Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.04 LTS
Ubuntu-fr propose des clés USB de Ubuntu et toutes ses « saveurs » ainsi qu'un magnifique t-shirt pour cette toute nouvelle version d'Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 25/04/2018, à 14:51

winux

Ub18.04 très lent après le login

Bonjour

J'ai un peu le même Pb que Christophe C à ceci près que moi c'est après le login. Il se passe en effet 45s (moi aussi) entre le moment où j'ai entré Id+Pass et le moment où je vois mon bureau, entre temps c'est l'écran noir.
Ce n'était pas le cas avant, ça s'est produit depuis une mise à jour récente ???!!!
Est-ce un bug ?

Dernière modification par winux (Le 26/04/2018, à 11:34)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#2 Le 25/04/2018, à 15:57

malbo

Re : Ub18.04 très lent après le login

winux a écrit :

Il se passe en effet 45s

Ce temps de 45 secondes, c'est souvent un temps pris par systemd quand il y a une couille dans le fichier fstab (une instruction de montage qu'il n'arrive pas à réaliser pour une raison ou une autre). Je te suggère de faire un Boot-Info depuis une session de ton Ubuntu installé afin qu'on puisse le vérifier. Pour ce faire, tu suivras la partie "Cas où au moins un ubuntu installé sur disque est opérationnel" du paragraphe 1.1 Installation, puis le paragraphe 1.2 Utilisation . Tu donneras l'URL du Boot-Info dans ta réponse.

Dernière modification par malbo (Le 25/04/2018, à 15:59)

Hors ligne

#3 Le 25/04/2018, à 16:29

GammaDraconis

Re : Ub18.04 très lent après le login

Tu n'aurais pas déplacé ton /home dans un disque dur différent que ta racine par hasard ? (cad la racine et le /home pas sur le même disque dur physique).

Dernière modification par GammaDraconis (Le 25/04/2018, à 16:31)

Hors ligne

#4 Le 25/04/2018, à 20:22

winux

Re : Ub18.04 très lent après le login

malbo a écrit :

faire un Boot-Info

Merci pour ta réponse malbo (toujours prêt à aider smile)
voici le résultat
http://paste.ubuntu.com/p/gXsg8vB8gc/
J'espère que tu verras quelque chose ?

Pour info j'ai installé la version d'il y a un mois environ et mis à jour régulièrement.
Est-ce que ça peut jouer vis-à-vis du Pb
Merci


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#5 Le 25/04/2018, à 20:35

winux

Re : Ub18.04 très lent après le login

GammaDraconis a écrit :

Tu n'aurais pas déplacé ton /home dans un disque dur différent que ta racine par hasard ? (cad la racine et le /home pas sur le même disque dur physique).

Merci pour ta réponse GammaDraconis
En fait sur cette version je n'ai pas fait de /home car comme j'ai fait tout de suite une sauvegarde avec Partimage (d'où EXT3 et non EXT4) je n'en ai pas besoin, contrairement à mon approche 16.04
Donc pour répondre à ta question, je n'ai pas déplacé /home

Voici mon Gparted
http://tinypic.com/r/dm79qd/9

Dernière modification par winux (Le 25/04/2018, à 21:01)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#6 Le 25/04/2018, à 21:00

malbo

Re : Ub18.04 très lent après le login

Le Boot-Info dont tu as donné le lien dans le post #4 est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos8)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => libparted MBR boot code is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe 
                       /ntldr /NTDETECT.COM

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda8: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *             63   208,726,015   208,725,953   7 NTFS / exFAT / HPFS
/dev/sda2         208,730,110   368,480,255   159,750,146   5 Extended
/dev/sda5         284,508,160   337,756,206    53,248,047  83 Linux
/dev/sda6         337,758,208   360,286,207    22,528,000  83 Linux
/dev/sda7         360,288,256   368,480,255     8,192,000  82 Linux swap / Solaris
/dev/sda8         208,730,112   284,505,502    75,775,391  83 Linux
/dev/sda3         368,480,256 1,437,427,711 1,068,947,456   7 NTFS / exFAT / HPFS
/dev/sda4       1,437,427,712 1,953,523,711   516,096,000   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 1,953,523,711 1,953,521,664   7 NTFS / exFAT / HPFS


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        D4C4A16DC4A15312                       ntfs       W10
/dev/sda3        4978220639DB477E                       ntfs       DATA-GG
/dev/sda4        4FF9220B09734A52                       ntfs       SOURCE
/dev/sda5        23e0cd87-8a7f-46f8-b714-84bf27568eac   ext3       Ub 16.04 syst
/dev/sda6        c6315ae0-0440-47e3-b7cb-0425d40de564   ext3       Ub 16.04 home
/dev/sda7        d2256e5a-8705-45bd-a66e-72aeed12336f   swap       
/dev/sda8        5efe16f0-a893-4466-ad9d-ff6a19d63f03   ext3       Ubuntu 18.04
/dev/sdb1        38B9BF065512B6CC                       ntfs       BACK-UP

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Apr 25 18:45 ata-PIONEER_DVD-RW_DVR-219L_KAQC317522WL -> ../../sr0
lrwxrwxrwx 1 root root  9 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR1666075 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR1666075-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 25 19:08 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 25 19:08 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Apr 25 19:03 ata-WDC_WD1001FAES-00W7A0_WD-WCATR3550779-part8 -> ../../sda8
lrwxrwxrwx 1 root root  9 Apr 25 19:03 wwn-0x50014ee25a5369c9 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 25 19:08 wwn-0x50014ee25a5369c9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 25 19:08 wwn-0x50014ee25a5369c9-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee25a5369c9-part8 -> ../../sda8
lrwxrwxrwx 1 root root  9 Apr 25 19:03 wwn-0x50014ee2af4ff466 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 25 19:03 wwn-0x50014ee2af4ff466-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda3        /media/DATA-GG           fuseblk    (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda8        /                        ext3       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /media/BACK-UP           fuseblk    (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
else
  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=640x480,1920x1080x32
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
	else
	  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
	fi
        linux	/boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-119-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
	menuentry 'Ubuntu, avec Linux 4.4.0-119-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-119-generic-advanced-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-119-generic…'
	        linux	/boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-119-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-119-generic-init-upstart-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-119-generic…'
	        linux	/boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-119-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-119-generic-recovery-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-119-generic…'
	        linux	/boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-116-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-116-generic-advanced-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-116-generic…'
	        linux	/boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-116-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-116-generic-init-upstart-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-116-generic…'
	        linux	/boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-116-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-116-generic-recovery-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-116-generic…'
	        linux	/boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-112-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-advanced-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-init-upstart-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-112-generic-recovery-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		echo	'Chargement de Linux 4.4.0-112-generic…'
	        linux	/boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-112-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-D4C4A16DC4A15312' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  D4C4A16DC4A15312
	else
	  search --no-floppy --fs-uuid --set=root D4C4A16DC4A15312
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Ubuntu Bionic Beaver (development branch) (18.04) (sur /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
	else
	  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
	fi
	linux /boot/vmlinuz-4.15.0-13-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-13-generic
}
submenu 'Options avancées pour Ubuntu Bionic Beaver (development branch) (18.04) (sur /dev/sda8)' $menuentry_id_option 'osprober-gnulinux-advanced-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
	menuentry 'Ubuntu (sur /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-13-generic--5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		linux /boot/vmlinuz-4.15.0-13-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-13-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-13-generic (sur /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-13-generic--5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		linux /boot/vmlinuz-4.15.0-13-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-13-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-13-generic (recovery mode) (sur /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-13-generic-root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro recovery nomodeset-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		linux /boot/vmlinuz-4.15.0-13-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-13-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac /               ext3    errors=remount-ro 0       1
# /home was on /dev/sda8 during installation
UUID=c6315ae0-0440-47e3-b7cb-0425d40de564 /home           ext3    defaults        0       2
# swap was on /dev/sda9 during installation
UUID=d2256e5a-8705-45bd-a66e-72aeed12336f none            swap    sw              0       0
# /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

UUID=4978220639DB477E   /media/DATA-GG   ntfs-3g   defaults,utf8,umask=000,gid=46  0  1 
UUID=38B9BF065512B6CC   /media/BACK-UP   ntfs-3g   defaults,utf8,umask=000,gid=46  0  1 
UUID=4FF9220B09734A52   /media/SOURCE   ntfs-3g   defaults,utf8,umask=000,gid=46  0  1 
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 157.183418274 = 168.774410240  boot/grub/grub.cfg                             5
 146.953208923 = 157.789806592  boot/grub/i386-pc/core.img                     1
 147.604274750 = 158.488883200  boot/vmlinuz-4.4.0-112-generic                 8
 157.959774017 = 169.608015872  boot/vmlinuz-4.4.0-116-generic                 7
 153.084777832 = 164.373528576  boot/vmlinuz-4.4.0-119-generic                 8
 153.084777832 = 164.373528576  vmlinuz                                        8
 157.959774017 = 169.608015872  vmlinuz.old                                    7
 152.332675934 = 163.565965312  boot/initrd.img-4.4.0-112-generic              6
 154.278137207 = 165.654888448  boot/initrd.img-4.4.0-116-generic             11
 155.114086151 = 166.552481792  boot/initrd.img-4.4.0-119-generic              8
 155.114086151 = 166.552481792  initrd.img                                     8
 154.278137207 = 165.654888448  initrd.img.old                                11

=========================== sda8/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
else
  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=640x480,800x600,1280x1024,1920x1080
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
	else
	  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
	fi
        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
	menuentry 'Ubuntu, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-19-generic-advanced-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		echo	'Chargement de Linux 4.15.0-19-generic…'
	        linux	/boot/vmlinuz-4.15.0-19-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-19-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-19-generic-recovery-5efe16f0-a893-4466-ad9d-ff6a19d63f03' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8  5efe16f0-a893-4466-ad9d-ff6a19d63f03
		else
		  search --no-floppy --fs-uuid --set=root 5efe16f0-a893-4466-ad9d-ff6a19d63f03
		fi
		echo	'Chargement de Linux 4.15.0-19-generic…'
	        linux	/boot/vmlinuz-4.15.0-19-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-19-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-D4C4A16DC4A15312' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  D4C4A16DC4A15312
	else
	  search --no-floppy --fs-uuid --set=root D4C4A16DC4A15312
	fi
	parttool ${root} hidden-
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Ubuntu 16.04.4 LTS (16.04) (sur /dev/sda5)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
	else
	  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
	fi
	linux /boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.4.0-119-generic
}
submenu 'Options avancées pour Ubuntu 16.04.4 LTS (16.04) (sur /dev/sda5)' $menuentry_id_option 'osprober-gnulinux-advanced-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
	menuentry 'Ubuntu (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-119-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-119-generic (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-119-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-119-generic (upstart) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-119-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff init=/sbin/upstart
		initrd /boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-119-generic (recovery mode) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-119-generic-root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-119-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset
		initrd /boot/initrd.img-4.4.0-119-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-116-generic (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-116-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-116-generic (upstart) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-116-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff init=/sbin/upstart
		initrd /boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-116-generic (recovery mode) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-116-generic-root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-116-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset
		initrd /boot/initrd.img-4.4.0-116-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-112-generic (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-112-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (upstart) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-112-generic--23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro quiet splash $vt_handoff init=/sbin/upstart
		initrd /boot/initrd.img-4.4.0-112-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-112-generic (recovery mode) (sur /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-112-generic-root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset-23e0cd87-8a7f-46f8-b714-84bf27568eac' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  23e0cd87-8a7f-46f8-b714-84bf27568eac
		else
		  search --no-floppy --fs-uuid --set=root 23e0cd87-8a7f-46f8-b714-84bf27568eac
		fi
		linux /boot/vmlinuz-4.4.0-112-generic root=UUID=23e0cd87-8a7f-46f8-b714-84bf27568eac ro recovery nomodeset
		initrd /boot/initrd.img-4.4.0-112-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda8/etc/fstab: ================================

--------------------------------------------------------------------------------

# <file system> <mount point>   <type>  <options>       <dump>  <pass>

# / was on /dev/sda8 during installation
UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 /               ext3    errors=remount-ro 0       1

# swap was on /dev/sda7 during installation
UUID=d2256e5a-8705-45bd-a66e-72aeed12336f none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

# DATA-GG
UUID=4978220639DB477E   /media/DATA-GG   ntfs-3g   defaults,utf8,umask=000,gid=46  0  1 

# BACK-UP
UUID=38B9BF065512B6CC   /media/BACK-UP   ntfs-3g   defaults,utf8,umask=000,gid=46  0  1 

--------------------------------------------------------------------------------

=================== sda8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 123.847343445 = 132.980072448  boot/grub/grub.cfg                             5
 116.911235809 = 125.532483584  boot/grub/i386-pc/core.img                     1
 129.971546173 = 139.555885056  boot/vmlinuz-4.15.0-19-generic                 8
 117.592639923 = 126.264135680  boot/vmlinuz-4.15.0-20-generic                 7
 117.592639923 = 126.264135680  vmlinuz                                        7
 129.971546173 = 139.555885056  vmlinuz.old                                    8
 127.994403839 = 137.432944640  boot/initrd.img-4.15.0-19-generic              8
 131.338157654 = 141.023272960  boot/initrd.img-4.15.0-20-generic              8
 131.338157654 = 141.023272960  initrd.img                                     8
 127.994403839 = 137.432944640  initrd.img.old                                 8


ADDITIONAL INFORMATION :
=================== log of boot-info 20180425_1902 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda8:L'OS actuellement utilisé - Ubuntu 18.04 LTS CurrentSession:linux
/dev/sda1:Windows 10:Windows:chain
/dev/sda5:Ubuntu 16.04.4 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: LABEL="W10" UUID="D4C4A16DC4A15312" TYPE="ntfs" PARTUUID="96219621-01"
/dev/sda3: LABEL="DATA-GG" UUID="4978220639DB477E" TYPE="ntfs" PARTUUID="96219621-03"
/dev/sda4: LABEL="SOURCE" UUID="4FF9220B09734A52" TYPE="ntfs" PARTUUID="96219621-04"
/dev/sda5: LABEL="Ub 16.04 syst" UUID="23e0cd87-8a7f-46f8-b714-84bf27568eac" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="96219621-05"
/dev/sda6: LABEL="Ub 16.04 home" UUID="c6315ae0-0440-47e3-b7cb-0425d40de564" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="96219621-06"
/dev/sda7: UUID="d2256e5a-8705-45bd-a66e-72aeed12336f" TYPE="swap" PARTUUID="96219621-07"
/dev/sda8: LABEL="Ubuntu 18.04" UUID="5efe16f0-a893-4466-ad9d-ff6a19d63f03" TYPE="ext3" PARTUUID="96219621-08"
/dev/sdb1: LABEL="BACK-UP" UUID="38B9BF065512B6CC" TYPE="ntfs" PARTUUID="000143d2-01"


1 disks with OS, 3 OS : 2 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril  2 09:39 grub.d
total 80
-rwxr-xr-x 1 root root  9783 mars   4 14:11 00_header
-rwxr-xr-x 1 root root  6258 mars   4 14:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4 14:11 10_linux
-rwxr-xr-x 1 root root 11298 mars   4 14:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4 14:11 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4 14:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4 14:11 40_custom
-rwxr-xr-x 1 root root   216 mars   4 14:11 41_custom
-rw-r--r-- 1 root root   483 mars   4 14:11 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=640x480,800x600,1280x1024,1920x1080

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda5/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 févr. 26 08:44 grub.d
total 80
-rwxr-xr-x 1 root root  9791 avril 16  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars  24  2017 10_linux
-rwxr-xr-x 1 root root 11082 avril 16  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 16  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 avril 16  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 16  2016 40_custom
-rwxr-xr-x 1 root root   216 avril 16  2016 41_custom
-rw-r--r-- 1 root root   483 avril 16  2016 README




=================== sda5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=640x480,1920x1080x32

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
# GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
# GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda8	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	ntldr,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/DATA-GG.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.
sda6	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda6.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/BACK-UP.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	63 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD1001FAES-0:;
1:32.3kB:107GB:107GB:ntfs::boot;
2:107GB:189GB:81.8GB:::;
8:107GB:146GB:38.8GB:ext3::;
5:146GB:173GB:27.3GB:ext3::;
6:173GB:184GB:11.5GB:ext3::;
7:184GB:189GB:4194MB:linux-swap(v1)::;
3:189GB:736GB:547GB:ntfs::;
4:736GB:1000GB:264GB:ntfs::;

BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:ATA WDC WD1001FAES-0:;
1:1049kB:1000GB:1000GB:ntfs::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
fd0   disk              4K
loop0 loop squashfs  86,6M
loop1 loop squashfs   140M
loop2 loop squashfs  81,7M
loop3 loop squashfs    21M
loop4 loop squashfs  86,5M
loop5 loop squashfs   3,3M
loop6 loop squashfs  12,2M
loop7 loop squashfs   1,6M
sda   disk          931,5G
sda1  part ntfs      99,5G W10
sda2  part              1K
sda3  part ntfs     509,7G DATA-GG
sda4  part ntfs     246,1G SOURCE
sda5  part ext3      25,4G Ub 16.04 syst
sda6  part ext3      10,8G Ub 16.04 home
sda7  part swap       3,9G
sda8  part ext3      36,1G Ubuntu 18.04
sdb   disk iso9660  931,5G 20160210-wily-amd64
sdb1  part ntfs     931,5G BACK-UP
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
fd0      1  0  1
loop0    1  1  0         /snap/core/4486
loop1    1  1  0         /snap/gnome-3-26-1604/59
loop2    1  1  0         /snap/core/4206
loop3    1  1  0         /snap/gnome-logs/25
loop4    1  1  0         /snap/core/4407
loop5    1  1  0         /snap/gnome-system-monitor/36
loop6    1  1  0         /snap/gnome-characters/69
loop7    1  1  0         /snap/gnome-calculator/154
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0
sda3     1  0  0         /media/DATA-GG
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         /mnt/boot-sav/sda6
sda7     1  0  0         [SWAP]
sda8     1  0  0         /
sdb      1  0  0 running
sdb1     1  0  0         /media/BACK-UP
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1981812k,nr_inodes=495453,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=402248k,mode=755)
/dev/sda8 on / type ext3 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2317)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4206.snap on /snap/core/4206 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4407.snap on /snap/core/4407 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sdb1 on /media/BACK-UP type fuseblk (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda3 on /media/DATA-GG type fuseblk (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
tmpfs on /run/user/119 type tmpfs (rw,nosuid,nodev,relatime,size=402244k,mode=700,uid=119,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=402244k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext3 (rw,relatime,data=ordered)
/dev/sda6 on /mnt/boot-sav/sda6 type ext3 (rw,relatime,data=ordered)


=================== ls:
/sys/block/fd0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd fd0 full fuse gpiochip0 hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  c0 e7 70 0c 00 00 00 00  |..........p.....|
00000030  00 00 0c 00 00 00 00 00  ac fe 9f 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  12 53 a1 c4 6d a1 c4 d4  |.........S..m...|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 90 f6 15  |........?.......|
00000020  00 00 00 00 80 00 80 00  f8 d7 b6 3f 00 00 00 00  |...........?....|
00000030  04 00 00 00 00 00 00 00  ff 4f c3 00 00 00 00 00  |.........O......|
00000040  f6 00 00 00 01 00 00 00  7e 47 db 39 06 22 78 49  |........~G.9."xI|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 68 ad 55  |........?....h.U|
00000020  00 00 00 00 80 00 80 00  f8 ff c2 1e 00 00 00 00  |................|
00000030  04 00 00 00 00 00 00 00  ff 2f ec 01 00 00 00 00  |........./......|
00000040  f6 00 00 00 01 00 00 00  52 4a 73 09 0b 22 f9 4f  |........RJs..".O|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 5f 70 74 00 00 00 00  |........._pt....|
00000030  04 00 00 00 00 00 00 00  ff 05 47 07 00 00 00 00  |..........G.....|
00000040  f6 00 00 00 01 00 00 00  cc b6 12 55 06 bf b9 38  |...........U...8|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     393M  3.3M  390M   1% /run
/dev/sda8      ext3       36G  9.2G   25G  28% /
tmpfs          tmpfs     2.0G   29M  1.9G   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
/dev/loop1     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/59
/dev/loop2     squashfs   82M   82M     0 100% /snap/core/4206
/dev/loop0     squashfs   87M   87M     0 100% /snap/core/4486
/dev/loop6     squashfs   13M   13M     0 100% /snap/gnome-characters/69
/dev/loop7     squashfs  1.7M  1.7M     0 100% /snap/gnome-calculator/154
/dev/loop3     squashfs   21M   21M     0 100% /snap/gnome-logs/25
/dev/loop4     squashfs   87M   87M     0 100% /snap/core/4407
/dev/loop5     squashfs  3.4M  3.4M     0 100% /snap/gnome-system-monitor/36
/dev/sdb1      fuseblk   932G  853G   80G  92% /media/BACK-UP
/dev/sda3      fuseblk   510G  113G  397G  23% /media/DATA-GG
tmpfs          tmpfs     393M   12K  393M   1% /run/user/119
tmpfs          tmpfs     393M   24K  393M   1% /run/user/1000
/dev/sda1      fuseblk   100G   36G   65G  36% /mnt/boot-sav/sda1
/dev/sda4      fuseblk   247G   58G  190G  24% /mnt/boot-sav/sda4
/dev/sda5      ext3       25G  5.9G   18G  25% /mnt/boot-sav/sda5
/dev/sda6      ext3       11G  1.7G  8.4G  17% /mnt/boot-sav/sda6

=================== fdisk -l:
Disk /dev/loop0: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 81.7 MiB, 85692416 bytes, 167368 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 86.5 MiB, 90726400 bytes, 177200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x96219621

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sda1  *            63  208726015  208725953  99.5G  7 HPFS/NTFS/exFAT
/dev/sda2        208730110  368480255  159750146  76.2G  5 Extended
/dev/sda3        368480256 1437427711 1068947456 509.7G  7 HPFS/NTFS/exFAT
/dev/sda4       1437427712 1953523711  516096000 246.1G  7 HPFS/NTFS/exFAT
/dev/sda5        284508160  337756206   53248047  25.4G 83 Linux
/dev/sda6        337758208  360286207   22528000  10.8G 83 Linux
/dev/sda7        360288256  368480255    8192000   3.9G 82 Linux swap / Solaris
/dev/sda8        208730112  284505502   75775391  36.1G 83 Linux

Partition table entries are not in disk order.




Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000143d2

Device     Boot Start        End    Sectors   Size Id Type
/dev/sdb1        2048 1953523711 1953521664 931.5G  7 HPFS/NTFS/exFAT




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda8 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA WDC WD1001FAES-0) !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 18.04 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Tout est normal selon moi dans ce Boot-Info et mon hypothèse d'une anomalie dans le fstab de Ubuntu 18.04 est fausse. Je ne sais pas si on pourra le voir dedans mais ça serait utile que tu passes la commande suivante dans un terminal :

dmesg

et que tu colles le retour complet de cette commande dans ta réponse en utilisant les indications de ce post de moko138 : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731

Hors ligne

#7 Le 25/04/2018, à 21:15

winux

Re : Ub18.04 très lent après le login

Merci pour ton retour rapide malbo
je suis le guide de réponse que tu m'as indiqué

1- le prompt initial

 gerard@PC4:~$ 

2- la commande

 dmesg 

3- la réponse du système à la commande incluant le prompt final

 gerard@PC4:~$ dmesg
[    0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7cffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df7d0000-0x00000000df7d2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7d3000-0x00000000df7dffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P67A-UD3-B3/P67A-UD3-B3, BIOS F2 02/22/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4096M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf7d0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5a20-0x000f5a2f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0xb4b3e000, 0xb4b3efff] PGTABLE
[    0.000000] BRK [0xb4b3f000, 0xb4b3ffff] PGTABLE
[    0.000000] BRK [0xb4b40000, 0xb4b40fff] PGTABLE
[    0.000000] BRK [0xb4b41000, 0xb4b41fff] PGTABLE
[    0.000000] BRK [0xb4b42000, 0xb4b42fff] PGTABLE
[    0.000000] BRK [0xb4b43000, 0xb4b43fff] PGTABLE
[    0.000000] BRK [0xb4b44000, 0xb4b44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31961000-0x34ca7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7180 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000DF7D3040 00004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000DF7D3100 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000DF7D31C0 00469B (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.000000] ACPI: FACS 0x00000000DF7D0000 000040
[    0.000000] ACPI: HPET 0x00000000DF7D79C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000DF7D7A40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: ASPT 0x00000000DF7D7B00 000034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.000000] ACPI: SSPT 0x00000000DF7D7B40 00239C (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.000000] ACPI: EUDS 0x00000000DF7D9EE0 0000C0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: MATS 0x00000000DF7D9FA0 000034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 0x00000000DF7DA000 000A3A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000DF7D78C0 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000DF7DAA40 001F4C (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f7d3000-0x11f7fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df7cffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f7fffff]
[    0.000000] On node 0 totalpages: 1044332
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14240 pages used for memmap
[    0.000000]   DMA32 zone: 911312 pages, LIFO batch:31
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7d0000-0xdf7d2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7d3000-0xdf7dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027991
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3963592K/4177328K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 213736K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3292.660 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.32 BogoMIPS (lpj=13170640)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 9 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032056] TSC deadline timer enabled
[    0.032058] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032110] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032126] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.032128] ... version:                3
[    0.032129] ... bit width:              48
[    0.032129] ... generic registers:      8
[    0.032130] ... value mask:             0000ffffffffffff
[    0.032130] ... max period:             00007fffffffffff
[    0.032131] ... fixed-purpose events:   3
[    0.032131] ... event mask:             00000007000000ff
[    0.032160] Hierarchical SRCU implementation.
[    0.032972] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032984] smp: Bringing up secondary CPUs ...
[    0.033040] x86: Booting SMP configuration:
[    0.033041] .... node  #0, CPUs:      #1 #2 #3
[    0.038324] smp: Brought up 1 node, 4 CPUs
[    0.038324] smpboot: Max logical packages: 2
[    0.038324] smpboot: Total of 4 processors activated (26341.28 BogoMIPS)
[    0.040160] devtmpfs: initialized
[    0.040160] x86/mm: Memory block size: 128MB
[    0.040327] evm: security.selinux
[    0.040327] evm: security.SMACK64
[    0.040327] evm: security.SMACK64EXEC
[    0.040328] evm: security.SMACK64TRANSMUTE
[    0.040328] evm: security.SMACK64MMAP
[    0.040329] evm: security.apparmor
[    0.040329] evm: security.ima
[    0.040330] evm: security.capability
[    0.040341] PM: Registering ACPI NVS region [mem 0xdf7d0000-0xdf7d2fff] (12288 bytes)
[    0.040341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040341] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040341] pinctrl core: initialized pinctrl subsystem
[    0.040341] RTC time: 16:45:02, date: 04/25/18
[    0.040341] NET: Registered protocol family 16
[    0.040341] audit: initializing netlink subsys (disabled)
[    0.040341] audit: type=2000 audit(1524674702.040:1): state=initialized audit_enabled=0 res=1
[    0.040341] cpuidle: using governor ladder
[    0.040341] cpuidle: using governor menu
[    0.040341] ACPI: bus type PCI registered
[    0.040341] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040341] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.040341] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.040341] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[    0.040341] PCI: Using configuration type 1 for base access
[    0.040341] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040917] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040917] ACPI: Added _OSI(Module Device)
[    0.040917] ACPI: Added _OSI(Processor Device)
[    0.040917] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040917] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041325] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041334] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041340] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041347] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041353] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041359] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041365] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041372] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.048804] ACPI: Interpreter enabled
[    0.048817] ACPI: (supports S0 S3 S4 S5)
[    0.048818] ACPI: Using IOAPIC for interrupt routing
[    0.048836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.048958] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.053073] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.053078] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.053081] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.053290] PCI host bridge to bus 0000:00
[    0.053292] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.053293] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.053294] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.053295] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.053296] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
[    0.053297] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.053304] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.053382] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.053409] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.053473] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[    0.053498] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.053585] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.053608] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.053675] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.053748] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.053768] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.053846] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.053917] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.053936] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.054003] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.054078] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.054150] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.054225] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.054303] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.054376] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.054447] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.054526] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.054546] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[    0.054624] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.054690] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.054799] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[    0.054962] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.054978] pci 0000:00:1f.2: reg 0x10: [io  0xff00-0xff07]
[    0.054984] pci 0000:00:1f.2: reg 0x14: [io  0xfe00-0xfe03]
[    0.054990] pci 0000:00:1f.2: reg 0x18: [io  0xfd00-0xfd07]
[    0.054997] pci 0000:00:1f.2: reg 0x1c: [io  0xfc00-0xfc03]
[    0.055003] pci 0000:00:1f.2: reg 0x20: [io  0xfb00-0xfb1f]
[    0.055009] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
[    0.055046] pci 0000:00:1f.2: PME# supported from D3hot
[    0.055108] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.055125] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.055143] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.055245] pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
[    0.055259] pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
[    0.055267] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.055275] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[    0.055280] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
[    0.055286] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.055291] pci 0000:01:00.0: enabling Extended Tags
[    0.055357] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.055368] pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
[    0.055399] pci 0000:01:00.1: enabling Extended Tags
[    0.064019] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.064024] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.064028] pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.064033] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.064096] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.064126] pci 0000:02:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[    0.064202] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.076018] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.076023] pci 0000:00:01.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.076081] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.076157] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.076191] pci 0000:04:00.0: reg 0x10: [io  0xde00-0xdeff]
[    0.076223] pci 0000:04:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[    0.076244] pci 0000:04:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[    0.076355] pci 0000:04:00.0: supports D1 D2
[    0.076356] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088027] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.088032] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.088042] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.088126] pci 0000:05:00.0: [1283:8892] type 01 class 0x060400
[    0.088289] pci 0000:05:00.0: supports D1 D2
[    0.088290] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088339] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.088349] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[    0.088497] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.088589] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.088597] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088598] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088599] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088600] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.088602] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode)
[    0.089061] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.089119] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.089175] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.089230] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.089285] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.089341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.089397] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.089452] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.089678] SCSI subsystem initialized
[    0.089687] libata version 3.00 loaded.
[    0.089687] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.089687] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.089687] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.089687] vgaarb: loaded
[    0.089687] ACPI: bus type USB registered
[    0.089687] usbcore: registered new interface driver usbfs
[    0.089687] usbcore: registered new interface driver hub
[    0.089687] usbcore: registered new device driver usb
[    0.089687] EDAC MC: Ver: 3.0.0
[    0.089687] PCI: Using ACPI for IRQ routing
[    0.089687] PCI: pci_cache_line_size set to 64 bytes
[    0.089687] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.089687] e820: reserve RAM buffer [mem 0xdf7d0000-0xdfffffff]
[    0.089687] e820: reserve RAM buffer [mem 0x11f800000-0x11fffffff]
[    0.089687] NetLabel: Initializing
[    0.089687] NetLabel:  domain hash size = 128
[    0.089687] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.089687] NetLabel:  unlabeled traffic allowed by default
[    0.089687] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.089687] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.093014] clocksource: Switched to clocksource hpet
[    0.100583] VFS: Disk quotas dquot_6.6.0
[    0.100598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.100674] AppArmor: AppArmor Filesystem Enabled
[    0.100694] pnp: PnP ACPI init
[    0.100858] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.100859] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.100860] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.100862] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.100863] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.100867] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100932] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.101058] pnp 00:02: [dma 2]
[    0.101080] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.101188] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.101237] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.101238] system 00:04: [io  0x04d2-0x04ff] has been reserved
[    0.101241] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101268] system 00:05: [io  0x1000-0x107f] has been reserved
[    0.101269] system 00:05: [io  0x1080-0x10ff] has been reserved
[    0.101271] system 00:05: [io  0x1100-0x117f] has been reserved
[    0.101272] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.101275] system 00:05: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.101458] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.101462] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.101497] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.101500] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101723] system 00:08: [mem 0x000d0a00-0x000d3fff] has been reserved
[    0.101725] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.101726] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.101727] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.101729] system 00:08: [mem 0xdf7d0000-0xdf7dffff] could not be reserved
[    0.101730] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.101731] system 00:08: [mem 0x00100000-0xdf7cffff] could not be reserved
[    0.101733] system 00:08: [mem 0xdf7e0000-0xdf7fffff] has been reserved
[    0.101734] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.101735] system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.101736] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.101738] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.101739] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.101740] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.101741] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[    0.101743] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
[    0.101744] system 00:08: [mem 0x40000000-0x400fffff] could not be reserved
[    0.101745] system 00:08: [mem 0xdf800000-0xdfffffff] could not be reserved
[    0.101748] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.101753] pnp: PnP ACPI: found 9 devices
[    0.107530] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.107547] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.107549] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.107550] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.107587] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.107590] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107592] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.107595] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
[    0.107596] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107598] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.107600] pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.107602] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.107604] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.107606] pci 0000:00:01.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.107609] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.107611] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.107615] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.107618] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107622] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.107624] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.107630] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.107635] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.107658] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[    0.107667] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.107677] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.107678] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.107679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107680] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.107681] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfebfffff window]
[    0.107682] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.107683] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.107684] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.107685] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.107687] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.107688] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.107689] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107690] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.107691] pci_bus 0000:04: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.107692] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.107693] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.107694] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107695] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.107697] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xfebfffff window]
[    0.107756] NET: Registered protocol family 2
[    0.107892] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.107939] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.107994] TCP: Hash tables configured (established 32768 bind 32768)
[    0.108026] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.108037] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.108072] NET: Registered protocol family 1
[    0.148169] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.148306] PCI: CLS 4 bytes, default 64
[    0.148339] Unpacking initramfs...
[    0.752298] Freeing initrd memory: 52508K
[    0.752324] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.752326] software IO TLB [mem 0xdb7d0000-0xdf7d0000] (64MB) mapped at [00000000b6a68f71-000000006ea3716a]
[    0.752529] Scanning for low memory corruption every 60 seconds
[    0.753046] Initialise system trusted keyrings
[    0.753054] Key type blacklist registered
[    0.753079] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.753894] zbud: loaded
[    0.754229] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.754319] fuse init (API version 7.26)
[    0.755229] Key type asymmetric registered
[    0.755230] Asymmetric key parser 'x509' registered
[    0.755250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.755274] io scheduler noop registered
[    0.755275] io scheduler deadline registered
[    0.755304] io scheduler cfq registered (default)
[    0.755559] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.755894] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.755895] vesafb: scrolling: redraw
[    0.755896] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.755902] vesafb: framebuffer at 0xef000000, mapped to 0x00000000308ef8de, using 1216k, total 1216k
[    0.755966] Console: switching to colour frame buffer device 80x30
[    0.755974] fb0: VESA VGA frame buffer device
[    0.755983] intel_idle: MWAIT substates: 0x1120
[    0.755984] intel_idle: v0.4.1 model 0x2A
[    0.756085] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.756134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.756142] ACPI: Power Button [PWRB]
[    0.756171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.756190] ACPI: Power Button [PWRF]
[    0.756874] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.758365] Linux agpgart interface v0.103
[    0.759537] loop: module loaded
[    0.759647] libphy: Fixed MDIO Bus: probed
[    0.759648] tun: Universal TUN/TAP device driver, 1.6
[    0.759671] PPP generic driver version 2.4.2
[    0.759698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.759700] ehci-pci: EHCI PCI platform driver
[    0.759780] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.759784] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.759794] ehci-pci 0000:00:1a.0: debug port 2
[    0.763687] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.763695] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.776057] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.776117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.776120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.776123] usb usb1: Product: EHCI Host Controller
[    0.776125] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.776127] usb usb1: SerialNumber: 0000:00:1a.0
[    0.776292] hub 1-0:1.0: USB hub found
[    0.776298] hub 1-0:1.0: 2 ports detected
[    0.776450] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.776453] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.776462] ehci-pci 0000:00:1d.0: debug port 2
[    0.780351] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.780359] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.796064] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.796127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796132] usb usb2: Product: EHCI Host Controller
[    0.796134] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.796136] usb usb2: SerialNumber: 0000:00:1d.0
[    0.796299] hub 2-0:1.0: USB hub found
[    0.796304] hub 2-0:1.0: 2 ports detected
[    0.796381] ehci-platform: EHCI generic platform driver
[    0.796389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.796391] ohci-pci: OHCI PCI platform driver
[    0.796397] ohci-platform: OHCI generic platform driver
[    0.796400] uhci_hcd: USB Universal Host Controller Interface driver
[    0.796460] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.796462] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.796562] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    0.796691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796694] usb usb3: Product: xHCI Host Controller
[    0.796695] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.796695] usb usb3: SerialNumber: 0000:02:00.0
[    0.796827] hub 3-0:1.0: USB hub found
[    0.796834] hub 3-0:1.0: 2 ports detected
[    0.796893] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.796897] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    0.800025] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.800044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.800045] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.800046] usb usb4: Product: xHCI Host Controller
[    0.800047] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.800048] usb usb4: SerialNumber: 0000:02:00.0
[    0.800174] hub 4-0:1.0: USB hub found
[    0.800181] hub 4-0:1.0: 2 ports detected
[    0.800266] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.800267] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.800390] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.800564] mousedev: PS/2 mouse device common for all mice
[    0.800771] rtc_cmos 00:01: RTC can wake from S4
[    0.800904] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.800928] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.800932] i2c /dev entries driver
[    0.800962] device-mapper: uevent: version 1.0.3
[    0.801021] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.801025] intel_pstate: Intel P-state driver initializing
[    0.801215] ledtrig-cpu: registered to indicate activity on CPUs
[    0.801671] NET: Registered protocol family 10
[    0.804876] Segment Routing with IPv6
[    0.804888] NET: Registered protocol family 17
[    0.804960] Key type dns_resolver registered
[    0.805241] RAS: Correctable Errors collector initialized.
[    0.805258] microcode: sig=0x206a7, pf=0x2, revision=0x14
[    0.805341] microcode: Microcode Update Driver: v2.2.
[    0.805347] sched_clock: Marking stable (805338267, 0)->(785684214, 19654053)
[    0.805485] registered taskstats version 1
[    0.805491] Loading compiled-in X.509 certificates
[    0.807368] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[    0.807382] zswap: loaded using pool lzo/zbud
[    0.809823] Key type big_key registered
[    0.809827] Key type trusted registered
[    0.810985] Key type encrypted registered
[    0.810986] AppArmor: AppArmor sha1 policy hashing enabled
[    0.810988] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.811002] evm: HMAC attrs: 0x1
[    0.811214]   Magic number: 14:798:793
[    0.811287] rtc_cmos 00:01: setting system clock to 2018-04-25 16:45:03 UTC (1524674703)
[    0.811356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.811357] EDD information not available.
[    0.813789] Freeing unused kernel memory: 2404K
[    0.813790] Write protecting the kernel read-only data: 20480k
[    0.814251] Freeing unused kernel memory: 2008K
[    0.817398] Freeing unused kernel memory: 1904K
[    0.822534] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.822535] x86/mm: Checking user space page tables
[    0.827526] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.829992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.872801] Floppy drive(s): fd0 is unknown type 13 (usb?)
[    0.878978] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.878986] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.879341] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0x000000007a1cc948, 1c:6f:65:d7:53:ac, XID 0c200000 IRQ 29
[    0.879343] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.879995] ahci 0000:00:1f.2: version 3.0
[    0.880118] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.890419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.890422] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
[    0.894905] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    0.895834] FDC 0 is a post-1991 82077
[    0.939342] checking generic (ef000000 130000) vs hw (e0000000 8000000)
[    0.939343] checking generic (ef000000 130000) vs hw (ee000000 2000000)
[    0.939344] fb: switching to nouveaufb from VESA VGA
[    0.939362] Console: switching to colour dummy device 80x25
[    0.939471] nouveau 0000:01:00.0: NVIDIA GF108 (0c1080a1)
[    0.961525] scsi host0: ahci
[    0.961834] scsi host1: ahci
[    0.964034] scsi host2: ahci
[    0.964196] scsi host3: ahci
[    0.964301] scsi host4: ahci
[    0.964409] scsi host5: ahci
[    0.964443] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 30
[    0.964450] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 30
[    0.964458] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 30
[    0.964466] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 30
[    0.964474] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 30
[    0.964483] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 30
[    1.066996] nouveau 0000:01:00.0: bios: version 70.08.29.00.01
[    1.067874] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[    1.116006] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.132013] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.272409] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.272410] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.273030] hub 1-1:1.0: USB hub found
[    1.273089] hub 1-1:1.0: 6 ports detected
[    1.278550] ata1: SATA link down (SStatus 0 SControl 300)
[    1.288412] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.288414] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.288701] hub 2-1:1.0: USB hub found
[    1.288876] hub 2-1:1.0: 8 ports detected
[    1.559987] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.575992] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.590554] ata2: SATA link down (SStatus 0 SControl 300)
[    1.673979] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03e
[    1.673980] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.673981] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.673982] usb 1-1.2: Manufacturer: Logitech
[    1.677539] hidraw: raw HID events driver (C) Jiri Kosina
[    1.681449] usbcore: registered new interface driver usbhid
[    1.681450] usbhid: USB HID core driver
[    1.683248] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C03E.0001/input/input3
[    1.683365] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.684599] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
[    1.684601] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.684602] usb 2-1.3: Product: USB 2.0 Hub
[    1.684720] hub 2-1.3:1.0: USB hub found
[    1.684818] hub 2-1.3:1.0: 4 ports detected
[    1.759979] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[    1.759984] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[    1.763971] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.060002] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.062680] ata3.00: ATA-8: WDC WD1001FAES-00W7A0, 05.01D05, max UDMA/133
[    2.062682] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.064883] ata3.00: configured for UDMA/133
[    2.065168] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1001FAES-0 1D05 PQ: 0 ANSI: 5
[    2.065467] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.065640] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.065666] sd 2:0:0:0: [sda] Write Protect is off
[    2.065668] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.065744] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.096571]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
[    2.097495] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.372345] [TTM] Zone  kernel: Available graphics memory: 2011226 kiB
[    2.372345] [TTM] Initializing pool allocator
[    2.372348] [TTM] Initializing DMA pool allocator
[    2.372364] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[    2.372365] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.372367] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.372368] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.372370] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    2.372371] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    2.372372] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020
[    2.372373] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
[    2.372375] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    2.372376] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    2.372377] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    2.373278] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.373279] [drm] Driver supports precise vblank timestamp query.
[    2.374201] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.478496] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 0000000086676fdc
[    2.480158] fbcon: nouveaufb (fb0) is primary device
[    2.480207] Console: switching to colour frame buffer device 240x67
[    2.480229] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.540001] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.554967] ata4.00: ATAPI: PIONEER DVD-RW  DVR-219L, 1.01, max UDMA/100
[    2.563981] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.567540] ata4.00: configured for UDMA/100
[    2.575077] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-219L 1.01 PQ: 0 ANSI: 5
[    2.711328] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.711330] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.711546] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.711612] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.784232] clocksource: Switched to clocksource tsc
[    3.188019] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.190245] ata5.00: ATA-8: WDC WD1001FAES-00W7A0, 05.01D05, max UDMA/133
[    3.190248] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.192934] ata5.00: configured for UDMA/133
[    3.193217] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1001FAES-0 1D05 PQ: 0 ANSI: 5
[    3.193521] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.193750] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.193803] sd 4:0:0:0: [sdb] Write Protect is off
[    3.193812] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.193911] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.203245]  sdb: sdb1
[    3.203657] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.506390] ata6: SATA link down (SStatus 0 SControl 300)
[    4.946740] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[    4.950623] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    6.125785] random: crng init done
[    6.300651] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.358336] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.376117] systemd[1]: Detected architecture x86-64.
[    6.384938] systemd[1]: Set hostname to <PC4>.
[    6.960014] usb 2-1.4: device descriptor read/64, error -110
[    9.168332] systemd[1]: Reached target User and Group Name Lookups.
[    9.168388] systemd[1]: Reached target Remote File Systems.
[    9.168513] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.168636] systemd[1]: Created slice User and Session Slice.
[    9.168669] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.168758] systemd[1]: Created slice System Slice.
[    9.168799] systemd[1]: Listening on udev Kernel Socket.
[    9.648808] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    9.787775] lp: driver loaded but no devices found
[    9.822090] ppdev: user-space parallel port driver
[    9.861418] systemd-journald[283]: Received request to flush runtime journal from PID 1
[   22.575987] usb 2-1.4: device descriptor read/64, error -110
[   22.763986] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[   23.274394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.338713] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   23.338715] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   23.338715] RAPL PMU: hw unit of domain package 2^-16 Joules
[   23.338716] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   23.349055] AVX version of gcm_enc/dec engaged.
[   23.349056] AES CTR mode by8 optimization enabled
[   23.377572] snd_hda_intel 0000:01:00.1: Disabling MSI
[   23.377576] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   23.397720] intel_rapl: Found RAPL domain package
[   23.397721] intel_rapl: Found RAPL domain core
[   23.574816] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   23.574818] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.574819] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   23.574820] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   23.574821] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
[   23.574822] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   23.574824] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   23.574825] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   23.574826] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   23.574827] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   23.588437] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   23.588474] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   23.588504] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   23.588535] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   23.588565] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   23.588596] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   23.588626] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   23.609605] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247)
[   23.609609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.609629] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.095105] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   24.656326] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   24.656362] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   24.656396] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   24.656429] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   27.397085] Adding 4095996k swap on /dev/sda7.  Priority:-2 extents:1 across:4095996k FS
[   27.876256] audit: type=1400 audit(1524674730.560:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=719 comm="apparmor_parser"
[   27.876260] audit: type=1400 audit(1524674730.560:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[   27.876261] audit: type=1400 audit(1524674730.560:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=719 comm="apparmor_parser"
[   27.876263] audit: type=1400 audit(1524674730.560:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[   27.877260] audit: type=1400 audit(1524674730.560:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=724 comm="apparmor_parser"
[   27.877300] audit: type=1400 audit(1524674730.560:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=723 comm="apparmor_parser"
[   27.877302] audit: type=1400 audit(1524674730.560:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=723 comm="apparmor_parser"
[   27.877303] audit: type=1400 audit(1524674730.560:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=723 comm="apparmor_parser"
[   27.880673] audit: type=1400 audit(1524674730.564:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=726 comm="apparmor_parser"
[   27.880676] audit: type=1400 audit(1524674730.564:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=726 comm="apparmor_parser"
[   27.951972] usb 2-1.4: device descriptor read/64, error -110
[   32.554881] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   32.739794] r8169 0000:04:00.0 enp4s0: link down
[   32.739797] r8169 0000:04:00.0 enp4s0: link down
[   32.739861] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   34.617767] r8169 0000:04:00.0 enp4s0: link up
[   34.617786] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   43.567988] usb 2-1.4: device descriptor read/64, error -110
[   43.676097] usb 2-1-port4: attempt power cycle
[   44.279988] usb 2-1.4: new high-speed USB device number 6 using ehci-pci
[   54.960012] usb 2-1.4: device not accepting address 6, error -110
[   55.040015] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[   59.634107] rfkill: input handler disabled
[   65.598085] usb 2-1.4: device not accepting address 7, error -110
[   65.598244] usb 2-1-port4: unable to enumerate USB device
[   65.681119] usb 2-1.8: new high-speed USB device number 8 using ehci-pci
[   66.045480] usb 2-1.8: New USB device found, idVendor=046d, idProduct=081d
[   66.045484] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[   66.045487] usb 2-1.8: SerialNumber: 6C9617C0
[   66.061630] media: Linux media interface: v0.10
[   66.066257] Linux video capture interface: v2.00
[   66.306539] usb 2-1.8: set resolution quirk: cval->res = 384
[   66.307133] usbcore: registered new interface driver snd-usb-audio
[   66.307252] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[   66.319944] uvcvideo 2-1.8:1.2: Entity type for entity Extension 4 was not initialized!
[   66.319948] uvcvideo 2-1.8:1.2: Entity type for entity Processing 2 was not initialized!
[   66.319950] uvcvideo 2-1.8:1.2: Entity type for entity Camera 1 was not initialized!
[   66.319952] uvcvideo 2-1.8:1.2: Entity type for entity Extension 5 was not initialized!
[   66.319955] uvcvideo 2-1.8:1.2: Entity type for entity Extension 6 was not initialized!
[   66.319957] uvcvideo 2-1.8:1.2: Entity type for entity Extension 7 was not initialized!
[   66.319959] uvcvideo 2-1.8:1.2: Entity type for entity Extension 8 was not initialized!
[   66.320106] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/input/input15
[   66.320254] usbcore: registered new interface driver uvcvideo
[   66.320255] USB Video Class driver (1.1.1)
[  253.923965] usb 2-1.4: new high-speed USB device number 9 using ehci-pci
[  259.155698] usb 2-1.4: device descriptor read/64, error -110
[  274.770869] usb 2-1.4: device descriptor read/64, error -110
[  274.958826] usb 2-1.4: new high-speed USB device number 10 using ehci-pci
[  280.146543] usb 2-1.4: device descriptor read/64, error -110
[  295.763124] usb 2-1.4: device descriptor read/64, error -110
[  295.871265] usb 2-1-port4: attempt power cycle
[  295.951131] usb 2-1.8: reset high-speed USB device number 8 using ehci-pci
[  296.475152] usb 2-1.4: new high-speed USB device number 11 using ehci-pci
[  307.155524] usb 2-1.4: device not accepting address 11, error -110
[  307.235540] usb 2-1.4: new high-speed USB device number 12 using ehci-pci
[  317.907809] usb 2-1.4: device not accepting address 12, error -110
[  317.907984] usb 2-1-port4: unable to enumerate USB device
[ 1099.442769] print_req_error: I/O error, dev fd0, sector 0
[ 1099.442776] floppy: error 10 while reading block 0
[ 1100.545521] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1100.603214] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1100.645018] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 1100.703695] QNX4 filesystem 0.2.3 registered.
[ 1100.791137] raid6: sse2x1   gen()  8973 MB/s
[ 1100.839143] raid6: sse2x1   xor()  7026 MB/s
[ 1100.887146] raid6: sse2x2   gen() 11999 MB/s
[ 1100.935151] raid6: sse2x2   xor()  8102 MB/s
[ 1100.983153] raid6: sse2x4   gen() 14178 MB/s
[ 1101.031156] raid6: sse2x4   xor()  9527 MB/s
[ 1101.031158] raid6: using algorithm sse2x4 gen() 14178 MB/s
[ 1101.031158] raid6: .... xor() 9527 MB/s, rmw enabled
[ 1101.031159] raid6: using ssse3x2 recovery algorithm
[ 1101.042530] xor: automatically using best checksumming function   avx       
[ 1101.112693] Btrfs loaded, crc32c=crc32c-intel
[ 1128.741280] print_req_error: I/O error, dev fd0, sector 0
[ 1128.741287] floppy: error 10 while reading block 0
[ 1152.462890] print_req_error: I/O error, dev fd0, sector 0
[ 1152.462897] floppy: error 10 while reading block 0
[ 1175.264513] print_req_error: I/O error, dev fd0, sector 0
[ 1175.264519] floppy: error 10 while reading block 0
[ 1176.893730] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 1176.950406] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1177.045684] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
[ 1177.085909] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1202.417963] print_req_error: I/O error, dev fd0, sector 0
[ 1202.417969] floppy: error 10 while reading block 0
[ 1225.230589] print_req_error: I/O error, dev fd0, sector 0
[ 1225.230596] floppy: error 10 while reading block 0
[ 1444.498538] print_req_error: I/O error, dev fd0, sector 0
[ 1444.498545] floppy: error 10 while reading block 0
[ 1467.606851] print_req_error: I/O error, dev fd0, sector 0
[ 1467.606858] floppy: error 10 while reading block 0
[ 1469.319470] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 1469.338828] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1470.345842] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
[ 1470.354167] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1494.234774] print_req_error: I/O error, dev fd0, sector 0
[ 1494.234779] floppy: error 10 while reading block 0
[ 1497.849249] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 1497.873916] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1498.000989] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
[ 1498.033220] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5928.053980] print_req_error: I/O error, dev fd0, sector 0
[ 5928.053987] floppy: error 10 while reading block 0 
gerard@PC4:~$

Dernière modification par winux (Le 25/04/2018, à 21:28)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#8 Le 25/04/2018, à 23:16

ylag

Re : Ub18.04 très lent après le login

Salut,

Extrait du retour de dmesg au #7 relatif au USB:

[    0.089687] usbcore: registered new interface driver usbfs
[    0.089687] usbcore: registered new interface driver hub
[    0.089687] usbcore: registered new device driver usb
[    0.759698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.759784] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.776057] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.776117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.776120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.776123] usb usb1: Product: EHCI Host Controller
[    0.776125] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.776127] usb usb1: SerialNumber: 0000:00:1a.0
[    0.776292] hub 1-0:1.0: USB hub found
[    0.776453] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.796064] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.796127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796132] usb usb2: Product: EHCI Host Controller
[    0.796134] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.796136] usb usb2: SerialNumber: 0000:00:1d.0
[    0.796299] hub 2-0:1.0: USB hub found
[    0.796389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.796400] uhci_hcd: USB Universal Host Controller Interface driver
[    0.796462] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.796691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796694] usb usb3: Product: xHCI Host Controller
[    0.796695] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.796695] usb usb3: SerialNumber: 0000:02:00.0
[    0.796827] hub 3-0:1.0: USB hub found
[    0.796897] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    0.800025] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.800044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.800045] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.800046] usb usb4: Product: xHCI Host Controller
[    0.800047] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.800048] usb usb4: SerialNumber: 0000:02:00.0
[    0.800174] hub 4-0:1.0: USB hub found
[    0.872801] Floppy drive(s): fd0 is unknown type 13 (usb?)
[    1.116006] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.132013] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.272409] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.272410] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.273030] hub 1-1:1.0: USB hub found
[    1.288412] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.288414] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.288701] hub 2-1:1.0: USB hub found
[    1.559987] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.575992] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.673979] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03e
[    1.673980] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.673981] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.673982] usb 1-1.2: Manufacturer: Logitech
[    1.681449] usbcore: registered new interface driver usbhid
[    1.681450] usbhid: USB HID core driver
[    1.683248] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C03E.0001/input/input3
[    1.683365] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.684599] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
[    1.684601] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.684602] usb 2-1.3: Product: USB 2.0 Hub
[    1.684720] hub 2-1.3:1.0: USB hub found
[    1.763971] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    6.960014] usb 2-1.4: device descriptor read/64, error -110
[   22.575987] usb 2-1.4: device descriptor read/64, error -110
[   22.763986] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[   27.951972] usb 2-1.4: device descriptor read/64, error -110
[   43.567988] usb 2-1.4: device descriptor read/64, error -110
[   43.676097] usb 2-1-port4: attempt power cycle
[   44.279988] usb 2-1.4: new high-speed USB device number 6 using ehci-pci
[   54.960012] usb 2-1.4: device not accepting address 6, error -110
[   55.040015] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[   65.598085] usb 2-1.4: device not accepting address 7, error -110
[   65.598244] usb 2-1-port4: unable to enumerate USB device
[   65.681119] usb 2-1.8: new high-speed USB device number 8 using ehci-pci
[   66.045480] usb 2-1.8: New USB device found, idVendor=046d, idProduct=081d
[   66.045484] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[   66.045487] usb 2-1.8: SerialNumber: 6C9617C0
[   66.306539] usb 2-1.8: set resolution quirk: cval->res = 384
[   66.307133] usbcore: registered new interface driver snd-usb-audio
[   66.320106] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/input/input15
[   66.320254] usbcore: registered new interface driver uvcvideo
[   66.320255] USB Video Class driver (1.1.1)
[  253.923965] usb 2-1.4: new high-speed USB device number 9 using ehci-pci
[  259.155698] usb 2-1.4: device descriptor read/64, error -110
[  274.770869] usb 2-1.4: device descriptor read/64, error -110
[  274.958826] usb 2-1.4: new high-speed USB device number 10 using ehci-pci
[  280.146543] usb 2-1.4: device descriptor read/64, error -110
[  295.763124] usb 2-1.4: device descriptor read/64, error -110
[  295.871265] usb 2-1-port4: attempt power cycle
[  295.951131] usb 2-1.8: reset high-speed USB device number 8 using ehci-pci
[  296.475152] usb 2-1.4: new high-speed USB device number 11 using ehci-pci
[  307.155524] usb 2-1.4: device not accepting address 11, error -110
[  307.235540] usb 2-1.4: new high-speed USB device number 12 using ehci-pci
[  317.907809] usb 2-1.4: device not accepting address 12, error -110
[  317.907984] usb 2-1-port4: unable to enumerate USB device

Certains périphériques USB semblent générer des erreurs au démarrage ?
Peut-être tenter de redémarrer avec un maximum de ces périphériques débranchés ?

A+

Hors ligne

#9 Le 26/04/2018, à 00:56

GammaDraconis

Re : Ub18.04 très lent après le login

Pourquoi tu as formaté tes partitions en "ext3" et pas en "ext4" sachant que l'ext4 est une amélioration de l'ext3 notamment en terme de d'optimisation d'espace contre la fragmentation ?

Cela dit, malgré cette erreur, ça n'a rien à voir avec ton problème, même avec l'ext3 tu ne dois pas avoir de soucis de lenteur. Tes partitions sont chiffrés ?

Dernière modification par GammaDraconis (Le 26/04/2018, à 00:56)

Hors ligne

#10 Le 26/04/2018, à 06:45

winux

Re : Ub18.04 très lent après le login

GammaDraconis a écrit :

Pourquoi tu as formaté tes partitions en "ext3"

Bonjour
Comme je l'expliquais en #5 j'utilise EXT3 pour pouvoir sauvegarder avec Partimage qui n'accepte pas EXT4 (dommage) car je trouve Clonezilla beaucoup moins convivial

GammaDraconis a écrit :

Cela dit, malgré cette erreur, ça n'a rien à voir avec ton problème, même avec l'ext3 tu ne dois pas avoir de soucis de lenteur. Tes partitions sont chiffrés ?

- Non ce n'est pas une erreur, c'est volontaire smile
- Oui je suis d'accord que ça n'a rien à voir d'autant que ça marchait très bien avant la mise à jour n-1 ou n-2 (je ne sais plus laquelle m'a plombé)
- Non mes partitions ne sont pas chiffrées


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#11 Le 26/04/2018, à 07:05

winux

Re : Ub18.04 très lent après le login

Good news
Depuis la mise à jour de ce matin qui touchait notammait le noyau Linux tout est rentré dans l'ordre
Il faut désormais 8 secondes après le login pour avoir le bureau affiché

ylag bien noté ton retour, j'avais aussi remarqué que USB générait erreur 110
Merci à tous 3 pour vos réponses et votre aide.

Je pense que c'était une sorte de bug qui vient d'être corrigé le jour du lancement officiel de la 18.04.
Bien joué les développeurs
Bonne journée

Dernière modification par winux (Le 26/04/2018, à 07:07)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#12 Le 26/04/2018, à 07:23

malbo

Re : Ub18.04 très lent après le login

C'est une bonne nouvelle !
A présent que tout semble rentré dans l'ordre, pourrais-tu repasser la commande dmesg et coller le résultat dans ta réponse afin qu'on puisse comparer avec le post #7 ?

Dernière modification par malbo (Le 26/04/2018, à 07:23)

Hors ligne

#13 Le 26/04/2018, à 10:22

winux

Re : Ub18.04 très lent après le login

Bonjour
Oui malbo c'est du bon, j'ai lancé la commande dmesg
J'y vois toujours des erreurs sur usb 2-1.4
mais ne comprends pas trop ce que ça veut dire ? c'est grave docteur ou je passe outre ?

usb 2-1.4: device descriptor read/64, error -110

voici le nouveau résultat de la commande.

 gerard@PC4:~$ dmesg
[    0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7cffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df7d0000-0x00000000df7d2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7d3000-0x00000000df7dffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P67A-UD3-B3/P67A-UD3-B3, BIOS F2 02/22/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4096M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf7d0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5a20-0x000f5a2f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0xb0b3e000, 0xb0b3efff] PGTABLE
[    0.000000] BRK [0xb0b3f000, 0xb0b3ffff] PGTABLE
[    0.000000] BRK [0xb0b40000, 0xb0b40fff] PGTABLE
[    0.000000] BRK [0xb0b41000, 0xb0b41fff] PGTABLE
[    0.000000] BRK [0xb0b42000, 0xb0b42fff] PGTABLE
[    0.000000] BRK [0xb0b43000, 0xb0b43fff] PGTABLE
[    0.000000] BRK [0xb0b44000, 0xb0b44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31961000-0x34ca7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7180 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000DF7D3040 00004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000DF7D3100 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000DF7D31C0 00469B (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.000000] ACPI: FACS 0x00000000DF7D0000 000040
[    0.000000] ACPI: HPET 0x00000000DF7D79C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000DF7D7A40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: ASPT 0x00000000DF7D7B00 000034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.000000] ACPI: SSPT 0x00000000DF7D7B40 00239C (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.000000] ACPI: EUDS 0x00000000DF7D9EE0 0000C0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: MATS 0x00000000DF7D9FA0 000034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 0x00000000DF7DA000 000A3A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000DF7D78C0 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000DF7DAA40 001F4C (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f7d3000-0x11f7fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df7cffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f7fffff]
[    0.000000] On node 0 totalpages: 1044332
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14240 pages used for memmap
[    0.000000]   DMA32 zone: 911312 pages, LIFO batch:31
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7d0000-0xdf7d2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7d3000-0xdf7dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027991
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=5efe16f0-a893-4466-ad9d-ff6a19d63f03 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3963592K/4177328K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 213736K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3292.273 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.54 BogoMIPS (lpj=13169092)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028099] CPU: Physical Processor ID: 0
[    0.028099] CPU: Processor Core ID: 0
[    0.028104] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028104] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028107] mce: CPU supports 9 MCE banks
[    0.028113] CPU0: Thermal monitoring enabled (TM1)
[    0.028121] process: using mwait in idle threads
[    0.028123] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.028123] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028124] Spectre V2 : Mitigation: Full generic retpoline
[    0.028212] Freeing SMP alternatives memory: 36K
[    0.032055] TSC deadline timer enabled
[    0.032057] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032108] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032124] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.032126] ... version:                3
[    0.032127] ... bit width:              48
[    0.032127] ... generic registers:      8
[    0.032128] ... value mask:             0000ffffffffffff
[    0.032128] ... max period:             00007fffffffffff
[    0.032129] ... fixed-purpose events:   3
[    0.032129] ... event mask:             00000007000000ff
[    0.032157] Hierarchical SRCU implementation.
[    0.032968] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032980] smp: Bringing up secondary CPUs ...
[    0.033036] x86: Booting SMP configuration:
[    0.033037] .... node  #0, CPUs:      #1 #2 #3
[    0.038325] smp: Brought up 1 node, 4 CPUs
[    0.038325] smpboot: Max logical packages: 2
[    0.038325] smpboot: Total of 4 processors activated (26338.18 BogoMIPS)
[    0.040159] devtmpfs: initialized
[    0.040159] x86/mm: Memory block size: 128MB
[    0.040327] evm: security.selinux
[    0.040327] evm: security.SMACK64
[    0.040328] evm: security.SMACK64EXEC
[    0.040328] evm: security.SMACK64TRANSMUTE
[    0.040329] evm: security.SMACK64MMAP
[    0.040329] evm: security.apparmor
[    0.040329] evm: security.ima
[    0.040330] evm: security.capability
[    0.040341] PM: Registering ACPI NVS region [mem 0xdf7d0000-0xdf7d2fff] (12288 bytes)
[    0.040341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040341] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040341] pinctrl core: initialized pinctrl subsystem
[    0.040341] RTC time:  4:53:35, date: 04/26/18
[    0.040341] NET: Registered protocol family 16
[    0.040341] audit: initializing netlink subsys (disabled)
[    0.040341] audit: type=2000 audit(1524718415.040:1): state=initialized audit_enabled=0 res=1
[    0.040341] cpuidle: using governor ladder
[    0.040341] cpuidle: using governor menu
[    0.040341] ACPI: bus type PCI registered
[    0.040341] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040341] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.040341] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.040341] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[    0.040341] PCI: Using configuration type 1 for base access
[    0.040341] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040918] ACPI: Added _OSI(Module Device)
[    0.040918] ACPI: Added _OSI(Processor Device)
[    0.040918] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040918] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041325] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041334] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041340] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041347] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041353] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041359] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041365] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.041373] ACPI Exception: Could not find/resolve named package element: \_SB_.PCI0.LNK9 (20170831/dspkginit-381)
[    0.048802] ACPI: Interpreter enabled
[    0.048816] ACPI: (supports S0 S3 S4 S5)
[    0.048817] ACPI: Using IOAPIC for interrupt routing
[    0.048835] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.048957] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.053076] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.053080] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.053084] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.053293] PCI host bridge to bus 0000:00
[    0.053295] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.053296] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.053297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.053298] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.053299] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
[    0.053300] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.053307] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.053384] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.053412] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.053476] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[    0.053501] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.053588] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.053611] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.053678] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.053751] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.053771] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.053849] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.053920] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.053939] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.054007] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.054081] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.054153] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.054228] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.054306] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.054379] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.054451] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.054529] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.054549] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[    0.054627] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.054693] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.054802] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[    0.054965] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.054981] pci 0000:00:1f.2: reg 0x10: [io  0xff00-0xff07]
[    0.054987] pci 0000:00:1f.2: reg 0x14: [io  0xfe00-0xfe03]
[    0.054994] pci 0000:00:1f.2: reg 0x18: [io  0xfd00-0xfd07]
[    0.055000] pci 0000:00:1f.2: reg 0x1c: [io  0xfc00-0xfc03]
[    0.055006] pci 0000:00:1f.2: reg 0x20: [io  0xfb00-0xfb1f]
[    0.055013] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
[    0.055049] pci 0000:00:1f.2: PME# supported from D3hot
[    0.055112] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.055129] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.055147] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.055249] pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
[    0.055263] pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
[    0.055271] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.055279] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[    0.055284] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
[    0.055290] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.055295] pci 0000:01:00.0: enabling Extended Tags
[    0.055360] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.055372] pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
[    0.055403] pci 0000:01:00.1: enabling Extended Tags
[    0.064022] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.064026] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.064029] pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.064033] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.064088] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[    0.064120] pci 0000:02:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[    0.064194] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.076016] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.076021] pci 0000:00:01.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.076077] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.076152] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.076185] pci 0000:04:00.0: reg 0x10: [io  0xde00-0xdeff]
[    0.076217] pci 0000:04:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[    0.076238] pci 0000:04:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[    0.076347] pci 0000:04:00.0: supports D1 D2
[    0.076348] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088026] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.088030] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.088040] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.088123] pci 0000:05:00.0: [1283:8892] type 01 class 0x060400
[    0.088286] pci 0000:05:00.0: supports D1 D2
[    0.088287] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088335] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.088345] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[    0.088492] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.088585] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.088592] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088593] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088594] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088595] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.088596] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode)
[    0.089042] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.089099] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.089155] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.089210] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.089265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.089321] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.089376] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.089431] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.089661] SCSI subsystem initialized
[    0.089669] libata version 3.00 loaded.
[    0.089669] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.089669] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.089669] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.089669] vgaarb: loaded
[    0.089669] ACPI: bus type USB registered
[    0.089669] usbcore: registered new interface driver usbfs
[    0.089669] usbcore: registered new interface driver hub
[    0.089669] usbcore: registered new device driver usb
[    0.089669] EDAC MC: Ver: 3.0.0
[    0.089669] PCI: Using ACPI for IRQ routing
[    0.089669] PCI: pci_cache_line_size set to 64 bytes
[    0.089669] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.089669] e820: reserve RAM buffer [mem 0xdf7d0000-0xdfffffff]
[    0.089669] e820: reserve RAM buffer [mem 0x11f800000-0x11fffffff]
[    0.089669] NetLabel: Initializing
[    0.089669] NetLabel:  domain hash size = 128
[    0.089669] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.089669] NetLabel:  unlabeled traffic allowed by default
[    0.089669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.089669] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.093014] clocksource: Switched to clocksource hpet
[    0.100138] VFS: Disk quotas dquot_6.6.0
[    0.100153] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.100228] AppArmor: AppArmor Filesystem Enabled
[    0.100249] pnp: PnP ACPI init
[    0.100416] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.100418] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.100419] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.100420] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.100422] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.100426] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100495] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.100625] pnp 00:02: [dma 2]
[    0.100647] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.100755] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.100802] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.100803] system 00:04: [io  0x04d2-0x04ff] has been reserved
[    0.100807] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100835] system 00:05: [io  0x1000-0x107f] has been reserved
[    0.100836] system 00:05: [io  0x1080-0x10ff] has been reserved
[    0.100837] system 00:05: [io  0x1100-0x117f] has been reserved
[    0.100838] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.100841] system 00:05: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.101023] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.101026] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.101061] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.101064] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101288] system 00:08: [mem 0x000d0a00-0x000d3fff] has been reserved
[    0.101290] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.101291] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.101292] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.101294] system 00:08: [mem 0xdf7d0000-0xdf7dffff] could not be reserved
[    0.101295] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.101296] system 00:08: [mem 0x00100000-0xdf7cffff] could not be reserved
[    0.101298] system 00:08: [mem 0xdf7e0000-0xdf7fffff] has been reserved
[    0.101300] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.101301] system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.101303] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.101304] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.101305] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.101306] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.101308] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[    0.101309] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
[    0.101310] system 00:08: [mem 0x40000000-0x400fffff] could not be reserved
[    0.101311] system 00:08: [mem 0xdf800000-0xdfffffff] could not be reserved
[    0.101315] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.101320] pnp: PnP ACPI: found 9 devices
[    0.107098] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.107116] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.107117] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.107119] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.107156] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.107159] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107161] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.107163] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
[    0.107165] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107167] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.107169] pci 0000:00:01.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.107170] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.107173] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.107175] pci 0000:00:01.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.107178] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.107180] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.107183] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.107186] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107191] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.107193] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.107199] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.107204] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.107226] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[    0.107236] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.107245] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.107247] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.107248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107249] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.107250] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfebfffff window]
[    0.107251] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.107252] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.107253] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.107254] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.107255] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.107256] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.107257] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.107259] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.107260] pci_bus 0000:04: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.107261] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.107262] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.107263] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107264] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.107265] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xfebfffff window]
[    0.107326] NET: Registered protocol family 2
[    0.107462] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.107510] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.107564] TCP: Hash tables configured (established 32768 bind 32768)
[    0.107587] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.107599] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.107633] NET: Registered protocol family 1
[    0.148164] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.148300] PCI: CLS 4 bytes, default 64
[    0.148333] Unpacking initramfs...
[    0.752164] Freeing initrd memory: 52508K
[    0.752189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.752192] software IO TLB [mem 0xdb7d0000-0xdf7d0000] (64MB) mapped at [0000000087733fcd-000000009efc0b8e]
[    0.752396] Scanning for low memory corruption every 60 seconds
[    0.752915] Initialise system trusted keyrings
[    0.752922] Key type blacklist registered
[    0.752946] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.753759] zbud: loaded
[    0.754096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.754189] fuse init (API version 7.26)
[    0.755096] Key type asymmetric registered
[    0.755097] Asymmetric key parser 'x509' registered
[    0.755117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.755140] io scheduler noop registered
[    0.755141] io scheduler deadline registered
[    0.755171] io scheduler cfq registered (default)
[    0.755429] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.755765] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.755766] vesafb: scrolling: redraw
[    0.755767] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.755773] vesafb: framebuffer at 0xef000000, mapped to 0x00000000d9ced1aa, using 1216k, total 1216k
[    0.755837] Console: switching to colour frame buffer device 80x30
[    0.755845] fb0: VESA VGA frame buffer device
[    0.755855] intel_idle: MWAIT substates: 0x1120
[    0.755855] intel_idle: v0.4.1 model 0x2A
[    0.755947] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.755995] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.756010] ACPI: Power Button [PWRB]
[    0.756040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.756059] ACPI: Power Button [PWRF]
[    0.756746] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.758196] Linux agpgart interface v0.103
[    0.759307] loop: module loaded
[    0.759416] libphy: Fixed MDIO Bus: probed
[    0.759416] tun: Universal TUN/TAP device driver, 1.6
[    0.759440] PPP generic driver version 2.4.2
[    0.759467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.759469] ehci-pci: EHCI PCI platform driver
[    0.759548] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.759554] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.759564] ehci-pci 0000:00:1a.0: debug port 2
[    0.763461] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.763469] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.776055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.776115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.776118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.776121] usb usb1: Product: EHCI Host Controller
[    0.776123] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.776125] usb usb1: SerialNumber: 0000:00:1a.0
[    0.776291] hub 1-0:1.0: USB hub found
[    0.776296] hub 1-0:1.0: 2 ports detected
[    0.776448] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.776451] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.776460] ehci-pci 0000:00:1d.0: debug port 2
[    0.780366] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.780374] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.796062] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.796125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796131] usb usb2: Product: EHCI Host Controller
[    0.796133] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    0.796135] usb usb2: SerialNumber: 0000:00:1d.0
[    0.796299] hub 2-0:1.0: USB hub found
[    0.796304] hub 2-0:1.0: 2 ports detected
[    0.796382] ehci-platform: EHCI generic platform driver
[    0.796389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.796392] ohci-pci: OHCI PCI platform driver
[    0.796397] ohci-platform: OHCI generic platform driver
[    0.796400] uhci_hcd: USB Universal Host Controller Interface driver
[    0.796460] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.796463] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.796561] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    0.796689] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.796691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796692] usb usb3: Product: xHCI Host Controller
[    0.796692] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.796693] usb usb3: SerialNumber: 0000:02:00.0
[    0.796838] hub 3-0:1.0: USB hub found
[    0.796845] hub 3-0:1.0: 2 ports detected
[    0.796905] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.796907] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    0.800023] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.800042] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.800043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.800044] usb usb4: Product: xHCI Host Controller
[    0.800045] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[    0.800046] usb usb4: SerialNumber: 0000:02:00.0
[    0.800173] hub 4-0:1.0: USB hub found
[    0.800180] hub 4-0:1.0: 2 ports detected
[    0.800265] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.800265] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.800396] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.800601] mousedev: PS/2 mouse device common for all mice
[    0.800823] rtc_cmos 00:01: RTC can wake from S4
[    0.800954] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.800977] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.800982] i2c /dev entries driver
[    0.801011] device-mapper: uevent: version 1.0.3
[    0.801069] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.801073] intel_pstate: Intel P-state driver initializing
[    0.801273] ledtrig-cpu: registered to indicate activity on CPUs
[    0.801744] NET: Registered protocol family 10
[    0.805076] Segment Routing with IPv6
[    0.805090] NET: Registered protocol family 17
[    0.805164] Key type dns_resolver registered
[    0.805547] RAS: Correctable Errors collector initialized.
[    0.805565] microcode: sig=0x206a7, pf=0x2, revision=0x14
[    0.805649] microcode: Microcode Update Driver: v2.2.
[    0.805654] sched_clock: Marking stable (805646337, 0)->(788793632, 16852705)
[    0.805808] registered taskstats version 1
[    0.805814] Loading compiled-in X.509 certificates
[    0.807693] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[    0.807708] zswap: loaded using pool lzo/zbud
[    0.810185] Key type big_key registered
[    0.810189] Key type trusted registered
[    0.811343] Key type encrypted registered
[    0.811345] AppArmor: AppArmor sha1 policy hashing enabled
[    0.811347] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.811360] evm: HMAC attrs: 0x1
[    0.811568]   Magic number: 14:701:869
[    0.811656] rtc_cmos 00:01: setting system clock to 2018-04-26 04:53:35 UTC (1524718415)
[    0.811684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.811684] EDD information not available.
[    0.814114] Freeing unused kernel memory: 2404K
[    0.814115] Write protecting the kernel read-only data: 20480k
[    0.814561] Freeing unused kernel memory: 2008K
[    0.817709] Freeing unused kernel memory: 1904K
[    0.822793] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.822794] x86/mm: Checking user space page tables
[    0.827790] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.829197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.874146] Floppy drive(s): fd0 is unknown type 13 (usb?)
[    0.880198] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.880206] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.880574] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0x0000000041a74f39, 1c:6f:65:d7:53:ac, XID 0c200000 IRQ 29
[    0.880575] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.883250] ahci 0000:00:1f.2: version 3.0
[    0.883388] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.893543] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.893546] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
[    0.896115] FDC 0 is a post-1991 82077
[    0.896610] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    0.922021] checking generic (ef000000 130000) vs hw (e0000000 8000000)
[    0.922023] checking generic (ef000000 130000) vs hw (ee000000 2000000)
[    0.922023] fb: switching to nouveaufb from VESA VGA
[    0.922039] Console: switching to colour dummy device 80x25
[    0.922140] nouveau 0000:01:00.0: NVIDIA GF108 (0c1080a1)
[    0.952691] scsi host0: ahci
[    0.952929] scsi host1: ahci
[    0.953760] scsi host2: ahci
[    0.956057] scsi host3: ahci
[    0.956189] scsi host4: ahci
[    0.956390] scsi host5: ahci
[    0.956420] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 30
[    0.956428] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 30
[    0.956435] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 30
[    0.956443] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 30
[    0.956452] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 30
[    0.956459] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 30
[    1.049698] nouveau 0000:01:00.0: bios: version 70.08.29.00.01
[    1.051153] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[    1.120049] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.136062] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.270611] ata1: SATA link down (SStatus 0 SControl 300)
[    1.292496] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.292498] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.292802] hub 1-1:1.0: USB hub found
[    1.292958] hub 1-1:1.0: 6 ports detected
[    1.308457] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.308458] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.308752] hub 2-1:1.0: USB hub found
[    1.308956] hub 2-1:1.0: 8 ports detected
[    1.580075] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.582576] ata2: SATA link down (SStatus 0 SControl 300)
[    1.596094] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.693858] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03e
[    1.693859] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.693860] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.693861] usb 1-1.2: Manufacturer: Logitech
[    1.697410] hidraw: raw HID events driver (C) Jiri Kosina
[    1.701577] usbcore: registered new interface driver usbhid
[    1.701577] usbhid: USB HID core driver
[    1.703315] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C03E.0001/input/input3
[    1.703486] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.704695] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
[    1.704697] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.704698] usb 2-1.3: Product: USB 2.0 Hub
[    1.704838] hub 2-1.3:1.0: USB hub found
[    1.704945] hub 2-1.3:1.0: 4 ports detected
[    1.760087] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[    1.760092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[    1.784090] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.052118] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.054168] ata3.00: ATA-8: WDC WD1001FAES-00W7A0, 05.01D05, max UDMA/133
[    2.054170] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.056340] ata3.00: configured for UDMA/133
[    2.056635] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1001FAES-0 1D05 PQ: 0 ANSI: 5
[    2.056930] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.056986] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.057000] sd 2:0:0:0: [sda] Write Protect is off
[    2.057002] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.057072] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.092852]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
[    2.093954] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.356535] [TTM] Zone  kernel: Available graphics memory: 2011226 kiB
[    2.356536] [TTM] Initializing pool allocator
[    2.356539] [TTM] Initializing DMA pool allocator
[    2.356550] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[    2.356551] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.356554] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.356555] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.356556] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    2.356558] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    2.356559] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020
[    2.356567] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000
[    2.356569] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    2.356570] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    2.356570] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    2.357482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.357482] [drm] Driver supports precise vblank timestamp query.
[    2.358496] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.462868] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 000000000274877c
[    2.464274] fbcon: nouveaufb (fb0) is primary device
[    2.464323] Console: switching to colour frame buffer device 240x67
[    2.464345] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.532127] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.536098] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.547071] ata4.00: ATAPI: PIONEER DVD-RW  DVR-219L, 1.01, max UDMA/100
[    2.559836] ata4.00: configured for UDMA/100
[    2.567420] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-219L 1.01 PQ: 0 ANSI: 5
[    2.695655] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.695658] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.695867] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.695933] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.784415] clocksource: Switched to clocksource tsc
[    3.172131] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.174988] ata5.00: ATA-8: WDC WD1001FAES-00W7A0, 05.01D05, max UDMA/133
[    3.174991] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.177268] ata5.00: configured for UDMA/133
[    3.177550] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1001FAES-0 1D05 PQ: 0 ANSI: 5
[    3.177892] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.178097] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.178164] sd 4:0:0:0: [sdb] Write Protect is off
[    3.178165] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.178249] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.182741]  sdb: sdb1
[    3.183104] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.491037] ata6: SATA link down (SStatus 0 SControl 300)
[    5.059703] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[    5.063745] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    6.395943] random: crng init done
[    6.396950] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.454635] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.472224] systemd[1]: Detected architecture x86-64.
[    6.481232] systemd[1]: Set hostname to <PC4>.
[    6.960083] usb 2-1.4: device descriptor read/64, error -110
[    9.206020] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.206165] systemd[1]: Created slice System Slice.
[    9.206236] systemd[1]: Listening on Journal Socket.
[    9.206661] systemd[1]: Starting Uncomplicated firewall...
[    9.207152] systemd[1]: Mounting Huge Pages File System...
[    9.222957] systemd[1]: Starting Load Kernel Modules...
[    9.223439] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.634029] lp: driver loaded but no devices found
[    9.644753] ppdev: user-space parallel port driver
[    9.870105] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[   10.103026] systemd-journald[277]: Received request to flush runtime journal from PID 1
[   22.576080] usb 2-1.4: device descriptor read/64, error -110
[   22.764092] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[   22.788940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.854465] snd_hda_intel 0000:01:00.1: Disabling MSI
[   22.854469] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   22.880321] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   22.880323] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   22.880323] RAPL PMU: hw unit of domain package 2^-16 Joules
[   22.880324] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   22.887334] AVX version of gcm_enc/dec engaged.
[   22.887335] AES CTR mode by8 optimization enabled
[   22.914947] intel_rapl: Found RAPL domain package
[   22.914948] intel_rapl: Found RAPL domain core
[   23.504680] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   23.504682] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.504684] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   23.504684] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   23.504685] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
[   23.504686] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   23.504688] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   23.504689] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   23.504690] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   23.504691] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   23.514255] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247)
[   23.514260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.514280] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   23.518333] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   23.518369] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   23.518400] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   23.518432] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   23.518466] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   23.518609] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   23.518641] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   24.012104] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   24.080322] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   24.080357] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   24.080389] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   24.080419] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   26.693578] Adding 4095996k swap on /dev/sda7.  Priority:-2 extents:1 across:4095996k FS
[   27.671966] audit: type=1400 audit(1524718442.352:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=711 comm="apparmor_parser"
[   27.671969] audit: type=1400 audit(1524718442.352:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=711 comm="apparmor_parser"
[   27.671970] audit: type=1400 audit(1524718442.352:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=711 comm="apparmor_parser"
[   27.672333] audit: type=1400 audit(1524718442.356:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=707 comm="apparmor_parser"
[   27.672335] audit: type=1400 audit(1524718442.356:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=707 comm="apparmor_parser"
[   27.672336] audit: type=1400 audit(1524718442.356:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=707 comm="apparmor_parser"
[   27.672338] audit: type=1400 audit(1524718442.356:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=707 comm="apparmor_parser"
[   27.672891] audit: type=1400 audit(1524718442.356:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=712 comm="apparmor_parser"
[   27.673602] audit: type=1400 audit(1524718442.356:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=713 comm="apparmor_parser"
[   27.673604] audit: type=1400 audit(1524718442.356:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=713 comm="apparmor_parser"
[   27.952124] usb 2-1.4: device descriptor read/64, error -110
[   33.040666] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   33.207870] r8169 0000:04:00.0 enp4s0: link down
[   33.207880] r8169 0000:04:00.0 enp4s0: link down
[   33.207936] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   35.082129] r8169 0000:04:00.0 enp4s0: link up
[   35.082140] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   43.568108] usb 2-1.4: device descriptor read/64, error -110
[   43.676234] usb 2-1-port4: attempt power cycle
[   44.280100] usb 2-1.4: new high-speed USB device number 6 using ehci-pci
[   54.960111] usb 2-1.4: device not accepting address 6, error -110
[   55.040119] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[   55.667042] rfkill: input handler disabled
[   65.712125] usb 2-1.4: device not accepting address 7, error -110
[   65.712365] usb 2-1-port4: unable to enumerate USB device
[   65.792128] usb 2-1.8: new high-speed USB device number 8 using ehci-pci
[   66.158103] usb 2-1.8: New USB device found, idVendor=046d, idProduct=081d
[   66.158107] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[   66.158110] usb 2-1.8: SerialNumber: 6C9617C0
[   66.174140] media: Linux media interface: v0.10
[   66.178849] Linux video capture interface: v2.00
[   66.395590] usb 2-1.8: current rate 0 is different from the runtime rate 16000
[   66.399019] usb 2-1.8: current rate 0 is different from the runtime rate 24000
[   66.402367] usb 2-1.8: current rate 0 is different from the runtime rate 32000
[   66.405964] usb 2-1.8: current rate 0 is different from the runtime rate 48000
[   66.419209] usb 2-1.8: set resolution quirk: cval->res = 384
[   66.419694] usbcore: registered new interface driver snd-usb-audio
[   66.419743] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[   66.432322] uvcvideo 2-1.8:1.2: Entity type for entity Extension 4 was not initialized!
[   66.432325] uvcvideo 2-1.8:1.2: Entity type for entity Processing 2 was not initialized!
[   66.432326] uvcvideo 2-1.8:1.2: Entity type for entity Camera 1 was not initialized!
[   66.432328] uvcvideo 2-1.8:1.2: Entity type for entity Extension 5 was not initialized!
[   66.432330] uvcvideo 2-1.8:1.2: Entity type for entity Extension 6 was not initialized!
[   66.432331] uvcvideo 2-1.8:1.2: Entity type for entity Extension 7 was not initialized!
[   66.432333] uvcvideo 2-1.8:1.2: Entity type for entity Extension 8 was not initialized!
[   66.432591] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/input/input15
[   66.432793] usbcore: registered new interface driver uvcvideo
[   66.432794] USB Video Class driver (1.1.1)
[  429.759556] usb 2-1.4: new high-speed USB device number 9 using ehci-pci
[  434.987555] usb 2-1.4: device descriptor read/64, error -110
[  450.607550] usb 2-1.4: device descriptor read/64, error -110
[  450.795549] usb 2-1.4: new high-speed USB device number 10 using ehci-pci
[  455.979549] usb 2-1.4: device descriptor read/64, error -110
[  471.595546] usb 2-1.4: device descriptor read/64, error -110
[  471.703677] usb 2-1-port4: attempt power cycle
[  471.783550] usb 2-1.8: reset high-speed USB device number 8 using ehci-pci
[  472.307550] usb 2-1.4: new high-speed USB device number 11 using ehci-pci
[  482.987544] usb 2-1.4: device not accepting address 11, error -110
[  483.067517] usb 2-1.4: new high-speed USB device number 12 using ehci-pci
[  493.739544] usb 2-1.4: device not accepting address 12, error -110
[  493.739640] usb 2-1-port4: unable to enumerate USB device
gerard@PC4:~$ 
 

http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#14 Le 26/04/2018, à 11:31

winux

Re : Ub18.04 très lent après le login

Re
En fait rien n'est résolu du tout et c'est très paradoxal

J'ai démarré sur une live-key 16.04.4 que j'avais sous la main
fait une sauvegarde Partimage pour conserver cette version qui me paraissait plus performante
et c'est au reboot suivant sur HD que j'ai constaté les dégâts

du démarrage à login : 1mn 14s (n'est-ce pas un peu long pour une version soi-disant plus rapide ?)
(voir caractéristiques de mon PC, qui pédale bien, dans ma signature)

du login au bureau affiché : 54s (là c'est carrément trop long !!)

Cela vous inspire-t-il à nouveau ?
Pensez-vous que tout réinstaller (c'est quand même un peu de boulot) avec la version du jour résoudrait le Pb vu que j'ai installé (avec mises à jour) la version d'il y a un bon mois ??

Grosse grosse déception !! merci pour votre aide

Dernière modification par winux (Le 26/04/2018, à 11:32)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#15 Le 26/04/2018, à 11:50

malbo

Re : Ub18.04 très lent après le login

winux a écrit :

En fait rien n'est résolu du tout

J'allais justement poster pour dire que l'analyse des différences entre le dmesg de ton post #7 et celui de ton post #13 ne me permettait pas de trouver ce qui était la cause du problème. Je ne sais pas si on peut l'affirmer mais il semble bien que la présence des lignes "usb 2-1.4: device descriptor read/64, error -110" ne soit pas importante par rapport à ton problème de lenteur. Je veux dire que c'est peut-être une anomalie dont il faudra s'inquiéter ultérieurement mais ça ne doit pas avoir un rapport avec ton pb de démarrage lent.

Dernière modification par malbo (Le 26/04/2018, à 11:52)

Hors ligne

#16 Le 26/04/2018, à 12:02

inbox

Re : Ub18.04 très lent après le login

Salut,

Que répond cette commande ?

lsusb

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

Hors ligne

#17 Le 26/04/2018, à 12:15

winux

Re : Ub18.04 très lent après le login

@ inbox : merci pour ta réponse, voici le résultat

 gerard@PC4:~$ lsusb
Bus 002 Device 008: ID 046d:081d Logitech, Inc. HD Webcam C510
Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  

@ malbo : merci pour ta réponse, tu as fait au mieux mais ça n'a pas l'air évident à trouver

Comme je vais partir en voyage, j'attends un mois et si c'est pareil je réinstalle avec la dernière version. Je verrai bien !
Théoriquement ça devrait résoudre le Pb si je suis le seul dans ce cas de figure, sinon ce sera du hardware, plus dur à trouver.

Néanmoins ça ne me l'a jamais fait avant, même sur cette version, c'est pourquoi je me dis qu'une saloperie a dû se mettre dans le logiciel suite à une mise à jour, et elle perdure depuis.

Qu'en pensez-vous ?

Dernière modification par winux (Le 26/04/2018, à 12:16)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#18 Le 26/04/2018, à 12:25

ylag

Re : Ub18.04 très lent après le login

@winux:

Salut,

As-tu tenté un démarrage avec seulement la souris et la webcam de branchés sur les ports USB, si possible ?

A+

Dernière modification par ylag (Le 26/04/2018, à 12:26)

Hors ligne

#19 Le 26/04/2018, à 12:43

GammaDraconis

Re : Ub18.04 très lent après le login

winux a écrit :

Comme je l'expliquais en #5 j'utilise EXT3 pour pouvoir sauvegarder avec Partimage qui n'accepte pas EXT4 (dommage) car je trouve Clonezilla beaucoup moins convivial

Tu es sûr ? parceque c'est vraiment un très mauvais logiciel de sauvegarde si il ne gère pas l'ext4, système de fichier utilisé partout sous linux depuis de nombreuses années ! De plus je viens de regardes des captures d'écrans, il ne semble pas plus convivial que CloneZilla.

Au moins grâce à toi j'ai appris une chose : il ne faut surtout pas recommander d'utiliser PartImage.

CloneZilla n'est pas si compliqué que ça, une fois qu'on sait faire c'est très simple et rapide. C'est simplement la 1ère fois ou ça paraît pas évident car il y a beaucoup d'option/menu.

CloneZilla reste donc le meilleur logiciel de clonage opensource pour l'instant.

Hors ligne

#20 Le 26/04/2018, à 12:54

ylag

Re : Ub18.04 très lent après le login

Salut,

GammaDraconis a écrit :

CloneZilla n'est pas si compliqué que ça, une fois qu'on sait faire c'est très simple et rapide. C'est simplement la 1ère fois ou ça paraît pas évident car il y a beaucoup d'option/menu.

+1, je l'utilise sans problèmes particuliers depuis au moins deux ans.

A+

Hors ligne

#21 Le 26/04/2018, à 13:04

winux

Re : Ub18.04 très lent après le login

ylag a écrit :

@winux:
As-tu tenté un démarrage avec seulement la souris et la webcam de branchés sur les ports USB, si possible ?

Hello ylag
Bonne idée, je tente, mais le Pb est que j'ai des USB en face avant qui sont raccordées à des ports internes (sur la CM je crois).
Je vais quand même essayer d'ôter tout ce que je vois, merci

EDIT : j'ai ôté les 2 seules possibles qui ramenaient USB3 en face avant mais no change.
En fait je n'ai de connecté que souris et webcam

Dernière modification par winux (Le 26/04/2018, à 13:29)


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#22 Le 26/04/2018, à 13:18

winux

Re : Ub18.04 très lent après le login

GammaDraconis a écrit :

c'est vraiment un très mauvais logiciel de sauvegarde si il ne gère pas l'ext4

Je ne dirais pas ça comme ça !
c'est un excellent logiciel de sauvegarde et très simple, quand on sait s'en servir !! et de plus très rapide,
Son seul défaut c'est de ne pas gérer EXT4 qui en fait, depuis qu'il existe, ne m'a jamais manqué.

Mais comme je ne suis pas buté/borné, je conçois que EXT4 soit plus performant, c'est juste que je n'aime pas Clonezilla, mais je vais peut-être re-essayer car ça m'embête quand même de toujours trainer mon EXT3 ... qui fait le job néanmoins, mais il faut être de son temps !!

GammaDraconis a écrit :

CloneZilla n'est pas si compliqué que ça, une fois qu'on sait faire c'est très simple et rapide. C'est simplement la 1ère fois ou ça paraît pas évident car il y a beaucoup d'option/menu.

Peut-être trop d'options ce qui fait qu'on a du mal à choisir.
Si tu as un bon tuto qui donne les paramètres à employer par défaut  pour juste la sauvegarde d'une partition, je suis prêt à me convertir et si je suis convaincu faire passer le message à mes copains qui sont tous Partimage addict !!


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne

#23 Le 26/04/2018, à 13:31

GammaDraconis

Re : Ub18.04 très lent après le login

Si tu veux sauvegarder une partition précise dans un fichier image (.img) sous clonezilla il suffit grossomodo de faire :

- "device-image"
- "local_dev" puis tu choisis la partition sur laquelle tu veux sauvegarder le fichier image puis le répertoire ou sous-répertoire dans laquel le fichier sera crée dans cette partition.
- Si tu veux moins d'option pour la suite, tu choisi le mode débutant "beginner".

-Ensuite tu as le choix entre sauvegarder complètement le disque (savedisk) ou uniquement des partitions (saveparts), dans ton cas tu choisis donc "saveparts".

- Tu met le nom que tu veux pour ton fichier de backup

- et ensuite quand ça demandera tu choisi la ou les partitions à sauvegarder

grossomodo c'est comme ça, les autres trucs (choix clavier etc...) tu peux laisser par défaut. Biensûr il y a des options possibles comme découper le fichier de backup en morceau, choisir le niveau de compression du backup etc... mais tu t'en fout.

En faite le piège c'est qu'on te demande en 1er non pas ce que tu veux sauvegarder mais là ou tu veux sauvegarder (ou le fichier image sera stocké, il va créer un montage /home/partimag pour ça) et c'est seulement après que tu choisis les partitions à sauvegarder.

Dernière modification par GammaDraconis (Le 26/04/2018, à 13:51)

Hors ligne

#24 Le 26/04/2018, à 13:40

GammaDraconis

Re : Ub18.04 très lent après le login

Hors ligne

#25 Le 26/04/2018, à 13:45

winux

Re : Ub18.04 très lent après le login

GammaDraconis a écrit :

En faite je crois que Clonezilla utilise aussi PartImage comme composant car le nom apparaît. En tout cas il peux sauvegarder/restaurer du l'ext4 sans problème.

Exact, j'ai oublié de le mentionner tout à l'heure. Je crois que les développements Partimage sont plus ou moins arrêtés (sauf les update pour être compatible avec les nouvelles versions Ubuntu), c'est pour ça que Clonezilla a pris la suite pour pallier le manque de EXT4 et rajouter des trucs qui ne me servent pas.

GammaDraconis a écrit :

Si tu veux sauvegarder une partition précise dans un fichier image (.img) sous clonezilla il suffit grossomodo de faire :

merci GammaDraconis pour ces précieuses infos, je vais m'y remettre et comme tu m'as l'air un fidèle défenseur de la chose, je reviendrai vers toi (sans abuser bien sûr !!) si ça coince qq part

Ma feuille de route
- tester Clonezilla sur ma version Ub actuelle
- si OK je réinstalle en EXT4 et sauvegarde avec CLONEZILLA bien sûr!!

Merci et @+


http://i3.tinypic.com/4g8nio8.png
Livebox fibre - 280 Mbps utiles -  Triple  boot : Ubuntu 16.04 & 18.04 / W10 - Ecran : Samsung 22" -
CM : Gigabyte P67A UD3 B3 - CPU : Intel Quad Core i5 3.3 GHz - GPU : nVidia Gigabyte N430
RAM : 4 Go DDR3 - deux HD : 1To chacun

Hors ligne