Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 18/12/2019, à 22:41

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Nickel, pas besoin de chercher plus loin.
Merci encore !


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#27 Le 18/12/2019, à 22:44

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Et le Bluetooth, toujours en rade ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#28 Le 21/12/2019, à 14:58

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Oui complètement.
Pas grave j'ai acheté une rallonge pour aller jusqu'à l'enceinte.
Ce qui m'étonne c'est que avec l'arrivée des nouveaux noyaux ça devrait aller de mieux en mieux or là ça se dégrade : la version précédente tout marchait...


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#29 Le 21/12/2019, à 15:13

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Bonjour,

Quand je vois qu'il faut rajouter une deuxième antenne pour avoir du Bluetooth roll > [Résolu] Bluetooth activé sur Lenovo ne détecte pas les périphériques


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#30 Le 21/12/2019, à 21:49

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Je viens de voir des améliorations dans le linux-firmware > ubuntuupdates.org/package/core/bionic/main/updates/linux-firmware

pour le bug > launchpad.net/ubuntu/+source/linux-firmware/+bug/1856077

Montre :

dpkg -l | grep linux-firmware

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#31 Le 13/01/2020, à 20:27

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Xubu, il se trouve qu'à la mise à jour du noyau, j'ai reperdu le wifi et que j'ai du booter sous l'ancien noyau pour l'avoir de nouveau.
J'ai eu beau refaire les manips du message 4 : rien n'y fait.

Une idée ?


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#32 Le 13/01/2020, à 20:44

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Bonjour,

Il y a aussi des commandes supplémentaires :

Le 25/04/2019, NicoApi73 a écrit :

Bonjour,

Normalement, ceci devrait fonctionner :

cd ~
git clone https://github.com/lwfinger/rtlwifi_new.git
cd rtlwifi_new/
git checkout origin/extended -b extended
source dkms.conf
sudo mkdir /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
sudo cp -r * /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
sudo dkms add $PACKAGE_NAME/$PACKAGE_VERSION
sudo dkms autoinstall $PACKAGE_NAME/$PACKAGE_VERSION

EDIT : surtout donne l'intégralité des retours STP

> [Résolu] Carte Wifi RTL8723DE non reconnu

Mais là, ça me passe au dessus du béret !


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#33 Le 13/01/2020, à 21:14

NicoApi73

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Salut,

il faut installer dkms avant :

sudo apt install dkms

Pour ta compréhension :
-------------------------------------------------------------------------------------------

make
sudo make install

Avec make, tu compiles et construit ton module en suivant les règles de compilation données dans le fichier Makefile
sudo make install va appliquer les règles définies dans le Makefile écrite dans la section install : (ce sont des règles de création de répertoire et de copie de fichiers ko issus de la compilation)

Cette méthode compile et installe en one shot. Si les interfaces du noyau changent, le module ne fonctionne plus.


--------------------------------------------------------------------------------------------

source dkms.conf
sudo mkdir /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
sudo cp -r * /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
sudo dkms add $PACKAGE_NAME/$PACKAGE_VERSION
sudo dkms autoinstall $PACKAGE_NAME/$PACKAGE_VERSION

Ca récupère les noms définis dans le fichier dkms.conf
Ensuite ça crée un répertoire dans /usr/src dans lequel on copie l'ensemble des fichiers contenant le code source et le Makefile
La commande dkms add dit à dkms de gérer ce module (on l'ajoute dans l'arbre dkms)
la commande

dkms autoinstall

va compiler les sources en suivants les règles définies dans le Makefile et les installer dans les répertoires.
La seule différence par rapport au one shot c'est qu'au changement de noyau, les sources sont de nouveau compilées et les modules installés

Dernière modification par NicoApi73 (Le 13/01/2020, à 21:15)

Hors ligne

#34 Le 13/01/2020, à 21:15

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

david@david-HP-Pavilion-Laptop:~$ cd ~
david@david-HP-Pavilion-Laptop:~$ git clone https://github.com/lwfinger/rtlwifi_new.git
fatal: le chemin de destination 'rtlwifi_new' existe déjà et n'est pas un répertoire vide.
david@david-HP-Pavilion-Laptop:~$ git clone https://github.com/lwfinger/rtlwifi_new.git
Clonage dans 'rtlwifi_new'...
remote: Enumerating objects: 235, done.
remote: Counting objects: 100% (235/235), done.
remote: Compressing objects: 100% (177/177), done.
remote: Total 6462 (delta 118), reused 133 (delta 58), pack-reused 6227
Réception d'objets: 100% (6462/6462), 15.95 MiB | 1.31 MiB/s, fait.
Résolution des deltas: 100% (5148/5148), fait.
david@david-HP-Pavilion-Laptop:~$ cd rtlwifi_new/
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ git checkout origin/extended -b extended
La branche 'extended' est paramétrée pour suivre la branche distante 'extended' depuis 'origin'.
Basculement sur la nouvelle branche 'extended'
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ source dkms.conf
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo mkdir /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
[sudo] Mot de passe de david : 
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo cp -r * /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo dkms add $PACKAGE_NAME/$PACKAGE_VERSION
sudo: dkms : commande introuvable
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo apt install zfs-dkms
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés : 
  dkms libnvpair1linux libuutil1linux libzfs2linux libzpool2linux zfs-zed zfsutils-linux
Paquets suggérés :
  menu nfs-kernel-server samba-common-bin zfs-initramfs | zfs-dracut
Paquets recommandés :
  linux-libc-dev
Les NOUVEAUX paquets suivants seront installés :
  dkms libnvpair1linux libuutil1linux libzfs2linux libzpool2linux zfs-dkms zfs-zed zfsutils-linux
0 mis à jour, 8 nouvellement installés, 0 à enlever et 11 non mis à jour.
Il est nécessaire de prendre 3375 ko dans les archives.
Après cette opération, 19,4 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] O
Réception de :1 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 dkms all 2.7.1-4ubuntu2.1 [66,7 kB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 libnvpair1linux amd64 0.8.1-1ubuntu14.3 [46,8 kB]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 libuutil1linux amd64 0.8.1-1ubuntu14.3 [40,2 kB]
Réception de :4 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 libzfs2linux amd64 0.8.1-1ubuntu14.3 [195 kB]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 libzpool2linux amd64 0.8.1-1ubuntu14.3 [775 kB]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu eoan-updates/universe amd64 zfs-dkms all 0.8.1-1ubuntu14.3 [1850 kB]
Réception de :7 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 zfsutils-linux amd64 0.8.1-1ubuntu14.3 [343 kB]
Réception de :8 http://fr.archive.ubuntu.com/ubuntu eoan-updates/main amd64 zfs-zed amd64 0.8.1-1ubuntu14.3 [58,1 kB]
3375 ko réceptionnés en 3s (1327 ko/s)
Préconfiguration des paquets...
Sélection du paquet dkms précédemment désélectionné.
(Lecture de la base de données... 351183 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../0-dkms_2.7.1-4ubuntu2.1_all.deb ...
Dépaquetage de dkms (2.7.1-4ubuntu2.1) ...
Sélection du paquet libnvpair1linux précédemment désélectionné.
Préparation du dépaquetage de .../1-libnvpair1linux_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de libnvpair1linux (0.8.1-1ubuntu14.3) ...
Sélection du paquet libuutil1linux précédemment désélectionné.
Préparation du dépaquetage de .../2-libuutil1linux_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de libuutil1linux (0.8.1-1ubuntu14.3) ...
Sélection du paquet libzfs2linux précédemment désélectionné.
Préparation du dépaquetage de .../3-libzfs2linux_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de libzfs2linux (0.8.1-1ubuntu14.3) ...
Sélection du paquet libzpool2linux précédemment désélectionné.
Préparation du dépaquetage de .../4-libzpool2linux_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de libzpool2linux (0.8.1-1ubuntu14.3) ...
Sélection du paquet zfs-dkms précédemment désélectionné.
Préparation du dépaquetage de .../5-zfs-dkms_0.8.1-1ubuntu14.3_all.deb ...
Dépaquetage de zfs-dkms (0.8.1-1ubuntu14.3) ...
Sélection du paquet zfsutils-linux précédemment désélectionné.
Préparation du dépaquetage de .../6-zfsutils-linux_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de zfsutils-linux (0.8.1-1ubuntu14.3) ...
Sélection du paquet zfs-zed précédemment désélectionné.
Préparation du dépaquetage de .../7-zfs-zed_0.8.1-1ubuntu14.3_amd64.deb ...
Dépaquetage de zfs-zed (0.8.1-1ubuntu14.3) ...
Paramétrage de libuutil1linux (0.8.1-1ubuntu14.3) ...
Paramétrage de dkms (2.7.1-4ubuntu2.1) ...
Paramétrage de zfs-dkms (0.8.1-1ubuntu14.3) ...
Loading new zfs-0.8.1 DKMS files...
Building for 5.3.0-26-generic
Building initial module for 5.3.0-26-generic
Can't load /var/lib/shim-signed/mok/.rnd into RNG
139718057120960:error:2406F079:random number generator:RAND_load_file:Cannot open file:../crypto/rand
/randfile.c:98:Filename=/var/lib/shim-signed/mok/.rnd
Generating a RSA private key
..+++++
..........................+++++
writing new private key to '/var/lib/shim-signed/mok/MOK.priv'
-----
Secure Boot not enabled on this system.
Done.

zavl.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

znvpair.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

zunicode.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

zcommon.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

zfs.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

icp.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

zlua.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

spl.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

depmod....

DKMS: install completed.
Paramétrage de libnvpair1linux (0.8.1-1ubuntu14.3) ...
Paramétrage de libzfs2linux (0.8.1-1ubuntu14.3) ...
Paramétrage de libzpool2linux (0.8.1-1ubuntu14.3) ...
Paramétrage de zfsutils-linux (0.8.1-1ubuntu14.3) ...
Created symlink /etc/systemd/system/zfs-import.target.wants/zfs-import-cache.service → /lib/systemd/s
ystem/zfs-import-cache.service.
Created symlink /etc/systemd/system/zfs.target.wants/zfs-import.target → /lib/systemd/system/zfs-impo
rt.target.
Created symlink /etc/systemd/system/zfs-mount.service.wants/zfs-load-module.service → /lib/systemd/sy
stem/zfs-load-module.service.
Created symlink /etc/systemd/system/zfs.target.wants/zfs-load-module.service → /lib/systemd/system/zf
s-load-module.service.
Created symlink /etc/systemd/system/zfs.target.wants/zfs-mount.service → /lib/systemd/system/zfs-moun
t.service.
Created symlink /etc/systemd/system/zfs.target.wants/zfs-share.service → /lib/systemd/system/zfs-shar
e.service.
Created symlink /etc/systemd/system/multi-user.target.wants/zfs.target → /lib/systemd/system/zfs.targ
et.
zfs-import-scan.service is a disabled or a static unit, not starting it.
Paramétrage de zfs-zed (0.8.1-1ubuntu14.3) ...
Created symlink /etc/systemd/system/zed.service → /lib/systemd/system/zfs-zed.service.
Created symlink /etc/systemd/system/zfs.target.wants/zfs-zed.service → /lib/systemd/system/zfs-zed.se
rvice.
Traitement des actions différées (« triggers ») pour systemd (242-7ubuntu3.2pop1~1575565723~19.10~6a5
852b) ...
Traitement des actions différées (« triggers ») pour man-db (2.8.7-3) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.30-0ubuntu2) ...
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ source dkms.conf
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo mkdir /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
mkdir: impossible de créer le répertoire «/usr/src/rtlwifi-new-0.6»: Le fichier existe
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo cp -r * /usr/src/$PACKAGE_NAME-$PACKAGE_VERSION
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo dkms add $PACKAGE_NAME/$PACKAGE_VERSION

Creating symlink /var/lib/dkms/rtlwifi-new/0.6/source ->
                 /usr/src/rtlwifi-new-0.6

DKMS: add completed.
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ sudo dkms autoinstall $PACKAGE_NAME/$PACKAGE_VERSION

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....(bad exit status: 2)
make -j8 KERNELRELEASE=5.3.0-26-generic -C /lib/modules/5.3.0-26-generic/build M=/var/lib/dkms/rtlwifi-new/0.6/build............
Signing module:
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/phydm_mod.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/halmac.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/btcoexist.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192c-common.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192ce.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8723de.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtlwifi.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8822be.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8723be.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl_pci.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8723ae.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8821ae.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8723-common.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192se.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192cu.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl_usb.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8188ee.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192ee.ko
 - /var/lib/dkms/rtlwifi-new/0.6/5.3.0-26-generic/x86_64/module/rtl8192de.ko
Secure Boot not enabled on this system.
cleaning build area...(bad exit status: 2)

DKMS: build completed.

rtl_pci.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl_usb.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtlwifi.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

btcoexist.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

halmac.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

phydm_mod.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8188ee.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192c-common.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192ce.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192cu.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192de.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192ee.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8192se.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8723ae.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8723be.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8723de.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8723-common.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8821ae.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

rtl8822be.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.3.0-26-generic/updates/dkms/

depmod...

DKMS: install completed.
david@david-HP-Pavilion-Laptop:~/rtlwifi_new$ 

Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#35 Le 13/01/2020, à 21:17

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Alors je n'ai pas vu le message #33 et j'ai installé un peu au pif un truc qui a installé dkms.
Au final j'ai le wifi !!

C'est cool.

Je nettoie un peu et ça roule


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#36 Le 13/01/2020, à 21:34

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Major Grubert a écrit :

Au final j'ai le wifi !!

Et pour le Bluetooth ?

_ _ _

@Nico

Salut et merci pour ton intervention et tes explications. smile


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#37 Le 14/01/2020, à 06:10

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Toujours pas et en plus mon gnome-control-center est planté :
https://forum.ubuntu-fr.org/viewtopic.p … #p22205795


Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#38 Le 14/01/2020, à 14:18

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Tu pourras donner ?

Le 30/12/2019, Naziel a écrit :

Merci xubu, du coup je vais aussi demander le long retour à donner après redémarrage afin qu'il n'y ait pas trop d'infos (à la recherche du firmware rtl8723de notamment)

dmesg

pour recouper avec > Plus de bluetooth depuis la mise à niveau 19.10


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#39 Le 14/01/2020, à 21:35

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

dmesg
[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 5.3.0-26-generic (buildd@lgw01-amd64-013) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #28-Ubuntu SMP Wed Dec 18 05:37:46 UTC 2019 (Ubuntu 5.3.0-26.28-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=07c76bc8-83f0-46be-9099-2fe62f3f8e8f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007420cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007420d000-0x000000007420dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007420e000-0x000000007420efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007420f000-0x000000008bd4dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008bd4e000-0x000000008c09dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008c09e000-0x000000008c88dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008c88e000-0x000000008cf7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008cf7e000-0x000000008cffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008cffe000-0x000000008cffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001eeffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8cffd014  SMBIOS=0x8c0d8000  SMBIOS 3.0=0x8c0d6000  ESRT=0x8c0d3298  MEMATTR=0x7c47d018 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: HP HP Pavilion Laptop/83CD, BIOS F.42 07/04/2018
[    0.000000] tsc: Detected 1800.000 MHz processor
[    0.001433] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001435] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001447] last_pfn = 0x1ef000 max_arch_pfn = 0x400000000
[    0.001453] MTRR default type: write-back
[    0.001454] MTRR fixed ranges enabled:
[    0.001456]   00000-9FFFF write-back
[    0.001457]   A0000-BFFFF uncachable
[    0.001458]   C0000-FFFFF write-protect
[    0.001459] MTRR variable ranges enabled:
[    0.001462]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.001463]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.001464]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.001466]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.001467]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.001468]   5 disabled
[    0.001468]   6 disabled
[    0.001469]   7 disabled
[    0.001470]   8 disabled
[    0.001470]   9 disabled
[    0.002284] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002589] last_pfn = 0x8cfff max_arch_pfn = 0x400000000
[    0.021221] esrt: Reserving ESRT space from 0x000000008c0d3298 to 0x000000008c0d32d0.
[    0.021233] check: Scanning 1 areas for low memory corruption
[    0.021239] Using GB pages for direct mapping
[    0.021242] BRK [0x126001000, 0x126001fff] PGTABLE
[    0.021245] BRK [0x126002000, 0x126002fff] PGTABLE
[    0.021247] BRK [0x126003000, 0x126003fff] PGTABLE
[    0.021294] BRK [0x126004000, 0x126004fff] PGTABLE
[    0.021296] BRK [0x126005000, 0x126005fff] PGTABLE
[    0.021462] BRK [0x126006000, 0x126006fff] PGTABLE
[    0.021491] BRK [0x126007000, 0x126007fff] PGTABLE
[    0.021557] BRK [0x126008000, 0x126008fff] PGTABLE
[    0.021620] BRK [0x126009000, 0x126009fff] PGTABLE
[    0.021713] BRK [0x12600a000, 0x12600afff] PGTABLE
[    0.021797] RAMDISK: [mem 0x324b7000-0x35252fff]
[    0.021810] ACPI: Early table checksum verification disabled
[    0.021814] ACPI: RSDP 0x000000008CFFD014 000024 (v02 HPQOEM)
[    0.021819] ACPI: XSDT 0x000000008CFB4188 00013C (v01 HPQOEM SLIC-MPC 00000000 HP   01000013)
[    0.021827] ACPI: FACP 0x000000008CFDD000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP   00040000)
[    0.021835] ACPI: DSDT 0x000000008CFB8000 021283 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[    0.021839] ACPI: FACS 0x000000008CF59000 000040
[    0.021843] ACPI: UEFI 0x000000008CFFC000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021847] ACPI: UEFI 0x000000008CFFB000 000042 (v01 HPQOEM INSYDE   00000002 HP   00040000)
[    0.021851] ACPI: SSDT 0x000000008CFF3000 007764 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021856] ACPI: MSDM 0x000000008CFF2000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.021860] ACPI: SSDT 0x000000008CFF1000 0004C3 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021864] ACPI: SSDT 0x000000008CFF0000 000046 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.021868] ACPI: TPM2 0x000000008CFEF000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.021872] ACPI: SSDT 0x000000008CFEB000 003247 (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.021876] ACPI: SSDT 0x000000008CFE2000 008832 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021880] ACPI: ASF! 0x000000008CFE1000 0000A5 (v32 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021884] ACPI: ASPT 0x000000008CFE0000 000034 (v07 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021888] ACPI: BOOT 0x000000008CFDF000 000028 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021892] ACPI: DBGP 0x000000008CFDE000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.021896] ACPI: HPET 0x000000008CFDC000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021900] ACPI: APIC 0x000000008CFDB000 0000BC (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.021904] ACPI: MCFG 0x000000008CFDA000 00003C (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021908] ACPI: SSDT 0x000000008CFB7000 000517 (v02 HPQOEM INSYDE   00000000 ACPI 00040000)
[    0.021912] ACPI: SSDT 0x000000008CFB6000 000E24 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021916] ACPI: SSDT 0x000000008CFB5000 0001BC (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021920] ACPI: SSDT 0x000000008CFB3000 00018E (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021924] ACPI: LPIT 0x000000008CFB2000 000094 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.021928] ACPI: WSMT 0x000000008CFB1000 000028 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.021932] ACPI: SSDT 0x000000008CFB0000 00029F (v02 HPQOEM INSYDE   00000000 ACPI 00040000)
[    0.021936] ACPI: SSDT 0x000000008CFAF000 000346 (v01 HPQOEM INSYDE   00000000 ACPI 00040000)
[    0.021940] ACPI: SSDT 0x000000008CFAB000 003002 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021944] ACPI: SSDT 0x000000008CFAA000 00051E (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021948] ACPI: DBGP 0x000000008CFA9000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.021952] ACPI: DBG2 0x000000008CFA8000 000054 (v00 HPQOEM INSYDE   00000002 HP   00040000)
[    0.021956] ACPI: SSDT 0x000000008CFA6000 0010B0 (v02 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.021960] ACPI: SSDT 0x000000008CFA5000 000EDE (v02 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.021964] ACPI: DMAR 0x000000008CFA4000 0000A8 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021968] ACPI: NHLT 0x000000008CFA3000 00002D (v00 HPQOEM INSYDE   00000002 HP   00040000)
[    0.021972] ACPI: FPDT 0x000000008CFA2000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.021976] ACPI: BGRT 0x000000008CFA1000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.021987] ACPI: Local APIC address 0xfee00000
[    0.022219] No NUMA configuration found
[    0.022220] Faking a node at [mem 0x0000000000000000-0x00000001eeffffff]
[    0.022237] NODE_DATA(0) allocated [mem 0x1eefd5000-0x1eeffffff]
[    0.022570] Zone ranges:
[    0.022572]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.022573]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.022575]   Normal   [mem 0x0000000100000000-0x00000001eeffffff]
[    0.022576]   Device   empty
[    0.022578] Movable zone start for each node
[    0.022583] Early memory node ranges
[    0.022584]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.022585]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.022586]   node   0: [mem 0x0000000000100000-0x000000007420cfff]
[    0.022588]   node   0: [mem 0x000000007420f000-0x000000008bd4dfff]
[    0.022589]   node   0: [mem 0x000000008cffe000-0x000000008cffefff]
[    0.022590]   node   0: [mem 0x0000000100000000-0x00000001eeffffff]
[    0.022793] Zeroed struct page in unavailable ranges: 17175 pages
[    0.022795] Initmem setup node 0 [mem 0x0000000000001000-0x00000001eeffffff]
[    0.022797] On node 0 totalpages: 1551593
[    0.022798]   DMA zone: 64 pages used for memmap
[    0.022799]   DMA zone: 22 pages reserved
[    0.022800]   DMA zone: 3996 pages, LIFO batch:0
[    0.022889]   DMA32 zone: 8886 pages used for memmap
[    0.022891]   DMA32 zone: 568653 pages, LIFO batch:63
[    0.039381]   Normal zone: 15296 pages used for memmap
[    0.039382]   Normal zone: 978944 pages, LIFO batch:63
[    0.059232] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.059393] ACPI: PM-Timer IO Port: 0x1808
[    0.059395] ACPI: Local APIC address 0xfee00000
[    0.059405] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.059406] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.059407] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.059408] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.059409] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.059410] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.059411] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.059412] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.059440] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.059443] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.059445] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.059447] ACPI: IRQ0 used by override.
[    0.059449] ACPI: IRQ9 used by override.
[    0.059451] Using ACPI (MADT) for SMP configuration information
[    0.059453] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.059461] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.059494] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.059497] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.059499] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.059502] PM: Registered nosave memory: [mem 0x7420d000-0x7420dfff]
[    0.059502] PM: Registered nosave memory: [mem 0x7420e000-0x7420efff]
[    0.059505] PM: Registered nosave memory: [mem 0x8bd4e000-0x8c09dfff]
[    0.059506] PM: Registered nosave memory: [mem 0x8c09e000-0x8c88dfff]
[    0.059506] PM: Registered nosave memory: [mem 0x8c88e000-0x8cf7dfff]
[    0.059507] PM: Registered nosave memory: [mem 0x8cf7e000-0x8cffdfff]
[    0.059510] PM: Registered nosave memory: [mem 0x8cfff000-0x8fffffff]
[    0.059510] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.059511] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.059512] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.059513] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.059514] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.059514] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.059515] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.059516] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.059517] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.059518] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.059518] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.059519] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.059520] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.059521] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.059522] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.059522] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.059525] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.059526] Booting paravirtualized kernel on bare hardware
[    0.059530] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.059539] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.059855] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.059866] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.059867] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.059928] Built 1 zonelists, mobility grouping on.  Total pages: 1527325
[    0.059929] Policy zone: Normal
[    0.059931] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=07c76bc8-83f0-46be-9099-2fe62f3f8e8f ro quiet splash vt.handoff=7
[    0.060778] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.061150] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.061269] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.067152] Calgary: detecting Calgary via BIOS EBDA area
[    0.067154] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.086331] Memory: 5913652K/6206372K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 292720K reserved, 0K cma-reserved)
[    0.086538] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.086554] Kernel/User page tables isolation: enabled
[    0.086574] ftrace: allocating 43225 entries in 169 pages
[    0.113670] rcu: Hierarchical RCU implementation.
[    0.113672] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.113673] 	Tasks RCU enabled.
[    0.113674] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.113675] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.118575] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.118970] random: crng done (trusting CPU's manufacturer)
[    0.119006] vt handoff: transparent VT on vt#7
[    0.119017] Console: colour dummy device 80x25
[    0.119023] printk: console [tty0] enabled
[    0.119045] ACPI: Core revision 20190703
[    0.119629] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.119700] APIC: Switch to symmetric I/O mode setup
[    0.119702] DMAR: Host address width 39
[    0.119704] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.119712] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.119714] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.119721] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.119722] DMAR: RMRR base: 0x0000008c799000 end: 0x0000008c7b8fff
[    0.119724] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.119726] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.119727] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.119728] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.121377] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.121379] x2apic enabled
[    0.121393] Switched APIC routing to cluster x2apic.
[    0.125309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.143671] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.143677] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000)
[    0.143681] pid_max: default: 32768 minimum: 301
[    0.147565] LSM: Security Framework initializing
[    0.147582] Yama: becoming mindful.
[    0.147643] AppArmor: AppArmor initialized
[    0.147721] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.147739] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.147993] *** VALIDATE proc ***
[    0.148067] *** VALIDATE cgroup1 ***
[    0.148069] *** VALIDATE cgroup2 ***
[    0.148152] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.148190] process: using mwait in idle threads
[    0.148194] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.148195] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.148200] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.148202] Spectre V2 : Mitigation: Full generic retpoline
[    0.148203] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.148204] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.148206] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.148206] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.148208] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.148212] MDS: Mitigation: Clear CPU buffers
[    0.148623] Freeing SMP alternatives memory: 36K
[    0.151806] TSC deadline timer enabled
[    0.151826] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.151995] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.152003] ... version:                4
[    0.152004] ... bit width:              48
[    0.152005] ... generic registers:      4
[    0.152006] ... value mask:             0000ffffffffffff
[    0.152007] ... max period:             00007fffffffffff
[    0.152007] ... fixed-purpose events:   3
[    0.152008] ... event mask:             000000070000000f
[    0.152072] rcu: Hierarchical SRCU implementation.
[    0.153793] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.153912] smp: Bringing up secondary CPUs ...
[    0.154041] x86: Booting SMP configuration:
[    0.154043] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.165287] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.165287]  #5 #6 #7
[    0.168449] smp: Brought up 1 node, 8 CPUs
[    0.168449] smpboot: Max logical packages: 1
[    0.168449] smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
[    0.171997] devtmpfs: initialized
[    0.171997] x86/mm: Memory block size: 128MB
[    0.172627] PM: Registering ACPI NVS region [mem 0x7420d000-0x7420dfff] (4096 bytes)
[    0.172627] PM: Registering ACPI NVS region [mem 0x8c88e000-0x8cf7dfff] (7274496 bytes)
[    0.172627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.172627] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.172627] pinctrl core: initialized pinctrl subsystem
[    0.172627] PM: RTC time: 05:06:50, date: 2020-01-14
[    0.172627] NET: Registered protocol family 16
[    0.172627] audit: initializing netlink subsys (disabled)
[    0.172627] audit: type=2000 audit(1578978410.052:1): state=initialized audit_enabled=0 res=1
[    0.172627] EISA bus registered
[    0.172627] cpuidle: using governor ladder
[    0.172627] cpuidle: using governor menu
[    0.172627] Simple Boot Flag at 0x44 set to 0x1
[    0.172627] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.172627] ACPI: bus type PCI registered
[    0.172627] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.172627] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.172627] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.172627] PCI: Using configuration type 1 for base access
[    0.172627] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.177340] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.177340] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.179816] ACPI: Added _OSI(Module Device)
[    0.179817] ACPI: Added _OSI(Processor Device)
[    0.179818] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.179819] ACPI: Added _OSI(Processor Aggregator Device)
[    0.179821] ACPI: Added _OSI(Linux-Dell-Video)
[    0.179822] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.179823] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.260446] ACPI: 16 ACPI AML tables successfully acquired and loaded
[    0.266194] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.272901] ACPI: Dynamic OEM Table Load:
[    0.272927] ACPI: SSDT 0xFFFF9F6C67817000 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.276006] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.278709] ACPI: Dynamic OEM Table Load:
[    0.278724] ACPI: SSDT 0xFFFF9F6C66FC1800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.282997] ACPI: Dynamic OEM Table Load:
[    0.283013] ACPI: SSDT 0xFFFF9F6C66AE6800 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.286796] ACPI: Dynamic OEM Table Load:
[    0.286809] ACPI: SSDT 0xFFFF9F6C66F45E00 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.295923] ACPI: EC: EC started
[    0.295924] ACPI: EC: interrupt blocked
[    0.296656] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.296658] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.296660] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.296661] ACPI: Interpreter enabled
[    0.296750] ACPI: (supports S0 S3 S4 S5)
[    0.296751] ACPI: Using IOAPIC for interrupt routing
[    0.296823] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.299045] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.316590] ACPI: Power Resource [WRST] (on)
[    0.350529] ACPI: Power Resource [FN00] (off)
[    0.350721] ACPI: Power Resource [FN01] (off)
[    0.350915] ACPI: Power Resource [FN02] (off)
[    0.351107] ACPI: Power Resource [FN03] (off)
[    0.351291] ACPI: Power Resource [FN04] (off)
[    0.353627] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.353636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.354035] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.354410] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.354411] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.358242] PCI host bridge to bus 0000:00
[    0.358245] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.358248] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.358249] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.358251] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.358252] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.358254] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.358255] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.358257] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.358258] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.358259] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.358261] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.358262] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.358264] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.358265] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.358266] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.358268] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.358269] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.358271] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.358273] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.358289] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.360222] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.360241] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.360251] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.360257] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.360284] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.361835] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.361856] pci 0000:00:04.0: reg 0x10: [mem 0xb1220000-0xb1227fff 64bit]
[    0.363472] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.363494] pci 0000:00:08.0: reg 0x10: [mem 0xb1232000-0xb1232fff 64bit]
[    0.365081] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.365111] pci 0000:00:14.0: reg 0x10: [mem 0xb1210000-0xb121ffff 64bit]
[    0.365204] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.366890] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.366920] pci 0000:00:14.2: reg 0x10: [mem 0xb1233000-0xb1233fff 64bit]
[    0.368523] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.368556] pci 0000:00:16.0: reg 0x10: [mem 0xb1234000-0xb1234fff 64bit]
[    0.368652] pci 0000:00:16.0: PME# supported from D3hot
[    0.370272] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.370298] pci 0000:00:17.0: reg 0x10: [mem 0xb1230000-0xb1231fff]
[    0.370308] pci 0000:00:17.0: reg 0x14: [mem 0xb1237000-0xb12370ff]
[    0.370318] pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
[    0.370328] pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
[    0.370338] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.370348] pci 0000:00:17.0: reg 0x24: [mem 0xb1235000-0xb12357ff]
[    0.370407] pci 0000:00:17.0: PME# supported from D3hot
[    0.371994] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[    0.372111] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.373734] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.373848] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.375507] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.377192] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.377214] pci 0000:00:1f.2: reg 0x10: [mem 0xb122c000-0xb122ffff]
[    0.378835] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.378871] pci 0000:00:1f.3: reg 0x10: [mem 0xb1228000-0xb122bfff 64bit]
[    0.378912] pci 0000:00:1f.3: reg 0x20: [mem 0xb1200000-0xb120ffff 64bit]
[    0.378979] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.380696] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.380757] pci 0000:00:1f.4: reg 0x10: [mem 0xb1236000-0xb12360ff 64bit]
[    0.380827] pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
[    0.382529] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.382566] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.382599] pci 0000:01:00.0: reg 0x18: [mem 0xb1104000-0xb1104fff 64bit]
[    0.382619] pci 0000:01:00.0: reg 0x20: [mem 0xb1100000-0xb1103fff 64bit]
[    0.382747] pci 0000:01:00.0: supports D1 D2
[    0.382748] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.382924] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.382928] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.382932] pci 0000:00:1c.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.383026] pci 0000:02:00.0: [10ec:d723] type 00 class 0x028000
[    0.383069] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.383108] pci 0000:02:00.0: reg 0x18: [mem 0xb1000000-0xb100ffff 64bit]
[    0.383276] pci 0000:02:00.0: supports D1 D2
[    0.383277] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.383556] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.383560] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.383564] pci 0000:00:1c.5:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.393675] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.393782] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.393885] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.393987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.394088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.394189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.394290] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.394390] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.396166] ACPI: EC: interrupt unblocked
[    0.396189] ACPI: EC: event unblocked
[    0.396203] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.396204] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.396327] SCSI subsystem initialized
[    0.396327] libata version 3.00 loaded.
[    0.396327] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.396327] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.396327] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.396327] vgaarb: loaded
[    0.396327] ACPI: bus type USB registered
[    0.396327] usbcore: registered new interface driver usbfs
[    0.396327] usbcore: registered new interface driver hub
[    0.396327] usbcore: registered new device driver usb
[    0.396327] pps_core: LinuxPPS API ver. 1 registered
[    0.396327] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.396327] PTP clock support registered
[    0.396327] EDAC MC: Ver: 3.0.0
[    0.396327] Registered efivars operations
[    0.396327] PCI: Using ACPI for IRQ routing
[    0.425267] PCI: pci_cache_line_size set to 64 bytes
[    0.425334] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.425335] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.425337] e820: reserve RAM buffer [mem 0x7420d000-0x77ffffff]
[    0.425338] e820: reserve RAM buffer [mem 0x8bd4e000-0x8bffffff]
[    0.425339] e820: reserve RAM buffer [mem 0x8cfff000-0x8fffffff]
[    0.425340] e820: reserve RAM buffer [mem 0x1ef000000-0x1efffffff]
[    0.425478] NetLabel: Initializing
[    0.425479] NetLabel:  domain hash size = 128
[    0.425480] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.425500] NetLabel:  unlabeled traffic allowed by default
[    0.425520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.425520] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.428710] clocksource: Switched to clocksource tsc-early
[    0.445772] VFS: Disk quotas dquot_6.6.0
[    0.445793] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.445828] *** VALIDATE hugetlbfs ***
[    0.445946] AppArmor: AppArmor Filesystem Enabled
[    0.445988] pnp: PnP ACPI init
[    0.446324] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.446326] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.446328] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.446330] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.446332] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.446334] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.446335] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.446342] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.446926] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.446931] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.447244] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.447246] system 00:02: [io  0xfd60-0xfd63] has been reserved
[    0.447248] system 00:02: [io  0xffff] has been reserved
[    0.447250] system 00:02: [io  0xffff] has been reserved
[    0.447251] system 00:02: [io  0xffff] has been reserved
[    0.447253] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.447255] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.447260] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.447441] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.447507] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.447512] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.447575] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.447611] pnp 00:06: Plug and Play ACPI device, IDs SYN3266 PNP0f13 (active)
[    0.454304] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.454306] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.454308] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.454309] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.454311] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.454317] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.455433] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.455435] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.455437] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.455439] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.455440] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.455442] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.455445] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.455446] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
[    0.455449] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
[    0.455450] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.455452] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
[    0.455457] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.456813] pnp: PnP ACPI: found 9 devices
[    0.458692] thermal_sys: Registered thermal governor 'fair_share'
[    0.458693] thermal_sys: Registered thermal governor 'bang_bang'
[    0.458694] thermal_sys: Registered thermal governor 'step_wise'
[    0.458695] thermal_sys: Registered thermal governor 'user_space'
[    0.458695] thermal_sys: Registered thermal governor 'power_allocator'
[    0.463213] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.463267] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.463271] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.463276] pci 0000:00:1c.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.463284] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.463287] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.463291] pci 0000:00:1c.5:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.463301] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.463302] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.463304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.463306] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.463307] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.463308] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.463310] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.463312] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.463313] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.463314] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.463316] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.463318] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.463319] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.463320] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.463322] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.463323] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.463325] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
[    0.463326] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.463328] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.463330] pci_bus 0000:01: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.463331] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.463333] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb10fffff]
[    0.463674] NET: Registered protocol family 2
[    0.463864] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.463930] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.464125] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.464261] TCP: Hash tables configured (established 65536 bind 65536)
[    0.464313] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.464348] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.464473] NET: Registered protocol family 1
[    0.464478] NET: Registered protocol family 44
[    0.464493] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.466070] PCI: CLS 64 bytes, default 64
[    0.466129] Trying to unpack rootfs image as initramfs...
[    0.645305] Freeing initrd memory: 46704K
[    0.675730] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.675732] software IO TLB: mapped [mem 0x8776b000-0x8b76b000] (64MB)
[    0.676132] check: Scanning for low memory corruption every 60 seconds
[    0.679149] Initialise system trusted keyrings
[    0.679163] Key type blacklist registered
[    0.679201] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.681199] zbud: loaded
[    0.681741] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.681962] fuse: init (API version 7.31)
[    0.682117] Platform Keyring initialized
[    0.689671] Key type asymmetric registered
[    0.689672] Asymmetric key parser 'x509' registered
[    0.689683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.689746] io scheduler mq-deadline registered
[    0.690364] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.690749] pcieport 0000:00:1c.5: AER: enabled with IRQ 123
[    0.690839] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.690930] efifb: probing for efifb
[    0.690968] efifb: showing boot graphics
[    0.691915] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    0.691917] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.691917] efifb: scrolling: redraw
[    0.691919] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.691978] fbcon: Deferring console take-over
[    0.691979] fb0: EFI VGA frame buffer device
[    0.691990] intel_idle: MWAIT substates: 0x11142120
[    0.691991] intel_idle: v0.4.1 model 0x8E
[    0.692653] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.692944] ACPI: AC Adapter [ACAD] (on-line)
[    0.693058] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input0
[    0.693068] ACPI: Lid Switch [LID0]
[    0.693145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.693162] ACPI: Power Button [PWRF]
[    0.812325] thermal LNXTHERM:00: registered as thermal_zone0
[    0.812327] ACPI: Thermal Zone [TZ00] (28 C)
[    0.812694] thermal LNXTHERM:01: registered as thermal_zone1
[    0.812696] ACPI: Thermal Zone [TZ01] (30 C)
[    0.812819] thermal LNXTHERM:02: registered as thermal_zone2
[    0.812821] ACPI: Thermal Zone [TZ02] (10 C)
[    0.813174] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.816093] Linux agpgart interface v0.103
[    0.880031] battery: ACPI: Battery Slot [BAT1] (battery present)
[    0.884029] loop: module loaded
[    0.884360] libphy: Fixed MDIO Bus: probed
[    0.884362] tun: Universal TUN/TAP device driver, 1.6
[    0.884443] PPP generic driver version 2.4.2
[    0.884542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.884545] ehci-pci: EHCI PCI platform driver
[    0.884559] ehci-platform: EHCI generic platform driver
[    0.884577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.884579] ohci-pci: OHCI PCI platform driver
[    0.884591] ohci-platform: OHCI generic platform driver
[    0.884601] uhci_hcd: USB Universal Host Controller Interface driver
[    0.884916] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.884931] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.886016] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    0.886022] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.886267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    0.886269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.886270] usb usb1: Product: xHCI Host Controller
[    0.886272] usb usb1: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    0.886273] usb usb1: SerialNumber: 0000:00:14.0
[    0.886458] hub 1-0:1.0: USB hub found
[    0.886477] hub 1-0:1.0: 12 ports detected
[    0.888590] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.888594] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.888598] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.888646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    0.888648] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888650] usb usb2: Product: xHCI Host Controller
[    0.888651] usb usb2: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    0.888652] usb usb2: SerialNumber: 0000:00:14.0
[    0.888816] hub 2-0:1.0: USB hub found
[    0.888828] hub 2-0:1.0: 6 ports detected
[    0.889129] usb: port power management may be unreliable
[    0.890198] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.915700] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.915705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.915955] mousedev: PS/2 mouse device common for all mice
[    0.916258] rtc_cmos 00:03: RTC can wake from S4
[    0.916768] rtc_cmos 00:03: registered as rtc0
[    0.916786] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.916795] i2c /dev entries driver
[    0.916853] device-mapper: uevent: version 1.0.3
[    0.916973] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    0.917000] platform eisa.0: Probing EISA bus 0
[    0.917002] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.917004] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.917006] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.917007] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.917008] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.917010] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.917011] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.917012] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.917014] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.917015] platform eisa.0: EISA: Detected 0 cards
[    0.917019] intel_pstate: Intel P-state driver initializing
[    0.917736] intel_pstate: HWP enabled
[    0.917937] ledtrig-cpu: registered to indicate activity on CPUs
[    0.917940] EFI Variables Facility v0.08 2004-May-17
[    0.927051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.968782] intel_pmc_core INT33A1:00:  initialized
[    0.969003] NET: Registered protocol family 10
[    0.976012] Segment Routing with IPv6
[    0.976030] NET: Registered protocol family 17
[    0.976146] Key type dns_resolver registered
[    0.976887] RAS: Correctable Errors collector initialized.
[    0.976950] microcode: sig=0x806ea, pf=0x80, revision=0xca
[    0.977231] microcode: Microcode Update Driver: v2.2.
[    0.977249] sched_clock: Marking stable (976448504, 774241)->(985623490, -8400745)
[    0.977543] registered taskstats version 1
[    0.977551] Loading compiled-in X.509 certificates
[    0.979189] Loaded X.509 cert 'Build time autogenerated kernel key: a633ebf44975be9861a24233b58eb29a160a1563'
[    0.979229] zswap: loaded using pool lzo/zbud
[    0.985899] Key type big_key registered
[    0.985903] Key type trusted registered
[    0.989288] Key type encrypted registered
[    0.989291] AppArmor: AppArmor sha1 policy hashing enabled
[    0.990496] ima: Allocated hash algorithm: sha1
[    1.167885] No architecture policies found
[    1.167905] evm: Initialising EVM extended attributes:
[    1.167906] evm: security.selinux
[    1.167906] evm: security.SMACK64
[    1.167907] evm: security.SMACK64EXEC
[    1.167907] evm: security.SMACK64TRANSMUTE
[    1.167907] evm: security.SMACK64MMAP
[    1.167907] evm: security.apparmor
[    1.167908] evm: security.ima
[    1.167908] evm: security.capability
[    1.167909] evm: HMAC attrs: 0x1
[    1.168738] PM:   Magic number: 4:612:112
[    1.168971] rtc_cmos 00:03: setting system clock to 2020-01-14T05:06:51 UTC (1578978411)
[    1.169999] Freeing unused decrypted memory: 2040K
[    1.170351] Freeing unused kernel image memory: 2668K
[    1.170412] Write protecting the kernel read-only data: 22528k
[    1.170779] Freeing unused kernel image memory: 2008K
[    1.171009] Freeing unused kernel image memory: 1416K
[    1.178587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.178588] x86/mm: Checking user space page tables
[    1.185927] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.185928] Run /init as init process
[    1.223740] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.256308] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found
[    1.259909] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.260123] ahci 0000:00:17.0: version 3.0
[    1.260336] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x5 impl SATA mode
[    1.260339] ahci 0000:00:17.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst 
[    1.261555] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.263728] scsi host0: ahci
[    1.267799] scsi host1: ahci
[    1.268004] scsi host2: ahci
[    1.268059] ata1: SATA max UDMA/133 abar m2048@0xb1235000 port 0xb1235100 irq 125
[    1.268060] ata2: DUMMY
[    1.268062] ata3: SATA max UDMA/133 abar m2048@0xb1235000 port 0xb1235200 irq 125
[    1.273458] libphy: r8169: probed
[    1.273629] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 80:ce:62:d9:fc:0c, XID 541, IRQ 126
[    1.273631] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.274416] r8169 0000:01:00.0 eno1: renamed from eth0
[    1.372632] usb 1-4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[    1.372633] usb 1-4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[    1.373259] usb 1-4: New USB device found, idVendor=0bda, idProduct=b009, bcdDevice= 2.00
[    1.373260] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.373261] usb 1-4: Product: 802.11n WLAN Adapter
[    1.373262] usb 1-4: Manufacturer: Realtek
[    1.373262] usb 1-4: SerialNumber: 00e04c000001
[    1.499869] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.583776] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.588383] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.589517] ata3.00: ATA-9: SanDisk SD8SN8U-128G-1006, X4120006, max UDMA/133
[    1.589518] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.592066] ata3.00: configured for UDMA/133
[    1.595895] ata1.00: ATA-10: ST1000LM035-1RK172, RSM7, max UDMA/100
[    1.595897] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.602295] ahci 0000:00:17.0: port does not support device sleep
[    1.620816] ata1.00: configured for UDMA/100
[    1.640947] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 RSM7 PQ: 0 ANSI: 5
[    1.641210] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.641211] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.641217] sd 0:0:0:0: [sda] Write Protect is off
[    1.641218] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.641225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.641241] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.641605] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
[    1.641934] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.642128] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.642129] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.642137] sd 2:0:0:0: [sdb] Write Protect is off
[    1.642138] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.642150] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.645261]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[    1.645679] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.660636] usb 1-5: New USB device found, idVendor=05c8, idProduct=03ab, bcdDevice= 1.10
[    1.660637] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.660638] usb 1-5: Product: HP Wide Vision HD Camera
[    1.660639] usb 1-5: Manufacturer: SunplusIT Inc
[    1.687881] tsc: Refined TSC clocksource calibration: 1800.006 MHz
[    1.687888] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22f68897, max_idle_ns: 440795282550 ns
[    1.687953] clocksource: Switched to clocksource tsc
[    1.786640]  sda: sda1 sda2
[    1.787079] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.025243] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4768]
[    2.056065] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1120..]
[    2.056070] psmouse serio1: synaptics: Your touchpad (PNP: SYN3266 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.117291] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00223/0x840300/0x12e800/0x400000, board id: 3384, fw id: 2601547
[    2.155918] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[    2.438816] fbcon: Taking over console
[    2.438867] Console: switching to colour frame buffer device 240x67
[    2.442401] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    2.580079] systemd[1]: Inserted module 'autofs4'
[    2.680780] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.699932] systemd[1]: Detected architecture x86-64.
[    2.701854] systemd[1]: Set hostname to <david-HP-Pavilion-Laptop>.
[    2.702524] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    2.769142] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    2.819955] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.820043] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.820093] systemd[1]: Listening on udev Kernel Socket.
[    2.820600] systemd[1]: Created slice User and Session Slice.
[    2.820608] systemd[1]: Reached target Remote File Systems.
[    2.832900] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[    2.840600] lp: driver loaded but no devices found
[    2.843938] ppdev: user-space parallel port driver
[    3.021517] input: HP Wireless hotkeys as /devices/virtual/input/input5
[    3.036333] hp_accel: laptop model unknown, using default axes configuration
[    3.045646] acpi INT33D6:00: intel-vbtn: created platform device
[    3.045898] intel-vbtn INT33D6:00: failed to read Intel Virtual Button driver
[    3.102467] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.120760] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.120761] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.120762] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.120762] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.120763] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.120763] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.154358] Bluetooth: Core ver 2.22
[    3.154370] NET: Registered protocol family 31
[    3.154371] Bluetooth: HCI device and connection manager initialized
[    3.154376] Bluetooth: HCI socket layer initialized
[    3.154378] Bluetooth: L2CAP socket layer initialized
[    3.154381] Bluetooth: SCO socket layer initialized
[    3.154528] mc: Linux media interface: v0.10
[    3.157530] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.162353] lis3lv02d: 8 bits 3DC sensor found
[    3.164699] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.166413] intel_rapl_common: Found RAPL domain package
[    3.166414] intel_rapl_common: Found RAPL domain dram
[    3.169336] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.174114] videodev: Linux video capture interface: v2.00
[    3.180301] usbcore: registered new interface driver btusb
[    3.180651] cryptd: max_cpu_qlen set to 1000
[    3.184589] Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723

[    3.185571] Bluetooth: hci0: RTL: rom_version status=0 version=2

[    3.185573] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin

[    3.193227] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin

[    3.193569] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266

[    3.248437] systemd-journald[364]: Received request to flush runtime journal from PID 1
[    3.252256] rtlwifi: loading out-of-tree module taints kernel.
[    3.254360] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[    3.269463] AVX2 version of gcm_enc/dec engaged.
[    3.269465] AES CTR mode by8 optimization enabled
[    3.275304] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (05c8:03ab)
[    3.295456] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    3.295458] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[    3.295460] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    3.295461] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    3.295531] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input7
[    3.295619] usbcore: registered new interface driver uvcvideo
[    3.295620] USB Video Class driver (1.1.1)
[    3.311460] intel_rapl_common: Found RAPL domain package
[    3.311462] intel_rapl_common: Found RAPL domain core
[    3.311463] intel_rapl_common: Found RAPL domain uncore
[    3.311465] intel_rapl_common: Found RAPL domain dram
[    3.315760] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[    3.326533] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[    3.326535] fb0: switching to inteldrmfb from EFI VGA
[    3.326616] Console: switching to colour dummy device 80x25
[    3.326647] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.362588] rtl8723de: Using firmware rtlwifi/rtl8723defw.bin
[    3.364702] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    3.364949] rtlwifi: rtlwifi: wireless switch is on
[    3.370038] rtl8723de 0000:02:00.0 wlo1: renamed from wlan0
[    3.379695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.379696] [drm] Driver supports precise vblank timestamp query.
[    3.379801] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.380502] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.386363] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.396590] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    3.403296] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.404150] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.409071] fbcon: i915drmfb (fb0) is primary device
[    3.409134] Console: switching to colour frame buffer device 240x67
[    3.409176] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.421221] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.477371] kvm: disabled by bios
[    3.477513] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.477515] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.477515] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.477516] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.477517] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.477517] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.477518] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.562170] kvm: disabled by bios
[    3.578098] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.578163] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.578247] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.578305] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.578355] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.578409] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.578830] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.613405] kvm: disabled by bios
[    3.685422] kvm: disabled by bios
[    3.733444] kvm: disabled by bios
[    3.781174] kvm: disabled by bios
[    3.825288] kvm: disabled by bios
[    3.852610] hp_wmi: query 0xd returned error 0x5
[    3.852675] input: HP WMI hotkeys as /devices/virtual/input/input6
[    3.885619] kvm: disabled by bios
[    3.975803] Adding 5859324k swap on /dev/sdb6.  Priority:-2 extents:1 across:5859324k SSFS
[    3.997659] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    4.398911] audit: type=1400 audit(1578978414.723:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=921 comm="apparmor_parser"
[    4.399246] audit: type=1400 audit(1578978414.723:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=922 comm="apparmor_parser"
[    4.400256] audit: type=1400 audit(1578978414.727:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=926 comm="apparmor_parser"
[    4.400258] audit: type=1400 audit(1578978414.727:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=926 comm="apparmor_parser"
[    4.400459] audit: type=1400 audit(1578978414.727:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=928 comm="apparmor_parser"
[    4.400462] audit: type=1400 audit(1578978414.727:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=928 comm="apparmor_parser"
[    4.400463] audit: type=1400 audit(1578978414.727:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=928 comm="apparmor_parser"
[    4.400491] audit: type=1400 audit(1578978414.727:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=924 comm="apparmor_parser"
[    4.402436] audit: type=1400 audit(1578978414.727:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=925 comm="apparmor_parser"
[    4.832962] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.832964] Bluetooth: BNEP filters: protocol multicast
[    4.832967] Bluetooth: BNEP socket layer initialized
[    5.223315] Generic Realtek PHY r8169-100:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[    5.336870] r8169 0000:01:00.0 eno1: Link is Down
[    5.367689] Bluetooth: hci0: command 0xfc20 tx timeout
[    9.178593] rfkill: input handler disabled
[    9.511895] wlo1: authenticate with f0:82:61:94:62:40
[    9.521955] wlo1: send auth to f0:82:61:94:62:40 (try 1/3)
[    9.523436] wlo1: authenticated
[    9.527781] wlo1: associate with f0:82:61:94:62:40 (try 1/3)
[    9.531459] wlo1: RX AssocResp from f0:82:61:94:62:40 (capab=0x411 status=0 aid=2)
[    9.643703] wlo1: associated
[   10.568078] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   13.399706] Bluetooth: hci0: RTL: download fw command failed (-110)

[   25.957020] show_signal_msg: 34 callbacks suppressed
[   25.957023] gnome-control-c[2281]: segfault at 3a ip 00007fdf2226ee1e sp 00007fff8a0e8060 error 4 in libgtk-3.so.0.2404.8[7fdf22179000+36e000]
[   25.957029] Code: 85 c0 74 05 48 39 30 74 10 4c 89 e7 e8 1b 8e f1 ff 85 c0 0f 84 b3 00 00 00 48 85 ed 0f 84 ca 00 00 00 e8 55 6c 21 00 48 89 c6 <48> 8b 45 00 48 85 c0 74 05 48 39 30 74 10 48 89 ef e8 ec 8d f1 ff
[   92.542234] gnome-control-c[4207]: segfault at 3a ip 00007f3e6b099e1e sp 00007ffc5b115060 error 4 in libgtk-3.so.0.2404.8[7f3e6afa4000+36e000]
[   92.542240] Code: 85 c0 74 05 48 39 30 74 10 4c 89 e7 e8 1b 8e f1 ff 85 c0 0f 84 b3 00 00 00 48 85 ed 0f 84 ca 00 00 00 e8 55 6c 21 00 48 89 c6 <48> 8b 45 00 48 85 c0 74 05 48 39 30 74 10 48 89 ef e8 ec 8d f1 ff
[  117.268745] gnome-control-c[4240]: segfault at 3a ip 00007f14dc703e1e sp 00007ffef3789f80 error 4 in libgtk-3.so.0.2404.8[7f14dc60e000+36e000]
[  117.268750] Code: 85 c0 74 05 48 39 30 74 10 4c 89 e7 e8 1b 8e f1 ff 85 c0 0f 84 b3 00 00 00 48 85 ed 0f 84 ca 00 00 00 e8 55 6c 21 00 48 89 c6 <48> 8b 45 00 48 85 c0 74 05 48 39 30 74 10 48 89 ef e8 ec 8d f1 ff
[ 2505.516566] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2505.517631] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2505.518663] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2505.519760] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2505.520786] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2505.520789] psmouse serio1: issuing reconnect request
[ 2506.207824] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4768]
[ 2506.237775] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1120..]
[ 2575.967622] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 2575.968688] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2575.981225] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 3324.664255] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 3762.182208] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3762.182216] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3762.192994] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3762.193000] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3764.124053] PM: suspend entry (deep)
[ 3764.129864] Filesystems sync: 0.005 seconds
[ 3764.130136] Freezing user space processes ... (elapsed 0.821 seconds) done.
[ 3764.951610] OOM killer disabled.
[ 3764.951611] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3764.952951] printk: Suspending console(s) (use no_console_suspend to debug)
[ 3764.954334] wlo1: deauthenticating from f0:82:61:94:62:40 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3764.980740] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 3764.980781] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3764.981238] sd 0:0:0:0: [sda] Stopping disk
[ 3764.987511] sd 2:0:0:0: [sdb] Stopping disk
[ 3765.878145] ACPI: EC: interrupt blocked
[ 3765.917597] ACPI: Preparing to enter system sleep state S3
[ 3765.921569] ACPI: EC: event blocked
[ 3765.921570] ACPI: EC: EC stopped
[ 3765.921572] PM: Saving platform NVS memory
[ 3765.921709] Disabling non-boot CPUs ...
[ 3765.923617] smpboot: CPU 1 is now offline
[ 3765.929315] smpboot: CPU 2 is now offline
[ 3765.932460] smpboot: CPU 3 is now offline
[ 3765.934466] IRQ 125: no longer affine to CPU4
[ 3765.935713] smpboot: CPU 4 is now offline
[ 3765.937736] IRQ 123: no longer affine to CPU5
[ 3765.937739] IRQ 129: no longer affine to CPU5
[ 3765.938740] smpboot: CPU 5 is now offline
[ 3765.940840] IRQ 122: no longer affine to CPU6
[ 3765.940848] IRQ 128: no longer affine to CPU6
[ 3765.941850] smpboot: CPU 6 is now offline
[ 3765.944050] IRQ 124: no longer affine to CPU7
[ 3765.945072] smpboot: CPU 7 is now offline
[ 3765.949616] ACPI: Low-level resume complete
[ 3765.949729] ACPI: EC: EC started
[ 3765.949730] PM: Restoring platform NVS memory
[ 3765.953476] Enabling non-boot CPUs ...
[ 3765.953540] x86: Booting SMP configuration:
[ 3765.953541] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3765.956696] microcode: sig=0x806ea, pf=0x80, revision=0x96
[ 3765.959367] microcode: updated to revision 0xca, date = 2019-10-03
[ 3765.959776] CPU1 is up
[ 3765.959803] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 3765.961615] CPU2 is up
[ 3765.961639] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 3765.963466] CPU3 is up
[ 3765.963490] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 3765.963804] microcode: sig=0x806ea, pf=0x80, revision=0xca
[ 3765.964140] CPU4 is up
[ 3765.964168] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 3765.964744] CPU5 is up
[ 3765.964769] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 3765.965356] CPU6 is up
[ 3765.965380] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 3765.965978] CPU7 is up
[ 3765.968670] ACPI: Waking up from system sleep state S3
[ 3765.974009] ACPI: EC: interrupt unblocked
[ 3766.072225] ACPI: EC: event unblocked
[ 3766.072886] sd 0:0:0:0: [sda] Starting disk
[ 3766.072890] sd 2:0:0:0: [sdb] Starting disk
[ 3766.072965] rtlwifi: rtlwifi: wireless switch is on
[ 3766.319876] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 3766.387035] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3766.390692] ata3.00: configured for UDMA/133
[ 3766.400805] ahci 0000:00:17.0: port does not support device sleep
[ 3766.595963] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[ 3767.015004] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4768]
[ 3767.045198] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1120..]
[ 3767.917890] acpi LNXPOWER:00: Turning OFF
[ 3767.918043] OOM killer enabled.
[ 3767.918046] Restarting tasks ... done.
[ 3767.931503] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 3767.934460] Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723

[ 3767.935616] Bluetooth: hci0: RTL: rom_version status=0 version=2

[ 3767.935618] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin

[ 3767.935633] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin

[ 3767.935647] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266

[ 3768.149408] PM: suspend exit
[ 3768.307750] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3768.341229] ata1.00: configured for UDMA/100
[ 3769.694709] Generic Realtek PHY r8169-100:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 3769.804607] r8169 0000:01:00.0 eno1: Link is Down
[ 3770.071510] Bluetooth: hci0: command 0xfc20 tx timeout
[ 3773.814739] wlo1: authenticate with f0:82:61:94:62:40
[ 3773.824774] wlo1: send auth to f0:82:61:94:62:40 (try 1/3)
[ 3773.826568] wlo1: authenticated
[ 3773.827508] wlo1: associate with f0:82:61:94:62:40 (try 1/3)
[ 3773.831175] wlo1: RX AssocResp from f0:82:61:94:62:40 (capab=0x411 status=0 aid=2)
[ 3773.935503] wlo1: associated
[ 3774.842741] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 3778.199830] Bluetooth: hci0: RTL: download fw command failed (-110)

[ 4536.642541] audit: type=1400 audit(1579033561.833:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=7334 comm="apparmor_parser"
[ 4536.852397] audit: type=1400 audit(1579033562.041:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=7333 comm="apparmor_parser"
[ 4537.120225] audit: type=1400 audit(1579033562.309:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=7336 comm="apparmor_parser"
[ 4537.175477] audit: type=1400 audit(1579033562.365:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=7337 comm="apparmor_parser"
[ 4537.432167] audit: type=1400 audit(1579033562.621:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=7339 comm="apparmor_parser"
[ 4537.512332] audit: type=1400 audit(1579033562.701:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7340 comm="apparmor_parser"

Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#40 Le 14/01/2020, à 21:44

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Tu devrais tester le Bluetooth avec le choix d'antenne à 0 > github.com/lwfinger/rtlwifi_new/issues/237#issuecomment-569734499


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#41 Le 15/01/2020, à 09:11

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

J'ai fait un

cat /etc/modprobe.d/rtl8723be.conf

mais il m'a indiqué que je n'avais pas de fichier /etc/modprobe.d/rtl8723be.conf
Je suis allé voir : si, il y en avait un.
Il contenait juste la ligne :

options rtl8723de ant_sel=2

J'ai essayé avec un 1 à la place du 2, reboot, pas de bluetooth visible, puis avec un 0, reboot, pas de bluetooth visible.

J'ai lancé la commande (je ne suis pas à une commande que je ne comprends pas près) :

dmesg | grep -i blue
[    3.229386] Bluetooth: Core ver 2.22
[    3.229410] Bluetooth: HCI device and connection manager initialized
[    3.229416] Bluetooth: HCI socket layer initialized
[    3.229418] Bluetooth: L2CAP socket layer initialized
[    3.229421] Bluetooth: SCO socket layer initialized
[    5.195233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.195235] Bluetooth: BNEP filters: protocol multicast
[    5.195239] Bluetooth: BNEP socket layer initialized
[    5.335967] Bluetooth: hci0: command 0x1001 tx timeout
[   13.395871] Bluetooth: hci0: RTL: HCI_OP_READ_LOCAL_VERSION failed (-110)

Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#42 Le 15/01/2020, à 09:19

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Bonjour,

Dans le lien cité au #40, s3rvant a un pilote RTL8723DE.

Que renvoie :

cat /etc/modprobe.d/rtl8723de.conf

?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#43 Le 15/01/2020, à 09:22

Major Grubert

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

cat /etc/modprobe.d/rtl8723de.conf
options rtl8723de ant_sel=0

Pour en savoir plus sur Gnome Shell.
. HP Pavilion  : Windows / Ubuntu 19.10

Hors ligne

#44 Le 15/01/2020, à 09:27

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Si le Bluetooth ne fonctionne pas avec l'antenne à 0, tu la remets à 2 pour rétablir le wifi.

echo "options rtl8723de ant_sel=2" | sudo tee /etc/modprobe.d/rtl8723de.conf

J'essayais de trouver une solution, pour le Bluetooth, mais je pense qu'il faudra attendre une correction dans le noyau.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#45 Le 15/01/2020, à 09:37

NicoApi73

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Bonjour,

Attention, ce que propose xubu au #44 nécessite de rebooter car seul le fichier de config est modifié (donc il est nécessaire de recharger le module)

Hors ligne

#46 Le 15/01/2020, à 09:39

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Salut Nico.

Tu en penses quoi de la bidouille sur le réglage à 0, pour l'antenne ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#47 Le 15/01/2020, à 09:44

NicoApi73

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

xubu1957 a écrit :

Tu en penses quoi de la bidouille sur le réglage à 0, pour l'antenne ?

C'est une configuration (pas une bidouille smile ). Ca se tente et ça peut expliquer des choses. Je ne sais pas comment fonctionne les chipsets qui gèrent le BT et le WIFI. Par contre le BT est sur une fréquence de 2.4 GHz, similaire à celle du WIFI. Donc ça peut fonctionner...

Hors ligne

#48 Le 15/01/2020, à 09:49

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Pour les pilotes Realtek, Larry Finger porte ses efforts sur la partie wifi, mais il ne semble pas trop s'intéresser au Bluetooth.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#49 Le 15/01/2020, à 10:57

Nuliel

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

Effectivement, tester une antenne puis l'autre est effectivement une bonne chose.
Si j'ai bien suivi, le pilote fonctionne sans passer par dkms, donc il n'a pas été recompilé si le noyau a changé.

cd rtlwifi_new/
make clean
git pull
sudo make install

redémarrer et tester pour voir si cela vient de là.

PS: ant_sel=0 n'est pas utile, c'est la valeur par défaut (le pilote choisit l'antenne)

Hors ligne

#50 Le 15/01/2020, à 11:02

xubu1957

Re : [Résolu avec la 20.04] RTL8723DE Plus de Wifi et de Bluetooth en 19.10

@Naziel

Salut,

Si le choix d'antenne était fixé à 2, pour tester la solution de s3rvant, il ne fallait pas repasser sur 0 ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne