#1 Le 28/06/2016, à 13:30
- Crestey
[Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonjour à tous,
Je suis passé à 16.04 sur 2 PC de chez moi, et l'un d'eux est très lent au démarrage.
J'ai un peu fouillé. Il y a beaucoup de cas. Et je ne sais pas trop comment investiguer.
Description :
Quand je boot (après le grub) :
à 0mn46s : l'écran ubuntu avec les 5 points qui défilent apparaît
à 3mn00s : un écran noir avec plein de ligne de texte "OK" sauf une ligne avec écrit : depency fail for pNFS block (mais je ne sais pas si c'est important).
à 3mn24s : écran login normal m'invitant à rentrer nom et mot de passe.
Ensuite, le PC met 52 secondes à me donner la main sur l'écran unity (ouf ... enfin !)
Ma config est celle là (j'ai 2Go de mémoire) :
crestey@PC4:~$ lscpu
Architecture: i686
Mode(s) opératoire(s) des processeurs :32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) par cœur : 1
Cœur(s) par socket : 2
Socket(s): 1
Identifiant constructeur :GenuineIntel
Famille de processeur :6
Modèle : 23
Model name: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz
Révision : 6
Vitesse du processeur en MHz :1596.000
CPU max MHz: 2660,0000
CPU min MHz: 1596,0000
BogoMIPS: 5333.46
Cache L1d : 32K
Cache L1i : 32K
Cache L2 : 3072K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dtherm
crestey@PC4:~$Auriez-vous une piste SVP ?
Dernière modification par Crestey (Le 30/06/2016, à 10:11)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#2 Le 28/06/2016, à 13:51
- nam1962
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Avec 2Go, je te conseille une Xubuntu 32bits : ftp://ftp.free.fr/mirrors/ftp.xubuntu.c … p-i386.iso
Tu peux aussi nous donner le retour de
dmesgjuste après démarrage (mais ça ne changera pas ma reco)
[ Modéré ]
Hors ligne
#3 Le 28/06/2016, à 15:03
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonjour nam1962 et merci.
Voici le retour de commande juste après power on.
crestey@PC4:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-24-generic (buildd@lcy01-30) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:25:16 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL/1600, BIOS 0512 03/16/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33cd6000-0x35e62fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB6D0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007FF90000 000034 (v01 031609 RSDT1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FF90200 000084 (v02 031609 FACP1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FF905C0 0066E7 (v01 A1016 A1016000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000007FF90390 00006C (v01 031609 APIC1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FF90400 00003C (v01 031609 OEMMCFG 20090316 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FF9E040 000061 (v01 031609 OEMB1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000007ff8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff]
[ 0.000000] On node 0 totalpages: 524078
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 295826 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f678b000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521848
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=7effdd07-c5f6-44ef-9480-e70fe0fccc58 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ff90)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2026548K/2096312K available (7854K kernel code, 760K rwdata, 3116K rodata, 944K init, 800K bss, 69764K reserved, 0K cma-reserved, 1183304K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b78000 - 0xc1c64000 ( 944 kB)
.data : 0xc17abbd3 - 0xc1b76280 (3881 kB)
.text : 0xc1000000 - 0xc17abbd3 (7854 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f6038000 soft=f603a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_ext
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.793 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.58 BogoMIPS (lpj=10667172)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004025] ACPI: Core revision 20150930
[ 0.011555] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.011574] Security Framework initialized
[ 0.011577] Yama: becoming mindful.
[ 0.011600] AppArmor: AppArmor initialized
[ 0.011637] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011639] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011868] Initializing cgroup subsys io
[ 0.011873] Initializing cgroup subsys memory
[ 0.011881] Initializing cgroup subsys devices
[ 0.011884] Initializing cgroup subsys freezer
[ 0.011887] Initializing cgroup subsys net_cls
[ 0.011890] Initializing cgroup subsys perf_event
[ 0.011893] Initializing cgroup subsys net_prio
[ 0.011895] Initializing cgroup subsys hugetlb
[ 0.011900] Initializing cgroup subsys pids
[ 0.011921] CPU: Physical Processor ID: 0
[ 0.011922] CPU: Processor Core ID: 0
[ 0.011928] mce: CPU supports 6 MCE banks
[ 0.011936] CPU0: Thermal monitoring enabled (TM2)
[ 0.011940] process: using mwait in idle threads
[ 0.011947] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.011949] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.012598] Freeing SMP alternatives memory: 28K (c1c64000 - c1c6b000)
[ 0.016005] ftrace: allocating 31196 entries in 61 pages
[ 0.024099] smpboot: Max logical packages: 2
[ 0.024104] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.024108] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068000] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms
[ 0.068000] APIC delta adjusted to PM-Timer: 1666662 (2000112)
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] CPU 1 irqstacks, hard=f63c4000 soft=f63c6000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] microcode: CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.008000] Initializing CPU#1
[ 0.072042] x86: Booted up 1 node, 2 CPUs
[ 0.072048] smpboot: Total of 2 processors activated (10667.17 BogoMIPS)
[ 0.073761] devtmpfs: initialized
[ 0.073761] evm: security.selinux
[ 0.073761] evm: security.SMACK64
[ 0.073761] evm: security.SMACK64EXEC
[ 0.073761] evm: security.SMACK64TRANSMUTE
[ 0.073761] evm: security.SMACK64MMAP
[ 0.073761] evm: security.ima
[ 0.073761] evm: security.capability
[ 0.073761] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.073761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.073761] pinctrl core: initialized pinctrl subsystem
[ 0.073761] RTC time: 12:54:05, date: 06/28/16
[ 0.073761] NET: Registered protocol family 16
[ 0.073761] EISA bus registered
[ 0.084007] cpuidle: using governor ladder
[ 0.096004] cpuidle: using governor menu
[ 0.096009] PCCT header not found.
[ 0.096136] ACPI: bus type PCI registered
[ 0.096139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.096208] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.096211] PCI: not using MMCONFIG
[ 0.096556] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.096595] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.096597] PCI: Using configuration type 1 for base access
[ 0.096731] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.096732] mtrr: probably your BIOS does not setup all CPUs.
[ 0.096733] mtrr: corrected configuration.
[ 0.108093] ACPI: Added _OSI(Module Device)
[ 0.108095] ACPI: Added _OSI(Processor Device)
[ 0.108096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109778] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.112055] ACPI: Dynamic OEM Table Load:
[ 0.112060] ACPI: SSDT 0x00000000F633A000 000214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.112446] ACPI: Dynamic OEM Table Load:
[ 0.112450] ACPI: SSDT 0x00000000F3428800 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.112875] ACPI: Interpreter enabled
[ 0.112890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.112894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.112906] ACPI: (supports S0 S3 S4 S5)
[ 0.112908] ACPI: Using IOAPIC for interrupt routing
[ 0.112936] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.113873] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.113875] PCI: Using MMCONFIG for extended config space
[ 0.113882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.119618] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119623] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.119854] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119858] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.120061] PCI host bridge to bus 0000:00
[ 0.120064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.120066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.120068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.120070] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.120072] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
[ 0.120075] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.120084] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.120186] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.120224] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120265] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.120337] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.120362] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.120416] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120496] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.120533] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
[ 0.120604] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.120650] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.120688] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.120756] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.120804] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.120841] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
[ 0.120909] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.120957] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.120994] pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.121062] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.121116] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.121139] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.121203] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121244] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.121290] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.121367] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.121417] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.121497] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.121504] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.121509] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.121512] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.121604] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.121617] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.121626] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.121634] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
[ 0.121642] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
[ 0.121650] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.121668] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.121669] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.121671] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.121673] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.121750] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.121766] pci 0000:00:1f.2: reg 0x10: [io 0xc400-0xc407]
[ 0.121773] pci 0000:00:1f.2: reg 0x14: [io 0xc080-0xc083]
[ 0.121780] pci 0000:00:1f.2: reg 0x18: [io 0xc000-0xc007]
[ 0.121787] pci 0000:00:1f.2: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.121794] pci 0000:00:1f.2: reg 0x20: [io 0xb880-0xb88f]
[ 0.121822] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121903] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.121952] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.122085] pci 0000:01:00.0: [1002:9440] type 00 class 0x030000
[ 0.122107] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122117] pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff 64bit]
[ 0.122124] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.122136] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.122160] pci 0000:01:00.0: supports D1 D2
[ 0.122210] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[ 0.122232] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.122279] pci 0000:01:00.1: supports D1 D2
[ 0.122338] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122341] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.122344] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.122348] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122397] pci 0000:02:05.0: [10ec:8167] type 00 class 0x020000
[ 0.122418] pci 0000:02:05.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.122427] pci 0000:02:05.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
[ 0.122464] pci 0000:02:05.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.122486] pci 0000:02:05.0: supports D1 D2
[ 0.122488] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.122565] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.122569] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.122572] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.122577] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.122580] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.122582] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.122584] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.122586] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff window] (subtractive decode)
[ 0.122594] pci_bus 0000:00: on NUMA node 0
[ 0.123380] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123437] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123493] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.123548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.123603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123772] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.123828] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.123923] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.123923] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123923] vgaarb: loaded
[ 0.123923] vgaarb: bridge control possible 0000:01:00.0
[ 0.124263] SCSI subsystem initialized
[ 0.124300] libata version 3.00 loaded.
[ 0.124328] ACPI: bus type USB registered
[ 0.124350] usbcore: registered new interface driver usbfs
[ 0.124362] usbcore: registered new interface driver hub
[ 0.124376] usbcore: registered new device driver usb
[ 0.124497] PCI: Using ACPI for IRQ routing
[ 0.124497] PCI: pci_cache_line_size set to 64 bytes
[ 0.124497] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.124497] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.124497] NetLabel: Initializing
[ 0.124497] NetLabel: domain hash size = 128
[ 0.124497] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.124497] NetLabel: unlabeled traffic allowed by default
[ 0.124497] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.124497] hpet clockevent registered
[ 0.124497] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124497] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126201] clocksource: Switched to clocksource hpet
[ 0.133139] AppArmor: AppArmor Filesystem Enabled
[ 0.133240] pnp: PnP ACPI init
[ 0.133350] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.133355] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.133437] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133691] pnp 00:02: [dma 2]
[ 0.133741] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.134035] pnp 00:03: [dma 3]
[ 0.134155] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.134220] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.134224] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134342] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.134345] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.134348] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.134350] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134353] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.134356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134468] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.134472] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134549] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134552] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134555] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134792] pnp 00:08: [dma 0 disabled]
[ 0.134861] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134927] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135103] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135106] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.135109] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.135111] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.135114] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135240] pnp: PnP ACPI: found 11 devices
[ 0.135245] PnPBIOS: Disabled by ACPI PNP
[ 0.172105] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.172129] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.172134] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.172137] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.172141] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.172144] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172148] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.172151] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.172155] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.172163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.172167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172169] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172171] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172173] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.172175] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.172177] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172180] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.172182] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.172184] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172186] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.172188] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172190] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172192] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172223] NET: Registered protocol family 2
[ 0.172432] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.172452] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.172483] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.172520] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172576] NET: Registered protocol family 1
[ 0.173137] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.173143] PCI: CLS 32 bytes, default 64
[ 0.173197] Trying to unpack rootfs image as initramfs...
[ 0.754781] Freeing initrd memory: 34356K (f3cd6000 - f5e63000)
[ 0.755055] Scanning for low memory corruption every 60 seconds
[ 0.755537] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.755597] audit: initializing netlink subsys (disabled)
[ 0.755624] audit: type=2000 audit(1467118444.752:1): initialized
[ 0.755966] Initialise system trusted keyring
[ 0.756138] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.758124] zbud: loaded
[ 0.758234] VFS: Disk quotas dquot_6.6.0
[ 0.758280] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.758839] fuse init (API version 7.23)
[ 0.759019] Key type big_key registered
[ 0.759038] Allocating IMA MOK and blacklist keyrings.
[ 0.759402] Key type asymmetric registered
[ 0.759406] Asymmetric key parser 'x509' registered
[ 0.759422] bounce: pool size: 64 pages
[ 0.759466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.759496] io scheduler noop registered
[ 0.759499] io scheduler deadline registered (default)
[ 0.759536] io scheduler cfq registered
[ 0.759864] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.759867] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.759869] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.759872] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.759880] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759888] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.759923] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.759925] vesafb: scrolling: redraw
[ 0.759927] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.759946] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 5824k, total 5824k
[ 0.760089] Console: switching to colour frame buffer device 175x65
[ 0.760126] fb0: VESA VGA frame buffer device
[ 0.760143] intel_idle: does not run on family 6 model 23
[ 0.760232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.760238] ACPI: Power Button [PWRB]
[ 0.760289] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.760291] ACPI: Power Button [PWRF]
[ 0.760462] GHES: HEST is not enabled!
[ 0.760486] isapnp: Scanning for PnP cards...
[ 0.760565] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780963] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782706] Linux agpgart interface v0.103
[ 0.790846] brd: module loaded
[ 0.792282] loop: module loaded
[ 0.792455] ata_piix 0000:00:1f.1: version 2.13
[ 0.793545] scsi host0: ata_piix
[ 0.793640] scsi host1: ata_piix
[ 0.793690] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.793692] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.793759] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.795025] scsi host2: ata_piix
[ 0.795190] scsi host3: ata_piix
[ 0.795241] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.795243] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.795345] libphy: Fixed MDIO Bus: probed
[ 0.795348] tun: Universal TUN/TAP device driver, 1.6
[ 0.795349] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795398] PPP generic driver version 2.4.2
[ 0.795466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795472] ehci-pci: EHCI PCI platform driver
[ 0.795555] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.795562] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.795573] ehci-pci 0000:00:1d.7: debug port 1
[ 0.799468] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.799478] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.808012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.808086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808090] usb usb1: Product: EHCI Host Controller
[ 0.808092] usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 0.808094] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.808219] hub 1-0:1.0: USB hub found
[ 0.808227] hub 1-0:1.0: 8 ports detected
[ 0.808447] ehci-platform: EHCI generic platform driver
[ 0.808461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.808466] ohci-pci: OHCI PCI platform driver
[ 0.808481] ohci-platform: OHCI generic platform driver
[ 0.808491] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.808557] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.808563] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.808569] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.808586] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.808634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808636] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808638] usb usb2: Product: UHCI Host Controller
[ 0.808640] usb usb2: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.808642] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.808755] hub 2-0:1.0: USB hub found
[ 0.808763] hub 2-0:1.0: 2 ports detected
[ 0.808918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.808924] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.808929] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.808945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.808993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808997] usb usb3: Product: UHCI Host Controller
[ 0.808999] usb usb3: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809000] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.809116] hub 3-0:1.0: USB hub found
[ 0.809125] hub 3-0:1.0: 2 ports detected
[ 0.809278] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.809286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.809291] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.809313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.809360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809364] usb usb4: Product: UHCI Host Controller
[ 0.809366] usb usb4: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809368] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.809480] hub 4-0:1.0: USB hub found
[ 0.809487] hub 4-0:1.0: 2 ports detected
[ 0.809640] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.809645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.809651] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.809673] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.809721] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809723] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809725] usb usb5: Product: UHCI Host Controller
[ 0.809727] usb usb5: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809729] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.809845] hub 5-0:1.0: USB hub found
[ 0.809852] hub 5-0:1.0: 2 ports detected
[ 0.810025] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.812886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.812891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.813036] mousedev: PS/2 mouse device common for all mice
[ 0.813178] rtc_cmos 00:01: RTC can wake from S4
[ 0.813289] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.813309] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.813319] i2c /dev entries driver
[ 0.813381] device-mapper: uevent: version 1.0.3
[ 0.813451] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.813479] platform eisa.0: Probing EISA bus 0
[ 0.813482] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.813484] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.813486] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.813487] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.813489] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.813491] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.813493] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.813495] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.813497] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.813499] platform eisa.0: EISA: Detected 0 cards
[ 0.813514] cpufreq-nforce2: No nForce2 chipset.
