0.343224] ACPI: Power Resource [P28X] (off)
[    0.343408] ACPI: Power Resource [P18X] (off)
[    0.343583] ACPI: Power Resource [P28P] (off)
[    0.343764] ACPI: Power Resource [P18P] (off)
[    0.343945] ACPI: Power Resource [P28T] (off)
[    0.344120] ACPI: Power Resource [P18T] (off)
[    0.344305] ACPI: Power Resource [P1XT] (off)
[    0.355487] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.355504] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.355756] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.355802] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.357138] PCI host bridge to bus 0000:00
[    0.357145] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.357150] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.357155] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.357159] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.357163] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.357167] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.357171] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.357175] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.357180] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[    0.357184] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.357188] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.357192] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.357210] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.357458] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.357480] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.357495] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.357509] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.357540] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.357766] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.357795] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[    0.357874] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.358085] pci 0000:00:15.0: [8086:0f28] type 00 class 0x040100
[    0.358129] pci 0000:00:15.0: reg 0x10: [mem 0x90400000-0x905fffff]
[    0.358150] pci 0000:00:15.0: reg 0x14: [mem 0x9082a000-0x9082afff]
[    0.358485] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.358522] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.358538] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.358663] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.358869] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.360899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.361282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.361661] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.362043] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.362438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.362825] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.363219] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.363598] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.365330] gpio gpiochip1: (INT33FC:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.366076] gpio gpiochip2: (INT33FC:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.382140] pci 0000:00:02.0: Linked as a consumer to 80860F41:04
[    0.388655] SCSI subsystem initialized
[    0.388702] libata version 3.00 loaded.
[    0.388702] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.388702] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.388702] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.388702] vgaarb: loaded
[    0.388702] ACPI: bus type USB registered
[    0.388702] usbcore: registered new interface driver usbfs
[    0.388702] usbcore: registered new interface driver hub
[    0.388702] usbcore: registered new device driver usb
[    0.561206] pps_core: LinuxPPS API ver. 1 registered
[    0.561210] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.561220] PTP clock support registered
[    0.561294] EDAC MC: Ver: 3.0.0
[    0.561294] Registered efivars operations
[    0.561294] PCI: Using ACPI for IRQ routing
[    0.561294] PCI: pci_cache_line_size set to 64 bytes
[    0.561294] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.561294] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.561294] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7721f000-0x77ffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7b27b000-0x7bffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7b49c000-0x7bffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7b49f000-0x7bffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7bcc7000-0x7bffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7ccc7000-0x7fffffff]
[    0.561294] e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
[    0.561294] NetLabel: Initializing
[    0.561294] NetLabel:  domain hash size = 128
[    0.561294] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.561294] NetLabel:  unlabeled traffic allowed by default
[    0.564359] clocksource: Switched to clocksource tsc-early
[    0.603682] VFS: Disk quotas dquot_6.6.0
[    0.603728] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.604075] AppArmor: AppArmor Filesystem Enabled
[    0.604190] pnp: PnP ACPI init
[    0.604375] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.604612] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.604618] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.604623] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.604627] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.604632] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.604648] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605120] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.612797] pnp: PnP ACPI: found 3 devices
