#1 Le 20/08/2019, à 13:56
- Thoutankarton
[résolu] Divers bugs suite à réinstallation 18.04
Salut à tous,
Heureux Linuxien depuis 3 ans, après 3 décennies de Windows (élevé au Dos 2.11), je rencontre quelques difficultés au passage à la 18.04 (précédemment 16.04 , mais j'ai fait un clean install pour la 18.04 après backup de mes fichiers).
(Je vous mets le boot info en dessous dans quelques secondes)
Question 1 : HDD non reconnu au démarrage [résolu]
Le système est installé sur un SSD de 128G, et il y a un HD (interne) de 1To à coté (AKA MonGrosDisque)
Le HDD n'est pas reconnu par le système au démarrage, je suis obligé d'aller le monter 'à la main' dans Dolphin pour que les raccourcis pointant dessus s'activent. Pas si gênant, mais sur mon précédent Kubuntu (16,04), je n'avais pas ce souci. Et puis je voudrais comprendre
Question 2 Sortie son se désactive > grésillements
Un autre truc un peu irritant : depuis que je suis passé en 18.04, après écoute d’un son, au bout de quelques secondes de silence, le haut parleur se met à grésiller. Si l’on joue autre son (même juste en jouant avec le réglage du son système), le grésillement s’arrête… puis reprend quelques secondes après la fin du son joué. Pareil si je mets une vidéo en pause que ce soit sur youtube ou dans VLC. Du coup je suis obligé de couper le son (et de le remettre) à chaque fois.
Un peu gênant mais surtout, sur mon précédent Kubuntu (16,04), je n'avais pas ce souci. Et puis je voudrais comprendre (Bis repetita Placent)
(J’ai pensé à un dispositif qui désactiverait la sortie son pour économiser l’énergie implémenté sur la 18.04 ? )
Question 3 Bureau non cliquable et défilant
Je ne peux pas accéder à mon bureau il y a des icônes, mais je ne peux pas cliquer dessus, et ce qui s’affiche à l’écran ne correspond pas à ce qu’il y a dans le dossier système « Bureau » dans Home/Bureau. Autre particularité, il y a un « ascenceur » sur le côté, comme pour faire défiler le bureau. Qu’est ce qui se passe ?
Question 4
De façon générale, je suis déçu par les performances. En tapant simplement du texte sur Libreoffice, il y a des latences. Alors qu’avec un Quadcore, 8Go Ram et un SSD, je m’attendais à une fusée.
Voili voilà, je veux bien un décryptage de ceux qui savent, j’ai déjà résolu quelques autres soucis avec google, mais je sens que je vais commencer à foutre la bordel si je tripatouille sans savoir ce que je fais.
Merci d’avance, et vive la liberté
Dernière modification par Thoutankarton (Le 21/08/2019, à 14:31)
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#2 Le 20/08/2019, à 14:00
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
thoutankarton@thoutankarton-GB-BXi5-5200:~$ systemd-analyze
Startup finished in 2.315s (firmware) + 5.632s (loader) + 8.664s (kernel) + 8.194s (userspace) = 24.806s
graphical.target reached after 8.149s in userspace
thoutankarton@thoutankarton-GB-BXi5-5200:~$ systemd-analyze blame
3.276s dev-sdb2.device
2.802s NetworkManager-wait-online.service
1.578s mpd.service
1.354s networkd-dispatcher.service
1.275s udisks2.service
1.000s snapd.service
902ms upower.service
838ms ModemManager.service
777ms accounts-daemon.service
771ms keyboard-setup.service
700ms systemd-udev-trigger.service
677ms systemd-rfkill.service
637ms swapfile.swap
619ms NetworkManager.service
585ms systemd-logind.service
526ms bluetooth.service
515ms avahi-daemon.service
457ms apparmor.service
451ms systemd-journald.service
412ms grub-common.service
390ms systemd-udevd.service
359ms rsyslog.service
325ms packagekit.service
310ms apport.service
299ms gpu-manager.service
291ms systemd-resolved.service
280ms systemd-timesyncd.service
279ms systemd-journal-flush.service
274ms thermald.service
246ms wpa_supplicant.service
244ms snapd.seeded.service
210ms systemd-modules-load.service
181ms user@1000.service
146ms polkit.service
138ms plymouth-quit.service
121ms setvtrgb.service
120ms systemd-fsck@dev-disk-by\x2duuid-5675\x2dFEB7.service
103ms alsa-restore.service
89ms systemd-tmpfiles-setup.service
81ms kmod-static-nodes.service
81ms systemd-sysctl.service
77ms sys-kernel-debug.mount
77ms dev-mqueue.mount
74ms systemd-tmpfiles-setup-dev.service
73ms systemd-remount-fs.service
71ms ufw.service
61ms kerneloops.service
57ms pppd-dns.service
52ms dev-hugepages.mount
50ms systemd-user-sessions.service
46ms rtkit-daemon.service
44ms sys-fs-fuse-connections.mount
43ms ureadahead-stop.service
42ms systemd-update-utmp.service
42ms systemd-tmpfiles-clean.service
42ms boot-efi.mount
38ms systemd-random-seed.service
35ms plymouth-start.service
34ms plymouth-read-write.service
28ms console-setup.service
26ms systemd-update-utmp-runlevel.service
25ms sys-kernel-config.mount
20ms sddm.service
3ms snapd.socket
[Boot-Info]
http://paste.ubuntu.com/p/8KqcwrsbKm/
Dernière modification par Thoutankarton (Le 20/08/2019, à 14:10)
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#3 Le 20/08/2019, à 14:03
- xubu1957
Re : [résolu] Divers bugs suite à réinstallation 18.04
Bonjour,
Collage du Boot-Info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid fe42d6f8-e34b-45b0-88e4-32b1560ca8ae root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi
/EFI/Boot/fbx64.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootx64.efi
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 1,953,520,064 1,953,520,002 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sdb2 1,050,624 250,068,991 249,018,368 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 7ddc92ee-c6ea-4988-894f-4f25d83deb94 ext4 MonGrosDisque
/dev/sdb1 5675-FEB7 vfat
/dev/sdb2 5c25a362-194f-4e6e-a18e-17fc32143c6c ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 20 13:57 ata-ST1000LM024_HN-M101MBB_S2ZWJ9EGC03404 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 20 13:57 ata-ST1000LM024_HN-M101MBB_S2ZWJ9EGC03404-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Aug 20 13:57 ata-TS128GMSA370_C486840125 -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 20 13:57 ata-TS128GMSA370_C486840125-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Aug 20 13:57 ata-TS128GMSA370_C486840125-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Aug 20 13:57 wwn-0x50004cf211673832 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 20 13:57 wwn-0x50004cf211673832-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/thoutankarton/MonGrosDisque ext4 (rw,nosuid,nodev,relatime,uhelper=udisks2)
/dev/sdb1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 / ext4 (rw,relatime,errors=remount-ro)
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 5c25a362-194f-4e6e-a18e-17fc32143c6c root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.0.0-25-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
menuentry 'Ubuntu, avec Linux 5.0.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-25-generic-advanced-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
echo 'Chargement de Linux 5.0.0-25-generic…'
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-25-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-25-generic-recovery-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
echo 'Chargement de Linux 5.0.0-25-generic…'
linux /boot/vmlinuz-5.0.0-25-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-25-generic
}
menuentry 'Ubuntu, avec Linux 5.0.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-advanced-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
echo 'Chargement de Linux 5.0.0-23-generic…'
linux /boot/vmlinuz-5.0.0-23-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-23-generic-recovery-5c25a362-194f-4e6e-a18e-17fc32143c6c' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 5c25a362-194f-4e6e-a18e-17fc32143c6c
else
search --no-floppy --fs-uuid --set=root 5c25a362-194f-4e6e-a18e-17fc32143c6c
fi
echo 'Chargement de Linux 5.0.0-23-generic…'
linux /boot/vmlinuz-5.0.0-23-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-23-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=5675-FEB7 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
68.627593994 = 73.688317952 boot/grub/grub.cfg 3
4.634082794 = 4.975808512 boot/vmlinuz-5.0.0-23-generic 1
5.345024109 = 5.739175936 boot/vmlinuz-5.0.0-25-generic 1
4.634082794 = 4.975808512 vmlinuz 1
5.699584961 = 6.119882752 boot/initrd.img-5.0.0-23-generic 1
6.129158020 = 6.581133312 boot/initrd.img-5.0.0-25-generic 5
5.699584961 = 6.119882752 initrd.img 1
5.699584961 = 6.119882752 initrd.img.old 1
ADDITIONAL INFORMATION :
=================== log of boot-info 20190820_1357 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Partition 1 does not start on physical sector boundary.
boot-info is executed in installed-session (Ubuntu 18.04.3 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-5.0.0-25-generic root=UUID=5c25a362-194f-4e6e-a18e-17fc32143c6c ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sdb2:L'OS actuellement utilisé - Ubuntu 18.04.3 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: LABEL="MonGrosDisque" UUID="7ddc92ee-c6ea-4988-894f-4f25d83deb94" TYPE="ext4" PARTUUID="4a80dd8d-01"
/dev/sdb1: UUID="5675-FEB7" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="d90638e7-7269-488b-a5a5-55d2b7a206f8"
/dev/sdb2: UUID="5c25a362-194f-4e6e-a18e-17fc32143c6c" TYPE="ext4" PARTUUID="e638bb2d-a987-4847-8fc6-49a382b5e158"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 1 does not start on physical sector boundary.
Partition 1 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 5 21:02 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars 18 17:11 00_header
-rwxr-xr-x 1 root root 6258 mars 18 17:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars 18 17:11 10_linux
-rwxr-xr-x 1 root root 11298 mars 18 17:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 18 17:11 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 18 17:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 18 17:11 40_custom
-rwxr-xr-x 1 root root 216 mars 18 17:11 41_custom
-rw-r--r-- 1 root root 483 mars 18 17:11 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb2: UUID=5675-FEB7 (sdb1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000A,000B,000C,000D,000E,000F,0010,0011,0012,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,001E,001F,0020,0021,0022,0023,0024,0025,0026
Boot0000* ubuntu HD(1,GPT,d90638e7-7269-488b-a5a5-55d2b7a206f8,0x800,0x100000)/File(EFIUBUNTUSHIMX64.EFI)
Boot0001* Windows Boot Manager HD(1,GPT,d90638e7-7269-488b-a5a5-55d2b7a206f8,0x800,0x100000)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)..BO
Boot0002* ubuntu HD(1,GPT,d90638e7-7269-488b-a5a5-55d2b7a206f8,0x800,0x100000)/File(EFIUBUNTUGRUBX64.EFI)..BO
Boot0003* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0004* UEFI:Removable Device BBS(130,,0x0)
Boot0005* UEFI:Network Device BBS(131,,0x0)
Boot0006* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0007* UEFI:Removable Device BBS(130,,0x0)
Boot0008* UEFI:Network Device BBS(131,,0x0)
Boot0009* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot000A* UEFI:Removable Device BBS(130,,0x0)
Boot000B* UEFI:Network Device BBS(131,,0x0)
Boot000C* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot000D* UEFI:Removable Device BBS(130,,0x0)
Boot000E* UEFI:Network Device BBS(131,,0x0)
Boot000F* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0010* UEFI:Removable Device BBS(130,,0x0)
Boot0011* UEFI:Network Device BBS(131,,0x0)
Boot0012* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0013* UEFI:Removable Device BBS(130,,0x0)
Boot0014* UEFI:Network Device BBS(131,,0x0)
Boot0015* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0016* UEFI:Removable Device BBS(130,,0x0)
Boot0017* UEFI:Network Device BBS(131,,0x0)
Boot0018* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0019* UEFI:Removable Device BBS(130,,0x0)
Boot001A* UEFI:Network Device BBS(131,,0x0)
Boot001B* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot001C* UEFI:Removable Device BBS(130,,0x0)
Boot001D* UEFI:Network Device BBS(131,,0x0)
Boot001E* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot001F* UEFI:Removable Device BBS(130,,0x0)
Boot0020* UEFI:Network Device BBS(131,,0x0)
Boot0021* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0022* UEFI:Removable Device BBS(130,,0x0)
Boot0023* UEFI:Network Device BBS(131,,0x0)
Boot0024* UEFI:CD/DVD Drive BBS(129,,0x0)
Boot0025* UEFI:Removable Device BBS(130,,0x0)
Boot0026* UEFI:Network Device BBS(131,,0x0)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /media/thoutankarton/MonGrosDisque.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sdb : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 63 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000LM024 HN-M:;
1:32.3kB:1000GB:1000GB:ext4::;
BYT;
/dev/sdb:128GB:scsi:512:512:gpt:ATA TS128GMSA370:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:128GB:127GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931,5G
sda1 part ext4 931,5G MonGrosDisque
sdb disk 119,2G
sdb1 part vfat 512M
sdb2 part ext4 118,8G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /media/thoutankarton/MonGrosDisque
sdb 0 0 0 running
sdb1 0 0 0 /boot/efi
sdb2 0 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3961456k,nr_inodes=990364,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=799208k,mode=755)
/dev/sdb2 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=16322)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/sdb1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=799204k,mode=700,uid=1000,gid=1000)
/dev/sda1 on /media/thoutankarton/MonGrosDisque type ext4 (rw,nosuid,nodev,relatime,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 udmabuf uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 b7 fe 75 56 4e 4f 20 4e 41 4d 45 20 20 |..)..uVNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Partition 1 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 781M 1.4M 780M 1% /run
/dev/sdb2 ext4 117G 15G 97G 14% /
tmpfs tmpfs 3.9G 50M 3.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sdb1 vfat 511M 8.6M 503M 2% /boot/efi
tmpfs tmpfs 781M 20K 781M 1% /run/user/1000
/dev/sda1 ext4 917G 719G 152G 83% /media/thoutankarton/MonGrosDisque
=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x4a80dd8d
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 1953520064 1953520002 931.5G 83 Linux
Disk /dev/sdb: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 34416E16-CA74-41F0-874B-C6C1B95348EA
Device Start End Sectors Size Type
/dev/sdb1 2048 1050623 1048576 512M EFI System
/dev/sdb2 1050624 250068991 249018368 118.8G Linux filesystem
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options: sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sdb1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
_ _ _
Fournis les cartes sons :
lspci | grep [Aa]udio ; lsusb | grep [Aa]udio
et :
cat /proc/asound/pcm
ainsi que :
snap list --all
Dernière modification par xubu1957 (Le 20/08/2019, à 14:06)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#4 Le 20/08/2019, à 14:12
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
thoutankarton@thoutankarton-GB-BXi5-5200:~$ lspci | grep [Aa]udio ; lsusb | grep [Aa]udio
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
thoutankarton@thoutankarton-GB-BXi5-5200:~$ cat /proc/asound/pcm
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
00-09: HDMI 3 : HDMI 3 : playback 1
00-10: HDMI 4 : HDMI 4 : playback 1
01-00: ALC283 Analog : ALC283 Analog : playback 1 : capture 1
thoutankarton@thoutankarton-GB-BXi5-5200:~$ snap list --all
Aucun snap installé pour le moment. Essayez « snap install hello-world ».
Merci de te pencher sur mon cas !
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#5 Le 20/08/2019, à 14:26
- xubu1957
Re : [résolu] Divers bugs suite à réinstallation 18.04
Je vois dans la Doc son_problemes#saturation_et_gresillement :
Saturation et grésillement (bis)
si vous lisez un fichier audio avec Audacious (ou autre) vérifier dans les paramètres / options que vous n'avez pas ajouté un effet audio créant la saturation (grésillement)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#6 Le 20/08/2019, à 14:39
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
Salut merci pour ça. mais non je n'ai rien crée comme effet audio, j'arrive tout juste d'un clean install depuis 2 jours (et j'ai pas encore eu le temps de foutre le bordel)
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#7 Le 20/08/2019, à 14:42
- xubu1957
Re : [résolu] Divers bugs suite à réinstallation 18.04
Montre :
lsmod | grep snd
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#8 Le 20/08/2019, à 17:49
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
thoutankarton@thoutankarton-GB-BXi5-5200:~$ lsmod | grep snd
snd_hda_codec_realtek 114688 1
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
ledtrig_audio 16384 2 snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_intel 40960 6
snd_hda_codec 131072 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core 86016 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 102400 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_seq_midi 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 36864 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer 36864 2 snd_seq,snd_pcm
snd 86016 22 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
soundcore 16384 1 snd
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#9 Le 20/08/2019, à 17:57
- xubu1957
Re : [résolu] Divers bugs suite à réinstallation 18.04
Je viens de voir :
E: [alsa-sink-ALC283 Analog] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
dans > Saccades audio lors de la lecture multimédia, mais c'est resté sans solution.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 20/08/2019, à 18:51
- geole
Re : [résolu] Divers bugs suite à réinstallation 18.04
Salut à tous,
Question 1 : HDD non reconnu au démarrage
Le système est installé sur un SSD de 128G, et il y a un HD (interne) de 1To à coté (AKA MonGrosDisque)
Le HDD n'est pas reconnu par le système au démarrage, je suis obligé d'aller le monter 'à la main' dans Dolphin pour que les raccourcis pointant dessus s'activent. Pas si gênant, mais sur mon précédent Kubuntu (16,04), je n'avais pas ce souci. Et puis je voudrais comprendre
Ton disque interne ne se monte pas automatiquement car il n'est pas défini dans le fichier /etc/stab (Tu as du oublié que tu avais fais cette modification en 16.04 d'une façon ou d'une autre.)
Pour le faire en mode graphique, C'est expliqué ici (paragraphe 2.11)
Tu peux utiliser le menu déroulant de la ligne 'identifier comme" pour prendre le choix que tu préfères.
Il est possible que cela résolve ton problème trois puisque tu as évoqué des liens.
Dernière modification par geole (Le 20/08/2019, à 18:57)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#11 Le 21/08/2019, à 04:07
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
Effectivement, c'était enfantin, merci ! J'ai édité le fichier Fstab et rajouté la ligne ad-hoc, Merci !
En revanche les icones du bureau fantaisistes persistent.
Je ne peux rien en faire, c'est comme si elles faisaient partie du fond d'écran.
Et il y a un "ascenceur" qui permet de défiler le bureau vers le haut ou le bas.
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#12 Le 21/08/2019, à 10:55
- geole
Re : [résolu] Divers bugs suite à réinstallation 18.04
Bonjour
Pour le bureau, je ne sais pas répondre. J'ai vu que ton système est installé sur un SSD. Dans un tel contexte, on demande souvent à ne pas "prévisionner" si rapidement la mise en oeuvre du swap et la retarder le plus possible puisque écrire dans un SSD est nettement plus rapide que dans un disque dur. C'est expliqué au paragraphe 3.1.2 de
https://doc.ubuntu-fr.org/swap#ameliore … hange_swap
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf
Pour le bureau tu devrais poster une photo .. https://doc.ubuntu-fr.org/capture_d_ecr … re_d_ecran
Dernière modification par geole (Le 21/08/2019, à 10:59)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#13 Le 21/08/2019, à 14:30
- Thoutankarton
Re : [résolu] Divers bugs suite à réinstallation 18.04
OK, j'avais déjà fait les réglages de swap (5 / 50) qu'on m'avait conseillé dans un précédent post.
Et après avoir bidouillé avec le paramétrage du bureau, j'ai fini par le récupérer fonctionnel (je suppose que les liens vers des dossiers d'un disque non monté avaient du perturber le système...)
Du coup 3 problèmes sur 4 réglés.
Et pour le dernier j'ai fini par recycler une paire de HP BT pour ne plus être emmerdé avec ça.
Donc ==> résolu
Merci la communauté !
[élevé au Dos 2.11]
Heureux Linuxien depuis 4 ans, après 3 décennies de Windows
Hors ligne
#14 Le 21/08/2019, à 14:38
- xubu1957
Re : [résolu] Divers bugs suite à réinstallation 18.04
A l'avenir, ouvre une discussion par problème, c'est la pratique de notre forum.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne