Ubuntu-fr

cva106

Ethernet filaire via adaptateur USB3

Mon portable idéapd 100S n'ayant pas de port Ethernet, et seulement des USB, j'ai acheté un adaptateur Ethernet via USB3. L'adaptateur est reconnu dans la liste lorsque je fait un lsusb
Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp.
Mais je n'arrive pas à l'utiliser
que faut il faire ?

xubu1957

Re : Ethernet filaire via adaptateur USB3

Bonjour,

Il y a cette page dans la Doc > ethernet_usb3_realtek_rtl8153, mais le lien vers le site du fabricant Realtek donne un retour 404.

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

cva106

Re : Ethernet filaire via adaptateur USB3

Merci, C'est ce que j'avais trouvé, on arrive avec un peu de mal à récupérer cela : Ethernet LINUX driver r8152 for kernel up to 4.15
J'ai donc refait la procédure décrite, ce que j'avais fais la semaine dernière, mais toujours rien.
Dans le reademe du driver il parle de supporter S5 WOL, de quoi s'agit il ?

xubu1957

Re : Ethernet filaire via adaptateur USB3

Je trouve, dans cette documentation > support.microsoft.com/fr-fr/help/2776718/wake-on-lan-wol-behavior-in-windows-8-windows-8-1-and-windows-10

La fonctionnalité « Mise en éveil sur réseau local » (WOL) sort du mode veille un ordinateur à partir d’un état de faible consommation d’énergie lorsqu’une carte réseau détecte un événement WOL

...arrêt par défaut place le système dans l’état d’arrêt classique (S5), et tous les périphériques sont placés dans l’état d’alimentation le plus bas (D3).

C'est ce README > github.com/wget/realtek-r8152-linux ?

_ _ _

Je trouve aussi dans > probleme adaptateur usb c ethernet

Secure boot est désactivé dans le bios ?

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

cva106

Re : Ethernet filaire via adaptateur USB3

Oui le readme c'est bien celui-ci
Sur l'autre lien proposé , il y a aussi un lien vers fil de Débian facile
mais les deux sont de fils de 2017 et le driver trouvé chez Realtek est de 12/2018
je m'y recollerais demain...
Sur le moniteur systeme, on voit un peu de débit sortant 120Kio et seulement  9Kio rentrant en 3-4 minutes

xubu1957

Re : Ethernet filaire via adaptateur USB3

Tu as un retour avec :

sudo modprobe r8153

?

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

cva106

Re : Ethernet filaire via adaptateur USB3

Le retour est :
modprobe: FATAL: Module r8153 not found in directory /lib/modules/4.4.0.145-generic
et si je fais : sudo modprobe r8152 il n'y à pas de message de retour
Dans le répertoire je trouve un fichier r8152.ko mais pas de r8153. Les autres fichiers sont : r8188eu.ko, r8192u_usb.ko, r8169.ko et r8192e_pci.ko
Dans le zip de départ r8152.53.56-2.11.0.tar.zip il n'y à pas de fichier r8153 !

PS j'utilise mon PC fixe pour te répondre

inbox

Re : Ethernet filaire via adaptateur USB3

Salut,

Si ta Box permet un branchement USB, essaye de brancher un câble USB entre ton PC et ta Box. Sur les Freebox V5, cela fonctionne.

A+

---

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

cva106

Re : Ethernet filaire via adaptateur USB3

a @inbox : la box à des ports USB, mais c'est une bbox ancien modèle (2012) et trop loin (2 étages). La maison est câblée pour avoir accès au réseau un peu partout. Je pourrais aller faire un essai mais je n'ai pas de câble USB mâle-mâle. Et si ca marche cela me prouvera quoi ?

Iamawalrus

Re : Ethernet filaire via adaptateur USB3

Salut,

T'as jeté un œil par ici :

http://michael-peeters.blogspot.com/201 … buntu.html

---

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

inbox

Re : Ethernet filaire via adaptateur USB3

Te connecter en USB te permettrai de mettre ton système à jour et d'installer des paquets utiles pour faire fonctionner ton adaptateur USB3.

---

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

cva106

Re : Ethernet filaire via adaptateur USB3

@lamawalrus : j'ai essayé mais sans changement
@inbox : Ok mais je pense etre à jour et avoir récupérer le seul driver dispo chez realtek. En me déplaçant je peux attraper de la wifi si besoin. Quels autres paquets chercher ?

cva106

Re : Ethernet filaire via adaptateur USB3

Après avoir tenté la proposition de @lamawalrus, le graphique de l'historique réseau à changer un moment en envoyant a peine plus de données (où ?) mais aucune données entrantes, puis il est revenu au graph régulier de quelques malheureux octet envoyés  ou essayé d'envoyé !

Iamawalrus

Re : Ethernet filaire via adaptateur USB3

Tu peux donner le retour de :

cat /etc/default/tlp

lsmod | grep r8152

dmesg

Par ailleurs est-ce que t'as redémarré ?

---

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

cva106

Re : Ethernet filaire via adaptateur USB3

cvaporta@cvaporta16:~$ cat /etc/default/tlp
USB_BLACKLIST="0bda:8153"

cvaporta@cvaporta16:~$ lsmod | grep r8152
r8152                 147456  0

pour dmesg, je ne sais pas comment te copier la fenetre du terminal. Voici des extraits qui semble correspondre aux éléments souhaités :

[    4.600427] r8152 2-1:1.0 eth0: v2.11.0 (2018/12/21)
[    4.600430] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
               		US6,570,884, US6,115,776, and US6,327,625.

[    6.018331] r8152 2-1:1.0 enx00e04c68004a: renamed from eth0

[    7.562451] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.585761] IPv6: ADDRCONF(NETDEV_UP): enx00e04c68004a: link is not ready
[    7.593149] IPv6: ADDRCONF(NETDEV_UP): enx00e04c68004a: link is not ready
[    7.612133] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c68004a: link becomes ready
[    7.612390] r8152 2-1:1.0 enx00e04c68004a: carrier on

Dernière modification par cva106 (Le 14/04/2019, à 22:16)

xubu1957

Re : Ethernet filaire via adaptateur USB3

Bonjour,

Pour ajouter toi-même les balises code à ton précédent message #15 :

• Cliquer sur  le lien « Modifier » en bas à droite du message

• Sélectionner le texte

• Cliquer sur le <> de l'éditeur de message

comme indiqué dans le : Retour utilisable de commande

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

cva106

Re : Ethernet filaire via adaptateur USB3

Voici d'autres lignes trouvées
[    4.419609] r8152: loading out-of-tree module taints kernel.
[    4.419738] r8152: module verification failed: signature and/or required key missing - tainting kernel
[    4.422516] usbcore: registered new interface driver r8152

Quelles autres infos te chercher ?

cva106

Re : Ethernet filaire via adaptateur USB3

Voici tout le retour de dmesg

cvaporta@cvaporta16:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-145-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #171-Ubuntu SMP Tue Mar 26 12:43:40 UTC 2019 (Ubuntu 4.4.0-145.171-generic 4.4.176)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=279984d6-bc0d-4e56-b34b-47f35d967419 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000076182fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076183000-0x0000000076382fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000076383000-0x000000007741dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007741e000-0x000000007756dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007756e000-0x00000000775adfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000775ae000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[    0.000000] efi:  ESRT=0x7741d000  ACPI=0x775ad000  ACPI 2.0=0x775ad014  SMBIOS=0x77409000 
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80R9/Aristotle 14, BIOS E4CN34WW 08/02/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFA00000 mask FFFA00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07E000000 mask FFE000000 uncachable
[    0.000000]   3 base 07D000000 mask FFF000000 uncachable
[    0.000000]   4 base 07C800000 mask FFF800000 uncachable
[    0.000000]   5 base 07C400000 mask FFFC00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[    0.000000] BRK [0x0320e000, 0x0320efff] PGTABLE
[    0.000000] BRK [0x0320f000, 0x0320ffff] PGTABLE
[    0.000000] BRK [0x03210000, 0x03210fff] PGTABLE
[    0.000000] BRK [0x03211000, 0x03211fff] PGTABLE
[    0.000000] BRK [0x03212000, 0x03212fff] PGTABLE
[    0.000000] BRK [0x03213000, 0x03213fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3338a000-0x359bcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000775AD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000775AD170 0000B4 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000775AA000 00010C (v05 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x000000007759C000 0092AD (v02 LENOVO EDK2     00000003 CHV  0100000D)
[    0.000000] ACPI: FACS 0x0000000077512000 000040
[    0.000000] ACPI: FACS 0x0000000077512000 000040
[    0.000000] ACPI: UEFI 0x00000000775AC000 000042 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000775A8000 00003C (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000775A7000 0005E0 (v01 LENOVO CpuDptf  00000003 CHV  0100000D)
[    0.000000] ACPI: SSDT 0x00000000775A6000 000AA3 (v01 LENOVO DptfTab  00000003 CHV  0100000D)
[    0.000000] ACPI: SSDT 0x000000007759B000 000763 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x000000007759A000 000290 (v01 LENOVO Cpu0Tst  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x0000000077599000 00017A (v01 LENOVO ApTst    00003000 INTL 20120711)
[    0.000000] ACPI: APIC 0x00000000775A9000 000084 (v03 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x0000000077598000 000042 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x0000000077511000 000055 (v03 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: BATB 0x0000000077597000 000046 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x0000000077596000 000064 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x0000000077595000 000432 (v01 LENOVO Tpm2Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: TPM2 0x0000000077594000 000034 (v03 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x0000000077593000 000102 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: BGRT 0x0000000077592000 000038 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: tCSR 0x00000000775AB000 00014C (v00 LENOVO CB-01    00000002 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000077ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x75db2000-0x75db6fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000077ffffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000076182fff]
[    0.000000]   node   0: [mem 0x00000000775ae000-0x0000000077ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000077ffffff]
[    0.000000] On node 0 totalpages: 485744
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7616 pages used for memmap
[    0.000000]   DMA32 zone: 481749 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7c800000-0x7e7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76183000-0x76382fff]
[    0.000000] PM: Registered nosave memory: [mem 0x76383000-0x7741dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7741e000-0x7756dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7756e000-0x775adfff]
[    0.000000] e820: [mem 0x7e800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff880075a00000 s99480 r8192 d31592 u524288
[    0.000000] pcpu-alloc: s99480 r8192 d31592 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 478041
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-145-generic root=UUID=279984d6-bc0d-4e56-b34b-47f35d967419 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1801336K/1942976K available (8608K kernel code, 1333K rwdata, 4008K rodata, 1484K init, 1284K bss, 141640K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1599.967 MHz processor
[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.93 BogoMIPS (lpj=6399868)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000052] ACPI: Core revision 20150930
[    0.014553] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.017017] Security Framework initialized
[    0.017024] Yama: becoming mindful.
[    0.017055] AppArmor: AppArmor initialized
[    0.017273] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.018296] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.018902] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.018910] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.019295] Initializing cgroup subsys io
[    0.019306] Initializing cgroup subsys memory
[    0.019321] Initializing cgroup subsys devices
[    0.019326] Initializing cgroup subsys freezer
[    0.019331] Initializing cgroup subsys net_cls
[    0.019335] Initializing cgroup subsys perf_event
[    0.019340] Initializing cgroup subsys net_prio
[    0.019347] Initializing cgroup subsys hugetlb
[    0.019351] Initializing cgroup subsys pids
[    0.019377] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.019380] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024694] mce: CPU supports 6 MCE banks
[    0.024706] CPU0: Thermal monitoring enabled (TM1)
[    0.024712] process: using mwait in idle threads