[    0.618586] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.618592] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.618597] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.618601] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.618605] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.618610] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.618614] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.618618] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.618623] pci_bus 0000:00: resource 12 [mem 0x7d000001-0x7f000000 window]
[    0.618627] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.618631] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.618891] NET: Registered protocol family 2
[    0.619332] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.619375] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.619479] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.619595] TCP: Hash tables configured (established 16384 bind 16384)
[    0.619690] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.619723] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.619957] NET: Registered protocol family 1
[    0.619978] NET: Registered protocol family 44
[    0.620004] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.620554] PCI: CLS 64 bytes, default 64
[    0.620686] Unpacking initramfs...
[    2.035842] Freeing initrd memory: 39860K
[    2.036051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    2.036090] clocksource: Switched to clocksource tsc
[    2.036310] check: Scanning for low memory corruption every 60 seconds
[    2.041909] Initialise system trusted keyrings
[    2.041933] Key type blacklist registered
[    2.042041] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    2.046865] zbud: loaded
[    2.048223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.048966] fuse init (API version 7.28)
[    2.208025] Key type asymmetric registered
[    2.208028] Asymmetric key parser 'x509' registered
[    2.208066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    2.208211] io scheduler mq-deadline registered
[    2.208803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.209031] efifb: probing for efifb
[    2.209065] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    2.209069] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    2.209070] efifb: scrolling: redraw
[    2.209074] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.209358] Console: switching to colour frame buffer device 170x48
[    2.209415] fb0: EFI VGA frame buffer device
[    2.209444] intel_idle: MWAIT substates: 0x33000020
[    2.209447] intel_idle: v0.4.1 model 0x37
[    2.210185] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.210252] ACPI: AC: found native INT33F4 PMIC, not loading
[    2.210418] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.210437] ACPI: Lid Switch [LID0]
[    2.221548] [Firmware Bug]: No valid trip found
[    2.222047] battery: ACPI: Battery: found native INT33F4 PMIC, not loading
[    2.222433] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.242742] 00:02: ttyS0 at I/O 0x3f8 (irq = 21, base_baud = 115200) is a 16550A
[    2.284295] hpet: number irqs doesn't agree with number of timers
[    2.285999] Linux agpgart interface v0.103
[    2.308571] loop: module loaded
[    2.310960] libphy: Fixed MDIO Bus: probed
[    2.310969] tun: Universal TUN/TAP device driver, 1.6
[    2.312577] PPP generic driver version 2.4.2
[    2.313673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.313691] ehci-pci: EHCI PCI platform driver
[    2.313732] ehci-platform: EHCI generic platform driver
[    2.313787] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.313801] ohci-pci: OHCI PCI platform driver
[    2.313826] ohci-platform: OHCI generic platform driver
[    2.313857] uhci_hcd: USB Universal Host Controller Interface driver
[    2.314272] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.314288] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.315382] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.315391] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.315732] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.315738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.315742] usb usb1: Product: xHCI Host Controller
[    2.315745] usb usb1: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    2.315748] usb usb1: SerialNumber: 0000:00:14.0
[    2.317197] hub 1-0:1.0: USB hub found
[    2.317266] hub 1-0:1.0: 6 ports detected
[    2.861698] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.861711] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.861721] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.862119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    2.862124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.862128] usb usb2: Product: xHCI Host Controller
[    2.862132] usb usb2: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    2.862135] usb usb2: SerialNumber: 0000:00:14.0
[    2.863480] hub 2-0:1.0: USB hub found
[    2.863546] hub 2-0:1.0: 1 port detected
[    2.864972] i8042: PNP: No PS/2 controller found.
[    2.865901] mousedev: PS/2 mouse device common for all mice
[    2.868344] rtc_cmos 00:00: registered as rtc0
[    2.868551] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    2.868611] i2c /dev entries driver
[    2.874001] device-mapper: uevent: version 1.0.3
[    2.875327] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.875497] platform eisa.0: Probing EISA bus 0