[ 0.813524] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.813834] NET: Registered protocol family 10
[ 0.814097] NET: Registered protocol family 17
[ 0.814109] Key type dns_resolver registered
[ 0.814335] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814342] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814377] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.814388] Using IPI No-Shortcut mode
[ 0.814533] registered taskstats version 1
[ 0.814551] Loading compiled-in X.509 certificates
[ 0.817683] Loaded X.509 cert 'Build time autogenerated kernel key: 5e87f4b3aa9fd31ac3c1a96c0339b37184699ecc'
[ 0.817702] zswap: loaded using pool lzo/zbud
[ 0.819702] Key type trusted registered
[ 0.822882] Key type encrypted registered
[ 0.822888] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.822892] ima: No TPM chip found, activating TPM-bypass!
[ 0.822913] evm: HMAC attrs: 0x1
[ 0.823113] Magic number: 4:268:937
[ 0.823140] misc lightnvm: hash matches
[ 0.823164] platform PNP0103:00: hash matches
[ 0.823174] acpi PNP0103:00: hash matches
[ 0.823208] rtc_cmos 00:01: setting system clock to 2016-06-28 12:54:05 UTC (1467118445)
[ 0.823521] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.823523] EDD information not available.
[ 0.823580] PM: Hibernation image not present or could not be loaded.
[ 0.964458] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 0.964461] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.972341] ata3.00: configured for UDMA/133
[ 0.999545] ata4.00: ATA-8: MAXTOR STM3320613AS, MX15, max UDMA/133
[ 0.999547] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.999552] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
[ 1.055515] ata4.00: configured for UDMA/133
[ 1.068112] ata4.01: configured for UDMA/100
[ 1.069940] isapnp: No Plug & Play device found
[ 1.070065] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-19 PQ: 0 ANSI: 5
[ 1.070236] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.070280] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.070282] sd 2:0:0:0: [sda] Write Protect is off
[ 1.070284] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.070305] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.070400] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MX15 PQ: 0 ANSI: 5
[ 1.070591] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.070593] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.070647] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.070649] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.070669] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.071252] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
[ 1.096265] sdb: sdb1
[ 1.105898] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.105902] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.105988] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.106042] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 1.106100] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 1.120018] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.153351] sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3
[ 1.153848] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.154162] Freeing unused kernel memory: 944K (c1b78000 - c1c64000)
[ 1.154226] Write protecting the kernel text: 7856k
[ 1.154258] Write protecting the kernel read-only data: 3120k
[ 1.154259] NX-protecting the kernel data: 6480k
[ 1.164068] random: systemd-udevd urandom read with 20 bits of entropy available
[ 1.218484] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.225466] [drm] Initialized drm 1.1.0 20060810
[ 1.245758] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.245871] r8169 0000:02:05.0 (unnamed net_device) (uninitialized): not PCI Express
[ 1.246176] r8169 0000:02:05.0 eth0: RTL8169sc/8110sc at 0xf840ec00, 00:22:15:cb:d5:2a, XID 18000000 IRQ 18
[ 1.246179] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.253055] Floppy drive(s): fd0 is 1.44M
[ 1.253662] usb 1-1: New USB device found, idVendor=04f9, idProduct=0262
[ 1.253665] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.253667] usb 1-1: Product: MFC-J6510DW
[ 1.253669] usb 1-1: Manufacturer: Brother
[ 1.253671] usb 1-1: SerialNumber: BROM0F403383
[ 1.273765] FDC 0 is a post-1991 82077
[ 1.301397] r8169 0000:02:05.0 enp2s5: renamed from eth0
[ 1.324243] [drm] radeon kernel modesetting enabled.
[ 1.324301] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 1.324302] fb: switching to radeondrmfb from VESA VGA
[ 1.324338] Console: switching to colour dummy device 80x25
[ 1.325440] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[ 1.325452] [drm] register mmio base: 0xFEAE0000
[ 1.325453] [drm] register mmio size: 65536
[ 1.325544] ATOM BIOS: WEKIVA
[ 1.325578] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.325581] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 1.325583] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.325584] [drm] RAM width 256bits DDR
[ 1.325715] [TTM] Zone kernel: Available graphics memory: 439286 kiB
[ 1.325717] [TTM] Zone highmem: Available graphics memory: 1030938 kiB
[ 1.325718] [TTM] Initializing pool allocator
[ 1.325724] [TTM] Initializing DMA pool allocator
[ 1.325745] [drm] radeon: 512M of VRAM memory ready
[ 1.325746] [drm] radeon: 1024M of GTT memory ready.
[ 1.325760] [drm] Loading RV770 Microcode
[ 1.325834] [drm] Internal thermal controller with fan control
[ 1.325876] [drm] radeon: power management initialized
[ 1.325964] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.352418] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[ 1.352498] radeon 0000:01:00.0: WB enabled
[ 1.352503] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc1cc00
[ 1.352506] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc1cc0c
[ 1.353731] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xf9016230
[ 1.353750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.353752] [drm] Driver supports precise vblank timestamp query.
[ 1.353754] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.353791] radeon 0000:01:00.0: radeon: using MSI.
[ 1.353819] [drm] radeon: irq initialized.
[ 1.399787] [drm] ring test on 0 succeeded in 1 usecs
[ 1.399794] [drm] ring test on 3 succeeded in 2 usecs
[ 1.468382] usb-storage 1-1:1.3: USB Mass Storage device detected
[ 1.468463] scsi host4: usb-storage 1-1:1.3
[ 1.468758] usbcore: registered new interface driver usb-storage
[ 1.472858] usbcore: registered new interface driver uas
[ 1.574454] [drm] ring test on 5 succeeded in 1 usecs
[ 1.574473] [drm] UVD initialized successfully.
[ 1.574690] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.574708] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.628021] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.752022] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[ 1.752029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[ 1.803077] usb 5-1: New USB device found, idVendor=0e8f, idProduct=00a5
[ 1.803082] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.803086] usb 5-1: Product: 2.4G RX
[ 1.803089] usb 5-1: Manufacturer: DaKai
[ 1.813367] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.858943] usbcore: registered new interface driver usbhid
[ 1.858946] usbhid: USB HID core driver
[ 1.863437] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0E8F:00A5.0001/input/input5
[ 1.916163] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input0
[ 1.917113] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0E8F:00A5.0002/input/input6
[ 1.972232] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input1
[ 2.220043] [drm] ib test on ring 5 succeeded
[ 2.220711] [drm] Radeon Display Connectors
[ 2.220712] [drm] Connector 0:
[ 2.220714] [drm] DVI-I-1
[ 2.220715] [drm] HPD2
[ 2.220717] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.220718] [drm] Encoders:
[ 2.220719] [drm] DFP1: INTERNAL_UNIPHY
[ 2.220720] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.220721] [drm] Connector 1:
[ 2.220722] [drm] DIN-1
[ 2.220723] [drm] Encoders:
[ 2.220725] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.220726] [drm] Connector 2:
[ 2.220727] [drm] DVI-I-2
[ 2.220728] [drm] HPD1
[ 2.220729] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.220730] [drm] Encoders:
[ 2.220731] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.220733] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 2.259122] random: nonblocking pool is initialized
[ 2.319528] [drm] fb mappable at 0xE0459000
[ 2.319530] [drm] vram apper at 0xE0000000
[ 2.319531] [drm] size 8294400
[ 2.319532] [drm] fb depth is 24
[ 2.319533] [drm] pitch is 7680
[ 2.319610] fbcon: radeondrmfb (fb0) is primary device
[ 2.319701] Console: switching to colour frame buffer device 210x65
[ 2.319749] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.328024] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 2.488480] scsi 4:0:0:0: Direct-Access Brother MFC-J6510DW 1.00 PQ: 0 ANSI: 2
[ 2.488808] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.522450] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.568349] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.752076] clocksource: Switched to clocksource tsc
[ 5.013153] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.013275] systemd[1]: Detected architecture x86.
[ 5.033478] systemd[1]: Set hostname to <PC4>.
[ 7.550631] systemd[1]: Listening on Syslog Socket.
[ 7.550827] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.550844] systemd[1]: Reached target Encrypted Volumes.
[ 7.550889] systemd[1]: Listening on Journal Socket.
[ 7.550997] systemd[1]: Created slice User and Session Slice.
[ 7.551012] systemd[1]: Reached target User and Group Name Lookups.
[ 7.551087] systemd[1]: Created slice System Slice.
[ 7.551177] systemd[1]: Created slice system-getty.slice.
[ 7.560163] systemd[1]: Started Read required files in advance.
[ 7.560804] systemd[1]: Mounting NFSD configuration filesystem...
[ 7.561359] systemd[1]: Started Braille Device Support.
[ 7.788168] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.788295] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.788780] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.788828] systemd[1]: Reached target Slices.
[ 7.789309] systemd[1]: Starting Uncomplicated firewall...
[ 7.789814] systemd[1]: Mounting Debug File System...
[ 7.790313] systemd[1]: Mounting RPC Pipe File System...
[ 7.790436] systemd[1]: Listening on Journal Audit Socket.
[ 7.790497] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.790552] systemd[1]: Listening on udev Control Socket.
[ 7.791065] systemd[1]: Mounting Huge Pages File System...
[ 7.791083] systemd[1]: PNFS blkmaping enablement. is not active.
[ 7.791191] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[ 7.791236] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[ 7.791294] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.791866] systemd[1]: Starting Journal Service...
[ 8.376168] systemd[1]: Starting Load Kernel Modules...
[ 8.376300] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.376450] systemd[1]: Listening on udev Kernel Socket.
[ 8.376568] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.378247] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.378527] systemd[1]: Started Uncomplicated firewall.
[ 8.428177] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.819162] systemd[1]: Mounted Debug File System.
[ 8.819262] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.819852] systemd[1]: Mounted Huge Pages File System.
[ 9.458565] lp: driver loaded but no devices found
[ 9.496165] ppdev: user-space parallel port driver
[ 9.498231] systemd[1]: Started Journal Service.
[ 9.616697] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.616786] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 9.701842] RPC: Registered named UNIX socket transport module.
[ 9.701845] RPC: Registered udp transport module.
[ 9.701847] RPC: Registered tcp transport module.
[ 9.701848] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.712170] lp0: using parport0 (interrupt-driven).
[ 10.130308] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.167535] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.550020] systemd-journald[246]: Received request to flush runtime journal from PID 1
[ 17.682588] intel_rng: FWH not detected
[ 17.800333] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.338613] leds_ss4200: no LED devices found
[ 20.219509] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 20.398411] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.398852] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 20.500166] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.760744] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 20.760748] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.760751] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 20.760753] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 20.760754] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 20.760756] snd_hda_codec_via hdaudioC0D0: inputs:
[ 20.760759] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 20.760761] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 20.760763] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 20.760765] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 20.766822] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.766900] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.766973] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 20.767047] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 20.767120] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 20.767193] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 20.767271] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 20.767345] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 20.800040] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.867329] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 21.100056] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.368386] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 21.368417] usbcore: registered new interface driver usblp
[ 21.400033] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.700044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.000037] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.300041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.600034] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.900041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.231852] Adding 2048252k swap on /dev/sda6. Priority:-1 extents:1 across:2048252k FS
[ 25.567630] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 27.176189] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 27.476078] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 27.776036] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.076047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.376039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.676039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.976034] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.276033] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.576032] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 39.149640] audit: type=1400 audit(1467118483.824:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=665 comm="apparmor_parser"
[ 39.149651] audit: type=1400 audit(1467118483.824:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser"
[ 39.149658] audit: type=1400 audit(1467118483.824:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=665 comm="apparmor_parser"
[ 39.149664] audit: type=1400 audit(1467118483.824:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser"
[ 39.237078] audit: type=1400 audit(1467118483.912:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=664 comm="apparmor_parser"
[ 39.237087] audit: type=1400 audit(1467118483.912:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=664 comm="apparmor_parser"
[ 52.686643] audit: type=1400 audit(1467118497.360:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=668 comm="apparmor_parser"
[ 53.289459] audit: type=1400 audit(1467118497.960:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=666 comm="apparmor_parser"
[ 53.289473] audit: type=1400 audit(1467118497.960:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=666 comm="apparmor_parser"
[ 53.289479] audit: type=1400 audit(1467118497.960:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=666 comm="apparmor_parser"
[ 53.289485] audit: type=1400 audit(1467118497.960:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=666 comm="apparmor_parser"
[ 53.289491] audit: type=1400 audit(1467118497.960:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=666 comm="apparmor_parser"
[ 53.289497] audit: type=1400 audit(1467118497.960:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=666 comm="apparmor_parser"
[ 54.964198] audit: type=1400 audit(1467118499.636:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=670 comm="apparmor_parser"
[ 54.967319] audit: type=1400 audit(1467118499.636:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=672 comm="apparmor_parser"
[ 54.967328] audit: type=1400 audit(1467118499.636:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=672 comm="apparmor_parser"
[ 61.095390] audit_printk_skb: 6 callbacks suppressed
[ 61.095393] audit: type=1400 audit(1467118505.768:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-digikam" pid=674 comm="apparmor_parser"
[ 61.095402] audit: type=1400 audit(1467118505.768:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=674 comm="apparmor_parser"
[ 61.097451] audit: type=1400 audit(1467118505.768:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=677 comm="apparmor_parser"
[ 61.473534] audit: type=1400 audit(1467118506.148:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=669 comm="apparmor_parser"
[ 61.473544] audit: type=1400 audit(1467118506.148:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=669 comm="apparmor_parser"
[ 71.023569] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 71.153276] NFSD: starting 90-second grace period (net c1b489c0)
[ 72.061272] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 72.072860] r8169 0000:02:05.0 enp2s5: link down
[ 72.072861] r8169 0000:02:05.0 enp2s5: link down
[ 72.072898] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 72.606917] usblp1: removed
[ 72.609693] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 73.712271] r8169 0000:02:05.0 enp2s5: link up
[ 73.712288] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
[ 79.097409] FS-Cache: Loaded
[ 79.159870] FS-Cache: Netfs 'nfs' registered for caching
[ 169.574164] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 169.577394] vboxdrv: Found 2 processor cores
[ 169.577687] vboxdrv: fAsync=0 offMin=0x1f4 offMax=0x7bc
[ 169.677816] vboxdrv: TSC mode is Synchronous, tentative frequency 2666321373 Hz
[ 169.677819] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000)
[ 169.683435] VBoxNetFlt: Successfully started.
[ 169.687546] VBoxNetAdp: Successfully started.
[ 169.692452] VBoxPciLinuxInit
[ 169.698102] vboxpci: IOMMU not found (not registered)
[ 204.577486] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 204.876044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.176047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.476045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.776046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.076046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.376046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.680828] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.980240] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
crestey@PC4:~$ J'essaierai Xubuntu. J'ai quand même un doute sur l'insuffisance de ram que tu soulèves car mon autre PC a la même chose et démarre 4 fois plus vite, ce qui est encore un peu lent, c'est vrai.
Dernière modification par Crestey (Le 28/06/2016, à 15:04)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#4 Le 28/06/2016, à 15:11
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Je viens de faire un test qui renforce mon doute.
Je te réponds actuellement avec ce même PC qui est en dual boot avec ubuntu14.04 (au lieu du 16.04 qui pose problème).
Et là, le temps total est de 1mn30 ( de grub à l'écran de unity) au lieu des 4mn16 total décrit en #1. (c'est à dire environ le temps de mon autre PC qui a aussi 2Go)
Dernière modification par Crestey (Le 28/06/2016, à 15:12)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#5 Le 28/06/2016, à 15:13
- nam1962
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Dans les 2 cas une Xub 32 bits te transformera la vie avec moins de 3Go de RAM
Pour celui ci, je te conseilles de passer un smartcontrol en plus : https://doc.ubuntu-fr.org/smartmontools
Il serait aussi bien d'avoir l'audit d'une bonne âme spécialiste en lecture de dmesg 
Dernière modification par nam1962 (Le 28/06/2016, à 15:14)
[ Modéré ]
Hors ligne
#6 Le 28/06/2016, à 16:13
- littlejohn75
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Crestey a écrit :
[ 71.023569] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 71.153276] NFSD: starting 90-second grace period (net c1b489c0)
Que vient faire un serveur NFS sur une machine avec 2Go de RAM !
Crestey a écrit :
[ 169.574164] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 169.577394] vboxdrv: Found 2 processor cores
[ 169.577687] vboxdrv: fAsync=0 offMin=0x1f4 offMax=0x7bc
[ 169.677816] vboxdrv: TSC mode is Synchronous, tentative frequency 2666321373 Hz
[ 169.677819] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000)
[ 169.683435] VBoxNetFlt: Successfully started.
[ 169.687546] VBoxNetAdp: Successfully started.
[ 169.692452] VBoxPciLinuxInit
Et VirtualBox pendant qu'on y est !
Sur une machine avec 32Go de RAM
frpe@drsoseng:~$ lsmod | sort | less
...
usbhid 53248 0
usb_storage 69632 1 uas
vboxdrv 450560 4 vboxnetadp,vboxnetflt,vboxpci
vboxnetadp 28672 0
vboxnetflt 28672 1
vboxpci 24576 0
wmi 20480 0
...
frpe@drsoseng:~$ cat /proc/3521/cmdline | tr '\0' '\n'
/usr/lib/virtualbox/VirtualBox
--comment
win7
--startvm
1471b210-e106-4059-822b-834356be0c65
frpe@drsoseng:~$ cat /proc/3521/statm
1105878 583493 568188 8 0 356062 0
frpe@drsoseng:~$ free -m
total used free shared buffers cached
Mem: 32098 30322 1776 71 3264 18341
-/+ buffers/cache: 8716 23381
Swap: 0 0 0Le processus N° 3521 utilise
VmPeak: 4438616 kB
VmSize: 4424024 kBPourquoi diantre avez-vous installé Virtualbox ? (ou tout au moins les pilotes noyaux )
Pourquoi diantre les utilisateurs Ubuntu se comportent comme des cowboys avec leur système ? 
(Sur la machine Ubuntu du docteur Soseng il ya déjà eu le OOM killer qui se met en route et qui affiche par exemple qu'un truc bluetooth serait un bon candidat alors que cette machine tour n'est pas équipée de bluetooth ).
Bref, installer ubuntu à la rache comme vous le faites est un bon moyen d'avoir des ennuis.
Cordialement,
Regards,
Mit freundlichen Grüssen,
مع تحياتي الخالصة
---
F. Petitjean
Ingénieur civil du Génie Maritime.
Bureau Veritas
Département Recherche, le département de l'excellence technique.
« Un ordinateur c'est comme un frigo : on le branche et ça marche. »
Laurent Serano Directeur informatique, réunion Délégués du Personnel 2010
Hors ligne
#7 Le 28/06/2016, à 16:37
- grandtoubab
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
salut
Avec systemd pour avoir des infos
sudo systemd-analyzepour voir l'enchainement du démarrage des services
sudo systemd-analyze blamepour se faire un graphique
sudo systemd-analyze plot > systemd.svget ouvrir systemd.svg avec Firefox pour un confort de lecture
https://www.freedesktop.org/software/sy … alyze.html
Dernière modification par grandtoubab (Le 28/06/2016, à 16:46)
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#8 Le 28/06/2016, à 17:57
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
littlejohn75 a écrit :
Que vient faire un serveur NFS sur une machine avec 2Go de RAM !
J'ai un NAS monté en serveur NFS pour les besoins de sauvegarde de ma petite famille.
Ce n'est peut-être pas monté idéalement mais ça fonctionne bien depuis quelques années sur plusieurs machines différentes avec 2Go de ram seulement.
littlejohn75 a écrit :
Pourquoi diantre avez-vous installé Virtualbox ? (ou tout au moins les pilotes noyaux )
J'utilise virtualbox pour résoudre ce ventre-saint-gris de problème là.
VBox me permet simplement de gérer le site de mon club de tennis car l'outil mis à disposition par la fédération française de tennis ne tourne que sous internet explorer, que j'ai donc fait tourner sous xp lui même sous VB.
C'est ce monsieur qui m'a gentiment donné l'idée en mai 2013. Ça marche très bien depuis 3 ans. Et je peux ainsi gérer le site de mon club de tennis sans rebooter sur Windows.
Mon seul problème est que un (et un seul) de mes PC démarre lentement depuis (et seulement depuis) que je suis passé à 16.04. Avant tout marchait nickel.
D'ailleurs une manière de résoudre provisoirement mon problème est de rester sur 14.04.
littlejohn75 a écrit :
Pourquoi diantre les utilisateurs Ubuntu se comportent comme des cowboys avec leur système ?
Eh bien cornegidouille, comme tu y vas ! Le ton est peut-être inutilement décalé, non ?
littlejohn75 a écrit :
Bref, installer ubuntu à la rache comme vous le faites est un bon moyen d'avoir des ennuis.
Merci encore pour ta gentillesse et ton aide précieuse. Sinon on dit "à l'arrache" je crois. (Mais, phonétiquement on comprend quand même, donc pas de soucis ).
Dernière modification par Crestey (Le 28/06/2016, à 18:37)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#9 Le 28/06/2016, à 18:18
- grandtoubab
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Pour utiliser Internet Explorer il y a aussi la solution wine qui est peut-etre plus légère
https://doc.ubuntu-fr.org/wine
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#10 Le 28/06/2016, à 18:33
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
grandtoubab a écrit :
Pour utiliser Internet Explorer il y a aussi la solution wine qui est peut-etre plus légère
Oui j'avais essayé à l'époque et je n'avais pas réussi. Je peux réessayer.
Dernière modification par Crestey (Le 28/06/2016, à 18:38)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#11 Le 28/06/2016, à 18:46
- nam1962
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
As tu teste ton HDD ?
[ Modéré ]
Hors ligne
#12 Le 28/06/2016, à 20:07
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
nam1962 a écrit :
As tu teste ton HDD ?
Non je ne l'ai pas fait. Cependant comme ça marche bien avec 14.04
Dernière modification par Crestey (Le 28/06/2016, à 20:08)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#13 Le 28/06/2016, à 20:21
- nam1962
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
... la coïncidence d'une panne et d'un changement de version est toujours troublante, mais c'est un hasard.
Teste ton HDD, on sera surs.
[ Modéré ]
Hors ligne
#14 Le 28/06/2016, à 20:45
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Tu as raison je vais le tester. En attendant, je viens d'avoir une idée qui peut faire avancer : J'ai fait un dmesg avec 14.04 (en dual boot) pour comparer avec celui du 16.04
Les 2 dmesg sont avec le même PC, même HDD, installation similare (VB pour les 2, NFS pour les 2, même SW installés, etc). S'il y a des différences elles sont mineures.
Le 14.04 prend 71secondes alors que le 16.04 prend 207 secondes (il manque les premières millisecondes de 14.04 mais on s'en fiche)
Pour 16.04, il y a un saut à la seconde 79.
Un spécialiste pourra peut-être comprendre et nous expliquer cet écart
P.S., le meilleur outil pour tester mon HDD STP ?
14.04
[ 0.132653] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.132658] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.132739] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132990] pnp 00:02: [dma 2]
[ 0.133039] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.133324] pnp 00:03: [dma 3]
[ 0.133435] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.133501] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.133504] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133625] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.133628] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.133630] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.133633] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.133635] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.133639] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133742] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.133746] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133821] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.133824] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.133827] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134048] pnp 00:08: [dma 0 disabled]
[ 0.134112] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134180] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134183] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134352] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134354] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.134357] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.134359] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.134362] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134478] pnp: PnP ACPI: found 11 devices
[ 0.134484] PnPBIOS: Disabled by ACPI PNP
[ 0.171419] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.171443] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.171447] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.171450] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.171453] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.171456] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.171460] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.171462] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.171467] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.171474] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.171476] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.171478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.171480] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.171482] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.171484] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.171486] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.171488] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.171491] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.171492] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.171494] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.171496] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.171498] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.171500] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.171502] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.171534] NET: Registered protocol family 2
[ 0.171740] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.171759] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.171789] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.171819] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171829] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171877] NET: Registered protocol family 1
[ 0.172427] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.172433] PCI: CLS 32 bytes, default 64
[ 0.172486] Trying to unpack rootfs image as initramfs...
[ 0.701311] Freeing initrd memory: 29520K (f4648000 - f631c000)
[ 0.701565] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x606
[ 0.701570] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x606
[ 0.701664] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.701768] Scanning for low memory corruption every 60 seconds
[ 0.702163] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.702206] Initialise system trusted keyring
[ 0.702233] audit: initializing netlink subsys (disabled)
[ 0.702260] audit: type=2000 audit(1467145757.700:1): initialized
[ 0.702608] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.704769] zpool: loaded
[ 0.704772] zbud: loaded
[ 0.704849] VFS: Disk quotas dquot_6.6.0
[ 0.704895] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.705463] fuse init (API version 7.23)
[ 0.705639] Key type big_key registered
[ 0.705908] Key type asymmetric registered
[ 0.705911] Asymmetric key parser 'x509' registered
[ 0.705930] bounce: pool size: 64 pages
[ 0.705973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.706002] io scheduler noop registered
[ 0.706005] io scheduler deadline registered (default)
[ 0.706046] io scheduler cfq registered
[ 0.706352] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.706355] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.706357] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.706360] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.706367] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.706375] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.706417] intel_idle: does not run on family 6 model 23
[ 0.706504] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.706509] ACPI: Power Button [PWRB]
[ 0.706560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.706563] ACPI: Power Button [PWRF]
[ 0.706733] GHES: HEST is not enabled!
[ 0.706762] isapnp: Scanning for PnP cards...
[ 0.712033] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.732429] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.734172] Linux agpgart interface v0.103
[ 0.736840] brd: module loaded
[ 0.737949] loop: module loaded
[ 0.738113] ata_piix 0000:00:1f.1: version 2.13
[ 0.739196] scsi host0: ata_piix
[ 0.739287] scsi host1: ata_piix
[ 0.739338] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.739339] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.739400] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.740558] scsi host2: ata_piix
[ 0.740640] scsi host3: ata_piix
[ 0.740690] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.740692] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.740789] libphy: Fixed MDIO Bus: probed
[ 0.740792] tun: Universal TUN/TAP device driver, 1.6
[ 0.740793] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.740840] PPP generic driver version 2.4.2
[ 0.740919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.740925] ehci-pci: EHCI PCI platform driver
[ 0.741006] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.741013] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.741024] ehci-pci 0000:00:1d.7: debug port 1
[ 0.744913] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.744928] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.756012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.756083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.756085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756087] usb usb1: Product: EHCI Host Controller
[ 0.756089] usb usb1: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
[ 0.756091] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.756215] hub 1-0:1.0: USB hub found
[ 0.756224] hub 1-0:1.0: 8 ports detected
[ 0.756443] ehci-platform: EHCI generic platform driver
[ 0.756458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.756462] ohci-pci: OHCI PCI platform driver
[ 0.756475] ohci-platform: OHCI generic platform driver
[ 0.756486] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.756549] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.756554] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.756561] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.756578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.756626] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.756628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756630] usb usb2: Product: UHCI Host Controller
[ 0.756632] usb usb2: Manufacturer: Linux 4.2.0-36-generic uhci_hcd
[ 0.756634] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.756745] hub 2-0:1.0: USB hub found
[ 0.756753] hub 2-0:1.0: 2 ports detected
[ 0.756904] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.756912] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.756917] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.756933] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.756979] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.756981] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756983] usb usb3: Product: UHCI Host Controller
[ 0.756984] usb usb3: Manufacturer: Linux 4.2.0-36-generic uhci_hcd
[ 0.756986] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.757097] hub 3-0:1.0: USB hub found
[ 0.757105] hub 3-0:1.0: 2 ports detected
[ 0.757257] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.757264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.757269] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.757290] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.757336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.757338] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757340] usb usb4: Product: UHCI Host Controller
[ 0.757342] usb usb4: Manufacturer: Linux 4.2.0-36-generic uhci_hcd
[ 0.757344] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.757457] hub 4-0:1.0: USB hub found
[ 0.757464] hub 4-0:1.0: 2 ports detected
[ 0.757615] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.757621] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.757626] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.757648] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.757694] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.757696] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757698] usb usb5: Product: UHCI Host Controller
[ 0.757700] usb usb5: Manufacturer: Linux 4.2.0-36-generic uhci_hcd
[ 0.757701] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.757814] hub 5-0:1.0: USB hub found
[ 0.757821] hub 5-0:1.0: 2 ports detected
[ 0.757978] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.760807] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.760811] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.760954] mousedev: PS/2 mouse device common for all mice
[ 0.761097] rtc_cmos 00:01: RTC can wake from S4
[ 0.761211] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.761231] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.761243] i2c /dev entries driver
[ 0.761304] device-mapper: uevent: version 1.0.3
[ 0.761377] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 0.761403] platform eisa.0: Probing EISA bus 0
[ 0.761406] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.761408] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.761410] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.761412] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.761413] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.761415] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.761417] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.761419] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.761421] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.761422] platform eisa.0: EISA: Detected 0 cards
[ 0.761436] cpufreq-nforce2: No nForce2 chipset.
[ 0.761444] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.761454] PCCT header not found.
[ 0.761714] NET: Registered protocol family 10
[ 0.761965] NET: Registered protocol family 17
[ 0.761977] Key type dns_resolver registered
[ 0.762166] Using IPI No-Shortcut mode
[ 0.762301] Loading compiled-in X.509 certificates
[ 0.765532] Loaded X.509 cert 'Build time autogenerated kernel key: 9ba38a10a269d891297493c09289b49df620b829'
[ 0.765549] registered taskstats version 1
[ 0.765568] zswap: loading zswap
[ 0.765570] zswap: using zbud pool
[ 0.765574] zswap: using lzo compressor
[ 0.767507] Key type trusted registered
[ 0.770622] Key type encrypted registered
[ 0.770628] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.770632] ima: No TPM chip found, activating TPM-bypass!
[ 0.770658] evm: HMAC attrs: 0x1
[ 0.770864] Magic number: 4:154:499
[ 0.770958] rtc_cmos 00:01: setting system clock to 2016-06-28 20:29:18 UTC (1467145758)
[ 0.771254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.771256] EDD information not available.
[ 0.771318] PM: Hibernation image not present or could not be loaded.
[ 0.911248] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 0.911251] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.932201] ata3.00: configured for UDMA/133
[ 0.943660] ata4.00: ATA-8: MAXTOR STM3320613AS, MX15, max UDMA/133
[ 0.943662] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.943666] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
[ 0.999543] ata4.00: configured for UDMA/133
[ 1.012115] ata4.01: configured for UDMA/100
[ 1.059541] isapnp: No Plug & Play device found
[ 1.059654] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-19 PQ: 0 ANSI: 5
[ 1.059828] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.059862] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.059875] sd 2:0:0:0: [sda] Write Protect is off
[ 1.059878] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.059899] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.059955] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MX15 PQ: 0 ANSI: 5
[ 1.060172] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.060174] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.060220] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.060223] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.060561] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.060854] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
[ 1.068024] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.106894] sdb: sdb1
[ 1.108476] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.108480] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.108577] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.108612] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 1.108665] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 1.114922] sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3
[ 1.115391] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.115710] Freeing unused kernel memory: 976K (c1ad1000 - c1bc5000)
[ 1.115761] Write protecting the kernel text: 7272k
[ 1.115790] Write protecting the kernel read-only data: 3044k
[ 1.115791] NX-protecting the kernel data: 5016k
[ 1.127718] systemd-udevd[114]: starting version 204
[ 1.161223] [drm] Initialized drm 1.1.0 20060810
[ 1.167220] Floppy drive(s): fd0 is 1.44M
[ 1.177568] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.177680] r8169 0000:02:05.0 (unnamed net_device) (uninitialized): not PCI Express
[ 1.177992] r8169 0000:02:05.0 eth0: RTL8169sc/8110sc at 0xf840ec00, 00:22:15:cb:d5:2a, XID 18000000 IRQ 18
[ 1.177995] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.224262] FDC 0 is a post-1991 82077
[ 1.236022] [drm] radeon kernel modesetting enabled.
