Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 30/11/2020, à 10:06

kkwet38

[Résolu] Bootmgr

Bonjour à tous,
de temps en temps, mon PC ne veut plus démarrer "BOOTMGR IS MISSING".
Cette fois-ci encore, après un boot depuis une clé USB, le problème a disparu. J'ai eu le temps de vérifier chaque file system, tout était OK.
Je me demande si un grave problème matériel n'est pas en train de se préparer. Qu'en pensez-vous?
Cordialement
André

Dernière modification par kkwet38 (Le 13/02/2023, à 13:13)


Ubuntu 22.04.1 LTS

Hors ligne

#2 Le 30/11/2020, à 11:00

geole

Re : [Résolu] Bootmgr

Bonjour
Dans le doute, Tu peux  publier l'état des disques: installer l'application smartmontools puis paragraphe 3.1


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#3 Le 30/11/2020, à 13:06

kkwet38

Re : [Résolu] Bootmgr

Bonjour,
résultat de la commande sudo smartctl -s on -a /dev/sda1 :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-54-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-75WN4A0
Serial Number:    WD-WCC6Y7RLSFCN
LU WWN Device Id: 5 0014ee 20e10f302
Firmware Version: 01.01A01
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Nov 30 13:01:18 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(11040) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 114) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   176   169   021    Pre-fail  Always       -       2200
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1690
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       14461
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1690
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       61
193 Load_Cycle_Count        0x0032   128   128   000    Old_age   Always       -       217183
194 Temperature_Celsius     0x0022   096   087   000    Old_age   Always       -       47
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   083   083   000    Old_age   Always       -       12648
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       21596178194
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       37534032781

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Cela ne m'informe pas beaucoup.
André


Ubuntu 22.04.1 LTS

Hors ligne

#4 Le 30/11/2020, à 15:22

kkwet38

Re : [Résolu] Bootmgr

Après un test long :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-54-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-75WN4A0
Serial Number:    WD-WCC6Y7RLSFCN
LU WWN Device Id: 5 0014ee 20e10f302
Firmware Version: 01.01A01
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Nov 30 15:19:39 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(11040) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 114) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   176   169   021    Pre-fail  Always       -       2200
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1690
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       14463
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1690
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       61
193 Load_Cycle_Count        0x0032   128   128   000    Old_age   Always       -       217183
194 Temperature_Celsius     0x0022   093   087   000    Old_age   Always       -       50
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   083   083   000    Old_age   Always       -       12651
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       21597712466
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       37581733790

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     14463         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ubuntu 22.04.1 LTS

Hors ligne

#5 Le 30/11/2020, à 16:18

geole

Re : [Résolu] Bootmgr

Le premier rapport montre que le disque est en bon état .
A mon avis, de temps en temps, le boot se déclenche en mode LEGACY au lieu du mode EFI, à moins que cela soit l'inverse.
On va regarder comment c'est installé, Peux-tu fournir un rapport de boot-info?


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#6 Le 30/11/2020, à 16:51

kkwet38

Re : [Résolu] Bootmgr

Voici l'URL du rapport :
https://paste.ubuntu.com/p/6CRyd2FjPV/


Ubuntu 22.04.1 LTS

Hors ligne

#7 Le 30/11/2020, à 17:17

geole

Re : [Résolu] Bootmgr

A mon avis, de temps en temps, le boot se déclenche en mode EFI au lieu du mode LEGACY


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#8 Le 30/11/2020, à 17:43

kkwet38

Re : [Résolu] Bootmgr

Mais que faire ?


Ubuntu 22.04.1 LTS

Hors ligne

#9 Le 30/11/2020, à 17:45

xubu1957

Re : [Résolu] Bootmgr

Bonjour,

Collage du boot-info :

boot-info-4ppa125                                              [20201130_1649]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        


================================ 1 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-54-generic root=UUID=77e76ccb-d6a5-4636-8018-d7b59e3ef4ea ro quiet splash vt.handoff=7


===================================== UEFI =====================================

This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.032661] ACPI: UEFI 0x00000000BCEB1110 000042 (v01 ALASKA A M I    01072009      00000000)



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	not-far
sda6	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda6	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda6	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sdb1	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0xf0523dc7
      Boot     Start        End    Sectors   Size Id Type
sda1  *         2048   93750094   93748047  44.7G 83 Linux
sda2        93751294 1953523711 1859772418 886.8G  5 Extended
sda5        93751296  101562367    7811072   3.7G 82 Linux swap / Solaris
sda6       101564416 1953523711 1851959296 883.1G 83 Linux
Disk sdb: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x00074b33
      Boot Start        End    Sectors   Size Id Type
sdb1        2048 1953523711 1953521664 931.5G 83 Linux
sdb3  *        0          0          0     0B  0 Empty
sdb4  *        0          0          0     0B  0 Empty
Partition table entries are not in disk order.

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-75W:;
1:1049kB:48.0GB:48.0GB:ext4::boot;
2:48.0GB:1000GB:952GB:::;
5:48.0GB:52.0GB:3999MB:linux-swap(v1)::;
6:52.0GB:1000GB:948GB:ext4::;
sdb:1000GB:scsi:512:512:msdos:ATA Hitachi HDS72101:;
1:1049kB:1000GB:1000GB:ext4::;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL      PARTLABEL
sda                                                                                                  
├─sda1 ext4     77e76ccb-d6a5-4636-8018-d7b59e3ef4ea f0523dc7-01                                     
├─sda2                                               f0523dc7-02                                     
├─sda5 swap     abd91d40-76be-4068-a42b-d593dc3c0121 f0523dc7-05                                     
└─sda6 ext4     b385ab5b-ee82-4537-834c-35d59f3febba f0523dc7-06                                     
sdb                                                                                                  
└─sdb1 ext4     6b7f1b31-6b01-4f08-9bf3-5506f551bfaf 00074b33-01                          sauvegarde 

df (filtered): _________________________________________________________________

                   Avail Use% Mounted on
sda1               27.5G  32% /
sda6              249.8G  66% /home
sdb1              123.9G  81% /media/andre/sauvegarde

Mount options: __________________________________________________________________

sda1              rw,relatime,errors=remount-ro
sda6              rw,relatime
sdb1              rw,relatime

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   77e76ccb-d6a5-4636-8018-d7b59e3ef4ea
Ubuntu, avec Linux 5.4.0-54-generic   77e76ccb-d6a5-4636-8018-d7b59e3ef4ea
Ubuntu, avec Linux 5.4.0-53-generic   77e76ccb-d6a5-4636-8018-d7b59e3ef4ea
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=77e76ccb-d6a5-4636-8018-d7b59e3ef4ea /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda6 during installation
UUID=b385ab5b-ee82-4537-834c-35d59f3febba /home           ext4    defaults        0       2
# /media/andre/sauvegarde was on /dev/sdb1 during installation
UUID=6b7f1b31-6b01-4f08-9bf3-5506f551bfaf /media/andre/sauvegarde ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=abd91d40-76be-4068-a42b-d593dc3c0121 none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
   8.231777191 = 8.838803456    boot/grub/grub.cfg                             2
   8.134857178 = 8.734736384    boot/grub/i386-pc/core.img                     1
   7.339977264 = 7.881240576    boot/vmlinuz                                   1
  37.082164764 = 39.816671232   boot/vmlinuz-5.4.0-53-generic                  1
   7.339977264 = 7.881240576    boot/vmlinuz-5.4.0-54-generic                  1
  37.082164764 = 39.816671232   boot/vmlinuz.old                               1
   7.516136169 = 8.070389760    boot/initrd.img                                3
   3.781936646 = 4.060823552    boot/initrd.img-5.4.0-53-generic               2
   7.516136169 = 8.070389760    boot/initrd.img-5.4.0-54-generic               3
   3.781936646 = 4.060823552    boot/initrd.img.old                            2

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 oct.   1 17:19 10_linux
-rwxr-xr-x 1 root root 42359 oct.   1 17:19 10_linux_zfs
-rwxr-xr-x 1 root root 12894 juil. 31 02:34 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 31 02:34 30_os-prober
-rwxr-xr-x 1 root root  1424 juil. 31 02:34 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 31 02:34 40_custom
-rwxr-xr-x 1 root root   216 juil. 31 02:34 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda2

00000000  d1 6d 72 3d 38 37 95 3d  d8 3a d4 3d 72 ac e5 3d  |.mr=87.=.:.=r..=|
00000010  18 91 8c 3d 80 6b 3e ba  97 b8 10 bd 50 53 fc bc  |...=.k>.....PS..|
00000020  c1 5a 55 bd 7f ac e5 bd  8c 64 1f be 20 d4 29 be  |.ZU......d.. .).|
00000030  37 41 27 be c8 f2 23 be  b9 04 26 be a0 f1 25 be  |7A'...#...&...%.|
00000040  d0 b0 2a be 0e 73 4d be  e3 e6 76 be 8c cf 7d be  |..*..sM...v...}.|
00000050  ce db 6d be 93 db 65 be  bc 73 71 be 40 cd 82 be  |..m...e..sq.@...|
00000060  5d 89 89 be 50 51 94 be  b3 38 a4 be 88 3b a9 be  |]...PQ...8...;..|
00000070  96 e6 a8 be 9f 1f b4 be  0c e3 be be d2 d9 b4 be  |................|
00000080  c4 eb 98 be b5 e7 83 be  62 ae 89 be cd bf 98 be  |........b.......|
00000090  ae 0c 96 be d9 b6 8d be  f0 4d 97 be 2f a0 ab be  |.........M../...|
000000a0  11 08 b3 be f6 bd a1 be  fa f9 85 be 32 64 75 be  |............2du.|
000000b0  1f 14 82 be 8d 82 85 be  15 88 80 be 14 f1 83 be  |................|
000000c0  d4 b9 8b be cc d2 83 be  91 4d 68 be cd ab 62 be  |.........Mh...b.|
000000d0  ba d9 64 be da d1 47 be  2e 43 14 be c4 61 eb bd  |..d...G..C...a..|
000000e0  72 69 09 be d2 5a 37 be  ca ae 49 be a4 c5 33 be  |ri...Z7...I...3.|
000000f0  ba ef 13 be 8a bf f0 bd  81 b5 aa bd 68 11 4b bd  |............h.K.|
00000100  88 4a 3d bd 99 e4 8a bd  09 f3 b0 bd fd 6d ef bd  |.J=..........m..|
00000110  0c 1e 27 be 28 8b 2a be  60 a7 d9 bd 62 8d 29 bd  |..'.(.*.`...b.).|
00000120  c8 f7 5f bc 3c 1c 06 bc  10 9d a8 bb 04 72 3d bc  |.._.<........r=.|
00000130  26 8a eb bc 82 4a e9 bc  00 da 52 3a 63 a8 25 3d  |&....J....R:c.%=|
00000140  f4 a0 aa 3d 7f 9e 01 3e  ab 28 28 3e 08 f8 47 3e  |...=...>.((>..G>|
00000150  30 02 4c 3e f0 94 2d 3e  3a d0 1a 3e a7 d2 2e 3e  |0.L>..->:..>...>|
00000160  f8 31 50 3e e7 51 65 3e  11 5f 6e 3e bf 52 80 3e  |.1P>.Qe>._n>.R.>|
00000170  e4 df 8f 3e 05 9e 97 3e  e0 0f 97 3e e6 34 97 3e  |...>...>...>.4.>|
00000180  2c a9 91 3e 20 aa 83 3e  45 ed 66 3e 32 ec 43 3e  |,..> ..>E.f>2.C>|
00000190  a4 51 32 3e 3f 3c 4b 3e  7e 89 72 3e 4c 2e 73 3e  |.Q2>?<K>~.r>L.s>|
000001a0  14 6b 4c 3e 9b aa 2e 3e  1e 60 20 3e 22 57 f2 3d  |.kL>...>.` >"W.=|
000001b0  14 d0 a8 3d 1c 2e e3 3d  0e 41 2e 3e 91 b7 00 fe  |...=...=.A.>....|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 30 77 00 00 fe  |...........0w...|
000001d0  c2 ff 05 fe c2 ff 30 36  77 00 d2 a9 62 6e 00 00  |......06w...bn..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s      

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your BIOS boot on sda (ATA WDC WD10EZEX-75W) disk!

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#10 Le 30/11/2020, à 17:51

didierfou

Re : [Résolu] Bootmgr

Mon pc (avec de l'âge) démarrait un coup sur deux (sans message).Puis pour finir, plus du tout ! Je pensais carte mère,processeur .. et j'ai changé la pile ... problème résolu.Donc, si le pc à de l'âge, vérifier l'état de la pile.
df


Ubuntu 20.04 focal (x86-64) Cinnamon 4.4.8 Noyau 5.4.0-48 generic Processeur A4-6300 APU with radeon HD graphics x1  Mémoire vive 7Go DD 1500Go carte graphique : advanced micro devices,inc (AMD/ATI) Richland Radeon HD 8370D (pror-if 00 VGA controller)

Hors ligne

#11 Le 30/11/2020, à 18:16

kkwet38

Re : [Résolu] Bootmgr

Je vais vérifier la pile.


Ubuntu 22.04.1 LTS

Hors ligne