Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/05/2019, à 22:24

kurihana30

Help -Grub rescue- pour dual boot

Bonjour à tous,

en voulant procéder à un dual boot, je crois avoir fait une fausse manipulation mais je ne sais pas laquelle.
Et après avoir installé un second disque dur interne formaté en NTFS simplement pour y mettre un jeu que seul Win reconnaîtra, et en voulant redémarrer mon PC pour voir si j'avais bien tout mis dessus, j'ai créé ensuite une clé USB bootable Win pour mon dual boot, mais mon grub aurait disparu.
Ce n'est pas un problème Win de base sinon je ne viendrais pas vous embêter avec ça, mais je ne sais que faire, j'ai consulté la page "comment réinstallé GRUB en utilsant la première méthode, sans succès; j'ai ensuite installé Boot repair et me voilà donc.
Je précise que je suis sur Linux mint depuis 2011, donc pas ubuntu même, et je suis encore sous une distribution d'il y a deux ans. Enfin je ne pense pas que ce soit problématique.
Et pour mon dual boot, je dois installer Win en premier et tout formater d'abord mais donc impossible pour le moment.
Si vous pouviez m'aider à comprendre le souci et éventuellement m'aider à trouver une solution, merci d'avance. grub rescue

Edit : j'ai consulté plusieurs sujets du même genre, donc je m'excuse pour les doublons, triplés etc... mais même en voulant installer une nouvelle distribution de la Mint, ou Ubuntu peu importe, je modifie dans le BIOS pour booter sur ma clé, ensuite au reboot je lance la sélection pour démarrer avec F8, il me propose bien ma clé usb, puis une fois cliqué dessus, il me sort quand même soit
/boot/grub/x86_64-efi/normal.mod’ not found
Entering rescue mode…
grub rescue>

soit il me remet le grub de base fond noir écriture blanche.

Dernière modification par kurihana30 (Le 17/05/2019, à 00:17)

Hors ligne

#2 Le 17/05/2019, à 05:56

ikewdu

Re : Help -Grub rescue- pour dual boot

Salut,

Parviens-tu , à l'heure actuelle,  à démarrer sur quelque chose ? As-tu tenté de débrancher le second DD ? Quelles sont les références du PC ?

Hors ligne

#3 Le 17/05/2019, à 16:02

malbo

Re : Help -Grub rescue- pour dual boot

Bonjour,
Je colle ci-dessous le Boot-Info dont tu as donné le lien ( http://paste.ubuntu.com/p/4FPVXJhjFG/ ) dans le post #1 :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fat part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Syslinux 4.03 or higher
    Boot sector info:  Syslinux looks at sector 9624788 of /dev/sdb1 for its 
                       second stage. It is very unlikely that Syslinux is 
                       (still) installed. The second stage could not be 
                       found. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/syslinux/syslinux.cfg /EFI/BOOT/bootia32.efi 
                       /EFI/BOOT/grubx64.efi /EFI/microsoft/boot/cdboot.efi 
                       /EFI/microsoft/boot/cdboot_noprompt.efi 
                       /EFI/microsoft/boot/memtest.efi /bootmgr /boot/bcd 
                       /boot/syslinux/ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    39,999,487    39,997,440  83 Linux
/dev/sda2          39,999,488    42,000,383     2,000,896  82 Linux swap / Solaris
/dev/sda3          42,002,430 1,953,523,711 1,911,521,282   5 Extended
/dev/sda5          42,002,432 1,953,523,711 1,911,521,280  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             64    15,728,433    15,728,370   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d7c80057-b094-4575-b2b2-682a9f6a6438   ext4       
/dev/sda2        d981eb56-f054-4ff6-b28f-96cda5d29ac8   swap       
/dev/sda5        ae12ab6c-0074-4491-a11d-815d6f5d44d4   ext4       
/dev/sdb1        2BF3-D9B9                              vfat       MULTISYSTEM

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May 16 23:09 ata-TSSTcorp_CDDVDW_SH_R41368DB157426 -> ../../sr0
lrwxrwxrwx 1 root root  9 May 16 23:15 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598 -> ../../sda
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 May 16 23:15 usb-VendorCo_ProductCode_9207005716265638155-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 16 23:09 usb-VendorCo_ProductCode_9207005716265638155-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 May 16 23:15 wwn-0x50014ee25ad986e2 -> ../../sda
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,errors=remount-ro)
/dev/sda5        /home                    ext4       (rw)
/dev/sdb1        /media/tacchon/MULTISYSTEM vfat       (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
else
  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-37-generic
}
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	echo	'Loading Linux 3.13.0-37-generic ...'
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.13.0-37-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=ae12ab6c-0074-4491-a11d-815d6f5d44d4 /home           ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=d981eb56-f054-4ff6-b28f-96cda5d29ac8 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   6.511474609 = 6.991642624    boot/grub/grub.cfg                             1
   6.512138367 = 6.992355328    boot/grub/i386-pc/core.img                     1
  16.945373535 = 18.194956288   boot/vmlinuz-3.13.0-37-generic                 1
  16.945373535 = 18.194956288   vmlinuz                                        1
   3.199821472 = 3.435782144    boot/initrd.img-3.13.0-37-generic              1
   3.199821472 = 3.435782144    initrd.img                                     1

======================= sdb1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32

prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
label win
MENU LABEL Windows install
KERNEL chain.c32 hd0 1 ntldr=/bootmgr




