#1 Le 18/01/2018, à 08:32
- m.s0
[Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Bonjour,
Avec le portable asus strix, il est iniutile de taper sur une touche f., ça ne fonctionnera pas.
Voici ce qu'il faut faire:
Au démarrage, appuyez sur la touche f2 pour aller dans le bios afin de booter sur le média que vous avez inséré. Puis appuyer sur f10 pour démarrer.
On se retrouve dans un menu (il s'agit de grub).
Positionnez la barre de surbrillance sur « install ubuntu » et appuyez sur la touche 'e'.
Dans cet écran, ajouter à la fin de la ligne qui commence par « linux », mais avant les tirets, la mention acpi=off. puis appuyez sur f10
laissez-vous guider pendant l'installation.
redémarrez comme demandé (vous devrez ensuite appuyer sur on/off car l'asus strix n'a pas le support acpi)
cette fois le système ne fonctionnera pas.
redémarrez encore (touche on/off). Comme l'ordinateur n'a pas démarré comme il faut, on se retrouvera encore dans grub.
vous avez 30 secondes pour placer la barre sur « ubuntu » et appuyer sur la touche 'e'.
À la fin de la ligne qui commence par linux, mais avant $vt_handoff, ajoutez acpi=off.
le système démarera (cette fois).
éditez avec un éditeur de texte (gedit, nano, vi ou autre) le fichier /etc/default/grub
$ sudo gedit /etc/default/grub
ajoutez acpi=off sur cette ligne
GRUB_CMDLINE_LINUX_DEFAULT= "quiet splash acpi=off"
puis dans le terminal, tapez ceci (très important, c'est pour tenir compte des modifications)
$ sudo update-grub
ça devrait maintenant aller
Dernière modification par m.s0 (Le 01/04/2019, à 10:57)
Hors ligne
#2 Le 18/01/2018, à 10:49
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Bonjour,
Tu mentionnes dans le post #1 "le portable asus strix". Cette désignation est trop vague. Je te prie de donner le nom complet du modèle avec lequel tu as dû appliquer la procédure que tu as détaillée dans le post #1.
Hors ligne
#3 Le 18/01/2018, à 15:13
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
alors voila ce qui est écrit sur le bon de livraison:
NOTEBOOK 17 FHD 300 NITS IPS - FX753VD-GC261
intel core i5 7th generation
nvidia GEFORCE GTX
Hors ligne
#4 Le 18/01/2018, à 15:40
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Dans ce que tu as indiqué, la partie "FHD 300 NITS IPS" est relative à l'écran. Ce qui m'intéresse, c'est "FX753VD-GC261" qui indique que ton modèle est le Asus FX753VD-GC261 visible sur cette page : https://www.rueducommerce.fr/produit/as … r-30188458
modèle équipé d'un processeur Intel Core i5-7300HQ et d'une carte graphique dédiée NVIDIA GeForce GTX 1050.
Si j'en crois les exemples d'installation de modèles équipée de ces deux composants principaux, le paramètre de noyau acpi=off que tu proposes dans le post #1 n'est pas nécessaire pour installer dans ce modèle. Si tu fais un essai en session live, tu verras que c'est le paramètre de noyau nomodeset qui est nécessaire.
Hors ligne
#5 Le 18/01/2018, à 15:42
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
pourtant ça marche et ça ne marche pas sans.
j'ai essayé nomodeset et ça ne marchait pas.
Dernière modification par m.s0 (Le 18/01/2018, à 15:43)
Hors ligne
#6 Le 18/01/2018, à 16:16
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
j'ai essayé nomodeset et ça ne marchait pas.
Dans ce cas, j'ai eu tord de douter. Mais ce n'est jamais bon signe quand on est obligé d'utiliser ce paramètre acpi=off pour parvenir à démarrer en session live, c'est pourquoi j'ai proposé nomodeset. Si tu as réussi à faire l'installation sur disque dur de Ubuntu 17.10.1, je serais intéressé si tu peux faire un Boot-Info depuis une session de ton Ubuntu installé (en suivant les indications de 1.1 Cas où au moins un ubuntu installé sur disque est opérationnel). Tu donneras l'URL de ton Boot-Info dans ta réponse.
Hors ligne
#7 Le 18/01/2018, à 20:42
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
http://paste.ubuntu.com/26412220/
c'est ça un boot-info?
y a-t-il autre chose que je dois faire?
Hors ligne
#8 Le 19/01/2018, à 10:07
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
129024 of the same hard drive for core.img. core.img is at this location
and looks for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos part_gpt search_fs_type search_label search_fs_file
extcmd search_fs_uuid search biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search --set=root --label ostree --hint $bootdev,
set prefix=($root)/boot/grub
insmod probe
insmod normal
probe -u $root --set=rootuuid
export rootuuid
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 2048.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/MokManager.efi
/EFI/BOOT/bootx64.efi /EFI/BOOT/fbx64.efi
/EFI/BOOT/grubx64.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sda4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 129,023 126,976 EFI System partition
/dev/sda2 129,024 131,071 2,048 BIOS Boot partition
/dev/sda3 131,072 195,442,687 195,311,616 Data partition (Linux)
/dev/sda4 195,442,688 227,442,687 32,000,000 Swap partition (Linux)
/dev/sda5 227,442,688 1,953,523,711 1,726,081,024 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 E448-EAC8 vfat
/dev/sda2
/dev/sda3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ext4
/dev/sda4 fb3821ab-bcc0-4352-b8a0-477ac15e05a7 swap
/dev/sda5 61864c4f-a1f5-4e95-a342-6adea48cf83b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 18 19:37 ata-HGST_HTS721010A9E630_JR1000BN2MM19E-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Jan 18 19:27 ata-SlimtypeDVD_A_DA8AESH_3508A17_496708532751 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 18 19:37 wwn-0x5000cca8d8e5198a -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 18 19:37 wwn-0x5000cca8d8e5198a-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 18 19:37 wwn-0x5000cca8d8e5198a-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 18 19:37 wwn-0x5000cca8d8e5198a-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 18 19:37 wwn-0x5000cca8d8e5198a-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 18 19:37 wwn-0x5000cca8d8e5198a-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda3 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda5 /home ext4 (rw,relatime,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c root hd0,gpt3
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
linux /boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off $vt_handoff
initrd /boot/initrd.img-4.13.0-25-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
menuentry 'Ubuntu, avec Linux 4.13.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-25-generic-advanced-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
echo 'Chargement de Linux 4.13.0-25-generic…'
linux /boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-25-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-25-generic-recovery-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
echo 'Chargement de Linux 4.13.0-25-generic…'
linux /boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-25-generic
}
menuentry 'Ubuntu, avec Linux 4.13.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-21-generic-advanced-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
echo 'Chargement de Linux 4.13.0-21-generic…'
linux /boot/vmlinuz-4.13.0-21-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-21-generic-recovery-a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
else
search --no-floppy --fs-uuid --set=root a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c
fi
echo 'Chargement de Linux 4.13.0-21-generic…'
linux /boot/vmlinuz-4.13.0-21-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-21-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=E448-EAC8 /boot/efi vfat umask=0077 0 1
# /home was on /dev/sda5 during installation
UUID=61864c4f-a1f5-4e95-a342-6adea48cf83b /home ext4 defaults 0 2
# swap was on /dev/sda4 during installation
UUID=fb3821ab-bcc0-4352-b8a0-477ac15e05a7 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
22.259304047 = 23.900745728 boot/grub/grub.cfg 2
1.140094757 = 1.224167424 boot/vmlinuz-4.13.0-21-generic 1
12.234531403 = 13.136728064 boot/vmlinuz-4.13.0-21-generic.efi.signed 1
1.749477386 = 1.878487040 boot/vmlinuz-4.13.0-25-generic 1
1.979946136 = 2.125950976 boot/vmlinuz-4.13.0-25-generic.efi.signed 2
1.749477386 = 1.878487040 vmlinuz 1
1.140094757 = 1.224167424 vmlinuz.old 1
1.453514099 = 1.560698880 boot/initrd.img-4.13.0-21-generic 3
1.976558685 = 2.122313728 boot/initrd.img-4.13.0-25-generic 3
1.976558685 = 2.122313728 initrd.img 3
1.453514099 = 1.560698880 initrd.img.old 3
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
ADDITIONAL INFORMATION :
=================== log of boot-info 20180118_1937 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 17.10, artful, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off vt.handoff=7
=================== os-prober:
/dev/sda3:L'OS actuellement utilisé - Ubuntu 17.10 CurrentSession:linux
=================== blkid:
/dev/sda1: SEC_TYPE="msdos" UUID="E448-EAC8" TYPE="vfat" PARTUUID="87dd6af9-73a2-4d00-a9d4-41c3bf96ad9f"
/dev/sda3: UUID="a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c" TYPE="ext4" PARTUUID="758d5d79-f58a-46b1-8cf6-561b2c33388e"
/dev/sda4: UUID="fb3821ab-bcc0-4352-b8a0-477ac15e05a7" TYPE="swap" PARTUUID="4c6e64f2-3722-4298-aa6f-1b6ae88daded"
/dev/sda5: UUID="61864c4f-a1f5-4e95-a342-6adea48cf83b" TYPE="ext4" PARTUUID="743bcbbc-3136-4e01-b894-c0cb258b0a6d"
/dev/sda2: PARTUUID="9a0b58f2-cc59-4583-b315-fcf30e80d618"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Linux not detected by os-prober on sda2. Veuillez indiquer ce message à boot.repair@gmail.com
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 5 21:40 grub.d
total 80
-rwxr-xr-x 1 root root 9783 oct. 12 15:41 00_header
-rwxr-xr-x 1 root root 6258 avril 24 2017 05_debian_theme
-rwxr-xr-x 1 root root 12676 oct. 12 15:41 10_linux
-rwxr-xr-x 1 root root 11281 oct. 12 15:41 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 12 15:41 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 12 15:41 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 12 15:41 40_custom
-rwxr-xr-x 1 root root 216 oct. 12 15:41 41_custom
-rw-r--r-- 1 root root 483 oct. 12 15:41 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda3: UUID=E448-EAC8 (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/grubx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/MokManager.efi
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 5 21:40 grub.d
total 80
-rwxr-xr-x 1 root root 9783 oct. 12 15:41 00_header
-rwxr-xr-x 1 root root 6258 avril 24 2017 05_debian_theme
-rwxr-xr-x 1 root root 12676 oct. 12 15:41 10_linux
-rwxr-xr-x 1 root root 11281 oct. 12 15:41 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 12 15:41 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 12 15:41 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 12 15:41 40_custom
-rwxr-xr-x 1 root root 216 oct. 12 15:41 41_custom
-rw-r--r-- 1 root root 483 oct. 12 15:41 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=E448-EAC8 (sda1)
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001,0002,0003,0004,0005
Boot0000* ubuntu HD(1,GPT,87dd6af9-73a2-4d00-a9d4-41c3bf96ad9f,0x800,0x1f000)/File(EFIubuntushimx64.efi)
Boot0001* UEFI OS HD(1,GPT,87dd6af9-73a2-4d00-a9d4-41c3bf96ad9f,0x800,0x1f000)/File(EFIBOOTBOOTX64.EFI)..BO
Boot0002* UEFI: SlimtypeDVD A DA8AESH PciRoot(0x0)/Pci(0x17,0x0)/Sata(2,65535,0)/CDROM(1,0xafc07,0x1200)..BO
Boot0003* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0004* UEFI:Removable Device BBS(130,,0x0)
Boot0005* UEFI:Network Device BBS(131,,0x0)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda3 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, is-biosboot, .
sda : GPT, BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA HGST HTS721010A9:;
1:1049kB:66.1MB:65.0MB:fat16::boot, esp;
2:66.1MB:67.1MB:1049kB:::bios_grub;
3:67.1MB:100GB:100GB:ext4::;
4:100GB:116GB:16.4GB:linux-swap(v1)::;
5:116GB:1000GB:884GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931,5G
sda1 part vfat 62M
sda2 part 1M
sda3 part ext4 93,1G
sda4 part swap 15,3G
sda5 part ext4 823,1G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /boot/efi
sda2 1 0 0
sda3 1 0 0 /
sda4 1 0 0 [SWAP]
sda5 1 0 0 /home
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3998964k,nr_inodes=999741,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=805200k,mode=755)
/dev/sda3 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12692)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda5 on /home type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/121 type tmpfs (rw,nosuid,nodev,relatime,size=805196k,mode=700,uid=121,gid=127)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=805196k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 3c 90 6d 6b 66 73 2e 66 61 74 00 02 04 01 00 |.<.mkfs.fat.....|
00000010 02 00 02 00 00 f8 7c 00 3f 00 ff 00 00 00 00 00 |......|.?.......|
00000020 00 f0 01 00 80 01 29 c8 ea 48 e4 4e 4f 20 4e 41 |......)..H.NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 36 20 20 20 0e 1f |ME FAT16 ..|
00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 787M 9.7M 777M 2% /run
/dev/sda3 ext4 92G 3.9G 83G 5% /
tmpfs tmpfs 3.9G 46M 3.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 vfat 62M 12M 51M 19% /boot/efi
/dev/sda5 ext4 810G 9.2G 759G 2% /home
tmpfs tmpfs 787M 16K 787M 1% /run/user/121
tmpfs tmpfs 787M 2.1M 785M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 6ACE9180-55A0-49A6-BB89-BF4A93D40B75
Device Start End Sectors Size Type
/dev/sda1 2048 129023 126976 62M EFI System
/dev/sda2 129024 131071 2048 1M BIOS boot
/dev/sda3 131072 195442687 195311616 93.1G Linux filesystem
/dev/sda4 195442688 227442687 32000000 15.3G Linux swap
/dev/sda5 227442688 1953523711 1726081024 823.1G Linux filesystem
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda3, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
La ligne suivante - extraite de ce Boot-Info - atteste que le démarrage a été fait avec le paramètre de noyau acpi=off :
BOOT_IMAGE=/boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off vt.handoff=7
Je te prie de faire la manip suivante :
1) presser la touche SHIFT au démarrage de l'ordi pour faire apparaître le menu Grub
2) sélectionner "Options avancées pour Ubuntu" et valider ce choix par la touche Entrée pour faire apparaître le sous-menu
3) sélectionner "Ubuntu, with Linux 4.13.0-25-generic (recovery mode)" qui est en principe la 2ème ligne du sous-menu, et valider ce choix par la touche Entrée.
4) dans le "Menu de récupération" qui doit apparaître, sélectionner "resume" et valider ce choix par la touche Entrée. Ubuntu doit se lancer dans une sorte de mode d'affichage sans échec, pas très beau mais normalement fonctionnel. Raconte si ça se passe bien comme ça.
Dernière modification par malbo (Le 19/01/2018, à 11:01)
Hors ligne
#9 Le 19/01/2018, à 15:22
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
La ligne suivante - extraite de ce Boot-Info - atteste que le démarrage a été fait avec le paramètre de noyau acpi=off :
BOOT_IMAGE=/boot/vmlinuz-4.13.0-25-generic.efi.signed root=UUID=a1e0e0ff-a4ff-48c1-8a54-a1ef3d637d3c ro quiet splash acpi=off vt.handoff=7
c'est moi qui ai ajouter le acpi=off en éditant la ligne de commande par la touche 'e', dans grub
je l'ai aussi ajouté dans /etc/default/grub, puis uptdate-grub
Dernière modification par m.s0 (Le 19/01/2018, à 15:24)
Hors ligne
#10 Le 19/01/2018, à 15:38
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
OK peux-tu faire la manip que je t'ai demandée à la fin du post #8 ?
Dernière modification par malbo (Le 19/01/2018, à 15:38)
Hors ligne
#11 Le 19/01/2018, à 16:48
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
j'ai fait la manip mais pour obtenir grub il faut éteindre et rallumer pendant le démarrage.
Tu as raison, si on fait comme ça, on obtient une petite icône représentant la batterie.
pour éviter de chercher grub à chaque démarrage, il faut mettre cette ligne dans /etc/default/grub:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
Dernière modification par m.s0 (Le 19/01/2018, à 16:48)
Hors ligne
#12 Le 19/01/2018, à 17:01
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
voici mon dernier /etc/default/grub:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Hors ligne
#13 Le 19/01/2018, à 17:06
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
pour éviter de chercher grub à chaque démarrage, il faut mettre cette ligne dans /etc/default/grub:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
Je ne crois pas du tout que ce soit ce qu'il faut faire. Je crois qu'il faut mettre :
"GRUB_CMDLINE_LINUX_DEFAULT= "quiet splash" puis mettre à jour Grub en passant la commande "sudo update-grub"
puis démarrer en rajouter le paramètre nomodeset "à la volée" comme j'explique là : https://forum.ubuntu-fr.org/viewtopic.p … 1#p9820021
Arrivé dans la session Ubuntu par ce moyen, il faut installer le driver adapté à ta carte comme l'a fait kid24 pour sa gtx 1050 dans la discussion suivante : https://forum.ubuntu-fr.org/viewtopic.php?id=2003443
Après cela, plus besoin d'ajouter nomodeset à la volée parce que le driver adapté gérera correctement ta carte graphique.
Dernière modification par malbo (Le 19/01/2018, à 17:08)
Hors ligne
#14 Le 19/01/2018, à 17:21
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
j'ai fait la manip mais j'ai ajouté
sudo apt upgrade
sinon
$ ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001C8Dsv00001043sd00001590bc03sc02i00
vendor : NVIDIA Corporation
model : GP107M [GeForce GTX 1050 Mobile]
driver : nvidia-384 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro free
je reviens après le redémarrage pour voir si c'est bon.
Hors ligne
#15 Le 19/01/2018, à 17:27
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
c'est bon ça marche et j'ai l'icône de la batterie
merci bien pour l'info
Hors ligne
#16 Le 19/01/2018, à 17:30
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Hé, c'est pas suffisant. La commande "ubuntu-drivers devices", c'est juste pour connaître le driver adapté à ta carte. Pour l'installer, il faut passer par gestionnaire de pilotes proprietaires et cocher Utilisation de "NVIDIA Binary Driver..." comme sur cette vue.
Hors ligne
#17 Le 19/01/2018, à 18:06
- m.s0
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
voila c'est fait
mais il ne vaudrait pas mieux d'utiliser un pilote libre?
Hors ligne
#18 Le 19/01/2018, à 19:29
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
mais il ne vaudrait pas mieux d'utiliser un pilote libre?
Je ne suis pas spécialiste en pb graphique mais je crois qu'il n'y a pas de pilote libre qui puisse gérer correctement ta carte graphique.
EDIT : je viens d'ajouter ton modèle FX753VD-GC261 dans la Liste des portables « Asus »
Il y a des détails sur les composants principaux de ce modèle dans le post #4 plus haut
Dernière modification par malbo (Le 19/01/2018, à 19:43)
Hors ligne
#19 Le 25/01/2018, à 08:45
- malbo
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
@m.s0 : je te prie de fermer la discussion en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Hors ligne
#20 Le 31/03/2019, à 20:58
- jeanmy
Re : [Résolu] comment installer ubuntu 17.10.1 sur un portable asus strix
Bonjour,
Pour info, la méthode est aussi valable pour un ASUS FX504G (plus exactement FX504GD.312).
- Lancement du LiveUSB (Kubuntu 18.04 pour l'exemple) avec le paramètre nomodeset à la volée
- Redémarrage avec le paramètre nomodeset à la volée
- Installation des pilotes
- Redémarrage normal
La carte Wifi n'est pas prise en charge (modèle RTL8821CE). Avec la méthode expliquée ici tout est fonctionnel.
sudo apt-get install linux-headers-$(uname -r) build-essential dkms git
git clone git://github.com/tomaspinho/rtl8821ce
cd rtl8821ce
chmod +x dkms-install.sh
chmod +x dkms-remove.sh
sudo ./dkms-install.sh
Cordialement
Hors ligne