[Résolu] Carte wifi Realtek RTL 8187b non détecté

Snaypse · Le 07/11/2008, à 00:13

Bonjours tous le monde, je viens de passer a GNU/Linux Ubuntu 8.10, j'ensuit a mes débuts dans le monde du libre et j'ai un problème avec ma carte wifi rtl 8187b, j'ai lu et testé a peut pret tous les topics/tuto et rien ne marche, Ubuntu ne détecte jamais ma carte meme avec les pilotes installer.

voici les résultats obtenue avec :
lsusb

Bus 007 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 174f:6a51 Syntek 2.0MPixel Web Cam - Asus Z96J, Z96S, S96S
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lspci

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GS (rev a1)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
06:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
06:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
06:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

ifconfig

eth0      Link encap:Ethernet  HWaddr 00:1e:8c:32:d9:de  
          inet addr:192.168.30.10  Bcast:192.168.30.255  Mask:255.255.255.0
          inet6 addr: fe80::21e:8cff:fe32:d9de/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8695 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8463 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:10503446 (10.5 MB)  TX bytes:1037009 (1.0 MB)
          Interrupt:18 Base address:0x400 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:242 errors:0 dropped:0 overruns:0 frame:0
          TX packets:242 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:15140 (15.1 KB)  TX bytes:15140 (15.1 KB)

quelqu'un pourai m'aider ?
ps: Je voudrais essayer cette manip mais je n'ai pas su comment m'y prendre.
merci d'avance

Dernière modification par Snaypse (Le 13/11/2008, à 11:39)

preterax · Le 07/11/2008, à 00:30

Le module est bien chargé?
Tu devrais poster ton dmesg.

Snaypse · Le 07/11/2008, à 00:48

quesque vous voulez dire par si le module est chargé?
dmesg

[    0.589497] pci 0000:00:1e.0: transparent bridge
[    0.589501] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[    0.589506] PCI: bridge 0000:00:1e.0 32bit mmio: [fbf00000, fbffffff]
[    0.589539] bus 00 -> node 0
[    0.589548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.589858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.590039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.590184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.590329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.644327] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.644375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.644551] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.644726] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.644900] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.645077] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.645251] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.645426] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.645516] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.645516] pnp: PnP ACPI init
[    0.645516] ACPI: bus type pnp registered
[    0.648673] pnp: PnP ACPI: found 13 devices
[    0.648673] ACPI: ACPI bus type pnp unregistered
[    0.648673] PnPBIOS: Disabled by ACPI PNP
[    0.652058] PCI: Using ACPI for IRQ routing
[    0.656042] NET: Registered protocol family 8
[    0.656045] NET: Registered protocol family 20
[    0.656069] NetLabel: Initializing
[    0.656069] NetLabel:  domain hash size = 128
[    0.656069] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.656069] NetLabel:  unlabeled traffic allowed by default
[    0.656076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.656082] hpet0: 3 64-bit timers, 14318180 Hz
[    0.657641] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.657644]    actual entries 65620
[    0.657763] AppArmor: AppArmor Filesystem Enabled
[    0.657787] ACPI: RTC can wake from S4
[    0.660041] Switched to high resolution mode on CPU 0
[    0.660474] Switched to high resolution mode on CPU 1
[    0.664034] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.664049] system 00:08: ioport range 0x25c-0x25f has been reserved
[    0.664053] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.664057] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.664060] system 00:08: ioport range 0x500-0x53f has been reserved
[    0.664064] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.664068] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.664071] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.664075] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.664078] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.664087] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.664090] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.664097] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.664105] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.664108] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.664112] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.664115] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
[    0.699317] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.699322] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.699327] pci 0000:00:01.0:   MEM window: 0xf4000000-0xf7ffffff
[    0.699332] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.699338] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.699340] pci 0000:00:1c.0:   IO window: disabled
[    0.699346] pci 0000:00:1c.0:   MEM window: disabled
[    0.699351] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.699358] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.699361] pci 0000:00:1c.1:   IO window: disabled
[    0.699366] pci 0000:00:1c.1:   MEM window: disabled
[    0.699371] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.699379] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.699382] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
[    0.699389] pci 0000:00:1c.2:   MEM window: 0xf8000000-0xfbefffff
[    0.699394] pci 0000:00:1c.2:   PREFETCH window: 0x000000dc000000-0x000000dfffffff
[    0.699403] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.699406] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.699413] pci 0000:00:1e.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.699418] pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
[    0.699439] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.699444] pci 0000:00:01.0: setting latency timer to 64
[    0.699454] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.699459] pci 0000:00:1c.0: setting latency timer to 64
[    0.699469] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.699474] pci 0000:00:1c.1: setting latency timer to 64
[    0.699483] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.699488] pci 0000:00:1c.2: setting latency timer to 64
[    0.699496] pci 0000:00:1e.0: setting latency timer to 64
[    0.699501] bus: 00 index 0 io port: [0, ffff]
[    0.699503] bus: 00 index 1 mmio: [0, ffffffff]
[    0.699506] bus: 01 index 0 io port: [c000, cfff]
[    0.699508] bus: 01 index 1 mmio: [f4000000, f7ffffff]
[    0.699511] bus: 01 index 2 mmio: [c0000000, cfffffff]
[    0.699513] bus: 01 index 3 mmio: [0, 0]
[    0.699515] bus: 05 index 0 mmio: [0, 0]
[    0.699517] bus: 05 index 1 mmio: [0, 0]
[    0.699520] bus: 05 index 2 mmio: [0, 0]
[    0.699522] bus: 05 index 3 mmio: [0, 0]
[    0.699524] bus: 04 index 0 mmio: [0, 0]
[    0.699526] bus: 04 index 1 mmio: [0, 0]
[    0.699529] bus: 04 index 2 mmio: [0, 0]
[    0.699531] bus: 04 index 3 mmio: [0, 0]
[    0.699533] bus: 02 index 0 io port: [d000, dfff]
[    0.699535] bus: 02 index 1 mmio: [f8000000, fbefffff]
[    0.699538] bus: 02 index 2 mmio: [dc000000, dfffffff]
[    0.699540] bus: 02 index 3 mmio: [0, 0]
[    0.699543] bus: 06 index 0 io port: [e000, efff]
[    0.699545] bus: 06 index 1 mmio: [fbf00000, fbffffff]
[    0.699547] bus: 06 index 2 mmio: [d0000000, d00fffff]
[    0.699550] bus: 06 index 3 io port: [0, ffff]
[    0.699552] bus: 06 index 4 mmio: [0, ffffffff]
[    0.699562] NET: Registered protocol family 2
[    0.712059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.712345] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.712853] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.713211] TCP: Hash tables configured (established 131072 bind 65536)
[    0.713216] TCP reno registered
[    0.720115] NET: Registered protocol family 1
[    0.720254] checking if image is initramfs... it is
[    1.513262] Freeing initrd memory: 7990k freed
[    1.514536] audit: initializing netlink socket (disabled)
[    1.514562] type=2000 audit(1226009371.512:1): initialized
[    1.521378] highmem bounce pool size: 64 pages
[    1.521384] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.524053] VFS: Disk quotas dquot_6.5.1
[    1.524154] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.524266] msgmni has been set to 1725
[    1.524408] io scheduler noop registered
[    1.524412] io scheduler anticipatory registered
[    1.524415] io scheduler deadline registered
[    1.524429] io scheduler cfq registered (default)
[    1.524579] pci 0000:01:00.0: Boot video device
[    1.524722] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.524771] pcieport-driver 0000:00:01.0: found MSI capability
[    1.524810] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.524861] pci_express 0000:00:01.0:pcie02: allocate port service
[    1.524906] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.525017] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.525059] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.525100] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.525145] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.525188] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.525290] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.525332] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.525373] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.525420] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.525463] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.525567] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.525608] pcieport-driver 0000:00:1c.2: found MSI capability
[    1.525650] pci_express 0000:00:1c.2:pcie00: allocate port service
[    1.525692] pci_express 0000:00:1c.2:pcie02: allocate port service
[    1.525736] pci_express 0000:00:1c.2:pcie03: allocate port service
[    1.526110] isapnp: Scanning for PnP cards...
[    1.879303] isapnp: No Plug & Play device found
[    1.917250] hpet_resources: 0xfed00000 is busy
[    1.917354] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.919825] brd: module loaded
[    1.919904] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.920046] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.922248] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.923350] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.923357] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.923360] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.923363] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.923366] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.924138] mice: PS/2 mouse device common for all mice
[    1.924302] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.924328] rtc0: alarms up to one month, y3k, hpet irqs
[    1.924478] EISA: Probing bus 0 at eisa.0
[    1.924510] EISA: Detected 0 cards.
[    1.924513] cpuidle: using governor ladder
[    1.924516] cpuidle: using governor menu
[    1.925108] TCP cubic registered
[    1.925141] Using IPI No-Shortcut mode
[    1.925359] registered taskstats version 1
[    1.925515]   Magic number: 0:432:198
[    1.925558] tty ttypd: hash matches
[    1.925652] rtc_cmos 00:03: setting system clock to 2008-11-06 22:09:33 UTC (1226009373)
[    1.925655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.925658] EDD information not available.
[    1.925909] Freeing unused kernel memory: 424k freed
[    1.925951] Write protecting the kernel text: 2576k
[    1.925981] Write protecting the kernel read-only data: 936k
[    1.956385] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.057040] fuse init (API version 7.9)
[    2.101508] ACPI: SSDT BFF9E0B0, 08FE (r1    AMI   CPU1PM        1 INTL 20060113)
[    2.102309] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.102381] processor ACPI0007:00: registered as cooling_device0
[    2.102705] ACPI: SSDT BFF9E9B0, 0120 (r1    AMI   CPU2PM        1 INTL 20060113)
[    2.103512] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.103569] processor ACPI0007:01: registered as cooling_device1
[    2.113004] Marking TSC unstable due to TSC halts in idle
[    2.121426] thermal LNXTHERM:01: registered as thermal_zone0
[    2.123457] ACPI: Thermal Zone [TZ00] (53 C)
[    2.705187] usbcore: registered new interface driver usbfs
[    2.705218] usbcore: registered new interface driver hub
[    2.715486] usbcore: registered new device driver usb
[    2.798080] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.798102] r8169 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.798449] eth0: RTL8169sc/8110sc at 0xf8850400, 00:1e:8c:32:d9:de, XID 18000000 IRQ 18
[    2.837384] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.837400] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.837405] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.837477] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.841387] ehci_hcd 0000:00:1a.7: debug port 1
[    2.841395] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.841410] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00
[    2.857029] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.857201] usb usb1: configuration #1 chosen from 1 choice
[    2.857234] hub 1-0:1.0: USB hub found
[    2.857244] hub 1-0:1.0: 4 ports detected
[    2.857569] No dock devices found.
[    2.894142] SCSI subsystem initialized
[    2.976015] USB Universal Host Controller Interface driver v3.0
[    2.995875] libata version 3.00 loaded.
[    3.110773] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.110787] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.110791] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.110842] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    3.110882] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[    3.111060] usb usb2: configuration #1 chosen from 1 choice
[    3.111100] hub 2-0:1.0: USB hub found
[    3.111110] hub 2-0:1.0: 2 ports detected
[    3.216339] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.216352] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.216356] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.216392] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    3.216428] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00
[    3.216551] usb usb3: configuration #1 chosen from 1 choice
[    3.216588] hub 3-0:1.0: USB hub found
[    3.216596] hub 3-0:1.0: 2 ports detected
[    3.224027] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    3.360844] usb 1-4: configuration #1 chosen from 1 choice
[    3.420353] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.420372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.420376] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.420417] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    3.424329] ehci_hcd 0000:00:1d.7: debug port 1
[    3.424336] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.424353] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800
[    3.441020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.441141] usb usb4: configuration #1 chosen from 1 choice
[    3.441173] hub 4-0:1.0: USB hub found
[    3.441183] hub 4-0:1.0: 6 ports detected
[    3.648782] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.648793] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.648798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.648838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    3.648866] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[    3.648987] usb usb5: configuration #1 chosen from 1 choice
[    3.649018] hub 5-0:1.0: USB hub found
[    3.649027] hub 5-0:1.0: 2 ports detected
[    3.752686] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.752696] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.752701] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.752741] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    3.752776] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[    3.752893] usb usb6: configuration #1 chosen from 1 choice
[    3.752924] hub 6-0:1.0: USB hub found
[    3.752932] hub 6-0:1.0: 2 ports detected
[    3.856744] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.856754] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.856758] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.856794] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    3.856822] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[    3.856939] usb usb7: configuration #1 chosen from 1 choice
[    3.856970] hub 7-0:1.0: USB hub found
[    3.856979] hub 7-0:1.0: 2 ports detected
[    3.872049] usb 4-6: new high speed USB device using ehci_hcd and address 3
[    4.064842] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.064847] ata_piix 0000:00:1f.1: version 2.12
[    4.064860] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.064913] ata_piix 0000:00:1f.1: setting latency timer to 64
[    4.065883] scsi0 : ata_piix
[    4.066013] scsi1 : ata_piix
[    4.067696] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    4.067699] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    4.094166] usb 4-6: configuration #1 chosen from 1 choice
[    4.117586] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fbffe800-fbffefff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.204048] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    4.450013] usb 7-1: configuration #1 chosen from 1 choice
[    4.480318] ata1.01: ATAPI: SlimtypeDVD A  DS8A1P, CX12, max UDMA/33
[    4.520324] ata1.01: configured for UDMA/33
[    4.520372] ata2: port disabled. ignoring.
[    4.522711] scsi 0:0:1:0: CD-ROM            Slimtype DVD A  DS8A1P    CX12 PQ: 0 ANSI: 5
[    4.522829] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    4.522834] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.676046] ata_piix 0000:00:1f.2: setting latency timer to 64
[    4.680020] scsi2 : ata_piix
[    4.680379] scsi3 : ata_piix
[    4.683576] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18
[    4.683582] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18
[    5.156105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.167077] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7
[    5.167081] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.182079] ata3.00: configured for UDMA/133
[    5.392622] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[008c1e00e39c0e00]
[    5.510882] ata4: SATA link down (SStatus 0 SControl 0)
[    5.511031] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
[    5.534341] scsi 0:0:1:0: Attached scsi generic sg0 type 5
[    5.534550] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    5.550216] Driver 'sr' needs updating - please use bus_type methods
[    5.563297] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.563304] Uniform CD-ROM driver Revision: 3.20
[    5.563357] Driver 'sd' needs updating - please use bus_type methods
[    5.563429] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    5.563543] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.563565] sd 2:0:0:0: [sda] Write Protect is off
[    5.563568] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.566562] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.566680] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.566706] sd 2:0:0:0: [sda] Write Protect is off
[    5.566709] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.566755] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.566760]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    6.208317] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.554305] PM: Starting manual resume from disk
[    6.554310] PM: Resume from partition 8:6
[    6.554312] PM: Checking hibernation image.
[    6.554527] PM: Resume from disk failed.
[    6.600024] kjournald starting.  Commit interval 5 seconds
[    6.600039] EXT3-fs: mounted filesystem with ordered data mode.
[   12.461165] udevd version 124 started
[   12.878498] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.952301] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.070650] Linux agpgart interface v0.103
[   13.155760] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   13.176046] ACPI: Power Button (FF) [PWRF]
[   13.176231] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   13.177784] ACPI: Lid Switch [LID]
[   13.177872] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   13.208032] ACPI: Sleep Button (CM) [SLPB]
[   13.208162] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   13.240034] ACPI: Power Button (CM) [PWRB]
[   13.299054] asus-laptop: Asus Laptop Support version 0.42
[   13.301902] asus-laptop: Error calling BSTS
[   13.301997] asus-laptop:   Z96S model detected
[   13.312592] Registered led device: asus::mail
[   13.390259] ACPI: AC Adapter [AC0] (on-line)
[   13.450733] ACPI: Battery Slot [BAT0] (battery absent)
[   13.542756] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input6
[   13.573050] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   13.821941] Bluetooth: Core ver 2.13
[   13.831321] NET: Registered protocol family 31
[   13.831324] Bluetooth: HCI device and connection manager initialized
[   13.831329] Bluetooth: HCI socket layer initialized
[   13.898374] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   13.898877] usbcore: registered new interface driver btusb
[   13.951483] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   14.099813] iTCO_vendor_support: vendor-support=0
[   14.111571] ricoh-mmc: Ricoh MMC Controller disabling driver
[   14.111575] ricoh-mmc: Copyright(c) Philip Langdale
[   14.142618] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 12)
[   14.142647] ricoh-mmc: Controller is now disabled.
[   14.151619] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   14.152357] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   14.152378] iTCO_wdt: No card detected
[   14.154409] sdhci: Secure Digital Host Controller Interface driver
[   14.154412] sdhci: Copyright(c) Pierre Ossman
[   14.241245] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)
[   14.241263] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.244314] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO
[   14.253052] usb 1-4: reset high speed USB device using ehci_hcd and address 2
[   14.333578] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   14.454005] ndiswrapper: driver net8187b (Realtek Semiconductor Corp.,06/25/2008,5.1135.0625.2008) loaded
[   14.696030] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   14.696067] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.726961] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   15.106657] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   15.147874] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   18.160449] wlan0: ethernet device 00:15:af:cc:d7:d4 using NDIS driver: net8187b, version: 0x1, NDIS version: 0x500, vendor: 'Realtek RTL8187 Wireless LAN USB NIC                                     ', 0BDA:8189.F.conf
[   18.160483] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   18.163770] usbcore: registered new interface driver ndiswrapper
[   18.533763] lp: driver loaded but no devices found
[   18.729405] Adding 2045944k swap on /dev/sda6.  Priority:-1 extents:1 across:2045944k
[   19.280061] EXT3 FS on sda7, internal journal
[   20.383597] type=1505 audit(1226005792.044:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4358
[   20.574477] type=1505 audit(1226005792.235:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4363
[   20.574719] type=1505 audit(1226005792.235:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4363
[   20.750861] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.359361] ACPI: WMI: Mapper loaded
[   22.362093] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   22.410201] apm: BIOS not found.
[   22.589092] ppdev: user-space parallel port driver
[   24.277569] Bluetooth: L2CAP ver 2.11
[   24.277584] Bluetooth: L2CAP socket layer initialized
[   24.358831] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.358847] Bluetooth: BNEP filters: protocol multicast
[   24.441126] Bridge firewalling registered
[   24.441434] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   24.467829] Bluetooth: RFCOMM socket layer initialized
[   24.470093] Bluetooth: RFCOMM TTY layer initialized
[   24.470110] Bluetooth: RFCOMM ver 1.10
[   24.475935] Bluetooth: SCO (Voice Link) ver 0.6
[   24.475950] Bluetooth: SCO socket layer initialized
[   26.349828] mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary
[   27.514111] usb 1-4: USB disconnect, address 2
[   28.166249] ndiswrapper: device wlan0 removed
[   28.685408] r8169: eth0: link up
[   28.900150] NET: Registered protocol family 17
[   55.387713] CPU0 attaching NULL sched-domain.
[   55.387732] CPU1 attaching NULL sched-domain.
[   55.397928] CPU0 attaching sched-domain:
[   55.397942]  domain 0: span 0-1 level MC
[   55.397949]   groups: 0 1
[   55.397963] CPU1 attaching sched-domain:
[   55.397969]  domain 0: span 0-1 level MC
[   55.397974]   groups: 1 0
[   93.787632] NET: Registered protocol family 10
[   93.788969] lo: Disabled Privacy Extensions
[  104.368037] eth0: no IPv6 routers present
[  122.685787] type=1503 audit(1226005899.291:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5909/net/" pid=5909 profile="/usr/sbin/cupsd"
[  123.761070] type=1503 audit(1226005900.368:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5913/net/" pid=5913 profile="/usr/sbin/cupsd"
[  123.761146] type=1503 audit(1226005900.368:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761163] type=1503 audit(1226005900.368:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761178] type=1503 audit(1226005900.368:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761193] type=1503 audit(1226005900.368:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761212] type=1503 audit(1226005900.368:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761226] type=1503 audit(1226005900.368:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761240] type=1503 audit(1226005900.368:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[  123.761259] type=1503 audit(1226005900.368:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5913 profile="/usr/sbin/cupsd"
[ 1897.783240] usbcore: deregistering interface driver ndiswrapper
[ 1897.799332] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 1897.815322] usbcore: registered new interface driver ndiswrapper
[ 2163.536223] usbcore: deregistering interface driver ndiswrapper
[ 2163.560657] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 2163.585858] usbcore: registered new interface driver ndiswrapper
[ 5080.227745] __ratelimit: 3 callbacks suppressed
[ 5080.227764] type=1503 audit(1226010856.831:16): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6854/net/" pid=6854 profile="/usr/sbin/cupsd"
[ 5081.054178] type=1503 audit(1226010857.659:17): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6858/net/" pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054253] type=1503 audit(1226010857.659:18): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054269] type=1503 audit(1226010857.659:19): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054284] type=1503 audit(1226010857.659:20): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054298] type=1503 audit(1226010857.659:21): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054316] type=1503 audit(1226010857.659:22): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054330] type=1503 audit(1226010857.659:23): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054345] type=1503 audit(1226010857.659:24): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6858 profile="/usr/sbin/cupsd"
[ 5081.054364] type=1503 audit(1226010857.659:25): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=6858 profile="/usr/sbin/cupsd"