[    0.024719] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.024721] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.024725] Spectre V2 : Mitigation: Full generic retpoline
[    0.024727] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.025146] Freeing SMP alternatives memory: 36K
[    0.031232] ftrace: allocating 32283 entries in 127 pages
[    0.055190] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.055196] smpboot: Max logical packages: 2
[    0.057161] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.096874] TSC deadline timer enabled
[    0.096879] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.096909] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.096924] ... version:                3
[    0.096926] ... bit width:              40
[    0.096928] ... generic registers:      2
[    0.096929] ... value mask:             000000ffffffffff
[    0.096931] ... max period:             0000007fffffffff
[    0.096933] ... fixed-purpose events:   3
[    0.096935] ... event mask:             0000000700000003
[    0.098432] x86: Booting SMP configuration:
[    0.098438] .... node  #0, CPUs:      #1
[    0.105871] x86: Booted up 1 node, 2 CPUs
[    0.105875] smpboot: Total of 2 processors activated (6399.86 BogoMIPS)
[    0.106079] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.106886] devtmpfs: initialized
[    0.112032] evm: security.selinux
[    0.112035] evm: security.SMACK64
[    0.112036] evm: security.SMACK64EXEC
[    0.112038] evm: security.SMACK64TRANSMUTE
[    0.112039] evm: security.SMACK64MMAP
[    0.112041] evm: security.ima
[    0.112043] evm: security.capability
[    0.112153] PM: Registering ACPI NVS region [mem 0x00058000-0x00058fff] (4096 bytes)
[    0.112156] PM: Registering ACPI NVS region [mem 0x7741e000-0x7756dfff] (1376256 bytes)
[    0.112296] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.112315] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.112490] pinctrl core: initialized pinctrl subsystem
[    0.112678] RTC time: 19:17:14, date: 04/14/19
[    0.112967] NET: Registered protocol family 16
[    0.121871] cpuidle: using governor ladder
[    0.133879] cpuidle: using governor menu
[    0.133885] PCCT header not found.
[    0.134000] ACPI: bus type PCI registered
[    0.134004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.134126] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.134131] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.134140] PCI: Using configuration type 1 for base access
[    0.146645] ACPI: Added _OSI(Module Device)
[    0.146650] ACPI: Added _OSI(Processor Device)
[    0.146652] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146654] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149589] ACPI Error: No handler for Region [ECF2] (ffff880070db4318) [EmbeddedControl] (20150930/evregion-163)
[    0.149596] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150930/exfldio-297)
[    0.149602] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff880070db5d48), AE_NOT_EXIST (20150930/psparse-542)
[    0.149697] ACPI Error: No handler for Region [ECF2] (ffff880070db4318) [EmbeddedControl] (20150930/evregion-163)
[    0.149702] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150930/exfldio-297)
[    0.149707] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff880070db5d48), AE_NOT_EXIST (20150930/psparse-542)
[    0.155748] ACPI: Dynamic OEM Table Load:
[    0.155761] ACPI: SSDT 0xFFFF8800707BA800 0006B8 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.156625] ACPI: Dynamic OEM Table Load:
[    0.156634] ACPI: SSDT 0xFFFF880077810C00 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.157790] ACPI: Dynamic OEM Table Load:
[    0.157799] ACPI: SSDT 0xFFFF8800707F5400 00015F (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.158627] ACPI: Dynamic OEM Table Load:
[    0.158635] ACPI: SSDT 0xFFFF8800707C9D80 00008D (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.159840] ACPI : EC: EC started
[    0.370164] ACPI: Interpreter enabled
[    0.370198] ACPI: (supports S0 S3 S4 S5)
[    0.370200] ACPI: Using IOAPIC for interrupt routing
[    0.370255] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.419581] ACPI: Power Resource [USBC] (on)
[    0.424154] ACPI: Power Resource [CLK0] (off)
[    0.424215] ACPI: Power Resource [CLK1] (off)
[    0.426662] ACPI: Power Resource [ID3C] (on)
[    0.430875] ACPI: Power Resource [FN00] (off)
[    0.431643] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.431654] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.431721] \_SB_.PCI0:_OSC invalid UUID
[    0.431724] _OSC request data:1 1f 0 
[    0.431731] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.431749] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.432241] PCI host bridge to bus 0000:00
[    0.432247] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.432251] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.432254] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.432257] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.432260] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.432264] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.432267] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.432270] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.432274] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.432286] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.432495] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.432524] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.432537] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.432546] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.432716] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.432742] pci 0000:00:0b.0: reg 0x10: [mem 0x91314000-0x91314fff 64bit]
[    0.432924] pci 0000:00:12.0: [8086:2296] type 00 class 0x080501
[    0.432956] pci 0000:00:12.0: reg 0x10: [mem 0x91315000-0x91315fff]
[    0.433046] pci 0000:00:12.0: PME# supported from D0 D3hot
[    0.433205] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.433273] pci 0000:00:13.0: reg 0x20: [io  0x1060-0x107f]
[    0.433286] pci 0000:00:13.0: reg 0x24: [mem 0x9131a000-0x9131a7ff]
[    0.433333] pci 0000:00:13.0: PME# supported from D3hot
[    0.433479] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.433516] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.433589] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.433688] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.433760] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.433792] pci 0000:00:1a.0: reg 0x10: [mem 0x91200000-0x912fffff]
[    0.433804] pci 0000:00:1a.0: reg 0x14: [mem 0x91100000-0x911fffff]
[    0.433876] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.434039] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.434083] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[    0.434179] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.434319] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.434414] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.434556] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.434652] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.434805] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.435056] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.435133] pci 0000:00:1f.3: reg 0x10: [mem 0x9131a800-0x9131a81f]
[    0.435248] pci 0000:00:1f.3: reg 0x20: [io  0x1040-0x105f]
[    0.435577] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.435705] pci 0000:02:00.0: [8086:08b4] type 00 class 0x028000
[    0.435795] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
[    0.436021] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.436103] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.442174] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.442184] pci 0000:00:1c.2:   bridge window [mem 0x91000000-0x910fffff]
[    0.468502] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.468611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.468717] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.468822] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.468927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469033] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469145] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469250] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.470109] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.470347] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.470351] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.470357] vgaarb: loaded
[    0.470359] vgaarb: bridge control possible 0000:00:02.0
[    0.470753] SCSI subsystem initialized
[    0.470859] libata version 3.00 loaded.
[    0.470901] ACPI: bus type USB registered
[    0.470936] usbcore: registered new interface driver usbfs
[    0.470955] usbcore: registered new interface driver hub
[    0.470979] usbcore: registered new device driver usb
[    0.471354] PCI: Using ACPI for IRQ routing
[    0.473995] PCI: pci_cache_line_size set to 64 bytes
[    0.474056] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.474060] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.474062] e820: reserve RAM buffer [mem 0x76183000-0x77ffffff]
[    0.474277] NetLabel: Initializing
[    0.474280] NetLabel:  domain hash size = 128
[    0.474282] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.474300] NetLabel:  unlabeled traffic allowed by default
[    0.474437] amd_nb: Cannot enumerate AMD northbridges
[    0.474488] clocksource: Switched to clocksource refined-jiffies
[    0.485505] AppArmor: AppArmor Filesystem Enabled
[    0.485644] pnp: PnP ACPI init
[    0.506839] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.506844] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.506848] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.506855] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.506972] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.507034] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.507112] pnp 00:03: Plug and Play ACPI device, IDs ETD064e ETD0000 PNP0f13 (active)
[    0.508837] system 00:04: [mem 0x91318000-0x91318fff] has been reserved
[    0.508842] system 00:04: [mem 0x91316000-0x91316fff] has been reserved
[    0.508848] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.508985] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.508990] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.508993] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.508997] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.509000] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.509004] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.509007] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.509011] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.509014] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.509020] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.509286] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.509534] pnp: PnP ACPI: found 7 devices
[    0.517560] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.517590] clocksource: Switched to clocksource acpi_pm
[    0.517616] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.517621] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.517629] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.517647] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.517651] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.517655] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.517659] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.517662] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.517666] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.517677] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91400000-0x915fffff]
[    0.517685] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91600000-0x917fffff 64bit pref]
[    0.517691] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.517697] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.517701] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.517709] pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x915fffff]
[    0.517715] pci 0000:00:1c.0:   bridge window [mem 0x91600000-0x917fffff 64bit pref]
[    0.517725] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.517732] pci 0000:00:1c.2:   bridge window [mem 0x91000000-0x910fffff]
[    0.517744] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.517748] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.517751] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.517754] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.517757] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.517760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.517764] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.517767] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.517770] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.517773] pci_bus 0000:01: resource 1 [mem 0x91400000-0x915fffff]
[    0.517776] pci_bus 0000:01: resource 2 [mem 0x91600000-0x917fffff 64bit pref]
[    0.517780] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    0.517839] NET: Registered protocol family 2
[    0.518202] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.518316] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.518406] TCP: Hash tables configured (established 16384 bind 16384)
[    0.518474] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.518491] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.518595] NET: Registered protocol family 1
[    0.518628] pci 0000:00:02.0: Video device with shadowed ROM
[    0.518974] PCI: CLS 0 bytes, default 64
[    0.519084] Unpacking initramfs...
[    1.362010] Freeing initrd memory: 39116K
[    1.362353] Scanning for low memory corruption every 60 seconds
[    1.363099] audit: initializing netlink subsys (disabled)
[    1.363133] audit: type=2000 audit(1555269435.359:1): initialized
[    1.363660] Initialise system trusted keyring
[    1.363901] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.366467] zbud: loaded
[    1.366953] VFS: Disk quotas dquot_6.6.0
[    1.367014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.367486] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.367996] fuse init (API version 7.23)
[    1.368256] Key type big_key registered
[    1.368283] Allocating IMA MOK and blacklist keyrings.
[    1.370300] Key type asymmetric registered
[    1.370306] Asymmetric key parser 'x509' registered
[    1.370383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.370502] io scheduler noop registered
[    1.370507] io scheduler deadline registered (default)
[    1.370563] io scheduler cfq registered
[    1.371051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.371063] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.371122] efifb: probing for efifb
[    1.371153] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[    1.371156] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.371158] efifb: scrolling: redraw
[    1.371161] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.371354] Console: switching to colour frame buffer device 170x48
[    1.371385] fb0: EFI VGA frame buffer device
[    1.371401] intel_idle: MWAIT substates: 0x33000020
[    1.371404] intel_idle: v0.4.1 model 0x4C
[    1.371406] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.372106] ACPI: AC Adapter [ADP1] (on-line)
[    1.372220] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.372768] ACPI: Lid Switch [LID0]
[    1.372845] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.372851] ACPI: Power Button [PWRB]
[    1.372920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.372924] ACPI: Power Button [PWRF]
[    1.377376] thermal LNXTHERM:00: registered as thermal_zone0
[    1.377382] ACPI: Thermal Zone [TZ01] (27 C)
[    1.377436] GHES: HEST is not enabled!
[    1.377862] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.398222] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.401481] Linux agpgart interface v0.103
[    1.429322] loop: module loaded
[    1.429792] libphy: Fixed MDIO Bus: probed
[    1.429798] tun: Universal TUN/TAP device driver, 1.6
[    1.429800] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.429887] PPP generic driver version 2.4.2
[    1.429990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.429999] ehci-pci: EHCI PCI platform driver
[    1.430017] ehci-platform: EHCI generic platform driver
[    1.430039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.430046] ohci-pci: OHCI PCI platform driver
[    1.430067] ohci-platform: OHCI generic platform driver
[    1.430084] uhci_hcd: USB Universal Host Controller Interface driver
[    1.430342] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.430353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.431518] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    1.431526] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.431690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.431695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.431698] usb usb1: Product: xHCI Host Controller
[    1.431701] usb usb1: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[    1.431703] usb usb1: SerialNumber: 0000:00:14.0
[    1.431910] hub 1-0:1.0: USB hub found
[    1.431937] hub 1-0:1.0: 7 ports detected
[    1.432543] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.432550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.432620] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.432624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.432627] usb usb2: Product: xHCI Host Controller
[    1.432630] usb usb2: Manufacturer: Linux 4.4.0-145-generic xhci-hcd
[    1.432633] usb usb2: SerialNumber: 0000:00:14.0
[    1.432808] hub 2-0:1.0: USB hub found
[    1.432831] hub 2-0:1.0: 6 ports detected
[    1.433297] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.438184] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.438193] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.438419] mousedev: PS/2 mouse device common for all mice
[    1.438731] rtc_cmos 00:06: RTC can wake from S4
[    1.438939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.438984] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[    1.438996] i2c /dev entries driver
[    1.439095] device-mapper: uevent: version 1.0.3
[    1.439207] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.439232] Intel P-state driver initializing.
[    1.439530] ledtrig-cpu: registered to indicate activity on CPUs
[    1.439559] EFI Variables Facility v0.08 2004-May-17
[    1.451224] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.477147] NET: Registered protocol family 10
[    1.477906] NET: Registered protocol family 17
[    1.477938] Key type dns_resolver registered
[    1.478257] microcode: CPU0 sig=0x406c4, pf=0x1, revision=0x408
[    1.478287] microcode: CPU1 sig=0x406c4, pf=0x1, revision=0x408
[    1.478348] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.478609] registered taskstats version 1
[    1.478631] Loading compiled-in X.509 certificates
[    1.480158] Loaded X.509 cert 'Build time autogenerated kernel key: 766cb56454e39ea623681e1efb4bf4db48a2396c'
[    1.480195] zswap: loaded using pool lzo/zbud
[    1.485380] Key type trusted registered
[    1.494094] Key type encrypted registered
[    1.494109] AppArmor: AppArmor sha1 policy hashing enabled
[    1.506051] ima: Allocated hash algorithm: sha1
[    1.521871] ACPI: Battery Slot [BAT1] (battery present)
[    1.613948] evm: HMAC attrs: 0x1
[    1.616000]   Magic number: 15:773:293
[    1.616069] tty tty26: hash matches
[    1.616507] rtc_cmos 00:06: setting system clock to 2019-04-14 19:17:15 UTC (1555269435)
[    1.616911] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.616915] EDD information not available.
[    1.617106] PM: Hibernation image not present or could not be loaded.
[    1.619823] Freeing unused kernel memory: 1484K
[    1.629997] Write protecting the kernel read-only data: 14336k
[    1.631627] Freeing unused kernel memory: 1620K
[    1.632503] Freeing unused kernel memory: 88K
[    1.670295] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.670484] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.670525] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.671216] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.671279] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.692291] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.692347] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.692374] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.692940] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.692981] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.797837] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.816881] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.835416] sdhci: Secure Digital Host Controller Interface driver
[    1.835421] sdhci: Copyright(c) Pierre Ossman
[    1.865904] sdhci-acpi 80860F14:00: No vmmc regulator found
[    1.865911] sdhci-acpi 80860F14:00: No vqmmc regulator found
[    1.877868] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    1.877923] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 35)
[    1.878225] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    1.879694] sdhci-pci 0000:00:12.0: No vmmc regulator found
[    1.879698] sdhci-pci 0000:00:12.0: No vqmmc regulator found
[    1.891726] mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
[    1.892037] ahci 0000:00:13.0: version 3.0
[    1.892337] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.892344] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    1.900416] [drm] Initialized drm 1.1.0 20060810
[    1.901776] scsi host0: ahci
[    1.909796] scsi host1: ahci
[    1.909913] ata1: SATA max UDMA/133 abar m2048@0x9131a000 port 0x9131a100 irq 116
[    1.909918] ata2: SATA max UDMA/133 abar m2048@0x9131a000 port 0x9131a180 irq 116
[    1.911165] sdhci-acpi INT33BB:00: No vmmc regulator found
[    1.911169] sdhci-acpi INT33BB:00: No vqmmc regulator found
[    1.922565] mmc2: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    1.936894] usb 1-3: New USB device found, idVendor=8087, idProduct=07dc
[    1.936901] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.982412] mmc0: MAN_BKOPS_EN bit is not set
[    1.995118] mmc0: new HS200 MMC card at address 0001
[    2.002056] mmcblk0: mmc0:0001 DB4032 29.1 GiB 
[    2.002431] mmcblk0boot0: mmc0:0001 DB4032 partition 1 4.00 MiB
[    2.002790] mmcblk0boot1: mmc0:0001 DB4032 partition 2 4.00 MiB
[    2.003318] mmcblk0rpmb: mmc0:0001 DB4032 partition 3 4.00 MiB
[    2.008315]  mmcblk0: p1 p2 p3
[    2.049817] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    2.050747] [drm] Memory usable by graphics device = 2048M
[    2.050753] checking generic (80000000 410000) vs hw (80000000 10000000)
[    2.050756] fb: switching to inteldrmfb from EFI VGA
[    2.050802] Console: switching to colour dummy device 80x25
[    2.050932] [drm] Replacing VGA console driver
[    2.051176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.051179] [drm] Driver supports precise vblank timestamp query.
[    2.066318] usb 2-1: New USB device found, idVendor=0bda, idProduct=8153
[    2.066324] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    2.066328] usb 2-1: Product: USB 10/100/1000 LAN
[    2.066330] usb 2-1: Manufacturer: Realtek
[    2.066333] usb 2-1: SerialNumber: 000001
[    2.125914] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.177999] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[    2.234211] ata2: SATA link down (SStatus 4 SControl 300)
[    2.234257] ata1: SATA link down (SStatus 4 SControl 300)
[    2.267899] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.268263] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.268492] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    2.336576] fbcon: inteldrmfb (fb0) is primary device
[    2.336680] Console: switching to colour frame buffer device 170x48
[    2.336717] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.343267] mmc1: new ultra high speed SDR104 SDXC card at address aaaa
[    2.344469] mmcblk1: mmc1:aaaa SL64G 59.5 GiB 
[    2.350595]  mmcblk1: p1 p2 p3 < p5 p6 >
[    2.361633] tsc: Refined TSC clocksource calibration: 1599.940 MHz
[    2.361640] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170fec5cb5e, max_idle_ns: 440795272760 ns
[    2.366385] usb 1-4: New USB device found, idVendor=1d57, idProduct=0001
[    2.366391] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.366395] usb 1-4: Product: 2.4G Mouse
[    2.366398] usb 1-4: Manufacturer: 2.4G KB
[    2.366614] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.366625] usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.458039] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x5e0f01)
[    2.472311] psmouse serio1: elantech: Synaptics capabilities query result 0x71, 0x15, 0x0a.
[    2.486377] psmouse serio1: elantech: Elan sample query result 02, 17, 97
[    2.533631] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.563389] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.687065] usb 1-5: New USB device found, idVendor=5986, idProduct=0673
[    2.687090] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.687107] usb 1-5: Product: Lenovo EasyCamera
[    2.687121] usb 1-5: Manufacturer: Bison Corp.
[    2.687142] usb 1-5: SerialNumber: 200901010001
[    2.699699] hidraw: raw HID events driver (C) Jiri Kosina
[    2.714128] usbcore: registered new interface driver usbhid
[    2.714133] usbhid: USB HID core driver
[    2.717406] input: 2.4G KB 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1D57:0001.0001/input/input7
[    2.770336] hid-generic 0003:1D57:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G KB 2.4G Mouse] on usb-0000:00:14.0-4/input0
[    2.770816] input: 2.4G KB 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:1D57:0001.0002/input/input8
[    2.826231] hid-generic 0003:1D57:0001.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G KB 2.4G Mouse] on usb-0000:00:14.0-4/input1
[    2.955556] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.276500] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.276768] systemd[1]: Detected architecture x86-64.
[    3.277322] systemd[1]: Set hostname to <cvaporta16>.
[    3.361737] clocksource: Switched to clocksource tsc
[    3.476177] systemd[1]: Created slice User and Session Slice.
[    3.476335] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.476361] systemd[1]: Reached target Remote File Systems (Pre).
[    3.476443] systemd[1]: Listening on udev Control Socket.
[    3.476585] systemd[1]: Created slice System Slice.
[    3.476615] systemd[1]: Reached target Slices.
[    3.476768] systemd[1]: Listening on Journal Audit Socket.
[    3.476871] systemd[1]: Listening on Journal Socket.
[    3.490471] systemd[1]: Starting Set console keymap...
[    3.491864] systemd[1]: Mounting Huge Pages File System...
[    3.492110] systemd[1]: Listening on Syslog Socket.
[    3.493359] systemd[1]: Mounting Debug File System...
[    3.493950] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.494139] systemd[1]: Listening on udev Kernel Socket.
[    3.494328] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    3.495083] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.498543] systemd[1]: Starting Journal Service...
[    3.499925] systemd[1]: Starting Uncomplicated firewall...
[    3.501274] systemd[1]: Mounting POSIX Message Queue File System...
[    3.506080] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.506247] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.511947] systemd[1]: Started Read required files in advance.
[    3.514802] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.515055] systemd[1]: Reached target Encrypted Volumes.
[    3.516295] systemd[1]: Started Braille Device Support.
[    3.516629] systemd[1]: Reached target Remote File Systems.
[    3.516684] systemd[1]: Reached target User and Group Name Lookups.
[    3.527986] systemd[1]: Starting Load Kernel Modules...
[    3.529361] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.534777] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.543297] systemd[1]: Mounted POSIX Message Queue File System.
[    3.543381] systemd[1]: Mounted Huge Pages File System.
[    3.543423] systemd[1]: Mounted Debug File System.
[    3.544119] systemd[1]: Started Uncomplicated firewall.
[    3.544634] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.554361] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    3.557318] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.611900] lp: driver loaded but no devices found
[    3.626083] ppdev: user-space parallel port driver
[    3.634006] systemd[1]: Starting udev Coldplug all Devices...
[    3.635252] systemd[1]: Starting Load/Save Random Seed...
[    3.636603] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.664079] systemd[1]: Started Load Kernel Modules.
[    3.666897] systemd[1]: Started Load/Save Random Seed.
[    3.711170] systemd[1]: Started Journal Service.
[    3.863107] systemd-journald[199]: Received request to flush runtime journal from PID 1
[    4.152844] wmi: Mapper loaded
[    4.175651] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[    4.286331] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.306783] Bluetooth: Core ver 2.21
[    4.308021] NET: Registered protocol family 31
[    4.308025] Bluetooth: HCI device and connection manager initialized
[    4.308032] Bluetooth: HCI socket layer initialized
[    4.308037] Bluetooth: L2CAP socket layer initialized
[    4.308047] Bluetooth: SCO socket layer initialized
[    4.328773] usbcore: registered new interface driver btusb
[    4.359388] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[    4.392591] media: Linux media interface: v0.10
[    4.415048] Linux video capture interface: v2.00
[    4.419609] r8152: loading out-of-tree module taints kernel.
[    4.419738] r8152: module verification failed: signature and/or required key missing - tainting kernel
[    4.422516] usbcore: registered new interface driver r8152
[    4.424860] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    4.448772] Intel(R) Wireless WiFi driver for Linux
[    4.448779] Copyright(c) 2003- 2015 Intel Corporation
[    4.456092] usbcore: registered new interface driver cdc_ether
[    4.531467] iwlwifi 0000:02:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[    4.533832] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[    4.541926] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0673)
[    4.549236] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10
[    4.549368] usbcore: registered new interface driver uvcvideo
[    4.549371] USB Video Class driver (1.1.1)
[    4.588243] SSE version of gcm_enc/dec engaged.
[    4.600427] r8152 2-1:1.0 eth0: v2.11.0 (2018/12/21)
[    4.600430] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
               		US6,570,884, US6,115,776, and US6,327,625.
               
[    4.632765] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    4.670380] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    4.670644] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[    4.670897] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[    4.794568] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.818244] kvm: disabled by bios
[    4.852789] kvm: disabled by bios
[    4.856578] random: nonblocking pool is initialized
[    4.860693] intel_rapl: Found RAPL domain package
[    4.860700] intel_rapl: Found RAPL domain core
[    4.978739] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.066878] cfg80211: World regulatory domain updated:
[    5.066886] cfg80211:  DFS Master region: unset
[    5.066889] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.066893] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.066897] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.066899] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.066902] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.066906] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.066909] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.066911] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.066914] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    5.491986] Adding 1941500k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:1941500k SSFS
[    5.494048] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.587321] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.587329] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.587332] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    5.587335] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.587338] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.587342] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    5.587345] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.636444] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.636564] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.636673] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.018331] r8152 2-1:1.0 enx00e04c68004a: renamed from eth0
[    6.325131] audit: type=1400 audit(1555269440.201:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=688 comm="apparmor_parser"
[    6.325148] audit: type=1400 audit(1555269440.201:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser"
[    6.325159] audit: type=1400 audit(1555269440.201:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=688 comm="apparmor_parser"
[    6.325168] audit: type=1400 audit(1555269440.201:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser"
[    6.326696] audit: type=1400 audit(1555269440.205:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=687 comm="apparmor_parser"
[    6.326712] audit: type=1400 audit(1555269440.205:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=687 comm="apparmor_parser"
[    6.330235] audit: type=1400 audit(1555269440.209:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=691 comm="apparmor_parser"
[    6.339441] audit: type=1400 audit(1555269440.217:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=693 comm="apparmor_parser"
[    6.339461] audit: type=1400 audit(1555269440.217:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=693 comm="apparmor_parser"
[    6.375278] audit_printk_skb: 36 callbacks suppressed
[    6.375284] audit: type=1400 audit(1555269440.253:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=708 comm="apparmor_parser"
[    6.375301] audit: type=1400 audit(1555269440.253:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser"
[    6.375312] audit: type=1400 audit(1555269440.253:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=708 comm="apparmor_parser"
[    6.375323] audit: type=1400 audit(1555269440.253:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser"
[    6.375448] audit: type=1400 audit(1555269440.253:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=707 comm="apparmor_parser"
[    6.385652] audit: type=1400 audit(1555269440.265:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=707 comm="apparmor_parser"
[    6.394754] audit: type=1400 audit(1555269440.273:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=714 comm="apparmor_parser"
[    6.405005] audit: type=1400 audit(1555269440.281:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=710 comm="apparmor_parser"
[    6.422065] audit: type=1400 audit(1555269440.305:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=710 comm="apparmor_parser"
[    6.422092] audit: type=1400 audit(1555269440.305:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=710 comm="apparmor_parser"
[    6.833576] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.833582] Bluetooth: BNEP filters: protocol multicast
[    6.833593] Bluetooth: BNEP socket layer initialized
[    7.562451] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.585761] IPv6: ADDRCONF(NETDEV_UP): enx00e04c68004a: link is not ready
[    7.593149] IPv6: ADDRCONF(NETDEV_UP): enx00e04c68004a: link is not ready
[    7.612133] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c68004a: link becomes ready
[    7.612390] r8152 2-1:1.0 enx00e04c68004a: carrier on
[   15.805533] Bluetooth: RFCOMM TTY layer initialized
[   15.805550] Bluetooth: RFCOMM socket layer initialized
[   15.805563] Bluetooth: RFCOMM ver 1.11
[   19.557920] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 2123.523634] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 2123.523913] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 2123.624547] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 2123.624815] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 2123.651545] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2123.758219] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2130.388814] wlp2s0: authenticate with e4:40:e2:b7:f6:9d
[ 2130.395507] wlp2s0: send auth to e4:40:e2:b7:f6:9d (try 1/3)
[ 2130.397455] wlp2s0: authenticated
[ 2130.397915] iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[ 2130.397922] iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[ 2130.401907] wlp2s0: associate with e4:40:e2:b7:f6:9d (try 1/3)
[ 2130.406846] wlp2s0: RX AssocResp from e4:40:e2:b7:f6:9d (capab=0x411 status=0 aid=1)
[ 2130.409334] wlp2s0: associated
[ 2130.409409] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2603.965392] wlp2s0: deauthenticating from e4:40:e2:b7:f6:9d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2604.017811] cfg80211: World regulatory domain updated:
[ 2604.017818] cfg80211:  DFS Master region: unset
[ 2604.017820] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2604.017824] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2604.017828] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2604.017830] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2604.017834] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2604.017837] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2604.017840] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2604.017843] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2604.017845] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

cva106

Re : Ethernet filaire via adaptateur USB3

merci xubu1957 !
je n'avais jamais utilisé

Iamawalrus

Re : Ethernet filaire via adaptateur USB3

À priori aucun rapport avec le fichier tlp qui n'existe pas sous Ubuntu.

Du coup que dit  :

ip a show eth0

---

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

Iamawalrus

Re : Ethernet filaire via adaptateur USB3

Par ici le dernier commentaire propose une de rajouter une règle udev, dans /etc/udev/rules.d/

https://askubuntu.com/questions/1044127 … connecting

---

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

cva106

Re : Ethernet filaire via adaptateur USB3

Réponse à

ip a show eth0
Device "eth0" does not exist.

Pour ce qui est de rajouter une règle udev, je ne vois pas bien ce qu'il faut faire. L'anglais n'y aide pas.

Dernière modification par cva106 (Le 15/04/2019, à 21:27)

cva106

Re : Ethernet filaire via adaptateur USB3

Le répertoire  /etc/udev/rules.d/ existe mais vide, pas de fichier 50-cpu-custom.rules   !

Iamawalrus

Re : Ethernet filaire via adaptateur USB3

Le répertoire  /etc/udev/rules.d/ existe mais vide, pas de fichier 50-cpu-custom.rules   !

Oui il faut le créer, et rajouter les deux lignes dedans.

---

"Tout le rêve de la démocratie est d'élever le prolétaire au niveau de bêtise du bourgeois."

cva106

Re : Ethernet filaire via adaptateur USB3

Me revoilà, je n'ai pas pu m'en occuper avant.
Donc j'ai copié les 2 lignes dans un éditeur et enregistrer sous le nom 50-cpu-custum.rules dans le répertoire etc/udev/rules.d
J'ai redémarré
Et... rien de mieux !

Dernière modification par cva106 (Le 18/04/2019, à 22:29)