#51 Le 05/11/2016, à 02:55
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Et voici le résultat de la dernière étape de #38 :
sat@sat-XPS-M1530:~$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Broadcom Corp id=11 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ Laptop Integrated Webcam id=9 [slave keyboard (3)]
↳ Broadcom Corp id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
↳ Dell WMI hotkeys id=14 [slave keyboard (3)]
sat@sat-XPS-M1530:~$ synclient
Couldn't find synaptics properties. No synaptics driver loaded?
sat@sat-XPS-M1530:~$ Je ne suis pas sûr, mais il semble que c'est la même réponse négative sur synaptics ?
J'espère que je n'ai pas fait de mauvaises manipulations ?
Hors ligne
#52 Le 05/11/2016, à 03:24
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Groumpf ( = expression de ma circonspection ).
Toujours pas de Alps dans la liste…
Avant de copier d'un système à l'autre, c'eut été bien de juste voir ce que contenaient ces fichiers ( sur le disque dur ). Mais à mon avis rien de grave, ce sont les fichiers configurés par défaut, tu les as simplement remplacés par …des fichiers identiques. Et puis si tu as bien tout suivi tu as fait des backup des originaux.
Me viennent deux suppositions :
- ton touchpad est défectueux ( ? )
- son driver ne se charge pas parce qu'il serait « blacklisté » ( ? )
Pour afficher les modules blacklistés :
cat /etc/modprobe.d/blacklist.confDernière modification par Coeur Noir (Le 05/11/2016, à 03:26)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#53 Le 05/11/2016, à 13:21
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Ravi d'apprendre un nouveau mot 
(mais de quelle région et qu'est-ce que cela veut dire ?)
Oui, effectivement, j'ai suivi scrupuleusement chacune des commandes de #38, les une à la suite de l'autre, comme j'ai essayé de le montrer dans mes différents posts.
Voici le retour de la commande sur les modules blacklistés :
sat@sat-XPS-M1530:~$ cat /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
sat@sat-XPS-M1530:~$ La touchpad ne semble pas y être mentionnée ?
Dernière modification par Satire (Le 05/11/2016, à 13:23)
Hors ligne
#54 Le 05/11/2016, à 15:30
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
…
je cale.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#55 Le 05/11/2016, à 15:41
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Aïe, aïe, aïe... pas très rassurant tout ça...
Y aurait-il une autre âme bienveillante qui aurait une idée ?
Hors ligne
#56 Le 05/11/2016, à 16:14
- Skubu
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Oui, les fichiers sont identiques comme le montre sdiff
sdiff cat1 cat2
cat /usr/share/X11/xorg.conf.d/50-synaptics.conf.backup | cat /usr/share/X11/xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad drive # Example xorg.conf.d snippet that assigns the touchpad drive
# to all touchpads. See xorg.conf.d(5) for more information o # to all touchpads. See xorg.conf.d(5) for more information o
# InputClass. # InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwr # DO NOT EDIT THIS FILE, your distribution will likely overwr
# it when updating. Copy (and rename) this file into # it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first. # /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of # Additional options may be added in the form of
# Option "OptionName" "value" # Option "OptionName" "value"
# #
Section "InputClass" Section "InputClass"
Identifier "touchpad catchall" Identifier "touchpad catchall"
Driver "synaptics" Driver "synaptics"
MatchIsTouchpad "on" MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, # This option is recommend on all Linux systems using evdev,
# enabled by default. See the following link for details: # enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configurati # http://who-t.blogspot.com/2010/11/how-to-ignore-configurati
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "touchpad ignore duplicates" Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on" MatchIsTouchpad "on"
MatchOS "Linux" MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*" MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on" Option "Ignore" "on"
EndSection EndSection
# This option enables the bottom right corner to be a right b # This option enables the bottom right corner to be a right b
# and the right and middle top areas to be right / middle but # and the right and middle top areas to be right / middle but
# with a top button area. # with a top button area.
# This option is only interpreted by clickpads. # This option is only interpreted by clickpads.
Section "InputClass" Section "InputClass"
Identifier "Default clickpad buttons" Identifier "Default clickpad buttons"
MatchDriver "synaptics" MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58 Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58
EndSection EndSection
# This option disables software buttons on Apple touchpads. # This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads. # This option is only interpreted by clickpads.
Section "InputClass" Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpa Identifier "Disable clickpad buttons on Apple touchpa
MatchProduct "Apple|bcm5974" MatchProduct "Apple|bcm5974"
MatchDriver "synaptics" MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0" Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection EndSection
sat@sat-XPS-M1530:~$ cat /usr/share/X11/xorg.conf.d/51-synapt | ubuntu@ubuntu:~$ cat /usr/share/X11/xorg.conf.d/51-synaptics-
Section "InputClass" Section "InputClass"
Identifier "Dell Inspiron embedded buttons quirks" Identifier "Dell Inspiron embedded buttons quirks"
MatchTag "inspiron_1011|inspiron_1012" MatchTag "inspiron_1011|inspiron_1012"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "synaptics" Driver "synaptics"
Option "JumpyCursorThreshold" "90" Option "JumpyCursorThreshold" "90"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "Dell Inspiron quirks" Identifier "Dell Inspiron quirks"
MatchTag "inspiron_1120" MatchTag "inspiron_1120"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "synaptics" Driver "synaptics"
Option "JumpyCursorThreshold" "250" Option "JumpyCursorThreshold" "250"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "HP Mininote quirks" Identifier "HP Mininote quirks"
MatchTag "mininote_1000" MatchTag "mininote_1000"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "synaptics" Driver "synaptics"
Option "JumpyCursorThreshold" "20" Option "JumpyCursorThreshold" "20"
EndSection EndSection
sat@sat-XPS-M1530:~$ cat /usr/share/X11/xorg.conf.d/10-evdev. | ubuntu@ubuntu:~$ cat /usr/share/X11/xorg.conf.d/10-evdev.conf
# #
# Catch-all evdev loader for udev-based systems # Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds ac # We don't simply match on any device since that also adds ac
# and other devices that we don't really want to use. The lis # and other devices that we don't really want to use. The lis
# matches everything but joysticks. # matches everything but joysticks.
Section "InputClass" Section "InputClass"
Identifier "evdev pointer catchall" Identifier "evdev pointer catchall"
MatchIsPointer "on" MatchIsPointer "on"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "evdev" Driver "evdev"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "evdev keyboard catchall" Identifier "evdev keyboard catchall"
MatchIsKeyboard "on" MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "evdev" Driver "evdev"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "evdev touchpad catchall" Identifier "evdev touchpad catchall"
MatchIsTouchpad "on" MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "evdev" Driver "evdev"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "evdev tablet catchall" Identifier "evdev tablet catchall"
MatchIsTablet "on" MatchIsTablet "on"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "evdev" Driver "evdev"
EndSection EndSection
Section "InputClass" Section "InputClass"
Identifier "evdev touchscreen catchall" Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on" MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*" MatchDevicePath "/dev/input/event*"
Driver "evdev" Driver "evdev"
EndSection EndSectionEssayons peut-être de démarrer avec un autre noyau ?
Consultons aussi les logs de Xorg ?
cat /var/log/Xorg.0.logDebian / Archlinux | Gnome / KDE
Hors ligne
#57 Le 05/11/2016, à 16:23
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Des discussions concernant Alps :
https://forum.ubuntu-fr.org/viewtopic.php?id=1844171 → renvoie vers un wiki archlinux
https://forum.ubuntu-fr.org/viewtopic.php?id=433247 → ancien, à propos d'un portable sony, et de grub.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#58 Le 05/11/2016, à 16:40
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Salut Skubu,
Bien que mes connaissances en la matière soit quasi nulles... 
je reste partant pour tenter de démarrer avec un autre noyau.
Voici le retour de logs de Xorg :
sat@sat-XPS-M1530:~$ cat /var/log/Xorg.0.log
[ 4.952]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 4.952] X Protocol Version 11, Revision 0
[ 4.952] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu
[ 4.952] Current Operating System: Linux sat-XPS-M1530 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64
[ 4.952] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=8b29a24b-4e15-439c-9cd0-2f476d84643b ro quiet splash vt.handoff=7
[ 4.952] Build Date: 14 September 2016 03:33:24PM
[ 4.952] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support)
[ 4.952] Current version of pixman: 0.33.6
[ 4.952] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.952] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.952] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 5 11:46:31 2016
[ 4.954] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.965] (==) No Layout section. Using the first Screen section.
[ 4.965] (==) No screen section available. Using defaults.
[ 4.965] (**) |-->Screen "Default Screen Section" (0)
[ 4.965] (**) | |-->Monitor "<default monitor>"
[ 4.966] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.966] (==) Automatically adding devices
[ 4.966] (==) Automatically enabling devices
[ 4.966] (==) Automatically adding GPU devices
[ 4.966] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.972] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.972] Entry deleted from font path.
[ 4.972] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.972] Entry deleted from font path.
[ 4.972] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.972] Entry deleted from font path.
[ 4.973] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.973] Entry deleted from font path.
[ 4.973] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.973] Entry deleted from font path.
[ 4.973] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.973] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.973] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.974] (II) Loader magic: 0x55740c865dc0
[ 4.974] (II) Module ABI versions:
[ 4.974] X.Org ANSI C Emulation: 0.4
[ 4.974] X.Org Video Driver: 20.0
[ 4.974] X.Org XInput driver : 22.1
[ 4.974] X.Org Server Extension : 9.0
[ 4.975] (++) using VT number 7
[ 4.975] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.976] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.978] (--) PCI:*(0:1:0:0) 10de:0407:1028:022e rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 4.978] (II) LoadModule: "glx"
[ 4.983] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.015] (II) Module glx: vendor="X.Org Foundation"
[ 5.015] compiled for 1.18.4, module version = 1.0.0
[ 5.015] ABI class: X.Org Server Extension, version 9.0
[ 5.015] (==) AIGLX enabled
[ 5.015] (==) Matched nvidia as autoconfigured driver 0
[ 5.015] (==) Matched nouveau as autoconfigured driver 1
[ 5.015] (==) Matched nvidia as autoconfigured driver 2
[ 5.015] (==) Matched nouveau as autoconfigured driver 3
[ 5.015] (==) Matched modesetting as autoconfigured driver 4
[ 5.015] (==) Matched fbdev as autoconfigured driver 5
[ 5.015] (==) Matched vesa as autoconfigured driver 6
[ 5.015] (==) Assigned the driver to the xf86ConfigLayout
[ 5.015] (II) LoadModule: "nvidia"
[ 5.021] (WW) Warning, couldn't open module nvidia
[ 5.021] (II) UnloadModule: "nvidia"
[ 5.021] (II) Unloading nvidia
[ 5.021] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 5.021] (II) LoadModule: "nouveau"
[ 5.022] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 5.029] (II) Module nouveau: vendor="X.Org Foundation"
[ 5.029] compiled for 1.18.1, module version = 1.0.12
[ 5.029] Module class: X.Org Video Driver
[ 5.029] ABI class: X.Org Video Driver, version 20.0
[ 5.029] (II) LoadModule: "modesetting"
[ 5.029] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.032] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.032] compiled for 1.18.4, module version = 1.18.4
[ 5.032] Module class: X.Org Video Driver
[ 5.032] ABI class: X.Org Video Driver, version 20.0
[ 5.032] (II) LoadModule: "fbdev"
[ 5.033] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.036] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.036] compiled for 1.18.1, module version = 0.4.4
[ 5.036] Module class: X.Org Video Driver
[ 5.036] ABI class: X.Org Video Driver, version 20.0
[ 5.036] (II) LoadModule: "vesa"
[ 5.037] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.039] (II) Module vesa: vendor="X.Org Foundation"
[ 5.039] compiled for 1.18.1, module version = 2.3.4
[ 5.039] Module class: X.Org Video Driver
[ 5.039] ABI class: X.Org Video Driver, version 20.0
[ 5.039] (==) Matched nvidia as autoconfigured driver 0
[ 5.039] (==) Matched nouveau as autoconfigured driver 1
[ 5.039] (==) Matched nvidia as autoconfigured driver 2
[ 5.039] (==) Matched nouveau as autoconfigured driver 3
[ 5.039] (==) Matched modesetting as autoconfigured driver 4
[ 5.039] (==) Matched fbdev as autoconfigured driver 5
[ 5.039] (==) Matched vesa as autoconfigured driver 6
[ 5.039] (==) Assigned the driver to the xf86ConfigLayout
[ 5.039] (II) LoadModule: "nvidia"
[ 5.040] (WW) Warning, couldn't open module nvidia
[ 5.040] (II) UnloadModule: "nvidia"
[ 5.040] (II) Unloading nvidia
[ 5.040] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 5.040] (II) LoadModule: "nouveau"
[ 5.040] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 5.040] (II) Module nouveau: vendor="X.Org Foundation"
[ 5.040] compiled for 1.18.1, module version = 1.0.12
[ 5.040] Module class: X.Org Video Driver
[ 5.040] ABI class: X.Org Video Driver, version 20.0
[ 5.040] (II) UnloadModule: "nouveau"
[ 5.040] (II) Unloading nouveau
[ 5.040] (II) Failed to load module "nouveau" (already loaded, 0)
[ 5.040] (II) LoadModule: "modesetting"
[ 5.040] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.040] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.040] compiled for 1.18.4, module version = 1.18.4
[ 5.040] Module class: X.Org Video Driver
[ 5.040] ABI class: X.Org Video Driver, version 20.0
[ 5.040] (II) UnloadModule: "modesetting"
[ 5.040] (II) Unloading modesetting
[ 5.040] (II) Failed to load module "modesetting" (already loaded, 0)
[ 5.040] (II) LoadModule: "fbdev"
[ 5.040] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.040] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.040] compiled for 1.18.1, module version = 0.4.4
[ 5.040] Module class: X.Org Video Driver
[ 5.040] ABI class: X.Org Video Driver, version 20.0
[ 5.040] (II) UnloadModule: "fbdev"
[ 5.040] (II) Unloading fbdev
[ 5.040] (II) Failed to load module "fbdev" (already loaded, 0)
[ 5.040] (II) LoadModule: "vesa"
[ 5.040] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.040] (II) Module vesa: vendor="X.Org Foundation"
[ 5.040] compiled for 1.18.1, module version = 2.3.4
[ 5.040] Module class: X.Org Video Driver
[ 5.040] ABI class: X.Org Video Driver, version 20.0
[ 5.040] (II) UnloadModule: "vesa"
[ 5.040] (II) Unloading vesa
[ 5.040] (II) Failed to load module "vesa" (already loaded, 0)
[ 5.040] (II) NOUVEAU driver Date: Tue Dec 8 15:52:25 2015 +1000
[ 5.040] (II) NOUVEAU driver for NVIDIA chipset families :
[ 5.040] RIVA TNT (NV04)
[ 5.040] RIVA TNT2 (NV05)
[ 5.040] GeForce 256 (NV10)
[ 5.040] GeForce 2 (NV11, NV15)
[ 5.040] GeForce 4MX (NV17, NV18)
[ 5.040] GeForce 3 (NV20)
[ 5.040] GeForce 4Ti (NV25, NV28)
[ 5.040] GeForce FX (NV3x)
[ 5.040] GeForce 6 (NV4x)
[ 5.040] GeForce 7 (G7x)
[ 5.040] GeForce 8 (G8x)
[ 5.040] GeForce GTX 200 (NVA0)
[ 5.040] GeForce GTX 400 (NVC0)
[ 5.040] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.040] (II) FBDEV: driver for framebuffer: fbdev
[ 5.040] (II) VESA: driver for VESA chipsets: vesa
[ 5.041] (II) [drm] nouveau interface version: 1.3.1
[ 5.041] (WW) Falling back to old probe method for modesetting
[ 5.041] (WW) Falling back to old probe method for fbdev
[ 5.041] (II) Loading sub module "fbdevhw"
[ 5.041] (II) LoadModule: "fbdevhw"
[ 5.041] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.043] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.043] compiled for 1.18.4, module version = 0.0.2
[ 5.043] ABI class: X.Org Video Driver, version 20.0
[ 5.043] (WW) Falling back to old probe method for vesa
[ 5.043] (II) Loading sub module "dri2"
[ 5.043] (II) LoadModule: "dri2"
[ 5.043] (II) Module "dri2" already built-in
[ 5.043] (--) NOUVEAU(0): Chipset: "NVIDIA NV84"
[ 5.043] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.043] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 5.043] (==) NOUVEAU(0): RGB weight 888
[ 5.043] (==) NOUVEAU(0): Default visual is TrueColor
[ 5.043] (==) NOUVEAU(0): Using HW cursor
[ 5.043] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 5.043] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 5.043] (==) NOUVEAU(0): Page flipping enabled
[ 5.043] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 5.043] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 5.043] (II) NOUVEAU(0): Initializing outputs ...
[ 5.253] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 5.268] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 5.275] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 5.275] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 5.289] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 5.289] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 5.502] (II) NOUVEAU(0): EDID for output LVDS-1
[ 5.502] (II) NOUVEAU(0): Manufacturer: SEC Model: 3358 Serial#: 0
[ 5.502] (II) NOUVEAU(0): Year: 2008 Week: 0
[ 5.502] (II) NOUVEAU(0): EDID Version: 1.3
[ 5.502] (II) NOUVEAU(0): Digital Display Input
[ 5.502] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 5.502] (II) NOUVEAU(0): Gamma: 2.20
[ 5.502] (II) NOUVEAU(0): No DPMS capabilities specified
[ 5.502] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5.502] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 5.502] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 5.502] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 5.502] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 5.502] (II) NOUVEAU(0): Supported detailed timing:
[ 5.502] (II) NOUVEAU(0): clock: 71.3 MHz Image Size: 331 x 207 mm
[ 5.502] (II) NOUVEAU(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1424 h_border: 0
[ 5.502] (II) NOUVEAU(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 834 v_border: 0
[ 5.502] (II) NOUVEAU(0): Unknown vendor-specific block f
[ 5.502] (II) NOUVEAU(0): X172G
[ 5.502] (II) NOUVEAU(0): &6@Gj
[ 5.502] (II) NOUVEAU(0): EDID (in hex):
[ 5.502] (II) NOUVEAU(0): 00ffffffffffff004ca3583300000000
[ 5.502] (II) NOUVEAU(0): 00120103802115780a87f594574f8c27
[ 5.502] (II) NOUVEAU(0): 27505400000001010101010101010101
[ 5.502] (II) NOUVEAU(0): 010101010101d61b0090502022301030
[ 5.502] (II) NOUVEAU(0): 13004bcf100000190000000f00000000
[ 5.502] (II) NOUVEAU(0): 00000000002387026400000000fe0058
[ 5.502] (II) NOUVEAU(0): 313732470031353458330a20000000fe
[ 5.502] (II) NOUVEAU(0): 00263640476a8fc6ff01010a20200091
[ 5.502] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 5.502] (II) NOUVEAU(0): Modeline "1280x800"x60.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 5.502] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 5.502] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 5.502] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 5.502] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 5.502] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 5.502] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 5.513] (II) NOUVEAU(0): EDID for output VGA-1
[ 5.514] (II) NOUVEAU(0): EDID for output HDMI-1
[ 5.514] (II) NOUVEAU(0): Output LVDS-1 connected
[ 5.514] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 5.514] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 5.514] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 5.514] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1280x800 +0+0
[ 5.514] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.514] (--) NOUVEAU(0): Virtual size is 1280x800 (pitch 0)
[ 5.514] (**) NOUVEAU(0): Driver mode "1280x800": 71.3 MHz (scaled from 0.0 MHz), 50.0 kHz, 60.0 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "1280x800"x60.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 5.514] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 5.514] (**) NOUVEAU(0): Mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 5.514] (**) NOUVEAU(0): Mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 5.514] (**) NOUVEAU(0): Mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 5.514] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 5.514] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 5.514] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 5.514] (==) NOUVEAU(0): DPI set to (96, 96)
[ 5.514] (II) Loading sub module "fb"
[ 5.514] (II) LoadModule: "fb"
[ 5.514] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.519] (II) Module fb: vendor="X.Org Foundation"
[ 5.519] compiled for 1.18.4, module version = 1.0.0
[ 5.519] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.519] (II) Loading sub module "shadowfb"
[ 5.519] (II) LoadModule: "shadowfb"
[ 5.520] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.520] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.520] compiled for 1.18.4, module version = 1.0.0
[ 5.520] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.520] (II) UnloadModule: "modesetting"
[ 5.520] (II) Unloading modesetting
[ 5.520] (II) UnloadModule: "fbdev"
[ 5.520] (II) Unloading fbdev
[ 5.520] (II) UnloadSubModule: "fbdevhw"
[ 5.520] (II) Unloading fbdevhw
[ 5.520] (II) UnloadModule: "vesa"
[ 5.520] (II) Unloading vesa
[ 5.520] (--) Depth 24 pixmap format is 32 bpp
[ 5.554] (II) NOUVEAU(0): Channel setup complete.
[ 5.562] (II) NOUVEAU(0): Hardware support for Present enabled
[ 5.562] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.562] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.562] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.562] (II) Loading sub module "exa"
[ 5.562] (II) LoadModule: "exa"
[ 5.562] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.564] (II) Module exa: vendor="X.Org Foundation"
[ 5.564] compiled for 1.18.4, module version = 2.6.0
[ 5.564] ABI class: X.Org Video Driver, version 20.0
[ 5.564] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.564] (II) EXA(0): Driver registered support for the following operations:
[ 5.564] (II) Solid
[ 5.564] (II) Copy
[ 5.564] (II) Composite (RENDER acceleration)
[ 5.564] (II) UploadToScreen
[ 5.564] (II) DownloadFromScreen
[ 5.564] (==) NOUVEAU(0): Backing store enabled
[ 5.564] (==) NOUVEAU(0): Silken mouse enabled
[ 5.565] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.565] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.565] (==) NOUVEAU(0): DPMS enabled
[ 5.565] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.565] (--) RandR disabled
[ 5.582] (II) SELinux: Disabled on system
[ 5.816] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.816] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.816] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.816] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 5.816] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.816] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.816] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 5.816] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 5.816] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 5.816] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.817] (II) AIGLX: Loaded and initialized nouveau
[ 5.817] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.818] (II) NOUVEAU(0): NVEnterVT is called.
[ 5.885] (II) NOUVEAU(0): Setting screen physical size to 338 x 211
[ 5.885] resize called 1280 800
[ 5.936] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 5.936] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.936] (II) LoadModule: "evdev"
[ 5.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.939] (II) Module evdev: vendor="X.Org Foundation"
[ 5.939] compiled for 1.18.1, module version = 2.10.1
[ 5.939] Module class: X.Org XInput Driver
[ 5.939] ABI class: X.Org XInput driver, version 22.1
[ 5.939] (II) Using input driver 'evdev' for 'Video Bus'
[ 5.939] (**) Video Bus: always reports core events
[ 5.939] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 5.939] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5.939] (--) evdev: Video Bus: Found keys
[ 5.939] (II) evdev: Video Bus: Configuring as keyboard
[ 5.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input6/event4"
[ 5.939] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 5.939] (**) Option "xkb_rules" "evdev"
[ 5.939] (**) Option "xkb_model" "pc105"
[ 5.939] (**) Option "xkb_layout" "fr"
[ 5.961] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.961] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.961] (II) Using input driver 'evdev' for 'Power Button'
[ 5.961] (**) Power Button: always reports core events
[ 5.961] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.961] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.961] (--) evdev: Power Button: Found keys
[ 5.961] (II) evdev: Power Button: Configuring as keyboard
[ 5.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 5.961] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.961] (**) Option "xkb_rules" "evdev"
[ 5.961] (**) Option "xkb_model" "pc105"
[ 5.961] (**) Option "xkb_layout" "fr"
[ 5.962] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 5.962] (II) No input driver specified, ignoring this device.
[ 5.962] (II) This device may have been added with another device file.
[ 5.962] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 5.962] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5.962] (II) Using input driver 'evdev' for 'Sleep Button'
[ 5.962] (**) Sleep Button: always reports core events
[ 5.962] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 5.962] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 5.962] (--) evdev: Sleep Button: Found keys
[ 5.962] (II) evdev: Sleep Button: Configuring as keyboard
[ 5.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 5.962] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 5.962] (**) Option "xkb_rules" "evdev"
[ 5.962] (**) Option "xkb_model" "pc105"
[ 5.962] (**) Option "xkb_layout" "fr"
[ 5.963] (II) config/udev: Adding input device Laptop Integrated Webcam (/dev/input/event8)
[ 5.963] (**) Laptop Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 5.963] (II) Using input driver 'evdev' for 'Laptop Integrated Webcam'
[ 5.963] (**) Laptop Integrated Webcam: always reports core events
[ 5.963] (**) evdev: Laptop Integrated Webcam: Device: "/dev/input/event8"
[ 5.963] (--) evdev: Laptop Integrated Webcam: Vendor 0x5a9 Product 0x2640
[ 5.963] (--) evdev: Laptop Integrated Webcam: Found keys
[ 5.963] (II) evdev: Laptop Integrated Webcam: Configuring as keyboard
[ 5.963] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9/event8"
[ 5.963] (II) XINPUT: Adding extended input device "Laptop Integrated Webcam" (type: KEYBOARD, id 9)
[ 5.963] (**) Option "xkb_rules" "evdev"
[ 5.963] (**) Option "xkb_model" "pc105"
[ 5.964] (**) Option "xkb_layout" "fr"
[ 5.964] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event10)
[ 5.964] (II) No input driver specified, ignoring this device.
[ 5.964] (II) This device may have been added with another device file.
[ 5.964] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event11)
[ 5.965] (II) No input driver specified, ignoring this device.
[ 5.965] (II) This device may have been added with another device file.
[ 5.965] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event6)
[ 5.965] (**) Broadcom Corp: Applying InputClass "evdev keyboard catchall"
[ 5.965] (II) Using input driver 'evdev' for 'Broadcom Corp'
[ 5.965] (**) Broadcom Corp: always reports core events
[ 5.965] (**) evdev: Broadcom Corp: Device: "/dev/input/event6"
[ 5.965] (--) evdev: Broadcom Corp: Vendor 0xa5c Product 0x4502
[ 5.965] (--) evdev: Broadcom Corp: Found keys
[ 5.965] (II) evdev: Broadcom Corp: Configuring as keyboard
[ 5.965] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/0003:0A5C:4502.0001/input/input7/event6"
[ 5.965] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD, id 10)
[ 5.965] (**) Option "xkb_rules" "evdev"
[ 5.965] (**) Option "xkb_model" "pc105"
[ 5.965] (**) Option "xkb_layout" "fr"
[ 5.966] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event7)
[ 5.966] (**) Broadcom Corp: Applying InputClass "evdev pointer catchall"
[ 5.966] (II) Using input driver 'evdev' for 'Broadcom Corp'
[ 5.966] (**) Broadcom Corp: always reports core events
[ 5.966] (**) evdev: Broadcom Corp: Device: "/dev/input/event7"
[ 6.024] (--) evdev: Broadcom Corp: Vendor 0xa5c Product 0x4503
[ 6.024] (--) evdev: Broadcom Corp: Found 3 mouse buttons
[ 6.024] (--) evdev: Broadcom Corp: Found relative axes
[ 6.024] (--) evdev: Broadcom Corp: Found x and y relative axes
[ 6.024] (II) evdev: Broadcom Corp: Configuring as mouse
[ 6.024] (**) evdev: Broadcom Corp: YAxisMapping: buttons 4 and 5
[ 6.024] (**) evdev: Broadcom Corp: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/0003:0A5C:4503.0002/input/input8/event7"
[ 6.024] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE, id 11)
[ 6.024] (II) evdev: Broadcom Corp: initialized for relative axes.
[ 6.024] (**) Broadcom Corp: (accel) keeping acceleration scheme 1
[ 6.024] (**) Broadcom Corp: (accel) acceleration profile 0
[ 6.024] (**) Broadcom Corp: (accel) acceleration factor: 2.000
[ 6.024] (**) Broadcom Corp: (accel) acceleration threshold: 4
[ 6.025] (II) config/udev: Adding input device Broadcom Corp (/dev/input/mouse1)
[ 6.025] (II) No input driver specified, ignoring this device.
[ 6.025] (II) This device may have been added with another device file.
[ 6.025] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 6.025] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.025] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.025] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.025] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 6.025] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.025] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.025] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.025] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 6.025] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 6.025] (**) Option "xkb_rules" "evdev"
[ 6.025] (**) Option "xkb_model" "pc105"
[ 6.025] (**) Option "xkb_layout" "fr"
[ 6.026] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event5)
[ 6.026] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 6.026] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 6.026] (**) PS/2 Generic Mouse: always reports core events
[ 6.026] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event5"
[ 6.026] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 6.026] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 6.026] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 6.026] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 6.026] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 6.026] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 6.026] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.026] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 6.026] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[ 6.026] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 6.026] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 6.026] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 6.026] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 6.026] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 6.026] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 6.026] (II) No input driver specified, ignoring this device.
[ 6.026] (II) This device may have been added with another device file.
[ 6.029] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 6.029] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 6.029] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 6.029] (**) Dell WMI hotkeys: always reports core events
[ 6.029] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
[ 6.029] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 6.029] (--) evdev: Dell WMI hotkeys: Found keys
[ 6.029] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 6.029] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 6.029] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 6.029] (**) Option "xkb_rules" "evdev"
[ 6.029] (**) Option "xkb_model" "pc105"
[ 6.029] (**) Option "xkb_layout" "fr"
[ 11.671] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13144
[ 11.671] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 11.671] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 14.786] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13144
[ 14.786] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.786] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 15.673] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13144
[ 15.673] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.673] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 16.072] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13144
[ 16.072] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.072] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
[ 16.126] resize called 1280 800
[ 16.686] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13144
[ 16.686] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.686] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1424 800 801 804 834 -hsync -vsync (50.0 kHz eP)
sat@sat-XPS-M1530:~$ Hors ligne
#59 Le 05/11/2016, à 17:34
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Ligne 448
[ 6.026] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"ce i8042 m'intrigue car c'est de lui qu'il est question dans le (vieux) deuxième lien du post #57. Tenter la modification du fichier grub ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#60 Le 06/11/2016, à 03:26
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Je ne sais pas trop quelles conséquences cela pourrait avoir sur le grub, mais si cela peut faire avancer le Schmilblick, pourquoi pas ?
Hors ligne
#61 Le 06/11/2016, à 04:02
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Beh grub est super important, puisque c'est lui qui permet au système de se lancer… C'est l'écran d'accueil en mode texte qui te permet de choisir quel o.s. démarrer, s'il y en a plusieurs sur ton pc. Écran que tu n'as peut-être jamais vu s'il n'y a qu'un seul o.s. sur ton pc.
On travaille ici sur la version « installée » d'ubuntu, on n'est plus en live-session. Donc il faut se garder quelques portes de sortie :
- sauvegarder ton actuel grub.
sudo cp /etc/default/grub /etc/default/grub.backup- savoir installer un outil de réparation de grub, boot-repair dans une live-session, si vraiment on cafouillait grave :
sudo add-apt-repository -y ppa:yannubuntu/boot-repair && sudo apt update && sudo apt install -y boot-repairCes précautions prises, on peut sereinement ouvrir le fichier grub dans un éditeur de texte en mode root :
gksudo gedit /etc/default/grubInstaller gksu au préalable s'il ne l'est pas déjà.
sudo apt install gksuDans gedit, modifier le fichier grub comme suit :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nopnp"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"C'est à dire à la 11ème ligne, ajout de i8042.nopnp
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nopnp"Enregistrer le fichier, quitter gedit.
Dans un terminal
sudo update-grubpour faire prendre en compte la modification.
Redémarrer le pc.
Prier - méditer - jurer - invoquer la magie → au choix !
Dernière modification par Coeur Noir (Le 06/11/2016, à 04:11)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#62 Le 06/11/2016, à 15:10
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Oui, tout à fait, j'avais connaissance de ce que représente le grub et de son importance... merci pour l'explication.
Voici donc les retours des commandes indiquées :
- sauvegarder ton actuel grub :
sat@sat-XPS-M1530:~$ sudo cp /etc/default/grub /etc/default/grub.backup
[sudo] Mot de passe de sat :
sat@sat-XPS-M1530:- savoir installer un outil de réparation de grub, boot-repair dans une live-session, si vraiment on cafouillait grave :
sat@sat-XPS-M1530:~$ sudo add-apt-repository -y ppa:yannubuntu/boot-repair && sudo apt update && sudo apt install -y boot-repair
gpg: le porte-clefs « /tmp/tmpbees6yon/secring.gpg » a été créé
gpg: le porte-clefs « /tmp/tmpbees6yon/pubring.gpg » a été créé
gpg: demande de la clef 60D8DA0B sur le serveur hkp keyserver.ubuntu.com
gpg: /tmp/tmpbees6yon/trustdb.gpg : base de confiance créée
gpg: clef 60D8DA0B : clef publique « Launchpad PPA for YannUbuntu » importée
gpg: Quantité totale traitée : 1
gpg: importées : 1 (RSA: 1)
OK
Atteint:1 http://security.ubuntu.com/ubuntu xenial-security InRelease
Atteint:2 http://fr.archive.ubuntu.com/ubuntu xenial InRelease
Atteint:3 http://archive.canonical.com/ubuntu xenial InRelease
Réception de:4 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease [17,5 kB]
Atteint:5 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease
Atteint:6 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease
Réception de:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 Packages [1 864 B]
Réception de:8 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main i386 Packages [1 864 B]
Réception de:9 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main Translation-en [2 092 B]
23,4 ko réceptionnés en 0s (31,5 ko/s)
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
14 packages can be upgraded. Run 'apt list --upgradable' to see them.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
The following additional packages will be installed:
boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
Paquets suggérés :
dmraid lvm2 cryptsetup mbr mdadm clean-ubiquity boot-info os-uninstaller
gawk-doc
Les NOUVEAUX paquets suivants seront installés :
boot-repair boot-sav boot-sav-extra gawk glade2script libsigsegv2 pastebinit
0 mis à jour, 7 nouvellement installés, 0 à enlever et 14 non mis à jour.
Il est nécessaire de prendre 1 033 ko dans les archives.
Après cette opération, 4 446 ko d'espace disque supplémentaires seront utilisés.
Réception de:1 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 libsigsegv2 amd64 2.10-4 [14,1 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 gawk amd64 1:4.1.3+dfsg-0.1 [398 kB]
Réception de:3 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 glade2script all 3.2.3~ppa1 [36,8 kB]
Réception de:4 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 pastebinit all 1.5-1 [14,6 kB]
Réception de:5 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav all 4ppa38 [416 kB]
Réception de:6 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-repair all 4ppa38 [11,5 kB]
Réception de:7 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial/main amd64 boot-sav-extra all 4ppa38 [142 kB]
1 033 ko réceptionnés en 1s (899 ko/s)
Sélection du paquet libsigsegv2:amd64 précédemment désélectionné.
(Lecture de la base de données... 261539 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libsigsegv2_2.10-4_amd64.deb ...
Dépaquetage de libsigsegv2:amd64 (2.10-4) ...
Paramétrage de libsigsegv2:amd64 (2.10-4) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu4) ...
Sélection du paquet gawk précédemment désélectionné.
(Lecture de la base de données... 261547 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../gawk_1%3a4.1.3+dfsg-0.1_amd64.deb ...
Dépaquetage de gawk (1:4.1.3+dfsg-0.1) ...
Sélection du paquet glade2script précédemment désélectionné.
Préparation du dépaquetage de .../glade2script_3.2.3~ppa1_all.deb ...
Dépaquetage de glade2script (3.2.3~ppa1) ...
Sélection du paquet boot-sav précédemment désélectionné.
Préparation du dépaquetage de .../boot-sav_4ppa38_all.deb ...
Dépaquetage de boot-sav (4ppa38) ...
Sélection du paquet boot-repair précédemment désélectionné.
Préparation du dépaquetage de .../boot-repair_4ppa38_all.deb ...
Dépaquetage de boot-repair (4ppa38) ...
Sélection du paquet boot-sav-extra précédemment désélectionné.
Préparation du dépaquetage de .../boot-sav-extra_4ppa38_all.deb ...
Dépaquetage de boot-sav-extra (4ppa38) ...
Sélection du paquet pastebinit précédemment désélectionné.
Préparation du dépaquetage de .../pastebinit_1.5-1_all.deb ...
Dépaquetage de pastebinit (1.5-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3~bzr0+16.04.20160824-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.22-1ubuntu5) ...
Traitement des actions différées (« triggers ») pour mime-support (3.59ubuntu1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.13.3-6ubuntu3.1) ...
Paramétrage de gawk (1:4.1.3+dfsg-0.1) ...
Paramétrage de glade2script (3.2.3~ppa1) ...
Paramétrage de boot-sav (4ppa38) ...
Paramétrage de boot-repair (4ppa38) ...
Paramétrage de boot-sav-extra (4ppa38) ...
Paramétrage de pastebinit (1.5-1) ...
sat@sat-XPS-M1530:~$Ces précautions prises, on peut sereinement ouvrir le fichier grub dans un éditeur de texte en mode root :
sat@sat-XPS-M1530:~$ gksudo gedit /etc/default/grubInstaller gksu au préalable s'il ne l'est pas déjà
sat@sat-XPS-M1530:~$ sudo apt install gksu
[sudo] Mot de passe de sat :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
gksu is already the newest version (2.0.2-9ubuntu1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 14 non mis à jour.
sat@sat-XPS-M1530:~$Dans gedit, modifier le fichier grub comme suit :
C'est à dire à la 11ème ligne, ajout de i8042.nopnp:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nopnp"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"Enregistrer le fichier, quitter gedit.
Dans un terminal :
sat@sat-XPS-M1530:~$ sudo update-grub
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Image Linux trouvée : /boot/vmlinuz-3.11.0-19-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.11.0-19-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
sat@sat-XPS-M1530:~$ Au choix donc, je prie et redémarre...
Hors ligne
#63 Le 06/11/2016, à 15:27
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
... toujours pas de réapparition du défilement... bien tristement...
Est-ce que tu penses que ce changement du grub pourrait avoir de conséquences néfastes sur mon système à l'avenir ?
Hors ligne
#64 Le 06/11/2016, à 19:33
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Re-bonjour,
Je viens de tomber sur deux pages en anglais (la seconde renvoie à la première) qui semblent fournir une solution au problème de défilement sur Ubuntu 16.04 :
http://askubuntu.com/questions/215976/t … tings?rq=1
http://askubuntu.com/questions/816982/m … untu-16-04
Comme vous le savez déjà, je ne suis pas trop un expert en ligne de commande, et lorsque l'explication est en anglais (comme c'est le cas ici) ma compréhension est d'autant plus restreinte...
Avant de tenter quoi que ce soit, j'aurais voulu savoir s'il y avait une personne qui pourrait me conseiller / confirmer si c'est une solution que je pourrais envisager et de quelle manière pourrais-je l'appliquer, car je ne suis pas sûr d'avoir tout compris et je ne souhaiterais pas faire de mauvaises manipulations...
Un grand merci par avance
Hors ligne
#65 Le 06/11/2016, à 19:37
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Dingue…
…rien n'est cassé on va prendre ça comme un point positif !
Aucune conséquence néfaste mais puisque la modification du grub ne change rien, autant le remettre à son état initial.
Tiens c'est curieux tu as encore 2 noyaux Linux anciens ( 3.13 qui doit correspondre à Ubuntu 14.04 et 3.11 à u13.10 )
Pour les enlever :
sudo apt purge linux-image-3.11.*
sudo apt purge linux-image-3.13.*je ne crois pas un seul instant que ça peut régler ton problème mais ça n'est pas très utile non plus de les garder.
Ensuite
sudo apt autoremove --purgeDébuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#66 Le 06/11/2016, à 19:44
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Effectivement, c'est vraiment un cauchemar ce truc...
Je viens de remettre le grub dans son état initial, voici (est-ce bien vrai ?) :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"Lorsque j'ai enregistré, puis fermé, j'ai eu ce message qui m'a un peu inquiété :
sat@sat-XPS-M1530:~$ gksudo gedit /etc/default/grub
** (gedit:5109): WARNING **: Set document metadata failed: La définition de l'attribut metadata::gedit-spell-enabled n'est pas prise en charge
** (gedit:5109): WARNING **: Set document metadata failed: La définition de l'attribut metadata::gedit-encoding n'est pas prise en charge
** (gedit:5109): WARNING **: Set document metadata failed: La définition de l'attribut metadata::gedit-position n'est pas prise en charge
sat@sat-XPS-M1530:~$ Est-ce normal ?
Hors ligne
#67 Le 06/11/2016, à 19:54
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Le message concernant gedit, pas grave, pas normal mais c'est un pépin fréquent de gedit…
Par contre à chaque modification du fichier grub, impératif de passer ensuite un
sudo update-grubDébuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#68 Le 06/11/2016, à 19:56
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
C'est peut-être une bonne trouvaille que tu as fait là.
On a déjà vu qu'il n'y avait pas libinput sur ton système, donc on va créer un nouveau fichier de configuration pour synaptics :
gksudo gedit /usr/share/X11/xorg.conf.d/50-synaptics.confAjoute
Option "VertEdgeScroll" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"directement en-dessous des options déjà listées [ edit ] dans le troisième paragraphe / Section "InputClass" / Identifier "Default clickpad buttons" / et avant EndSection
C'est la proposition http://askubuntu.com/questions/816982/m … untu-16-04
L'autre proposition propose un fichier de config' avec davantage d'options.
Pour sauvegarder, fais enregistrer sous /usr/share/X11/xorg.conf.d/ en donnant au fichier le nom 90-synaptics.conf
Le nombre au début du nom de fichier indique dans quel ordre les configurations seront lues et appliquées, ainsi ta config' perso' sera appliquée en dernier et la config' originale n'est pas détruite au cas où.
Si ça non plus ne résout pas le problème il n'y aura qu'à supprimer le fichier 90-synaptics.conf ( ou le modifier en ajoutant les options proposées sur l'autre lien ).
Dernière modification par Coeur Noir (Le 06/11/2016, à 20:57)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#69 Le 06/11/2016, à 19:57
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Ouf... rassuré... je viens donc de faire une mise à jour comme indiqué du fichier grub :
[sudo] Mot de passe de sat :
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Image Linux trouvée : /boot/vmlinuz-3.11.0-19-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.11.0-19-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
sat@sat-XPS-M1530:~$ Hors ligne
#70 Le 06/11/2016, à 20:01
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
( rien à voir mais tu as aussi 14 paquets non-mis à jour donc pense à mettre à jour ton système )
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#71 Le 06/11/2016, à 20:07
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Pour revenir, dans l'ordre, aux différentes commandes suggérées, cher Coeur Noir, voici leurs retours :
sat@sat-XPS-M1530:~$ sudo apt purge linux-image-3.11.*
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Note, selecting 'linux-image-3.11.0-12-generic' for glob 'linux-image-3.11.*'
Note, selecting 'linux-image-3.11.0-15-generic' for glob 'linux-image-3.11.*'
Note, selecting 'linux-image-3.11.0-19-generic' for glob 'linux-image-3.11.*'
Note, selecting 'linux-image-3.11.0-18-generic' for glob 'linux-image-3.11.*'
Note, selecting 'linux-image-3.11.0-17-generic' for glob 'linux-image-3.11.*'
Les paquets suivants seront ENLEVÉS :
linux-image-3.11.0-12-generic* linux-image-3.11.0-15-generic*
linux-image-3.11.0-17-generic* linux-image-3.11.0-18-generic*
linux-image-3.11.0-19-generic* linux-image-extra-3.11.0-19-generic*
0 mis à jour, 0 nouvellement installés, 6 à enlever et 14 non mis à jour.
Après cette opération, 184 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 261854 fichiers et répertoires déjà installés.)
Suppression de linux-image-3.11.0-12-generic (3.11.0-12.19) ...
Purge des fichiers de configuration de linux-image-3.11.0-12-generic (3.11.0-12.19) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-12-generic /boot/vmlinuz-3.11.0-12-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-12-generic /boot/vmlinuz-3.11.0-12-generic
Suppression de linux-image-3.11.0-15-generic (3.11.0-15.25) ...
Purge des fichiers de configuration de linux-image-3.11.0-15-generic (3.11.0-15.25) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-15-generic /boot/vmlinuz-3.11.0-15-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-15-generic /boot/vmlinuz-3.11.0-15-generic
Suppression de linux-image-3.11.0-17-generic (3.11.0-17.31) ...
Purge des fichiers de configuration de linux-image-3.11.0-17-generic (3.11.0-17.31) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-17-generic /boot/vmlinuz-3.11.0-17-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-17-generic /boot/vmlinuz-3.11.0-17-generic
Suppression de linux-image-3.11.0-18-generic (3.11.0-18.32) ...
Purge des fichiers de configuration de linux-image-3.11.0-18-generic (3.11.0-18.32) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-18-generic /boot/vmlinuz-3.11.0-18-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-18-generic /boot/vmlinuz-3.11.0-18-generic
Suppression de linux-image-extra-3.11.0-19-generic (3.11.0-19.33) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
update-initramfs: Deleting /boot/initrd.img-3.11.0-19-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Image Linux trouvée : /boot/vmlinuz-3.11.0-19-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
Purge des fichiers de configuration de linux-image-extra-3.11.0-19-generic (3.11.0-19.33) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
Suppression de linux-image-3.11.0-19-generic (3.11.0-19.33) ...
Examining /etc/kernel/prerm.d.
run-parts: executing /etc/kernel/prerm.d/dkms 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
update-initramfs: Deleting /boot/initrd.img-3.11.0-19-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
Purge des fichiers de configuration de linux-image-3.11.0-19-generic (3.11.0-19.33) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.11.0-19-generic /boot/vmlinuz-3.11.0-19-generic
sat@sat-XPS-M1530:~$ sudo apt purge linux-image-3.13.*
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Note, selecting 'linux-image-3.13.0-85-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-46-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-67-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-29-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-66-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-87-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-49-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-86-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-30-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-51-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-68-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-71-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-88-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-33-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-91-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-32-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-53-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-52-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-35-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-34-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-55-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-92-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-54-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-37-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-74-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-36-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-57-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-77-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-39-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-76-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-59-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-41-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-58-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-79-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-40-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-61-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-43-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-63-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-62-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-83-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-24-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-45-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-44-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-65-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-27-generic' for glob 'linux-image-3.13.*'
Note, selecting 'linux-image-3.13.0-48-generic' for glob 'linux-image-3.13.*'
Les paquets suivants seront ENLEVÉS :
linux-image-3.13.0-24-generic* linux-image-3.13.0-27-generic*
linux-image-3.13.0-29-generic* linux-image-3.13.0-30-generic*
linux-image-3.13.0-32-generic* linux-image-3.13.0-33-generic*
linux-image-3.13.0-34-generic* linux-image-3.13.0-35-generic*
linux-image-3.13.0-36-generic* linux-image-3.13.0-37-generic*
linux-image-3.13.0-39-generic* linux-image-3.13.0-40-generic*
linux-image-3.13.0-41-generic* linux-image-3.13.0-43-generic*
linux-image-3.13.0-44-generic* linux-image-3.13.0-45-generic*
linux-image-3.13.0-46-generic* linux-image-3.13.0-48-generic*
linux-image-3.13.0-49-generic* linux-image-3.13.0-51-generic*
linux-image-3.13.0-52-generic* linux-image-3.13.0-53-generic*
linux-image-3.13.0-54-generic* linux-image-3.13.0-55-generic*
linux-image-3.13.0-57-generic* linux-image-3.13.0-58-generic*
linux-image-3.13.0-59-generic* linux-image-3.13.0-61-generic*
linux-image-3.13.0-62-generic* linux-image-3.13.0-63-generic*
linux-image-3.13.0-65-generic* linux-image-3.13.0-66-generic*
linux-image-3.13.0-67-generic* linux-image-3.13.0-68-generic*
linux-image-3.13.0-71-generic* linux-image-3.13.0-74-generic*
linux-image-3.13.0-76-generic* linux-image-3.13.0-77-generic*
linux-image-3.13.0-79-generic* linux-image-3.13.0-83-generic*
linux-image-3.13.0-85-generic* linux-image-3.13.0-86-generic*
linux-image-3.13.0-87-generic* linux-image-3.13.0-88-generic*
linux-image-3.13.0-91-generic* linux-image-3.13.0-92-generic*
linux-image-extra-3.13.0-92-generic*
0 mis à jour, 0 nouvellement installés, 47 à enlever et 14 non mis à jour.
Après cette opération, 195 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 257069 fichiers et répertoires déjà installés.)
Suppression de linux-image-3.13.0-24-generic (3.13.0-24.47) ...
Purge des fichiers de configuration de linux-image-3.13.0-24-generic (3.13.0-24.47) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-24-generic /boot/vmlinuz-3.13.0-24-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-24-generic /boot/vmlinuz-3.13.0-24-generic
Suppression de linux-image-3.13.0-27-generic (3.13.0-27.50) ...
Purge des fichiers de configuration de linux-image-3.13.0-27-generic (3.13.0-27.50) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-27-generic /boot/vmlinuz-3.13.0-27-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-27-generic /boot/vmlinuz-3.13.0-27-generic
Suppression de linux-image-3.13.0-29-generic (3.13.0-29.53) ...
Purge des fichiers de configuration de linux-image-3.13.0-29-generic (3.13.0-29.53) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic
Suppression de linux-image-3.13.0-30-generic (3.13.0-30.55) ...
Purge des fichiers de configuration de linux-image-3.13.0-30-generic (3.13.0-30.55) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-30-generic /boot/vmlinuz-3.13.0-30-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-30-generic /boot/vmlinuz-3.13.0-30-generic
Suppression de linux-image-3.13.0-32-generic (3.13.0-32.57) ...
Purge des fichiers de configuration de linux-image-3.13.0-32-generic (3.13.0-32.57) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-32-generic /boot/vmlinuz-3.13.0-32-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-32-generic /boot/vmlinuz-3.13.0-32-generic
Suppression de linux-image-3.13.0-33-generic (3.13.0-33.58) ...
Purge des fichiers de configuration de linux-image-3.13.0-33-generic (3.13.0-33.58) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-33-generic /boot/vmlinuz-3.13.0-33-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-33-generic /boot/vmlinuz-3.13.0-33-generic
Suppression de linux-image-3.13.0-34-generic (3.13.0-34.60) ...
Purge des fichiers de configuration de linux-image-3.13.0-34-generic (3.13.0-34.60) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-34-generic /boot/vmlinuz-3.13.0-34-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-34-generic /boot/vmlinuz-3.13.0-34-generic
Suppression de linux-image-3.13.0-35-generic (3.13.0-35.62) ...
Purge des fichiers de configuration de linux-image-3.13.0-35-generic (3.13.0-35.62) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-35-generic /boot/vmlinuz-3.13.0-35-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-35-generic /boot/vmlinuz-3.13.0-35-generic
Suppression de linux-image-3.13.0-36-generic (3.13.0-36.63) ...
Purge des fichiers de configuration de linux-image-3.13.0-36-generic (3.13.0-36.63) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-36-generic /boot/vmlinuz-3.13.0-36-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-36-generic /boot/vmlinuz-3.13.0-36-generic
Suppression de linux-image-3.13.0-37-generic (3.13.0-37.64) ...
Purge des fichiers de configuration de linux-image-3.13.0-37-generic (3.13.0-37.64) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-37-generic /boot/vmlinuz-3.13.0-37-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-37-generic /boot/vmlinuz-3.13.0-37-generic
Suppression de linux-image-3.13.0-39-generic (3.13.0-39.66) ...
Purge des fichiers de configuration de linux-image-3.13.0-39-generic (3.13.0-39.66) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-39-generic /boot/vmlinuz-3.13.0-39-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-39-generic /boot/vmlinuz-3.13.0-39-generic
Suppression de linux-image-3.13.0-40-generic (3.13.0-40.69) ...
Purge des fichiers de configuration de linux-image-3.13.0-40-generic (3.13.0-40.69) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-40-generic /boot/vmlinuz-3.13.0-40-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-40-generic /boot/vmlinuz-3.13.0-40-generic
Suppression de linux-image-3.13.0-41-generic (3.13.0-41.70) ...
Purge des fichiers de configuration de linux-image-3.13.0-41-generic (3.13.0-41.70) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-41-generic /boot/vmlinuz-3.13.0-41-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-41-generic /boot/vmlinuz-3.13.0-41-generic
Suppression de linux-image-3.13.0-43-generic (3.13.0-43.72) ...
Purge des fichiers de configuration de linux-image-3.13.0-43-generic (3.13.0-43.72) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-43-generic /boot/vmlinuz-3.13.0-43-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-43-generic /boot/vmlinuz-3.13.0-43-generic
Suppression de linux-image-3.13.0-44-generic (3.13.0-44.73) ...
Purge des fichiers de configuration de linux-image-3.13.0-44-generic (3.13.0-44.73) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-44-generic /boot/vmlinuz-3.13.0-44-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-44-generic /boot/vmlinuz-3.13.0-44-generic
Suppression de linux-image-3.13.0-45-generic (3.13.0-45.74) ...
Purge des fichiers de configuration de linux-image-3.13.0-45-generic (3.13.0-45.74) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-45-generic /boot/vmlinuz-3.13.0-45-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-45-generic /boot/vmlinuz-3.13.0-45-generic
Suppression de linux-image-3.13.0-46-generic (3.13.0-46.79) ...
Purge des fichiers de configuration de linux-image-3.13.0-46-generic (3.13.0-46.79) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
Suppression de linux-image-3.13.0-48-generic (3.13.0-48.80) ...
Purge des fichiers de configuration de linux-image-3.13.0-48-generic (3.13.0-48.80) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-48-generic /boot/vmlinuz-3.13.0-48-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-48-generic /boot/vmlinuz-3.13.0-48-generic
Suppression de linux-image-3.13.0-49-generic (3.13.0-49.83) ...
Purge des fichiers de configuration de linux-image-3.13.0-49-generic (3.13.0-49.83) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-49-generic /boot/vmlinuz-3.13.0-49-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-49-generic /boot/vmlinuz-3.13.0-49-generic
Suppression de linux-image-3.13.0-51-generic (3.13.0-51.84) ...
Purge des fichiers de configuration de linux-image-3.13.0-51-generic (3.13.0-51.84) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-51-generic /boot/vmlinuz-3.13.0-51-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-51-generic /boot/vmlinuz-3.13.0-51-generic
Suppression de linux-image-3.13.0-52-generic (3.13.0-52.86) ...
Purge des fichiers de configuration de linux-image-3.13.0-52-generic (3.13.0-52.86) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-52-generic /boot/vmlinuz-3.13.0-52-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-52-generic /boot/vmlinuz-3.13.0-52-generic
Suppression de linux-image-3.13.0-53-generic (3.13.0-53.89) ...
Purge des fichiers de configuration de linux-image-3.13.0-53-generic (3.13.0-53.89) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-53-generic /boot/vmlinuz-3.13.0-53-generic
Suppression de linux-image-3.13.0-54-generic (3.13.0-54.91) ...
Purge des fichiers de configuration de linux-image-3.13.0-54-generic (3.13.0-54.91) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-54-generic /boot/vmlinuz-3.13.0-54-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-54-generic /boot/vmlinuz-3.13.0-54-generic
Suppression de linux-image-3.13.0-55-generic (3.13.0-55.94) ...
Purge des fichiers de configuration de linux-image-3.13.0-55-generic (3.13.0-55.94) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-55-generic /boot/vmlinuz-3.13.0-55-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-55-generic /boot/vmlinuz-3.13.0-55-generic
Suppression de linux-image-3.13.0-57-generic (3.13.0-57.95) ...
Purge des fichiers de configuration de linux-image-3.13.0-57-generic (3.13.0-57.95) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-57-generic /boot/vmlinuz-3.13.0-57-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-57-generic /boot/vmlinuz-3.13.0-57-generic
Suppression de linux-image-3.13.0-58-generic (3.13.0-58.97) ...
Purge des fichiers de configuration de linux-image-3.13.0-58-generic (3.13.0-58.97) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-58-generic /boot/vmlinuz-3.13.0-58-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-58-generic /boot/vmlinuz-3.13.0-58-generic
Suppression de linux-image-3.13.0-59-generic (3.13.0-59.98) ...
Purge des fichiers de configuration de linux-image-3.13.0-59-generic (3.13.0-59.98) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-59-generic /boot/vmlinuz-3.13.0-59-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-59-generic /boot/vmlinuz-3.13.0-59-generic
Suppression de linux-image-3.13.0-61-generic (3.13.0-61.100) ...
Purge des fichiers de configuration de linux-image-3.13.0-61-generic (3.13.0-61.100) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-61-generic /boot/vmlinuz-3.13.0-61-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-61-generic /boot/vmlinuz-3.13.0-61-generic
Suppression de linux-image-3.13.0-62-generic (3.13.0-62.102) ...
Purge des fichiers de configuration de linux-image-3.13.0-62-generic (3.13.0-62.102) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-62-generic /boot/vmlinuz-3.13.0-62-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-62-generic /boot/vmlinuz-3.13.0-62-generic
Suppression de linux-image-3.13.0-63-generic (3.13.0-63.103) ...
Purge des fichiers de configuration de linux-image-3.13.0-63-generic (3.13.0-63.103) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-63-generic /boot/vmlinuz-3.13.0-63-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-63-generic /boot/vmlinuz-3.13.0-63-generic
Suppression de linux-image-3.13.0-65-generic (3.13.0-65.106) ...
Purge des fichiers de configuration de linux-image-3.13.0-65-generic (3.13.0-65.106) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
Suppression de linux-image-3.13.0-66-generic (3.13.0-66.108) ...
Purge des fichiers de configuration de linux-image-3.13.0-66-generic (3.13.0-66.108) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-66-generic /boot/vmlinuz-3.13.0-66-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-66-generic /boot/vmlinuz-3.13.0-66-generic
Suppression de linux-image-3.13.0-67-generic (3.13.0-67.110) ...
Purge des fichiers de configuration de linux-image-3.13.0-67-generic (3.13.0-67.110) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-67-generic /boot/vmlinuz-3.13.0-67-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-67-generic /boot/vmlinuz-3.13.0-67-generic
Suppression de linux-image-3.13.0-68-generic (3.13.0-68.111) ...
Purge des fichiers de configuration de linux-image-3.13.0-68-generic (3.13.0-68.111) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-68-generic /boot/vmlinuz-3.13.0-68-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-68-generic /boot/vmlinuz-3.13.0-68-generic
Suppression de linux-image-3.13.0-71-generic (3.13.0-71.114) ...
Purge des fichiers de configuration de linux-image-3.13.0-71-generic (3.13.0-71.114) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-71-generic /boot/vmlinuz-3.13.0-71-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-71-generic /boot/vmlinuz-3.13.0-71-generic
Suppression de linux-image-3.13.0-74-generic (3.13.0-74.118) ...
Purge des fichiers de configuration de linux-image-3.13.0-74-generic (3.13.0-74.118) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-74-generic /boot/vmlinuz-3.13.0-74-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-74-generic /boot/vmlinuz-3.13.0-74-generic
Suppression de linux-image-3.13.0-76-generic (3.13.0-76.120) ...
Purge des fichiers de configuration de linux-image-3.13.0-76-generic (3.13.0-76.120) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-76-generic /boot/vmlinuz-3.13.0-76-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-76-generic /boot/vmlinuz-3.13.0-76-generic
Suppression de linux-image-3.13.0-77-generic (3.13.0-77.121) ...
Purge des fichiers de configuration de linux-image-3.13.0-77-generic (3.13.0-77.121) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-77-generic /boot/vmlinuz-3.13.0-77-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-77-generic /boot/vmlinuz-3.13.0-77-generic
Suppression de linux-image-3.13.0-79-generic (3.13.0-79.123) ...
Purge des fichiers de configuration de linux-image-3.13.0-79-generic (3.13.0-79.123) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-79-generic /boot/vmlinuz-3.13.0-79-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-79-generic /boot/vmlinuz-3.13.0-79-generic
Suppression de linux-image-3.13.0-83-generic (3.13.0-83.127) ...
Purge des fichiers de configuration de linux-image-3.13.0-83-generic (3.13.0-83.127) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-83-generic /boot/vmlinuz-3.13.0-83-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-83-generic /boot/vmlinuz-3.13.0-83-generic
Suppression de linux-image-3.13.0-85-generic (3.13.0-85.129) ...
Purge des fichiers de configuration de linux-image-3.13.0-85-generic (3.13.0-85.129) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-85-generic /boot/vmlinuz-3.13.0-85-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-85-generic /boot/vmlinuz-3.13.0-85-generic
Suppression de linux-image-3.13.0-86-generic (3.13.0-86.131) ...
Purge des fichiers de configuration de linux-image-3.13.0-86-generic (3.13.0-86.131) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-86-generic /boot/vmlinuz-3.13.0-86-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-86-generic /boot/vmlinuz-3.13.0-86-generic
Suppression de linux-image-3.13.0-87-generic (3.13.0-87.133) ...
Purge des fichiers de configuration de linux-image-3.13.0-87-generic (3.13.0-87.133) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-87-generic /boot/vmlinuz-3.13.0-87-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-87-generic /boot/vmlinuz-3.13.0-87-generic
Suppression de linux-image-3.13.0-88-generic (3.13.0-88.135) ...
Purge des fichiers de configuration de linux-image-3.13.0-88-generic (3.13.0-88.135) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-88-generic /boot/vmlinuz-3.13.0-88-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-88-generic /boot/vmlinuz-3.13.0-88-generic
Suppression de linux-image-3.13.0-91-generic (3.13.0-91.138) ...
Purge des fichiers de configuration de linux-image-3.13.0-91-generic (3.13.0-91.138) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-91-generic /boot/vmlinuz-3.13.0-91-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-91-generic /boot/vmlinuz-3.13.0-91-generic
Suppression de linux-image-extra-3.13.0-92-generic (3.13.0-92.139) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
run-parts: executing /etc/kernel/postinst.d/dkms 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
Error! Your kernel headers for kernel 3.13.0-92-generic cannot be found.
Please install the linux-headers-3.13.0-92-generic package,
or use the --kernelsourcedir option to tell DKMS where it's located
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-92-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-92-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-92-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
Purge des fichiers de configuration de linux-image-extra-3.13.0-92-generic (3.13.0-92.139) ...
Suppression de linux-image-3.13.0-92-generic (3.13.0-92.139) ...
Examining /etc/kernel/prerm.d.
run-parts: executing /etc/kernel/prerm.d/dkms 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
update-initramfs: Deleting /boot/initrd.img-3.13.0-92-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-45-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-43-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
Purge des fichiers de configuration de linux-image-3.13.0-92-generic (3.13.0-92.139) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-92-generic /boot/vmlinuz-3.13.0-92-generic
sat@sat-XPS-M1530:~$ Et :
sat@sat-XPS-M1530:~$ sudo apt autoremove --purge
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 11 non mis à jour.
sat@sat-XPS-M1530:~$Hors ligne
#72 Le 06/11/2016, à 20:08
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Merci, je viens juste de procéder à une mise à jour 
Je redémarre et continue tes indications de commandes 
Hors ligne
#73 Le 06/11/2016, à 20:40
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Alors, voici à quoi ressemble le document après avoir ajouté les trois lignes indiquées, tout à la fin, c'est à dire juste après toutes les autres mentions :
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
Option "VertEdgeScroll" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"Je suis désolé, mais là je bloque... car mise à part l'option "enregistré", il n'y a aucune autre option permettant d'"enregistrer sous".
J'ai également la possibilité de créer un nouveau document. Est-ce que je dois donc effectivement créer un nouveau document à l'identique, en ajoutant les 3 lignes mentionnées et le nommer 90-synaptics.conf ?
Hors ligne
#74 Le 06/11/2016, à 20:52
- Coeur Noir
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Attends, pardon, c'est pas à la fin du fichier qu'il faut ajouter mais dans le 3ème paragraphe, comme ça :
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
Option "VertEdgeScroll" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSectionEnsuite mes excuses encore j'avais oublié que gedit en root sous 16.04 est un putain de caillou dans la chaussure ( les fonctions avancées n'y sont plus accessibles, c'est un méchant bug ).
Donc oui tu crées un nouveau fichier que tu nommes 90-synaptics.conf dans /usr/share/X11/xorg.conf.d/
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#75 Le 06/11/2016, à 21:13
- Satire
Re : Disparition du défilement du pavé tactile au passage à Ubuntu 16.04LTS
Pas de souci Coeur Noir, je ne te remercierai jamais assez pour ton accompagnement et ta précieuse aide !
Donc, voici, le résultat après modification :
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
Option "VertEdgeScroll" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSectionHors ligne