#1 Le 17/09/2017, à 12:07
- constant1462
[RESOLUT]plus rien après l’installation de ubuntu
bonjour
Essayant de vouloir passer de la version 16.04 a la 17.04 sur mon portable rien et aller comme je voulais.
Du coup maintenant j'en suis arrivé a cela,plus de windows sur mon PC (et c'est pas se que je voulais au début) et en plus ,plus de Ubuntu non plus ,car a la fin de l'instillation ,quand il dois redémarrer pour finir l'installation ,j'arrive sur un écran violet et plus rien ne se passe !!
J'ai ressayer de remettre la version 16 ,même résultat .
Le problème peut venir que cela effacer mon disque dur ?
enfin bref,deux jours dessus et pas un résultat ,alors d'ou viens mon problème
PS: je précise quand même que ,depuis la clé usb il fonctionne.
Merci de votre aide!
Dernière modification par constant1462 (Le 22/09/2017, à 17:15)
Hors ligne
#2 Le 17/09/2017, à 12:14
- michel_04
Re : [RESOLUT]plus rien après l’installation de ubuntu
Bonjour,
Essayant de vouloir passer de la version 16.04 a la 17.04 sur mon portable rien et aller comme je voulais.
On ne saute pas de version. 16.04 ---> 16.10 ---> 17.04.
Pourquoi vouloir passer d'une 16.04 LTS, maintenue jusqu'en avril 2021, à une 17.04 obsolète dans 3 mois ?
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#3 Le 17/09/2017, à 12:18
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
Ben j'en sais rien ?? je voulais essayer pour voir......
mais au final même la 16.04 ne fonctionne plus
Hors ligne
#4 Le 17/09/2017, à 12:48
- lucmars
Re : [RESOLUT]plus rien après l’installation de ubuntu
Avec ta clef/dvd 1604 en mode essayer fais un rapport boot-info (voir boot-info dans la doc).
Gaulois Matter !
Hors ligne
#5 Le 17/09/2017, à 12:54
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
Ok je ferai ça, mais la je suis en déplacement,donc pas essaie possible jusqu' à demain soir ......:-(
@+
Dernière modification par constant1462 (Le 17/09/2017, à 12:55)
Hors ligne
#6 Le 19/09/2017, à 15:13
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
bon j arrive rien
buntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair
Cannot add PPA: 'ppa:~yannubuntu/ubuntu/boot-repair'.
ERROR: '~yannubuntu' user or team does not exist.
ou alors cela
ubuntu@ubuntu:~$ boot-info
boot-info: command not found
ubuntu@ubuntu:~$ setxkb,q r
setxkb,q: command not found
ubuntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubunt/boot-repair
Cannot add PPA: 'ppa:~yannubunt/ubuntu/boot-repair'.
ERROR: '~yannubunt' user or team does not exist.
ubuntu@ubuntu:~$ sudo update
sudo: update: command not found
ubuntu@ubuntu:~$ sudo apt install boot-info
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package boot-info
Dernière modification par constant1462 (Le 19/09/2017, à 15:19)
Hors ligne
#7 Le 19/09/2017, à 15:42
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
la j'essaye de remettre la 16.04.3 et j'arrive pas ,alors que au début elle tournait normalement
Hors ligne
#8 Le 19/09/2017, à 17:51
- moko138
Re : [RESOLUT]plus rien après l’installation de ubuntu
buntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair Cannot add PPA: 'ppa:~yannubuntu/ubuntu/boot-repair'. ERROR: '~yannubuntu' user or team does not exist.
Pourtant les dépôts existent toujours :
ht tp://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu/dists/
Mais on voit des fautes de frappe, comme
ubuntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubunt/boot-repair
Cannot add PPA: 'ppa:~yannubunt/ubuntu/boot-repair'.
ERROR: '~yannubunt' user or team does not exist.
yannubunt au lieu de
yannubuntu
Il ne faut pas retaper les commandes ni leur retour ! Utilise
- un triple clic gauche sur une ligne pour la sélectionner tout entière et la copier,
- un clic milieu pour la coller.
/!\ boot-info nécessite le paquet python-gi. à partir de 16.04, vérifier s'il est installé ou s'il faut l'installer.
Donne le lien vers un rapport boot-info, sans faire de "réparation recommandée".
/!\ Donc ne lance pas boot-repair, mais boot-info. Comme décrit dans ce dernier lien, à partir de :
Une seule commande à passer dans un terminal pour installer et lancer Boot-Info :
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 19/09/2017, à 20:03
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
alors moi j ai sa après les commande
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
ubuntu@ubuntu:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair
gpg: keyring `/tmp/tmpw73oafti/secring.gpg' created
gpg: keyring `/tmp/tmpw73oafti/pubring.gpg' created
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: /tmp/tmpw73oafti/trustdb.gpg: trustdb created
gpg: key 60D8DA0B: public key "Launchpad PPA for YannUbuntu" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
OK
ubuntu@ubuntu:~$ sudo apt update
Ign:1 cdrom://Ubuntu 16.04.3 LTS _Xenial Xerus_ - Release amd64 (20170801) xenial InRelease
Ign:2 cdrom://Ubuntu 16.04.3 LTS _Xenial Xerus_ - Release amd64 (20170801) zesty InRelease
Hit:3 cdrom://Ubuntu 16.04.3 LTS _Xenial Xerus_ - Release amd64 (20170801) xenial Release
Hit:4 cdrom://Ubuntu 16.04.3 LTS _Xenial Xerus_ - Release amd64 (20170801) zesty Release
Get:6 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Get:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17.5 kB]
Hit:8 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:10 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
Get:11 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1,868 B]
Get:12 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [354 kB]
Get:13 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2,092 B]
Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [630 kB]
Get:15 http://security.ubuntu.com/ubuntu xenial-security/main Translation-en [157 kB]
Get:16 http://security.ubuntu.com/ubuntu xenial-security/main amd64 DEP-11 Metadata [59.9 kB]
Get:17 http://security.ubuntu.com/ubuntu xenial-security/main DEP-11 64x64 Icons [57.1 kB]
Get:18 http://security.ubuntu.com/ubuntu xenial-security/restricted amd64 Packages [7,352 B]
Get:19 http://archive.ubuntu.com/ubuntu xenial-updates/main Translation-en [265 kB]
Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 DEP-11 Metadata [305 kB]
Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/main DEP-11 64x64 Icons [216 kB]
Get:22 http://archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 Packages [7,972 B]
Get:23 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Translation-en [2,692 B]
Fetched 2,288 kB in 1s (1,781 kB/s)
** (appstreamcli:3509): CRITICAL **: Error while moving old database out of the way.
AppStream cache update failed.
Reading package lists... Done
Building dependency tree
Reading state information... Done
162 packages can be upgraded. Run 'apt list --upgradable' to see them.
ubuntu@ubuntu:~$ sudo apt install boot-info
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit python-gi
Suggested packages:
mbr mdadm boot-repair os-uninstaller gawk-doc python-gi-cairo
Recommended packages:
gksu
The following NEW packages will be installed:
boot-info boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
python-gi
0 upgraded, 8 newly installed, 0 to remove and 162 not upgraded.
Need to get 1,221 kB of archives.
After this operation, 5,120 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14.1 kB]
Get:2 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.3~ppa1 [36.8 kB]
Get:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Get:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa42 [416 kB]
Get:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-gi amd64 3.20.0-0ubuntu1 [194 kB]
Get:6 http://archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14.6 kB]
Get:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-info all 4ppa42 [5,978 B]
Get:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa42 [142 kB]
Fetched 1,221 kB in 1s (623 kB/s)
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 194399 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-4_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.10-4) ...
Setting up libsigsegv2:amd64 (2.10-4) ...
Processing triggers for libc-bin (2.23-0ubuntu9) ...
Selecting previously unselected package gawk.
(Reading database ... 194407 files and directories currently installed.)
Preparing to unpack .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Unpacking gawk (1:4.1.3+dfsg-0.1) ...
Selecting previously unselected package python-gi.
Preparing to unpack .../python-gi_3.20.0-0ubuntu1_amd64.deb ...
Unpacking python-gi (3.20.0-0ubuntu1) ...
Selecting previously unselected package glade2script.
Preparing to unpack .../glade2script_3.2.3~ppa1_all.deb ...
Unpacking glade2script (3.2.3~ppa1) ...
