Pages : 1
Discussion fermée
#1 Le 16/03/2017, à 18:27
- B_Peter
Accès disque non-stop depuis longtemps
Bonjour
Le disque dur tourne sans arrêt
C'est peut-être en lecture, mais c'est sans arrêt, eu point de freiner le système.
Tout à déjà été testé pour ce qui est dit ici https://forum.ubuntu-fr.org/viewtopic.php?id=1726791
Et ça continue
Ubuntu 16.04 LTS
Dernière modification par B_Peter (Le 16/03/2017, à 18:29)
Linux Ubuntu 22.04.2 LTS
12th Gen Intel® Core™ i7-1260P × 16
64,0 Gio / Mesa Intel® Graphics (ADL GT2) Intel IRIS Xe
Hors ligne
#2 Le 17/03/2017, à 07:36
- tarkan99
Re : Accès disque non-stop depuis longtemps
Salut !
si tu as tout suivi du lien, tu as du installer iotop
peux-tu donner le retour de
sudo iotop -oPa
et de
uname -a
et de
free
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#3 Le 17/03/2017, à 12:08
- B_Peter
Re : Accès disque non-stop depuis longtemps
Salut !
si tu as tout suivi du lien, tu as du installer iotop
peux-tu donner le retour desudo iotop -oPa
http://www.terraburg.org/gallery/image. … w=no_count
http://www.terraburg.org/gallery/image. … w=no_countet de
uname -a
-->>
Linux baudouin-X75A1 4.4.0-67-generic #88-Ubuntu SMP Wed Mar 8 16:34:45 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
et de
free
-->>
total utilisé libre partagé tamp/cache disponible Mem: 3929888 1130168 760072 403572 2039648 2085600 Partition d'échange: 4077564 0 4077564
Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre ou TDCT'Pix le permettent).
Et les retours de commandes sous forme de texte entre balises code (explications ici) sont largement préférables à des images : plus lisibles et exploitables et surtout beaucoup plus légers.
Dernière modification par cqfd93 (Le 17/03/2017, à 12:25)
Linux Ubuntu 22.04.2 LTS
12th Gen Intel® Core™ i7-1260P × 16
64,0 Gio / Mesa Intel® Graphics (ADL GT2) Intel IRIS Xe
Hors ligne
#4 Le 17/03/2017, à 13:43
- Cyralien
Re : Accès disque non-stop depuis longtemps
Pourquoi avoir ouvert une nouvelle discussion ? ……
Comment détermines-tu que le disque fait sans cesse des I/O ?
Edit : Tu n’as pas posté le retour de smartmontools qui était demandé dans la discussion précédente……
Dernière modification par Cyralien (Le 17/03/2017, à 13:47)
Hors ligne
#5 Le 17/03/2017, à 14:19
- B_Peter
Re : Accès disque non-stop depuis longtemps
Pourquoi avoir ouvert une nouvelle discussion ? ……
Comment détermines-tu que le disque fait sans cesse des I/O ?
Edit : Tu n’as pas posté le retour de smartmontools qui était demandé dans la discussion précédente……
Cette discussion ouverte avant que l'on réactive l'autre
Le bruit du disque, c'est sans arrêt et les ralentissements
Linux Ubuntu 22.04.2 LTS
12th Gen Intel® Core™ i7-1260P × 16
64,0 Gio / Mesa Intel® Graphics (ADL GT2) Intel IRIS Xe
Hors ligne
#6 Le 17/03/2017, à 14:34
- Cyralien
Re : Accès disque non-stop depuis longtemps
Peux-tu installer smartmontools :
sudo apt-get install smartmontools
Et donner le retour de cette commande :
sudo smartctl -a /dev/sda
Edit : si il y a plusieurs disques sur cette machine, adapte /dev/sda ou sdb ou sdc
Dernière modification par Cyralien (Le 17/03/2017, à 14:40)
Hors ligne
#7 Le 17/03/2017, à 14:53
- B_Peter
Re : Accès disque non-stop depuis longtemps
Peux-tu installer smartmontools :
sudo apt-get install smartmontools
Et donner le retour de cette commande :
sudo smartctl -a /dev/sda
Edit : si il y a plusieurs disques sur cette machine, adapte /dev/sda ou sdb ou sdc
baudouin@baudouin-X75A1:~$ sudo smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-67-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: Hitachi HTS545050A7E380
Serial Number: TM8512ZJ25HYBR
LU WWN Device Id: 5 000cca 71fdeb0ba
Firmware Version: GG2OA6C0
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Mar 17 13:53:07 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 105) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 220 220 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 095 095 000 Old_age Always - 8392
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 089 089 000 Old_age Always - 5093
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3341
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 123
193 Load_Cycle_Count 0x0012 088 088 000 Old_age Always - 129685
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 9/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 34
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 34 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 34 occurred at disk power-on lifetime: 4522 hours (188 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 11 df a2 a4 01 Error: ICRC, ABRT at LBA = 0x01a4a2df = 27566815
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 30 70 c0 a2 a4 40 00 00:02:01.690 READ FPDMA QUEUED
60 28 68 b8 92 a9 40 00 00:02:01.662 READ FPDMA QUEUED
60 40 60 60 c0 90 40 00 00:02:01.656 READ FPDMA QUEUED
60 10 58 f8 c8 97 40 00 00:02:01.655 READ FPDMA QUEUED
60 68 50 a0 83 90 40 00 00:02:01.645 READ FPDMA QUEUED
Error 33 occurred at disk power-on lifetime: 4396 hours (183 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 f0 10 38 17 00 Error: ICRC, ABRT at LBA = 0x00173810 = 1521680
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 68 00 48 1a 40 00 00:00:09.633 WRITE FPDMA QUEUED
61 00 60 00 40 1a 40 00 00:00:09.623 WRITE FPDMA QUEUED
61 00 58 00 38 1a 40 00 00:00:09.614 WRITE FPDMA QUEUED
61 00 50 00 30 1a 40 00 00:00:09.606 WRITE FPDMA QUEUED
61 00 48 00 28 1a 40 00 00:00:09.596 WRITE FPDMA QUEUED
Error 32 occurred at disk power-on lifetime: 4364 hours (181 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e7 62 10 05 Error: ICRC, ABRT at LBA = 0x051062e7 = 84959975
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 18 90 b0 39 7f 40 00 00:01:18.746 READ FPDMA QUEUED
60 00 88 a8 72 70 40 00 00:01:18.744 READ FPDMA QUEUED
60 18 80 a8 76 70 40 00 00:01:18.744 READ FPDMA QUEUED
60 e0 70 d0 38 7f 40 00 00:01:18.741 READ FPDMA QUEUED
60 00 60 78 74 70 40 00 00:01:18.729 READ FPDMA QUEUED
Error 31 occurred at disk power-on lifetime: 4360 hours (181 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 71 ef 63 ce 06 Error: ICRC, ABRT at LBA = 0x06ce63ef = 114189295
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b8 10 9a 90 40 00 00:00:04.876 READ FPDMA QUEUED
60 00 b0 60 63 ce 40 00 00:00:04.861 READ FPDMA QUEUED
60 00 a8 f8 61 ce 40 00 00:00:04.860 READ FPDMA QUEUED
60 00 98 f8 60 ce 40 00 00:00:04.860 READ FPDMA QUEUED
60 08 90 90 49 10 40 00 00:00:04.847 READ FPDMA QUEUED
Error 30 occurred at disk power-on lifetime: 4335 hours (180 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 20 d8 76 10 03 Error: ICRC, ABRT at LBA = 0x031076d8 = 51410648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 88 18 40 8f 40 00 01:03:03.431 WRITE FPDMA QUEUED
61 08 80 08 40 8f 40 00 01:03:03.431 WRITE FPDMA QUEUED
61 08 78 08 40 8f 40 00 01:03:03.430 WRITE FPDMA QUEUED
61 08 70 80 41 50 40 00 01:03:03.430 WRITE FPDMA QUEUED
61 08 68 20 57 4f 40 00 01:03:03.430 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Linux Ubuntu 22.04.2 LTS
12th Gen Intel® Core™ i7-1260P × 16
64,0 Gio / Mesa Intel® Graphics (ADL GT2) Intel IRIS Xe
Hors ligne
#8 Le 17/03/2017, à 15:04
- cqfd93
Re : Accès disque non-stop depuis longtemps
Modération
On ferme ! La suite sur l'autre fil.
− cqfd93 −
Hors ligne
Pages : 1
Discussion fermée