#MULTISYSTEM_MENU_FIN|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/syslinux/syslinux.cfg                     1
            ?? = ??             boot/syslinux/ldlinux.sys                      1
            ?? = ??             boot/syslinux/chain.c32                        1
            ?? = ??             boot/syslinux/hdt.c32                          1
            ?? = ??             boot/syslinux/ifplop.c32                       1
            ?? = ??             boot/syslinux/menu.c32                         1
            ?? = ??             boot/syslinux/reboot.c32                       1
            ?? = ??             boot/syslinux/vesamenu.c32                     1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  not a COM32/COM32R module
 boot/syslinux/hdt.c32              :  not a COM32/COM32R module
 boot/syslinux/ifplop.c32           :  not a COM32/COM32R module
 boot/syslinux/menu.c32             :  not a COM32/COM32R module
 boot/syslinux/reboot.c32           :  not a COM32/COM32R module
 boot/syslinux/vesamenu.c32         :  not a COM32/COM32R module

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/4127/mounts) leaked on lvs invocation. Parent PID 13433: bash
File descriptor 63 (pipe:[30499]) leaked on lvs invocation. Parent PID 13433: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 20190516_2315 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/4127/mounts) leaked on lvs invocation. Parent PID 5739: /bin/sh
No volume groups found
boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash
GRUB detected inside Windows partition. Rename /media/tacchon/MULTISYSTEM/boot/grub into boot/grub_old

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Linux Mint 17.1 Rebecca CurrentSession:linux
/dev/sdb1:Windows Recovery Environment (loader):Windows:chain

=================== blkid:
/dev/sda1: UUID="d7c80057-b094-4575-b2b2-682a9f6a6438" TYPE="ext4"
/dev/sda2: UUID="d981eb56-f054-4ff6-b28f-96cda5d29ac8" TYPE="swap"
/dev/sda5: UUID="ae12ab6c-0074-4491-a11d-815d6f5d44d4" TYPE="ext4"
/dev/sdb1: LABEL="MULTISYSTEM" UUID="2BF3-D9B9" TYPE="vfat"


2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root    root      4096 nov.  26  2014 grub.d
total 88
-rwxr-xr-x 1 root root  9424 mai   15  2014 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root  7500 mai   16 23:09 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1416 mai   15  2014 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai   15  2014 40_custom
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 mai   15  2014 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /media/tacchon/MULTISYSTEM.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-correctEFI, 	liveusb,	not-mmc, has-os,	64 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-003;
1:1049kB:20.5GB:20.5GB:ext4::boot;
2:20.5GB:21.5GB:1024MB:linux-swap(v1)::;
3:21.5GB:1000GB:979GB:::;
5:21.5GB:1000GB:979GB:ext4::;

BYT;
/dev/sdb:8053MB:scsi:512:512:msdos:VendorCo ProductCode;
1:32.8kB:8053MB:8053MB:fat32::boot, lba;

Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0 has been opened read-only.
Error: /dev/sr0: unrecognised disk label

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ext4    19,1G
sda2  part swap     977M
sda3  part            1K
sda5  part ext4   911,5G
sdb   disk          7,5G
sdb1  part vfat     7,5G MULTISYSTEM
sr0   rom         480,1M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0         [SWAP]
sda3     1  0  0
sda5     1  0  0         /home
sdb      1  0  1 running
sdb1     1  0  1         /media/tacchon/MULTISYSTEM
sr0      1  0  1 running


=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda5 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=tacchon)
/dev/sdb1 on /media/tacchon/MULTISYSTEM type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  ati autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk ecryptfs fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net watchdog zero
ls /dev/mapper:  control
efi files in sdb1/efi: /microsoft/boot/memtest.efi /microsoft/boot/cdboot_noprompt.efi /microsoft/boot/cdboot.efi /BOOT/grubx64.efi /BOOT/bootia32.efi

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 08 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  3e 00 f8 00 40 00 00 00  |........>...@...|
00000020  f2 fe ef 00 e2 3b 00 00  00 00 00 00 02 00 00 00  |.....;..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 b9 d9 f3 2b 6d  75 6c 74 69 73 79 73 74  |..)...+multisyst|
00000050  65 6d 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |emFAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 d4 dc 92 00 66 ba  |.t...F}.f.....f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 8a  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda1      ext4       19G  5.9G   12G  33% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     396M  1.5M  394M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     2.0G  139M  1.8G   8% /run/shm
none           tmpfs     100M   16K  100M   1% /run/user
/dev/sda5      ext4      898G  212G  640G  25% /home
/dev/sdb1      vfat      7.5G  4.6G  3.0G  62% /media/tacchon/MULTISYSTEM

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000249ac

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    39999487    19998720   83  Linux
/dev/sda2        39999488    42000383     1000448   82  Linux swap / Solaris
/dev/sda3        42002430  1953523711   955760641    5  Extended
/dev/sda5        42002432  1953523711   955760640   83  Linux

Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x004f3690

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          64    15728433     7864185    c  W95 FAT32 (LBA)


User choice: Est-ce que sda (msdos) est un disque amovible ? no




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !


=================== User settings
The settings chosen by the user will not act on the boot.




pastebinit  packages needed
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main amd64 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main i386 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
debconf: Impossible d'initialiser l'interface : Dialog
debconf: (La variable TERM n'a pas de valeur, l'interface dialog est donc inutilisable.)
debconf: Utilisation de l'interface Readline en remplacement
debconf: Impossible d'initialiser l'interface : Readline
debconf: (Cette interface a besoin d'un terminal de contrôle.)
debconf: Utilisation de l'interface Teletype en remplacement
dpkg-preconfigure: impossible de réouvrir stdin :
paste2.org ko ()

Je me pose la même question que ikewdu au sujet du "second disque dur interne formaté en NTFS simplement pour y mettre un jeu" parce qu'on ne voit pas ce second disque dur interne dans le Boot-Info. Est-ce que tu confirmes que ce second disque dur interne n'était pas connecté quand tu as fait ce Boot-Info ?

Dernière modification par malbo (Le 17/05/2019, à 16:08)

Hors ligne

#4 Le 17/05/2019, à 16:24

geole

Re : Help -Grub rescue- pour dual boot

kurihana30 a écrit :

Bonjour à tous,

Si vous pouviez m'aider à comprendre le souci et éventuellement m'aider à trouver une solution, merci d'avance. grub rescue
....
Et pour mon dual boot, je dois installer Win en premier et tout formater d'abord mais donc impossible pour le moment.
.

Bonjour

Si cela peut aider.
Je ne connais pas multisystem,  mais il est possible  qu'il ne fonctionne pas très bien lorsqu'on mélange du 64 bits avec du 32 bits et  qu'on veut  l'utiliser pour installer windows

/dev/sdb1:Windows Recovery Environment (loader):Windows:chain
GRUB detected inside Windows partition. Rename /media/tacchon/MULTISYSTEM/boot/grub into boot/grub_old
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main amd64 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main i386 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.

J'ai noté que ton ubuntu fonctionne.

boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)

et surtout, comme tu veux installer windows sur un autre disque (non connecté actuellement)  que SDA, tu n'as pas lieu de toucher à SDA......
L'installeur de windows est suffisamment au point  pour préparer correctement le nouveau disque sans que tu aies besoin d'utiliser d'autres logiciels.
Lors de l'installation de windows, sa structure de boot sera accecessible par le MBR du disque  sur lequel, il sera installé. Le boot-automatique sera toujours sur SDA.
Il te suffira de faire la commande

sudo update-grub 

pour avoir un dual-boot. Attention, cela n'est vrai que si ton installation de windows est faite en mode LEGACY et pas EFI.

Dernière modification par geole (Le 17/05/2019, à 16:26)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#5 Le 17/05/2019, à 19:55

ikewdu

Re : Help -Grub rescue- pour dual boot

Re,

Ce n'est pas un problème Win de base sinon je ne viendrais pas vous embêter avec ça,

Où est-il, ce Windows qui ne pose pas de problème ?

Hors ligne

#6 Le 17/05/2019, à 22:13

kurihana30

Re : Help -Grub rescue- pour dual boot

ikewdu a écrit :

Salut,

Parviens-tu , à l'heure actuelle,  à démarrer sur quelque chose ? As-tu tenté de débrancher le second DD ? Quelles sont les références du PC ?

Bonsoir,

oui je peux redémarrer sur mon disque principal c'est ma Mint justement. Et j'ai débranché le second exprès.
J'ai ressorti la config de mon PC, je l'avais monté en 2011 donc je ne sais pas si ça aide ou si j'ai mal fait à l'époque config

Dernière modification par kurihana30 (Le 17/05/2019, à 22:13)

Hors ligne

#7 Le 17/05/2019, à 22:33

kurihana30

Re : Help -Grub rescue- pour dual boot

Je vous réponds à tous ici.
@ikewdu En fait, je crois avoir fait pas mal de bêtises, cela va faire des années que je n'ai plus trop manipulé de lignes de code, je me suis un peu reposé sur mes lauriers, facile avec une Mint me direz vous.
J'ai voulu sauvegarder d'abord mes données sur un disque dur externe, mais comme je n'en n'avais pas mais avais un interne en sus, j'ai fait un branchement dans la tour, seulement au lieu de le partitionner, j'ai complètement zappé, j'ai mis mes données dessus, tout en l'ayant formaté en NTFS avant, car j'allais y mettre Win ensuite dessus. Seulement je crois avoir oublié les bases, ouais plutôt j'en suis sûre, car quand j'ai voulu vérifier mon second disque, après 2 jours sans y toucher, que j'avais bien mes données dessus, ben disons que ma Mint voyait le disque mais ne voulait pas le monter, normal, vu qu'en NTFS... La noob quoi.
J'ai réussi à re-transvaser mes données sur le second disque donc sur un externe d'un pote, et donc ensuite pour repartir au clair, voulu lancer Win avec une clé bootable. Et là, patatra, grub rescue par ci et par là. Et au démarrage, si je tape F12 il me semble, j'ai l'écran du grub qui me propose seulement Mint en normal et en recovery, puis Memory test. Il me propose pas ma clé.
Et même après avoir été dans le BIOS pour passer ma clé en priority boot, au redémarrage elle me remet mon grub avec les options que je viens de mentionner.
AH et du coup je l'ai toujours pas installé et j'ai débranché le second disque car quoiqu'il arrive je n'arrivais à rien; donc je ne sais plus quoi faire et je ne suis pas une pro de la console.
Et pour la dernière phrase, je n'ai pas à la base un problème Win donc je viens bien sur un fofo Ubuntu, me tapez pas wink

@malbo Et en effet je n'ai pas fait boot info avec le second.

@geole j'ai toujours fait en 64 bits pourtant.
Et pour le reste dont tu me parles, ça irait si seulement la clé bootable se lançait, donc le problème est ailleurs je suppose.

Dernière modification par kurihana30 (Le 17/05/2019, à 23:19)

Hors ligne

#8 Le 18/05/2019, à 07:33

ikewdu

Re : Help -Grub rescue- pour dual boot

Salut,

Refais un boot-info avec le tout... Sinon, on a peu de chances de t'aider.

Hors ligne

#9 Le 18/05/2019, à 15:37

viwoan

Re : Help -Grub rescue- pour dual boot

Bonjour,

Je rencontre un problème similaire. Je suis un peu novice navré. Sur mon pc initialement j'ai installé un dual boot Win 7 et Ubuntu.
Tout fonctionnait bien jusqu'au moment où j'ai pris la decision de faire un upgrade Win10. Je suis malheureusement obligé de conserver Win pour certaines activités pro.
J'ai installé pour ce faire un  disque SSD (hd1) pour la perfomance. Le tout piloté par Grub.
Voici l'ordre des problemes :
- Upgrade Win 10  sur le disque hd0 => Probleme de Boot suite à l'upgrade mais ce n'est pas un probleme à traiter ici
- Suite Lancement de Win via Grub comme d'habitute qui lance l'update du systeme. cette operation a du modifier le grub qui passe en mode rescue
  - J'ai booté depuis une clé Ubuntu pour executer le boot-info ci dessous + sudo update-grub qui ne fonctionne pas de:puis la clé avec le message suivant : /usr/sbin/grub-probe : erreur : impossible d'obtenir le chemin canonique de "/cow"

Je suis un peu paumé. j'ai tenté plusieurs manipulations decrites sur le web notamment les commandes :
Set root= (hd1,msdos5)
set prefix=hd1,msdos5) \boot\grub
insmod normal
mais cela ne fonctionne pas plus.

boot-info : http://paste.ubuntu.com/p/GtMdqKCZVt/

Mille excuses si la reponse  à cette question a deja ete fournie une , deux , trois mais je trouve tout fait un probleme identique au mien.
Je ne fais pas plus confiance à mon diagnostic d'amateur..

D'avance merci de votre aide.

Hors ligne

#10 Le 18/05/2019, à 17:05

ikewdu

Re : Help -Grub rescue- pour dual boot

Salut,

Tu aurais dû créer un autre sujet, mais je te donne tout de même mon avis.

Le rapport boot-info montre qu'aucun Linux n'est trouvé sur ta machine...

1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Je pense que la mise à niveau de Windows a expédié ton Linux aux abonnés absents, ce qui arrive régulièrement dans ce genre de cas (malbo pense que c'est lié à une mauvaise numérotation des partitions... ce qui est possible). On voit sur sdb un énorme espace vide  qui devait, je pense, contenir ton Linux:

/dev/sdb3         567,173,118   976,771,071   409,597,954   5 Extended
/dev/sdb5         971,470,848   976,771,071     5,300,224  82 Linux swap / Solaris

Sur sda, la partition ext4 qui s'y trouve ne semble pas contenir de noyau identifié, mais probablement des données ou un /home :

/dev/sda5         393,523,200   625,141,759   231,618,560  83 Linux
/dev/sda5      ext4      109G   94G  9.0G  92% /mnt/boot-sav/sda5

Bref, il va falloir, je le crains, réinstaller ton Linux.

Dernière modification par ikewdu (Le 18/05/2019, à 17:09)

Hors ligne

#11 Le 18/05/2019, à 18:33

kurihana30

Re : Help -Grub rescue- pour dual boot

ikewdu a écrit :

Salut,

Refais un boot-info avec le tout... Sinon, on a peu de chances de t'aider.

Bonjour,

je viens donc de rebrancher le second disque.
Voici le boot info

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No known boot loader is installed in the MBR of /dev/sdb.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fat part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sdb2: __________________________________________________________________________

    File system:       
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''
mount: unknown filesystem type ''

sdb3: __________________________________________________________________________

    File system:       
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''

sdb4: __________________________________________________________________________

    File system:       
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Syslinux 4.03 or higher
    Boot sector info:  Syslinux looks at sector 9624788 of /dev/sdc1 for its 
                       second stage. It is very unlikely that Syslinux is 
                       (still) installed. The second stage could not be 
                       found. No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/syslinux/syslinux.cfg /EFI/BOOT/bootia32.efi 
                       /EFI/BOOT/grubx64.efi /EFI/microsoft/boot/cdboot.efi 
                       /EFI/microsoft/boot/cdboot_noprompt.efi 
                       /EFI/microsoft/boot/memtest.efi /bootmgr /boot/bcd 
                       /boot/syslinux/ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    39,999,487    39,997,440  83 Linux
/dev/sda2          39,999,488    42,000,383     2,000,896  82 Linux swap / Solaris
/dev/sda3          42,002,430 1,953,523,711 1,911,521,282   5 Extended
/dev/sda5          42,002,432 1,953,523,711 1,911,521,280  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1     ?     6,579,571 1,924,427,647 1,917,848,077  70 DiskSecure Multi-Boot
/dev/sdb2     ? 1,953,251,627 3,771,827,541 1,818,575,915  43 Unknown
/dev/sdb3     ?   225,735,265   225,735,274            10  72 Unknown
/dev/sdb4       2,642,411,520 2,642,463,409        51,890   0 Empty

/dev/sdb1 overlaps with /dev/sdb3
/dev/sdb2 ends after the last sector of /dev/sdb
/dev/sdb2 overlaps with /dev/sdb4
/dev/sdb4 ends after the last sector of /dev/sdb

Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             64    15,728,433    15,728,370   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d7c80057-b094-4575-b2b2-682a9f6a6438   ext4       
/dev/sda2        d981eb56-f054-4ff6-b28f-96cda5d29ac8   swap       
/dev/sda5        ae12ab6c-0074-4491-a11d-815d6f5d44d4   ext4       
/dev/sdc1        2BF3-D9B9                              vfat       MULTISYSTEM

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May 18 19:23 ata-ST1000DM003-1ER162_Z4Y5ZV8Y -> ../../sdb
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-ST1000DM003-1ER162_Z4Y5ZV8Y-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-ST1000DM003-1ER162_Z4Y5ZV8Y-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 May 18 19:19 ata-TSSTcorp_CDDVDW_SH_R41368DB157426 -> ../../sr0
lrwxrwxrwx 1 root root  9 May 18 19:23 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598 -> ../../sda
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 May 18 19:23 usb-VendorCo_ProductCode_9207005716265638155-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 May 18 19:18 usb-VendorCo_ProductCode_9207005716265638155-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 May 18 19:23 wwn-0x5000c5007ad37118 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x5000c5007ad37118-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x5000c5007ad37118-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 May 18 19:23 wwn-0x50014ee25ad986e2 -> ../../sda
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,errors=remount-ro)
/dev/sda5        /home                    ext4       (rw)
/dev/sdc1        /media/tacchon/MULTISYSTEM vfat       (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="menuentry 'Windows Recovery Environment (loader) (on /dev/sdb1)' --class windows --class os  'osprober-chain-2BF3-D9B9' {"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
else
  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="$1"
	if [ "$1" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-37-generic
}
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	echo	'Loading Linux 3.13.0-37-generic ...'
	linux	/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro recovery nomodeset 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-3.13.0-37-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d7c80057-b094-4575-b2b2-682a9f6a6438
	else
	  search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=ae12ab6c-0074-4491-a11d-815d6f5d44d4 /home           ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=d981eb56-f054-4ff6-b28f-96cda5d29ac8 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   8.261577606 = 8.870801408    boot/grub/grub.cfg                             1
  17.040481567 = 18.297077760   boot/grub/i386-pc/core.img                     1
  16.945373535 = 18.194956288   boot/vmlinuz-3.13.0-37-generic                 1
  16.945373535 = 18.194956288   vmlinuz                                        1
   3.199821472 = 3.435782144    boot/initrd.img-3.13.0-37-generic              1
   3.199821472 = 3.435782144    initrd.img                                     1

======================= sdc1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32

prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
label win
MENU LABEL Windows install
KERNEL chain.c32 hd0 1 ntldr=/bootmgr




#MULTISYSTEM_MENU_FIN|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

================= sdc1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/syslinux/syslinux.cfg                     1
            ?? = ??             boot/syslinux/ldlinux.sys                      1
            ?? = ??             boot/syslinux/chain.c32                        1
            ?? = ??             boot/syslinux/hdt.c32                          1
            ?? = ??             boot/syslinux/ifplop.c32                       1
            ?? = ??             boot/syslinux/menu.c32                         1
            ?? = ??             boot/syslinux/reboot.c32                       1
            ?? = ??             boot/syslinux/vesamenu.c32                     1

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  not a COM32/COM32R module
 boot/syslinux/hdt.c32              :  not a COM32/COM32R module
 boot/syslinux/ifplop.c32           :  not a COM32/COM32R module
 boot/syslinux/menu.c32             :  not a COM32/COM32R module
 boot/syslinux/reboot.c32           :  not a COM32/COM32R module
 boot/syslinux/vesamenu.c32         :  not a COM32/COM32R module

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown MBR on /dev/sdb

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  af 6d 70 74 00 00 00 00  |.........mpt....|
00000030  04 00 00 00 00 00 00 00  da 06 47 07 00 00 00 00  |..........G.....|
00000040  f6 00 00 00 01 00 00 00  42 cd 83 0a 39 77 b8 72  |........B...9w.r|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on sdb2

00000000  06 6b 6f 19 f1 e8 3d 12  ed d8 10 81 02 e4 ca ae  |.ko...=.........|
00000010  8f 69 79 77 9a c0 85 41  98 d8 0c db 40 f8 5f fd  |.iyw...A....@._.|
00000020  8f c4 b1 ed c1 e8 35 1f  83 5d e8 ec 4a 82 40 28  |......5..]..J.@(|
00000030  28 30 29 93 fb c4 e9 32  ef fc 79 e1 ed 0f b5 e0  |(0)....2..y.....|
00000040  de 07 81 ff 64 19 53 01  0f de 5f 55 2b 70 37 d5  |....d.S..._U+p7.|
00000050  83 17 84 31 25 55 12 84  bf 8f 87 e2 57 f9 f8 0c  |...1%U......W...|
00000060  a0 48 da d7 74 78 6c 10  5f 54 3e 56 25 aa 12 b0  |.H..txl._T>V%...|
00000070  7a 3a 16 89 3e 56 10 f3  44 af 02 07 a7 fe a5 58  |z:..>V..D......X|
00000080  06 83 55 7e 9e f7 20 30  e9 52 aa ac 7d 4b ed 03  |..U~.. 0.R..}K..|
00000090  7f eb 26 8b d5 d1 e8 f2  8f cb 82 10 fc bf d3 fa  |..&.............|
000000a0  0c a1 4a b0 84 ac be 34  ac 7d 65 cd 54 bc 82 3f  |..J....4.}e.T..?|
000000b0  1e e2 14 96 ea 67 45 62  40 3c 1c 02 34 7e a5 5a  |.....gEb@<..4~.Z|
000000c0  b1 fc fa a0 61 ea a5 2a  26 7b fc f9 74 50 b2 b1  |....a..*&{..tP..|
000000d0  88 fd 50 41 f9 7d f8 36  03 02 80 48 12 ef f6 03  |..PA.}.6...H....|
000000e0  6f a2 80 42 f0 eb ca 87  de 57 f9 2a b6 55 ed be  |o..B.....W.*.U..|
000000f0  9a d1 e6 20 78 7c 3e f1  74 1d 89 00 c5 fe 06 1f  |... x|>.t.......|
00000100  89 14 18 46 2f f8 f2 04  1f 40 60 30 01 f0 b8 0e  |...F/....@`0....|
00000110  17 17 ce bb fa b0 3d eb  f8 ab 37 8a 7e a2 27 ac  |......=...7.~.'.|
00000120  42 19 8a ec 05 17 81 0c  bd 82 e0 59 90 e0 78 20  |B..........Y..x |
00000130  5d 09 5f 1f aa 54 3f 1f  09 1a 07 47 fd 8a 94 29  |]._..T?....G...)|
00000140  fe 33 7f 44 4f 11 83 65  54 25 09 1f 2e f1 7c 2f  |.3.DO..eT%....|/|
00000150  00 f1 2c 7e 0f 05 ff 08  92 d7 d5 0f e0 8c 01 85  |..,~............|
00000160  d0 14 83 e2 e4 0f 1f a9  00 d5 60 c2 37 c1 84 82  |..........`.7...|
00000170  e2 e5 40 a4 00 d5 7e 04  35 74 45 ff ea b5 6a 87  |..@...~.5tE...j.|
00000180  8a 6f 3d 9e c6 61 32 90  44 3f 06 df e1 7f c2 11  |.o=..a2.D?......|
00000190  70 06 7c 10 ff 2c 04 3d  56 3e 1f 02 9c 0f 28 57  |p.|..,.=V>....(W|
000001a0  aa d5 41 13 dd da 44 5f  e1 f8 92 ae 55 53 c0 c3  |..A...D_....US..|
000001b0  e2 e0 0f d0 43 2f 04 38  ab ca ac a3 a1 e0 40 2e  |....C/.8......@.|
000001c0  57 f5 4a 80 e2 8d 2f bb  ba 23 30 e2 3f aa ee 37  |W.J.../..#0.?..7|
000001d0  91 2d c3 ea be 25 8f 95  2b f1 75 fa 85 62 58 33  |.-...%..+.u..bX3|
000001e0  42 f1 2e ab 00 fd c2 f0  80 10 0b 80 cd 55 e1 d0  |B............U..|
000001f0  fe 97 08 c2 58 95 61 7a  b1 d1 7b 4a c7 bf fa d0  |....X.az..{J....|
00000200

Unknown BootLoader on sdb3


Unknown BootLoader on sdb4



=============================== StdErr Messages: ===============================

hexdump: /dev/sdb3: No such file or directory
hexdump: /dev/sdb3: No such file or directory
hexdump: /dev/sdb4: No such file or directory
hexdump: /dev/sdb4: No such file or directory
File descriptor 9 (/proc/16130/mounts) leaked on lvs invocation. Parent PID 25867: bash
File descriptor 63 (pipe:[37955]) leaked on lvs invocation. Parent PID 25867: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 20190518_1923 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/16130/mounts) leaked on lvs invocation. Parent PID 17727: /bin/sh
No volume groups found
boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Linux Mint 17.1 Rebecca CurrentSession:linux
/dev/sdc1:Windows Recovery Environment (loader):Windows:chain

=================== blkid:
/dev/sda1: UUID="d7c80057-b094-4575-b2b2-682a9f6a6438" TYPE="ext4"
/dev/sda2: UUID="d981eb56-f054-4ff6-b28f-96cda5d29ac8" TYPE="swap"
/dev/sda5: UUID="ae12ab6c-0074-4491-a11d-815d6f5d44d4" TYPE="ext4"
/dev/sdc1: LABEL="MULTISYSTEM" UUID="2BF3-D9B9" TYPE="vfat"


2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root    root      4096 nov.  26  2014 grub.d
total 88
-rwxr-xr-x 1 root root  9424 mai   15  2014 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root  7500 mai   18 19:18 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1416 mai   15  2014 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai   15  2014 40_custom
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 mai   15  2014 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="menuentry 'Windows Recovery Environment (loader) (on /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-2BF3-D9B9' {"
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /media/tacchon/MULTISYSTEM.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-correctEFI, 	liveusb,	not-mmc, has-os,	64 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-003;
1:1049kB:20.5GB:20.5GB:ext4::boot;
2:20.5GB:21.5GB:1024MB:linux-swap(v1)::;
3:21.5GB:1000GB:979GB:::;
5:21.5GB:1000GB:979GB:ext4::;

BYT;
/dev/sdb:1000GB:scsi:512:4096:loop:ATA ST1000DM003-1ER1;
1:0.00B:1000GB:1000GB:ntfs::;

BYT;
/dev/sdc:8053MB:scsi:512:512:msdos:VendorCo ProductCode;
1:32.8kB:8053MB:8053MB:fat32::boot, lba;

Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0 has been opened read-only.
Error: /dev/sr0: unrecognised disk label

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ext4    19,1G
sda2  part swap     977M
sda3  part            1K
sda5  part ext4   911,5G
sdb   disk ntfs   931,5G Moko
sdb1  part        811,6G
sdb2  part        346,1G
sdc   disk          7,5G
sdc1  part vfat     7,5G MULTISYSTEM
sr0   rom         480,1M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0         [SWAP]
sda3     1  0  0
sda5     1  0  0         /home
sdb      1  0  0 running
sdb1     1  0  0
sdb2     1  0  0
sdc      1  0  1 running
sdc1     1  0  1         /media/tacchon/MULTISYSTEM
sr0      1  0  1 running


=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda5 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=tacchon)
/dev/sdc1 on /media/tacchon/MULTISYSTEM type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  ati autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk ecryptfs fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sdb2 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net watchdog zero
ls /dev/mapper:  control
efi files in sdc1/efi: /microsoft/boot/memtest.efi /microsoft/boot/cdboot_noprompt.efi /microsoft/boot/cdboot.efi /BOOT/grubx64.efi /BOOT/bootia32.efi

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 08 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  3e 00 f8 00 40 00 00 00  |........>...@...|
00000020  f2 fe ef 00 e2 3b 00 00  00 00 00 00 02 00 00 00  |.....;..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 b9 d9 f3 2b 6d  75 6c 74 69 73 79 73 74  |..)...+multisyst|
00000050  65 6d 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |emFAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 d4 dc 92 00 66 ba  |.t...F}.f.....f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 8a  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda1      ext4       19G  5.8G   12G  33% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     396M  1.5M  394M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     2.0G   65M  1.9G   4% /run/shm
none           tmpfs     100M   16K  100M   1% /run/user
/dev/sda5      ext4      898G  212G  640G  25% /home
/dev/sdc1      vfat      7.5G  4.6G  3.0G  62% /media/tacchon/MULTISYSTEM

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000249ac

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    39999487    19998720   83  Linux
/dev/sda2        39999488    42000383     1000448   82  Linux swap / Solaris
/dev/sda3        42002430  1953523711   955760641    5  Extended
/dev/sda5        42002432  1953523711   955760640   83  Linux

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2052474d

This doesn't look like a partition table
Probably you selected the wrong device.

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   ?     6579571  1924427647   958924038+  70  DiskSecure Multi-Boot
Partition 1 does not start on physical sector boundary.
/dev/sdb2   ?  1953251627  3771827541   909287957+  43  Unknown
Partition 2 does not start on physical sector boundary.
/dev/sdb3   ?   225735265   225735274           5   72  Unknown
Partition 3 does not start on physical sector boundary.
/dev/sdb4      2642411520  2642463409       25945    0  Empty

Partition table entries are not in disk order

Disk /dev/sdc: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x004f3690

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          64    15728433     7864185    c  W95 FAT32 (LBA)


User choice: Est-ce que sda (msdos) est un disque amovible ? no




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !


=================== User settings
The settings chosen by the user will not act on the boot.

Hors ligne

#12 Le 18/05/2019, à 23:02

viwoan

Re : Help -Grub rescue- pour dual boot

Hello, c'est bien ce que je craignais.

Merci pour le support !

ikewdu a écrit :

Salut,

Tu aurais dû créer un autre sujet, mais je te donne tout de même mon avis.

Le rapport boot-info montre qu'aucun Linux n'est trouvé sur ta machine...

1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Je pense que la mise à niveau de Windows a expédié ton Linux aux abonnés absents, ce qui arrive régulièrement dans ce genre de cas (malbo pense que c'est lié à une mauvaise numérotation des partitions... ce qui est possible). On voit sur sdb un énorme espace vide  qui devait, je pense, contenir ton Linux:

/dev/sdb3         567,173,118   976,771,071   409,597,954   5 Extended
/dev/sdb5         971,470,848   976,771,071     5,300,224  82 Linux swap / Solaris

Sur sda, la partition ext4 qui s'y trouve ne semble pas contenir de noyau identifié, mais probablement des données ou un /home :

/dev/sda5         393,523,200   625,141,759   231,618,560  83 Linux
/dev/sda5      ext4      109G   94G  9.0G  92% /mnt/boot-sav/sda5

Bref, il va falloir, je le crains, réinstaller ton Linux.

Hors ligne

#13 Le 18/05/2019, à 23:32

kurihana30

Re : Help -Grub rescue- pour dual boot

Et en plus, j'ai beau sélectionner la clé USB dans le BIOS pour la mettre en priorité, mais à l'allumage, il a rebasculé sur le disque dur. Même avec la touche F8.

Hors ligne

#14 Le 19/05/2019, à 00:24

ikewdu

Re : Help -Grub rescue- pour dual boot

Salut,

Le premier disque est normal et tu peux booter normalement. Mais le second est HS illisible.  Donc, plus de Windows. Quant à la clé USB, essaie de la refaire avec Unetbootin ou Etcher, voire Rufus si tu as un windows.

Dernière modification par ikewdu (Le 20/05/2019, à 06:11)

Hors ligne

#15 Le 19/05/2019, à 18:17

kurihana30

Re : Help -Grub rescue- pour dual boot

Bonjour,

le second HS ? Il est presque neuf, mais bon tant pis on va voir. Dans ce cas je ferais un dual boot sur un seul disque.
J'essaye unetbootin (dont je me servais avant en plus), et je reviens ici ensuite, merci.

Hors ligne

#16 Le 19/05/2019, à 22:46

geole

Re : Help -Grub rescue- pour dual boot

Bonsoir
Rien ne prouve que ton second disque est H.S.
La seule évidence est que, fonctionnellement parlant, les descriptions des partitions sont  plus qu'anormales

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
/dev/sdb1     ?     6,579,571 1,924,427,647 1,917,848,077  70 DiskSecure Multi-Boot
/dev/sdb2     ? 1,953,251,627 3,771,827,541 1,818,575,915  43 Unknown
/dev/sdb3     ?   225,735,265   225,735,274            10  72 Unknown
/dev/sdb4       2,642,411,520 2,642,463,409        51,890   0 Empty

/dev/sdb1 overlaps with /dev/sdb3
/dev/sdb2 ends after the last sector of /dev/sdb
/dev/sdb2 overlaps with /dev/sdb4
/dev/sdb4 ends after the last sector of /dev/sdb

Pour savoir si physiquement le disque a un problème, il faut faire un état smart https://doc.ubuntu-fr.org/smartmontools
A)  Faire l'installation.

sudo apt-get install --no-install-recommends smartmontools

B) publier le retour de cette commande

sudo   smartctl    -s    on    -a      /dev/sdb

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#17 Le 20/05/2019, à 06:10

ikewdu

Re : Help -Grub rescue- pour dual boot

Salut,

Quand je dis HS, je veux dire inexploitable dans l'état. Abus de langage de ma part, en effet. J'ai modifié le message.  Il faut bien sûr le vérifier et faire un rapport smart pour déterminer si c'est simplement un problème de table de partitions ou si c'est plus sérieux.

Dernière modification par ikewdu (Le 20/05/2019, à 06:12)

Hors ligne

#18 Le 20/05/2019, à 15:33

kurihana30

Re : Help -Grub rescue- pour dual boot

Bonjour,

ah d'accord. En effet, rien qu'à voir mes partitions là, je bug et je sèche, elles sont en effet bizarroïdes même.
J'ai bien utilisé unetbootin hier, essayé de la lancer en modifiant le bios au début, rien n'y a fait. Au reboot, il rebascule sur mon disque dur numéro 1. J'essaye désormais smartools mais ça ne résout pas l'histoire avec la clé usb. Ou bien ?

Hors ligne

#19 Le 20/05/2019, à 15:42

kurihana30

Re : Help -Grub rescue- pour dual boot

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-37-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1ER162
Serial Number:    Z4Y5ZV8Y
LU WWN Device Id: 5 000c50 07ad37118
Firmware Version: CC45
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon May 20 16:33:36 2019 CEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   80) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 106) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   099   006    Pre-fail  Always       -       7771616
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       36
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       58033
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       81
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       36
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   076   075   045    Old_age   Always       -       24 (Min/Max 24/24)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       18
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       58
194 Temperature_Celsius     0x0022   024   040   000    Old_age   Always       -       24 (0 11 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       83h+04m+35.213s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       937056061
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1441427

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#20 Le 20/05/2019, à 16:59

geole

Re : Help -Grub rescue- pour dual boot

Bonjour

kurihana30 a écrit :
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-37-generic] (local build)
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1ER162
Serial Number:    Z4Y5ZV8Y

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       36
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       81
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged
.

Ton disque est physiquement en bon état.
Son firmware est à jour car ce  n'est pas le modèle     ST1000DM003    9YN162    1TB.

Il y a donc eu un raté logiciel:
Essaies de lancer gparted et de supprimer toutes les partitions puis de créer une table de partition au format MS-DOS . puis les partitions dont tu as besoin.
Si tu prévois plus de quatre partitions, fais une table de partition  au format GPT. (pas compatible avec les ordinateurs du siecle passé)..


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#21 Le 20/05/2019, à 17:14

kurihana30

Re : Help -Grub rescue- pour dual boot

Je ne vois pas comment formater en ms dos par contre https://zupimages.net/up/19/21/v3b5.png

Bon à force d'acharnement et malgré mes yeux qui piquent à force d'être dessus, j'ai pu formater en ms dos finalement.

Après lancement de la clé USB bootable avec Windows dessus et bien j'ai un boot error

Dernière modification par kurihana30 (Le 20/05/2019, à 17:37)

Hors ligne

#22 Le 20/05/2019, à 18:12

kurihana30

Re : Help -Grub rescue- pour dual boot

Et là j'ai essayé avec une clé bootable linux, au démarrage il me met un isolinux.bin missing.
Est-ce que ça peut donner une indication sur pourquoi ça ne fonctionne pas?

Hors ligne

#23 Le 20/05/2019, à 20:23

ikewdu

Re : Help -Grub rescue- pour dual boot

Petite question, car j'ai perdu le fil : tu veux créer une clé d'installation de Windows ou d'autre chose ?

Hors ligne

#24 Le 20/05/2019, à 21:52

kurihana30

Re : Help -Grub rescue- pour dual boot

ikewdu a écrit :

Petite question, car j'ai perdu le fil : tu veux créer une clé d'installation de Windows ou d'autre chose ?


Au début c'était pas ça car j'avais un problème de Grub et au final je pense que maintenant c'est peut-être réglé, et je veux installer effectivement Win sur mon second disque dur et ensuite faire un dual boot avec Linux à côté.
La clé win est réussie grâce à vous tantôt, mais impossible de la lancer, elle est visible mais au démarrage  elle fait boot error. Alors je ne suis pas sûre si c'est à cause des manipulations précédentes .
J'ai déjà une clé d'install linux de prête également

Hors ligne

#25 Le 28/05/2019, à 18:51

kurihana30

Re : Help -Grub rescue- pour dual boot

Bonsoir, comment fermer ce post ?
Je n'arrive à rien le sujet va mourir donc autant le fermer.
On va me prêter un ordinateur avec un disque dur formaté en ext4  je vais me débrouiller avec ça quelques temps. Je reviendrais ici si je n'arrive pas à trouver une autre solution avant.
Merci de l'aide apportée. Et vive le libre !

Hors ligne