Selecting previously unselected package boot-sav.
Preparing to unpack .../boot-sav_4ppa42_all.deb ...
Unpacking boot-sav (4ppa42) ...
Selecting previously unselected package boot-info.
Preparing to unpack .../boot-info_4ppa42_all.deb ...
Unpacking boot-info (4ppa42) ...
Selecting previously unselected package boot-sav-extra.
Preparing to unpack .../boot-sav-extra_4ppa42_all.deb ...
Unpacking boot-sav-extra (4ppa42) ...
Selecting previously unselected package pastebinit.
Preparing to unpack .../pastebinit_1.5-1_all.deb ...
Unpacking pastebinit (1.5-1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for gnome-menus (3.13.3-6ubuntu3.1) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5.1) ...
Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20160824-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Processing triggers for mime-support (3.59ubuntu1) ...
Setting up gawk (1:4.1.3+dfsg-0.1) ...
Setting up python-gi (3.20.0-0ubuntu1) ...
Setting up glade2script (3.2.3~ppa1) ...
Setting up boot-sav (4ppa42) ...
Setting up boot-info (4ppa42) ...
Setting up boot-sav-extra (4ppa42) ...
Setting up pastebinit (1.5-1) ...
je sais pas si c est se que tous voulait
Hors ligne
#10 Le 19/09/2017, à 20:06
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
une question , ou c est qu il y a un lexus des commandes pour que je puisse essayer de comprendre ,j ai bien dis essayer....
Hors ligne
#11 Le 20/09/2017, à 09:33
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
Par contre vu que je suis sur ubuntu par ma clef usb ,comment je peux savoir que sa lit ou installe bien sur mon DSS de mon portable
Hors ligne
#12 Le 20/09/2017, à 09:45
- moko138
Re : [RESOLUT]plus rien après l’installation de ubuntu
Tu as installé boot-repair et boot-info sur ta clef live.
Maintenant, suis le lien en #8 et donne-nous le lien vers le résultat.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 20/09/2017, à 12:49
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
http://paste.ubuntu.com/25578842/
voila et merci de votre aide
Dernière modification par constant1462 (Le 20/09/2017, à 12:50)
Hors ligne
#14 Le 20/09/2017, à 13:55
- moko138
Re : [RESOLUT]plus rien après l’installation de ubuntu
C'est du LVM2, donc en-dehors de mes compétences.
/dev/mapper/ubuntu--vg-root ext4 113G 4.3G 103G 4% /mnt/boot-sav/mapper/ubuntu--vg-root
/dev/sda2 1001470 250068991 249067522 118.8G 5 Extended
/dev/sda5 1001472 250068991 249067520 118.8G 8e Linux LVM
/dev/sda5 TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58 LVM2_member
Ce n'est pas 17.04 :
Operating System: Ubuntu 16.04.3 LTS
- -
Et voici le boot-info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 17Sep2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: LVM2_member
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......#..:...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 271120 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys /KERNEL.SYS
/COMMAND.COM
ubuntu-vg-root: ________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.3 LTS
Boot files: /etc/fstab
ubuntu-vg-swap_1: ______________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 999,423 997,376 83 Linux
/dev/sda2 1,001,470 250,068,991 249,067,522 5 Extended
/dev/sda5 1,001,472 250,068,991 249,067,520 8e Linux LVM
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.7 GiB, 15795748864 bytes, 30851072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 30,851,071 30,849,024 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/mapper/ubuntu--vg-root 06ed16cc-9a01-4019-ba1f-48f53f203722 ext4
/dev/mapper/ubuntu--vg-swap_1 355280eb-70a9-4503-ac96-733cba251e90 swap
/dev/sda1 18c16686-f8be-4739-b492-fc5e3e43781c ext2
/dev/sda5 TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58 LVM2_member
/dev/sdb1 289B-95BF vfat TRANSCEND
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 20 10:45 ata-SanDisk_SSD_U100_128GB_114754300774 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 20 10:45 ata-SanDisk_SSD_U100_128GB_114754300774-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 20 10:45 ata-SanDisk_SSD_U100_128GB_114754300774-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 20 10:45 ata-SanDisk_SSD_U100_128GB_114754300774-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Sep 20 10:45 dm-name-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 Sep 20 10:45 dm-name-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Sep 20 10:45 dm-uuid-LVM-xPvvJfpVPI7GO9r8cX3xs6bnVdtSezb02Smj2Wq2vp1KZNyHQJLok6tPGeV3BGjD -> ../../dm-0