[    2.875511] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.875523] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.875533] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.875543] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.875553] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.875562] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.875572] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.875582] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.875591] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.875601] platform eisa.0: EISA: Detected 0 cards
[    2.875622] intel_pstate: Intel P-state driver initializing
[    2.877568] ledtrig-cpu: registered to indicate activity on CPUs
[    2.877587] EFI Variables Facility v0.08 2004-May-17
[    2.899924] NET: Registered protocol family 10
[    2.937210] Segment Routing with IPv6
[    2.937358] NET: Registered protocol family 17
[    2.939576] Key type dns_resolver registered
[    2.945890] mce: Using 6 MCE banks
[    2.945976] RAS: Correctable Errors collector initialized.
[    2.946293] microcode: sig=0x30678, pf=0x2, revision=0x838
[    2.947909] microcode: Microcode Update Driver: v2.2.
[    2.947991] sched_clock: Marking stable (2947156112, 674562)->(2961458176, -13627502)
[    2.951304] registered taskstats version 1
[    2.951325] Loading compiled-in X.509 certificates
[    2.957790] Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
[    2.957938] Couldn't get size: 0x800000000000000e
[    2.957945] MODSIGN: Couldn't get UEFI db list
[    2.958009] Couldn't get size: 0x800000000000000e
[    2.958015] MODSIGN: Couldn't get UEFI MokListRT
[    2.959561] zswap: loaded using pool lzo/zbud
[    2.981606] Key type big_key registered
[    2.981640] Key type trusted registered
[    2.991956] Key type encrypted registered
[    2.991981] AppArmor: AppArmor sha1 policy hashing enabled
[    2.994202] ima: No TPM chip found, activating TPM-bypass!
[    2.994220] ima: Allocated hash algorithm: sha1
[    2.994233] No architecture policies found
[    2.994270] evm: Initialising EVM extended attributes:
[    2.994272] evm: security.selinux
[    2.994273] evm: security.SMACK64
[    2.994274] evm: security.SMACK64EXEC
[    2.994275] evm: security.SMACK64TRANSMUTE
[    2.994276] evm: security.SMACK64MMAP
[    2.994277] evm: security.apparmor
[    2.994278] evm: security.ima
[    2.994279] evm: security.capability
[    2.994281] evm: HMAC attrs: 0x1
[    3.025079] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    3.042888]   Magic number: 15:500:652
[    3.042967] byt_gpio INT33FC:01: hash matches
[    3.042990] acpi INT33FC:01: hash matches
[    3.043554] rtc_cmos 00:00: setting system clock to 2019-12-22T21:36:08 UTC (1577050568)
[    3.097164] Freeing unused decrypted memory: 2040K
[    3.099197] Freeing unused kernel image memory: 2588K
[    3.108837] Write protecting the kernel read-only data: 22528k
[    3.113080] Freeing unused kernel image memory: 2016K
[    3.115518] Freeing unused kernel image memory: 1728K
[    3.148587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.149072] x86/mm: Checking user space page tables
[    3.180796] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.180802] Run /init as init process
[    3.200928] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    3.348592] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.348597] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.348601] usb 1-2: Product: USB 2.0 Hub
[    3.349223] hub 1-2:1.0: USB hub found
[    3.349259] hub 1-2:1.0: 4 ports detected
[    3.509758] sdhci: Secure Digital Host Controller Interface driver
[    3.509761] sdhci: Copyright(c) Pierre Ossman
[    3.514755] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.534069] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.554878] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.561277] mmc0: new high speed SDIO card at address 0001
[    3.672476] mmc1: new HS200 MMC card at address 0001
[    3.673125] mmcblk1: mmc1:0001 032G74 29.1 GiB 
[    3.673642] mmcblk1boot0: mmc1:0001 032G74 partition 1 4.00 MiB
[    3.674201] mmcblk1boot1: mmc1:0001 032G74 partition 2 4.00 MiB
[    3.674368] mmcblk1rpmb: mmc1:0001 032G74 partition 3 4.00 MiB, chardev (241:0)
[    3.677765]  mmcblk1: p1 p2
[    3.761135] usb 1-2.1: new low-speed USB device number 3 using xhci_hcd
[    3.989621] usb 1-2.1: New USB device found, idVendor=258a, idProduct=000c, bcdDevice= 1.00
[    3.989635] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.989645] usb 1-2.1: Product: USB KEYBOARD
[    3.989654] usb 1-2.1: Manufacturer: SINO WEALTH
[    4.176805] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
[    4.441537] usb 1-2.2: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[    4.441552] usb 1-2.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    4.441562] usb 1-2.2: Product: USB 2.0 Camera
[    4.441572] usb 1-2.2: Manufacturer: Sonix Technology Co., Ltd.
[    4.463781] hidraw: raw HID events driver (C) Jiri Kosina
[    4.484706] usbcore: registered new interface driver usbhid
[    4.484713] usbhid: USB HID core driver
[    4.493767] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:258A:000C.0001/input/input1
[    4.554081] hid-generic 0003:258A:000C.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2.1/input0
[    4.555424] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input2
[    4.613601] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input3
[    4.614282] input: SINO WEALTH USB KEYBOARD Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:258A:000C.0002/input/input4
