Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/10/2021, à 17:03

zebone

scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

bonjour à tous
ayant  réinstallé  ubuntu 20.04 suite à un crash disk  je reprend  les installation de  mes materiels . mon scanner n'est pas  reconnu que me proposez  vous  de  faire ?
j'ai  fait une mise à jour .
merci de votre aide

Hors ligne

#2 Le 16/10/2021, à 17:07

xubu1957

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Bonjour,

Tenter cette solution ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 16/10/2021, à 17:18

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

je viens  de  le faire  mais pas  plus  de  reponse  en lançant skanlite  le scanner  n'a pas  de  device . je l'ai  branché  et debranché rebranché  ...
c'est comme  si  son port usb etait  en sommeil

Hors ligne

#4 Le 16/10/2021, à 17:20

xubu1957

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 16/10/2021, à 17:25

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

voici  un premier resu de  commande  tel que  demandé , desolé mais c'est tellement pas  mon domaine  que  je  suis patraque

francois@francois-B250M-DS3H:~$ cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.3 LTS"
5.11.0-37-generic x86_64
francois adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse
Bus 001 Device 005: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 001 Device 008: ID 04f9:035d Brother Industries, Ltd MFC-1910W
Bus 001 Device 010: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30
Bus 001 Device 002: ID 0c45:6362 Microdia JOYACCESS JA-Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Hors ligne

#6 Le 16/10/2021, à 17:27

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

et voici les  reponse  de la commande  en c

francois@francois-B250M-DS3H:~$ dpkg -l | grep sane
ii  libsane:amd64                              1.0.29-0ubuntu5.2                     amd64        API library for scanners
ii  libsane-common                             1.0.29-0ubuntu5.2                     all          API library for scanners -- documentation and support files
ii  libsane-hpaio:amd64                        3.20.3+dfsg0-2                        amd64        HP SANE backend for multi-function peripherals
ii  sane-utils                                 1.0.29-0ubuntu5.2                     amd64        API library for scanners -- utilities

Hors ligne

#7 Le 16/10/2021, à 17:27

xubu1957

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Il faudrait fournir ces infos :

sylvain3800 a écrit :


C ] les infos a donner si ton problème est un problème de scanner .

Bon des fois  c'est le scanner qui veux pas scanner a lors dans ce cas là , c'est ces commandes qui sont intéressante pour les aidants
quel que soit la marque du scanner 

dpkg -l | grep sane
sudo sane-find-scanner -q
scanimage -L
ls /etc/sane.d/
cat /etc/sane.d/dll.conf
ls  /lib/udev/rules.d | grep libsane

_ _ _

Edit = messages regroupés
_ _ _

moko138 a écrit :

/!\  Si vous avez plusieurs retours à donner, séparez-les bien (toujours pour la lisibilité) :

comme
cela.

Dans un seul message, tu peux donner les retours séparés des cinq commandes restantes.

Dernière modification par xubu1957 (Le 05/12/2021, à 21:13)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#8 Le 16/10/2021, à 17:30

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

suite mais  dois-je attendre  5 mn entre chaque post  ou donner  toutes  les  reponses  des  commandes  conseillées  dans le  tuto ?

Hors ligne

#9 Le 16/10/2021, à 17:39

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

suite

francois@francois-B250M-DS3H:~$ sudo sane-find-scanner -q
[sudo] Mot de passe de francois : 
found USB scanner (vendor=0x04f9 [Brother], product=0x035d [MFC-1910W]) at libusb:001:008
found USB scanner (vendor=0x04a9 [Canon], product=0x220e [CanoScan], chip=LM9832/3) at libusb:001:010

puis

francois@francois-B250M-DS3H:~$ scanimage -L


device `plustek:libusb:001:010' is a Canon CanoScan N1240U/LiDE30 flatbed scanner

puis

rancois@francois-B250M-DS3H:~$ ls /etc/sane.d/
abaton.conf          dmc.conf       lexmark.conf     saned.conf
agfafocus.conf       epjitsu.conf   ma1509.conf      sceptre.conf
apple.conf           epson2.conf    magicolor.conf   sharp.conf
artec.conf           epson.conf     matsushita.conf  sm3840.conf
artec_eplus48u.conf  epsonds.conf   microtek2.conf   snapscan.conf
avision.conf         escl.conf      microtek.conf    sp15c.conf
bh.conf              fujitsu.conf   mustek.conf      st400.conf
canon630u.conf       genesys.conf   mustek_pp.conf   stv680.conf
canon.conf           gphoto2.conf   mustek_usb.conf  tamarack.conf
canon_dr.conf        gt68xx.conf    nec.conf         teco1.conf
canon_pp.conf        hp3900.conf    net.conf         teco2.conf
cardscan.conf        hp4200.conf    p5.conf          teco3.conf
coolscan2.conf       hp5400.conf    pie.conf         test.conf
coolscan3.conf       hp.conf        pieusb.conf      u12.conf
coolscan.conf        hpsj5s.conf    pixma.conf       umax1220u.conf
dc210.conf           hs2p.conf      plustek.conf     umax.conf
dc240.conf           ibm.conf       plustek_pp.conf  umax_pp.conf
dc25.conf            kodakaio.conf  qcam.conf        xerox_mfp.conf
dell1600n_net.conf   kodak.conf     ricoh.conf
dll.conf             kvs1025.conf   rts8891.conf
dll.d                leo.conf       s9036.conf

puis

francois@francois-B250M-DS3H:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
artec
artec_eplus48u
as6e
avision
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc210
#dc240
#dc25
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
escl
fujitsu
genesys
#gphoto2
gt68xx
hp
hp3500
hp3900
hp4200
hp5400
hp5590
hpljm1005
hpsj5s
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
kvs40xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pieusb
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
ricoh2
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
umax1220u
#umax_pp
v4l
xerox_mfp

puis

francois@francois-B250M-DS3H:~$ ls  /lib/udev/rules.d | grep libsane
60-libsane.rules

voila  j'ai fait qu'un seul post  avec toutes les  autres reponses
pour moi  c'est  du charabia  mais  je  sais  que  d'autres  comprennent tout ça parfaitement ...
moi  medecin  mais pas  vraiment informaticien ...
merci  beaucoup  de votre  aide

Hors ligne

#10 Le 16/10/2021, à 17:49

xubu1957

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Je trouve dans > askubuntu.com/questions/1308635/ubuntu-20-04-sees-my-lide30-scanner-but-cannot-use-it

La solution la plus courante consiste à débrancher le scanner, puis à supprimer complètement le pilote ippusbxd :

sudo apt remove ippusbxd

Une fois cela fait, reconnectez le scanner. Il doit être visible et utilisable dans n'importe quelle application de numérisation de documents.

Le 17 janvier 2021, Ginger a écrit :

Merci pour la suggestion. Ce n'était pas exactement ce dont j'avais besoin, mais

dmesg -w

m'a dit que le port que j'utilisais (via mon clavier) n'était pas assez puissant. Je l'ai donc basculé sur le port de mon bureau et cela a fonctionné.

Ni informaticien, ni médecin, utilisateur lambda. tongue

_ _ _

Edit = messages regroupés
_ _ _


Je vais essayer d'obtenir l'aide de Thierry Ordissimo.

Dernière modification par xubu1957 (Le 05/12/2021, à 21:16)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 08/11/2021, à 07:51

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

bonjour
retour  au pb  toujours pas resolu
voici  le retour  de  cette   commande  : dmesg -w

francois@francois-B250M-DS3H:~$ dmesg -w
[    0.000000] microcode: microcode updated early to revision 0xea, date = 2021-01-05
[    0.000000] Linux version 5.11.0-38-generic (buildd@lgw01-amd64-041) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #42~20.04.1-Ubuntu SMP Tue Sep 28 20:41:07 UTC 2021 (Ubuntu 5.11.0-38.42~20.04.1-generic 5.11.22)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic root=UUID=ab3e97e6-67ba-465c-9475-7150090dbf1c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c20c4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c20c5000-0x00000000c20c5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c20c6000-0x00000000c20c6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c20c7000-0x00000000c9e3dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9e3e000-0x00000000ca1a4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ca1a5000-0x00000000ca3a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca3aa000-0x00000000caa55fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000caa56000-0x00000000caffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xc0770018-0xc0780057] usable ==> usable
[    0.000000] e820: update [mem 0xc0770018-0xc0780057] usable ==> usable
[    0.000000] e820: update [mem 0xc075e018-0xc076f857] usable ==> usable
[    0.000000] e820: update [mem 0xc075e018-0xc076f857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c075e017] usable
[    0.000000] reserve setup_data: [mem 0x00000000c075e018-0x00000000c076f857] usable
[    0.000000] reserve setup_data: [mem 0x00000000c076f858-0x00000000c0770017] usable
[    0.000000] reserve setup_data: [mem 0x00000000c0770018-0x00000000c0780057] usable
[    0.000000] reserve setup_data: [mem 0x00000000c0780058-0x00000000c20c4fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c20c5000-0x00000000c20c5fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000c20c6000-0x00000000c20c6fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c20c7000-0x00000000c9e3dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c9e3e000-0x00000000ca1a4fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ca1a5000-0x00000000ca3a9fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ca3aa000-0x00000000caa55fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000caa56000-0x00000000caffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000062effffff] usable
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi: ACPI 2.0=0xca6aa000 ACPI=0xca6aa000 SMBIOS=0xcaed2000 SMBIOS 3.0=0xcaed1000 ESRT=0xc8c101d8 MOKvar=0xc5c8c000 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B250M-DS3H/B250M-DS3H-CF, BIOS F9e 03/09/2018
[    0.000000] tsc: Detected 3400.000 MHz processor
[    0.000000] tsc: Detected 3399.906 MHz TSC
[    0.000456] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000459] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000464] last_pfn = 0x62f000 max_arch_pfn = 0x400000000
[    0.000467] MTRR default type: write-back
[    0.000468] MTRR fixed ranges enabled:
[    0.000468]   00000-9FFFF write-back
[    0.000470]   A0000-BFFFF uncachable
[    0.000471]   C0000-FFFFF write-protect
[    0.000471] MTRR variable ranges enabled:
[    0.000472]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000474]   1 base 00D0000000 mask 7FF0000000 uncachable
[    0.000475]   2 base 00CC000000 mask 7FFC000000 uncachable
[    0.000476]   3 base 00CB800000 mask 7FFF800000 uncachable
[    0.000477]   4 disabled
[    0.000477]   5 disabled
[    0.000478]   6 disabled
[    0.000478]   7 disabled
[    0.000479]   8 disabled
[    0.000479]   9 disabled
[    0.000564] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001118] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.006523] found SMP MP-table at [mem 0x000fcc80-0x000fcc8f]
[    0.006532] esrt: Reserving ESRT space from 0x00000000c8c101d8 to 0x00000000c8c10210.
[    0.006536] e820: update [mem 0xc8c10000-0xc8c10fff] usable ==> reserved
[    0.006545] e820: update [mem 0xc5c8c000-0xc5c8cfff] usable ==> reserved
[    0.006555] check: Scanning 1 areas for low memory corruption
[    0.006558] Using GB pages for direct mapping
[    0.007003] secureboot: Secure boot disabled
[    0.007003] RAMDISK: [mem 0x3cd65000-0x3fffdfff]
[    0.007008] ACPI: Early table checksum verification disabled
[    0.007011] ACPI: RSDP 0x00000000CA6AA000 000024 (v02 ALASKA)
[    0.007014] ACPI: XSDT 0x00000000CA6AA0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007018] ACPI: FACP 0x00000000CA6D0D68 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.007022] ACPI: DSDT 0x00000000CA6AA208 026B5B (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.007025] ACPI: FACS 0x00000000CAA55C40 000040
[    0.007027] ACPI: APIC 0x00000000CA6D0E80 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.007029] ACPI: FPDT 0x00000000CA6D0F08 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007032] ACPI: MCFG 0x00000000CA6D0F50 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.007034] ACPI: SSDT 0x00000000CA6D0F90 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.007036] ACPI: FIDT 0x00000000CA6D1350 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007039] ACPI: SSDT 0x00000000CA6D13F0 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.007041] ACPI: SSDT 0x00000000CA6D4550 00255F (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.007044] ACPI: HPET 0x00000000CA6D6AB0 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.007046] ACPI: SSDT 0x00000000CA6D6AE8 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.007049] ACPI: SSDT 0x00000000CA6D78D0 002AD7 (v02 INTEL  xh_rvp10 00000000 INTL 20160422)
[    0.007051] ACPI: UEFI 0x00000000CA6DA3A8 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.007053] ACPI: SSDT 0x00000000CA6DA3F0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.007056] ACPI: LPIT 0x00000000CA6DB2D0 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.007058] ACPI: WSMT 0x00000000CA6DB368 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.007061] ACPI: SSDT 0x00000000CA6DB390 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.007063] ACPI: SSDT 0x00000000CA6DB630 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.007065] ACPI: DBGP 0x00000000CA6DE638 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.007068] ACPI: DBG2 0x00000000CA6DE670 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.007070] ACPI: BGRT 0x00000000CA6DE6C8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007072] ACPI: DMAR 0x00000000CA6DE700 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.007074] ACPI: Reserving FACP table memory at [mem 0xca6d0d68-0xca6d0e7b]
[    0.007076] ACPI: Reserving DSDT table memory at [mem 0xca6aa208-0xca6d0d62]
[    0.007077] ACPI: Reserving FACS table memory at [mem 0xcaa55c40-0xcaa55c7f]
[    0.007077] ACPI: Reserving APIC table memory at [mem 0xca6d0e80-0xca6d0f03]
[    0.007078] ACPI: Reserving FPDT table memory at [mem 0xca6d0f08-0xca6d0f4b]
[    0.007079] ACPI: Reserving MCFG table memory at [mem 0xca6d0f50-0xca6d0f8b]
[    0.007080] ACPI: Reserving SSDT table memory at [mem 0xca6d0f90-0xca6d134b]
[    0.007080] ACPI: Reserving FIDT table memory at [mem 0xca6d1350-0xca6d13eb]
[    0.007081] ACPI: Reserving SSDT table memory at [mem 0xca6d13f0-0xca6d4548]
[    0.007082] ACPI: Reserving SSDT table memory at [mem 0xca6d4550-0xca6d6aae]
[    0.007083] ACPI: Reserving HPET table memory at [mem 0xca6d6ab0-0xca6d6ae7]
[    0.007084] ACPI: Reserving SSDT table memory at [mem 0xca6d6ae8-0xca6d78cc]
[    0.007084] ACPI: Reserving SSDT table memory at [mem 0xca6d78d0-0xca6da3a6]
[    0.007085] ACPI: Reserving UEFI table memory at [mem 0xca6da3a8-0xca6da3e9]
[    0.007086] ACPI: Reserving SSDT table memory at [mem 0xca6da3f0-0xca6db2cd]
[    0.007087] ACPI: Reserving LPIT table memory at [mem 0xca6db2d0-0xca6db363]
[    0.007088] ACPI: Reserving WSMT table memory at [mem 0xca6db368-0xca6db38f]
[    0.007088] ACPI: Reserving SSDT table memory at [mem 0xca6db390-0xca6db62e]
[    0.007089] ACPI: Reserving SSDT table memory at [mem 0xca6db630-0xca6de631]
[    0.007090] ACPI: Reserving DBGP table memory at [mem 0xca6de638-0xca6de66b]
[    0.007091] ACPI: Reserving DBG2 table memory at [mem 0xca6de670-0xca6de6c3]
[    0.007092] ACPI: Reserving BGRT table memory at [mem 0xca6de6c8-0xca6de6ff]
[    0.007093] ACPI: Reserving DMAR table memory at [mem 0xca6de700-0xca6de7a7]
[    0.007100] ACPI: Local APIC address 0xfee00000
[    0.007228] No NUMA configuration found
[    0.007229] Faking a node at [mem 0x0000000000000000-0x000000062effffff]
[    0.007237] NODE_DATA(0) allocated [mem 0x62efd6000-0x62effffff]
[    0.007449] Zone ranges:
[    0.007449]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007451]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007453]   Normal   [mem 0x0000000100000000-0x000000062effffff]
[    0.007454]   Device   empty
[    0.007455] Movable zone start for each node
[    0.007457] Early memory node ranges
[    0.007457]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.007459]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.007459]   node   0: [mem 0x0000000000100000-0x00000000c20c4fff]
[    0.007460]   node   0: [mem 0x00000000c20c7000-0x00000000c9e3dfff]
[    0.007461]   node   0: [mem 0x00000000ca1a5000-0x00000000ca3a9fff]
[    0.007462]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.007463]   node   0: [mem 0x0000000100000000-0x000000062effffff]
[    0.007464] Initmem setup node 0 [mem 0x0000000000001000-0x000000062effffff]
[    0.007466] On node 0 totalpages: 6262751
[    0.007467]   DMA zone: 64 pages used for memmap
[    0.007468]   DMA zone: 26 pages reserved
[    0.007468]   DMA zone: 3997 pages, LIFO batch:0
[    0.007469]   DMA32 zone: 12866 pages used for memmap
[    0.007470]   DMA32 zone: 823362 pages, LIFO batch:63
[    0.007471]   Normal zone: 84928 pages used for memmap
[    0.007472]   Normal zone: 5435392 pages, LIFO batch:63
[    0.007473] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007474] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007489] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.011599] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.011609] On node 0, zone DMA32: 871 pages in unavailable ranges
[    0.011631] On node 0, zone DMA32: 3157 pages in unavailable ranges
[    0.039744] On node 0, zone Normal: 20480 pages in unavailable ranges
[    0.039774] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.039780] Reserving Intel graphics memory at [mem 0xcc000000-0xcfffffff]
[    0.040030] ACPI: PM-Timer IO Port: 0x1808
[    0.040031] ACPI: Local APIC address 0xfee00000
[    0.040035] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.040037] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.040037] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.040038] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.040063] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.040065] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.040067] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.040068] ACPI: IRQ0 used by override.
[    0.040069] ACPI: IRQ9 used by override.
[    0.040071] Using ACPI (MADT) for SMP configuration information
[    0.040071] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.040076] e820: update [mem 0xc6660000-0xc66e3fff] usable ==> reserved
[    0.040083] TSC deadline timer available
[    0.040084] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.040099] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.040100] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.040102] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.040103] PM: hibernation: Registered nosave memory: [mem 0xc075e000-0xc075efff]
[    0.040104] PM: hibernation: Registered nosave memory: [mem 0xc076f000-0xc076ffff]
[    0.040105] PM: hibernation: Registered nosave memory: [mem 0xc0770000-0xc0770fff]
[    0.040107] PM: hibernation: Registered nosave memory: [mem 0xc0780000-0xc0780fff]
[    0.040108] PM: hibernation: Registered nosave memory: [mem 0xc20c5000-0xc20c5fff]
[    0.040108] PM: hibernation: Registered nosave memory: [mem 0xc20c6000-0xc20c6fff]
[    0.040110] PM: hibernation: Registered nosave memory: [mem 0xc5c8c000-0xc5c8cfff]
[    0.040111] PM: hibernation: Registered nosave memory: [mem 0xc6660000-0xc66e3fff]
[    0.040112] PM: hibernation: Registered nosave memory: [mem 0xc8c10000-0xc8c10fff]
[    0.040114] PM: hibernation: Registered nosave memory: [mem 0xc9e3e000-0xca1a4fff]
[    0.040115] PM: hibernation: Registered nosave memory: [mem 0xca3aa000-0xcaa55fff]
[    0.040116] PM: hibernation: Registered nosave memory: [mem 0xcaa56000-0xcaffefff]
[    0.040117] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xcfffffff]
[    0.040118] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[    0.040119] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.040119] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[    0.040120] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.040120] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.040121] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.040122] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.040122] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.040123] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.040123] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.040124] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.040125] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.040126] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[    0.040127] Booting paravirtualized kernel on bare hardware
[    0.040129] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.040133] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.040232] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
[    0.040238] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
[    0.040240] pcpu-alloc: [0] 0 1 2 3 
[    0.040260] Built 1 zonelists, mobility grouping on.  Total pages: 6164867
[    0.040261] Policy zone: Normal
[    0.040262] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic root=UUID=ab3e97e6-67ba-465c-9475-7150090dbf1c ro quiet splash vt.handoff=7
[    0.041354] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.041877] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.041916] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.085666] Memory: 24305744K/25051004K available (14345K kernel code, 3478K rwdata, 5460K rodata, 2688K init, 5976K bss, 745000K reserved, 0K cma-reserved)
[    0.085671] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=0
[    0.085753] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.085764] Kernel/User page tables isolation: enabled
[    0.085776] ftrace: allocating 48695 entries in 191 pages
[    0.097741] ftrace: allocated 191 pages with 7 groups
[    0.097810] rcu: Hierarchical RCU implementation.
[    0.097811] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.097812] 	Rude variant of Tasks RCU enabled.
[    0.097813] 	Tracing variant of Tasks RCU enabled.
[    0.097813] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.097814] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.100356] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.100790] random: crng done (trusting CPU's manufacturer)
[    0.100804] vt handoff: transparent VT on vt#7
[    0.100809] Console: colour dummy device 80x25
[    0.100822] printk: console [tty0] enabled
[    0.100835] ACPI: Core revision 20201113
[    0.101051] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.101135] APIC: Switch to symmetric I/O mode setup
[    0.101137] DMAR: Host address width 39
[    0.101138] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.101141] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.101143] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.101146] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.101147] DMAR: RMRR base: 0x000000ca12f000 end: 0x000000ca14efff
[    0.101148] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cfffffff
[    0.101150] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.101151] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.101152] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.102750] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.102752] x2apic enabled
[    0.102764] Switched APIC routing to cluster x2apic.
[    0.106843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.125147] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3101f59f5e6, max_idle_ns: 440795259996 ns
[    0.125151] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.81 BogoMIPS (lpj=13599624)
[    0.125153] pid_max: default: 32768 minimum: 301
[    0.128188] LSM: Security Framework initializing
[    0.128194] Yama: becoming mindful.
[    0.128214] AppArmor: AppArmor initialized
[    0.128278] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.128323] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.128522] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.128537] process: using mwait in idle threads
[    0.128538] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.128539] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.128541] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.128543] Spectre V2 : Mitigation: Full generic retpoline
[    0.128543] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.128544] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.128545] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.128546] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.128548] TAA: Mitigation: Clear CPU buffers
[    0.128550] SRBDS: Mitigation: Microcode
[    0.128551] MDS: Mitigation: Clear CPU buffers
[    0.128730] Freeing SMP alternatives memory: 40K
[    0.130388] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1084
[    0.130399] smpboot: CPU0: Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.130522] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.130530] ... version:                4
[    0.130531] ... bit width:              48
[    0.130532] ... generic registers:      8
[    0.130532] ... value mask:             0000ffffffffffff
[    0.130533] ... max period:             00007fffffffffff
[    0.130533] ... fixed-purpose events:   3
[    0.130534] ... event mask:             00000007000000ff
[    0.130601] rcu: Hierarchical SRCU implementation.
[    0.131041] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.131078] smp: Bringing up secondary CPUs ...
[    0.131136] x86: Booting SMP configuration:
[    0.131136] .... node  #0, CPUs:      #1 #2 #3
[    0.134704] smp: Brought up 1 node, 4 CPUs
[    0.134704] smpboot: Max logical packages: 1
[    0.134704] smpboot: Total of 4 processors activated (27199.24 BogoMIPS)
[    0.134704] devtmpfs: initialized
[    0.134704] x86/mm: Memory block size: 128MB
[    0.137573] PM: Registering ACPI NVS region [mem 0xc20c5000-0xc20c5fff] (4096 bytes)
[    0.137573] PM: Registering ACPI NVS region [mem 0xca3aa000-0xcaa55fff] (6995968 bytes)
[    0.137573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.137573] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.137573] pinctrl core: initialized pinctrl subsystem
[    0.137573] PM: RTC time: 06:49:31, date: 2021-11-07
[    0.137573] NET: Registered protocol family 16
[    0.137792] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.137987] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.138174] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.138184] audit: initializing netlink subsys (disabled)
[    0.138198] audit: type=2000 audit(1636267771.036:1): state=initialized audit_enabled=0 res=1
[    0.138198] thermal_sys: Registered thermal governor 'fair_share'
[    0.138198] thermal_sys: Registered thermal governor 'bang_bang'
[    0.138198] thermal_sys: Registered thermal governor 'step_wise'
[    0.138198] thermal_sys: Registered thermal governor 'user_space'
[    0.138198] thermal_sys: Registered thermal governor 'power_allocator'
[    0.138198] EISA bus registered
[    0.138198] cpuidle: using governor ladder
[    0.138198] cpuidle: using governor menu
[    0.138198] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.138198] ACPI: bus type PCI registered
[    0.138198] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.138198] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.138198] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.138198] PCI: Using configuration type 1 for base access
[    0.138354] Kprobes globally optimized
[    0.138357] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.138357] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.138357] ACPI: Added _OSI(Module Device)
[    0.138357] ACPI: Added _OSI(Processor Device)
[    0.138357] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.138357] ACPI: Added _OSI(Processor Aggregator Device)
[    0.138357] ACPI: Added _OSI(Linux-Dell-Video)
[    0.138357] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.138357] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.173835] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.176223] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.179565] ACPI: Dynamic OEM Table Load:
[    0.179571] ACPI: SSDT 0xFFFF97FEC0C4C000 000717 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.180818] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.182150] ACPI: Dynamic OEM Table Load:
[    0.182155] ACPI: SSDT 0xFFFF97FEC0FE4800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.183330] ACPI: Dynamic OEM Table Load:
[    0.183333] ACPI: SSDT 0xFFFF97FEC14FBA00 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.184380] ACPI: Dynamic OEM Table Load:
[    0.184383] ACPI: SSDT 0xFFFF97FEC14FA200 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.185734] ACPI: Dynamic OEM Table Load:
[    0.185739] ACPI: SSDT 0xFFFF97FEC0C4F800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.187146] ACPI: Dynamic OEM Table Load:
[    0.187149] ACPI: SSDT 0xFFFF97FEC14FB200 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.188286] ACPI: Dynamic OEM Table Load:
[    0.188290] ACPI: SSDT 0xFFFF97FEC14FA000 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.191808] ACPI: Interpreter enabled
[    0.191840] ACPI: (supports S0 S3 S4 S5)
[    0.191841] ACPI: Using IOAPIC for interrupt routing
[    0.191871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.192871] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.195036] ACPI: Power Resource [PG00] (on)
[    0.195428] ACPI: Power Resource [PG01] (on)
[    0.195812] ACPI: Power Resource [PG02] (on)
[    0.198466] ACPI: Power Resource [WRST] (on)
[    0.198738] ACPI: Power Resource [WRST] (on)
[    0.199009] ACPI: Power Resource [WRST] (on)
[    0.199287] ACPI: Power Resource [WRST] (on)
[    0.199559] ACPI: Power Resource [WRST] (on)
[    0.199827] ACPI: Power Resource [WRST] (on)
[    0.200098] ACPI: Power Resource [WRST] (on)
[    0.200370] ACPI: Power Resource [WRST] (on)
[    0.200642] ACPI: Power Resource [WRST] (on)
[    0.200913] ACPI: Power Resource [WRST] (on)
[    0.201203] ACPI: Power Resource [WRST] (on)
[    0.201473] ACPI: Power Resource [WRST] (on)
[    0.201743] ACPI: Power Resource [WRST] (on)
[    0.202016] ACPI: Power Resource [WRST] (on)
[    0.202289] ACPI: Power Resource [WRST] (on)
[    0.202561] ACPI: Power Resource [WRST] (on)
[    0.202833] ACPI: Power Resource [WRST] (on)
[    0.203974] ACPI: Power Resource [WRST] (on)
[    0.204244] ACPI: Power Resource [WRST] (on)
[    0.204515] ACPI: Power Resource [WRST] (on)
[    0.213858] ACPI: Power Resource [FN00] (off)
[    0.213942] ACPI: Power Resource [FN01] (off)
[    0.214022] ACPI: Power Resource [FN02] (off)
[    0.214102] ACPI: Power Resource [FN03] (off)
[    0.214180] ACPI: Power Resource [FN04] (off)
[    0.215274] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.215280] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.215315] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.216019] PCI host bridge to bus 0000:00
[    0.216021] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.216023] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.216024] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.216026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.216027] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.216028] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.216039] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
[    0.216206] pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
[    0.216212] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[    0.216217] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.216220] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.216233] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.216369] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.216376] pci 0000:00:08.0: reg 0x10: [mem 0xf712e000-0xf712efff 64bit]
[    0.216510] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[    0.216524] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit]
[    0.216579] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.216792] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[    0.216808] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit]
[    0.216867] pci 0000:00:16.0: PME# supported from D3hot
[    0.217023] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[    0.217034] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff]
[    0.217040] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff]
[    0.217046] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.217052] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.217058] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.217063] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff]
[    0.217096] pci 0000:00:17.0: PME# supported from D3hot
[    0.217235] pci 0000:00:1b.0: [8086:a2eb] type 01 class 0x060400
[    0.217301] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.217496] pci 0000:00:1c.0: [8086:a294] type 01 class 0x060400
[    0.217555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.217734] pci 0000:00:1c.5: [8086:a295] type 01 class 0x060400
[    0.217792] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.217956] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
[    0.218014] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.218178] pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
[    0.218237] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.218403] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[    0.218470] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.218638] pci 0000:00:1d.1: [8086:a299] type 01 class 0x060400
[    0.218704] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.218871] pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400
[    0.218937] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.219103] pci 0000:00:1d.3: [8086:a29b] type 01 class 0x060400
[    0.219169] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[    0.219351] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100
[    0.219569] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[    0.219580] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff]
[    0.219740] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[    0.219758] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[    0.219780] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit]
[    0.219820] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.220011] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[    0.220067] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit]
[    0.220137] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.220381] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.220462] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.220480] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.220503] pci 0000:02:00.0: reg 0x18: [mem 0xf7000000-0xf7000fff 64bit]
[    0.220517] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.220608] pci 0000:02:00.0: supports D1 D2
[    0.220609] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220746] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.220748] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.220750] pci 0000:00:1c.0:   bridge window [mem 0xf7000000-0xf70fffff]
[    0.220754] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.220806] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.220858] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.220911] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.220965] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.221021] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.221077] pci 0000:00:1d.2: PCI bridge to [bus 08]
[    0.221133] pci 0000:00:1d.3: PCI bridge to [bus 09]
[    0.223179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.223289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223341] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223444] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223496] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.223547] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229524] iommu: Default domain type: Translated 
[    0.229524] SCSI subsystem initialized
[    0.229524] libata version 3.00 loaded.
[    0.229524] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.229524] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.229524] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.229524] vgaarb: loaded
[    0.229524] ACPI: bus type USB registered
[    0.229524] usbcore: registered new interface driver usbfs
[    0.229524] usbcore: registered new interface driver hub
[    0.229524] usbcore: registered new device driver usb
[    0.229524] pps_core: LinuxPPS API ver. 1 registered
[    0.229524] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.229524] PTP clock support registered
[    0.229524] EDAC MC: Ver: 3.0.0
[    0.229524] Registered efivars operations
[    0.229524] NetLabel: Initializing
[    0.229524] NetLabel:  domain hash size = 128
[    0.229524] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.229524] NetLabel:  unlabeled traffic allowed by default
[    0.229524] PCI: Using ACPI for IRQ routing
[    0.236010] PCI: pci_cache_line_size set to 64 bytes
[    0.236050] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.236052] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.236052] e820: reserve RAM buffer [mem 0xc075e018-0xc3ffffff]
[    0.236053] e820: reserve RAM buffer [mem 0xc0770018-0xc3ffffff]
[    0.236054] e820: reserve RAM buffer [mem 0xc20c5000-0xc3ffffff]
[    0.236055] e820: reserve RAM buffer [mem 0xc5c8c000-0xc7ffffff]
[    0.236056] e820: reserve RAM buffer [mem 0xc6660000-0xc7ffffff]
[    0.236057] e820: reserve RAM buffer [mem 0xc8c10000-0xcbffffff]
[    0.236058] e820: reserve RAM buffer [mem 0xc9e3e000-0xcbffffff]
[    0.236059] e820: reserve RAM buffer [mem 0xca3aa000-0xcbffffff]
[    0.236059] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.236060] e820: reserve RAM buffer [mem 0x62f000000-0x62fffffff]
[    0.236064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.236064] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.238176] clocksource: Switched to clocksource tsc-early
[    0.243403] VFS: Disk quotas dquot_6.6.0
[    0.243413] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.243491] AppArmor: AppArmor Filesystem Enabled
[    0.243511] pnp: PnP ACPI init
[    0.243790] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.243793] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.243794] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.243798] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244127] pnp 00:01: [dma 0 disabled]
[    0.244127] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.244127] pnp 00:02: [dma 0 disabled]
[    0.244127] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.244127] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.244127] system 00:03: [io  0xffff] has been reserved
[    0.244127] system 00:03: [io  0xffff] has been reserved
[    0.244127] system 00:03: [io  0xffff] has been reserved
[    0.244127] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.244127] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.244127] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244127] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.244127] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244127] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.244127] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.244127] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.245201] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.245203] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.245204] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.245205] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.245206] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.245207] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.245209] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.245210] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.245211] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.245212] system 00:07: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[    0.245215] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245249] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.245250] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.245251] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.245252] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.245253] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.245254] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.245255] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.245258] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245517] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.245520] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246586] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.246587] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.246588] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.246591] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.247393] pnp: PnP ACPI: found 11 devices
[    0.252638] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.252679] NET: Registered protocol family 2
[    0.252783] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.254179] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.254287] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.254484] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.254558] TCP: Hash tables configured (established 262144 bind 65536)
[    0.254629] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.254707] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.254765] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.254823] NET: Registered protocol family 1
[    0.254826] NET: Registered protocol family 44
[    0.254836] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.254845] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.254847] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.254850] pci 0000:00:1c.0:   bridge window [mem 0xf7000000-0xf70fffff]
[    0.254853] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.254856] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.254862] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.254868] pci 0000:00:1c.7: PCI bridge to [bus 05]
[    0.254874] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.254881] pci 0000:00:1d.1: PCI bridge to [bus 07]
[    0.254888] pci 0000:00:1d.2: PCI bridge to [bus 08]
[    0.254894] pci 0000:00:1d.3: PCI bridge to [bus 09]
[    0.254901] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.254903] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.254904] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.254905] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff window]
[    0.254906] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.254907] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.254908] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[    0.254910] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.255062] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.255971] PCI: CLS 64 bytes, default 64
[    0.255998] Trying to unpack rootfs image as initramfs...
[    0.343922] Freeing initrd memory: 51812K
[    0.343965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.343966] software IO TLB: mapped [mem 0x00000000bc75e000-0x00000000c075e000] (64MB)
[    0.344140] check: Scanning for low memory corruption every 60 seconds
[    0.344420] Initialise system trusted keyrings
[    0.344428] Key type blacklist registered
[    0.344447] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.345197] zbud: loaded
[    0.345370] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.345446] fuse: init (API version 7.33)
[    0.345539] integrity: Platform Keyring initialized
[    0.351657] Key type asymmetric registered
[    0.351658] Asymmetric key parser 'x509' registered
[    0.351663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.351680] io scheduler mq-deadline registered
[    0.353030] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.353063] efifb: probing for efifb
[    0.353075] efifb: showing boot graphics
[    0.353649] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.353650] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.353651] efifb: scrolling: redraw
[    0.353652] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.353676] fbcon: Deferring console take-over
[    0.353677] fb0: EFI VGA frame buffer device
[    0.353681] intel_idle: MWAIT substates: 0x142120
[    0.353683] intel_idle: v0.5.1 model 0x9E
[    0.353806] intel_idle: Local APIC timer is reliable in all C-states
[    0.353936] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.353965] ACPI: Sleep Button [SLPB]
[    0.353982] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.353992] ACPI: Power Button [PWRB]
[    0.354011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.354041] ACPI: Power Button [PWRF]
[    0.354295] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1084
[    0.355148] thermal LNXTHERM:00: registered as thermal_zone0
[    0.355150] ACPI: Thermal Zone [TZ00] (28 C)
[    0.355276] thermal LNXTHERM:01: registered as thermal_zone1
[    0.355277] ACPI: Thermal Zone [TZ01] (30 C)
[    0.355494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.376250] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.378723] Linux agpgart interface v0.103
[    0.513442] loop: module loaded
[    0.513816] libphy: Fixed MDIO Bus: probed
[    0.513818] tun: Universal TUN/TAP device driver, 1.6
[    0.513916] PPP generic driver version 2.4.2
[    0.514112] VFIO - User Level meta-driver version: 0.3
[    0.514227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.514229] ehci-pci: EHCI PCI platform driver
[    0.514237] ehci-platform: EHCI generic platform driver
[    0.514244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.514245] ohci-pci: OHCI PCI platform driver
[    0.514250] ohci-platform: OHCI generic platform driver
[    0.514254] uhci_hcd: USB Universal Host Controller Interface driver
[    0.514279] i8042: PNP: No PS/2 controller found.
[    0.514340] mousedev: PS/2 mouse device common for all mice
[    0.514455] rtc_cmos 00:05: RTC can wake from S4
[    0.515047] rtc_cmos 00:05: registered as rtc0
[    0.515218] rtc_cmos 00:05: setting system clock to 2021-11-07T06:49:31 UTC (1636267771)
[    0.515241] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.515246] i2c /dev entries driver
[    0.515273] device-mapper: uevent: version 1.0.3
[    0.515300] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    0.515324] platform eisa.0: Probing EISA bus 0
[    0.515325] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.515326] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.515327] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.515328] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.515329] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.515329] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.515330] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.515331] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.515332] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.515332] platform eisa.0: EISA: Detected 0 cards
[    0.515334] intel_pstate: Intel P-state driver initializing
[    0.515703] intel_pstate: Disabling energy efficiency optimization
[    0.515704] intel_pstate: HWP enabled
[    0.515737] ledtrig-cpu: registered to indicate activity on CPUs
[    0.515740] EFI Variables Facility v0.08 2004-May-17
[    0.542182] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
[    0.542184] caller pmc_core_probe+0x81/0x200 mapping multiple BARs
[    0.542195] intel_pmc_core INT33A1:00:  initialized
[    0.542254] drop_monitor: Initializing network drop monitor service
[    0.542352] NET: Registered protocol family 10
[    0.546511] Segment Routing with IPv6
[    0.546539] NET: Registered protocol family 17
[    0.546591] Key type dns_resolver registered
[    0.546863] microcode: sig=0x906e9, pf=0x2, revision=0xea
[    0.546915] microcode: Microcode Update Driver: v2.2.
[    0.546918] IPI shorthand broadcast: enabled
[    0.546927] sched_clock: Marking stable (546429409, 484154)->(550157188, -3243625)
[    0.546990] registered taskstats version 1
[    0.546997] Loading compiled-in X.509 certificates
[    0.547472] Loaded X.509 cert 'Build time autogenerated kernel key: b7b636bb11118bc6a693b11ec4fb10c5f3fb970e'
[    0.547892] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.548314] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.548315] blacklist: Loading compiled-in revocation X.509 certificates
[    0.548328] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.548416] zswap: loaded using pool lzo/zbud
[    0.548478] Key type ._fscrypt registered
[    0.548479] Key type .fscrypt registered
[    0.548479] Key type fscrypt-provisioning registered
[    0.550456] Key type encrypted registered
[    0.550472] AppArmor: AppArmor sha1 policy hashing enabled
[    0.552118] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.552453] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.552455] ima: No TPM chip found, activating TPM-bypass!
[    0.552459] ima: Allocated hash algorithm: sha1
[    0.552463] ima: No architecture policies found
[    0.552469] evm: Initialising EVM extended attributes:
[    0.552469] evm: security.selinux
[    0.552470] evm: security.SMACK64
[    0.552470] evm: security.SMACK64EXEC
[    0.552471] evm: security.SMACK64TRANSMUTE
[    0.552471] evm: security.SMACK64MMAP
[    0.552472] evm: security.apparmor
[    0.552472] evm: security.ima
[    0.552472] evm: security.capability
[    0.552473] evm: HMAC attrs: 0x1
[    0.553765] PM:   Magic number: 13:976:821
[    0.553973] RAS: Correctable Errors collector initialized.
[    0.554711] Freeing unused decrypted memory: 2036K
[    0.554976] Freeing unused kernel image (initmem) memory: 2688K
[    0.581459] Write protecting the kernel read-only data: 22528k
[    0.582814] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.583276] Freeing unused kernel image (rodata/data gap) memory: 684K
[    0.654345] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.654346] x86/mm: Checking user space page tables
[    0.692753] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.692756] Run /init as init process
[    0.692757]   with arguments:
[    0.692758]     /init
[    0.692758]     splash
[    0.692759]   with environment:
[    0.692760]     HOME=/
[    0.692760]     TERM=linux
[    0.692761]     BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic
[    0.782190] ahci 0000:00:17.0: version 3.0
[    0.783035] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.783288] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.783293] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.784350] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.789836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.789839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.789840] usb usb1: Product: xHCI Host Controller
[    0.789841] usb usb1: Manufacturer: Linux 5.11.0-38-generic xhci-hcd
[    0.789842] usb usb1: SerialNumber: 0000:00:14.0
[    0.789961] hub 1-0:1.0: USB hub found
[    0.789991] hub 1-0:1.0: 12 ports detected
[    0.791532] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.791536] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.791538] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.791563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.791565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.791566] usb usb2: Product: xHCI Host Controller
[    0.791567] usb usb2: Manufacturer: Linux 5.11.0-38-generic xhci-hcd
[    0.791568] usb usb2: SerialNumber: 0000:00:14.0
[    0.791840] hub 2-0:1.0: USB hub found
[    0.791848] hub 2-0:1.0: 6 ports detected
[    0.793264] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.793268] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.798844] libphy: r8169: probed
[    0.799007] r8169 0000:02:00.0 eth0: RTL8168g/8111g, e0:d5:5e:56:4f:90, XID 4c0, IRQ 133
[    0.799010] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.802337] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
[    0.802451] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.802484] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.803810] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    0.804134] i2c i2c-0: Successfully instantiated SPD at 0x50
[    0.804451] i2c i2c-0: Successfully instantiated SPD at 0x51
[    0.804784] i2c i2c-0: Successfully instantiated SPD at 0x52
[    0.805096] i2c i2c-0: Successfully instantiated SPD at 0x53
[    0.817106] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.853854] scsi host0: ahci
[    0.854131] scsi host1: ahci
[    0.854474] scsi host2: ahci
[    0.854564] scsi host3: ahci
[    0.854704] scsi host4: ahci
[    0.854768] scsi host5: ahci
[    0.854796] ata1: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b100 irq 131
[    0.854799] ata2: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b180 irq 131
[    0.854800] ata3: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b200 irq 131
[    0.854802] ata4: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b280 irq 131
[    0.854803] ata5: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b300 irq 131
[    0.854805] ata6: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b380 irq 131
[    1.125410] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.169416] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.169450] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.171845] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.171881] No Local Variables are initialized for Method [_GTF]

[    1.171887] No Arguments are initialized for method [_GTF]

[    1.171894] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.171922] ata3.00: ATAPI: ASUS    BC-12D2HT, 3.00, max UDMA/133
[    1.173375] ata5: SATA link down (SStatus 4 SControl 300)
[    1.173410] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.173442] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.173695] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.173740] No Local Variables are initialized for Method [_GTF]

[    1.173746] No Arguments are initialized for method [_GTF]

[    1.173754] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.173795] ata6: SATA link down (SStatus 4 SControl 300)
[    1.173875] ata1.00: supports DRM functions and may not be fully accessible
[    1.174159] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.174192] No Local Variables are initialized for Method [_GTF]

[    1.174198] No Arguments are initialized for method [_GTF]

[    1.174206] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.174498] ata1.00: ATA-11: Samsung SSD 870 EVO 500GB, SVT01B6Q, max UDMA/133
[    1.174511] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.174772] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.174807] No Local Variables are initialized for Method [_GTF]

[    1.174813] No Arguments are initialized for method [_GTF]

[    1.174821] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.174853] ata3.00: configured for UDMA/133
[    1.174869] ata2.00: ATA-9: ST3000DM008-2DM166, CC26, max UDMA/133
[    1.174879] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.175418] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.175454] No Local Variables are initialized for Method [_GTF]

[    1.175460] No Arguments are initialized for method [_GTF]

[    1.175468] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.175847] ata4.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
[    1.175857] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.176223] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.176256] No Local Variables are initialized for Method [_GTF]

[    1.176263] No Arguments are initialized for method [_GTF]

[    1.176270] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.176893] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.176926] No Local Variables are initialized for Method [_GTF]

[    1.176933] No Arguments are initialized for method [_GTF]

[    1.176940] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.176980] ata2.00: configured for UDMA/133
[    1.177031] ata1.00: supports DRM functions and may not be fully accessible
[    1.178306] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)

[    1.178342] No Local Variables are initialized for Method [_GTF]

[    1.178348] No Arguments are initialized for method [_GTF]

[    1.178356] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    1.178623] ata4.00: configured for UDMA/133
[    1.179620] ata1.00: configured for UDMA/133
[    1.179883] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[    1.180274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.180326] ata1.00: Enabling discard_zeroes_data
[    1.180433] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.180454] sd 0:0:0:0: [sda] Write Protect is off
[    1.180459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.180489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.180631] scsi 1:0:0:0: Direct-Access     ATA      ST3000DM008-2DM1 CC26 PQ: 0 ANSI: 5
[    1.181037] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.181044] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.181053] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.181062] sd 1:0:0:0: [sdb] Write Protect is off
[    1.181068] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.181098] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.185228] scsi 2:0:0:0: CD-ROM            ASUS     BC-12D2HT        3.00 PQ: 0 ANSI: 5
[    1.193804] ata1.00: Enabling discard_zeroes_data
[    1.195600]  sda: sda1 sda2
[    1.209515] ata1.00: Enabling discard_zeroes_data
[    1.210646] sd 0:0:0:0: [sda] supports TCG Opal
[    1.210654] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.210968]  sdb:
[    1.233512] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.265784] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.265794] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.325484] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.325777] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.326215] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 0A01 PQ: 0 ANSI: 5
[    1.326658] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.326669] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.326691] sd 3:0:0:0: [sdc] Write Protect is off
[    1.326697] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.326721] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.331545] usb 1-3: New USB device found, idVendor=04a9, idProduct=220e, bcdDevice= 1.00
[    1.331558] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.331564] usb 1-3: Product: CanoScan
[    1.331569] usb 1-3: Manufacturer: Canon
[    1.349425] tsc: Refined TSC clocksource calibration: 3407.998 MHz
[    1.349441] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd208cfc, max_idle_ns: 440795283699 ns
[    1.349502] clocksource: Switched to clocksource tsc
[    1.404239]  sdc: sdc1
[    1.417618] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.461193] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    1.626016] usb 1-4: New USB device found, idVendor=04f9, idProduct=035d, bcdDevice= 1.00
[    1.626029] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.626035] usb 1-4: Product: MFC-1910W
[    1.626039] usb 1-4: Manufacturer: Brother
[    1.626044] usb 1-4: SerialNumber: E74241H6N367826
[    1.757404] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[    1.935942] usb 1-6: New USB device found, idVendor=0c45, idProduct=6362, bcdDevice= 1.00
[    1.935955] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.935962] usb 1-6: Product: JOYACCESS JA-Webcam
[    1.935966] usb 1-6: Manufacturer: Sonix Technology Co., Ltd.
[    1.935971] usb 1-6: SerialNumber: SN0001
[    2.069401] usb 1-7: new low-speed USB device number 5 using xhci_hcd
[    2.224498] usb 1-7: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[    2.224510] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.224516] usb 1-7: Product: Dell USB Keyboard
[    2.224521] usb 1-7: Manufacturer: Dell
[    2.353401] usb 1-8: new low-speed USB device number 6 using xhci_hcd
[    2.507609] usb 1-8: New USB device found, idVendor=413c, idProduct=3016, bcdDevice=29.00
[    2.507622] usb 1-8: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.507628] usb 1-8: Product: Dell Premium USB Optical Mouse
[    2.523269] hid: raw HID events driver (C) Jiri Kosina
[    2.531664] usbcore: registered new interface driver usbhid
[    2.531667] usbhid: USB HID core driver
[    2.534948] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:413C:2003.0001/input/input3
[    2.593840] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-7/input0
[    2.594217] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:3016.0002/input/input4
[    2.594787] hid-generic 0003:413C:3016.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:14.0-8/input0
[    2.689816] fbcon: Taking over console
[    2.689939] Console: switching to colour frame buffer device 128x48
[    3.297809] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.408983] systemd[1]: Inserted module 'autofs4'
[    3.492741] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.509461] systemd[1]: Detected architecture x86-64.
[    3.525853] systemd[1]: Set hostname to <francois-B250M-DS3H>.
[    3.664656] systemd[1]: Created slice system-modprobe.slice.
[    3.664814] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.664940] systemd[1]: Created slice system-tor.slice.
[    3.665083] systemd[1]: Created slice User and Session Slice.
[    3.665124] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.665267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.665298] systemd[1]: Reached target User and Group Name Lookups.
[    3.665307] systemd[1]: Reached target Remote File Systems.
[    3.665314] systemd[1]: Reached target Slices.
[    3.665857] systemd[1]: Listening on Syslog Socket.
[    3.666414] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.666446] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.666569] systemd[1]: Listening on Journal Audit Socket.
[    3.666622] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.666689] systemd[1]: Listening on Journal Socket.
[    3.666757] systemd[1]: Listening on udev Control Socket.
[    3.666799] systemd[1]: Listening on udev Kernel Socket.
[    3.667342] systemd[1]: Mounting Huge Pages File System...
[    3.667995] systemd[1]: Mounting POSIX Message Queue File System...
[    3.668713] systemd[1]: Mounting Kernel Debug File System...
[    3.669387] systemd[1]: Mounting Kernel Trace File System...
[    3.670413] systemd[1]: Starting Journal Service...
[    3.671153] systemd[1]: Starting Set the console keyboard layout...
[    3.671864] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.672521] systemd[1]: Starting Load Kernel Module drm...
[    3.672881] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.672908] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    3.674750] systemd[1]: Starting Load Kernel Modules...
[    3.675352] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.675947] systemd[1]: Starting udev Coldplug all Devices...
[    3.677100] systemd[1]: Starting Uncomplicated firewall...
[    3.682536] systemd[1]: Mounted Huge Pages File System.
[    3.682649] systemd[1]: Mounted POSIX Message Queue File System.
[    3.682741] systemd[1]: Mounted Kernel Debug File System.
[    3.682811] systemd[1]: Mounted Kernel Trace File System.
[    3.683206] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.683529] systemd[1]: Finished Uncomplicated firewall.
[    3.687722] systemd[1]: modprobe@drm.service: Succeeded.
[    3.687931] systemd[1]: Finished Load Kernel Module drm.
[    3.690116] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    3.692359] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.692953] systemd[1]: Activating swap /swapfile...
[    3.693242] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.693293] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    3.693847] systemd[1]: Starting Load/Save Random Seed...
[    3.694433] systemd[1]: Starting Create System Users...
[    3.710562] systemd[1]: Finished Create System Users.
[    3.711267] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.713262] systemd[1]: Finished Load/Save Random Seed.
[    3.713952] lp: driver loaded but no devices found
[    3.717223] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    3.717276] systemd[1]: Activated swap /swapfile.
[    3.717339] systemd[1]: Reached target Swap.
[    3.725852] systemd[1]: Finished Set the console keyboard layout.
[    3.726298] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.726373] systemd[1]: Reached target Local File Systems (Pre).
[    3.726907] ppdev: user-space parallel port driver
[    3.727457] systemd[1]: Mounting Mount unit for audacity, revision 920...
[    3.728180] systemd[1]: Mounting Mount unit for audacity, revision 922...
[    3.728285] parport_pc 00:01: reported by Plug and Play ACPI
[    3.728331] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[    3.729028] systemd[1]: Mounting Mount unit for bare, revision 5...
[    3.729926] systemd[1]: Mounting Mount unit for canonical-livepatch, revision 105...
[    3.730666] systemd[1]: Mounting Mount unit for canonical-livepatch, revision 114...
[    3.731499] systemd[1]: Mounting Mount unit for chromium, revision 1801...
[    3.732485] systemd[1]: Mounting Mount unit for chromium, revision 1810...
[    3.735559] loop0: detected capacity change from 0 to 20840
[    3.738183] systemd[1]: Mounting Mount unit for core, revision 11798...
[    3.741801] systemd[1]: Mounting Mount unit for core, revision 11993...
[    3.742654] systemd[1]: Mounting Mount unit for core18, revision 2128...
[    3.743405] systemd[1]: Mounting Mount unit for core18, revision 2246...
[    3.744228] systemd[1]: Mounting Mount unit for core20, revision 1169...
[    3.745352] systemd[1]: Mounting Mount unit for cups, revision 543...
[    3.746134] systemd[1]: Mounting Mount unit for cups, revision 546...
[    3.746975] systemd[1]: Mounting Mount unit for deezer-unofficial-player, revision 11...
[    3.747987] systemd[1]: Mounting Mount unit for djpdf, revision 58...
[    3.748922] systemd[1]: Mounting Mount unit for document-imaging, revision 11...
[    3.749890] systemd[1]: Mounting Mount unit for fakecam, revision 104...
[    3.750763] systemd[1]: Mounting Mount unit for firefox, revision 689...
[    3.751613] systemd[1]: Mounting Mount unit for firefox, revision 701...
[    3.752527] systemd[1]: Mounting Mount unit for gimp, revision 372...
[    3.753747] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 161...
[    3.754850] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
[    3.755654] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 72...
[    3.756621] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 76...
[    3.757422] systemd[1]: Mounting Mount unit for gtk2-common-themes, revision 13...
[    3.758326] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
[    3.759064] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519...
[    3.759886] systemd[1]: Mounting Mount unit for ipp-usb, revision 7...
[    3.760700] systemd[1]: Mounting Mount unit for kde-frameworks-5-core18, revision 32...
[    3.761671] systemd[1]: Mounting Mount unit for kde-frameworks-5-qt-5-15-3-core20, revision 5...
[    3.762567] systemd[1]: Mounting Mount unit for kdenlive, revision 44...
[    3.763299] systemd[1]: Mounting Mount unit for kdenlive, revision 45...
[    3.764371] systemd[1]: Mounting Mount unit for musescore, revision 216...
[    3.766190] systemd[1]: Mounting Mount unit for skanlite, revision 7...
[    3.767031] systemd[1]: Mounting Mount unit for snap-store, revision 518...
[    3.767794] systemd[1]: Mounting Mount unit for snap-store, revision 547...
[    3.767902] loop1: detected capacity change from 0 to 379584
[    3.768009] loop2: detected capacity change from 0 to 379568
[    3.768062] loop3: detected capacity change from 0 to 296096
[    3.768770] systemd[1]: Mounting Mount unit for snapd, revision 13270...
[    3.769507] systemd[1]: Mounting Mount unit for snapd, revision 13640...
[    3.770313] systemd[1]: Mounting Mount unit for vlc, revision 2344...
[    3.771149] systemd[1]: Mounting Mount unit for youtube-music-desktop-app, revision 6...
[    3.771968] systemd[1]: Mounting Mount unit for zoom-client, revision 160...
[    3.772683] systemd[1]: Mounting Mount unit for zoom-client, revision 163...
[    3.773430] systemd[1]: Starting udev Kernel Device Manager...
[    3.774324] systemd[1]: Started Journal Service.
[    3.785548] systemd-journald[395]: Received client request to flush runtime journal.
[    3.825573] lp0: using parport0 (interrupt-driven).
[    3.849255] loop4: detected capacity change from 0 to 20624
[    3.874227] loop5: detected capacity change from 0 to 203648
[    3.893569] loop6: detected capacity change from 0 to 104360
[    3.910271] loop7: detected capacity change from 0 to 203656
[    3.972632] loop8: detected capacity change from 0 to 113536
[    4.063502] loop9: detected capacity change from 0 to 45376
[    4.117756] loop10: detected capacity change from 0 to 311936
[    4.167480] loop11: detected capacity change from 0 to 113656
[    4.182593] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.211055] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    4.211293] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    4.211493] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[    4.212122] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    4.265065] loop12: detected capacity change from 0 to 149136
[    4.266307] pstore: Using crash dump compression: deflate
[    4.266313] pstore: Registered efi as persistent store backend
[    4.274392] usblp 1-4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035D
[    4.275571] mc: Linux media interface: v0.10
[    4.276335] usbcore: registered new interface driver usblp
[    4.280478] videodev: Linux video capture interface: v2.00
[    4.296165] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.296168] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.296169] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.296170] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.296171] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.301402] loop13: detected capacity change from 0 to 296144
[    4.342081] uvcvideo: Found UVC 1.00 device JOYACCESS JA-Webcam (0c45:6362)
[    4.345493] cryptd: max_cpu_qlen set to 1000
[    4.352728] AVX2 version of gcm_enc/dec engaged.
[    4.352730] AES CTR mode by8 optimization enabled
[    4.372580] input: JOYACCESS JA-Webcam: JOYACCESS  as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input5
[    4.372624] usbcore: registered new interface driver uvcvideo
[    4.372625] USB Video Class driver (1.1.1)
[    4.381897] checking generic (e0000000 300000) vs hw (f6000000 1000000)
[    4.381899] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    4.381900] fb0: switching to inteldrmfb from EFI VGA
[    4.382015] Console: switching to colour dummy device 80x25
[    4.382039] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.386910] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.389574] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    4.392770] usb 1-6: 3:1: cannot get freq at ep 0x84
[    4.400258] loop14: detected capacity change from 0 to 8
[    4.402796] usbcore: registered new interface driver snd-usb-audio
[    4.422906] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    4.424775] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.425065] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    4.459062] loop15: detected capacity change from 0 to 498104
[    4.463749] fbcon: i915drmfb (fb0) is primary device
[    4.463786] Console: switching to colour frame buffer device 240x67
[    4.463811] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.479654] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.539829] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.539920] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    4.545600] loop16: detected capacity change from 0 to 311936
[    4.586722] loop17: detected capacity change from 0 to 111808
[    4.588868] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.588872] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.588873] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.588875] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.588876] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    4.588877] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.588878] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.588879] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.588880] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.615320] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    4.615355] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    4.615385] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    4.615413] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    4.615440] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    4.615477] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    4.615506] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    4.615533] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.615559] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.615586] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.623158] intel_rapl_common: Found RAPL domain package
[    4.623161] intel_rapl_common: Found RAPL domain core
[    4.623162] intel_rapl_common: Found RAPL domain uncore
[    4.623163] intel_rapl_common: Found RAPL domain dram
[    4.654164] loop18: detected capacity change from 0 to 126632
[    4.720881] loop19: detected capacity change from 0 to 631560
[    4.757723] loop20: detected capacity change from 0 to 509144
[    4.871377] loop21: detected capacity change from 0 to 128728
[    4.917342] loop22: detected capacity change from 0 to 742840
[    5.009764] loop23: detected capacity change from 0 to 360424
[    5.072433] loop24: detected capacity change from 0 to 448512
[    5.126491] loop25: detected capacity change from 0 to 533936
[    5.198110] loop26: detected capacity change from 0 to 132648
[    5.247495] loop27: detected capacity change from 0 to 653256
[    5.332821] loop28: detected capacity change from 0 to 18184
[    5.413163] loop29: detected capacity change from 0 to 280
[    5.499559] loop30: detected capacity change from 0 to 66368
[    5.580779] loop31: detected capacity change from 0 to 104536
[    5.667109] loop32: detected capacity change from 0 to 7648
[    5.729416] loop33: detected capacity change from 0 to 566592
[    5.802151] loop34: detected capacity change from 0 to 337424
[    5.871000] loop35: detected capacity change from 0 to 743512
[    5.946438] loop36: detected capacity change from 0 to 506104
[    6.038233] loop37: detected capacity change from 0 to 133552
[    6.095087] loop38: detected capacity change from 0 to 448496
[    6.160214] loop39: detected capacity change from 0 to 111808
[    6.242812] loop40: detected capacity change from 0 to 605624
[    6.300079] loop41: detected capacity change from 0 to 66440
[    6.379687] loop42: detected capacity change from 0 to 496320
[    6.451061] audit: type=1400 audit(1636267777.430:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1126 comm="apparmor_parser"
[    6.451554] audit: type=1400 audit(1636267777.430:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1127 comm="apparmor_parser"
[    6.451558] audit: type=1400 audit(1636267777.430:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1127 comm="apparmor_parser"
[    6.456434] audit: type=1400 audit(1636267777.434:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1125 comm="apparmor_parser"
[    6.456440] audit: type=1400 audit(1636267777.434:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1125 comm="apparmor_parser"
[    6.456442] audit: type=1400 audit(1636267777.434:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1128 comm="apparmor_parser"
[    6.456650] audit: type=1400 audit(1636267777.434:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1130 comm="apparmor_parser"
[    6.460986] audit: type=1400 audit(1636267777.438:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1131 comm="apparmor_parser"
[    6.462754] audit: type=1400 audit(1636267777.442:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1132 comm="apparmor_parser"
[    6.464094] audit: type=1400 audit(1636267777.442:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1134 comm="apparmor_parser"
[    7.093168] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[    7.301334] r8169 0000:02:00.0 enp2s0: Link is Down
[    7.594718] usb 1-6: 3:1: cannot get freq at ep 0x84
[    7.789371] usb 1-6: 3:1: cannot get freq at ep 0x84
[   10.190519] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   10.190531] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   11.263922] loop43: detected capacity change from 0 to 8
[   11.922211] usblp0: removed
[   11.930786] usblp 1-4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035D
[   12.058407] kauditd_printk_skb: 115 callbacks suppressed
[   12.058409] audit: type=1326 audit(1636267783.038:127): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=2022 comm="cupsd" exe="/snap/cups/546/sbin/cupsd" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f3c6b7e54fb code=0x50000
[   13.089787] audit: type=1326 audit(1636267784.070:128): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=2023 comm="cups-proxyd" exe="/snap/cups/546/sbin/cups-proxyd" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f2c7e53689d code=0x50000
[   16.014900] rfkill: input handler disabled
[   16.300844] audit: type=1400 audit(1636267787.278:129): apparmor="DENIED" operation="capable" profile="/snap/snapd/13640/usr/lib/snapd/snap-confine" pid=2307 comm="snap-confine" capability=4  capname="fsetid"
[   17.876008] audit: type=1326 audit(1636267788.854:130): auid=1003 uid=1003 gid=1003 ses=2 subj=snap.snap-store.ubuntu-software pid=2307 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7fba4fd3c639 code=0x50000
[   21.200045] audit: type=1107 audit(1636267792.178:131): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=2307 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   21.200807] audit: type=1107 audit(1636267792.178:132): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=2307 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   22.846823] audit: type=1400 audit(1636267793.826:133): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2307 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1003 ouid=0
[   22.870672] audit: type=1400 audit(1636267793.850:134): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2307 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1003 ouid=0
[   23.256937] audit: type=1326 audit(1636267794.234:135): auid=1003 uid=1003 gid=1003 ses=2 subj=snap.snap-store.ubuntu-software pid=2307 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fba4fd324e7 code=0x50000
[   23.284830] audit: type=1107 audit(1636267794.262:136): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=2307 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   23.285144] audit: type=1107 audit(1636267794.262:137): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=2307 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   23.560358] audit: type=1400 audit(1636267794.538:138): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=2307 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1003 ouid=0
[   56.008634] audit: type=1107 audit(1636267826.986:139): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterModified" name=":1.20" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=1464 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   56.010240] audit: type=1107 audit(1636267826.990:140): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterModified" name=":1.20" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=1464 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   56.113372] audit: type=1326 audit(1636267827.094:141): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=2022 comm="cupsd" exe="/snap/cups/546/sbin/cupsd" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7f3c6b7e54fb code=0x50000
[   66.790408] audit: type=1107 audit(1636267837.770:142): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterModified" name=":1.20" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=1464 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   66.792044] audit: type=1107 audit(1636267837.770:143): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterModified" name=":1.20" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=1464 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58276.910582] audit: type=1107 audit(1636326048.272:144): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterDeleted" name=":1.82" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=2534 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58276.913174] audit: type=1107 audit(1636326048.276:145): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterStopped" name=":1.82" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=2534 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58276.914574] audit: type=1107 audit(1636326048.276:146): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterDeleted" name=":1.182" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8458 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58276.914694] audit: type=1107 audit(1636326048.276:147): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterStopped" name=":1.182" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8458 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58276.978787] audit: type=1107 audit(1636326048.340:148): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="ServerStarted" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58277.031696] audit: type=1400 audit(1636326048.396:149): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=8462 comm="cups-browsed" capability=23  capname="sys_nice"
[58278.686516] audit: type=1107 audit(1636326050.048:150): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterAdded" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58278.688887] audit: type=1107 audit(1636326050.052:151): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterModified" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58278.694876] audit: type=1107 audit(1636326050.056:152): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterStateChanged" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[58278.694881] audit: type=1107 audit(1636326050.056:153): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterStateChanged" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[80500.693532] kauditd_printk_skb: 2 callbacks suppressed
[80500.693534] audit: type=1400 audit(1636348272.093:156): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2307 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1003 ouid=0
[80500.718322] audit: type=1400 audit(1636348272.121:157): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=2307 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1003 ouid=0
[80501.123856] audit: type=1326 audit(1636348272.525:158): auid=1003 uid=1003 gid=1003 ses=2 subj=snap.snap-store.ubuntu-software pid=2307 comm="pool-org.gnome." exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fba4fd324e7 code=0x50000
[85530.342513] rfkill: input handler enabled
[85532.066916] rfkill: input handler disabled
[85547.048822] rfkill: input handler enabled
[85549.026531] rfkill: input handler disabled
[85549.488439] audit: type=1326 audit(1636353320.894:159): auid=1000 uid=1000 gid=1000 ses=49 subj=snap.snap-store.ubuntu-software pid=13139 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7fed79547639 code=0x50000
[85550.132297] audit: type=1107 audit(1636353321.538:160): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=13139 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[85550.132671] audit: type=1107 audit(1636353321.538:161): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=13139 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[85551.775605] audit: type=1400 audit(1636353323.182:162): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=13139 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[85551.799947] audit: type=1400 audit(1636353323.206:163): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=13139 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[85552.191956] audit: type=1326 audit(1636353323.598:164): auid=1000 uid=1000 gid=1000 ses=49 subj=snap.snap-store.ubuntu-software pid=13139 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fed7953d4e7 code=0x50000
[85552.224037] audit: type=1107 audit(1636353323.630:165): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=13139 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[85552.224545] audit: type=1107 audit(1636353323.630:166): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=13139 label="snap.snap-store.ubuntu-software" peer_pid=1311 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[85552.319340] audit: type=1400 audit(1636353323.726:167): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=13139 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[85561.507286] audit: type=1400 audit(1636353332.914:168): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=13139 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[85561.533778] audit: type=1400 audit(1636353332.942:169): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/gdm/greeter/applications/gnome-initial-setup.desktop" pid=13139 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[85561.959343] audit: type=1326 audit(1636353333.366:170): auid=1000 uid=1000 gid=1000 ses=49 subj=snap.snap-store.ubuntu-software pid=13139 comm="pool-org.gnome." exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fed7953d4e7 code=0x50000
[85741.497963] usb 1-3: USB disconnect, device number 2
[85809.084466] usb 1-3: new full-speed USB device number 7 using xhci_hcd
[85809.234319] usb 1-3: New USB device found, idVendor=04a9, idProduct=220e, bcdDevice= 1.00
[85809.234332] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85809.234339] usb 1-3: Product: CanoScan
[85809.234343] usb 1-3: Manufacturer: Canon
[85809.259345] audit: type=1400 audit(1636353580.667:171): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15038 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.289386] audit: type=1400 audit(1636353580.699:172): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15045 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.313517] audit: type=1400 audit(1636353580.723:173): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15048 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.337913] audit: type=1400 audit(1636353580.747:174): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15051 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.362616] audit: type=1400 audit(1636353580.771:175): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15054 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.391780] audit: type=1400 audit(1636353580.799:176): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15057 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.423519] audit: type=1400 audit(1636353580.831:177): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15060 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.455476] audit: type=1400 audit(1636353580.863:178): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15063 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.487324] audit: type=1400 audit(1636353580.895:179): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15066 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[85809.519280] audit: type=1400 audit(1636353580.927:180): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15069 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86203.987476] usb 1-6: USB disconnect, device number 4
[86208.226910] usb 1-4: USB disconnect, device number 3
[86208.227287] usblp0: removed
[86208.247131] audit: type=1107 audit(1636353979.655:181): pid=1292 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/cups/cupsd/Notifier" interface="org.cups.cupsd.Notifier" member="PrinterStopped" name=":1.185" mask="receive" pid=2023 label="snap.cups.cupsd" peer_pid=8469 peer_label="/usr/sbin/cupsd"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[86212.163813] usb 1-6: new high-speed USB device number 9 using xhci_hcd
[86212.313608] usb 1-6: New USB device found, idVendor=04f9, idProduct=035d, bcdDevice= 1.00
[86212.313622] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[86212.313628] usb 1-6: Product: MFC-1910W
[86212.313632] usb 1-6: Manufacturer: Brother
[86212.313636] usb 1-6: SerialNumber: E74241H6N367826
[86212.319520] usblp 1-6:1.0: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035D
[86212.342945] audit: type=1400 audit(1636353983.751:182): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15233 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.368102] audit: type=1400 audit(1636353983.779:183): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15261 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.394326] audit: type=1400 audit(1636353983.803:184): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15272 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.418169] audit: type=1400 audit(1636353983.827:185): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15275 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.444129] audit: type=1400 audit(1636353983.855:186): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15278 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.471331] audit: type=1400 audit(1636353983.879:187): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15281 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.501287] audit: type=1400 audit(1636353983.911:188): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15284 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.533526] audit: type=1400 audit(1636353983.943:189): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15287 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86212.565535] audit: type=1400 audit(1636353983.975:190): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15290 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86213.917648] usb 1-3: USB disconnect, device number 7
[86215.427802] usb 1-5: new full-speed USB device number 10 using xhci_hcd
[86215.577655] usb 1-5: New USB device found, idVendor=04a9, idProduct=220e, bcdDevice= 1.00
[86215.577670] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[86215.577676] usb 1-5: Product: CanoScan
[86215.577681] usb 1-5: Manufacturer: Canon
[86215.602978] kauditd_printk_skb: 11 callbacks suppressed
[86215.602980] audit: type=1400 audit(1636353987.011:202): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15349 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.631593] audit: type=1400 audit(1636353987.039:203): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15355 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.663731] audit: type=1400 audit(1636353987.075:204): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15358 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.695664] audit: type=1400 audit(1636353987.103:205): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15361 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.727865] audit: type=1400 audit(1636353987.139:206): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15364 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.760582] audit: type=1400 audit(1636353987.171:207): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15367 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.793095] audit: type=1400 audit(1636353987.203:208): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15370 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.825221] audit: type=1400 audit(1636353987.235:209): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15373 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.857385] audit: type=1400 audit(1636353987.267:210): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15376 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86215.889281] audit: type=1400 audit(1636353987.299:211): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15379 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86217.453793] usblp0: removed
[86217.462717] usblp 1-6:1.0: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035D
[86229.123785] usb 1-4: new high-speed USB device number 11 using xhci_hcd
[86229.302098] usb 1-4: New USB device found, idVendor=0c45, idProduct=6362, bcdDevice= 1.00
[86229.302112] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[86229.302118] usb 1-4: Product: JOYACCESS JA-Webcam
[86229.302122] usb 1-4: Manufacturer: Sonix Technology Co., Ltd.
[86229.302127] usb 1-4: SerialNumber: SN0001
[86229.307526] uvcvideo: Found UVC 1.00 device JOYACCESS JA-Webcam (0c45:6362)
[86229.321803] input: JOYACCESS JA-Webcam: JOYACCESS  as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input17
[86229.330789] usb 1-4: 3:1: cannot get freq at ep 0x84
[86229.331310] kauditd_printk_skb: 1 callbacks suppressed
[86229.331316] audit: type=1400 audit(1636354000.739:213): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15414 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.355504] audit: type=1400 audit(1636354000.763:214): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15434 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.380792] audit: type=1400 audit(1636354000.791:215): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15471 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.406284] audit: type=1400 audit(1636354000.815:216): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15478 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.430454] audit: type=1400 audit(1636354000.839:217): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15483 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.453592] usb 1-4: 3:1: cannot get freq at ep 0x84
[86229.454897] audit: type=1400 audit(1636354000.863:218): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15493 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.457024] usb 1-4: 3:1: cannot get freq at ep 0x84
[86229.479037] audit: type=1400 audit(1636354000.887:219): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15498 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.502957] audit: type=1400 audit(1636354000.911:220): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15502 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.526768] audit: type=1400 audit(1636354000.935:221): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15505 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86229.550587] audit: type=1400 audit(1636354000.959:222): apparmor="DENIED" operation="open" profile="snap.ipp-usb.ipp-usb" name="/proc/1/environ" pid=15508 comm="udevadm" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[86283.956860] kauditd_printk_skb: 15 callbacks suppressed
[86283.956862] audit: type=1400 audit(1636354055.367:238): apparmor="DENIED" operation="capable" profile="/snap/snapd/13640/usr/lib/snapd/snap-confine" pid=15580 comm="snap-confine" capability=4  capname="fsetid"
[86285.465177] audit: type=1400 audit(1636354056.875:239): apparmor="DENIED" operation="open" profile="snap.skanlite.skanlite" name="/proc/sys/kernel/core_pattern" pid=15580 comm="skanlite" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[86285.570033] audit: type=1400 audit(1636354056.979:240): apparmor="DENIED" operation="open" profile="snap.skanlite.skanlite" name="/etc/sane.d/dll.d/" pid=15580 comm="skanlite" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[86285.570037] audit: type=1400 audit(1636354056.979:241): apparmor="DENIED" operation="open" profile="snap.skanlite.skanlite" name="/etc/sane.d/dll.conf" pid=15580 comm="skanlite" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

c'est toujours du charabia pour moi !

Hors ligne

#12 Le 27/11/2021, à 11:57

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

bonjour à tous
je  reviens  sur  mon probleme  de scanner  canon lide 30  non resolu
toujours impossible  de le  faire  travailler sous ubuntu 20.04.3lts.
auriez vous  une  nouvelle  proposition pour  m'aider ?
merci  d'avance

Hors ligne

#13 Le 02/12/2021, à 20:34

Ordissimo1

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Bonjour,
Désolé, je pensais avoir répondu roll
Je vous propose de mettre a jour votre version de sane :

sudo add-apt-repository ppa:sane-project/sane-git
sudo apt-get update
sudo apt install libsane libsane-common sane-utils

Et tester :

scanimage -L

Thierry

Hors ligne

#14 Le 03/12/2021, à 13:47

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

bonjour à tous
me  revoilà
je suis  debordé professionnelement  et ne  me  repenche  sur  ce  problème  qu'à de  rares temps  perdus.
je  viens  de  faire  les  dernieres manipulations proposées  par  Ordissimo1.
voici les  dernieres  lignes  de  codes  apparues  dans le  terminal  à l'issue:

[francois@francois-B250M-DS3H:~$ scanimage -L
device `plustek:libusb:001:008' is a Canon CanoScan N1240U/LiDE30 flatbed scanner
francois@francois-B250M-DS3H:~$ 

Hors ligne

#15 Le 03/12/2021, à 14:13

Ordissimo1

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

big_smile
Donne nous la suite :

scanimage -d 'plustek' > test.pnm

Hors ligne

#16 Le 03/12/2021, à 14:19

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

pas plus de  reponse  de  skanlite
mais  j'ai  cette  boite  de  dialogue : qui me  dit  que  Sane  ne  trouve pas   le  scanner  ( je suis  en  admin)
alors  j'ai tente  dans un terminal ceci :

francois@francois-B250M-DS3H:~$ scanimage > test.pnm
Output format is not set, using pnm as a default.

et là  le  scanner  s'active
en recommencant  voici  de  nouvelles reponse  dans le  terminal mais  je  ne  pige pas 

francois@francois-B250M-DS3H:~$ scanimage > test.pnm
Output format is not set, using pnm as a default.
francois@francois-B250M-DS3H:~$ francois@francois-B250M-DS3H:~$ scanimage > test.pnm
francois@francois-B250M-DS3H:~$ : commande introuvable
francois@francois-B250M-DS3H:~$ Output format is not set, using pnm as a default.

La commande « Output » n'a pas été trouvée, voulez-vous dire :

  commande « output » du deb yagiuda (1.19-9build1)

Essayez : sudo apt install <nom du deb>

francois@francois-B250M-DS3H:~$ sudo apt install yagituda
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet yagituda
francois@francois-B250M-DS3H:~$ sudo apt install yagituda (1.19-9build1)
bash: erreur de syntaxe près du symbole inattendu « ( »
francois@francois-B250M-DS3H:~$ 

Hors ligne

#17 Le 03/12/2021, à 14:22

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

voici la reponse :

francois@francois-B250M-DS3H:~$ scanimage -d 'plustek' > test.pnm
Output format is not set, using pnm as a default.

neanmoins à ce moment là le  scanner  s'active  un peu  sans faire une  numerisation entiere de page
bonne  nouvelle ?

Hors ligne

#18 Le 03/12/2021, à 14:32

Ordissimo1

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

zebone a écrit :

Output format is not set, using pnm as a default.

Sans importance se message

cat test.pnm | more

donne moi l'entête du fichier !

Hors ligne

#19 Le 04/12/2021, à 07:27

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

voici la reponse

francois@francois-B250M-DS3H:~$ cat test.pnm | more
P6
# SANE data follows
202 150
255
&!CMPb3PnFcyAa=^>d4c?kDoGw;lHxJ|ExDzH|G}I}L~MPO~QPS
UY[]a`bgknoru}ȄɄȃ̆̊ΏΑϔЖϙћПѪдЫѲ

ķƾȿȾ

ľ
ûüĿ½½¾ļ¼Ŀļľſžýü,2
53DOx


ǽĽȿƾ
ƾ

üǽŽŽĽ¼üýľľý½ƿſüž
777cr~



ĺȿ

ſžƾĽſſüžĽü
NTS



Ŀƾȿ

ƿŽŽǾ
ļŻù]^Z
--Plus--

Hors ligne

#20 Le 04/12/2021, à 21:48

Ordissimo1

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Bonsoir,
c'est bien un entête de fichier PNM, vous devriez tester votre appareil avec xsane ou simple-scan

Hors ligne

#21 Le 04/12/2021, à 22:15

inbox

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Salut,

Que donnent ces commandes ?

dpkg -l | grep skanlite
snap find skanlite

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#22 Le 05/12/2021, à 14:35

zebone

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

voila le  resultat  de  ces commandes

francois@francois-B250M-DS3H:~$ dpkg -l | grep skanlite
francois@francois-B250M-DS3H:~$ snap find skanlite
Nom       Version         Auteur  Notes  Résumé
skanlite  master+cb382f8  kde✓    -      image scanner based on the KSane backend
francois@francois-B250M-DS3H:~$ 

Hors ligne

#23 Le 05/12/2021, à 15:46

Ordissimo1

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Merci de me donner les retour demandé !

Vous avez 2 problèmes :
1 - faire marcher votre scanner : cela semble résolu, mais je n'ai pas re retour

Ordissimo1 a écrit :

c'est bien un entête de fichier PNM, vous devriez tester votre appareil avec xsane ou simple-scan

2 - Le faire marcher avec skanlite
un test simple a faire

skanlite -d "$(scanimage -f "%d%n" | grep -F plustek)"

Hors ligne

#24 Le 05/12/2021, à 20:51

inbox

Re : scanner canon lide 30 non reconnu et scanlite ne trouve "aucun device"

Vu que tu as installé Skanlite en Snap, il faut ouvrir l'interface qui t'as permis de l'installer. La, tu lui donne les autorisations d'accès pour qu'il puisse utiliser ton scanner.

L'autre solution est de supprimer le Snap et installer le paquet Deb.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne