#26 Le 13/08/2018, à 18:44
- lucmars
Re : Installation 18.04 impossible d'accéder à windows comme avant
lucmars a écrit :Il se peut que sur ton pc, un seul port usb boot en legacy.
Essaies chaque port usb et tu vérifies le mode de boot avec la commande.
Si aucun des ports usb ne passe en legacy, alors ton bios est p'tete buggé, ou bien il faut comprendre son fonctionnement
La question comment "essayer chaque port usb"?
Je n'ai pas compris non plus le message de Babdu89.
Merci de m'éclaicir.
En gras, comment essayer différente prises électriques, c'est plus clair ?
Quant au post de Badbu, voir dans le bios si un "secure boot" serait activé, si oui, tu désactives.
Gaulois Matter !
Hors ligne
#27 Le 13/08/2018, à 18:50
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
Veux tu dire que je dois booter avec ma clef dans chaque port USB (j'en ai 4) et voir le résultat ?
J'ai déjà cherché dans le bios un "secure boot" sans succès mais je vais recommencer dès fois que j'ai mal vu.
Encore merci.
Hors ligne
#28 Le 13/08/2018, à 18:58
- lucmars
Re : Installation 18.04 impossible d'accéder à windows comme avant
Veux tu dire que je dois booter avec ma clef dans chaque port USB (j'en ai 4) et voir le résultat ?
J'ai déjà cherché dans le bios un "secure boot" sans succès mais je vais recommencer dès fois que j'ai mal vu.
Encore merci.
En gras, tout à fait.
Pour le secure boot, oui, fouilles, p'tete que tu trouveras une autre lumière...
Mais bon, comme t'as déjà un dual-boot win/buntu en legacy sur ton hd le dit secure-boot n'est p'tete pas en cause (voir inexistant).
Cela-dit, quand on a un pc, faut connaitre son bios, car y'en a des bons comme des merdiques.
Gaulois Matter !
Hors ligne
#29 Le 13/08/2018, à 20:48
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
J'ai rebooter sur mes 2 autres ports USB (j'en ai que 3 et pas 4) et à chaque fois j'ai refait le test la réponse est toujours Session EFI.
A chaque fois que j'ai rebooter j'ai vu le même grub qu'avant : est-ce normal?
Je n'ai pas eu l'impression d'une réintallation .
Après un second examen je n'ai pas trouvé de "security boot", y a t il d'autres dénomination?
Et maintenant que puis-je faire ?
Merci d'avance de vos lumières.
Dernière modification par geirnaert17 (Le 14/08/2018, à 12:30)
Hors ligne
#30 Le 14/08/2018, à 17:27
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
N'aurait-il pas fallu désinstaller ubuntu 18.04 préalablement à ses manip?
Comment désinstalle t-on ubuntu 18.04 ?
Merci de votre aide
Hors ligne
#31 Le 14/08/2018, à 18:01
- lucmars
Re : Installation 18.04 impossible d'accéder à windows comme avant
geirnaert@geirnaert-K53E:~$ [ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI" Session EFI
donc pas de pot, maintenant quoi chercher dans le bios?
legacy est "enable"
UEFI est desable
le boot se fait 1 ubuntu
2 disque dur
3 cdJe suis confus d'être aussi nul, mais j'aimerai bien m'en sortir, merci d'avance
Comme tu te dis etre nul, as-tu bien sauvegardé tes modifes dans le bios ?
En gras, il s'agit du boot-order je suppose ? Mais si oui, ou est l'usb ? En fait d'après ton retour de commande
geirnaert@geirnaert-K53E:~$ [ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI"
Session EFI
tu boot sur ta 1804 installé et non ta clef !
Passes l'usb en premier dans l'ordre de boot.
Autre piste, sais-tu accéder au boot-menu de ton bios ? Ce menu liste tous les supports internes et externes amorçables (faut brancher la clef ou inserer un dvd avant d'allumer). Ce sera p'tete mieux par là.
On ne désinstalle pas linux, on l'écrase par une autre installe ou bien on nettoie le disque de ses partitions. Aucune incidence sur le bios, au contraire conserve ta 1804 au cas où ta clef défaille.
Par ailleurs via le boot-menu, essaies de booter ton hd, t'auras la 1604 qui te proposera win.
Dernière modification par lucmars (Le 14/08/2018, à 18:06)
Gaulois Matter !
