#51 Le 17/05/2020, à 21:42
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
Oui c'est fait j'ai tout réinstalé sur le petit SSD :
marco@marco-N14xWU:~$ sudo smartctl -H -i /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: WD Blue and Green SSDs
Device Model: WDC WDS120G2G0B-00EPW0
Serial Number: 183168800794
LU WWN Device Id: 5 001b44 8b63dd2ec
Firmware Version: UI450000
User Capacity: 120040980480 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 17 22:41:55 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
marco@marco-N14xWU:~$ ...Ubuntu Rocks....
Hors ligne
#52 Le 17/05/2020, à 21:52
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
Résultat du teste fais sur /sdb (le SSD) sur lequel j'ai tout réinstallé :
marco@marco-N14xWU:~$ sudo smartctl -l selftest /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1090 -
# 2 Short offline Completed without error 00% 1083 -
# 3 Extended offline Completed without error 00% 479 -
# 4 Extended offline Self-test routine in progress 30% 479 -
# 5 Extended offline Self-test routine in progress 30% 479 -
# 6 Extended offline Self-test routine in progress 30% 479 -
# 7 Extended offline Self-test routine in progress 30% 479 -
# 8 Extended offline Self-test routine in progress 30% 479 -
# 9 Extended offline Self-test routine in progress 30% 479 -
#10 Extended offline Self-test routine in progress 30% 479 -
#11 Extended offline Self-test routine in progress 30% 479 -
#12 Extended offline Self-test routine in progress 30% 479 -
#13 Extended offline Self-test routine in progress 30% 479 -
#14 Extended offline Self-test routine in progress 30% 479 -
#15 Extended offline Self-test routine in progress 30% 479 -
#16 Extended offline Self-test routine in progress 40% 479 -
#17 Extended offline Self-test routine in progress 40% 479 -
#18 Extended offline Self-test routine in progress 40% 479 -
#19 Extended offline Self-test routine in progress 40% 479 -
#20 Extended offline Self-test routine in progress 40% 479 -
#21 Extended offline Self-test routine in progress 40% 479 -
marco@marco-N14xWU:~$ marco@marco-N14xWU:~$ sudo smartctl -s on -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: WD Blue and Green SSDs
Device Model: WDC WDS120G2G0B-00EPW0
Serial Number: 183168800794
LU WWN Device Id: 5 001b44 8b63dd2ec
Firmware Version: UI450000
User Capacity: 120040980480 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 17 22:50:27 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1090
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1272
165 Block_Erase_Count 0x0032 100 100 000 Old_age Always - 827
166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 9
167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 0
168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 14
169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 131
170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Average_PE_Cycles_TLC 0x0032 100 100 000 Old_age Always - 9
174 Unexpected_Power_Loss 0x0032 100 100 000 Old_age Always - 62
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
194 Temperature_Celsius 0x0022 072 045 000 Old_age Always - 28 (Min/Max 10/45)
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
230 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0x022401500224
232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100
233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 1070
234 NAND_GB_Written_SLC 0x0032 100 100 000 Old_age Always - 4606
241 Host_Writes_GiB 0x0030 100 100 000 Old_age Offline - 1803
242 Host_Reads_GiB 0x0030 100 100 000 Old_age Offline - 825
244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1090 -
# 2 Short offline Completed without error 00% 1083 -
# 3 Extended offline Completed without error 00% 479 -
# 4 Extended offline Self-test routine in progress 30% 479 -
# 5 Extended offline Self-test routine in progress 30% 479 -
# 6 Extended offline Self-test routine in progress 30% 479 -
# 7 Extended offline Self-test routine in progress 30% 479 -
# 8 Extended offline Self-test routine in progress 30% 479 -
# 9 Extended offline Self-test routine in progress 30% 479 -
#10 Extended offline Self-test routine in progress 30% 479 -
#11 Extended offline Self-test routine in progress 30% 479 -
#12 Extended offline Self-test routine in progress 30% 479 -
#13 Extended offline Self-test routine in progress 30% 479 -
#14 Extended offline Self-test routine in progress 30% 479 -
#15 Extended offline Self-test routine in progress 30% 479 -
#16 Extended offline Self-test routine in progress 40% 479 -
#17 Extended offline Self-test routine in progress 40% 479 -
#18 Extended offline Self-test routine in progress 40% 479 -
#19 Extended offline Self-test routine in progress 40% 479 -
#20 Extended offline Self-test routine in progress 40% 479 -
#21 Extended offline Self-test routine in progress 40% 479 -
Selective Self-tests/Logging not supported
marco@marco-N14xWU:~$ teste sur /sda (le disque defectueux) que j'ai totalement vidé :
marco@marco-N14xWU:~$ sudo smartctl -l selftest /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 4079 1400416392
# 2 Short offline Completed: read failure 90% 4078 1400416392
# 3 Extended offline Completed without error 00% 1809 -
# 4 Short offline Completed without error 00% 1806 -
marco@marco-N14xWU:~$ marco@marco-N14xWU:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate FireCuda 2.5
Device Model: ST1000LX015-1U7172
Serial Number: WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun May 17 22:52:11 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 164) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 050 050 006 Pre-fail Always - 214294155
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1300
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 6848
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 130712641
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4081 (88 19 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1271
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 051 051 000 Old_age Always - 49
188 Command_Timeout 0x0032 099 097 000 Old_age Always - 115966148639
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 055 040 Old_age Always - 33 (Min/Max 33/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 6
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1659
194 Temperature_Celsius 0x0022 033 045 000 Old_age Always - 33 (0 15 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 56
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 56
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4073h+34m+38.594s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9170563748
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157770126
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 49 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 49 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:15:08.606 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.573 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.541 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.540 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.540 READ FPDMA QUEUED
Error 48 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 00:14:44.562 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.560 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.557 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.555 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.553 READ FPDMA QUEUED
Error 47 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 70 ff ff ff 4f 00 11:39:32.892 WRITE FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11:39:32.890 READ FPDMA QUEUED
61 00 20 ff ff ff 4f 00 11:39:32.890 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 11:39:32.889 WRITE FPDMA QUEUED
ef 10 03 00 00 00 a0 00 11:39:32.880 SET FEATURES [Enable SATA feature]
Error 46 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11:39:31.805 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 11:39:30.137 FLUSH CACHE EXT
61 00 08 ff ff ff 4f 00 11:39:30.137 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 11:39:30.135 FLUSH CACHE EXT
61 00 38 ff ff ff 4f 00 11:39:30.135 WRITE FPDMA QUEUED
Error 45 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11:39:29.205 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 11:39:29.195 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 11:39:29.185 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 11:39:29.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 11:39:29.115 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 4079 1400416392
# 2 Short offline Completed: read failure 90% 4078 1400416392
# 3 Extended offline Completed without error 00% 1809 -
# 4 Short offline Completed without error 00% 1806 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
marco@marco-N14xWU:~$ Vous en pensez quoi? faut-il que je pousse l'analyse, d'autres testes seraient utiles?
Merci de votre aide! j'ai appris bcp sur les disques sur et surtout à en avoir moins peur! :-)
Dernière modification par heronheronpetitpatapon (Le 17/05/2020, à 21:54)
...Ubuntu Rocks....
Hors ligne
#53 Le 18/05/2020, à 14:00
- geole
Re : Panne de disque dur [RESOLU]
heronheronpetitpatapon a écrit :
Bon le teste de badblocks vient de se terminer :
kubuntu@kubuntu:~$ sudo badblocks -nvs /dev/sda Pass completed, 976762584 bad blocks found. (976762584/0/0 errors) kubuntu@kubuntu:~$Il est bel et bien mort je crois :-p j'ai pu qu'a acheter un nouveau disque, un SSD pour le coup quite à y mettre le prix!
Je suis très surpris de ce résultat
Vu la taille du disque, vu que l'outil travaille en bloc de 1024 octets. La conclusion serait que pas un seul secteur est en bon état!
J'ai beaucoup de mal à le croire.
Comme je comprends que ubuntu est disponible après réinstallation sur la totalité du SSD, tu devrais lancer gnome disque utility,
et reformater la partition du disque dur avec contrôle de la qualité disque.
Une idée, supprimer toutes les partitions, en créer une de 50 Go, La formater. Regarder et relever le temps que cela prend.
Puis en créer une autre de 50 Go ou plus grande en fonction du temps pris ... Regarder le temps que cela prend.
Cela te ferait 20 partitions à tester. Normalement les 20 temps devraient être proches. Si l'un ou deux explosent, Cela signifie que ces endroits sont à problèmes.
Tu refais un rapport smartctl et en fonction du résultat: Disque à la déchetterie ou suppression des 20 partitions et création en fonction de tes besoins.
AJOUT
Model Family: Seagate FireCuda 2.5
Device Model: ST1000LX015-1U7172
Firmware Version: SDM1
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
===> sudo badblocks -nvs -b 4096 /dev/sdaDernière modification par geole (Le 18/05/2020, à 14:08)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#54 Le 18/05/2020, à 14:34
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
geole a écrit :
Comme je comprends que ubuntu est disponible après réinstallation sur la totalité du SSD, tu devrais lancer gnome disque utility,
et reformater la partition du disque dur avec contrôle de la qualité disque.
C'est lancé...4 à 5h d'attente...je réécris tout avec des zéro.
...Ubuntu Rocks....
Hors ligne
#55 Le 19/05/2020, à 10:17
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
Bon la messe est dite après avoir effacté le disque totalement (réécrit avec des zéro) fait une vérification approfondie et réécrit une nouvelle table de partition (le tout à pris bien 24h), le disque est toujours moribond, enfin je peux l'ouvrir et y stocker des fichier si je veux, mais d'après les données ci-dessous, comment dire, je ne préfère pas, surtout ci ce sont mes fichiers à moi 
:
marco@marco-N14xWU:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate FireCuda 2.5
Device Model: ST1000LX015-1U7172
Serial Number: WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 19 11:11:28 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 164) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 083 050 006 Pre-fail Always - 219103530
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1301
5 Reallocated_Sector_Ct 0x0033 089 089 036 Pre-fail Always - 6984
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 133625518
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4109 (94 50 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1272
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 051 051 000 Old_age Always - 49
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 115966214176
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 055 040 Old_age Always - 34 (Min/Max 23/41)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 6
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1660
194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 15 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4100h+41m+04.215s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11128344380
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157927137
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 49 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 49 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:15:08.606 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.573 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.541 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.540 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:15:08.540 READ FPDMA QUEUED
Error 48 occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 00:14:44.562 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.560 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.557 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.555 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:14:44.553 READ FPDMA QUEUED
Error 47 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 70 ff ff ff 4f 00 11:39:32.892 WRITE FPDMA QUEUED
60 00 08 ff ff ff 4f 00 11:39:32.890 READ FPDMA QUEUED
61 00 20 ff ff ff 4f 00 11:39:32.890 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 11:39:32.889 WRITE FPDMA QUEUED
ef 10 03 00 00 00 a0 00 11:39:32.880 SET FEATURES [Enable SATA feature]
Error 46 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11:39:31.805 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 11:39:30.137 FLUSH CACHE EXT
61 00 08 ff ff ff 4f 00 11:39:30.137 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 11:39:30.135 FLUSH CACHE EXT
61 00 38 ff ff ff 4f 00 11:39:30.135 WRITE FPDMA QUEUED
Error 45 occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 11:39:29.205 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 11:39:29.195 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 11:39:29.185 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 11:39:29.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 11:39:29.115 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4109 -
# 2 Short offline Completed without error 00% 4108 -
# 3 Short offline Completed: read failure 90% 4089 1400416392
# 4 Short offline Completed: read failure 90% 4089 1400416392
# 5 Short offline Completed: read failure 90% 4079 1400416392
# 6 Short offline Completed: read failure 90% 4078 1400416392
# 7 Extended offline Completed without error 00% 1809 -
# 8 Short offline Completed without error 00% 1806 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
marco@marco-N14xWU:~$ Aller je vais le changer, la suite ici --> https://forum.ubuntu-fr.org/viewtopic.p … #p22287742
merci à tous pour votre aide ça n'a aps été facile, mais j'ai appris bcp ces derniers jours sur les disques sdur et sur les testes SMART.
Dernière modification par heronheronpetitpatapon (Le 19/05/2020, à 10:21)
...Ubuntu Rocks....
Hors ligne
#56 Le 19/05/2020, à 11:14
- geole
Re : Panne de disque dur [RESOLU]
Bonjour.
Quelque soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.
Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très bien supporté.
Il reste juste à guetter l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.
Pour le tableau récapitulatif, j'ai repris les deux rapports en éliminant ce qui était identique.
la premier ligne est l'ancienne valeur, la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 051 051 006 Pre-fail Always - 181330119
1 Raw_Read_Error_Rate 0x000f 083 050 006 Pre-fail Always - 219103530
indique le taux d’erreur matérielle lors de la lecture de la surface du disque
Le taux de réussite est actuellement meilleur à 83% au lieu de 51%
Pendant la grosse réparation, il est descendu à 50%
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1295
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1301
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 6416
5 Reallocated_Sector_Ct 0x0033 089 089 036 Pre-fail Always - 6984
On savait qu'il y avait 48 secteurs illisibles en attente
D'autres ont été détectés pendant l'inspection soit pour un total de 568
Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 130680578
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 133625518
Taux d’erreurs d’accès des têtes magnétiques: Elles ont subit le choc avec succès.
Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite.
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4078 (190 57 0)
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4109 (94 50 0)
Donc 31 heures de fonctionnement intense.
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1269
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1272
188 Command_Timeout 0x0032 097 097 000 Old_age Always - 107376017436
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 115966214176
Il n'y a plus de commandes qui ne fonctionnent pas 100% de bonnes
190 Airflow_Temperature_Cel 0x0022 071 055 040 Old_age Always - 29 (Min/Max 29/34)
190 Airflow_Temperature_Cel 0x0022 066 055 040 Old_age Always - 34 (Min/Max 23/41)
Les ventilateurs sont efficaces
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1654
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1660
194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (0 15 0 0 0)
194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 15 0 0 0)
Le disque a à peine chauffé de 5 degrés
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 48
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 48
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
Le reformatage a été efficace. Il reste juste à surveiller ce compteur.
Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4070h+11m+17.640s
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4100h+41m+04.215s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9137893844
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11128344380
Il a donc écrit en 31 heures, 22% des écritures précédentes
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157475994
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157927137
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455
Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455
Donc pas de nouvelles erreurs pendant cette opération de remise en état Dernière modification par geole (Le 19/05/2020, à 12:35)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#57 Le 19/05/2020, à 12:05
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
Merci pour ces infos, oui ce script peut-être une très bonne idée malheureusement, je ne sais pas en écrire !
Voila le rapport complet je crois (créé avec gsmartmontools) qui affiches les 20 dernières erreurs au lieu des cinq précdément :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate FireCuda 2.5
Device Model: ST1000LX015-1U7172
Serial Number: WL1DK0PB
LU WWN Device Id: 5 000c50 0babc3293
Firmware Version: SDM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 19 13:01:07 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 164) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 052 050 006 - 5827928
3 Spin_Up_Time PO---- 099 099 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1301
5 Reallocated_Sector_Ct PO--CK 089 089 036 - 7128
7 Seek_Error_Rate POSR-- 081 060 045 - 133641001
9 Power_On_Hours -O--CK 096 096 000 - 4110 (211 33 0)
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1272
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 051 051 000 - 49
188 Command_Timeout -O--CK 100 097 000 - 115966214176
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 067 055 040 - 33 (Min/Max 23/41)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 6
192 Power-Off_Retract_Count -O--CK 100 100 000 - 53
193 Load_Cycle_Count -O--CK 100 100 000 - 1661
194 Temperature_Celsius -O---K 033 045 000 - 33 (0 15 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 4102h+30m+42.959s
241 Total_LBAs_Written ------ 100 253 000 - 11159208876
242 Total_LBAs_Read ------ 100 253 000 - 7157928227
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 6920 Device vendor specific log
0xa8 GPL,SL VS 136 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 7680 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xc2 GPL,SL VS 240 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xc4 GPL,SL VS 24 Device vendor specific log
0xc9 GPL,SL VS 1 Device vendor specific log
0xca GPL,SL VS 16 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 49 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 49 [8] occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 78 a8 88 00 00 Error: UNC at LBA = 0x5378a888 = 1400416392
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 78 a8 88 40 00 00:15:08.606 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 78 a8 80 40 00 00:15:08.573 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 78 a8 78 40 00 00:15:08.541 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 78 a8 70 40 00 00:15:08.540 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 78 a8 68 40 00 00:15:08.540 READ FPDMA QUEUED
Error 48 [7] occurred at disk power-on lifetime: 4078 hours (169 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 78 a8 88 00 00 Error: UNC at LBA = 0x5378a888 = 1400416392
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 53 78 7c 38 40 00 00:14:44.562 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 78 7b 38 40 00 00:14:44.560 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 78 7a 38 40 00 00:14:44.557 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 78 79 38 40 00 00:14:44.555 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 78 78 38 40 00 00:14:44.553 READ FPDMA QUEUED
Error 47 [6] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 70 00 00 3a 07 c3 80 40 00 11:39:32.892 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 98 40 00 11:39:32.890 READ FPDMA QUEUED
61 00 00 00 20 00 00 48 cf a4 e0 40 00 11:39:32.890 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 48 cc 74 b0 40 00 11:39:32.889 WRITE FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 00 11:39:32.880 SET FEATURES [Enable SATA feature]
Error 46 [5] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 11:39:31.805 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 11:39:30.137 FLUSH CACHE EXT
61 00 00 00 08 00 00 3a 07 c3 78 40 00 11:39:30.137 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 11:39:30.135 FLUSH CACHE EXT
61 00 00 00 38 00 00 3a 07 c3 40 40 00 11:39:30.135 WRITE FPDMA QUEUED
Error 45 [4] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 11:39:29.205 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 00 11:39:29.195 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 00 11:39:29.185 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 11:39:29.159 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 11:39:29.115 IDENTIFY DEVICE
Error 44 [3] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 11:39:28.317 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 90 40 00 11:39:28.316 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 88 40 00 11:39:28.316 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 80 40 00 11:39:28.314 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 78 40 00 11:39:28.314 READ FPDMA QUEUED
Error 43 [2] occurred at disk power-on lifetime: 3858 hours (160 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 53 9e 37 f0 40 00 11:39:27.318 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9e 36 f0 40 00 11:39:27.315 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9e 35 f0 40 00 11:39:27.311 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9e 34 f0 40 00 11:39:27.307 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9e 33 f0 40 00 11:39:27.303 READ FPDMA QUEUED
Error 42 [1] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 02:37:53.410 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 00 02:37:53.401 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:37:53.391 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 02:37:53.365 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 02:37:53.321 IDENTIFY DEVICE
Error 41 [0] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 02:37:52.419 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 90 40 00 02:37:52.418 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 88 40 00 02:37:52.418 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 80 40 00 02:37:52.418 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 78 40 00 02:37:52.418 READ FPDMA QUEUED
Error 40 [19] occurred at disk power-on lifetime: 3805 hours (158 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 53 9e 01 e0 40 00 02:37:51.780 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9e 00 e0 40 00 02:37:51.779 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9d ff e0 40 00 02:37:51.778 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9d fe e0 40 00 02:37:51.776 READ FPDMA QUEUED
60 00 00 01 00 00 00 53 9d fd e0 40 00 02:37:51.775 READ FPDMA QUEUED
Error 39 [18] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 18 00 00 53 10 04 80 40 00 01:46:30.187 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 48 c8 d5 28 40 00 01:46:30.184 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 53 14 05 c8 40 00 01:46:30.183 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 98 40 00 01:46:30.182 READ FPDMA QUEUED
61 00 00 00 08 00 00 48 c8 fb a0 40 00 01:46:30.182 WRITE FPDMA QUEUED
Error 38 [17] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 01:46:27.756 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:46:27.473 FLUSH CACHE EXT
61 00 00 00 08 00 00 3a 08 a4 98 40 00 01:46:27.472 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:46:27.471 FLUSH CACHE EXT
61 00 00 00 20 00 00 3a 08 a4 78 40 00 01:46:27.471 WRITE FPDMA QUEUED
Error 37 [16] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 01:46:02.688 READ FPDMA QUEUED
61 00 00 02 28 00 00 5a c7 79 d8 40 00 01:46:02.676 WRITE FPDMA QUEUED
61 00 00 02 20 00 00 5a c7 6a 68 40 00 01:46:02.676 WRITE FPDMA QUEUED
61 00 00 01 78 00 00 5a c6 cf 80 40 00 01:46:02.676 WRITE FPDMA QUEUED
61 00 00 01 58 00 00 5a c6 bd 70 40 00 01:46:02.676 WRITE FPDMA QUEUED
Error 36 [15] occurred at disk power-on lifetime: 3733 hours (155 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 38 00 00 5a 94 bb d8 40 00 01:46:02.134 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 5a 94 a5 90 40 00 01:46:02.134 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 5a 94 9d 10 40 00 01:46:02.134 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 5a 94 71 a0 40 00 01:46:02.134 WRITE FPDMA QUEUED
61 00 00 00 38 00 00 5a 94 5b 10 40 00 01:46:02.134 WRITE FPDMA QUEUED
Error 35 [14] occurred at disk power-on lifetime: 3731 hours (155 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 90 00 00 3a 04 8a 88 40 00 14:09:34.760 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 98 40 00 14:09:34.760 READ FPDMA QUEUED
61 00 00 00 08 00 00 4e 87 15 88 40 00 14:09:34.759 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 00 14:09:34.750 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 14:09:34.723 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 34 [13] occurred at disk power-on lifetime: 3731 hours (155 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 14:09:34.512 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 14:09:34.149 FLUSH CACHE EXT
61 00 00 00 08 00 00 3a 04 8a 80 40 00 14:09:34.148 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 a0 00 14:09:34.147 FLUSH CACHE EXT
61 00 00 00 40 00 00 3a 04 8a 40 40 00 14:09:34.147 WRITE FPDMA QUEUED
Error 33 [12] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 04 48 00 00 00 48 c0 00 40 00 00:37:52.412 WRITE FPDMA QUEUED
61 00 00 00 a8 00 00 48 d2 5e 30 40 00 00:37:52.412 WRITE FPDMA QUEUED
61 00 00 00 30 00 00 48 d2 5d e0 40 00 00:37:52.412 WRITE FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 98 40 00 00:37:52.412 READ FPDMA QUEUED
61 00 00 04 58 00 00 57 c4 4b 58 40 00 00:37:52.412 WRITE FPDMA QUEUED
Error 32 [11] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: WP at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 00 00 20 00 00 57 df aa 30 40 00 00:37:52.110 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 57 de e7 c8 40 00 00:37:52.109 WRITE FPDMA QUEUED
61 00 00 00 08 00 00 57 dc 09 70 40 00 00:37:52.108 WRITE FPDMA QUEUED
61 00 00 01 a8 00 00 3a 17 f5 f8 40 00 00:37:52.106 WRITE FPDMA QUEUED
61 00 00 00 10 00 00 4e 9a 25 c0 40 00 00:37:52.106 WRITE FPDMA QUEUED
Error 31 [10] occurred at disk power-on lifetime: 3717 hours (154 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 18 00 00 54 f4 42 48 40 00 00:37:20.514 READ FPDMA QUEUED
60 00 00 00 20 00 00 54 f4 42 20 40 00 00:37:20.514 READ FPDMA QUEUED
60 00 00 00 08 00 00 54 f4 42 40 40 00 00:37:20.509 READ FPDMA QUEUED
60 00 00 00 08 00 00 53 9e 37 98 40 00 00:37:20.493 READ FPDMA QUEUED
60 00 00 00 20 00 00 54 f4 42 00 40 00 00:37:20.482 READ FPDMA QUEUED
Error 30 [9] occurred at disk power-on lifetime: 3710 hours (154 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 53 9e 37 98 00 00 Error: UNC at LBA = 0x539e3798 = 1402877848
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 53 9e 37 98 40 00 09:07:22.763 READ FPDMA QUEUED
ef 00 10 00 03 00 00 00 00 00 00 a0 00 09:07:22.753 SET FEATURES [Enable SATA feature]
ef 00 10 00 02 00 00 00 00 00 00 a0 00 09:07:22.744 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 00 09:07:22.717 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 00 09:07:22.673 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4109 -
# 2 Short offline Completed without error 00% 4108 -
# 3 Short offline Completed: read failure 90% 4089 1400416392
# 4 Short offline Completed: read failure 90% 4089 1400416392
# 5 Short offline Completed: read failure 90% 4079 1400416392
# 6 Short offline Completed: read failure 90% 4078 1400416392
# 7 Extended offline Completed without error 00% 1809 -
# 8 Short offline Completed without error 00% 1806 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 23/41 Celsius
Lifetime Min/Max Temperature: 15/47 Celsius
Specified Max Operating Temperature: 34 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 30 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (71)
Index Estimated Time Temperature Celsius
72 2020-05-16 21:30 36 *****************
73 2020-05-16 22:00 ? -
74 2020-05-16 22:30 25 ******
75 2020-05-16 23:00 23 ****
76 2020-05-16 23:30 31 ************
77 2020-05-17 00:00 32 *************
78 2020-05-17 00:30 33 **************
79 2020-05-17 01:00 ? -
80 2020-05-17 01:30 25 ******
81 2020-05-17 02:00 25 ******
82 2020-05-17 02:30 33 **************
83 2020-05-17 03:00 34 ***************
... ..( 3 skipped). .. ***************
87 2020-05-17 05:00 34 ***************
88 2020-05-17 05:30 35 ****************
89 2020-05-17 06:00 ? -
90 2020-05-17 06:30 25 ******
91 2020-05-17 07:00 34 ***************
92 2020-05-17 07:30 34 ***************
93 2020-05-17 08:00 33 **************
94 2020-05-17 08:30 37 ******************
95 2020-05-17 09:00 38 *******************
96 2020-05-17 09:30 38 *******************
97 2020-05-17 10:00 37 ******************
98 2020-05-17 10:30 ? -
99 2020-05-17 11:00 25 ******
100 2020-05-17 11:30 37 ******************
101 2020-05-17 12:00 37 ******************
102 2020-05-17 12:30 31 ************
... ..( 2 skipped). .. ************
105 2020-05-17 14:00 31 ************
106 2020-05-17 14:30 30 ***********
107 2020-05-17 15:00 ? -
108 2020-05-17 15:30 25 ******
109 2020-05-17 16:00 25 ******
110 2020-05-17 16:30 ? -
111 2020-05-17 17:00 25 ******
112 2020-05-17 17:30 23 ****
113 2020-05-17 18:00 ? -
114 2020-05-17 18:30 25 ******
115 2020-05-17 19:00 34 ***************
116 2020-05-17 19:30 31 ************
117 2020-05-17 20:00 29 **********
118 2020-05-17 20:30 ? -
119 2020-05-17 21:00 25 ******
120 2020-05-17 21:30 26 *******
121 2020-05-17 22:00 27 ********
122 2020-05-17 22:30 34 ***************
... ..( 9 skipped). .. ***************
4 2020-05-18 03:30 34 ***************
5 2020-05-18 04:00 ? -
6 2020-05-18 04:30 25 ******
7 2020-05-18 05:00 36 *****************
8 2020-05-18 05:30 35 ****************
9 2020-05-18 06:00 36 *****************
10 2020-05-18 06:30 33 **************
11 2020-05-18 07:00 34 ***************
... ..( 2 skipped). .. ***************
14 2020-05-18 08:30 34 ***************
15 2020-05-18 09:00 35 ****************
16 2020-05-18 09:30 ? -
17 2020-05-18 10:00 25 ******
18 2020-05-18 10:30 23 ****
19 2020-05-18 11:00 31 ************
20 2020-05-18 11:30 33 **************
21 2020-05-18 12:00 34 ***************
... ..( 3 skipped). .. ***************
25 2020-05-18 14:00 34 ***************
26 2020-05-18 14:30 33 **************
27 2020-05-18 15:00 34 ***************
28 2020-05-18 15:30 35 ****************
29 2020-05-18 16:00 38 *******************
30 2020-05-18 16:30 38 *******************
31 2020-05-18 17:00 39 ********************
32 2020-05-18 17:30 40 *********************
... ..( 7 skipped). .. *********************
40 2020-05-18 21:30 40 *********************
41 2020-05-18 22:00 39 ********************
42 2020-05-18 22:30 40 *********************
... ..( 5 skipped). .. *********************
48 2020-05-19 01:30 40 *********************
49 2020-05-19 02:00 39 ********************
... ..( 12 skipped). .. ********************
62 2020-05-19 08:30 39 ********************
63 2020-05-19 09:00 35 ****************
64 2020-05-19 09:30 34 ***************
... ..( 4 skipped). .. ***************
69 2020-05-19 12:00 34 ***************
70 2020-05-19 12:30 33 **************
71 2020-05-19 13:00 33 **************
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 1272 --- Lifetime Power-On Resets
0x01 0x010 4 4110 --- Power-on Hours
0x01 0x018 6 11165168484 --- Logical Sectors Written
0x01 0x020 6 67405541 --- Number of Write Commands
0x01 0x028 6 7158283421 --- Logical Sectors Read
0x01 0x030 6 27187659 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 4104 --- Spindle Motor Power-on Hours
0x03 0x010 4 3989 --- Head Flying Hours
0x03 0x018 4 1661 --- Head Load Events
0x03 0x020 4 7128 --- Number of Reallocated Logical Sectors
0x03 0x028 4 44 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 689 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 32 --- Resets Between Cmd Acceptance and Completion
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS...Ubuntu Rocks....
Hors ligne
#58 Le 19/05/2020, à 12:42
- geole
Re : Panne de disque dur [RESOLU]
Bonjour.
Quel que soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.
Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très bien supporté.
Il reste juste à guetter l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.
Pour le tableau récapitulatif, j'ai repris les deux rapports en éliminant ce qui était identique.
la premiere ligne est l'ancienne valeur, la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 051 051 006 Pre-fail Always - 181330119
1 Raw_Read_Error_Rate 0x000f 083 050 006 Pre-fail Always - 219103530
indique le taux d’erreur matérielle lors de la lecture de la surface du disque
Le taux de réussite est actuellement meilleur à 83% au lieu de 51%
Pendant la grosse réparation, il est descendu à 50%
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1295
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1301
5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 6416
5 Reallocated_Sector_Ct 0x0033 089 089 036 Pre-fail Always - 6984
On savait qu'il y avait 48 secteurs illisibles en attente
D'autres ont été détectés pendant l'inspection soit pour un total de 568
Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 130680578
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 133625518
Taux d’erreurs d’accès des têtes magnétiques: Elles ont subit le choc avec succès.
Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite.
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4078 (190 57 0)
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4109 (94 50 0)
Donc 31 heures de fonctionnement intense.
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1269
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1272
188 Command_Timeout 0x0032 097 097 000 Old_age Always - 107376017436
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 115966214176
Il n'y a plus de commandes qui ne fonctionnent pas. 100% de bonnes
190 Airflow_Temperature_Cel 0x0022 071 055 040 Old_age Always - 29 (Min/Max 29/34)
190 Airflow_Temperature_Cel 0x0022 066 055 040 Old_age Always - 34 (Min/Max 23/41)
Les ventilateurs sont efficaces
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1654
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1660
194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (0 15 0 0 0)
194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 15 0 0 0)
Le disque a à peine chauffé de 5 degrés
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 48
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 48
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
Le reformatage a été efficace. Il reste juste à surveiller ces compteurs.
Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4070h+11m+17.640s
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4100h+41m+04.215s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9137893844
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11128344380
Il a donc écrit en 31 heures, 22% des écritures précédentes
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157475994
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157927137
Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455
Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455
Donc pas de nouvelles erreurs pendant cette opération de remise en état Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#59 Le 19/05/2020, à 14:07
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
geole a écrit :
Bonjour.
Quel que soit le disque, même s'il est un SSD, il peut toujours y avoir un ennui.
Tu peux toujours commettre une grosse erreur de manipulation supprimant toutes tes données.
Donc quel que soit l'état du disque, il est nécessaire de sécuriser le disque.Après ces 24 heures non-stop, il me semble qu'au premier coup d'oeil le disque a très bien supporté.
Il reste juste à guetter l'arrivée du premier secteur défectueux irrécupérable.
Je suis tenté par l'écriture d'un script qui alerterait par émail de cette arrivée.Pour le tableau récapitulatif, j'ai repris les deux rapports en éliminant ce qui était identique.
la premiere ligne est l'ancienne valeur, la seconde ligne est la nouvelle valeur.
Les lignes suivantes sont mes commentaires lorsque j'ai pensé utile de le mettre.ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 051 051 006 Pre-fail Always - 181330119 1 Raw_Read_Error_Rate 0x000f 083 050 006 Pre-fail Always - 219103530 indique le taux d’erreur matérielle lors de la lecture de la surface du disque Le taux de réussite est actuellement meilleur à 83% au lieu de 51% Pendant la grosse réparation, il est descendu à 50% 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1295 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1301 5 Reallocated_Sector_Ct 0x0033 090 090 036 Pre-fail Always - 6416 5 Reallocated_Sector_Ct 0x0033 089 089 036 Pre-fail Always - 6984 On savait qu'il y avait 48 secteurs illisibles en attente D'autres ont été détectés pendant l'inspection soit pour un total de 568 Mais il y a encore de la réserve avant le failing-now (6984/(100-89)*(89-36)=33000 7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 130680578 7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 133625518 Taux d’erreurs d’accès des têtes magnétiques: Elles ont subit le choc avec succès. Ceci est un point important. lorsque les têtes ne fonctionnent pas très bien, elles se dégradent de plus en plus vite. 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4078 (190 57 0) 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4109 (94 50 0) Donc 31 heures de fonctionnement intense. 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1269 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1272 188 Command_Timeout 0x0032 097 097 000 Old_age Always - 107376017436 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 115966214176 Il n'y a plus de commandes qui ne fonctionnent pas. 100% de bonnes 190 Airflow_Temperature_Cel 0x0022 071 055 040 Old_age Always - 29 (Min/Max 29/34) 190 Airflow_Temperature_Cel 0x0022 066 055 040 Old_age Always - 34 (Min/Max 23/41) Les ventilateurs sont efficaces 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1654 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1660 194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (0 15 0 0 0) 194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 15 0 0 0) Le disque a à peine chauffé de 5 degrés 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 48 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 48 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 Le reformatage a été efficace. Il reste juste à surveiller ces compteurs. Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4070h+11m+17.640s 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4100h+41m+04.215s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9137893844 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11128344380 Il a donc écrit en 31 heures, 22% des écritures précédentes 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157475994 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7157927137 Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455 Error 49 occurred at disk power-on lifetime: 4078 hours Error: UNC at LBA = 0x0fffffff = 268435455 Donc pas de nouvelles erreurs pendant cette opération de remise en état
Waaahhhooouuu quelle analyse, je suis bleuffé! Merci beaucoup! Ok donc si je comprend bien, d'parès ce que tu décris ici :
Geole a écrit :
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 48
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 48
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
Le reformatage a été efficace. Il reste juste à surveiller ces compteurs.
Suivant sa fréquence d'augmentation, tu pourras décider de reformater ou d'arrêter les frais.
Si dans quelques semaines je refais un teste et qu'il me sort 70 erreurs au lieu des 48 actuellement présentent, le disque ne doit alors plus être considéré comme fiable!
mais est-ce qu'il y'a un moyen d'isoler ces 48 secteurs de les regroupers dans un zone spécifique pour que j'évite d'écrire des données dessus, quite à perdre de l'espace ?
Bon je vais quand même me commander un gros SSD Barracuda de 2 To de chez Seagate, je serais tranquille!
...Ubuntu Rocks....
Hors ligne
#60 Le 19/05/2020, à 14:39
- geole
Re : Panne de disque dur [RESOLU]
Dans le passé il y avait 48 secteurs illisibles donc potentiellement 48 fichiers illisibles , l'opération de formatage les a expédiés dans une zone dédiée au secours avec les autres qui y étaient arrivés par précaution.. Actuellement il y a zéro secteur illisible (La seconde ligne des compteurs)
Dernière modification par geole (Le 19/05/2020, à 14:41)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#61 Le 19/05/2020, à 14:43
- heronheronpetitpatapon
Re : Panne de disque dur [RESOLU]
geole a écrit :
Dans le passé il y avait 48 secteurs illisibles donc potentiellement 48 fichiers illisibles , l'opération de formatage les a expédiés dans une zone dédiée au secours avec les autres qui y étaient arrivés par précaution.. Actuellement il y a zéro secteur illisible (La seconde ligne des compteurs)
Super j'avais du mal à comprendre merci!
...Ubuntu Rocks....
Hors ligne