#1 Le 23/04/2016, à 20:59
- ccathy86
Probleme d'affichage du MBR
Bonjour,
J'ai installé sur mon PC Ubuntu 12.04 et Windows XP familial en créant une partition de mon disque dur.
Pour une raison que j'ignore, je n'ai plus l'affichage du mbr au démarrage et donc ne peux plus choisir Windows ou linux.
Par défaut, c'est Linux qui démarre.
J'ai exécuté plusieurs fois Boot-repair mais cela ne change pas le problème.
Voici l'adresse du dernier bootinfo : http://paste.ubuntu.com/16010606
Cela est survenu après que mon fils pendant mon absence ait installé un nouvel écran qui affiche juste avant Linux "D-SUB coupure". mais je ne vois pas trop le rapport avec mon problème.
Pourriez-vous m'aider SVP ?
D'avance, merci.
Cathy
Hors ligne
#2 Le 26/04/2016, à 16:53
- jamesbad000
Re : Probleme d'affichage du MBR
Bonjour.
Je ne vois pas clairement d'ou peut venir le problème.
Le script grub.cfg contient bien les lignes pour activer l'affichage du menu.
Je l'ai par ailleurs vérifié avec grub-script-check. Qui ne détecte pas d'erreur de syntaxe.
En attendant mieux. Il doit être possible de forcer l'affichage du menu de démarrage en appuyant sur la touche MAJ ou sur la touche Echap (Esc) pendant le démarrage (Appuis successif rapides fonctionnent parfois mieux que maintenir la touche enfoncée)
L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)
Hors ligne
#3 Le 26/04/2016, à 17:01
- moko138
Re : Probleme d'affichage du MBR
Cela est survenu après que mon fils pendant mon absence ait installé un nouvel écran qui affiche juste avant Linux "D-SUB coupure".
Est-ce un remplacement d'écran ou un ajout d'écran ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 26/04/2016, à 18:05
- kholo
Re : Probleme d'affichage du MBR
bonjour,
Pour une raison que j'ignore, je n'ai plus l'affichage du mbr au démarrage et donc ne peux plus choisir Windows ou linux.
certains écrans ont des problèmes en console mais fonctionnent en desktop
pour le vérifier, sous Ubuntu
passes en console avec Ctrl + Alt + F1
(ça marche avec F2 à F6)
si les écritures sont lisible, ça élimine cette possibilité
pour revenir au bureau : Ctrl + Alt + F7
ensuite, quelques fois le bureau s'affiche sur un autre écran (cas d'un écran + TV par exemple)
(bien vérifier qu'il n'y ai qu'un seul écran branché sur l'ordi)
on a aussi des écrans qui mettent du temps à s'allumer
-> en tapotant flèche du haut puis flèche du bas lors du démarrage, on coupe de compteur du grub
et ça laisse le temps à l'écran de s'allumer.
Dernière modification par kholo (Le 26/04/2016, à 18:06)
Hors ligne
#5 Le 26/04/2016, à 18:18
- maxire
Re : Probleme d'affichage du MBR
Salut,
Cela sent la bascule d'une connexion écran VGA (D-SUB) vers du DVI en cas de remplacement d'écran.
Comme l'a remarqué Moko138, est-ce un ajout ou un remplacement d'écran, en cas d'ajout, comment les écrans sont-ils connectés à l'ordinataur?
1 écran VGA + 1 écran DVI ou autre chose?
Une fois que j'ai dit cela je ne vois pas vraiment de solution, difficile à déterminer sans avoir le matériel sous la main.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#6 Le 28/04/2016, à 03:37
- ccathy86
Re : Probleme d'affichage du MBR
Bonjour,
Merci à tous pour s'être penché sur mon problème.
Il s'agit d'un remplacement d'écran; pas d'autres écran connecté.
Ctr + alt + F1 : ça marche.
J'ai réussi depuis dimanche à récupérer un écran noir (alors qu'avant il était mauve) avec le choix de mes systèmes. En fait je pense que j'ai un récupéré un ancien grub en suivant un tuto (il s’agissait d'enlever un # devant grub ...
J'aimerais bien revenir au grub normal (soit le grub2 je suppose).
J'ai donc refait un boot-repair : voici le nouveau bootinfo :http://paste.ubuntu.com/16058732
je n'ai pas eu le temps de me replonger dans la doc ubuntu pour grub2 vu le reatrd que j'ai pris sur windows.
Si vous pouvez me donner un coup de main, ce ne serait pas de refus.
Merci d'avance.
Hors ligne
#7 Le 28/04/2016, à 09:58
- kholo
Re : Probleme d'affichage du MBR
bonjour, voici ton boot info,
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Recovery: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 80169512 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 9,661,679 9,661,617 b W95 FAT32
/dev/sda2 * 9,661,680 77,832,191 68,170,512 7 NTFS / exFAT / HPFS
/dev/sda3 77,834,238 240,119,807 162,285,570 5 Extended
/dev/sda5 77,834,240 111,626,239 33,792,000 83 Linux
/dev/sda6 111,628,288 123,570,175 11,941,888 82 Linux swap / Solaris
/dev/sda7 167,118,848 203,253,759 36,134,912 83 Linux
/dev/sda8 123,572,224 167,116,799 43,544,576 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 092D-20D2 vfat HP_RECOVERY
/dev/sda2 5A34FD5134FD311D ntfs HP_PAVILION
/dev/sda5 cf240385-b560-4b69-b088-362772878b0e ext4 LINUX
/dev/sda6 0c197043-8b84-46f4-a164-876590d004bb swap CATHY-SWAP
/dev/sda7 7dc4eb4b-7089-4370-8e45-e0bd289ea88e ext4 LINUXDATA
/dev/sda8 d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326 ext4 LINUXHOME
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 26 03:38 ata-Hewlett-Packard_DVD_Writer_300 -> ../../sr1
lrwxrwxrwx 1 root root 9 Apr 26 03:38 ata-IDE-DVD_ROM_16x -> ../../sr0
lrwxrwxrwx 1 root root 9 Apr 26 04:16 ata-Maxtor_6Y120L0_Y3KQQ0HE -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 26 04:16 ata-Maxtor_6Y120L0_Y3KQQ0HE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Apr 26 03:38 ata-Maxtor_6Y120L0_Y3KQQ0HE-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 Apr 26 04:16 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 26 04:16 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Apr 26 03:38 scsi-SATA_Maxtor_6Y120L0_Y3KQQ0HE-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-EPSON_Storage_4E3941593032303694-0:0 -> ../../sdf
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-EPSON_Storage_4E3941593032303694-0:1 -> ../../sdg
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-Generic_USB_CF_Reader_9206051-0:1 -> ../../sdc
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-Generic_USB_MS_Reader_9206051-0:3 -> ../../sde
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-Generic_USB_SD_Reader_9206051-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 Apr 26 03:38 usb-Generic_USB_SM_Reader_9206051-0:2 -> ../../sdd
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
/dev/sda7 /media/LINUXDATA ext4 (rw,nosuid,nodev,uhelper=hal)
/dev/sda8 /home ext4 (rw,nosuid,nodev,uhelper=hal)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=0
default=C:\CMDCONS\BOOTSECT.DAT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
--------------------------------------------------------------------------------
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=20
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptIn
C:\CMDCONS\BOOTSECT.DAT="Console de rcupration Microsoft Windows XP" /cmdcons
--------------------------------------------------------------------------------
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
terminal_input console
terminal_output console
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-102-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root cf240385-b560-4b69-b088-362772878b0e
linux /boot/vmlinuz-3.2.0-102-generic-pae root=UUID=cf240385-b560-4b69-b088-362772878b0e ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-102-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-102-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root cf240385-b560-4b69-b088-362772878b0e
echo 'Loading Linux 3.2.0-102-generic-pae ...'
linux /boot/vmlinuz-3.2.0-102-generic-pae root=UUID=cf240385-b560-4b69-b088-362772878b0e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-102-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod fat
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 092D-20D2
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 5A34FD5134FD311D
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sda5 :
LABEL=LINUX / ext4 errors=remount-ro 0 1
#Entry for /dev/sda7 :
LABEL=LINUXDATA /media/LINUXDATA ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda8 :
LABEL=LINUXHOME /home ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda6 :
LABEL=CATHY-SWAP none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda5/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
45.246803284 = 48.583385088 boot/grub/grub.cfg 1
38.352703094 = 41.180901376 boot/grub/core.img 1
46.599445343 = 50.035773440 boot/vmlinuz-3.2.0-102-generic-pae 1
46.599445343 = 50.035773440 vmlinuz 1
46.745201111 = 50.192277504 boot/initrd.img-3.2.0-102-generic-pae 2
46.745201111 = 50.192277504 initrd.img 2
================= sda5: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
43.245784760 = 46.434807808 boot/extlinux/extlinux.conf 1
40.218250275 = 43.184017408 boot/extlinux/chain.c32 1
============== sda5: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 c6 e6 ee 31 24 cb 9d 91 9e b9 ae 37 54 d5 ae 75 |...1$......7T..u|
00000010 47 8b 79 75 80 0c 6d 27 19 af 9e 51 92 f5 39 aa |G.yu..m'...Q..9.|
00000020 cf da 4a f2 2b da e9 90 dd 15 94 5c 08 84 7c b2 |..J.+......\..|.|
00000030 a9 f5 f5 ad 3b cd 4a db 4f 80 da a4 60 b1 1d 72 |....;.J.O...`..r|
00000040 08 fa d7 4c 94 9b 52 7d 4e 7a 95 12 4d 1c 25 c5 |...L..R}Nz..M.%.|
00000050 d5 d5 e5 c3 40 51 9e 3e a5 e3 38 1c f7 fc 2a 92 |....@Q.>..8...*.|
00000060 cb 71 67 2a 2d ab b3 39 63 86 27 3c 57 a9 69 4a |.qg*-..9c.'<W.iJ|
00000070 aa 4c f2 e8 4e 53 ae e5 d3 a9 d6 e8 9a 9c 8c 23 |.L..NS.........#|
00000080 8a e2 7c 4c f2 64 31 1c 9f 6a f4 13 0c 77 01 46 |..|L.d1..j...w.F|
00000090 ef 30 f5 e7 8c 52 8c 54 64 db eb b1 e9 4e ad a4 |.0...R.Td....N..|
000000a0 d4 77 44 2f a6 ae e0 46 54 7a fa d2 ad bb 42 7e |.wD/...FTz....B~|
000000b0 f1 31 9f 53 c0 ae ba 7a ae 56 72 54 bd 38 7b 47 |.1.S...z.VrT.8{G|
000000c0 bf f5 72 cc 6f 0c 13 36 d7 de 71 d4 56 a5 bd cc |..r.o..6..q.V...|
000000d0 53 ac b1 33 7e f0 60 85 ee 6b 7b 7e f2 ec f2 2b |S..3~.`..k{~...+|
000000e0 42 6a cd 6c cc 9b cb 38 27 05 92 32 26 cf 24 9e |Bj.l...8'..2&.$.|
000000f0 2a a3 e8 8f 1c 0d 73 1d d9 23 20 14 c7 2a 7d 6b |*.....s..# ..*}k|
00000100 77 68 36 fb 9e d4 79 94 94 66 f6 18 52 e5 cc 7b |wh6...y..f..R..{|
00000110 98 ef e1 77 7a 8a d5 1e 1b be bc 56 1e 4b 2c 7d |...wz......V.K,}|
00000120 ce 71 4a 49 28 1c 75 a3 2f 6b ed 23 b1 5a 7d 2e |.qJI(.u./k.#.Z}.|
00000130 0d 39 a2 17 23 6c 8a c1 94 b1 e4 9a d1 96 ee d6 |.9..#l..........|
00000140 60 db 23 c0 3d 4a f4 6f 5c d7 1c 23 2a b3 74 de |`.#.=J.o\..#*.t.|
00000150 da 9d 15 1c 55 2f 6c b7 47 2f ae 41 3d b5 cc 1b |....U/l.G/.A=...|
00000160 03 f9 2e 81 cb 64 ed 15 77 4a 0c 57 28 d8 72 7e |.....d..wJ.W(.r~|
00000170 6e 7a d7 6d 36 e9 45 41 9e 24 a1 2c 44 1c fe 67 |nz.m6.EA.$.,D..g|
00000180 5a 2d 52 68 c7 98 06 3b 83 de b9 8d 4a db ec 6f |Z-Rh...;....J..o|
00000190 e6 46 9f b9 27 1f 8d 15 5b 72 51 4c d6 12 8c 2b |.F..'...[rQL...+|
000001a0 59 ec c9 2c ae 5b f7 61 9b 30 ee c9 3d eb a6 b3 |Y..,.[.a.0..=...|
000001b0 b9 b6 99 ca 6d 18 cf 04 f7 ab 5c d1 a8 f9 00 ef |....m.....\.....|
000001c0 ff ff 83 ef ff ff 02 00 00 00 00 a0 03 02 00 ef |................|
000001d0 ff ff 05 ef ff ff 02 a0 03 02 00 40 b6 00 00 00 |...........@....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb sdc sdd sde sdf sdg
=============================== StdErr Messages: ===============================
File descriptor 6 (/proc/3640/mounts) leaked on lvs invocation. Parent PID 14711: bash
File descriptor 63 (pipe:[182795]) leaked on lvs invocation. Parent PID 14711: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2016-04-26__04h15 ===================
boot-repair version : 4ppa36
boot-sav version : 4ppa36
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa36
File descriptor 6 (/proc/3640/mounts) leaked on lvs invocation. Parent PID 5472: /bin/sh
No volume groups found
boot-repair is executed in installed-session (Ubuntu 12.04.5 LTS, precise, Ubuntu, i686)
CPU op-mode(s): 32-bit
BOOT_IMAGE=/boot/vmlinuz-3.2.0-102-generic-pae root=UUID=cf240385-b560-4b69-b088-362772878b0e ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda5:L'OS actuellement utilisé - Ubuntu 12.04.5 LTS CurrentSession:linux
/dev/sda1:Windows NT/2000/XP:Windows:chain
/dev/sda2:Microsoft Windows XP Home Edition:Windows1:chain
=================== blkid:
/dev/sda1: LABEL="HP_RECOVERY" UUID="092D-20D2" TYPE="vfat"
/dev/sda2: LABEL="HP_PAVILION" UUID="5A34FD5134FD311D" TYPE="ntfs"
/dev/sda5: LABEL="LINUX" UUID="cf240385-b560-4b69-b088-362772878b0e" TYPE="ext4"
/dev/sda6: LABEL="CATHY-SWAP" UUID="0c197043-8b84-46f4-a164-876590d004bb" TYPE="swap"
/dev/sda7: LABEL="LINUXDATA" UUID="7dc4eb4b-7089-4370-8e45-e0bd289ea88e" TYPE="ext4"
/dev/sda8: LABEL="LINUXHOME" UUID="d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326" TYPE="ext4"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 22 04:09 grub.d
drwxr-xr-x 2 root root 4096 avril 22 04:07 grub.d.bak
total 56
-rwxr-xr-x 1 root root 7806 déc. 15 16:56 00_header
-rwxr-xr-x 1 root root 5522 déc. 15 16:43 05_debian_theme
-rwxr-xr-x 1 root root 7877 déc. 15 16:56 10_linux
-rwxr-xr-x 1 root root 6449 déc. 15 16:56 20_linux_xen
-rwxr-xr-x 1 root root 6675 déc. 15 16:56 30_os-prober
-rwxr-xr-x 1 root root 1388 déc. 15 16:56 30_uefi-firmware
-rwxr-xr-x 1 root root 214 déc. 15 16:56 40_custom
-rwxr-xr-x 1 root root 95 déc. 15 16:56 41_custom
-rw-r--r-- 1 root root 483 déc. 15 16:56 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, NTLDR, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, ntldr, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/LINUXDATA.
sda8 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /home.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA Maxtor 6Y120L0 (scsi)
Disk /dev/sda: 123GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 4947MB 4947MB primary fat32
2 4947MB 39.9GB 34.9GB primary ntfs boot
3 39.9GB 123GB 83.1GB extended
5 39.9GB 57.2GB 17.3GB logical ext4
6 57.2GB 63.3GB 6114MB logical linux-swap(v1)
8 63.3GB 85.6GB 22.3GB logical ext4
7 85.6GB 104GB 18.5GB logical ext4
=================== parted -lm:
BYT;
/dev/sda:123GB:scsi:512:512:msdos:ATA Maxtor 6Y120L0;
1:32.3kB:4947MB:4947MB:fat32::;
2:4947MB:39.9GB:34.9GB:ntfs::boot;
3:39.9GB:123GB:83.1GB:::;
5:39.9GB:57.2GB:17.3GB:ext4::;
6:57.2GB:63.3GB:6114MB:linux-swap(v1)::;
8:63.3GB:85.6GB:22.3GB:ext4::;
7:85.6GB:104GB:18.5GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 114,5G
sda1 part vfat 4,6G HP_RECOVERY
sda2 part ntfs 32,5G HP_PAVILION
sda3 part 1K
sda5 part ext4 16,1G LINUX
sda6 part swap 5,7G CATHY-SWAP
sda7 part ext4 17,2G LINUXDATA
sda8 part ext4 20,8G LINUXHOME
sr0 rom 1024M
sr1 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda5 1 0 0 /
sda6 1 0 0 [SWAP]
sda7 1 0 0 /media/LINUXDATA
sda8 1 0 0 /home
sr0 1 0 1 running
sr1 1 0 1 running
=================== mount:
/dev/sda5 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/sda7 on /media/LINUXDATA type ext4 (rw,nosuid,nodev,uhelper=hal)
/dev/sda8 on /home type ext4 (rw,nosuid,nodev,uhelper=hal)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/cathy/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=cathy)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/fd0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdg (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrom1 cdrw1 char console core cpu cpu_dma_latency disk dri dvd dvd1 ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log lp0 mapper mcelog mem net network_latency network_throughput null oldmem parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdc sdd sde sdf sdg sg0 sg1 sg2 sg3 sg4 sg5 sg6 sg7 sg8 shm snapshot snd sr0 sr1 stderr stdin stdout uinput urandom usb usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 vga_arbiter zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 e9 a9 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 3f 00 00 00 |........?...?...|
00000020 aa 6c 93 00 c9 24 00 00 00 00 00 00 02 00 00 00 |.l...$..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 d2 20 2d 09 20 20 20 20 20 20 20 20 20 |..). -. |
00000050 20 20 46 41 54 33 32 20 20 20 66 c1 e0 02 8b d0 | FAT32 f.....|
00000060 81 e2 ff 01 66 c1 e8 09 66 3b 46 f8 74 2a 66 89 |....f...f;F.t*f.|
00000070 46 f8 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f |F.f.F.f..^(...t.|
00000080 3a 5e 10 0f 83 8d 00 66 0f af 5e 24 66 03 c3 bb |:^.....f..^$f...|
00000090 e0 07 b9 01 00 e8 d2 00 8b da 66 8b 87 00 7e 66 |..........f...~f|
000000a0 25 ff ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 |%....f=.....3...|
000000b0 8e c1 8e d1 bc f4 7b bd 00 7c 66 0f b6 46 10 66 |......{..|f..F.f|
000000c0 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 f4 |.f$f..V.f.V.f.V.|
000000d0 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff 66 |f..f.F.f.F.....f|
000000e0 8b 46 2c 66 50 e8 a4 00 bb 70 00 b9 01 00 e8 79 |.F,fP....p.....y|
000000f0 00 bf 00 07 b1 0b be 9d 7d f3 a6 74 2a 03 f9 83 |........}..t*...|
00000100 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 e8 |......r.f@Ju.fX.|
00000110 48 ff 72 cf be a8 7d ac 84 c0 74 09 b4 0e bb 07 |H.r...}...t.....|
00000120 00 cd 10 eb f2 cd 18 66 58 ff 75 09 ff 75 0f 66 |.......fX.u..u.f|
00000130 58 66 83 f8 02 72 dd 66 3d f8 ff ff 0f 73 d5 66 |Xf...r.f=....s.f|
00000140 50 e8 48 00 3e 8b 9e 68 01 32 ed 8a 4e 0d e8 19 |P.H.>..h.2..N...|
00000150 00 c1 e1 05 3e 01 8e 68 01 66 58 e8 fc fe 72 d1 |....>..h.fX...r.|
00000160 8a 56 40 ea 00 00 00 20 00 20 66 60 66 6a 00 66 |.V@.... . f`fj.f|
00000170 50 53 6a 00 51 6a 10 8b f4 b8 00 42 8a 56 40 cd |PSj.Qj.....B.V@.|
00000180 13 83 c4 10 be c0 7d 72 8e 66 61 c3 66 48 66 48 |......}r.fa.fHfH|
00000190 66 0f b6 56 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c |f..V.f..f.F..NTL|
000001a0 44 52 20 20 20 20 20 20 0d 0a 49 6e 76 61 6c 69 |DR ..Invali|
000001b0 64 20 53 79 73 74 65 6d 20 44 69 73 6b 20 6f 72 |d System Disk or|
000001c0 0d 0a 44 69 73 6b 20 49 2f 4f 20 65 72 72 6f 72 |..Disk I/O error|
000001d0 0d 0a 50 72 65 73 73 20 61 20 6b 65 79 20 74 6f |..Press a key to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 f0 6c 93 00 |........?....l..|
00000020 00 00 00 00 80 00 80 00 08 33 10 04 00 00 00 00 |.........3......|
00000030 00 00 0c 00 00 00 00 00 44 93 65 00 00 00 00 00 |........D.e.....|
00000040 f6 00 00 00 01 00 00 00 1d 31 fd 34 51 fd 34 5a |.........1.4Q.4Z|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda5 ext4 16G 5.6G 9.5G 38% /
udev devtmpfs 494M 12K 494M 1% /dev
tmpfs tmpfs 101M 1008K 100M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 501M 148K 501M 1% /run/shm
/dev/sda7 ext4 17G 320M 16G 2% /media/LINUXDATA
/dev/sda8 ext4 21G 7.4G 13G 38% /home
/dev/sda1 vfat 4.6G 4.2G 457M 91% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 33G 23G 9.9G 70% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5e7ceee9
Device Boot Start End Blocks Id System
/dev/sda1 63 9661679 4830808+ b W95 FAT32
/dev/sda2 * 9661680 77832191 34085256 7 HPFS/NTFS/exFAT
/dev/sda3 77834238 240119807 81142785 5 Extended
/dev/sda5 77834240 111626239 16896000 83 Linux
/dev/sda6 111628288 123570175 5970944 82 Linux swap / Solaris
/dev/sda7 167118848 203253759 18067456 83 Linux
/dev/sda8 123572224 167116799 21772288 83 Linux
Partition table entries are not in disk order
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub2 of sda5 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200] [1002:5961] (rev 01)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:2002]
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
*******
grub-install --version
grub-install (GRUB) 1.99-21ubuntu3.19,grub-install (GRUB) 1.
Reinstall the GRUB of sda5 into the MBR of sda
grub-install /dev/sda: Installation finished. No error reported.
exit code of grub-install /dev/sda:0
update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-102-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-102-generic-pae
File descriptor 6 (/proc/3640/mounts) leaked on lvs invocation. Parent PID 12523: /bin/sh
No volume groups found
Found Windows NT/2000/XP on /dev/sda1
Found Microsoft Windows XP Home Edition on /dev/sda2
Unhide GRUB boot menu in sda5/boot/grub/grub.cfg
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.
Hors ligne
#8 Le 28/04/2016, à 11:07
- jamesbad000
Re : Probleme d'affichage du MBR
Dans "options avancées" de boot repair il doit y avoir une option "purge" qui réinstalle tous les paquets grub.
L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)
Hors ligne
#9 Le 28/04/2016, à 11:24
- kholo
Re : Probleme d'affichage du MBR
ta carte graphique : 1002:5961
*******lspci -nnk | grep -iA3 vga
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200] [1002:5961] (rev 01)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:2002]
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
Cela est survenu après que mon fils pendant mon absence ait installé un nouvel écran qui affiche juste avant Linux "D-SUB coupure". mais je ne vois pas trop le rapport avec mon problème.
on pourrait avoir la référence de l'écran et le type de connexion
VGA ?
DVI ?
déjà "juste avant Linux" doit être plutôt : "jusqu'au DM"
je pense que tout s'affiche mais que l'écran n'est pas dans le bon mode au moment où grub s'affiche
les 10 sec passent et Ubuntu est lancé automatiquement.
dans ton /etc/default/grub (sf doc)
#GRUB_HIDDEN_TIMEOUT=0 : avec le croisillon « # », le menu de grub est visible.
Sans le « # », le menu de grub serait invisible
déjà, tu peux modifier le grub pour qu'il te laisse
plus de temps pour trouver la combine qui affichera grub
editer /etc/default/grub
sudo nano /etc/default/grub
et changer
GRUB_TIMEOUT=10
par
GRUB_TIMEOUT=30
en même temps, tente de mettre un croisillon pour avoir cette ligne
#GRUB_TERMINAL=console
qui devrait être mis par défaut (modifications par qui ?)
("Ctrl + X" puis "o" puis "Entrée" pour quitter)
edit moko138 correction faite
("Ctrl + X" puis "Ctrl + o" puis "Entrée" pour quitter)
pour valider
sudo update-grub
ensuite, il faut prendre le temps de voir se qui se passe au démarrage :
un bouton pour changer de mode ?
un menu ?
un mode forcé vers vga / dvi / automatique ?
NB :
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
pas de problème de chevauchement :
Device Boot Start End Blocks Id System
/dev/sda2 * 9661680 77832191 34085256 7 HPFS/NTFS/exFAT
/dev/sda3 77834238 240119807 81142785 5 Extended
et ces discussion sur la carte graphique
https://forum.ubuntu-fr.org/viewtopic.php?id=1964511
https://forum.ubuntu-fr.org/viewtopic.p … 9#p4020739
https://forum.ubuntu-fr.org/viewtopic.php?id=202936
Dernière modification par kholo (Le 01/05/2016, à 11:17)
Hors ligne
#10 Le 28/04/2016, à 13:53
- moko138
Re : Probleme d'affichage du MBR
editer /etc/default/grub
sudo nano /etc/default/grub
(...)
("Ctrl + X" puis "o" puis "Entrée" pour quitter)
Attention ! C'est en réalité
Ctrl o puis Entrée pour enregistrer et valider
puis
Ctrl x pour quitter.
- -
Si on commence par Ctrl x on quitte sans enregistrer !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 28/04/2016, à 14:19
- kholo
Re : Probleme d'affichage du MBR
kholo a écrit :editer /etc/default/grub
sudo nano /etc/default/grub
(...)
("Ctrl + X" puis "o" puis "Entrée" pour quitter)Attention ! C'est en réalité
Ctrl o puis Entrée pour enregistrer et valider
puis
Ctrl x pour quitter.
- -Si on commence par Ctrl x on quitte sans enregistrer !
oui j'ai oublié un ctrl, c'est rectifié !
si le fichier est modifié il propose l'enregistrement par défaut
edit : j'ai remis l'ordre et mes raccourcis
ctrl + x ; demande de quitter
o : pour confirmer et valider les modifications faites
entrer : pour conserver le nom du fichier et faire l'enregistrement
c'est sans doute une mauvaise habitude mais je fais comme ça
Dernière modification par kholo (Le 01/05/2016, à 11:20)
Hors ligne
#12 Le 01/05/2016, à 11:08
- ccathy86
Re : Probleme d'affichage du MBR
Bonjour,
J'ai fait un boot-repair en cochant purger grub et passer grub à sa version la plus récente.
Maintenant, c'est une catastrophe car le mbr s'affiche mais il n'y a plus de Linux.
J'ai donc mis en boot un cd de boot-repair qui démarre mais affiche "apt error détecté".il propose "sudo chroot "/mnt/boot-sav/sda5" apt-get -f install" mais après m'avoir demandé de l'espace disque supplémentaire, affiche "E: Internal Error, No file name for libpython2.7-minimal".
Voici la copie du Boot-info :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Recovery: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 80169512 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /etc/fstab /boot/extlinux/extlinux.conf
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 9,661,679 9,661,617 b W95 FAT32
/dev/sda2 * 9,661,680 77,832,191 68,170,512 7 NTFS / exFAT / HPFS
/dev/sda3 77,834,238 240,119,807 162,285,570 5 Extended
/dev/sda5 77,834,240 111,626,239 33,792,000 83 Linux
/dev/sda6 111,628,288 123,570,175 11,941,888 82 Linux swap / Solaris
/dev/sda7 167,118,848 203,253,759 36,134,912 83 Linux
/dev/sda8 123,572,224 167,116,799 43,544,576 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 092D-20D2 vfat HP_RECOVERY
/dev/sda2 5A34FD5134FD311D ntfs HP_PAVILION
/dev/sda5 cf240385-b560-4b69-b088-362772878b0e ext4 LINUX
/dev/sda6 0c197043-8b84-46f4-a164-876590d004bb swap CATHY-SWAP
/dev/sda7 7dc4eb4b-7089-4370-8e45-e0bd289ea88e ext4 LINUXDATA
/dev/sda8 d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326 ext4 LINUXHOME
/dev/sr1 iso9660 Boot-Repair-Disk 32bit
/dev/zram0 bd8ca572-bb58-4dba-8f7e-b06e8dcf3906 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 1 08:26 ata-Hewlett-Packard_DVD_Writer_300 -> ../../sr1
lrwxrwxrwx 1 root root 9 May 1 08:26 ata-IDE-DVD_ROM_16x -> ../../sr0
lrwxrwxrwx 1 root root 9 May 1 08:27 ata-Maxtor_6Y120L0_Y3KQQ0HE -> ../../sda
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 1 08:31 ata-Maxtor_6Y120L0_Y3KQQ0HE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 May 1 08:26 ata-Maxtor_6Y120L0_Y3KQQ0HE-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-EPSON_Storage_4E3941593032303694-0:0 -> ../../sdf
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-EPSON_Storage_4E3941593032303694-0:1 -> ../../sdg
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-Generic_USB_CF_Reader_9206051-0:1 -> ../../sdc
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-Generic_USB_MS_Reader_9206051-0:3 -> ../../sde
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-Generic_USB_SD_Reader_9206051-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 May 1 08:26 usb-Generic_USB_SM_Reader_9206051-0:2 -> ../../sdd
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr1 /cdrom iso9660 (ro,noatime)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=0
default=C:\CMDCONS\BOOTSECT.DAT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
--------------------------------------------------------------------------------
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=20
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptIn
C:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /cmdcons
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sda5 :
LABEL=LINUX / ext4 errors=remount-ro 0 1
#Entry for /dev/sda7 :
LABEL=LINUXDATA /media/LINUXDATA ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda8 :
LABEL=LINUXHOME /home ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda6 :
LABEL=CATHY-SWAP none swap sw 0 0
#UUID=7dc4eb4b-7089-4370-8e45-e0bd289ea88e /boot ext4 defaults 0 2
#UUID=7dc4eb4b-7089-4370-8e45-e0bd289ea88e /boot ext4 defaults 0 2
--------------------------------------------------------------------------------
====================== sda5/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
============== sda5: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 c6 e6 ee 31 24 cb 9d 91 9e b9 ae 37 54 d5 ae 75 |...1$......7T..u|
00000010 47 8b 79 75 80 0c 6d 27 19 af 9e 51 92 f5 39 aa |G.yu..m'...Q..9.|
00000020 cf da 4a f2 2b da e9 90 dd 15 94 5c 08 84 7c b2 |..J.+......\..|.|
00000030 a9 f5 f5 ad 3b cd 4a db 4f 80 da a4 60 b1 1d 72 |....;.J.O...`..r|
00000040 08 fa d7 4c 94 9b 52 7d 4e 7a 95 12 4d 1c 25 c5 |...L..R}Nz..M.%.|
00000050 d5 d5 e5 c3 40 51 9e 3e a5 e3 38 1c f7 fc 2a 92 |....@Q.>..8...*.|
00000060 cb 71 67 2a 2d ab b3 39 63 86 27 3c 57 a9 69 4a |.qg*-..9c.'<W.iJ|
00000070 aa 4c f2 e8 4e 53 ae e5 d3 a9 d6 e8 9a 9c 8c 23 |.L..NS.........#|
00000080 8a e2 7c 4c f2 64 31 1c 9f 6a f4 13 0c 77 01 46 |..|L.d1..j...w.F|
00000090 ef 30 f5 e7 8c 52 8c 54 64 db eb b1 e9 4e ad a4 |.0...R.Td....N..|
000000a0 d4 77 44 2f a6 ae e0 46 54 7a fa d2 ad bb 42 7e |.wD/...FTz....B~|
000000b0 f1 31 9f 53 c0 ae ba 7a ae 56 72 54 bd 38 7b 47 |.1.S...z.VrT.8{G|
000000c0 bf f5 72 cc 6f 0c 13 36 d7 de 71 d4 56 a5 bd cc |..r.o..6..q.V...|
000000d0 53 ac b1 33 7e f0 60 85 ee 6b 7b 7e f2 ec f2 2b |S..3~.`..k{~...+|
000000e0 42 6a cd 6c cc 9b cb 38 27 05 92 32 26 cf 24 9e |Bj.l...8'..2&.$.|
000000f0 2a a3 e8 8f 1c 0d 73 1d d9 23 20 14 c7 2a 7d 6b |*.....s..# ..*}k|
00000100 77 68 36 fb 9e d4 79 94 94 66 f6 18 52 e5 cc 7b |wh6...y..f..R..{|
00000110 98 ef e1 77 7a 8a d5 1e 1b be bc 56 1e 4b 2c 7d |...wz......V.K,}|
00000120 ce 71 4a 49 28 1c 75 a3 2f 6b ed 23 b1 5a 7d 2e |.qJI(.u./k.#.Z}.|
00000130 0d 39 a2 17 23 6c 8a c1 94 b1 e4 9a d1 96 ee d6 |.9..#l..........|
00000140 60 db 23 c0 3d 4a f4 6f 5c d7 1c 23 2a b3 74 de |`.#.=J.o\..#*.t.|
00000150 da 9d 15 1c 55 2f 6c b7 47 2f ae 41 3d b5 cc 1b |....U/l.G/.A=...|
00000160 03 f9 2e 81 cb 64 ed 15 77 4a 0c 57 28 d8 72 7e |.....d..wJ.W(.r~|
00000170 6e 7a d7 6d 36 e9 45 41 9e 24 a1 2c 44 1c fe 67 |nz.m6.EA.$.,D..g|
00000180 5a 2d 52 68 c7 98 06 3b 83 de b9 8d 4a db ec 6f |Z-Rh...;....J..o|
00000190 e6 46 9f b9 27 1f 8d 15 5b 72 51 4c d6 12 8c 2b |.F..'...[rQL...+|
000001a0 59 ec c9 2c ae 5b f7 61 9b 30 ee c9 3d eb a6 b3 |Y..,.[.a.0..=...|
000001b0 b9 b6 99 ca 6d 18 cf 04 f7 ab 5c d1 a8 f9 00 ef |....m.....\.....|
000001c0 ff ff 83 ef ff ff 02 00 00 00 00 a0 03 02 00 ef |................|
000001d0 ff ff 05 ef ff ff 02 a0 03 02 00 40 b6 00 00 00 |...........@....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb sdc sdd sde sdf sdg
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/2861/mounts) leaked on lvs invocation. Parent PID 17252: bash
File descriptor 63 (pipe:[30074]) leaked on lvs invocation. Parent PID 17252: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2016-05-01__08h27 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2861/mounts) leaked on lvs invocation. Parent PID 4759: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 29nov2014, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
=================== os-prober:
/dev/sda1:Windows NT/2000/XP:Windows:chain
/dev/sda2:Microsoft Windows XP Home Edition:Windows1:chain
/dev/sda5:Ubuntu 12.04.5 LTS (12.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="HP_RECOVERY" UUID="092D-20D2" TYPE="vfat"
/dev/sda2: LABEL="HP_PAVILION" UUID="5A34FD5134FD311D" TYPE="ntfs"
/dev/sda5: LABEL="LINUX" UUID="cf240385-b560-4b69-b088-362772878b0e" TYPE="ext4"
/dev/sda6: LABEL="CATHY-SWAP" UUID="0c197043-8b84-46f4-a164-876590d004bb" TYPE="swap"
/dev/sda7: LABEL="LINUXDATA" UUID="7dc4eb4b-7089-4370-8e45-e0bd289ea88e" TYPE="ext4"
/dev/sda8: LABEL="LINUXHOME" UUID="d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326" TYPE="ext4"
/dev/sr1: LABEL="Boot-Repair-Disk 32bit" TYPE="iso9660"
/dev/zram0: UUID="bd8ca572-bb58-4dba-8f7e-b06e8dcf3906" TYPE="swap"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, NTLDR, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, ntldr, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sda5.
sda7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda8 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda8.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA Maxtor 6Y120L0 (scsi)
Disk /dev/sda: 123GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 4947MB 4947MB primary fat32
2 4947MB 39.9GB 34.9GB primary ntfs boot
3 39.9GB 123GB 83.1GB extended
5 39.9GB 57.2GB 17.3GB logical ext4
6 57.2GB 63.3GB 6114MB logical linux-swap(v1)
8 63.3GB 85.6GB 22.3GB logical ext4
7 85.6GB 104GB 18.5GB logical ext4
Warning: Unable to open /dev/sr1 read-write (Read-only file system). /dev/sr1
has been opened read-only.
Error: /dev/sr1: unrecognised disk label
Error: /dev/zram0: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:123GB:scsi:512:512:msdos:ATA Maxtor 6Y120L0;
1:32.3kB:4947MB:4947MB:fat32::;
2:4947MB:39.9GB:34.9GB:ntfs::boot;
3:39.9GB:123GB:83.1GB:::;
5:39.9GB:57.2GB:17.3GB:ext4::;
6:57.2GB:63.3GB:6114MB:linux-swap(v1)::;
8:63.3GB:85.6GB:22.3GB:ext4::;
7:85.6GB:104GB:18.5GB:ext4::;
Warning: Unable to open /dev/sr1 read-write (Read-only file system). /dev/sr1
has been opened read-only.
Error: /dev/sr1: unrecognised disk label
Error: /dev/zram0: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr1 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type ext4 (rw)
/dev/sda8 on /mnt/boot-sav/sda8 type ext4 (rw)
=================== ls:
/sys/block/fd0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdg (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdc sdd sde sdf sdg sg0 sg1 sg2 sg3 sg4 sg5 sg6 sg7 sg8 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 e9 a9 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 3f 00 00 00 |........?...?...|
00000020 aa 6c 93 00 c9 24 00 00 00 00 00 00 02 00 00 00 |.l...$..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 d2 20 2d 09 20 20 20 20 20 20 20 20 20 |..). -. |
00000050 20 20 46 41 54 33 32 20 20 20 66 c1 e0 02 8b d0 | FAT32 f.....|
00000060 81 e2 ff 01 66 c1 e8 09 66 3b 46 f8 74 2a 66 89 |....f...f;F.t*f.|
00000070 46 f8 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f |F.f.F.f..^(...t.|
00000080 3a 5e 10 0f 83 8d 00 66 0f af 5e 24 66 03 c3 bb |:^.....f..^$f...|
00000090 e0 07 b9 01 00 e8 d2 00 8b da 66 8b 87 00 7e 66 |..........f...~f|
000000a0 25 ff ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 |%....f=.....3...|
000000b0 8e c1 8e d1 bc f4 7b bd 00 7c 66 0f b6 46 10 66 |......{..|f..F.f|
000000c0 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 f4 |.f$f..V.f.V.f.V.|
000000d0 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff 66 |f..f.F.f.F.....f|
000000e0 8b 46 2c 66 50 e8 a4 00 bb 70 00 b9 01 00 e8 79 |.F,fP....p.....y|
000000f0 00 bf 00 07 b1 0b be 9d 7d f3 a6 74 2a 03 f9 83 |........}..t*...|
00000100 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 e8 |......r.f@Ju.fX.|
00000110 48 ff 72 cf be a8 7d ac 84 c0 74 09 b4 0e bb 07 |H.r...}...t.....|
00000120 00 cd 10 eb f2 cd 18 66 58 ff 75 09 ff 75 0f 66 |.......fX.u..u.f|
00000130 58 66 83 f8 02 72 dd 66 3d f8 ff ff 0f 73 d5 66 |Xf...r.f=....s.f|
00000140 50 e8 48 00 3e 8b 9e 68 01 32 ed 8a 4e 0d e8 19 |P.H.>..h.2..N...|
00000150 00 c1 e1 05 3e 01 8e 68 01 66 58 e8 fc fe 72 d1 |....>..h.fX...r.|
00000160 8a 56 40 ea 00 00 00 20 00 20 66 60 66 6a 00 66 |.V@.... . f`fj.f|
00000170 50 53 6a 00 51 6a 10 8b f4 b8 00 42 8a 56 40 cd |PSj.Qj.....B.V@.|
00000180 13 83 c4 10 be c0 7d 72 8e 66 61 c3 66 48 66 48 |......}r.fa.fHfH|
00000190 66 0f b6 56 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c |f..V.f..f.F..NTL|
000001a0 44 52 20 20 20 20 20 20 0d 0a 49 6e 76 61 6c 69 |DR ..Invali|
000001b0 64 20 53 79 73 74 65 6d 20 44 69 73 6b 20 6f 72 |d System Disk or|
000001c0 0d 0a 44 69 73 6b 20 49 2f 4f 20 65 72 72 6f 72 |..Disk I/O error|
000001d0 0d 0a 50 72 65 73 73 20 61 20 6b 65 79 20 74 6f |..Press a key to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 f0 6c 93 00 |........?....l..|
00000020 00 00 00 00 80 00 80 00 08 33 10 04 00 00 00 00 |.........3......|
00000030 00 00 0c 00 00 00 00 00 44 93 65 00 00 00 00 00 |........D.e.....|
00000040 f6 00 00 00 01 00 00 00 1d 31 fd 34 51 fd 34 5a |.........1.4Q.4Z|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 501M 13M 488M 3% /
udev devtmpfs 488M 12K 488M 1% /dev
tmpfs tmpfs 101M 1.1M 100M 2% /run
/dev/sr1 iso9660 599M 599M 0 100% /cdrom
/dev/loop0 squashfs 543M 543M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 501M 8.0K 501M 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 501M 0 501M 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 vfat 4.6G 4.2G 454M 91% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 33G 21G 13G 64% /mnt/boot-sav/sda2
/dev/sda5 ext4 16G 5.8G 9.2G 39% /mnt/boot-sav/sda5
/dev/sda7 ext4 17G 192M 16G 2% /mnt/boot-sav/sda7
/dev/sda8 ext4 21G 7.3G 12G 38% /mnt/boot-sav/sda8
=================== fdisk -l:
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5e7ceee9
Device Boot Start End Blocks Id System
/dev/sda1 63 9661679 4830808+ b W95 FAT32
/dev/sda2 * 9661680 77832191 34085256 7 HPFS/NTFS/exFAT
/dev/sda3 77834238 240119807 81142785 5 Extended
/dev/sda5 77834240 111626239 16896000 83 Linux
/dev/sda6 111628288 123570175 5970944 82 Linux swap / Solaris
/dev/sda7 167118848 203253759 18067456 83 Linux
/dev/sda8 123572224 167116799 21772288 83 Linux
Partition table entries are not in disk order
=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda, using the following options: kernel-purge
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
chroot /mnt/boot-sav/sda5 apt-get -y --force-yes update
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Impossible de récupérer [url]http://ppa.launchpad.net/andykimpe/freshplayerplugin-daily/dists/precise/main/source/Sources[/url] 404 Not Found
W: Impossible de récupérer [url]http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/Release[/url] Impossible de trouver l'entrée « main/source/Sources » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
W: Impossible de récupérer [url]http://dl.google.com/linux/chrome/deb/dists/stable/Release[/url] Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
purge_kernel of sda5
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: You may want to run apt-get update to correct these problems
linux-generic available
Lecture des listes de paquets...SET@_progressbar1.pulse()
Construction de l'arbre des dépendances...SET@_progressbar1.pulse()
Lecture des informations d'état...
Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes :
Les paquets suivants contiennent des dépendances non satisfaites :
aptdaemon : Dépend: python3-aptdaemon (= 1.1.1+bzr982-0ubuntu3) mais ne sera pas installé
Dépend: python3-gi mais ne sera pas installé
Recommande: lintian mais ne sera pas installé
hplip : Dépend: libsane-hpaio (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: hplip-data (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: printer-driver-hpcups (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
indicator-session : Dépend: systemd-services
Recommande: indicator-applet (>= 0.2) mais ne sera pas installé ou
indicator-renderer
Recommande: unity-control-center mais ne sera pas installé ou
gnome-control-center mais ne sera pas installé
Recommande: unity-control-center-signon mais ne sera pas installé ou
gnome-control-center-signon mais il n'est pas installable
libalgorithm-diff-xs-perl : Dépend: perlapi-5.14.2
libcairo-perl : Dépend: perlapi-5.14.2
libglib-perl : Dépend: perlapi-5.14.2
libglib2.0-dev : Dépend: libpcre3-dev (>= 1:8.31) mais 8.12-4ubuntu0.2 devra être installé
libgtk2-gladexml-perl : Dépend: perlapi-5.14.2
libgtk2-perl : Dépend: perlapi-5.14.2
libhpmud0 : Dépend: libsnmp15 (>= 5.4.3~dfsg) mais ne sera pas installé
libhtml-parser-perl : Dépend: perlapi-5.14.2
libnet-dbus-perl : Dépend: perlapi-5.14.2
libnet-ssleay-perl : Dépend: perlapi-5.14.2
libpam-systemd : Dépend: systemd (= 219-7ubuntu3) mais ne sera pas installé
libpango-perl : Dépend: perlapi-5.14.2
libperl5.14 : Dépend: perl-base (= 5.14.2-6ubuntu2.5) mais 5.20.2-2 devra être installé
libpurple0 : Dépend: perlapi-5.14.2
libsocket6-perl : Dépend: perlapi-5.14.2
libtext-charwidth-perl : Dépend: perlapi-5.14.2
libtext-iconv-perl : Dépend: perlapi-5.14.2
libuuid-perl : Dépend: perlapi-5.14.2
libxml-parser-perl : Dépend: perlapi-5.14.2
linux-generic : Dépend: linux-image-generic (= 3.19.0.15.14) mais ne sera pas installé
Dépend: linux-headers-generic (= 3.19.0.15.14) mais ne sera pas installé
printer-driver-hpijs : Dépend: libhpmud0 (= 3.15.2-0ubuntu4) mais 3.12.2-1ubuntu3.5 devra être installé
python-apt : Dépend: libapt-inst1.5 (>= 1.0.4~) mais ne sera pas installé
Dépend: libapt-pkg4.12 (>= 1.0.9.7ubuntu4) mais 0.8.16~exp12ubuntu10.26 devra être installé
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
E: Dépendances non satisfaites. Essayez « apt-get -f install » sans paquet
(ou indiquez une solution).
DEBCHECK debNG, linux-generic
DEBCHECKLINUX debNG
=================== linux-generic purge cancelled
apt-error détecté. Veuillez ouvrir un terminal et saisir (ou copier-coller) la commande suivante :
sudo chroot "/mnt/boot-sav/sda5" apt-get -f install
Puis fermez cette fenêtre.
Purge the GRUB of sda5
cp: cannot stat ‘/mnt/boot-sav/sda5/etc/default/grub’: No such file or directory
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: You may want to run apt-get update to correct these problems
grub-pc available
Lecture des listes de paquets...
Construction de l'arbre des dépendances...
Lecture des informations d'état...
Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes :
Les paquets suivants contiennent des dépendances non satisfaites :
aptdaemon : Dépend: python3-aptdaemon (= 1.1.1+bzr982-0ubuntu3) mais ne sera pas installé
Dépend: python3-gi mais ne sera pas installé
Recommande: lintian mais ne sera pas installé
grub-pc : Dépend: grub-common (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub2-common (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub-pc-bin (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub-gfxpayload-lists mais ne sera pas installé
hplip : Dépend: libsane-hpaio (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: hplip-data (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: printer-driver-hpcups (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
indicator-session : Dépend: systemd-services
Recommande: indicator-applet (>= 0.2) mais ne sera pas installé ou
indicator-renderer
Recommande: unity-control-center mais ne sera pas installé ou
gnome-control-center mais ne sera pas installé
Recommande: unity-control-center-signon mais ne sera pas installé ou
gnome-control-center-signon mais il n'est pas installable
libalgorithm-diff-xs-perl : Dépend: perlapi-5.14.2
libcairo-perl : Dépend: perlapi-5.14.2
libglib-perl : Dépend: perlapi-5.14.2
libglib2.0-dev : Dépend: libpcre3-dev (>= 1:8.31) mais 8.12-4ubuntu0.2 devra être installé
libgtk2-gladexml-perl : Dépend: perlapi-5.14.2
libgtk2-perl : Dépend: perlapi-5.14.2
libhpmud0 : Dépend: libsnmp15 (>= 5.4.3~dfsg) mais ne sera pas installé
libhtml-parser-perl : Dépend: perlapi-5.14.2
libnet-dbus-perl : Dépend: perlapi-5.14.2
libnet-ssleay-perl : Dépend: perlapi-5.14.2
libpam-systemd : Dépend: systemd (= 219-7ubuntu3) mais ne sera pas installé
libpango-perl : Dépend: perlapi-5.14.2
libperl5.14 : Dépend: perl-base (= 5.14.2-6ubuntu2.5) mais 5.20.2-2 devra être installé
libpurple0 : Dépend: perlapi-5.14.2
libsocket6-perl : Dépend: perlapi-5.14.2
libtext-charwidth-perl : Dépend: perlapi-5.14.2
libtext-iconv-perl : Dépend: perlapi-5.14.2
libuuid-perl : Dépend: perlapi-5.14.2
libxml-parser-perl : Dépend: perlapi-5.14.2
printer-driver-hpijs : Dépend: libhpmud0 (= 3.15.2-0ubuntu4) mais 3.12.2-1ubuntu3.5 devra être installé
python-apt : Dépend: libapt-inst1.5 (>= 1.0.4~) mais ne sera pas installé
Dépend: libapt-pkg4.12 (>= 1.0.9.7ubuntu4) mais 0.8.16~exp12ubuntu10.26 devra être installé
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
E: Dépendances non satisfaites. Essayez « apt-get -f install » sans paquet
(ou indiquez une solution).
DEBCHECK debNG, grub-pc
DEBCHECK debNG
/usr/share/boot-sav/gui-init.sh: line 66: kill: (9888) - No such process
=================== grub-pc purge cancelled
apt-error détecté. Veuillez ouvrir un terminal et saisir (ou copier-coller) la commande suivante :
sudo chroot "/mnt/boot-sav/sda5" apt-get -f install
Puis fermez cette fenêtre.
=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will purge (in order to fix packages fix executable) and reinstall the grub-pc of sda5 into the MBR of sda, using the following options: kernel-purge
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
Fixed /mnt/boot-sav/sda2/boot.ini
Fixed /mnt/boot-sav/sda2/ntldr
Fixed /mnt/boot-sav/sda2/NTDETECT.COM
umount: /mnt/boot-sav/sda1: not mounted
umount: /mnt/boot-sav/sda2: not mounted
chroot /mnt/boot-sav/sda5 apt-get -y --force-yes update
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Impossible de récupérer [url]http://dl.google.com/linux/chrome/deb/dists/stable/Release[/url] Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
W: Impossible de récupérer [url]http://ppa.launchpad.net/andykimpe/freshplayerplugin-daily/dists/precise/main/source/Sources[/url] 404 Not Found
W: Impossible de récupérer [url]http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/Release[/url] Impossible de trouver l'entrée « main/source/Sources » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
purge_kernel of sda5
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: You may want to run apt-get update to correct these problems
linux-generic available
Lecture des listes de paquets...SET@_progressbar1.pulse()
Construction de l'arbre des dépendances...SET@_progressbar1.pulse()
Lecture des informations d'état...
Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes :
Les paquets suivants contiennent des dépendances non satisfaites :
aptdaemon : Dépend: python3-aptdaemon (= 1.1.1+bzr982-0ubuntu3) mais ne sera pas installé
Dépend: python3-gi mais ne sera pas installé
Recommande: lintian mais ne sera pas installé
hplip : Dépend: libsane-hpaio (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: hplip-data (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: printer-driver-hpcups (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
indicator-session : Dépend: systemd-services
Recommande: indicator-applet (>= 0.2) mais ne sera pas installé ou
indicator-renderer
Recommande: unity-control-center mais ne sera pas installé ou
gnome-control-center mais ne sera pas installé
Recommande: unity-control-center-signon mais ne sera pas installé ou
gnome-control-center-signon mais il n'est pas installable
libalgorithm-diff-xs-perl : Dépend: perlapi-5.14.2
libcairo-perl : Dépend: perlapi-5.14.2
libglib-perl : Dépend: perlapi-5.14.2
libglib2.0-dev : Dépend: libpcre3-dev (>= 1:8.31) mais 8.12-4ubuntu0.2 devra être installé
libgtk2-gladexml-perl : Dépend: perlapi-5.14.2
libgtk2-perl : Dépend: perlapi-5.14.2
libhpmud0 : Dépend: libsnmp15 (>= 5.4.3~dfsg) mais ne sera pas installé
libhtml-parser-perl : Dépend: perlapi-5.14.2
libnet-dbus-perl : Dépend: perlapi-5.14.2
libnet-ssleay-perl : Dépend: perlapi-5.14.2
libpam-systemd : Dépend: systemd (= 219-7ubuntu3) mais ne sera pas installé
libpango-perl : Dépend: perlapi-5.14.2
libperl5.14 : Dépend: perl-base (= 5.14.2-6ubuntu2.5) mais 5.20.2-2 devra être installé
libpurple0 : Dépend: perlapi-5.14.2
libsocket6-perl : Dépend: perlapi-5.14.2
libtext-charwidth-perl : Dépend: perlapi-5.14.2
libtext-iconv-perl : Dépend: perlapi-5.14.2
libuuid-perl : Dépend: perlapi-5.14.2
libxml-parser-perl : Dépend: perlapi-5.14.2
linux-generic : Dépend: linux-image-generic (= 3.19.0.15.14) mais ne sera pas installé
Dépend: linux-headers-generic (= 3.19.0.15.14) mais ne sera pas installé
printer-driver-hpijs : Dépend: libhpmud0 (= 3.15.2-0ubuntu4) mais 3.12.2-1ubuntu3.5 devra être installé
python-apt : Dépend: libapt-inst1.5 (>= 1.0.4~) mais ne sera pas installé
Dépend: libapt-pkg4.12 (>= 1.0.9.7ubuntu4) mais 0.8.16~exp12ubuntu10.26 devra être installé
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
E: Dépendances non satisfaites. Essayez « apt-get -f install » sans paquet
(ou indiquez une solution).
DEBCHECK debNG, linux-generic
DEBCHECKLINUX debNG
=================== linux-generic purge cancelled
apt-error détecté. Veuillez ouvrir un terminal et saisir (ou copier-coller) la commande suivante :
sudo chroot "/mnt/boot-sav/sda5" apt-get -f install
Puis fermez cette fenêtre.
Purge the GRUB of sda5
cp: cannot stat ‘/mnt/boot-sav/sda5/etc/default/grub’: No such file or directory
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: You may want to run apt-get update to correct these problems
grub-pc available
E: Impossible d'obtenir le verrou /var/lib/dpkg/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire d'administration (/var/lib/dpkg/). Il est possible qu'un autre processus l'utilise.
DEBCHECK debNG, grub-pc
DEBCHECK debNG
/usr/share/boot-sav/gui-init.sh: line 66: kill: (11328) - No such process
=================== grub-pc purge cancelled
apt-error détecté. Veuillez ouvrir un terminal et saisir (ou copier-coller) la commande suivante :
sudo chroot "/mnt/boot-sav/sda5" apt-get -f install
Puis fermez cette fenêtre.
=================== Recommended repair
The default repair of the Boot-Repair utility will purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
umount: /mnt/boot-sav/sda1: not mounted
umount: /mnt/boot-sav/sda2: not mounted
chroot /mnt/boot-sav/sda5 apt-get -y --force-yes update
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Impossible de récupérer [url]http://dl.google.com/linux/chrome/deb/dists/stable/Release[/url] Impossible de trouver l'entrée « main/binary-i386/Packages » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
W: Impossible de récupérer [url]http://ppa.launchpad.net/andykimpe/freshplayerplugin-daily/dists/precise/main/source/Sources[/url] 404 Not Found
W: Impossible de récupérer [url]http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/Release[/url] Impossible de trouver l'entrée « main/source/Sources » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
Purge the GRUB of sda5
cp: cannot stat ‘/mnt/boot-sav/sda5/etc/default/grub’: No such file or directory
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: You may want to run apt-get update to correct these problems
grub-pc available
Lecture des listes de paquets...SET@_progressbar1.pulse()
Construction de l'arbre des dépendances...SET@_progressbar1.pulse()
Lecture des informations d'état...
Vous pouvez lancer « apt-get -f install » pour corriger ces problèmes :
Les paquets suivants contiennent des dépendances non satisfaites :
aptdaemon : Dépend: python3-aptdaemon (= 1.1.1+bzr982-0ubuntu3) mais ne sera pas installé
Dépend: python3-gi mais ne sera pas installé
Recommande: lintian mais ne sera pas installé
grub-pc : Dépend: grub-common (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub2-common (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub-pc-bin (= 2.02~beta2-22ubuntu1) mais ne sera pas installé
Dépend: grub-gfxpayload-lists mais ne sera pas installé
hplip : Dépend: libsane-hpaio (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: hplip-data (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
Dépend: printer-driver-hpcups (= 3.12.2-1ubuntu3.5) mais 3.15.2-0ubuntu4 devra être installé
indicator-session : Dépend: systemd-services
Recommande: indicator-applet (>= 0.2) mais ne sera pas installé ou
indicator-renderer
Recommande: unity-control-center mais ne sera pas installé ou
gnome-control-center mais ne sera pas installé
Recommande: unity-control-center-signon mais ne sera pas installé ou
gnome-control-center-signon mais il n'est pas installable
libalgorithm-diff-xs-perl : Dépend: perlapi-5.14.2
libcairo-perl : Dépend: perlapi-5.14.2
libglib-perl : Dépend: perlapi-5.14.2
libglib2.0-dev : Dépend: libpcre3-dev (>= 1:8.31) mais 8.12-4ubuntu0.2 devra être installé
libgtk2-gladexml-perl : Dépend: perlapi-5.14.2
libgtk2-perl : Dépend: perlapi-5.14.2
libhpmud0 : Dépend: libsnmp15 (>= 5.4.3~dfsg) mais ne sera pas installé
libhtml-parser-perl : Dépend: perlapi-5.14.2
libnet-dbus-perl : Dépend: perlapi-5.14.2
libnet-ssleay-perl : Dépend: perlapi-5.14.2
libpam-systemd : Dépend: systemd (= 219-7ubuntu3) mais ne sera pas installé
libpango-perl : Dépend: perlapi-5.14.2
libperl5.14 : Dépend: perl-base (= 5.14.2-6ubuntu2.5) mais 5.20.2-2 devra être installé
libpurple0 : Dépend: perlapi-5.14.2
libsocket6-perl : Dépend: perlapi-5.14.2
libtext-charwidth-perl : Dépend: perlapi-5.14.2
libtext-iconv-perl : Dépend: perlapi-5.14.2
libuuid-perl : Dépend: perlapi-5.14.2
libxml-parser-perl : Dépend: perlapi-5.14.2
printer-driver-hpijs : Dépend: libhpmud0 (= 3.15.2-0ubuntu4) mais 3.12.2-1ubuntu3.5 devra être installé
python-apt : Dépend: libapt-inst1.5 (>= 1.0.4~) mais ne sera pas installé
Dépend: libapt-pkg4.12 (>= 1.0.9.7ubuntu4) mais 0.8.16~exp12ubuntu10.26 devra être installé
W: Duplicate sources.list entry [url]http://archive.canonical.com/ubuntu/[/url] precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages)
W: Unknown Multi-Arch type 'no' for package 'compiz-core'
W: Unknown Multi-Arch type 'no' for package 'compiz-gnome'
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
E: Dépendances non satisfaites. Essayez « apt-get -f install » sans paquet
(ou indiquez une solution).
DEBCHECK debNG, grub-pc
DEBCHECK debNG
=================== grub-pc purge cancelled
apt-error détecté. Veuillez ouvrir un terminal et saisir (ou copier-coller) la commande suivante :
sudo chroot "/mnt/boot-sav/sda5" apt-get -f install
Puis fermez cette fenêtre.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will not act on the boot.
Je ne sais plus quoi faire.
Pourriez-vous m'aider ?
Merci d'avance.
Note de la modération : merci d’utiliser les balises code.
Hors ligne
#13 Le 01/05/2016, à 11:31
- maxire
Re : Probleme d'affichage du MBR
Salut,
Maintenant, c'est une catastrophe car le mbr s'affiche mais il n'y a plus de Linux.
Normal, c'est maintenant, d'après le boot-info, syslinux qui sert de programme de démarrage et par défaut syslinux lance la partition marquée d'un drapeau boot, ici celle hébergeant Windows.
Personne dans ce fil de discussion, si je ne m'abuse, n'a proposé de réaliser un boot-repair, je ne comprends pas d'ailleurs cette réparation étrange.
De plus nous ne savons toujours pas comment est connecté ce fichu écran.
Je viens récemment de faire un test avec un laptop, si sa sortie VGA est connectée à un écran éteint, le menu Grub n'apparaît pas mais l'ordinateur démarre quand même et c'est bien l'écran du laptop qui est utilisé.
Pour démarrer Linux, il devrait suffire de positionner le flag de démarrage sur la partition /dev/sda5 qui héberge Grub dans son vbr.
Pour cela démarrer avec une live-USB et utiliser l'utilitaire parted.
sudo parted -s set 5 boot on /dev/sda
Note:
Oups, pardon jamesbad00 a effectivement indirectement proposé de réaliser un boot-repair, en réalité inutile dans la mesure où le précédent boot-info ne montrait aucun problème avec Grub.
Dernière modification par maxire (Le 01/05/2016, à 11:40)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#14 Le 01/05/2016, à 11:41
- maxire
Re : Probleme d'affichage du MBR
mbr s'affiche
Qu'est-ce que cela veut dire?
Un mbr ne s'affiche pas, un menu de démarrage oui, mais lequel?
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#15 Le 01/05/2016, à 12:05
- jamesbad000
Re : Probleme d'affichage du MBR
Bonjour,
Pour démarrer Linux, il devrait suffire de positionner le flag de démarrage sur la partition /dev/sda5
Je doute que ça fonctionne car il n'y plus de grub.cfg dans sda5
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 80169512 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /etc/fstab /boot/extlinux/extlinux.conf
Maintenant on dirait que le paramétrage de ppa sur sda5 en a un coup d'en l'aile,
chroot /mnt/boot-sav/sda5 apt-get -y --force-yes update
W: Aucune clé publique n'est disponible pour la/les clé(s) suivante(s) :
1397BC53640DB551
W: Impossible de récupérer http://ppa.launchpad.net/andykimpe/fres … ce/Sources 404 Not Found
ou alors il y a un problème avec le live-cd boot-repair qui semble ancien ?
L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)
Hors ligne
#16 Le 01/05/2016, à 12:19
- Babdu89
Re : Probleme d'affichage du MBR
Bonjour.
Si on reprend depuis le début...
Pour une raison que j'ignore, je n'ai plus l'affichage du mbr au démarrage et donc ne peux plus choisir Windows ou linux.
Puis dans les boot info successifs on voit que la première partie de grub était installée à l'origine dans le secteur de boot de la partition Linux /sda5.
le MBR étant intact, la machine démarrait sur Windows et on pouvait chaîner sur Ubuntu au démarrage.
Examen du contenu des fichiers boot.ini ne permet pas de dire comment on pouvait lancer Linux. ?.
Question, comment se passait le démarrage avant la réparation faite avec Boot-repair.? c'est la réparation faite avec Boot-repair qui a écrasé le MBR avec la première partie de Grub.
Le dernier boot info (post#12) indique que Boot-Repair à été utilisé pour restaurer un mbr generic
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
Est la signature dans le secteur de boot après restauration faite par Boot-Repair...
Je pense que la réinstallation de grub avec purge étant un échec, Boot-Repair à restaurer par défaut un mbr generic pour que la machine puisse au moins redémarrer sur Windows. (mais je n'arrive pas à trouver cette réparation dans le dernier boot info).
Normalement çà devrait permettre à la machine de redémarrer directement sur Windows...
Post#1 on lit
J'ai exécuté plusieurs fois Boot-repair mais cela ne change pas le problème.
Donc c'est bien ccathy86 qui a utiliser Boot-Repair avant d'ouvrir son sujet.
Je repose la question.
Quelle était la manip à faire depuis Windows pour avoir le choix de lancer Windows ou Linux?..
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#17 Le 01/05/2016, à 12:22
- maxire
Re : Probleme d'affichage du MBR
@jamesbad000, effectivement ma proposition ne va rien réparer puis que /boot/grub/grub.cfg a disparu comme le prouve le boot-info précédent:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 80169512 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
Depuis, le nouveau Boot-info ne trouve aucun fichier /boot/grub/grub.cfg.
L'action du boot-repair a été destructrice.
Il faudrait sans doute télécharger la dernière version de boot-repair ou bien réparer via un chroot avec une live-usb.
Dernière modification par maxire (Le 01/05/2016, à 12:23)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#18 Le 01/05/2016, à 13:53
- ccathy86
Re : Probleme d'affichage du MBR
La référence de l’écran est : LG FLATRON IPS225 connecté il me semble en VGA.
J'ai fait le "sudo parted -s set 5 boot on /dev/sda" que me proposait Maxire et j'ai eu comme réponse "Erreur: Ne peut évaluer le statut du périphérique set - Aucun fichier ou dossier de ce type."
je vais vérifier si j'ai bien la dernière version de boot-repair pour un 32bits et voir si je peux utiliser une live-usb.
Merci.
Hors ligne
#19 Le 01/05/2016, à 14:05
- maxire
Re : Probleme d'affichage du MBR
Oups, je suis un peu dyslexique, la syntaxe exacte est:
sudo parted -s /dev/sda set 5 boot on
Mais comme remarqué par jamesbad000, cela ne suffira pas à réparer le démarrage.
Dernière modification par maxire (Le 01/05/2016, à 14:06)
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#20 Le 01/05/2016, à 15:53
- jamesbad000
Re : Probleme d'affichage du MBR
(...)
Puis dans les boot info successifs on voit que la première partie de grub était installée à l'origine dans le secteur de boot de la partition Linux /sda5.
le MBR étant intact, la machine démarrait sur Windows et on pouvait chaîner sur Ubuntu au démarrage.
Bonjour babdu89. Ce n'est pas tout à fait ça.
Au départ la machine démarrait sur linux sans afficher le menu grub (pas de possibilité de lancer win).
Le MBR sur sda5 est certainement le résultat de tentatives de réparation erroné avec boot-repair, mais n'a a priori joué aucun role jusque là.
Et boot-repair ne corrigeait pas le pbm.
Puis suite à des manip, non détaillées, le menu grub c'est de nouveau affiché. Mais ça ne semblait pas être revenu au standard (Et je confirme, que même si je n'ai pas compris ce qui n'allait pas dans le grub.cfg, j'ai tout de même vu des bizarreries laissant penser que les fichiers de config (etc/grub.d) n'étaient plus d'origine.) Et ccathy86 a demandé comment remettre grub au standard.
A partir de là, la fonction purge/réinstall de boot-repair a semble-t-il foiré pour réinstallé grub et a laissé un truc tout bancal avec un boot syslinux (windows compatible)...
J'imagine que le log que l'on voit ne correspondant pas au moment ou le boot sysllinux a été installé.
Dernière modification par jamesbad000 (Le 01/05/2016, à 15:56)
L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)
Hors ligne
#21 Le 01/05/2016, à 17:42
- ccathy86
Re : Probleme d'affichage du MBR
Je viens de booter boot-repair sur une live-usb. Cela n'a rien changé.
Voila le boot-info :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Recovery: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 80169512 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
Operating System: Ubuntu 12.04.5 LTS
Boot files: /etc/fstab /boot/extlinux/extlinux.conf
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.07
Boot sector info: Syslinux looks at sector 14928 of /dev/sdb1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 9,661,679 9,661,617 b W95 FAT32
/dev/sda2 * 9,661,680 77,832,191 68,170,512 7 NTFS / exFAT / HPFS
/dev/sda3 77,834,238 240,119,807 162,285,570 5 Extended
/dev/sda5 77,834,240 111,626,239 33,792,000 83 Linux
/dev/sda6 111,628,288 123,570,175 11,941,888 82 Linux swap / Solaris
/dev/sda7 167,118,848 203,253,759 36,134,912 83 Linux
/dev/sda8 123,572,224 167,116,799 43,544,576 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3910 MB, 3910041600 bytes
255 heads, 63 sectors/track, 475 cylinders, total 7636800 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 7,636,799 7,634,752 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 092D-20D2 vfat HP_RECOVERY
/dev/sda2 5A34FD5134FD311D ntfs HP_PAVILION
/dev/sda5 cf240385-b560-4b69-b088-362772878b0e ext4 LINUX
/dev/sda6 0c197043-8b84-46f4-a164-876590d004bb swap CATHY-SWAP
/dev/sda7 7dc4eb4b-7089-4370-8e45-e0bd289ea88e ext4 LINUXDATA
/dev/sda8 d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326 ext4 LINUXHOME
/dev/sdb1 5859-33C2 vfat BOOT-REPAIR
/dev/zram0 722a4186-0465-4bc6-a64d-3e9f9335a47c swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 1 2016 ata-Hewlett-Packard_DVD_Writer_300 -> ../../sr1
lrwxrwxrwx 1 root root 9 May 1 2016 ata-IDE-DVD_ROM_16x -> ../../sr0
lrwxrwxrwx 1 root root 9 May 1 15:32 ata-Maxtor_6Y120L0_Y3KQQ0HE -> ../../sda
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 1 15:33 ata-Maxtor_6Y120L0_Y3KQQ0HE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 May 1 2016 ata-Maxtor_6Y120L0_Y3KQQ0HE-part8 -> ../../sda8
lrwxrwxrwx 1 root root 9 May 1 2016 usb-EPSON_Storage_4E3941593032303694-0:0 -> ../../sdg
lrwxrwxrwx 1 root root 9 May 1 2016 usb-EPSON_Storage_4E3941593032303694-0:1 -> ../../sdh
lrwxrwxrwx 1 root root 9 May 1 2016 usb-Generic_USB_CF_Reader_9206051-0:1 -> ../../sdd
lrwxrwxrwx 1 root root 9 May 1 2016 usb-Generic_USB_MS_Reader_9206051-0:3 -> ../../sdf
lrwxrwxrwx 1 root root 9 May 1 2016 usb-Generic_USB_SD_Reader_9206051-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 May 1 2016 usb-Generic_USB_SM_Reader_9206051-0:2 -> ../../sde
lrwxrwxrwx 1 root root 9 May 1 15:32 usb-_USB_DISK_2.0_0701C219655B63A7-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 1 2016 usb-_USB_DISK_2.0_0701C219655B63A7-0:0-part1 -> ../../sdb1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=0
default=C:\CMDCONS\BOOTSECT.DAT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
--------------------------------------------------------------------------------
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=20
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptIn
C:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /cmdcons
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
#Entry for /dev/sda5 :
LABEL=LINUX / ext4 errors=remount-ro 0 1
#Entry for /dev/sda7 :
LABEL=LINUXDATA /media/LINUXDATA ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda8 :
LABEL=LINUXHOME /home ext4 rw,nosuid,nodev,uhelper=hal 0 0
#Entry for /dev/sda6 :
LABEL=CATHY-SWAP none swap sw 0 0
#UUID=7dc4eb4b-7089-4370-8e45-e0bd289ea88e /boot ext4 defaults 0 2
#UUID=7dc4eb4b-7089-4370-8e45-e0bd289ea88e /boot ext4 defaults 0 2
--------------------------------------------------------------------------------
====================== sda5/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
============== sda5: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 c6 e6 ee 31 24 cb 9d 91 9e b9 ae 37 54 d5 ae 75 |...1$......7T..u|
00000010 47 8b 79 75 80 0c 6d 27 19 af 9e 51 92 f5 39 aa |G.yu..m'...Q..9.|
00000020 cf da 4a f2 2b da e9 90 dd 15 94 5c 08 84 7c b2 |..J.+......\..|.|
00000030 a9 f5 f5 ad 3b cd 4a db 4f 80 da a4 60 b1 1d 72 |....;.J.O...`..r|
00000040 08 fa d7 4c 94 9b 52 7d 4e 7a 95 12 4d 1c 25 c5 |...L..R}Nz..M.%.|
00000050 d5 d5 e5 c3 40 51 9e 3e a5 e3 38 1c f7 fc 2a 92 |....@Q.>..8...*.|
00000060 cb 71 67 2a 2d ab b3 39 63 86 27 3c 57 a9 69 4a |.qg*-..9c.'<W.iJ|
00000070 aa 4c f2 e8 4e 53 ae e5 d3 a9 d6 e8 9a 9c 8c 23 |.L..NS.........#|
00000080 8a e2 7c 4c f2 64 31 1c 9f 6a f4 13 0c 77 01 46 |..|L.d1..j...w.F|
00000090 ef 30 f5 e7 8c 52 8c 54 64 db eb b1 e9 4e ad a4 |.0...R.Td....N..|
000000a0 d4 77 44 2f a6 ae e0 46 54 7a fa d2 ad bb 42 7e |.wD/...FTz....B~|
000000b0 f1 31 9f 53 c0 ae ba 7a ae 56 72 54 bd 38 7b 47 |.1.S...z.VrT.8{G|
000000c0 bf f5 72 cc 6f 0c 13 36 d7 de 71 d4 56 a5 bd cc |..r.o..6..q.V...|
000000d0 53 ac b1 33 7e f0 60 85 ee 6b 7b 7e f2 ec f2 2b |S..3~.`..k{~...+|
000000e0 42 6a cd 6c cc 9b cb 38 27 05 92 32 26 cf 24 9e |Bj.l...8'..2&.$.|
000000f0 2a a3 e8 8f 1c 0d 73 1d d9 23 20 14 c7 2a 7d 6b |*.....s..# ..*}k|
00000100 77 68 36 fb 9e d4 79 94 94 66 f6 18 52 e5 cc 7b |wh6...y..f..R..{|
00000110 98 ef e1 77 7a 8a d5 1e 1b be bc 56 1e 4b 2c 7d |...wz......V.K,}|
00000120 ce 71 4a 49 28 1c 75 a3 2f 6b ed 23 b1 5a 7d 2e |.qJI(.u./k.#.Z}.|
00000130 0d 39 a2 17 23 6c 8a c1 94 b1 e4 9a d1 96 ee d6 |.9..#l..........|
00000140 60 db 23 c0 3d 4a f4 6f 5c d7 1c 23 2a b3 74 de |`.#.=J.o\..#*.t.|
00000150 da 9d 15 1c 55 2f 6c b7 47 2f ae 41 3d b5 cc 1b |....U/l.G/.A=...|
00000160 03 f9 2e 81 cb 64 ed 15 77 4a 0c 57 28 d8 72 7e |.....d..wJ.W(.r~|
00000170 6e 7a d7 6d 36 e9 45 41 9e 24 a1 2c 44 1c fe 67 |nz.m6.EA.$.,D..g|
00000180 5a 2d 52 68 c7 98 06 3b 83 de b9 8d 4a db ec 6f |Z-Rh...;....J..o|
00000190 e6 46 9f b9 27 1f 8d 15 5b 72 51 4c d6 12 8c 2b |.F..'...[rQL...+|
000001a0 59 ec c9 2c ae 5b f7 61 9b 30 ee c9 3d eb a6 b3 |Y..,.[.a.0..=...|
000001b0 b9 b6 99 ca 6d 18 cf 04 f7 ab 5c d1 a8 f9 00 ef |....m.....\.....|
000001c0 ff ff 83 ef ff ff 02 00 00 00 00 a0 03 02 00 ef |................|
000001d0 ff ff 05 ef ff ff 02 a0 03 02 00 40 b6 00 00 00 |...........@....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdc sdd sde sdf sdg sdh
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/16609/mounts) leaked on lvs invocation. Parent PID 24265: bash
File descriptor 63 (pipe:[78533]) leaked on lvs invocation. Parent PID 24265: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2016-05-01__15h32 ===================
boot-info version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/16609/mounts) leaked on lvs invocation. Parent PID 18118: /bin/sh
No volume groups found
boot-info is executed in live-session (Boot-Repair-Disk 32bit 29nov2014, trusty, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit
file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
=================== os-prober:
/dev/sda1:Windows NT/2000/XP:Windows:chain
/dev/sda2:Microsoft Windows XP Home Edition:Windows1:chain
/dev/sda5:Ubuntu 12.04.5 LTS (12.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="HP_RECOVERY" UUID="092D-20D2" TYPE="vfat"
/dev/sda2: LABEL="HP_PAVILION" UUID="5A34FD5134FD311D" TYPE="ntfs"
/dev/sda5: LABEL="LINUX" UUID="cf240385-b560-4b69-b088-362772878b0e" TYPE="ext4"
/dev/sda6: LABEL="CATHY-SWAP" UUID="0c197043-8b84-46f4-a164-876590d004bb" TYPE="swap"
/dev/sda7: LABEL="LINUXDATA" UUID="7dc4eb4b-7089-4370-8e45-e0bd289ea88e" TYPE="ext4"
/dev/sda8: LABEL="LINUXHOME" UUID="d78fc953-3dfd-4d3f-a4f3-c6ae24c4b326" TYPE="ext4"
/dev/sdb1: LABEL="BOOT-REPAIR" UUID="5859-33C2" TYPE="vfat"
/dev/zram0: UUID="722a4186-0465-4bc6-a64d-3e9f9335a47c" TYPE="swap"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, NTLDR, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, ntldr, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sda5.
sda7 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda8 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda8.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes
=================== parted -l:
Model: ATA Maxtor 6Y120L0 (scsi)
Disk /dev/sda: 123GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 4947MB 4947MB primary fat32
2 4947MB 39.9GB 34.9GB primary ntfs boot
3 39.9GB 123GB 83.1GB extended
5 39.9GB 57.2GB 17.3GB logical ext4
6 57.2GB 63.3GB 6114MB logical linux-swap(v1)
8 63.3GB 85.6GB 22.3GB logical ext4
7 85.6GB 104GB 18.5GB logical ext4
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 3910MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 3910MB 3909MB primary fat32 boot, lba
Error: /dev/zram0: unrecognised disk label
=================== parted -lm:
BYT;
/dev/sda:123GB:scsi:512:512:msdos:ATA Maxtor 6Y120L0;
1:32.3kB:4947MB:4947MB:fat32::;
2:4947MB:39.9GB:34.9GB:ntfs::boot;
3:39.9GB:123GB:83.1GB:::;
5:39.9GB:57.2GB:17.3GB:ext4::;
6:57.2GB:63.3GB:6114MB:linux-swap(v1)::;
8:63.3GB:85.6GB:22.3GB:ext4::;
7:85.6GB:104GB:18.5GB:ext4::;
BYT;
/dev/sdb:3910MB:scsi:512:512:msdos: USB DISK 2.0;
1:1049kB:3910MB:3909MB:fat32::boot, lba;
Error: /dev/zram0: unrecognised disk label
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
/dev/sda7 on /mnt/boot-sav/sda7 type ext4 (rw)
/dev/sda8 on /mnt/boot-sav/sda8 type ext4 (rw)
=================== ls:
/sys/block/fd0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdg (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdh (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdb1 sdc sdd sde sdf sdg sdh sg0 sg1 sg2 sg3 sg4 sg5 sg6 sg7 sg8 sg9 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 e9 a9 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 3f 00 00 00 |........?...?...|
00000020 aa 6c 93 00 c9 24 00 00 00 00 00 00 02 00 00 00 |.l...$..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 d2 20 2d 09 20 20 20 20 20 20 20 20 20 |..). -. |
00000050 20 20 46 41 54 33 32 20 20 20 66 c1 e0 02 8b d0 | FAT32 f.....|
00000060 81 e2 ff 01 66 c1 e8 09 66 3b 46 f8 74 2a 66 89 |....f...f;F.t*f.|
00000070 46 f8 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f |F.f.F.f..^(...t.|
00000080 3a 5e 10 0f 83 8d 00 66 0f af 5e 24 66 03 c3 bb |:^.....f..^$f...|
00000090 e0 07 b9 01 00 e8 d2 00 8b da 66 8b 87 00 7e 66 |..........f...~f|
000000a0 25 ff ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 |%....f=.....3...|
000000b0 8e c1 8e d1 bc f4 7b bd 00 7c 66 0f b6 46 10 66 |......{..|f..F.f|
000000c0 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 f4 |.f$f..V.f.V.f.V.|
000000d0 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff 66 |f..f.F.f.F.....f|
000000e0 8b 46 2c 66 50 e8 a4 00 bb 70 00 b9 01 00 e8 79 |.F,fP....p.....y|
000000f0 00 bf 00 07 b1 0b be 9d 7d f3 a6 74 2a 03 f9 83 |........}..t*...|
00000100 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 e8 |......r.f@Ju.fX.|
00000110 48 ff 72 cf be a8 7d ac 84 c0 74 09 b4 0e bb 07 |H.r...}...t.....|
00000120 00 cd 10 eb f2 cd 18 66 58 ff 75 09 ff 75 0f 66 |.......fX.u..u.f|
00000130 58 66 83 f8 02 72 dd 66 3d f8 ff ff 0f 73 d5 66 |Xf...r.f=....s.f|
00000140 50 e8 48 00 3e 8b 9e 68 01 32 ed 8a 4e 0d e8 19 |P.H.>..h.2..N...|
00000150 00 c1 e1 05 3e 01 8e 68 01 66 58 e8 fc fe 72 d1 |....>..h.fX...r.|
00000160 8a 56 40 ea 00 00 00 20 00 20 66 60 66 6a 00 66 |.V@.... . f`fj.f|
00000170 50 53 6a 00 51 6a 10 8b f4 b8 00 42 8a 56 40 cd |PSj.Qj.....B.V@.|
00000180 13 83 c4 10 be c0 7d 72 8e 66 61 c3 66 48 66 48 |......}r.fa.fHfH|
00000190 66 0f b6 56 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c |f..V.f..f.F..NTL|
000001a0 44 52 20 20 20 20 20 20 0d 0a 49 6e 76 61 6c 69 |DR ..Invali|
000001b0 64 20 53 79 73 74 65 6d 20 44 69 73 6b 20 6f 72 |d System Disk or|
000001c0 0d 0a 44 69 73 6b 20 49 2f 4f 20 65 72 72 6f 72 |..Disk I/O error|
000001d0 0d 0a 50 72 65 73 73 20 61 20 6b 65 79 20 74 6f |..Press a key to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 f0 00 f0 6c 93 00 |........?....l..|
00000020 00 00 00 00 80 00 80 00 08 33 10 04 00 00 00 00 |.........3......|
00000030 00 00 0c 00 00 00 00 00 44 93 65 00 00 00 00 00 |........D.e.....|
00000040 f6 00 00 00 01 00 00 00 1d 31 fd 34 51 fd 34 5a |.........1.4Q.4Z|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 501M 14M 488M 3% /
udev devtmpfs 488M 12K 488M 1% /dev
tmpfs tmpfs 101M 1.1M 100M 2% /run
/dev/sdb1 vfat 3.7G 599M 3.1G 17% /cdrom
/dev/loop0 squashfs 543M 543M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 501M 632K 501M 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 501M 0 501M 0% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda1 vfat 4.6G 4.2G 453M 91% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 33G 22G 11G 68% /mnt/boot-sav/sda2
/dev/sda5 ext4 16G 5.8G 9.2G 39% /mnt/boot-sav/sda5
/dev/sda7 ext4 17G 192M 16G 2% /mnt/boot-sav/sda7
/dev/sda8 ext4 21G 7.3G 12G 38% /mnt/boot-sav/sda8
=================== fdisk -l:
Disk /dev/sda: 122.9 GB, 122942324736 bytes
240 heads, 63 sectors/track, 15881 cylinders, total 240121728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5e7ceee9
Device Boot Start End Blocks Id System
/dev/sda1 63 9661679 4830808+ b W95 FAT32
/dev/sda2 * 9661680 77832191 34085256 7 HPFS/NTFS/exFAT
/dev/sda3 77834238 240119807 81142785 5 Extended
/dev/sda5 77834240 111626239 16896000 83 Linux
/dev/sda6 111628288 123570175 5970944 82 Linux swap / Solaris
/dev/sda7 167118848 203253759 18067456 83 Linux
/dev/sda8 123572224 167116799 21772288 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 3910 MB, 3910041600 bytes
255 heads, 63 sectors/track, 475 cylinders, total 7636800 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x001f3cc3
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 7636799 3817376 c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will not act on the boot.
Avez-vous d'autres solutions ?
Merci d'avance.
Dernière modification par Shanx (Le 24/05/2016, à 09:42)
Hors ligne
#22 Le 01/05/2016, à 17:51
- cqfd93
Re : Probleme d'affichage du MBR
Bonjour,
Merci de mettre le contenu du message 21 entre balises code (explications ici)
− cqfd93 −
Hors ligne
#23 Le 01/05/2016, à 18:06
- Babdu89
Re : Probleme d'affichage du MBR
Bonsoir.
ccathy86 a écrit;
Je viens de booter boot-repair sur une live-usb. Cela n'a rien changé.
Oui, puisque tu n'as pas fait de réparation.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will not act on the boot.
Stp, veux tu bien arrêter l'utilisation de Boot-Repair pour le moment. Merci.
@jamesbad000
Post#1 on lit;
Pour une raison que j'ignore,je n'ai plus l'affichage du mbr au démarrage et donc ne peux plus choisir Windows ou linux. et donc ne peux plus choisir Windows ou linux.
Pour une raison que j'ignore, je n'ai plus l'affichage du mbr au démarrage
On parle d'affichage du mbr, et pas de grub.
Et vu que Grub première partie est dans le secteur de boot de la partition Linux /sda5. C'est ce qui me faisait avancer, que la machine démarrait sur Windows, pour chaîner ensuite sur Linux, avant les soucis d'écran et la première réparation. Bon, je peux me tromper...
Au sujet de ce Linux, on ne sait pas de quelle distribution il s'agit. Avez vous remarqué la composition du fichier fstab. Çà ne ressemble pas à ce que l'on voit dans Ubuntu.
C'est du bricolage, ou quoi?.
Ce qui est bizarre, c'est que même une réparation faite depuis Boot-Repair installé dans le Linux (premier boot info http://paste.ubuntu.com/16010606/ ), çà ne marche pas.
Quand à cette histoire d'écran... La session installée pour faire le boot info marche. Les sessions live pour faire les boot info suivants, marchaient sans souci d'écran?.
@ccathy86 ;
Comment démarraient de deux systèmes avant les soucis et les premières réparations ?.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#24 Le 01/05/2016, à 18:31
- jamesbad000
Re : Probleme d'affichage du MBR
On parle d'affichage du mbr, et pas de grub.
Bah, a part un menu grub, tu m'expliquera ce que ça peut vouloir dire "affichage du mbr au démarrage", pour choisir entre windows et linux. A moins qu'il s'agisse de l'affichage du contenu du secteur 0 du disque en hexadecimal
Au dela de ça. La distribution installé est, d'après boot-repair, Ubuntu 12.04.5 LTS 32 bits.
et celle de boot repair (Pour les 2 dernier boot info)
boot-info version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)
Hors ligne
#25 Le 01/05/2016, à 18:32
- ccathy86
Re : Probleme d'affichage du MBR
Avant mon changement d'écran, j'avais un menu sur fond mauve pour choisir linux ou windows (il y avait d'ailleurs 2 choix pour chaque si je me souviens bien).
La réparation étant apparemment très compliquée, je pense que je vais faire une réinstallation d'ubuntu 12.04 puisque c'est la dernière version que ma carte graphique semble pouvoir supporter.
Je vais utiliser clonezilla pour récupérer mes fichiers et Ubuntuinstaller.
N'est-ce pas la meilleure solution ?
Hors ligne