preterax · Le 07/11/2008, à 00:59

Pour que la carte soit détectée il lui faut le bon module (rtl8187).
Il est présent dans lsmod?

Snaypse · Le 07/11/2008, à 01:02

aprament non, je poste le résultat au cas ou je me goure, en tous cas j'ai une rtl 8187b pas une rtl 8187

Module                  Size  Used by
ndiswrapper           196380  0 
ipv6                  263972  10 
af_packet              25728  2 
binfmt_misc            16904  1 
sco                    18308  2 
rfcomm                 44432  2 
bridge                 56980  0 
stp                    10628  1 bridge
bnep                   20480  2 
l2cap                  30464  16 rfcomm,bnep
ppdev                  15620  0 
acpi_cpufreq           15500  1 
cpufreq_powersave       9856  0 
cpufreq_ondemand       14988  1 
cpufreq_userspace      11396  0 
cpufreq_stats          13188  0 
cpufreq_conservative    14600  0 
freq_table             12672  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
sbs                    19464  0 
sbshc                  13440  1 sbs
container              11520  0 
wmi                    14504  0 
pci_slot               12552  0 
iptable_filter         10752  0 
ip_tables              19600  1 iptable_filter
x_tables               22916  1 ip_tables
sbp2                   29324  0 
parport_pc             39204  0 
lp                     17156  0 
parport                42604  3 ppdev,parport_pc,lp
joydev                 18368  0 
snd_hda_intel         381488  2 
snd_pcm_oss            46848  0 
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10884  0 
snd_seq_oss            38528  0 
serio_raw              13444  0 
evdev                  17696  10 
psmouse                45200  0 
pcspkr                 10624  0 
sdhci_pci              15360  0 
snd_seq_midi           14336  0 
sdhci                  23940  1 sdhci_pci
iTCO_wdt               18596  0 
ricoh_mmc              11904  0 
iTCO_vendor_support    11652  1 iTCO_wdt
mmc_core               58268  1 sdhci
snd_rawmidi            29824  1 snd_seq_midi
btusb                  19736  3 
bluetooth              61924  11 sco,rfcomm,bnep,l2cap,btusb
snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device         15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
video                  25104  0 
output                 11008  1 video
snd                    63268  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery                18436  0 
ac                     12292  0 
asus_laptop            24440  0 
soundcore              15328  1 snd
led_class              12164  1 asus_laptop
button                 14224  0 
intel_agp              33724  0 
agpgart                42184  1 intel_agp
snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
shpchp                 37908  0 
pci_hotplug            35236  1 shpchp
ext3                  133256  1 
jbd                    55444  1 ext3
mbcache                16004  1 ext3
sd_mod                 42264  4 
crc_t10dif              9984  1 sd_mod
sr_mod                 22212  0 
cdrom                  43168  1 sr_mod
sg                     39732  0 
pata_acpi              12160  0 
ata_generic            12932  0 
ata_piix               24580  3 
uhci_hcd               30736  0 
libata                177312  3 pata_acpi,ata_generic,ata_piix
scsi_mod              155212  5 sbp2,sd_mod,sr_mod,sg,libata
dock                   16656  1 libata
ohci1394               37936  0 
ehci_hcd               43276  0 
r8169                  35972  0 
ieee1394               96324  2 sbp2,ohci1394
usbcore               148848  5 ndiswrapper,btusb,uhci_hcd,ehci_hcd
thermal                23708  0 
processor              42156  4 acpi_cpufreq,thermal
fan                    12548  0 
fbcon                  47648  0 
tileblit               10880  1 fbcon
font                   16512  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
fuse                   60828  5

Snaypse · Le 07/11/2008, à 11:14

Quelqu'un pourait m'aider svp?:(

preterax · Le 07/11/2008, à 11:52

Le module rtl8187 gère plusieurs versions de ce chipset dont le 8187b.
D'après ce que j'ai pu lire il "serait" stable depuis le noyau 2.6.27 donc sous Intrepid.
Regarde s'il n'est pas blacklisté "sudo nano /etc/modprobe.d/blacklist"
Ensuite charge le "sudo modprode rtl8187" et regarde s'il est bien chargé avec dmesg.

Snaypse · Le 07/11/2008, à 12:29

je n'ai pas trouvé le nom de ma carte wifi, donc je supose qu'elle n'est pas black lister
sudo nano /etc/modprobe.d/blacklist

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

la commande sudo modprode rtl8187 n'a rien donné puisque j'ai eu droit a :

sudo: modprode: command not found

donc elle n'est toujours pas présente dans dmesg:

[    0.596865] PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbefffff]
[    0.596873] PCI: bridge 0000:00:1c.2 64bit mmio pref: [dc000000, dfffffff]
[    0.596915] PCI: 0000:06:01.0 reg 10 32bit mmio: [fbffe800, fbffefff]
[    0.596968] pci 0000:06:01.0: supports D1
[    0.596970] pci 0000:06:01.0: supports D2
[    0.596972] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.596978] pci 0000:06:01.0: PME# disabled
[    0.597012] PCI: 0000:06:01.1 reg 10 32bit mmio: [fbfff000, fbfff0ff]
[    0.597065] pci 0000:06:01.1: supports D1
[    0.597067] pci 0000:06:01.1: supports D2
[    0.597069] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.597074] pci 0000:06:01.1: PME# disabled
[    0.597109] PCI: 0000:06:01.2 reg 10 32bit mmio: [fbfff400, fbfff4ff]
[    0.597162] pci 0000:06:01.2: supports D1
[    0.597163] pci 0000:06:01.2: supports D2
[    0.597166] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.597171] pci 0000:06:01.2: PME# disabled
[    0.597205] PCI: 0000:06:01.3 reg 10 32bit mmio: [fbfff800, fbfff8ff]
[    0.597258] pci 0000:06:01.3: supports D1
[    0.597260] pci 0000:06:01.3: supports D2
[    0.597262] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.597267] pci 0000:06:01.3: PME# disabled
[    0.597302] PCI: 0000:06:01.4 reg 10 32bit mmio: [fbfffc00, fbfffcff]
[    0.597354] pci 0000:06:01.4: supports D1
[    0.597356] pci 0000:06:01.4: supports D2
[    0.597358] pci 0000:06:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.597364] pci 0000:06:01.4: PME# disabled
[    0.597411] PCI: 0000:06:07.0 reg 10 io port: [e800, e8ff]
[    0.597419] PCI: 0000:06:07.0 reg 14 32bit mmio: [fbffe400, fbffe4ff]
[    0.597451] PCI: 0000:06:07.0 reg 30 32bit mmio: [fbfc0000, fbfdffff]
[    0.597469] pci 0000:06:07.0: supports D1
[    0.597471] pci 0000:06:07.0: supports D2
[    0.597473] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.597478] pci 0000:06:07.0: PME# disabled
[    0.597518] pci 0000:00:1e.0: transparent bridge
[    0.597523] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[    0.597528] PCI: bridge 0000:00:1e.0 32bit mmio: [fbf00000, fbffffff]
[    0.597561] bus 00 -> node 0
[    0.597569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.597877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.598058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.598204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.598348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.652553] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.652553] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.652553] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.652723] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.652897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.653073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.653247] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.653422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.653503] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.653503] pnp: PnP ACPI init
[    0.653503] ACPI: bus type pnp registered
[    0.657172] pnp: PnP ACPI: found 13 devices
[    0.657175] ACPI: ACPI bus type pnp unregistered
[    0.657179] PnPBIOS: Disabled by ACPI PNP
[    0.660088] PCI: Using ACPI for IRQ routing
[    0.664044] NET: Registered protocol family 8
[    0.664047] NET: Registered protocol family 20
[    0.664074] NetLabel: Initializing
[    0.664074] NetLabel:  domain hash size = 128
[    0.664074] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.664074] NetLabel:  unlabeled traffic allowed by default
[    0.664074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.664074] hpet0: 3 64-bit timers, 14318180 Hz
[    0.665619] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.665622]    actual entries 65620
[    0.665741] AppArmor: AppArmor Filesystem Enabled
[    0.665765] ACPI: RTC can wake from S4
[    0.668042] Switched to high resolution mode on CPU 0
[    0.668442] Switched to high resolution mode on CPU 1
[    0.668466] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.668480] system 00:08: ioport range 0x25c-0x25f has been reserved
[    0.668484] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.668487] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.668491] system 00:08: ioport range 0x500-0x53f has been reserved
[    0.668495] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.668498] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.668502] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.668505] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.668509] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.668517] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.668521] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.668527] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.668535] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.668538] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.668542] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.668546] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
[    0.703723] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.703727] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.703733] pci 0000:00:01.0:   MEM window: 0xf4000000-0xf7ffffff
[    0.703737] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.703743] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.703746] pci 0000:00:1c.0:   IO window: disabled
[    0.703752] pci 0000:00:1c.0:   MEM window: disabled
[    0.703756] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.703764] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.703766] pci 0000:00:1c.1:   IO window: disabled
[    0.703772] pci 0000:00:1c.1:   MEM window: disabled
[    0.703777] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.703784] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.703788] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
[    0.703794] pci 0000:00:1c.2:   MEM window: 0xf8000000-0xfbefffff
[    0.703799] pci 0000:00:1c.2:   PREFETCH window: 0x000000dc000000-0x000000dfffffff
[    0.703808] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.703812] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.703818] pci 0000:00:1e.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.703823] pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
[    0.703843] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.703849] pci 0000:00:01.0: setting latency timer to 64
[    0.703858] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.703863] pci 0000:00:1c.0: setting latency timer to 64
[    0.703873] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.703878] pci 0000:00:1c.1: setting latency timer to 64
[    0.703888] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.703893] pci 0000:00:1c.2: setting latency timer to 64
[    0.703901] pci 0000:00:1e.0: setting latency timer to 64
[    0.703905] bus: 00 index 0 io port: [0, ffff]
[    0.703907] bus: 00 index 1 mmio: [0, ffffffff]
[    0.703910] bus: 01 index 0 io port: [c000, cfff]
[    0.703913] bus: 01 index 1 mmio: [f4000000, f7ffffff]
[    0.703915] bus: 01 index 2 mmio: [c0000000, cfffffff]
[    0.703917] bus: 01 index 3 mmio: [0, 0]
[    0.703920] bus: 05 index 0 mmio: [0, 0]
[    0.703922] bus: 05 index 1 mmio: [0, 0]
[    0.703924] bus: 05 index 2 mmio: [0, 0]
[    0.703926] bus: 05 index 3 mmio: [0, 0]
[    0.703928] bus: 04 index 0 mmio: [0, 0]
[    0.703930] bus: 04 index 1 mmio: [0, 0]
[    0.703932] bus: 04 index 2 mmio: [0, 0]
[    0.703935] bus: 04 index 3 mmio: [0, 0]
[    0.703937] bus: 02 index 0 io port: [d000, dfff]
[    0.703939] bus: 02 index 1 mmio: [f8000000, fbefffff]
[    0.703942] bus: 02 index 2 mmio: [dc000000, dfffffff]
[    0.703944] bus: 02 index 3 mmio: [0, 0]
[    0.703946] bus: 06 index 0 io port: [e000, efff]
[    0.703949] bus: 06 index 1 mmio: [fbf00000, fbffffff]
[    0.703951] bus: 06 index 2 mmio: [d0000000, d00fffff]
[    0.703954] bus: 06 index 3 io port: [0, ffff]
[    0.703956] bus: 06 index 4 mmio: [0, ffffffff]
[    0.703967] NET: Registered protocol family 2
[    0.717058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.717344] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.717852] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.718204] TCP: Hash tables configured (established 131072 bind 65536)
[    0.718209] TCP reno registered
[    0.721124] NET: Registered protocol family 1
[    0.721268] checking if image is initramfs... it is
[    1.514378] Freeing initrd memory: 7990k freed
[    1.515664] audit: initializing netlink socket (disabled)
[    1.515682] type=2000 audit(1226056814.512:1): initialized
[    1.522474] highmem bounce pool size: 64 pages
[    1.522481] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.525059] VFS: Disk quotas dquot_6.5.1
[    1.525161] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.525277] msgmni has been set to 1725
[    1.525418] io scheduler noop registered
[    1.525421] io scheduler anticipatory registered
[    1.525424] io scheduler deadline registered
[    1.525438] io scheduler cfq registered (default)
[    1.525588] pci 0000:01:00.0: Boot video device
[    1.525734] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.525782] pcieport-driver 0000:00:01.0: found MSI capability
[    1.525822] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.525870] pci_express 0000:00:01.0:pcie02: allocate port service
[    1.525914] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.526018] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.526059] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.526101] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.526147] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.526193] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.526299] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.526341] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.526382] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.526425] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.526470] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.526572] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.526614] pcieport-driver 0000:00:1c.2: found MSI capability
[    1.526655] pci_express 0000:00:1c.2:pcie00: allocate port service
[    1.526701] pci_express 0000:00:1c.2:pcie02: allocate port service
[    1.526744] pci_express 0000:00:1c.2:pcie03: allocate port service
[    1.527119] isapnp: Scanning for PnP cards...
[    1.880305] isapnp: No Plug & Play device found
[    1.917249] hpet_resources: 0xfed00000 is busy
[    1.917354] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.919811] brd: module loaded
[    1.919890] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.920033] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.922548] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.923187] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.923193] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.923197] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.923199] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.923202] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.923530] mice: PS/2 mouse device common for all mice
[    1.923681] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.923708] rtc0: alarms up to one month, y3k, hpet irqs
[    1.923862] EISA: Probing bus 0 at eisa.0
[    1.923893] EISA: Detected 0 cards.
[    1.923897] cpuidle: using governor ladder
[    1.923900] cpuidle: using governor menu
[    1.924504] TCP cubic registered
[    1.924538] Using IPI No-Shortcut mode
[    1.924753] registered taskstats version 1
[    1.924903]   Magic number: 0:991:326
[    1.924925] tty ttyyf: hash matches
[    1.925044] rtc_cmos 00:03: setting system clock to 2008-11-07 11:20:15 UTC (1226056815)
[    1.925048] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.925050] EDD information not available.
[    1.925296] Freeing unused kernel memory: 424k freed
[    1.925338] Write protecting the kernel text: 2576k
[    1.925368] Write protecting the kernel read-only data: 936k
[    1.955751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.091193] fuse init (API version 7.9)
[    2.160523] ACPI: SSDT BFF9E0B0, 08FE (r1    AMI   CPU1PM        1 INTL 20060113)
[    2.161330] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.161398] processor ACPI0007:00: registered as cooling_device0
[    2.161724] ACPI: SSDT BFF9E9B0, 0120 (r1    AMI   CPU2PM        1 INTL 20060113)
[    2.162536] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.162591] processor ACPI0007:01: registered as cooling_device1
[    2.165525] Marking TSC unstable due to TSC halts in idle
[    2.166227] thermal LNXTHERM:01: registered as thermal_zone0
[    2.167156] ACPI: Thermal Zone [TZ00] (56 C)
[    2.602491] usbcore: registered new interface driver usbfs
[    2.602524] usbcore: registered new interface driver hub
[    2.602582] usbcore: registered new device driver usb
[    2.606341] USB Universal Host Controller Interface driver v3.0
[    2.606398] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.606410] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.606414] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.606470] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.606508] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[    2.606672] usb usb1: configuration #1 chosen from 1 choice
[    2.606705] hub 1-0:1.0: USB hub found
[    2.606715] hub 1-0:1.0: 2 ports detected
[    2.712325] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.712405] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.712411] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.712441] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    2.712484] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00
[    2.712601] usb usb2: configuration #1 chosen from 1 choice
[    2.712634] hub 2-0:1.0: USB hub found
[    2.712643] hub 2-0:1.0: 2 ports detected
[    2.861872] No dock devices found.
[    2.920402] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.920421] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.920425] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.920488] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    2.920809] SCSI subsystem initialized
[    2.924391] ehci_hcd 0000:00:1a.7: debug port 1
[    2.924399] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.924417] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00
[    3.116040] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    3.125020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.125206] usb usb3: configuration #1 chosen from 1 choice
[    3.125240] hub 3-0:1.0: USB hub found
[    3.125251] hub 3-0:1.0: 4 ports detected
[    3.125298] libata version 3.00 loaded.
[    3.184161] hub 2-0:1.0: unable to enumerate USB device on port 2
[    3.337260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.337271] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.337276] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.337321] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    3.337359] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[    3.337509] usb usb4: configuration #1 chosen from 1 choice
[    3.337541] hub 4-0:1.0: USB hub found
[    3.337550] hub 4-0:1.0: 2 ports detected
[    3.444730] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.444742] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.444746] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.444790] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    3.444826] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[    3.444955] usb usb5: configuration #1 chosen from 1 choice
[    3.444987] hub 5-0:1.0: USB hub found
[    3.444996] hub 5-0:1.0: 2 ports detected
[    3.448037] usb 3-4: new high speed USB device using ehci_hcd and address 2
[    3.548689] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.548699] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.548704] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.548741] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    3.548770] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[    3.548892] usb usb6: configuration #1 chosen from 1 choice
[    3.548924] hub 6-0:1.0: USB hub found
[    3.548932] hub 6-0:1.0: 2 ports detected
[    3.584117] usb 3-4: configuration #1 chosen from 1 choice
[    3.756917] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.756934] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.756938] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.756980] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    3.760875] ehci_hcd 0000:00:1d.7: debug port 1
[    3.760882] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.760891] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800
[    3.868037] usb 6-1: new full speed USB device using uhci_hcd and address 2
[    3.881028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.881473] usb usb7: configuration #1 chosen from 1 choice
[    3.881767] hub 7-0:1.0: USB hub found
[    3.881778] hub 7-0:1.0: 6 ports detected
[    3.936059] hub 6-0:1.0: unable to enumerate USB device on port 1
[    4.091320] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.091340] r8169 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.091679] eth0: RTL8169sc/8110sc at 0xf883c400, 00:1e:8c:32:d9:de, XID 18000000 IRQ 18
[    4.092490] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.092495] ata_piix 0000:00:1f.1: version 2.12
[    4.092507] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.092556] ata_piix 0000:00:1f.1: setting latency timer to 64
[    4.100055] scsi0 : ata_piix
[    4.100170] scsi1 : ata_piix
[    4.101845] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    4.101849] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    4.144228] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fbffe800-fbffefff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.312038] usb 7-6: new high speed USB device using ehci_hcd and address 3
[    4.512397] ata1.01: ATAPI: SlimtypeDVD A  DS8A1P, CX12, max UDMA/33
[    4.533519] usb 7-6: configuration #1 chosen from 1 choice
[    4.552334] ata1.01: configured for UDMA/33
[    4.552389] ata2: port disabled. ignoring.
[    4.554723] scsi 0:0:1:0: CD-ROM            Slimtype DVD A  DS8A1P    CX12 PQ: 0 ANSI: 5
[    4.554836] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    4.554841] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.708056] ata_piix 0000:00:1f.2: setting latency timer to 64
[    4.708140] scsi2 : ata_piix
[    4.708507] scsi3 : ata_piix
[    4.711714] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18
[    4.711721] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18
[    4.772036] usb 6-1: new full speed USB device using uhci_hcd and address 3
[    5.018853] usb 6-1: configuration #1 chosen from 1 choice
[    5.185098] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.194074] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7
[    5.194078] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.210072] ata3.00: configured for UDMA/133
[    5.422233] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[008c1e00e39c0e00]
[    5.538875] ata4: SATA link down (SStatus 0 SControl 0)
[    5.539023] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
[    5.557852] scsi 0:0:1:0: Attached scsi generic sg0 type 5
[    5.557896] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    5.582092] Driver 'sd' needs updating - please use bus_type methods
[    5.582235] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.582258] sd 2:0:0:0: [sda] Write Protect is off
[    5.582261] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.582298] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.582389] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.582410] sd 2:0:0:0: [sda] Write Protect is off
[    5.582413] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.582450] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.582455]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.598464] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.598469] Uniform CD-ROM driver Revision: 3.20
[    5.598584] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    6.197508]  sda1 sda2 < sda5 sda6 sda7 >
[    6.237692] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.596335] PM: Starting manual resume from disk
[    6.596340] PM: Resume from partition 8:6
[    6.596342] PM: Checking hibernation image.
[    6.596560] PM: Resume from disk failed.
[    6.647103] kjournald starting.  Commit interval 5 seconds
[    6.647116] EXT3-fs: mounted filesystem with ordered data mode.
[   13.174219] udevd version 124 started
[   13.681631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.774667] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.906293] Linux agpgart interface v0.103
[   13.932080] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   13.949051] ACPI: Power Button (FF) [PWRF]
[   13.949191] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   13.950762] ACPI: Lid Switch [LID]
[   13.950831] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   13.977034] ACPI: Sleep Button (CM) [SLPB]
[   13.977206] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   13.993028] ACPI: Power Button (CM) [PWRB]
[   14.202407] iTCO_vendor_support: vendor-support=0
[   14.255809] asus-laptop: Asus Laptop Support version 0.42
[   14.258808] asus-laptop: Error calling BSTS
[   14.258900] asus-laptop:   Z96S model detected
[   14.269583] Registered led device: asus::mail
[   14.370198] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   14.370292] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   14.370311] iTCO_wdt: No card detected
[   14.432018] ricoh-mmc: Ricoh MMC Controller disabling driver
[   14.432022] ricoh-mmc: Copyright(c) Philip Langdale
[   14.432244] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 12)
[   14.432274] ricoh-mmc: Controller is now disabled.
[   14.433549] ACPI: Battery Slot [BAT0] (battery absent)
[   14.477622] ACPI: AC Adapter [AC0] (on-line)
[   14.504902] sdhci: Secure Digital Host Controller Interface driver
[   14.504906] sdhci: Copyright(c) Pierre Ossman
[   14.547728] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)
[   14.547746] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.550885] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO
[   14.599357] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input6
[   14.633241] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   14.777709] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   14.934746] Bluetooth: Core ver 2.13
[   14.945348] NET: Registered protocol family 31
[   14.945351] Bluetooth: HCI device and connection manager initialized
[   14.945356] Bluetooth: HCI socket layer initialized
[   14.999040] usbcore: registered new interface driver ndiswrapper
[   15.018554] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   15.018679] usbcore: registered new interface driver btusb
[   15.063152] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   15.598524] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   15.598559] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.631026] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   15.862841] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   15.903491] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   17.165858] lp: driver loaded but no devices found
[   17.347013] Adding 2045944k swap on /dev/sda6.  Priority:-1 extents:1 across:2045944k
[   17.897676] EXT3 FS on sda7, internal journal
[   19.001154] type=1505 audit(1226053233.014:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4365
[   19.191597] type=1505 audit(1226053233.202:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4370
[   19.191833] type=1505 audit(1226053233.202:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4370
[   19.338171] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.980196] ACPI: WMI: Mapper loaded
[   20.969280] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   21.017296] apm: BIOS not found.
[   21.198569] ppdev: user-space parallel port driver
[   22.884732] Bluetooth: L2CAP ver 2.11
[   22.884746] Bluetooth: L2CAP socket layer initialized
[   22.922837] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.922851] Bluetooth: BNEP filters: protocol multicast
[   22.987276] Bridge firewalling registered
[   22.987590] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   23.015643] Bluetooth: SCO (Voice Link) ver 0.6
[   23.015664] Bluetooth: SCO socket layer initialized
[   23.032257] Bluetooth: RFCOMM socket layer initialized
[   23.032290] Bluetooth: RFCOMM TTY layer initialized
[   23.032297] Bluetooth: RFCOMM ver 1.10
[   25.099950] mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary
[   26.095643] usb 3-4: USB disconnect, address 2
[   27.217602] r8169: eth0: link up
[   27.491510] NET: Registered protocol family 17
[   57.923072] CPU0 attaching NULL sched-domain.
[   57.923097] CPU1 attaching NULL sched-domain.
[   57.925669] CPU0 attaching sched-domain:
[   57.925681]  domain 0: span 0-1 level MC
[   57.925688]   groups: 0 1
[   57.925701] CPU1 attaching sched-domain:
[   57.925707]  domain 0: span 0-1 level MC
[   57.925713]   groups: 1 0
[   76.099782] NET: Registered protocol family 10
[   76.100389] lo: Disabled Privacy Extensions
[   86.412027] eth0: no IPv6 routers present
[  126.494781] type=1503 audit(1226053342.452:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5983/net/" pid=5983 profile="/usr/sbin/cupsd"
[  127.573102] type=1503 audit(1226053343.532:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5987/net/" pid=5987 profile="/usr/sbin/cupsd"
[  127.573175] type=1503 audit(1226053343.532:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573191] type=1503 audit(1226053343.532:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573205] type=1503 audit(1226053343.532:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573222] type=1503 audit(1226053343.532:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573237] type=1503 audit(1226053343.532:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573251] type=1503 audit(1226053343.532:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573270] type=1503 audit(1226053343.532:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5987 profile="/usr/sbin/cupsd"
[  127.573285] type=1503 audit(1226053343.532:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5987 profile="/usr/sbin/cupsd"

si j'ai bien comprie le nouveau noyau devrais la prendre en charge nativement?
ps: le voyant de ma carte wifi s'allume pedant le chargement d'ubuntu puis s'etein dés que j'arrive au menu pour enter mon identifiant

Dernière modification par Snaypse (Le 07/11/2008, à 13:29)

preterax · Le 07/11/2008, à 14:20

Milles excuses ce n'est modprode mais modprobe
Oui, normalement elle est supportée nativement depuis le 2.6.27.

Dernière modification par preterax (Le 07/11/2008, à 14:21)

Snaypse · Le 07/11/2008, à 15:08

Bon j'ai executer la commande sudo modprobe rtl8187 et rien ne c'est afficher,ensuite j'ai fait un dmesg et en tout a la fin il y :
[ 145.118644] usbcore: registered new interface driver rtl8187
ça veut dire quoi? quesque je suis sencé faire?

[ 0.596760] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.596769] PCI: 0000:00:1f.1 reg 18 io port: [8f0, 8f7]
[ 0.596777] PCI: 0000:00:1f.1 reg 1c io port: [8f8, 8fb]
[ 0.596785] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 0.596833] PCI: 0000:00:1f.2 reg 10 io port: [b080, b087]
[ 0.596840] PCI: 0000:00:1f.2 reg 14 io port: [b000, b003]
[ 0.596847] PCI: 0000:00:1f.2 reg 18 io port: [ac00, ac07]
[ 0.596855] PCI: 0000:00:1f.2 reg 1c io port: [a880, a883]
 0.596862] PCI: 0000:00:1f.2 reg 20 io port: [a800, a80f]
[ 0.596869] PCI: 0000:00:1f.2 reg 24 io port: [a480, a48f]
[ 0.596891] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.596896] pci 0000:00:1f.2: PME# disabled
[ 0.596915] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff]
[ 0.596938] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.596996] PCI: 0000:01:00.0 reg 10 32bit mmio: [f7000000, f7ffffff]
[ 0.597003] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff]
[ 0.597020] PCI: 0000:01:00.0 reg 1c 64bit mmio: [f4000000, f5ffffff]
[ 0.597028] PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f]
[ 0.597035] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.597095] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.597099] PCI: bridge 0000:00:01.0 32bit mmio: [f4000000, f7ffffff]
[ 0.597105] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[ 0.597268] PCI: bridge 0000:00:1c.2 io port: [d000, dfff]
[ 0.597273] PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbefffff]
[ 0.597280] PCI: bridge 0000:00:1c.2 64bit mmio pref: [dc000000, dfffffff]
[ 0.597322] PCI: 0000:06:01.0 reg 10 32bit mmio: [fbffe800, fbffefff]
[ 0.597375] pci 0000:06:01.0: supports D1
[ 0.597377] pci 0000:06:01.0: supports D2
[ 0.597379] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.597384] pci 0000:06:01.0: PME# disabled
[ 0.597419] PCI: 0000:06:01.1 reg 10 32bit mmio: [fbfff000, fbfff0ff]
[ 0.597471] pci 0000:06:01.1: supports D1
[ 0.597473] pci 0000:06:01.1: supports D2
[ 0.597476] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.597481] pci 0000:06:01.1: PME# disabled
[ 0.597515] PCI: 0000:06:01.2 reg 10 32bit mmio: [fbfff400, fbfff4ff]
[ 0.597568] pci 0000:06:01.2: supports D1
[ 0.597570] pci 0000:06:01.2: supports D2
[ 0.597572] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.597577] pci 0000:06:01.2: PME# disabled
[ 0.597612] PCI: 0000:06:01.3 reg 10 32bit mmio: [fbfff800, fbfff8ff]
[ 0.597664] pci 0000:06:01.3: supports D1
[ 0.597666] pci 0000:06:01.3: supports D2
[ 0.597668] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.597674] pci 0000:06:01.3: PME# disabled
[ 0.597708] PCI: 0000:06:01.4 reg 10 32bit mmio: [fbfffc00, fbfffcff]
[ 0.597761] pci 0000:06:01.4: supports D1
[ 0.597762] pci 0000:06:01.4: supports D2
[ 0.597765] pci 0000:06:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.597770] pci 0000:06:01.4: PME# disabled
[ 0.597817] PCI: 0000:06:07.0 reg 10 io port: [e800, e8ff]
[ 0.597825] PCI: 0000:06:07.0 reg 14 32bit mmio: [fbffe400, fbffe4ff]
[ 0.597857] PCI: 0000:06:07.0 reg 30 32bit mmio: [fbfc0000, fbfdffff]
[ 0.597875] pci 0000:06:07.0: supports D1
[ 0.597877] pci 0000:06:07.0: supports D2
[ 0.597879] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.597885] pci 0000:06:07.0: PME# disabled
[ 0.597924] pci 0000:00:1e.0: transparent bridge
[ 0.597929] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[ 0.597934] PCI: bridge 0000:00:1e.0 32bit mmio: [fbf00000, fbffffff]
[ 0.597967] bus 00 -> node 0
[ 0.597976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]



[ 0.598285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]



[ 0.598466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]



[ 0.598611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]



[ 0.598756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]



[ 0.653274] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)



[ 0.653274] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)



[ 0.653274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)



[ 0.653274] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)



[ 0.653274] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.



[ 0.653274] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)



[ 0.653274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)



[ 0.653424] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)



[ 0.653505] Linux Plug and Play Support v0.97 (c) Adam Belay



[ 0.653505] pnp: PnP ACPI init



[ 0.653505] ACPI: bus type pnp registered



[ 0.660273] pnp: PnP ACPI: found 13 devices



[ 0.660273] ACPI: ACPI bus type pnp unregistered



[ 0.660273] PnPBIOS: Disabled by ACPI PNP



[ 0.660296] PCI: Using ACPI for IRQ routing



[ 0.664045] NET: Registered protocol family 8



[ 0.664048] NET: Registered protocol family 20



[ 0.664075] NetLabel: Initializing



[ 0.664075] NetLabel: domain hash size = 128



[ 0.664075] NetLabel: protocols = UNLABELED CIPSOv4



[ 0.664075] NetLabel: unlabeled traffic allowed by default



[ 0.664075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0



[ 0.664075] hpet0: 3 64-bit timers, 14318180 Hz



[ 0.665619] tracer: 772 pages allocated for 65536 entries of 48 bytes



[ 0.665622] actual entries 65620



[ 0.665741] AppArmor: AppArmor Filesystem Enabled



[ 0.665764] ACPI: RTC can wake from S4



[ 0.668041] Switched to high resolution mode on CPU 0



[ 0.668477] Switched to high resolution mode on CPU 1



[ 0.668501] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved



[ 0.668516] system 00:08: ioport range 0x25c-0x25f has been reserved



[ 0.668520] system 00:08: ioport range 0x4d0-0x4d1 has been reserved



[ 0.668524] system 00:08: ioport range 0x800-0x87f has been reserved



[ 0.668527] system 00:08: ioport range 0x500-0x53f has been reserved



[ 0.668531] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved



[ 0.668535] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved



[ 0.668538] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved



[ 0.668542] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved



[ 0.668546] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved



[ 0.668554] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved



[ 0.668558] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved



[ 0.668565] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved



[ 0.668572] system 00:0c: iomem range 0x0-0x9ffff could not be reserved



[ 0.668576] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved



[ 0.668579] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved



[ 0.668583] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved



[ 0.703754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01



[ 0.703758] pci 0000:00:01.0: IO window: 0xc000-0xcfff



[ 0.703763] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff



[ 0.703767] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff



[ 0.703774] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05



[ 0.703776] pci 0000:00:1c.0: IO window: disabled



[ 0.703782] pci 0000:00:1c.0: MEM window: disabled



[ 0.703787] pci 0000:00:1c.0: PREFETCH window: disabled



[ 0.703794] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04



[ 0.703797] pci 0000:00:1c.1: IO window: disabled



[ 0.703803] pci 0000:00:1c.1: MEM window: disabled



[ 0.703807] pci 0000:00:1c.1: PREFETCH window: disabled



[ 0.703815] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02



[ 0.703819] pci 0000:00:1c.2: IO window: 0xd000-0xdfff



[ 0.703825] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff



[ 0.703830] pci 0000:00:1c.2: PREFETCH window: 0x000000dc000000-0x000000dfffffff



[ 0.703839] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06



[ 0.703842] pci 0000:00:1e.0: IO window: 0xe000-0xefff



[ 0.703849] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff



[ 0.703854] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff



[ 0.703874] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16



[ 0.703880] pci 0000:00:01.0: setting latency timer to 64



[ 0.703889] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22



[ 0.703894] pci 0000:00:1c.0: setting latency timer to 64



[ 0.703904] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23



[ 0.703909] pci 0000:00:1c.1: setting latency timer to 64



[ 0.703918] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18



[ 0.703924] pci 0000:00:1c.2: setting latency timer to 64



[ 0.703932] pci 0000:00:1e.0: setting latency timer to 64



[ 0.703936] bus: 00 index 0 io port: [0, ffff]



[ 0.703939] bus: 00 index 1 mmio: [0, ffffffff]



[ 0.703941] bus: 01 index 0 io port: [c000, cfff]



[ 0.703944] bus: 01 index 1 mmio: [f4000000, f7ffffff]



[ 0.703946] bus: 01 index 2 mmio: [c0000000, cfffffff]



[ 0.703948] bus: 01 index 3 mmio: [0, 0]



[ 0.703951] bus: 05 index 0 mmio: [0, 0]



[ 0.703953] bus: 05 index 1 mmio: [0, 0]



[ 0.703955] bus: 05 index 2 mmio: [0, 0]



[ 0.703957] bus: 05 index 3 mmio: [0, 0]



[ 0.703959] bus: 04 index 0 mmio: [0, 0]



[ 0.703961] bus: 04 index 1 mmio: [0, 0]



[ 0.703964] bus: 04 index 2 mmio: [0, 0]



[ 0.703966] bus: 04 index 3 mmio: [0, 0]



[ 0.703968] bus: 02 index 0 io port: [d000, dfff]



[ 0.703970] bus: 02 index 1 mmio: [f8000000, fbefffff]



[ 0.703973] bus: 02 index 2 mmio: [dc000000, dfffffff]



[ 0.703975] bus: 02 index 3 mmio: [0, 0]



[ 0.703977] bus: 06 index 0 io port: [e000, efff]



[ 0.703980] bus: 06 index 1 mmio: [fbf00000, fbffffff]



[ 0.703982] bus: 06 index 2 mmio: [d0000000, d00fffff]



[ 0.703984] bus: 06 index 3 io port: [0, ffff]



[ 0.703987] bus: 06 index 4 mmio: [0, ffffffff]



[ 0.703998] NET: Registered protocol family 2



[ 0.717060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)



[ 0.717343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)



[ 0.717852] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)



[ 0.718205] TCP: Hash tables configured (established 131072 bind 65536)



[ 0.718210] TCP reno registered



[ 0.721124] NET: Registered protocol family 1



[ 0.721268] checking if image is initramfs... it is



[ 1.513508] Freeing initrd memory: 7990k freed



[ 1.514793] audit: initializing netlink socket (disabled)



[ 1.514810] type=2000 audit(1226065455.512:1): initialized



[ 1.521603] highmem bounce pool size: 64 pages



[ 1.521610] HugeTLB registered 4 MB page size, pre-allocated 0 pages



[ 1.524182] VFS: Disk quotas dquot_6.5.1



[ 1.524282] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)



[ 1.524398] msgmni has been set to 1725



[ 1.524540] io scheduler noop registered



[ 1.524543] io scheduler anticipatory registered



[ 1.524546] io scheduler deadline registered



[ 1.524560] io scheduler cfq registered (default)



[ 1.524709] pci 0000:01:00.0: Boot video device



[ 1.524855] pcieport-driver 0000:00:01.0: setting latency timer to 64



[ 1.524903] pcieport-driver 0000:00:01.0: found MSI capability



[ 1.524944] pci_express 0000:00:01.0:pcie00: allocate port service



[ 1.524992] pci_express 0000:00:01.0:pcie02: allocate port service



[ 1.525042] pci_express 0000:00:01.0:pcie03: allocate port service



[ 1.525144] pcieport-driver 0000:00:1c.0: setting latency timer to 64



[ 1.525186] pcieport-driver 0000:00:1c.0: found MSI capability



[ 1.525227] pci_express 0000:00:1c.0:pcie00: allocate port service



[ 1.525273] pci_express 0000:00:1c.0:pcie02: allocate port service



[ 1.525318] pci_express 0000:00:1c.0:pcie03: allocate port service



[ 1.525424] pcieport-driver 0000:00:1c.1: setting latency timer to 64



[ 1.525466] pcieport-driver 0000:00:1c.1: found MSI capability



[ 1.525507] pci_express 0000:00:1c.1:pcie00: allocate port service



[ 1.525550] pci_express 0000:00:1c.1:pcie02: allocate port service



[ 1.525594] pci_express 0000:00:1c.1:pcie03: allocate port service



[ 1.525697] pcieport-driver 0000:00:1c.2: setting latency timer to 64



[ 1.525739] pcieport-driver 0000:00:1c.2: found MSI capability



[ 1.525780] pci_express 0000:00:1c.2:pcie00: allocate port service



[ 1.525827] pci_express 0000:00:1c.2:pcie02: allocate port service



[ 1.525869] pci_express 0000:00:1c.2:pcie03: allocate port service



[ 1.526243] isapnp: Scanning for PnP cards...



[ 1.879428] isapnp: No Plug & Play device found



[ 1.916118] hpet_resources: 0xfed00000 is busy



[ 1.916225] Serial: 8250/16550 driver4 ports, IRQ sharing enabled



[ 1.918693] brd: module loaded



[ 1.918770] input: Macintosh mouse button emulation as /devices/virtual/input/input0



[ 1.918915] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12



[ 1.921020] i8042.c: Detected active multiplexing controller, rev 1.1.



[ 1.921658] serio: i8042 KBD port at 0x60,0x64 irq 1



[ 1.921665] serio: i8042 AUX0 port at 0x60,0x64 irq 12



[ 1.921668] serio: i8042 AUX1 port at 0x60,0x64 irq 12



[ 1.921670] serio: i8042 AUX2 port at 0x60,0x64 irq 12



[ 1.921673] serio: i8042 AUX3 port at 0x60,0x64 irq 12



[ 1.922052] mice: PS/2 mouse device common for all mice



[ 1.922207] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0



[ 1.922234] rtc0: alarms up to one month, y3k, hpet irqs



[ 1.922386] EISA: Probing bus 0 at eisa.0



[ 1.922417] EISA: Detected 0 cards.



[ 1.922421] cpuidle: using governor ladder



[ 1.922424] cpuidle: using governor menu



[ 1.923018] TCP cubic registered



[ 1.923050] Using IPI No-Shortcut mode



[ 1.923267] registered taskstats version 1



[ 1.923422] Magic number: 0:618:735



[ 1.923561] rtc_cmos 00:03: setting system clock to 2008-11-07 13:44:17 UTC (1226065457)



[ 1.923565] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found



[ 1.923567] EDD information not available.



[ 1.923814] Freeing unused kernel memory: 424k freed



[ 1.923857] Write protecting the kernel text: 2576k



[ 1.923888] Write protecting the kernel read-only data: 936k



[ 1.954131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1



[ 2.066085] fuse init (API version 7.9)



[ 2.140507] ACPI: SSDT BFF9E0B0, 08FE (r1 AMI CPU1PM 1 INTL 20060113)



[ 2.141316] ACPI: CPU0 (power states: C1[C1] C2[C2])



[ 2.141383] processor ACPI0007:00: registered as cooling_device0



[ 2.141706] ACPI: SSDT BFF9E9B0, 0120 (r1 AMI CPU2PM 1 INTL 20060113)



[ 2.142514] ACPI: CPU1 (power states: C1[C1] C2[C2])



[ 2.142569] processor ACPI0007:01: registered as cooling_device1



[ 2.145513] Marking TSC unstable due to TSC halts in idle



[ 2.146216] thermal LNXTHERM:01: registered as thermal_zone0



[ 2.147265] ACPI: Thermal Zone [TZ00] (56 C)



[ 2.598903] usbcore: registered new interface driver usbfs



[ 2.598935] usbcore: registered new interface driver hub



[ 2.601441] usbcore: registered new device driver usb



[ 2.604509] USB Universal Host Controller Interface driver v3.0



[ 2.604562] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16



[ 2.604573] uhci_hcd 0000:00:1a.0: setting latency timer to 64



[ 2.604578] uhci_hcd 0000:00:1a.0: UHCI Host Controller



[ 2.604629] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1



[ 2.604672] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880



[ 2.604835] usb usb1: configuration #1 chosen from 1 choice



[ 2.604866] hub 1-0:1.0: USB hub found



[ 2.604875] hub 1-0:1.0: 2 ports detected



[ 2.653513] No dock devices found.



[ 2.688223] SCSI subsystem initialized



[ 2.707670] libata version 3.00 loaded.



[ 2.708394] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17



[ 2.708404] uhci_hcd 0000:00:1a.1: setting latency timer to 64



[ 2.708409] uhci_hcd 0000:00:1a.1: UHCI Host Controller



[ 2.708445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2



[ 2.708481] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00



[ 2.708602] usb usb2: configuration #1 chosen from 1 choice



[ 2.708635] hub 2-0:1.0: USB hub found



[ 2.708643] hub 2-0:1.0: 2 ports detected



[ 2.916380] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18



[ 2.916401] ehci_hcd 0000:00:1a.7: setting latency timer to 64



[ 2.916405] ehci_hcd 0000:00:1a.7: EHCI Host Controller



[ 2.916445] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3



[ 2.920371] ehci_hcd 0000:00:1a.7: debug port 1



[ 2.920379] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported



[ 2.920399] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00



[ 3.028042] usb 2-2: new full speed USB device using uhci_hcd and address 2



[ 3.081027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004



[ 3.081203] usb usb3: configuration #1 chosen from 1 choice



[ 3.081238] hub 3-0:1.0: USB hub found



[ 3.081250] hub 3-0:1.0: 4 ports detected



[ 3.136075] hub 2-0:1.0: unable to enumerate USB device on port 2



[ 3.289344] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23



[ 3.289356] uhci_hcd 0000:00:1d.0: setting latency timer to 64



[ 3.289360] uhci_hcd 0000:00:1d.0: UHCI Host Controller



[ 3.289391] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4



[ 3.289427] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400



[ 3.289534] usb usb4: configuration #1 chosen from 1 choice



[ 3.289568] hub 4-0:1.0: USB hub found



[ 3.289576] hub 4-0:1.0: 2 ports detected



[ 3.393263] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19



[ 3.393273] uhci_hcd 0000:00:1d.1: setting latency timer to 64



[ 3.393277] uhci_hcd 0000:00:1d.1: UHCI Host Controller



[ 3.393307] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5



[ 3.393344] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480



[ 3.393453] usb usb5: configuration #1 chosen from 1 choice



[ 3.393484] hub 5-0:1.0: USB hub found



[ 3.393493] hub 5-0:1.0: 2 ports detected



[ 3.404027] usb 3-4: new high speed USB device using ehci_hcd and address 2



[ 3.497291] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18



[ 3.497303] uhci_hcd 0000:00:1d.2: setting latency timer to 64



[ 3.497308] uhci_hcd 0000:00:1d.2: UHCI Host Controller



[ 3.497341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6



[ 3.497371] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800



[ 3.497492] usb usb6: configuration #1 chosen from 1 choice



[ 3.497524] hub 6-0:1.0: USB hub found



[ 3.497533] hub 6-0:1.0: 2 ports detected



[ 3.543863] usb 3-4: configuration #1 chosen from 1 choice



[ 3.704337] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23



[ 3.704355] ehci_hcd 0000:00:1d.7: setting latency timer to 64



[ 3.704359] ehci_hcd 0000:00:1d.7: EHCI Host Controller



[ 3.704392] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7



[ 3.708308] ehci_hcd 0000:00:1d.7: debug port 1



[ 3.708315] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported



[ 3.708324] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800



[ 3.816037] usb 6-1: new full speed USB device using uhci_hcd and address 2



[ 3.828031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004



[ 3.828167] usb usb7: configuration #1 chosen from 1 choice



[ 3.828201] hub 7-0:1.0: USB hub found



[ 3.828211] hub 7-0:1.0: 6 ports detected



[ 3.884064] hub 6-0:1.0: unable to enumerate USB device on port 1



[ 4.038850] ata_piix 0000:00:1f.1: version 2.12



[ 4.038866] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19



[ 4.038916] ata_piix 0000:00:1f.1: setting latency timer to 64



[ 4.039014] scsi0 : ata_piix



[ 4.039135] scsi1 : ata_piix



[ 4.040814] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14



[ 4.040818] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15



[ 4.260040] usb 7-6: new high speed USB device using ehci_hcd and address 3



[ 4.448405] ata1.01: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33



[ 4.482648] usb 7-6: configuration #1 chosen from 1 choice



[ 4.488333] ata1.01: configured for UDMA/33



[ 4.488395] ata2: port disabled. ignoring.



[ 4.491017] scsi 0:0:1:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5



[ 4.491889] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18



[ 4.491895] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]



[ 4.644059] ata_piix 0000:00:1f.2: setting latency timer to 64



[ 4.644124] scsi2 : ata_piix



[ 4.644514] scsi3 : ata_piix



[ 4.647722] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18



[ 4.647728] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18



[ 4.720032] usb 6-1: new full speed USB device using uhci_hcd and address 3



[ 4.965847] usb 6-1: configuration #1 chosen from 1 choice



[ 5.120099] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)



[ 5.130078] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7



[ 5.130082] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)



[ 5.146078] ata3.00: configured for UDMA/133



[ 5.474896] ata4: SATA link down (SStatus 0 SControl 0)



[ 5.475034] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5



[ 5.476438] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded



[ 5.476459] r8169 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18



[ 5.476805] eth0: RTL8169sc/8110sc at 0xf883c400, 00:1e:8c:32:d9:de, XID 18000000 IRQ 18



[ 5.478640] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16



[ 5.531799] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4]



[ 5.558511] scsi 0:0:1:0: Attached scsi generic sg0 type 5



[ 5.558808] scsi 2:0:0:0: Attached scsi generic sg1 type 0



[ 5.576347] Driver 'sd' needs updating - please use bus_type methods



[ 5.576504] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)



[ 5.576532] sd 2:0:0:0: [sda] Write Protect is off



[ 5.576535] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00



[ 5.576580] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA



[ 5.576679] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)



[ 5.576703] sd 2:0:0:0: [sda] Write Protect is off



[ 5.576707] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00



[ 5.576750] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA



[ 5.576755] sda:<4>Driver 'sr' needs updating - please use bus_type methods



[ 5.591096] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray



[ 5.591102] Uniform CD-ROM driver Revision: 3.20



[ 5.591216] sr 0:0:1:0: Attached scsi CD-ROM sr0



[ 6.190045] sda1 sda2 < sda5 sda6 sda7 >



[ 6.230355] sd 2:0:0:0: [sda] Attached SCSI disk



[ 6.607464] PM: Starting manual resume from disk



[ 6.607469] PM: Resume from partition 8:6



[ 6.607471] PM: Checking hibernation image.



[ 6.607686] PM: Resume from disk failed.



[ 6.650711] kjournald starting. Commit interval 5 seconds



[ 6.650727] EXT3-fs: mounted filesystem with ordered data mode.



[ 6.812289] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008c1e00e39c0e00]



[ 12.571277] udevd version 124 started



[ 13.119630] iTCO_vendor_support: vendor-support=0



[ 13.171471] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)



[ 13.171599] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware



[ 13.171619] iTCO_wdt: No card detected



[ 13.237913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5



[ 13.306586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4



[ 13.429041] Linux agpgart interface v0.103



[ 13.466893] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2



[ 13.489055] ACPI: Power Button (FF) [PWRF]



[ 13.489256] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3



[ 13.490827] ACPI: Lid Switch [LID]



[ 13.490923] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4



[ 13.521029] ACPI: Sleep Button (CM) [SLPB]



[ 13.521162] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5



[ 13.553033] ACPI: Power Button (CM) [PWRB]



[ 13.655599] ACPI: AC Adapter [AC0] (on-line)



[ 13.692722] ACPI: Battery Slot [BAT0] (battery absent)



[ 13.740763] asus-laptop: Asus Laptop Support version 0.42



[ 13.743701] asus-laptop: Error calling BSTS



[ 13.743793] asus-laptop: Z96S model detected



[ 13.756818] Registered led device: asus::mail



[ 13.831795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input6



[ 13.853028] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)



[ 14.000031] ricoh-mmc: Ricoh MMC Controller disabling driver



[ 14.000035] ricoh-mmc: Copyright(c) Philip Langdale



[ 14.000075] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 12)



[ 14.000098] ricoh-mmc: Controller is now disabled.



[ 14.125477] sdhci: Secure Digital Host Controller Interface driver



[ 14.125482] sdhci: Copyright(c) Pierre Ossman



[ 14.232146] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)



[ 14.232165] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17



[ 14.235236] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO



[ 14.531829] nvidia: module license 'NVIDIA' taints kernel.



[ 14.909204] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16



[ 14.909214] nvidia 0000:01:00.0: setting latency timer to 64



[ 14.909438] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008



[ 14.943382] Bluetooth: Core ver 2.13



[ 14.959937] NET: Registered protocol family 31



[ 14.959941] Bluetooth: HCI device and connection manager initialized



[ 14.959946] Bluetooth: HCI socket layer initialized



[ 14.994970] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)



[ 15.084329] input: PC Speaker as /devices/platform/pcspkr/input/input7



[ 15.093068] Bluetooth: Generic Bluetooth USB driver ver 0.3



[ 15.096103] usbcore: registered new interface driver ndiswrapper



[ 15.096133] usbcore: registered new interface driver btusb



[ 15.644670] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008



[ 15.645282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21



[ 15.645319] HDA Intel 0000:00:1b.0: setting latency timer to 64



[ 15.679084] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...



[ 15.687411] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8



[ 16.607193] lp: driver loaded but no devices found



[ 16.788397] Adding 2045944k swap on /dev/sda6. Priority:-1 extents:1 across:2045944k



[ 17.338533] EXT3 FS on sda7, internal journal



[ 18.365300] type=1505 audit(1226061873.939:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4362



[ 18.556460] type=1505 audit(1226061874.127:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4367



[ 18.556701] type=1505 audit(1226061874.127:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4367



[ 18.724193] ip_tables: (C) 2000-2006 Netfilter Core Team



[ 19.355108] ACPI: WMI: Mapper loaded



[ 20.443495] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)



[ 20.502524] apm: BIOS not found.



[ 20.684705] ppdev: user-space parallel port driver



[ 23.009611] Bluetooth: L2CAP ver 2.11



[ 23.009627] Bluetooth: L2CAP socket layer initialized



[ 23.048292] Bluetooth: BNEP (Ethernet Emulation) ver 1.3



[ 23.048307] Bluetooth: BNEP filters: protocol multicast



[ 23.090071] Bridge firewalling registered



[ 23.090355] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.



[ 23.109888] Bluetooth: SCO (Voice Link) ver 0.6



[ 23.109902] Bluetooth: SCO socket layer initialized



[ 23.171194] Bluetooth: RFCOMM socket layer initialized



[ 23.171226] Bluetooth: RFCOMM TTY layer initialized



[ 23.171232] Bluetooth: RFCOMM ver 1.10



[ 28.164652] r8169: eth0: link down



[ 28.593126] usb 3-4: USB disconnect, address 2



[ 87.314013] CPU0 attaching NULL sched-domain.



[ 87.314039] CPU1 attaching NULL sched-domain.



[ 87.322649] CPU0 attaching sched-domain:



[ 87.322663] domain 0: span 0-1 level MC



[ 87.322670] groups: 0 1



[ 87.322684] CPU1 attaching sched-domain:



[ 87.322690] domain 0: span 0-1 level MC



[ 87.322696] groups: 1 0



[ 145.118644] usbcore: registered new interface driver rtl8187

preterax · Le 07/11/2008, à 18:41

Le module a bien été chargé mais il n'a pas detecté la carte wifi?
T'as carte wifi est intégrée à l'ordi?
Sinon essaie de blacklister ndiswrapper en ajoutant "blacklist ndiswrapper" au fichier /etc/modprobe.d/blacklist et reboot.

Snaypse · Le 07/11/2008, à 19:08

je doit taper a chaque reboote sudo modprobe rtl8187 pour que le module se charge et aparaisse dans le dmesg.
oui ma carte wifi est intégrée et elle est branchée en usb a la carte mère.
j'ai ajouté blacklist ndiswrapper au dis fichier mais ça rien changé, d'ailleur c'est quoi le but de blacklister ndiswrapper?

Snaypse · Le 07/11/2008, à 22:44

lsmod montre bien ma carte mais elle n'est toujours pas détecté en tant que carte wifi, quelqu'un a une idée?:rolleyes:

snaypse@snaypse-laptop:~/linux$ lsmod
Module                  Size  Used by
rtl8187                53120  0 
mac80211              216820  1 rtl8187
eeprom_93cx6           10240  1 rtl8187
cfg80211               32392  2 rtl8187,mac80211
ipv6                  263972  10 
af_packet              25728  2 
binfmt_misc            16904  1 
rfcomm                 44432  2 
sco                    18308  2 
bridge                 56980  0 
stp                    10628  1 bridge
bnep                   20480  2 
l2cap                  30464  16 rfcomm,bnep
ppdev                  15620  0 
acpi_cpufreq           15500  1 
cpufreq_powersave       9856  0 
cpufreq_ondemand       14988  1 
cpufreq_userspace      11396  0 
cpufreq_stats          13188  0 
cpufreq_conservative    14600  0 
freq_table             12672  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
sbs                    19464  0 
sbshc                  13440  1 sbs
container              11520  0 
wmi                    14504  0 
pci_slot               12552  0 
iptable_filter         10752  0 
ip_tables              19600  1 iptable_filter
x_tables               22916  1 ip_tables
sbp2                   29324  0 
parport_pc             39204  0 
lp                     17156  0 
parport                42604  3 ppdev,parport_pc,lp
joydev                 18368  0 
snd_hda_intel         381488  3 
snd_pcm_oss            46848  0 
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10884  0 
snd_seq_oss            38528  0 
sdhci_pci              15360  0 
sdhci                  23940  1 sdhci_pci
btusb                  19736  3 
pcspkr                 10624  0 
mmc_core               58268  1 sdhci
snd_seq_midi           14336  0 
evdev                  17696  10 
ricoh_mmc              11904  0 
bluetooth              61924  11 rfcomm,sco,bnep,l2cap,btusb
serio_raw              13444  0 
nvidia               6900560  38 
psmouse                45200  0 
snd_rawmidi            29824  1 snd_seq_midi
i2c_core               31892  1 nvidia
video                  25104  5 
output                 11008  1 video
snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device         15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63268  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery                18436  0 
ac                     12292  0 
asus_laptop            24440  0 
led_class              12164  1 asus_laptop
intel_agp              33724  0 
soundcore              15328  1 snd
button                 14224  0 
agpgart                42184  2 nvidia,intel_agp
snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
iTCO_wdt               18596  0 
iTCO_vendor_support    11652  1 iTCO_wdt
shpchp                 37908  0 
pci_hotplug            35236  1 shpchp
ext3                  133384  1 
jbd                    55444  1 ext3
mbcache                16004  1 ext3
sd_mod                 42264  4 
crc_t10dif              9984  1 sd_mod
sr_mod                 22212  0 
cdrom                  43168  1 sr_mod
sg                     39732  0 
pata_acpi              12160  0 
ata_generic            12932  0 
ata_piix               24580  3 
libata                177312  3 pata_acpi,ata_generic,ata_piix
scsi_mod              155212  5 sbp2,sd_mod,sr_mod,sg,libata
ohci1394               37936  0 
r8169                  35972  0 
dock                   16656  1 libata
ieee1394               96324  2 sbp2,ohci1394
ehci_hcd               43276  0 
uhci_hcd               30736  0 
usbcore               148848  5 rtl8187,btusb,ehci_hcd,uhci_hcd
thermal                23708  0 
processor              42156  4 acpi_cpufreq,thermal
fan                    12548  0 
fbcon                  47648  0 
tileblit               10880  1 fbcon
font                   16512  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
fuse                   60828  5

preterax · Le 08/11/2008, à 14:50

Le but de blacklister ndiswrapper est d'éviter "d'éventuelles" conflits avec le modules rtl8187.
J'ai regarder les sources du module rtl8187 et il se trouve que l'ID 0b05:1712 (affiché par lsusb) ne figure pas dedans.
Ca explique pourquoi t'as carte n'est pas détectée mais normalement elle devrait fonctionner avec ce driver vu que c'est le même chipset.
En conclusion il faudrait modifier les sources du module.
On télécharge les sources http://wireless.kernel.org/download/com … .6.tar.bz2

tar xjvf compat-wireless-2.6.tar.bz2
cd compat-wireless-2008-11-01

puis on édite le code source et on rajoute l'ID de la carte ({USB_DEVICE(0x0b05, 0x1712), .driver_info = DEVICE_RTL8187B},):

gedit drivers/net/wireless/rtl8187_dev.c

/*
 * Linux device driver for RTL8187
 *
 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
 *
 * Based on the r8187 driver, which is:
 * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
 *
 * Magic delays and register offsets below are taken from the original
 * r8187 driver sources.  Thanks to Realtek for their support!
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
#include <net/mac80211.h>

#include "rtl8187.h"
#include "rtl8187_rtl8225.h"

MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
MODULE_LICENSE("GPL");

static struct usb_device_id rtl8187_table[] __devinitdata = {
	/* Asus */
	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0b05, 0x1712), .driver_info = DEVICE_RTL8187B},
	/* Belkin */
	{USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
	/* Realtek */
	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
	{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
	{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
	/* Netgear */
	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
	/* HP */
	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
	/* Sitecom */
	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
	{}
};

Ensuite on compil:

sudo apt-get install build-essential linux-headers-2.6.27-7-generic

make

sudo make install

On decharge l'ancien module

sudo rmmod rtl8187

Pour finir on charge le nouveau module

sudo modprobe rtl8187

Dernière modification par preterax (Le 08/11/2008, à 22:15)

Snaypse · Le 10/11/2008, à 23:20

J'ai suivie la procédure a la lettre mais il y a eu des erreurs, la 1ere quand j'ai dechargé l'ancien module:

ERROR: Module rtl8187 does not exist in /proc/modules

peut etre parce que je n'avais pas chargé le module auparavant, car comme je l'est dis présédament, je doit chargé a chaque démarage d'ubuntu.
La deuxième erreur:

FATAL: Error inserting rtl8187 (/lib/modules/2.6.27-7-generic/updates/drivers/net/wireless/rtl8187.ko): Unknown symbol in module, or unknown parameter (see dmesg)

J'ai fais un dmesg comme signalé dans l'erreur et a la fin du rapport il y avait:

[ 1258.525854] rtl8187: Unknown symbol rtl8187_write_phy

Au final, elle n'est toujours pas reconnue et n'apparais pas dans lsusb.:(

dmesg

[ 0.597046] pci 0000:06:01.1: supports D2

[ 0.597048] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.597054] pci 0000:06:01.1: PME# disabled

[ 0.597088] PCI: 0000:06:01.2 reg 10 32bit mmio: [fbfff400, fbfff4ff]

[ 0.597141] pci 0000:06:01.2: supports D1

[ 0.597143] pci 0000:06:01.2: supports D2

[ 0.597145] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.597151] pci 0000:06:01.2: PME# disabled

[ 0.597185] PCI: 0000:06:01.3 reg 10 32bit mmio: [fbfff800, fbfff8ff]

[ 0.597238] pci 0000:06:01.3: supports D1

[ 0.597240] pci 0000:06:01.3: supports D2

[ 0.597242] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.597248] pci 0000:06:01.3: PME# disabled

[ 0.597282] PCI: 0000:06:01.4 reg 10 32bit mmio: [fbfffc00, fbfffcff]

[ 0.597334] pci 0000:06:01.4: supports D1

[ 0.597336] pci 0000:06:01.4: supports D2

[ 0.597339] pci 0000:06:01.4: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.597344] pci 0000:06:01.4: PME# disabled

[ 0.597391] PCI: 0000:06:07.0 reg 10 io port: [e800, e8ff]

[ 0.597399] PCI: 0000:06:07.0 reg 14 32bit mmio: [fbffe400, fbffe4ff]

[ 0.597432] PCI: 0000:06:07.0 reg 30 32bit mmio: [fbfc0000, fbfdffff]

[ 0.597449] pci 0000:06:07.0: supports D1

[ 0.597451] pci 0000:06:07.0: supports D2

[ 0.597453] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold

[ 0.597459] pci 0000:06:07.0: PME# disabled

[ 0.597499] pci 0000:00:1e.0: transparent bridge

[ 0.597503] PCI: bridge 0000:00:1e.0 io port: [e000, efff]

[ 0.597508] PCI: bridge 0000:00:1e.0 32bit mmio: [fbf00000, fbffffff]

[ 0.597541] bus 00 -> node 0

[ 0.597550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.597859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 0.598040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 0.598185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

[ 0.598331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]

[ 0.652428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.652428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)

[ 0.652551] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.652726] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 0.652900] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.653076] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)

[ 0.653249] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.653423] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)

[ 0.653514] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 0.653514] pnp: PnP ACPI init

[ 0.653514] ACPI: bus type pnp registered

[ 0.657159] pnp: PnP ACPI: found 13 devices

[ 0.657162] ACPI: ACPI bus type pnp unregistered

[ 0.657167] PnPBIOS: Disabled by ACPI PNP

[ 0.660065] PCI: Using ACPI for IRQ routing

[ 0.664044] NET: Registered protocol family 8

[ 0.664048] NET: Registered protocol family 20

[ 0.664075] NetLabel: Initializing

[ 0.664075] NetLabel: domain hash size = 128

[ 0.664075] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.664075] NetLabel: unlabeled traffic allowed by default

[ 0.664075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.664075] hpet0: 3 64-bit timers, 14318180 Hz

[ 0.665618] tracer: 772 pages allocated for 65536 entries of 48 bytes

[ 0.665622] actual entries 65620

[ 0.665739] AppArmor: AppArmor Filesystem Enabled

[ 0.665762] ACPI: RTC can wake from S4

[ 0.668042] Switched to high resolution mode on CPU 0

[ 0.668476] Switched to high resolution mode on CPU 1

[ 0.668499] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

[ 0.668514] system 00:08: ioport range 0x25c-0x25f has been reserved

[ 0.668518] system 00:08: ioport range 0x4d0-0x4d1 has been reserved

[ 0.668522] system 00:08: ioport range 0x800-0x87f has been reserved

[ 0.668525] system 00:08: ioport range 0x500-0x53f has been reserved

[ 0.668529] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 0.668532] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved

[ 0.668536] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved

[ 0.668539] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved

[ 0.668543] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved

[ 0.668552] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved

[ 0.668556] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved

[ 0.668562] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved

[ 0.668570] system 00:0c: iomem range 0x0-0x9ffff could not be reserved

[ 0.668573] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved

[ 0.668577] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved

[ 0.668580] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved

[ 0.703754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.703758] pci 0000:00:01.0: IO window: 0xc000-0xcfff

[ 0.703764] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff

[ 0.703768] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff

[ 0.703775] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05

[ 0.703777] pci 0000:00:1c.0: IO window: disabled

[ 0.703783] pci 0000:00:1c.0: MEM window: disabled

[ 0.703788] pci 0000:00:1c.0: PREFETCH window: disabled

[ 0.703795] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04

[ 0.703797] pci 0000:00:1c.1: IO window: disabled

[ 0.703803] pci 0000:00:1c.1: MEM window: disabled

[ 0.703808] pci 0000:00:1c.1: PREFETCH window: disabled

[ 0.703815] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02

[ 0.703819] pci 0000:00:1c.2: IO window: 0xd000-0xdfff

[ 0.703825] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff

[ 0.703830] pci 0000:00:1c.2: PREFETCH window: 0x000000dc000000-0x000000dfffffff

[ 0.703839] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06

[ 0.703843] pci 0000:00:1e.0: IO window: 0xe000-0xefff

[ 0.703850] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff

[ 0.703855] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff

[ 0.703875] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.703881] pci 0000:00:01.0: setting latency timer to 64

[ 0.703891] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 0.703896] pci 0000:00:1c.0: setting latency timer to 64

[ 0.703905] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23

[ 0.703910] pci 0000:00:1c.1: setting latency timer to 64

[ 0.703920] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.703925] pci 0000:00:1c.2: setting latency timer to 64

[ 0.703933] pci 0000:00:1e.0: setting latency timer to 64

[ 0.703938] bus: 00 index 0 io port: [0, ffff]

[ 0.703940] bus: 00 index 1 mmio: [0, ffffffff]

[ 0.703943] bus: 01 index 0 io port: [c000, cfff]

[ 0.703945] bus: 01 index 1 mmio: [f4000000, f7ffffff]

[ 0.703948] bus: 01 index 2 mmio: [c0000000, cfffffff]

[ 0.703950] bus: 01 index 3 mmio: [0, 0]

[ 0.703952] bus: 05 index 0 mmio: [0, 0]

[ 0.703954] bus: 05 index 1 mmio: [0, 0]

[ 0.703956] bus: 05 index 2 mmio: [0, 0]

[ 0.703959] bus: 05 index 3 mmio: [0, 0]

[ 0.703961] bus: 04 index 0 mmio: [0, 0]

[ 0.703963] bus: 04 index 1 mmio: [0, 0]

[ 0.703965] bus: 04 index 2 mmio: [0, 0]

[ 0.703967] bus: 04 index 3 mmio: [0, 0]

[ 0.703970] bus: 02 index 0 io port: [d000, dfff]

[ 0.703972] bus: 02 index 1 mmio: [f8000000, fbefffff]

[ 0.703974] bus: 02 index 2 mmio: [dc000000, dfffffff]

[ 0.703977] bus: 02 index 3 mmio: [0, 0]

[ 0.703979] bus: 06 index 0 io port: [e000, efff]

[ 0.703981] bus: 06 index 1 mmio: [fbf00000, fbffffff]

[ 0.703984] bus: 06 index 2 mmio: [d0000000, d00fffff]

[ 0.703986] bus: 06 index 3 io port: [0, ffff]

[ 0.703988] bus: 06 index 4 mmio: [0, ffffffff]

[ 0.703999] NET: Registered protocol family 2

[ 0.717059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.717348] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.717857] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.718210] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.718214] TCP reno registered

[ 0.721124] NET: Registered protocol family 1

[ 0.721266] checking if image is initramfs... it is

[ 1.513733] Freeing initrd memory: 7990k freed

[ 1.515006] audit: initializing netlink socket (disabled)

[ 1.515024] type=2000 audit(1226339476.512:1): initialized

[ 1.521822] highmem bounce pool size: 64 pages

[ 1.521829] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 1.524420] VFS: Disk quotas dquot_6.5.1

[ 1.524527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1.524647] msgmni has been set to 1725

[ 1.524790] io scheduler noop registered

[ 1.524794] io scheduler anticipatory registered

[ 1.524797] io scheduler deadline registered

[ 1.524811] io scheduler cfq registered (default)

[ 1.524960] pci 0000:01:00.0: Boot video device

[ 1.525119] pcieport-driver 0000:00:01.0: setting latency timer to 64

[ 1.525167] pcieport-driver 0000:00:01.0: found MSI capability

[ 1.525207] pci_express 0000:00:01.0:pcie00: allocate port service

[ 1.525262] pci_express 0000:00:01.0:pcie02: allocate port service

[ 1.525309] pci_express 0000:00:01.0:pcie03: allocate port service

[ 1.525415] pcieport-driver 0000:00:1c.0: setting latency timer to 64

[ 1.525457] pcieport-driver 0000:00:1c.0: found MSI capability

[ 1.525499] pci_express 0000:00:1c.0:pcie00: allocate port service

[ 1.525548] pci_express 0000:00:1c.0:pcie02: allocate port service

[ 1.525595] pci_express 0000:00:1c.0:pcie03: allocate port service

[ 1.525707] pcieport-driver 0000:00:1c.1: setting latency timer to 64

[ 1.525748] pcieport-driver 0000:00:1c.1: found MSI capability

[ 1.525791] pci_express 0000:00:1c.1:pcie00: allocate port service

[ 1.525839] pci_express 0000:00:1c.1:pcie02: allocate port service

[ 1.525886] pci_express 0000:00:1c.1:pcie03: allocate port service

[ 1.525993] pcieport-driver 0000:00:1c.2: setting latency timer to 64

[ 1.526034] pcieport-driver 0000:00:1c.2: found MSI capability

[ 1.526075] pci_express 0000:00:1c.2:pcie00: allocate port service

[ 1.526124] pci_express 0000:00:1c.2:pcie02: allocate port service

[ 1.526171] pci_express 0000:00:1c.2:pcie03: allocate port service

[ 1.526571] isapnp: Scanning for PnP cards...

[ 1.879764] isapnp: No Plug & Play device found

[ 1.917066] hpet_resources: 0xfed00000 is busy

[ 1.917173] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

[ 1.919781] brd: module loaded

[ 1.919863] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 1.920022] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 1.922548] i8042.c: Detected active multiplexing controller, rev 1.1.

[ 1.923189] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.923195] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[ 1.923198] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[ 1.923201] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[ 1.923204] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[ 1.924151] mice: PS/2 mouse device common for all mice

[ 1.924313] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 1.924342] rtc0: alarms up to one month, y3k, hpet irqs

[ 1.924493] EISA: Probing bus 0 at eisa.0

[ 1.924525] EISA: Detected 0 cards.

[ 1.924529] cpuidle: using governor ladder

[ 1.924532] cpuidle: using governor menu

[ 1.925125] TCP cubic registered

[ 1.925159] Using IPI No-Shortcut mode

[ 1.925366] registered taskstats version 1

[ 1.925525] Magic number: 0:923:895

[ 1.925587] tty ptyy5: hash matches

[ 1.925671] rtc_cmos 00:03: setting system clock to 2008-11-10 17:51:17 UTC (1226339477)

[ 1.925675] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.925677] EDD information not available.

[ 1.925925] Freeing unused kernel memory: 424k freed

[ 1.925968] Write protecting the kernel text: 2576k

[ 1.925998] Write protecting the kernel read-only data: 936k

[ 1.956371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 2.085191] fuse init (API version 7.9)

[ 2.143824] ACPI: SSDT BFF9E0B0, 08FE (r1 AMI CPU1PM 1 INTL 20060113)

[ 2.144644] ACPI: CPU0 (power states: C1[C1] C2[C2])

[ 2.144718] processor ACPI0007:00: registered as cooling_device0

[ 2.145049] ACPI: SSDT BFF9E9B0, 0120 (r1 AMI CPU2PM 1 INTL 20060113)

[ 2.148005] Marking TSC unstable due to TSC halts in idle

[ 2.160176] ACPI: CPU1 (power states: C1[C1] C2[C2])

[ 2.160239] processor ACPI0007:01: registered as cooling_device1

[ 2.163920] thermal LNXTHERM:01: registered as thermal_zone0

[ 2.165149] ACPI: Thermal Zone [TZ00] (56 C)

[ 2.625412] usbcore: registered new interface driver usbfs

[ 2.625441] usbcore: registered new interface driver hub

[ 2.625497] usbcore: registered new device driver usb

[ 2.637925] USB Universal Host Controller Interface driver v3.0

[ 2.640910] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 2.640926] uhci_hcd 0000:00:1a.0: setting latency timer to 64

[ 2.640930] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 2.640985] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 2.641026] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880

[ 2.641189] usb usb1: configuration #1 chosen from 1 choice

[ 2.641221] hub 1-0:1.0: USB hub found

[ 2.641236] hub 1-0:1.0: 2 ports detected

[ 2.713150] No dock devices found.

[ 2.748330] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 2.748344] uhci_hcd 0000:00:1a.1: setting latency timer to 64

[ 2.748551] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 2.748581] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[ 2.748626] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00

[ 2.748736] usb usb2: configuration #1 chosen from 1 choice

[ 2.748767] hub 2-0:1.0: USB hub found

[ 2.748775] hub 2-0:1.0: 2 ports detected

[ 2.764100] SCSI subsystem initialized

[ 2.880104] libata version 3.00 loaded.

[ 2.956384] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 2.956403] ehci_hcd 0000:00:1a.7: setting latency timer to 64

[ 2.956408] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 2.956439] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3

[ 2.960363] ehci_hcd 0000:00:1a.7: debug port 1

[ 2.960371] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported

[ 2.960387] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00

[ 3.157109] usb 2-2: new full speed USB device using uhci_hcd and address 2

[ 3.172025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 3.172214] usb usb3: configuration #1 chosen from 1 choice

[ 3.172248] hub 3-0:1.0: USB hub found

[ 3.172259] hub 3-0:1.0: 4 ports detected

[ 3.226191] hub 2-0:1.0: unable to enumerate USB device on port 2

[ 3.376388] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 3.376400] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 3.376404] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 3.376436] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4

[ 3.376473] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400

[ 3.376589] usb usb4: configuration #1 chosen from 1 choice

[ 3.376623] hub 4-0:1.0: USB hub found

[ 3.376632] hub 4-0:1.0: 2 ports detected

[ 3.484600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 3.484610] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 3.484614] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 3.484660] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5

[ 3.484698] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480

[ 3.484815] usb usb5: configuration #1 chosen from 1 choice

[ 3.484846] hub 5-0:1.0: USB hub found

[ 3.484854] hub 5-0:1.0: 2 ports detected

[ 3.493033] usb 3-4: new high speed USB device using ehci_hcd and address 2

[ 3.584686] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 3.584696] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 3.584700] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 3.584737] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6

[ 3.584766] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800

[ 3.584885] usb usb6: configuration #1 chosen from 1 choice

[ 3.584917] hub 6-0:1.0: USB hub found

[ 3.584925] hub 6-0:1.0: 2 ports detected

[ 3.632069] usb 3-4: configuration #1 chosen from 1 choice

[ 3.796797] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 3.796814] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 3.796818] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 3.796856] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7

[ 3.800761] ehci_hcd 0000:00:1d.7: debug port 1

[ 3.800769] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

[ 3.800777] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800

[ 3.904034] usb 6-1: new full speed USB device using uhci_hcd and address 2

[ 3.916031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 3.916477] usb usb7: configuration #1 chosen from 1 choice

[ 3.916771] hub 7-0:1.0: USB hub found

[ 3.916782] hub 7-0:1.0: 6 ports detected

[ 3.972065] hub 6-0:1.0: unable to enumerate USB device on port 1

[ 4.127064] ata_piix 0000:00:1f.1: version 2.12

[ 4.127080] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 4.127131] ata_piix 0000:00:1f.1: setting latency timer to 64

[ 4.127228] scsi0 : ata_piix

[ 4.127349] scsi1 : ata_piix

[ 4.129055] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[ 4.129059] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[ 4.348036] usb 7-6: new high speed USB device using ehci_hcd and address 3

[ 4.540406] ata1.01: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33

[ 4.569097] usb 7-6: configuration #1 chosen from 1 choice

[ 4.580339] ata1.01: configured for UDMA/33

[ 4.580404] ata2: port disabled. ignoring.

[ 4.582735] scsi 0:0:1:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5

[ 4.582893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18

[ 4.582899] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 4.736061] ata_piix 0000:00:1f.2: setting latency timer to 64

[ 4.736126] scsi2 : ata_piix

[ 4.736520] scsi3 : ata_piix

[ 4.739730] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18

[ 4.739737] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18

[ 4.808031] usb 6-1: new full speed USB device using uhci_hcd and address 3

[ 5.054261] usb 6-1: configuration #1 chosen from 1 choice

[ 5.212103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 5.222074] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7

[ 5.222078] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 5.238074] ata3.00: configured for UDMA/133

[ 5.566871] ata4: SATA link down (SStatus 0 SControl 0)

[ 5.567008] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5

[ 5.567159] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 5.567179] r8169 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 5.567518] eth0: RTL8169sc/8110sc at 0xf883c400, 00:1e:8c:32:d9:de, XID 18000000 IRQ 18

[ 5.568245] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 5.619978] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4]

[ 5.645221] scsi 0:0:1:0: Attached scsi generic sg0 type 5

[ 5.645264] scsi 2:0:0:0: Attached scsi generic sg1 type 0

[ 5.667826] Driver 'sr' needs updating - please use bus_type methods

[ 5.681603] Driver 'sd' needs updating - please use bus_type methods

[ 5.683847] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 5.683852] Uniform CD-ROM driver Revision: 3.20

[ 5.683964] sr 0:0:1:0: Attached scsi CD-ROM sr0

[ 5.684222] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[ 5.684245] sd 2:0:0:0: [sda] Write Protect is off

[ 5.684248] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 5.684284] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 5.684375] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[ 5.684395] sd 2:0:0:0: [sda] Write Protect is off

[ 5.684399] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 5.684436] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 5.684441] sda: sda1 sda2 < sda5 sda6 sda7 >

[ 6.339899] sd 2:0:0:0: [sda] Attached SCSI disk

[ 6.704164] PM: Starting manual resume from disk

[ 6.704169] PM: Resume from partition 8:6

[ 6.704171] PM: Checking hibernation image.

[ 6.704388] PM: Resume from disk failed.

[ 6.752832] kjournald starting. Commit interval 5 seconds

[ 6.752854] EXT3-fs: mounted filesystem with ordered data mode.

[ 6.892174] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008c1e00e39c0e00]

[ 13.221270] udevd version 124 started

[ 13.938619] iTCO_vendor_support: vendor-support=0

[ 13.984236] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)

[ 13.984865] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware

[ 13.984885] iTCO_wdt: No card detected

[ 14.071839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 14.104723] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 14.188626] Linux agpgart interface v0.103

[ 14.264318] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 14.281042] ACPI: Power Button (FF) [PWRF]

[ 14.281187] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3

[ 14.282907] ACPI: Lid Switch [LID]

[ 14.282982] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4

[ 14.313040] ACPI: Sleep Button (CM) [SLPB]

[ 14.313140] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5

[ 14.345030] ACPI: Power Button (CM) [PWRB]

[ 14.406182] asus-laptop: Asus Laptop Support version 0.42

[ 14.409045] asus-laptop: Error calling BSTS

[ 14.409138] asus-laptop: Z96S model detected

[ 14.421063] Registered led device: asus::mail

[ 14.567800] ACPI: AC Adapter [AC0] (on-line)

[ 14.579607] ricoh-mmc: Ricoh MMC Controller disabling driver

[ 14.579611] ricoh-mmc: Copyright(c) Philip Langdale

[ 14.580136] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 12)

[ 14.580160] ricoh-mmc: Controller is now disabled.

[ 14.586552] ACPI: Battery Slot [BAT0] (battery absent)

[ 14.621379] sdhci: Secure Digital Host Controller Interface driver

[ 14.621383] sdhci: Copyright(c) Pierre Ossman

[ 14.685568] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22)

[ 14.685586] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 14.688651] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO

[ 14.752143] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input6

[ 14.781042] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[ 15.239736] nvidia: module license 'NVIDIA' taints kernel.

[ 15.543325] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 15.543335] nvidia 0000:01:00.0: setting latency timer to 64

[ 15.551748] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008

[ 15.551871] Bluetooth: Core ver 2.13

[ 15.562595] NET: Registered protocol family 31

[ 15.562599] Bluetooth: HCI device and connection manager initialized

[ 15.562604] Bluetooth: HCI socket layer initialized

[ 15.617184] Bluetooth: Generic Bluetooth USB driver ver 0.3

[ 15.618313] usbcore: registered new interface driver btusb

[ 15.636166] input: PC Speaker as /devices/platform/pcspkr/input/input7

[ 15.734236] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008

[ 15.775500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8

[ 16.228858] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

[ 16.228896] HDA Intel 0000:00:1b.0: setting latency timer to 64

[ 16.262977] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

[ 17.235472] lp: driver loaded but no devices found

[ 17.427271] Adding 2045944k swap on /dev/sda6. Priority:-1 extents:1 across:2045944k

[ 17.977114] EXT3 FS on sda7, internal journal

[ 19.037804] type=1505 audit(1226335894.961:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4337

[ 19.232233] type=1505 audit(1226335895.157:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4342

[ 19.232460] type=1505 audit(1226335895.157:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4342

[ 19.385598] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 20.016278] ACPI: WMI: Mapper loaded

[ 21.049083] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)

[ 21.119202] apm: BIOS not found.

[ 21.300972] ppdev: user-space parallel port driver

[ 23.692245] Bluetooth: L2CAP ver 2.11

[ 23.692260] Bluetooth: L2CAP socket layer initialized

[ 23.753513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 23.753529] Bluetooth: BNEP filters: protocol multicast

[ 23.806280] Bridge firewalling registered

[ 23.806940] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

[ 23.828098] Bluetooth: RFCOMM socket layer initialized

[ 23.828127] Bluetooth: RFCOMM TTY layer initialized

[ 23.828133] Bluetooth: RFCOMM ver 1.10

[ 23.839478] Bluetooth: SCO (Voice Link) ver 0.6

[ 23.839491] Bluetooth: SCO socket layer initialized

[ 28.771658] r8169: eth0: link down

[ 28.947977] usb 3-4: USB disconnect, address 2

[ 85.182587] canberra-gtk-pl[5774]: segfault at 4a599e50 ip b705c84d sp b6df9f10 error 6 in libpulse.so.0.4.1[b701d000+4e000]

[ 89.934889] CPU0 attaching NULL sched-domain.

[ 89.934910] CPU1 attaching NULL sched-domain.

[ 89.938220] CPU0 attaching sched-domain:

[ 89.938233] domain 0: span 0-1 level MC

[ 89.938240] groups: 0 1

[ 89.938253] CPU1 attaching sched-domain:

[ 89.938258] domain 0: span 0-1 level MC

[ 89.938264] groups: 1 0

[ 160.045466] NET: Registered protocol family 10

[ 160.046105] lo: Disabled Privacy Extensions

[ 160.046792] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 728.061012] CPU0 attaching NULL sched-domain.

[ 728.061027] CPU1 attaching NULL sched-domain.

[ 728.065084] CPU0 attaching sched-domain:

[ 728.065090] domain 0: span 0-1 level MC

[ 728.065093] groups: 0 1

[ 728.065099] domain 1: span 0-1 level CPU

[ 728.065101] groups: 0-1

[ 728.065106] CPU1 attaching sched-domain:

[ 728.065109] domain 0: span 0-1 level MC

[ 728.065111] groups: 1 0

[ 728.065116] domain 1: span 0-1 level CPU

[ 728.065118] groups: 0-1

[ 765.785556] r8169: eth0: link up

[ 765.785977] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 765.889232] NET: Registered protocol family 17

[ 776.776029] eth0: no IPv6 routers present

[ 1194.186366] r8169: eth0: link down

[ 1258.517147] cfg80211: Using static regulatory domain info

[ 1258.517161] cfg80211: Regulatory domain: US

[ 1258.517166] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 1258.517173] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

[ 1258.517179] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 1258.517186] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 1258.517192] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 1258.517198] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 1258.517204] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

[ 1258.517210] cfg80211: Calling CRDA for country: US

[ 1258.525854] rtl8187: Unknown symbol rtl8187_write_phy

Dernière modification par Snaypse (Le 10/11/2008, à 23:22)

preterax · Le 10/11/2008, à 23:35

Essaie de rebooter en ajoutant rtl8189 à /etc/modules.
L'erreur est peut être due à un conflit avec un ancien module chargée en mémoire.
Ta version d'Ubuntu est une 32bits ou 64bits?
Et la version du kernel? (uname -r)

Snaypse · Le 10/11/2008, à 23:56

ça n'as pas marché en ajoutant rtl8189 (ou 8187 vue que c'est ma carte), sinon j'ai le noyau 2.6.27-7-generic version 32 bits.

preterax · Le 11/11/2008, à 11:17

Oui c'était rtl8187 et non rtl8189:rolleyes:
Par contre je ne vois pas ce qui cloche.
Peut -être un conflit de module.
Peut-tu me dire ce qu'affiche:

modinfo rtl8187
modinfo mac80211
modinfo cfg80211
modinfo eeprom_93cx6

Ainsi que

sudo lshw -C network

Sinon, rien n'a été rajouté dans /etc/modprobe.d/blacklist (sauf ndiswrapper)?

Snaypse · Le 11/11/2008, à 18:10

snaypse@snaypse-laptop:~$ modinfo rtl8187 

modinfo:could not open rtl8187: No such device 

snaypse@snaypse-laptop:~$ modinfo mac80211 

filename: /lib/modules/2.6.27-7-generic/updates/net/mac80211/mac80211.ko 

license: GPL 

description: IEEE 802.11 subsystem 

srcversion: 244A86807FE2B151E6A9164 

depends: cfg80211 

vermagic: 2.6.27-7-generic SMP mod_unload modversions 586 

parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp) 

snaypse@snaypse-laptop:~$ modinfo cfg80211 

filename: /lib/modules/2.6.27-7-generic/updates/net/wireless/cfg80211.ko 

description: wireless configuration support 

license: GPL 

author: Johannes Berg 

srcversion: 499572D1DBB3256358C7955 

depends: 

vermagic: 2.6.27-7-generic SMP mod_unload modversions 586 

parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp) 

snaypse@snaypse-laptop:~$ modinfo eeprom_93cx6 

filename: /lib/modules/2.6.27-7-generic/updates/drivers/misc/eeprom_93cx6.ko 

license: GPL 

description: EEPROM 93cx6 chip driver 

version: 1.0 

author: http://rt2x00.serialmonkey.com 

srcversion: B0E08119EEE31CFCE1C0A01 

depends: 

vermagic: 2.6.27-7-generic SMP mod_unload modversions 586 

snaypse@snaypse-laptop:~$ sudo lshw -C network 

[sudo] password for snaypse: 

*-network 

description: Ethernet interface 

product: RTL-8110SC/8169SC Gigabit Ethernet 

vendor: Realtek Semiconductor Co., Ltd. 

physical id: 7 

bus info: pci@0000:06:07.0 

logical name: eth0 

version: 10 

serial: 00:1e:8c:32:d9:de 

size: 10MB/s 

capacity: 1GB/s 

width: 32 bits 

clock: 66MHz 

capabilities: pm bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation 

configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=64 link=no maxlatency=64 mingnt=32 module=r8169 multicast=yes port=twisted pair speed=10MB/s 

*-network DISABLED 

description: Ethernet interface 

physical id: 1 

logical name: pan0 

serial: ba:54:de:66:60:75 

capabilities: ethernet physical 

configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

Je n'est pas toucher a "/etc/modprobe.d/blacklist" a part ndiswrapper. Moi même je ne vois pas ou est le problème car le voyant s'allume durant le démarage d'ubuntu ensuite il s'éteint ...

Dernière modification par Snaypse (Le 11/11/2008, à 18:11)

preterax · Le 12/11/2008, à 16:03

Etrange que modinfo ne trouve pas le module rtl8187.
Que renvoie la commande :

find /lib/modules -name rtl8187.ko

Supprime aussi le module ndiswrapper dans /etc/modules car blacklister le module ne suffit peut être pas.

Au fait peux-tu me dire quel modèle d'ordinateur il s'agit? Asus Z96S?
Dans le manuel il doit y avoir la référence de la carte wifi aussi ou plus simplement elle est détectée sous quel nom sous window.

Dernière modification par preterax (Le 12/11/2008, à 16:41)

preterax · Le 12/11/2008, à 17:32

Bon en fin de compte je viens de m'apercevoir que je me suis planté.
Désinstalle les drivers que tu as compilé

cd compat-wireless-2008-11-01
sudo make uninstall

Ensuite reboot puis tape ces commandes:

chmod 646 /sys/devices/platform/asus-laptop/wlan
echo 1 > /sys/devices/platform/asus-laptop/wlan
lsusb

ceci devrait activer la carte wifi

puis

modprobe rtl8187

et regarde le dmesg pour voir s'il a détecté la carte.

Dernière modification par preterax (Le 12/11/2008, à 17:33)

Snaypse · Le 12/11/2008, à 19:28

J'ai un laptop "Pc by Surcouf", en faite c'est casiment un Asus mais vendu sous une autre marque,la carte mère c'est une Z96s. Sinon, le gestionaire de péréphériques affiche:Realtek RTL8187b wireless 802.11b/g 54Mbps USB2.0 NETWORK ADAPTER.
Je n'est pas enlever Ndiswprapper de la blacklist.
J'ai désinstallé les drivers et tous mais les commandes n'ont pas marchés:

snaypse@snaypse-laptop:~$ chmod 646 /sys/devices/platform/asus-laptop/wlan 

chmod: modification des permissions de `/sys/devices/platform/asus-laptop/wlan': Opération non permise 

snaypse@snaypse-laptop:~$ echo 1 > /sys/devices/platform/asus-laptop/wlan 

bash: /sys/devices/platform/asus-laptop/wlan: Permission non accordée 

snaypse@snaypse-laptop:~$ lsusb 

Bus 007 Device 003: ID 174f:6a51 Syntek 2.0MPixel Web Cam - Asus Z96J, Z96S, S96S 

Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 

Bus 006 Device 003: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter 

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 

snaypse@snaypse-laptop:~$ modprobe rtl8187 

WARNING: Failed to open config file /etc/modprobe.d/blacklist.save.1: Permission denied 

WARNING: Failed to open config file /etc/modprobe.d/blacklist.save: Permission denied 

WARNING: Error inserting cfg80211 (/lib/modules/2.6.27-7-generic/kernel/net/wireless/cfg80211.ko): Operation not permitted 

WARNING: Error inserting eeprom_93cx6 (/lib/modules/2.6.27-7-generic/kernel/drivers/misc/eeprom_93cx6.ko): Operation not permitted 

WARNING: Error inserting mac80211 (/lib/modules/2.6.27-7-generic/kernel/net/mac80211/mac80211.ko): Operation not permitted 

FATAL: Error inserting rtl8187 (/lib/modules/2.6.27-7-generic/kernel/drivers/net/wireless/rtl8187.ko): Operation not permitted 









[ 0.592954] PCI: 0000:00:1d.1 reg 20 io port: [b480, b49f] 

[ 0.592954] PCI: 0000:00:1d.2 reg 20 io port: [b800, b81f] 

[ 0.596088] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f3fff800, f3fffbff] 

[ 0.596143] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold 

[ 0.596149] pci 0000:00:1d.7: PME# disabled 

[ 0.596287] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO 

[ 0.596291] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO 

[ 0.596319] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] 

[ 0.596327] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] 

[ 0.596335] PCI: 0000:00:1f.1 reg 18 io port: [8f0, 8f7] 

[ 0.596343] PCI: 0000:00:1f.1 reg 1c io port: [8f8, 8fb] 

[ 0.596351] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf] 

[ 0.596399] PCI: 0000:00:1f.2 reg 10 io port: [b080, b087] 

[ 0.596406] PCI: 0000:00:1f.2 reg 14 io port: [b000, b003] 

[ 0.596414] PCI: 0000:00:1f.2 reg 18 io port: [ac00, ac07] 

[ 0.596421] PCI: 0000:00:1f.2 reg 1c io port: [a880, a883] 

[ 0.596428] PCI: 0000:00:1f.2 reg 20 io port: [a800, a80f] 

[ 0.596436] PCI: 0000:00:1f.2 reg 24 io port: [a480, a48f] 

[ 0.596457] pci 0000:00:1f.2: PME# supported from D3hot 

[ 0.596462] pci 0000:00:1f.2: PME# disabled 

[ 0.596481] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] 

[ 0.596504] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] 

[ 0.596562] PCI: 0000:01:00.0 reg 10 32bit mmio: [f7000000, f7ffffff] 

[ 0.596569] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff] 

[ 0.596586] PCI: 0000:01:00.0 reg 1c 64bit mmio: [f4000000, f5ffffff] 

[ 0.596594] PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f] 

[ 0.596601] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] 

[ 0.596661] PCI: bridge 0000:00:01.0 io port: [c000, cfff] 

[ 0.596665] PCI: bridge 0000:00:01.0 32bit mmio: [f4000000, f7ffffff] 

[ 0.596671] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] 

[ 0.596833] PCI: bridge 0000:00:1c.2 io port: [d000, dfff] 

[ 0.596838] PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbefffff] 

[ 0.596846] PCI: bridge 0000:00:1c.2 64bit mmio pref: [dc000000, dfffffff] 

[ 0.596888] PCI: 0000:06:01.0 reg 10 32bit mmio: [fbffe800, fbffefff] 

[ 0.596941] pci 0000:06:01.0: supports D1 

[ 0.596943] pci 0000:06:01.0: supports D2 

[ 0.596945] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold 

[ 0.596950] pci 0000:06:01.0: PME# disabled 

[ 0.596985] PCI: 0000:06:01.1 reg 10 32bit mmio: [fbfff400, fbfff4ff] 

[ 0.597037] pci 0000:06:01.1: supports D1 

[ 0.597039] pci 0000:06:01.1: supports D2 

[ 0.597041] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold 

[ 0.597047] pci 0000:06:01.1: PME# disabled 

[ 0.597081] PCI: 0000:06:01.2 reg 10 32bit mmio: [fbfff800, fbfff8ff] 

[ 0.597134] pci 0000:06:01.2: supports D1 

[ 0.597136] pci 0000:06:01.2: supports D2 

[ 0.597138] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold 

[ 0.597144] pci 0000:06:01.2: PME# disabled 

[ 0.597178] PCI: 0000:06:01.3 reg 10 32bit mmio: [fbfffc00, fbfffcff] 

[ 0.597231] pci 0000:06:01.3: supports D1 

[ 0.597233] pci 0000:06:01.3: supports D2 

[ 0.597235] pci 0000:06:01.3: PME# supported from D0 D1 D2 D3hot D3cold 

[ 0.597240] pci 0000:06:01.3: PME# disabled 

[ 0.597288] PCI: 0000:06:07.0 reg 10 io port: [e800, e8ff] 

[ 0.597297] PCI: 0000:06:07.0 reg 14 32bit mmio: [fbfff000, fbfff0ff] 

[ 0.597329] PCI: 0000:06:07.0 reg 30 32bit mmio: [fbfc0000, fbfdffff] 

[ 0.597347] pci 0000:06:07.0: supports D1 

[ 0.597349] pci 0000:06:07.0: supports D2 

[ 0.597351] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold 

[ 0.597356] pci 0000:06:07.0: PME# disabled 

[ 0.597396] pci 0000:00:1e.0: transparent bridge 

[ 0.597401] PCI: bridge 0000:00:1e.0 io port: [e000, efff] 

[ 0.597406] PCI: bridge 0000:00:1e.0 32bit mmio: [fbf00000, fbffffff] 

[ 0.597439] bus 00 -> node 0 

[ 0.597447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 

[ 0.597755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] 

[ 0.597936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] 

[ 0.598080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] 

[ 0.598225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] 

[ 0.652452] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) 

[ 0.652452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15) 

[ 0.652546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) 

[ 0.652724] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) 

[ 0.652898] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. 

[ 0.653074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) 

[ 0.653248] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) 

[ 0.653422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) 

[ 0.653502] Linux Plug and Play Support v0.97 (c) Adam Belay 

[ 0.653502] pnp: PnP ACPI init 

[ 0.653502] ACPI: bus type pnp registered 

[ 0.657168] pnp: PnP ACPI: found 13 devices 

[ 0.657171] ACPI: ACPI bus type pnp unregistered 

[ 0.657176] PnPBIOS: Disabled by ACPI PNP 

[ 0.657585] PCI: Using ACPI for IRQ routing 

[ 0.660059] NET: Registered protocol family 8 

[ 0.660063] NET: Registered protocol family 20 

[ 0.660090] NetLabel: Initializing 

[ 0.660090] NetLabel: domain hash size = 128 

[ 0.660090] NetLabel: protocols = UNLABELED CIPSOv4 

[ 0.660090] NetLabel: unlabeled traffic allowed by default 

[ 0.660090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 

[ 0.660090] hpet0: 3 64-bit timers, 14318180 Hz 

[ 0.661611] tracer: 772 pages allocated for 65536 entries of 48 bytes 

[ 0.661614] actual entries 65620 

[ 0.661734] AppArmor: AppArmor Filesystem Enabled 

[ 0.661758] ACPI: RTC can wake from S4 

[ 0.664041] Switched to high resolution mode on CPU 0 

[ 0.664475] Switched to high resolution mode on CPU 1 

[ 0.664500] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved 

[ 0.664515] system 00:08: ioport range 0x25c-0x25f has been reserved 

[ 0.664519] system 00:08: ioport range 0x4d0-0x4d1 has been reserved 

[ 0.664522] system 00:08: ioport range 0x800-0x87f has been reserved 

[ 0.664526] system 00:08: ioport range 0x500-0x53f has been reserved 

[ 0.664529] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved 

[ 0.664533] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved 

[ 0.664536] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved 

[ 0.664540] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved 

[ 0.664544] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved 

[ 0.664552] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved 

[ 0.664556] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved 

[ 0.664562] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved 

[ 0.664570] system 00:0c: iomem range 0x0-0x9ffff could not be reserved 

[ 0.664574] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved 

[ 0.664577] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved 

[ 0.664580] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved 

[ 0.699755] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 

[ 0.699759] pci 0000:00:01.0: IO window: 0xc000-0xcfff 

[ 0.699764] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff 

[ 0.699769] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff 

[ 0.699775] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 

[ 0.699777] pci 0000:00:1c.0: IO window: disabled 

[ 0.699783] pci 0000:00:1c.0: MEM window: disabled 

[ 0.699788] pci 0000:00:1c.0: PREFETCH window: disabled 

[ 0.699795] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 

[ 0.699798] pci 0000:00:1c.1: IO window: disabled 

[ 0.699803] pci 0000:00:1c.1: MEM window: disabled 

[ 0.699808] pci 0000:00:1c.1: PREFETCH window: disabled 

[ 0.699815] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 

[ 0.699819] pci 0000:00:1c.2: IO window: 0xd000-0xdfff 

[ 0.699826] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff 

[ 0.699831] pci 0000:00:1c.2: PREFETCH window: 0x000000dc000000-0x000000dfffffff 

[ 0.699840] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 

[ 0.699844] pci 0000:00:1e.0: IO window: 0xe000-0xefff 

[ 0.699850] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff 

[ 0.699855] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff 

[ 0.699876] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 

[ 0.699881] pci 0000:00:01.0: setting latency timer to 64 

[ 0.699891] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 

[ 0.699896] pci 0000:00:1c.0: setting latency timer to 64 

[ 0.699905] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 

[ 0.699911] pci 0000:00:1c.1: setting latency timer to 64 

[ 0.699920] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 

[ 0.699926] pci 0000:00:1c.2: setting latency timer to 64 

[ 0.699934] pci 0000:00:1e.0: setting latency timer to 64 

[ 0.699938] bus: 00 index 0 io port: [0, ffff] 

[ 0.699941] bus: 00 index 1 mmio: [0, ffffffff] 

[ 0.699943] bus: 01 index 0 io port: [c000, cfff] 

[ 0.699946] bus: 01 index 1 mmio: [f4000000, f7ffffff] 

[ 0.699948] bus: 01 index 2 mmio: [c0000000, cfffffff] 

[ 0.699950] bus: 01 index 3 mmio: [0, 0] 

[ 0.699953] bus: 05 index 0 mmio: [0, 0] 

[ 0.699955] bus: 05 index 1 mmio: [0, 0] 

[ 0.699957] bus: 05 index 2 mmio: [0, 0] 

[ 0.699959] bus: 05 index 3 mmio: [0, 0] 

[ 0.699961] bus: 04 index 0 mmio: [0, 0] 

[ 0.699963] bus: 04 index 1 mmio: [0, 0] 

[ 0.699965] bus: 04 index 2 mmio: [0, 0] 

[ 0.699967] bus: 04 index 3 mmio: [0, 0] 

[ 0.699969] bus: 02 index 0 io port: [d000, dfff] 

[ 0.699972] bus: 02 index 1 mmio: [f8000000, fbefffff] 

[ 0.699974] bus: 02 index 2 mmio: [dc000000, dfffffff] 

[ 0.699976] bus: 02 index 3 mmio: [0, 0] 

[ 0.699979] bus: 06 index 0 io port: [e000, efff] 

[ 0.699981] bus: 06 index 1 mmio: [fbf00000, fbffffff] 

[ 0.699984] bus: 06 index 2 mmio: [d0000000, d00fffff] 

[ 0.699986] bus: 06 index 3 io port: [0, ffff] 

[ 0.699988] bus: 06 index 4 mmio: [0, ffffffff] 

[ 0.699999] NET: Registered protocol family 2 

[ 0.713059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) 

[ 0.713349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) 

[ 0.713855] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) 

[ 0.714208] TCP: Hash tables configured (established 131072 bind 65536) 

[ 0.714213] TCP reno registered 

[ 0.717126] NET: Registered protocol family 1 

[ 0.717269] checking if image is initramfs... it is 

[ 1.510362] Freeing initrd memory: 7990k freed 

[ 1.511648] audit: initializing netlink socket (disabled) 

[ 1.511666] type=2000 audit(1226512806.508:1): initialized 

[ 1.518460] highmem bounce pool size: 64 pages 

[ 1.518467] HugeTLB registered 4 MB page size, pre-allocated 0 pages 

[ 1.521030] VFS: Disk quotas dquot_6.5.1 

[ 1.521131] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 

[ 1.521240] msgmni has been set to 1725 

[ 1.521379] io scheduler noop registered 

[ 1.521382] io scheduler anticipatory registered 

[ 1.521385] io scheduler deadline registered 

[ 1.521398] io scheduler cfq registered (default) 

[ 1.521548] pci 0000:01:00.0: Boot video device 

[ 1.521693] pcieport-driver 0000:00:01.0: setting latency timer to 64 

[ 1.521742] pcieport-driver 0000:00:01.0: found MSI capability 

[ 1.521782] pci_express 0000:00:01.0:pcie00: allocate port service 

[ 1.521830] pci_express 0000:00:01.0:pcie02: allocate port service 

[ 1.521874] pci_express 0000:00:01.0:pcie03: allocate port service 

[ 1.521981] pcieport-driver 0000:00:1c.0: setting latency timer to 64 

[ 1.522022] pcieport-driver 0000:00:1c.0: found MSI capability 

[ 1.522064] pci_express 0000:00:1c.0:pcie00: allocate port service 

[ 1.522109] pci_express 0000:00:1c.0:pcie02: allocate port service 

[ 1.522153] pci_express 0000:00:1c.0:pcie03: allocate port service 

[ 1.522258] pcieport-driver 0000:00:1c.1: setting latency timer to 64 

[ 1.522299] pcieport-driver 0000:00:1c.1: found MSI capability 

[ 1.522341] pci_express 0000:00:1c.1:pcie00: allocate port service 

[ 1.522384] pci_express 0000:00:1c.1:pcie02: allocate port service 

[ 1.522428] pci_express 0000:00:1c.1:pcie03: allocate port service 

[ 1.522531] pcieport-driver 0000:00:1c.2: setting latency timer to 64 

[ 1.522572] pcieport-driver 0000:00:1c.2: found MSI capability 

[ 1.522613] pci_express 0000:00:1c.2:pcie00: allocate port service 

[ 1.522659] pci_express 0000:00:1c.2:pcie02: allocate port service 

[ 1.522705] pci_express 0000:00:1c.2:pcie03: allocate port service 

[ 1.523075] isapnp: Scanning for PnP cards... 

[ 1.876263] isapnp: No Plug & Play device found 

[ 1.912745] hpet_resources: 0xfed00000 is busy 

[ 1.912847] Serial: 8250/16550 driver4 ports, IRQ sharing enabled 

[ 1.915317] brd: module loaded 

[ 1.915398] input: Macintosh mouse button emulation as /devices/virtual/input/input0 

[ 1.915543] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 

[ 1.918050] i8042.c: Detected active multiplexing controller, rev 1.1. 

[ 1.918689] serio: i8042 KBD port at 0x60,0x64 irq 1 

[ 1.918695] serio: i8042 AUX0 port at 0x60,0x64 irq 12 

[ 1.918699] serio: i8042 AUX1 port at 0x60,0x64 irq 12 

[ 1.918701] serio: i8042 AUX2 port at 0x60,0x64 irq 12 

[ 1.918704] serio: i8042 AUX3 port at 0x60,0x64 irq 12 

[ 1.920139] mice: PS/2 mouse device common for all mice 

[ 1.920296] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 

[ 1.920322] rtc0: alarms up to one month, y3k, hpet irqs 

[ 1.920470] EISA: Probing bus 0 at eisa.0 

[ 1.920501] EISA: Detected 0 cards. 

[ 1.920505] cpuidle: using governor ladder 

[ 1.920508] cpuidle: using governor menu 

[ 1.921110] TCP cubic registered 

[ 1.921145] Using IPI No-Shortcut mode 

[ 1.921350] registered taskstats version 1 

[ 1.921499] Magic number: 0:802:38 

[ 1.921592] system 00:0a: hash matches 

[ 1.921636] rtc_cmos 00:03: setting system clock to 2008-11-12 18:00:07 UTC (1226512807) 

[ 1.921640] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 

[ 1.921642] EDD information not available. 

[ 1.921890] Freeing unused kernel memory: 424k freed 

[ 1.921933] Write protecting the kernel text: 2576k 

[ 1.921962] Write protecting the kernel read-only data: 936k 

[ 1.952188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 

[ 2.081075] fuse init (API version 7.9) 

[ 2.173570] ACPI: SSDT BFF9E0B0, 08FE (r1 AMI CPU1PM 1 INTL 20060113) 

[ 2.174376] ACPI: CPU0 (power states: C1[C1] C2[C2]) 

[ 2.174447] processor ACPI0007:00: registered as cooling_device0 

[ 2.174769] ACPI: SSDT BFF9E9B0, 0120 (r1 AMI CPU2PM 1 INTL 20060113) 

[ 2.175578] ACPI: CPU1 (power states: C1[C1] C2[C2]) 

[ 2.175634] processor ACPI0007:01: registered as cooling_device1 

[ 2.178531] Marking TSC unstable due to TSC halts in idle 

[ 2.179300] thermal LNXTHERM:01: registered as thermal_zone0 

[ 2.180250] ACPI: Thermal Zone [TZ00] (54 C) 

[ 2.625753] usbcore: registered new interface driver usbfs 

[ 2.625783] usbcore: registered new interface driver hub 

[ 2.625839] usbcore: registered new device driver usb 

[ 2.631259] USB Universal Host Controller Interface driver v3.0 

[ 2.631310] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 

[ 2.631322] uhci_hcd 0000:00:1a.0: setting latency timer to 64 

[ 2.631327] uhci_hcd 0000:00:1a.0: UHCI Host Controller 

[ 2.631377] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 

[ 2.631415] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880 

[ 2.631579] usb usb1: configuration #1 chosen from 1 choice 

[ 2.631612] hub 1-0:1.0: USB hub found 

[ 2.631620] hub 1-0:1.0: 2 ports detected 

[ 2.713813] No dock devices found. 

[ 2.733402] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 

[ 2.733457] uhci_hcd 0000:00:1a.1: setting latency timer to 64 

[ 2.733462] uhci_hcd 0000:00:1a.1: UHCI Host Controller 

[ 2.733495] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 

[ 2.733537] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00 

[ 2.733849] usb usb2: configuration #1 chosen from 1 choice 

[ 2.733880] hub 2-0:1.0: USB hub found 

[ 2.733888] hub 2-0:1.0: 2 ports detected 

[ 2.760148] SCSI subsystem initialized 

[ 2.819721] libata version 3.00 loaded. 

[ 2.941423] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 

[ 2.941445] ehci_hcd 0000:00:1a.7: setting latency timer to 64 

[ 2.941449] ehci_hcd 0000:00:1a.7: EHCI Host Controller 

[ 2.941486] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 

[ 2.945404] ehci_hcd 0000:00:1a.7: debug port 1 

[ 2.945412] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported 

[ 2.945429] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00 

[ 3.111832] usb 2-2: new full speed USB device using uhci_hcd and address 2 

[ 3.121240] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 

[ 3.121418] usb usb3: configuration #1 chosen from 1 choice 

[ 3.121450] hub 3-0:1.0: USB hub found 

[ 3.121462] hub 3-0:1.0: 4 ports detected 

[ 3.180062] hub 2-0:1.0: unable to enumerate USB device on port 2 

[ 3.328388] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 

[ 3.328398] uhci_hcd 0000:00:1d.0: setting latency timer to 64 

[ 3.328402] uhci_hcd 0000:00:1d.0: UHCI Host Controller 

[ 3.328433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 

[ 3.328469] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400 

[ 3.328578] usb usb4: configuration #1 chosen from 1 choice 

[ 3.328612] hub 4-0:1.0: USB hub found 

[ 3.328621] hub 4-0:1.0: 2 ports detected 

[ 3.432582] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 

[ 3.432592] uhci_hcd 0000:00:1d.1: setting latency timer to 64 

[ 3.432597] uhci_hcd 0000:00:1d.1: UHCI Host Controller 

[ 3.432635] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 

[ 3.432669] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480 

[ 3.432785] usb usb5: configuration #1 chosen from 1 choice 

[ 3.432815] hub 5-0:1.0: USB hub found 

[ 3.432823] hub 5-0:1.0: 2 ports detected 

[ 3.448681] usb 3-4: new high speed USB device using ehci_hcd and address 2 

[ 3.537761] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 

[ 3.537773] uhci_hcd 0000:00:1d.2: setting latency timer to 64 

[ 3.537778] uhci_hcd 0000:00:1d.2: UHCI Host Controller 

[ 3.537824] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 

[ 3.537854] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 

[ 3.537981] usb usb6: configuration #1 chosen from 1 choice 

[ 3.538013] hub 6-0:1.0: USB hub found 

[ 3.538022] hub 6-0:1.0: 2 ports detected 

[ 3.596127] usb 3-4: configuration #1 chosen from 1 choice 

[ 3.744932] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 

[ 3.744949] ehci_hcd 0000:00:1d.7: setting latency timer to 64 

[ 3.744953] ehci_hcd 0000:00:1d.7: EHCI Host Controller 

[ 3.744994] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 

[ 3.748903] ehci_hcd 0000:00:1d.7: debug port 1 

[ 3.748910] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported 

[ 3.748920] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800 

[ 3.856037] usb 6-1: new full speed USB device using uhci_hcd and address 2 

[ 3.869036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 

[ 3.869486] usb usb7: configuration #1 chosen from 1 choice 

[ 3.869776] hub 7-0:1.0: USB hub found 

[ 3.869785] hub 7-0:1.0: 6 ports detected 

[ 3.925060] hub 6-0:1.0: unable to enumerate USB device on port 1 

[ 4.083477] ata_piix 0000:00:1f.1: version 2.12 

[ 4.083495] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 

[ 4.083551] ata_piix 0000:00:1f.1: setting latency timer to 64 

[ 4.084304] scsi0 : ata_piix 

[ 4.085860] scsi1 : ata_piix 

[ 4.087626] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 

[ 4.087630] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 

[ 4.301036] usb 7-6: new high speed USB device using ehci_hcd and address 3 

[ 4.496397] ata1.01: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33 

[ 4.521375] usb 7-6: configuration #1 chosen from 1 choice 

[ 4.536332] ata1.01: configured for UDMA/33 

[ 4.536398] ata2: port disabled. ignoring. 

[ 4.538730] scsi 0:0:1:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5 

[ 4.539333] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 

[ 4.539339] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] 

[ 4.692058] ata_piix 0000:00:1f.2: setting latency timer to 64 

[ 4.692124] scsi2 : ata_piix 

[ 4.692517] scsi3 : ata_piix 

[ 4.695748] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 18 

[ 4.695755] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 18 

[ 4.760034] usb 6-1: new full speed USB device using uhci_hcd and address 3 

[ 5.006907] usb 6-1: configuration #1 chosen from 1 choice 

[ 5.172109] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 

[ 5.182080] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7 

[ 5.182083] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) 

[ 5.198077] ata3.00: configured for UDMA/133 

[ 5.526872] ata4: SATA link down (SStatus 0 SControl 0) 

[ 5.527018] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5 

[ 5.527145] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded 

[ 5.527167] r8169 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 

[ 5.527513] eth0: RTL8169sc/8110sc at 0xf883c000, 00:1e:8c:32:d9:de, XID 18000000 IRQ 18 

[ 5.528207] ohci1394 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 

[ 5.580930] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4] 

[ 5.601300] scsi 0:0:1:0: Attached scsi generic sg0 type 5 

[ 5.601344] scsi 2:0:0:0: Attached scsi generic sg1 type 0 

[ 5.626191] Driver 'sr' needs updating - please use bus_type methods 

[ 5.631710] Driver 'sd' needs updating - please use bus_type methods 

[ 5.643162] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 

[ 5.643167] Uniform CD-ROM driver Revision: 3.20 

[ 5.643278] sr 0:0:1:0: Attached scsi CD-ROM sr0 

[ 5.643397] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) 

[ 5.643419] sd 2:0:0:0: [sda] Write Protect is off 

[ 5.643424] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 

[ 5.646608] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 

[ 5.646715] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) 

[ 5.646736] sd 2:0:0:0: [sda] Write Protect is off 

[ 5.646740] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 

[ 5.646778] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 

[ 5.646783] sda: sda1 sda2 < sda5 sda6 sda7 > 

[ 6.306874] sd 2:0:0:0: [sda] Attached SCSI disk 

[ 6.626949] PM: Starting manual resume from disk 

[ 6.626955] PM: Resume from partition 8:6 

[ 6.626957] PM: Checking hibernation image. 

[ 6.627170] PM: Resume from disk failed. 

[ 6.672204] kjournald starting. Commit interval 5 seconds 

[ 6.672217] EXT3-fs: mounted filesystem with ordered data mode. 

[ 6.856171] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008c1e00e39c0e00] 

[ 13.287566] udevd version 124 started 

[ 13.885114] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 

[ 13.941900] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 

[ 14.053771] Linux agpgart interface v0.103 

[ 14.107946] iTCO_vendor_support: vendor-support=0 

[ 14.110741] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) 

[ 14.110832] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware 

[ 14.110851] iTCO_wdt: No card detected 

[ 14.153933] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 

[ 14.184055] ACPI: Power Button (FF) [PWRF] 

[ 14.184211] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 

[ 14.185824] ACPI: Lid Switch [LID] 

[ 14.185966] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 

[ 14.209044] ACPI: Sleep Button (CM) [SLPB] 

[ 14.209178] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 

[ 14.241033] ACPI: Power Button (CM) [PWRB] 

[ 14.310444] ACPI: Battery Slot [BAT0] (battery absent) 

[ 14.351233] asus-laptop: Asus Laptop Support version 0.42 

[ 14.354030] asus-laptop: Error calling BSTS 

[ 14.354121] asus-laptop: Z96S model detected 

[ 14.364465] Registered led device: asus::mail 

[ 14.390859] ACPI: AC Adapter [AC0] (on-line) 

[ 14.635436] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input6 

[ 14.652049] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) 

[ 14.689038] sdhci: Secure Digital Host Controller Interface driver 

[ 14.689042] sdhci: Copyright(c) Pierre Ossman 

[ 14.730038] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 22) 

[ 14.730058] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 

[ 14.732169] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO 

[ 15.027688] nvidia: module license 'NVIDIA' taints kernel. 

[ 15.311584] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 

[ 15.311595] nvidia 0000:01:00.0: setting latency timer to 64 

[ 15.311773] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 

[ 15.313594] input: PC Speaker as /devices/platform/pcspkr/input/input7 

[ 15.403391] Bluetooth: Core ver 2.13 

[ 15.427313] NET: Registered protocol family 31 

[ 15.427317] Bluetooth: HCI device and connection manager initialized 

[ 15.427322] Bluetooth: HCI socket layer initialized 

[ 15.442257] Bluetooth: Generic Bluetooth USB driver ver 0.3 

[ 15.442364] usbcore: registered new interface driver btusb 

[ 16.129757] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 

[ 16.129795] HDA Intel 0000:00:1b.0: setting latency timer to 64 

[ 16.161958] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... 

[ 16.240459] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 

[ 16.280960] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 

[ 17.290419] lp: driver loaded but no devices found 

[ 17.493429] Adding 2045944k swap on /dev/sda6. Priority:-1 extents:1 across:2045944k 

[ 18.043914] EXT3 FS on sda7, internal journal 

[ 19.114975] type=1505 audit(1226509225.004:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4321 

[ 19.310126] type=1505 audit(1226509225.199:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4326 

[ 19.310353] type=1505 audit(1226509225.199:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4326 

[ 19.473523] ip_tables: (C) 2000-2006 Netfilter Core Team 

[ 20.115539] ACPI: WMI: Mapper loaded 

[ 21.104232] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) 

[ 21.185427] apm: BIOS not found. 

[ 21.356383] ppdev: user-space parallel port driver 

[ 23.836286] Bluetooth: L2CAP ver 2.11 

[ 23.836302] Bluetooth: L2CAP socket layer initialized 

[ 23.875025] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 

[ 23.875040] Bluetooth: BNEP filters: protocol multicast 

[ 23.916145] Bridge firewalling registered 

[ 23.917447] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. 

[ 23.934989] Bluetooth: SCO (Voice Link) ver 0.6 

[ 23.935003] Bluetooth: SCO socket layer initialized 

[ 23.993340] Bluetooth: RFCOMM socket layer initialized 

[ 23.993919] Bluetooth: RFCOMM TTY layer initialized 

[ 23.993934] Bluetooth: RFCOMM ver 1.10 

[ 28.996898] r8169: eth0: link down 

[ 29.380638] usb 3-4: USB disconnect, address 2 

[ 67.516185] CPU0 attaching NULL sched-domain. 

[ 67.516207] CPU1 attaching NULL sched-domain. 

[ 67.519395] CPU0 attaching sched-domain: 

[ 67.519409] domain 0: span 0-1 level MC 

[ 67.519416] groups: 0 1 

[ 67.519431] CPU1 attaching sched-domain: 

[ 67.519436] domain 0: span 0-1 level MC 

[ 67.519442] groups: 1 0 

[ 89.744429] NET: Registered protocol family 10 

[ 89.745841] lo: Disabled Privacy Extensions 

[ 89.747351] ADDRCONF(NETDEV_UP): eth0: link is not ready 

snaypse@snaypse-laptop:~$

Je devrais Supprimer le module ndiswrapper de la blacklist et réessayer?

preterax · Le 12/11/2008, à 20:33

Il faut executer les commandes en tant que super utilisateur (root)
Tape sudo avant chaque commande (sudo modprobe ...)
Laisse ndiswrapper blacklister car il est préférable d'utiliser le driver natif (celui du noyau).

Dernière modification par preterax (Le 12/11/2008, à 20:34)

Snaypse · Le 12/11/2008, à 23:30

Bon ça marche le voyant c'est allumé et elle aparait désormé dans dmesg,lsusb et iwconfig, j'ai pu me connecter sur le net mais (oui il y a toujours un mais ) dés que je reboot le pc elle n'est plus reconnue, comment faire pour sauvgader ces paramètres ou bien les appliqués au démarage d'ubuntu automatiquement?

Dernière modification par Snaypse (Le 12/11/2008, à 23:40)

preterax · Le 13/11/2008, à 10:01

Pour avoir la carte activée au boot il suffit d'éditer /etc/rc.local

sudo gedit /etc/rc.local

et ajoute la commande qui active la carte wifi

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

echo  1  >  /sys/devices/platform/asus-laptop/wlan
exit 0

Une petite question t'as connexion wifi est en WEP ou WPA ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 07/11/2008, à 00:13

[Résolu] Carte wifi Realtek RTL 8187b non détecté

#2 Le 07/11/2008, à 00:30

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#3 Le 07/11/2008, à 00:48

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#4 Le 07/11/2008, à 00:59

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#5 Le 07/11/2008, à 01:02

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#6 Le 07/11/2008, à 11:14

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#7 Le 07/11/2008, à 11:52

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#8 Le 07/11/2008, à 12:29

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#9 Le 07/11/2008, à 14:20

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#10 Le 07/11/2008, à 15:08

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#11 Le 07/11/2008, à 18:41

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#12 Le 07/11/2008, à 19:08

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#13 Le 07/11/2008, à 22:44

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#14 Le 08/11/2008, à 14:50

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#15 Le 10/11/2008, à 23:20

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#16 Le 10/11/2008, à 23:35

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#17 Le 10/11/2008, à 23:56

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#18 Le 11/11/2008, à 11:17

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#19 Le 11/11/2008, à 18:10

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#20 Le 12/11/2008, à 16:03

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#21 Le 12/11/2008, à 17:32

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#22 Le 12/11/2008, à 19:28

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#23 Le 12/11/2008, à 20:33

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#24 Le 12/11/2008, à 23:30

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

#25 Le 13/11/2008, à 10:01

Re : [Résolu] Carte wifi Realtek RTL 8187b non détecté

Pied de page des forums