[RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

moko138 · Le 09/11/2016, à 09:47

Skubu a écrit :

L'option "discard" n'est-elle pas déconseillée ?

Sur ce point, je ne suis pas compétent. Un expert m'avait dit qu'à partir de 14.04, l'installateur savait reconnaître les SSD et s'y adapter.
Mais avec des logs du 7 février 2014, on est en présence d'une installation par mises à niveau d'une version antérieure à 14.04.
Dans ces conditions, faut-il ou non mettre dans fstab des options telles que "discard" (et "noatime") ? Aucune idée.
- -

Coeur Noir a écrit :

Le fstab est manifestement bizarre, ça m'avait échappé, mais pourquoi ne pose-t-il problème qu'aujourd'hui - puisqu'on peut supposer qu'il est dans cet état depuis un certain temps ?

Oui il est ancien, et il fonctionnait.
Ma correction a consisté d'une part à supprimer des incohérences et des redondances,
d'autre part à réactiver l'enregistrement des logs, au moins pour le temps du dépannage.
SI le dépannage réussit, il faudra une nouvelle version de fstab.
- -

Dans les 30 dernières lignes de kern.log et de syslog, je ne vois rien qui manifeste un plantage du système. Au contraire, le système en est à gérer la wifi.
(La carte wifi est encore étiquetée "wlan0", comme dans 14.04. C'est la 2ème fois que je vois cela et j'ignore
si c'est normal après une mise à niveau de 14.04,
ou si c'est le signe d'une mise à niveau partiellement ratée.)

"quiet splash" est activé, cela empêche de voir pendant le démarrage ce qui échoue ou ce qui ralentit le démarrage. ==>
Tu touches ici du doigt l'intérêt de virer systématiquement cette option.

Ma conclusion provisoire :
Il est possible que l'échec n'affecte que le serveur graphique. Donc démarre la version installée - si tu peux, via les "options avancées" de grub, choisir "startup", ce sera encore mieux - et après le message

/dev/sda1: clean

tape
Ctrl Alt F1
et ne quitte plus l'écran des yeux,
soit pour repérer les lignes qui s'attardent et les lignes qui se terminent par du rouge, (si trop fugitives, tu peux les photographier sans flash et en résolution modérée),
soit pour guetter l'apparition de

login:

Cette dernière éventualité est la plus favorable.
Si non :

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/gpu-manager.log | grep -Ei "error|fail"
cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/kern.log | grep -Ei "error|fail"
cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/syslog | grep -Ei "error|fail"

et, si tu as utilisé "startup" plutôt que "systemd" :

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/dmesg | grep -Ei "error|fail"

De plus je ferai appel aux bonnes volontés pour exploiter

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/Xorg.0.log

et les contenus de
/media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/var/log/samba/
qui sont en-dehors de mes compétences.

Je serai de retour dans l'après-midi.

Skubu · Le 09/11/2016, à 11:03

J'ai installé 2 Linux Mint 18 (base ubuntu 16.04) la semaine dernière, et point d'option discard dans les fstab... Ce à quoi vous me répondrez peut-être: "oui mais linux mint n'est pas ubuntu..." Certes, mais ici https://wiki.archlinux.fr/SSD#TRIM même s'il n'y a aucune source, on le déconseille. Dans le doute, je préfère retirer l'option et appliquer un fstrim périodique. D'ailleurs, c'était déjà fait sous linux mint (/etc/cron.d/weekly/fstrim)...
Sur l'arch wiki anglophone https://wiki.archlinux.org/index.php/So … iodic_TRIM on semble également aller dans le même sens...

Sur l'option noatime, je citerai également ces mêmes pages... plutôt favorable donc.
Désolé d'être un peu pro arch wiki mais c'est un des plus complets à mes yeux et très à jour qui plus est.

Je ne suis pas spécialiste X.org mais mis à part des modules non chargés et remplacés par d'autres, je ne vois rien qui puisse empêcher le bon démarrage du serveur X.
On peut essayer avec Wayland ?

Si mise à niveau il y a eu, cela signifie réinstallation système pour moi. Qui a eu cette idée saugrenue de la lancer ?

Satire · Le 09/11/2016, à 19:55

De mon téléphone portable... alors en appuyant sur Ctrl Alt F1 j'obtiens la première option: login

Ensuite l'écrance se fige sur login, et rien d'autre n'apparait par la suite...

Connecté de nouveau en live session...

Je ne sais pas trop si au final ce serait utile de poster une photo de l'écran où apparaît "login"... mais je n'ai pas réussi, je n'arrive pas à trouver dans les icônes du dessus l'option concernée...

Faites le moi savoir, au cas où c'est nécessaire ou utile ?

Dernière modification par Satire (Le 09/11/2016, à 22:04)

moko138 · Le 09/11/2016, à 23:22

Satire a écrit :

De mon téléphone portable... alors en appuyant sur Ctrl Alt F1 j'obtiens la première option: login

Excellent !

Tape

azerty , ;  mlkj 456

pour vérifier que ton clavier est dans la bonne config.
Si besoin d'activer le pavé numérique, appuie sur la touche VerrNum (verrouillage numérique).
Si besoin de passer en azerty, tape

setxkb,qp fr

en sorte de lire à l'écran :

setxkbmap fr

et re-vérifie que tu es bien en azerty.

Si ça n'a pas suffi, tente

loqdkeys fr

en sorte de lire à l'écran :

loadkeys fr

- -
Puis, si besoin, efface ce qui resterait à droite de

login:

- -
Il reste à taper ton login
à valider par Entrée,
à attendre que s'affiche

Password:

Alors tu tapes ton mot de passe à l'aveugle,
et valides par Entrée.
Et quelques secondes plus tard, tu devrais avoir l'invite de commande :

ton-login@ton-pc:

Là, tente, SANS "sudo"

startx

et dis-nous soigneusement le message d'erreur.
Si ça nécessite de poster une photo d'écran, pense à passer par un hébergeur comme pix.tdct.org.

moko138 · Le 09/11/2016, à 23:27

J'ajoute : si tu arrives ainsi à te loguer en console, avant "startx", fais

dmesg > dmesg.txt

ça nous servira ensuite.

Satire · Le 10/11/2016, à 00:16

Salut Moko138,

J'ai d'énormes difficultés à poster la photo, le site indiqué n'a pas fonctionné pour moi, après avoir cliqué sur envoyé, rien ne s'est passé... j'ai dû donc retourné à mon téléphone portable, faire cela dessus et recopier le code sur mon ordinateur... Photo erreur

Alors voici la photo du résultat des manipulations en #29 :

Je n'ai pas pu procéder à la commande en #30, car j'avais déjà terminé et redémarré en live session lorsque j'ai vu le dernier message...

Je procède à la commande demandée en #30 maintenant et revient t'envoyer le résultat.

Satire · Le 10/11/2016, à 00:21

Bon, je m'aperçois que je ne suis pas très habile... voici le lien de la photo : http://pix.tdct.org/?img=1478729039.jpg

Je pense que tu devrais pouvoir y avoir accès ?

Satire · Le 10/11/2016, à 00:53

Voici pour la seconde commande du message #30 :

http://pix.tdct.org/upload/original/1478731792.jpg

Il a l'air de ne pas y avoir eu de réponse à la commande ?

moko138 · Le 10/11/2016, à 00:59

Oui... oh pétard, 2,4 Mo !!!
AJOUT : Le même texte allégé 48 fois, pour éviter à ceux qui prennent le fil de se farcir 2,4 Mo, avec la pollution correspondante :

FIN d'ajout

Enfin bref, la solution n'est plus loin, tu arrives à te loger en console - j'aurais dû te faire faire le test dès le début - il y a un problème graphique :
Bien que tu utilises un noyau 4.4, ton serveur X.org est construit sur le noyau 3.13 :

Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu

Il y a un cas récent similaire sur le forum, mais où, déjà ?
AJOUT : C'était là ./viewtopic.php?id=1997218 et hger a choisi de réinstaller une 14.04, 64 bits. Nickel.
Il a retenté la mise à niveau : re-plantage. ==> Réinstallation de 14.04.

À noter : Bougron avait signalé que le "Build Operating System: Linux 3.13..." fonctionnait parfaitement dans sa 16.04 !
FIN d'ajout

Redémarre en live
et donne le fichier dmesg.txt :

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/home/sat/dmesg.txt

- -

Maintenant, ce sont les spécialistes du graphique qui vont te guider.

Dernière modification par moko138 (Le 10/11/2016, à 02:49)

Satire · Le 10/11/2016, à 01:06

Merci Moko138, cela me rassure d'apprendre que la solution n'est plus très loin... car, bientôt quatre jours sans ordinateur, c'est vraiment pas pratique du TOUT et PLUS qu'handicapant...

Voici le retour de la commande donc :

[    0.881776] io scheduler deadline registered (default)
[    0.881818] io scheduler cfq registered
[    0.882869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.882877] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.882915] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    0.882917] vesafb: scrolling: redraw
[    0.882919] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.882942] vesafb: framebuffer at 0xf3000000, mapped to 0xffffc90000800000, using 4032k, total 4032k
[    0.883072] Console: switching to colour frame buffer device 160x50
[    0.883100] fb0: VESA VGA frame buffer device
[    0.883118] intel_idle: does not run on family 6 model 23
[    0.883220] ACPI: AC Adapter [AC] (on-line)
[    0.883295] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.028358] ACPI: Lid Switch [LID]
[    1.028409] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.028412] ACPI: Power Button [PBTN]
[    1.028459] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.028461] ACPI: Sleep Button [SBTN]
[    1.028552] Monitor-Mwait will be used to enter C-1 state
[    1.028566] Monitor-Mwait will be used to enter C-2 state
[    1.028577] Monitor-Mwait will be used to enter C-3 state
[    1.028585] tsc: Marking TSC unstable due to TSC halts in idle
[    1.028600] ACPI: acpi_idle registered with cpuidle
[    1.029197] thermal LNXTHERM:00: registered as thermal_zone0
[    1.029199] ACPI: Thermal Zone [THM] (67 C)
[    1.029234] GHES: HEST is not enabled!
[    1.036095] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.043300] Linux agpgart interface v0.103
[    1.047065] ACPI: Battery Slot [BAT0] (battery present)
[    1.050482] brd: module loaded
[    1.052159] loop: module loaded
[    1.052316] ata_piix 0000:00:1f.1: version 2.13
[    1.053076] scsi host0: ata_piix
[    1.053218] scsi host1: ata_piix
[    1.053268] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.053270] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.053397] libphy: Fixed MDIO Bus: probed
[    1.053400] tun: Universal TUN/TAP device driver, 1.6
[    1.053401] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.053440] ata2: port disabled--ignoring
[    1.053478] PPP generic driver version 2.4.2
[    1.053555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.053561] ehci-pci: EHCI PCI platform driver
[    1.053730] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.053738] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.053753] ehci-pci 0000:00:1a.7: debug port 1
[    1.057672] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.057684] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.068041] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.068131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.068140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068142] usb usb1: Product: EHCI Host Controller
[    1.068144] usb usb1: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    1.068146] usb usb1: SerialNumber: 0000:00:1a.7
[    1.068312] hub 1-0:1.0: USB hub found
[    1.068320] hub 1-0:1.0: 4 ports detected
[    1.068639] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.068646] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.068660] ehci-pci 0000:00:1d.7: debug port 1
[    1.072565] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.072577] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.084230] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.084296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.084301] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.084310] usb usb2: Product: EHCI Host Controller
[    1.084312] usb usb2: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    1.084314] usb usb2: SerialNumber: 0000:00:1d.7
[    1.084468] hub 2-0:1.0: USB hub found
[    1.084475] hub 2-0:1.0: 6 ports detected
[    1.084715] ehci-platform: EHCI generic platform driver
[    1.084728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.084732] ohci-pci: OHCI PCI platform driver
[    1.084746] ohci-platform: OHCI generic platform driver
[    1.084755] uhci_hcd: USB Universal Host Controller Interface driver
[    1.084896] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.084904] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.084912] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.084934] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    1.084984] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.084986] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.084988] usb usb3: Product: UHCI Host Controller
[    1.084990] usb usb3: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.084992] usb usb3: SerialNumber: 0000:00:1a.0
[    1.085143] hub 3-0:1.0: USB hub found
[    1.085150] hub 3-0:1.0: 2 ports detected
[    1.085399] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.085406] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.085413] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.085439] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    1.085490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.085492] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085494] usb usb4: Product: UHCI Host Controller
[    1.085496] usb usb4: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.085498] usb usb4: SerialNumber: 0000:00:1a.1
[    1.085644] hub 4-0:1.0: USB hub found
[    1.085651] hub 4-0:1.0: 2 ports detected
[    1.085900] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.085906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.085916] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.085937] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    1.085985] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.085988] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085990] usb usb5: Product: UHCI Host Controller
[    1.085992] usb usb5: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.085993] usb usb5: SerialNumber: 0000:00:1d.0
[    1.086143] hub 5-0:1.0: USB hub found
[    1.086152] hub 5-0:1.0: 2 ports detected
[    1.086397] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.086403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.086411] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.086432] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    1.086484] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.086487] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086489] usb usb6: Product: UHCI Host Controller
[    1.086491] usb usb6: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.086493] usb usb6: SerialNumber: 0000:00:1d.1
[    1.086642] hub 6-0:1.0: USB hub found
[    1.086650] hub 6-0:1.0: 2 ports detected
[    1.086892] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.086899] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.086906] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.086927] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.086977] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.086979] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086981] usb usb7: Product: UHCI Host Controller
[    1.086983] usb usb7: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.086985] usb usb7: SerialNumber: 0000:00:1d.2
[    1.087136] hub 7-0:1.0: USB hub found
[    1.087144] hub 7-0:1.0: 2 ports detected
[    1.087320] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.098380] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.098385] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.098582] mousedev: PS/2 mouse device common for all mice
[    1.099063] rtc_cmos 00:03: RTC can wake from S4
[    1.099257] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.099290] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.099298] i2c /dev entries driver
[    1.099362] device-mapper: uevent: version 1.0.3
[    1.099458] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.099476] ledtrig-cpu: registered to indicate activity on CPUs
[    1.099949] NET: Registered protocol family 10
[    1.100201] NET: Registered protocol family 17
[    1.100215] Key type dns_resolver registered
[    1.100423] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[    1.100429] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[    1.100494] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.100729] registered taskstats version 1
[    1.100744] Loading compiled-in X.509 certificates
[    1.101817] Loaded X.509 cert 'Build time autogenerated kernel key: 5295ae568fdd4deae5e4e5c175542790e6aaeab9'
[    1.101837] zswap: loaded using pool lzo/zbud
[    1.104121] Key type trusted registered
[    1.107657] Key type encrypted registered
[    1.107662] AppArmor: AppArmor sha1 policy hashing enabled
[    1.107667] ima: No TPM chip found, activating TPM-bypass!
[    1.107691] evm: HMAC attrs: 0x1
[    1.108121]   Magic number: 8:863:400
[    1.108255] rtc_cmos 00:03: setting system clock to 2016-11-09 22:24:00 UTC (1478730240)
[    1.109098] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.109099] EDD information not available.
[    1.109164] PM: Hibernation image not present or could not be loaded.
[    1.126253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.221846] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.221848] Write protecting the kernel read-only data: 14336k
[    1.222887] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[    1.223346] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    1.233946] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234044] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234061] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234080] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234625] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234685] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234876] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234950] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.235020] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.235089] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.289248] [drm] Initialized drm 1.1.0 20060810
[    1.290049] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.302310] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.319210] sky2: driver version 1.30
[    1.326431] sdhci: Secure Digital Host Controller Interface driver
[    1.326434] sdhci: Copyright(c) Pierre Ossman
[    1.328083] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
[    1.330171] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.330386] acpi device:30: registered as cooling_device2
[    1.330519] wmi: Mapper loaded
[    1.330746] sky2 0000:09:00.0 eth0: addr 00:23:ae:08:cd:17
[    1.330817] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input5
[    1.336305] ahci 0000:00:1f.2: version 3.0
[    1.336590] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.336593] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.350352] sdhci-pci 0000:03:09.1: No vmmc regulator found
[    1.350356] sdhci-pci 0000:03:09.1: No vqmmc regulator found
[    1.351053] scsi host2: ahci
[    1.354996] scsi host3: ahci
[    1.357087] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
[    1.359532] scsi host4: ahci
[    1.359606] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 29
[    1.359608] ata4: DUMMY
[    1.359611] ata5: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 29
[    1.360405] checking generic (f3000000 3f0000) vs hw (e0000000 10000000)
[    1.360407] checking generic (f3000000 3f0000) vs hw (f2000000 2000000)
[    1.360409] fb: switching to nouveaufb from VESA VGA
[    1.360443] Console: switching to colour dummy device 80x25
[    1.360588] nouveau 0000:01:00.0: NVIDIA G84 (084700a2)
[    1.380022] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.385938] nouveau 0000:01:00.0: bios: version 60.84.5e.00.08
[    1.407889] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[    1.436286] firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.466558] [TTM] Zone  kernel: Available graphics memory: 2022562 kiB
[    1.466560] [TTM] Initializing pool allocator
[    1.466572] [TTM] Initializing DMA pool allocator
[    1.466590] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[    1.466592] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.466597] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    1.466599] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.466602] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[    1.466605] nouveau 0000:01:00.0: DRM: DCB outp 01: 02012300 00000028
[    1.466607] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021312 00020010
[    1.466609] nouveau 0000:01:00.0: DRM: DCB outp 03: 010333f1 00c0c080
[    1.466611] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040
[    1.466614] nouveau 0000:01:00.0: DRM: DCB conn 01: 1161
[    1.466616] nouveau 0000:01:00.0: DRM: DCB conn 02: 0200
[    1.466618] nouveau 0000:01:00.0: DRM: DCB conn 03: 0310
[    1.466620] nouveau 0000:01:00.0: DRM: DCB conn 04: 0311
[    1.466622] nouveau 0000:01:00.0: DRM: DCB conn 05: 0313
[    1.475431] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[    1.475434] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[    1.475464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.475466] [drm] Driver supports precise vblank timestamp query.
[    1.492647] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[    1.517132] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640
[    1.517135] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.517137] usb 1-1: Product: Laptop Integrated Webcam
[    1.517139] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1
[    1.584044] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    1.676074] ata5: SATA link down (SStatus 0 SControl 300)
[    1.676127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.706889] ata3.00: ATA-8: SanDisk SDSSDH060GG25, 365A13F0, max UDMA/133
[    1.706891] ata3.00: 117231408 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    1.762083] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
[    1.762086] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.762088] usb 7-2: Product: BCM2045B2
[    1.762090] usb 7-2: Manufacturer: Broadcom
[    1.765119] hub 7-2:1.0: USB hub found
[    1.766700] ata3.00: configured for UDMA/133
[    1.766821] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SDSSDH06 13F0 PQ: 0 ANSI: 5
[    1.767088] hub 7-2:1.0: 3 ports detected
[    1.767139] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    1.767214] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.767225] sd 2:0:0:0: [sda] Write Protect is off
[    1.767228] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.767254] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.767839]  sda: sda1 sda2 < sda5 >
[    1.768196] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.812051] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.876063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23ef2aa9b3f, max_idle_ns: 440795290968 ns
[    1.936563] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[    1.940138] firewire_core 0000:03:09.0: created device fw0: GUID 444fc00002129c90, S400
[    2.048050] usb 7-2.2: new full-speed USB device number 3 using uhci_hcd
[    2.181058] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502
[    2.181061] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.181071] usb 7-2.2: Manufacturer: Broadcom Corp
[    2.187965] hidraw: raw HID events driver (C) Jiri Kosina
[    2.193266] usbcore: registered new interface driver usbhid
[    2.193268] usbhid: USB HID core driver
[    2.194071] usb 3-2: New USB device found, idVendor=0483, idProduct=2016
[    2.194074] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.194076] usb 3-2: Product: Biometric Coprocessor
[    2.194078] usb 3-2: Manufacturer: STMicroelectronics
[    2.195690] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/0003:0A5C:4502.0001/input/input7
[    2.248144] hid-generic 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[    2.256045] usb 7-2.3: new full-speed USB device number 4 using uhci_hcd
[    2.393078] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503
[    2.393081] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.393084] usb 7-2.3: Manufacturer: Broadcom Corp
[    2.401646] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/0003:0A5C:4503.0002/input/input8
[    2.401775] hid-generic 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[    2.698552] nouveau 0000:01:00.0: DRM: allocated 1280x800 fb: 0x70000, bo ffff880034e9a800
[    2.698658] fbcon: nouveaufb (fb0) is primary device
[    2.698747] Console: switching to colour frame buffer device 160x50
[    2.698775] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.708082] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.792501] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    2.906558] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.906681] systemd[1]: Detected architecture x86-64.
[    2.906953] systemd[1]: Set hostname to <sat-XPS-M1530>.
[    3.029635] systemd[1]: Reached target Remote File Systems (Pre).
[    3.029728] systemd[1]: Listening on udev Control Socket.
[    3.029748] systemd[1]: Reached target User and Group Name Lookups.
[    3.029822] systemd[1]: Listening on Journal Audit Socket.
[    3.029861] systemd[1]: Listening on Syslog Socket.
[    3.029916] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.030025] systemd[1]: Created slice System Slice.
[    3.030075] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.030100] systemd[1]: Reached target Remote File Systems.
[    3.030117] systemd[1]: Reached target Encrypted Volumes.
[    3.030148] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.030281] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.030334] systemd[1]: Listening on Journal Socket.
[    3.040271] systemd[1]: Starting Journal Service...
[    3.040804] systemd[1]: Mounting Huge Pages File System...
[    3.041495] systemd[1]: Mounting POSIX Message Queue File System...
[    3.042427] systemd[1]: Started Read required files in advance.
[    3.043209] systemd[1]: Starting Uncomplicated firewall...
[    3.047521] systemd[1]: Starting Load Kernel Modules...
[    3.048183] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.049686] systemd[1]: Mounting Debug File System...
[    3.051137] systemd[1]: Started Braille Device Support.
[    3.051943] systemd[1]: Starting Set console keymap...
[    3.052080] systemd[1]: Created slice User and Session Slice.
[    3.052126] systemd[1]: Reached target Slices.
[    3.052214] systemd[1]: Listening on udev Kernel Socket.
[    3.052307] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.056750] systemd[1]: Started Uncomplicated firewall.
[    3.057136] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.062847] systemd[1]: Mounted Debug File System.
[    3.062899] systemd[1]: Mounted POSIX Message Queue File System.
[    3.062926] systemd[1]: Mounted Huge Pages File System.
[    3.069548] lp: driver loaded but no devices found
[    3.085154] ppdev: user-space parallel port driver
[    3.089776] systemd[1]: Started Load Kernel Modules.
[    3.132188] systemd[1]: Starting Apply Kernel Variables...
[    3.132797] systemd[1]: Mounting FUSE Control File System...
[    3.133461] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.135078] systemd[1]: Mounted FUSE Control File System.
[    3.142135] systemd[1]: Started Apply Kernel Variables.
[    3.149004] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.162618] systemd[1]: Started Set console keymap.
[    3.170194] systemd[1]: Started Journal Service.
[    3.221830] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    3.309307] systemd-journald[207]: Received request to flush runtime journal from PID 1
[    3.497933] audit: type=1400 audit(1478730242.884:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=461 comm="apparmor_parser"
[    3.497944] audit: type=1400 audit(1478730242.884:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium" pid=461 comm="apparmor_parser"
[    3.523082] audit: type=1400 audit(1478730242.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=460 comm="apparmor_parser"
[    3.523092] audit: type=1400 audit(1478730242.908:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=460 comm="apparmor_parser"
[    3.533814] audit: type=1400 audit(1478730242.920:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=471 comm="apparmor_parser"
[    3.533825] audit: type=1400 audit(1478730242.920:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium" pid=471 comm="apparmor_parser"
[    3.542969] random: nonblocking pool is initialized
[    3.543301] audit: type=1400 audit(1478730242.928:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[    3.543310] audit: type=1400 audit(1478730242.928:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[    3.543316] audit: type=1400 audit(1478730242.928:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=472 comm="apparmor_parser"
[    3.794105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.891795] r592: driver successfully loaded
[    3.927432] r852: driver loaded successfully
[    3.977582] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[    3.977586] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[    3.977652] iwl4965 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.977820] iwl4965 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[    4.020540] iwl4965 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5
[    4.020564] iwl4965 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[    4.026525] iwl4965 0000:0b:00.0: loaded firmware version 228.61.2.24
[    4.058562] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[    4.069160] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k SSFS
[    4.087307] kvm: disabled by bios
[    4.123054] snd_hda_codec_idt hdaudioC0D2: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    4.123056] snd_hda_codec_idt hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.123058] snd_hda_codec_idt hdaudioC0D2:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[    4.123059] snd_hda_codec_idt hdaudioC0D2:    mono: mono_out=0x0
[    4.123061] snd_hda_codec_idt hdaudioC0D2:    dig-out=0x21/0x0
[    4.123062] snd_hda_codec_idt hdaudioC0D2:    inputs:
[    4.123064] snd_hda_codec_idt hdaudioC0D2:      Internal Mic=0x13
[    4.123065] snd_hda_codec_idt hdaudioC0D2:      Mic=0xe
[    4.144973] media: Linux media interface: v0.10
[    4.166094] Linux video capture interface: v2.00
[    4.197379] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.259734] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[    4.261429] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9
[    4.261502] usbcore: registered new interface driver uvcvideo
[    4.261504] USB Video Class driver (1.1.1)
[    4.318925] cgroup: new mount options do not match the existing superblock, will be ignored
[    4.327285] input: Dell WMI hotkeys as /devices/virtual/input/input10
[    4.365988] gpio_ich: GPIO from 462 to 511 on gpio_ich
[    4.515859] cfg80211: World regulatory domain updated:
[    4.515863] cfg80211:  DFS Master region: unset
[    4.515865] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.515868] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515870] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515872] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515874] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.515876] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.515879] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.515881] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515883] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.537673] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.537846] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.114890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.361058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.368820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.371483] sky2 0000:09:00.0 eth0: enabling interface
[    5.371624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.489506] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.715924] wlan0: authenticate with 74:44:01:f3:54:fc
[    7.734198] wlan0: send auth to 74:44:01:f3:54:fc (try 1/3)
[    7.736131] wlan0: authenticated
[    7.736264] wlan0: waiting for beacon from 74:44:01:f3:54:fc
[    7.812052] wlan0: associate with 74:44:01:f3:54:fc (try 1/3)
[    7.823771] wlan0: RX AssocResp from 74:44:01:f3:54:fc (capab=0x411 status=0 aid=2)
[    7.851348] wlan0: associated
[    7.851402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ubuntu@ubuntu:~$

moko138 · Le 10/11/2016, à 01:09

Satire a écrit :

Il a l'air de ne pas y avoir eu de réponse à la commande ?

C'est tout à fait normal :
la redirection ">" envoie le retour de commande, non à l'écran, mais dans le fichier que tu nommes derrière. Donc dans dmesg.txt
D'où ma dernière demande en live.

Satire · Le 10/11/2016, à 01:19

Ah, d'accord, il y a effectivement souvent des raisons cachées qui n'apparaissent pas aux communs des mortels...

Un grand merci à toi Moko138, pour ta précieuse aide !

Dans l'attente donc qu'une autre âme bienfaisante, et spécialiste du graphique, me vienne en aide ?

moko138 · Le 10/11/2016, à 01:31

À première vue, un seul "fail" :
[ 1.475431] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
il concerne le pilote libre d'une carte nVidia.
Rien sur X.org ni sur des problèmes de connexion au serveur X.

Mais ce retour démarre à 0,88 seconde au lieu de 0,00... Et il n'y a que 400 lignes, pile.

Donc va (en live) dans les préférences de ton terminal et change le nombre de lignes pour 2500, en procédant comme indiqué au message #9 de Retour utilisable de commande. Puis redonne

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/home/sat/dmesg.txt

Là, le fichier devrait être complet et plus instructif.
- -

Pour aider les spécialistes du graphique, donne-leur aussi (en live)

lspci -nnk | grep -Ei -A 4 "VGA|3D|Display"

Satire · Le 10/11/2016, à 01:44

Décidemment, j'en appris beaucoup grace à toi, Moko138... j'ai découvert par hazard que je devais cliquer gauche pour accéder au préférences du terminal...

Donc, je suis allé dans scrolling (oui, c'est en anglais, je pense donc que cela correspond à défilement...) et le nombre affichait 512.

1ère commande :

ubuntu@ubuntu:~$ cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/home/sat/dmesg.txt
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-45-generic (buildd@lgw01-34) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 (Ubuntu 4.4.0-45.66-generic 4.4.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=8b29a24b-4e15-439c-9cd0-2f476d84643b ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe71fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfe72000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. XPS M1530                       /0D501F, BIOS A12 11/19/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 0DFF00000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 512MB, type WB
[    0.000000] reg 4, base: 3583MB, range: 1MB, type UC
[    0.000000] total RAM covered: 4095M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3583MB, range: 1MB, type UC
[    0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 3, base: 4GB, range: 512MB, type WB
[    0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdfe72 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337ca000-0x35bdcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBC90 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000DFE73A00 000064 (v01 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000DFE7389C 0000F4 (v04 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000DFE74000 004BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 0x00000000DFE82800 000040
[    0.000000] ACPI: FACS 0x00000000DFE82800 000040
[    0.000000] ACPI: HPET 0x00000000DFE73B00 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.000000] ACPI: APIC 0x00000000DFE73C00 000068 (v01 DELL   M08      27D80B13 ASL  00000047)
[    0.000000] ACPI: MCFG 0x00000000DFE73BC0 00003E (v16 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: SLIC 0x00000000DFE73C9C 000176 (v01 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: OSFR 0x00000000DFE73200 00002C (v01 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000DFE737C0 000028 (v01 DELL   M08      27D80B13 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000DFE7217E 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dfe71fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[    0.000000] On node 0 totalpages: 1048080
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14266 pages used for memmap
[    0.000000]   DMA32 zone: 913010 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe72000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s98008 r8192 d28968 u1048576
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031681
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=8b29a24b-4e15-439c-9cd0-2f476d84643b ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4004700K/4192320K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 187620K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2492.938 MHz processor
[    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4985.87 BogoMIPS (lpj=9971752)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004026] ACPI: Core revision 20150930
[    0.010553] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010584] Security Framework initialized
[    0.010587] Yama: becoming mindful.
[    0.010611] AppArmor: AppArmor initialized
[    0.010953] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013318] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014388] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014394] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014746] Initializing cgroup subsys io
[    0.014752] Initializing cgroup subsys memory
[    0.014765] Initializing cgroup subsys devices
[    0.014770] Initializing cgroup subsys freezer
[    0.014773] Initializing cgroup subsys net_cls
[    0.014777] Initializing cgroup subsys perf_event
[    0.014781] Initializing cgroup subsys net_prio
[    0.014787] Initializing cgroup subsys hugetlb
[    0.014790] Initializing cgroup subsys pids
[    0.014817] CPU: Physical Processor ID: 0
[    0.014818] CPU: Processor Core ID: 0
[    0.014821] mce: CPU supports 6 MCE banks
[    0.014831] CPU0: Thermal monitoring enabled (TM2)
[    0.014835] process: using mwait in idle threads
[    0.014841] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.014842] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.015218] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.020007] ftrace: allocating 32007 entries in 126 pages
[    0.032114] smpboot: Max logical packages: 1
[    0.032117] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.032585] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.076045] x86: Booted up 1 node, 2 CPUs
[    0.076050] smpboot: Total of 2 processors activated (9971.75 BogoMIPS)
[    0.079110] devtmpfs: initialized
[    0.082472] evm: security.selinux
[    0.082474] evm: security.SMACK64
[    0.082475] evm: security.SMACK64EXEC
[    0.082476] evm: security.SMACK64TRANSMUTE
[    0.082478] evm: security.SMACK64MMAP
[    0.082479] evm: security.ima
[    0.082480] evm: security.capability
[    0.082622] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082662] pinctrl core: initialized pinctrl subsystem
[    0.082662] RTC time: 22:23:59, date: 11/09/16
[    0.082662] NET: Registered protocol family 16
[    0.092004] cpuidle: using governor ladder
[    0.100003] cpuidle: using governor menu
[    0.100007] PCCT header not found.
[    0.100043] Simple Boot Flag at 0x79 set to 0x80
[    0.100072] ACPI: bus type PCI registered
[    0.100074] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.100153] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.100156] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.100159] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.100270] PCI: Using configuration type 1 for base access
[    0.100276] dmi type 0xB1 record - unknown flag
[    0.108092] ACPI: Added _OSI(Module Device)
[    0.108094] ACPI: Added _OSI(Processor Device)
[    0.108095] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108097] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113102] ACPI: Dynamic OEM Table Load:
[    0.113109] ACPI: SSDT 0xFFFF8800DB86C800 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.113399] ACPI: Dynamic OEM Table Load:
[    0.113405] ACPI: SSDT 0xFFFF88011B017800 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.113851] ACPI: Dynamic OEM Table Load:
[    0.113856] ACPI: SSDT 0xFFFF88011ABB1F00 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.114096] ACPI: Dynamic OEM Table Load:
[    0.114101] ACPI: SSDT 0xFFFF8800DB828300 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.114416] ACPI: Interpreter enabled
[    0.114422] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.114426] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.114439] ACPI: (supports S0 S3 S4 S5)
[    0.114440] ACPI: Using IOAPIC for interrupt routing
[    0.114463] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.152157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.152164] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.152168] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.152177] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.160191] PCI host bridge to bus 0000:00
[    0.160195] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.160197] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.160199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.160202] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.160204] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.160206] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.160208] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.160210] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.160212] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.160214] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.160216] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.160218] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.160220] pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff window]
[    0.160222] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.160232] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.160338] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.160381] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.160505] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.160565] pci 0000:00:1a.0: reg 0x20: [io  0x6f20-0x6f3f]
[    0.162237] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.162287] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.162347] pci 0000:00:1a.1: reg 0x20: [io  0x6f00-0x6f1f]
[    0.164013] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.164076] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.164109] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[    0.164201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.166089] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.166150] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.166191] pci 0000:00:1b.0: reg 0x10: [mem 0xf6ffc000-0xf6ffffff 64bit]
[    0.166287] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.166339] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.166393] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.166503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.166556] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.166610] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.166721] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.166774] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.166831] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.166941] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.166996] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.167048] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.167107] pci 0000:00:1d.0: reg 0x20: [io  0x6f80-0x6f9f]
[    0.169215] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.169267] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.169326] pci 0000:00:1d.1: reg 0x20: [io  0x6f60-0x6f7f]
[    0.170999] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.171048] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.171108] pci 0000:00:1d.2: reg 0x20: [io  0x6f40-0x6f5f]
[    0.172949] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.173010] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.173043] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[    0.173135] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.174965] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.175018] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.175130] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.175183] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.175308] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.175315] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.175319] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.175323] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
[    0.175327] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.175429] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.175449] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.175461] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.175473] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.175485] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.175497] pci 0000:00:1f.1: reg 0x20: [io  0x6fa0-0x6faf]
[    0.175524] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.175525] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.175527] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.175529] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.175619] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.175655] pci 0000:00:1f.2: reg 0x10: [io  0x6eb0-0x6eb7]
[    0.175667] pci 0000:00:1f.2: reg 0x14: [io  0x6eb8-0x6ebb]
[    0.175679] pci 0000:00:1f.2: reg 0x18: [io  0x6ec0-0x6ec7]
[    0.175691] pci 0000:00:1f.2: reg 0x1c: [io  0x6ec8-0x6ecb]
[    0.175703] pci 0000:00:1f.2: reg 0x20: [io  0x6ee0-0x6eff]
[    0.175715] pci 0000:00:1f.2: reg 0x24: [mem 0xf6ffb800-0xf6ffbfff]
[    0.175762] pci 0000:00:1f.2: PME# supported from D3hot
[    0.175850] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.175870] pci 0000:00:1f.3: reg 0x10: [mem 0xf6ffb700-0xf6ffb7ff]
[    0.175912] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.176162] pci 0000:01:00.0: [10de:0407] type 00 class 0x030000
[    0.176203] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    0.176223] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.176244] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit]
[    0.176257] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
[    0.176271] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.176414] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.176418] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.176421] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf6efffff]
[    0.176425] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.176517] pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
[    0.176582] pci 0000:09:00.0: reg 0x10: [mem 0xf1ffc000-0xf1ffffff 64bit]
[    0.176600] pci 0000:09:00.0: reg 0x18: [io  0xde00-0xdeff]
[    0.176735] pci 0000:09:00.0: supports D1 D2
[    0.176737] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184023] pci 0000:00:1c.0: PCI bridge to [bus 09]
[    0.184028] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.184033] pci 0000:00:1c.0:   bridge window [mem 0xf1f00000-0xf1ffffff]
[    0.184169] pci 0000:0b:00.0: [8086:4229] type 00 class 0x028000
[    0.184256] pci 0000:0b:00.0: reg 0x10: [mem 0xf1efe000-0xf1efffff 64bit]
[    0.184462] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[    0.192044] pci 0000:00:1c.1: PCI bridge to [bus 0b]
[    0.192052] pci 0000:00:1c.1:   bridge window [mem 0xf1e00000-0xf1efffff]
[    0.192147] acpiphp: Slot [1] registered
[    0.192154] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
[    0.192159] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.192164] pci 0000:00:1c.4:   bridge window [mem 0xf1c00000-0xf1dfffff]
[    0.192172] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.192257] pci 0000:03:09.0: [1180:0832] type 00 class 0x0c0010
[    0.192281] pci 0000:03:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.192283] pci 0000:03:09.0: MMC cards are now supported by standard SDHCI controller
[    0.192299] pci 0000:03:09.0: reg 0x10: [mem 0xf1bff800-0xf1bfffff]
[    0.192390] pci 0000:03:09.0: supports D1 D2
[    0.192391] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192462] pci 0000:03:09.1: [1180:0822] type 00 class 0x080501
[    0.192493] pci 0000:03:09.1: reg 0x10: [mem 0xf1bff400-0xf1bff4ff]
[    0.192584] pci 0000:03:09.1: supports D1 D2
[    0.192585] pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192655] pci 0000:03:09.2: [1180:0592] type 00 class 0x088000
[    0.192686] pci 0000:03:09.2: reg 0x10: [mem 0xf1bff600-0xf1bff6ff]
[    0.192777] pci 0000:03:09.2: supports D1 D2
[    0.192779] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.192845] pci 0000:03:09.3: [1180:0852] type 00 class 0x088000
[    0.192875] pci 0000:03:09.3: reg 0x10: [mem 0xf1bff700-0xf1bff7ff]
[    0.192965] pci 0000:03:09.3: supports D1 D2
[    0.192967] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193068] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.193076] pci 0000:00:1e.0:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.193084] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.193086] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.193088] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.193090] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.193093] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.193095] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.193097] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.193099] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.193102] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.193104] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.193106] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.193108] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.193110] pci 0000:00:1e.0:   bridge window [mem 0x120000000-0x317ffffff window] (subtractive decode)
[    0.193485] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[    0.193562] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.193637] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[    0.193704] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[    0.193779] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.193856] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.193931] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.193999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.194295] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.194402] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.194402] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.194402] vgaarb: loaded
[    0.194402] vgaarb: bridge control possible 0000:01:00.0
[    0.194402] SCSI subsystem initialized
[    0.194402] libata version 3.00 loaded.
[    0.194402] ACPI: bus type USB registered
[    0.194402] usbcore: registered new interface driver usbfs
[    0.194402] usbcore: registered new interface driver hub
[    0.194402] usbcore: registered new device driver usb
[    0.194402] PCI: Using ACPI for IRQ routing
[    0.197437] PCI: pci_cache_line_size set to 64 bytes
[    0.197565] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.197567] e820: reserve RAM buffer [mem 0xdfe72000-0xdfffffff]
[    0.197696] NetLabel: Initializing
[    0.197698] NetLabel:  domain hash size = 128
[    0.197699] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.197714] NetLabel:  unlabeled traffic allowed by default
[    0.197737] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.197737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.197737] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.198068] amd_nb: Cannot enumerate AMD northbridges
[    0.198068] clocksource: Switched to clocksource hpet
[    0.204968] AppArmor: AppArmor Filesystem Enabled
[    0.205061] pnp: PnP ACPI init
[    0.205183] system 00:00: [mem 0xff800000-0xff8fffff] has been reserved
[    0.205186] system 00:00: [mem 0xffc00000-0xffcfffff] has been reserved
[    0.205191] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205250] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.205288] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.205327] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.205377] system 00:04: [io  0x0c80-0x0cff] could not be reserved
[    0.205380] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205458] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.205462] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.205607] system 00:06: [io  0x0900-0x097f] has been reserved
[    0.205610] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.205613] system 00:06: [io  0x1000-0x1005] has been reserved
[    0.205615] system 00:06: [io  0x1008-0x100f] has been reserved
[    0.205618] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205669] system 00:07: [io  0xf400-0xf4fe] has been reserved
[    0.205672] system 00:07: [io  0x1006-0x1007] has been reserved
[    0.205674] system 00:07: [io  0x100a-0x1059] could not be reserved
[    0.205676] system 00:07: [io  0x1080-0x10bf] has been reserved
[    0.205678] system 00:07: [io  0x10c0-0x10df] has been reserved
[    0.205681] system 00:07: [io  0x1010-0x102f] could not be reserved
[    0.205683] system 00:07: [io  0x0809] has been reserved
[    0.205687] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.215252] system 00:08: [mem 0x00000000-0x0009efff] could not be reserved
[    0.215255] system 00:08: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.215258] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.215260] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.215263] system 00:08: [mem 0x00100000-0xdfe71fff] could not be reserved
[    0.215265] system 00:08: [mem 0xdfe72000-0xdfefffff] has been reserved
[    0.215267] system 00:08: [mem 0xdff00000-0xdfffffff] has been reserved
[    0.215270] system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
[    0.215272] system 00:08: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.215274] system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.215277] system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.215279] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.215281] system 00:08: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.215283] system 00:08: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.215286] system 00:08: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.215288] system 00:08: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.215290] system 00:08: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.215293] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.215296] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.215346] pnp: PnP ACPI: found 9 devices
[    0.222753] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.222779] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.222791] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.222794] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.222817] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.222821] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.222824] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.222826] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.222828] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.222831] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.222833] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.222843] pci 0000:00:1c.0: BAR 15: assigned [mem 0x120000000-0x1201fffff 64bit pref]
[    0.222849] pci 0000:00:1c.1: BAR 15: assigned [mem 0x120200000-0x1203fffff 64bit pref]
[    0.222852] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.222855] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.222858] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.222861] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.222864] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf6efffff]
[    0.222868] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.222872] pci 0000:00:1c.0: PCI bridge to [bus 09]
[    0.222875] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.222882] pci 0000:00:1c.0:   bridge window [mem 0xf1f00000-0xf1ffffff]
[    0.222887] pci 0000:00:1c.0:   bridge window [mem 0x120000000-0x1201fffff 64bit pref]
[    0.222894] pci 0000:00:1c.1: PCI bridge to [bus 0b]
[    0.222898] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.222904] pci 0000:00:1c.1:   bridge window [mem 0xf1e00000-0xf1efffff]
[    0.222909] pci 0000:00:1c.1:   bridge window [mem 0x120200000-0x1203fffff 64bit pref]
[    0.222917] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
[    0.222920] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.222926] pci 0000:00:1c.4:   bridge window [mem 0xf1c00000-0xf1dfffff]
[    0.222931] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.222940] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.222946] pci 0000:00:1e.0:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.222957] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.222960] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.222962] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.222964] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.222966] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.222968] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.222970] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.222972] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.222974] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.222976] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.222979] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.222981] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.222983] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff window]
[    0.222985] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.222987] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
[    0.222989] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.222991] pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
[    0.222993] pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff]
[    0.222995] pci_bus 0000:09: resource 2 [mem 0x120000000-0x1201fffff 64bit pref]
[    0.222998] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.223000] pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff]
[    0.223002] pci_bus 0000:0b: resource 2 [mem 0x120200000-0x1203fffff 64bit pref]
[    0.223004] pci_bus 0000:0c: resource 0 [io  0xc000-0xcfff]
[    0.223006] pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff]
[    0.223008] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.223010] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
[    0.223012] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.223014] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.223016] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.223018] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.223020] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.223023] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.223025] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.223027] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.223029] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.223031] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[    0.223033] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[    0.223035] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[    0.223037] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff window]
[    0.223072] NET: Registered protocol family 2
[    0.223288] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.223431] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.223667] TCP: Hash tables configured (established 32768 bind 32768)
[    0.223735] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.223770] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.223842] NET: Registered protocol family 1
[    0.225651] pci 0000:01:00.0: Video device with shadowed ROM
[    0.225692] PCI: CLS 64 bytes, default 64
[    0.225747] Trying to unpack rootfs image as initramfs...
[    0.876540] Freeing initrd memory: 36940K (ffff8800337ca000 - ffff880035bdd000)
[    0.876580] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.876585] software IO TLB [mem 0xdbe72000-0xdfe72000] (64MB) mapped at [ffff8800dbe72000-ffff8800dfe71fff]
[    0.876807] Scanning for low memory corruption every 60 seconds
[    0.877238] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.877280] audit: initializing netlink subsys (disabled)
[    0.877314] audit: type=2000 audit(1478730239.876:1): initialized
[    0.877691] Initialise system trusted keyring
[    0.877849] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.879998] zbud: loaded
[    0.880231] VFS: Disk quotas dquot_6.6.0
[    0.880277] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.880637] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.880953] fuse init (API version 7.23)
[    0.881132] Key type big_key registered
[    0.881152] Allocating IMA MOK and blacklist keyrings.
[    0.881687] Key type asymmetric registered
[    0.881691] Asymmetric key parser 'x509' registered
[    0.881737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.881774] io scheduler noop registered
[    0.881776] io scheduler deadline registered (default)
[    0.881818] io scheduler cfq registered
[    0.882869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.882877] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.882915] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    0.882917] vesafb: scrolling: redraw
[    0.882919] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.882942] vesafb: framebuffer at 0xf3000000, mapped to 0xffffc90000800000, using 4032k, total 4032k
[    0.883072] Console: switching to colour frame buffer device 160x50
[    0.883100] fb0: VESA VGA frame buffer device
[    0.883118] intel_idle: does not run on family 6 model 23
[    0.883220] ACPI: AC Adapter [AC] (on-line)
[    0.883295] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.028358] ACPI: Lid Switch [LID]
[    1.028409] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.028412] ACPI: Power Button [PBTN]
[    1.028459] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.028461] ACPI: Sleep Button [SBTN]
[    1.028552] Monitor-Mwait will be used to enter C-1 state
[    1.028566] Monitor-Mwait will be used to enter C-2 state
[    1.028577] Monitor-Mwait will be used to enter C-3 state
[    1.028585] tsc: Marking TSC unstable due to TSC halts in idle
[    1.028600] ACPI: acpi_idle registered with cpuidle
[    1.029197] thermal LNXTHERM:00: registered as thermal_zone0
[    1.029199] ACPI: Thermal Zone [THM] (67 C)
[    1.029234] GHES: HEST is not enabled!
[    1.036095] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.043300] Linux agpgart interface v0.103
[    1.047065] ACPI: Battery Slot [BAT0] (battery present)
[    1.050482] brd: module loaded
[    1.052159] loop: module loaded
[    1.052316] ata_piix 0000:00:1f.1: version 2.13
[    1.053076] scsi host0: ata_piix
[    1.053218] scsi host1: ata_piix
[    1.053268] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.053270] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.053397] libphy: Fixed MDIO Bus: probed
[    1.053400] tun: Universal TUN/TAP device driver, 1.6
[    1.053401] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.053440] ata2: port disabled--ignoring
[    1.053478] PPP generic driver version 2.4.2
[    1.053555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.053561] ehci-pci: EHCI PCI platform driver
[    1.053730] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.053738] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.053753] ehci-pci 0000:00:1a.7: debug port 1
[    1.057672] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.057684] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.068041] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.068131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.068140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068142] usb usb1: Product: EHCI Host Controller
[    1.068144] usb usb1: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    1.068146] usb usb1: SerialNumber: 0000:00:1a.7
[    1.068312] hub 1-0:1.0: USB hub found
[    1.068320] hub 1-0:1.0: 4 ports detected
[    1.068639] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.068646] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.068660] ehci-pci 0000:00:1d.7: debug port 1
[    1.072565] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.072577] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.084230] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.084296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.084301] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.084310] usb usb2: Product: EHCI Host Controller
[    1.084312] usb usb2: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    1.084314] usb usb2: SerialNumber: 0000:00:1d.7
[    1.084468] hub 2-0:1.0: USB hub found
[    1.084475] hub 2-0:1.0: 6 ports detected
[    1.084715] ehci-platform: EHCI generic platform driver
[    1.084728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.084732] ohci-pci: OHCI PCI platform driver
[    1.084746] ohci-platform: OHCI generic platform driver
[    1.084755] uhci_hcd: USB Universal Host Controller Interface driver
[    1.084896] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.084904] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.084912] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.084934] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    1.084984] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.084986] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.084988] usb usb3: Product: UHCI Host Controller
[    1.084990] usb usb3: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.084992] usb usb3: SerialNumber: 0000:00:1a.0
[    1.085143] hub 3-0:1.0: USB hub found
[    1.085150] hub 3-0:1.0: 2 ports detected
[    1.085399] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.085406] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.085413] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.085439] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    1.085490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.085492] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085494] usb usb4: Product: UHCI Host Controller
[    1.085496] usb usb4: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.085498] usb usb4: SerialNumber: 0000:00:1a.1
[    1.085644] hub 4-0:1.0: USB hub found
[    1.085651] hub 4-0:1.0: 2 ports detected
[    1.085900] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.085906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.085916] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.085937] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    1.085985] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.085988] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085990] usb usb5: Product: UHCI Host Controller
[    1.085992] usb usb5: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.085993] usb usb5: SerialNumber: 0000:00:1d.0
[    1.086143] hub 5-0:1.0: USB hub found
[    1.086152] hub 5-0:1.0: 2 ports detected
[    1.086397] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.086403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.086411] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.086432] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    1.086484] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.086487] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086489] usb usb6: Product: UHCI Host Controller
[    1.086491] usb usb6: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.086493] usb usb6: SerialNumber: 0000:00:1d.1
[    1.086642] hub 6-0:1.0: USB hub found
[    1.086650] hub 6-0:1.0: 2 ports detected
[    1.086892] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.086899] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.086906] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.086927] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.086977] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.086979] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086981] usb usb7: Product: UHCI Host Controller
[    1.086983] usb usb7: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.086985] usb usb7: SerialNumber: 0000:00:1d.2
[    1.087136] hub 7-0:1.0: USB hub found
[    1.087144] hub 7-0:1.0: 2 ports detected
[    1.087320] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.098380] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.098385] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.098582] mousedev: PS/2 mouse device common for all mice
[    1.099063] rtc_cmos 00:03: RTC can wake from S4
[    1.099257] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.099290] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.099298] i2c /dev entries driver
[    1.099362] device-mapper: uevent: version 1.0.3
[    1.099458] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.099476] ledtrig-cpu: registered to indicate activity on CPUs
[    1.099949] NET: Registered protocol family 10
[    1.100201] NET: Registered protocol family 17
[    1.100215] Key type dns_resolver registered
[    1.100423] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[    1.100429] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[    1.100494] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.100729] registered taskstats version 1
[    1.100744] Loading compiled-in X.509 certificates
[    1.101817] Loaded X.509 cert 'Build time autogenerated kernel key: 5295ae568fdd4deae5e4e5c175542790e6aaeab9'
[    1.101837] zswap: loaded using pool lzo/zbud
[    1.104121] Key type trusted registered
[    1.107657] Key type encrypted registered
[    1.107662] AppArmor: AppArmor sha1 policy hashing enabled
[    1.107667] ima: No TPM chip found, activating TPM-bypass!
[    1.107691] evm: HMAC attrs: 0x1
[    1.108121]   Magic number: 8:863:400
[    1.108255] rtc_cmos 00:03: setting system clock to 2016-11-09 22:24:00 UTC (1478730240)
[    1.109098] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.109099] EDD information not available.
[    1.109164] PM: Hibernation image not present or could not be loaded.
[    1.126253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.221846] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.221848] Write protecting the kernel read-only data: 14336k
[    1.222887] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[    1.223346] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    1.233946] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234044] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234061] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234080] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234625] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234685] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234876] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.234950] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.235020] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.235089] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
[    1.289248] [drm] Initialized drm 1.1.0 20060810
[    1.290049] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.302310] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.319210] sky2: driver version 1.30
[    1.326431] sdhci: Secure Digital Host Controller Interface driver
[    1.326434] sdhci: Copyright(c) Pierre Ossman
[    1.328083] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
[    1.330171] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.330386] acpi device:30: registered as cooling_device2
[    1.330519] wmi: Mapper loaded
[    1.330746] sky2 0000:09:00.0 eth0: addr 00:23:ae:08:cd:17
[    1.330817] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input5
[    1.336305] ahci 0000:00:1f.2: version 3.0
[    1.336590] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.336593] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.350352] sdhci-pci 0000:03:09.1: No vmmc regulator found
[    1.350356] sdhci-pci 0000:03:09.1: No vqmmc regulator found
[    1.351053] scsi host2: ahci
[    1.354996] scsi host3: ahci
[    1.357087] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA
[    1.359532] scsi host4: ahci
[    1.359606] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 29
[    1.359608] ata4: DUMMY
[    1.359611] ata5: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 29
[    1.360405] checking generic (f3000000 3f0000) vs hw (e0000000 10000000)
[    1.360407] checking generic (f3000000 3f0000) vs hw (f2000000 2000000)
[    1.360409] fb: switching to nouveaufb from VESA VGA
[    1.360443] Console: switching to colour dummy device 80x25
[    1.360588] nouveau 0000:01:00.0: NVIDIA G84 (084700a2)
[    1.380022] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.385938] nouveau 0000:01:00.0: bios: version 60.84.5e.00.08
[    1.407889] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[    1.436286] firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.466558] [TTM] Zone  kernel: Available graphics memory: 2022562 kiB
[    1.466560] [TTM] Initializing pool allocator
[    1.466572] [TTM] Initializing DMA pool allocator
[    1.466590] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[    1.466592] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.466597] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    1.466599] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.466602] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[    1.466605] nouveau 0000:01:00.0: DRM: DCB outp 01: 02012300 00000028
[    1.466607] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021312 00020010
[    1.466609] nouveau 0000:01:00.0: DRM: DCB outp 03: 010333f1 00c0c080
[    1.466611] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040
[    1.466614] nouveau 0000:01:00.0: DRM: DCB conn 01: 1161
[    1.466616] nouveau 0000:01:00.0: DRM: DCB conn 02: 0200
[    1.466618] nouveau 0000:01:00.0: DRM: DCB conn 03: 0310
[    1.466620] nouveau 0000:01:00.0: DRM: DCB conn 04: 0311
[    1.466622] nouveau 0000:01:00.0: DRM: DCB conn 05: 0313
[    1.475431] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[    1.475434] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[    1.475464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.475466] [drm] Driver supports precise vblank timestamp query.
[    1.492647] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[    1.517132] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640
[    1.517135] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.517137] usb 1-1: Product: Laptop Integrated Webcam
[    1.517139] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1
[    1.584044] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    1.676074] ata5: SATA link down (SStatus 0 SControl 300)
[    1.676127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.706889] ata3.00: ATA-8: SanDisk SDSSDH060GG25, 365A13F0, max UDMA/133
[    1.706891] ata3.00: 117231408 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    1.762083] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
[    1.762086] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.762088] usb 7-2: Product: BCM2045B2
[    1.762090] usb 7-2: Manufacturer: Broadcom
[    1.765119] hub 7-2:1.0: USB hub found
[    1.766700] ata3.00: configured for UDMA/133
[    1.766821] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SDSSDH06 13F0 PQ: 0 ANSI: 5
[    1.767088] hub 7-2:1.0: 3 ports detected
[    1.767139] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    1.767214] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.767225] sd 2:0:0:0: [sda] Write Protect is off
[    1.767228] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.767254] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.767839]  sda: sda1 sda2 < sda5 >
[    1.768196] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.812051] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.876063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23ef2aa9b3f, max_idle_ns: 440795290968 ns
[    1.936563] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[    1.940138] firewire_core 0000:03:09.0: created device fw0: GUID 444fc00002129c90, S400
[    2.048050] usb 7-2.2: new full-speed USB device number 3 using uhci_hcd
[    2.181058] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502
[    2.181061] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.181071] usb 7-2.2: Manufacturer: Broadcom Corp
[    2.187965] hidraw: raw HID events driver (C) Jiri Kosina
[    2.193266] usbcore: registered new interface driver usbhid
[    2.193268] usbhid: USB HID core driver
[    2.194071] usb 3-2: New USB device found, idVendor=0483, idProduct=2016
[    2.194074] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.194076] usb 3-2: Product: Biometric Coprocessor
[    2.194078] usb 3-2: Manufacturer: STMicroelectronics
[    2.195690] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/0003:0A5C:4502.0001/input/input7
[    2.248144] hid-generic 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[    2.256045] usb 7-2.3: new full-speed USB device number 4 using uhci_hcd
[    2.393078] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503
[    2.393081] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.393084] usb 7-2.3: Manufacturer: Broadcom Corp
[    2.401646] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/0003:0A5C:4503.0002/input/input8
[    2.401775] hid-generic 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[    2.698552] nouveau 0000:01:00.0: DRM: allocated 1280x800 fb: 0x70000, bo ffff880034e9a800
[    2.698658] fbcon: nouveaufb (fb0) is primary device
[    2.698747] Console: switching to colour frame buffer device 160x50
[    2.698775] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.708082] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.792501] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
[    2.906558] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.906681] systemd[1]: Detected architecture x86-64.
[    2.906953] systemd[1]: Set hostname to <sat-XPS-M1530>.
[    3.029635] systemd[1]: Reached target Remote File Systems (Pre).
[    3.029728] systemd[1]: Listening on udev Control Socket.
[    3.029748] systemd[1]: Reached target User and Group Name Lookups.
[    3.029822] systemd[1]: Listening on Journal Audit Socket.
[    3.029861] systemd[1]: Listening on Syslog Socket.
[    3.029916] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.030025] systemd[1]: Created slice System Slice.
[    3.030075] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.030100] systemd[1]: Reached target Remote File Systems.
[    3.030117] systemd[1]: Reached target Encrypted Volumes.
[    3.030148] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.030281] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.030334] systemd[1]: Listening on Journal Socket.
[    3.040271] systemd[1]: Starting Journal Service...
[    3.040804] systemd[1]: Mounting Huge Pages File System...
[    3.041495] systemd[1]: Mounting POSIX Message Queue File System...
[    3.042427] systemd[1]: Started Read required files in advance.
[    3.043209] systemd[1]: Starting Uncomplicated firewall...
[    3.047521] systemd[1]: Starting Load Kernel Modules...
[    3.048183] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.049686] systemd[1]: Mounting Debug File System...
[    3.051137] systemd[1]: Started Braille Device Support.
[    3.051943] systemd[1]: Starting Set console keymap...
[    3.052080] systemd[1]: Created slice User and Session Slice.
[    3.052126] systemd[1]: Reached target Slices.
[    3.052214] systemd[1]: Listening on udev Kernel Socket.
[    3.052307] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.056750] systemd[1]: Started Uncomplicated firewall.
[    3.057136] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.062847] systemd[1]: Mounted Debug File System.
[    3.062899] systemd[1]: Mounted POSIX Message Queue File System.
[    3.062926] systemd[1]: Mounted Huge Pages File System.
[    3.069548] lp: driver loaded but no devices found
[    3.085154] ppdev: user-space parallel port driver
[    3.089776] systemd[1]: Started Load Kernel Modules.
[    3.132188] systemd[1]: Starting Apply Kernel Variables...
[    3.132797] systemd[1]: Mounting FUSE Control File System...
[    3.133461] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.135078] systemd[1]: Mounted FUSE Control File System.
[    3.142135] systemd[1]: Started Apply Kernel Variables.
[    3.149004] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.162618] systemd[1]: Started Set console keymap.
[    3.170194] systemd[1]: Started Journal Service.
[    3.221830] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    3.309307] systemd-journald[207]: Received request to flush runtime journal from PID 1
[    3.497933] audit: type=1400 audit(1478730242.884:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=461 comm="apparmor_parser"
[    3.497944] audit: type=1400 audit(1478730242.884:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium" pid=461 comm="apparmor_parser"
[    3.523082] audit: type=1400 audit(1478730242.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=460 comm="apparmor_parser"
[    3.523092] audit: type=1400 audit(1478730242.908:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=460 comm="apparmor_parser"
[    3.533814] audit: type=1400 audit(1478730242.920:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=471 comm="apparmor_parser"
[    3.533825] audit: type=1400 audit(1478730242.920:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium" pid=471 comm="apparmor_parser"
[    3.542969] random: nonblocking pool is initialized
[    3.543301] audit: type=1400 audit(1478730242.928:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[    3.543310] audit: type=1400 audit(1478730242.928:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[    3.543316] audit: type=1400 audit(1478730242.928:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=472 comm="apparmor_parser"
[    3.794105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.891795] r592: driver successfully loaded
[    3.927432] r852: driver loaded successfully
[    3.977582] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[    3.977586] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[    3.977652] iwl4965 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.977820] iwl4965 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[    4.020540] iwl4965 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5
[    4.020564] iwl4965 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[    4.026525] iwl4965 0000:0b:00.0: loaded firmware version 228.61.2.24
[    4.058562] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[    4.069160] Adding 4190204k swap on /dev/sda5.  Priority:-1 extents:1 across:4190204k SSFS
[    4.087307] kvm: disabled by bios
[    4.123054] snd_hda_codec_idt hdaudioC0D2: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    4.123056] snd_hda_codec_idt hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.123058] snd_hda_codec_idt hdaudioC0D2:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[    4.123059] snd_hda_codec_idt hdaudioC0D2:    mono: mono_out=0x0
[    4.123061] snd_hda_codec_idt hdaudioC0D2:    dig-out=0x21/0x0
[    4.123062] snd_hda_codec_idt hdaudioC0D2:    inputs:
[    4.123064] snd_hda_codec_idt hdaudioC0D2:      Internal Mic=0x13
[    4.123065] snd_hda_codec_idt hdaudioC0D2:      Mic=0xe
[    4.144973] media: Linux media interface: v0.10
[    4.166094] Linux video capture interface: v2.00
[    4.197379] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.259734] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[    4.261429] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9
[    4.261502] usbcore: registered new interface driver uvcvideo
[    4.261504] USB Video Class driver (1.1.1)
[    4.318925] cgroup: new mount options do not match the existing superblock, will be ignored
[    4.327285] input: Dell WMI hotkeys as /devices/virtual/input/input10
[    4.365988] gpio_ich: GPIO from 462 to 511 on gpio_ich
[    4.515859] cfg80211: World regulatory domain updated:
[    4.515863] cfg80211:  DFS Master region: unset
[    4.515865] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.515868] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515870] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515872] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515874] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.515876] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.515879] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.515881] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.515883] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.537673] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.537846] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.114890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.361058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.368820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.371483] sky2 0000:09:00.0 eth0: enabling interface
[    5.371624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.489506] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.715924] wlan0: authenticate with 74:44:01:f3:54:fc
[    7.734198] wlan0: send auth to 74:44:01:f3:54:fc (try 1/3)
[    7.736131] wlan0: authenticated
[    7.736264] wlan0: waiting for beacon from 74:44:01:f3:54:fc
[    7.812052] wlan0: associate with 74:44:01:f3:54:fc (try 1/3)
[    7.823771] wlan0: RX AssocResp from 74:44:01:f3:54:fc (capab=0x411 status=0 aid=2)
[    7.851348] wlan0: associated
[    7.851402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ubuntu@ubuntu:~$

2nde commande :

ubuntu@ubuntu:~$ lspci -nnk | grep -Ei -A 4 "VGA|3D|Display"
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84M [GeForce 8600M GT] [10de:0407] (rev a1)
	Subsystem: Dell Device [1028:022e]
	Kernel driver in use: nouveau
03:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
	Subsystem: Dell Device [1028:022e]
ubuntu@ubuntu:~$

Bougron · Le 10/11/2016, à 01:51

Bonsoir
S'il y a un problème graphique, la solution première est de se passer du graphique en utilisant l'option nomodeset. voir au paragraphe 6.2

Dernière modification par Bougron (Le 10/11/2016, à 01:52)

Satire · Le 10/11/2016, à 02:08

Bonsoir Bougron,
Je te remercie beaucoup de me venir en aide.

Je dois dire que je ne suis pas très fort en informatique, et ne comprend pas toujours le vocabulaire utilisé, ni certaines manipulations à entreprendre....

Je suis allé au paragraphe 6.2, mais je n'ai pas trouvé mentionné nomodeset ?

Je n'ai pas non plus trop compris comment lancer boot-repair, ni l'ordre des différentes étapes à engager pour parvenir à me passer du graphique en utilisant nomodeset ?

moko138 · Le 10/11/2016, à 02:12

lspci : nous avons une seule carte graphique.

J'ai fait un ajout au #34.

Ah ! Merci Bougron d'intervenir !

Skubu · Le 10/11/2016, à 02:18

Satire a écrit :

http://pix.tdct.org/upload/original/1478729039.jpg

Il y a un souci avec le fichier /usr/share/X11/xorg.conf.d/50-synaptics.conf !

Coeur Noir avait pourtant corrigé ici:
https://forum.ubuntu-fr.org/viewtopic.p … #p21622637

Je soupçonne l'option "discard"...

En live, montes la partition système à l'aide du gestionnaire de fichiers, puis dans une console:

sudo cp /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf.backup /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf

Donnes le résultat de la commande de prompt à prompt. Le prompt sur le live c'est: ubuntu@ubuntu~$
N'oublie pas de démonter la partition via le gestionnaire de fichiers avant de redémarrer sur le système installé.

moko138 · Le 10/11/2016, à 02:22

En §6.2, je crois que ce que Bougron veut dire, c'est que là où il y a "acpi=off" sur la capture, toi tu choisiras "nomodeset".

En #34, j'ai mis ta capture "startx" mais beaucoup allégée.

Dernière modification par moko138 (Le 10/11/2016, à 02:51)

Bougron · Le 10/11/2016, à 12:53

Bonjour
Les explications sur les principales options sont décrites au paragraphe 6.1 du même document, Il y a même un renvoi qui permet de voir quasiment toutes les autres options .(hormis les récentes!)..

Il est possible que l'option nomodeset soit à ajouter en plus de acpi=off

Ce que tu dois faire, c'est télécharger la version 16.04.1 et l'essayer avant d'installer... Si tu n'as pas d'écran noir, ce n'est probablement pas l'option nomodeset qui va résoudre.

PS: Avoir deux OS opérationnels dans un ordinateur, minimise les risques d'être 4 jours sans pouvoir utiliser la bécane.....

Dernière modification par Bougron (Le 10/11/2016, à 12:57)

Satire · Le 10/11/2016, à 21:55

Salut Skubu, en réponse au message #43 :

ubuntu@ubuntu:~$ sudo cp /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf.backup /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf
ubuntu@ubuntu:~$

Skubu · Le 10/11/2016, à 22:09

Salut,

La commande semble bien passée. Tu peux afficher le contenu avec

cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf

Cela doit ressembler à ça :

# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
      MatchDevicePath "/dev/input/event*"
EndSection

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/mouse*"
        Option "Ignore" "on"
EndSection

# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection

Si c'est bon, démontes la partition et redémarre sur le système installé.

Satire · Le 10/11/2016, à 22:19

Effectivement, il me semble que cela ressemble bien à ce que tu as affiché :

ubuntu@ubuntu:~$ cat /media/ubuntu/8b29a24b-4e15-439c-9cd0-2f476d84643b/usr/share/X11/xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
      MatchDevicePath "/dev/input/event*"
EndSection

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/mouse*"
        Option "Ignore" "on"
EndSection

# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
ubuntu@ubuntu:~$

Je démonte donc la partition et redémarre à l'instant.

Satire · Le 10/11/2016, à 22:29

HOURRAH ! Ça a marché !

Mon ordinateur a démarré sur Ubuntu 16.04. Mais j'ai eu une sueur froide lorsque j'ai vu apparaître avant cela, le même message de blocage : /dev/sda1: clean, ??? files, ??? blocks

Et quelques secondes plus tard, mon système a ouvert comme il avait l'habitude de le faire auparavant... c'est à dire normalement sur mon système d'exploitation Ubuntu 16.04

Je viens aussi de m'empresser d'accepter des mises à jour, plus de 100M...

Est-ce que tu penses que le problème est réglé ?

D'ailleurs, la mise à jour me demande de redémarrer l'ordinateur... je suis un peu anxieux...

Dernière modification par Satire (Le 10/11/2016, à 22:32)

Skubu · Le 10/11/2016, à 23:40

/dev/sda1: clean, ??? files, ??? blocks

Cette ligne signifie que le système contrôle l'intégrité de tes systèmes de fichiers. C'est un processus qui s'effectue tous les x démarrages... Peux pas dire précisément tous les combien...

Xorg bloquait car il ne parvenait pas à comprendre le fichier. Pas de Xorg, pas d'affichage graphique. Il ne devrait pas y avoir de souci avec la mise à jour. Tu dois pouvoir redémarrer sans problème.

Selon moi, ton système est revenu dans le même état qu'il était au moment où tu as créé le précédent fil: https://forum.ubuntu-fr.org/viewtopic.php?id=1997139
Mais comme je l'ai dit plus haut, je n'aime pas les migrations, c'est générateur de problème... Peut-être qu'il serait bon de partir sur un système "propre".
Euh... Si j'ai bien compris, il y a bien eu migration de ubuntu 14.04 vers 16.04 ? Merci de confirmer ça.

Ensuite c'est toi qui voit, on peut continuer à chercher via l'autre fil ou bien tu réinstalles proprement en prenant soin de bien sauvegarder tes données ainsi que tes fichiers de configurations logicielles dans ton /home/satire/ (il faut afficher les répertoires cachés pour voir les fichiers configurations logicielles) et on voit ce que ça donne concernant le touchpad.

Si tu as des logiciels paramétrés dans le répertoire /etc/, il faut aussi penser à les sauvegarder.

C'est étrange pour le touchpad qu'il ne fonctionne bien que par intermittence en live, d'ailleurs pendant tous ces démarrages en live, as-tu eu le temps de voir si le touchpad fonctionnait correctement ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 09/11/2016, à 09:47

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#27 Le 09/11/2016, à 11:03

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#28 Le 09/11/2016, à 19:55

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#29 Le 09/11/2016, à 23:22

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#30 Le 09/11/2016, à 23:27

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#31 Le 10/11/2016, à 00:16

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#32 Le 10/11/2016, à 00:21

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#33 Le 10/11/2016, à 00:53

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#34 Le 10/11/2016, à 00:59

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#35 Le 10/11/2016, à 01:06

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#36 Le 10/11/2016, à 01:09

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#37 Le 10/11/2016, à 01:19

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#38 Le 10/11/2016, à 01:31

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#39 Le 10/11/2016, à 01:44

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#40 Le 10/11/2016, à 01:51

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#41 Le 10/11/2016, à 02:08

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#42 Le 10/11/2016, à 02:12

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#43 Le 10/11/2016, à 02:18

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#44 Le 10/11/2016, à 02:22

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#45 Le 10/11/2016, à 12:53

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#46 Le 10/11/2016, à 21:55

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#47 Le 10/11/2016, à 22:09

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#48 Le 10/11/2016, à 22:19

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#49 Le 10/11/2016, à 22:29

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

#50 Le 10/11/2016, à 23:40

Re : [RÉSOLU] Démarrage Ubuntu bloqué : /dev/sda1: clean, ? files, ? blocks

Pied de page des forums