#51 Le 10/01/2018, à 12:08
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Mince sur le site officiel il me demande de l'acheter avant de pouvoir le télécharger. T'as un bon lien ?
Et puis c'est toujours le même soucis, je suis sur Ubuntu là, et j'arrive pas à trouver de logiciel pour clé la clé usb bootable pour Windows..
Dur dur de pas perdre patience devant ce casse-tête en tout cas.
Yaurait pas moyen d'envisager une autre possibilité .. ^^
Genre dans le post que tu me donnais plus tôt, il installe ubuntu sans grub au début (et vu que c'est ça qui buguait..)
Hors ligne
#52 Le 10/01/2018, à 12:45
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
https://www.microsoft.com/en-us/softwar … ndows10ISO
Je sais pas si c'est la version familiale mais j'ai pris celle-ci en 64bits.
Mince, je sais pas.
Je suis sur Gparted en liveusb là. Faut que j'enlève la partition EFI System Partition, si je veux faire une clean install de Windows 10 ?
Pareil, quand est-il du linux-swap ?
Dernière modification par quentind (Le 10/01/2018, à 12:50)
Hors ligne
#53 Le 10/01/2018, à 12:57
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
La partition EFi peut être enlevée car windows sait la créer. le linux swap doit être enlevé
Mais l'installation de windows devrait proposer un choix d'installer sur la totalité du disque et s'occuper de ce ménage.
je suis surpris qu'il te demande un N° de licence à partir du lien que tu viens d'indiquer (peut-être pour la version entreprise?) mas pas pour la version familliale
Ils ont manifestement revu le site de téléchargement depuis 15 jours ( dans le bon sens?)
A) windows 10
B) French
C) 64 bits
On ne voit plus les 4 déclinaisons ( c'est peut-être maintenant dans le même package avec sélection à l'installation?.....
Il n'y a pas de raison que tu ne puisses pas télécharger.
Dernière modification par ?? (Le 10/01/2018, à 15:55)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#54 Le 10/01/2018, à 13:08
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Oui non avec le lien que j'ai donné, j'ai pu téléchargé l'iso. Désolé j'ai pas corrigé mon post précédent.
Je suis en cours de télécharger l'iso une 3eme fois.
Je vérifierais tout ça avec ce que tu m'as indiqué.
Et reste à trouver à faire une clé windows bootable depuis mon linux.
Entre temps j'ai tenté l'install de mon actuel clé Windows sur tout le disque dur, mais j'ai eu le droit à la même erreur..
Hors ligne
#55 Le 10/01/2018, à 13:30
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Pour faire une clé bootable
Tu formates la clé en FAT32
Tu ouvres l'ISO avec le logiciel "Monteur d'image ISO" . Je pense qu'il est aussi présent dans la live-USB
Puis copier/coller des 3 ou 4 fichiers et 3 ou 4 répertoires présents dans la partition FAT32
Tu termines en éjectant très proprement la clé USB afin d'être certain que toutes les écritures ont été parfaitement faites.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#56 Le 10/01/2018, à 15:06
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Youhou ! L'installation de Windows 10 s'est bien passée !!
ET c'était une expérience intéressante de voir une install Windows ^^ (avec toutes les demandes d'accès, d'autorisations, de publicité..)
Bref, je vais pouvoir continuer la procédure que tu m'avais donné, en téléchargeant les fichiers et voir si ça met à jour le bios !
PS : pour info, j'avais fait ma clé avec unetbootin, en la formatant bien en fat32, en vérifiant bien l'iso de windows, et en supprimant toutes mes anciennes partition et en laissant Windows gérer son bousin.
Dernière modification par quentind (Le 10/01/2018, à 15:07)
Hors ligne
#57 Le 10/01/2018, à 15:47
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Yes, bon signe !! Les commandes
sudo efibootmgr -c -d /dev/sdb -p 1 -L "Refind" -l "\EFI\refind\refind_x64.efi"
sudo efibootmgr -v
sont bien passées !