lrwxrwxrwx 1 root root 10 Sep 20 10:45 dm-uuid-LVM-xPvvJfpVPI7GO9r8cX3xs6bnVdtSezb0YGLa2376blqjeDOAJSfDUU2ZvnuCNESt -> ../../dm-1
lrwxrwxrwx 1 root root 10 Sep 20 10:45 lvm-pv-uuid-TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58 -> ../../sda5
lrwxrwxrwx 1 root root 9 Sep 20 10:45 usb-JetFlash_Transcend_16GB_21WKYV9AGMA55QZF-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Sep 20 10:45 usb-JetFlash_Transcend_16GB_21WKYV9AGMA55QZF-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Sep 20 10:45 wwn-0x5001b445c378a766 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 20 10:45 wwn-0x5001b445c378a766-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 20 10:45 wwn-0x5001b445c378a766-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 20 10:45 wwn-0x5001b445c378a766-part5 -> ../../sda5
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
============================= sda1/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/xPvvJf-pVPI-7GO9-r8cX-3xs6-bnVd-tSezb0/2Smj2W-q2vp-1KZN-yHQJ-Lok6-tPGe-V3BGjD'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/xPvvJf-pVPI-7GO9-r8cX-3xs6-bnVd-tSezb0/2Smj2W-q2vp-1KZN-yHQJ-Lok6-tPGe-V3BGjD' 06ed16cc-9a01-4019-ba1f-48f53f203722
else
search --no-floppy --fs-uuid --set=root 06ed16cc-9a01-4019-ba1f-48f53f203722
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_CH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-06ed16cc-9a01-4019-ba1f-48f53f203722' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
linux /vmlinuz-4.10.0-28-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.10.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-06ed16cc-9a01-4019-ba1f-48f53f203722' {
menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-06ed16cc-9a01-4019-ba1f-48f53f203722' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /vmlinuz-4.10.0-28-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-06ed16cc-9a01-4019-ba1f-48f53f203722' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /vmlinuz-4.10.0-28-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-06ed16cc-9a01-4019-ba1f-48f53f203722' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /vmlinuz-4.10.0-28-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-28-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
knetbsd /memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 18c16686-f8be-4739-b492-fc5e3e43781c
else
search --no-floppy --fs-uuid --set=root 18c16686-f8be-4739-b492-fc5e3e43781c
fi
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'FreeDOS (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-289B-95BF' {
insmod part_msdos
insmod fat
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 289B-95BF
else
search --no-floppy --fs-uuid --set=root 289B-95BF
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
0.330646515 = 0.355028992 grub/grub.cfg 8
0.330641747 = 0.355023872 grub/i386-pc/core.img 2
0.038779259 = 0.041638912 vmlinuz-4.10.0-28-generic 8
0.330651283 = 0.355034112 initrd.img-4.10.0-28-generic 16
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? menu.c32 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/ldlinux.c32 1
?? = ?? syslinux/libcom32.c32 1
?? = ?? syslinux/libutil.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
menu.c32 : COM32R module (v4.xx)
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
========================== ubuntu-vg-root/etc/fstab: ===========================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=18c16686-f8be-4739-b492-fc5e3e43781c /boot ext2 defaults 0 2
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 98 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000010 16 60 b8 01 00 00 00 00 a0 b9 96 04 00 00 00 00 |.`..............|
00000020 08 00 00 00 00 00 00 00 58 43 b8 01 00 00 00 00 |........XC......|
00000030 a8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000040 c8 3e b8 01 00 00 00 00 b0 b9 96 04 00 00 00 00 |.>..............|
00000050 08 00 00 00 00 00 00 00 1b 5d b8 01 00 00 00 00 |.........]......|
00000060 b8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000070 0f 5d b8 01 00 00 00 00 c0 b9 96 04 00 00 00 00 |.]..............|
00000080 08 00 00 00 00 00 00 00 57 bf b8 01 00 00 00 00 |........W.......|
00000090 c8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
000000a0 ef be b8 01 00 00 00 00 d0 b9 96 04 00 00 00 00 |................|
000000b0 08 00 00 00 00 00 00 00 04 5d b8 01 00 00 00 00 |.........]......|
000000c0 d8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
000000d0 7d 70 b8 01 00 00 00 00 e0 b9 96 04 00 00 00 00 |}p..............|
000000e0 08 00 00 00 00 00 00 00 f4 5c b8 01 00 00 00 00 |.........\......|
000000f0 e8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000100 e3 5c b8 01 00 00 00 00 f0 b9 96 04 00 00 00 00 |.\..............|
00000110 08 00 00 00 00 00 00 00 d7 5c b8 01 00 00 00 00 |.........\......|
00000120 f8 b9 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000130 02 60 b8 01 00 00 00 00 00 ba 96 04 00 00 00 00 |.`..............|
00000140 08 00 00 00 00 00 00 00 cb 5c b8 01 00 00 00 00 |.........\......|
00000150 08 ba 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000160 3a 43 b8 01 00 00 00 00 10 ba 96 04 00 00 00 00 |:C..............|
00000170 08 00 00 00 00 00 00 00 a0 49 b8 01 00 00 00 00 |.........I......|
00000180 18 ba 96 04 00 00 00 00 08 00 00 00 00 00 00 00 |................|
00000190 60 79 b8 01 00 00 00 00 20 ba 96 04 00 00 00 00 |`y...... .......|
000001a0 08 00 00 00 00 00 00 00 bc 49 b8 01 00 00 00 00 |.........I......|
000001b0 28 ba 96 04 00 00 00 00 08 00 00 00 00 00 00 56 |(..............V|
000001c0 19 3e 8e fe ff ff 02 00 00 00 00 78 d8 0e 00 00 |.>.........x....|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/6071/mounts) leaked on lvs invocation. Parent PID 12978: bash
File descriptor 63 (pipe:[50775]) leaked on lvs invocation. Parent PID 12978: bash
File descriptor 9 (/proc/6071/mounts) leaked on lvchange invocation. Parent PID 13966: bash
File descriptor 63 (pipe:[50775]) leaked on lvchange invocation. Parent PID 13966: bash
File descriptor 9 (/proc/6071/mounts) leaked on lvchange invocation. Parent PID 13966: bash
File descriptor 63 (pipe:[50775]) leaked on lvchange invocation. Parent PID 13966: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-09-20__10h45 ===================
boot-info version : 4ppa42
boot-sav version : 4ppa42
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa42
BLKID BEFORE LVM ACTIVATION:
/dev/sda1: UUID="18c16686-f8be-4739-b492-fc5e3e43781c" TYPE="ext2" PARTUUID="1e1a22f5-01"
/dev/sdb1: LABEL="TRANSCEND" UUID="289B-95BF" TYPE="vfat" PARTUUID="0088ef8a-01"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58" TYPE="LVM2_member" PARTUUID="1e1a22f5-05"
/dev/mapper/ubuntu--vg-root: UUID="06ed16cc-9a01-4019-ba1f-48f53f203722" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="355280eb-70a9-4503-ac96-733cba251e90" TYPE="swap"
MODPROBE
VGSCAN
File descriptor 9 (/proc/6071/mounts) leaked on vgscan invocation. Parent PID 6082: /bin/bash
Reading all physical volumes. This may take a while...
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 9 (/proc/6071/mounts) leaked on vgchange invocation. Parent PID 6082: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 9 (/proc/6071/mounts) leaked on lvscan invocation. Parent PID 6082: /bin/bash
LVSCAN:
ACTIVE '/dev/ubuntu-vg/root' [114.84 GiB] inherit
ACTIVE '/dev/ubuntu-vg/swap_1' [3.90 GiB] inherit
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
Is there RAID on this computer? yes
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
BLKID BEFORE RAID ACTIVATION:
/dev/sda1: UUID="18c16686-f8be-4739-b492-fc5e3e43781c" TYPE="ext2" PARTUUID="1e1a22f5-01"
/dev/sdb1: LABEL="TRANSCEND" UUID="289B-95BF" TYPE="vfat" PARTUUID="0088ef8a-01"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58" TYPE="LVM2_member" PARTUUID="1e1a22f5-05"
/dev/mapper/ubuntu--vg-root: UUID="06ed16cc-9a01-4019-ba1f-48f53f203722" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="355280eb-70a9-4503-ac96-733cba251e90" TYPE="swap"
dmraid -si -c: no raid disks
No DMRAID disk.
RAID detected. You may want to retry after installing the [mdadm] packages. (sudo apt-get install -y --force-yes mdadm --no-install-recommends)
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
Warning: no DMRAID nor MD_ARRAY.
File descriptor 9 (/proc/6071/mounts) leaked on vgs invocation. Parent PID 8144: grub-probe
File descriptor 9 (/proc/6071/mounts) leaked on vgs invocation. Parent PID 8144: grub-probe
boot-info is executed in live-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- BOOT_IMAGE=/casper/vmlinuz.efi
ls: cannot access '/home/usr/.config': No such file or directory
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root
=================== os-prober:
/dev/sdb1:FreeDOS:FreeDOS:chain
/dev/mapper/ubuntu--vg-root:Ubuntu 16.04.3 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="18c16686-f8be-4739-b492-fc5e3e43781c" TYPE="ext2" PARTUUID="1e1a22f5-01"
/dev/sdb1: LABEL="TRANSCEND" UUID="289B-95BF" TYPE="vfat" PARTUUID="0088ef8a-01"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="TpjNkU-lkeK-48eN-qlZQ-AkAj-NRM3-p1TT58" TYPE="LVM2_member" PARTUUID="1e1a22f5-05"
/dev/mapper/ubuntu--vg-root: UUID="06ed16cc-9a01-4019-ba1f-48f53f203722" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="355280eb-70a9-4503-ac96-733cba251e90" TYPE="swap"
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 0 Windows, 1 unknown type OS.
dir: cannot access '/var/log/boot-sav/log/2017-09-20__10h45boot-info14/sdb': No such file or directory
dir: cannot access '/var/log/boot-sav/log/2017-09-20__10h45boot-info14/sdb': No such file or directory
dir: cannot access '/var/log/boot-sav/log/2017-09-20__10h45boot-info14/sdb': No such file or directory
=================== sda1recordfail=1/grub/grubenv :
recordfail=1
=================== mapper/ubuntu--vg-root/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 1 11:28 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 21 04:11 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Jun 21 04:11 10_linux
-rwxr-xr-x 1 root root 11082 Jun 21 04:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 21 04:11 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 21 04:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 21 04:11 40_custom
-rwxr-xr-x 1 root root 216 Jun 21 04:11 41_custom
-rw-r--r-- 1 root root 483 Jun 21 04:11 README
=================== mapper/ubuntu--vg-root/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot detected in the fstab of mapper/ubuntu--vg-root: UUID=18c16686-f8be-4739-b492-fc5e3e43781c (sda1)
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, is-sepboot, grubenv-ng nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
mapper/ubuntu--vg-root : sda, not-sepboot, no-grubenv grub2, signed grub-pc , update-grub, 64, no-boot, is-os, not--efi--part, fstab-has-goodBOOT, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/mapper/ubuntu--vg-root.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA SanDisk SSD U100 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 512MB 511MB primary ext2 boot
2 513MB 128GB 128GB extended
5 513MB 128GB 128GB logical lvm
Model: JetFlash Transcend 16GB (scsi)
Disk /dev/sdb: 15.8GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 15.8GB 15.8GB primary fat32 boot, lba
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-swap_1: 4190MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 4190MB 4190MB linux-swap(v1)
Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-root: 123GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 123GB 123GB ext4
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:msdos:ATA SanDisk SSD U100:;
1:1049kB:512MB:511MB:ext2::boot;
2:513MB:128GB:128GB:::;
5:513MB:128GB:128GB:::lvm;
BYT;
/dev/sdb:15.8GB:scsi:512:512:msdos:JetFlash Transcend 16GB:;
1:1049kB:15.8GB:15.8GB:fat32::boot, lba;
BYT;
/dev/mapper/ubuntu--vg-swap_1:4190MB:dm:512:512:loop:Linux device-mapper (linear):;
1:0.00B:4190MB:4190MB:linux-swap(v1)::;
BYT;
/dev/mapper/ubuntu--vg-root:123GB:dm:512:512:loop:Linux device-mapper (linear):;
1:0.00B:123GB:123GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 14.7G
sdb1 part vfat 14.7G TRANSCEND
loop0 loop squashfs 1.4G
sda disk 119.2G
sda2 part 1K
sda5 part LVM2_member 118.8G
dm-1 lvm swap 3.9G
dm-0 lvm ext4 114.9G
sda1 part ext2 487M
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
loop0 1 1 0 /rofs
sda 0 0 0 running
sda2 0 0 0
sda5 0 0 0
dm-1 0 0 0 running
dm-0 0 0 0 running /mnt/boot-sav/mapper/ubuntu--vg-root
sda1 0 0 0 /mnt/boot-sav/sda1
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1955436k,nr_inodes=488859,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=394296k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
aufs on / type aufs (rw,noatime,si=93cfdad81b177991)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15664)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=394296k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type ext2 (rw,relatime,block_validity,barrier,user_xattr,acl)
/dev/mapper/ubuntu--vg-root on /mnt/boot-sav/mapper/ubuntu--vg-root type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/dm-0 (filtered): alignment_offset badblocks bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered): alignment_offset badblocks bdi capability dev discard_alignment dm ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dm-0 dm-1 dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout ubuntu-vg uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control ubuntu--vg-root ubuntu--vg-swap_1
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 386M 6.1M 380M 2% /run
/dev/sdb1 vfat 15G 4.0G 11G 27% /cdrom
/dev/loop0 squashfs 1.5G 1.5G 0 100% /rofs
aufs aufs 1.9G 69M 1.9G 4% /
tmpfs tmpfs 1.9G 192K 1.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 32K 1.9G 1% /tmp
tmpfs tmpfs 386M 88K 385M 1% /run/user/999
/dev/sda1 ext2 472M 63M 385M 15% /mnt/boot-sav/sda1
/dev/mapper/ubuntu--vg-root ext4 113G 4.3G 103G 4% /mnt/boot-sav/mapper/ubuntu--vg-root
=================== fdisk -l:
Disk /dev/loop0: 1.4 GiB, 1532116992 bytes, 2992416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1e1a22f5
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 999423 997376 487M 83 Linux
/dev/sda2 1001470 250068991 249067522 118.8G 5 Extended
/dev/sda5 1001472 250068991 249067520 118.8G 8e Linux LVM
Disk /dev/sdb: 14.7 GiB, 15795748864 bytes, 30851072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0088ef8a
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 30851071 30849024 14.7G c W95 FAT32 (LBA)
Disk /dev/mapper/ubuntu--vg-root: 114.9 GiB, 123304148992 bytes, 240828416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/ubuntu--vg-swap_1: 3.9 GiB, 4190109696 bytes, 8183808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to enable-raid enable-lvm) and reinstall the grub2 of mapper/ubuntu--vg-root into the MBR of sda, using the following options: sda1/boot,
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 20/09/2017, à 14:04
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
hello
non c'est pas la 17.04 car vu que je n'arrivais a rien ,j'ai essayé de remettre la 16, mais c'est le même résultat .
je me demande si c'est pas lié au faite que j'ai effacer windows 10 et que qqch a disparut dans le boot du SSD.
Hors ligne
#16 Le 20/09/2017, à 14:04
- ??
Re : [RESOLUT]plus rien après l’installation de ubuntu
Bonjour
Ton installation a viré windows. Si tu souhaites continuer à vouloir utiliser windows, tu devrais le réinstaller . en lui demandant de virer ubuntu car c'est plus simple
Je pense que par la suite tu pourras reéinstaller ubuntu en lui donnant des ordres pour qu'il conserve windows au lieu de le détruire
Si tu n'as pas besoin de windows, je pense que ton écran violet est du à la non utilisation d'une option de boot
Dans 80% des cas, l'option nomodeset est efficace voir paragraphe 6.2 de cette doc. https://doc.ubuntu-fr.org/kernel
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#17 Le 20/09/2017, à 14:09
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
Et,qu'est-ce du LMV2 ?
Hors ligne
#18 Le 20/09/2017, à 14:12
- ??
Re : [RESOLUT]plus rien après l’installation de ubuntu
https://doc.ubuntu-fr.org/lvm#introduction
En fait, un lvm est intéressant lorsqu'on a au moins deux disques, c'est une façon de ne les voir que comme un seul et de tout perdre lorsque l'un tombe en panne.
Dernière modification par ?? (Le 20/09/2017, à 14:15)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#19 Le 20/09/2017, à 14:17
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
si je lit la fin du boot-info c'est marqué cela
================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to enable-raid enable-lvm) and reinstall the grub2 of mapper/ubuntu--vg-root into the MBR of sda, using the following options: sda1/boot,
Additional repair would be performed: unhide-bootmenu-10s
je voudrais bien réinstaller windows ,mais comme mon portable je l'ai acheter avec win 8 ou 7 (je sais plus)et que ensuite je l'ai passer sous 10 ,ben je suis en peut dans la m.... maintenant.
Bon au pire c'est pas si grave ,mais il faut que celui-la tourne sur unbutu car c'est pour utiliser un programme pour l'astro que j'ai décidé de faire le pas en linux.
Hors ligne
#20 Le 20/09/2017, à 14:34
- ??
Re : [RESOLUT]plus rien après l’installation de ubuntu
Tu as dit que tu avais un écran violet et pas un message du bios disant qu'il ne trouvait pas de fichier de boot.
Pour info
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
Cela est déjà correct et le contenu de ta partition est bonne
sda1: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img
C'est, comme très souvent, un problème d'affichage sur l'écran.
PS, pour installer windows 10, il suffit de télecharger son ISO. microsoft a un site de téléchargement. https://www.microsoft.com/fr-fr/softwar … ndows10ISO
Dernière modification par ?? (Le 20/09/2017, à 14:36)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#21 Le 20/09/2017, à 15:07
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
hello
merci pour le lien
au sujet de l'écran violet ,il est seulement bloqué violet après qu'il me demande de rebooter pour finir l’installation, car maintenant si je le redémarre , il y a des ligne de code et plus rien,il me semble que cela parle d'un "kernel"
voila la dernière phrase,
[ 1.651172] ---[ end kernet panic - not syncing: No working init found. Try passing init= option to kernel. See linux Documentation/admin-guide/init.rst for guidance.
Dernière modification par constant1462 (Le 20/09/2017, à 15:23)
Hors ligne
#22 Le 20/09/2017, à 15:23
- ??
Re : [RESOLUT]plus rien après l’installation de ubuntu
Essaies de lire cela: https://forum.ubuntu-fr.org/viewtopic.php?id=1994634
Tu devrais trouver un cas proche du tien. Cela va te permettre d'être plus précis pour décrire ce qui se passe.
Tu devrais avoir le choix entre tenter de booter avec un ancien noyau en faisant apparaître le menu de choix en appuyant sur la touche Tab ou Ech au moment de la mise sous tension
Ou lancer boot-repair en lui demandant de réinstaller un grub 3eme grille du paragraphe 2.4 de ce document https://doc.ubuntu-fr.org/boot-repair en cochant l'option "purger grub avant de le réinstaller".
ainsi que "purger les kernels puis réinstaller le dernier."
Mais gros problème, cet outil a eu récemment une mise à jour ( le 17/09/2017) et je ne sais pas si la doc est à jour. Il est donc possible que cela ne fonctionne pas exactement comme indiqué.
Dernière modification par ?? (Le 20/09/2017, à 15:43)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#23 Le 20/09/2017, à 16:19
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
bon j ai essayer avec boot-repair comme dans 2.4
et voila le message que j ai quand je met appliquer
GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again.
Hors ligne
#24 Le 20/09/2017, à 17:07
- ??
Re : [RESOLUT]plus rien après l’installation de ubuntu
je viens de découvrir à l'instant ce bug dans une autre discussion.
Essaies de lire cela: https://forum.ubuntu-fr.org/viewtopic.php?id=1994634
Si tu ne trouves pas trop, attaques directement au cas E
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#25 Le 20/09/2017, à 17:26
- constant1462
Re : [RESOLUT]plus rien après l’installation de ubuntu
je viens d'essayer mais ......
ubuntu@ubuntu:~$ sudo cryptsetup luksOpen /dev/sda3 sda3_crypt
Device /dev/sda3 is not a valid LUKS device.
quand sa veut pas,......sa veut pas!
Hors ligne