[    4.616114] hid-generic 0003:258A:000C.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2.1/input1
[    4.783410] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.210897] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.230029] systemd[1]: Detected architecture x86-64.
[    5.256965] systemd[1]: Set hostname to <fatal-N14A-2WH32MSL>.
[    5.554300] systemd[1]: Reached target User and Group Name Lookups.
[    5.554532] systemd[1]: Reached target Remote File Systems.
[    5.554702] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.555266] systemd[1]: Created slice User and Session Slice.
[    5.555781] systemd[1]: Created slice System Slice.
[    5.556034] systemd[1]: Listening on Syslog Socket.
[    5.556206] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.624493] lp: driver loaded but no devices found
[    5.640253] ppdev: user-space parallel port driver
[    5.658754] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[    5.814154] systemd-journald[316]: Received request to flush runtime journal from PID 1
[    5.908406] Adding 1392256k swap on /swapfile.  Priority:-2 extents:5 across:1425024k SSFS
[    6.253363] 80860F0A:00: ttyS4 at MMIO 0x90918000 (irq = 11, base_baud = 2764800) is a 16550A
[    6.253583] serial serial0: tty port ttyS4 registered
[    6.272774] 80860F0A:01: ttyS5 at MMIO 0x9091a000 (irq = 12, base_baud = 2764800) is a 16550A
[    6.304243] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    6.350242] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[    6.367843] byt_gpio INT33FC:02: [Firmware Bug]: pin 21 forcibly re-configured as GPIO
[    6.372247] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.379783] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    6.380120] VFIO - User Level meta-driver version: 0.3
[    6.384643] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.395267] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.395889] r8723bs: module verification failed: signature and/or required key missing - tainting kernel
[    6.399020] RTL8723BS: module init start
[    6.399024] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    6.399026] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    6.399828] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    6.438868] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    6.443923] pnetdev = 00000000e2a2c8bb
[    6.563101] RTL8723BS: rtw_ndev_init(wlan0)
[    6.563769] RTL8723BS: module init ret =0
[    6.591565] media: Linux media interface: v0.10
[    6.618650] videodev: Linux video capture interface: v2.00
[    6.635137] checking generic (80000000 410000) vs hw (80000000 10000000)
[    6.635141] fb0: switching to inteldrmfb from EFI VGA
[    6.635190] Console: switching to colour dummy device 80x25
[    6.635415] [drm] Replacing VGA console driver
[    6.635618] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.635620] [drm] Driver supports precise vblank timestamp query.
[    6.637140] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.654336] Bluetooth: Core ver 2.22
[    6.654423] NET: Registered protocol family 31
[    6.654425] Bluetooth: HCI device and connection manager initialized
[    6.654433] Bluetooth: HCI socket layer initialized
[    6.654438] Bluetooth: L2CAP socket layer initialized
[    6.654448] Bluetooth: SCO socket layer initialized
[    6.682482] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    6.685493] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.686380] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    6.686816] [drm] HDaudio controller not detected, using LPE audio instead
[    6.689637] fbcon: inteldrmfb (fb0) is primary device
[    6.689761] Console: switching to colour frame buffer device 170x48
[    6.689814] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.747843] Bluetooth: HCI UART driver ver 2.3
[    6.747848] Bluetooth: HCI UART protocol H4 registered
[    6.747850] Bluetooth: HCI UART protocol BCSP registered
[    6.747922] Bluetooth: HCI UART protocol LL registered
[    6.747925] Bluetooth: HCI UART protocol ATH3K registered
[    6.748115] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.748223] Bluetooth: HCI UART protocol Intel registered
[    6.748531] Bluetooth: HCI UART protocol Broadcom registered
[    6.748569] Bluetooth: HCI UART protocol QCA registered
[    6.748572] Bluetooth: HCI UART protocol AG6XX registered
[    6.748574] Bluetooth: HCI UART protocol Marvell registered
[    6.843522] cryptd: max_cpu_qlen set to 1000
[    6.846921] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6321)
[    6.885789] uvcvideo 1-2.2:1.0: Entity type for entity Extension 4 was not initialized!
[    6.885796] uvcvideo 1-2.2:1.0: Entity type for entity Processing 3 was not initialized!
[    6.885800] uvcvideo 1-2.2:1.0: Entity type for entity Camera 1 was not initialized!
[    6.886178] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input6
[    6.886322] SSE version of gcm_enc/dec engaged.
[    6.887009] usbcore: registered new interface driver uvcvideo
[    6.887013] USB Video Class driver (1.1.1)
[    7.163693] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input7
[    7.164828] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input8
[    7.233900] intel_rapl: Found RAPL domain package
[    7.233904] intel_rapl: Found RAPL domain core
[    7.362099] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input9
[    7.388577] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 16 -> VIRQ 55
[    7.399677] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[    7.403867] Bluetooth: hci0: RTL: rom_version status=0 version=1

[    7.403872] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_fw.bin

[    7.413545] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_config-OBDA8723.bin

[    7.436469] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508

[    7.502734] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 17 -> VIRQ 56
[    7.526703] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 18 -> VIRQ 57
[    7.550733] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 19 -> VIRQ 58
[    7.574717] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 24 -> VIRQ 63
[    7.598703] axp288_fuel_gauge axp288_fuel_gauge: HW IRQ 25 -> VIRQ 64
[    9.187330] audit: type=1400 audit(1577050574.639:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=628 comm="apparmor_parser"
[    9.188657] audit: type=1400 audit(1577050574.643:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=627 comm="apparmor_parser"
[    9.188667] audit: type=1400 audit(1577050574.643:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=627 comm="apparmor_parser"
[    9.188673] audit: type=1400 audit(1577050574.643:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=627 comm="apparmor_parser"
[    9.191487] audit: type=1400 audit(1577050574.643:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=624 comm="apparmor_parser"
[    9.191500] audit: type=1400 audit(1577050574.643:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser"
[    9.191508] audit: type=1400 audit(1577050574.643:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=624 comm="apparmor_parser"
[    9.191515] audit: type=1400 audit(1577050574.643:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser"
[    9.192204] audit: type=1400 audit(1577050574.643:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=629 comm="apparmor_parser"
[    9.196207] audit: type=1400 audit(1577050574.647:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=631 comm="apparmor_parser"
[    9.418320] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.418324] Bluetooth: BNEP filters: protocol multicast
[    9.418332] Bluetooth: BNEP socket layer initialized
[   10.132026] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   10.960059] broken atomic modeset userspace detected, disabling atomic
[   13.614839] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   14.155174] Bluetooth: RFCOMM TTY layer initialized
[   14.155184] Bluetooth: RFCOMM socket layer initialized
[   14.155201] Bluetooth: RFCOMM ver 1.11
[   18.840328] rfkill: input handler disabled
[   21.303062] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   21.417739] RTL8723BS: start auth
[   21.419928] RTL8723BS: auth success, start assoc
[   21.424711] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   21.424726] RTL8723BS: assoc success
[   21.427409] RTL8723BS: send eapol packet
[   21.432387] RTL8723BS: send eapol packet
[   21.432560] RTL8723BS: set pairwise key camid:4, addr:34:27:92:4e:d0:31, kid:0, type:AES
[   21.433011] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.433756] RTL8723BS: set group key camid:5, addr:34:27:92:4e:d0:31, kid:2, type:AES
fatal@fatal-N14A-2WH32MSL:~$ 

Hors ligne

#8 Le 22/12/2019, à 23:47

Nuliel

Re : Pas de son sur N14A avec Ubuntu 18.04

Hello,
De mémoire sur ubuntu 19.10 le son fonctionne sur certains thomson.
Que donne

alsamixer

maintenant?

Hors ligne

#9 Le 22/12/2019, à 23:53

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Vous me conseilleriez donc d'installer plutôt Ubuntu 19.10 ? (mon ancien ordinateur était sous Ubuntu 18.04, c'est pour cela que j'ai préféré garder cette version).

J'obtiens désormais ceci :

fatal@fatal-N14A-2WH32MSL:~$ alsamixer
le mixeur ne peut pas être ouvert: Aucun fichier ou dossier de ce type
fatal@fatal-N14A-2WH32MSL:~$

Hors ligne

#10 Le 23/12/2019, à 00:01

Nuliel

Re : Pas de son sur N14A avec Ubuntu 18.04

Sans forcément l'installer, tu peux essayer de voir si tu as du son depuis un live usb avec ubuntu 19.10

Hors ligne

#11 Le 23/12/2019, à 11:38

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Salut Naziel,

J'ai essayé ce matin Ubuntu 19.10 et le son ne marche pas non plus...

Hors ligne

#12 Le 23/12/2019, à 11:53

Nuliel

Re : Pas de son sur N14A avec Ubuntu 18.04

J'aurais dû préciser un peu: peux tu réessayer ubuntu 19.10 et dire si

alsamixer

propose autre chose que la sortie hdmi?

Le retour que j'ai eu pour cette carte son est sur un PC THOMSON NEO14SWH qui a la même carte son

Dernière modification par Nuliel (Le 23/12/2019, à 11:55)

Hors ligne

#13 Le 23/12/2019, à 12:12

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Non, j'obtiens la même chose :
1577098690.png


Sur Toile Libre, choisir le lien « Insérer la miniature dans un forum : » 1469894479.png

Dernière modification par cqfd93 (Le 23/12/2019, à 12:37)

Hors ligne

#14 Le 23/12/2019, à 12:43

Nuliel

Re : Pas de son sur N14A avec Ubuntu 18.04

Attention à bien choisir le lien "Insérer la miniature dans un forum" lorsque tu mets une photo.

Tu as le menu grub en démarrant sur le live usb? Si oui, je vais te proposer une modif pour empêcher le chargement de snd_hdmi_lpe_audio qui permettra de réellement tester le son sur ubuntu 19.10

Hors ligne

#15 Le 23/12/2019, à 12:50

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

Pardon pour les miniatures. Oui, j'ai le menu grub !

Dernière modification par Arthur138 (Le 23/12/2019, à 12:50)

Hors ligne

#16 Le 23/12/2019, à 12:54

Nuliel

Re : Pas de son sur N14A avec Ubuntu 18.04

Ok, tu peux aller faire ceci:
- démarrer sur le live usb jusqu'au menu grub
- faire e sur la première entrée (try ubuntu 19.10 without installing) pour éditer le démarrage
- entre quiet et splash, ajouter ceci

modprobe.blacklist=snd_hdmi_lpe_audio

de sorte à avoir

quiet snd_hdmi_lpe_audio splash

(tu seras avec un agencement QWERTY, faut chercher un peu pour taper ce long texte)puis F10 pour démarrer, et tu donnes

lsb_release -a
uname -r
lsmod

et tu testes le son et tu me dis aussi si

alsamixer

propose quelque chose de mieux que la sortie hdmi

(oui c'est copieux smile )

Dernière modification par Nuliel (Le 23/12/2019, à 12:55)

Hors ligne

#17 Le 23/12/2019, à 13:09

Arthur138

Re : Pas de son sur N14A avec Ubuntu 18.04

J'ai bien fait la manip' que tu m'as conseillée, mais cela ne donne rien.

Voici le retour des trois premières commandes :

ubuntu@ubuntu:~$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 19.10
Release:	19.10
Codename:	eoan
ubuntu@ubuntu:~$ uname -r
5.3.0-18-generic
ubuntu@ubuntu:~$ lsmod
Module                  Size  Used by
rfcomm                 81920  4
cmac                   16384  1
bnep                   24576  2
zfs                  3604480  6
zunicode              331776  1 zfs
zavl                   16384  1 zfs
icp                   286720  1 zfs
zlua                  147456  1 zfs
zcommon                86016  1 zfs
znvpair                81920  2 zfs,zcommon
spl                   122880  5 zfs,icp,znvpair,zcommon,zavl
mei_hdcp               24576  0
gpio_keys              20480  0
intel_rapl_msr         20480  0
intel_soc_dts_thermal    20480  0
intel_powerclamp       20480  0
coretemp               20480  0
kvm_intel             278528  0
kvm                   643072  1 kvm_intel
hci_uart              126976  0
btqca                  20480  1 hci_uart
btrtl                  20480  1 hci_uart
btbcm                  16384  1 hci_uart
irqbypass              16384  1 kvm
punit_atom_debug       16384  0
btintel                24576  1 hci_uart
intel_cstate           20480  0
bluetooth             581632  32 btrtl,btqca,btintel,hci_uart,btbcm,bnep,rfcomm
uvcvideo               98304  0
ecdh_generic           16384  2 bluetooth
ecc                    28672  1 ecdh_generic
videobuf2_vmalloc      20480  1 uvcvideo
videobuf2_memops       20480  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
snd_soc_es8316         49152  0
videodev              208896  3 videobuf2_v4l2,uvcvideo,videobuf2_common
snd_soc_core          241664  1 snd_soc_es8316
mc                     53248  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
snd_compress           24576  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
input_leds             16384  0
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_seq_midi           20480  0
axp288_fuel_gauge      28672  0
snd_pcm               106496  3 snd_soc_core,snd_soc_es8316,snd_pcm_dmaengine
r8723bs               610304  0
axp288_adc             16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
industrialio           77824  2 axp288_adc,axp288_fuel_gauge
extcon_axp288          20480  0
roles                  16384  1 extcon_axp288
snd_rawmidi            36864  1 snd_seq_midi
axp288_charger         24576  0
axp20x_pek             16384  0
mei_txe                28672  1
mei                   110592  3 mei_hdcp,mei_txe
snd_seq                69632  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
cfg80211              712704  1 r8723bs
snd_timer              36864  2 snd_seq,snd_pcm
mac_hid                16384  0
snd                    86016  7 snd_seq,snd_seq_device,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
dw_dmac                16384  2
soc_button_array       20480  0
dw_dmac_core           28672  1 dw_dmac
dptf_power             16384  0
processor_thermal_device    20480  0
intel_rapl_common      24576  2 intel_rapl_msr,processor_thermal_device
acpi_pad              184320  0
int3406_thermal        16384  0
int3403_thermal        16384  0
intel_soc_dts_iosf     20480  2 intel_soc_dts_thermal,processor_thermal_device
int340x_thermal_zone    16384  2 int3403_thermal,processor_thermal_device
int3400_thermal        20480  0
intel_int0002_vgpio    16384  1
intel_cht_int33fe      16384  0
acpi_thermal_rel       16384  1 int3400_thermal
soundcore              16384  1 snd
8250_dw                20480  0
sch_fq_codel           20480  5
parport_pc             40960  0
ppdev                  24576  0
lp                     20480  0
parport                53248  3 parport_pc,lp,ppdev
ip_tables              32768  0
x_tables               40960  1 ip_tables
autofs4                45056  2
overlay               114688  1
nls_iso8859_1          16384  1
dm_mirror              24576  0
dm_region_hash         20480  1 dm_mirror
dm_log                 20480  2 dm_region_hash,dm_mirror
hid_generic            16384  0
usbhid                 57344  0
uas                    24576  0
hid                   126976  2 usbhid,hid_generic
usb_storage            77824  2 uas
crct10dif_pclmul       16384  1
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
i915                 1945600  9
aesni_intel           372736  2
mmc_block              49152  2
i2c_algo_bit           16384  1 i915
drm_kms_helper        184320  1 i915
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
syscopyarea            16384  1 drm_kms_helper
cryptd                 24576  2 crypto_simd,ghash_clmulni_intel
glue_helper            16384  1 aesni_intel
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   491520  5 drm_kms_helper,i915
lpc_ich                24576  0
video                  49152  2 int3406_thermal,i915
axp20x_i2c             16384  0
axp20x                 32768  1 axp20x_i2c
sdhci_acpi             24576  0
sdhci                  57344  1 sdhci_acpi
ubuntu@ubuntu:~$ 

Et le retour d'alsamixer :

ubuntu@ubuntu:~$ alsamixer
cannot open mixer: No such file or directory
ubuntu@ubuntu:~$

Merci encore pour ton aide !

Hors ligne