Résultat :
sudo efibootmgr -c -d /dev/sdb -p 1 -L "Refind" -l "\EFI\refind\refind_x64.efi"
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0002,0001,0000,2001,2002,2003
Boot0000* Linux
Boot0001* Windows Boot Manager
Boot0003* Unknown Device:
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Boot0002* Refind
ubuntu@ubuntu:~$ sudo efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0002,0001,0000,2001,2002,2003
Boot0000* Linux HD(1,MBR,0x4294967283,0x800,0x775000)/File(\EFI\Boot\grubx64.efi)RC
Boot0001* Windows Boot Manager HD(2,GPT,416e6f1c-2f4e-4886-9fa0-d951df848036,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* Refind HD(1,GPT,370798ac-5dd7-4283-b9e4-9774cffe1c51,0x800,0xf9800)/File(\EFI\refind\refind_x64.efi)
Boot0003* Unknown Device: HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
Euh mais du coup faut que je réinstalle Ubuntu vu que j'ai tout enlevé, on est d'accord ??
Dernière modification par quentind (Le 10/01/2018, à 15:51)
Hors ligne
#58 Le 10/01/2018, à 16:02
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Bon, Windows installé, le bios mis à jour et la commande EFIBOOTMGR fonctionnant
Comme tu le dit, Il ne te reste plus qu'à installer ubuntu.. Libre à toi de supprimer windows ou de le rétrécir car il me semble que tu as pas mal de place dans ton disque dur.
Tu peux faire cela avec GPARTED puisque c'est un windows10 EFI.
Notes que comme REFIND est déjà installé, tu peux aussi l'utiliser pour détecter le boot en sélectionnant la clé USB
Cela te permettra de redécouvrir son fonctionnement.
Dernière modification par ?? (Le 10/01/2018, à 16:06)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#59 Le 10/01/2018, à 16:06
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Laisser Windows ne va-t-il pas poser de soucis inutilement ?
Et si je lui laisse une place, il faudra choisir au démarrage entre les deux ?
Oui pour refind, je vais voir ça
Dernière modification par quentind (Le 10/01/2018, à 16:07)
Hors ligne
#60 Le 10/01/2018, à 16:10
- regine ducloy
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Après mise à jour de logiciels ce midi sur Ubuntu 16-4, au redémarrage pour continuer, blocage sur écran coloré vierge avant demande du mot de passe ; echap impossible. Suis retourné sur version antérieure pour ce SOS.
Même problème aux essais suivants.
PS Je ne suis pas informaticien mais je j'arrive en général à suivre les instructions.
Merci d'avance
Hors ligne
#61 Le 10/01/2018, à 16:21
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Bonjour regine ducloy
Ton problème n'a strictement rien à voir avec celui en cours, je te prie d'ouvrir une nouvelle discussion comme tu as su le faire il y a 4 ans.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#62 Le 10/01/2018, à 16:51
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Donc je me suis mis sur la liveusb, j'ai lancé l'install et..
elle s'est bien passé !!
Malheureusement cela semble jamais simple, et en rédémarrant et en enlevant la clé usb..
"No Bootable Device" avec un beau logo de disque dur et d'une loupe.
J'ai changé l'ordre du boot dans le bios en mettant le disque dur, mais ça n'a rien changé.
Je pense pas que refind se lance d'ailleurs ??
Hors ligne
#63 Le 10/01/2018, à 16:54
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Ah, tu me disais
"Sinon tu utiliseras boot-repair pour finir l'installation du grub."
Ce que je n'ai pas fait. Je m'y attèle
Hors ligne
#64 Le 10/01/2018, à 16:57
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Penses à un boot-info... et surtout à notre sauveur car ton contexte est maintenant probablement totalement classique.
Inutile de faire une réparation, Tu as dit que ton installation n'avait pas eu de problème.
Dans l'ensemble, on ne lance qu'une réparation après avoir consulté le boot-info pour avoir une idée de la pertinence de la réparation proposée.
Dernière modification par ?? (Le 10/01/2018, à 17:06)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#65 Le 10/01/2018, à 17:03
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Yes je venais de retrouver ce lien !
Je te donne le boot-info et tu peux me dire si tout va bien et que je peux continuer la procédure !
Et je fais un boot-repair en premier ou la manip du "sauveur" en premier ?
Hors ligne
#66 Le 10/01/2018, à 17:05
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Mon boot-info actuel :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 20151222............................................@.....2....0............A20 gate n
Boot sector info: Syslinux looks at sector 3034316 of /dev/sda1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 7,821,311 7,819,264 c W95 FAT32 (LBA)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sdb2 1,050,624 1,945,495,551 1,944,444,928 Data partition (Linux)
/dev/sdb3 1,945,495,552 1,953,523,711 8,028,160 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9AC7-318F vfat
/dev/sdb1 0FA3-429A vfat
/dev/sdb2 4d5f68d2-8f0e-4344-895b-f6238f4951f1 ext4
/dev/sdb3 fd12e80c-58ec-469c-9732-cf7cf0febd80 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 10 14:54 ata-Slimtype_DVD_A_DA8AESH_0080F0116471816FF101 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 15:03 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jan 10 15:02 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 15:02 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 10 15:03 wwn-0x5000039722a86368 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 15:03 wwn-0x5000039722a86368-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sda1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? libcom32.c32 1
?? = ?? libutil.c32 1
?? = ?? menu.c32 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
libcom32.c32 : not a COM32/COM32R module
libutil.c32 : not a COM32/COM32R module
menu.c32 : not a COM32/COM32R module
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-109-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
menuentry 'Ubuntu, avec Linux 4.4.0-109-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-109-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-109-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=0FA3-429A /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdb3 during installation
UUID=fd12e80c-58ec-469c-9732-cf7cf0febd80 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
162.836875916 = 174.844764160 boot/grub/grub.cfg 1
2.280269623 = 2.448420864 boot/vmlinuz-4.4.0-109-generic 1
2.409934998 = 2.587648000 boot/vmlinuz-4.4.0-109-generic.efi.signed 1
1.597381592 = 1.715175424 boot/vmlinuz-4.4.0-31-generic 1
1.597381592 = 1.715175424 vmlinuz 1
2.946910858 = 3.164221440 boot/initrd.img-4.4.0-109-generic 4
2.699634552 = 2.898710528 boot/initrd.img-4.4.0-31-generic 1
2.699634552 = 2.898710528 initrd.img 1
2.699634552 = 2.898710528 initrd.img.old 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/12847/mounts) leaked on lvs invocation. Parent PID 20517: bash
File descriptor 63 (pipe:[57841]) leaked on lvs invocation. Parent PID 20517: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20180110_1502 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash acpi=off nomodeset ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sdb2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="9AC7-318F" TYPE="vfat" PARTUUID="0005f9f3-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="0FA3-429A" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="80eaea41-25c2-45d4-8d12-c3a8f2313a11"
/dev/sdb2: UUID="4d5f68d2-8f0e-4344-895b-f6238f4951f1" TYPE="ext4" PARTUUID="a7659263-32f4-4350-bb3c-aa9c5667404b"
/dev/sdb3: UUID="fd12e80c-58ec-469c-9732-cf7cf0febd80" TYPE="swap" PARTUUID="429ca37f-1653-4cf8-9279-68aa7d1ad308"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sdb2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jan 10 14:33 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Dec 12 22:48 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sdb2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb2: UUID=0FA3-429A (sdb1)
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* Unknown Device: HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0001* Linux HD(1,MBR,0x4294967283,0x800,0x775000)/File(EFIBootgrubx64.efi)RC
Boot0002* ubuntu HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0003* Unknown Device: HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:4005MB:scsi:512:512:msdos:SanDisk Cruzer:;
1:1049kB:4005MB:4003MB:fat32::boot, lba;
BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:4110MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 3.7G
sda1 part vfat 3.7G
sdb disk 931.5G
sdb1 part vfat 512M
sdb2 part ext4 927.2G
sdb3 part swap 3.8G
sr0 rom 1024M
loop0 loop squashfs 1.4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 1 running
sda1 1 0 1 /cdrom
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 [SWAP]