Hors ligne
#32 Le 14/08/2018, à 21:58
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
Un nième reboot sans mon disque dur externe, j'otiens ça
geirnaert@geirnaert-K53E:~$ geirnaert@geirnaert-K53E:~$ [ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI"
geirnaert@geirnaert-K53E:~$: command not found
Session non-EFI
geirnaert@geirnaert-K53E:~$
Que dois-je conprendre? Car je n'ai toujours pas le choix windows dans le grub
Merci encore de vous pencher sur mon problème
Hors ligne
#33 Le 15/08/2018, à 08:25
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
De plus je viens de m'apercevoir que je ne peux pas choisir 16.04 si mon disque dur externe n'est pas branché.
Quand je le branche, j'accède à 16.04 et j'ai remarqué une ligne de texte "assuming drive cache: write throuht"
Mais bien sur je n'ai toujours pas la possibilité de windows.
Et je ne sais toujours pas quoi faire!
Dernière modification par geirnaert17 (Le 15/08/2018, à 09:23)
Hors ligne
#34 Le 15/08/2018, à 09:47
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
A tout hasard j'ai refait un boo-info sans mon disque dur extérieur le rapport est à https://paste.ubuntu.com/p/pbmNdrm27b/ .
Je ne sais si ça éclaire ma situation et s'il y quelque chose à faire pour récupérer le choix windows sur mon grub.
Merci aussi de me dire s'il n'y a plus rien à faire.
Hors ligne
#35 Le 15/08/2018, à 09:50
- xubu1957
Re : Installation 18.04 impossible d'accéder à windows comme avant
Bonjour,
Boot-info pour les experts :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
1050624 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt3)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 625,142,447 625,142,447 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,052,671 2,048 BIOS Boot partition
/dev/sda3 1,052,672 625,141,759 624,089,088 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/sda1 541A-42AB vfat
/dev/sda2
/dev/sda3 1e65c419-31ab-4238-8de6-1aaf11af5e1b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 15 09:18 ata-Slimtype_DVD_A_DS8A8SH_3208583_657205418834 -> ../../sr0
lrwxrwxrwx 1 root root 9 Aug 15 09:33 ata-WDC_WD3200BPVT-80JJ5T0_WD-WXB1C12C3044 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 15 09:33 ata-WDC_WD3200BPVT-80JJ5T0_WD-WXB1C12C3044-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 15 09:33 ata-WDC_WD3200BPVT-80JJ5T0_WD-WXB1C12C3044-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 15 09:33 ata-WDC_WD3200BPVT-80JJ5T0_WD-WXB1C12C3044-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Aug 15 09:33 wwn-0x50014ee25bfef92a -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 15 09:33 wwn-0x50014ee25bfef92a-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 15 09:33 wwn-0x50014ee25bfef92a-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 15 09:33 wwn-0x50014ee25bfef92a-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda3 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 2f5e9c44-0848-4ced-ba7e-ffdf9722a188 root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
linux /boot/vmlinuz-4.15.0-32-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-32-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
menuentry 'Ubuntu, with Linux 4.15.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-32-generic-advanced-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-32-generic ...'
linux /boot/vmlinuz-4.15.0-32-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-32-generic-recovery-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-32-generic ...'
linux /boot/vmlinuz-4.15.0-32-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-30-generic-advanced-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-30-generic ...'
linux /boot/vmlinuz-4.15.0-30-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-30-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-30-generic-recovery-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-30-generic ...'
linux /boot/vmlinuz-4.15.0-30-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-30-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-29-generic ...'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-29-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-1e65c419-31ab-4238-8de6-1aaf11af5e1b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
echo 'Loading Linux 4.15.0-29-generic ...'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 1e65c419-31ab-4238-8de6-1aaf11af5e1b
else
search --no-floppy --fs-uuid --set=root 1e65c419-31ab-4238-8de6-1aaf11af5e1b
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
208.672229767 = 224.060100608 boot/grub/grub.cfg 1
162.645103455 = 174.638850048 boot/grub/i386-pc/core.img 1
162.642803192 = 174.636380160 boot/vmlinuz-4.15.0-29-generic 1
4.177608490 = 4.485672960 boot/vmlinuz-4.15.0-30-generic 1
5.017459869 = 5.387456512 boot/vmlinuz-4.15.0-32-generic 1
5.017459869 = 5.387456512 vmlinuz 1
4.177608490 = 4.485672960 vmlinuz.old 1
155.183315277 = 166.626816000 boot/initrd.img-4.15.0-29-generic 4
155.188041687 = 166.631890944 boot/initrd.img-4.15.0-30-generic 2
155.975425720 = 167.477338112 boot/initrd.img-4.15.0-32-generic 3
155.975425720 = 167.477338112 initrd.img 3
155.188041687 = 166.631890944 initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20180815_0933 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=1e65c419-31ab-4238-8de6-1aaf11af5e1b ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda3:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/sda3: UUID="1e65c419-31ab-4238-8de6-1aaf11af5e1b" TYPE="ext4" PARTUUID="5f05b035-a026-4253-acfd-c42d3135ea8d"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="541A-42AB" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="62a2391a-daf5-47da-8618-1bb9af5d6910"
/dev/loop8: TYPE="squashfs"
/dev/sda2: PARTUUID="8700ec5c-19e2-4a62-a115-753f2e14a075"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Linux not detected by os-prober on sda2. Veuillez indiquer ce message à boot.repair@gmail.com
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 25 05:08 grub.d
total 80
-rwxr-xr-x 1 root root 9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root 483 juil. 17 20:13 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 25 05:08 grub.d
total 80
-rwxr-xr-x 1 root root 9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root 483 juil. 17 20:13 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, but it is not setup in EFI-mode for this installed-session.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda3 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, is-biosboot, .
sda : GPT, BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:320GB:scsi:512:4096:gpt:ATA WDC WD3200BPVT-8:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:539MB:1049kB:::bios_grub;
3:539MB:320GB:320GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 87M
loop1 loop squashfs 86,9M
loop2 loop squashfs 14,5M
loop3 loop squashfs 34,7M
loop4 loop squashfs 13M
loop5 loop squashfs 140,9M
loop6 loop squashfs 3,7M
loop7 loop squashfs 2,3M
loop8 loop squashfs 160,8M
sda disk 298,1G
sda1 part vfat 512M
sda2 part 1M
sda3 part ext4 297,6G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/core/5145
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/gnome-logs/37
loop3 1 1 0 /snap/gtk-common-themes/319
loop4 1 1 0 /snap/gnome-characters/103
loop5 1 1 0 /snap/gnome-3-26-1604/70
loop6 1 1 0 /snap/gnome-system-monitor/51
loop7 1 1 0 /snap/gnome-calculator/180
loop8 1 1 0 /snap/mailspring/242
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0
sda3 1 0 0 /
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1875412k,nr_inodes=468853,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=381128k,mode=755)
/dev/sda3 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=36,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14905)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_5145.snap on /snap/core/5145 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/mailspring_242.snap on /snap/mailspring/242 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=381124k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 ab 42 1a 54 4e 4f 20 4e 41 4d 45 20 20 |..).B.TNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 373M 1.6M 371M 1% /run
/dev/sda3 ext4 292G 7.4G 270G 3% /
tmpfs tmpfs 1.9G 42M 1.8G 3% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop2 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop0 squashfs 87M 87M 0 100% /snap/core/5145
/dev/loop3 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/loop4 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop5 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop6 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/loop7 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop8 squashfs 161M 161M 0 100% /snap/mailspring/242
tmpfs tmpfs 373M 28K 373M 1% /run/user/1000
/dev/sda1 vfat 511M 4.7M 507M 1% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/loop0: 87 MiB, 91160576 bytes, 178048 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 745DCE28-5F87-428E-91E9-FED88ECBEEB4
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1052671 2048 1M BIOS boot
/dev/sda3 1052672 625141759 624089088 297.6G Linux filesystem
Disk /dev/loop8: 160.8 MiB, 168591360 bytes, 329280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#36 Le 15/08/2018, à 10:32
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
Nouveau !!
Maintenant avec ou sans disque dur externe au démarrage le grub ( 2.02) ne me donne que le choix 18.04.
Hors ligne
#37 Le 15/08/2018, à 11:33
- Babdu89
Re : Installation 18.04 impossible d'accéder à windows comme avant
Bonjour.
Maintenant avec ou sans disque dur externe au démarrage le grub ( 2.02) ne me donne que le choix 18.04.
Normal, puisque les autres systèmes ne sont pas dans le fichier grub.cfg de la 18.04, on devrait les voir dans cette rubrique.
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
Dernier boot info, on voit;
Seul le disque interne est présent. /dev/sda
La machine démarre bien en mode Bios Legacy.
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, but it is not setup in EFI-mode for this installed-session.
SecureBoot disabled.
Le 18.04 est installé en mode Bios_Legacy sur le /sda . avec une partition Bios-boot /sda2 qui contient le cor.img de la 18.04. Çà permet un démarrage correcte de la 18.04 sur un disque en GPT.
Il y a encore la partition boot-efi /sda1 qui a certainement servi à un moment à faire démarrer un Ubuntu installé en UEFI.( le 18.04 je pense, on voit çà dans le boot info précédent. Elle ne sert plus à rien pour un démarrage en mode Bios_Legacy.)
Si l'installation sur le disque externe /dev/sdb n'a pas changé.
La 16.04 était installé en Bios_Legacy.
Brancher le disque externe, redémarrer sur la 18.04, et faire une mise à jour de Grub
sudo update-grub
Poster le retour terminal, pour voir ce qui est fait.
Redémarrer la machine, sans rien toucher dans le Bios.
Normalement le menu Grub doit s'afficher, c'est celui de la 18.04.
Les 18.04 et 16.04 devraient démarrer.
Mais pas le Windows qui est sur le disque externe. Windows ne sait pas démarrer sur support USB
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#38 Le 15/08/2018, à 22:00
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
geirnaert@geirnaert-K53E:~$ sudo update-grub
[sudo] Mot de passe de geirnaert :
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-29-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-29-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Ubuntu 16.04.3 LTS (16.04) trouvé sur /dev/sdb6
fait
geirnaert@geirnaert-K53E:~$
Je relance et c'est comme tu as écrit: merci beaucoup !
As tu une idée pour accéder à Windows sur mon disque externe ?
Dernière modification par geirnaert17 (Le 15/08/2018, à 22:09)
Hors ligne
#39 Le 15/08/2018, à 23:08
- Babdu89
Re : Installation 18.04 impossible d'accéder à windows comme avant
Bonsoir.
As tu une idée pour accéder à Windows sur mon disque externe ?
Windows installé sur support usb ne sait pas démarrer depuis un support externe USB.
Normalement tu dois avoir accès aux fichiers de Windows, mais il ne démarrera pas.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#40 Le 15/08/2018, à 23:12
- geirnaert17
Re : Installation 18.04 impossible d'accéder à windows comme avant
Windows installé sur support usb ne sait pas démarrer depuis un support externe USB.
Normalement tu dois avoir accès aux fichiers de Windows, mais il ne démarrera pas.
Même en trafiquant le Bios ?
Hors ligne
#41 Le 15/08/2018, à 23:49
- Babdu89
Re : Installation 18.04 impossible d'accéder à windows comme avant
Même en trafiquant le Bios ?
Ce n'est pas une question de Bios, mais bien que Windows ne sait pas démarrer depuis un support usb.
Le disque où est ton Windows, est soit un disque où tu as copié la partition Windows depuis un disque interne. Ou un disque interne où il y avait un Windows installé, que tu as transformé en disque externe (mis dans un boîtier usb.).
Chez moi pour sauvegardé un Windows XP, j'ai copié la partition système avec Gparted sur un disque dur USB.
Même en réinstallant le chargeur de démarrage de Windows sur le disque USB, pour tester. Windows ne démarre pas.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#42 Le 16/08/2018, à 20:15
- ikewdu
Re : Installation 18.04 impossible d'accéder à windows comme avant
Salut,
Excuse moi, la seule chose que j'ai compris c'est que mon windows est toujours dans la machine.
Et il serait où, ce Windows ? Je ne vois en tout cas nulle part sur sda ou sdb des fichiers de démarrage pour le lancer, tant en legacy qu'en uefi. Et dans le second rapport boot-info, il n'y a même plus de sdb...
Rebranche sdb, et inspecte la partition sdb1. Si les dossiers Windows n'y sont pas, fais une croix sur ton Windows.
Edit. Tu as juste transformé une installation correcte d'Ubuntu en uefi en une installation bâtarde qui boote en Legacy sur un disque gpt sur lequel une partition bios-boot joue maintenant le rôle de mbr :
BIOS is EFI-compatible, but it is not setup in EFI-mode for this installed-session.
Drive: sda :Disklabel type: gpt
sda2: File system: BIOS Boot partition
Je ne vois pas trop le bénéfice de cette opération...
Dernière modification par ikewdu (Le 17/08/2018, à 09:41)
Hors ligne