#1 Le 18/08/2017, à 10:05
- QLSVB
[RESOLU] diagnostiquer si le système contient des bugs?
Bonjour,
Depuis un certains temps, mon ordinateur semble avoir de plus en plus de bugs et je me demandais s'il existe un moyen de les dignostiquer ou de détecter un ou des logiciels corrompu ou quoi que ce soit d'autres l'empêche de fonctionner correctement?
Les bugs courants sont:
Lorsque deux pages d'un même programme sont ouvertes, peut importe lequel, (exemple thunderbird, libreoffice writer, internet) lorsque je clique sur son icone dans la barre des menus pour passer à l'autre fenêtre, l'ordinateur bug. Il fait disparaître un instant toutes les fenêtres et m'affiche à nouveau l'ancienne. Suite à cela, pas tout le temps, il m'affiche le logo qui informe d'un bug et propose d'envoyer un rapport. Lorsque je souhaite le faire il ferme la fenêtre et le rapport n'est pas envoyé. Le seul moyen de passer de l'une à l'autre des fenêtres est d'utiliser "alt-tab" et là de cliquer sur le logo dudit programme.
Depuis peu, lorsque je laisse une page internet active pendant que je travail sur autre chose et que je la remet à nouveau en premier plan, l'intérieur du cadre est blanc. S'il y avait par exemple youtube qui tournait avec de la musique, les chansons continuent à défiler, mais je ne vois rien et ne peut rien commander. Le fait d'actualiser la page ne change rien, je dois la fermer et l'ouvrir à nouveau. Si cela m'arrive avec mozzila et qu'une fenêtre de tor était ouverte en même temps, cette dernière ne s'affiche plus et me dit que je dois la fermer avant de vouloir en ouvrir une autre.
Un autre est une difficulté de faire les mises à jour par le chemin du gestionnaire de mise à jour (qui d'ailleurs en se moment est apparut dans ma barre des tâches mais refuse d'apparaître lorsque je clique dessus et refuse de disparaître maintenant que j'ai fais les mises à jours par le terminal).
Dernière modification par QLSVB (Le 18/08/2017, à 16:26)
Hors ligne
#2 Le 18/08/2017, à 10:23
- nam1962
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Donne les retours complets de :
cat /etc/apt/sources.list
ls /etc/apt/sources.list.d -1
df -Th
df -i
[ Modéré ]
Hors ligne
#3 Le 18/08/2017, à 10:24
- pingouinux
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Bonjour,
Ton problème me fait penser à une saturation de la mémoire. As-tu essayé de rebooter ?
Hors ligne
#4 Le 18/08/2017, à 10:52
- QLSVB
Re : [RESOLU] diagnostiquer si le système contient des bugs?
@nam1962
sieber@sieber:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://ubuntu.ethz.ch/ubuntu/ xenial main restricted
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates main restricted
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://ubuntu.ethz.ch/ubuntu/ xenial universe
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial universe
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates universe
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://ubuntu.ethz.ch/ubuntu/ xenial multiverse
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates multiverse
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://ubuntu.ethz.ch/ubuntu/ xenial-backports main restricted universe multiverse
# deb-src http://ch.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security main restricted
# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security universe
# deb-src http://security.ubuntu.com/ubuntu xenial-security universe
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security multiverse
# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
sieber@sieber:~$
sieber@sieber:~$ ls /etc/apt/sources.list.d -1
appgrid-ubuntu-stable-xenial.list
appgrid-ubuntu-stable-xenial.list.save
gambas-team-ubuntu-gambas3-xenial.list
gambas-team-ubuntu-gambas3-xenial.list.save
libreoffice-ubuntu-libreoffice-5-2-xenial.list
libreoffice-ubuntu-libreoffice-5-2-xenial.list.save
libreoffice-ubuntu-libreoffice-5-3-xenial.list
libreoffice-ubuntu-libreoffice-5-3-xenial.list.save
libreoffice-ubuntu-ppa-xenial.list
libreoffice-ubuntu-ppa-xenial.list.save
nerdherd-ubuntu-cloud-xenial.list
nerdherd-ubuntu-cloud-xenial.list.save
ubuntu-wine-ubuntu-ppa-xenial.list
ubuntu-wine-ubuntu-ppa-xenial.list.save
sieber@sieber:~$
sieber@sieber:~$ df -Th
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 786M 9.4M 777M 2% /run
/dev/sda2 ext4 680G 330G 316G 52% /
tmpfs tmpfs 3.9G 39M 3.8G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/loop0 squashfs 81M 81M 0 100% /snap/core/2381
/dev/loop1 squashfs 81M 81M 0 100% /snap/core/2462
/dev/loop2 squashfs 80M 80M 0 100% /snap/core/2312
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
tmpfs tmpfs 786M 84K 786M 1% /run/user/1000
sieber@sieber:~$
sieber@sieber:~$ df -i
Sys. de fichiers Inœuds IUtil. ILibre IUti% Monté sur
udev 1000183 509 999674 1% /dev
tmpfs 1005747 740 1005007 1% /run
/dev/sda2 45244416 433084 44811332 1% /
tmpfs 1005747 62 1005685 1% /dev/shm
tmpfs 1005747 5 1005742 1% /run/lock
tmpfs 1005747 16 1005731 1% /sys/fs/cgroup
/dev/loop0 13689 13689 0 100% /snap/core/2381
/dev/loop1 13690 13690 0 100% /snap/core/2462
/dev/loop2 13692 13692 0 100% /snap/core/2312
/dev/sda1 0 0 0 - /boot/efi
tmpfs 1005747 37 1005710 1% /run/user/1000
sieber@sieber:~$
@pingouinux
Je ne suis pas sûr de comprendre ce que c'est que rebooter? S'il s'agit d'éteindre et de redémarrer, je le fais tous les jours.
Pour info, concernant la mémoire, j'avais des problèmes de lectures vidéos (saccade de l'image mais pas du son) à cause de cela j'avais installé zram et je n'avais plus de soucis.
Hors ligne
#5 Le 18/08/2017, à 12:01
- nam1962
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Côté dépôts, c'est presque propre, mais...
tu as 3 PPA pour LibreOffice, c'est deux de trop !
je te suggère de virer ceux qui forcent une version :
sudo rm /etc/apt/sources.list.d/libreoffice-ubuntu-libreoffice-5*
Puis un nettoyage :
sudo apt clean
sudo apt update
sudo apt full-upgrade
sudo apt autoremove --purge
(pense à passer l'autoremove une fois par trimestre.)
zram pourrait être la cause de tes soucis : il se comporte parfois comme il veut (je l'ai supprimé de mes tutos pour cela)
sudo service zram-config stop
sudo apt remove --purge zram-config
A la place, règle la swappiness pour minimiser la swap :
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-sysctl.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-sysctl.conf
sudo sysctl -p /etc/sysctl.d/99-sysctl.conf
Redémarre, puis dis nous quoi.
Pour compléter l'info sur l'intuition de pingouinux et également vérifier la piste de l'environnement qui aurait des états d'âmes, donne aussi
sudo dmidecode -t 16
sudo dmidecode -t 17
grep SwapTotal /proc/meminfo
echo $XDG_CURRENT_DESKTOP
ls -l /usr/share/xsessions
Dernière modification par nam1962 (Le 18/08/2017, à 12:06)
[ Modéré ]
Hors ligne
#6 Le 18/08/2017, à 15:19
- QLSVB
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Pour la première entrée il ne s'est rien passé, alors j'ai réessayé et ça à donné ça:
sieber@sieber:~$ sudo rm /etc/apt/sources.list.d/libreoffice-ubuntu-libreoffice-5*
rm: impossible de supprimer '/etc/apt/sources.list.d/libreoffice-ubuntu-libreoffice-5*': Aucun fichier ou dossier de ce type
sieber@sieber:~$
Ensuite rien de nouveau:
sieber@sieber:~$ sudo apt clean
sieber@sieber:~$
Pour celui-ci il y avait apparemment du boulot...:
sieber@sieber:~$ sudo apt autoremove --purge
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
hyphen-en-gb* libapache-pom-java* libbsh-java* libcommons-logging-java*
libcommons-parent-java* libhsqldb1.8.0-java* libllvm3.8:i386*
libreoffice-help-en-gb* libreoffice-help-en-us* libreoffice-help-fr*
libreoffice-l10n-en-gb* libreoffice-l10n-en-za* libreoffice-l10n-fr*
libservlet3.1-java* linux-headers-4.10.0-27*
linux-headers-4.10.0-27-generic* linux-headers-4.8.0-56*
linux-headers-4.8.0-56-generic* linux-headers-4.8.0-58*
linux-headers-4.8.0-58-generic* linux-image-4.10.0-27-generic*
linux-image-4.8.0-56-generic* linux-image-4.8.0-58-generic*
linux-image-extra-4.10.0-27-generic* linux-image-extra-4.8.0-56-generic*
linux-image-extra-4.8.0-58-generic* linux-signed-image-4.10.0-27-generic*
linux-signed-image-4.8.0-56-generic* linux-signed-image-4.8.0-58-generic*
mythes-en-au*
0 mis à jour, 0 nouvellement installés, 30 à enlever et 0 non mis à jour.
Après cette opération, 1'094 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 355896 fichiers et répertoires déjà installés.)
Suppression de hyphen-en-gb (1:5.1.0-1ubuntu2.2) ...
Suppression de libcommons-logging-java (1.2-1+build1) ...
Suppression de libcommons-parent-java (39-3) ...
Suppression de libapache-pom-java (10-2build1) ...
Suppression de libbsh-java (2.0b4-17ubuntu1) ...
Suppression de libhsqldb1.8.0-java (1.8.0.10+dfsg-6) ...
Suppression de libllvm3.8:i386 (1:3.8-2ubuntu4) ...
Suppression de libreoffice-help-en-gb (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libreoffice-help-en-us (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libreoffice-help-fr (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libreoffice-l10n-en-gb (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libreoffice-l10n-en-za (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libreoffice-l10n-fr (1:5.4.0~rc3-0ubuntu0.16.04.1~lo1) ...
Suppression de libservlet3.1-java (8.0.32-1ubuntu1.4) ...
Suppression de linux-headers-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Suppression de linux-headers-4.10.0-27 (4.10.0-27.30~16.04.2) ...
Suppression de linux-headers-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Suppression de linux-headers-4.8.0-56 (4.8.0-56.61~16.04.1) ...
Suppression de linux-headers-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Suppression de linux-headers-4.8.0-58 (4.8.0-58.63~16.04.1) ...
Suppression de linux-signed-image-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-27-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-27-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-56-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-56-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-signed-image-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Suppression de linux-image-extra-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
update-initramfs: Generating /boot/initrd.img-4.10.0-27-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-27-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-27-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-56-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-56-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-extra-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Suppression de linux-image-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
update-initramfs: Deleting /boot/initrd.img-4.10.0-27-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-56-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-56-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-4.10.0-27-generic (4.10.0-27.30~16.04.2) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.10.0-27-generic /boot/vmlinuz-4.10.0-27-generic
Suppression de linux-signed-image-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-56-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-56-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-signed-image-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Suppression de linux-image-extra-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
update-initramfs: Generating /boot/initrd.img-4.8.0-56-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-56-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-56-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-extra-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Suppression de linux-image-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
update-initramfs: Deleting /boot/initrd.img-4.8.0-56-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-4.8.0-56-generic (4.8.0-56.61~16.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.8.0-56-generic /boot/vmlinuz-4.8.0-56-generic
Suppression de linux-signed-image-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-signed-image-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Suppression de linux-image-extra-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
update-initramfs: Generating /boot/initrd.img-4.8.0-58-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Image Linux trouvée : /boot/vmlinuz-4.8.0-58-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.8.0-58-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-extra-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Suppression de linux-image-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
update-initramfs: Deleting /boot/initrd.img-4.8.0-58-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.10.0-32-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-32-generic
Image Linux trouvée : /boot/vmlinuz-4.10.0-30-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-30-generic
Adding boot menu entry for EFI firmware configuration
fait
Purge des fichiers de configuration de linux-image-4.8.0-58-generic (4.8.0-58.63~16.04.1) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.8.0-58-generic /boot/vmlinuz-4.8.0-58-generic
Suppression de mythes-en-au (2.1-5.4) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu9) ...
sieber@sieber:~$
Du coup qu'il y a eu plusieurs fois cela de suite: Est-ce que c'est mauvais signe quand il n'y a aucun retour (comme là dessous) ou est-ce qu'il a simplement fait le job?
sieber@sieber:~$ sudo service zram-config stop
sieber@sieber:~$
sieber@sieber:~$ sudo apt remove --purge zram-config
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
zram-config*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 55.3 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 254103 fichiers et répertoires déjà installés.)
Suppression de zram-config (0.5) ...
Purge des fichiers de configuration de zram-config (0.5) ...
sieber@sieber:~$ echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-sysctl.conf
vm.swappiness=5
sieber@sieber:~$
sieber@sieber:~$ echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-sysctl.conf
vm.vfs_cache_pressure=50
sieber@sieber:~$
sieber@sieber:~$ sudo sysctl -p /etc/sysctl.d/99-sysctl.conf
vm.swappiness = 5
vm.vfs_cache_pressure = 50
sieber@sieber:~$
Je vais redémarrer, faire la suite et je vous redonne un retour!
Hors ligne
#7 Le 18/08/2017, à 15:31
- QLSVB
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Jusqu'ici le bug qui se manifeste lorsque deux fenêtre d'un même programme sont ouvertes demeure. Il y a même une nouvelle variante. En cliquant sur la fenêtre derrière celle en premier plan ne la fait plus passer devant. Il faut que je réduise la première...
Je continue:
sieber@sieber:~$ sudo dmidecode -t 16
[sudo] Mot de passe de sieber :
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0036, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
sieber@sieber:~$
sudo dmidecode -t 17
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0037, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0036
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: SODIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Samsung
Serial Number: 9783F6A7
Asset Tag: 9876543210
Part Number: M471B1G73DB0-YK0
Rank: Unknown
Configured Clock Speed: 1333 MHz
Handle 0x0038, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0036
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM1
Bank Locator: BANK 1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: 9876543210
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Handle 0x0039, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0036
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: 9876543210
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Handle 0x003A, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0036
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM1
Bank Locator: BANK 3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: 9876543210
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
sieber@sieber:~$
grep SwapTotal /proc/meminfo
SwapTotal: 8261628 kB
sieber@sieber:~$
sieber@sieber:~$ echo $XDG_CURRENT_DESKTOP
Unity
sieber@sieber:~$
sieber@sieber:~$ ls -l /usr/share/xsessions
total 4
-rw-r--r-- 1 root root 204 aoû 22 2016 ubuntu.desktop
sieber@sieber:~$
Je redémarre encore...
Hors ligne
#8 Le 18/08/2017, à 15:35
- QLSVB
Re : [RESOLU] diagnostiquer si le système contient des bugs?
ça bug toujours.
Hors ligne
#9 Le 18/08/2017, à 15:40
- nam1962
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Certaines commandes (comme rm qui efface) ne donnent pas de retour, donc c'est normal.
Tu as 8Go de RAM, le problème ne peut venir de là.
On va voir si c'est unity qui fait la tête :
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install --reinstall unity
dconf reset -f /org/compiz/ && setsid unity
[ Modéré ]
Hors ligne
#10 Le 18/08/2017, à 16:23
- QLSVB
Re : [RESOLU] diagnostiquer si le système contient des bugs?
sieber@sieber:~$ sudo apt-get install --reinstall ubuntu-desktop
[sudo] Mot de passe de sieber :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 3'616 o dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de:1 http://ubuntu.ethz.ch/ubuntu xenial/main amd64 ubuntu-desktop amd64 1.361 [3'616 B]
3'616 o réceptionnés en 0s (35.4 ko/s)
(Lecture de la base de données... 254097 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../ubuntu-desktop_1.361_amd64.deb ...
Dépaquetage de ubuntu-desktop (1.361) sur (1.361) ...
Paramétrage de ubuntu-desktop (1.361) ...
sieber@sieber:~$ sudo apt-get install --reinstall unity
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1'617 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de:1 http://ubuntu.ethz.ch/ubuntu xenial-updates/main amd64 unity amd64 7.4.0+16.04.20160906-0ubuntu1 [1'617 kB]
1'617 ko réceptionnés en 16s (96.5 ko/s)
(Lecture de la base de données... 254097 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../unity_7.4.0+16.04.20160906-0ubuntu1_amd64.deb ...
Dépaquetage de unity (7.4.0+16.04.20160906-0ubuntu1) sur (7.4.0+16.04.20160906-0ubuntu1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de unity (7.4.0+16.04.20160906-0ubuntu1) ...
sieber@sieber:~$ dconf reset -f /org/compiz/ && setsid unity
sieber@sieber:~$ unity-panel-service stop/waiting
unity7 stop/waiting
unity-panel-service start/running, process 3964
unity7 start/running, process 4096
La dernière entrée à généré exactement le même effet que le bug (disparition de toutes les pages puis réaparition et les pages internet sont devenues blanches) et du coup: CA MARCHE!!!:)
Mes icones dans la barre sont devenus plus gros mais je vais régler ça...
Pour ce qui est de l'origine de ce problème, sachant qu'il y à peine env. 4 mois que j'ai installé Ubuntu, est ce que tu vois quelques chose à éviter pour plus que ça ne se reproduise? Par exemple j'ai fait les réglages avec "unity tweak tool" est-ce qu'il pourrait être à l'origine de ça?
Quoi qu'il en soit, un grand merci! Je suis heureux de pouvoir à nouveau avancer avec une machine fonctionnelle!
Hors ligne
#11 Le 18/08/2017, à 17:05
- nam1962
Re : [RESOLU] diagnostiquer si le système contient des bugs?
Ravi pour toi
Effectivement, évite les outils de tweek, c'est juste bon pour W$ ce genre de logiciels !
Si tu as besoin d'aide pour des réglages particuliers, ouvre un fil !
[ Modéré ]
Hors ligne