Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#51 Le 22/04/2018, à 10:21

Jérome38

Re : "the system is running low card graphics" ? [non résolu]

Salut
J'ai eu le même problème, et pas envie de me battre  avec la ligne de commande pour remettre en fonctionnement. J'ai sauvegardé mes données et je suis passé à Ubuntu 18.04 daily-build. Depuis plus aucun problème.


Ubuntu 18.04 (Gnome) sous PC fixe et 20.04 (Gnome) sous PC portable

Hors ligne

#52 Le 22/04/2018, à 10:21

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Tu peux tenter (d'après http://simpledeveloper.com/system-runni … hics-mode/ )

sudo apt-get update
sudo apt-get -d install --reinstall gdm
sudo apt-get remove --purge gdm
sudo apt-get install gdm

et redémarrer (sudo reboot)
Si ça change rien, peux tu vérifier dans le bios qu'il n'y a pas une option secure boot activée? (ça doit être dans l'onglet "boot"). Si cette option existe et est activée, tu peux la désactiver.

Hors ligne

#53 Le 22/04/2018, à 11:58

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Merci beaucoup Naziel !!! (Y)
Mais en rallumant mon ordi ce soir, c'est revenu sad

sad

Donc il n'y a pas de solutions... sad

Dernière modification par arzavapi (Le 22/04/2018, à 19:28)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#54 Le 22/04/2018, à 19:31

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Naziel : je crois que je vais laisser ça dans "l'état"...

De toutes façons la nouvelles version de Ubuntu arrive bientôt -même si j'aurais bien aimé garder encore la 16.04 qui est stable-...

Je vais faire avec...


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#55 Le 22/04/2018, à 19:36

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Tu peux retenter? Tu as fait une mise à jour après?

Hors ligne

#56 Le 22/04/2018, à 19:55

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Non je n'ai pas fait

sudo apt full-upgrade

Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#57 Le 22/04/2018, à 20:11

moko138

Re : "the system is running low card graphics" ? [non résolu]

Montre aussi

sudo apt-get remove --purge zram-config

puis

sudo update-initramfs -u -k all && sudo update-grub

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#58 Le 22/04/2018, à 20:31

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

sudo apt-get -d install --reinstall gdm
[sudo] Mot de passe de pierre : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 0 o/19,6 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Téléchargement achevé et dans le mode téléchargement uniquement

Que veulent dire "les 3 dernières lignes il est nécessaire de prendre".... et "après cette opération O o d'espace disque seront utilisés", ainsi que "téléchargement activié et dans le mode téléchargement uniquement" ??? (zut j'ai effacé les 4 opérations sad )

Et pour le reste :

~$ sudo apt-get remove --purge zram-config
[sudo] Mot de passe de pierre : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
  zram-config*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 55,3 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] O
(Lecture de la base de données... 242719 fichiers et répertoires déjà installés.)
Suppression de zram-config (0.5) ...
Purge des fichiers de configuration de zram-config (0.5) ...
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo update-initramfs -u -k all && sudo update-grub
update-initramfs: Generating /boot/initrd.img-4.13.0-38-generic
update-initramfs: Generating /boot/initrd.img-4.13.0-37-generic
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.13.0-38-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.13.0-38-generic
Image Linux trouvée : /boot/vmlinuz-4.13.0-37-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.13.0-37-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait

Merci ... Je vais redémarrer l'ordi...


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#59 Le 22/04/2018, à 20:35

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Non Naziel, ça ne change rien du tout ... (merci quand même)

Je trouve que l'écran noir dure pas mal de temps au début...


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#60 Le 22/04/2018, à 20:40

moko138

Re : "the system is running low card graphics" ? [non résolu]

Si tu as redémarré, montre

dmesg

Merci !


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#61 Le 22/04/2018, à 21:46

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Merci moko138

Voilà la réponse :

pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[    0.000000] Linux version 4.13.0-38-generic (buildd@lgw01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #43~16.04.1-Ubuntu SMP Wed Mar 14 17:48:43 UTC 2018 (Ubuntu 4.13.0-38.43~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=c29a43e6-5257-4ca4-98e2-65ee66e0f54b ro quiet splash zswap.enabled=1 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbaa9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cbaaa000-0x00000000cbab0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cbab1000-0x00000000cc195fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc196000-0x00000000cc3e1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc3e2000-0x00000000db448fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db449000-0x00000000db4d2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db4d3000-0x00000000db5edfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db5ee000-0x00000000dba1ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dba20000-0x00000000dbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. CR61 2M/CX61 2OC/CX61 2OD/MS-16GD, BIOS E16GDIMS.20I 11/10/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 011FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 4046M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ffff890c000fd760]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff890c00097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x20b2c000, 0x20b2cfff] PGTABLE
[    0.000000] BRK [0x20b2d000, 0x20b2dfff] PGTABLE
[    0.000000] BRK [0x20b2e000, 0x20b2efff] PGTABLE
[    0.000000] BRK [0x20b2f000, 0x20b2ffff] PGTABLE
[    0.000000] BRK [0x20b30000, 0x20b30fff] PGTABLE
[    0.000000] BRK [0x20b31000, 0x20b31fff] PGTABLE
[    0.000000] BRK [0x20b32000, 0x20b32fff] PGTABLE
[    0.000000] BRK [0x20b33000, 0x20b33fff] PGTABLE
[    0.000000] BRK [0x20b34000, 0x20b34fff] PGTABLE
[    0.000000] BRK [0x20b35000, 0x20b35fff] PGTABLE
[    0.000000] BRK [0x20b36000, 0x20b36fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x321b2000-0x350d0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000DB9F2088 000094 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DBA011E8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DB9F21B8 00F02E (v02 MSI_NB MEGABOOK 00000014 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DBA1E080 000040
[    0.000000] ACPI: APIC 0x00000000DBA012F8 000062 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DBA01360 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000DBA013A8 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DBA01408 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
[    0.000000] ACPI: SLIC 0x00000000DBA01630 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DBA017A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DBA01CE8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000DBA027C0 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DBA02800 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DBA02838 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DBA02B50 003562 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DBA060B8 001342 (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: MSFF 0x00000000DBA07400 000029 (v01 MSI_NB MEGABOOK 00000010 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fdd5000-0x11fdfffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cbaa9fff]
[    0.000000]   node   0: [mem 0x00000000cbab1000-0x00000000cc195fff]
[    0.000000]   node   0: [mem 0x00000000cc3e2000-0x00000000db448fff]
[    0.000000]   node   0: [mem 0x00000000db4d3000-0x00000000db5edfff]
[    0.000000]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.000000] On node 0 totalpages: 1028270
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13965 pages used for memmap
[    0.000000]   DMA32 zone: 893714 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcbaaa000-0xcbab0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc196000-0xcc3e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb449000-0xdb4d2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb5ee000-0xdba1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdba20000-0xdbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff890d1fa00000 s146520 r8192 d29608 u1048576
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012180
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=c29a43e6-5257-4ca4-98e2-65ee66e0f54b ro quiet splash zswap.enabled=1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3906792K/4113080K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2368K init, 2372K bss, 206288K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37844 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.663 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.32 BogoMIPS (lpj=9578652)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.016592] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.016615] Security Framework initialized
[    0.016616] Yama: becoming mindful.
[    0.016633] AppArmor: AppArmor initialized
[    0.017457] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017903] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017927] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.017941] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.018126] CPU: Physical Processor ID: 0
[    0.018127] CPU: Processor Core ID: 0
[    0.018132] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018133] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018134] FEATURE SPEC_CTRL Present
[    0.018137] mce: CPU supports 7 MCE banks
[    0.018145] CPU0: Thermal monitoring enabled (TM1)
[    0.018155] process: using mwait in idle threads
[    0.018158] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.018159] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.018160] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.018161] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.018162] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.018268] Freeing SMP alternatives memory: 36K
[    0.020067] smpboot: Max logical packages: 1
[    0.020481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061595] TSC deadline timer enabled
[    0.061597] smpboot: CPU0: Intel(R) Pentium(R) CPU 3560M @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.061653] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.061696] ... version:                3
[    0.061696] ... bit width:              48
[    0.061697] ... generic registers:      8
[    0.061698] ... value mask:             0000ffffffffffff
[    0.061698] ... max period:             00007fffffffffff
[    0.061699] ... fixed-purpose events:   3
[    0.061699] ... event mask:             00000007000000ff
[    0.061731] Hierarchical SRCU implementation.
[    0.062476] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.062491] smp: Bringing up secondary CPUs ...
[    0.062558] x86: Booting SMP configuration:
[    0.062559] .... node  #0, CPUs:      #1
[    0.064000] smp: Brought up 1 node, 2 CPUs
[    0.064000] smpboot: Total of 2 processors activated (9578.65 BogoMIPS)
[    0.064000] devtmpfs: initialized
[    0.064000] x86/mm: Memory block size: 128MB
[    0.064000] evm: security.selinux
[    0.064000] evm: security.SMACK64
[    0.064000] evm: security.SMACK64EXEC
[    0.064000] evm: security.SMACK64TRANSMUTE
[    0.064000] evm: security.SMACK64MMAP
[    0.064000] evm: security.ima
[    0.064000] evm: security.capability
[    0.064025] PM: Registering ACPI NVS region [mem 0xcbaaa000-0xcbab0fff] (28672 bytes)
[    0.064026] PM: Registering ACPI NVS region [mem 0xdb5ee000-0xdba1ffff] (4399104 bytes)
[    0.064116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064121] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.064167] pinctrl core: initialized pinctrl subsystem
[    0.064247] RTC time: 19:32:02, date: 04/22/18
[    0.064316] NET: Registered protocol family 16
[    0.064464] cpuidle: using governor ladder
[    0.064464] cpuidle: using governor menu
[    0.064464] PCCT header not found.
[    0.064464] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.064464] ACPI: bus type PCI registered
[    0.064464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064464] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.064464] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.064464] PCI: Using configuration type 1 for base access
[    0.064464] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.064464] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.065062] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.065062] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065062] ACPI: Added _OSI(Module Device)
[    0.065062] ACPI: Added _OSI(Processor Device)
[    0.065062] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065062] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065062] ACPI: Executed 1 blocks of module-level executable AML code
[    0.069224] ACPI Error: No handler for Region [EC__] (ffff890d1b14ee58) [EmbeddedControl] (20170531/evregion-166)
[    0.069230] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170531/exfldio-299)
[    0.069235] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC._REG, AE_NOT_EXIST (20170531/psparse-550)
[    0.070204] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.070966] ACPI: Dynamic OEM Table Load:
[    0.070971] ACPI: SSDT 0xFFFF890D1A5F9000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.072250] ACPI: Dynamic OEM Table Load:
[    0.072255] ACPI: SSDT 0xFFFF890D1A482000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.072636] ACPI: Dynamic OEM Table Load:
[    0.072639] ACPI: SSDT 0xFFFF890D1A61B200 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.073118] ACPI: EC: EC started
[    0.073119] ACPI: EC: interrupt blocked
[    0.074919] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.074921] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.074923] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.074923] ACPI: Interpreter enabled
[    0.074952] ACPI: (supports S0 S3 S4 S5)
[    0.074953] ACPI: Using IOAPIC for interrupt routing
[    0.074978] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.075278] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.088511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.088516] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.089000] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.089001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.089424] PCI host bridge to bus 0000:00
[    0.089427] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.089428] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.089431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.089433] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.089434] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.089435] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.089436] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.089438] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.089439] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.089440] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.089442] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.089450] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.089550] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.089586] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.089698] pci 0000:00:02.0: [8086:0406] type 00 class 0x030000
[    0.089709] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.089715] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.089719] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.089803] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.089812] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[    0.089924] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.089945] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.090003] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.090077] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.090099] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[    0.090160] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.090242] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.090263] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[    0.090342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.090418] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.090437] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.090504] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.090583] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.090659] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.090775] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.090850] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.090959] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.091027] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.091139] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.091160] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[    0.091241] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.091318] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.091491] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.091508] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.091515] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.091523] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.091530] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.091538] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.091545] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[    0.091580] pci 0000:00:1f.2: PME# supported from D3hot
[    0.091653] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.091671] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[    0.091690] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.091810] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.091868] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.092076] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[    0.092516] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit]
[    0.092563] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.093827] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104159] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.104163] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.104167] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.104244] pci 0000:04:00.0: [10ec:8723] type 00 class 0x028000
[    0.104277] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.104310] pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.104427] pci 0000:04:00.0: supports D1 D2
[    0.104429] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116033] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.116037] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.116040] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.117496] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.117543] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.117587] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.117630] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.117675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.117720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.117764] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.117807] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.118013] ACPI: EC: interrupt unblocked
[    0.118018] ACPI: EC: event unblocked
[    0.118025] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.118026] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.118230] SCSI subsystem initialized
[    0.118259] libata version 3.00 loaded.
[    0.118259] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.118259] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.118259] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.118259] vgaarb: loaded
[    0.118259] ACPI: bus type USB registered
[    0.118259] usbcore: registered new interface driver usbfs
[    0.118259] usbcore: registered new interface driver hub
[    0.118259] usbcore: registered new device driver usb
[    0.118259] EDAC MC: Ver: 3.0.0
[    0.118259] PCI: Using ACPI for IRQ routing
[    0.118259] PCI: pci_cache_line_size set to 64 bytes
[    0.118259] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.118259] e820: reserve RAM buffer [mem 0xcbaaa000-0xcbffffff]
[    0.118259] e820: reserve RAM buffer [mem 0xcc196000-0xcfffffff]
[    0.120003] e820: reserve RAM buffer [mem 0xdb449000-0xdbffffff]
[    0.120005] e820: reserve RAM buffer [mem 0xdb5ee000-0xdbffffff]
[    0.120006] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.120081] NetLabel: Initializing
[    0.120081] NetLabel:  domain hash size = 128
[    0.120082] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.120096] NetLabel:  unlabeled traffic allowed by default
[    0.120109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.120109] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.122073] clocksource: Switched to clocksource hpet
[    0.129154] VFS: Disk quotas dquot_6.6.0
[    0.129175] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.129268] AppArmor: AppArmor Filesystem Enabled
[    0.129313] pnp: PnP ACPI init
[    0.129427] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.129431] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.129596] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.129598] system 00:01: [io  0xffff] has been reserved
[    0.129599] system 00:01: [io  0xffff] has been reserved
[    0.129601] system 00:01: [io  0xffff] has been reserved
[    0.129603] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.129604] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.129606] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.129607] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.129609] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.129610] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.129613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129633] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.129676] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.129678] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.129721] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.129722] system 00:04: [io  0x034c-0x034f] has been reserved
[    0.129725] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130175] pnp 00:05: Plug and Play ACPI device, IDs PNP030b (active)
[    0.130211] pnp 00:06: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.130677] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.130678] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.130680] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.130681] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.130683] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.130684] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.130687] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.130689] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.130690] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.130692] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.130694] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.130695] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.130698] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130909] pnp: PnP ACPI: found 8 devices
[    0.137020] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.137038] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.137040] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.137042] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.137063] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.137070] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.137072] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.137074] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.137081] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.137084] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.137089] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.137092] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.137098] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.137101] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.137106] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.137114] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.137116] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.137121] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.137129] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.137131] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.137132] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.137134] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.137135] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.137136] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.137137] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.137139] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.137140] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.137141] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.137143] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.137144] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.137146] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.137147] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.137148] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.137150] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.137151] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.137288] NET: Registered protocol family 2
[    0.137418] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.137479] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.137572] TCP: Hash tables configured (established 32768 bind 32768)
[    0.137600] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.137615] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.137656] NET: Registered protocol family 1
[    0.137669] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.180101] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.180144] PCI: CLS 64 bytes, default 64
[    0.180179] Unpacking initramfs...
[    0.888878] Freeing initrd memory: 48252K
[    0.888897] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.888900] software IO TLB [mem 0xd7449000-0xdb449000] (64MB) mapped at [ffff890cd7449000-ffff890cdb448fff]
[    0.889035] Scanning for low memory corruption every 60 seconds
[    0.889297] audit: initializing netlink subsys (disabled)
[    0.889335] audit: type=2000 audit(1524425522.889:1): state=initialized audit_enabled=0 res=1
[    0.889647] Initialise system trusted keyrings
[    0.889656] Key type blacklist registered
[    0.889684] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.890692] zbud: loaded
[    0.891126] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.891251] fuse init (API version 7.26)
[    0.892437] Key type asymmetric registered
[    0.892438] Asymmetric key parser 'x509' registered
[    0.892464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.892490] io scheduler noop registered
[    0.892491] io scheduler deadline registered
[    0.892511] io scheduler cfq registered (default)
[    0.893221] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.893238] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.893257] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.893274] pcieport 0000:00:1c.5: Signaling PME with IRQ 27
[    0.893292] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.893362] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.893362] vesafb: scrolling: redraw
[    0.893364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.893375] vesafb: framebuffer at 0xe0000000, mapped to 0xffffa3db41000000, using 4160k, total 4160k
[    0.893447] Console: switching to colour frame buffer device 170x48
[    0.893463] fb0: VESA VGA frame buffer device
[    0.893473] intel_idle: MWAIT substates: 0x42120
[    0.893474] intel_idle: v0.4.1 model 0x3C
[    0.893536] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.893818] ACPI: AC Adapter [ADP1] (on-line)
[    0.894067] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.894342] ACPI: Lid Switch [LID0]
[    0.894404] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.894412] ACPI: Power Button [PWRB]
[    0.894439] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.894445] ACPI: Sleep Button [SLPB]
[    0.894471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.894553] ACPI: Power Button [PWRF]
[    0.895172] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.895464] thermal LNXTHERM:00: registered as thermal_zone0
[    0.895465] ACPI: Thermal Zone [THRM] (54 C)
[    0.895502] GHES: HEST is not enabled!
[    0.895625] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.897073] Linux agpgart interface v0.103
[    0.898171] loop: module loaded
[    0.898310] libphy: Fixed MDIO Bus: probed
[    0.898311] tun: Universal TUN/TAP device driver, 1.6
[    0.898337] PPP generic driver version 2.4.2
[    0.898376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.898377] ehci-pci: EHCI PCI platform driver
[    0.898488] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.898493] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.898507] ehci-pci 0000:00:1a.0: debug port 2
[    0.902399] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.902409] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
[    0.916055] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.916093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.916094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.916096] usb usb1: Product: EHCI Host Controller
[    0.916097] usb usb1: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.916098] usb usb1: SerialNumber: 0000:00:1a.0
[    0.916237] hub 1-0:1.0: USB hub found
[    0.916242] hub 1-0:1.0: 2 ports detected
[    0.916469] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.916474] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.916485] ehci-pci 0000:00:1d.0: debug port 2
[    0.920376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.920386] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[    0.936070] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.936119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.936120] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.936122] usb usb2: Product: EHCI Host Controller
[    0.936123] usb usb2: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.936124] usb usb2: SerialNumber: 0000:00:1d.0
[    0.936325] hub 2-0:1.0: USB hub found
[    0.936330] hub 2-0:1.0: 2 ports detected
[    0.936446] ehci-platform: EHCI generic platform driver
[    0.936461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.936464] ohci-pci: OHCI PCI platform driver
[    0.936472] ohci-platform: OHCI generic platform driver
[    0.936477] uhci_hcd: USB Universal Host Controller Interface driver
[    0.936610] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.936615] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.937696] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.937701] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.937779] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.937780] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.937782] usb usb3: Product: xHCI Host Controller
[    0.937783] usb usb3: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.937784] usb usb3: SerialNumber: 0000:00:14.0
[    0.937952] hub 3-0:1.0: USB hub found
[    0.937969] hub 3-0:1.0: 14 ports detected
[    0.939898] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.939902] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.939934] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.939935] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.939937] usb usb4: Product: xHCI Host Controller
[    0.939938] usb usb4: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.939939] usb usb4: SerialNumber: 0000:00:14.0
[    0.940121] hub 4-0:1.0: USB hub found
[    0.940132] hub 4-0:1.0: 4 ports detected
[    0.940484] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.960225] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.960228] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.960492] mousedev: PS/2 mouse device common for all mice
[    0.961004] rtc_cmos 00:02: RTC can wake from S4
[    0.961116] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.961139] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.961145] i2c /dev entries driver
[    0.961187] device-mapper: uevent: version 1.0.3
[    0.961257] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.961261] intel_pstate: Intel P-state driver initializing
[    0.961359] ledtrig-cpu: registered to indicate activity on CPUs
[    0.961681] NET: Registered protocol family 10
[    0.965351] Segment Routing with IPv6
[    0.965370] NET: Registered protocol family 17
[    0.965379] Key type dns_resolver registered
[    0.965540] RAS: Correctable Errors collector initialized.
[    0.965568] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    0.965614] microcode: Microcode Update Driver: v2.2.
[    0.965662] sched_clock: Marking stable (965610953, 0)->(963366668, 2244285)
[    0.965832] registered taskstats version 1
[    0.965839] Loading compiled-in X.509 certificates
[    0.968175] Loaded X.509 cert 'Build time autogenerated kernel key: 7e2286d9a4c044101e0c6ffeb6c3945a9a549eb6'
[    0.968194] zswap: loaded using pool lzo/zbud
[    0.971908] Key type big_key registered
[    0.971911] Key type trusted registered
[    0.973450] Key type encrypted registered
[    0.973452] AppArmor: AppArmor sha1 policy hashing enabled
[    0.973455] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.973474] evm: HMAC attrs: 0x1
[    0.974006]   Magic number: 14:135:547
[    0.974023] tty ttyS23: hash matches
[    0.974122] rtc_cmos 00:02: setting system clock to 2018-04-22 19:32:03 UTC (1524425523)
[    0.974169] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.974170] EDD information not available.
[    0.974213] PM: Hibernation image not present or could not be loaded.
[    0.980954] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.004135] ACPI: Battery Slot [BAT1] (battery present)
[    1.006081] Freeing unused kernel memory: 2368K
[    1.006082] Write protecting the kernel read-only data: 18432k
[    1.006557] Freeing unused kernel memory: 2024K
[    1.006762] Freeing unused kernel memory: 88K
[    1.008558] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.008559] x86/mm: Checking user space page tables
[    1.010234] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.067343] hidraw: raw HID events driver (C) Jiri Kosina
[    1.110349] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:82:e9:d9]
[    1.113579] ahci 0000:00:1f.2: version 3.0
[    1.113773] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    1.113776] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.115197] sdhci: Secure Digital Host Controller Interface driver
[    1.115198] sdhci: Copyright(c) Pierre Ossman
[    1.131301] scsi host0: ahci
[    1.131600] scsi host1: ahci
[    1.132148] scsi host2: ahci
[    1.133524] scsi host3: ahci
[    1.133692] scsi host4: ahci
[    1.133734] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 29
[    1.133736] ata2: DUMMY
[    1.133736] ata3: DUMMY
[    1.133737] ata4: DUMMY
[    1.133739] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 29
[    1.134291] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.166773] [drm] Memory usable by graphics device = 2048M
[    1.166776] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    1.166776] fb: switching to inteldrmfb from VESA VGA
[    1.166800] Console: switching to colour dummy device 80x25
[    1.166871] [drm] Replacing VGA console driver
[    1.172072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.172073] [drm] Driver supports precise vblank timestamp query.
[    1.174751] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.183317] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    1.184708] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.185176] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.220175] fbcon: inteldrmfb (fb0) is primary device
[    1.220232] Console: switching to colour frame buffer device 170x48
[    1.220249] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.244029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.264056] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[    1.264075] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.392773] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.392776] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.393090] hub 1-1:1.0: USB hub found
[    1.393179] hub 1-1:1.0: 6 ports detected
[    1.412456] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.412459] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.412709] hub 2-1:1.0: USB hub found
[    1.412788] hub 2-1:1.0: 8 ports detected
[    1.444521] usb 3-5: New USB device found, idVendor=5986, idProduct=014c
[    1.444523] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.444525] usb 3-5: Product: BisonCam, NB Pro
[    1.444526] usb 3-5: Manufacturer: Bison
[    1.447426] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.447444] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.447983] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.447990] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.448163] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.448165] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.448671] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.448678] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.448858] ata5.00: configured for UDMA/133
[    1.451251] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TM00, max UDMA/100
[    1.453883] ata1.00: configured for UDMA/100
[    1.462463] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TM00 PQ: 0 ANSI: 5
[    1.498267] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.498269] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.498382] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.498447] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.498568] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.524191] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.524217] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.524219] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.524228] sd 4:0:0:0: [sda] Write Protect is off
[    1.524229] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524242] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.567995] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.580841]  sda: sda1 sda2 < sda5 >
[    1.581423] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.713088] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    1.713090] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.713091] usb 3-7: Product: RT Bluetooth Radio
[    1.713093] usb 3-7: Manufacturer: Realtek
[    1.713094] usb 3-7: SerialNumber: 00e04c000001
[    1.916002] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[    1.916009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
[    2.146032] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    2.169916] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.192189] psmouse serio1: elantech: Elan sample query result 00, 5a, 96
[    2.303828] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.940131] clocksource: Switched to clocksource tsc
[    7.292178] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.598098] random: crng init done
[    8.813019] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.832099] systemd[1]: Detected architecture x86-64.
[    8.855533] systemd[1]: Set hostname to <pierre-CR61-2M-CX61-2OC-CX61-2OD>.
[   10.252079] systemd[1]: Created slice User and Session Slice.
[   10.252144] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.252267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.252314] systemd[1]: Listening on Journal Socket.
[   10.252329] systemd[1]: Reached target User and Group Name Lookups.
[   10.252367] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.252409] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[   20.473726] lp: driver loaded but no devices found
[   20.516626] ppdev: user-space parallel port driver
[   20.560647] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.696130] systemd-journald[238]: Received request to flush runtime journal from PID 1
[   20.960436] EDAC ie31200: No ECC support
[   20.961142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.025681] Bluetooth: Core ver 2.22
[   21.025694] NET: Registered protocol family 31
[   21.025695] Bluetooth: HCI device and connection manager initialized
[   21.025698] Bluetooth: HCI socket layer initialized
[   21.025700] Bluetooth: L2CAP socket layer initialized
[   21.025706] Bluetooth: SCO socket layer initialized
[   21.027367] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   21.045515] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   21.045517] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   21.045519] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   21.045520] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   21.045521] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   21.045523] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[   21.045524] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   21.052699] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[   21.052741] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[   21.056106] usbcore: registered new interface driver btusb
[   21.057553] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[   21.057555] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[   21.063880] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
[   21.063886] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.063889] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   21.063892] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   21.063895] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.063896] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   21.063899] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   21.063902] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   21.063905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.063905] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   21.063908] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   21.063911] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   21.063914] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.063914] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   21.108038] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   21.112586] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   21.112791] rtlwifi: rtlwifi: wireless switch is on
[   21.155623] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   21.155625] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   21.155625] RAPL PMU: hw unit of domain package 2^-14 Joules
[   21.155626] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   21.155627] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   21.189675] intel_rapl: Found RAPL domain package
[   21.189677] intel_rapl: Found RAPL domain core
[   21.189678] intel_rapl: Found RAPL domain uncore
[   21.189679] intel_rapl: Found RAPL domain dram
[   21.189681] intel_rapl: RAPL package 0 domain package locked by BIOS
[   21.189685] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   21.372839] input: MSI WMI hotkeys as /devices/virtual/input/input10
[   21.379376] audit: type=1400 audit(1524425543.905:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=534 comm="apparmor_parser"
[   21.379380] audit: type=1400 audit(1524425543.905:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
[   21.379382] audit: type=1400 audit(1524425543.905:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=534 comm="apparmor_parser"
[   21.379383] audit: type=1400 audit(1524425543.905:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
[   21.379760] audit: type=1400 audit(1524425543.905:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=533 comm="apparmor_parser"
[   21.379763] audit: type=1400 audit(1524425543.905:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=533 comm="apparmor_parser"
[   21.390200] audit: type=1400 audit(1524425543.916:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=536 comm="apparmor_parser"
[   21.390204] audit: type=1400 audit(1524425543.916:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=536 comm="apparmor_parser"
[   21.390206] audit: type=1400 audit(1524425543.916:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=536 comm="apparmor_parser"
[   21.390208] audit: type=1400 audit(1524425543.916:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=536 comm="apparmor_parser"
[   21.529512] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   21.529555] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   21.529591] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   21.529628] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   21.529665] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   21.579181] media: Linux media interface: v0.10
[   21.584691] Linux video capture interface: v2.00
[   21.592927] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:014c)
[   21.596954] uvcvideo 3-5:1.0: Entity type for entity Processing 2 was not initialized!
[   21.596956] uvcvideo 3-5:1.0: Entity type for entity Extension 6 was not initialized!
[   21.596957] uvcvideo 3-5:1.0: Entity type for entity Camera 1 was not initialized!
[   21.597017] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input16
[   21.597064] usbcore: registered new interface driver uvcvideo
[   21.597065] USB Video Class driver (1.1.1)
[   22.172015] rtl8723ae 0000:04:00.0 wlp4s0: renamed from wlan0
[   23.657869] Adding 4111356k swap on /dev/sda5.  Priority:-1 extents:1 across:4111356k FS
[   24.147237] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.147238] Bluetooth: BNEP filters: protocol multicast
[   24.147241] Bluetooth: BNEP socket layer initialized
[   28.910599] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   29.333912] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   29.347308] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   29.353074] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   29.787484] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   49.102073] Bluetooth: RFCOMM TTY layer initialized
[   49.102078] Bluetooth: RFCOMM socket layer initialized
[   49.102082] Bluetooth: RFCOMM ver 1.11
[   74.205086] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   76.729091] wlp4s0: authenticate with 3e:f6:4b:3f:7e:58
[   76.762198] wlp4s0: send auth to 3e:f6:4b:3f:7e:58 (try 1/3)
[   76.767854] wlp4s0: authenticated
[   76.771947] wlp4s0: associate with 3e:f6:4b:3f:7e:58 (try 1/3)
[   76.780857] wlp4s0: RX AssocResp from 3e:f6:4b:3f:7e:58 (capab=0x411 status=0 aid=1)
[   76.781052] wlp4s0: associated
[   76.781084] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