[ 1.236778] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[ 1.236793] [drm] register mmio base: 0xFEAE0000
[ 1.236794] [drm] register mmio size: 65536
[ 1.236897] ATOM BIOS: WEKIVA
[ 1.236929] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.236932] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 1.236934] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.236935] [drm] RAM width 256bits DDR
[ 1.237000] [TTM] Zone kernel: Available graphics memory: 439622 kiB
[ 1.237002] [TTM] Zone highmem: Available graphics memory: 1031274 kiB
[ 1.237003] [TTM] Initializing pool allocator
[ 1.237009] [TTM] Initializing DMA pool allocator
[ 1.237030] [drm] radeon: 512M of VRAM memory ready
[ 1.237031] [drm] radeon: 1024M of GTT memory ready.
[ 1.237042] [drm] Loading RV770 Microcode
[ 1.237121] [drm] Internal thermal controller with fan control
[ 1.237165] [drm] radeon: power management initialized
[ 1.237273] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.256707] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[ 1.256775] radeon 0000:01:00.0: WB enabled
[ 1.256779] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc18c00
[ 1.256781] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc18c0c
[ 1.257888] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xf8a16230
[ 1.257896] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.257897] [drm] Driver supports precise vblank timestamp query.
[ 1.257899] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.257933] radeon 0000:01:00.0: radeon: using MSI.
[ 1.257960] [drm] radeon: irq initialized.
[ 1.303959] [drm] ring test on 0 succeeded in 0 usecs
[ 1.303966] [drm] ring test on 3 succeeded in 2 usecs
[ 1.304237] usb 1-1: New USB device found, idVendor=04f9, idProduct=0262
[ 1.304239] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.304241] usb 1-1: Product: MFC-J6510DW
[ 1.304243] usb 1-1: Manufacturer: Brother
[ 1.304245] usb 1-1: SerialNumber: BROM0F403383
[ 1.478632] [drm] ring test on 5 succeeded in 1 usecs
[ 1.478636] [drm] UVD initialized successfully.
[ 1.478782] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.478796] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.495715] usb-storage 1-1:1.3: USB Mass Storage device detected
[ 1.495820] scsi host4: usb-storage 1-1:1.3
[ 1.495905] usbcore: registered new interface driver usb-storage
[ 1.499884] usbcore: registered new interface driver uas
[ 1.700028] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[ 1.700034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[ 1.748021] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.923056] usb 5-1: New USB device found, idVendor=0e8f, idProduct=00a5
[ 1.923061] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.923064] usb 5-1: Product: 2.4G RX
[ 1.923067] usb 5-1: Manufacturer: DaKai
[ 1.933522] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.978919] usbcore: registered new interface driver usbhid
[ 1.978922] usbhid: USB HID core driver
[ 1.983076] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0E8F:00A5.0001/input/input5
[ 2.036145] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input0
[ 2.037059] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0E8F:00A5.0002/input/input6
[ 2.092399] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input1
[ 2.124038] [drm] ib test on ring 5 succeeded
[ 2.124669] [drm] Radeon Display Connectors
[ 2.124671] [drm] Connector 0:
[ 2.124672] [drm] DVI-I-1
[ 2.124673] [drm] HPD2
[ 2.124675] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.124676] [drm] Encoders:
[ 2.124677] [drm] DFP1: INTERNAL_UNIPHY
[ 2.124679] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.124680] [drm] Connector 1:
[ 2.124681] [drm] DIN-1
[ 2.124682] [drm] Encoders:
[ 2.124683] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.124684] [drm] Connector 2:
[ 2.124685] [drm] DVI-I-2
[ 2.124686] [drm] HPD1
[ 2.124687] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.124688] [drm] Encoders:
[ 2.124689] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.124691] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 2.223201] [drm] fb mappable at 0xE0459000
[ 2.223203] [drm] vram apper at 0xE0000000
[ 2.223204] [drm] size 8294400
[ 2.223205] [drm] fb depth is 24
[ 2.223206] [drm] pitch is 7680
[ 2.223272] fbcon: radeondrmfb (fb0) is primary device
[ 2.286491] Console: switching to colour frame buffer device 210x65
[ 2.292925] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.292927] radeon 0000:01:00.0: registered panic notifier
[ 2.304029] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 2.510071] scsi 4:0:0:0: Direct-Access Brother MFC-J6510DW 1.00 PQ: 0 ANSI: 2
[ 2.510889] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.558664] random: nonblocking pool is initialized
[ 2.559013] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[ 2.559016] EXT4-fs (sda7): write access will be enabled during recovery
[ 2.580060] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.700078] clocksource: Switched to clocksource tsc
[ 4.143646] EXT4-fs (sda7): recovery complete
[ 4.151736] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 34.687123] Adding 2048252k swap on /dev/sda6. Priority:-1 extents:1 across:2048252k FS
[ 34.894642] systemd-udevd[318]: starting version 204
[ 35.109469] lp: driver loaded but no devices found
[ 35.136123] ppdev: user-space parallel port driver
[ 35.143819] parport_pc 00:03: reported by Plug and Play ACPI
[ 35.143927] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 35.144772] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.237344] intel_rng: FWH not detected
[ 35.242994] lp0: using parport0 (interrupt-driven).
[ 35.310120] leds_ss4200: no LED devices found
[ 35.427404] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 35.451171] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 35.451837] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 35.461843] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 35.461847] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 35.461850] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 35.461851] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 35.461853] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 35.461855] snd_hda_codec_via hdaudioC0D0: inputs:
[ 35.461858] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 35.461860] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 35.461862] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 35.461864] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 35.474055] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 35.474837] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 35.474969] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 35.475097] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 35.475209] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 35.475454] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 35.475578] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 35.475706] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 35.520476] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 35.532095] WARNING! power/level is deprecated; use power/control instead
[ 35.552177] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 35.566488] audit: type=1400 audit(1467138593.291:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
[ 35.566495] audit: type=1400 audit(1467138593.291:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
[ 35.566499] audit: type=1400 audit(1467138593.291:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
[ 35.566510] audit: type=1400 audit(1467138593.291:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=430 comm="apparmor_parser"
[ 35.566516] audit: type=1400 audit(1467138593.291:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
[ 35.566521] audit: type=1400 audit(1467138593.291:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
[ 35.566943] audit: type=1400 audit(1467138593.291:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
[ 35.566948] audit: type=1400 audit(1467138593.291:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
[ 35.566965] audit: type=1400 audit(1467138593.291:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
[ 35.566969] audit: type=1400 audit(1467138593.291:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
[ 35.852042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 36.152048] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 36.452036] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 36.715100] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 36.752047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 37.052039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 37.352045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 37.652045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 37.952042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 38.888462] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 39.113208] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 39.113241] usbcore: registered new interface driver usblp
[ 39.126149] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 39.836226] FS-Cache: Loaded
[ 39.861314] RPC: Registered named UNIX socket transport module.
[ 39.861318] RPC: Registered udp transport module.
[ 39.861319] RPC: Registered tcp transport module.
[ 39.861321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 39.891131] FS-Cache: Netfs 'nfs' registered for caching
[ 39.924192] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 40.000122] init: failsafe main process (763) killed by TERM signal
[ 40.590166] init: idmapd-mounting (/mnt/nas1) main process (636) killed by TERM signal
[ 40.591549] init: idmapd-mounting (/mnt/nas2) main process (653) killed by TERM signal
[ 40.725872] audit_printk_skb: 6 callbacks suppressed
[ 40.725876] audit: type=1400 audit(1467138598.451:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=856 comm="apparmor_parser"
[ 40.725882] audit: type=1400 audit(1467138598.451:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=856 comm="apparmor_parser"
[ 40.726321] audit: type=1400 audit(1467138598.451:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=856 comm="apparmor_parser"
[ 40.911798] Bluetooth: Core ver 2.20
[ 40.911820] NET: Registered protocol family 31
[ 40.911822] Bluetooth: HCI device and connection manager initialized
[ 40.911827] Bluetooth: HCI socket layer initialized
[ 40.911830] Bluetooth: L2CAP socket layer initialized
[ 40.911837] Bluetooth: SCO socket layer initialized
[ 40.919466] Bluetooth: RFCOMM TTY layer initialized
[ 40.919474] Bluetooth: RFCOMM socket layer initialized
[ 40.919480] Bluetooth: RFCOMM ver 1.11
[ 41.192650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.192655] Bluetooth: BNEP filters: protocol multicast
[ 41.192661] Bluetooth: BNEP socket layer initialized
[ 41.419796] audit: type=1400 audit(1467138599.143:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=962 comm="apparmor_parser"
[ 41.419808] audit: type=1400 audit(1467138599.143:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=962 comm="apparmor_parser"
[ 41.419813] audit: type=1400 audit(1467138599.143:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=962 comm="apparmor_parser"
[ 41.427472] audit: type=1400 audit(1467138599.151:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=961 comm="apparmor_parser"
[ 41.427481] audit: type=1400 audit(1467138599.151:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=961 comm="apparmor_parser"
[ 41.427750] audit: type=1400 audit(1467138599.151:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=961 comm="apparmor_parser"
[ 41.435941] audit: type=1400 audit(1467138599.159:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=962 comm="apparmor_parser"
[ 41.449583] init: cups main process (857) killed by HUP signal
[ 41.449596] init: cups main process ended, respawning
[ 44.392901] r8169 0000:02:05.0 eth0: link down
[ 44.392912] r8169 0000:02:05.0 eth0: link down
[ 44.392928] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.448443] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 44.451499] vboxdrv: Found 2 processor cores.
[ 44.452309] vboxdrv: fAsync=0 offMin=0x2f8 offMax=0xadc
[ 44.452412] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 44.452414] vboxdrv: Successfully loaded version 4.3.36_Ubuntu (interface 0x001a000b).
[ 44.474293] vboxpci: IOMMU not found (not registered)
[ 45.313666] init: samba-ad-dc main process (1202) terminated with status 1
[ 46.179853] r8169 0000:02:05.0 eth0: link up
[ 46.179869] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.881902] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 48.180047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 48.296124] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 48.296226] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 48.327030] init: plymouth-upstart-bridge main process ended, respawning
[ 48.480042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 48.780041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 49.080046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 49.380046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 49.680037] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 49.980045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 50.280047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 57.259901] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 57.556083] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 57.856040] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 58.156039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 58.456035] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 58.756039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 59.056046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 59.356084] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 59.656155] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 70.844192] audit_printk_skb: 150 callbacks suppressed
[ 70.844196] audit: type=1400 audit(1467138628.571:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2195 comm="apparmor_parser"
[ 70.844205] audit: type=1400 audit(1467138628.571:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[ 70.844659] audit: type=1400 audit(1467138628.571:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
crestey1@PC4:~$ 16.04
crestey@PC4:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-24-generic (buildd@lcy01-30) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:25:16 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL/1600, BIOS 0512 03/16/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33cd6000-0x35e62fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB6D0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007FF90000 000034 (v01 031609 RSDT1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FF90200 000084 (v02 031609 FACP1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FF905C0 0066E7 (v01 A1016 A1016000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000007FF90390 00006C (v01 031609 APIC1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FF90400 00003C (v01 031609 OEMMCFG 20090316 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FF9E040 000061 (v01 031609 OEMB1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000007ff8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff]
[ 0.000000] On node 0 totalpages: 524078
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 295826 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f678b000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521848
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=7effdd07-c5f6-44ef-9480-e70fe0fccc58 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ff90)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2026548K/2096312K available (7854K kernel code, 760K rwdata, 3116K rodata, 944K init, 800K bss, 69764K reserved, 0K cma-reserved, 1183304K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b78000 - 0xc1c64000 ( 944 kB)
.data : 0xc17abbd3 - 0xc1b76280 (3881 kB)
.text : 0xc1000000 - 0xc17abbd3 (7854 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f6038000 soft=f603a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_ext
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.793 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.58 BogoMIPS (lpj=10667172)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004025] ACPI: Core revision 20150930
[ 0.011555] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.011574] Security Framework initialized
[ 0.011577] Yama: becoming mindful.
[ 0.011600] AppArmor: AppArmor initialized
[ 0.011637] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011639] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011868] Initializing cgroup subsys io
[ 0.011873] Initializing cgroup subsys memory
[ 0.011881] Initializing cgroup subsys devices
[ 0.011884] Initializing cgroup subsys freezer
[ 0.011887] Initializing cgroup subsys net_cls
[ 0.011890] Initializing cgroup subsys perf_event
[ 0.011893] Initializing cgroup subsys net_prio
[ 0.011895] Initializing cgroup subsys hugetlb
[ 0.011900] Initializing cgroup subsys pids
[ 0.011921] CPU: Physical Processor ID: 0
[ 0.011922] CPU: Processor Core ID: 0
[ 0.011928] mce: CPU supports 6 MCE banks
[ 0.011936] CPU0: Thermal monitoring enabled (TM2)
[ 0.011940] process: using mwait in idle threads
[ 0.011947] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.011949] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.012598] Freeing SMP alternatives memory: 28K (c1c64000 - c1c6b000)
[ 0.016005] ftrace: allocating 31196 entries in 61 pages
[ 0.024099] smpboot: Max logical packages: 2
[ 0.024104] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.024108] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068000] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms
[ 0.068000] APIC delta adjusted to PM-Timer: 1666662 (2000112)
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] CPU 1 irqstacks, hard=f63c4000 soft=f63c6000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] microcode: CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.008000] Initializing CPU#1
[ 0.072042] x86: Booted up 1 node, 2 CPUs
[ 0.072048] smpboot: Total of 2 processors activated (10667.17 BogoMIPS)
[ 0.073761] devtmpfs: initialized
[ 0.073761] evm: security.selinux
[ 0.073761] evm: security.SMACK64
[ 0.073761] evm: security.SMACK64EXEC
[ 0.073761] evm: security.SMACK64TRANSMUTE
[ 0.073761] evm: security.SMACK64MMAP
[ 0.073761] evm: security.ima
[ 0.073761] evm: security.capability
[ 0.073761] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.073761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.073761] pinctrl core: initialized pinctrl subsystem
[ 0.073761] RTC time: 12:54:05, date: 06/28/16
[ 0.073761] NET: Registered protocol family 16
[ 0.073761] EISA bus registered
[ 0.084007] cpuidle: using governor ladder
[ 0.096004] cpuidle: using governor menu
[ 0.096009] PCCT header not found.
[ 0.096136] ACPI: bus type PCI registered
[ 0.096139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.096208] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.096211] PCI: not using MMCONFIG
[ 0.096556] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.096595] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.096597] PCI: Using configuration type 1 for base access
[ 0.096731] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.096732] mtrr: probably your BIOS does not setup all CPUs.
[ 0.096733] mtrr: corrected configuration.
[ 0.108093] ACPI: Added _OSI(Module Device)
[ 0.108095] ACPI: Added _OSI(Processor Device)
[ 0.108096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109778] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.112055] ACPI: Dynamic OEM Table Load:
[ 0.112060] ACPI: SSDT 0x00000000F633A000 000214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.112446] ACPI: Dynamic OEM Table Load:
[ 0.112450] ACPI: SSDT 0x00000000F3428800 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.112875] ACPI: Interpreter enabled
[ 0.112890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.112894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.112906] ACPI: (supports S0 S3 S4 S5)
[ 0.112908] ACPI: Using IOAPIC for interrupt routing
[ 0.112936] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.113873] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.113875] PCI: Using MMCONFIG for extended config space
[ 0.113882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.119618] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119623] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.119854] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119858] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.120061] PCI host bridge to bus 0000:00
[ 0.120064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.120066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.120068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.120070] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.120072] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
[ 0.120075] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.120084] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.120186] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.120224] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120265] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.120337] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.120362] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.120416] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120496] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.120533] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
[ 0.120604] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.120650] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.120688] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.120756] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.120804] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.120841] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
[ 0.120909] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.120957] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.120994] pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.121062] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.121116] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.121139] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.121203] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121244] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.121290] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.121367] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.121417] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.121497] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.121504] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.121509] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.121512] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.121604] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.121617] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.121626] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.121634] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
[ 0.121642] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
[ 0.121650] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.121668] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.121669] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.121671] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.121673] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.121750] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.121766] pci 0000:00:1f.2: reg 0x10: [io 0xc400-0xc407]
[ 0.121773] pci 0000:00:1f.2: reg 0x14: [io 0xc080-0xc083]
[ 0.121780] pci 0000:00:1f.2: reg 0x18: [io 0xc000-0xc007]
[ 0.121787] pci 0000:00:1f.2: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.121794] pci 0000:00:1f.2: reg 0x20: [io 0xb880-0xb88f]
[ 0.121822] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121903] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.121952] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.122085] pci 0000:01:00.0: [1002:9440] type 00 class 0x030000
[ 0.122107] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122117] pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff 64bit]
[ 0.122124] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.122136] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.122160] pci 0000:01:00.0: supports D1 D2
[ 0.122210] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[ 0.122232] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.122279] pci 0000:01:00.1: supports D1 D2
[ 0.122338] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122341] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.122344] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.122348] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122397] pci 0000:02:05.0: [10ec:8167] type 00 class 0x020000
[ 0.122418] pci 0000:02:05.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.122427] pci 0000:02:05.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
[ 0.122464] pci 0000:02:05.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.122486] pci 0000:02:05.0: supports D1 D2
[ 0.122488] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.122565] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.122569] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.122572] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.122577] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.122580] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.122582] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.122584] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.122586] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff window] (subtractive decode)
[ 0.122594] pci_bus 0000:00: on NUMA node 0
[ 0.123380] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123437] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123493] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.123548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.123603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123772] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.123828] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.123923] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.123923] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123923] vgaarb: loaded
[ 0.123923] vgaarb: bridge control possible 0000:01:00.0
[ 0.124263] SCSI subsystem initialized
[ 0.124300] libata version 3.00 loaded.
[ 0.124328] ACPI: bus type USB registered
[ 0.124350] usbcore: registered new interface driver usbfs
[ 0.124362] usbcore: registered new interface driver hub
[ 0.124376] usbcore: registered new device driver usb
[ 0.124497] PCI: Using ACPI for IRQ routing
[ 0.124497] PCI: pci_cache_line_size set to 64 bytes
[ 0.124497] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.124497] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.124497] NetLabel: Initializing
[ 0.124497] NetLabel: domain hash size = 128
[ 0.124497] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.124497] NetLabel: unlabeled traffic allowed by default
[ 0.124497] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.124497] hpet clockevent registered
[ 0.124497] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124497] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126201] clocksource: Switched to clocksource hpet
[ 0.133139] AppArmor: AppArmor Filesystem Enabled
[ 0.133240] pnp: PnP ACPI init
[ 0.133350] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.133355] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.133437] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133691] pnp 00:02: [dma 2]
[ 0.133741] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.134035] pnp 00:03: [dma 3]
[ 0.134155] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.134220] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.134224] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134342] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.134345] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.134348] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.134350] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134353] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.134356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134468] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.134472] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134549] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134552] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134555] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134792] pnp 00:08: [dma 0 disabled]
[ 0.134861] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134927] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135103] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135106] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.135109] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.135111] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.135114] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135240] pnp: PnP ACPI: found 11 devices
[ 0.135245] PnPBIOS: Disabled by ACPI PNP
[ 0.172105] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.172129] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.172134] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.172137] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.172141] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.172144] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172148] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.172151] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.172155] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.172163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.172167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172169] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172171] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172173] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.172175] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.172177] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172180] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.172182] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.172184] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172186] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.172188] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172190] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172192] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172223] NET: Registered protocol family 2
[ 0.172432] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.172452] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.172483] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.172520] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172576] NET: Registered protocol family 1
[ 0.173137] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.173143] PCI: CLS 32 bytes, default 64
[ 0.173197] Trying to unpack rootfs image as initramfs...
[ 0.754781] Freeing initrd memory: 34356K (f3cd6000 - f5e63000)
[ 0.755055] Scanning for low memory corruption every 60 seconds
[ 0.755537] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.755597] audit: initializing netlink subsys (disabled)
[ 0.755624] audit: type=2000 audit(1467118444.752:1): initialized
[ 0.755966] Initialise system trusted keyring
[ 0.756138] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.758124] zbud: loaded
[ 0.758234] VFS: Disk quotas dquot_6.6.0
[ 0.758280] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.758839] fuse init (API version 7.23)
[ 0.759019] Key type big_key registered
[ 0.759038] Allocating IMA MOK and blacklist keyrings.
[ 0.759402] Key type asymmetric registered
[ 0.759406] Asymmetric key parser 'x509' registered
[ 0.759422] bounce: pool size: 64 pages
[ 0.759466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.759496] io scheduler noop registered
[ 0.759499] io scheduler deadline registered (default)
[ 0.759536] io scheduler cfq registered
[ 0.759864] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.759867] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.759869] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.759872] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.759880] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759888] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.759923] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.759925] vesafb: scrolling: redraw
[ 0.759927] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.759946] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 5824k, total 5824k
[ 0.760089] Console: switching to colour frame buffer device 175x65
[ 0.760126] fb0: VESA VGA frame buffer device
[ 0.760143] intel_idle: does not run on family 6 model 23
[ 0.760232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.760238] ACPI: Power Button [PWRB]
[ 0.760289] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.760291] ACPI: Power Button [PWRF]
[ 0.760462] GHES: HEST is not enabled!
[ 0.760486] isapnp: Scanning for PnP cards...
[ 0.760565] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780963] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782706] Linux agpgart interface v0.103
[ 0.790846] brd: module loaded
[ 0.792282] loop: module loaded
[ 0.792455] ata_piix 0000:00:1f.1: version 2.13
[ 0.793545] scsi host0: ata_piix
[ 0.793640] scsi host1: ata_piix
[ 0.793690] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.793692] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.793759] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.795025] scsi host2: ata_piix
[ 0.795190] scsi host3: ata_piix
[ 0.795241] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.795243] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.795345] libphy: Fixed MDIO Bus: probed
[ 0.795348] tun: Universal TUN/TAP device driver, 1.6
[ 0.795349] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795398] PPP generic driver version 2.4.2
[ 0.795466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795472] ehci-pci: EHCI PCI platform driver
[ 0.795555] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.795562] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.795573] ehci-pci 0000:00:1d.7: debug port 1
[ 0.799468] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.799478] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.808012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.808086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808090] usb usb1: Product: EHCI Host Controller
[ 0.808092] usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 0.808094] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.808219] hub 1-0:1.0: USB hub found
[ 0.808227] hub 1-0:1.0: 8 ports detected
[ 0.808447] ehci-platform: EHCI generic platform driver
[ 0.808461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.808466] ohci-pci: OHCI PCI platform driver
[ 0.808481] ohci-platform: OHCI generic platform driver
[ 0.808491] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.808557] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.808563] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.808569] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.808586] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.808634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808636] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808638] usb usb2: Product: UHCI Host Controller
[ 0.808640] usb usb2: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.808642] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.808755] hub 2-0:1.0: USB hub found
[ 0.808763] hub 2-0:1.0: 2 ports detected
[ 0.808918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.808924] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.808929] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.808945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.808993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808997] usb usb3: Product: UHCI Host Controller
[ 0.808999] usb usb3: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809000] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.809116] hub 3-0:1.0: USB hub found
[ 0.809125] hub 3-0:1.0: 2 ports detected
[ 0.809278] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.809286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.809291] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.809313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.809360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809364] usb usb4: Product: UHCI Host Controller
[ 0.809366] usb usb4: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809368] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.809480] hub 4-0:1.0: USB hub found
[ 0.809487] hub 4-0:1.0: 2 ports detected
[ 0.809640] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.809645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.809651] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.809673] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.809721] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809723] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809725] usb usb5: Product: UHCI Host Controller
[ 0.809727] usb usb5: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809729] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.809845] hub 5-0:1.0: USB hub found
[ 0.809852] hub 5-0:1.0: 2 ports detected
[ 0.810025] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.812886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.812891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.813036] mousedev: PS/2 mouse device common for all mice
[ 0.813178] rtc_cmos 00:01: RTC can wake from S4
[ 0.813289] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.813309] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.813319] i2c /dev entries driver
[ 0.813381] device-mapper: uevent: version 1.0.3
[ 0.813451] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.813479] platform eisa.0: Probing EISA bus 0
[ 0.813482] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.813484] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.813486] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.813487] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.813489] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.813491] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.813493] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.813495] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.813497] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.813499] platform eisa.0: EISA: Detected 0 cards
[ 0.813514] cpufreq-nforce2: No nForce2 chipset.
[ 0.813524] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.813834] NET: Registered protocol family 10
[ 0.814097] NET: Registered protocol family 17
[ 0.814109] Key type dns_resolver registered
[ 0.814335] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814342] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814377] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.814388] Using IPI No-Shortcut mode
[ 0.814533] registered taskstats version 1
[ 0.814551] Loading compiled-in X.509 certificates
[ 0.817683] Loaded X.509 cert 'Build time autogenerated kernel key: 5e87f4b3aa9fd31ac3c1a96c0339b37184699ecc'
[ 0.817702] zswap: loaded using pool lzo/zbud
[ 0.819702] Key type trusted registered
[ 0.822882] Key type encrypted registered
[ 0.822888] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.822892] ima: No TPM chip found, activating TPM-bypass!
[ 0.822913] evm: HMAC attrs: 0x1
[ 0.823113] Magic number: 4:268:937
[ 0.823140] misc lightnvm: hash matches
[ 0.823164] platform PNP0103:00: hash matches
[ 0.823174] acpi PNP0103:00: hash matches
[ 0.823208] rtc_cmos 00:01: setting system clock to 2016-06-28 12:54:05 UTC (1467118445)
[ 0.823521] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.823523] EDD information not available.
[ 0.823580] PM: Hibernation image not present or could not be loaded.
[ 0.964458] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 0.964461] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.972341] ata3.00: configured for UDMA/133
[ 0.999545] ata4.00: ATA-8: MAXTOR STM3320613AS, MX15, max UDMA/133
[ 0.999547] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.999552] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
[ 1.055515] ata4.00: configured for UDMA/133
[ 1.068112] ata4.01: configured for UDMA/100
[ 1.069940] isapnp: No Plug & Play device found
[ 1.070065] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-19 PQ: 0 ANSI: 5
[ 1.070236] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.070280] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.070282] sd 2:0:0:0: [sda] Write Protect is off
[ 1.070284] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.070305] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.070400] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MX15 PQ: 0 ANSI: 5
[ 1.070591] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.070593] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.070647] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.070649] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.070669] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.071252] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
[ 1.096265] sdb: sdb1
[ 1.105898] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.105902] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.105988] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.106042] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 1.106100] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 1.120018] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.153351] sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3
[ 1.153848] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.154162] Freeing unused kernel memory: 944K (c1b78000 - c1c64000)
[ 1.154226] Write protecting the kernel text: 7856k
[ 1.154258] Write protecting the kernel read-only data: 3120k
[ 1.154259] NX-protecting the kernel data: 6480k
[ 1.164068] random: systemd-udevd urandom read with 20 bits of entropy available
[ 1.218484] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.225466] [drm] Initialized drm 1.1.0 20060810
[ 1.245758] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.245871] r8169 0000:02:05.0 (unnamed net_device) (uninitialized): not PCI Express
[ 1.246176] r8169 0000:02:05.0 eth0: RTL8169sc/8110sc at 0xf840ec00, 00:22:15:cb:d5:2a, XID 18000000 IRQ 18
[ 1.246179] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.253055] Floppy drive(s): fd0 is 1.44M
[ 1.253662] usb 1-1: New USB device found, idVendor=04f9, idProduct=0262
[ 1.253665] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.253667] usb 1-1: Product: MFC-J6510DW
[ 1.253669] usb 1-1: Manufacturer: Brother
[ 1.253671] usb 1-1: SerialNumber: BROM0F403383
[ 1.273765] FDC 0 is a post-1991 82077
[ 1.301397] r8169 0000:02:05.0 enp2s5: renamed from eth0
[ 1.324243] [drm] radeon kernel modesetting enabled.
[ 1.324301] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 1.324302] fb: switching to radeondrmfb from VESA VGA
[ 1.324338] Console: switching to colour dummy device 80x25
[ 1.325440] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[ 1.325452] [drm] register mmio base: 0xFEAE0000
[ 1.325453] [drm] register mmio size: 65536
[ 1.325544] ATOM BIOS: WEKIVA
[ 1.325578] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.325581] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 1.325583] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.325584] [drm] RAM width 256bits DDR
[ 1.325715] [TTM] Zone kernel: Available graphics memory: 439286 kiB
[ 1.325717] [TTM] Zone highmem: Available graphics memory: 1030938 kiB
[ 1.325718] [TTM] Initializing pool allocator
[ 1.325724] [TTM] Initializing DMA pool allocator
[ 1.325745] [drm] radeon: 512M of VRAM memory ready
[ 1.325746] [drm] radeon: 1024M of GTT memory ready.
[ 1.325760] [drm] Loading RV770 Microcode
[ 1.325834] [drm] Internal thermal controller with fan control
[ 1.325876] [drm] radeon: power management initialized
[ 1.325964] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.352418] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[ 1.352498] radeon 0000:01:00.0: WB enabled
[ 1.352503] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc1cc00
[ 1.352506] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc1cc0c
[ 1.353731] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xf9016230
[ 1.353750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.353752] [drm] Driver supports precise vblank timestamp query.
[ 1.353754] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.353791] radeon 0000:01:00.0: radeon: using MSI.
[ 1.353819] [drm] radeon: irq initialized.
[ 1.399787] [drm] ring test on 0 succeeded in 1 usecs
[ 1.399794] [drm] ring test on 3 succeeded in 2 usecs
[ 1.468382] usb-storage 1-1:1.3: USB Mass Storage device detected
[ 1.468463] scsi host4: usb-storage 1-1:1.3
[ 1.468758] usbcore: registered new interface driver usb-storage
[ 1.472858] usbcore: registered new interface driver uas
[ 1.574454] [drm] ring test on 5 succeeded in 1 usecs
[ 1.574473] [drm] UVD initialized successfully.
[ 1.574690] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.574708] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.628021] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.752022] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[ 1.752029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[ 1.803077] usb 5-1: New USB device found, idVendor=0e8f, idProduct=00a5
[ 1.803082] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.803086] usb 5-1: Product: 2.4G RX
[ 1.803089] usb 5-1: Manufacturer: DaKai
[ 1.813367] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.858943] usbcore: registered new interface driver usbhid
[ 1.858946] usbhid: USB HID core driver
[ 1.863437] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0E8F:00A5.0001/input/input5
[ 1.916163] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input0
[ 1.917113] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0E8F:00A5.0002/input/input6
[ 1.972232] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input1
[ 2.220043] [drm] ib test on ring 5 succeeded
[ 2.220711] [drm] Radeon Display Connectors
[ 2.220712] [drm] Connector 0:
[ 2.220714] [drm] DVI-I-1
[ 2.220715] [drm] HPD2
[ 2.220717] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.220718] [drm] Encoders:
[ 2.220719] [drm] DFP1: INTERNAL_UNIPHY
[ 2.220720] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.220721] [drm] Connector 1:
[ 2.220722] [drm] DIN-1
[ 2.220723] [drm] Encoders:
[ 2.220725] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.220726] [drm] Connector 2:
[ 2.220727] [drm] DVI-I-2
[ 2.220728] [drm] HPD1
[ 2.220729] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.220730] [drm] Encoders:
[ 2.220731] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.220733] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 2.259122] random: nonblocking pool is initialized
[ 2.319528] [drm] fb mappable at 0xE0459000
[ 2.319530] [drm] vram apper at 0xE0000000
[ 2.319531] [drm] size 8294400
[ 2.319532] [drm] fb depth is 24
[ 2.319533] [drm] pitch is 7680
[ 2.319610] fbcon: radeondrmfb (fb0) is primary device
[ 2.319701] Console: switching to colour frame buffer device 210x65
[ 2.319749] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.328024] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 2.488480] scsi 4:0:0:0: Direct-Access Brother MFC-J6510DW 1.00 PQ: 0 ANSI: 2
[ 2.488808] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.522450] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.568349] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.752076] clocksource: Switched to clocksource tsc
[ 5.013153] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.013275] systemd[1]: Detected architecture x86.
