Ubuntu-fr

Uggy

Re : probleme imap et pop3

Est ce que je dois toucher le fichier imapd? il est bien fisxer a imapdstart=yes donc cela devrait fonctionner je ne comprend pas

J'imagine que donner les logs pop/imap du serveur et la conf courrier pourrais etre utile a ceux qui connaissent courrier...

Uggy

Re : probleme imap et pop3

lorsque jenvoi avec mon client gmail un mail a un utilisateur virtuel sur ma machine ma machine repond a gmail que mon utilisateur nexiste pas alors que tout est present dans la base de donnée

Quel serveur smtp ? Postfix ?
Ouvre un nouveau thread et lis http://doc.ubuntu-fr.org/serveur/comment_soumettre_un_probleme_postfix_sur_le_forum

flo13

Re : probleme imap et pop3

voici mon fichier imapd

##VERSION: $Id: imapd.dist.in,v 1.38 2006/02/24 02:15:07 mrsam Exp $
#
# imapd created from imapd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2006 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  This configuration file sets various options for the Courier-IMAP server
#  when used with the couriertcpd server.
#  A lot of the stuff here is documented in the manual page for couriertcpd.
#
#  NOTE - do not use \ to split long variable contents on multiple lines.
#  This will break the default imapd.rc script, which parses this file.
#
##NAME: ADDRESS:0
#
#  Address to listen on, can be set to a single IP address.
#
# ADDRESS=127.0.0.01

ADDRESS=0

##NAME: PORT:1
#
#  Port numbers that connections are accepted on.  The default is 143,
#  the standard IMAP port.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possible to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The previous ADDRESS setting is a default for ports that do not have
#  a specified IP address.

PORT=143

##NAME: AUTHSERVICE:0
#
#  It's possible to authenticate using a different 'service' parameter
#  depending on the connection's port.  This only works with authentication
#  modules that use the 'service' parameter, such as PAM.  Example:
#
#  AUTHSERVICE143=imap
#  AUTHSERVICE993=imaps

##NAME: MAXDAEMONS:0
#
#  Maximum number of IMAP servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:0
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=20

##NAME: PIDFILE:0
#
#  File where couriertcpd will save its process ID
#

PIDFILE=/var/run/courier/imapd.pid

##NAME: TCPDOPTS:0
#
# Miscellaneous couriertcpd options that shouldn't be changed.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.                                       
#

LOGGEROPTS="-name=imapd"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the         
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: IMAP_CAPABILITY:1
#
# IMAP_CAPABILITY specifies what most of the response should be to the
# CAPABILITY command.
#
# If you have properly configured Courier to use CRAM-MD5, CRAM-SHA1, or
# CRAM-SHA256 authentication (see INSTALL), set IMAP_CAPABILITY as follows:
#
# IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"
#

IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE"

##NAME: KEYWORDS_CAPABILITY:0
#
# IMAP_KEYWORDS=1 enables custom IMAP keywords.  Set this option to 0 to
# disable custom keywords.

IMAP_KEYWORDS=1

##NAME: ACL_CAPABILITY:0
#
# IMAP_ACL=1 enables IMAP ACL extension. Set this option to 0 to
# disable ACL capabilities announce.

IMAP_ACL=1

##NAME: SMAP1_CAPABILITY:0
#
# EXPERIMENTAL
#
# To enable the experimental "Simple Mail Access Protocol" extensions,
# uncomment the following setting.
#
# SMAP_CAPABILITY=SMAP1

##NAME: IMAP_CAPABILITY_ORIG:2
#
# For use by webadmin

IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"

##NAME: IMAP_PROXY:0
#
# Enable proxying.  See README.proxy

IMAP_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.
#
# PROXY_HOSTNAME=

##NAME: IMAP_PROXY_FOREIGN:0
#
# Proxying to non-Courier servers.  Re-sends the CAPABILITY command after
# logging in to the remote server.  May not work with all IMAP clients.

IMAP_PROXY_FOREIGN=0

##NAME: IMAP_IDLE_TIMEOUT:0
#
# This setting controls how often
# the server polls for changes to the folder, in IDLE mode (in seconds).

