#1 Le 07/09/2018, à 08:45
- fanum
[Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Discussion déplacée suite à une investigation plus poussée (initialement ici).
Bonjour,
Depuis une double évolution (changement de CM+CPU+Ram+Gpu) et mise à niveau de 16.04 à 18.04, je sais, ce n'est pas malin d'avoir fait les deux en même temps et une installation propre aurait été plus intelligente), j'ai des l'allumage du PC des freeze de plusieurs secondes à une minute. D'après dmesg, ces freeze se terminent par un «link up» du SSD en 6 Gbs et recommencent. Puis au bout d'une dizaine de freeze, le SSD est «link up» en 3 Gbs et du coup il n'y a plus de problèmes, toute la session se passe bien.
Est-ce un problème de SSD en fin de vie, une incompatibilité avec la CM et avec 18.04 ??
Voici ma configuration :
- Ubuntu Mate 18.04.1 64 b
- noyau 4.15.0-33
- Intel i5 8500, DDR4 8 Go sur carte mère Gigabyte B360M D3H
- carte graphique NVidia 1050 Ti 4 Go avec le pilote nvidia 390.48 mais le problème se produit aussi avec le pilote nouveau et également quand je démarre sur le GPU Intel
La fin du dmesg du jour :
[ 219.967981] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
[ 219.967992] ata5: SError: { PHYRdyChg CommWake }
[ 219.968001] ata5.00: failed command: SMART
[ 219.968017] ata5.00: cmd b0/d1:01:01:4f:c2/00:00:00:00:00/00 tag 25 pio 512 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 219.968025] ata5.00: status: { DRDY }
[ 219.968032] ata5: hard resetting link
[ 220.283278] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 220.295241] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 220.295249] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 220.295255] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 220.315228] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 220.315235] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 220.315241] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 220.324477] ata5.00: configured for UDMA/133
[ 220.324916] ata5: EH complete
[ 296.767433] ata5.00: NCQ disabled due to excessive errors
[ 296.767440] ata5.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x50000 action 0x6 frozen
[ 296.767451] ata5: SError: { PHYRdyChg CommWake }
[ 296.767459] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767475] ata5.00: cmd 61/08:00:68:38:c0/00:00:04:00:00/40 tag 0 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767483] ata5.00: status: { DRDY }
[ 296.767489] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767503] ata5.00: cmd 61/08:08:00:09:00/00:00:06:00:00/40 tag 1 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.767510] ata5.00: status: { DRDY }
[ 296.767515] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767529] ata5.00: cmd 61/08:10:48:0b:40/00:00:06:00:00/40 tag 2 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.767536] ata5.00: status: { DRDY }
[ 296.767541] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767555] ata5.00: cmd 61/18:18:d8:0b:40/00:00:06:00:00/40 tag 3 ncq dma 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767561] ata5.00: status: { DRDY }
[ 296.767566] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767580] ata5.00: cmd 61/10:20:38:0d:40/00:00:06:00:00/40 tag 4 ncq dma 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.767586] ata5.00: status: { DRDY }
[ 296.767591] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767605] ata5.00: cmd 61/08:28:90:1a:04/00:00:01:00:00/40 tag 5 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767611] ata5.00: status: { DRDY }
[ 296.767616] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767630] ata5.00: cmd 61/08:30:f8:0d:40/00:00:02:00:00/40 tag 6 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767636] ata5.00: status: { DRDY }
[ 296.767641] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767654] ata5.00: cmd 61/08:38:58:1a:40/00:00:02:00:00/40 tag 7 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767661] ata5.00: status: { DRDY }
[ 296.767666] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767679] ata5.00: cmd 61/08:40:10:1b:40/00:00:02:00:00/40 tag 8 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767685] ata5.00: status: { DRDY }
[ 296.767691] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767704] ata5.00: cmd 61/08:48:a8:2c:40/00:00:02:00:00/40 tag 9 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767710] ata5.00: status: { DRDY }
[ 296.767715] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767729] ata5.00: cmd 61/08:50:50:2d:40/00:00:02:00:00/40 tag 10 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767736] ata5.00: status: { DRDY }
[ 296.767741] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767754] ata5.00: cmd 61/08:58:70:2d:40/00:00:02:00:00/40 tag 11 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.767761] ata5.00: status: { DRDY }
[ 296.767766] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767779] ata5.00: cmd 61/08:60:18:39:40/00:00:02:00:00/40 tag 12 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767786] ata5.00: status: { DRDY }
[ 296.767791] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767804] ata5.00: cmd 61/08:68:38:08:00/00:00:03:00:00/40 tag 13 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767810] ata5.00: status: { DRDY }
[ 296.767816] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767829] ata5.00: cmd 61/08:70:80:0b:00/00:00:03:00:00/40 tag 14 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767836] ata5.00: status: { DRDY }
[ 296.767841] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767854] ata5.00: cmd 61/10:78:30:14:40/00:00:06:00:00/40 tag 15 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767861] ata5.00: status: { DRDY }
[ 296.767866] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767880] ata5.00: cmd 61/18:80:a0:15:40/00:00:06:00:00/40 tag 16 ncq dma 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767886] ata5.00: status: { DRDY }
[ 296.767891] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767905] ata5.00: cmd 61/18:88:d0:15:40/00:00:06:00:00/40 tag 17 ncq dma 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767911] ata5.00: status: { DRDY }
[ 296.767916] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767930] ata5.00: cmd 61/08:90:f0:23:40/00:00:06:00:00/40 tag 18 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.767936] ata5.00: status: { DRDY }
[ 296.767941] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767955] ata5.00: cmd 61/18:98:08:26:40/00:00:06:00:00/40 tag 19 ncq dma 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.767961] ata5.00: status: { DRDY }
[ 296.767966] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.767980] ata5.00: cmd 61/10:a0:18:27:40/00:00:06:00:00/40 tag 20 ncq dma 8192 out
res 40/00:01:e8:7f:d5/00:00:1d:00:00/e0 Emask 0x4 (timeout)
[ 296.767986] ata5.00: status: { DRDY }
[ 296.767991] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768005] ata5.00: cmd 61/08:a8:08:08:80/00:00:06:00:00/40 tag 21 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768011] ata5.00: status: { DRDY }
[ 296.768016] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768030] ata5.00: cmd 61/08:b0:80:08:80/00:00:06:00:00/40 tag 22 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.768037] ata5.00: status: { DRDY }
[ 296.768042] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768056] ata5.00: cmd 61/08:b8:08:09:80/00:00:06:00:00/40 tag 23 ncq dma 4096 out
res 40/00:01:a0:7f:d5/00:00:1d:00:00/e0 Emask 0x4 (timeout)
[ 296.768062] ata5.00: status: { DRDY }
[ 296.768067] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768081] ata5.00: cmd 61/08:c0:38:09:80/00:00:06:00:00/40 tag 24 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 296.768087] ata5.00: status: { DRDY }
[ 296.768092] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768106] ata5.00: cmd 61/10:c8:48:09:80/00:00:06:00:00/40 tag 25 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768112] ata5.00: status: { DRDY }
[ 296.768117] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768131] ata5.00: cmd 61/10:d0:60:09:80/00:00:06:00:00/40 tag 26 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768137] ata5.00: status: { DRDY }
[ 296.768142] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768156] ata5.00: cmd 61/08:d8:88:09:80/00:00:06:00:00/40 tag 27 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768162] ata5.00: status: { DRDY }
[ 296.768167] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768181] ata5.00: cmd 61/10:e0:b8:09:80/00:00:06:00:00/40 tag 28 ncq dma 8192 out
res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768187] ata5.00: status: { DRDY }
[ 296.768192] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768205] ata5.00: cmd 61/08:e8:20:67:44/00:00:03:00:00/40 tag 29 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768212] ata5.00: status: { DRDY }
[ 296.768217] ata5.00: failed command: WRITE FPDMA QUEUED
[ 296.768231] ata5.00: cmd 61/08:f0:30:10:c0/00:00:03:00:00/40 tag 30 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 296.768237] ata5.00: status: { DRDY }
[ 296.768244] ata5: hard resetting link
[ 297.082735] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 297.084823] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 297.084830] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 297.084837] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 297.104788] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 297.104795] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 297.104801] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 297.114016] ata5.00: configured for UDMA/133
[ 297.114421] ata5.00: device reported invalid CHS sector 0
[ 297.114425] ata5.00: device reported invalid CHS sector 0
[ 297.114428] ata5.00: device reported invalid CHS sector 0
[ 297.114431] ata5.00: device reported invalid CHS sector 0
[ 297.114433] ata5.00: device reported invalid CHS sector 0
[ 297.114436] ata5.00: device reported invalid CHS sector 0
[ 297.114439] ata5.00: device reported invalid CHS sector 0
[ 297.114442] ata5.00: device reported invalid CHS sector 0
[ 297.114445] ata5.00: device reported invalid CHS sector 0
[ 297.114448] ata5.00: device reported invalid CHS sector 0
[ 297.114451] ata5.00: device reported invalid CHS sector 0
[ 297.114453] ata5.00: device reported invalid CHS sector 0
[ 297.114458] ata5.00: device reported invalid CHS sector 0
[ 297.114462] ata5.00: device reported invalid CHS sector 0
[ 297.114464] ata5.00: device reported invalid CHS sector 0
[ 297.114467] ata5.00: device reported invalid CHS sector 0
[ 297.114470] ata5.00: device reported invalid CHS sector 0
[ 297.114500] ata5: EH complete
[ 334.656146] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
[ 334.656158] ata5: SError: { PHYRdyChg CommWake }
[ 334.656166] ata5.00: failed command: WRITE DMA
[ 334.656182] ata5.00: cmd ca/00:08:80:72:44/00:00:00:00:00/e3 tag 16 dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 334.656189] ata5.00: status: { DRDY }
[ 334.656197] ata5: hard resetting link
[ 334.971338] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 334.983308] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 334.983315] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 334.983321] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 335.003321] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 335.003329] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 335.003335] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 335.012590] ata5.00: configured for UDMA/133
[ 335.012993] ata5.00: device reported invalid CHS sector 0
[ 335.013006] ata5: EH complete
[ 367.424400] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
[ 367.424412] ata5: SError: { PHYRdyChg CommWake }
[ 367.424420] ata5.00: failed command: READ DMA
[ 367.424436] ata5.00: cmd c8/00:08:60:28:00/00:00:00:00:00/e0 tag 1 dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 367.424443] ata5.00: status: { DRDY }
[ 367.424451] ata5: hard resetting link
[ 367.739642] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 367.751680] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 367.751688] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 367.751694] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 367.771639] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 367.771646] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 367.771652] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 367.780897] ata5.00: configured for UDMA/133
[ 367.781336] ata5: EH complete
[ 428.864419] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
[ 428.864431] ata5: SError: { PHYRdyChg CommWake }
[ 428.864439] ata5.00: failed command: WRITE DMA
[ 428.864455] ata5.00: cmd ca/00:80:00:08:f5/00:00:00:00:00/e0 tag 7 dma 65536 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 428.864462] ata5.00: status: { DRDY }
[ 428.864470] ata5: hard resetting link
[ 429.179712] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 429.191698] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 429.191705] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 429.191712] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 429.211662] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 429.211670] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 429.211676] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 429.220907] ata5.00: configured for UDMA/133
[ 429.221315] ata5.00: device reported invalid CHS sector 0
[ 429.221327] ata5: EH complete
[ 555.839926] ata5: limiting SATA link speed to 3.0 Gbps
[ 555.839934] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x50000 action 0x6 frozen
[ 555.839945] ata5: SError: { PHYRdyChg CommWake }
[ 555.839953] ata5.00: failed command: WRITE DMA
[ 555.839969] ata5.00: cmd ca/00:80:f0:12:7e/00:00:00:00:00/e0 tag 29 dma 65536 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 555.839976] ata5.00: status: { DRDY }
[ 555.839984] ata5: hard resetting link
[ 556.155243] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 556.167211] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 556.167218] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 556.167224] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 556.187185] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 556.187192] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 556.187199] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 556.196439] ata5.00: configured for UDMA/133
[ 556.196858] ata5.00: device reported invalid CHS sector 0
[ 556.196870] ata5: EH completeEt vous trouverez sur l'autre discussion le smartctl du SSD.
Merci d'avance pour votre aide
Modération : la prochaine fois signale ta discussion en demandant à la modération de la déplacer là où tu le souhaites.
Dernière modification par fanum (Le 11/09/2018, à 08:48)
Hors ligne
#2 Le 07/09/2018, à 13:32
- fanum
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Mes excuses à la modération pour n'avoir pas prévenu du déplacement.
Hors ligne
#3 Le 07/09/2018, à 16:12
- ??
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Bonjour
Deux autres tests
1) Vérifier que le bios de la carte mère est bien positionné sur AHCI et non sur IDE.
2) Débrancher tous les autres disques et vérifier si cela fonctionne avec le seul SSD (manque de puissance électrique?)
Il est possible que bionic ait modifié le code de NCQ que le SSD ne comprend plus.
1) Modifier un paramètre du fichier /etc/default/grub pour qu'il devienne
GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash ro libata.force=noncq”Je pense qu'on devrait pouvoir dire "pour seulement ata5" mais je ne trouve pas réellement confirmation
GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash ro libata.force=5.0:noncq”2) mettre à jour le grub
sudo update-grubUtiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#4 Le 07/09/2018, à 16:47
- fanum
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Merci pour ton message.
Je vais voir pour le bios (si je trouve) et pour l'alim. En attendant, j'ai rebooté et voici le dmesg | grep NCQ
[ 3.998819] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.998938] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.016865] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AAIl n'y a plus NCQ disabled et pourtant je n'ai pas de freeze. Par contre, le SSD est toujours en Gbs. Si je reboot, il reste en 3 Gbs alors que si j'éteins et rallume, il repasse en 6 Gbs et ça freeze jusqu'à ce qu'il repasse en 3 Gbs. Le problème semble plutôt venir de là que de NCQ. Je vais ouvrir la tour et tester sans HDD.
Hors ligne
#5 Le 07/09/2018, à 16:59
- PPdM
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
peut etre un souci de pilote
essayes ceci
sudo apt update && sudo apt dist-upgrade -ypour estre sur qu tout est a jour
La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera
Hors ligne
#6 Le 07/09/2018, à 21:32
- fanum
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Les mises à jour n'ont rien apporté.
Le bios est bien en AHCI mais je n'ai pas réussi à démarrer sans les deux HDD (j'avais le logo Ubuntu, en faisant F11 j'ai vu qu'il essayait de trouver les HDD mais ça n'ouvrait pas de session). Faut-il enlever les HDD du fstab pour pouvoir démarrer sans ?
Hors ligne
#7 Le 07/09/2018, à 21:40
- PPdM
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Ton grub est sans doute installé sur l'un des autres disques ce qui explique peut etre tes problèmes*
Tu peux essayer de redemarer , avec juste le ssd, sur un cd d'installation et de réinstaller ton grub sur le bon disque
La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera
Hors ligne
#8 Le 07/09/2018, à 21:59
- fanum
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
A priori non car j'ai bien eu grub, c'est ensuite quand le logo avec les petits points est apparu que ça a tourné en rond pendant longtemps avant de me donner la main en console uniquement.
Dernière modification par fanum (Le 07/09/2018, à 22:00)
Hors ligne
#9 Le 11/09/2018, à 08:47
- fanum
Re : [Résolu] Freeze avec un SSD qui cessent quand il passe en 3 Gb/s
Bonjour,
Mon problème a été résolu par une installation propre de bionic. C'était bien un problème suite à la mise à niveau de 16.04 à 18.04. Merci à ceux qui m'ont aidé.
Hors ligne