[ 5.033478] systemd[1]: Set hostname to <PC4>.
[ 7.550631] systemd[1]: Listening on Syslog Socket.
[ 7.550827] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.550844] systemd[1]: Reached target Encrypted Volumes.
[ 7.550889] systemd[1]: Listening on Journal Socket.
[ 7.550997] systemd[1]: Created slice User and Session Slice.
[ 7.551012] systemd[1]: Reached target User and Group Name Lookups.
[ 7.551087] systemd[1]: Created slice System Slice.
[ 7.551177] systemd[1]: Created slice system-getty.slice.
[ 7.560163] systemd[1]: Started Read required files in advance.
[ 7.560804] systemd[1]: Mounting NFSD configuration filesystem...
[ 7.561359] systemd[1]: Started Braille Device Support.
[ 7.788168] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.788295] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.788780] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.788828] systemd[1]: Reached target Slices.
[ 7.789309] systemd[1]: Starting Uncomplicated firewall...
[ 7.789814] systemd[1]: Mounting Debug File System...
[ 7.790313] systemd[1]: Mounting RPC Pipe File System...
[ 7.790436] systemd[1]: Listening on Journal Audit Socket.
[ 7.790497] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.790552] systemd[1]: Listening on udev Control Socket.
[ 7.791065] systemd[1]: Mounting Huge Pages File System...
[ 7.791083] systemd[1]: PNFS blkmaping enablement. is not active.
[ 7.791191] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[ 7.791236] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[ 7.791294] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.791866] systemd[1]: Starting Journal Service...
[ 8.376168] systemd[1]: Starting Load Kernel Modules...
[ 8.376300] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.376450] systemd[1]: Listening on udev Kernel Socket.
[ 8.376568] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.378247] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.378527] systemd[1]: Started Uncomplicated firewall.
[ 8.428177] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.819162] systemd[1]: Mounted Debug File System.
[ 8.819262] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.819852] systemd[1]: Mounted Huge Pages File System.
[ 9.458565] lp: driver loaded but no devices found
[ 9.496165] ppdev: user-space parallel port driver
[ 9.498231] systemd[1]: Started Journal Service.
[ 9.616697] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.616786] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 9.701842] RPC: Registered named UNIX socket transport module.
[ 9.701845] RPC: Registered udp transport module.
[ 9.701847] RPC: Registered tcp transport module.
[ 9.701848] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.712170] lp0: using parport0 (interrupt-driven).
[ 10.130308] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.167535] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.550020] systemd-journald[246]: Received request to flush runtime journal from PID 1
[ 17.682588] intel_rng: FWH not detected
[ 17.800333] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.338613] leds_ss4200: no LED devices found
[ 20.219509] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 20.398411] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.398852] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 20.500166] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.760744] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 20.760748] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.760751] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 20.760753] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 20.760754] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 20.760756] snd_hda_codec_via hdaudioC0D0: inputs:
[ 20.760759] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 20.760761] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 20.760763] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 20.760765] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 20.766822] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.766900] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.766973] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 20.767047] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 20.767120] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 20.767193] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 20.767271] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 20.767345] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 20.800040] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 20.867329] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 21.100056] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.368386] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 21.368417] usbcore: registered new interface driver usblp
[ 21.400033] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.700044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.000037] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.300041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.600034] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.900041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.231852] Adding 2048252k swap on /dev/sda6. Priority:-1 extents:1 across:2048252k FS
[ 25.567630] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 27.176189] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 27.476078] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 27.776036] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.076047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.376039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.676039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 28.976034] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.276033] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.576032] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 39.149640] audit: type=1400 audit(1467118483.824:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=665 comm="apparmor_parser"
[ 39.149651] audit: type=1400 audit(1467118483.824:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser"
[ 39.149658] audit: type=1400 audit(1467118483.824:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=665 comm="apparmor_parser"
[ 39.149664] audit: type=1400 audit(1467118483.824:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser"
[ 39.237078] audit: type=1400 audit(1467118483.912:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=664 comm="apparmor_parser"
[ 39.237087] audit: type=1400 audit(1467118483.912:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=664 comm="apparmor_parser"
[ 52.686643] audit: type=1400 audit(1467118497.360:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=668 comm="apparmor_parser"
[ 53.289459] audit: type=1400 audit(1467118497.960:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=666 comm="apparmor_parser"
[ 53.289473] audit: type=1400 audit(1467118497.960:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=666 comm="apparmor_parser"
[ 53.289479] audit: type=1400 audit(1467118497.960:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=666 comm="apparmor_parser"
[ 53.289485] audit: type=1400 audit(1467118497.960:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=666 comm="apparmor_parser"
[ 53.289491] audit: type=1400 audit(1467118497.960:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=666 comm="apparmor_parser"
[ 53.289497] audit: type=1400 audit(1467118497.960:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=666 comm="apparmor_parser"
[ 54.964198] audit: type=1400 audit(1467118499.636:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=670 comm="apparmor_parser"
[ 54.967319] audit: type=1400 audit(1467118499.636:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=672 comm="apparmor_parser"
[ 54.967328] audit: type=1400 audit(1467118499.636:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=672 comm="apparmor_parser"
[ 61.095390] audit_printk_skb: 6 callbacks suppressed
[ 61.095393] audit: type=1400 audit(1467118505.768:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-digikam" pid=674 comm="apparmor_parser"
[ 61.095402] audit: type=1400 audit(1467118505.768:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=674 comm="apparmor_parser"
[ 61.097451] audit: type=1400 audit(1467118505.768:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=677 comm="apparmor_parser"
[ 61.473534] audit: type=1400 audit(1467118506.148:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=669 comm="apparmor_parser"
[ 61.473544] audit: type=1400 audit(1467118506.148:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=669 comm="apparmor_parser"
[ 71.023569] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 71.153276] NFSD: starting 90-second grace period (net c1b489c0)
[ 72.061272] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 72.072860] r8169 0000:02:05.0 enp2s5: link down
[ 72.072861] r8169 0000:02:05.0 enp2s5: link down
[ 72.072898] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 72.606917] usblp1: removed
[ 72.609693] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 73.712271] r8169 0000:02:05.0 enp2s5: link up
[ 73.712288] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
[ 79.097409] FS-Cache: Loaded
[ 79.159870] FS-Cache: Netfs 'nfs' registered for caching
[ 169.574164] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 169.577394] vboxdrv: Found 2 processor cores
[ 169.577687] vboxdrv: fAsync=0 offMin=0x1f4 offMax=0x7bc
[ 169.677816] vboxdrv: TSC mode is Synchronous, tentative frequency 2666321373 Hz
[ 169.677819] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000)
[ 169.683435] VBoxNetFlt: Successfully started.
[ 169.687546] VBoxNetAdp: Successfully started.
[ 169.692452] VBoxPciLinuxInit
[ 169.698102] vboxpci: IOMMU not found (not registered)
[ 204.577486] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 204.876044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.176047] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.476045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 205.776046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.076046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.376046] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.680828] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 206.980240] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
crestey@PC4:~$ Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#15 Le 28/06/2016, à 20:53
- nam1962
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
En plus de smartmontools, fais un memtest !
(et n'oublie pas de repondre au post #7)
[ Modéré ]
Hors ligne
#16 Le 28/06/2016, à 21:23
- naguam
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Tente le ssd 
Tous les mordus (euhh non mes ordis) sont sous linux.
Vive GNU/Linux et Vive les pinguins
Hors ligne
#17 Le 28/06/2016, à 23:22
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Merci à vous, je fais tout ça demain après midi (je ne peux pas avant). A bientôt
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne
#18 Le 28/06/2016, à 23:55
- tuxmarc
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonsoir Crestey
J'ai deux 16.04 d'installées, sur une tour avec 4 go de RAM et un portable avec 2 go de RAM.
Et bien, c'est sur la tour que c'est le plus long !
Pendant le démarrage, j'ai appuyé sur échap pour voir ce qui se tramait.
C'est systemd qui me sort 'a start job ............... et à la fin un compteur pour 1 mn 30.
A part ça, ça va très vite.
Je ne me suis pas encore bien penché sur ce mystère, qui m'arrivait aussi sous Manjaro, mais Grandtoubab a donné une piste!
Merci Grandtoubab
Interroge ta machine comme il l'a préconisé et moi je vais faire de même ..... demain, car maintenant, dodo
Vive Richard Stalmann, Linus Torvalds, et tous les fondus de Linux.
De l'Ordinosaure fait à 90% de récup, à deux portables LDLC, neufs sans système et une carte mère sans boitier, tous libres !!
Parrain Linux sur www.parrain-linux.com et www.parrains.linux.free.fr
Hors ligne
#19 Le 29/06/2016, à 09:30
- grandtoubab
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
tuxmarc a écrit :
C'est systemd qui me sort 'a start job ............... et à la fin un compteur pour 1 mn 30.
il se peut qu"un service ne soit pas déclaré dans systemd et "freeze" à l'arrêt.
Voir les services dans /etc/systemd/system
Exemple à une époque je cherchais a utiliser rygel et j'avais eu ce soucis:
https://forum.ubuntu-fr.org/viewtopic.p … #p19858801
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#20 Le 29/06/2016, à 11:03
- Bougron
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonjour
Je ne comprends pas tout, Crestey a fait un truc comparatif entre la 14.04 et la 16.04 dans le même ordinateur quasiment au même moment (voir échange 14)
il en ressort clairement qu'il y a un problème pendant 1 minute et 30 secondes (Un time out?) dans le créneau suivant
[ 79.159870] FS-Cache: Netfs 'nfs' registered for caching
[ 169.574164] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
Si quelqu'un connaît une commande pour voir ce qui se passe dans ce créneau, c'est parfait.
Si quelqu'un sait les fichiers complémentaires qu'il est possible de consulter, c'est aussi parfait.
je conseille à crestey de fouiller dans la totalité des fichiers et répertoires de /var à la recherche d'un log quelconque que DMSEG a oublié de consulter.
PS: Pour ce message, 'vboxdrv: module verification failed: signature and/or required key missing - tainting kernel" j'ai vu sur internet que cela veut dire que l'application en question n'est pas certifiée par ubuntu pour cette version. Je doute qu'il faille 90 secondes pour faire ce contrôle.
On est donc vraiment dans le contexte décrit pas tuxmarc!
Dernière modification par Bougron (Le 29/06/2016, à 11:11)
Hors ligne
#21 Le 29/06/2016, à 12:08
- grandtoubab
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bougron a écrit :
Bonjour
Je ne comprends pas tout, Crestey a fait un truc comparatif entre la 14.04 et la 16.04 dans le même ordinateur quasiment au même moment (voir échange 14)il en ressort clairement qu'il y a un problème pendant 1 minute et 30 secondes (Un time out?) dans le créneau suivant
[ 79.159870] FS-Cache: Netfs 'nfs' registered for caching
[ 169.574164] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
Si quelqu'un connaît une commande pour voir ce qui se passe dans ce créneau, c'est parfait.
Si quelqu'un sait les fichiers complémentaires qu'il est possible de consulter, c'est aussi parfait.
je conseille à crestey de fouiller dans la totalité des fichiers et répertoires de /var à la recherche d'un log quelconque que DMSEG a oublié de consulter.PS: Pour ce message, 'vboxdrv: module verification failed: signature and/or required key missing - tainting kernel" j'ai vu sur internet que cela veut dire que l'application en question n'est pas certifiée par ubuntu pour cette version. Je doute qu'il faille 90 secondes pour faire ce contrôle.
On est donc vraiment dans le contexte décrit pas tuxmarc!
14.04 n'utilise peut-etre pas systemd alors que 16.04 doit utiliser systemd
pour le verifier il faut utiliser la commande
pstreeet voir le nom du process d'init
Par intuition je dirai que son service ntfs n'est peut-etre pas déclaré dans systemd
ls -alrt /etc/systemd/systemDernière modification par grandtoubab (Le 29/06/2016, à 12:12)
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#22 Le 29/06/2016, à 12:18
- tuxmarc
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonjour !
grandtoubab a écrit :
il se peut qu"un service ne soit pas déclaré dans systemd et "freeze" à l'arrêt.
Voir les services dans /etc/systemd/system
Exemple à une époque je cherchais a utiliser rygel et j'avais eu ce soucis:
https://forum.ubuntu-fr.org/viewtopic.p … #p19858801
Merci du tuyau
Je vais sortir la pipe, la loupe et il va falloir découvrir les arcanes de systemd et appliquer ta médecine
Je ne connaissais pas systemd, que j'ai découvert dans une discussion enflammée sur le forum où ça se crêpait sévèrement le chignon 
C'est arrivé après une MAJ, tout comme sur Manjaro !
Fortiche la manip' que tu as faite pour dompter la bête !!!!
Vive Richard Stalmann, Linus Torvalds, et tous les fondus de Linux.
De l'Ordinosaure fait à 90% de récup, à deux portables LDLC, neufs sans système et une carte mère sans boitier, tous libres !!
Parrain Linux sur www.parrain-linux.com et www.parrains.linux.free.fr
Hors ligne
#23 Le 29/06/2016, à 12:31
- grandtoubab
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
tuxmarc a écrit :
Bonjour !
grandtoubab a écrit :il se peut qu"un service ne soit pas déclaré dans systemd et "freeze" à l'arrêt.
Voir les services dans /etc/systemd/system
Exemple à une époque je cherchais a utiliser rygel et j'avais eu ce soucis:
https://forum.ubuntu-fr.org/viewtopic.p … #p19858801Merci du tuyau
Je vais sortir la pipe, la loupe et il va falloir découvrir les arcanes de systemd et appliquer ta médecine
Je ne connaissais pas systemd, que j'ai découvert dans une discussion enflammée sur le forum où ça se crêpait sévèrement le chignon
C'est arrivé après une MAJ, tout comme sur Manjaro !
Fortiche la manip' que tu as faite pour dompter la bête !!!!
la doc d'Archlinux est bien faite
https://wiki.archlinux.fr/Systemd
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#24 Le 29/06/2016, à 12:36
- tuxmarc
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
OK ! Merciiii
Vive Richard Stalmann, Linus Torvalds, et tous les fondus de Linux.
De l'Ordinosaure fait à 90% de récup, à deux portables LDLC, neufs sans système et une carte mère sans boitier, tous libres !!
Parrain Linux sur www.parrain-linux.com et www.parrains.linux.free.fr
Hors ligne
#25 Le 29/06/2016, à 16:33
- Crestey
Re : [Résolu] Ubuntu 16.04 : Démarrage très lent (en 4mn)
Bonjour,
J'ai du nouveau. je suis passé à 1mn40 (au lieu de 3mn24) avec une modification du fstab.
Mon fstab déclare 2 nas en nfs dont 1 est inutilisé (éteint la plupart du temps).
Apparamment, ça ne lui plait pas du tout. J'ai donc commenté la ligne du nas2 comme ci-dessous et ça va beaucoup mieux
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=7effdd07-c5f6-44ef-9480-e70fe0fccc58 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda8 during installation
UUID=80367064-0e2a-4cc3-98dc-5ad8d5dcf1b2 /home ext4 defaults 0 2
# /mnt/WindowsData1 was on /dev/sda3 during installation
UUID=69F7965947F1774C /mnt/WindowsData1 ntfs defaults,umask=007,gid=46 0 0
# /mnt/WindowsData2 was on /dev/sdb1 during installation
UUID=DED045E1D045C10F /mnt/WindowsData2 ntfs defaults,umask=007,gid=46 0 0
/dev/sda6 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
192.168.0.20:/mnt/HD_a2 /mnt/nas1 nfs user,rw,nfsvers=3,nolock,proto=tcp,mountproto=tcp 0 0
#192.168.0.21:/mnt/HD_a2 /mnt/nas2 nfs user,rw,nfsvers=3,nolock,proto=tcp,mountproto=tcp 0 0C'est encore un peu long, mais c'est devenu acceptable (vue du misérable utilisateur que je suis 
).
Ci-dessous le nouveau dmesg
crestey@PC4:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-24-generic (buildd@lcy01-30) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:25:16 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL/1600, BIOS 0512 03/16/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33cd6000-0x35e62fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB6D0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007FF90000 000034 (v01 031609 RSDT1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FF90200 000084 (v02 031609 FACP1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FF905C0 0066E7 (v01 A1016 A1016000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000007FF90390 00006C (v01 031609 APIC1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007FF90400 00003C (v01 031609 OEMMCFG 20090316 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007FF9E040 000061 (v01 031609 OEMB1559 20090316 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x000000007ff8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff]
[ 0.000000] On node 0 totalpages: 524078
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 295826 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f678b000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521848
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=7effdd07-c5f6-44ef-9480-e70fe0fccc58 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ff90)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2026548K/2096312K available (7854K kernel code, 760K rwdata, 3116K rodata, 944K init, 800K bss, 69764K reserved, 0K cma-reserved, 1183304K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b78000 - 0xc1c64000 ( 944 kB)
.data : 0xc17abbd3 - 0xc1b76280 (3881 kB)
.text : 0xc1000000 - 0xc17abbd3 (7854 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f6038000 soft=f603a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_ext
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.609 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.21 BogoMIPS (lpj=10666436)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004026] ACPI: Core revision 20150930
[ 0.011554] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.011573] Security Framework initialized
[ 0.011576] Yama: becoming mindful.
[ 0.011598] AppArmor: AppArmor initialized
[ 0.011635] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011637] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011868] Initializing cgroup subsys io
[ 0.011874] Initializing cgroup subsys memory
[ 0.011881] Initializing cgroup subsys devices
[ 0.011885] Initializing cgroup subsys freezer
[ 0.011888] Initializing cgroup subsys net_cls
[ 0.011891] Initializing cgroup subsys perf_event
[ 0.011894] Initializing cgroup subsys net_prio
[ 0.011896] Initializing cgroup subsys hugetlb
[ 0.011900] Initializing cgroup subsys pids
[ 0.011921] CPU: Physical Processor ID: 0
[ 0.011923] CPU: Processor Core ID: 0
[ 0.011928] mce: CPU supports 6 MCE banks
[ 0.011937] CPU0: Thermal monitoring enabled (TM2)
[ 0.011940] process: using mwait in idle threads
[ 0.011948] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.011949] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.012598] Freeing SMP alternatives memory: 28K (c1c64000 - c1c6b000)
[ 0.016005] ftrace: allocating 31196 entries in 61 pages
[ 0.024101] smpboot: Max logical packages: 2
[ 0.024106] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.024110] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] CPU 1 irqstacks, hard=f63c4000 soft=f63c6000
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1
[ 0.008000] microcode: CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.008000] Initializing CPU#1
[ 0.072041] x86: Booted up 1 node, 2 CPUs
[ 0.072047] smpboot: Total of 2 processors activated (10666.43 BogoMIPS)
[ 0.073765] devtmpfs: initialized
[ 0.073765] evm: security.selinux
[ 0.073765] evm: security.SMACK64
[ 0.073765] evm: security.SMACK64EXEC
[ 0.073765] evm: security.SMACK64TRANSMUTE
[ 0.073765] evm: security.SMACK64MMAP
[ 0.073765] evm: security.ima
[ 0.073765] evm: security.capability
[ 0.073765] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.073765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.073765] pinctrl core: initialized pinctrl subsystem
[ 0.073765] RTC time: 14:02:53, date: 06/29/16
[ 0.073765] NET: Registered protocol family 16
[ 0.073765] EISA bus registered
[ 0.084007] cpuidle: using governor ladder
[ 0.096004] cpuidle: using governor menu
[ 0.096009] PCCT header not found.
[ 0.096136] ACPI: bus type PCI registered
[ 0.096139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.096208] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.096211] PCI: not using MMCONFIG
[ 0.096556] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.096596] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.096597] PCI: Using configuration type 1 for base access
[ 0.096731] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.096732] mtrr: probably your BIOS does not setup all CPUs.
[ 0.096733] mtrr: corrected configuration.
[ 0.108092] ACPI: Added _OSI(Module Device)
[ 0.108094] ACPI: Added _OSI(Processor Device)
[ 0.108096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109781] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.112062] ACPI: Dynamic OEM Table Load:
[ 0.112067] ACPI: SSDT 0x00000000F633A000 000214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.112453] ACPI: Dynamic OEM Table Load:
[ 0.112457] ACPI: SSDT 0x00000000F3428800 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.112878] ACPI: Interpreter enabled
[ 0.112894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.112897] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.112910] ACPI: (supports S0 S3 S4 S5)
[ 0.112911] ACPI: Using IOAPIC for interrupt routing
[ 0.112939] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.113877] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.113879] PCI: Using MMCONFIG for extended config space
[ 0.113886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.119617] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119623] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.119854] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119858] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.120061] PCI host bridge to bus 0000:00
[ 0.120064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.120066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.120068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.120070] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.120072] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
[ 0.120075] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.120084] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.120186] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.120224] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120264] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.120336] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.120361] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.120416] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120495] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.120533] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
[ 0.120604] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.120650] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.120687] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.120756] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.120805] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.120841] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
[ 0.120910] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.120958] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.120995] pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.121063] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.121116] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.121140] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.121204] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121244] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.121290] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.121367] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.121418] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.121498] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.121505] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.121509] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.121512] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.121604] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.121618] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.121626] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.121634] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
[ 0.121642] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
[ 0.121651] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.121668] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.121670] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.121671] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.121673] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.121750] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.121766] pci 0000:00:1f.2: reg 0x10: [io 0xc400-0xc407]
[ 0.121773] pci 0000:00:1f.2: reg 0x14: [io 0xc080-0xc083]
[ 0.121780] pci 0000:00:1f.2: reg 0x18: [io 0xc000-0xc007]
[ 0.121787] pci 0000:00:1f.2: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.121794] pci 0000:00:1f.2: reg 0x20: [io 0xb880-0xb88f]
[ 0.121822] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121904] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.121952] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.122085] pci 0000:01:00.0: [1002:9440] type 00 class 0x030000
[ 0.122108] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122118] pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff 64bit]
[ 0.122125] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.122137] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.122160] pci 0000:01:00.0: supports D1 D2
[ 0.122211] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[ 0.122233] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.122280] pci 0000:01:00.1: supports D1 D2
[ 0.122339] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122342] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.122345] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.122349] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.122398] pci 0000:02:05.0: [10ec:8167] type 00 class 0x020000
[ 0.122419] pci 0000:02:05.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.122428] pci 0000:02:05.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
[ 0.122465] pci 0000:02:05.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.122487] pci 0000:02:05.0: supports D1 D2
[ 0.122489] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.122566] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.122569] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.122573] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.122578] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.122580] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.122582] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.122584] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.122587] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff window] (subtractive decode)
[ 0.122595] pci_bus 0000:00: on NUMA node 0
[ 0.123381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123439] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.123495] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.123550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.123606] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123662] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123718] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123775] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.123830] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.123925] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.123925] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123925] vgaarb: loaded
[ 0.123925] vgaarb: bridge control possible 0000:01:00.0
[ 0.124266] SCSI subsystem initialized
[ 0.124302] libata version 3.00 loaded.
[ 0.124331] ACPI: bus type USB registered
[ 0.124353] usbcore: registered new interface driver usbfs
[ 0.124364] usbcore: registered new interface driver hub
[ 0.124379] usbcore: registered new device driver usb
[ 0.124528] PCI: Using ACPI for IRQ routing
[ 0.124530] PCI: pci_cache_line_size set to 64 bytes
[ 0.124566] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.124568] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.124701] NetLabel: Initializing
[ 0.124703] NetLabel: domain hash size = 128
[ 0.124704] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.124716] NetLabel: unlabeled traffic allowed by default
[ 0.124743] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.124743] hpet clockevent registered
[ 0.124743] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124743] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126202] clocksource: Switched to clocksource hpet
[ 0.133133] AppArmor: AppArmor Filesystem Enabled
[ 0.133233] pnp: PnP ACPI init
[ 0.133343] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.133349] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.133429] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133683] pnp 00:02: [dma 2]
[ 0.133733] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.134027] pnp 00:03: [dma 3]
[ 0.134148] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.134213] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.134216] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134334] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.134337] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.134340] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.134342] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134345] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.134348] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134460] system 00:06: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.134464] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134541] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134544] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134547] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134784] pnp 00:08: [dma 0 disabled]
[ 0.134853] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.134919] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134923] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135097] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135100] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.135102] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.135104] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.135108] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135233] pnp: PnP ACPI: found 11 devices
[ 0.135239] PnPBIOS: Disabled by ACPI PNP
[ 0.172097] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.172122] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.172126] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.172129] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.172133] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.172136] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172140] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.172143] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.172147] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.172155] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172157] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.172159] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172161] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172163] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172165] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.172167] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.172169] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.172171] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.172173] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.172175] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172177] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.172179] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172181] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.172183] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff window]
[ 0.172215] NET: Registered protocol family 2
[ 0.172425] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.172443] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.172474] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.172508] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172517] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172564] NET: Registered protocol family 1
[ 0.173126] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.173132] PCI: CLS 32 bytes, default 64
[ 0.173185] Trying to unpack rootfs image as initramfs...
[ 0.754782] Freeing initrd memory: 34356K (f3cd6000 - f5e63000)
[ 0.755054] Scanning for low memory corruption every 60 seconds
[ 0.755533] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.755592] audit: initializing netlink subsys (disabled)
[ 0.755618] audit: type=2000 audit(1467208973.752:1): initialized
[ 0.755961] Initialise system trusted keyring
[ 0.756135] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.758123] zbud: loaded
[ 0.758232] VFS: Disk quotas dquot_6.6.0
[ 0.758277] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.758833] fuse init (API version 7.23)
[ 0.759009] Key type big_key registered
[ 0.759029] Allocating IMA MOK and blacklist keyrings.
[ 0.759403] Key type asymmetric registered
[ 0.759407] Asymmetric key parser 'x509' registered
[ 0.759423] bounce: pool size: 64 pages
[ 0.759465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.759494] io scheduler noop registered
[ 0.759497] io scheduler deadline registered (default)
[ 0.759539] io scheduler cfq registered
[ 0.759858] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.759861] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.759863] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.759866] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.759874] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759882] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.759916] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.759917] vesafb: scrolling: redraw
[ 0.759919] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.759937] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 5824k, total 5824k
[ 0.760075] Console: switching to colour frame buffer device 175x65
[ 0.760113] fb0: VESA VGA frame buffer device
[ 0.760130] intel_idle: does not run on family 6 model 23
[ 0.760219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.760224] ACPI: Power Button [PWRB]
[ 0.760276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.760279] ACPI: Power Button [PWRF]
[ 0.760451] GHES: HEST is not enabled!
[ 0.760476] isapnp: Scanning for PnP cards...
[ 0.760552] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780945] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782698] Linux agpgart interface v0.103
[ 0.790826] brd: module loaded
[ 0.792269] loop: module loaded
[ 0.792441] ata_piix 0000:00:1f.1: version 2.13
[ 0.793535] scsi host0: ata_piix
[ 0.793628] scsi host1: ata_piix
[ 0.793680] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.793682] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.793748] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.795016] scsi host2: ata_piix
[ 0.795180] scsi host3: ata_piix
[ 0.795232] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.795234] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.795338] libphy: Fixed MDIO Bus: probed
[ 0.795341] tun: Universal TUN/TAP device driver, 1.6
[ 0.795343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795389] PPP generic driver version 2.4.2
[ 0.795459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795464] ehci-pci: EHCI PCI platform driver
[ 0.795547] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.795554] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.795565] ehci-pci 0000:00:1d.7: debug port 1
[ 0.799479] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.799491] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.808013] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.808085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808090] usb usb1: Product: EHCI Host Controller
[ 0.808091] usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
[ 0.808093] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.808219] hub 1-0:1.0: USB hub found
[ 0.808228] hub 1-0:1.0: 8 ports detected
[ 0.808449] ehci-platform: EHCI generic platform driver
[ 0.808464] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.808469] ohci-pci: OHCI PCI platform driver
[ 0.808482] ohci-platform: OHCI generic platform driver
[ 0.808492] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.808558] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.808563] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.808569] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.808586] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.808636] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808640] usb usb2: Product: UHCI Host Controller
[ 0.808642] usb usb2: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.808644] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.808759] hub 2-0:1.0: USB hub found
[ 0.808767] hub 2-0:1.0: 2 ports detected
[ 0.808925] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.808930] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.808936] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.808952] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.809000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809004] usb usb3: Product: UHCI Host Controller
[ 0.809006] usb usb3: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809008] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.809124] hub 3-0:1.0: USB hub found
[ 0.809131] hub 3-0:1.0: 2 ports detected
[ 0.809285] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.809291] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.809297] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.809320] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.809368] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809370] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809372] usb usb4: Product: UHCI Host Controller
[ 0.809374] usb usb4: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809375] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.809490] hub 4-0:1.0: USB hub found
[ 0.809497] hub 4-0:1.0: 2 ports detected
[ 0.809653] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.809659] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.809664] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.809686] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.809739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.809741] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809743] usb usb5: Product: UHCI Host Controller
[ 0.809745] usb usb5: Manufacturer: Linux 4.4.0-24-generic uhci_hcd
[ 0.809746] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.809857] hub 5-0:1.0: USB hub found
[ 0.809864] hub 5-0:1.0: 2 ports detected
[ 0.810036] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.812846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.812851] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.812995] mousedev: PS/2 mouse device common for all mice
[ 0.813133] rtc_cmos 00:01: RTC can wake from S4
[ 0.813242] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.813263] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.813273] i2c /dev entries driver
[ 0.813335] device-mapper: uevent: version 1.0.3
[ 0.813410] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.813438] platform eisa.0: Probing EISA bus 0
[ 0.813441] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.813443] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.813445] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.813447] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.813449] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.813451] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.813452] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.813454] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.813456] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.813458] platform eisa.0: EISA: Detected 0 cards
[ 0.813473] cpufreq-nforce2: No nForce2 chipset.
[ 0.813482] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.813791] NET: Registered protocol family 10
[ 0.814060] NET: Registered protocol family 17
[ 0.814072] Key type dns_resolver registered
[ 0.814293] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814300] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[ 0.814334] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.814345] Using IPI No-Shortcut mode
[ 0.814490] registered taskstats version 1
[ 0.814508] Loading compiled-in X.509 certificates
[ 0.817673] Loaded X.509 cert 'Build time autogenerated kernel key: 5e87f4b3aa9fd31ac3c1a96c0339b37184699ecc'
[ 0.817691] zswap: loaded using pool lzo/zbud
[ 0.819673] Key type trusted registered
[ 0.822856] Key type encrypted registered
[ 0.822862] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.822866] ima: No TPM chip found, activating TPM-bypass!
[ 0.822886] evm: HMAC attrs: 0x1
[ 0.823086] Magic number: 4:625:31
[ 0.823173] rtc_cmos 00:01: setting system clock to 2016-06-29 14:02:54 UTC (1467208974)
[ 0.823485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.823487] EDD information not available.
[ 0.823545] PM: Hibernation image not present or could not be loaded.
