Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#76 Le 07/10/2020, à 17:33

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Après reboot

mathieu@MatLinux:~$ dkms status
mathieu@MatLinux:~$ dmesg | grep rtw
[    4.924610] rtw_core: loading out-of-tree module taints kernel.
[    4.924729] rtw_core: module verification failed: signature and/or required key missing - tainting kernel
[    4.981991] rtw_8822be 0000:03:00.0: enabling device (0000 -> 0003)
[    4.984947] rtw_8822be 0000:03:00.0: Firmware version 27.2.0, H2C version 13
[    5.665452] rtw_8822be 0000:03:00.0 wlp3s0: renamed from wlan0
[    8.034144] rtw_8822be 0000:03:00.0: start vif 80:c5:f2:3c:b0:95 on port 0
[    8.204413] WARNING: CPU: 1 PID: 943 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[    8.204414] Modules linked in: cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device roles
[    8.204493] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[    8.204517]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[    8.204528]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[    8.204536]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[    8.204806] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   10.204891] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   10.204897] rtw_8822be 0000:03:00.0: mac power on failed
[   10.204899] rtw_8822be 0000:03:00.0: failed to power on mac
[   10.204901] rtw_8822be 0000:03:00.0: leave idle state failed
[   10.205031] rtw_8822be 0000:03:00.0: failed to leave ips state
[   10.205034] rtw_8822be 0000:03:00.0: failed to leave idle state
[   15.958899] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   15.959150] WARNING: CPU: 0 PID: 100 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   15.959151] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[   15.959220] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   15.959236]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   15.959243]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   15.959249]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   15.959253]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   15.959340] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   37.007393] WARNING: CPU: 3 PID: 943 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   37.007394] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[   37.007440] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   37.007456]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   37.007463]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[   37.007468]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[   37.007636] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   38.962934] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   38.962958] rtw_8822be 0000:03:00.0: mac power on failed
[   38.962960] rtw_8822be 0000:03:00.0: failed to power on mac
[   38.962963] rtw_8822be 0000:03:00.0: leave idle state failed
[   38.963096] rtw_8822be 0000:03:00.0: failed to leave ips state
[   38.963099] rtw_8822be 0000:03:00.0: failed to leave idle state
[   44.659498] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   44.659749] WARNING: CPU: 1 PID: 200 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   44.659750] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[   44.659819] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   44.659835]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   44.659841]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   44.659847]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   44.659852]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   44.659938] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   69.787721] WARNING: CPU: 0 PID: 943 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   69.787724] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[   69.787962] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   69.788042]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   69.788069]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[   69.788087]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[   69.788749] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   71.789090] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   71.789095] rtw_8822be 0000:03:00.0: mac power on failed
[   71.789097] rtw_8822be 0000:03:00.0: failed to power on mac
[   71.789099] rtw_8822be 0000:03:00.0: leave idle state failed
[   71.789228] rtw_8822be 0000:03:00.0: failed to leave ips state
[   71.789231] rtw_8822be 0000:03:00.0: failed to leave idle state
[   77.538317] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   77.538567] WARNING: CPU: 3 PID: 100 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   77.538568] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[   77.538638] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   77.538654]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   77.538660]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   77.538666]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   77.538670]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   77.538754] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[  102.513325] WARNING: CPU: 2 PID: 943 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[  102.513326] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[  102.513390] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[  102.513411]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[  102.513421]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[  102.513428]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[  102.513672] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[  104.513805] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[  104.513813] rtw_8822be 0000:03:00.0: mac power on failed
[  104.513816] rtw_8822be 0000:03:00.0: failed to power on mac
[  104.513819] rtw_8822be 0000:03:00.0: leave idle state failed
[  104.513962] rtw_8822be 0000:03:00.0: failed to leave ips state
[  104.513965] rtw_8822be 0000:03:00.0: failed to leave idle state
[  110.263631] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[  110.263894] WARNING: CPU: 3 PID: 140 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[  110.263894] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm crct10dif_pclmul ghash_clmulni_intel snd_seq aesni_intel rtw_8822be(OE) crypto_simd rtw_8822b(OE) uvcvideo cryptd rtw_pci(OE) videobuf2_vmalloc glue_helper snd_seq_device rtw_core(OE) rapl snd_timer intel_cstate videobuf2_memops asus_nb_wmi mac80211 asus_wmi joydev sparse_keymap i915 serio_raw wmi_bmof videobuf2_v4l2 videobuf2_common btusb btrtl 8250_dw btbcm videodev cfg80211 btintel snd input_leds drm_kms_helper libarc4 mc soundcore bluetooth i2c_algo_bit mei_me fb_sys_fops hid_multitouch mei syscopyarea ecdh_generic sysfillrect ecc sysimgblt int3403_thermal intel_xhci_usb_role_switch int3400_thermal processor_thermal_device
[  110.264000] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[  110.264025]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[  110.264034]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[  110.264043]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[  110.264051]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[  110.264193] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5

