#1 Le 17/09/2018, à 23:49
- Exodeon
Problème LiveUSB "plante" pendant utilisation
Bonsoir à tous, j'espère que mon sujet est au bon endroit, sinon je m'en excuse.
J'ai obtenu un nouvel ordinateur récemment et j'ai voulu y installer un dual boot. Après quelques difficultés j'y suis parvenu. Cela marchait très bien, seulement ce cher Windows (pour ne pas le citer) a décidé de détruire mon GRUB après une mise à jour.
Je me suis dit que ce n'était pas vraiment un problème et que je n'avais qu'à faire un boot-repair.
Cependant, lorsque je veux utiliser mon live USB pour le faire, il se met à planter soit dès que j'arrive sur le bureau, soit au bout de quelques minutes (ou pendant le boot-repair lorsque j'arrive à le commencer). L'écran est normal puis se fige, je peux bouger la souris mais je ne peux plus cliquer nulle part, jusqu'à un moment où la souris ne bouge plus du tout. J'ai essayé de pas mal chercher de mon côté et je n'ai trouvé aucune solution. Je n'arrive même plus à booter sur Ubuntu via le redémarrage de Windows (Maj + redémarrer -> périphériques et j'ai Ubuntu qui apparaît, mais c'est Windows qui boote).
- Mon PC est un MSI GL62MVR 7RFX, Windows 10, Ubuntu 18.04
- J'ai remarqué que le boot en security mode posait quelques problèmes notamment lors du boot d'Ubuntu via le redémarrage Windows mais le désactiver ne semble pas régler le problème
- Windows boote en UEFI, pas Ubuntu
- Le live USB fonctionne sur d'autres machines et j'ai changé l'iso plusieurs fois (même avec Ubuntu 16.04)
- Lors du boot-repair, on me spécifie bien qu'il faut désactiver le security mode, je dis oui mais ça plante un peu plus loin
Je suis désolé, j'imagine qu'il faut donner plus d'informations mais je ne sais pas vraiment lesquelles. Merci de votre aide
Hors ligne
#2 Le 18/09/2018, à 08:43
- malbo
Re : Problème LiveUSB "plante" pendant utilisation
Bonjour,
Comme ton modèle d'ordi est équipé d'une carte graphique dédiée NVIDIA, je pense que tu devrais utiliser le paramètre de noyau nomodeset comme j'explique là : https://forum.ubuntu-fr.org/viewtopic.p … #p11528561
Explication : lorsque tu démarres en session live, l'affichage est géré par ta carte graphique dédiée NVIDIA mais ça ne marche pas bien parce que le pilote disponible en session live - et qui est sensé commander cette carte - est merdique (il poste le nom crétin de "nouveau" ce pilote). Avec le paramètre de noyau nomodeset, la gestion de l'affichage est confiée à ton processeur (la carte graphique dédiée n'est pas utilisée). Et là l'affichage est correct même s'il n'est pas parfait. Si tu parviens à démarrer une session live par ce moyen, plutôt que de faire directement une réparation avec Boot-Repair, je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse. Après analyse de ce Boot-Info, on pourra te dire si la réparation par Boot-Repair est appropriée ou bien s'il convient de faire autrement.
EDIT : est-ce que Windows 10 était préinstallé à l'achat dans cet ordi ou bien est-ce que c'est toi qui l'as installé ?
Dernière modification par malbo (Le 18/09/2018, à 08:48)
Hors ligne
#3 Le 18/09/2018, à 08:52
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
Bonjour Exodon, bonjour malbo,
En complément de ce qu'a écrit malbo (qui est un fait), pourrais tu donner le retour de
dmesg -lerr
Je voudrais vérifier si ton module WIFI, en plus du driver nouveau, ne met pas le bazarre.
@malbo : côté AMD/ATI/... radeon, c'est pas mieux et en plus sur les cartes anciennes le pilote propriétaire ne fonctionne plus...