IMAP_IDLE_TIMEOUT=60

##NAME: IMAP_CAPABILITY_TLS:0
#
# The following setting will advertise SASL PLAIN authentication after
# STARTTLS is established.  If you want to allow SASL PLAIN authentication
# with or without TLS then just comment this out, and add AUTH=PLAIN to
# IMAP_CAPABILITY

IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"

##NAME: IMAP_TLS_ORIG:0
#
# For use by webadmin

IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"

##NAME: IMAP_DISABLETHREADSORT:0
#
# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
# server side sorting and threading.
#
# Those capabilities will still be advertised, but the server will reject
# them.  Set this option if you want to disable all the extra load from
# server-side threading and sorting.  Not advertising those capabilities
# will simply result in the clients reading the entire folder, and sorting
# it on the client side.  That will still put some load on the server.
# advertising these capabilities, but rejecting the commands, will stop this
# silliness.
#

IMAP_DISABLETHREADSORT=0

##NAME: IMAP_CHECK_ALL_FOLDERS:0
#
# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
# mail in every folder.  Not all IMAP clients use the IMAP's new mail
# indicator, but some do.  Normally new mail is checked only in INBOX,
# because it is a comparatively time consuming operation, and it would be
# a complete waste of time unless mail filters are used to deliver
# mail directly to folders.
#
# When IMAP clients are used which support new mail indication, and when
# mail filters are used to sort incoming mail into folders, setting
# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
# mail in folders.  Note that this will result in slightly more load on the
# server.
#

IMAP_CHECK_ALL_FOLDERS=0

##NAME: IMAP_OBSOLETE_CLIENT:0
#
# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
# what \\HasNoChildren really means.

IMAP_OBSOLETE_CLIENT=0

##NAME: IMAP_UMASK:0
#
# IMAP_UMASK sets the umask of the server process.  The value of IMAP_UMASK is
# simply passed to the "umask" command.  The default value is 022.
#
# This feature is mostly useful for shared folders, where the file permissions
# of the messages may be important.

IMAP_UMASK=022

##NAME: IMAP_ULIMITD:0
#
# IMAP_ULIMITD sets the maximum size of the data segment of the server
# process.  The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
# command (or ulimit -v).  The argument to ulimi sets the upper limit on the
# size of the data segment of the server process, in kilobytes.  The default
# value of 65536 sets a very generous limit of 64 megabytes, which should
# be more than plenty for anyone.
#
# This feature is used as an additional safety check that should stop
# any potential denial-of-service attacks that exploit any kind of
# a memory leak to exhaust all the available memory on the server.
# It is theoretically possible that obscenely huge folders will also
# result in the server running out of memory when doing server-side
# sorting (by my calculations you have to have at least 100,000 messages
# in a single folder, for that to happen).

IMAP_ULIMITD=65536

##NAME: IMAP_USELOCKS:0
#
# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent
# multiple access to the same folder.  This incurs slight additional
# overhead.  Concurrent multiple access will still work without this setting,
# however occasionally a minor race condition may result in an IMAP client
# downloading the same message twice, or a keyword update will fail.
#
# IMAP_USELOCKS=1 is strongly recommended when shared folders are used.

IMAP_USELOCKS=1

##NAME: IMAP_SHAREDINDEXFILE:0
#
# The index of all accessible folders.  Do not change this setting unless
# you know what you're doing.  See README.sharedfolders for additional
# information.

IMAP_SHAREDINDEXFILE=/etc/courier/shared/index

##NAME: IMAP_ENHANCEDIDLE:0
#
# If Courier was compiled with the File Alteration Monitor, setting
# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple
# clients may open the same folder concurrently, and receive updates to
# folder contents in realtime.  See the imapd(8) man page for additional
# information.
#
# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included
# in the IMAP_CAPABILITY list.
#

IMAP_ENHANCEDIDLE=0

##NAME: IMAP_TRASHFOLDERNAME:0
#
# The name of the magic trash Folder.  For MSOE compatibility,
# you can set IMAP_TRASHFOLDERNAME="Deleted Items".
#
# IMPORTANT:  If you change this, you must also change IMAP_EMPTYTRASH

IMAP_TRASHFOLDERNAME=Trash

##NAME: IMAP_EMPTYTRASH:0
#
# The following setting is optional, and causes messages from the given
# folder to be automatically deleted after the given number of days.
# IMAP_EMPTYTRASH is a comma-separated list of folder:days.  The default
# setting, below, purges 7 day old messages from the Trash folder.
# Another useful setting would be:
#
# IMAP_EMPTYTRASH=Trash:7,Sent:30
#
# This would also delete messages from the Sent folder (presumably copies
# of sent mail) after 30 days.  This is a global setting that is applied to
# every mail account, and is probably useful in a controlled, corporate
# environment.
#
# Important: the purging is controlled by CTIME, not MTIME (the file time
# as shown by ls).  It is perfectly ordinary to see stuff in Trash that's
# a year old.  That's the file modification time, MTIME, that's displayed.
# This is generally when the message was originally delivered to this
# mailbox.  Purging is controlled by a different timestamp, CTIME, which is
# changed when the file is moved to the Trash folder (and at other times too).
#
# You might want to disable this setting in certain situations - it results
# in a stat() of every file in each folder, at login and logout.
#

IMAP_EMPTYTRASH=Trash:7

##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
#
# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash.  This
# effectively allows an undo of message deletion by fishing the deleted
# mail from trash.  Trash can be manually expunged as usually, and mail
# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
#
# NOTE: shared folders are still expunged as usual.  Shared folders are
# not affected.
#

IMAP_MOVE_EXPUNGE_TO_TRASH=0

##NAME: OUTBOX:0
#
# The next set of options deal with the "Outbox" enhancement.
# Uncomment the following setting to create a special folder, named
# INBOX.Outbox
#
# OUTBOX=.Outbox

##NAME: SENDMAIL:0
#
# If OUTBOX is defined, mail can be sent via the IMAP connection by copying
# a message to the INBOX.Outbox folder.  For all practical matters,
# INBOX.Outbox looks and behaves just like any other IMAP folder.  If this
# folder doesn't exist it must be created by the IMAP mail client, just
# like any other IMAP folder.  The kicker: any message copied or moved to
# this folder is will be E-mailed by the Courier-IMAP server, by running
# the SENDMAIL program.  Therefore, messages copied or moved to this
# folder must be well-formed RFC-2822 messages, with the recipient list
# specified in the To:, Cc:, and Bcc: headers.  Courier-IMAP relies on
# SENDMAIL to read the recipient list from these headers (and delete the Bcc:
# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the
# message piped on standard input.  $SENDER will be the return address
# of the message, which is set by the authentication module.
#
# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing.
#

SENDMAIL=/usr/sbin/sendmail

##NAME: HEADERFROM:0
#
# For administrative and oversight purposes, the return address, $SENDER
# will also be saved in the X-IMAP-Sender mail header.  This header gets
# added to the sent E-mail (but it doesn't get saved in the copy of the
# message that's saved in the folder)
#
# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive
# the magic OUTBOX treatment.  Therefore advance LARTing is in order for
# _all_ of your lusers, until every one of them is aware of this.  Otherwise if
# OUTBOX is left at its default setting - a folder name that might be used
# accidentally - some people may be in for a rude surprise.  You can redefine
# the name of the magic folder by changing OUTBOX, above.  You should do that
# and pick a less-obvious name.  Perhaps brand it with your organizational
# name ( OUTBOX=.WidgetsAndSonsOutbox )

HEADERFROM=X-IMAP-Sender

##NAME: OUTBOX_MULTIPLE_SEND:0
#
# Remove the following comment to allow a COPY of more than one message to
# the Outbox, at a time.
#
# OUTBOX_MULTIPLE_SEND=1

##NAME: IMAPDSTART:0
#
# IMAPDSTART is not used directly.  Rather, this is a convenient flag to
# be read by your system startup script in /etc/rc.d, like this:
#
#  . /etc/courier/imapd
#
#  case x$IMAPDSTART in
#  x[yY]*)
#        /usr/lib/courier/imapd.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, so you'll have to manually flip
# it to yes.

IMAPDSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir

voici egalement mon fichier pop3d

##VERSION: $Id: pop3d.dist.in,v 1.16 2005/07/05 12:42:51 mrsam Exp $
#
# pop3d created from pop3d.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2004 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  Courier POP3 daemon configuration
#
##NAME: PIDFILE:0
#

PIDFILE=/var/run/courier/pop3d.pid

##NAME: MAXDAEMONS:0
#
#  Maximum number of POP3 servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:4
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=4

##NAME: POP3AUTH:1
#
# To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH
# variable:
#
# POP3AUTH="LOGIN"
#
# If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH
# to something like this:
#
# POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1"

POP3AUTH=""

##NAME: POP3AUTH_ORIG:1
#
# For use by webadmin

POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256"

##NAME: POP3AUTH_TLS:1
#
# To also advertise SASL PLAIN if SSL is enabled, uncomment the
# POP3AUTH_TLS environment variable:
#
# POP3AUTH_TLS="LOGIN PLAIN"

POP3AUTH_TLS=""

##NAME: POP3AUTH_TLS_ORIG:0
#
# For use by webadmin

POP3AUTH_TLS_ORIG="LOGIN PLAIN"

##NAME: POP3_PROXY:0
#
# Enable proxying.  See README.proxy

POP3_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.

# PROXY_HOSTNAME=

##NAME: PORT:1
#
# Port to listen on for connections.  The default is port 110.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possibly to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The ADDRESS setting is a default for ports that do not have a specified
#  IP address.

PORT=110

##NAME: ADDRESS:0
#
# IP address to listen on.  0 means all IP addresses.

ADDRESS=0

##NAME: TCPDOPTS:0
#
# Other couriertcpd(1) options.  The following defaults should be fine.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.
#

LOGGEROPTS="-name=pop3d"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: POP3DSTART:0
#
# POP3DSTART is not referenced anywhere in the standard Courier programs
# or scripts.  Rather, this is a convenient flag to be read by your system
# startup script in /etc/rc.d, like this:
#
#  . /etc/courier/pop3d
#  case x$POP3DSTART in
#  x[yY]*)
#        /usr/lib/courier/pop3d.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, until Courier is shipped by default
# with enough platforms so that people get annoyed with having to flip it to
# YES every time.

POP3DSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir

Pour ce qui est des log je ne trouve pas ou ils sont
mercii

flo13

Re : probleme imap et pop3

donc lorsk que je lance thunderbird le serveur demande mon mot de passe de compte unix je lui entre donc le mot de passe correspondant et la une fenetre pop up mindique impossible de se connecter au serveur " mon serveur" la connexion a échouée
voila si kelkun peu m'aider jsui en train de peter un boulon!!^^

flo13

Re : probleme imap et pop3

voici ce qu'il ya dans mail.info

ay 11 14:22:58 localhost authdaemond: modules="authmysql", daemons=5
May 11 14:22:58 localhost authdaemond: Installing libauthmysql
May 11 14:22:58 localhost authdaemond: Installation complete: authmysql
May 11 14:23:03 localhost dccifd[2637]: 1.2.74 listening to /var/lib/dcc/dccifd
May 11 14:23:05 localhost postfix/master[2715]: daemon started -- version 2.3.8, configuration /etc/postfix
May 11 15:31:36 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]
May 11 15:31:55 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]
May 11 17:25:31 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]
May 11 17:27:46 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]
May 11 17:27:56 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]
May 11 17:30:56 localhost imapd: LOGIN FAILED, user=flo, ip=[::ffff:192.168.5.1]

svp j'ai besoin d'aide

Uggy

Re : probleme imap et pop3

J'y connais rien a "courrier" et j'ai pas lu la doc mais j'aurais tendance a vérifier:

# POP3AUTH="LOGIN"
POP3AUTH=""

flo13

Re : probleme imap et pop3

okiiiiiiiiiiii désolé!!!!!!!! non je pense pas que sa vienne de de pop3 apparamment la configuration est bonne. Et puis l'authentification est faite avec imap il me semble...
Excuse moi encore de ne pa suivre je sui un beuné^^

Uggy

Re : probleme imap et pop3

Effectivement ce n'est pas coté POP mais IMAP

C'est quoi cette ligne ?
authdaemond: modules="authmysql"

L'authentification IMAP se fait par un truc mysql ?

flo13

Re : probleme imap et pop3

Oui effectivement elle se fait par la base de donnée mysql.
En fait toutes les entrées mysql permettent d'authoriser un utilisateur.
Apparament on dirait que l'hote que j'ai créer avec mysql n'existe pas car en telnet mon serveur me  retourne que l'utilisateur n'éxiste pas:/
Je vais essayer de créer un autre utilisateur pour voir.

Mercii

Uggy

Re : probleme imap et pop3

Oui effectivement elle se fait par la base de donnée mysql.

Donc oui il y a de fortes chances que le problème soit au niveau SQL...

flo13

Re : probleme imap et pop3

Bein pour le nouvel utilisateur c'est pareil il y a toujours le même problème d'indentification.
Peut être que la boite mail n'est pas crées? C'est bizarre car dans le tuto http://www.lea-linux.org/cached/index/Postfix-courier-mysql-quota-spamassassin-amavis.html il dise

Attention! L'accès imap ou pop echouera si le repertoire de la boite email de l'utilisateur n'existe pas (si vous venez juste d'ajouter l'email dans la base de données). Je vous conseille d'envoyer un email de bienvenue après la création d'une nouvelle boite.

. Donc il faut que j'envoi un mail dans cette boite mais si elle existe pas ca ne peut pas marcher en telnet lorsque j'essai d'envoyer un mail a cette adresse le systeme me renvoi un mail en disant que l'utilisateur est inconnu. Je pense que le probleme peut venir de la mais comment créer cette boite en envoyant un mail ??

Uggy

Re : probleme imap et pop3

Bein pour le nouvel utilisateur c'est pareil il y a toujours le même problème d'indentification.

Moi je commencerais par faire marcher mon serveur sans utiliser mysql...
Une fois que ca marcheras sans mysql, la tu pourras le rajouter.. (si tu en as vraiment besoin..)

lorsque j'essai d'envoyer un mail a cette adresse le systeme me renvoi un mail en disant que l'utilisateur est inconnu.

Relis mon mail de 10/05/2007, à 20:13

flo13

Re : probleme imap et pop3

Oui mais mysql est indispensable a mon serveur sinon il na aucune utilité car il doit etre mis en service pour des utilisateurs distants

et pour ce qui est du message afficher c'est

imapd: LOGIN FAILED,  user=flo,ip=[::ffff:192.168.0.1]

flo13

Re : probleme imap et pop3

donc il faudrai t que je desinstalle tout mysql??

toniotonio

Re : probleme imap et pop3

il faut surtout que tu verifies les fichiers authmysqlrc et authdaemonrc pour que courier puisse communiquer avec la base sql

---

Tutoriaux Postfix sur www.starbridge.org/spip
Messagerie Dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

flo13

Re : probleme imap et pop3

bein c fait il sont bon normalement le revoici quand meme
voici authdaemonrc

##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ 
# 
# Copyright 2000-2005 Double Precision, Inc.  See COPYING for 
# distribution information. 
# 
# authdaemonrc created from authdaemonrc.dist by sysconftool 
# 
# Do not alter lines that begin with ##, they are used when upgrading 
# this configuration. 
# 
# This file configures authdaemond, the resident authentication daemon. 
# 
# Comments in this file are ignored.  Although this file is intended to 
# be sourced as a shell script, authdaemond parses it manually, so 
# the acceptable syntax is a bit limited.  Multiline variable contents, 
# with the \ continuation character, are not allowed.  Everything must 
# fit on one line.  Do not use any additional whitespace for indentation, 
# or anything else. 

##NAME: authmodulelist:2 
# 
# The authentication modules that are linked into authdaemond.  The 
# default list is installed.  You may selectively disable modules simply 
# by removing them from the following list.  The available modules you 
# can use are: authuserdb authpam authpgsql authldap authmysql authcustom authpipe 

#authmodulelist="authpam" 
authmodulelist="authmysql" 

##NAME: authmodulelistorig:3 
# 
# This setting is used by Courier's webadmin module, and should be left 
# alone 

authmodulelistorig="authuserdb authpam authpgsql authldap authmysql authcustom authpipe" 

##NAME: daemons:0 
# 
# The number of daemon processes that are started.  authdaemon is typically 
# installed where authentication modules are relatively expensive: such 
# as authldap, or authmysql, so it's better to have a number of them running. 
# PLEASE NOTE:  Some platforms may experience a problem if there's more than 
# one daemon.  Specifically, SystemV derived platforms that use TLI with 
# socket emulation.  I'm suspicious of TLI's ability to handle multiple 
# processes accepting connections on the same filesystem domain socket. 
# 
# You may need to increase daemons if as your system load increases.  Symptoms 
# include sporadic authentication failures.  If you start getting 
# authentication failures, increase daemons.  However, the default of 5 
 SHOULD be sufficient.  Bumping up daemon count is only a short-term 
# solution.  The permanent solution is to add more resources: RAM, faster 
# disks, faster CPUs... 

daemons=5 

##NAME: authdaemonvar:2 
# 
# authdaemonvar is here, but is not used directly by authdaemond.  It's 
# used by various configuration and build scripts, so don't touch it! 

authdaemonvar=/var/run/courier/authdaemon 

##NAME: DEBUG_LOGIN:0 
# 
# Dump additional diagnostics to syslog 
# 
# DEBUG_LOGIN=0   - turn off debugging 
# DEBUG_LOGIN=1   - turn on debugging 
# DEBUG_LOGIN=2   - turn on debugging + log passwords too 
# 
# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. 
# 
# Note that most information is sent to syslog at level 'debug', so 
# you may need to modify your /etc/syslog.conf to be able to see it. 

DEBUG_LOGIN=0 

##NAME: DEFAULTOPTIONS:0 
# 
# A comma-separated list of option=value pairs. Each option is applied 
# to an account if the account does not have its own specific value for 
# that option. So for example, you can set 
#   DEFAULTOPTIONS="disablewebmail=1,disableimap=1" 
# and then enable webmail and/or imap on individual accounts by setting 
# disablewebmail=0 and/or disableimap=0 on the account. 

DEFAULTOPTIONS="" 

##NAME: LOGGEROPTS:0 
# 
# courierlogger(1) options, e.g. to set syslog facility 
# 

LOGGEROPTS="" 

##NAME: LDAP_TLS_OPTIONS:0 
# 
# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. 
# Examples: 
# 
#LDAPTLS_CACERT=/path/to/cacert.pem 
#LDAPTLS_REQCERT=demand 
#LDAPTLS_CERT=/path/to/clientcert.pem 
#LDAPTLS_KEY=/path/to/clientkey.pem

flo13

Re : probleme imap et pop3

et voici authmysqlrc

##VERSION: $Id: authmysqlrc,v 1.18 2004/11/14 02:58:16 mrsam Exp $ 
# 
# Copyright 2000-2004 Double Precision, Inc.  See COPYING for 
# distribution information. 
# 
# Do not alter lines that begin with ##, they are used when upgrading 
# this configuration. 
# 
# authmysqlrc created from authmysqlrc.dist by sysconftool 
# 
# DO NOT INSTALL THIS FILE with world read permissions.  This file 
# might contain the MySQL admin password! 
# 
# Each line in this file must follow the following format: 
# 
# field[spaces|tabs]value 
# 
# That is, the name of the field, followed by spaces or tabs, followed by 
# field value.  Trailing spaces are prohibited. 


##NAME: LOCATION:0 
# 
# The server name, userid, and password used to log in. 

MYSQL_SERVER            localhost 
MYSQL_USERNAME          postfix 
MYSQL_PASSWORD          pass 

##NAME: MYSQL_SOCKET:0 
# 
# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the 
# filesystem pipe used for the connection 
# 
# MYSQL_SOCKET          /var/run/mysqld/mysqld.sock 

##NAME: MYSQL_PORT:0 
# 
# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to 
# connect to. 

MYSQL_PORT              0 

##NAME: MYSQL_OPT:0 
# 
# Leave MYSQL_OPT as 0, unless you know what you're doing. 

MYSQL_OPT               0 

##NAME: MYSQL_DATABASE:0 
# 
# The name of the MySQL database we will open: 

MYSQL_DATABASE          postfix 

##NAME: MYSQL_USER_TABLE:0 
# 
# The name of the table containing your user data.  See README.authmysqlrc 
# for the required fields in this table. 

MYSQL_USER_TABLE        mailbox 

##NAME: MYSQL_CRYPT_PWFIELD:0 
# 
# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined.  Both 
# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext 
# passwords go into MYSQL_CLEAR_PWFIELD.  Cleartext passwords allow 
# CRAM-MD5 authentication to be implemented. 

MYSQL_CRYPT_PWFIELD     password 

##NAME: MYSQL_CLEAR_PWFIELD:0 
# 
# 
# MYSQL_CLEAR_PWFIELD   clear 

##NAME: MYSQL_DEFAULT_DOMAIN:0 
# 
# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user', 
# we will look up 'user@DEFAULT_DOMAIN' instead. 
# 
# 
# DEFAULT_DOMAIN                axess.net 

##NAME: MYSQL_UID_FIELD:0 
# 
# Other fields in the mysql table: 
# 
# MYSQL_UID_FIELD - contains the numerical userid of the account 
# 
MYSQL_UID_FIELD         5000 

##NAME: MYSQL_GID_FIELD:0 
# 
# Numerical groupid of the account 
MYSQL_GID_FIELD         5000 

##NAME: MYSQL_LOGIN_FIELD:0 
# 
# The login id, default is id.  Basically the query is: 
# 
#  SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid' 
# 

MYSQL_LOGIN_FIELD       email 

##NAME: MYSQL_HOME_FIELD:0 
# 

MYSQL_HOME_FIELD        "/var/spool/vmail/" 

##NAME: MYSQL_NAME_FIELD:0 
# 
# The user's name (optional) 

#MYSQL_NAME_FIELD       name 

##NAME: MYSQL_MAILDIR_FIELD:0 
# 
# This is an optional field, and can be used to specify an arbitrary 
# location of the maildir for the account, which normally defaults to 
# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD). 
# 
# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this 
# out. 
# 
MYSQL_MAILDIR_FIELD  CONCAT(SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1),'/') 

##NAME: MYSQL_DEFAULTDELIVERY:0 
# 
# Courier mail server only: optional field specifies custom mail delivery 
# instructions for this account (if defined) -- essentially overrides 
# DEFAULTDELIVERY from ${sysconfdir}/courierd 
# 
# MYSQL_DEFAULTDELIVERY defaultdelivery 

##NAME: MYSQL_QUOTA_FIELD:0 
# 
# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally 
# specify a maildir quota.  See README.maildirquota for more information 
# 
MYSQL_QUOTA_FIELD       quota 
##NAME: MYSQL_AUXOPTIONS:0 
# 
# Auxiliary options.  The MYSQL_AUXOPTIONS field should be a char field that 
# contains a single string consisting of comma-separated "ATTRIBUTE=NAME" 
# pairs.  These names are additional attributes that define various per-account 
# "options", as given in INSTALL's description of the "Account OPTIONS" 
# setting. 
# 
# MYSQL_AUXOPTIONS_FIELD        auxoptions 
# 
# You might want to try something like this, if you'd like to use a bunch 
# of individual fields, instead of a single text blob: 
# 
# MYSQL_AUXOPTIONS_FIELD        CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup) 
# 
# This will let you define fields called "disableimap", etc, with the end result 
# being something that the OPTIONS parser understands. 


##NAME: MYSQL_WHERE_CLAUSE:0 
# 
# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary 
# fixed string that is appended to the WHERE clause of our query 
# 
# MYSQL_WHERE_CLAUSE    server='mailhost.example.com' 

##NAME: MYSQL_SELECT_CLAUSE:0 
# 
# (EXPERIMENTAL) 
# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database, 
# which is structuraly different from proposed. The fixed string will 
# be used to do a SELECT operation on database, which should return fields 
# in order specified bellow: 
# 
# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options 
# 
# The username field should include the domain (see example below). 
# 
# Enabling this option causes ignorance of any other field-related 
# options, excluding default domain. 
# 
# There are two variables, which you can use. Substitution will be made 
# for them, so you can put entered username (local part) and domain name 
# in the right place of your query. These variables are: 
#               $(local_part), $(domain), $(service) 
#               $(local_part), $(domain), $(service) 
# 
# If a $(domain) is empty (not given by the remote user) the default domain 
# name is used in its place. 
# 
# $(service) will expand out to the service being authenticated: imap, imaps, 
# pop3 or pop3s.  Courier mail server only: service will also expand out to 
# "courier", when searching for local mail account's location.  In this case, 
# if the "maildir" field is not empty it will be used in place of 
# DEFAULTDELIVERY.  Courier mail server will also use esmtp when doing 
# authenticated ESMTP. 
# 
# This example is a little bit modified adaptation of vmail-sql 
# database scheme: 
# 
# MYSQL_SELECT_CLAUSE   SELECT CONCAT(popbox.local_part, '@', popbox.domain_name),                      \ 
#                       CONCAT('{MD5}', popbox.password_hash),          \ 
#                       popbox.clearpw,                                 \ 
#                       domain.uid,                                     \ 
#                       domain.gid,                                     \ 
#                       CONCAT(domain.path, '/', popbox.mbox_name),     \ 
#                       '',                                             \ 
#                       domain.quota,                                   \ 
#                       '',                                             \ 
#                       CONCAT("disableimap=",disableimap,",disablepop3=",    \ 
#                              disablepop3,",disablewebmail=",disablewebmail, \ 
#                              ",sharedgroup=",sharedgroup)             \ 
#                       FROM popbox, domain                             \ 
#                       WHERE popbox.local_part = '$(local_part)'       \ 
#                       AND popbox.domain_name = '$(domain)'            \ 
#                       AND popbox.domain_name = domain.domain_name 


##NAME: MYSQL_ENUMERATE_CLAUSE:1 
# 
# {EXPERIMENTAL} 
# Optional custom SQL query used to enumerate accounts for authenumerate, 
# in order to compile a list of accounts for shared folders.  The query 
# should return the following fields: name, uid, gid, homedir, maildir, options 
# 
# Example: 
# MYSQL_ENUMERATE_CLAUSE        SELECT CONCAT(popbox.local_part, '@', popbox.domain_name),                      \ 
#                       domain.uid,                                     \ 
#                       domain.gid,                                     \ 
#                       CONCAT(domain.path, '/', popbox.mbox_name),     \ 
#                       '',                                             \ 
#                       CONCAT('sharedgroup=', sharedgroup)             \ 
#                       FROM popbox, domain                             \ 
#                       WHERE popbox.local_part = '$(local_part)'       \ 
                       FROM popbox, domain                             \ 
#                       WHERE popbox.local_part = '$(local_part)'       \ 
#                       AND popbox.domain_name = '$(domain)'            \ 
#                       AND popbox.domain_name = domain.domain_name 



##NAME: MYSQL_CHPASS_CLAUSE:0 
# 
# (EXPERIMENTAL) 
# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database, 
# which is structuraly different from proposed. The fixed string will 
# be used to do an UPDATE operation on database. In other words, it is 
# used, when changing password. 
# 
# There are four variables, which you can use. Substitution will be made 
# for them, so you can put entered username (local part) and domain name 
# in the right place of your query. There variables are: 
#       $(local_part) , $(domain) , $(newpass) , $(newpass_crypt) 
# 
# If a $(domain) is empty (not given by the remote user) the default domain 
# name is used in its place. 
# $(newpass) contains plain password 
# $(newpass_crypt) contains its crypted form 
# 
# MYSQL_CHPASS_CLAUSE   UPDATE  popbox                                  \ 
#                       SET     clearpw='$(newpass)',                   \ 
#                               password_hash='$(newpass_crypt)'        \ 
#                       WHERE   local_part='$(local_part)'              \ 
#                       AND     domain_name='$(domain)' 
#

je ne vois pas ce qui pourrait etre mal configurer

toniotonio

Re : probleme imap et pop3

verifie que le fichier ne comporte pas d'espace a la fin d'un parametre

active les logs dans mysql et regarde ce qu'ils disent

---

Tutoriaux Postfix sur www.starbridge.org/spip
Messagerie Dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Uggy

Re : probleme imap et pop3

et pour ce qui est du message afficher c'est
imapd: LOGIN FAILED,  user=flo,ip=[::ffff:192.168.0.1]

Non... Le log quand ton serveur SMTP rejette un mail n'est pas "imapd: LOGIN FAILED" pour la simple et bonne raison que imapd ne fait pas du SMTP.

flo13

Re : probleme imap et pop3

euhh comment on active les log dans mysql??

toniotonio

Re : probleme imap et pop3

tu edites le /etc/mysql/my.cnf et tu decommentes la ligne

#log		= /var/log/mysql/mysql.log

puis

/etc/init.d/mysql restart

Dernière modification par toniotonio (Le 24/05/2007, à 11:51)

---

Tutoriaux Postfix sur www.starbridge.org/spip
Messagerie Dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Uggy

Re : probleme imap et pop3

Oui mais mysql est indispensable a mon serveur sinon il na aucune utilité car il doit etre mis en service pour des utilisateurs distants

C'est pour cela que je te disais:
"Une fois que ca marcheras sans mysql, la tu pourras le rajouter"

Tu attaques de front tous les problèmes:
- Imap qui démarrait pas et qui maintenant n'identifie pas
- Smtp qui rejette tes mails
- MySql mal paramétré

Je te conseille d'attaquer les problèmes un par un... Ne vient pas de plaindre après que tu t'embrouilles ou que c'est compliqué...

Dernière modification par Uggy (Le 24/05/2007, à 12:10)

flo13

Re : probleme imap et pop3

oki bein alors je vais desintaller mysql le problème est qu'il faut que je change la configuration et je ne sait pas forcement ce qu'il faudra que je change.

Uggy

Re : probleme imap et pop3

oki bein alors je vais desintaller mysql le problème est qu'il faut que je change la configuration et je ne sait pas forcement ce qu'il faudra que je change.

Ne désinstalle rien!!! ... Je dis juste qu'il pourrait etre judicieux ne ne pas l'utiliser dans un 1er temps...
(et pas besoin de désinstaller pour ne pas l'utiliser....)

flo13

Re : probleme imap et pop3

okiii desole mai je suis pas trop a l'aise avec linux.Est ce avec ces lignes la que je peu ne pluq utilisé mysql??

#authmodulelist="authpam" 
authmodulelist="authmysql"