fonctionner disque dur externe

thom83 · Le 20/12/2006, à 14:29

Est-ce qu'un «lsusb» (sans les guillemets) dans un terminal donne quelque chose. Chez moi

14:25 thom@thom-desktop ~% lsusb

Bus 005 Device 003: ID 04cf:8818 Myson Century, Inc. Fast 3.5" External Storage
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

la ligne supérieure n'existe que si le disque usb est alimenté.

CasseTaTele · Le 20/12/2006, à 14:45

Il a déjà répondu à la question, cf post #54 !

thom83 · Le 20/12/2006, à 14:53

Exact. Et l'ID correspond bien à çà
http://www.qbik.ch/usb/devices/showdescr.php?id=2090

CasseTaTele · Le 20/12/2006, à 15:06

Device descriptor for Archos miniHD 6giga USB-PCMCIA-Firewire
umm si ça se trouve il est branché en firewire et pas en usb,

@BOURGOIS
Peux tu regarder le cable avec lequel tu branche ton disque ?
Est-ce que la prise du coté PC ressemble plutot à ça :
http://www.dpreview.com/news/9908/firewire.jpg (prise firewire)
ou à ça :
http://www.nullmodem.com/images/usb-cables.gif (prise usb)

la prise usb est symétrique alors que la prise firewire possède un coté en forme triangulaire et un coté carré,
est-ce que ta prise est firewire ou usb ?

thom83 · Le 20/12/2006, à 16:26

La commande lsusb peut-elle apparaitre un périphérique USB. Ne serait-il pas judicieux, si c'est bien de l'usb, de lancer dans un terminal

cat /proc/bus/usb/devices

avec et sans alimentation, ce qui donnerait quelque chose comme (c'est une partie de la sortie)

T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0457 ProdID=0151 Rev= 1.00
S: Product=USB Mass Storage Device
S: SerialNumber=0000000000034F
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=16ms

avec la ligne P: qui donne les réfétences du produit et la ligne C:* qui donne les besoins en courant.
Besoins qui sont nuls quand il y a une alimentation extérieure.

Dernière modification par thom83 (Le 20/12/2006, à 16:26)

BOURGOIS · Le 20/12/2006, à 18:04

bonsoir
je vien d'arriver et je suis passer au local faire la manoevre demandé
bourgois@bourgois-desktop:~$ sudo ps -ef | grep gnome-volume-manager
Password:
bourgois 4695 1 0 17:14 ? 00:00:00 gnome-volume-manager --sm-client-id default4
bourgois 4876 4773 0 17:18 pts/0 00:00:00 grep gnome-volume-manager
-------------------------------------------------------------------------
bourgois@bourgois-desktop:~$ sudo ps -ef grep gnome-volume-manager
ERROR: Process ID list syntax error.
********* simple selection ********* ********* selection by list *********
-A all processes -C by command name
-N negate selection -G by real group ID (supports names)
-a all w/ tty except session leaders -U by real user ID (supports names)
-d all except session leaders -g by session OR by effective group name
-e all processes -p by process ID
T all processes on this terminal -s processes in the sessions given
a all w/ tty, including other users -t by tty
g OBSOLETE -- DO NOT USE -u by effective user ID (supports names)
r only running processes U processes for specified users
x processes w/o controlling ttys t by tty
*********** output format ********** *********** long options ***********
-o,o user-defined -f full --Group --User --pid --cols --ppid
-j,j job control s signal --group --user --sid --rows --info
-O,O preloaded -o v virtual memory --cumulative --format --deselect
-l,l long u user-oriented --sort --tty --forest --version
-F extra full X registers --heading --no-heading --context
********* misc options *********
-V,V show version L list format codes f ASCII art forest
-m,m,-L,-T,H threads S children in sum -y change -l format
-M,Z security data c true command name -c scheduling class
-w,w wide output n numeric WCHAN,UID -H process hierarchy
------------------------------------------------------------------
bourgois@bourgois-desktop:~$ gnome-volume-manager
bourgois@bourgois-desktop:~$ sudo gnome-volume-manager
---------------------------------------------------------------------
bourgois@bourgois-desktop:~$ sudo apt-get install gnome-volume-manager
Password:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
gnome-volume-manager est déjà la plus récente version disponible.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
bourgois@bourgois-desktop:~$
--------------------------------------------------------------------
voila je fais effectuer le plus vite possible les derniers manoevres que tum'a indique
pour information c'est bien une partie de la prise
la premiere partie c'est bien la prise usb
la deuxieme partie celle qui va au disque dur ressemblerais a une petite prise parrallele
Amicalement

slasher_fun · Le 20/12/2006, à 18:12

bourgois@bourgois-desktop:~$ sudo ps -ef grep gnome-volume-manager

Il s'agissait de

sudo ps -ef | grep gnome-volume-manager

thom83 · Le 20/12/2006, à 18:23

Il a lancé la bonne commande au départ puis l'a relancée privée de la barre verticale. De toutes façon, il est acquis que gnome-volume-manager est installé. Il est également certain que le câble est usb, donc le disque aussi.

thom83 · Le 20/12/2006, à 18:33

Ce lien
http://linuxfr.org/forums/14/19466.html
montre qu'une alimentation insuffisante peut empêcher le fonctionnement d'un équipement Archos (bon, d'accord il ne s'agit pas du minihd, mais...).
Il vaut donc mieux utiliser le hub avec alimentation

thom83 · Le 20/12/2006, à 19:21

Au vu de la liste des modules présents chez BOURGOIS (#39), il n'y a pas les modules usb-storage et ehci_hcd. Je pense que cà ne mangerait pas de pain de faire dans un terminal un

sudo modprobe ehci_hcd
sudo modprobe usb-storage

Ensuite, il pourrait être fait ce que je proposais au #80 (surtout avec alimentation) pour vérifier si l'ajout de ces modules améliore la situation.
Si les deux modules ci-dessus n'apportent rien, ils ne seront pas rechargés au prochain démarrage (autrement non plus, d'ailleurs).

Dernière modification par thom83 (Le 21/12/2006, à 00:07)

BOURGOIS · Le 21/12/2006, à 10:20

bonjour
J’ai ajouté les deux manœuvres que tu m'avais indiqués
sudo modprobe ehci_hcd
sudo modprobe usb-storag
bourgois@bourgois-desktop:~$ cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0605 Rev= 6.0b
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms

T: Bus=01 Lev=02 Prnt=10 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=081a Rev= 1.09
S: Manufacturer=ARC
S: Product=USB Cable
S: SerialNumber=91548cf2-e8ad-11d3-a10d-808af0917545
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
--------------------------------------------------------------------------------------
Cela est pareille sur XP tant que le pilote n'ai pas installe
Pour la première fois nous avons les mêmes résultats que Xp – Ubuntu
Quand j'enlève le Hub et je branche le disque avec l’alimentation du hub
--------------------------------------------------------------------------------------
bourgois@bourgois-desktop:~$ cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=081a Rev= 1.09
S: Manufacturer=ARC
S: Product=USB Cable
S: SerialNumber=91548cf2-e8ad-11d3-a10d-808af0917545
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
---------------------------------------------------------------------------------------
J’ai rebranche le Hub
J’ai rajouté sur le Hub une clé USB reconnu de suite voici ce que donne
dmesg | tail -n 20
----------------------------------------------------------------------------------------
bourgois@bourgois-desktop:~$ dmesg | tail -n 20
[4298076.832000] usb 1-2.3: new full speed USB device using uhci_hcd and address 15
[4298076.928000] scsi0 : SCSI emulation for USB Mass Storage devices
[4298076.929000] usb-storage: device found at 15
[4298076.929000] usb-storage: waiting for device to settle before scanning
[4298081.934000] Vendor: Generic Model: USB Flash Disk Rev: 2.00
[4298081.934000] Type: Direct-Access ANSI SCSI revision: 02
[4298081.942000] usb-storage: device scan complete
[4298082.051000] Driver 'sd' needs updating - please use bus_type methods
[4298082.118000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4298082.122000] sda: Write Protect is off
[4298082.122000] sda: Mode Sense: 03 00 00 00
[4298082.122000] sda: assuming drive cache: write through
[4298082.139000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4298082.142000] sda: Write Protect is off
[4298082.142000] sda: Mode Sense: 03 00 00 00
[4298082.142000] sda: assuming drive cache: write through
[4298082.142000] sda: unknown partition table
[4298082.166000] sd 0:0:0:0: Attached scsi removable disk sda
[4298082.308000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4298082.996000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
quand penez vous
Amicalement

CasseTaTele · Le 21/12/2006, à 10:42

Bonjour,

il a trouvé le disque apparamment !! il porte le nom sda !

normalement si tu tapes dans un terminal :

ls /dev/sd*

(ls espace /dev/sd*)
tu devrais voir sda apparaitre,

Si c'est le cas, il ne reste plus qu'à le monter en le rajoutant au fichier fstab, pour cela tapes dans un terminal :

sudo gedit /etc/fstab

puis rajoute la ligne suivante :

/dev/sda1       /media/usbdisk      vfat    defaults,umask=0      0       0

ton fichier fstab doit etre comme ceci (peut importe l'ordre des lignes, mais normalement tu n'as pas de lignes supplémentaires) :

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hdb1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hdb5       none            swap    sw              0       0
/dev/sda1       /media/usbdisk  vfat    defaults,umask=0      0       0
/dev/hdd        /media/cdrom0   udf,iso9660 user,noauto     0       0

ensuite dans un terminal tu tapes :

sudo mount -a

et ton disque devrait etre visible dans le répertoire /media/usbdisk
tu peux vérifier en tapant :

ls /media/usbdisk

alors ça marche ?

thom83 · Le 21/12/2006, à 11:40

Bonjour à tous,
@CasseTaTele
Ne penses-tu pas que sda est plutôt la clé USB? Parce que 66 MB, çà me parait court pour un minihd de chez archos.
Je crois qu'il faudrait augmenter la longueur de message à afficher en lançant un

dmesg | tail -n 40

CasseTaTele · Le 21/12/2006, à 11:47

autant pour moi tu as raison, j'avais pas vu qu'il avait branché une clé usb ...
ouai on peut tenter ta commande mais je suis septique, faudrait peut etre essayer de faire des recherche sur google pour voir si on trouve des infos sur cet archos mini-hd...

thom83 · Le 21/12/2006, à 11:57

Il n'y a pas grand chose, malheureusement. J'ai essayé sans succès mais peut-être avec les mauvais mots.

thom83 · Le 21/12/2006, à 12:42

Le seul truc interressant, c'etait mon lien sous #78. Ça confirme tout de même que le disque est visible avec ou sans alimentation par le hub. Attendons le resultat de la commande

dmesg | tail -n 40

qui est à lancer, à mon avis, après avoir débranché et rebranché le minihd

BOURGOIS · Le 21/12/2006, à 12:46

bonjour
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hdb1 / ext3 defaults,errors=remount-ro 0 1
/dev/hdb5 none swap sw 0 0
/dev/hdc /media/usbdisk vfat user,noauto 0 0
/dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/hdc1 /media/hdc1 vfat user,noauto 0 0
/dev/sda1 /media/usbdisk vfat defaults,umask=0 0 0
-------------------------------------------------------------------------------------
bourgois@bourgois-desktop:~$ ls media/usbdisk
ls: media/usbdisk: Aucun fichier ou répertoire de ce type
bourgois@bourgois-desktop:~$
bourgois@bourgois-desktop:~$ ls /dev/hd*
/dev/hdb /dev/hdb1 /dev/hdb2 /dev/hdb5 /dev/hdc
------------------------------------------------------------------
bourgois@bourgois-desktop:~$ ls /media/usbdisk
-------------------------------------------------------------
bourgois@bourgois-desktop:~$ lsmod
Module Size Used by
ipv6 265600 6
rfcomm 40216 0
l2cap 26244 5 rfcomm
bluetooth 49892 4 rfcomm,l2cap
ppdev 9220 0
cpufreq_userspace 4696 0
cpufreq_stats 5636 0
freq_table 4740 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 6428 0
cpufreq_conservative 7332 0
video 16260 0
tc1100_wmi 6916 0
sony_acpi 5644 0
pcc_acpi 12416 0
hotkey 11556 0
dev_acpi 11140 0
container 4608 0
button 6672 0
acpi_sbs 19980 0
battery 9988 1 acpi_sbs
i2c_acpi_ec 5120 1 acpi_sbs
ac 5252 1 acpi_sbs
af_packet 22920 0
vfat 13440 0
fat 53020 1 vfat
dm_mod 58936 1
md_mod 72532 0
lp 11844 0
tsdev 8000 0
parport_pc 35780 1
snd_mpu401 6728 0
snd_mpu401_uart 7808 1 snd_mpu401
parport 36296 3 ppdev,lp,parport_pc
analog 12320 0
snd_rawmidi 25504 1 snd_mpu401_uart
snd_seq_device 8716 1 snd_rawmidi
floppy 62148 0
gameport 15496 1 analog
rtc 13492 0
pcspkr 2180 0
psmouse 36228 0
snd_intel8x0 33692 3
snd_ac97_codec 92704 1 snd_intel8x0
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm_oss 53664 0
snd_mixer_oss 18688 1 snd_pcm_oss
serio_raw 7300 0
snd_pcm 89864 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 25220 2 snd_pcm
snd 55268 14 snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10208 1 snd
snd_page_alloc 10632 2 snd_intel8x0,snd_pcm
intel_agp 22940 1
agpgart 34888 2 intel_agp
i2c_i810 5252 0
i2c_algo_bit 9608 1 i2c_i810
i2c_core 21904 2 i2c_acpi_ec,i2c_algo_bit
hw_random 5652 0
shpchp 45632 0
pci_hotplug 29236 1 shpchp
evdev 9856 1
ext3 135688 1
jbd 58772 1 ext3
ide_generic 1536 0
uhci_hcd 33680 0
usbcore 129668 2 uhci_hcd
ide_cd 33028 0
cdrom 38560 1 ide_cd
ide_disk 17664 3
piix 11012 1
generic 5124 0
thermal 13576 0
processor 23360 1 thermal
fan 4868 0
capability 5000 0
commoncap 7296 1 capability
vga16fb 13704 1
vgastate 10368 1 vga16fb
fbcon 42784 72
tileblit 2816 1 fbcon
font 8320 1 fbcon
bitblit 6272 1 fbcon
softcursor 2304 1 bitblit
bourgois@bourgois-desktop:~$ dmesg |tail -n 20
[4294718.194000] ACPI: Power Button (FF) [PWRF]
[4294718.195000] ACPI: Power Button (CM) [PWRB]
[4294718.195000] ACPI: Sleep Button (CM) [SLPB]
[4294718.527000] ibm_acpi: ec object not found
[4294718.593000] pcc_acpi: loading...
[4294729.881000] ppdev: user-space parallel port driver
[4294730.379000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294730.379000] apm: overridden by ACPI.
[4294741.064000] Bluetooth: Core ver 2.8
[4294741.064000] NET: Registered protocol family 31
[4294741.064000] Bluetooth: HCI device and connection manager initialized
[4294741.064000] Bluetooth: HCI socket layer initialized
[4294741.169000] Bluetooth: L2CAP ver 2.8
[4294741.169000] Bluetooth: L2CAP socket layer initialized
[4294741.198000] Bluetooth: RFCOMM socket layer initialized
[4294741.199000] Bluetooth: RFCOMM TTY layer initialized
[4294741.199000] Bluetooth: RFCOMM ver 1.7
[4294759.608000] NET: Registered protocol family 10
[4294759.608000] lo: Disabled Privacy Extensions
[4294759.609000] IPv6 over IPv4 tunneling driver
-------------------------------------------------------------
j'ai fait dmesg seule avec le Hub et disque dur

bourgois@bourgois-desktop:~$ dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[4294667.296000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 510MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 130800
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126704 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 MSISYS ) @ 0x000f6cb0
[4294667.296000] ACPI: RSDT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3000
[4294667.296000] ACPI: FADT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3040
[4294667.296000] ACPI: DSDT (v001 MSISYS MSI ACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:dfc00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hdb1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01400000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 736.909 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.331000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294668.334000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.407000] Memory: 507956k/523200k available (1976k kernel code, 14636k reserved, 606k data, 288k init, 0k highmem)
[4294668.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.468000] Calibrating delay using timer specific routine.. 1474.77 BogoMIPS (lpj=737387)
[4294668.468000] Security Framework v1.0.0 initialized
[4294668.468000] SELinux: Disabled at boot.
[4294668.468000] Mount-cache hash table entries: 512
[4294668.468000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294668.468000] CPU: L2 cache: 128K
[4294668.468000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294668.468000] mtrr: v2.0 (20020519)
[4294668.468000] CPU: Intel Celeron (Coppermine) stepping 06
[4294668.468000] Enabling fast FPU save and restore... done.
[4294668.468000] Enabling unmasked SIMD FPU exception support... done.
[4294668.468000] Checking 'hlt' instruction... OK.
[4294668.472000] checking if image is initramfs... it is
[4294670.727000] Freeing initrd memory: 6836k freed
[4294670.782000] ACPI: Looking for DSDT ... not found!
[4294670.786000] ACPI: setting ELCR to 0200 (from 0c08)
[4294670.790000] NET: Registered protocol family 16
[4294670.791000] EISA bus registered
[4294670.791000] ACPI: bus type pci registered
[4294670.804000] PCI: PCI BIOS revision 2.10 entry at 0xfb0e0, last bus=1
[4294670.804000] PCI: Using configuration type 1
[4294670.806000] ACPI: Subsystem revision 20051216
[4294670.818000] ACPI: Interpreter enabled
[4294670.818000] ACPI: Using PIC for interrupt routing
[4294670.821000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.821000] PCI: Probing PCI hardware (bus 00)
[4294670.821000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.825000] Boot video device is 0000:00:01.0
[4294670.826000] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[4294670.826000] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[4294670.826000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.826000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.863000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294670.864000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294670.865000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294670.866000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294670.875000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.875000] pnp: PnP ACPI init
[4294670.888000] pnp: PnP ACPI: found 14 devices
[4294670.888000] PnPBIOS: Disabled by ACPI PNP
[4294670.888000] PCI: Using ACPI for IRQ routing
[4294670.888000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.900000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
[4294670.900000] PCI: Bridge: 0000:00:1e.0
[4294670.900000] IO window: disabled.
[4294670.900000] MEM window: dc000000-dc0fffff
[4294670.900000] PREFETCH window: disabled.
[4294670.900000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.901000] audit: initializing netlink socket (disabled)
[4294670.901000] audit(1166696665.900:1): initialized
[4294670.902000] VFS: Disk quotas dquot_6.5.1
[4294670.902000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.902000] Initializing Cryptographic API
[4294670.902000] io scheduler noop registered
[4294670.902000] io scheduler anticipatory registered
[4294670.902000] io scheduler deadline registered
[4294670.902000] io scheduler cfq registered
[4294670.903000] isapnp: Scanning for PnP cards...
[4294671.259000] isapnp: No Plug & Play device found
[4294671.331000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.333000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.334000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.334000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.334000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.345000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.346000] **** SET: Misaligned resource pointer: df95f322 Type 07 Len 0
[4294671.347000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294671.347000] PCI: setting IRQ 10 as level-triggered
[4294671.347000] ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294671.347000] ACPI: PCI interrupt for device 0000:01:01.0 disabled
[4294671.348000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.348000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.348000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.349000] mice: PS/2 mouse device common for all mice
[4294671.349000] EISA: Probing bus 0 at eisa.0
[4294671.350000] Cannot allocate resource for EISA slot 4
[4294671.350000] Cannot allocate resource for EISA slot 5
[4294671.350000] EISA: Detected 0 cards.
[4294671.350000] NET: Registered protocol family 2
[4294671.360000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.360000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.361000] TCP reno registered
[4294671.361000] TCP bic registered
[4294671.361000] NET: Registered protocol family 1
[4294671.361000] NET: Registered protocol family 8
[4294671.361000] NET: Registered protocol family 20
[4294671.361000] Using IPI Shortcut mode
[4294671.362000] ACPI wakeup devices:
[4294671.362000] SLPB PCI0 HUB0 USB0 UAR1 LPT1
[4294671.362000] ACPI: (supports S0 S1 S4 S5)
[4294671.362000] Freeing unused kernel memory: 288k freed
[4294671.376000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.556000] vga16fb: initializing
[4294671.556000] vga16fb: mapped to 0xc00a0000
[4294671.681000] Console: switching to colour frame buffer device 80x25
[4294671.681000] fb0: VGA16 VGA frame buffer device
[4294672.876000] Capability LSM initialized
[4294672.994000] ACPI: Fan [FAN] (on)
[4294673.007000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294673.007000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294673.011000] ACPI: Thermal Zone [THRM] (22 C)
[4294675.001000] ICH: IDE controller at PCI slot 0000:00:1f.1
[4294675.001000] ICH: chipset revision 2
[4294675.001000] ICH: not 100% native mode: will probe irqs later
[4294675.001000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
[4294675.001000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[4294675.001000] Probing IDE interface ide0...
[4294675.469000] hdb: ST34311A, ATA DISK drive
[4294675.520000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.521000] Probing IDE interface ide1...
[4294676.193000] hdc: E5SA CDROM, ATAPI CD/DVD-ROM drive
[4294676.499000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.522000] hdb: max request size: 128KiB
[4294676.547000] hdb: 8405775 sectors (4303 MB) w/256KiB Cache, CHS=8895/15/63, UDMA(33)
[4294676.547000] hdb: cache flushes not supported
[4294676.547000] hdb: hdb1 hdb2 < hdb5 >
[4294676.613000] hdc: ATAPI CD-ROM drive, 128kB Cache, UDMA(33)
[4294676.613000] Uniform CD-ROM driver Revision: 3.20
[4294677.106000] usbcore: registered new driver usbfs
[4294677.107000] usbcore: registered new driver hub
[4294677.114000] USB Universal Host Controller Interface driver v2.3
[4294677.115000] **** SET: Misaligned resource pointer: dfa1d5e2 Type 07 Len 0
[4294677.115000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[4294677.115000] PCI: setting IRQ 3 as level-triggered
[4294677.115000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[4294677.115000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294677.115000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294677.116000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294677.116000] uhci_hcd 0000:00:1f.2: irq 3, io base 0x0000d000
[4294677.117000] hub 1-0:1.0: USB hub found
[4294677.117000] hub 1-0:1.0: 2 ports detected
[4294677.424000] usb 1-2: new full speed USB device using uhci_hcd and address 2[4294677.429000] Attempting manual resume
[4294677.524000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.549000] kjournald starting. Commit interval 5 seconds
[4294677.553000] hub 1-2:1.0: USB hub found
[4294677.555000] hub 1-2:1.0: 4 ports detected
[4294677.832000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3
[4294699.459000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294699.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294699.544000] hw_random hardware driver 1.0.0 loaded
[4294699.741000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[4294700.073000] Linux agpgart interface v0.101 (c) Dave Jones
[4294700.091000] agpgart: Detected an Intel i810 Chipset.
[4294700.108000] agpgart: AGP aperture is 64M @ 0xd8000000