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1918996k,nr_inodes=479749,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386728k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=386728k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 9a 42 a3 0f 4e 4f 20 4e 41 4d 45 20 20 |..).B..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 378M 6.0M 372M 2% /run
/dev/sda1 vfat 3.8G 1.5G 2.3G 39% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 1.9G 85M 1.8G 5% /
tmpfs tmpfs 1.9G 252K 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 300K 1.9G 1% /tmp
tmpfs tmpfs 378M 100K 378M 1% /run/user/999
/dev/sdb1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 913G 4.3G 862G 1% /mnt/boot-sav/sdb2
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0005f9f3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 7821311 7819264 3.7G c W95 FAT32 (LBA)
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FEF83830-080F-497C-84BB-1D2A25600BD6
Device Start End Sectors Size Type
/dev/sdb1 2048 1050623 1048576 512M EFI System
/dev/sdb2 1050624 1945495551 1944444928 927.2G Linux filesystem
/dev/sdb3 1945495552 1953523711 8028160 3.8G Linux swap
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options: sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdb1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Hors ligne
#67 Le 10/01/2018, à 17:08
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
le boot-info dit que le Gesbuklu est utile
Boot0000* Unknown Device: HD(1,GPT,80eaea41-25c2-45d4-8d12-
Boot0003* Unknown Device: HD(1,GPT,c01afbc7-33e8-4352-a61e
-
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
je vois que tu as choisis de faire la mise à jour pendant l'installation
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
162.836875916 = 174.844764160 boot/grub/grub.cfg 1
2.280269623 = 2.448420864 boot/vmlinuz-4.4.0-109-generic 1
2.409934998 = 2.587648000 boot/vmlinuz-4.4.0-109-generic.efi.signed 1
1.597381592 = 1.715175424 boot/vmlinuz-4.4.0-31-generic 1
1.597381592 = 1.715175424 vmlinuz 1
2.946910858 = 3.164221440 boot/initrd.img-4.4.0-109-generic 4
2.699634552 = 2.898710528 boot/initrd.img-4.4.0-31-generic 1
2.699634552 = 2.898710528 initrd.img 1
2.699634552 = 2.898710528 initrd.img.old 1
=============================== StdErr Messages: ===============================
Tu penseras à régler le swap paragraphe 3.9 uniquement https://doc.ubuntu-fr.org/swap#regler_l … nt_du_swap
Dernière modification par ?? (Le 10/01/2018, à 17:34)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#68 Le 10/01/2018, à 17:23
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Mince je peux pas suivre le tuto de Gesbuklu !
J'ai défini les mots de passe supervisor et hdd mais je n'ai pas de menu "select an uefi as trusted for executing" qui apparaît !
Lui parle de InsydeH20 Setup Utility mais c'est le truc que j'ai lancé sur Windows ça, et je n'ai plus de Windows actuellement..
(et pour la mise à jour, et bien c'est bizarre car j'ai décoché le truc pendant l'install ubuntu..)
Dernière modification par quentind (Le 10/01/2018, à 17:23)
Hors ligne
#69 Le 10/01/2018, à 17:24
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
J'attends de savoir pour la suite de cela
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
car je ne le sens pas bien.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#70 Le 10/01/2018, à 17:29
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Et faut que je fasse quelquechose ?
Peut-être aurais-je dû lancer Windows à côté, ça aurait été plus simple ?
Dernière modification par quentind (Le 10/01/2018, à 17:30)
Hors ligne
#71 Le 10/01/2018, à 17:31
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Mince je peux pas suivre le tuto de Gesbuklu !
J'ai défini les mots de passe supervisor et hdd mais je n'ai pas de menu "select an uefi as trusted for executing" qui apparaît !
Lui parle de InsydeH20 Setup Utility mais c'est le truc que j'ai lancé sur Windows ça, et je n'ai plus de Windows actuellement..)
C'est le bios, Il est le même que tu utilises windows ou ubuntu
Voici un exemple de grille
http://www.zupimages.net/viewer.php?id=18/02/4zty.jpg
Si tu ne trouves pas, cela sera la séance photo à poster
Il faut probablement que tu valides le secure mode pour que cela apparaisse.
Je serais quand même surpris que cette procédure soit seulement accessible que par windows et pas directement par le bios.
Il est vrai que ce bios n'a pas su se mettre à jour de lui-même
Dernière modification par ?? (Le 10/01/2018, à 17:41)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#72 Le 10/01/2018, à 17:40
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Ouah j'ai exactement la même chose, sauf que je n'ai pas la ligne Select an uefi as trusted for executing..
J'ai activé le secure mode et redemarré, et pas de changement.
J'ai les 3 premiers mots de passe activés.
(pas d'appareil photo/smartphone à portée là pour les photos.. mais j'ai la même chose)
(Juste pour rappel, je n'ai pas essayé de boot-repair)
Dernière modification par quentind (Le 10/01/2018, à 17:52)
Hors ligne
#73 Le 10/01/2018, à 18:02
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Je suis en train de chercher un petit peu sur internet...... car pas d'idée...
C'est dommages que windows ne soit plus la car on aurait pu voir s'il pouvait le lancer.......
http://global-download.packardbell.com/ … 1515600696
Dernière modification par ?? (Le 10/01/2018, à 18:14)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#74 Le 10/01/2018, à 18:34
- ??
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
Il n'y a vraiment rien dans internet
Peux-tu refaire un boot-info
Cela pour bien vérifier que le mode secure est mis.
Boot-repair ne peut rien dans ce contexte
Pour un peu, je te referais bien faire la manip de dire que c'est windows. Au moins, il ne devrait plus figer l'ordinateur
Boot0000* Linux HD(1,MBR,0x4294967283,0x800,0x775000)/File(\EFI\Boot\grubx64.efi)RC
Boot0001* Windows Boot Manager HD(2,GPT,416e6f1c-2f4e-4886-9fa0-d951df848036,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........
C'est a faire avec la clé d'installation
Je peux faire quelques erreurs de frappes
setxkbmap fr
sudo mount /dev/sdb1 /mnt
sudo mkdir /mnt/EFI/Microsoft
sudo mkdir /mnt/EFI/Microsoft/Boot
cd /mnt/EFI/ubuntu/
sudo cp -R * /mnt/EFI/Microsoft/Boot/
sudo cp /mnt/EFI/Microsoft/Boot/grubx64.efi /mnt/EFI/Microsoft/Boot/Bootmgfw.efi
sudo ls /mnt/EFI/Microsoft/Boot
On va fabriquer l'entrée oubliée.
sudo efibootmgr -c -d /dev/sdb -p 1 -L "Windows Boot Manager" -l "\EFI\Microsoft\Boot\Bootmgfw.efi"
sudo efibootmgr -v
et tu rebootes en mode non sécurisé afin de ne pas trop dialoguer avec ce bios
Dernière modification par ?? (Le 10/01/2018, à 18:48)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#75 Le 10/01/2018, à 18:59
- quentind
Re : [Résolu] Bloqué à paquet grub2 - Packard Bell Easynote ENTE69AP-P4HR
S'il le faut, je pourrais toujours recommencer en réinstallant Windows..
ok voici le boot-info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 20151222............................................@.....2....0............A20 gate n
Boot sector info: Syslinux looks at sector 3034316 of /dev/sda1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 7,821,311 7,819,264 c W95 FAT32 (LBA)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sdb2 1,050,624 1,945,495,551 1,944,444,928 Data partition (Linux)
/dev/sdb3 1,945,495,552 1,953,523,711 8,028,160 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9AC7-318F vfat
/dev/sdb1 0FA3-429A vfat
/dev/sdb2 4d5f68d2-8f0e-4344-895b-f6238f4951f1 ext4
/dev/sdb3 fd12e80c-58ec-469c-9732-cf7cf0febd80 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 10 16:55 ata-Slimtype_DVD_A_DA8AESH_0080F0116471816FF101 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 17:00 ata-TOSHIBA_MQ01ABD100_76GJP3W0T-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jan 10 17:00 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 17:00 usb-SanDisk_Cruzer_200535508113FF822B3B-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 10 17:00 wwn-0x5000039722a86368 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 10 17:00 wwn-0x5000039722a86368-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sda1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? libcom32.c32 1
?? = ?? libutil.c32 1
?? = ?? menu.c32 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
libcom32.c32 : not a COM32/COM32R module
libutil.c32 : not a COM32/COM32R module
menu.c32 : not a COM32/COM32R module
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 4d5f68d2-8f0e-4344-895b-f6238f4951f1 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-109-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
menuentry 'Ubuntu, avec Linux 4.4.0-109-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-109-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-109-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-109-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-109-generic…'
linux /boot/vmlinuz-4.4.0-109-generic.efi.signed root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-109-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-4d5f68d2-8f0e-4344-895b-f6238f4951f1' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 4d5f68d2-8f0e-4344-895b-f6238f4951f1
else
search --no-floppy --fs-uuid --set=root 4d5f68d2-8f0e-4344-895b-f6238f4951f1
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=4d5f68d2-8f0e-4344-895b-f6238f4951f1 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=0FA3-429A /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdb3 during installation
UUID=fd12e80c-58ec-469c-9732-cf7cf0febd80 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
162.836875916 = 174.844764160 boot/grub/grub.cfg 1
2.280269623 = 2.448420864 boot/vmlinuz-4.4.0-109-generic 1
2.409934998 = 2.587648000 boot/vmlinuz-4.4.0-109-generic.efi.signed 1
1.597381592 = 1.715175424 boot/vmlinuz-4.4.0-31-generic 1
1.597381592 = 1.715175424 vmlinuz 1
2.946910858 = 3.164221440 boot/initrd.img-4.4.0-109-generic 4
2.699634552 = 2.898710528 boot/initrd.img-4.4.0-31-generic 1
2.699634552 = 2.898710528 initrd.img 1
2.699634552 = 2.898710528 initrd.img.old 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/6342/mounts) leaked on lvs invocation. Parent PID 13994: bash
File descriptor 63 (pipe:[52897]) leaked on lvs invocation. Parent PID 13994: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20180110_1700 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash acpi=off nomodeset ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sdb2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="9AC7-318F" TYPE="vfat" PARTUUID="0005f9f3-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="0FA3-429A" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="80eaea41-25c2-45d4-8d12-c3a8f2313a11"
/dev/sdb2: UUID="4d5f68d2-8f0e-4344-895b-f6238f4951f1" TYPE="ext4" PARTUUID="a7659263-32f4-4350-bb3c-aa9c5667404b"
/dev/sdb3: UUID="fd12e80c-58ec-469c-9732-cf7cf0febd80" TYPE="swap" PARTUUID="429ca37f-1653-4cf8-9279-68aa7d1ad308"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sdb2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jan 10 14:33 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Dec 12 22:48 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sdb2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb2: UUID=0FA3-429A (sdb1)
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,2001,2002,2003
Boot0000* Linux HD(1,MBR,0x4294967283,0x800,0x775000)/File(EFIBootgrubx64.efi)RC
Boot0001* Unknown Device: HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu HD(1,GPT,80eaea41-25c2-45d4-8d12-c3a8f2313a11,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0003* Unknown Device: HD(1,GPT,c01afbc7-33e8-4352-a61e-a45d9660e8eb,0x800,0x100000)/File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:4005MB:scsi:512:512:msdos:SanDisk Cruzer:;
1:1049kB:4005MB:4003MB:fat32::boot, lba;
BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:4110MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 3.7G
sda1 part vfat 3.7G
sdb disk 931.5G
sdb1 part vfat 512M
sdb2 part ext4 927.2G
sdb3 part swap 3.8G
sr0 rom 1024M
loop0 loop squashfs 1.4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 1 running
sda1 1 0 1 /cdrom
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 [SWAP]
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1918964k,nr_inodes=479741,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386720k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=386720k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fb0 fd full fuse hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 9a 42 a3 0f 4e 4f 20 4e 41 4d 45 20 20 |..).B..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 378M 6.0M 372M 2% /run
/dev/sda1 vfat 3.8G 1.5G 2.3G 39% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 1.9G 86M 1.8G 5% /
tmpfs tmpfs 1.9G 240K 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 132K 1.9G 1% /tmp
tmpfs tmpfs 378M 104K 378M 1% /run/user/999
/dev/sdb1 vfat 511M 3.4M 508M 1% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 913G 4.3G 862G 1% /mnt/boot-sav/sdb2
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 3.7 GiB, 4004511744 bytes, 7821312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0005f9f3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 7821311 7819264 3.7G c W95 FAT32 (LBA)
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: FEF83830-080F-497C-84BB-1D2A25600BD6
Device Start End Sectors Size Type
/dev/sdb1 2048 1050623 1048576 512M EFI System
/dev/sdb2 1050624 1945495551 1944444928 927.2G Linux filesystem
/dev/sdb3 1945495552 1953523711 8028160 3.8G Linux swap
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options: sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdb1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par quentind (Le 10/01/2018, à 19:03)
Hors ligne