#76 Le 08/04/2022, à 22:59
- Nuliel
Re : Couplage "Plantronics Backbeat pro 2" impossible
Il faut appairer avant de se connecter normalement, comme je l'ai mis au #63.
Tu peux donner
sudo dmesgpour voir s'il y a des erreurs liées au bluetooth
Hors ligne
#77 Le 08/04/2022, à 23:05
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Use "help" for a list of available commands in a menu.
Use "menu <submenu>" if you want to enter any submenu.
Use "back" if you want to return to menu main.
[bluetooth]# agent on
Agent is already registered
[bluetooth]# power on
Changing power on succeeded
[bluetooth]# scan on
Discovery started
[CHG] Controller 00:E0:4C:87:59:03 Discovering: yes
[NEW] Device 5D:7A:E4:70:B3:EF 5D-7A-E4-70-B3-EF
[NEW] Device 46:69:C5:AF:23:B0 46-69-C5-AF-23-B0
[CHG] Device CB:76:CC:F3:5A:2F RSSI: -99
[CHG] Device 46:69:C5:AF:23:B0 RSSI: -99
[NEW] Device 4B:68:8E:36:77:D9 4B-68-8E-36-77-D9
[CHG] Device 46:69:C5:AF:23:B0 RSSI: -89
[NEW] Device 56:72:A7:4A:53:BB 56-72-A7-4A-53-BB
[CHG] Device 56:72:A7:4A:53:BB RSSI: -99
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[CHG] Device 56:72:A7:4A:53:BB RSSI: -89
[bluetooth]# connect BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[NEW] Device 62:0D:16:50:86:DA 62-0D-16-50-86-DA
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[bluetooth]# Hors ligne
#78 Le 08/04/2022, à 23:21
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
jean-marie@jeanmarie-HP-Z400-Workstation:~$ bluetoothctl
Agent registered
[bluetooth]# agent on
Agent is already registered
[DEL] Device 5D:7A:E4:70:B3:EF 5D-7A-E4-70-B3-EF
[DEL] Device 56:72:A7:4A:53:BB 56-72-A7-4A-53-BB
[DEL] Device 61:50:5B:9F:14:22 61-50-5B-9F-14-22
[DEL] Device 56:1A:92:D2:DA:42 56-1A-92-D2-DA-42
[DEL] Device 4B:68:8E:36:77:D9 4B-68-8E-36-77-D9
[DEL] Device 62:0D:16:50:86:DA 62-0D-16-50-86-DA
[bluetooth]# power on
Changing power on succeeded
[bluetooth]# scan on
Discovery started
[CHG] Controller 00:E0:4C:87:59:03 Discovering: yes
[NEW] Device 55:77:EA:97:5C:AF 55-77-EA-97-5C-AF
[CHG] Device CB:76:CC:F3:5A:2F RSSI: -97
[NEW] Device 56:72:A7:4A:53:BB 56-72-A7-4A-53-BB
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[NEW] Device 62:0D:16:50:86:DA 62-0D-16-50-86-DA
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Key: 0x004c
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Value:
0c 0e 00 19 00 6f a1 69 30 e4 2f 2f 72 2f 32 54 .....o.i0.//r/2T
10 05 47 1c 45 71 54 ..G.EqT
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Key: 0x004c
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Value:
0c 0e 00 1a 00 68 72 5a 7a c6 29 7f 66 ae 93 39 .....hrZz.).f..9
10 05 4b 1c 45 71 54 ..K.EqT
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Key: 0x004c
[CHG] Device 56:72:A7:4A:53:BB ManufacturerData Value:
0c 0e 00 1b 00 e8 63 08 51 11 e0 ec 79 99 ef b2 ......c.Q...y...
10 05 4b 1c 45 71 54 ..K.EqT
[bluetooth]# quit
jean-marie@jeanmarie-HP-Z400-Workstation:~$ Rien n'y fait.
Hors ligne
#79 Le 08/04/2022, à 23:22
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Avec "sudo dmesg", il me met une vraie tartine !
Hors ligne
#80 Le 09/04/2022, à 06:43
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Bonjour,
Donne la tartine > nous pouvons l'absorber.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#81 Le 09/04/2022, à 09:22
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
jean-marie@jeanmarie-HP-Z400-Workstation:~$ sudo dmesg
[sudo] Mot de passe de jean-marie :
[ 0.000000] microcode: microcode updated early to revision 0x1d, date = 2018-05-11
[ 0.000000] Linux version 5.13.0-39-generic (buildd@lcy02-amd64-080) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #44~20.04.1-Ubuntu SMP Thu Mar 24 16:43:35 UTC 2022 (Ubuntu 5.13.0-39.44~20.04.1-generic 5.13.19)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-39-generic root=UUID=0b92a1a1-ccf1-4009-8b56-c51a1345ad81 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000957ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000095800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000defa57ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000defa5800-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.57 07/15/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3066.940 MHz processor
[ 0.001311] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001314] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001319] last_pfn = 0x320000 max_arch_pfn = 0x400000000
[ 0.001902] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002398] last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
[ 0.009364] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff]
[ 0.009743] RAMDISK: [mem 0x3077d000-0x343b5fff]
[ 0.009750] ACPI: Early table checksum verification disabled
[ 0.009754] ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM)
[ 0.009758] ACPI: XSDT 0x00000000DEFB88E8 00006C (v01 HPQOEM SLIC-WKS 20130715 00000000)
[ 0.009764] ACPI: FACP 0x00000000DEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009769] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20210331/tbfadt-564)
[ 0.009772] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20210331/tbfadt-564)
[ 0.009774] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20210331/tbfadt-669)
[ 0.009778] ACPI: DSDT 0x00000000DEFB90A3 00A307 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.009781] ACPI: FACS 0x00000000DEFB8800 000040
[ 0.009785] ACPI: FACS 0x00000000DEFB8800 000040
[ 0.009788] ACPI: APIC 0x00000000DEFB8B7C 000108 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009791] ACPI: ASF! 0x00000000DEFB8C84 000063 (v32 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009795] ACPI: MCFG 0x00000000DEFB8CE7 00003C (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009798] ACPI: TCPA 0x00000000DEFB8D23 000032 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009802] ACPI: SLIC 0x00000000DEFB8D55 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
[ 0.009805] ACPI: HPET 0x00000000DEFB8ECB 000038 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009809] ACPI: DMAR 0x00000000DEFB8F03 000170 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.009813] ACPI: SSDT 0x00000000DEFC4A99 0013C8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.009816] ACPI: Reserving FACP table memory at [mem 0xdefb8a88-0xdefb8b7b]
[ 0.009817] ACPI: Reserving DSDT table memory at [mem 0xdefb90a3-0xdefc33a9]
[ 0.009818] ACPI: Reserving FACS table memory at [mem 0xdefb8800-0xdefb883f]
[ 0.009819] ACPI: Reserving FACS table memory at [mem 0xdefb8800-0xdefb883f]
[ 0.009820] ACPI: Reserving APIC table memory at [mem 0xdefb8b7c-0xdefb8c83]
[ 0.009821] ACPI: Reserving ASF! table memory at [mem 0xdefb8c84-0xdefb8ce6]
[ 0.009822] ACPI: Reserving MCFG table memory at [mem 0xdefb8ce7-0xdefb8d22]
[ 0.009823] ACPI: Reserving TCPA table memory at [mem 0xdefb8d23-0xdefb8d54]
[ 0.009824] ACPI: Reserving SLIC table memory at [mem 0xdefb8d55-0xdefb8eca]
[ 0.009825] ACPI: Reserving HPET table memory at [mem 0xdefb8ecb-0xdefb8f02]
[ 0.009826] ACPI: Reserving DMAR table memory at [mem 0xdefb8f03-0xdefb9072]
[ 0.009827] ACPI: Reserving SSDT table memory at [mem 0xdefc4a99-0xdefc5e60]
[ 0.009837] ACPI: Local APIC address 0xfee00000
[ 0.009935] No NUMA configuration found
[ 0.009936] Faking a node at [mem 0x0000000000000000-0x000000031fffffff]
[ 0.009946] NODE_DATA(0) allocated [mem 0x31ffd2000-0x31fffbfff]
[ 0.010287] Zone ranges:
[ 0.010288] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010290] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010291] Normal [mem 0x0000000100000000-0x000000031fffffff]
[ 0.010293] Device empty
[ 0.010294] Movable zone start for each node
[ 0.010297] Early memory node ranges
[ 0.010297] node 0: [mem 0x0000000000001000-0x0000000000094fff]
[ 0.010299] node 0: [mem 0x0000000000100000-0x00000000defa4fff]
[ 0.010300] node 0: [mem 0x0000000100000000-0x000000031fffffff]
[ 0.010303] Initmem setup node 0 [mem 0x0000000000001000-0x000000031fffffff]
[ 0.010304] On node 0 totalpages: 3141433
[ 0.010306] DMA zone: 64 pages used for memmap
[ 0.010306] DMA zone: 148 pages reserved
[ 0.010307] DMA zone: 3988 pages, LIFO batch:0
[ 0.010308] DMA32 zone: 14207 pages used for memmap
[ 0.010309] DMA32 zone: 909221 pages, LIFO batch:63
[ 0.010311] Normal zone: 34816 pages used for memmap
[ 0.010311] Normal zone: 2228224 pages, LIFO batch:63
[ 0.010314] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010342] On node 0, zone DMA: 107 pages in unavailable ranges
[ 0.044395] On node 0, zone Normal: 4187 pages in unavailable ranges
[ 0.044582] ACPI: PM-Timer IO Port: 0xf808
[ 0.044585] ACPI: Local APIC address 0xfee00000
[ 0.044593] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.044595] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.044596] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.044597] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.044598] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.044599] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.044600] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.044601] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.044611] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.044618] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
[ 0.044620] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.044622] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.044624] ACPI: IRQ0 used by override.
[ 0.044625] ACPI: IRQ9 used by override.
[ 0.044628] Using ACPI (MADT) for SMP configuration information
[ 0.044629] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.044634] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.044646] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.044648] PM: hibernation: Registered nosave memory: [mem 0x00095000-0x00095fff]
[ 0.044649] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x0009ffff]
[ 0.044650] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.044651] PM: hibernation: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.044652] PM: hibernation: Registered nosave memory: [mem 0xdefa5000-0xdefa5fff]
[ 0.044653] PM: hibernation: Registered nosave memory: [mem 0xdefa6000-0xdfffffff]
[ 0.044654] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.044655] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.044656] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[ 0.044656] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
[ 0.044657] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.044658] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.044660] [mem 0xe0000000-0xefffffff] available for PCI devices
[ 0.044661] Booting paravirtualized kernel on bare hardware
[ 0.044664] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.044671] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.046260] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
[ 0.046272] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
[ 0.046275] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.046281] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.046311] Built 1 zonelists, mobility grouping on. Total pages: 3092198
[ 0.046313] Policy zone: Normal
[ 0.046314] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-39-generic root=UUID=0b92a1a1-ccf1-4009-8b56-c51a1345ad81 ro quiet splash vt.handoff=7
[ 0.047949] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.048736] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.048906] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.100215] Memory: 12168240K/12565732K available (16393K kernel code, 3512K rwdata, 10496K rodata, 2896K init, 5732K bss, 397232K reserved, 0K cma-reserved)
[ 0.100223] random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=0
[ 0.100358] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.100371] Kernel/User page tables isolation: enabled
[ 0.100392] ftrace: allocating 49259 entries in 193 pages
[ 0.117222] ftrace: allocated 193 pages with 3 groups
[ 0.117374] rcu: Hierarchical RCU implementation.
[ 0.117376] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.117378] Rude variant of Tasks RCU enabled.
[ 0.117378] Tracing variant of Tasks RCU enabled.
[ 0.117379] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.117380] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.122107] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
[ 0.122462] vt handoff: transparent VT on vt#7
[ 0.122471] Console: colour dummy device 80x25
[ 0.122484] printk: console [tty0] enabled
[ 0.122506] ACPI: Core revision 20210331
[ 0.122588] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.122602] APIC: Switch to symmetric I/O mode setup
[ 0.122603] DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
[ 0.122605] Switched APIC routing to physical flat.
[ 0.123251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.142599] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c3549314b1, max_idle_ns: 440795339157 ns
[ 0.142604] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.88 BogoMIPS (lpj=12267760)
[ 0.142607] pid_max: default: 32768 minimum: 301
[ 0.142636] LSM: Security Framework initializing
[ 0.142645] Yama: becoming mindful.
[ 0.142669] AppArmor: AppArmor initialized
[ 0.142723] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.142759] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.143017] CPU0: Thermal monitoring enabled (TM1)
[ 0.143033] process: using mwait in idle threads
[ 0.143035] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.143036] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.143039] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.143041] Spectre V2 : Mitigation: Retpolines
[ 0.143041] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.143042] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.143044] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.143044] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.143046] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.143048] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.147278] Freeing SMP alternatives memory: 40K
[ 0.149629] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1068
[ 0.257652] smpboot: CPU0: Intel(R) Xeon(R) CPU W3550 @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[ 0.257783] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[ 0.257790] core: CPU erratum AAJ80 worked around
[ 0.257791] core: CPUID marked event: 'bus cycles' unavailable
[ 0.257792] ... version: 3
[ 0.257793] ... bit width: 48
[ 0.257794] ... generic registers: 4
[ 0.257794] ... value mask: 0000ffffffffffff
[ 0.257795] ... max period: 000000007fffffff
[ 0.257796] ... fixed-purpose events: 3
[ 0.257797] ... event mask: 000000070000000f
[ 0.257898] rcu: Hierarchical SRCU implementation.
[ 0.258602] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.258602] smp: Bringing up secondary CPUs ...
[ 0.258602] x86: Booting SMP configuration:
[ 0.258602] .... node #0, CPUs: #1 #2 #3
[ 0.265598] smp: Brought up 1 node, 4 CPUs
[ 0.265598] smpboot: Max logical packages: 4
[ 0.265598] smpboot: Total of 4 processors activated (24535.52 BogoMIPS)
[ 0.267276] devtmpfs: initialized
[ 0.267276] x86/mm: Memory block size: 128MB
[ 0.270937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.270937] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.270937] pinctrl core: initialized pinctrl subsystem
[ 0.270937] PM: RTC time: 06:55:27, date: 2022-04-09
[ 0.271010] NET: Registered protocol family 16
[ 0.271310] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.271524] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.271746] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.271760] audit: initializing netlink subsys (disabled)
[ 0.271777] audit: type=2000 audit(1649487327.148:1): state=initialized audit_enabled=0 res=1
[ 0.271777] thermal_sys: Registered thermal governor 'fair_share'
[ 0.271777] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.271777] thermal_sys: Registered thermal governor 'step_wise'
[ 0.271777] thermal_sys: Registered thermal governor 'user_space'
[ 0.271777] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.271777] EISA bus registered
[ 0.271777] cpuidle: using governor ladder
[ 0.271777] cpuidle: using governor menu
[ 0.271777] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271777] ACPI: bus type PCI registered
[ 0.271777] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.271777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.271777] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.271777] PCI: Using configuration type 1 for base access
[ 0.272402] Kprobes globally optimized
[ 0.272407] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.274695] ACPI: Added _OSI(Module Device)
[ 0.274696] ACPI: Added _OSI(Processor Device)
[ 0.274697] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.274698] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274700] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.274701] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.274702] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.277815] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.280141] ACPI: Interpreter enabled
[ 0.280159] ACPI: (supports S0 S3 S4 S5)
[ 0.280160] ACPI: Using IOAPIC for interrupt routing
[ 0.280182] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.280867] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.287726] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.287733] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.287801] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20210331/dsfield-184)
[ 0.287807] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20210331/dswload2-477)
[ 0.287812]
Initialized Local Variables for Method [_OSC]:
[ 0.287813] Local0: (____ptrval____) <Obj> Integer 0000000000000001
[ 0.287818] Local1: (____ptrval____) <Obj> Integer 0000000000000005
[ 0.287822] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation)
[ 0.287823] Arg0: (____ptrval____) <Obj> Buffer(16) 5B 4D DB 33 F7 1F 1C 40
[ 0.287830] Arg1: (____ptrval____) <Obj> Integer 0000000000000001
[ 0.287833] Arg2: (____ptrval____) <Obj> Integer 0000000000000003
[ 0.287836] Arg3: (____ptrval____) <Obj> Buffer(12) 01 00 00 00 1F 01 00 00
[ 0.287844] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20210331/psparse-529)
[ 0.287853] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ALREADY_EXISTS)
[ 0.288069] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af window]; [io 0x0000-0x03af window] ignored
[ 0.288246] PCI host bridge to bus 0000:00
[ 0.288249] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.288251] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.288253] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
[ 0.288254] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.288256] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.288257] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfaffffff window]
[ 0.288259] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.288260] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.288279] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.288306] pci 0000:00:00.0: enabling Extended Tags
[ 0.288343] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.288443] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.288471] pci 0000:00:01.0: enabling Extended Tags
[ 0.288511] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.288632] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.288697] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.288815] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.288843] pci 0000:00:07.0: enabling Extended Tags
[ 0.288883] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.288997] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[ 0.289100] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[ 0.289200] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
[ 0.289308] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
[ 0.289410] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.289550] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.289670] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.289788] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
[ 0.289891] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.289930] pci 0000:00:1a.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.290056] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.290094] pci 0000:00:1a.1: reg 0x20: [io 0xd020-0xd03f]
[ 0.290223] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.290262] pci 0000:00:1a.2: reg 0x20: [io 0xd040-0xd05f]
[ 0.290401] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.290416] pci 0000:00:1a.7: reg 0x10: [mem 0xf8004800-0xf8004bff]
[ 0.290495] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.290599] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.290618] pci 0000:00:1b.0: reg 0x10: [mem 0xf8000000-0xf8003fff 64bit]
[ 0.290691] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.290778] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.290854] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.290979] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.291056] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.291171] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.291210] pci 0000:00:1d.0: reg 0x20: [io 0xd060-0xd07f]
[ 0.291337] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.291375] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.291501] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.291540] pci 0000:00:1d.2: reg 0x20: [io 0xd0a0-0xd0bf]
[ 0.291676] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.291692] pci 0000:00:1d.7: reg 0x10: [mem 0xf8004c00-0xf8004fff]
[ 0.291770] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.291873] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.292016] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.292090] pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window
[ 0.292095] pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window
[ 0.292098] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.292101] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.292103] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.292224] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[ 0.292237] pci 0000:00:1f.2: reg 0x10: [io 0xd100-0xd107]
[ 0.292244] pci 0000:00:1f.2: reg 0x14: [io 0xd110-0xd113]
[ 0.292251] pci 0000:00:1f.2: reg 0x18: [io 0xd108-0xd10f]
[ 0.292257] pci 0000:00:1f.2: reg 0x1c: [io 0xd114-0xd117]
[ 0.292264] pci 0000:00:1f.2: reg 0x20: [io 0xd0c0-0xd0df]
[ 0.292271] pci 0000:00:1f.2: reg 0x24: [mem 0xf8004000-0xf80047ff]
[ 0.292309] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.292462] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
[ 0.292495] pci 0000:03:00.0: reg 0x10: [mem 0xf9000000-0xf9001fff 64bit]
[ 0.292665] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.302640] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.302649] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.302740] pci 0000:0f:00.0: [10de:0638] type 00 class 0x030000
[ 0.302752] pci 0000:0f:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.302761] pci 0000:0f:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.302771] pci 0000:0f:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.302777] pci 0000:0f:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.302784] pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.302919] pci 0000:00:03.0: PCI bridge to [bus 0f]
[ 0.302922] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.302925] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.302929] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.302975] pci 0000:00:07.0: PCI bridge to [bus 28]
[ 0.303031] pci 0000:00:1c.0: PCI bridge to [bus 1c]
[ 0.303109] pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000
[ 0.303136] pci 0000:01:00.0: reg 0x10: [mem 0xf7000000-0xf700ffff 64bit]
[ 0.303195] pci 0000:01:00.0: enabling Extended Tags
[ 0.303293] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.303429] pci 0000:00:1c.5: PCI bridge to [bus 01]
[ 0.303434] pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.303453] pci_bus 0000:37: extended config space not accessible
[ 0.303506] pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.303522] pci 0000:37:05.0: reg 0x10: [mem 0xfa000000-0xfa000fff]
[ 0.303593] pci 0000:37:05.0: supports D1 D2
[ 0.303594] pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.303662] pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode)
[ 0.303667] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.303672] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.303674] pci 0000:00:1e.0: bridge window [io 0x0d00-0xefff window] (subtractive decode)
[ 0.303675] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.303677] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff window] (subtractive decode)
[ 0.303678] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfaffffff window] (subtractive decode)
[ 0.303680] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode)
[ 0.303681] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.304152] ACPI: PCI: Interrupt link LNKA configured for IRQ 5
[ 0.304227] ACPI: PCI: Interrupt link LNKB configured for IRQ 7
[ 0.304299] ACPI: PCI: Interrupt link LNKC configured for IRQ 7
[ 0.304370] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[ 0.304442] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[ 0.304513] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.304585] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ 0.304656] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.304658] ACPI: PCI: Interrupt link LNKH disabled
[ 0.304757] ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f])
[ 0.304762] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.304766] acpi PNP0A08:02: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[ 0.304822] PCI host bridge to bus 0000:3f
[ 0.304824] pci_bus 0000:3f: root bus resource [bus 3f]
[ 0.304831] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
[ 0.304876] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
[ 0.306603] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
[ 0.306603] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
[ 0.306603] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
[ 0.306603] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
[ 0.306603] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.306603] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
[ 0.306603] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
[ 0.306603] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
[ 0.306603] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
[ 0.306603] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
[ 0.306603] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
[ 0.306603] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.306603] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.306603] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
[ 0.306603] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
[ 0.306603] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
[ 0.306603] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
[ 0.306625] iommu: Default domain type: Translated
[ 0.306774] SCSI subsystem initialized
[ 0.306784] libata version 3.00 loaded.
[ 0.306784] pci 0000:0f:00.0: vgaarb: setting as boot VGA device
[ 0.306784] pci 0000:0f:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.306784] pci 0000:0f:00.0: vgaarb: bridge control possible
[ 0.306784] vgaarb: loaded
[ 0.306784] ACPI: bus type USB registered
[ 0.306784] usbcore: registered new interface driver usbfs
[ 0.306784] usbcore: registered new interface driver hub
[ 0.306784] usbcore: registered new device driver usb
[ 0.306784] pps_core: LinuxPPS API ver. 1 registered
[ 0.306784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.306784] PTP clock support registered
[ 0.306784] EDAC MC: Ver: 3.0.0
[ 0.306784] NetLabel: Initializing
[ 0.306784] NetLabel: domain hash size = 128
[ 0.306784] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.306784] NetLabel: unlabeled traffic allowed by default
[ 0.306784] PCI: Using ACPI for IRQ routing
[ 0.307821] PCI: pci_cache_line_size set to 64 bytes
[ 0.307889] e820: reserve RAM buffer [mem 0x00095800-0x0009ffff]
[ 0.307891] e820: reserve RAM buffer [mem 0xdefa5800-0xdfffffff]
[ 0.307896] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.307896] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.307896] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.310646] clocksource: Switched to clocksource tsc-early
[ 0.320296] VFS: Disk quotas dquot_6.6.0
[ 0.320317] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.320432] AppArmor: AppArmor Filesystem Enabled
[ 0.320462] pnp: PnP ACPI init
[ 0.320540] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.320568] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.320591] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.320862] pnp 00:03: [dma 2]
[ 0.320888] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.321170] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321222] system 00:05: [io 0x0400-0x041f] has been reserved
[ 0.321225] system 00:05: [io 0x0420-0x043f] has been reserved
[ 0.321227] system 00:05: [io 0x0440-0x045f] has been reserved
[ 0.321228] system 00:05: [io 0x0460-0x047f] has been reserved
[ 0.321230] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.321232] system 00:05: [io 0xf800-0xf81f] has been reserved
[ 0.321233] system 00:05: [io 0xf820-0xf83f] has been reserved
[ 0.321235] system 00:05: [io 0xf840-0xf85f] has been reserved
[ 0.321237] system 00:05: [io 0xf860-0xf87f] has been reserved
[ 0.321238] system 00:05: [io 0xfa00-0xfa3f] has been reserved
[ 0.321240] system 00:05: [io 0xfc00-0xfc7f] has been reserved
[ 0.321241] system 00:05: [io 0xfc80-0xfcff] has been reserved
[ 0.321243] system 00:05: [io 0xfe00-0xfe7f] has been reserved
[ 0.321245] system 00:05: [io 0xfe80-0xfeff] has been reserved
[ 0.321250] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321308] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.321311] system 00:06: [io 0x4700-0x470b] has been reserved
[ 0.321316] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321736] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.321740] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.321742] system 00:07: [mem 0x000e8000-0x000fffff] could not be reserved
[ 0.321743] system 00:07: [mem 0xfec01000-0xfecfffff] could not be reserved
[ 0.321745] system 00:07: [mem 0xfed00000-0xfed3ffff] could not be reserved
[ 0.321747] system 00:07: [mem 0xfed40000-0xffffffff] could not be reserved
[ 0.321749] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.321750] system 00:07: [mem 0x000da400-0x000e7fff] has been reserved
[ 0.321756] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.321767] pnp: PnP ACPI: found 8 devices
[ 0.327489] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.327552] NET: Registered protocol family 2
[ 0.327807] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.329770] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.329907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.330170] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.330268] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.330414] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.330500] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.330564] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.330639] NET: Registered protocol family 1
[ 0.330644] NET: Registered protocol family 44
[ 0.330658] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000
[ 0.330662] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000 add_align 100000
[ 0.330664] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000 add_align 100000
[ 0.330667] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.330669] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.330682] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.330684] pci 0000:00:1f.0: BAR 14: [io size 0x0040] has bogus alignment
[ 0.330689] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf7100000-0xf72fffff]
[ 0.330693] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf7300000-0xf74fffff 64bit pref]
[ 0.330696] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf7500000-0xf76fffff 64bit pref]
[ 0.330699] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.330700] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.330703] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.330707] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.330713] pci 0000:0f:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.330715] pci 0000:0f:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.330717] pci 0000:00:03.0: PCI bridge to [bus 0f]
[ 0.330719] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.330722] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.330725] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.330729] pci 0000:00:07.0: PCI bridge to [bus 28]
[ 0.330737] pci 0000:00:1c.0: PCI bridge to [bus 1c]
[ 0.330739] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.330742] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf72fffff]
[ 0.330745] pci 0000:00:1c.0: bridge window [mem 0xf7300000-0xf74fffff 64bit pref]
[ 0.330750] pci 0000:00:1c.5: PCI bridge to [bus 01]
[ 0.330752] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.330756] pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.330759] pci 0000:00:1c.5: bridge window [mem 0xf7500000-0xf76fffff 64bit pref]
[ 0.330764] pci 0000:00:1e.0: PCI bridge to [bus 37]
[ 0.330767] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.330774] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.330776] pci_bus 0000:00: resource 5 [io 0x0d00-0xefff window]
[ 0.330777] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.330778] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xefffffff window]
[ 0.330780] pci_bus 0000:00: resource 8 [mem 0xf4000000-0xfaffffff window]
[ 0.330781] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed003ff window]
[ 0.330783] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
[ 0.330784] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff]
[ 0.330786] pci_bus 0000:0f: resource 0 [io 0xe000-0xefff]
[ 0.330787] pci_bus 0000:0f: resource 1 [mem 0xf4000000-0xf6ffffff]
[ 0.330789] pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.330790] pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff]
[ 0.330792] pci_bus 0000:1c: resource 1 [mem 0xf7100000-0xf72fffff]
[ 0.330793] pci_bus 0000:1c: resource 2 [mem 0xf7300000-0xf74fffff 64bit pref]
[ 0.330795] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.330796] pci_bus 0000:01: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.330797] pci_bus 0000:01: resource 2 [mem 0xf7500000-0xf76fffff 64bit pref]
[ 0.330799] pci_bus 0000:37: resource 1 [mem 0xfa000000-0xfa0fffff]
[ 0.330801] pci_bus 0000:37: resource 4 [io 0x0000-0x0cf7 window]
[ 0.330802] pci_bus 0000:37: resource 5 [io 0x0d00-0xefff window]
[ 0.330803] pci_bus 0000:37: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.330805] pci_bus 0000:37: resource 7 [mem 0xe0000000-0xefffffff window]
[ 0.330806] pci_bus 0000:37: resource 8 [mem 0xf4000000-0xfaffffff window]
[ 0.330808] pci_bus 0000:37: resource 9 [mem 0xfed00000-0xfed003ff window]
[ 0.330809] pci_bus 0000:37: resource 10 [mem 0xfed40000-0xfed44fff window]
[ 0.332985] pci 0000:0f:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.333020] PCI: CLS 64 bytes, default 64
[ 0.333036] DMAR: Host address width 39
[ 0.333037] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.333046] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
[ 0.333048] DMAR: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
[ 0.333050] DMAR: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
[ 0.333051] DMAR: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
[ 0.333052] DMAR: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
[ 0.333053] DMAR: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
[ 0.333054] DMAR: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
[ 0.333055] DMAR: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
[ 0.333056] DMAR: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
[ 0.333057] DMAR: ATSR flags: 0x0
[ 0.333075] Trying to unpack rootfs image as initramfs...
[ 0.333075] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.333076] software IO TLB: mapped [mem 0x00000000dafa5000-0x00000000defa5000] (64MB)
[ 0.333609] Initialise system trusted keyrings
[ 0.333620] Key type blacklist registered
[ 0.333650] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.334820] zbud: loaded
[ 0.335109] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.335282] fuse: init (API version 7.34)
[ 0.335427] integrity: Platform Keyring initialized
[ 0.344198] Key type asymmetric registered
[ 0.344204] Asymmetric key parser 'x509' registered
[ 0.344220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.344258] io scheduler mq-deadline registered
[ 0.344992] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.345050] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.345052] vesafb: scrolling: redraw
[ 0.345053] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.345069] vesafb: framebuffer at 0xf5000000, mapped to 0x(____ptrval____), using 5632k, total 5632k
[ 0.345111] fbcon: Deferring console take-over
[ 0.345112] fb0: VESA VGA frame buffer device
[ 0.345190] Monitor-Mwait will be used to enter C-1 state
[ 0.345197] Monitor-Mwait will be used to enter C-2 state
[ 0.345202] Monitor-Mwait will be used to enter C-3 state
[ 0.345205] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.348110] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.348161] ACPI: button: Power Button [PBTN]
[ 0.348199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.348224] ACPI: button: Power Button [PWRF]
[ 0.349396] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.352182] Linux agpgart interface v0.103
[ 0.484205] Freeing initrd memory: 61668K
[ 0.593414] loop: module loaded
[ 0.594102] libphy: Fixed MDIO Bus: probed
[ 0.594104] tun: Universal TUN/TAP device driver, 1.6
[ 0.594282] PPP generic driver version 2.4.2
[ 0.594607] VFIO - User Level meta-driver version: 0.3
[ 0.594840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.594845] ehci-pci: EHCI PCI platform driver
[ 0.595062] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.595068] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.595079] ehci-pci 0000:00:1a.7: debug port 1
[ 0.598978] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf8004800
[ 0.613388] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.613459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 0.613464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.613468] usb usb1: Product: EHCI Host Controller
[ 0.613470] usb usb1: Manufacturer: Linux 5.13.0-39-generic ehci_hcd
[ 0.613473] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.613751] hub 1-0:1.0: USB hub found
[ 0.613767] hub 1-0:1.0: 6 ports detected
[ 0.614092] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.614097] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.614107] ehci-pci 0000:00:1d.7: debug port 1
[ 0.618015] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf8004c00
[ 0.633386] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.633456] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 0.633461] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.633465] usb usb2: Product: EHCI Host Controller
[ 0.633467] usb usb2: Manufacturer: Linux 5.13.0-39-generic ehci_hcd
[ 0.633470] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.633732] hub 2-0:1.0: USB hub found
[ 0.633746] hub 2-0:1.0: 6 ports detected
[ 0.633911] ehci-platform: EHCI generic platform driver
[ 0.633919] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.633924] ohci-pci: OHCI PCI platform driver
[ 0.633935] ohci-platform: OHCI generic platform driver
[ 0.633941] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.634090] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.634096] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.634102] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.634121] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000d000
[ 0.634163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.634165] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.634167] usb usb3: Product: UHCI Host Controller
[ 0.634168] usb usb3: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.634169] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.634411] hub 3-0:1.0: USB hub found
[ 0.634432] hub 3-0:1.0: 2 ports detected
[ 0.634690] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.634696] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.634701] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.634723] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d020
[ 0.634768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.634770] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.634772] usb usb4: Product: UHCI Host Controller
[ 0.634773] usb usb4: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.634774] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.635016] hub 4-0:1.0: USB hub found
[ 0.635031] hub 4-0:1.0: 2 ports detected
[ 0.635286] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.635291] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.635297] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.635313] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000d040
[ 0.635352] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.635354] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.635356] usb usb5: Product: UHCI Host Controller
[ 0.635357] usb usb5: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.635358] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.635614] hub 5-0:1.0: USB hub found
[ 0.635634] hub 5-0:1.0: 2 ports detected
[ 0.635891] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.635896] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.635902] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.635918] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d060
[ 0.635957] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.635959] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.635960] usb usb6: Product: UHCI Host Controller
[ 0.635962] usb usb6: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.635963] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.636231] hub 6-0:1.0: USB hub found
[ 0.636246] hub 6-0:1.0: 2 ports detected
[ 0.636506] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.636512] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.636517] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.636533] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000d080
[ 0.636572] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.636575] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.636576] usb usb7: Product: UHCI Host Controller
[ 0.636577] usb usb7: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.636579] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.636831] hub 7-0:1.0: USB hub found
[ 0.636851] hub 7-0:1.0: 2 ports detected
[ 0.637102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.637109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.637115] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.637131] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000d0a0
[ 0.637174] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
[ 0.637176] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.637178] usb usb8: Product: UHCI Host Controller
[ 0.637179] usb usb8: Manufacturer: Linux 5.13.0-39-generic uhci_hcd
[ 0.637180] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.637364] hub 8-0:1.0: USB hub found
[ 0.637370] hub 8-0:1.0: 2 ports detected
[ 0.637499] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.640238] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.640243] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.640416] mousedev: PS/2 mouse device common for all mice
[ 0.640895] rtc_cmos 00:00: RTC can wake from S4
[ 0.641168] rtc_cmos 00:00: registered as rtc0
[ 0.641318] rtc_cmos 00:00: setting system clock to 2022-04-09T06:55:28 UTC (1649487328)
[ 0.641334] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.641345] i2c /dev entries driver
[ 0.641726] device-mapper: uevent: version 1.0.3
[ 0.641862] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.641881] platform eisa.0: Probing EISA bus 0
[ 0.641887] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.641888] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.641890] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.641891] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.641892] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.641893] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.641895] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.641896] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.641897] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.641898] platform eisa.0: EISA: Detected 0 cards
[ 0.641900] intel_pstate: CPU model not supported
[ 0.642113] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.642178] drop_monitor: Initializing network drop monitor service
[ 0.642322] NET: Registered protocol family 10
[ 0.649620] Segment Routing with IPv6
[ 0.649641] NET: Registered protocol family 17
[ 0.649800] Key type dns_resolver registered
[ 0.650497] microcode: sig=0x106a5, pf=0x2, revision=0x1d
[ 0.650701] microcode: Microcode Update Driver: v2.2.
[ 0.650705] IPI shorthand broadcast: enabled
[ 0.650715] sched_clock: Marking stable (650512127, 185301)->(655918850, -5221422)
[ 0.650999] registered taskstats version 1
[ 0.651010] Loading compiled-in X.509 certificates
[ 0.652162] Loaded X.509 cert 'Build time autogenerated kernel key: 047b11e36e8d8f22bbe5cf684b1809703caeafe3'
[ 0.652861] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.653687] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.653689] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.653708] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.654247] zswap: loaded using pool lzo/zbud
[ 0.654831] Key type ._fscrypt registered
[ 0.654835] Key type .fscrypt registered
[ 0.654836] Key type fscrypt-provisioning registered
[ 0.658953] Key type encrypted registered
[ 0.658961] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.658971] ima: No TPM chip found, activating TPM-bypass!
[ 0.658977] Loading compiled-in module X.509 certificates
[ 0.659770] Loaded X.509 cert 'Build time autogenerated kernel key: 047b11e36e8d8f22bbe5cf684b1809703caeafe3'
[ 0.659773] ima: Allocated hash algorithm: sha1
[ 0.659780] ima: No architecture policies found
[ 0.659790] evm: Initialising EVM extended attributes:
[ 0.659790] evm: security.selinux
[ 0.659791] evm: security.SMACK64
[ 0.659792] evm: security.SMACK64EXEC
[ 0.659792] evm: security.SMACK64TRANSMUTE
[ 0.659793] evm: security.SMACK64MMAP
[ 0.659794] evm: security.apparmor
[ 0.659794] evm: security.ima
[ 0.659795] evm: security.capability
[ 0.659795] evm: HMAC attrs: 0x1
[ 0.660312] PM: Magic number: 2:189:923
[ 0.662141] RAS: Correctable Errors collector initialized.
[ 0.664473] Freeing unused decrypted memory: 2036K
[ 0.664991] Freeing unused kernel image (initmem) memory: 2896K
[ 0.672136] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.705401] Write protecting the kernel read-only data: 30720k
[ 0.706216] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.706762] Freeing unused kernel image (rodata/data gap) memory: 1792K
[ 0.754604] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.754709] x86/mm: Checking user space page tables
[ 0.800621] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.800627] Run /init as init process
[ 0.800629] with arguments:
[ 0.800630] /init
[ 0.800631] splash
[ 0.800631] with environment:
[ 0.800632] HOME=/
[ 0.800633] TERM=linux
[ 0.800633] BOOT_IMAGE=/boot/vmlinuz-5.13.0-39-generic
[ 0.917518] ahci 0000:00:1f.2: version 3.0
[ 0.917679] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 0.917763] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 0.917767] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
[ 0.923733] scsi host0: ahci
[ 0.924822] scsi host1: ahci
[ 0.925011] scsi host2: ahci
[ 0.925125] scsi host3: ahci
[ 0.927237] FDC 0 is a post-1991 82077
[ 0.931726] scsi host4: ahci
[ 0.932030] scsi host5: ahci
[ 0.932083] ata1: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004100 irq 27
[ 0.932086] ata2: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004180 irq 27
[ 0.932088] ata3: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004200 irq 27
[ 0.932090] ata4: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004280 irq 27
[ 0.932092] ata5: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004300 irq 27
[ 0.932094] ata6: SATA max UDMA/133 abar m2048@0xf8004000 port 0xf8004380 irq 27
[ 0.956392] gpio_ich gpio_ich.2.auto: GPIO from 451 to 511
[ 0.977391] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.009386] firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.149081] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address d8:d3:85:75:d3:33
[ 1.149086] tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.149088] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.149090] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.150113] tg3 0000:01:00.0 enp1s0: renamed from eth0
[ 1.158793] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 1.172382] random: fast init done
[ 1.255386] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.255536] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.334723] tsc: Refined TSC clocksource calibration: 3066.675 MHz
[ 1.334733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c344f3183b, max_idle_ns: 440795326095 ns
[ 1.334828] clocksource: Switched to clocksource tsc
[ 1.335228] usb 5-2: New USB device found, idVendor=0bda, idProduct=8771, bcdDevice= 2.00
[ 1.335235] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.335239] usb 5-2: Product: Bluetooth Radio
[ 1.335241] usb 5-2: Manufacturer: Realtek
[ 1.335244] usb 5-2: SerialNumber: 00E04C239987
[ 1.340379] usb 2-1: New USB device found, idVendor=03f0, idProduct=e207, bcdDevice=10.21
[ 1.340385] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 1.340389] usb 2-1: Product: HP Webcam HD 2300
[ 1.340391] usb 2-1: Manufacturer: Hewlett Packard
[ 1.414819] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.414838] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.414868] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.414888] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.417066] ata4.00: ATAPI: TSSTcorp CDDVDW TS-H653Q, HC01, max UDMA/100
[ 1.417686] ata3.00: ATA-8: ST500DM002-1BD142, KC66, max UDMA/100
[ 1.417692] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
[ 1.418176] ata2.00: ATAPI: hp DVD-RAM GH40L, RB12, max UDMA/100
[ 1.419337] ata3.00: configured for UDMA/100
[ 1.419550] ata4.00: configured for UDMA/100
[ 1.422092] ata1.00: ATA-8: WDC WD3000HLFS-60G6U2, 04.04V05, max UDMA/100
[ 1.422098] ata1.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.422755] ata2.00: configured for UDMA/100
[ 1.430083] ata1.00: configured for UDMA/100
[ 1.430301] scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-6 4V05 PQ: 0 ANSI: 5
[ 1.430684] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 1.430703] sd 0:0:0:0: [sda] Write Protect is off
[ 1.430707] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.430718] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.430734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.434291] scsi 1:0:0:0: CD-ROM hp DVD-RAM GH40L RB12 PQ: 0 ANSI: 5
[ 1.462754] sda: sda1 sda2 sda3
[ 1.474813] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 1.496410] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.496416] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.510796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.526943] firewire_core 0000:37:05.0: created device fw0: GUID 0060b000002c95d4, S400
[ 1.676520] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.00
[ 1.676527] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.676530] usb 2-2: Product: USB3.0 External HDD
[ 1.676533] usb 2-2: Manufacturer: JMicron
[ 1.676535] usb 2-2: SerialNumber: 0000AB1235A9
[ 1.685868] usbcore: registered new interface driver usb-storage
[ 1.686412] hid: raw HID events driver (C) Jiri Kosina
[ 1.688881] scsi host6: uas
[ 1.689011] usbcore: registered new interface driver uas
[ 1.689963] scsi 6:0:0:0: Direct-Access ST500LM0 21-1KJ152 8101 PQ: 0 ANSI: 6
[ 1.690500] usbcore: registered new interface driver usbhid
[ 1.690502] usbhid: USB HID core driver
[ 1.691949] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.693253] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.693255] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 1.693351] hid-generic 0003:03F0:E207.0001: hiddev0,hidraw0: USB HID v1.11 Device [Hewlett Packard HP Webcam HD 2300] on usb-0000:00:1d.7-1/input4
[ 1.693497] sd 6:0:0:0: [sdb] Write Protect is off
[ 1.693500] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[ 1.694124] sd 6:0:0:0: [sdb] Disabling FUA
[ 1.694127] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.694500] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1.770820] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.770943] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.771304] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC66 PQ: 0 ANSI: 5
[ 1.771680] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.771685] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.771698] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.771702] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.771705] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 1.771723] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.772791] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Q HC01 PQ: 0 ANSI: 5
[ 1.830160] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.834372] sdc: sdc1 < sdc5 sdc6 > sdc2
[ 1.866789] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.871661] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.894777] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 1.894969] sr 3:0:0:0: Attached scsi generic sg4 type 5
[ 2.045680] sdb: sdb1
[ 2.062122] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.804943] fbcon: Taking over console
[ 2.805043] Console: switching to colour frame buffer device 200x56
[ 2.917090] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.467388] random: crng init done
[ 4.516252] systemd[1]: Inserted module 'autofs4'
[ 4.776277] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.794822] systemd[1]: Detected architecture x86-64.
[ 4.825806] systemd[1]: Set hostname to <jeanmarie-HP-Z400-Workstation>.
[ 9.851527] systemd[1]: Created slice system-modprobe.slice.
[ 9.851789] systemd[1]: Created slice system-postfix.slice.
[ 9.852083] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.852344] systemd[1]: Created slice User and Session Slice.
[ 9.852408] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.852588] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.852637] systemd[1]: Reached target User and Group Name Lookups.
[ 9.852651] systemd[1]: Reached target Remote File Systems.
[ 9.852662] systemd[1]: Reached target Slices.
[ 9.852779] systemd[1]: Listening on Syslog Socket.
[ 9.852873] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.852932] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.853124] systemd[1]: Listening on Journal Audit Socket.
[ 9.853216] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.853331] systemd[1]: Listening on Journal Socket.
[ 9.853443] systemd[1]: Listening on udev Control Socket.
[ 9.853515] systemd[1]: Listening on udev Kernel Socket.
[ 9.854389] systemd[1]: Mounting Huge Pages File System...
[ 9.855326] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.856325] systemd[1]: Mounting Kernel Debug File System...
[ 9.857304] systemd[1]: Mounting Kernel Trace File System...
[ 9.858723] systemd[1]: Starting Journal Service...
[ 9.859777] systemd[1]: Starting Set the console keyboard layout...
[ 9.860743] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 9.861715] systemd[1]: Starting Load Kernel Module drm...
[ 9.991163] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.991240] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 10.014194] systemd[1]: Starting Load Kernel Modules...
[ 10.015417] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.016665] systemd[1]: Starting udev Coldplug all Devices...
[ 10.017728] systemd[1]: Starting Uncomplicated firewall...
[ 10.019838] systemd[1]: Mounted Huge Pages File System.
[ 10.020029] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.020201] systemd[1]: Mounted Kernel Debug File System.
[ 10.020372] systemd[1]: Mounted Kernel Trace File System.
[ 10.021044] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 10.021487] systemd[1]: modprobe@drm.service: Succeeded.
[ 10.021949] systemd[1]: Finished Load Kernel Module drm.
[ 10.169596] EXT4-fs (sdc6): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 10.171430] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.172529] systemd[1]: Activating swap /swapfile...
[ 10.405815] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 10.405920] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 10.407619] systemd[1]: Starting Load/Save Random Seed...
[ 10.408954] systemd[1]: Starting Create System Users...
[ 10.409234] systemd[1]: Started Journal Service.
[ 10.418827] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 10.550533] systemd-journald[288]: Received client request to flush runtime journal.
[ 10.564146] lp: driver loaded but no devices found
[ 10.721773] ppdev: user-space parallel port driver
[ 11.342551] IPMI message handler: version 39.2
[ 11.385946] ipmi device interface
[ 11.511804] loop0: detected capacity change from 0 to 8
[ 11.575041] loop1: detected capacity change from 0 to 441064
[ 11.603164] loop2: detected capacity change from 0 to 441048
[ 11.688473] loop3: detected capacity change from 0 to 113680
[ 11.735997] loop4: detected capacity change from 0 to 10672
[ 11.763157] loop5: detected capacity change from 0 to 126760
[ 11.812535] loop6: detected capacity change from 0 to 126760
[ 11.827429] loop7: detected capacity change from 0 to 113696
[ 11.915095] loop8: detected capacity change from 0 to 801328
[ 11.971008] loop9: detected capacity change from 0 to 337424
[ 12.003071] loop10: detected capacity change from 0 to 133552
[ 12.054974] loop11: detected capacity change from 0 to 430312
[ 12.087088] loop12: detected capacity change from 0 to 133320
[ 12.138950] loop13: detected capacity change from 0 to 509456
[ 12.187044] loop14: detected capacity change from 0 to 448512
[ 12.238875] loop15: detected capacity change from 0 to 448512
[ 12.323115] loop16: detected capacity change from 0 to 778792
[ 12.383108] loop17: detected capacity change from 0 to 311600
[ 12.471128] loop18: detected capacity change from 0 to 779112
[ 12.555035] loop19: detected capacity change from 0 to 312088
[ 12.603011] loop20: detected capacity change from 0 to 879712
[ 12.655010] loop21: detected capacity change from 0 to 104360
[ 12.686721] loop22: detected capacity change from 0 to 111080
[ 12.738839] loop23: detected capacity change from 0 to 894848
[ 12.795105] loop24: detected capacity change from 0 to 89352
[ 12.878958] loop25: detected capacity change from 0 to 605624
[ 12.955131] loop26: detected capacity change from 0 to 91416
[ 15.781674] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
[ 15.781699] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 15.781715] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 16.343852] Bluetooth: Core ver 2.22
[ 16.343874] NET: Registered protocol family 31
[ 16.343876] Bluetooth: HCI device and connection manager initialized
[ 16.343880] Bluetooth: HCI socket layer initialized
[ 16.343881] Bluetooth: L2CAP socket layer initialized
[ 16.343884] Bluetooth: SCO socket layer initialized
[ 16.372138] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.372518] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.749665] mc: Linux media interface: v0.10
[ 16.760652] Intel(R) Wireless WiFi driver for Linux
[ 16.810598] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm
[ 17.110087] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 17.453228] usbcore: registered new interface driver btusb
[ 17.456130] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[ 17.458122] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 17.458125] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761b_fw.bin
[ 17.560988] videodev: Linux video capture interface: v2.00
[ 17.570019] usb 2-1: current rate 48000 is different from the runtime rate 8000
[ 17.573491] usb 2-1: current rate 48000 is different from the runtime rate 16000
[ 17.577227] usb 2-1: current rate 48000 is different from the runtime rate 44100
[ 17.584351] usb 2-1: current rate 48000 is different from the runtime rate 8000
[ 17.587723] usb 2-1: current rate 48000 is different from the runtime rate 16000
[ 17.591634] usb 2-1: current rate 48000 is different from the runtime rate 44100
[ 17.603444] usbcore: registered new interface driver snd-usb-audio
[ 18.462373] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 18.481009] iwlwifi 0000:03:00.0: base HW address: 48:51:b7:84:4a:90
[ 18.689719] iwlwifi 0000:03:00.0: iwlmvm doesn't allow to disable HW crypto, check swcrypto module parameter
[ 18.689731] iwlwifi 0000:03:00.0: iwlmvm doesn't allow to disable BT Coex, check bt_coex_active module parameter
[ 18.689957] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 18.864302] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 19.108661] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761b_config.bin
[ 19.137750] Bluetooth: hci0: RTL: cfg_sz 14, total sz 11678
[ 19.225241] Bluetooth: hci0: RTL: fw version 0x097bec43
[ 20.266989] iwlwifi 0000:03:00.0 wls1: renamed from wlan0
[ 20.718093] usb 2-1: Found UVC 1.00 device HP Webcam HD 2300 (03f0:e207)
[ 20.737566] input: HP Webcam HD 2300: HP Webcam HD as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input6
[ 20.737717] usbcore: registered new interface driver uvcvideo
[ 20.777888] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 20.778283] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 20.778288] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 20.778291] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 20.778294] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.778295] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.778297] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 20.778300] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 20.778302] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 20.791264] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 20.791335] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 20.791398] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 20.791461] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 20.791525] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.499118] checking generic (f5000000 580000) vs hw (f6000000 1000000)
[ 21.499125] checking generic (f5000000 580000) vs hw (e0000000 10000000)
[ 21.499128] checking generic (f5000000 580000) vs hw (f4000000 2000000)
[ 21.499130] fb0: switching to nouveaufb from VESA VGA
[ 21.499413] Console: switching to colour dummy device 80x25
[ 21.499480] nouveau 0000:0f:00.0: vgaarb: deactivate vga console
[ 21.499604] nouveau 0000:0f:00.0: NVIDIA G94 (094c00a1)
[ 21.625609] nouveau 0000:0f:00.0: bios: version 62.94.90.00.0d
[ 21.647990] nouveau 0000:0f:00.0: fb: 768 MiB GDDR3
[ 21.837835] adt7475 2-002e: Error configuring pwm polarity
[ 21.837882] adt7475 2-002e: ADT7473 device, revision 1
[ 21.925828] nouveau 0000:0f:00.0: DRM: VRAM: 768 MiB
[ 21.925831] nouveau 0000:0f:00.0: DRM: GART: 1048576 MiB
[ 21.925834] nouveau 0000:0f:00.0: DRM: TMDS table version 2.0
[ 21.925836] nouveau 0000:0f:00.0: DRM: DCB version 4.0
[ 21.925838] nouveau 0000:0f:00.0: DRM: DCB outp 00: 02000300 00000028
[ 21.925840] nouveau 0000:0f:00.0: DRM: DCB outp 01: 01000302 00020030
[ 21.925841] nouveau 0000:0f:00.0: DRM: DCB outp 02: 02011386 0f200010
[ 21.925843] nouveau 0000:0f:00.0: DRM: DCB outp 03: 02011332 00020010
[ 21.925845] nouveau 0000:0f:00.0: DRM: DCB outp 04: 040223a6 0f200010
[ 21.925846] nouveau 0000:0f:00.0: DRM: DCB outp 05: 04022342 00020010
[ 21.925848] nouveau 0000:0f:00.0: DRM: DCB conn 00: 00001030
[ 21.925849] nouveau 0000:0f:00.0: DRM: DCB conn 01: 00050146
[ 21.925851] nouveau 0000:0f:00.0: DRM: DCB conn 02: 000a0246
[ 21.928567] nouveau 0000:0f:00.0: DRM: MM: using CRYPT for buffer copies
[ 22.127440] nouveau 0000:0f:00.0: DRM: allocated 1600x900 fb: 0x50000, bo 000000001ee02dfc
[ 22.130896] fbcon: nouveaudrmfb (fb0) is primary device
[ 22.130962] Console: switching to colour frame buffer device 200x56
[ 22.130995] nouveau 0000:0f:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 22.171146] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0f:00.0 on minor 0
[ 27.067405] audit: type=1400 audit(1649487354.921:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=814 comm="apparmor_parser"
[ 27.067415] audit: type=1400 audit(1649487354.921:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=814 comm="apparmor_parser"
[ 27.118113] audit: type=1400 audit(1649487354.969:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=813 comm="apparmor_parser"
[ 27.127786] audit: type=1400 audit(1649487354.981:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=819 comm="apparmor_parser"
[ 27.177916] audit: type=1400 audit(1649487355.029:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=820 comm="apparmor_parser"
[ 27.210633] audit: type=1400 audit(1649487355.061:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=818 comm="apparmor_parser"
[ 27.323875] audit: type=1400 audit(1649487355.177:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=823 comm="apparmor_parser"
[ 27.359948] audit: type=1400 audit(1649487355.213:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=824 comm="apparmor_parser"
[ 27.359959] audit: type=1400 audit(1649487355.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=824 comm="apparmor_parser"
[ 27.359964] audit: type=1400 audit(1649487355.213:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=824 comm="apparmor_parser"
[ 34.425371] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.425375] Bluetooth: BNEP filters: protocol multicast
[ 34.425378] Bluetooth: BNEP socket layer initialized
[ 34.574426] NET: Registered protocol family 38
[ 40.741304] kauditd_printk_skb: 57 callbacks suppressed
[ 40.741307] audit: type=1400 audit(1649487368.593:69): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1001 comm="cups-browsed" capability=23 capname="sys_nice"
[ 46.725798] wls1: authenticate with cc:2d:1b:6d:3b:7d
[ 46.728728] wls1: send auth to cc:2d:1b:6d:3b:7d (try 1/3)
[ 46.729682] wls1: authenticated
[ 46.734690] wls1: associate with cc:2d:1b:6d:3b:7d (try 1/3)
[ 46.738339] wls1: RX AssocResp from cc:2d:1b:6d:3b:7d (capab=0x11 status=0 aid=1)
[ 46.742778] wls1: associated
[ 46.982761] wls1: Limiting TX power to 23 (23 - 0) dBm as advertised by cc:2d:1b:6d:3b:7d
[ 47.002819] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 48.606911] loop27: detected capacity change from 0 to 8
[ 50.512238] audit: type=1400 audit(1649487378.365:70): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1034 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 50.768841] audit: type=1400 audit(1649487378.621:71): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1033 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 50.993419] audit: type=1400 audit(1649487378.845:72): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1033 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.052034] audit: type=1400 audit(1649487378.905:73): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1252 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.324013] audit: type=1400 audit(1649487379.177:74): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1279 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.325103] audit: type=1400 audit(1649487379.177:75): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1278 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 51.325271] audit: type=1400 audit(1649487379.177:76): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1278 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.574999] audit: type=1400 audit(1649487379.429:77): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1330 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.577139] audit: type=1400 audit(1649487379.429:78): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1329 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 51.577319] audit: type=1400 audit(1649487379.429:79): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1329 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 107.028023] loop27: detected capacity change from 0 to 777120
[ 109.224705] rfkill: input handler disabled
[ 128.910075] rfkill: input handler enabled
[ 128.939283] Bluetooth: RFCOMM TTY layer initialized
[ 128.939290] Bluetooth: RFCOMM socket layer initialized
[ 128.939298] Bluetooth: RFCOMM ver 1.11
[ 144.753773] rfkill: input handler disabled
[ 146.672223] kauditd_printk_skb: 8 callbacks suppressed
[ 146.672227] audit: type=1400 audit(1649487474.021:88): apparmor="DENIED" operation="capable" profile="/snap/snapd/15177/usr/lib/snapd/snap-confine" pid=2697 comm="snap-confine" capability=4 capname="fsetid"
[ 156.854838] audit: type=1326 audit(1649487484.201:89): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2697 comm="snap-store" exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f87b799976d code=0x50000
[ 164.274117] audit: type=1107 audit(1649487491.621:90): pid=886 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=2697 label="snap.snap-store.ubuntu-software" peer_pid=914 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 164.274647] audit: type=1107 audit(1649487491.621:91): pid=886 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=2697 label="snap.snap-store.ubuntu-software" peer_pid=914 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 164.527141] audit: type=1107 audit(1649487491.874:92): pid=886 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=2697 label="snap.snap-store.ubuntu-software" peer_pid=914 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 164.527803] audit: type=1107 audit(1649487491.874:93): pid=886 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=2697 label="snap.snap-store.ubuntu-software" peer_pid=914 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 166.232029] audit: type=1400 audit(1649487493.578:94): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=2697 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 210.154106] audit: type=1400 audit(1649487537.503:95): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2697 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 210.191667] audit: type=1400 audit(1649487537.539:96): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2697 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 210.749986] audit: type=1326 audit(1649487538.099:97): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2697 comm="pool-org.gnome." exe="/snap/snap-store/558/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f87b79903cb code=0x50000
[ 658.260696] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 866.062886] perf: interrupt took too long (3254 > 3132), lowering kernel.perf_event_max_sample_rate to 61250
jean-marie@jeanmarie-HP-Z400-Workstation:~$ Hors ligne
#82 Le 09/04/2022, à 09:26
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
[ 50.512238] audit: type=1400 audit(1649487378.365:70): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1034 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 50.768841] audit: type=1400 audit(1649487378.621:71): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1033 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 50.993419] audit: type=1400 audit(1649487378.845:72): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1033 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.052034] audit: type=1400 audit(1649487378.905:73): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1252 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.324013] audit: type=1400 audit(1649487379.177:74): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1279 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.325103] audit: type=1400 audit(1649487379.177:75): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1278 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 51.325271] audit: type=1400 audit(1649487379.177:76): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1278 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.574999] audit: type=1400 audit(1649487379.429:77): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1330 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[ 51.577139] audit: type=1400 audit(1649487379.429:78): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1329 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create"
[ 51.577319] audit: type=1400 audit(1649487379.429:79): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1329 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0@Nuliel
Remplacer les snaps par des deb ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#83 Le 09/04/2022, à 09:29
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
????
Hors ligne
#84 Le 09/04/2022, à 09:32
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Je posais une question à Nuliel.
C'est relatif à un débat sans fin > Rubrique Snap.
_ _ _
(edit=messages regroupés)
_ _ _
Montre :
snap list --allDernière modification par xubu1957 (Le 09/04/2022, à 10:03)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#85 Le 09/04/2022, à 09:46
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
jean-marie@jeanmarie-HP-Z400-Workstation:~$ snap list --all
Nom Version Révision Suivi Éditeur Notes
bare 1.0 5 latest/stable canonical✓ base
blender 3.1.1 2090 latest/stable blenderfoundation✓ désactivé,classic
blender 3.1.2 2106 latest/stable blenderfoundation✓ classic
bluez 5.53-6 302 20/stable canonical✓ -
core18 20211215 2284 latest/stable canonical✓ base,désactivé
core18 20220309 2344 latest/stable canonical✓ base
core20 20220304 1376 latest/stable canonical✓ base,désactivé
core20 20220318 1405 latest/stable canonical✓ base
eclipse 2019-12 48 latest/stable snapcrafters classic
gimp 2.10.28 383 latest/stable snapcrafters -
gnome-3-28-1804 3.28.0-19-g98f9e67.98f9e67 161 latest/stable canonical✓ -
gnome-3-34-1804 0+git.3556cb3 72 latest/stable/… canonical✓ désactivé
gnome-3-34-1804 0+git.3556cb3 77 latest/stable/… canonical✓ -
gnome-3-38-2004 0+git.1f9014a 99 latest/stable canonical✓ -
gtk-common-themes 0.1-52-gb92ac40 1515 latest/stable/… canonical✓ désactivé
gtk-common-themes 0.1-59-g7bca6ae 1519 latest/stable/… canonical✓ -
qt515-core20 5.15.2 15 latest/stable keshavnrj désactivé
qt515-core20 5.15.2 18 latest/stable keshavnrj -
skype 8.82.0.403 206 latest/stable skype✓ -
skype 8.81.0.268 203 latest/stable skype✓ désactivé
snap-store 3.38.0-64-g23c4c77 547 latest/stable/… canonical✓ désactivé
snap-store 3.38.0-66-gbd5b8f7 558 latest/stable/… canonical✓ -
snapd 2.55.2 15314 latest/stable canonical✓ snapd,désactivé
snapd 2.54.4 15177 latest/stable canonical✓ snapd
stellarium-daily v0.21.3 1042 latest/stable t4saha désactivé
stellarium-daily v0.22.0 1114 latest/stable t4saha -
vlc 3.0.16 2344 latest/stable videolan✓ -
jean-marie@jeanmarie-HP-Z400-Workstation:~$ Hors ligne
#86 Le 09/04/2022, à 09:55
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Nom Version Révision Suivi Éditeur Notes
bluez 5.53-6 302 20/stable canonical✓ On attendra les conseils de Nuliel.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#87 Le 09/04/2022, à 09:59
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
OK, merci beaucoup.
Je vais devoir m'absenter, je dois aller sur le marché.
Je vous reprends cet après midi si vous pouvez évidemment.
Encore merci.
Hors ligne
#88 Le 09/04/2022, à 10:46
- Nuliel
Re : Couplage "Plantronics Backbeat pro 2" impossible
Wow, bluez en snap celle là je l'avais pas vu arriver.
Le deb est déjà installé vu le #5 mais le snap est utilisé en priorité avec le PATH, on va virer le snap:
snap remove bluezSuivi d'un redémarrage et tu peux retester.
Dernière modification par Nuliel (Le 09/04/2022, à 10:46)
Hors ligne
#89 Le 09/04/2022, à 13:21
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
J'ai désinstallé Bluez.
J'ai redémarré en déconnectant ma chaîne HiFi.
J'ai allumé mon casque.
Réponse du casque: "Aucun téléphone connecté".
Je refais la manip suivante:
jean-marie@jeanmarie-HP-Z400-Workstation:~$ bluetoothctl
Agent registered
[bluetooth]# agent on
Agent is already registered
[bluetooth]# power on
Changing power on succeeded
[bluetooth]# scan on
Discovery started
[CHG] Controller 00:E0:4C:87:59:03 Discovering: yes
[NEW] Device 7D:CE:19:22:0F:A3 7D-CE-19-22-0F-A3
[NEW] Device 4E:25:85:DD:03:7D 4E-25-85-DD-03-7D
[NEW] Device 5B:0C:1A:66:0A:F9 5B-0C-1A-66-0A-F9
[CHG] Device CB:76:CC:F3:5A:2F RSSI: -95
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Key: 0x004c
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Value:
10 06 23 1e 11 03 75 f0 ..#...u.
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Key: 0x004c
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Value:
01 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 ................
00 .
[bluetooth]# pair BC:F2:92:C7:4E:11
Device BC:F2:92:C7:4E:11 not available
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Key: 0x004c
[CHG] Device 7D:CE:19:22:0F:A3 ManufacturerData Value:
01 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 ................
00 .
[bluetooth]# quit
jean-marie@jeanmarie-HP-Z400-Workstation:~$ Adresse du casque inconnue.
Hors ligne
#90 Le 09/04/2022, à 13:28
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
J'avais installé Bluez suite à mon problème, ce n'était peut-être pas une bonne idée.
Dernière modification par Zébulon1960 (Le 09/04/2022, à 15:28)
Hors ligne
#91 Le 09/04/2022, à 13:35
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Redonne :
dmesg | grep -i bluetoothConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#92 Le 09/04/2022, à 13:38
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
jean-marie@jeanmarie-HP-Z400-Workstation:~$ dmesg | grep -i bluetooth
[ 1.295696] usb 5-2: Product: Bluetooth Radio
[ 16.219619] Bluetooth: Core ver 2.22
[ 16.219646] Bluetooth: HCI device and connection manager initialized
[ 16.219650] Bluetooth: HCI socket layer initialized
[ 16.219651] Bluetooth: L2CAP socket layer initialized
[ 16.219655] Bluetooth: SCO socket layer initialized
[ 16.901598] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[ 16.904086] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 16.904090] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761b_fw.bin
[ 18.577859] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761b_config.bin
[ 18.598719] Bluetooth: hci0: RTL: cfg_sz 14, total sz 11678
[ 18.694623] Bluetooth: hci0: RTL: fw version 0x097bec43
[ 33.112020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.112024] Bluetooth: BNEP filters: protocol multicast
[ 33.112027] Bluetooth: BNEP socket layer initialized
[ 75.250119] Bluetooth: RFCOMM TTY layer initialized
[ 75.250129] Bluetooth: RFCOMM socket layer initialized
[ 75.250136] Bluetooth: RFCOMM ver 1.11
jean-marie@jeanmarie-HP-Z400-Workstation:~$ Hors ligne
#93 Le 09/04/2022, à 13:46
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev bb)et intel.fr/content/www/fr/fr/products/sku/75439/intel-dual-band-wirelessac-7260/specifications
@Nuliel
La carte Intel 7260 étant une carte Combo Wifi/Bluetooth, ne peut-elle pas interférer, avec l'adaptateur rajouté en USB ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#94 Le 09/04/2022, à 13:51
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Excusez moi, mais je ne pense pas, car cette carte a été installée après mon problème.
Mais si vous voulez, je peux la désinstaller, j'ai le filaire.
Hors ligne
#95 Le 09/04/2022, à 13:53
- cracolinux
Re : Couplage "Plantronics Backbeat pro 2" impossible
Oui, et si elle intègre le bluetooth, pourquoi un dongle bluetooth USB en plus ?
Hors ligne
#96 Le 09/04/2022, à 13:54
- xubu1957
Re : Couplage "Plantronics Backbeat pro 2" impossible
Attends l'avis de Nuliel des autres aidants. 
Dernière modification par xubu1957 (Le 09/04/2022, à 13:55)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#97 Le 09/04/2022, à 13:57
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Le Bluetooth n'a jamais fonctionné avec cette carte, mais je peux la désinstaller.
Hors ligne
#98 Le 09/04/2022, à 14:02
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
OK, je me déconnecte du forum et je désinstalle la carte réseau (le câble Bluetooth n'est pas connecté sur cette carte, c'est un câble USB).
Honnêtement, je ne maîtrise pas la fonction Bluetooth sur cette carte.
Hors ligne
#99 Le 09/04/2022, à 14:43
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Coucou, me revoilou, si vous n'en avez pas marre.
J'ai enlevé ma carte Wifi, redémarré (le filaire ne fonctionnait pas).
J'ai quand même testé le Bluetooth (avec le dongle) et mon casque sans la carte Wifi et le problème reste le même.
Me voici donc de nouveau avec ma carte Wifi.
(Si vous voulez bien de moi)
Hors ligne
#100 Le 09/04/2022, à 15:29
- Zébulon1960
Re : Couplage "Plantronics Backbeat pro 2" impossible
Je vais essayer de me dépatouiller, ça ne va pas être simple. 
Merci beaucoup.
Hors ligne