Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 04/01/2008, à 17:05

zionman

carte pci wifi pas activer

Je viens d'installer un Carte pci TP-link TL-WN651-g et de plus celle-ci est très bien reconnu par Mon Kubuntu 7.10 en dual boot sur mon pc

iw config me donne
jef@jef-desktop:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.

sit0      no wireless extensions.
Cependant ma carte est bien présente avec
jef@jef-desktop:~$ lspci | grep Ethernet
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
01:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:08.0 Ethernet controller: Atheros Communications, Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)

Voilà mad-wifi tools est installer et la je sais plus....

Hors ligne

#2 Le 04/01/2008, à 17:13

zionman

Re : carte pci wifi pas activer

jef@jef-desktop:~$ sudo lshw -C network
[sudo] password for jef:
  *-network               
       description: Ethernet interface
       product: nForce2 Ethernet Controller
       vendor: nVidia Corporation
       physical id: 4
       bus info: pci@0000:00:04.0
       logical name: eth0
       version: a1
       serial: 00:0e:a6:15:c6:97
       size: 10MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.54 duplex=half latency=0 link=no maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII speed=10MB/s
  *-network:0
       description: Ethernet interface
       product: 88E8001 Gigabit Ethernet Controller
       vendor: Marvell Technology Group Ltd.
       physical id: 4
       bus info: pci@0000:01:04.0
       logical name: eth1
       version: 13
       serial: 00:0e:a6:15:d2:4f
       size: 100MB/s
       capacity: 1GB/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=skge driverversion=1.5 duplex=full firmware=N/A ip=192.168.0.1 latency=32 link=yes maxlatency=31 mingnt=23 module=skge multicast=yes port=twisted pair speed=100MB/s
  *-network:1 UNCLAIMED
       description: Ethernet controller
       product: AR5212/AR5213 Multiprotocol MAC/baseband processor
       vendor: Atheros Communications, Inc.
       physical id: 8
       bus info: pci@0000:01:08.0
       version: 01
       width: 32 bits
       clock: 33MHz

       capabilities: pm bus_master cap_list
       configuration: latency=32 maxlatency=28 mingnt=10

Hors ligne

#3 Le 04/01/2008, à 17:53

vogia

Re : carte pci wifi pas activer

t'as un processeur Atheros dans ta carte wifi

donc essai dans /etc/network/interfaces de configurer tout et d'apeler ton interface wifi 'ath0' dans ce fichier interfaces

ensuite tu tapes

/etc/init.d/networking restart

et tu nous indiques si y a des injures et lesquelles

#4 Le 04/01/2008, à 18:47

willy78

Re : carte pci wifi pas activer

Salut
Y'en une injure là  (salut vogia wink ):
UNCLAIMED
Pas de driver de charger pour cette carte:
fais ça pour voir

sudo modprobe ath_pci

et donnes ces retour:

iwlist scan
sudo lshw -C network

Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum

Hors ligne

#5 Le 05/01/2008, à 13:20

zionman

Re : carte pci wifi pas activer

Voilà  mon fichier /etc/network/interfaces

auto lo
iface lo inet loopback


#iface eth0 inet dhcp

auto eth2
#iface eth2 inet dhcp

auto ath0
#iface ath0 inet dhcp

auto wlan0
#iface wlan0 inet dhcp

jef@jef-desktop:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces...                                          Ignoring unknown interface eth2=eth2.
Ignoring unknown interface ath0=ath0.
Ignoring unknown interface wlan0=wlan0.

Et la suite,

jef@jef-desktop:~$ sudo modprobe ath_pci
[sudo] password for jef:
FATAL: Module ath_pci not found.
jef@jef-desktop:~$ iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

sit0      Interface doesn't support scanning.

jef@jef-desktop:~$ sudo lshw -C network
  *-network               
       description: Ethernet interface
       product: nForce2 Ethernet Controller
       vendor: nVidia Corporation
       physical id: 4
       bus info: pci@0000:00:04.0
       logical name: eth0
       version: a1
       serial: 00:0e:a6:15:c6:97
       size: 10MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.54 duplex=half latency=0 link=no maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII speed=10MB/s
  *-network:0
       description: Ethernet interface
       product: 88E8001 Gigabit Ethernet Controller
       vendor: Marvell Technology Group Ltd.
       physical id: 4
       bus info: pci@0000:01:04.0
       logical name: eth1
       version: 13
       serial: 00:0e:a6:15:d2:4f
       size: 100MB/s
       capacity: 1GB/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=skge driverversion=1.5 duplex=full firmware=N/A ip=192.168.0.1 latency=32 link=yes maxlatency=31 mingnt=23 module=skge multicast=yes port=twisted pair speed=100MB/s
  *-network:1 UNCLAIMED
       description: Ethernet controller
       product: AR5212/AR5213 Multiprotocol MAC/baseband processor
       vendor: Atheros Communications, Inc.
       physical id: 8
       bus info: pci@0000:01:08.0
       version: 01
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list
       configuration: latency=32 maxlatency=28 mingnt=10

Hors ligne

#6 Le 05/01/2008, à 14:17

willy78

Re : carte pci wifi pas activer

Tu ne doit pas avoir les modules proprio!
ok essaye ça:

sudo apt-get install linux-restricted-modules

Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum

Hors ligne

#7 Le 05/01/2008, à 14:43

zionman

Re : carte pci wifi pas activer

Merci trop fort... Mon pb est régler.

Dernière modification par zionman (Le 05/01/2008, à 14:45)

Hors ligne

#8 Le 25/01/2008, à 01:52

hanuman

Re : carte pci wifi pas activer

salut j'ai un probleme plutot similaire ...
du moins je pense. pouvez vous me filller un coup de main...

yoann@yoann-portable:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

irda0     no wireless extensions.

yoann@yoann-portable:~$ lspci | grep Ethernet
02:04.0 Ethernet controller: Atheros Communications, Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)

yoann@yoann-portable:~$ sudo lshw -C network
  *-network:0 UNCLAIMED   
       description: Ethernet controller
       product: AR5212/AR5213 Multiprotocol MAC/baseband processor
       vendor: Atheros Communications, Inc.
       physical id: 4
       bus info: pci@0000:02:04.0
       version: 01
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list
       configuration: latency=64 maxlatency=28 mingnt=10
  *-network:1
       description: Ethernet interface
       product: NetXtreme BCM5705M_2 Gigabit Ethernet
       vendor: Broadcom Corporation
       physical id: e
       bus info: pci@0000:02:0e.0
       logical name: eth0
       version: 03
       serial: 00:0d:9d:8d:aa:5e
       size: 100MB/s
       capacity: 1GB/s
       width: 64 bits
       clock: 66MHz
       capabilities: pm vpd msi bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.77 duplex=full firmware=5705-v3.14 ip=192.168.0.3 latency=64 link=yes mingnt=64 module=tg3 multicast=yes port=twisted pair speed=100MB/s

yoann@yoann-portable:~$ sudo modprobe ath_pci
FATAL: Error inserting ath_pci (/lib/modules/2.6.22-14-generic/net/ath_pci.ko): Unknown symbol in module, or unknown parameter (see dmesg)

merci d'avance...

Hors ligne

#9 Le 25/01/2008, à 18:50

hanuman

Re : carte pci wifi pas activer

j'ai resolu mon probleme...

si quelqu un a le meme prob.
En fait il fallait que je reinstalle les pilotes madwifi
roll

Hors ligne