Logoden Ubuntu 22.04.3 LTS

Hors ligne

#77 Le 08/10/2020, à 07:36

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

@ nico @ xubu Bonjour avez vous vu mes retours d'hier?


Logoden Ubuntu 22.04.3 LTS

Hors ligne

#78 Le 08/10/2020, à 07:40

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Bonjour

Nos derniers échanges >  ./viewtopic.php?pid=22347848#p22347848


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#79 Le 08/10/2020, à 08:04

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Le conseil est donc de revenir à 18.04.
Ou faut-il encore espérer trouver une solution. Si j'opte pour la solution clef wifi il me faudrait savoir quelle type de clef est sur d'être reconnu par 20.04
Merci pour le temps passé et bonne journée


Logoden Ubuntu 22.04.3 LTS

Hors ligne

#80 Le 08/10/2020, à 08:07

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Pour les clés  > Clés Wi-Fi à conseiller


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#81 Le 08/10/2020, à 18:38

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

Bonsoir,

On peut essayer ceci :

sudo sed -i "s/wifi.powersave = 3/wifi.powersave = 2/g" /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf

Ensuite tu redémarres sous windows pour faire fonctionner la WiFi, puis tu rebootes de nouveau sous linux et tu donnes le retour de :

dmesg | grep rtw

Le problème à priori est situé dans le noyau et non pas dans le firmware. Il sera nécessaire d'attendre une éventuelle correction.

Hors ligne

#82 Le 08/10/2020, à 20:10

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Bonsoir voici le retour demandé

mathieu@MatLinux:~$ dmesg | grep rtw
[    4.915377] rtw_core: loading out-of-tree module taints kernel.
[    4.915523] rtw_core: module verification failed: signature and/or required key missing - tainting kernel
[    4.932158] rtw_8822be 0000:03:00.0: enabling device (0000 -> 0003)
[    4.947735] rtw_8822be 0000:03:00.0: Firmware version 27.2.0, H2C version 13
[    5.637967] rtw_8822be 0000:03:00.0 wlp3s0: renamed from wlan0
[    7.974109] rtw_8822be 0000:03:00.0: start vif 80:c5:f2:3c:b0:95 on port 0
[    8.267807] WARNING: CPU: 0 PID: 951 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[    8.267808] Modules linked in: cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles sysimgblt
[    8.267879] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[    8.267903]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[    8.267914]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[    8.267921]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[    8.268185] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   10.268232] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   10.268239] rtw_8822be 0000:03:00.0: mac power on failed
[   10.268241] rtw_8822be 0000:03:00.0: failed to power on mac
[   10.268242] rtw_8822be 0000:03:00.0: leave idle state failed
[   10.268372] rtw_8822be 0000:03:00.0: failed to leave ips state
[   10.268375] rtw_8822be 0000:03:00.0: failed to leave idle state
[   16.002695] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   16.002944] WARNING: CPU: 3 PID: 100 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   16.002944] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles
[   16.003015] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   16.003031]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   16.003037]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   16.003043]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   16.003048]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   16.003136] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   37.015959] WARNING: CPU: 2 PID: 951 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   37.015962] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles
[   37.016122] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   37.016178]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   37.016201]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[   37.016218]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[   37.016821] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   39.016935] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   39.016947] rtw_8822be 0000:03:00.0: mac power on failed
[   39.016949] rtw_8822be 0000:03:00.0: failed to power on mac
[   39.016951] rtw_8822be 0000:03:00.0: leave idle state failed
[   39.017077] rtw_8822be 0000:03:00.0: failed to leave ips state
[   39.017081] rtw_8822be 0000:03:00.0: failed to leave idle state
[   44.782744] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   44.782989] WARNING: CPU: 3 PID: 211 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   44.782990] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles
[   44.783057] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   44.783073]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   44.783078]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   44.783084]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   44.783089]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   44.783175] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   70.004179] WARNING: CPU: 3 PID: 951 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   70.004182] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles
[   70.004427] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   70.004517]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   70.004551]  rtw_leave_ips+0x1f/0x80 [rtw_core]
[   70.004572]  rtw_ops_config+0xa3/0xe0 [rtw_core]
[   70.005218] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[   72.005299] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   72.005305] rtw_8822be 0000:03:00.0: mac power on failed
[   72.005308] rtw_8822be 0000:03:00.0: failed to power on mac
[   72.005309] rtw_8822be 0000:03:00.0: leave idle state failed
[   72.005440] rtw_8822be 0000:03:00.0: failed to leave ips state
[   72.005443] rtw_8822be 0000:03:00.0: failed to leave idle state
[   77.754752] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[   77.755000] WARNING: CPU: 1 PID: 100 at /home/mathieu/rtw88/pci.c:1173 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   77.755000] Modules linked in: rfcomm cmac algif_hash algif_skcipher af_alg bnep binfmt_misc nls_iso8859_1 mei_hdcp intel_rapl_msr snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm rtw_8822be(OE) rtw_8822b(OE) rtw_pci(OE) crct10dif_pclmul uvcvideo rtw_core(OE) ghash_clmulni_intel videobuf2_vmalloc videobuf2_memops aesni_intel snd_rawmidi crypto_simd btusb btrtl mac80211 btbcm btintel cryptd glue_helper videobuf2_v4l2 snd_seq rapl joydev asus_nb_wmi bluetooth intel_cstate i915 videobuf2_common asus_wmi serio_raw wmi_bmof sparse_keymap input_leds snd_seq_device videodev snd_timer mc mei_me ecdh_generic snd 8250_dw ecc cfg80211 drm_kms_helper soundcore mei i2c_algo_bit libarc4 processor_thermal_device hid_multitouch fb_sys_fops intel_rapl_common intel_xhci_usb_role_switch syscopyarea int3403_thermal sysfillrect roles
[   77.755070] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtw_pci]
[   77.755086]  rtw_pci_link_ps+0x54/0x90 [rtw_pci]
[   77.755092]  ? rtw_core_stop+0xab/0xc0 [rtw_core]
[   77.755098]  rtw_enter_ips+0x3e/0x50 [rtw_core]
[   77.755103]  rtw_ops_config+0xd3/0xe0 [rtw_core]
[   77.755190] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5

Logoden Ubuntu 22.04.3 LTS

Hors ligne

#83 Le 08/10/2020, à 20:11

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Bonsoir,
Je n'avais même pas pensé à la solution windows. Comme quoi je suis totalement désintoxiqué. J'ai effectivement pu me connecté sans PB au réseau wifi sous Win.
J'espère qu'une correction du noyau va pouvoir régler le problème rapidement. En attendant, je vais opter pour une clef wifi nano des demain et enfin me décrocher du câble Ethernet auquel je suis accroché depuis dimanche. Pourrions nous créer une discussion qui suivrait l’évolution des pilotes ayant un problème dont le  RTL8822BE???
Merci d'avoir passé tous ce temps pour m'aider dans mon problème qui trouvera je l'espère une solution d'ici peu... A suivre


Logoden Ubuntu 22.04.3 LTS

Hors ligne

#84 Le 08/10/2020, à 20:24

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Ce sont les ingénieurs de Realtek qui doivent procéder aux corrections de leurs pilotes, pour Linux.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#85 Le 08/10/2020, à 20:27

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

Dans le doute, passe cette commande :

sudo update-initramfs

Puis tu redémarres sous windows pour faire fonctionner la WiFi, puis tu rebootes de nouveau sous linux et tu donnes le retour de :

dmesg | grep rtw

(le passage sous windows est pour faire un reset du composant WiFi).

Hors ligne

#86 Le 08/10/2020, à 20:27

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

xubu1957 a écrit :

Ce sont les ingénieurs de Realtek qui doivent procéder aux corrections de leurs pilotes, pour Linux.

A priori, c'est plutôt un beau bug sur pci.c qui fait partie du noyau

Hors ligne

#87 Le 08/10/2020, à 20:49

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Plus de wifi non plus sous windows.
Et plus d’accès à la carte wifi sous 20.04
Voici le retour

mathieu@MatLinux:~$ dmesg | grep rtw
[    4.715705] rtw_core: loading out-of-tree module taints kernel.
[    4.715830] rtw_core: module verification failed: signature and/or required key missing - tainting kernel
[    4.757237] rtw_8822be 0000:03:00.0: Firmware version 27.2.0, H2C version 13
[    4.777741] rtw_8822be 0000:03:00.0: Refused to change power state, currently in D3
[    4.781158] rtw_8822be 0000:03:00.0: mac power on failed
[    4.781163] rtw_8822be 0000:03:00.0: failed to power on mac
[    4.781166] rtw_8822be 0000:03:00.0: failed to setup chip efuse info
[    4.781169] rtw_8822be 0000:03:00.0: failed to setup chip information
[    4.788538] rtw_8822be: probe of 0000:03:00.0 failed with error -114

Logoden Ubuntu 22.04.3 LTS

Hors ligne

#88 Le 08/10/2020, à 20:50

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Et donc, c'est la communauté qui doit se débrouiller pour le corriger ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#89 Le 08/10/2020, à 20:53

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

@xubu : le bug n'est psa chez realtek, c'est le noyau. Realtek n'en sont pas responsables. Ca arrive...

@Logoden, essaie de relancer la WiFi sous windows en arrêtant le PC, le bug sous linux met la puce dans un état dans lequel elle ne communique plus. Et c'est très embêtant sur un portable car un vrai hard reset nécessite de retirer la batterie.

Hors ligne

#90 Le 08/10/2020, à 20:58

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

@Nico

Pour info :

> github.com/lwfinger/rtw88/issues/10#issuecomment-670212084 RTL8822BE Not working on kernel 5.7.12


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#91 Le 08/10/2020, à 21:03

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

xubu1957 a écrit :

> github.com/lwfinger/rtw88/issues/10#issuecomment-670212084 RTL8822BE Not working on kernel 5.7.12

Pas vraiment exploitable dans notre cas car visiblement il y avait un problème de contact. Par contre L. Finger donne une information intéressante, la partie WiFi est gérée sur le port PCI et la partie bluetooth, sur le port USB

Hors ligne

#92 Le 08/10/2020, à 21:09

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Et l'ancien github de jeremy31 > https://ubuntuforums.org/showthread.php … st13775193, s'appuyait sur l'USB ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#93 Le 08/10/2020, à 21:25

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

btusb.c

A priori, oui, il s'appuyait sur l'USB. A priori, pas uniquement pour le rtl8822

Hors ligne

#94 Le 08/10/2020, à 21:46

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

@nico, après une extinction forcé, le wifi est de nouveau opérationnel sous wind et la carte de nouveau visible mais toujours inactive sous 20.04
La procedure de @rhysperry111  rhysperry111
Soit: Éteindre / Supprimer physiquement RTL8822BE / Allumer / Éteindre / Remettez RTL8822BE /Allumer
C'est ce que @nico m'a entre autre fait faire avec les lignes de commande???


Logoden Ubuntu 22.04.3 LTS

Hors ligne

#95 Le 09/10/2020, à 06:48

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

Bonjour,

L'objectif de la procédure de @rhysperry111 est de reseter le module WiFi. Nous arrivons à le faire en passant par Windows. Ne te lance pas dans celle-ci, débrancher physiquement le module n'est potentiellement pas possible sur ta machine. (Et de toutes façons, ça n'apportera rien de plus).

Pour l'instant, je ne sais rien te proposer de plus. On peut toujours essayer de compiler le noyau avec la modif dans pci.c, mais il me faut du temps pour préparer la manip. Donne moi STP le retour de :

sudo lshw -class cpu

Hors ligne

#96 Le 09/10/2020, à 07:16

Logoden

Re : [Résolu]Installation du pilote RTL8822BE

Bonjour
Voici le retour

mathieu@MatLinux:~$ sudo lshw -class cpu
[sudo] Mot de passe de mathieu : 
  *-cpu                     
       description: CPU
       produit: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
       fabricant: Intel Corp.
       identifiant matériel: 11
       information bus: cpu@0
       version: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
       numéro de série: To Be Filled By O.E.M.
       emplacement: U3E1
       taille: 818MHz
       capacité: 4005MHz
       bits: 64 bits
       horloge: 100MHz
       fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
       configuration : cores=2 enabledcores=2 threads=4

Logoden Ubuntu 22.04.3 LTS

Hors ligne

#97 Le 10/10/2020, à 09:12

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

NicoApi73 a écrit :
xubu1957 a écrit :

Ce sont les ingénieurs de Realtek qui doivent procéder aux corrections de leurs pilotes, pour Linux.

A priori, c'est plutôt un beau bug sur pci.c qui fait partie du noyau

Salut,

Au temps pour moi, il semblerait que ce soit le pci.c de rtw88 qui est en cause. Donc, ce serait bien Realtek (une fois de plus).

Par contre par rapport à ce qui est dit ici https://bugzilla.kernel.org/show_bug.cgi?id=206411#c13, le pilote de L. Finger devrait fonctionner avec l'option pcie_aspm=off. Je repasserai tout à l'heure pour proposer un essai

Dernière modification par NicoApi73 (Le 10/10/2020, à 09:14)

Hors ligne

#98 Le 10/10/2020, à 09:19

xubu1957

Re : [Résolu]Installation du pilote RTL8822BE

Bonjour,

Realtek

Je ne chinoiserai pas ! lol


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#99 Le 10/10/2020, à 14:41

NicoApi73

Re : [Résolu]Installation du pilote RTL8822BE

Nuliel a écrit :

Est ce que les logs du crash changent lorsque aspm est désactivé? (je sais pas si ton grep a inclus le crash du pilote s'il a eu lieu)
Au passage le secure boot est désactivé?

Oui les retours changent. Par contre, à tort, je n'ai jamais demandé de retour dmesg complet.

On voit en mode normal :

[  120.760510] rtw_8822be 0000:03:00.0: failed to read ASPM, ret=-5
[  134.212112] rtw_8822be 0000:03:00.0: stop vif 80:c5:f2:3c:b0:95 on port 0
[  136.213104] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[  147.786646] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  147.787053] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  147.816597] rtw_8822be 0000:03:00.0: Firmware version 13.1.0, H2C version 6
[  147.829240] rtw_8822be 0000:03:00.0: Refused to change power state, currently in D3
[  147.831241] rtw_8822be 0000:03:00.0: mac power on failed
[  147.831246] rtw_8822be 0000:03:00.0: failed to power on mac
[  147.831248] rtw_8822be 0000:03:00.0: failed to setup chip efuse info
[  147.831249] rtw_8822be 0000:03:00.0: failed to setup chip information
[  147.831718] rtw_8822be: probe of 0000:03:00.0 failed with error -114

et avec pcie_aspm=off

mathieu@MatLinux:~$ dmesg | grep rtw
[    5.239304] rtw_8822be 0000:03:00.0: enabling device (0000 -> 0003)
[    5.240367] rtw_8822be 0000:03:00.0: Firmware version 27.2.0, H2C version 13
[    5.339197] rtw_8822be 0000:03:00.0: failed to download firmware
[    7.339274] rtw_8822be 0000:03:00.0: failed to poll offset=0x5 mask=0x2 value=0x0
[    7.339278] rtw_8822be 0000:03:00.0: failed to setup chip efuse info
[    7.339281] rtw_8822be 0000:03:00.0: failed to setup chip information
[    7.342318] rtw_8822be: probe of 0000:03:00.0 failed with error -16

Hors ligne

#100 Le 10/10/2020, à 14:43

Nuliel

Re : [Résolu]Installation du pilote RTL8822BE

Du coup Logoden peux tu fournir le retour de

dmesg

HS: je crois qu'au semestre prochain, je vais travailler la programmation en espace kernel

Dernière modification par Nuliel (Le 10/10/2020, à 14:44)

Hors ligne