Hors ligne
#4 Le 18/09/2018, à 18:11
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Bonjour à tous et merci de vos réponses rapides !
Windows était préinstallé sur mon ordinateur lorsque je l'ai acheté.
Voici le lien du boot-info :
http://paste.ubuntu.com/p/WC6ycHsGny/
La commande donne :
[ 15.349663] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 15.350352] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
(je ne savais pas comment mettre le résultat dans un bloc)
Merci encore à vous
EDIT : En tout cas ça ne plante plus merci beaucoup
Dernière modification par Exodeon (Le 18/09/2018, à 20:33)
Hors ligne
#5 Le 18/09/2018, à 19:03
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
Les messages d'erreur remontés par le noyau porte sur le tpm, que fort probablement tu n'utilises pas. Tu vivras sans t'en rendre compte avec ceux-ci
Hors ligne
#6 Le 18/09/2018, à 19:31
- malbo
Re : Problème LiveUSB "plante" pendant utilisation
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/boot-repair/log/20180726_230910/sda1/bootx64.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sda2: unknown filesystem type ''.
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n
Boot sector info: Syslinux looks at sector 12144704 of /dev/sdc1 for
its second stage. SYSLINUX is installed in the
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sda1 ends after the last sector of /dev/sda
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 + 2,048 616,447 614,400 EFI System partition
/dev/sda2 + 616,448 878,591 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 878,592 498,274,303 497,395,712 Data partition (Windows/Linux)
/dev/sda4 + R 498,274,304 500,117,503 1,843,200 Windows Recovery Environment (Windows)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,703,989,247 1,703,987,200 Data partition (Windows/Linux)
/dev/sdb2 1,703,989,248 1,908,787,199 204,797,952 Data partition (Windows/Linux)
/dev/sdb3 R 1,908,789,248 1,953,523,711 44,734,464 Windows Recovery Environment (Windows)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 14.9 GiB, 16018046976 bytes, 31285248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 112 31,285,247 31,285,136 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/sda1 3C3B-ADAE vfat SYSTEM
/dev/sda2
/dev/sda3 1CD03E4CD03E2C80 ntfs Windows
/dev/sda4 ECAC3F0CAC3ED0B6 ntfs WinRE tools
/dev/sdb1 7830486030482808 ntfs Data
/dev/sdb2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a ext4
/dev/sdb3 3A0849B008496C47 ntfs BIOS_RVY
/dev/sdc1 369F-2129 vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 18 16:04 ata-HGST_HTS541010B7E610_WXK1A9706LX9 -> ../../sdb
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-HGST_HTS541010B7E610_WXK1A9706LX9-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-HGST_HTS541010B7E610_WXK1A9706LX9-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-HGST_HTS541010B7E610_WXK1A9706LX9-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Sep 18 16:04 ata-SAMSUNG_MZNLN256HMHQ-00000_S2SVNA0J504885 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-SAMSUNG_MZNLN256HMHQ-00000_S2SVNA0J504885-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-SAMSUNG_MZNLN256HMHQ-00000_S2SVNA0J504885-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-SAMSUNG_MZNLN256HMHQ-00000_S2SVNA0J504885-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 18 16:04 ata-SAMSUNG_MZNLN256HMHQ-00000_S2SVNA0J504885-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Sep 18 16:04 usb-Lexar_USB_Flash_Drive_AA12978GEND8W4BEPGYT-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Sep 18 16:04 usb-Lexar_USB_Flash_Drive_AA12978GEND8W4BEPGYT-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Sep 18 16:04 wwn-0x50014ee608035c0f -> ../../sdb
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x50014ee608035c0f-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x50014ee608035c0f-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x50014ee608035c0f-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Sep 18 16:04 wwn-0x5002538d002be1e7 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x5002538d002be1e7-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x5002538d002be1e7-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x5002538d002be1e7-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 18 16:04 wwn-0x5002538d002be1e7-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid d5b6c056-f9cd-48a1-b8c0-98411b5f225a root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
linux /boot/vmlinuz-4.15.0-33-generic root=UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-33-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
menuentry 'Ubuntu, avec Linux 4.15.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-33-generic-advanced-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
echo 'Chargement de Linux 4.15.0-33-generic…'
linux /boot/vmlinuz-4.15.0-33-generic root=UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-33-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-33-generic-recovery-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
echo 'Chargement de Linux 4.15.0-33-generic…'
linux /boot/vmlinuz-4.15.0-33-generic root=UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-33-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-d5b6c056-f9cd-48a1-b8c0-98411b5f225a' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a
else
search --no-floppy --fs-uuid --set=root d5b6c056-f9cd-48a1-b8c0-98411b5f225a
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 3C3B-ADAE
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 3C3B-ADAE
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "Windows Boot UEFI fbx64.efi" {
search --fs-uuid --no-floppy --set=root 3C3B-ADAE
chainloader (${root})/EFI/Boot/fbx64.efi
}
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 3C3B-ADAE
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 3C3B-ADAE
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-3C3B-ADAE' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 3C3B-ADAE
else
search --no-floppy --fs-uuid --set=root 3C3B-ADAE
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=d5b6c056-f9cd-48a1-b8c0-98411b5f225a / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
#UUID=3C3B-ADAE /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
UUID=3C3B-ADAE /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
876.802379608 = 941.459386368 boot/grub/grub.cfg 3
876.694026947 = 941.343043584 boot/vmlinuz-4.15.0-29-generic 1
863.072147369 = 926.716661760 boot/vmlinuz-4.15.0-33-generic 1
863.072147369 = 926.716661760 vmlinuz 1
876.694026947 = 941.343043584 vmlinuz.old 1
863.400386810 = 927.069106176 boot/initrd.img-4.15.0-29-generic 5
863.571842194 = 927.253204992 boot/initrd.img-4.15.0-33-generic 2
863.571842194 = 927.253204992 initrd.img 2
863.400386810 = 927.069106176 initrd.img.old 5
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
# search path for the c32 support libraries (libcom32, libutil etc.)
path
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/ldlinux.c32 1
?? = ?? syslinux/libcom32.c32 1
?? = ?? syslinux/libutil.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
/dev/sda1: unknown GPT attributes
8000000000000000
/dev/sda2: unknown GPT attributes
8000000000000000
/dev/sda4: unknown GPT attributes
8000000000000001
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5344/mountinfo) leaked on lvs invocation. Parent PID 17516: bash
File descriptor 63 (pipe:[71167]) leaked on lvs invocation. Parent PID 17516: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20180918_1604 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Warning: failed to translate partition name
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sdb2:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="3C3B-ADAE" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="becb7750-66f5-406b-821c-a7ae59c9ae47"
/dev/sda3: LABEL="Windows" UUID="1CD03E4CD03E2C80" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c6bcd5b9-e6fa-473b-ae9e-cbcf48d73600"
/dev/sda4: LABEL="WinRE tools" UUID="ECAC3F0CAC3ED0B6" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="babc1bc3-47c8-42e9-bb1a-4de03d9b0a3e"
/dev/sdb1: LABEL="Data" UUID="7830486030482808" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="522b145d-cbf6-4e15-89cb-49ef75460c1b"
/dev/sdb2: UUID="d5b6c056-f9cd-48a1-b8c0-98411b5f225a" TYPE="ext4" PARTLABEL="Basic data partition" PARTUUID="8b567abf-3cbd-4109-b5be-8d8eee059c6c"
/dev/sdb3: LABEL="BIOS_RVY" UUID="3A0849B008496C47" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="bd13d906-f052-4853-b86a-326d2f12c6bb"
/dev/sdc1: LABEL="MYLINUXLIVE" UUID="369F-2129" TYPE="vfat" PARTUUID="c3072e18-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="a60b7a68-f788-49ed-af68-4e700d6078c2"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda3.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
=================== sdb2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 28 21:10 grub.d
total 84
-rwxr-xr-x 1 root root 9783 Jul 17 18:13 00_header
-rwxr-xr-x 1 root root 6258 Jul 16 15:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 Jul 17 18:13 10_linux
-rwxr-xr-x 1 root root 11298 Jul 17 18:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 716 Jul 26 21:09 25_custom
-rwxr-xr-x 1 root root 12059 Jul 17 18:13 30_os-prober
-rwxr-xr-x 1 root root 1418 Jul 17 18:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jul 17 18:13 40_custom
-rwxr-xr-x 1 root root 216 Jul 17 18:13 41_custom
-rw-r--r-- 1 root root 483 Jul 17 18:13 README
=================== sdb2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb2: UUID=3C3B-ADAE (sda1)
=================== efibootmgr -v
BootCurrent: 0008
Timeout: 2 seconds
BootOrder: 0000,0004,0008,0006,0007
Boot0000* Windows Boot Manager HD(1,GPT,becb7750-66f5-406b-821c-a7ae59c9ae47,0x800,0x96000)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0004* ubuntu HD(1,GPT,becb7750-66f5-406b-821c-a7ae59c9ae47,0x800,0x96000)/File(EFIUBUNTUSHIMX64.EFI)..BO
Boot0006* UEFI: IP4 KIller PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(309c231900df,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot0007* UEFI: IP6 KIller PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(309c231900df,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0008* UEFI: Lexar USB Flash Drive 1100, Partition 1 PciRoot(0x0)/Pci(0x14,0x0)/USB(18,0)/HD(1,MBR,0xc3072e18,0x70,0x1dd5f90)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda3.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda4.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb3.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:256GB:scsi:512:512:gpt:ATA SAMSUNG MZNLN256:;
1:1049kB:316MB:315MB:fat32:EFI system partition:boot, esp;
2:316MB:450MB:134MB::Microsoft reserved partition:msftres;
3:450MB:255GB:255GB:ntfs:Basic data partition:msftdata;
4:255GB:256GB:944MB:ntfs::hidden, diag;
BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA HGST HTS541010B7:;
1:1049kB:872GB:872GB:ntfs:Basic data partition:msftdata;
2:872GB:977GB:105GB:ext4:Basic data partition:msftdata;
3:977GB:1000GB:22.9GB:ntfs:Basic data partition:hidden, diag;
BYT;
/dev/sdc:16.0GB:scsi:512:512:msdos:Lexar USB Flash Drive:;
1:57.3kB:16.0GB:16.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
loop1 loop squashfs 86.9M
loop2 loop squashfs 34.7M
loop3 loop squashfs 140.9M
loop4 loop squashfs 2.3M
loop5 loop squashfs 13M
loop6 loop squashfs 14.5M
loop7 loop squashfs 3.7M
sda disk 238.5G
sda1 part vfat 300M SYSTEM
sda2 part 128M
sda3 part ntfs 237.2G Windows
sda4 part ntfs 900M WinRE tools
sdb disk 931.5G
sdb1 part ntfs 812.5G Data
sdb2 part ext4 97.7G
sdb3 part ntfs 21.3G BIOS_RVY
sdc disk 14.9G
sdc1 part vfat 14.9G MYLINUXLIVE
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/gtk-common-themes/319
loop3 1 1 0 /snap/gnome-3-26-1604/70
loop4 1 1 0 /snap/gnome-calculator/180
loop5 1 1 0 /snap/gnome-characters/103
loop6 1 1 0 /snap/gnome-logs/37
loop7 1 1 0 /snap/gnome-system-monitor/51
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0
sda3 0 0 0 /mnt/boot-sav/sda3
sda4 0 0 0 /mnt/boot-sav/sda4
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 /mnt/boot-sav/sdb3
sdc 1 0 1 running
sdc1 1 0 1 /cdrom
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4002284k,nr_inodes=1000571,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=804692k,mode=755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=16526)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=804688k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)
/dev/sdb3 on /mnt/boot-sav/sdb3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sdb3 sdc sdc1 sg0 sg1 sg2 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 5e 1b |.X.MSDOS5.0...^.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 60 09 00 51 02 00 00 00 00 00 00 02 00 00 00 |.`..Q...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 ae ad 3b 3c 4e 4f 20 4e 41 4d 45 20 20 |..)..;<NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 68 0d 00 |........?....h..|
00000020 00 00 00 00 80 00 80 00 ff a7 a5 1d 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 80 2c 3e d0 4c 3e d0 1c |.........,>.L>..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 10 b3 1d |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 1c 00 00 00 00 00 |................|
00000030 00 2c 01 00 00 00 00 00 02 00 00 00 00 00 00 00 |.,..............|
00000040 f6 00 00 00 01 00 00 00 b6 d0 3e ac 0c 3f ac ec |..........>..?..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff c7 90 65 00 00 00 00 |...........e....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 08 28 48 30 60 48 30 78 |.........(H0`H0x|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 c5 71 |........?......q|
00000020 00 00 00 00 80 00 80 00 ff 97 aa 02 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 47 6c 49 08 b0 49 08 3a |........GlI..I.:|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 786M 1.7M 785M 1% /run
/dev/sdc1 vfat 15G 5.8G 9.2G 39% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 3.9G 402M 3.5G 11% /
tmpfs tmpfs 3.9G 14M 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 4.0K 3.9G 1% /tmp
tmpfs tmpfs 786M 40K 786M 1% /run/user/999
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop2 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop4 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/sda1 vfat 296M 28M 269M 10% /mnt/boot-sav/sda1
/dev/sda3 fuseblk 238G 99G 139G 42% /mnt/boot-sav/sda3
/dev/sda4 fuseblk 900M 434M 467M 49% /mnt/boot-sav/sda4
/dev/sdb1 fuseblk 813G 213G 601G 27% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 96G 15G 76G 17% /mnt/boot-sav/sdb2
/dev/sdb3 fuseblk 22G 22G 271M 99% /mnt/boot-sav/sdb3
=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 42947BA9-44B0-49EF-80EE-5611A3E2D7D3
Device Start End Sectors Size Type
/dev/sda1 2048 616447 614400 300M EFI System
/dev/sda2 616448 878591 262144 128M Microsoft reserved
/dev/sda3 878592 498274303 497395712 237.2G Microsoft basic data
/dev/sda4 498274304 500117503 1843200 900M Windows recovery environment
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 1AAC9DD1-DE3C-4B2A-B122-D8BC6C4333BF
Device Start End Sectors Size Type
/dev/sdb1 2048 1703989247 1703987200 812.5G Microsoft basic data
/dev/sdb2 1703989248 1908787199 204797952 97.7G Microsoft basic data
/dev/sdb3 1908789248 1953523711 44734464 21.3G Windows recovery environment
Disk /dev/sdc: 14.9 GiB, 16018046976 bytes, 31285248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc3072e18
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 112 31285247 31285136 14.9G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Advice in case of suggested repair
Please disable SecureBoot in the BIOS. Then try again.Do you want to continue?
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
D"après ce que je vois là-dedans, Windows n'a rien cassé dans le démarrage. Sauf qu'il a pu mettre Windows en priorité de démarrage, ce qui est un minuscule problème qui peut être facilement résolu.
Je te prie de presser la touche F11 au démarrage de l'ordi pour faire apparaître le Boot Menu et de sélectionner "ubuntu" dans ce menu. Cela devrait faire apparaître le menu de Grub. Raconte.
Dernière modification par malbo (Le 18/09/2018, à 19:33)
Hors ligne
#7 Le 18/09/2018, à 20:04
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Voilà ce que donne la tentative de boot via le menu F11 :
image boot
Après avoir désactivé "Attempt Secure Mode" dans la section "Secure Boot" du BIOS, choisir Ubuntu dans le Boot Menu ne fait rien et ramène au Boot menu
Dernière modification par Exodeon (Le 18/09/2018, à 20:05)
Hors ligne
#8 Le 19/09/2018, à 05:45
- malbo
Re : Problème LiveUSB "plante" pendant utilisation
Bonjour,
Désolé mais je vais devoir m'absenter plusieurs jours. J'espère qu'un autre contributeur du forum pourra t'aider.
Hors ligne
#9 Le 19/09/2018, à 08:36
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
EDIT : En tout cas ça ne plante plus merci beaucoup
Bonjour,
Peux tu préciser STP? Est ce que le problème est réglé (si oui, quelle est l'action qui l'a permis) ou rencontres tu encore des difficultés?
Dernière modification par NicoApi73 (Le 19/09/2018, à 08:36)
Hors ligne
#10 Le 19/09/2018, à 13:22
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Bonjour,
Mon liveUSB ne plante plus grâce à l'option nomodeset. Cependant, je dois maintenant régler le problème d'Ubuntu qui ne veut plus booter. Je pense tenter le boot-repair et je verrai ce que ça donne
Merci beaucoup du suivi, je tiendrai au courant
Hors ligne
#11 Le 19/09/2018, à 14:04
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
Non, ne tente pas de boot-repair maintenant STP
Pour réparer quelque chose, il faut savoir quoi réparer, et pour l'instant, il n'y a à priori pas grand chose à réparer. Boot-repair peut aussi bien résoudre le problème que l'aggraver.
Je regarderai ta photo dans la journée.
Dernière modification par NicoApi73 (Le 19/09/2018, à 14:07)
Hors ligne
#12 Le 19/09/2018, à 14:51
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
Je viens de regarder ta photo. Le boot repair ne va pas résoudre le problème et dans le meilleur des cas, il ne va pas non plus en créer un autre.
Je demande de l'aide à un intervenant qui est plus expérimenté que moi sur ce type de sujet.
Hors ligne
#13 Le 19/09/2018, à 17:17
- ??
Re : Problème LiveUSB "plante" pendant utilisation
Voilà ce que donne la tentative de boot via le menu F11 :
image bootAprès avoir désactivé "Attempt Secure Mode" dans la section "Secure Boot" du BIOS, choisir Ubuntu dans le Boot Menu ne fait rien et ramène au Boot menu
Bonjour
NicoApi73 m'a demandé de regarder..
Tu as un bios positionné en mode sécure. Dans ce contexte, windows n'est pas autorisé à lancer.
Malbo t'a donné la bonne démarche. Je ne sais pas trop ce que tu vois dans l'écran. Je pense qu'il y a plusieurs fichiers
sda1: __________________________________________________________________________
Boot files: /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
Un seul seul est valable c'est shimx64.efi
les autres font soit un renvoi dans le bios soit un lancement non sécurisé, soit...
Si tu ne peux lire le fichier que tu choisis, voici la démarche tirée du contenu actuel
=================== efibootmgr -v
.....
BootOrder: 0000,0004,0008,0006,0007
Boot0000* Windows Boot Manager HD(1,GPT,becb7750-66f5-406b-821c-a7ae59c9ae47,0x800,0x96000)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0004* ubuntu HD(1,GPT,becb7750-66f5-406b-821c-a7ae59c9ae47,0x800,0x96000)/File(EFIUBUNTUSHIMX64.EFI)..BO
Boot0006* UEFI: IP4 KIller PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(309c231900df,0)/IPv4(0.0.0.00.0.0.0,0,0)..BO
Boot0007* UEFI: IP6 KIller PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(309c231900df,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0008* UEFI: Lexar USB Flash Drive 1100, Partition 1 PciRoot(0x0)/Pci(0x14,0x0)/USB(18,0)/HD(1,MBR,0xc3072e18,0x70,0x1dd5f90)..BO
Tu bootes avec le support d'installation et tu indiques que l'ordre des boots n'est pas 0000,0004 mais 0004,0000
Cela te remettra ubuntu prioritaire par rapport à windows. cela sera avec la commande
sudo efibootmgr -o 4,0
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#14 Le 19/09/2018, à 17:37
- NicoApi73
Re : Problème LiveUSB "plante" pendant utilisation
Merci ?? pour ton passage. L'UEFI n'est pas encore ça pour moi Ca reste beaucoup plus efficace quand tu passes
Hors ligne
#15 Le 19/09/2018, à 21:02
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Je n'ai pas fait le boot-repair
Merci de vos réponses, si j'ai bien compris je n'ai que cette commande à faire ?
Hors ligne
#16 Le 19/09/2018, à 21:17
- ??
Re : Problème LiveUSB "plante" pendant utilisation
Est-elle faite?
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#17 Le 19/09/2018, à 22:43
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Je viens de la faire et cela n'a rien changé : après reboot, le PC a booté directement sur Windows. Il n'y avait bien que cela à faire ?
Edit : elle me renvoie ceci :
BootCurrent: 0005
Timeout: 2 seconds
BootOrder: 0004,0000
Boot0000* Windows Boot Manager
Boot0004* ubuntu
Boot0005* UEFI: Lexar USB Flash Drive 1100, Partition 1
Boot0006* UEFI: IP4 KIller PCIe Network Controller
Boot0007* UEFI: IP6 KIller PCIe Network Controller
Boot0008* UEFI: Lexar USB Flash Drive 1100, Partition 1
Dernière modification par Exodeon (Le 19/09/2018, à 22:49)
Hors ligne
#18 Le 19/09/2018, à 23:11
- ??
Re : Problème LiveUSB "plante" pendant utilisation
Il n'y avait que cela à faire
Arrêtes windows avec la fonctionnalité 'REDEMARER" et relances
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#19 Le 19/09/2018, à 23:22
- ??
Re : Problème LiveUSB "plante" pendant utilisation
Bonsoir à tous, j'espère que mon sujet est au bon endroit, sinon je m'en excuse.
J'ai obtenu un nouvel ordinateur récemment et j'ai voulu y installer un dual boot. Après quelques difficultés j'y suis parvenu.
Je vois que tu as eu quelques difficultés.
Je pense à une des difficultés.
Aurais-tu eu besoin de faire cette action
=================== Final advice in case of suggested repair
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
c'est à dire la commande
bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#20 Le 19/09/2018, à 23:26
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
Excuse-moi mais je n'ai pas compris ton premier message.
Les difficultés venaient principalement du pilote de carte graphique qui m'empêchaient d'avoir un affichage normal. J'ai eu d'autres soucis mais je ne m'en rappelle pas très bien, et je suis à peu près sûr de ne pas avoir faite cette commande
Edit : en vrai c'est possible, plus je la regarde et plus elle me dit quelque chose. Il y a un moyen de vérifier ?
Dernière modification par Exodeon (Le 19/09/2018, à 23:29)
Hors ligne
#21 Le 19/09/2018, à 23:29
- ??
Re : Problème LiveUSB "plante" pendant utilisation
Lorsque windows bootes, Par quelle commande l'arrêtes-tu ?
"ARRETER" ou "REDEMARRER"
Te dis-tu qu'il y a encore des mises à jour a finir?
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#22 Le 19/09/2018, à 23:34
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
J'ai essayé les deux façons et aucune n'a donnée de résultat. Depuis la dernière mise à jour qui a cassé mon boot je n'en ai pas eu de nouvelle et aucun message relatif à cela. J'ai vu qu'il y avait possiblement un ordre de boot à changer dans le bios (je crois que c'est quelque chose comme UEFI BBS Hard Drive Boot Order) mais même après avoir Ubuntu en premier dans celui-ci cela ne fonctionne pas. J'ai vraiment l'impression qu'il essaye de booter sur Ubuntu, mais qu'il n'y parvient pas et qu'il va sur Windows par défaut (ce qui est cohérent avec le fait que je ne puisse pas booter sur Ubuntu ni avec le Boot Menu ni avec le menu Shift + Redémarrer de Windows)
Hors ligne
#23 Le 19/09/2018, à 23:44
- ??
Re : Problème LiveUSB "plante" pendant utilisation
=================== Final advice in case of suggested repair
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efic'est à dire la commande
bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi
Cette commande c'est pour le boot en sécure
Si tu as fais cette commande, la mise à jour de windows l'a éliminée. Il faut alors la refaire.
Mais si tu ne l'as pas faite, il me semble inutile de la faire. Car elle présente un certain risque.
Mais si tu avais un boot non secure, la commande était
bcdedit /set {bootmgr} path \EFI\ubuntu\grub64.efi
========
Si tu as bien fait REDEMARER et que windows ne t'a pas dit qu'il restait des mises à jour à finir et que tu as rebooté sur windows
On n'a pas d'autre choix que de la faire.
J'espère simplement que la codification est restée la même avec la nouvelle version de windows.
Travailles en copier/coller car si erreur de frappe, c'est assez compliqué a rectifier
C'est à faire en mode administratif afin d'avoir l'autorisation de modifier
Si tu as un ordinateur portable, merci de dire sa référence, Il est probable que cela soit indiqué dans notre base de souvenir https://doc.ubuntu-fr.org/portable
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#24 Le 19/09/2018, à 23:47
- Exodeon
Re : Problème LiveUSB "plante" pendant utilisation
J'ai donné sa référence dans mon premier post (MSI GL62MVR 7RFX) j'ai vu qu'il y avait quelques fils dessus
J'essaie cela tout de suite
EDIT : les deux commandes n'ont pas fonctionné, que ce soit après redémarrage ou arrêt.
Dernière modification par Exodeon (Le 19/09/2018, à 23:56)
Hors ligne
#25 Le 20/09/2018, à 00:04
- ??
Re : Problème LiveUSB "plante" pendant utilisation
. J'ai vraiment l'impression qu'il essaye de booter sur Ubuntu, mais qu'il n'y parvient pas et qu'il va sur Windows par défaut (ce qui est cohérent avec le fait que je ne puisse pas booter sur Ubuntu ni avec le Boot Menu ni avec le menu Shift + Redémarrer de Windows)
J'y ai pensé, Mais le boot-info que tu as fourni indique
Boot0004* ubuntu HD(1,GPT,becb7750-66f5-406b-821c-a7ae59c9ae47,0x800,0x96000)/File(EFIUBUNTUSHIMX64.EFI)..BO
donc fichier /EFI/UBUNTU/SHIMX64.EFI d'une partition GPT en position 1 ayant comme identification becb7750-66f5-406b-821c-a7ae59c9ae47
si on recherche, on trouve que c'est sda1
=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="3C3B-ADAE" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="becb7750-66f5-406b-821c-a7ae59c9ae47"
Qui est bien GPT
Drive: sda _____________________________________________________________________
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
et qui contient les fichiers
sda1: __________________________________________________________________________
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/boot-repair/log/20180726_230910/sda1/bootx64.efi
Donc si sécure boot on lance le shimx64.efi qui va lancer grubx64.efi
Si non sécure on lance directement grubx64.efi
Dans les deux cas, le fichier de paramétrage est lu
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid d5b6c056-f9cd-48a1-b8c0-98411b5f225a root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
s'il n'est pas bon, cela plante avec un message finissant par grub?
comme c'est bon, on recherche la partition 5b6c056-f9cd-48a1-b8c0-98411b5f225a qui doit être en position 2 du disque N°1
C'est donc
/dev/sdb2 d5b6c056-f9cd-48a1-b8c0-98411b5f225a ext4
et son fichier de paramétrage totalement classique.
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne