Ubuntu-fr

maximome

xorg.conf : Section Device en double, Normal ?

Bonjour,

est-ce normal d'avoir 2 sections Device :

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Driver      "ati"
	Option	    "AddARGBGLXVisuals" "true"
	Option	    "TripleBuffer" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option	    "DesktopSetup" "single"
	Option	    "TVFormat" "PAL-N"
EndSection

Pour info: j'avais les pilotes libres installés par défaut avec ubuntu (1800 fps) puis j'ai installé les pilotes propriétaires (1500 fps)

best_friend_fr

Re : xorg.conf : Section Device en double, Normal ?

Salut

Apparemment, tu as utilisé aticonfig.

En fait, tu peux avoir pleins de section device, une seule (ou 2 dans certains cas de multi écrans) étant utilisés.

En fait, regarde ta section
ServerLayout, elle pointe vers un screen
regarde la section Screen correspondant
elle pointe vers un device.

C'est ce device qui est utilisé.

---

sudo apt-get replace langage_sms by grammaire orthographe ponctuation
La documentation est avant tout faite pour ceux qui posent les questions, et non ceux qui y répondent
Best_friend_fr

maximome

Re : xorg.conf : Section Device en double, Normal ?

je comprends mieux, mais selon ma config ca voudrais dire que j'utilise le driver "ati" libre ?

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Driver      "ati"
	Option	    "AddARGBGLXVisuals" "true"
	Option	    "TripleBuffer" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "on"
	Option	    "DesktopSetup" "single"
	Option	    "TVFormat" "PAL-N"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x800"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "RENDER" "Enable"
	Option	    "Composite" "disable"
EndSection

J'ai un portable acer aspire 1682wlmi. j'aimerais optimiser le système avec les drivers propriétaires. Ou puis-je trouver des docs pour les options du xorg.conf.

best_friend_fr

Re : xorg.conf : Section Device en double, Normal ?

Non, d'après ton fichier, tu utilises fglrx.

---

sudo apt-get replace langage_sms by grammaire orthographe ponctuation
La documentation est avant tout faite pour ceux qui posent les questions, et non ceux qui y répondent
Best_friend_fr