Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 02/10/2018, à 12:05

katian

[RESOLU] anomalie tail: les ressources inotify sont épuisées

Bonjour,

tail me donne ce message :

desktop-core-i5-3570K:~$ tail -f /var/log/syslog
Oct  2 12:53:15 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 29 to 30
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdc [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 75 to 71
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 25 to 29
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 104 to 105
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 70 to 67
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 30 to 33
Oct  2 13:02:54 katian-desktop-core-i5-3570K mateweather-app[2112]: Source ID 1385 was not found when attempting to remove it
Oct  2 13:03:36 katian-desktop-core-i5-3570K systemd[1]: Started Run anacron jobs.
Oct  2 13:03:36 katian-desktop-core-i5-3570K anacron[20284]: Anacron 2.3 started on 2018-10-02
Oct  2 13:03:36 katian-desktop-core-i5-3570K anacron[20284]: Normal exit (0 jobs run)
tail: les ressources inotify sont épuisées
tail: impossible d'utiliser inotify, retour à l'interrogation active

j'ai trouvé différentes réponses sur le net mais comment être sur de la bonne manip pour résoudre ça ? Je préfère poster ici cela pourra en aider d'autres

Dernière modification par katian (Le 06/10/2018, à 13:40)


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#2 Le 02/10/2018, à 12:40

LukePerp

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Bonjour, il y a peut être une coquille dans les paquets. Passes ces commandes permettant de réparer, nettoyer et de mettre à jour, en une ligne. Peux tu ouvrir le terminal et donner le retour :

sudo dpkg --configure -a ; sudo apt install -fy ; sudo apt autoclean ; sudo apt autoremove --purge -y ; sudo apt update ; sudo apt full-upgrade -y

Desktop : Ubuntu Mate 18.04 - Intel i5 - 8 Go - Dual boot Windows 7 pour jouer
Laptop ASUS : Ubuntu Mate 16.04 - Intel i3 - 4 Go
Vieux laptop de 1993 : Bodhi Linux - Pentium M - 432 Mo

Hors ligne

#3 Le 02/10/2018, à 15:21

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

voici :

laurent@katian-desktop-core-i5-3570K:~$ sudo dpkg --configure -a ; sudo apt install -fy ; sudo apt autoclean ; sudo apt autoremove --purge -y ; sudo apt update ; sudo apt full-upgrade -y
[sudo] Mot de passe de laurent : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Del firefox-locale-en 62.0+build2-0ubuntu0.18.04.3 [942 kB]
Del firefox-locale-fr 62.0+build2-0ubuntu0.18.04.3 [442 kB]
Del chromium-codecs-ffmpeg-extra 68.0.3440.106-0ubuntu0.18.04.1 [1103 kB]
Del libglib2.0-0 2.56.2-0ubuntu0.18.04.1 [1234 kB]
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Atteint:1 http://fr.archive.ubuntu.com/ubuntu bionic InRelease
Réception de:2 http://fr.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]           
Réception de:3 http://security.ubuntu.com/ubuntu bionic-security InRelease [83,2 kB]            
Réception de:4 http://fr.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]                               
Réception de:5 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [393 kB]                        
Réception de:6 http://security.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [204 B]
Réception de:7 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [354 kB]                       
Réception de:8 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [6824 B]
Réception de:9 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 48x48 Icons [9088 B]
Réception de:10 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 64x64 Icons [11,3 kB]
Réception de:11 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [170 kB]
Réception de:12 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [40,8 kB]
Réception de:13 http://fr.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [76,7 kB]
Réception de:14 http://fr.archive.ubuntu.com/ubuntu bionic-updates/restricted i386 Packages [3600 B]
Réception de:15 http://fr.archive.ubuntu.com/ubuntu bionic-updates/restricted amd64 Packages [3644 B]
Réception de:16 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [550 kB]
Réception de:17 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [550 kB]
Réception de:18 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [183 kB]
Réception de:19 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [177 kB]
Réception de:20 http://fr.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [294 kB]
Réception de:21 http://fr.archive.ubuntu.com/ubuntu bionic-updates/multiverse i386 Packages [5540 B]
Réception de:22 http://fr.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 Packages [5388 B]
Réception de:23 http://fr.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2468 B]
Réception de:24 http://fr.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [5104 B]
3089 ko réceptionnés en 4s (718 ko/s)            
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#4 Le 02/10/2018, à 20:45

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

L'anomalie ne semble plus apparaître... des ressources inotify ont dut êtres libérées wink


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#5 Le 02/10/2018, à 20:52

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

je retrouve des éléments communs sur un soucis Visual Studio Code
https://code.visualstudio.com/docs/setu … ror-enospc

laurent@katian-desktop-core-i5-3570K:~$ cat /proc/sys/fs/inotify/max_user_watches
8192

La solution, éditer /etc/sysctl.conf et ajouter

fs.inotify.max_user_watches=524288

à ce fichier


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#6 Le 02/10/2018, à 21:22

Naziel

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Oct  2 12:53:15 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 29 to 30
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdc [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 75 to 71
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 25 to 29
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 104 to 105
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 70 to 67
Oct  2 12:53:16 katian-desktop-core-i5-3570K smartd[1120]: Device: /dev/sdd [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 30 to 33

Fais un rapport smart!

Hors ligne

#7 Le 03/10/2018, à 05:42

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

désolé Naziel, je ne suis pas sûr d'avoir saisi ta réponse hmm


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#8 Le 03/10/2018, à 07:18

Naziel

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Les lignes que j'ai indiqué montrent que des attributs smart ont changé, ça concerne 3 disques dur. Il faudrait faire un rapport smart de ces 3 disques pour savoir s'ils vont bien (notamment si la température est raisonnable)
smart est visiblement activé donc tu peux donner les retours de

sudo smartctl -s on -a /dev/sda
sudo smartctl -s on -a /dev/sdb
sudo smartctl -s on -a /dev/sdc
sudo smartctl -s on -a /dev/sdd

Hors ligne

#9 Le 03/10/2018, à 11:37

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#10 Le 03/10/2018, à 12:28

Naziel

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Je le copie ici afin de ne pas perdre ces infos dans 6 jours

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OCZ-VERTEX3
Serial Number:    OCZ-Y1Y5CGR275E1AETR
LU WWN Device Id: 5 e83a97 eb796d623
Firmware Version: 2.15
User Capacity:    60022480896 bytes [60,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Oct  3 12:35:02 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 2097) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0021)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   092   092   050    Pre-fail  Always       -       0/131642899
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   066   066   000    Old_age   Always       -       30379h+33m+50.310s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       622
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       143
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       5
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   030   000    Old_age   Always       -       30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/131642899
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/131642899
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/131642899
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       11630
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       42760
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       42760
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       10455

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST2000DM006-2DM164
Serial Number:    Z560RKK9
LU WWN Device Id: 5 000c50 0b05a553b
Firmware Version: CC26
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Oct  3 12:36:09 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   80) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 216) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   107   099   006    Pre-fail  Always       -       14207472
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       31
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   077   060   030    Pre-fail  Always       -       51779526
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       3139
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       31
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   059   045    Old_age   Always       -       30 (Min/Max 29/39)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       19
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       41
194 Temperature_Celsius     0x0022   030   041   000    Old_age   Always       -       30 (0 24 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       3140 (39 85 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       16723238224
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       163244609023

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 23
Device Model:     STM3250318AS
Serial Number:    9VM6PS8H
LU WWN Device Id: 5 000c50 019f676bb
Firmware Version: CC38
User Capacity:    250059350016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Oct  3 12:36:28 2018 CEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213911en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  625) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  49) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   112   099   006    Pre-fail  Always       -       43966759
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2453
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   047   045   030    Pre-fail  Always       -       34123962941109
  9 Power_On_Hours          0x0032   051   051   000    Old_age   Always       -       43388
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1191
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       274
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   056   045    Old_age   Always       -       27 (Min/Max 25/38)
194 Temperature_Celsius     0x0022   027   044   000    Old_age   Always       -       27 (0 4 0 0 0)
195 Hardware_ECC_Recovered  0x001a   029   027   000    Old_age   Always       -       43966759
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   197   000    Old_age   Always       -       12
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       46165 (227 177 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3407567685
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2551522689

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     29171         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdd
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3320620AS
Serial Number:    9QF2YHWQ
Firmware Version: 3.AAE
User Capacity:    320072933376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Wed Oct  3 12:36:41 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 115) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   073   006    Pre-fail  Always       -       8238403
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1475
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       280108353
  9 Power_On_Hours          0x0032   041   041   000    Old_age   Always       -       52405
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1564
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   056   045    Old_age   Always       -       31 (Min/Max 29/44)
194 Temperature_Celsius     0x0022   031   044   000    Old_age   Always       -       31 (0 8 0 0 0)
195 Hardware_ECC_Recovered  0x001a   059   054   000    Old_age   Always       -       216961330
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     39985         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Je vais laisser des personnes plus compétentes donner leur avis dessus, je sais pas si Seek_Error_Rate est trop élevé sur le disque sdc et sdd, mais après ça fait pas mal d'heures qu'ils tournent, donc c'est peut être aussi normal

Dernière modification par Naziel (Le 03/10/2018, à 12:29)

Hors ligne

#11 Le 03/10/2018, à 12:31

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

merci Naziel

pour info smart-notifier est installé

laurent@katian-desktop-core-i5-3570K:~/Vidéos$ ps aux | grep notifier
laurent   1931  0.0  0.1 595756 11540 ?        Sl   oct.01   0:02 update-notifier
laurent   1952  0.0  0.2 532012 19480 ?        Sl   oct.01   0:00 /usr/bin/python /usr/bin/smart-notifier
laurent  29901  0.0  0.0  21536  1156 pts/2    S+   13:30   0:00 grep --color=auto notifier

Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#12 Le 05/10/2018, à 06:05

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

$ echo fs.inotify.max_user_watches=16384 | sudo tee -a /etc/sysctl.conf

j'ai doublé le max_user_watches, à suivre...


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#13 Le 05/10/2018, à 07:17

bruno

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Hors ligne

#14 Le 05/10/2018, à 11:47

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

merci Bruno !

j'utilise ce projet : https://github.com/Microsoft/vscode et avec de forts préjugés je le soupçonne d’être consommateur de ressources roll

il fait partie du résultat de la commande

ps -p $(find /proc/*/fd/* -type l -lname 'anon_inode:inotify' -print 2> /dev/null | sed -e 's/^\/proc\/\([0-9]*\)\/.*/\1/')

trouvée ici :

Dernière modification par katian (Le 05/10/2018, à 11:48)


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#15 Le 06/10/2018, à 08:24

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Le soucis se présente encore, modification en conséquence :

laurent@katian-desktop-core-i5-3570K:/etc$ tail /etc/sysctl.conf
# Debian kernels have both set to 1 (restricted) 
# See https://www.kernel.org/doc/Documentation/sysctl/fs.txt
#fs.protected_hardlinks=0
#fs.protected_symlinks=0


#fs.inotify.max_user_watches=16384
fs.inotify.max_user_watches=32768

Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#16 Le 06/10/2018, à 08:35

bruno

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Si le souci vient de cette bouse de VSCode (probable si cela embarque MonoDevelop), il vaudrait mieux ne pas l'utiliser que de modifier cette valeur au delà du raisonnable.
Ce ne sont pas les bons éditeurs de code qui manquent sous GNU/Linux.

Dernière modification par bruno (Le 06/10/2018, à 08:35)

Hors ligne

#17 Le 06/10/2018, à 08:55

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

c'est pas faux bruno, je reprends ma recherche d'un bon éditeur


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#18 Le 06/10/2018, à 09:04

bruno

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

À moins bien sûr que tu aies réellement besoin d'utiliser celui-là.
Personnellement les outils de base me suffisent amplement pour le code :  kate ou kdevelop (je suis sous KDE) en mode graphique.

Hors ligne

#19 Le 06/10/2018, à 09:21

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

je regarde du coté d'Atom https://atom.io/

il me faut éditeur + snippets + gestion git dans l'idéal

c'est pour du dev php & js


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#20 Le 06/10/2018, à 13:37

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Le projet Atom est très satisfaisant https://github.com/atom/atom

je vire ma modif du

fs.inotify.max_user_watches

au revoir vscode !


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne

#21 Le 11/10/2018, à 09:51

moko138

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

Naziel a écrit :

Je le copie ici afin de ne pas perdre ces infos dans 6 jours
Je vais laisser des personnes plus compétentes donner leur avis dessus, je sais pas si Seek_Error_Rate est trop élevé sur le disque sdc et sdd, mais après ça fait pas mal d'heures qu'ils tournent, donc c'est peut être aussi normal

Merci Naziel, sans ton initiative ces 4 retours étonnants auraient été perdus !

Je les sépare pour leur donner de la lisibilité.

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OCZ-VERTEX3
Serial Number:    OCZ-Y1Y5CGR275E1AETR
LU WWN Device Id: 5 e83a97 eb796d623
Firmware Version: 2.15
User Capacity:    60022480896 bytes [60,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Oct  3 12:35:02 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 2097) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0021)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   092   092   050    Pre-fail  Always       -       0/131642899
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   066   066   000    Old_age   Always       -       30379h+33m+50.310s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       622
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       143
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       5
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   030   000    Old_age   Always       -       30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/131642899
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/131642899
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/131642899
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       11630
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       42760
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       42760
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       10455

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

======================

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST2000DM006-2DM164
Serial Number:    Z560RKK9
LU WWN Device Id: 5 000c50 0b05a553b
Firmware Version: CC26
User Capacity:    2000398934016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Oct  3 12:36:09 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   80) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 216) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   107   099   006    Pre-fail  Always       -       14207472
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       31
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   077   060   030    Pre-fail  Always       -       51779526
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       3139
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       31
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   059   045    Old_age   Always       -       30 (Min/Max 29/39)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       19
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       41
194 Temperature_Celsius     0x0022   030   041   000    Old_age   Always       -       30 (0 24 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       3140 (39 85 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       16723238224
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       163244609023

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

======================

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 23
Device Model:     STM3250318AS
Serial Number:    9VM6PS8H
LU WWN Device Id: 5 000c50 019f676bb
Firmware Version: CC38
User Capacity:    250059350016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Oct  3 12:36:28 2018 CEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213911en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  625) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  49) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   112   099   006    Pre-fail  Always       -       43966759
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2453
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   047   045   030    Pre-fail  Always       -       34123962941109
  9 Power_On_Hours          0x0032   051   051   000    Old_age   Always       -       43388
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1191
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       274
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   056   045    Old_age   Always       -       27 (Min/Max 25/38)
194 Temperature_Celsius     0x0022   027   044   000    Old_age   Always       -       27 (0 4 0 0 0)
195 Hardware_ECC_Recovered  0x001a   029   027   000    Old_age   Always       -       43966759
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   197   000    Old_age   Always       -       12
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       46165 (227 177 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3407567685
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2551522689

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     29171         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

43.388 heures à 7.200 rpm pour ce
Seagate Maxtor DiamondMax 23  /  STM3250318AS, soit
plus de 18,7 milliards de tours !


======================

katian-desktop-core-i5-3570K:~$ sudo smartctl -s on -a /dev/sdd
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3320620AS
Serial Number:    9QF2YHWQ
Firmware Version: 3.AAE
User Capacity:    320072933376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Wed Oct  3 12:36:41 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 115) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   073   006    Pre-fail  Always       -       8238403
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1475
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       280108353
  9 Power_On_Hours          0x0032   041   041   000    Old_age   Always       -       52405
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1564
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   056   045    Old_age   Always       -       31 (Min/Max 29/44)
194 Temperature_Celsius     0x0022   031   044   000    Old_age   Always       -       31 (0 8 0 0 0)
195 Hardware_ECC_Recovered  0x001a   059   054   000    Old_age   Always       -       216961330
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     39985         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

52.405 heures pour ce
Seagate Maxtor DiamondMax 21  /   MAXTOR STM3320620AS qui est lui aussi un 7.200 rpm
(cf. https://www.seagate.com/staticfiles/support/disc/manuals/maxtor/100451230c.pdf )
ça nous fait plus de 22,6 milliards de rotations...

On est dans les records, là !

= =

Et pour les 4 disques, Current_Pending_Sector  et  Offline_Uncorrectable à zéro !

= =


On voit - bravo katian ! - que ces quatre disques ont été bichonnés smile :

- Pas de choc en fonctionnement : G-Sense_Error_Rate à zéro (pour le seul disque incluant cette info dans ses données recueillies, mais comme les 4 disques sont dans une tour, ils sont solidaiires) ;
- températures maîtrisées (44°C maximum) ;
- très peu de démarrages ou de redémarrages, sorties de veille comprises !

Voilà comment on fait durer ses disques.  smile


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#22 Le 11/10/2018, à 12:23

katian

Re : [RESOLU] anomalie tail: les ressources inotify sont épuisées

merci pour le compliment moko138 big_smile

j'essaie de faire de mon mieux wink


Ubuntu MATE 18.10.1 - Ubuntu fan depuis la 8.04
dev C++ :D
https://t.me/katian_dev

Hors ligne