[ 0.964459] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 0.964462] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.972342] ata3.00: configured for UDMA/133
[ 0.999528] ata4.00: ATA-8: MAXTOR STM3320613AS, MX15, max UDMA/133
[ 0.999530] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.999535] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
[ 1.055498] ata4.00: configured for UDMA/133
[ 1.068113] ata4.01: configured for UDMA/100
[ 1.069913] isapnp: No Plug & Play device found
[ 1.070038] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-19 PQ: 0 ANSI: 5
[ 1.070214] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.070255] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.070260] sd 2:0:0:0: [sda] Write Protect is off
[ 1.070263] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.070283] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.070426] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332061 MX15 PQ: 0 ANSI: 5
[ 1.070591] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.070611] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.070649] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.070652] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.070676] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.071328] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
[ 1.092968] sdb: sdb1
[ 1.101924] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.101928] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.101997] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.102056] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 1.102115] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 1.120020] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.138883] sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3
[ 1.139376] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.139693] Freeing unused kernel memory: 944K (c1b78000 - c1c64000)
[ 1.139757] Write protecting the kernel text: 7856k
[ 1.139789] Write protecting the kernel read-only data: 3120k
[ 1.139790] NX-protecting the kernel data: 6480k
[ 1.149841] random: systemd-udevd urandom read with 19 bits of entropy available
[ 1.211452] [drm] Initialized drm 1.1.0 20060810
[ 1.216492] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.218239] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.218349] r8169 0000:02:05.0 (unnamed net_device) (uninitialized): not PCI Express
[ 1.218737] r8169 0000:02:05.0 eth0: RTL8169sc/8110sc at 0xf848ac00, 00:22:15:cb:d5:2a, XID 18000000 IRQ 18
[ 1.218740] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 1.253172] usb 1-1: New USB device found, idVendor=04f9, idProduct=0262
[ 1.253177] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.253179] usb 1-1: Product: MFC-J6510DW
[ 1.253181] usb 1-1: Manufacturer: Brother
[ 1.253183] usb 1-1: SerialNumber: BROM0F403383
[ 1.256553] Floppy drive(s): fd0 is 1.44M
[ 1.287010] r8169 0000:02:05.0 enp2s5: renamed from eth0
[ 1.292892] FDC 0 is a post-1991 82077
[ 1.313423] [drm] radeon kernel modesetting enabled.
[ 1.313489] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 1.313491] fb: switching to radeondrmfb from VESA VGA
[ 1.313529] Console: switching to colour dummy device 80x25
[ 1.314048] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1002:0x0502).
[ 1.314059] [drm] register mmio base: 0xFEAE0000
[ 1.314060] [drm] register mmio size: 65536
[ 1.314149] ATOM BIOS: WEKIVA
[ 1.314182] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.314184] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 1.314186] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.314187] [drm] RAM width 256bits DDR
[ 1.314250] [TTM] Zone kernel: Available graphics memory: 439286 kiB
[ 1.314252] [TTM] Zone highmem: Available graphics memory: 1030938 kiB
[ 1.314253] [TTM] Initializing pool allocator
[ 1.314260] [TTM] Initializing DMA pool allocator
[ 1.314285] [drm] radeon: 512M of VRAM memory ready
[ 1.314286] [drm] radeon: 1024M of GTT memory ready.
[ 1.314300] [drm] Loading RV770 Microcode
[ 1.314372] [drm] Internal thermal controller with fan control
[ 1.314413] [drm] radeon: power management initialized
[ 1.314499] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.349362] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[ 1.349400] radeon 0000:01:00.0: WB enabled
[ 1.349403] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xf5ceec00
[ 1.349406] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xf5ceec0c
[ 1.350321] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xf9016230
[ 1.350323] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.350324] [drm] Driver supports precise vblank timestamp query.
[ 1.350326] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.350363] radeon 0000:01:00.0: radeon: using MSI.
[ 1.350389] [drm] radeon: irq initialized.
[ 1.396365] [drm] ring test on 0 succeeded in 1 usecs
[ 1.396371] [drm] ring test on 3 succeeded in 2 usecs
[ 1.520016] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.571017] [drm] ring test on 5 succeeded in 1 usecs
[ 1.571022] [drm] UVD initialized successfully.
[ 1.571177] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.571192] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.608184] usb-storage 1-1:1.3: USB Mass Storage device detected
[ 1.608260] scsi host4: usb-storage 1-1:1.3
[ 1.608550] usbcore: registered new interface driver usb-storage
[ 1.612623] usbcore: registered new interface driver uas
[ 1.752020] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[ 1.752026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[ 1.835080] usb 5-1: New USB device found, idVendor=0e8f, idProduct=00a5
[ 1.835086] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.835090] usb 5-1: Product: 2.4G RX
[ 1.835093] usb 5-1: Manufacturer: DaKai
[ 1.845352] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.890963] usbcore: registered new interface driver usbhid
[ 1.890967] usbhid: USB HID core driver
[ 1.895182] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0E8F:00A5.0001/input/input5
[ 1.948181] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input0
[ 1.949169] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0E8F:00A5.0002/input/input6
[ 2.004246] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:1d.3-1/input1
[ 2.220045] [drm] ib test on ring 5 succeeded
[ 2.221009] [drm] Radeon Display Connectors
[ 2.221011] [drm] Connector 0:
[ 2.221012] [drm] DVI-I-1
[ 2.221013] [drm] HPD2
[ 2.221015] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.221016] [drm] Encoders:
[ 2.221018] [drm] DFP1: INTERNAL_UNIPHY
[ 2.221019] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.221020] [drm] Connector 1:
[ 2.221021] [drm] DIN-1
[ 2.221022] [drm] Encoders:
[ 2.221023] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.221024] [drm] Connector 2:
[ 2.221025] [drm] DVI-I-2
[ 2.221026] [drm] HPD1
[ 2.221028] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 2.221029] [drm] Encoders:
[ 2.221030] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.221031] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 2.319477] [drm] fb mappable at 0xE0459000
[ 2.319480] [drm] vram apper at 0xE0000000
[ 2.319481] [drm] size 8294400
[ 2.319482] [drm] fb depth is 24
[ 2.319483] [drm] pitch is 7680
[ 2.319570] fbcon: radeondrmfb (fb0) is primary device
[ 2.319672] Console: switching to colour frame buffer device 210x65
[ 2.319721] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.328034] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 2.411595] random: nonblocking pool is initialized
[ 2.622372] scsi 4:0:0:0: Direct-Access Brother MFC-J6510DW 1.00 PQ: 0 ANSI: 2
[ 2.622711] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.692370] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.752079] clocksource: Switched to clocksource tsc
[ 2.801882] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.705188] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 5.705310] systemd[1]: Detected architecture x86.
[ 5.733824] systemd[1]: Set hostname to <PC4>.
[ 8.467110] systemd[1]: Listening on Journal Socket.
[ 8.467210] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.467221] systemd[1]: PNFS blkmaping enablement. is not active.
[ 8.467305] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[ 8.467344] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[ 8.467377] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.467419] systemd[1]: Reached target User and Group Name Lookups.
[ 8.467480] systemd[1]: Listening on Syslog Socket.
[ 8.467556] systemd[1]: Listening on udev Control Socket.
[ 8.467599] systemd[1]: Reached target Encrypted Volumes.
[ 8.467702] systemd[1]: Listening on Journal Audit Socket.
[ 8.467762] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.467900] systemd[1]: Created slice System Slice.
[ 8.488084] systemd[1]: Mounting NFSD configuration filesystem...
[ 8.676150] systemd[1]: Starting Load Kernel Modules...
[ 8.676347] systemd[1]: Created slice system-getty.slice.
[ 8.676868] systemd[1]: Starting Uncomplicated firewall...
[ 8.677400] systemd[1]: Started Braille Device Support.
[ 8.678661] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.679232] systemd[1]: Mounting Debug File System...
[ 8.679763] systemd[1]: Mounting RPC Pipe File System...
[ 8.680502] systemd[1]: Mounting Huge Pages File System...
[ 8.681118] systemd[1]: Started Read required files in advance.
[ 8.681359] systemd[1]: Created slice User and Session Slice.
[ 8.681406] systemd[1]: Reached target Slices.
[ 8.681497] systemd[1]: Listening on udev Kernel Socket.
[ 8.682112] systemd[1]: Starting Journal Service...
[ 8.682334] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.143279] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.152110] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.152224] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.153824] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.204168] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.435784] systemd[1]: Started Uncomplicated firewall.
[ 9.843095] lp: driver loaded but no devices found
[ 9.860461] systemd[1]: Mounted Debug File System.
[ 9.860557] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.860605] systemd[1]: Mounted Huge Pages File System.
[ 9.997037] ppdev: user-space parallel port driver
[ 10.150787] parport_pc 00:03: reported by Plug and Play ACPI
[ 10.150874] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 10.248130] lp0: using parport0 (interrupt-driven).
[ 10.327448] RPC: Registered named UNIX socket transport module.
[ 10.327451] RPC: Registered udp transport module.
[ 10.327452] RPC: Registered tcp transport module.
[ 10.327453] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.328421] systemd[1]: Mounted RPC Pipe File System.
[ 10.349942] systemd[1]: Started Load Kernel Modules.
[ 10.364117] systemd[1]: Mounting FUSE Control File System...
[ 10.364788] systemd[1]: Starting Apply Kernel Variables...
[ 10.368164] systemd[1]: Mounted FUSE Control File System.
[ 10.479784] systemd[1]: Started Journal Service.
[ 11.224314] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.391575] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 17.989739] systemd-journald[241]: Received request to flush runtime journal from PID 1
[ 19.222283] intel_rng: FWH not detected
[ 19.566040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.737105] leds_ss4200: no LED devices found
[ 22.340592] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 22.752881] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.756608] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 22.756611] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 22.756614] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 22.756615] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 22.756617] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 22.756619] snd_hda_codec_via hdaudioC0D0: inputs:
[ 22.756622] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 22.756624] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 22.756626] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 22.756628] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 22.757837] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 22.763125] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 22.763205] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 22.763277] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 22.763350] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 22.763424] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 22.763498] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 22.763571] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 22.763649] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 22.860164] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.938617] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 23.160037] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.460042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.581582] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 23.581613] usbcore: registered new interface driver usblp
[ 23.760039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 24.060042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 24.360041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 24.660050] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 24.960041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 25.260040] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 25.360755] Adding 2048252k swap on /dev/sda6. Priority:-1 extents:1 across:2048252k FS
[ 27.826788] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 28.948188] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.248043] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.548039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 29.848034] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 30.148038] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 30.448039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 30.748048] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 31.048059] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 31.348044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 60.227075] audit: type=1400 audit(1467209033.900:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=660 comm="apparmor_parser"
[ 60.227086] audit: type=1400 audit(1467209033.900:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser"
[ 60.227092] audit: type=1400 audit(1467209033.900:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=660 comm="apparmor_parser"
[ 60.227098] audit: type=1400 audit(1467209033.900:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser"
[ 60.227510] audit: type=1400 audit(1467209033.900:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=659 comm="apparmor_parser"
[ 60.227518] audit: type=1400 audit(1467209033.900:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=659 comm="apparmor_parser"
[ 60.229263] audit: type=1400 audit(1467209033.900:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=663 comm="apparmor_parser"
[ 60.300837] audit: type=1400 audit(1467209033.972:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=661 comm="apparmor_parser"
[ 60.300853] audit: type=1400 audit(1467209033.972:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=661 comm="apparmor_parser"
[ 60.300859] audit: type=1400 audit(1467209033.972:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=661 comm="apparmor_parser"
[ 69.039125] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 69.160420] NFSD: starting 90-second grace period (net c1b489c0)
[ 69.968692] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 69.984810] r8169 0000:02:05.0 enp2s5: link down
[ 69.984849] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 69.985948] r8169 0000:02:05.0 enp2s5: link down
[ 70.690543] usblp1: removed
[ 70.692577] usblp 1-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0262
[ 71.630188] r8169 0000:02:05.0 enp2s5: link up
[ 71.630201] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
[ 77.082755] FS-Cache: Loaded
[ 77.117255] FS-Cache: Netfs 'nfs' registered for caching
[ 77.799021] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 77.802206] vboxdrv: Found 2 processor cores
[ 77.803252] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x367e
[ 77.903408] vboxdrv: TSC mode is Synchronous, tentative frequency 2666665840 Hz
[ 77.903412] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000)
[ 77.908781] VBoxNetFlt: Successfully started.
[ 77.912790] VBoxNetAdp: Successfully started.
[ 77.919442] VBoxPciLinuxInit
[ 77.925407] vboxpci: IOMMU not found (not registered)
[ 119.394644] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 119.692045] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 119.992051] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 120.292030] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 120.592055] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 120.892044] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 121.192042] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 121.492078] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 121.792049] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 404.571480] perf interrupt took too long (2611 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
crestey@PC4:~$ et les commandes de grandtoubab.
crestey@PC4:~$ sudo systemd-analyze
[sudo] Mot de passe de crestey :
Startup finished in 4.375s (kernel) + 1min 26.175s (userspace) = 1min 30.551s
crestey@PC4:~$ sudo systemd-analyze blame > toto
crestey@PC4:~$ cat toto
32.543s apparmor.service
16.784s dev-sda5.device
12.852s nmbd.service
12.454s samba-ad-dc.service
12.014s minidlna.service
11.158s udev-configure-printer@-devices-pci0000:00-0000:00:1d.7-usb1-1\x2d1.service
8.354s NetworkManager-wait-online.service
7.453s plymouth-read-write.service
7.131s NetworkManager.service
5.615s ModemManager.service
5.197s systemd-udevd.service
4.726s thermald.service
4.668s accounts-daemon.service
3.368s plymouth-start.service
2.737s proc-fs-nfsd.mount
2.734s systemd-tmpfiles-setup-dev.service
2.069s systemd-fsck@dev-disk-by\x2duuid-80367064\x2d0e2a\x2d4cc3\x2d98dc\x2d5ad8d5dcf1b2.service
2.011s rpcbind.service
1.954s udisks2.service
1.912s gpu-manager.service
1.826s colord.service
1.797s systemd-journald.service
1.761s polkitd.service
1.749s grub-common.service
1.673s systemd-modules-load.service
1.648s run-rpc_pipefs.mount
1.553s systemd-tmpfiles-setup.service
1.367s nfs-idmapd.service
1.301s avahi-daemon.service
1.181s sys-kernel-debug.mount
1.180s dev-hugepages.mount
1.115s systemd-sysctl.service
1.106s mnt-WindowsData2.mount
1.085s networking.service
1.067s rsyslog.service
1.047s systemd-logind.service
992ms binfmt-support.service
980ms alsa-restore.service
782ms mnt-WindowsData1.mount
770ms virtualbox.service
759ms systemd-localed.service
758ms ufw.service
746ms systemd-journal-flush.service
708ms dev-mqueue.mount
631ms lightdm.service
606ms dev-sda6.swap
597ms upower.service
593ms systemd-update-utmp.service
586ms plymouth-quit-wait.service
536ms home.mount
522ms smbd.service
518ms systemd-udev-trigger.service
475ms kmod-static-nodes.service
455ms console-setup.service
432ms systemd-random-seed.service
395ms resolvconf.service
383ms irqbalance.service
382ms nfs-config.service
374ms dns-clean.service
362ms nfs-mountd.service
357ms systemd-timesyncd.service
241ms apport.service
228ms systemd-remount-fs.service
193ms systemd-hostnamed.service
149ms user@1000.service
129ms nfs-server.service
113ms proc-sys-fs-binfmt_misc.mount
67ms mnt-nas1.mount
63ms ondemand.service
48ms speech-dispatcher.service
11ms snapd.socket
9ms systemd-user-sessions.service
8ms ureadahead-stop.service
6ms systemd-update-utmp-runlevel.service
5ms rtkit-daemon.service
4ms sys-fs-fuse-connections.mount
3ms rc-local.service
1ms pppd-dns.service
crestey@PC4:~$ Cela vous paraît il sain maintenant ? Dois-je faire d'autres tests pour s'en assurer ?
(je n'ai pas eu le temps de tout bien lire en détail les divers liens que vous suggérez et je dois partir à nouveau et ne pourrai reprendre cette lecture demain, merci déjà infiniment pour tout ça )
Dernière modification par Crestey (Le 29/06/2016, à 16:34)
Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.
Hors ligne