[4294700.605000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294700.605000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294700.898000] input: PC Speaker as /class/input/input1
[4294700.916000] intel8x0_measure_ac97_clock: measured 50227 usecs
[4294700.916000] intel8x0: clocking to 48000
[4294700.996000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[4294702.140000] Real Time Clock Driver v1.12
[4294702.175000] Floppy drive(s): fd0 is 1.44M
[4294702.193000] FDC 0 is a post-1991 82077
[4294702.310000] parport: PnPBIOS parport detected.
[4294702.310000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294702.589000] ts: Compaq touchscreen protocol output
[4294704.097000] lp0: using parport0 (interrupt-driven).
[4294704.286000] Adding 208804k swap on /dev/hdb5. Priority:-1 extents:1 across:208804k
[4294704.483000] EXT3 FS on hdb1, internal journal
[4294704.920000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294704.920000] md: bitmap version 4.39
[4294706.058000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294707.151000] cdrom: open failed.
[4294710.509000] NET: Registered protocol family 17
[4294718.194000] ACPI: Power Button (FF) [PWRF]
[4294718.195000] ACPI: Power Button (CM) [PWRB]
[4294718.195000] ACPI: Sleep Button (CM) [SLPB]
[4294718.527000] ibm_acpi: ec object not found
[4294718.593000] pcc_acpi: loading...
[4294729.881000] ppdev: user-space parallel port driver
[4294730.379000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294730.379000] apm: overridden by ACPI.
[4294741.064000] Bluetooth: Core ver 2.8
[4294741.064000] NET: Registered protocol family 31
[4294741.064000] Bluetooth: HCI device and connection manager initialized
[4294741.064000] Bluetooth: HCI socket layer initialized
[4294741.169000] Bluetooth: L2CAP ver 2.8
[4294741.169000] Bluetooth: L2CAP socket layer initialized
[4294741.198000] Bluetooth: RFCOMM socket layer initialized
[4294741.199000] Bluetooth: RFCOMM TTY layer initialized
[4294741.199000] Bluetooth: RFCOMM ver 1.7
[4294759.608000] NET: Registered protocol family 10
[4294759.608000] lo: Disabled Privacy Extensions
[4294759.609000] IPv6 over IPv4 tunneling driver
[4295182.818000] usb 1-2.2: new full speed USB device using uhci_hcd and address 4
[4295183.187000] SCSI subsystem initialized
[4295183.263000] Initializing USB Mass Storage driver...
[4295183.265000] scsi0 : SCSI emulation for USB Mass Storage devices
[4295183.266000] usb-storage: device found at 4
[4295183.266000] usb-storage: waiting for device to settle before scanning
[4295183.267000] usbcore: registered new driver usb-storage
[4295183.267000] USB Mass Storage support registered.
[4295188.270000] Vendor: Generic Model: USB Flash Disk Rev: 2.00
[4295188.270000] Type: Direct-Access ANSI SCSI revision: 02
[4295188.277000] usb-storage: device scan complete
[4295188.380000] Driver 'sd' needs updating - please use bus_type methods
[4295188.447000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.450000] sda: Write Protect is off
[4295188.450000] sda: Mode Sense: 03 00 00 00
[4295188.450000] sda: assuming drive cache: write through
[4295188.465000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.468000] sda: Write Protect is off
[4295188.468000] sda: Mode Sense: 03 00 00 00
[4295188.468000] sda: assuming drive cache: write through
[4295188.468000] sda: unknown partition table
[4295188.593000] sd 0:0:0:0: Attached scsi removable disk sda
[4295188.638000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4295189.368000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295674.806000] sda : READ CAPACITY failed.
[4295674.806000] sda : status=0, message=00, host=7, driver=00
[4295674.806000] sda : sense not available.
[4295674.807000] sda: Write Protect is off
[4295674.807000] sda: Mode Sense: 00 00 00 00
[4295674.807000] sda: assuming drive cache: write through
[4295674.809000] usb 1-2.2: USB disconnect, address 4
[4295674.845000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda : READ CAPACITY failed.
[4295674.846000] sda : status=0, message=00, host=1, driver=00
[4295674.846000] sda : sense not available.
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda: Write Protect is off
[4295674.847000] sda: Mode Sense: 00 00 00 00
[4295674.847000] sda: assuming drive cache: write through
[4295674.847000] sda:<3> 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.847000] 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.848000] unable to read partition table
--------------------------------------------------------------------------------------------------
Avec le disque dur seule
bourgois@bourgois-desktop:~$ dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[4294667.296000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 510MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 130800
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126704 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 MSISYS ) @ 0x000f6cb0
[4294667.296000] ACPI: RSDT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3000
[4294667.296000] ACPI: FADT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3040
[4294667.296000] ACPI: DSDT (v001 MSISYS MSI ACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:dfc00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hdb1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01400000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 736.909 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.331000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294668.334000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.407000] Memory: 507956k/523200k available (1976k kernel code, 14636k reserved, 606k data, 288k init, 0k highmem)
[4294668.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.468000] Calibrating delay using timer specific routine.. 1474.77 BogoMIPS (lpj=737387)
[4294668.468000] Security Framework v1.0.0 initialized
[4294668.468000] SELinux: Disabled at boot.
[4294668.468000] Mount-cache hash table entries: 512
[4294668.468000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294668.468000] CPU: L2 cache: 128K
[4294668.468000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294668.468000] mtrr: v2.0 (20020519)
[4294668.468000] CPU: Intel Celeron (Coppermine) stepping 06
[4294668.468000] Enabling fast FPU save and restore... done.
[4294668.468000] Enabling unmasked SIMD FPU exception support... done.
[4294668.468000] Checking 'hlt' instruction... OK.
[4294668.472000] checking if image is initramfs... it is
[4294670.727000] Freeing initrd memory: 6836k freed
[4294670.782000] ACPI: Looking for DSDT ... not found!
[4294670.786000] ACPI: setting ELCR to 0200 (from 0c08)
[4294670.790000] NET: Registered protocol family 16
[4294670.791000] EISA bus registered
[4294670.791000] ACPI: bus type pci registered
[4294670.804000] PCI: PCI BIOS revision 2.10 entry at 0xfb0e0, last bus=1
[4294670.804000] PCI: Using configuration type 1
[4294670.806000] ACPI: Subsystem revision 20051216
[4294670.818000] ACPI: Interpreter enabled
[4294670.818000] ACPI: Using PIC for interrupt routing
[4294670.821000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.821000] PCI: Probing PCI hardware (bus 00)
[4294670.821000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.825000] Boot video device is 0000:00:01.0
[4294670.826000] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[4294670.826000] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[4294670.826000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.826000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.863000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294670.864000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294670.865000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294670.866000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294670.875000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.875000] pnp: PnP ACPI init
[4294670.888000] pnp: PnP ACPI: found 14 devices
[4294670.888000] PnPBIOS: Disabled by ACPI PNP
[4294670.888000] PCI: Using ACPI for IRQ routing
[4294670.888000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.900000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
[4294670.900000] PCI: Bridge: 0000:00:1e.0
[4294670.900000] IO window: disabled.
[4294670.900000] MEM window: dc000000-dc0fffff
[4294670.900000] PREFETCH window: disabled.
[4294670.900000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.901000] audit: initializing netlink socket (disabled)
[4294670.901000] audit(1166696665.900:1): initialized
[4294670.902000] VFS: Disk quotas dquot_6.5.1
[4294670.902000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.902000] Initializing Cryptographic API
[4294670.902000] io scheduler noop registered
[4294670.902000] io scheduler anticipatory registered
[4294670.902000] io scheduler deadline registered
[4294670.902000] io scheduler cfq registered
[4294670.903000] isapnp: Scanning for PnP cards...
[4294671.259000] isapnp: No Plug & Play device found
[4294671.331000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.333000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.334000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.334000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.334000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.345000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.346000] **** SET: Misaligned resource pointer: df95f322 Type 07 Len 0
[4294671.347000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294671.347000] PCI: setting IRQ 10 as level-triggered
[4294671.347000] ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294671.347000] ACPI: PCI interrupt for device 0000:01:01.0 disabled
[4294671.348000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.348000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.348000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.349000] mice: PS/2 mouse device common for all mice
[4294671.349000] EISA: Probing bus 0 at eisa.0
[4294671.350000] Cannot allocate resource for EISA slot 4
[4294671.350000] Cannot allocate resource for EISA slot 5
[4294671.350000] EISA: Detected 0 cards.
[4294671.350000] NET: Registered protocol family 2
[4294671.360000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.360000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.361000] TCP reno registered
[4294671.361000] TCP bic registered
[4294671.361000] NET: Registered protocol family 1
[4294671.361000] NET: Registered protocol family 8
[4294671.361000] NET: Registered protocol family 20
[4294671.361000] Using IPI Shortcut mode
[4294671.362000] ACPI wakeup devices:
[4294671.362000] SLPB PCI0 HUB0 USB0 UAR1 LPT1
[4294671.362000] ACPI: (supports S0 S1 S4 S5)
[4294671.362000] Freeing unused kernel memory: 288k freed
[4294671.376000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.556000] vga16fb: initializing
[4294671.556000] vga16fb: mapped to 0xc00a0000
[4294671.681000] Console: switching to colour frame buffer device 80x25
[4294671.681000] fb0: VGA16 VGA frame buffer device
[4294672.876000] Capability LSM initialized
[4294672.994000] ACPI: Fan [FAN] (on)
[4294673.007000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294673.007000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294673.011000] ACPI: Thermal Zone [THRM] (22 C)
[4294675.001000] ICH: IDE controller at PCI slot 0000:00:1f.1
[4294675.001000] ICH: chipset revision 2
[4294675.001000] ICH: not 100% native mode: will probe irqs later
[4294675.001000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
[4294675.001000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[4294675.001000] Probing IDE interface ide0...
[4294675.469000] hdb: ST34311A, ATA DISK drive
[4294675.520000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.521000] Probing IDE interface ide1...
[4294676.193000] hdc: E5SA CDROM, ATAPI CD/DVD-ROM drive
[4294676.499000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.522000] hdb: max request size: 128KiB
[4294676.547000] hdb: 8405775 sectors (4303 MB) w/256KiB Cache, CHS=8895/15/63, UDMA(33)
[4294676.547000] hdb: cache flushes not supported
[4294676.547000] hdb: hdb1 hdb2 < hdb5 >
[4294676.613000] hdc: ATAPI CD-ROM drive, 128kB Cache, UDMA(33)
[4294676.613000] Uniform CD-ROM driver Revision: 3.20
[4294677.106000] usbcore: registered new driver usbfs
[4294677.107000] usbcore: registered new driver hub
[4294677.114000] USB Universal Host Controller Interface driver v2.3
[4294677.115000] **** SET: Misaligned resource pointer: dfa1d5e2 Type 07 Len 0
[4294677.115000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[4294677.115000] PCI: setting IRQ 3 as level-triggered
[4294677.115000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[4294677.115000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294677.115000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294677.116000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294677.116000] uhci_hcd 0000:00:1f.2: irq 3, io base 0x0000d000
[4294677.117000] hub 1-0:1.0: USB hub found
[4294677.117000] hub 1-0:1.0: 2 ports detected
[4294677.424000] usb 1-2: new full speed USB device using uhci_hcd and address 2[4294677.429000] Attempting manual resume
[4294677.524000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.549000] kjournald starting. Commit interval 5 seconds
[4294677.553000] hub 1-2:1.0: USB hub found
[4294677.555000] hub 1-2:1.0: 4 ports detected
[4294677.832000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3
[4294699.459000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294699.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294699.544000] hw_random hardware driver 1.0.0 loaded
[4294699.741000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[4294700.073000] Linux agpgart interface v0.101 (c) Dave Jones
[4294700.091000] agpgart: Detected an Intel i810 Chipset.
[4294700.108000] agpgart: AGP aperture is 64M @ 0xd8000000
[4294700.605000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294700.605000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294700.898000] input: PC Speaker as /class/input/input1
[4294700.916000] intel8x0_measure_ac97_clock: measured 50227 usecs
[4294700.916000] intel8x0: clocking to 48000
[4294700.996000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[4294702.140000] Real Time Clock Driver v1.12
[4294702.175000] Floppy drive(s): fd0 is 1.44M
[4294702.193000] FDC 0 is a post-1991 82077
[4294702.310000] parport: PnPBIOS parport detected.
[4294702.310000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294702.589000] ts: Compaq touchscreen protocol output
[4294704.097000] lp0: using parport0 (interrupt-driven).
[4294704.286000] Adding 208804k swap on /dev/hdb5. Priority:-1 extents:1 across:208804k
[4294704.483000] EXT3 FS on hdb1, internal journal
[4294704.920000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294704.920000] md: bitmap version 4.39
[4294706.058000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294707.151000] cdrom: open failed.
[4294710.509000] NET: Registered protocol family 17
[4294718.194000] ACPI: Power Button (FF) [PWRF]
[4294718.195000] ACPI: Power Button (CM) [PWRB]
[4294718.195000] ACPI: Sleep Button (CM) [SLPB]
[4294718.527000] ibm_acpi: ec object not found
[4294718.593000] pcc_acpi: loading...
[4294729.881000] ppdev: user-space parallel port driver
[4294730.379000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294730.379000] apm: overridden by ACPI.
[4294741.064000] Bluetooth: Core ver 2.8
[4294741.064000] NET: Registered protocol family 31
[4294741.064000] Bluetooth: HCI device and connection manager initialized
[4294741.064000] Bluetooth: HCI socket layer initialized
[4294741.169000] Bluetooth: L2CAP ver 2.8
[4294741.169000] Bluetooth: L2CAP socket layer initialized
[4294741.198000] Bluetooth: RFCOMM socket layer initialized
[4294741.199000] Bluetooth: RFCOMM TTY layer initialized
[4294741.199000] Bluetooth: RFCOMM ver 1.7
[4294759.608000] NET: Registered protocol family 10
[4294759.608000] lo: Disabled Privacy Extensions
[4294759.609000] IPv6 over IPv4 tunneling driver
[4295182.818000] usb 1-2.2: new full speed USB device using uhci_hcd and address 4
[4295183.187000] SCSI subsystem initialized
[4295183.263000] Initializing USB Mass Storage driver...
[4295183.265000] scsi0 : SCSI emulation for USB Mass Storage devices
[4295183.266000] usb-storage: device found at 4
[4295183.266000] usb-storage: waiting for device to settle before scanning
[4295183.267000] usbcore: registered new driver usb-storage
[4295183.267000] USB Mass Storage support registered.
[4295188.270000] Vendor: Generic Model: USB Flash Disk Rev: 2.00
[4295188.270000] Type: Direct-Access ANSI SCSI revision: 02
[4295188.277000] usb-storage: device scan complete
[4295188.380000] Driver 'sd' needs updating - please use bus_type methods
[4295188.447000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.450000] sda: Write Protect is off
[4295188.450000] sda: Mode Sense: 03 00 00 00
[4295188.450000] sda: assuming drive cache: write through
[4295188.465000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.468000] sda: Write Protect is off
[4295188.468000] sda: Mode Sense: 03 00 00 00
[4295188.468000] sda: assuming drive cache: write through
[4295188.468000] sda: unknown partition table
[4295188.593000] sd 0:0:0:0: Attached scsi removable disk sda
[4295188.638000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4295189.368000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295674.806000] sda : READ CAPACITY failed.
[4295674.806000] sda : status=0, message=00, host=7, driver=00
[4295674.806000] sda : sense not available.
[4295674.807000] sda: Write Protect is off
[4295674.807000] sda: Mode Sense: 00 00 00 00
[4295674.807000] sda: assuming drive cache: write through
[4295674.809000] usb 1-2.2: USB disconnect, address 4
[4295674.845000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda : READ CAPACITY failed.
[4295674.846000] sda : status=0, message=00, host=1, driver=00
[4295674.846000] sda : sense not available.
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda: Write Protect is off
[4295674.847000] sda: Mode Sense: 00 00 00 00
[4295674.847000] sda: assuming drive cache: write through
[4295674.847000] sda:<3> 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.847000] 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.848000] unable to read partition table
[4295858.218000] usb 1-2: USB disconnect, address 2
[4295858.218000] usb 1-2.1: USB disconnect, address 3
[4295872.916000] usb 1-2: new full speed USB device using uhci_hcd and address

Sans disque dur
bourbourgois@bourgois-desktop:~$ dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[4294667.296000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 510MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 130800
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126704 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 MSISYS ) @ 0x000f6cb0
[4294667.296000] ACPI: RSDT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3000
[4294667.296000] ACPI: FADT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3040
[4294667.296000] ACPI: DSDT (v001 MSISYS MSI ACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:dfc00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hdb1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01400000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 736.909 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.331000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294668.334000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.407000] Memory: 507956k/523200k available (1976k kernel code, 14636k reserved, 606k data, 288k init, 0k highmem)
[4294668.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.468000] Calibrating delay using timer specific routine.. 1474.77 BogoMIPS (lpj=737387)
[4294668.468000] Security Framework v1.0.0 initialized
[4294668.468000] SELinux: Disabled at boot.
[4294668.468000] Mount-cache hash table entries: 512
[4294668.468000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.468000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294668.468000] CPU: L2 cache: 128K
[4294668.468000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294668.468000] mtrr: v2.0 (20020519)
[4294668.468000] CPU: Intel Celeron (Coppermine) stepping 06
[4294668.468000] Enabling fast FPU save and restore... done.
[4294668.468000] Enabling unmasked SIMD FPU exception support... done.
[4294668.468000] Checking 'hlt' instruction... OK.
[4294668.472000] checking if image is initramfs... it is
[4294670.727000] Freeing initrd memory: 6836k freed
[4294670.782000] ACPI: Looking for DSDT ... not found!
[4294670.786000] ACPI: setting ELCR to 0200 (from 0c08)
[4294670.790000] NET: Registered protocol family 16
[4294670.791000] EISA bus registered
[4294670.791000] ACPI: bus type pci registered
[4294670.804000] PCI: PCI BIOS revision 2.10 entry at 0xfb0e0, last bus=1
[4294670.804000] PCI: Using configuration type 1
[4294670.806000] ACPI: Subsystem revision 20051216
[4294670.818000] ACPI: Interpreter enabled
[4294670.818000] ACPI: Using PIC for interrupt routing
[4294670.821000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.821000] PCI: Probing PCI hardware (bus 00)
[4294670.821000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.825000] Boot video device is 0000:00:01.0
[4294670.826000] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[4294670.826000] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[4294670.826000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.826000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.863000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294670.864000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294670.865000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294670.866000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294670.875000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.875000] pnp: PnP ACPI init
[4294670.888000] pnp: PnP ACPI: found 14 devices
[4294670.888000] PnPBIOS: Disabled by ACPI PNP
[4294670.888000] PCI: Using ACPI for IRQ routing
[4294670.888000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.900000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
[4294670.900000] PCI: Bridge: 0000:00:1e.0
[4294670.900000] IO window: disabled.
[4294670.900000] MEM window: dc000000-dc0fffff
[4294670.900000] PREFETCH window: disabled.
[4294670.900000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.901000] audit: initializing netlink socket (disabled)
[4294670.901000] audit(1166696665.900:1): initialized
[4294670.902000] VFS: Disk quotas dquot_6.5.1
[4294670.902000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.902000] Initializing Cryptographic API
[4294670.902000] io scheduler noop registered
[4294670.902000] io scheduler anticipatory registered
[4294670.902000] io scheduler deadline registered
[4294670.902000] io scheduler cfq registered
[4294670.903000] isapnp: Scanning for PnP cards...
[4294671.259000] isapnp: No Plug & Play device found
[4294671.331000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.333000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.334000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.334000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.334000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.345000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.346000] **** SET: Misaligned resource pointer: df95f322 Type 07 Len 0
[4294671.347000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294671.347000] PCI: setting IRQ 10 as level-triggered
[4294671.347000] ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294671.347000] ACPI: PCI interrupt for device 0000:01:01.0 disabled
[4294671.348000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.348000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.348000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.349000] mice: PS/2 mouse device common for all mice
[4294671.349000] EISA: Probing bus 0 at eisa.0
[4294671.350000] Cannot allocate resource for EISA slot 4
[4294671.350000] Cannot allocate resource for EISA slot 5
[4294671.350000] EISA: Detected 0 cards.
[4294671.350000] NET: Registered protocol family 2
[4294671.360000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.360000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.361000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.361000] TCP reno registered
[4294671.361000] TCP bic registered
[4294671.361000] NET: Registered protocol family 1
[4294671.361000] NET: Registered protocol family 8
[4294671.361000] NET: Registered protocol family 20
[4294671.361000] Using IPI Shortcut mode
[4294671.362000] ACPI wakeup devices:
[4294671.362000] SLPB PCI0 HUB0 USB0 UAR1 LPT1
[4294671.362000] ACPI: (supports S0 S1 S4 S5)
[4294671.362000] Freeing unused kernel memory: 288k freed
[4294671.376000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.556000] vga16fb: initializing
[4294671.556000] vga16fb: mapped to 0xc00a0000
[4294671.681000] Console: switching to colour frame buffer device 80x25
[4294671.681000] fb0: VGA16 VGA frame buffer device
[4294672.876000] Capability LSM initialized
[4294672.994000] ACPI: Fan [FAN] (on)
[4294673.007000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294673.007000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294673.011000] ACPI: Thermal Zone [THRM] (22 C)
[4294675.001000] ICH: IDE controller at PCI slot 0000:00:1f.1
[4294675.001000] ICH: chipset revision 2
[4294675.001000] ICH: not 100% native mode: will probe irqs later
[4294675.001000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
[4294675.001000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[4294675.001000] Probing IDE interface ide0...
[4294675.469000] hdb: ST34311A, ATA DISK drive
[4294675.520000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.521000] Probing IDE interface ide1...
[4294676.193000] hdc: E5SA CDROM, ATAPI CD/DVD-ROM drive
[4294676.499000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.522000] hdb: max request size: 128KiB
[4294676.547000] hdb: 8405775 sectors (4303 MB) w/256KiB Cache, CHS=8895/15/63, UDMA(33)
[4294676.547000] hdb: cache flushes not supported
[4294676.547000] hdb: hdb1 hdb2 < hdb5 >
[4294676.613000] hdc: ATAPI CD-ROM drive, 128kB Cache, UDMA(33)
[4294676.613000] Uniform CD-ROM driver Revision: 3.20
[4294677.106000] usbcore: registered new driver usbfs
[4294677.107000] usbcore: registered new driver hub
[4294677.114000] USB Universal Host Controller Interface driver v2.3
[4294677.115000] **** SET: Misaligned resource pointer: dfa1d5e2 Type 07 Len 0
[4294677.115000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[4294677.115000] PCI: setting IRQ 3 as level-triggered
[4294677.115000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[4294677.115000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294677.115000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294677.116000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294677.116000] uhci_hcd 0000:00:1f.2: irq 3, io base 0x0000d000
[4294677.117000] hub 1-0:1.0: USB hub found
[4294677.117000] hub 1-0:1.0: 2 ports detected
[4294677.424000] usb 1-2: new full speed USB device using uhci_hcd and address 2[4294677.429000] Attempting manual resume
[4294677.524000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.549000] kjournald starting. Commit interval 5 seconds
[4294677.553000] hub 1-2:1.0: USB hub found
[4294677.555000] hub 1-2:1.0: 4 ports detected
[4294677.832000] usb 1-2.1: new full speed USB device using uhci_hcd and address 3
[4294699.459000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294699.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294699.544000] hw_random hardware driver 1.0.0 loaded
[4294699.741000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[4294700.073000] Linux agpgart interface v0.101 (c) Dave Jones
[4294700.091000] agpgart: Detected an Intel i810 Chipset.
[4294700.108000] agpgart: AGP aperture is 64M @ 0xd8000000
[4294700.605000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294700.605000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294700.898000] input: PC Speaker as /class/input/input1
[4294700.916000] intel8x0_measure_ac97_clock: measured 50227 usecs
[4294700.916000] intel8x0: clocking to 48000
[4294700.996000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[4294702.140000] Real Time Clock Driver v1.12
[4294702.175000] Floppy drive(s): fd0 is 1.44M
[4294702.193000] FDC 0 is a post-1991 82077
[4294702.310000] parport: PnPBIOS parport detected.
[4294702.310000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294702.589000] ts: Compaq touchscreen protocol output
[4294704.097000] lp0: using parport0 (interrupt-driven).
[4294704.286000] Adding 208804k swap on /dev/hdb5. Priority:-1 extents:1 across:208804k
[4294704.483000] EXT3 FS on hdb1, internal journal
[4294704.920000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294704.920000] md: bitmap version 4.39
[4294706.058000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294707.151000] cdrom: open failed.
[4294710.509000] NET: Registered protocol family 17
[4294718.194000] ACPI: Power Button (FF) [PWRF]
[4294718.195000] ACPI: Power Button (CM) [PWRB]
[4294718.195000] ACPI: Sleep Button (CM) [SLPB]
[4294718.527000] ibm_acpi: ec object not found
[4294718.593000] pcc_acpi: loading...
[4294729.881000] ppdev: user-space parallel port driver
[4294730.379000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294730.379000] apm: overridden by ACPI.
[4294741.064000] Bluetooth: Core ver 2.8
[4294741.064000] NET: Registered protocol family 31
[4294741.064000] Bluetooth: HCI device and connection manager initialized
[4294741.064000] Bluetooth: HCI socket layer initialized
[4294741.169000] Bluetooth: L2CAP ver 2.8
[4294741.169000] Bluetooth: L2CAP socket layer initialized
[4294741.198000] Bluetooth: RFCOMM socket layer initialized
[4294741.199000] Bluetooth: RFCOMM TTY layer initialized
[4294741.199000] Bluetooth: RFCOMM ver 1.7
[4294759.608000] NET: Registered protocol family 10
[4294759.608000] lo: Disabled Privacy Extensions
[4294759.609000] IPv6 over IPv4 tunneling driver
[4295182.818000] usb 1-2.2: new full speed USB device using uhci_hcd and address 4
[4295183.187000] SCSI subsystem initialized
[4295183.263000] Initializing USB Mass Storage driver...
[4295183.265000] scsi0 : SCSI emulation for USB Mass Storage devices
[4295183.266000] usb-storage: device found at 4
[4295183.266000] usb-storage: waiting for device to settle before scanning
[4295183.267000] usbcore: registered new driver usb-storage
[4295183.267000] USB Mass Storage support registered.
[4295188.270000] Vendor: Generic Model: USB Flash Disk Rev: 2.00
[4295188.270000] Type: Direct-Access ANSI SCSI revision: 02
[4295188.277000] usb-storage: device scan complete
[4295188.380000] Driver 'sd' needs updating - please use bus_type methods
[4295188.447000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.450000] sda: Write Protect is off
[4295188.450000] sda: Mode Sense: 03 00 00 00
[4295188.450000] sda: assuming drive cache: write through
[4295188.465000] SCSI device sda: 128512 512-byte hdwr sectors (66 MB)
[4295188.468000] sda: Write Protect is off
[4295188.468000] sda: Mode Sense: 03 00 00 00
[4295188.468000] sda: assuming drive cache: write through
[4295188.468000] sda: unknown partition table
[4295188.593000] sd 0:0:0:0: Attached scsi removable disk sda
[4295188.638000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4295189.368000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295674.806000] sda : READ CAPACITY failed.
[4295674.806000] sda : status=0, message=00, host=7, driver=00
[4295674.806000] sda : sense not available.
[4295674.807000] sda: Write Protect is off
[4295674.807000] sda: Mode Sense: 00 00 00 00
[4295674.807000] sda: assuming drive cache: write through
[4295674.809000] usb 1-2.2: USB disconnect, address 4
[4295674.845000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda : READ CAPACITY failed.
[4295674.846000] sda : status=0, message=00, host=1, driver=00
[4295674.846000] sda : sense not available.
[4295674.846000] 0:0:0:0: rejecting I/O to dead device
[4295674.846000] sda: Write Protect is off
[4295674.847000] sda: Mode Sense: 00 00 00 00
[4295674.847000] sda: assuming drive cache: write through
[4295674.847000] sda:<3> 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.847000] 0:0:0:0: rejecting I/O to dead device
[4295674.847000] Buffer I/O error on device sda, logical block 0
[4295674.848000] unable to read partition table
[4295858.218000] usb 1-2: USB disconnect, address 2
[4295858.218000] usb 1-2.1: USB disconnect, address 3
[4295872.916000] usb 1-2: new full speed USB device using uhci_hcd and address 5[4296001.460000] usb 1-2: USB disconnect, address 5
il n'y a pas a dire ce disque dur m'en veut
Amicalement

CasseTaTele · Le 21/12/2006, à 14:15

si je résume,
quand tu branche le disque dur, le message suivant apparait :
[4295872.916000] usb 1-2: new full speed USB device using uhci_hcd and address 5

quand tu le débranche tu as le message :
[4296001.460000] usb 1-2: USB disconnect, address 5

il détecte quelquechose c'est déjà ça... comment le monter c'est une autre histoire ...

thom83 · Le 21/12/2006, à 15:37

@BOURGOIS
j'ai essayé de comprendre quelque chose à ton LONG message #93.
Pour l'étudier, je l'ai recopié dans gedit et c'est là que je prends les numéros de lignes.
À la ligne 129 tu dis

j'ai fait dmesg seule avec le Hub et disque dur

C'est pour au-dessus ou au-dessous?
Ligne 283, detection du disque interne branché sur la nappe 2 (hdb)
ligne 286 idem pour le CDrom (hdc)
ligne 354 idem pour la clé usb à l'adresse 4 et avec 66 MB (ligne366) dénommé sda
À la ligne 384, tu la débranches. Et à la ligne 399 se termine provisoirement le fichier dsmsg.

Avec le disque dur seule

Cà s'applique bien à ce qui vient après?
Jusqu'à a ligne 670 incluse, il n'y a rien de neuf, cette ligne etant la 399 de tout-à-l'heure.
Ce qu'on voit après, c'est semble-t-il, la déconnexion du hub, puis la connexion et la deconnexion du disque usb. Il est donc détecté.
À mon avis, dans les prochains tests, il ne faudrait pas que tu les fasses tantôt avec ou sans clé usb. Çà complique inutilement.
Oublie les «dmesg» intégraux. Les 10 ou 20 dernières suffisent.

thom83 · Le 21/12/2006, à 17:33

@BOURGOIS
Je viens de reparcourir ce qui s'est dit depuis le début et il va falloir avoir de la rigueur et aller pas à pas.
Disque Archos pas branché.
D'abord remettre /etc/fstab d'aplomb. Dans un terminal,

sudo gedit /etc/fstab

Mettre en commentaire les lignes commençant par /dev/hdc et /dev/hdc1 (çà consiste à mettre un # en début de ces lignes pour les neutraliser. Ce caractère s'obtient avec la touche AltGr -à droite de la barre d'espace- et la touche 3/" en haut du clavier pressées ensemble)
Après çà, enregistrer et quitter gedit. Puis

sudo mount -a

Mettre un cdrom dans le lecteur. Voir s'il est possible de lire le cd.
S'il n'est pas visible (et seulement si), vérifier que les 3 premières cases sont cochées dans Disques et media amovible (Système -> Préférences -> Dis...). Si tel est bien le cas et que le cd n'est pas visible, Éditer à nouveau /etc/fstab pour remplacer /dev/hdd par /dev/hdc. Après avoir quitté gedit, à nouveau :

sudo mount -a

Il devrait y avoir, sur le bureau, une icone représentant un cd et le cd doit pouvoir s'ouvrir dans Raccorcis -> poste de travail.
Ensuite, résultat de la commande

cat /proc/bus/usb/devices

à tanscrire.
Disque Archos branché.
Lancer à nouveau la commande

cat /proc/bus/usb/devices

et transcrire le résultat.
Entre le début et la fin, ne pas toucher à la clé usb ni au hub. Si c'est en place avant çà y reste jusqu'au bout et vice versa.
On avisera pour la suite en fonction des résultats.
Pendant qu'on y est et que le disque est branché, on peut faire un
sudo fdisk -l (L minuscule et le tout en 3 mots)

Dernière modification par thom83 (Le 21/12/2006, à 17:36)

BOURGOIS · Le 21/12/2006, à 18:35

bonsoir
OK pour la rigueur
si j'ai bien compris il faut que je neutralise les lignes /dev/hdc - /dev/hdc1 ce que je vais fais et voila le resultat
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hdb1 / ext3 defaults,errors=remount-ro 0 1
/dev/hdb5 none swap sw 0 0
#/dev/hdc /media/usbdisk vfat user,noauto 0 0
/dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0
#/dev/hdc1 /media/hdc1 vfat user,noauto 0 0
/dev/sda1 /media/usbdisk vfat defaults,umask=0 0 0
--------------------------------------------------------------------
apres avoir fait sudo mount -a
bourgois@bourgois-desktop:~$ sudo mount -a
mount: périphérique spécial /dev/sda1 n'existe pas
------------------------------------------------------
disque dur archos non branche: voila le resultat
cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
--------------------------------------------------------
et un autre avec le disque dur archos branche
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=081a Rev= 1.09
S: Manufacturer=ARC
S: Product=USB Cable
S: SerialNumber=91548cf2-e8ad-11d3-a10d-808af0917545
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
comme je l'ai deja remarque, il reconné <S: Product=USB Cable> le cable comme sur XP si je n'installe pas le pilote
quand j'intalle ce disque archos sur XP il y a un momment avant qu'il fasse l'execution automatique avant d'etre reconnu dans leposte de travail
Amicalement

thom83 · Le 21/12/2006, à 19:00

Il est reconnu. Il est connecté en usb 1.1 (Spd=12 sur la ligne T).
Quand il est branché, que donne lsusb (sans ajouter ou enlever de clé usb car cela fait changer le nom des disques, bien souvent).
Et un sudo fdisk -l ?
Deux questions -> deux réponses

Dernière modification par thom83 (Le 21/12/2006, à 19:02)

thom83 · Le 22/12/2006, à 00:06

Un dernier mesage pour aujourd'hui. J'ai trouvé les liens suivants sur les produits archos. Ceux-ci fonctionnent avec linux. Mais avec des fortunes diverses. Certains se plaignent de devoir attendre jusqu'à 5 à 15 minutes pour l'initialisation (et donc la lecture). Certains évoquent le problème de l'alimentation un peu trop faible à partir de l'ordinateur hote.
Voici les liens dans l'ordre où je les ai lus

http://marc2.theaimsgroup.com/?l=linux-usb-users&m=100457155809048&w=2
http://sourceforge.net/mailarchive/message.php?msg_id=8022965
http://www.linuxforums.org/forum/suse-linux-help/56054-installing-suse-10-external-usb-drive-3.html
en particulier question alimentation(http://www.linuxforums.org/forum/361962-post27.html)
http://www.qbik.ch/usb/devices/showdev.php?id=563 (avis partagés, problèmes de lenteur)

Si le contenu du disque pouvait être sauvegardé ailleurs, il serait plus pratique de partitionner en unités plus petites et reformater le disque.
Cordialement.

BOURGOIS · Le 22/12/2006, à 06:04

bonjour
je vient de prendre connaissance de ton dernier message;helas je ne sais pas lire l'anglais
j'ai essaye avec un traducteur il semblerais que les disques Archos soit de vilain cochon d'apres la traduction
pour le formatage; la question est: serait 'il reconnu par XP,avec ce disque avant qu'il ne soient operationnel on attand facilement 1 Mn le temps de l'execution automatique ce finisse
pour le moment je n'ai que mon portable pour faire la liaison internet
la question faut il continué a chercher ou pas à faire fonctionné ce disque Archos sur Ubuntu
pour moi personnellement je dirais oui car cela est une question technique qui peut servire a
beaucoup de monde
par contre pour toi etant donne que je suis un debutant dans l'informatique libre, es tu interrese pour continué
voila, je te donnerais les resultats demain matin a tes deux questions par contre pour toi j'espere que tu seras toujours d'accord pour continué a m'aider bien comme je te l'ai ecrit j'ai commandé ubuntu 6.10- pour la reception de ce CD-ROM ?????
mais le probleme serat toujour le meme, serat il reconnaitre le disque Archos
la femme commence a s'enerver de me voir pris par l'ordi
Amicalement

thom83 · Le 22/12/2006, à 10:11

Le sujet peut intéresser d'autres personnes également, c'est pourquoi j'i mis les liens.
Parmi ceux-ci, il en est qui montrent que ce disque est utilisable avec linux. Par ailleurs, il y en a qui se plaignent de devoir attendre de longues minutes pour qu'il soit lisible (certains parlent de 10 à 15 mn).
Il se peut que ton disque soit utilisé d'une façon que je ne maitrise pas (en raid par exemple - pas la peine de me demander comment çà fonctionne).
Autre question que j'ai oublié de poser : après remise en état de /etc/fstab, le cdrom fonctionne-t-il correctement ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#76 Le 20/12/2006, à 14:29

Re : fonctionner disque dur externe

#77 Le 20/12/2006, à 14:45

Re : fonctionner disque dur externe

#78 Le 20/12/2006, à 14:53

Re : fonctionner disque dur externe

#79 Le 20/12/2006, à 15:06

Re : fonctionner disque dur externe

#80 Le 20/12/2006, à 16:26

Re : fonctionner disque dur externe

#81 Le 20/12/2006, à 18:04

Re : fonctionner disque dur externe

#82 Le 20/12/2006, à 18:12

Re : fonctionner disque dur externe

#83 Le 20/12/2006, à 18:23

Re : fonctionner disque dur externe

#84 Le 20/12/2006, à 18:33

Re : fonctionner disque dur externe

#85 Le 20/12/2006, à 19:21

Re : fonctionner disque dur externe

#86 Le 21/12/2006, à 10:20

Re : fonctionner disque dur externe

#87 Le 21/12/2006, à 10:42

Re : fonctionner disque dur externe

#88 Le 21/12/2006, à 11:40

Re : fonctionner disque dur externe

#89 Le 21/12/2006, à 11:47

Re : fonctionner disque dur externe

#90 Le 21/12/2006, à 11:57

Re : fonctionner disque dur externe

#91 Le 21/12/2006, à 12:42

Re : fonctionner disque dur externe

#92 Le 21/12/2006, à 12:46

Re : fonctionner disque dur externe

#93 Le 21/12/2006, à 14:15

Re : fonctionner disque dur externe

#94 Le 21/12/2006, à 15:37

Re : fonctionner disque dur externe

#95 Le 21/12/2006, à 17:33

Re : fonctionner disque dur externe

#96 Le 21/12/2006, à 18:35

Re : fonctionner disque dur externe

#97 Le 21/12/2006, à 19:00

Re : fonctionner disque dur externe

#98 Le 22/12/2006, à 00:06

Re : fonctionner disque dur externe

#99 Le 22/12/2006, à 06:04

Re : fonctionner disque dur externe

#100 Le 22/12/2006, à 10:11

Re : fonctionner disque dur externe

Pied de page des forums