Faudra me dire comment vous faites pour vous y retrouver dans un charabia pareil ... sad

Dernière modification par arzavapi (Le 22/04/2018, à 21:47)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#62 Le 23/04/2018, à 06:11

moko138

Re : "the system is running low card graphics" ? [non résolu]

Ce n'était pas le but dans ce fil, mais entre ton message #39

[  100.989565] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

et le dernier

[   76.781084] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

tu as gagné 25 secondes sur la disponibilité de la wifi au démarrage.

AJOUT :
Et pour ta carte à problèmes {wifi+bluetooth},
merci de répondre là ./viewtopic.php?pid=21826196#p21826196
                FIN d'ajout
  - -

En #45, tu as :

~$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.00*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
(...)
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)

Utilises-tu plus d'un écran sur ton portable ?

Merci de toujours appliquer ce que t'a dit Korak.
Et redonne :

sudo lshw -c display

Dernière modification par moko138 (Le 23/04/2018, à 06:21)


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#63 Le 23/04/2018, à 16:04

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonjour

Réponse :

sudo lshw -c display
~$ sudo lshw -c display
[sudo] Mot de passe de pierre : 
  *-display               
       description: VGA compatible controller
       produit: 4th Gen Core Processor Integrated Graphics Controller
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 06
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       ressources: irq:30 mémoire:f7800000-f7bfffff mémoire:e0000000-efffffff portE/S:f000(taille=64) mémoire:c0000-dffff

Merci pour votre aide.
En ce qui concerne Korak, je n'avais pas aimé sa remarque que je trouve excessive et violente.

Je vais dire que j'ai 61 ans et que j'y connais presque rien en langage informatique... Ou si peu.
Je fais ce que je peux.

J'aurais aimé dire à Korak que je suis un spécialiste des plantes sauvages (ce qui est vrai) et que je peux me débrouiller tout seul dans la nature pendant au moins une quinzaine de jours sans rencontrer personne, que ferait-il dans ce cas ?... Nous ne parlons pas sans doute tous le même langage.


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#64 Le 23/04/2018, à 19:44

moko138

Re : "the system is running low card graphics" ? [non résolu]

Nous avons tous nos points forts et nos points faibles, donc tous nous alternons les rôles de l'aveugle et du paralytique.
En l'espèce, Korak, excellent paralytique,  t'a donné un conseil particulièrement pertinent (*), et je te prie de ne pas prendre ombrage que sa forme (du moins la deuxième fois) n'ait pas été peaufinée par le Quai d'Orsay.


___
(*)  conseil qui t'évite de te farcir toutes les explications dans ce message-ci : Retour utilisable de commande.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#65 Le 23/04/2018, à 20:42

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Merci de ces remarques pertinentes...

J'ai compris le sens de "Quai d'Orsay"...

Quoi qu'il en soit je fais quoi, maintenant ? Je laisse cette alerte "you system is running low card graphics" , et me contenter de faire quelques clics pour démarrer normalement ??? sad


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#66 Le 23/04/2018, à 20:46

xubu1957

Re : "the system is running low card graphics" ? [non résolu]

Bonjour,

Dans le post #62, moko138 a écrit :

(...)
Utilises-tu plus d'un écran sur ton portable ?
(...)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#67 Le 23/04/2018, à 22:27

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Non. J'utilise l'écran de mon portable...


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#68 Le 23/04/2018, à 22:27

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Non. J'utilise seulement l'écran de mon portable...

Dernière modification par arzavapi (Le 23/04/2018, à 22:28)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#69 Le 23/04/2018, à 22:34

xubu1957

Re : "the system is running low card graphics" ? [non résolu]

Il vient d'y avoir un lâcher de noyaux > UbuntuUpdates.

Fais la mise à jour :

sudo apt update
sudo apt full-upgrade

et après redémarrage, dis nous si l'anomalie persiste.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#70 Le 24/04/2018, à 01:05

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

~$ sudo apt update
[sudo] Mot de passe de pierre : 
Atteint:1 http://fr.archive.ubuntu.com/ubuntu xenial InRelease
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
Atteint:3 http://archive.canonical.com/ubuntu xenial InRelease                 
Réception de:4 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Atteint:5 http://ppa.launchpad.net/costales/folder-color/ubuntu xenial InRelease
Ign:6 http://dl.google.com/linux/chrome/deb stable InRelease                   
Atteint:7 http://ppa.launchpad.net/libreoffice/ppa/ubuntu xenial InRelease     
Atteint:8 http://dl.google.com/linux/chrome/deb stable Release                 
Réception de:9 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]
Réception de:10 http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu xenial InRelease [23,8 kB]
Atteint:11 http://ppa.launchpad.net/noobslab/apps/ubuntu xenial InRelease      
Atteint:12 http://ppa.launchpad.net/pipelight/stable/ubuntu xenial InRelease
Atteint:13 http://ppa.launchpad.net/videolan/stable-daily/ubuntu xenial InRelease
Réception de:15 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [765 kB]
Réception de:16 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [481 kB]
Atteint:17 https://repo.skype.com/deb stable InRelease                         
Réception de:18 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [706 kB]
Réception de:19 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [430 kB]
Réception de:20 http://security.ubuntu.com/ubuntu xenial-security/main amd64 DEP-11 Metadata [67,4 kB]
Réception de:21 http://security.ubuntu.com/ubuntu xenial-security/main DEP-11 64x64 Icons [77,2 kB]
Réception de:22 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [343 kB]
Réception de:23 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [298 kB]
Réception de:24 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 DEP-11 Metadata [107 kB]
Réception de:25 http://security.ubuntu.com/ubuntu xenial-security/universe DEP-11 64x64 Icons [147 kB]
Réception de:26 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 DEP-11 Metadata [319 kB]
Réception de:27 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main DEP-11 64x64 Icons [237 kB]
Réception de:28 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [623 kB]
Réception de:29 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [574 kB]
Réception de:30 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 DEP-11 Metadata [242 kB]
Réception de:31 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe DEP-11 64x64 Icons [322 kB]
Réception de:32 http://fr.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 DEP-11 Metadata [5 972 B]
Réception de:33 http://fr.archive.ubuntu.com/ubuntu xenial-backports/main amd64 DEP-11 Metadata [3 328 B]
Réception de:34 http://fr.archive.ubuntu.com/ubuntu xenial-backports/universe amd64 DEP-11 Metadata [5 088 B]
6 084 ko réceptionnés en 7s (789 ko/s)                                         
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo apt full-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ 

Je vais redémarrer avec un "

sudo reboot

...
L'anomalie ne va pas se représenter. Le redémarrage fonctionnera normalement.

J'ai remarqué que lorsque j'éteins mon ordi totalement. Et que je le rallume l'anomalie (avec cette alerte) se représente.
J'en reparle demain 25 avril smile
Merci smile

Dernière modification par arzavapi (Le 24/04/2018, à 01:11)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#71 Le 24/04/2018, à 06:29

xubu1957

Re : "the system is running low card graphics" ? [non résolu]

Bonjour,

@ Naziel

Du fait que le pilote wifi est un RTL8723BEAE, cela pourrait-il influer dans l'anomalie ?

Pour info > Wifi : Wireless LAN Soft blocked: no Hard blocked: no ? (Résolu), un paramétrage possible sur MSI.

Dernier point modprobe > micro-coupures wifi ???
_ _ _

@ arzavapi

Fournis :

uname -a
dmesg | grep rtl

Dernière modification par xubu1957 (Le 01/05/2018, à 11:56)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#72 Le 24/04/2018, à 07:18

moko138

Re : "the system is running low card graphics" ? [non résolu]

arzavapi a écrit :

Je vais redémarrer avec un "

sudo reboot

...
L'anomalie ne va pas se représenter. Le redémarrage fonctionnera normalement.

J'ai remarqué que lorsque j'éteins mon ordi totalement. Et que je le rallume l'anomalie (avec cette alerte) se représente.

Depuis quand y a-t-il cette différence
entre redémarrage --> affichage correct
et         démarrage --> affichage incorrect ?


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#73 Le 24/04/2018, à 07:27

youssoufB

Re : "the system is running low card graphics" ? [non résolu]

Petit problème après des updates par Guy19550
Le post est similaire avec un problème d’accès à la dri. le point est que c'est un processeur AMD FM2 (avec chipset graphique intégré).
Je ne sait pas pour le wifi ?


mail et moteur de recherche: Lilo

Hors ligne

#74 Le 24/04/2018, à 07:58

xubu1957

Re : "the system is running low card graphics" ? [non résolu]

youssoufB a écrit :

Petit problème après des updates par Guy19550
Le post est similaire avec un problème d’accès à la dri. le point est que c'est un processeur AMD FM2 (avec chipset graphique intégré).
Je ne sait pas pour le wifi ?

Guy19550 aurait-il aussi un pilote RTL8723BE > RTL8723BE aucun wifi détecté ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#75 Le 24/04/2018, à 08:50

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonjour xubu1957

J'ai démarré normalement (sans aucun signe d'alerte ce matin)...

Voici les écritures au commandes demandées

~$ uname -a
Linux pierre-CR61-2M-CX61-2OC-CX61-2OD 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dmesg | grep rtl
[   18.710218] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[   18.710220] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[   19.473469] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   19.554530] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   19.554722] rtlwifi: rtlwifi: wireless switch is on
[   22.056213] rtl8723ae 0000:04:00.0 wlp4s0: renamed from wlan0

Etant méfiant de nature, je vais voir -puisque je vais éteindre mon ordi maintenant, et en l'ouvrant ultérieurement dans la journée- si cela se perpétue.
Alors je passerai en "résolu"

Merci vraiment pour tout.
Sincèrément smile


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne