#26 Le 24/05/2019, à 09:08
- geole
Re : Installation Dual Boot Windows 10 ne démarre plus
sudo blkid. .... /dev/nvme0n1p3: PARTLABEL="Basic data partition" PARTUUID="f843c4dd-a094-446c-8284-49d9baf0ea70" .....
Bonjour.
Il semble que cette partition ait perdu son type de partition qui aurait certainement du être NTFS. Je pense que c'est la partition C: si je me refère au boot-info. Sa taille étant de 121.3 Go
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 1333247 1331200 650M EFI System
/dev/nvme0n1p2 1333248 1595391 262144 128M Microsoft reserved
/dev/nvme0n1p3 1595392 255963135 254367744 121.3G Microsoft basic data
/dev/nvme0n1p4 255963136 272347135 16384000 7.8G Linux swap
/dev/nvme0n1p8 272347136 303067135 30720000 14.7G Linux filesystem
/dev/nvme0n1p9 303067136 460763135 157696000 75.2G Linux filesystem
/dev/nvme0n1p5 460763136 462790655 2027520 990M Windows recovery environment
/dev/nvme0n1p6 462790656 497555455 34764800 16.6G Windows recovery environment
/dev/nvme0n1p7 497557504 500084735 2527232 1.2G Windows recovery environment
Je ne sais pas comment tu as fais pour rétrécir le C: Etait-ce avec l'outil de gestion disque virtuel de windows. Etait-ce avec gparted? Etait-ce avec un autre outil?
Il semble aussi que tu ais supprimé ou reformaté la partition /dev/nvme0n1p4.
Je suppose que tu n'as pas de clé USB d'installation de windows10. Je t'invite donc à en fabriquer une
1) Télécharger l'ISO Windows https://www.microsoft.com/fr-fr/softwar … ndows10ISO
2) Faire la clé en copiant le contenu du fichier ISO dans la partition FAT32 de la clé.
peut-être que cette documentation peut aider https://doc.ubuntu-fr.org/tutoriel/inst … s_boot_usb
et voir ce que cela donne en méthode de réparation
3) au cas où il faudrait réinstaller Voir documentation https://doc.ubuntu-fr.org/comment_insta … dre_ubuntu
Dernière modification par geole (Le 24/05/2019, à 11:10)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#27 Le 24/05/2019, à 10:31
- filby112
Re : Installation Dual Boot Windows 10 ne démarre plus
Bonjour
j'ai réinstallé Ubuntu et le problème de redémarrage sur Windows persiste.
Pour installer Ubuntu à côté de Windows j'ai dû dans le BIOS, changer le mode SATA Operation en AHCI au lieu de RAID.
Lorsque je veux redémarrer Windows, il ne supporte pas le mode AHCI et fonctionne en mode RAID On.
Pour Ubuntu, c’est l’inverse, il refuse d’ouvrir en mode RAID mais fonctionne en mode AHCI.
Tout d’abord l’URL du Booot Info
J’ai renvoyé la commande de Geole dont voici le retour : cat /boot/grub/grub.cfg
cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_BE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
linux /boot/vmlinuz-4.18.0-20-generic root=UUID=f286d5ab-03b3-4f22-94a3-cc3280db2e1e ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.18.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
menuentry 'Ubuntu, avec Linux 4.18.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-20-generic-advanced-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
echo 'Chargement de Linux 4.18.0-20-generic…'
linux /boot/vmlinuz-4.18.0-20-generic root=UUID=f286d5ab-03b3-4f22-94a3-cc3280db2e1e ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.18.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-20-generic-recovery-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
echo 'Chargement de Linux 4.18.0-20-generic…'
linux /boot/vmlinuz-4.18.0-20-generic root=UUID=f286d5ab-03b3-4f22-94a3-cc3280db2e1e ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-20-generic
}
menuentry 'Ubuntu, avec Linux 4.18.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-15-generic-advanced-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
echo 'Chargement de Linux 4.18.0-15-generic…'
linux /boot/vmlinuz-4.18.0-15-generic root=UUID=f286d5ab-03b3-4f22-94a3-cc3280db2e1e ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-15-generic
}
menuentry 'Ubuntu, with Linux 4.18.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.18.0-15-generic-recovery-f286d5ab-03b3-4f22-94a3-cc3280db2e1e' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
else
search --no-floppy --fs-uuid --set=root f286d5ab-03b3-4f22-94a3-cc3280db2e1e
fi
echo 'Chargement de Linux 4.18.0-15-generic…'
linux /boot/vmlinuz-4.18.0-15-generic root=UUID=f286d5ab-03b3-4f22-94a3-cc3280db2e1e ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.18.0-15-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/nvme0n1p1)' --class windows --class os $menuentry_id_option 'osprober-efi-D6F6-C070' {
insmod part_gpt
insmod fat
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root D6F6-C070
else
search --no-floppy --fs-uuid --set=root D6F6-C070
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Et la commande de Ikewedu : sudo blkid
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/nvme0n1p1: LABEL="ESP" UUID="D6F6-C070" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="444af99b-2838-4598-9708-f3bdceadf975"
/dev/nvme0n1p3: LABEL="OS" UUID="42109FAA109FA407" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="f843c4dd-a094-446c-8284-49d9baf0ea70"
/dev/nvme0n1p4: UUID="f286d5ab-03b3-4f22-94a3-cc3280db2e1e" TYPE="ext4" PARTUUID="435dab33-99e8-478b-8173-fd52c85416d7"
/dev/nvme0n1p5: LABEL="WINRETOOLS" UUID="CA24D6D224D6C11D" TYPE="ntfs" PARTUUID="cc16ee37-14a4-434d-9378-6ede0302f73b"
/dev/nvme0n1p6: LABEL="Image" UUID="A644D73544D70749" TYPE="ntfs" PARTUUID="9637facb-886f-4fe6-963c-444d1d0530d4"
/dev/nvme0n1p7: LABEL="DELLSUPPORT" UUID="CE32C53C32C529F3" TYPE="ntfs" PARTUUID="bc9ed4f1-103d-48e9-9075-1d18a7fe2970"
/dev/nvme0n1p8: UUID="709e8620-beed-497e-9c9f-effb7fcc8247" TYPE="ext4" PARTLABEL="/home" PARTUUID="efe855a7-a9fa-4c38-a712-4472ceb8aa18"
/dev/nvme0n1p9: UUID="88cbe968-9553-43b2-9d44-b59d5a9a1e81" TYPE="swap" PARTUUID="889db503-1a92-41aa-a12a-f3ce90c6203b"
/dev/sda2: LABEL="DATA" UUID="82882EDA882ECD0B" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="fa5f0abf-2fc7-4a7a-a3bd-3ff695a8deea"
/dev/nvme0n1: PTUUID="a1e35698-0bde-44b2-a581-4815b3df3db7" PTTYPE="gpt"
/dev/nvme0n1p2: PARTLABEL="Microsoft reserved partition" PARTUUID="44e4a175-98ab-4f73-ab9d-b744d509222b"
/dev/sda1: PARTLABEL="Microsoft reserved partition" PARTUUID="11b0a3c9-010c-4d5f-95d7-04c2c1c69039"
Encore merci pour votre aide
Hors ligne
#28 Le 24/05/2019, à 10:58
- geole
Re : Installation Dual Boot Windows 10 ne démarre plus
Bonjour
j'ai réinstallé Ubuntu et le problème de redémarrage sur Windows persiste.
Pour installer Ubuntu à côté de Windows j'ai dû dans le BIOS, changer le mode SATA Operation en AHCI au lieu de RAID.
Lorsque je veux redémarrer Windows, il ne supporte pas le mode AHCI et fonctionne en mode RAID On.
Pour Ubuntu, c’est l’inverse, il refuse d’ouvrir en mode RAID mais fonctionne en mode AHCI.
Encore merci pour votre aide
Bonjour
Pour le point 1, on t'avait dit que ce n'était pas utile puisque la cause de l'erreur n'était pas encore trouvée.
Pour le point 2, si tu dois encore faire cette manipulation actuellement, c'est que tu n'as pas corrigé en respectant les règles de basculement RAID/AHCI
Lire pour cela le paragraphe 2.1 de https://doc.ubuntu-fr.org/cohabitation_ubuntu_windows
Nota. Il semble que la partition windows est pourtant bien vue
/dev/nvme0n1p3: LABEL="OS" UUID="42109FAA109FA407" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="f843c4dd-a094-446c-8284-49d9baf0ea70"
et qu'elle est bien montée d'après le boot-info
=================== mount:
......
/dev/nvme0n1p3 on /mnt/boot-sav/nvme0n1p3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
Dernière modification par geole (Le 24/05/2019, à 11:09)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#29 Le 25/05/2019, à 07:42
- ikewdu
Re : Installation Dual Boot Windows 10 ne démarre plus
Salut,
Comme c'est un problème de RAID, je ne suis pas compétent. Je passe la main. Bye.
Hors ligne
#30 Le 30/05/2019, à 11:10
- filby112
Re : Installation Dual Boot Windows 10 ne démarre plus
Bonjour,
afin de contourner le problème, j'ai réinstallé Windows en mode AHCI.
Le tout fonctionne correctement en dualboot.
Les deux disques durs sont reconnus.
Mon problème est donc résolu.
Hors ligne