Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/11/2018, à 13:27

Dznet

[Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Bonjour,

Comme l'indique le titre, j'ai de gros soucis pour installer ubuntu 18.04 sur un ordi de marque Lenovo ideapad s210 500Go + 16Go SSD
Je voulais montrer à un ami, que Gnu/linux c'est vraiment mieux, mais il se retrouve dans une situation ou il n'a plus d'ordi à l'heure actuelle,

Tentative N°1

En double boot avec W10
Nous avons tous mis en Legacy, le securboot se désactive automatiquement
Réduction de la partition Windows, et création de trois partitions /, swap et /home.

L'installation se fait, mais impossible de démarrer que ce soit sur Windows ou Ubuntu, malgré nos nombreuse tentative

Tentative N°2
Vue qu'il n'utilise Windows par deffaut et non pour un logiciel particulier, je lui est proposé de supprimer Windows et de mettre uniquement Ubuntu
je supprime toutes les partitions existante, il y en avait des bizarre.
Il restait que les deux disque :
/dev/sda qui est une sorte de disque SSD
et /dev/sdb
Je reste en Legacy
Je me dis tien je vais mettre la partition racine "/" sur sda, et la swap et le home dans sdb
Mais impossible d'installer quoi que ce soit du ce foutu sda.

Pas grave, je suis un conseil sur l'un des forum, je mets le sda en gpt, mais je n'y install rien.
et je partitionne sdb et je fais l'install
Mais lors de l'installation de grub2, j'ai un message d'ereur me disant qu'il est impossible d'installer grub2 sur sda.
Je choisir donc de le mettre sur sdb, je reboote, mais j'ai un écran noir, il cherche le boot.
je passe un coup de boot-repair, supergrub, tous ce que je trouve quoi, mais rien à faire.

Tentative N°3 full EFI
Cette fois je lance l'install en uefi en désactivant le securboot, mais à la fin lors de l'install du grub j'ai le message suivant:
"le paquet grub-pc n’a pas pu être installé dans /target/ ...."

Je ne sais plus quoi faire

voici le bootinfo

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Nov2014]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so


sdb2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so


sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 1310904 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the 
                       /boot/syslinux directory. No errors found in the Boot 
                       Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /boot/syslinux/syslinux.cfg /EFI/BOOT/grubx64.efi 
                       /debian3/efi/boot/bootx64.efi 
                       /manjaro1/efi/boot/bootx64.efi 
                       /boot/grub/i386-pc/core.img /boot/syslinux/ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048    31,277,055    31,275,008  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048    20,972,751    20,970,704  83 Linux
/dev/sdb2          20,973,568    29,362,175     8,388,608  82 Linux swap / Solaris
/dev/sdb3          29,364,222   976,773,119   947,408,898   5 Extended
/dev/sdb5          29,364,224   976,773,119   947,408,896  83 Linux


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 16.8 GB, 16840130560 bytes
255 heads, 63 sectors/track, 2047 cylinders, total 32890880 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *          2,048    32,890,879    32,888,832   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              iso9660    Boot-Repair-Disk 64bit
/dev/loop1                                              squashfs   
/dev/sda1        04527d08-ad24-4128-ba5a-c0772410e875   ext4       
/dev/sdb1        fddadcb0-db9b-4815-958f-e55ad328d8e1   ext4       
/dev/sdb2        e5cd3556-9028-4be9-bf77-ca5326af0852   swap       
/dev/sdb5        b93a8451-d734-415a-90b5-4a066d42eb86   ext4       home
/dev/sdc1        B4D3-5F76                              vfat       lili
/dev/zram0       00a9ed43-8483-4f6b-bcec-6ea1e5213e5a   swap       
/dev/zram1       77d66404-8679-4231-98c5-aec063cb263b   swap       
/dev/zram2       7cb6f25f-6407-4e28-a4bc-41d1d131fe10   swap       
/dev/zram3       980b64b8-a427-4725-b29d-1ac660e588cd   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 27 11:09 ata-LITEONIT_LSS-16L6G_S0C41154Z1ZSCA014733 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 27 11:09 ata-LITEONIT_LSS-16L6G_S0C41154Z1ZSCA014733-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Nov 27 11:09 ata-ST500LT012-9WS142_W0VGX8H4 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 27 11:09 ata-ST500LT012-9WS142_W0VGX8H4-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 27 11:09 ata-ST500LT012-9WS142_W0VGX8H4-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Nov 27 11:09 ata-ST500LT012-9WS142_W0VGX8H4-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Nov 27 11:09 ata-ST500LT012-9WS142_W0VGX8H4-part5 -> ../../sdb5
lrwxrwxrwx 1 root root  9 Nov 27 11:09 usb-Generic_Flash_Disk_452D6270-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Nov 27 11:09 usb-Generic_Flash_Disk_452D6270-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Nov 27 11:09 usb-Generic_USB2.0-CRW_20100201396000000 -> ../../sdd
lrwxrwxrwx 1 root root  9 Nov 27 11:09 wwn-0x5000c5006e65f972 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 27 11:09 wwn-0x5000c5006e65f972-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 27 11:09 wwn-0x5000c5006e65f972-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Nov 27 11:09 wwn-0x5000c5006e65f972-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Nov 27 11:09 wwn-0x5000c5006e65f972-part5 -> ../../sdb5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /cdrom                   iso9660    (ro,noatime)
/dev/loop1       /rofs                    squashfs   (ro,noatime)
/dev/sdc1        /isodevice               vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdc1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.

timeout 30
default /default
#convert -resize 640x480 -colors 14 /media/multisystem/boot/splash/splash.png /media/multisystem/boot/splash/splash.xpm.gz
splashimage=/boot/splash/splash.xpm.gz
#color blue/green yellow/red white/magenta white/magenta
foreground=0033FF
background=FF3300

#http://diddy.boot-land.net/grub4dos/Grub4dos.htm
#http://www.boot-land.net/forums/index.php?showforum=66
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|11-12-2016-23:12:56-019346070|cd140201.iso|multisystem-ntpassword|17Mio|
title NT Password
find --set-root /cd140201.iso
map /cd140201.iso (0xff) || map --mem /cd140201.iso (0xff)
map --hook
chainloader (0xff)
boot

#MULTISYSTEM_MENU_FIN|11-12-2016-23:12:56-019346070|cd140201.iso|multisystem-ntpassword|17Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#http://diddy.boot-land.net/grub4dos/files/syntax.htm

title Chainloader into GRUB 2
find --set-root /boot/grub/boot.img
chainloader /boot/grub/boot.img
boot

#title Chainloader into Syslinux
#map (hd0) (hd0)
#map (hd0) (hd0)
#chainloader (hd0,0)+1
#rootnoverify (hd0,0)

##Autre solution pour chainer Syslinux
##faire une copie du mbr de la clé USB
##dd if=/dev/sd?1 of=/media/multisystem/syslinux.mbr bs=512 count=1
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#map (hd0) (hd0)
#map (hd0) (hd0)
#map --rehook
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#chainloader /syslinux.mbr

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root /boot/syslinux/ldlinux.sys
#chainloader /boot/syslinux/ldlinux.sys

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /boot/syslinux/redir.img
#kernel /boot/syslinux/memdisk
#initrd /boot/syslinux/redir.img

#http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/
title FreeDos
kernel /boot/syslinux/memdisk
initrd /boot/img/fdboot.img

title find and load NTLDR of Windows NT/2K/XP
fallback 1
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
chainloader /ntldr
savedefault --wait=2

title find and load BOOTMGR of Windows VISTA/SEVEN
fallback 2
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
savedefault --wait=2

title find and load CMLDR, the Recovery Console of Windows NT/2K/XP
fallback 3
find --set-root --ignore-floppies --ignore-cd /cmldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /cmldr
chainloader /cmldr
#####################################################################
# write string "cmdcons" to memory 0000:7C03 in 2 steps:
#####################################################################
# step 1. Write 4 chars "cmdc" at 0000:7C03
write 0x7C03 0x63646D63
# step 2. Write 3 chars "ons" and an ending null at 0000:7C07
write 0x7C07 0x00736E6F
savedefault --wait=2

title find and load IO.SYS of Windows 9x/Me
fallback 4
find --set-root /io.sys
chainloader /io.sys
savedefault --wait=2

title find and boot 0PE.ISO
fallback 5
find --set-root /0PE/0PE.ISO
map /0PE/0PE.ISO (0xff) || map --mem /0PE/0PE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot MicroPE.ISO
fallback 6
find --set-root /boot/MicroPE.ISO
map /boot/MicroPE.ISO (0xff) || map --mem /boot/MicroPE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot ubcd.iso
fallback 8
find --set-root /ubcd.iso
map /ubcd.iso (0xff) || map --mem /ubcd.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title commandline
commandline

title reboot
reboot

title halt
halt
--------------------------------------------------------------------------------

=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#insmod gpt
#insmod pc
#insmod gfxmenu
#
#insmod videotest
insmod tga
insmod png
insmod gfxterm
insmod lspci
#insmod vbeinfo
insmod vbe
insmod ntfs
insmod chain
insmod biosdisk
insmod font
#http://grub.enbug.org/ThemeFormat
#http://grub.gibibit.com/Theme_format#colors
#http://code.google.com/p/burg/wiki/InstallUbuntu
#http://code.google.com/p/burg/downloads/list
#http://ubuntuforums.org/showthread.php?t=1195275
#pour acces a grub2 du bootloader principal modifier dans fichier: /etc/default/grub
#GRUB_HIDDEN_TIMEOUT=10 #0 par defaut
#GRUB_HIDDEN_TIMEOUT_QUIET=false #true d'origine
#sudo update-grub
#echo -n "Press ESC to see the menu... "
#if sleep --verbose --interruptible 5 ; then
#set timeout=10
#fi
set default=0
set timeout=10
set fallback=1
search --no-floppy --fs-uuid --set=root B4D3-5F76
set root=${root}
#http://grub.enbug.org/gfxterm
if loadfont /boot/polices/unicode.pf2 ; then
set gfxmode=640x480
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
#set gfxmode=auto
#set gfxpayload=keep
fi
fi
#set locale_dir=/boot/grub/locale
#set lang=en
#insmod gettext
if background_image /boot/splash/splash.png ; then
#text no sel/fond ecran
set color_normal=blue/black #1
#text sel/fond ecran sel
set color_highlight=green/white #1
else
set menu_color_normal=blue/black #2
set menu_color_highlight=green/white #2
set color_normal=blue/magenta #2
set color_highlight=green/white #2
fi
#set gfxpayload="1280x1024,1024x768,800x600,640x480"
#set gfxpayload=keep
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:18:35-323663974|boot-repair-disk-32bit.iso|multisystem-lubuntu|598Mio|
menuentry "boot-repair-disk-32bit.iso" {
search --set -f "/boot-repair-disk-32bit.iso"
loopback loop "/boot-repair-disk-32bit.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:18:35-323663974|boot-repair-disk-32bit.iso|multisystem-lubuntu|598Mio|
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:23:02-318774432|boot-repair-disk-64bit.iso|multisystem-lubuntu|613Mio|
menuentry "boot-repair-disk-64bit.iso" {
search --set -f "/boot-repair-disk-64bit.iso"
loopback loop "/boot-repair-disk-64bit.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:23:02-318774432|boot-repair-disk-64bit.iso|multisystem-lubuntu|613Mio|
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:36:14-561138989|gparted-live-0.25.0-3-i686.iso|multisystem-gparted|265Mio|
menuentry "gparted-live-0.25.0-3-i686.iso" {
search --set -f "/gparted-live-0.25.0-3-i686.iso"
loopback loop "/gparted-live-0.25.0-3-i686.iso"
linux (loop)/live/vmlinuz toram=filesystem.squashfs findiso=/gparted-live-0.25.0-3-i686.iso boot=live union=overlay username=user config components quiet noswap noeject vga=791 ip=  nosplash
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:36:14-561138989|gparted-live-0.25.0-3-i686.iso|multisystem-gparted|265Mio|
#MULTISYSTEM_MENU_DEBUT|09-08-2016-12:20:16-337983408|clonezilla-live-2.4.7-8-i686.iso|multisystem-clonezilla|187Mio|
menuentry "clonezilla-live-2.4.7-8-i686.iso" {
search --set -f "/clonezilla-live-2.4.7-8-i686.iso"
loopback loop "/clonezilla-live-2.4.7-8-i686.iso"
linux (loop)/live/vmlinuz findiso=/clonezilla-live-2.4.7-8-i686.iso toram=filesystem.squashfs boot=live union=overlay username=user config components noswap edd=on nomodeset noprompt nosplash locales= keyboard-layouts= ocs_live_run=ocs-live-general ocs_live_extra_param= ocs_live_batch=no gfxpayload=1024x768x16,1024x768 ip=frommedia i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.blacklist=yes
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|09-08-2016-12:20:16-337983408|clonezilla-live-2.4.7-8-i686.iso|multisystem-clonezilla|187Mio|
#MULTISYSTEM_MENU_DEBUT|22-06-2016-15:55:43-047710055|clonezilla-live-20151012-wily-amd64.iso|multisystem-clonezilla|194Mio|
menuentry "clonezilla-live-20151012-wily-amd64.iso" {
search --set -f "/clonezilla-live-20151012-wily-amd64.iso"
loopback loop "/clonezilla-live-20151012-wily-amd64.iso"
linux (loop)/live/vmlinuz findiso=/clonezilla-live-20151012-wily-amd64.iso toram=filesystem.squashfs boot=live union=overlay username=user config components noswap edd=on nomodeset noprompt nosplash locales= keyboard-layouts= ocs_live_run=ocs-live-general ocs_live_extra_param= ocs_live_batch=no gfxpayload=1024x768x16,1024x768 ip=frommedia i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.blacklist=yes
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|22-06-2016-15:55:43-047710055|clonezilla-live-20151012-wily-amd64.iso|multisystem-clonezilla|194Mio|
#MULTISYSTEM_MENU_DEBUT|09-06-2017-15:13:47-550195066|linuxmint-18.1-cinnamon-64bit.iso|multisystem-linuxmint|1726Mio|
menuentry "linuxmint-18.1-cinnamon-64bit.iso" {
search --set -f "/linuxmint-18.1-cinnamon-64bit.iso"
loopback loop "/linuxmint-18.1-cinnamon-64bit.iso"
linux (loop)/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper locale=fr_FR bootkbd=fr console-setup/layoutcode=fr console-setup/variantcode=oss iso-scan/filename=/linuxmint-18.1-cinnamon-64bit.iso noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-06-2017-15:13:47-550195066|linuxmint-18.1-cinnamon-64bit.iso|multisystem-linuxmint|1726Mio|
#MULTISYSTEM_MENU_DEBUT|02-02-2018-23:11:45-787013950|xubuntu-16.04.3-desktop-amd64.iso|multisystem-xubuntu|1271Mio|
menuentry "xubuntu-16.04.3-desktop-amd64.iso" {
search --set -f "/xubuntu-16.04.3-desktop-amd64.iso"
loopback loop "/xubuntu-16.04.3-desktop-amd64.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-16.04.3-desktop-amd64.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-02-2018-23:11:45-787013950|xubuntu-16.04.3-desktop-amd64.iso|multisystem-xubuntu|1271Mio|
#MULTISYSTEM_MENU_DEBUT|05-05-2018-15:45:41-155399480|debian3|multisystem-debian|291Mio|
menuentry "Debian stretch Expert NetInstall amd64" {
linux /debian3/install.amd/vmlinuz root=UUID=B4D3-5F76 cdrom-detect/try-usb=true priority=low --- 
initrd /debian3/install.amd/initrd.gz 
}
menuentry "Debian stretch gnome NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=gnome root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch kde NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=kde root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch lxde NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=lxde root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch xfce NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=xfce root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
#MULTISYSTEM_MENU_FIN|05-05-2018-15:45:41-155399480|debian3|multisystem-debian|291Mio|
#MULTISYSTEM_MENU_DEBUT|09-06-2018-03:45:46-122493757|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
menuentry "ubuntu-18.04-desktop-amd64.iso" {
search --set -f "/ubuntu-18.04-desktop-amd64.iso"
loopback loop "/ubuntu-18.04-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-18.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-06-2018-03:45:46-122493757|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
#MULTISYSTEM_MENU_DEBUT|24-11-2018-11:20:11-667701283|manjaro1|multisystem-manjaro|1905Mio|
menuentry "Manjaro x86_64" {
linux /manjaro1/boot/vmlinuz-x86_64 misobasedir=manjaro1/manjaro misolabel=lili nouveau.modeset=1 quiet systemd.show_status=1 nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
initrd /manjaro1/boot/intel_ucode.img /manjaro1/boot/initramfs-x86_64.img
}
#MULTISYSTEM_MENU_FIN|24-11-2018-11:20:11-667701283|manjaro1|multisystem-manjaro|1905Mio|
#MULTISYSTEM_MENU_DEBUT|24-11-2018-12:19:50-567494665|xubuntu-18.04.1-desktop-amd64.iso|multisystem-xubuntu|1367Mio|
menuentry "xubuntu-18.04.1-desktop-amd64.iso" {
search --set -f "/xubuntu-18.04.1-desktop-amd64.iso"
loopback loop "/xubuntu-18.04.1-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-18.04.1-desktop-amd64.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|24-11-2018-12:19:50-567494665|xubuntu-18.04.1-desktop-amd64.iso|multisystem-xubuntu|1367Mio|
#MULTISYSTEM_MENU_DEBUT|25-11-2018-23:29:00-268927169|puppy1|multisystem-puppylinux|330Mio|
menuentry "xenialpup64-7.5-uefi" {
linux /puppy1/vmlinuz psubdir=puppy1 pmedia=usbflash
initrd /puppy1/initrd.gz
}
#MULTISYSTEM_MENU_FIN|25-11-2018-23:29:00-268927169|puppy1|multisystem-puppylinux|330Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
menuentry "______________Grub4Dos______________" {
echo
}
#http://grub4dos.sourceforge.net/
#http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos_tutorial
menuentry "Grub4Dos" {
	linux /boot/grub.exe --config-file=/boot/grub/menu.lst
}
menuentry "______________Syslinux______________" {
echo
}
#solution tordue, mais qui passe partout ...
#menuentry "Syslinux" {
#search --set -f /boot/syslinux/redir.img
#	linux16 /boot/syslinux/memdisk
#	initrd16 /boot/syslinux/redir.img
#}
#http://syslinux.zytor.com
menuentry "Syslinux" {
search --set -f "/boot/syslinux/ldlinux.sys"
drivemap -s (hd0) $root
chainloader +1
}
#Autre solution pour chainer Syslinux via une copie du mbr
#dd if=/dev/sd?1 of=/media/multisystem/boot/img/syslinux.mbr bs=512 count=1
#menuentry "Syslinux" {
#search --set -f "/boot/img/syslinux.mbr"
#drivemap -s (hd0) $root
#chainloader /boot/img/syslinux.mbr
#}
menuentry "______________UTIL______________" {
echo
}
## for debugging set debug=efi
#menuentry "0-testfakebios" {
#	hexdump -s 0xc0000 (mem)
#	fakebios
#	hexdump -s 0xc0000 (mem)
## deliberate error to get wait for key
#	xxx
#}
#How to test GRUB 2 on Macbook
#http://grub.enbug.org/TestingOnMacbook
#
#http://wiki.gentoo.org/wiki/GRUB2
#
#menuentry "Windows 7 BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/bootmgr
#}
#menuentry "Windows XP BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/ntldr
#}
#
#chainer un autre grub
#menuentry "grub.cfg auf /dev/sdb1" {
#	configfile (hd1,1)/boot/grub/grub.cfg
#}
#menuentry "Chain other configfile" {
#configfile /boot/grub/grub-xxx.cfg
#}
#
#menuentry "Return default menu" {
#chainloader /boot/grub/boot.img
#}
#chainer win ou autre OS
#menuentry "Chainer UUID de la partition" {
#insmod=ntfs
#set root=(hd0,1)
#search --no-floppy --fs-uuid --set=root xxx-xxx
#	drivemap -s (hd0) $root
#	chainloader +1
#}
#Booter une iso avec memdisk
#menuentry "FreeBSD" {
#    search --set -f "/FreeBSD-10.2-RELEASE-amd64-bootonly.iso"
#    linux16 /boot/syslinux/memdisk iso raw
#    initrd16 /FreeBSD-10.2-RELEASE-amd64-bootonly.iso
#}
#http://www.plop.at/en/bootmanagerdl.html
menuentry "PLoP Boot Manager" {
	linux16 /boot/img/plpbt
}
#http://www.supergrubdisk.org/
#http://developer.berlios.de/project/showfiles.php?group_id=10921
#SG2D (Floppy, CD & USB in one)
#super_grub_disk_hybrid-1.98s1.iso
menuentry "Super Grub2 Disk" {
search --set -f /boot/img/sgdh.iso
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdh.iso
}
menuentry "Super Grub Disk" {
search --set -f /boot/img/sgdfr.img
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdfr.img
}
menuentry "Smart Boot Manager" {
search --set -f /boot/img/sbootmgr.dsk
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sbootmgr.dsk
}
#Site: http://boot.kernel.org/index.html
#Téléchargement: http://boot.kernel.org/gpxe_images/gpxe.lkrn
menuentry "BKO (boot.kernel.org)" {
	search --set -f /boot/img/gpxe.lkrn
	linux16 /boot/img/gpxe.lkrn
}
#http://www.memtest.org/#downiso
menuentry "memtest86+" {
	linux16 /boot/img/memtest86+.bin
}
menuentry "vbeinfo" {
	vbeinfo
read
}
menuentry "lspci" {
	lspci
read
}
menuentry "gfxpayload 640x480" {
set gfxpayload=640x480
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 800x600" {
set gfxpayload=800x600
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1024x768" {
set gfxpayload=1024x768
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1280x1024" {
set gfxpayload=1280x1024
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "Reboot" {
insmod reboot
reboot
}
--------------------------------------------------------------------------------

======================= sdc1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
default /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  COM32R module (v4.xx)
 boot/syslinux/hdt.c32              :  COM32R module (v4.xx)
 boot/syslinux/ifplop.c32           :  COM32R module (v4.xx)
 boot/syslinux/menu.c32             :  COM32R module (v4.xx)
 boot/syslinux/reboot.c32           :  COM32R module (v4.xx)
 boot/syslinux/vesamenu.c32         :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb3

00000000  ed 41 00 00 00 10 00 00  8b 18 e2 5a 56 be fa 5b  |.A.........ZV..[|
00000010  8b 18 e2 5a 00 00 00 00  00 00 02 00 08 00 00 00  |...Z............|
00000020  00 00 08 00 03 00 00 00  0a f3 01 00 04 00 00 00  |................|
00000030  00 00 00 00 00 00 00 00  01 00 00 00 f4 21 38 00  |.............!8.|
00000040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000060  00 00 00 00 82 40 1e 06  00 00 00 00 00 00 00 00  |.....@..........|
00000070  00 00 00 00 00 00 00 00  00 00 00 00 43 f8 00 00  |............C...|
00000080  20 00 16 1e 88 28 e2 22  00 00 00 00 00 00 00 00  | ....(."........|
00000090  06 be fa 5b 28 c5 de 45  00 00 00 00 00 00 00 00  |...[(..E........|
000000a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000100  ed 41 00 00 00 10 00 00  8b 18 e2 5a 56 be fa 5b  |.A.........ZV..[|
00000110  8b 18 e2 5a 00 00 00 00  00 00 02 00 08 00 00 00  |...Z............|
00000120  00 00 08 00 03 00 00 00  0a f3 01 00 04 00 00 00  |................|
00000130  00 00 00 00 00 00 00 00  01 00 00 00 f5 21 38 00  |.............!8.|
00000140  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000160  00 00 00 00 dc b3 1f e8  00 00 00 00 00 00 00 00  |................|
00000170  00 00 00 00 00 00 00 00  00 00 00 00 85 65 00 00  |.............e..|
00000180  20 00 f0 98 88 28 e2 22  00 00 00 00 00 00 00 00  | ....(."........|
00000190  06 be fa 5b 28 c5 de 45  00 00 00 00 00 00 00 00  |...[(..E........|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 fe  |................|
000001c0  ff ff 83 fe ff ff 02 00  00 00 00 50 78 38 00 00  |...........Px8..|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


========= Devices which don't seem to have a corresponding hard drive: =========

sdd 

=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 9 (/proc/2214/mounts) leaked on lvs invocation. Parent PID 10978: bash
File descriptor 63 (pipe:[28420]) leaked on lvs invocation. Parent PID 10978: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2018-11-27__11h09 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2214/mounts) leaked on lvs invocation. Parent PID 4693: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=(loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb1 : Error code 32
mount -r /dev/sdb1 /mnt/boot-sav/sdb1
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb1 : Error code 32
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb5 : Error code 32
mount -r /dev/sdb5 /mnt/boot-sav/sdb5
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb5 : Error code 32

=================== os-prober:
/dev/sdb1:Ubuntu 18.04 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/loop0: LABEL="Boot-Repair-Disk 64bit" TYPE="iso9660"
/dev/loop1: TYPE="squashfs"
/dev/sda1: UUID="04527d08-ad24-4128-ba5a-c0772410e875" TYPE="ext4"
/dev/sdb1: UUID="fddadcb0-db9b-4815-958f-e55ad328d8e1" TYPE="ext4"
/dev/sdb2: UUID="e5cd3556-9028-4be9-bf77-ca5326af0852" TYPE="swap"
/dev/sdb5: LABEL="home" UUID="b93a8451-d734-415a-90b5-4a066d42eb86" TYPE="ext4"
/dev/sdc1: LABEL="lili" UUID="B4D3-5F76" TYPE="vfat"
/dev/zram0: UUID="00a9ed43-8483-4f6b-bcec-6ea1e5213e5a" TYPE="swap"
/dev/zram1: UUID="77d66404-8679-4231-98c5-aec063cb263b" TYPE="swap"
/dev/zram2: UUID="7cb6f25f-6407-4e28-a4bc-41d1d131fe10" TYPE="swap"
/dev/zram3: UUID="980b64b8-a427-4725-b29d-1ac660e588cd" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb1 : Error code 32
mount -r /dev/sdb1 /mnt/boot-sav/sdb1
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb1 : Error code 32
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb5 : Error code 32
mount -r /dev/sdb5 /mnt/boot-sav/sdb5
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb5 : Error code 32
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== No kernel in /isodevice/boot:
grub
grub.exe
img
kexec-loader.lst
multisystem.bs.save
polices
splash
syslinux


/isodevice/boot/grub/menu.lst detected

efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 2003,2001,2002
Boot0000* EFI Network 0 for IPv4 (50-AF-73-61-9A-68) 	ACPI(a0341d0,0)PCI(1c,2)PCI(0,0)MAC(50af73619a68,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0RC
Boot0001* EFI USB Device (Generic Flash Disk)	ACPI(a0341d0,0)PCI(1d,0)USB(0,0)USB(0,0)HD(1,800,1f5d800,000767ac)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb1.
sdb5	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdb5.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/isodevice.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA LITEONIT LSS-16L (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  16.0GB  16.0GB  primary  ext4


Model: ATA ST500LT012-9WS14 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  10.7GB  10.7GB  primary   ext4
2      10.7GB  15.0GB  4295MB  primary   linux-swap(v1)
3      15.0GB  500GB   485GB   extended
5      15.0GB  500GB   485GB   logical   ext4


Model: Generic Flash Disk (scsi)
Disk /dev/sdc: 16.8GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  16.8GB  16.8GB  primary  fat32        boot



                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:16.0GB:scsi:512:512:msdos:ATA LITEONIT LSS-16L;
1:1049kB:16.0GB:16.0GB:ext4::;

BYT;
/dev/sdb:500GB:scsi:512:4096:msdos:ATA ST500LT012-9WS14;
1:1049kB:10.7GB:10.7GB:ext4::;
2:10.7GB:15.0GB:4295MB:linux-swap(v1)::;
3:15.0GB:500GB:485GB:::;
5:15.0GB:500GB:485GB:ext4::;

BYT;
/dev/sdc:16.8GB:scsi:512:512:msdos:Generic Flash Disk;
1:1049kB:16.8GB:16.8GB:fat32::boot;


                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /isodevice type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /cdrom type iso9660 (ro,noatime)
/dev/loop1 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb5 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 rts51x1 sda sda1 sdb sdb1 sdb2 sdb3 sdb5 sdc sdc1 sdd sg0 sg1 sg2 sg3 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 10 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 08 00 00  |........ .@.....|
00000020  00 d8 f5 01 ac 3e 00 00  00 00 00 00 02 00 00 00  |.....>..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 76 5f d3 b4 6c  69 6c 69 20 20 20 20 20  |..)v_..lili     |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 b8 00 14 00 66 ba  |.t...F}.f.....f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 8a  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.9G   17M  1.9G   1% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      385M  1.2M  384M   1% /run
/dev/sdc1      vfat        16G   11G  5.3G  67% /isodevice
/dev/loop0     iso9660    614M  614M     0 100% /cdrom
/dev/loop1     squashfs   549M  549M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G  8.0K  1.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.9G     0  1.9G   0% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      ext4        15G   38M   14G   1% /mnt/boot-sav/sda1

=================== fdisk -l:

Disk /dev/sda: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8dd18a5a

Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048    31277055    15637504   83  Linux

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xba2ed7d0

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    20972751    10485352   83  Linux
/dev/sdb2        20973568    29362175     4194304   82  Linux swap / Solaris
/dev/sdb3        29364222   976773119   473704449    5  Extended
Partition 3 does not start on physical sector boundary.
/dev/sdb5        29364224   976773119   473704448   83  Linux

Disk /dev/sdc: 16.8 GB, 16840130560 bytes
255 heads, 63 sectors/track, 2047 cylinders, total 32890880 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000767ac

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *        2048    32890879    16444416    b  W95 FAT32



=================== Recommended repair
The default repair of the Boot-Repair utility will restore the [(generic mbr)] MBR in sda, and make it boot on sdc1.
Additional repair will be performed: unhide-bootmenu-10s repair-filesystems


Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
umount: /isodevice: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))

fsck -fyM /dev/sda1
fsck from util-linux 2.20.1

fsck -fyM /dev/sdb1
fsck from util-linux 2.20.1
e2fsck 1.42.9 (4-Feb-2014)
/dev/sdb1 has unsupported feature(s): metadata_csum
e2fsck: Get a newer version of e2fsck!

fsck -fyM /dev/sdb5
fsck from util-linux 2.20.1
e2fsck 1.42.9 (4-Feb-2014)
/dev/sdb5 has unsupported feature(s): metadata_csum
e2fsck: Get a newer version of e2fsck!

fsck -fyM /dev/sdc1
fsck from util-linux 2.20.1
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb1 : Error code 32
mount -r /dev/sdb1 /mnt/boot-sav/sdb1
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb1 : Error code 32
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb5 : Error code 32
mount -r /dev/sdb5 /mnt/boot-sav/sdb5
mount: wrong fs type, bad option, bad superblock on /dev/sdb5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb5 : Error code 32
Will restore the MBR_TO_RESTORE : sda (generic mbr) into sda
dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
0+1 records in
0+1 records out

Le démarrage de l'ordinateur a été correctement réparé.

Vous pouvez maintenant redémarrer votre ordinateur.

Dernière modification par Dznet (Le 27/11/2018, à 15:27)

Hors ligne

#2 Le 27/11/2018, à 14:20

malbo

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Tu y es presque : il faut refaire une installation à neuf en sélectionnant "Effacer le disque et installer Ubuntu" à l'étape "Type d'installation" (ne coche PAS la putain de case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité"). Explication : l'installateur va remplacer automatiquement la table de partition actuelle du type MSDOS par une table de partition du type GPT qui est nécessaire pour faire une installation en mode EFI, puis il va créer automatiquement tout ce qui est nécessaire et suffisant pour le partitionnement : une partition EFI et une partition racine.
Courage !

Dernière modification par malbo (Le 27/11/2018, à 14:24)

Hors ligne

#3 Le 27/11/2018, à 14:46

Dznet

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Merci de ta réponse Malbo,

Je viens de relancer l'install, j'ai choisie "Effacer le disque et installer Ubuntu" puis selectioner le disque sdb; car je ne pense pas qu'il fallait choisir sda vue qu'il fait que 16Go
je reviendrai d'ici qq minutes pour vous donner des nouvelles

Hors ligne

#4 Le 27/11/2018, à 15:27

Dznet

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Bon effectivement, l'installation c'est bien terminée cette fois.
Mais j'ai plusieurs questions:

1) est-ce qu'il faut faire deux fois l'install ou je pouvait mettre le disque sdb en gpt ?
2) faut-il absolument choisir "Effacer le disque et installer Ubuntu", je ne peu pas faire de partitionnement traditionnel ? / + Swap + /home ?

Merci pour ton aide et tes réponses.

Dz

Hors ligne

#5 Le 27/11/2018, à 15:50

malbo

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Je t'ai proposé de sélectionner "Effacer le disque et installer Ubuntu" afin que tu sortes rapidement la tête de l'eau. Mais à présent que tu as eu une première installation faite, tu as une table de partition GPT nécessaire pour l'EFI, tu as une partition EFI donc tu as les bonnes bases si bien que si tu devais réinstaller la même version de Ubuntu ou une autre, ça se passerait beaucoup mieux.
Je te prie de démarrer une session sur ton Ubuntu fraîchement installé et de faire un Boot-Info depuis cette session. Tu donneras l'URL de ce Boot-Info dans ta réponse. Je vais vérifier que tout est d'aplomb avant de répondre à ta question : "je ne peux pas faire de partitionnement traditionnel ? / + Swap + /home ?"

Hors ligne

#6 Le 27/11/2018, à 18:02

Dznet

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Voici le bootinfo

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Nov2014]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sde.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/BOOT/fbx64.efi /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so


sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20140113
    Boot sector info:  Syslinux looks at sector 1310904 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the 
                       /boot/syslinux directory. No errors found in the Boot 
                       Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /boot/syslinux/syslinux.cfg /EFI/BOOT/grubx64.efi 
                       /debian3/efi/boot/bootx64.efi 
                       /manjaro1/efi/boot/bootx64.efi 
                       /boot/grub/i386-pc/core.img /boot/syslinux/ldlinux.sys

sde1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n
    Boot sector info:  Syslinux looks at sector 2317632 of /dev/sde1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1               2,048    31,277,055    31,275,008  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdb1           2,048     1,050,623     1,048,576 EFI System partition
/dev/sdb2       1,050,624   976,771,071   975,720,448 Data partition (Linux)

Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 16.8 GB, 16840130560 bytes
255 heads, 63 sectors/track, 2047 cylinders, total 32890880 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *          2,048    32,890,879    32,888,832   b W95 FAT32


Drive: sde _____________________________________________________________________

Disk /dev/sde: 4009 MB, 4009754624 bytes
126 heads, 22 sectors/track, 2825 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sde1    *             56     7,831,551     7,831,496   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              iso9660    Boot-Repair-Disk 64bit
/dev/loop1                                              squashfs   
/dev/sda1        04527d08-ad24-4128-ba5a-c0772410e875   ext4       
/dev/sdb1        C087-AFE1                              vfat       
/dev/sdb2        507a5f33-8c7a-417e-8416-55ac4b2bd533   ext4       
/dev/sdc1        B4D3-5F76                              vfat       lili
/dev/sde1        3CF8-9F35                              vfat       MYLINUXLIVE
/dev/zram0       8b5127f2-d8c7-4258-9673-f35824d03879   swap       
/dev/zram1       3f7c6174-04c5-4cd0-8a3f-fdf6e2d9cced   swap       
/dev/zram2       b1ac0b19-b5bd-4cc1-92b6-681d9a9ff3ef   swap       
/dev/zram3       f739f55e-8829-4894-bea3-c5b395ae0fbf   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 27 15:59 ata-LITEONIT_LSS-16L6G_S0C41154Z1ZSCA014733 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 27 15:59 ata-LITEONIT_LSS-16L6G_S0C41154Z1ZSCA014733-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Nov 27 15:59 ata-ST500LT012-9WS142_W0VGX8H4 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 27 15:59 ata-ST500LT012-9WS142_W0VGX8H4-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 27 15:59 ata-ST500LT012-9WS142_W0VGX8H4-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Nov 27 15:59 usb-Generic_Flash_Disk_452D6270-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Nov 27 15:59 usb-Generic_Flash_Disk_452D6270-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Nov 27 15:59 usb-Generic_USB2.0-CRW_20100201396000000 -> ../../sdd
lrwxrwxrwx 1 root root  9 Nov 27 15:59 usb-USB_Flash_Disk_FBI1511042400483-0:0 -> ../../sde
lrwxrwxrwx 1 root root 10 Nov 27 15:59 usb-USB_Flash_Disk_FBI1511042400483-0:0-part1 -> ../../sde1
lrwxrwxrwx 1 root root  9 Nov 27 15:59 wwn-0x5000c5006e65f972 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 27 15:59 wwn-0x5000c5006e65f972-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Nov 27 15:59 wwn-0x5000c5006e65f972-part2 -> ../../sdb2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /cdrom                   iso9660    (ro,noatime)
/dev/loop1       /rofs                    squashfs   (ro,noatime)
/dev/sdc1        /isodevice               vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sde1        /media/lubuntu/MYLINUXLIVE vfat       (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)


=========================== sdc1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.

timeout 30
default /default
#convert -resize 640x480 -colors 14 /media/multisystem/boot/splash/splash.png /media/multisystem/boot/splash/splash.xpm.gz
splashimage=/boot/splash/splash.xpm.gz
#color blue/green yellow/red white/magenta white/magenta
foreground=0033FF
background=FF3300

#http://diddy.boot-land.net/grub4dos/Grub4dos.htm
#http://www.boot-land.net/forums/index.php?showforum=66
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|11-12-2016-23:12:56-019346070|cd140201.iso|multisystem-ntpassword|17Mio|
title NT Password
find --set-root /cd140201.iso
map /cd140201.iso (0xff) || map --mem /cd140201.iso (0xff)
map --hook
chainloader (0xff)
boot

#MULTISYSTEM_MENU_FIN|11-12-2016-23:12:56-019346070|cd140201.iso|multisystem-ntpassword|17Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#http://diddy.boot-land.net/grub4dos/files/syntax.htm

title Chainloader into GRUB 2
find --set-root /boot/grub/boot.img
chainloader /boot/grub/boot.img
boot

#title Chainloader into Syslinux
#map (hd0) (hd0)
#map (hd0) (hd0)
#chainloader (hd0,0)+1
#rootnoverify (hd0,0)

##Autre solution pour chainer Syslinux
##faire une copie du mbr de la clé USB
##dd if=/dev/sd?1 of=/media/multisystem/syslinux.mbr bs=512 count=1
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#map (hd0) (hd0)
#map (hd0) (hd0)
#map --rehook
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#chainloader /syslinux.mbr

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root /boot/syslinux/ldlinux.sys
#chainloader /boot/syslinux/ldlinux.sys

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /boot/syslinux/redir.img
#kernel /boot/syslinux/memdisk
#initrd /boot/syslinux/redir.img

#http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/
title FreeDos
kernel /boot/syslinux/memdisk
initrd /boot/img/fdboot.img

title find and load NTLDR of Windows NT/2K/XP
fallback 1
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
chainloader /ntldr
savedefault --wait=2

title find and load BOOTMGR of Windows VISTA/SEVEN
fallback 2
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
savedefault --wait=2

title find and load CMLDR, the Recovery Console of Windows NT/2K/XP
fallback 3
find --set-root --ignore-floppies --ignore-cd /cmldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /cmldr
chainloader /cmldr
#####################################################################
# write string "cmdcons" to memory 0000:7C03 in 2 steps:
#####################################################################
# step 1. Write 4 chars "cmdc" at 0000:7C03
write 0x7C03 0x63646D63
# step 2. Write 3 chars "ons" and an ending null at 0000:7C07
write 0x7C07 0x00736E6F
savedefault --wait=2

title find and load IO.SYS of Windows 9x/Me
fallback 4
find --set-root /io.sys
chainloader /io.sys
savedefault --wait=2

title find and boot 0PE.ISO
fallback 5
find --set-root /0PE/0PE.ISO
map /0PE/0PE.ISO (0xff) || map --mem /0PE/0PE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot MicroPE.ISO
fallback 6
find --set-root /boot/MicroPE.ISO
map /boot/MicroPE.ISO (0xff) || map --mem /boot/MicroPE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot ubcd.iso
fallback 8
find --set-root /ubcd.iso
map /ubcd.iso (0xff) || map --mem /ubcd.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title commandline
commandline

title reboot
reboot

title halt
halt
--------------------------------------------------------------------------------

=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#insmod gpt
#insmod pc
#insmod gfxmenu
#
#insmod videotest
insmod tga
insmod png
insmod gfxterm
insmod lspci
#insmod vbeinfo
insmod vbe
insmod ntfs
insmod chain
insmod biosdisk
insmod font
#http://grub.enbug.org/ThemeFormat
#http://grub.gibibit.com/Theme_format#colors
#http://code.google.com/p/burg/wiki/InstallUbuntu
#http://code.google.com/p/burg/downloads/list
#http://ubuntuforums.org/showthread.php?t=1195275
#pour acces a grub2 du bootloader principal modifier dans fichier: /etc/default/grub
#GRUB_HIDDEN_TIMEOUT=10 #0 par defaut
#GRUB_HIDDEN_TIMEOUT_QUIET=false #true d'origine
#sudo update-grub
#echo -n "Press ESC to see the menu... "
#if sleep --verbose --interruptible 5 ; then
#set timeout=10
#fi
set default=0
set timeout=10
set fallback=1
search --no-floppy --fs-uuid --set=root B4D3-5F76
set root=${root}
#http://grub.enbug.org/gfxterm
if loadfont /boot/polices/unicode.pf2 ; then
set gfxmode=640x480
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
#set gfxmode=auto
#set gfxpayload=keep
fi
fi
#set locale_dir=/boot/grub/locale
#set lang=en
#insmod gettext
if background_image /boot/splash/splash.png ; then
#text no sel/fond ecran
set color_normal=blue/black #1
#text sel/fond ecran sel
set color_highlight=green/white #1
else
set menu_color_normal=blue/black #2
set menu_color_highlight=green/white #2
set color_normal=blue/magenta #2
set color_highlight=green/white #2
fi
#set gfxpayload="1280x1024,1024x768,800x600,640x480"
#set gfxpayload=keep
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:18:35-323663974|boot-repair-disk-32bit.iso|multisystem-lubuntu|598Mio|
menuentry "boot-repair-disk-32bit.iso" {
search --set -f "/boot-repair-disk-32bit.iso"
loopback loop "/boot-repair-disk-32bit.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:18:35-323663974|boot-repair-disk-32bit.iso|multisystem-lubuntu|598Mio|
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:23:02-318774432|boot-repair-disk-64bit.iso|multisystem-lubuntu|613Mio|
menuentry "boot-repair-disk-64bit.iso" {
search --set -f "/boot-repair-disk-64bit.iso"
loopback loop "/boot-repair-disk-64bit.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:23:02-318774432|boot-repair-disk-64bit.iso|multisystem-lubuntu|613Mio|
#MULTISYSTEM_MENU_DEBUT|21-03-2016-16:36:14-561138989|gparted-live-0.25.0-3-i686.iso|multisystem-gparted|265Mio|
menuentry "gparted-live-0.25.0-3-i686.iso" {
search --set -f "/gparted-live-0.25.0-3-i686.iso"
loopback loop "/gparted-live-0.25.0-3-i686.iso"
linux (loop)/live/vmlinuz toram=filesystem.squashfs findiso=/gparted-live-0.25.0-3-i686.iso boot=live union=overlay username=user config components quiet noswap noeject vga=791 ip=  nosplash
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|21-03-2016-16:36:14-561138989|gparted-live-0.25.0-3-i686.iso|multisystem-gparted|265Mio|
#MULTISYSTEM_MENU_DEBUT|09-08-2016-12:20:16-337983408|clonezilla-live-2.4.7-8-i686.iso|multisystem-clonezilla|187Mio|
menuentry "clonezilla-live-2.4.7-8-i686.iso" {
search --set -f "/clonezilla-live-2.4.7-8-i686.iso"
loopback loop "/clonezilla-live-2.4.7-8-i686.iso"
linux (loop)/live/vmlinuz findiso=/clonezilla-live-2.4.7-8-i686.iso toram=filesystem.squashfs boot=live union=overlay username=user config components noswap edd=on nomodeset noprompt nosplash locales= keyboard-layouts= ocs_live_run=ocs-live-general ocs_live_extra_param= ocs_live_batch=no gfxpayload=1024x768x16,1024x768 ip=frommedia i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.blacklist=yes
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|09-08-2016-12:20:16-337983408|clonezilla-live-2.4.7-8-i686.iso|multisystem-clonezilla|187Mio|
#MULTISYSTEM_MENU_DEBUT|22-06-2016-15:55:43-047710055|clonezilla-live-20151012-wily-amd64.iso|multisystem-clonezilla|194Mio|
menuentry "clonezilla-live-20151012-wily-amd64.iso" {
search --set -f "/clonezilla-live-20151012-wily-amd64.iso"
loopback loop "/clonezilla-live-20151012-wily-amd64.iso"
linux (loop)/live/vmlinuz findiso=/clonezilla-live-20151012-wily-amd64.iso toram=filesystem.squashfs boot=live union=overlay username=user config components noswap edd=on nomodeset noprompt nosplash locales= keyboard-layouts= ocs_live_run=ocs-live-general ocs_live_extra_param= ocs_live_batch=no gfxpayload=1024x768x16,1024x768 ip=frommedia i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.blacklist=yes
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|22-06-2016-15:55:43-047710055|clonezilla-live-20151012-wily-amd64.iso|multisystem-clonezilla|194Mio|
#MULTISYSTEM_MENU_DEBUT|09-06-2017-15:13:47-550195066|linuxmint-18.1-cinnamon-64bit.iso|multisystem-linuxmint|1726Mio|
menuentry "linuxmint-18.1-cinnamon-64bit.iso" {
search --set -f "/linuxmint-18.1-cinnamon-64bit.iso"
loopback loop "/linuxmint-18.1-cinnamon-64bit.iso"
linux (loop)/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper locale=fr_FR bootkbd=fr console-setup/layoutcode=fr console-setup/variantcode=oss iso-scan/filename=/linuxmint-18.1-cinnamon-64bit.iso noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-06-2017-15:13:47-550195066|linuxmint-18.1-cinnamon-64bit.iso|multisystem-linuxmint|1726Mio|
#MULTISYSTEM_MENU_DEBUT|02-02-2018-23:11:45-787013950|xubuntu-16.04.3-desktop-amd64.iso|multisystem-xubuntu|1271Mio|
menuentry "xubuntu-16.04.3-desktop-amd64.iso" {
search --set -f "/xubuntu-16.04.3-desktop-amd64.iso"
loopback loop "/xubuntu-16.04.3-desktop-amd64.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-16.04.3-desktop-amd64.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-02-2018-23:11:45-787013950|xubuntu-16.04.3-desktop-amd64.iso|multisystem-xubuntu|1271Mio|
#MULTISYSTEM_MENU_DEBUT|05-05-2018-15:45:41-155399480|debian3|multisystem-debian|291Mio|
menuentry "Debian stretch Expert NetInstall amd64" {
linux /debian3/install.amd/vmlinuz root=UUID=B4D3-5F76 cdrom-detect/try-usb=true priority=low --- 
initrd /debian3/install.amd/initrd.gz 
}
menuentry "Debian stretch gnome NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=gnome root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch kde NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=kde root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch lxde NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=lxde root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
menuentry "Debian stretch xfce NetInstall amd64" {
linux /debian3/install.amd/vmlinuz desktop=xfce root=UUID=B4D3-5F76 cdrom-detect/try-usb=true quiet
initrd /debian3/install.amd/initrd.gz
}
#MULTISYSTEM_MENU_FIN|05-05-2018-15:45:41-155399480|debian3|multisystem-debian|291Mio|
#MULTISYSTEM_MENU_DEBUT|09-06-2018-03:45:46-122493757|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
menuentry "ubuntu-18.04-desktop-amd64.iso" {
search --set -f "/ubuntu-18.04-desktop-amd64.iso"
loopback loop "/ubuntu-18.04-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-18.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-06-2018-03:45:46-122493757|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
#MULTISYSTEM_MENU_DEBUT|24-11-2018-11:20:11-667701283|manjaro1|multisystem-manjaro|1905Mio|
menuentry "Manjaro x86_64" {
linux /manjaro1/boot/vmlinuz-x86_64 misobasedir=manjaro1/manjaro misolabel=lili nouveau.modeset=1 quiet systemd.show_status=1 nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
initrd /manjaro1/boot/intel_ucode.img /manjaro1/boot/initramfs-x86_64.img
}
#MULTISYSTEM_MENU_FIN|24-11-2018-11:20:11-667701283|manjaro1|multisystem-manjaro|1905Mio|
#MULTISYSTEM_MENU_DEBUT|24-11-2018-12:19:50-567494665|xubuntu-18.04.1-desktop-amd64.iso|multisystem-xubuntu|1367Mio|
menuentry "xubuntu-18.04.1-desktop-amd64.iso" {
search --set -f "/xubuntu-18.04.1-desktop-amd64.iso"
loopback loop "/xubuntu-18.04.1-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-18.04.1-desktop-amd64.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|24-11-2018-12:19:50-567494665|xubuntu-18.04.1-desktop-amd64.iso|multisystem-xubuntu|1367Mio|
#MULTISYSTEM_MENU_DEBUT|25-11-2018-23:29:00-268927169|puppy1|multisystem-puppylinux|330Mio|
menuentry "xenialpup64-7.5-uefi" {
linux /puppy1/vmlinuz psubdir=puppy1 pmedia=usbflash
initrd /puppy1/initrd.gz
}
#MULTISYSTEM_MENU_FIN|25-11-2018-23:29:00-268927169|puppy1|multisystem-puppylinux|330Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
menuentry "______________Grub4Dos______________" {
echo
}
#http://grub4dos.sourceforge.net/
#http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos_tutorial
menuentry "Grub4Dos" {
	linux /boot/grub.exe --config-file=/boot/grub/menu.lst
}
menuentry "______________Syslinux______________" {
echo
}
#solution tordue, mais qui passe partout ...
#menuentry "Syslinux" {
#search --set -f /boot/syslinux/redir.img
#	linux16 /boot/syslinux/memdisk
#	initrd16 /boot/syslinux/redir.img
#}
#http://syslinux.zytor.com
menuentry "Syslinux" {
search --set -f "/boot/syslinux/ldlinux.sys"
drivemap -s (hd0) $root
chainloader +1
}
#Autre solution pour chainer Syslinux via une copie du mbr
#dd if=/dev/sd?1 of=/media/multisystem/boot/img/syslinux.mbr bs=512 count=1
#menuentry "Syslinux" {
#search --set -f "/boot/img/syslinux.mbr"
#drivemap -s (hd0) $root
#chainloader /boot/img/syslinux.mbr
#}
menuentry "______________UTIL______________" {
echo
}
## for debugging set debug=efi
#menuentry "0-testfakebios" {
#	hexdump -s 0xc0000 (mem)
#	fakebios
#	hexdump -s 0xc0000 (mem)
## deliberate error to get wait for key
#	xxx
#}
#How to test GRUB 2 on Macbook
#http://grub.enbug.org/TestingOnMacbook
#
#http://wiki.gentoo.org/wiki/GRUB2
#
#menuentry "Windows 7 BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/bootmgr
#}
#menuentry "Windows XP BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/ntldr
#}
#
#chainer un autre grub
#menuentry "grub.cfg auf /dev/sdb1" {
#	configfile (hd1,1)/boot/grub/grub.cfg
#}
#menuentry "Chain other configfile" {
#configfile /boot/grub/grub-xxx.cfg
#}
#
#menuentry "Return default menu" {
#chainloader /boot/grub/boot.img
#}
#chainer win ou autre OS
#menuentry "Chainer UUID de la partition" {
#insmod=ntfs
#set root=(hd0,1)
#search --no-floppy --fs-uuid --set=root xxx-xxx
#	drivemap -s (hd0) $root
#	chainloader +1
#}
#Booter une iso avec memdisk
#menuentry "FreeBSD" {
#    search --set -f "/FreeBSD-10.2-RELEASE-amd64-bootonly.iso"
#    linux16 /boot/syslinux/memdisk iso raw
#    initrd16 /FreeBSD-10.2-RELEASE-amd64-bootonly.iso
#}
#http://www.plop.at/en/bootmanagerdl.html
menuentry "PLoP Boot Manager" {
	linux16 /boot/img/plpbt
}
#http://www.supergrubdisk.org/
#http://developer.berlios.de/project/showfiles.php?group_id=10921
#SG2D (Floppy, CD & USB in one)
#super_grub_disk_hybrid-1.98s1.iso
menuentry "Super Grub2 Disk" {
search --set -f /boot/img/sgdh.iso
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdh.iso
}
menuentry "Super Grub Disk" {
search --set -f /boot/img/sgdfr.img
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdfr.img
}
menuentry "Smart Boot Manager" {
search --set -f /boot/img/sbootmgr.dsk
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sbootmgr.dsk
}
#Site: http://boot.kernel.org/index.html
#Téléchargement: http://boot.kernel.org/gpxe_images/gpxe.lkrn
menuentry "BKO (boot.kernel.org)" {
	search --set -f /boot/img/gpxe.lkrn
	linux16 /boot/img/gpxe.lkrn
}
#http://www.memtest.org/#downiso
menuentry "memtest86+" {
	linux16 /boot/img/memtest86+.bin
}
menuentry "vbeinfo" {
	vbeinfo
read
}
menuentry "lspci" {
	lspci
read
}
menuentry "gfxpayload 640x480" {
set gfxpayload=640x480
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 800x600" {
set gfxpayload=800x600
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1024x768" {
set gfxpayload=1024x768
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1280x1024" {
set gfxpayload=1280x1024
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "Reboot" {
insmod reboot
reboot
}
--------------------------------------------------------------------------------

======================= sdc1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
default /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  COM32R module (v4.xx)
 boot/syslinux/hdt.c32              :  COM32R module (v4.xx)
 boot/syslinux/ifplop.c32           :  COM32R module (v4.xx)
 boot/syslinux/menu.c32             :  COM32R module (v4.xx)
 boot/syslinux/reboot.c32           :  COM32R module (v4.xx)
 boot/syslinux/vesamenu.c32         :  COM32R module (v4.xx)

=========================== sde1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sde1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
# search path for the c32 support libraries (libcom32, libutil etc.)
path 
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sde1: Version of COM32(R) files used by Syslinux: ===============

 ldlinux.c32                        :  not a COM32/COM32R module
 syslinux/chain.c32                 :  not a COM32/COM32R module
 syslinux/gfxboot.c32               :  not a COM32/COM32R module
 syslinux/ldlinux.c32               :  not a COM32/COM32R module
 syslinux/libcom32.c32              :  not a COM32/COM32R module
 syslinux/libutil.c32               :  not a COM32/COM32R module
 syslinux/vesamenu.c32              :  not a COM32/COM32R module

========= Devices which don't seem to have a corresponding hard drive: =========

sdd 

=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 9 (/proc/2257/mounts) leaked on lvs invocation. Parent PID 9909: bash
File descriptor 63 (pipe:[29790]) leaked on lvs invocation. Parent PID 9909: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2018-11-27__15h59 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2257/mounts) leaked on lvs invocation. Parent PID 4674: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=(loop)/casper/vmlinuz.efi root=UUID=B4D3-5F76 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb2 : Error code 32

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sdb2:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/loop0: LABEL="Boot-Repair-Disk 64bit" TYPE="iso9660"
/dev/loop1: TYPE="squashfs"
/dev/sda1: UUID="04527d08-ad24-4128-ba5a-c0772410e875" TYPE="ext4"
/dev/sdb1: UUID="C087-AFE1" TYPE="vfat"
/dev/sdb2: UUID="507a5f33-8c7a-417e-8416-55ac4b2bd533" TYPE="ext4"
/dev/sdc1: LABEL="lili" UUID="B4D3-5F76" TYPE="vfat"
/dev/zram0: UUID="8b5127f2-d8c7-4258-9673-f35824d03879" TYPE="swap"
/dev/zram1: UUID="3f7c6174-04c5-4cd0-8a3f-fdf6e2d9cced" TYPE="swap"
/dev/zram2: UUID="b1ac0b19-b5bd-4cc1-92b6-681d9a9ff3ef" TYPE="swap"
/dev/zram3: UUID="f739f55e-8829-4894-bea3-c5b395ae0fbf" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount /dev/sdb2 : Error code 32
mount -r /dev/sdb2 /mnt/boot-sav/sdb2
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail  or so

mount -r /dev/sdb2 : Error code 32

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Boot file detected: /mnt/boot-sav/sdb1/EFI/Boot/fbx64.efi
=================== No kernel in /isodevice/boot:
grub
grub.exe
img
kexec-loader.lst
multisystem.bs.save
polices
splash
syslinux


/isodevice/boot/grub/menu.lst detected

efibootmgr -v
BootCurrent: 0003
Timeout: 0 seconds
BootOrder: 0002,2003,0001,2001,2002
Boot0000* EFI Network 0 for IPv4 (50-AF-73-61-9A-68) 	ACPI(a0341d0,0)PCI(1c,2)PCI(0,0)MAC(50af73619a68,0)IPv4(0.0.0.0:0<->0.0.0.0:0,0, 0RC
Boot0001* Ubuntu	HD(1,800,100000,adfb42c7-aa12-4b8f-85ec-26836d025194)File(EFIubuntugrubx64.efi)RC
Boot0002* ubuntu	HD(1,800,100000,adfb42c7-aa12-4b8f-85ec-26836d025194)File(EFIubuntushimx64.efi)
Boot0003* EFI USB Device (Generic Flash Disk)	ACPI(a0341d0,0)PCI(14,0)USB(0,0)HD(1,800,1f5d800,000767ac)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC
=================== UEFI/Legacy mode:
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdb2.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/isodevice.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	2048 sectors * 512 bytes
sdb	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA LITEONIT LSS-16L (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  16.0GB  16.0GB  primary  ext4


Model: ATA ST500LT012-9WS14 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size   File system  Name                  Flags
1      1049kB  538MB  537MB  fat32        EFI System Partition  boot
2      538MB   500GB  500GB  ext4


Model: Generic Flash Disk (scsi)
Disk /dev/sdc: 16.8GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  16.8GB  16.8GB  primary  fat32        boot



                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:16.0GB:scsi:512:512:msdos:ATA LITEONIT LSS-16L;
1:1049kB:16.0GB:16.0GB:ext4::;

BYT;
/dev/sdb:500GB:scsi:512:4096:gpt:ATA ST500LT012-9WS14;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot;
2:538MB:500GB:500GB:ext4::;

BYT;
/dev/sdc:16.8GB:scsi:512:512:msdos:Generic Flash Disk;
1:1049kB:16.8GB:16.8GB:fat32::boot;


                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /isodevice type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /cdrom type iso9660 (ro,noatime)
/dev/loop1 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 rts51x1 sda sda1 sdb sdb1 sdb2 sdc sdc1 sdd sg0 sg1 sg2 sg3 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sdb1/3:

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 e1 af 87 c0 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 10 20 00  |.X.SYSLINUX... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 08 00 00  |........ .@.....|
00000020  00 d8 f5 01 ac 3e 00 00  00 00 00 00 02 00 00 00  |.....>..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 76 5f d3 b4 6c  69 6c 69 20 20 20 20 20  |..)v_..lili     |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 b8 00 14 00 66 ba  |.t...F}.f.....f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 8a  |..........f.>...|
00000130  99 61 6c 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |.alut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.9G   17M  1.9G   1% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      385M  1.2M  384M   1% /run
/dev/sdc1      vfat        16G   11G  5.3G  67% /isodevice
/dev/loop0     iso9660    614M  614M     0 100% /cdrom
/dev/loop1     squashfs   549M  549M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G  8.0K  1.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.9G     0  1.9G   0% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      ext4        15G   38M   14G   1% /mnt/boot-sav/sda1
/dev/sdb1      vfat       511M  6.1M  505M   2% /mnt/boot-sav/sdb1

=================== fdisk -l:

Disk /dev/sda: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8dd18a5a

Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048    31277055    15637504   83  Linux

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1   976773167   488386583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdc: 16.8 GB, 16840130560 bytes
255 heads, 63 sectors/track, 2047 cylinders, total 32890880 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000767ac

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *        2048    32890879    16444416    b  W95 FAT32




=================== Suggested repair
The default repair of the Boot-Repair utility would restore the [(generic mbr)] MBR in sda, and make it boot on sdc1.
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems


=================== User settings
The settings chosen by the user will not act on the boot.

Hors ligne

#7 Le 27/11/2018, à 18:42

malbo

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Tu as fait le Boot-Info depuis une session live (démarrée sur cette saloperie de Boot-Repair-Disk qui est en version du 29nov2014, c'est à dire complètement obsolète). Cela n'a aucun intérêt. Ce que je t'ai demandé, c'est de faire le Boot-Info depuis une session sur ton Ubuntu fraîchement installé . Peux-tu le faire et donner l'URL du Boot-Info comme je t'ai demandé plutôt que de le coller toi-même ?

Hors ligne

#8 Le 27/11/2018, à 22:08

Dznet

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Désolé, mais j'ai du rendre le PC à son propriaitiare, vue que ça fait 3 jours qu'il etait sans portable.
Merci en tous cas pour ton aide précieuse.

Dz

Hors ligne

#9 Le 28/11/2018, à 07:52

malbo

Re : [Résolu] Grosse difficulté pour l'installation sur Lenovo ideapad s210

Dommage.
Pour le lecteur qui passe : dans le Boot-Info du post #6, on peut voir :

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

Ce qui est mentionné là est complètement faux. C'est parce que l'outil Boot-Repair-Disk utilisé par Dznet est une vieille version obsolète (*) qui ne sait pas détecter correctement une partition EXT4 qui est pourtant en parfaite santé puisque c'est la partition racine du Ubuntu installé. J'ai analysé ce dysfonctionnement de Boot-Repair-Disk en version du 2014-11-30 dans ce fil : Boot-Repair-Disk est obsolète pour Ubuntu 16.10

(*) on peut lire dans le Boot-Info du post #6 :

boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)

Dernière modification par malbo (Le 28/11/2018, à 07:55)

Hors ligne