Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/06/2019, à 09:53

Atriaze

Résolu Démarage qui tourne en rond....

Bonjour à vous tous,

Depuis pas mal de temps je suis sur UBUNTU18.04 lts, sans souci, et depuis un petit moment, j'ai un lancement plus que long, et qui tourne en rond, en faite je reste sur la page du logo UBUNTU, et je suis obligé de rebooter, pour arriver à ouvrir UBUNTU.

Mon Ordi est un ACER Aspire v15 Nitro Black Edition.

Ci dessous BOOT-INFO, que je ne sais malheureusement pas interpréter.....

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    78,125,055    78,123,008  83 Linux
/dev/sda2          78,125,056   250,068,991   171,943,936  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048 1,953,523,711 1,953,521,664 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/sda1        90911236-57fd-4514-a5c4-f2ef26e593c2   ext4       
/dev/sda2        896e3fd7-6e83-4e24-bb89-5c3fba58463c   ext4       francois
/dev/sdb1        9422721a-0aa3-4508-ac30-7e1be1a4c8ff   ext4       Data

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun 23 09:37 ata-LITEON_CV1-8B128_KN1280L013623012FCHC -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 09:37 ata-LITEON_CV1-8B128_KN1280L013623012FCHC-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 09:37 ata-LITEON_CV1-8B128_KN1280L013623012FCHC-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Jun 23 09:37 ata-TOSHIBA_MQ01ABD100_96HMWDW9T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 23 09:37 ata-TOSHIBA_MQ01ABD100_96HMWDW9T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Jun 23 09:37 wwn-0x5000039744f06e4d -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 23 09:37 wwn-0x5000039744f06e4d-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda2        /home/francois           ext4       (rw,relatime,data=ordered)
/dev/sdb1        /home/data               ext4       (rw,relatime,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
else
  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-90911236-57fd-4514-a5c4-f2ef26e593c2' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
        linux	/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-52-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
	menuentry 'Ubuntu, avec Linux 4.15.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-52-generic-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Chargement de Linux 4.15.0-52-generic…'
	        linux	/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-52-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-52-generic-recovery-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Chargement de Linux 4.15.0-52-generic…'
	        linux	/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-52-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-recovery-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 /               ext4    errors=remount-ro 0       1
# /home/data was on /dev/sdb1 during installation
UUID=9422721a-0aa3-4508-ac30-7e1be1a4c8ff /home/data      ext4    defaults        0       2
# /home/francois was on /dev/sda2 during installation
UUID=896e3fd7-6e83-4e24-bb89-5c3fba58463c /home/francois  ext4    defaults        0       2
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  12.351371765 = 13.262184448   boot/grub/grub.cfg                             3
   4.221134186 = 4.532408320    boot/grub/i386-pc/core.img                     1
   7.188385010 = 7.718469632    boot/vmlinuz-4.15.0-51-generic                 1
  19.039947510 = 20.443987968   boot/vmlinuz-4.15.0-52-generic                 1
  19.039947510 = 20.443987968   vmlinuz                                        1
   7.188385010 = 7.718469632    vmlinuz.old                                    1
  10.057216644 = 10.798854144   boot/initrd.img-4.15.0-51-generic              2
  19.880855560 = 21.346906112   boot/initrd.img-4.15.0-52-generic              3
  19.880855560 = 21.346906112   initrd.img                                     3
  10.057216644 = 10.798854144   initrd.img.old                                 2


ADDITIONAL INFORMATION :
=================== log of boot-info 20190623_0936 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/sda1: UUID="90911236-57fd-4514-a5c4-f2ef26e593c2" TYPE="ext4" PARTUUID="ea23e62d-01"
/dev/sda2: LABEL="francois" UUID="896e3fd7-6e83-4e24-bb89-5c3fba58463c" TYPE="ext4" PARTUUID="ea23e62d-02"
/dev/sdb1: LABEL="Data" UUID="9422721a-0aa3-4508-ac30-7e1be1a4c8ff" TYPE="ext4" PARTLABEL="Data" PARTUUID="38b2d475-a29f-46a9-8040-e7a5570882d9"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 juin  10 14:57 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars  18 17:11 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 0x000000003AEFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000003AEFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
sda2	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home/francois.
sdb1	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home/data.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: GPT,	no-BIOS_boot,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:128GB:scsi:512:512:msdos:ATA LITEON CV1-8B128:;
1:1049kB:40.0GB:40.0GB:ext4::boot;
2:40.0GB:128GB:88.0GB:ext4::;

BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:1000GB:1000GB:ext4:Data:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs  86,6M
loop1 loop squashfs   140M
loop2 loop squashfs   1,6M
loop3 loop squashfs 202,9M
loop4 loop squashfs    21M
loop5 loop squashfs  12,2M
loop6 loop squashfs   3,3M
sda   disk          119,2G
sda1  part ext4      37,3G
sda2  part ext4        82G francois
sdb   disk          931,5G
sdb1  part ext4     931,5G Data

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /snap/core/4486
loop1    1  1  0         /snap/gnome-3-26-1604/59
loop2    1  1  0         /snap/gnome-calculator/154
loop3    1  1  0         /snap/vlc/1049
loop4    1  1  0         /snap/gnome-logs/25
loop5    1  1  0         /snap/gnome-characters/69
loop6    1  1  0         /snap/gnome-system-monitor/36
sda      0  0  0 running
sda1     0  0  0         /
sda2     0  0  0         /home/francois
sdb      1  0  0 running
sdb1     1  0  0         /home/data


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8121004k,nr_inodes=2030251,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1628620k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=18710)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/vlc_1049.snap on /snap/vlc/1049 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda2 on /home/francois type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /home/data type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/120 type tmpfs (rw,nosuid,nodev,relatime,size=1628616k,mode=700,uid=120,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1628616k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog media0 media1 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvidia0 nvidiactl nvidia-modeset nvidia-uvm nvidia-uvm-tools port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     1.6G  2.0M  1.6G   1% /run
/dev/sda1      ext4       37G   15G   20G  43% /
tmpfs          tmpfs     7.8G     0  7.8G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
/dev/loop0     squashfs   87M   87M     0 100% /snap/core/4486
/dev/loop3     squashfs  203M  203M     0 100% /snap/vlc/1049
/dev/loop1     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/59
/dev/loop2     squashfs  1.7M  1.7M     0 100% /snap/gnome-calculator/154
/dev/loop4     squashfs   21M   21M     0 100% /snap/gnome-logs/25
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/69
/dev/loop6     squashfs  3.4M  3.4M     0 100% /snap/gnome-system-monitor/36
/dev/sda2      ext4       81G   49G   28G  65% /home/francois
/dev/sdb1      ext4      916G  426G  444G  49% /home/data
tmpfs          tmpfs     1.6G   16K  1.6G   1% /run/user/120
tmpfs          tmpfs     1.6G   28K  1.6G   1% /run/user/1000

=================== fdisk -l:
Disk /dev/loop0: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 202.9 MiB, 212713472 bytes, 415456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xea23e62d

Device     Boot    Start       End   Sectors  Size Id Type
/dev/sda1  *        2048  78125055  78123008 37.3G 83 Linux
/dev/sda2       78125056 250068991 171943936   82G 83 Linux


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 15569EB1-6567-41D3-9918-25FBF186F2B9

Device     Start        End    Sectors   Size Type
/dev/sdb1   2048 1953523711 1953521664 931.5G Linux filesystem




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA LITEON CV1-8B128) !


=================== User settings
The settings chosen by the user will not act on the boot.

Merci à vous pour vos conseils et idées

Dernière modification par Atriaze (Le 05/07/2019, à 19:29)

Hors ligne

#2 Le 23/06/2019, à 10:04

xubu1957

Re : Résolu Démarage qui tourne en rond....

Bonjour,

   4.221134186 = 4.532408320    boot/grub/i386-pc/core.img                     1

Tu as installé une version 32 bits ?

_ _ _

Voir post #10, analyse de malbo et solution au #13,  > Problème de démarrage suite à mise à jour. Résolu

Dernière modification par xubu1957 (Le 23/06/2019, à 10:11)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 23/06/2019, à 10:09

Atriaze

Re : Résolu Démarage qui tourne en rond....

euuuuh ben non normalement........

Hors ligne

#4 Le 23/06/2019, à 10:11

Atriaze

Re : Résolu Démarage qui tourne en rond....

Sur la clef d'installation, j'ai bien x86_64

Hors ligne

#5 Le 23/06/2019, à 10:13

xubu1957

Re : Résolu Démarage qui tourne en rond....


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#6 Le 23/06/2019, à 10:15

Atriaze

Re : Résolu Démarage qui tourne en rond....

francois@francois-Aspire-VN7-592G:~$ uname -m 
x86_64
francois@francois-Aspire-VN7-592G:~$ 

Hors ligne

#7 Le 23/06/2019, à 10:18

Atriaze

Re : Résolu Démarage qui tourne en rond....

donc pour moi, bien en x86-64, mais alors pourquoi cette ligne

xubu1957 a écrit :

   4.221134186 = 4.532408320    boot/grub/i386-pc/core.img                     1

Hors ligne

#8 Le 23/06/2019, à 10:27

xubu1957

Re : Résolu Démarage qui tourne en rond....

Il faut attendre des aidants plus expérimentés.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 23/06/2019, à 10:32

Atriaze

Re : Résolu Démarage qui tourne en rond....

Merci à vous xubu1957 smile

Hors ligne

#10 Le 23/06/2019, à 10:43

xubu1957

Re : Résolu Démarage qui tourne en rond....

Quelques lignes plus bas, on voit :

boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)

x86_64 = version 64 bits.

Alors que dans l'exemple indiqué au post #2 :

boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, i686)

i686  = version 32 bits.

J'ai encore beaucoup de progrès à faire. sad


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 23/06/2019, à 10:55

Atriaze

Re : Résolu Démarage qui tourne en rond....

et moi donc, il va vraiment que je me bouge le c.. pour comprendre un peu ce boot info....
C'est quand même vraiment bizarre d'avoir les deux systèmes d'installés......

Hors ligne

#12 Le 04/07/2019, à 22:09

xubu1957

Re : Résolu Démarage qui tourne en rond....

Bonjour,

@aux aidants

Discussion précédente > Résolu Curieux bug avec Paramètres systéme

Spécifications de l'ordi :

Le 24/07/2017, malbo a écrit :

Bonjour,
Je viens d'ajouter ton modèle Aspire v15 Nitro VN7-592G-79SK (*) dans la Liste des portables « Acer »
Le noyau installé est de la famille 4.4.0-x ce qui signifie que tu as la version sans le HWE Stack pour 16.04 et que tu resteras avec un noyau de la famille 4.4.0-x jusqu'à la fin de la vie de Ubuntu 16.04. Tu es sur la branche horizontale "16.04.1 (v4.4)" de ce graphique issu de la doc RollingLTSEnablementStack. Pour moi, c'est la version idéale et il ne convient pas d'installer le HWE stack si tout baigne. Ne change rien à mon avis.

(*) pour mémoire, ce modèle  - visible sur cette page - est équipé d'un processeur Intel Core i7-6700HQ et d'une carte graphique dédiée NVIDIA GTX 960M. On peut voir d'autres détails dans le rapport Bisnext du post #4


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#13 Le 05/07/2019, à 08:38

malbo

Re : Résolu Démarage qui tourne en rond....

Bonjour,
Comme tu as une version 64 bits de Ubuntu 18.04, tu n'es pas victime du bug #1827884 qui affecte la version 32 bits. Toutefois, je te conseille d'appliquer la méthode du lien donné plus haut par xubu1957 (c'est la méthode que je détaille dans ce post)

Dernière modification par malbo (Le 05/07/2019, à 08:43)

Hors ligne

#14 Le 05/07/2019, à 18:38

Atriaze

Re : Résolu Démarage qui tourne en rond....

Bonjour xubu1957, et malbo,

Tout d'abord merci à vous deux.
Je viens d'appliquer la méthode détaillé dans ton post. Je me retrouve bien avec un menu Grub.
Je viens de refaire un boot info et j'ai toujours cette ligne /boot/grub/i386-pc/core.img

Ci-dessous boot info

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    78,125,055    78,123,008  83 Linux
/dev/sda2          78,125,056   250,068,991   171,943,936  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1                 2,048 1,953,523,711 1,953,521,664 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/sda1        90911236-57fd-4514-a5c4-f2ef26e593c2   ext4       
/dev/sda2        896e3fd7-6e83-4e24-bb89-5c3fba58463c   ext4       francois
/dev/sdb1        9422721a-0aa3-4508-ac30-7e1be1a4c8ff   ext4       Data

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jul  5 18:29 ata-LITEON_CV1-8B128_KN1280L013623012FCHC -> ../../sda
lrwxrwxrwx 1 root root 10 Jul  5 18:29 ata-LITEON_CV1-8B128_KN1280L013623012FCHC-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul  5 18:29 ata-LITEON_CV1-8B128_KN1280L013623012FCHC-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Jul  5 18:29 ata-TOSHIBA_MQ01ABD100_96HMWDW9T -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul  5 18:29 ata-TOSHIBA_MQ01ABD100_96HMWDW9T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Jul  5 18:29 wwn-0x5000039744f06e4d -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul  5 18:29 wwn-0x5000039744f06e4d-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda2        /home/francois           ext4       (rw,relatime,data=ordered)
/dev/sdb1        /home/data               ext4       (rw,relatime,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

terminal_input console
terminal_output console
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-90911236-57fd-4514-a5c4-f2ef26e593c2' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
        linux	/boot/vmlinuz-4.15.0-54-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-54-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
	menuentry 'Ubuntu, with Linux 4.15.0-54-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-54-generic-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Loading Linux 4.15.0-54-generic ...'
	        linux	/boot/vmlinuz-4.15.0-54-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-54-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-54-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-54-generic-recovery-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Loading Linux 4.15.0-54-generic ...'
	        linux	/boot/vmlinuz-4.15.0-54-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-54-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-52-generic-advanced-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Loading Linux 4.15.0-52-generic ...'
	        linux	/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-52-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-52-generic-recovery-90911236-57fd-4514-a5c4-f2ef26e593c2' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
		else
		  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
		fi
		echo	'Loading Linux 4.15.0-52-generic ...'
	        linux	/boot/vmlinuz-4.15.0-52-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.15.0-52-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  90911236-57fd-4514-a5c4-f2ef26e593c2
	else
	  search --no-floppy --fs-uuid --set=root 90911236-57fd-4514-a5c4-f2ef26e593c2
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 /               ext4    errors=remount-ro 0       1
# /home/data was on /dev/sdb1 during installation
UUID=9422721a-0aa3-4508-ac30-7e1be1a4c8ff /home/data      ext4    defaults        0       2
# /home/francois was on /dev/sda2 during installation
UUID=896e3fd7-6e83-4e24-bb89-5c3fba58463c /home/francois  ext4    defaults        0       2
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  34.370151520 = 36.904669184   boot/grub/grub.cfg                             3
   4.221134186 = 4.532408320    boot/grub/i386-pc/core.img                     1
  19.039947510 = 20.443987968   boot/vmlinuz-4.15.0-52-generic                 1
   5.289947510 = 5.680037888    boot/vmlinuz-4.15.0-54-generic                 2
   5.289947510 = 5.680037888    vmlinuz                                        2
  19.039947510 = 20.443987968   vmlinuz.old                                    1
  15.959484100 = 17.136365568   boot/initrd.img-4.15.0-52-generic              4
  17.638668060 = 18.939375616   boot/initrd.img-4.15.0-54-generic              5
  17.638668060 = 18.939375616   initrd.img                                     5
  15.959484100 = 17.136365568   initrd.img.old                                 4


ADDITIONAL INFORMATION :
=================== log of boot-info 20190705_1829 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-54-generic root=UUID=90911236-57fd-4514-a5c4-f2ef26e593c2 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/sda1: UUID="90911236-57fd-4514-a5c4-f2ef26e593c2" TYPE="ext4" PARTUUID="ea23e62d-01"
/dev/sda2: LABEL="francois" UUID="896e3fd7-6e83-4e24-bb89-5c3fba58463c" TYPE="ext4" PARTUUID="ea23e62d-02"
/dev/sdb1: LABEL="Data" UUID="9422721a-0aa3-4508-ac30-7e1be1a4c8ff" TYPE="ext4" PARTLABEL="Data" PARTUUID="38b2d475-a29f-46a9-8040-e7a5570882d9"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 juin  10 14:57 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars  18 17:11 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 0x000000003AEFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000003AEFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
sda2	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home/francois.
sdb1	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home/data.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: GPT,	no-BIOS_boot,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:128GB:scsi:512:512:msdos:ATA LITEON CV1-8B128:;
1:1049kB:40.0GB:40.0GB:ext4::boot;
2:40.0GB:128GB:88.0GB:ext4::;

BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:1000GB:1000GB:ext4:Data:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   3,3M
loop1 loop squashfs 202,9M
loop2 loop squashfs   140M
loop3 loop squashfs   1,6M
loop4 loop squashfs  86,6M
loop5 loop squashfs    21M
loop6 loop squashfs  12,2M
sda   disk          119,2G
sda1  part ext4      37,3G
sda2  part ext4        82G francois
sdb   disk          931,5G
sdb1  part ext4     931,5G Data

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /snap/gnome-system-monitor/36
loop1    1  1  0         /snap/vlc/1049
loop2    1  1  0         /snap/gnome-3-26-1604/59
loop3    1  1  0         /snap/gnome-calculator/154
loop4    1  1  0         /snap/core/4486
loop5    1  1  0         /snap/gnome-logs/25
loop6    1  1  0         /snap/gnome-characters/69
sda      0  0  0 running
sda1     0  0  0         /
sda2     0  0  0         /home/francois
sdb      1  0  0 running
sdb1     1  0  0         /home/data


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8121004k,nr_inodes=2030251,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1628620k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=16682)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/vlc_1049.snap on /snap/vlc/1049 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda2 on /home/francois type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /home/data type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/120 type tmpfs (rw,nosuid,nodev,relatime,size=1628616k,mode=700,uid=120,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1628616k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog media0 media1 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvidia0 nvidiactl nvidia-modeset nvidia-uvm nvidia-uvm-tools port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     1.6G  1.9M  1.6G   1% /run
/dev/sda1      ext4       37G   15G   20G  44% /
tmpfs          tmpfs     7.8G     0  7.8G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
/dev/loop0     squashfs  3.4M  3.4M     0 100% /snap/gnome-system-monitor/36
/dev/loop1     squashfs  203M  203M     0 100% /snap/vlc/1049
/dev/loop2     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/59
/dev/loop3     squashfs  1.7M  1.7M     0 100% /snap/gnome-calculator/154
/dev/loop4     squashfs   87M   87M     0 100% /snap/core/4486
/dev/loop5     squashfs   21M   21M     0 100% /snap/gnome-logs/25
/dev/loop6     squashfs   13M   13M     0 100% /snap/gnome-characters/69
/dev/sda2      ext4       81G   55G   23G  71% /home/francois
/dev/sdb1      ext4      916G  426G  444G  50% /home/data
tmpfs          tmpfs     1.6G   16K  1.6G   1% /run/user/120
tmpfs          tmpfs     1.6G   28K  1.6G   1% /run/user/1000

=================== fdisk -l:
Disk /dev/loop0: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 202.9 MiB, 212713472 bytes, 415456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xea23e62d

Device     Boot    Start       End   Sectors  Size Id Type
/dev/sda1  *        2048  78125055  78123008 37.3G 83 Linux
/dev/sda2       78125056 250068991 171943936   82G 83 Linux


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 15569EB1-6567-41D3-9918-25FBF186F2B9

Device     Start        End    Sectors   Size Type
/dev/sdb1   2048 1953523711 1953521664 931.5G Linux filesystem




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA LITEON CV1-8B128) !


=================== User settings
The settings chosen by the user will not act on the boot.

Normal ou pas ???

Hors ligne

#15 Le 05/07/2019, à 19:08

xubu1957

Re : Résolu Démarage qui tourne en rond....

Bonjour,

Dans > linux-france.org/article/sys/chargeurs/ix86/grub/grub-manual-fr.html#Installation

Je viens de lire :

GRUB est accompagné d'images de démarrage, qui sont normalement installées dans le répertoire /usr/share/grub/i386-pc.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#16 Le 05/07/2019, à 19:28

Atriaze

Re : Résolu Démarage qui tourne en rond....

et ben alors je vais mettre ce post en résolu.

Merci xubu1957 de ton intervention, et merci malbo.

Bonne soirée à vous, smile

Hors ligne

#17 Le 05/07/2019, à 19:33

xubu1957

Re : Résolu Démarage qui tourne en rond....

Bonne soirée. wink


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#18 Le 06/07/2019, à 09:34

malbo

Re : Résolu Démarage qui tourne en rond....

Bonjour,
La modif que je t'ai fait faire permet de lancer Grub dans une sorte d'affichage sans échec. Et je peux te garantir que tu peux continuer à utiliser ton Ubuntu avec cette modif sans inconvénient. Il n'empêche qu'il y a peut-être un bug de Ubuntu là-dessous et que cette "solution" n'est qu'un contournement du problème.

Dernière modification par malbo (Le 06/07/2019, à 09:36)

Hors ligne

#19 Le 06/07/2019, à 15:37

Atriaze

Re : Résolu Démarage qui tourne en rond....

Bonjour  malbo,

Je vais continuer comme cela.

Encore merci de tes conseils.

Hors ligne