Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/08/2018, à 11:57

Nex_plus_ultra

Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Bonjour tout le monde,

Aujourd'hui, j'ai effectué la mise a niveau d'Ubuntu 18.04.1 LTS, mais depuis, j'ai ce message qui s'affiche au debut du boot :

[    0.004000] do_IRQ: 1.55 No irq handler for vector
gave up waiting for supend/resume device
/dev/sda6: clean, 201150/8486912 files...

Et il liste tous les périphériques (ce que je ne voyais pas avant), puis il démarre mais avec le curseur de la souris vers la droite (et pas au centre comme d'habitude)..

Voila si quelqu'un pouvait m'aider, ce serait bien sympa car j'ai aucune idée pour resoudre ce probleme, si besoin de connaitre ma config je donnerai volontiers tous les retours de commande^^

Dans l'attente de vos lumieres

Edit: voila ce que donne dmesg

mckl@Compaq-CQ58-Notebook-PC:~$ dmesg
[    0.000000] Linux version 4.15.0-30-generic (buildd@lgw01-amd64-060) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #32-Ubuntu SMP Thu Jul 26 17:42:43 UTC 2018 (Ubuntu 4.15.0-30.32-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=42d5c988-a60f-42c7-93f5-1c81e366aafc ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df8befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df8bf000-0x00000000dfabefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard Compaq CQ58 Notebook PC/1885, BIOS F.27 09/17/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DFBBC000 mask FFFFFF000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000011f000000 aka 4592M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x7513f000, 0x7513ffff] PGTABLE
[    0.000000] BRK [0x75140000, 0x75140fff] PGTABLE
[    0.000000] BRK [0x75141000, 0x75141fff] PGTABLE
[    0.000000] BRK [0x75142000, 0x75142fff] PGTABLE
[    0.000000] BRK [0x75143000, 0x75143fff] PGTABLE
[    0.000000] BRK [0x75144000, 0x75144fff] PGTABLE
[    0.000000] BRK [0x75145000, 0x75145fff] PGTABLE
[    0.000000] BRK [0x75146000, 0x75146fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31649000-0x34b1bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000DFBFE120 00007C (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 0x00000000DFBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 0x00000000DFBE7000 0102E9 (v01 HPQOEM 1885     F0000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000DFB8A000 000040
[    0.000000] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x00000000DFBFB000 000038 (v01 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: APIC 0x00000000DFBFA000 000084 (v03 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x00000000DFBF9000 00003C (v01 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: ASF! 0x00000000DFBF8000 0000A5 (v32 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: BOOT 0x00000000DFBE6000 000028 (v01 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x00000000DFBE4000 000044 (v01 HPQOEM 1885     00000001 HP   00040000)
[    0.000000] ACPI: MSDM 0x00000000DFBE3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x00000000DFBE2000 0003DE (v01 HPQOEM 1885     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000DFBE0000 0016E4 (v02 HPQOEM 1885     00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x106fd5000-0x106ffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000106ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df8befff]
[    0.000000]   node   0: [mem 0x00000000dfbff000-0x00000000dfbfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000106ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000106ffffff]
[    0.000000] On node 0 totalpages: 944222
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14243 pages used for memmap
[    0.000000]   DMA32 zone: 911552 pages, LIFO batch:31
[    0.000000]   Normal zone: 448 pages used for memmap
[    0.000000]   Normal zone: 28672 pages, LIFO batch:7
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf8bf000-0xdfabefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 929446
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=42d5c988-a60f-42c7-93f5-1c81e366aafc ro quiet splash
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3568456K/3776888K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 208432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 39093 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1397.354 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.70 BogoMIPS (lpj=5589416)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.029751] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031166] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031270] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031316] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031907] CPU: Physical Processor ID: 0
[    0.031911] CPU: Processor Core ID: 0
[    0.031914] mce: CPU supports 6 MCE banks
[    0.031932] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.031935] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.031940] Spectre V2 : Mitigation: Full AMD retpoline
[    0.031942] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.031944] Speculative Store Bypass: Vulnerable
[    0.034919] Freeing SMP alternatives memory: 36K
[    0.044000] smpboot: CPU0: AMD E1-1200 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[    0.044000] Performance Events: AMD PMU driver.
[    0.044000] ... version:                0
[    0.044000] ... bit width:              48
[    0.044000] ... generic registers:      4
[    0.044000] ... value mask:             0000ffffffffffff
[    0.044000] ... max period:             00007fffffffffff
[    0.044000] ... fixed-purpose events:   0
[    0.044000] ... event mask:             000000000000000f
[    0.044000] Hierarchical SRCU implementation.
[    0.044000] smp: Bringing up secondary CPUs ...
[    0.044000] x86: Booting SMP configuration:
[    0.044000] .... node  #0, CPUs:      #1
[    0.049283] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.004000] do_IRQ: 1.55 No irq handler for vector
[    0.052171] smp: Brought up 1 node, 2 CPUs
[    0.052171] smpboot: Max logical packages: 2
[    0.052171] smpboot: Total of 2 processors activated (5589.41 BogoMIPS)
[    0.052910] devtmpfs: initialized
[    0.052910] x86/mm: Memory block size: 128MB
[    0.053314] evm: security.selinux
[    0.053316] evm: security.SMACK64
[    0.053317] evm: security.SMACK64EXEC
[    0.053319] evm: security.SMACK64TRANSMUTE
[    0.053320] evm: security.SMACK64MMAP
[    0.053321] evm: security.apparmor
[    0.053323] evm: security.ima
[    0.053324] evm: security.capability
[    0.053486] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes)
[    0.053486] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.053486] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.053486] pinctrl core: initialized pinctrl subsystem
[    0.053486] RTC time: 11:26:56, date: 08/14/18
[    0.053486] NET: Registered protocol family 16
[    0.053486] audit: initializing netlink subsys (disabled)
[    0.056116] audit: type=2000 audit(1534246016.056:1): state=initialized audit_enabled=0 res=1
[    0.056462] cpuidle: using governor ladder
[    0.056462] cpuidle: using governor menu
[    0.056462] Simple Boot Flag at 0x44 set to 0x1
[    0.056462] ACPI: bus type PCI registered
[    0.056462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.056470] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.056486] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.056486] PCI: Using configuration type 1 for base access
[    0.056492] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.056492] mtrr: probably your BIOS does not setup all CPUs.
[    0.056492] mtrr: corrected configuration.
[    0.060171] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.060171] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.060264] ACPI: Added _OSI(Module Device)
[    0.060267] ACPI: Added _OSI(Processor Device)
[    0.060269] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.060271] ACPI: Added _OSI(Processor Aggregator Device)
[    0.060274] ACPI: Added _OSI(Linux-Dell-Video)
[    0.064245] ACPI: Executed 1 blocks of module-level executable AML code
[    0.082073] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.088227] ACPI: EC: EC started
[    0.088229] ACPI: EC: interrupt blocked
[    0.101739] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.101747] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.101752] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.101753] ACPI: Interpreter enabled
[    0.101822] ACPI: (supports S0 S3 S4 S5)
[    0.101826] ACPI: Using IOAPIC for interrupt routing
[    0.102727] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.103467] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.127415] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.127433] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.128415] acpi PNP0A08:00: _OSC: platform does not support [PME PCIeCapability]
[    0.128839] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.128845] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.128848] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug AER]
[    0.128853] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.128893] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.129233] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.129992] PCI host bridge to bus 0000:00
[    0.129997] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.130001] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.130005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.130008] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.130012] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.130015] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.130019] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.130022] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.130025] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.130029] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.130032] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.130036] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.130039] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.130042] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.130046] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.130049] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.130053] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.130057] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.130076] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.130380] pci 0000:00:01.0: [1002:9809] type 00 class 0x030000
[    0.130403] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.130414] pci 0000:00:01.0: reg 0x14: [io  0x3000-0x30ff]
[    0.130424] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[    0.130457] pci 0000:00:01.0: enabling Extended Tags
[    0.130510] pci 0000:00:01.0: supports D1 D2
[    0.130761] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.130783] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[    0.130827] pci 0000:00:01.1: enabling Extended Tags
[    0.130877] pci 0000:00:01.1: supports D1 D2
[    0.131204] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.131233] pci 0000:00:11.0: reg 0x10: [io  0x3118-0x311f]
[    0.131247] pci 0000:00:11.0: reg 0x14: [io  0x3124-0x3127]
[    0.131260] pci 0000:00:11.0: reg 0x18: [io  0x3110-0x3117]
[    0.131272] pci 0000:00:11.0: reg 0x1c: [io  0x3120-0x3123]
[    0.131285] pci 0000:00:11.0: reg 0x20: [io  0x3100-0x310f]
[    0.131299] pci 0000:00:11.0: reg 0x24: [mem 0xf034c000-0xf034c7ff]
[    0.131886] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.131911] pci 0000:00:12.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[    0.132328] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.133054] pci 0000:00:12.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[    0.135139] pci 0000:00:12.2: supports D1 D2
[    0.135143] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.135470] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.135839] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.135872] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[    0.135965] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.136301] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.136672] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.137052] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[    0.137108] pci 0000:00:15.0: enabling Extended Tags
[    0.137179] pci 0000:00:15.0: supports D1 D2
[    0.137514] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[    0.137568] pci 0000:00:15.1: enabling Extended Tags
[    0.137635] pci 0000:00:15.1: supports D1 D2
[    0.137973] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
[    0.138027] pci 0000:00:15.3: enabling Extended Tags
[    0.138097] pci 0000:00:15.3: supports D1 D2
[    0.138430] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[    0.138456] pci 0000:00:16.0: reg 0x10: [mem 0xf0349000-0xf0349fff]
[    0.138820] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[    0.139518] pci 0000:00:16.2: reg 0x10: [mem 0xf0348000-0xf03480ff]
[    0.141589] pci 0000:00:16.2: supports D1 D2
[    0.141592] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.141920] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.142195] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.142463] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.142730] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.143009] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.143279] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.143550] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.143818] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.144358] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.144373] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.144377] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.144381] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.144385] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.144388] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.144392] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.144395] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.144399] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.144402] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.144406] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.144410] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.144413] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.144417] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.144420] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.144424] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.144428] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
[    0.144431] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
[    0.144625] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[    0.144665] pci 0000:02:00.0: reg 0x10: [mem 0xf0200000-0xf0200fff]
[    0.144848] pci 0000:02:00.0: supports D1 D2
[    0.144852] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.156177] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.156195] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.156435] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.156479] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.156518] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.156542] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.156687] pci 0000:03:00.0: supports D1 D2
[    0.156691] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168176] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.168190] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.168203] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.180007] pci 0000:04:00.0: [1814:3290] type 00 class 0x028000
[    0.195370] pci 0000:04:00.0: reg 0x10: [mem 0xf0110000-0xf011ffff]
[    0.251398] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.281714] pci 0000:04:00.1: [1814:3298] type 00 class 0x0d1100
[    0.301653] pci 0000:04:00.1: reg 0x10: [mem 0xf0100000-0xf010ffff]
[    0.336066] pci 0000:04:00.1: supports D1
[    0.336070] pci 0000:04:00.1: PME# supported from D0 D1 D3hot
[    0.379523] pci 0000:00:15.3: PCI bridge to [bus 04]
[    0.379541] pci 0000:00:15.3:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.383277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.383592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.383930] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.384302] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.384588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.384910] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.385232] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.385553] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.386469] ACPI: EC: interrupt unblocked
[    0.386538] ACPI: EC: event unblocked
[    0.386549] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.386553] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.387208] SCSI subsystem initialized
[    0.387346] libata version 3.00 loaded.
[    0.387346] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.387346] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.387346] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.387346] vgaarb: loaded
[    0.387346] ACPI: bus type USB registered
[    0.387346] usbcore: registered new interface driver usbfs
[    0.387346] usbcore: registered new interface driver hub
[    0.388021] usbcore: registered new device driver usb
[    0.388232] EDAC MC: Ver: 3.0.0
[    0.388474] PCI: Using ACPI for IRQ routing
[    0.390618] PCI: pci_cache_line_size set to 64 bytes
[    0.390731] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.390735] e820: reserve RAM buffer [mem 0xdf8bf000-0xdfffffff]
[    0.390737] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
[    0.390740] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff]
[    0.392047] NetLabel: Initializing
[    0.392049] NetLabel:  domain hash size = 128
[    0.392050] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.392091] NetLabel:  unlabeled traffic allowed by default
[    0.392196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.392196] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.394269] clocksource: Switched to clocksource hpet
[    0.426481] VFS: Disk quotas dquot_6.6.0
[    0.426533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.426855] AppArmor: AppArmor Filesystem Enabled
[    0.426938] pnp: PnP ACPI init
[    0.427460] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.427465] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.427481] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.428127] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.428276] system 00:02: [io  0x0400-0x04cf] has been reserved
[    0.428280] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.428284] system 00:02: [io  0x04d6] has been reserved
[    0.428288] system 00:02: [io  0x0680-0x06ff] has been reserved
[    0.428292] system 00:02: [io  0x077a] has been reserved
[    0.428296] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.428300] system 00:02: [io  0x0c14] has been reserved
[    0.428303] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.428307] system 00:02: [io  0x0c6c] has been reserved
[    0.428311] system 00:02: [io  0x0c6f] has been reserved
[    0.428315] system 00:02: [io  0x0cd0-0x0cdb] has been reserved
[    0.428318] system 00:02: [io  0x0840-0x0847] has been reserved
[    0.428330] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.428608] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.428613] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved
[    0.428625] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.430002] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.430072] pnp 00:05: Plug and Play ACPI device, IDs SYN1e70 SYN1e00 SYN0002 PNP0f13 (active)
[    0.431762] pnp: PnP ACPI: found 6 devices
[    0.446000] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.446078] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.446099] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.446107] pci 0000:00:15.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.446119] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.446123] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.446133] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.446143] pci 0000:00:15.3: PCI bridge to [bus 04]
[    0.446150] pci 0000:00:15.3:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.446167] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.446170] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.446174] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.446177] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.446181] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.446184] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.446188] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.446191] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.446194] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.446198] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.446201] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.446204] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.446208] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.446211] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.446215] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
[    0.446218] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.446222] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
[    0.446226] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.446229] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.446232] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.446236] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.446239] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.446242] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.446246] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.446249] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.446252] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.446256] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.446259] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.446262] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.446266] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.446269] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff window]
[    0.446272] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff window]
[    0.446276] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.446279] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff window]
[    0.446283] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.446287] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.446290] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.446294] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.446616] NET: Registered protocol family 2
[    0.447166] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.447408] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.447708] TCP: Hash tables configured (established 32768 bind 32768)
[    0.447898] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.447955] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.448239] NET: Registered protocol family 1
[    0.448282] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.000715] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    1.100701] pci 0000:00:16.2: PME# does not work under D3, disabling it
[    1.100830] PCI: CLS 64 bytes, default 64
[    1.100963] Unpacking initramfs...
[    3.088739] Freeing initrd memory: 54092K
[    3.088985] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.088997] software IO TLB [mem 0xdb8bf000-0xdf8bf000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    3.089080] LVT offset 0 assigned for vector 0x400
[    3.089335] perf: AMD IBS detected (0x000000ff)
[    3.089529] Scanning for low memory corruption every 60 seconds
[    3.091345] Initialise system trusted keyrings
[    3.091374] Key type blacklist registered
[    3.091792] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    3.095323] zbud: loaded
[    3.096679] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.097632] fuse init (API version 7.26)
[    3.104176] Key type asymmetric registered
[    3.104180] Asymmetric key parser 'x509' registered
[    3.104335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    3.104527] io scheduler noop registered
[    3.104531] io scheduler deadline registered
[    3.104727] io scheduler cfq registered (default)
[    3.110099] ACPI: AC Adapter [AC] (on-line)
[    3.110171] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.110316] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    3.110338] ACPI: Lid Switch [LID]
[    3.110475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    3.110531] ACPI: Power Button [PWRB]
[    3.110618] pci_bus 0000:02: Allocating resources
[    3.110621] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.110647] pcieport 0000:00:15.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    3.110654] pcieport 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    3.110667] pci_bus 0000:03: Allocating resources
[    3.110685] pcieport 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
[    3.110698] pci_bus 0000:04: Allocating resources
[    3.110719] pcieport 0000:00:15.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    3.110724] pcieport 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    3.110772] pcieport 0000:00:15.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    3.110784] pcieport 0000:00:15.1: BAR 14: assigned [mem 0xf0600000-0xf09fffff]
[    3.110810] pcieport 0000:00:15.3: BAR 15: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref]
[    3.110818] pcieport 0000:00:15.0: BAR 13: assigned [io  0x1000-0x1fff]
[    3.110824] pcieport 0000:00:15.3: BAR 13: assigned [io  0x4000-0x4fff]
[    3.110834] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.112275] ACPI: Power Button [PWRF]
[    3.113027] pci_bus 0000:01: Allocating resources
[    3.113044] pci 0000:00:14.4: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    3.113051] pci 0000:00:14.4: bridge window [mem 0x00100000-0x000fffff pref] to [bus 01] add_size 200000 add_align 100000
[    3.113056] pci 0000:00:14.4: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    3.113090] pci 0000:00:14.4: BAR 14: assigned [mem 0xf0c00000-0xf0dfffff]
[    3.113104] pci 0000:00:14.4: BAR 15: assigned [mem 0xf0e00000-0xf0ffffff pref]
[    3.113112] pci 0000:00:14.4: BAR 13: assigned [io  0x5000-0x5fff]
[    3.113125] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.113166] pci 0000:00:14.4:   bridge window [io  0x5000-0x5fff]
[    3.113174] pci 0000:00:14.4:   bridge window [mem 0xf0c00000-0xf0dfffff]
[    3.113180] pci 0000:00:14.4:   bridge window [mem 0xf0e00000-0xf0ffffff pref]
[    3.113483] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.113488] pci 0000:00:14.4:   bridge window [io  0x5000-0x5fff]
[    3.113496] pci 0000:00:14.4:   bridge window [mem 0xf0c00000-0xf0dfffff]
[    3.113503] pci 0000:00:14.4:   bridge window [mem 0xf0e00000-0xf0ffffff pref]
[    3.113606] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.113611] pci 0000:00:14.4:   bridge window [io  0x5000-0x5fff]
[    3.113619] pci 0000:00:14.4:   bridge window [mem 0xf0c00000-0xf0dfffff]
[    3.113625] pci 0000:00:14.4:   bridge window [mem 0xf0e00000-0xf0ffffff pref]
[    3.115010] pci 0000:00:14.4: PCI bridge to [bus 01]
[    3.115051] pci 0000:00:14.4:   bridge window [io  0x5000-0x5fff]
[    3.115059] pci 0000:00:14.4:   bridge window [mem 0xf0c00000-0xf0dfffff]
[    3.115066] pci 0000:00:14.4:   bridge window [mem 0xf0e00000-0xf0ffffff pref]
[    3.118619] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.120220] thermal LNXTHERM:00: registered as thermal_zone0
[    3.120223] ACPI: Thermal Zone [TSZ0] (64 C)
[    3.120634] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.120911] ACPI: Battery Slot [BAT0] (battery absent)
[    3.133308] Linux agpgart interface v0.103
[    3.139480] loop: module loaded
[    3.139983] libphy: Fixed MDIO Bus: probed
[    3.139986] tun: Universal TUN/TAP device driver, 1.6
[    3.140301] PPP generic driver version 2.4.2
[    3.140448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.140459] ehci-pci: EHCI PCI platform driver
[    3.140923] QUIRK: Enable AMD PLL fix
[    3.141009] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.141024] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.141034] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.141083] ehci-pci 0000:00:12.2: debug port 1
[    3.141163] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034a000
[    3.156349] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.156528] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.156533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.156536] usb usb1: Product: EHCI Host Controller
[    3.156539] usb usb1: Manufacturer: Linux 4.15.0-30-generic ehci_hcd
[    3.156542] usb usb1: SerialNumber: 0000:00:12.2
[    3.157185] hub 1-0:1.0: USB hub found
[    3.157206] hub 1-0:1.0: 5 ports detected
[    3.158148] ehci-pci 0000:00:16.2: EHCI Host Controller
[    3.158162] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2
[    3.158171] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.158223] ehci-pci 0000:00:16.2: debug port 1
[    3.158279] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000
[    3.172308] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    3.172454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.172458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.172462] usb usb2: Product: EHCI Host Controller
[    3.172466] usb usb2: Manufacturer: Linux 4.15.0-30-generic ehci_hcd
[    3.172469] usb usb2: SerialNumber: 0000:00:16.2
[    3.173093] hub 2-0:1.0: USB hub found
[    3.173114] hub 2-0:1.0: 4 ports detected
[    3.173555] ehci-platform: EHCI generic platform driver
[    3.173595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.173613] ohci-pci: OHCI PCI platform driver
[    3.174120] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.174137] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    3.174222] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034b000
[    3.236472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.236478] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.236482] usb usb3: Product: OHCI PCI host controller
[    3.236485] usb usb3: Manufacturer: Linux 4.15.0-30-generic ohci_hcd
[    3.236488] usb usb3: SerialNumber: 0000:00:12.0
[    3.237135] hub 3-0:1.0: USB hub found
[    3.237225] hub 3-0:1.0: 5 ports detected
[    3.237981] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    3.237995] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[    3.238055] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0349000
[    3.300470] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.300476] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.300480] usb usb4: Product: OHCI PCI host controller
[    3.300483] usb usb4: Manufacturer: Linux 4.15.0-30-generic ohci_hcd
[    3.300486] usb usb4: SerialNumber: 0000:00:16.0
[    3.301236] hub 4-0:1.0: USB hub found
[    3.301317] hub 4-0:1.0: 4 ports detected
[    3.301803] ohci-platform: OHCI generic platform driver
[    3.301838] uhci_hcd: USB Universal Host Controller Interface driver
[    3.302000] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.306547] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.306558] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.307393] mousedev: PS/2 mouse device common for all mice
[    3.309054] rtc_cmos 00:01: RTC can wake from S4
[    3.309319] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.309367] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    3.309393] i2c /dev entries driver
[    3.309550] device-mapper: uevent: version 1.0.3
[    3.309830] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.309941] ledtrig-cpu: registered to indicate activity on CPUs
[    3.311182] NET: Registered protocol family 10
[    3.311461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    3.328641] Segment Routing with IPv6
[    3.328704] NET: Registered protocol family 17
[    3.328870] Key type dns_resolver registered
[    3.329697] RAS: Correctable Errors collector initialized.
[    3.329707] microcode: microcode updated early to new patch_level=0x05000119
[    3.329784] microcode: CPU0: patch_level=0x05000119
[    3.329878] microcode: CPU1: patch_level=0x05000119
[    3.329978] microcode: Microcode Update Driver: v2.2.
[    3.330002] sched_clock: Marking stable (3329964950, 0)->(3490265614, -160300664)
[    3.330762] registered taskstats version 1
[    3.330790] Loading compiled-in X.509 certificates
[    3.341236] Loaded X.509 cert 'Build time autogenerated kernel key: 83a24b0453c1c7015e385f44153c9d4e483baefd'
[    3.341315] zswap: loaded using pool lzo/zbud
[    3.356370] Key type big_key registered
[    3.356383] Key type trusted registered
[    3.363722] Key type encrypted registered
[    3.363741] AppArmor: AppArmor sha1 policy hashing enabled
[    3.363750] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.363811] evm: HMAC attrs: 0x1
[    3.364967]   Magic number: 14:603:428
[    3.365262] rtc_cmos 00:01: setting system clock to 2018-08-14 11:26:59 UTC (1534246019)
[    3.365557] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.365791] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.365792] EDD information not available.
[    3.376698] Freeing unused kernel memory: 2408K
[    3.392355] Write protecting the kernel read-only data: 20480k
[    3.394561] Freeing unused kernel memory: 2008K
[    3.408532] Freeing unused kernel memory: 1904K
[    3.432873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.698913] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.717531] acpi device:00: registered as cooling_device2
[    3.717710] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.732173] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    3.804765] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20170831/utaddress-247)
[    3.804784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.823708] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.823727] wmi_bus wmi_bus-PNP0C14:00: WQBD data block query control method not found
[    3.823732] wmi_bus wmi_bus-PNP0C14:00: WQBE data block query control method not found
[    3.823745] wmi_bus wmi_bus-PNP0C14:00: WQBG data block query control method not found
[    3.823751] wmi_bus wmi_bus-PNP0C14:00: WQBH data block query control method not found
[    3.823755] wmi_bus wmi_bus-PNP0C14:00: WQBI data block query control method not found
[    3.823760] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[    3.837728] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.837757] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.838884] r8169 0000:03:00.0 eth0: RTL8105e at 0x        (ptrval), b4:b5:2f:38:de:28, XID 00c00000 IRQ 25
[    3.854666] ahci 0000:00:11.0: version 3.0
[    3.855897] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.855905] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    3.857398] scsi host0: ahci
[    3.857747] scsi host1: ahci
[    3.857862] ata1: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c100 irq 26
[    3.857866] ata2: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c180 irq 26
[    3.938897] [drm] radeon kernel modesetting enabled.
[    3.939736] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x103C:0x1885 0x00).
[    3.939831] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[    3.939839] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[    3.940744] ATOM BIOS: HP
[    3.940827] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    3.940832] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    3.940841] [drm] Detected VRAM RAM=384M, BAR=256M
[    3.940843] [drm] RAM width 32bits DDR
[    3.941075] [TTM] Zone  kernel: Available graphics memory: 1814452 kiB
[    3.941078] [TTM] Initializing pool allocator
[    3.941088] [TTM] Initializing DMA pool allocator
[    3.941157] [drm] radeon: 384M of VRAM memory ready
[    3.941160] [drm] radeon: 1024M of GTT memory ready.
[    3.941180] [drm] Loading PALM Microcode
[    3.941330] [drm] Internal thermal controller without fan control
[    3.941447] [drm] Found smc ucode version: 0x00010601
[    3.941527] [drm] radeon: dpm initialized
[    3.941859] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.964292] usb 3-2: New USB device found, idVendor=046d, idProduct=c016
[    3.964299] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.964303] usb 3-2: Product: Optical USB Mouse
[    3.964306] usb 3-2: Manufacturer: Logitech
[    3.970542] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    3.971703] radeon 0000:00:01.0: WB enabled
[    3.971713] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x        (ptrval)
[    3.971717] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x        (ptrval)
[    3.972263] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x        (ptrval)
[    3.972292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.972293] [drm] Driver supports precise vblank timestamp query.
[    3.972296] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    3.972407] radeon 0000:00:01.0: radeon: using MSI.
[    3.972458] [drm] radeon: irq initialized.
[    3.989864] [drm] ring test on 0 succeeded in 1 usecs
[    3.989933] [drm] ring test on 3 succeeded in 3 usecs
[    4.035695] [drm] ring test on 5 succeeded in 1 usecs
[    4.055636] [drm] UVD initialized successfully.
[    4.056831] [drm] ib test on ring 0 succeeded in 0 usecs
[    4.056918] [drm] ib test on ring 3 succeeded in 0 usecs
[    4.081131] r8169 0000:03:00.0 eno1: renamed from eth0
[    4.096191] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[    4.096207] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1424bf0d8ee, max_idle_ns: 440795249698 ns
[    4.107399] hidraw: raw HID events driver (C) Jiri Kosina
[    4.117898] usbcore: registered new interface driver usbhid
[    4.117902] usbhid: USB HID core driver
[    4.125725] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C016.0001/input/input7
[    4.126022] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
[    4.252289] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    4.332261] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.332315] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.334110] ata1.00: ATA-8: HITACHI HTS723216L9SA60, FC2ZC50B, max UDMA/100
[    4.334119] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.335527] ata1.00: configured for UDMA/100
[    4.336470] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72321 C50B PQ: 0 ANSI: 5
[    4.337579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.337928] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.337963] sd 0:0:0:0: [sda] Write Protect is off
[    4.337967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.338026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.341492] ata2.00: ATAPI: hp       CDDVDW SN-208BB, HH04, max UDMA/100
[    4.355635] ata2.00: configured for UDMA/100
[    4.364893] scsi 1:0:0:0: CD-ROM            hp       CDDVDW SN-208BB  HH04 PQ: 0 ANSI: 5
[    4.370201] random: fast init done
[    4.397204]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    4.399136] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399193] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399202] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399278] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399299] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399320] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.399336] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399364] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399385] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399396] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.399455] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.444570] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.444577] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.444977] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.445839] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.457356] usb 1-3: New USB device found, idVendor=1bcf, idProduct=2c1e
[    4.457363] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.457366] usb 1-3: Product: HP Truevision HD
[    4.457369] usb 1-3: Manufacturer: DCUSB01BI3AM80
[    4.608419] [drm] ib test on ring 5 succeeded
[    4.655269] psmouse serio1: synaptics: queried max coordinates: x [..5734], y [..4974]
[    4.691907] psmouse serio1: synaptics: queried min coordinates: x [1222..], y [910..]
[    4.692228] [drm] radeon atom DIG backlight initialized
[    4.692235] [drm] Radeon Display Connectors
[    4.692240] [drm] Connector 0:
[    4.692243] [drm]   LVDS-1
[    4.692244] [drm]   HPD1
[    4.692248] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    4.692249] [drm]   Encoders:
[    4.692251] [drm]     LCD1: INTERNAL_UNIPHY
[    4.692253] [drm] Connector 1:
[    4.692254] [drm]   HDMI-A-1
[    4.692255] [drm]   HPD2
[    4.692259] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    4.692260] [drm]   Encoders:
[    4.692261] [drm]     DFP1: INTERNAL_UNIPHY
[    4.692262] [drm] Connector 2:
[    4.692264] [drm]   VGA-1
[    4.692267] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    4.692268] [drm]   Encoders:
[    4.692269] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.762838] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400/0x0, board id: 2068, fw id: 1028260
[    4.808800] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.120946] clocksource: Switched to clocksource tsc
[    5.134496] [drm] fb mappable at 0xE0366000
[    5.134500] [drm] vram apper at 0xE0000000
[    5.134502] [drm] size 4325376
[    5.134504] [drm] fb depth is 24
[    5.134505] [drm]    pitch is 5632
[    5.134995] fbcon: radeondrmfb (fb0) is primary device
[    5.715416] Console: switching to colour frame buffer device 170x48
[    5.722990] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    5.740816] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[   39.150689] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   39.705216] random: crng init done
[   41.065411] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.201895] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   41.220764] systemd[1]: Detected architecture x86-64.
[   41.243341] systemd[1]: Set hostname to <Compaq-CQ58-Notebook-PC>.
[   43.977032] systemd[1]: Reached target User and Group Name Lookups.
[   43.977864] systemd[1]: Created slice User and Session Slice.
[   43.978408] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   43.978567] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   43.978606] systemd[1]: Reached target Remote File Systems.
[   43.979185] systemd[1]: Created slice System Slice.
[   43.979444] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   44.792295] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   45.449057] lp: driver loaded but no devices found
[   45.559840] systemd-journald[274]: Received request to flush runtime journal from PID 1
[   45.567657] ppdev: user-space parallel port driver
[   57.759688] input: HP Wireless hotkeys as /devices/virtual/input/input8
[   58.168021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   58.346492] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[   58.355755] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   58.355764] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   58.355768] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   58.355771] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   58.355774] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   58.355779] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   58.355782] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   58.368536] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   58.368699] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   58.448921] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   58.477646] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   58.499539] hp_wmi: query 0xd returned error 0x5
[   58.499683] input: HP WMI hotkeys as /devices/virtual/input/input12
[   58.564499] media: Linux media interface: v0.10
[   58.625902] Linux video capture interface: v2.00
[   58.812378] uvcvideo: Found UVC 1.00 device HP Truevision HD (1bcf:2c1e)
[   58.822886] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   58.822895] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized!
[   58.822899] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[   58.822903] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   58.823095] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13
[   58.823308] usbcore: registered new interface driver uvcvideo
[   58.823311] USB Video Class driver (1.1.1)
[   58.879324] kvm: Nested Virtualization enabled
[   58.879332] kvm: Nested Paging enabled
[   58.922711] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   58.960299] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   59.002832] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   59.365583] rt2800pci 0000:04:00.0 wlo1: renamed from wlan0
[   62.443663] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   62.899005] audit: type=1400 audit(1534246079.027:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=697 comm="apparmor_parser"
[   62.899019] audit: type=1400 audit(1534246079.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=697 comm="apparmor_parser"
[   62.902612] audit: type=1400 audit(1534246079.031:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=698 comm="apparmor_parser"
[   62.902625] audit: type=1400 audit(1534246079.031:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=698 comm="apparmor_parser"
[   62.902631] audit: type=1400 audit(1534246079.031:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=698 comm="apparmor_parser"
[   62.902637] audit: type=1400 audit(1534246079.031:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=698 comm="apparmor_parser"
[   62.949432] audit: type=1400 audit(1534246079.079:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=700 comm="apparmor_parser"
[   62.949448] audit: type=1400 audit(1534246079.079:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=700 comm="apparmor_parser"
[   62.983959] audit: type=1400 audit(1534246079.111:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=703 comm="apparmor_parser"
[   62.983977] audit: type=1400 audit(1534246079.111:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=703 comm="apparmor_parser"
[  139.383619] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[  139.640505] r8169 0000:03:00.0 eno1: link down
[  139.640539] r8169 0000:03:00.0 eno1: link down
[  139.641085] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[  139.717788] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  139.717949] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[  139.731036] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[  139.884758] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  140.163878] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  141.199020] r8169 0000:03:00.0 eno1: link up
[  141.199054] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[  157.565099] rfkill: input handler disabled
[  159.003958] vboxdrv: loading out-of-tree module taints kernel.
[  159.006018] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[  159.037787] vboxdrv: Found 2 processor cores
[  159.072575] vboxdrv: TSC mode is Invariant, tentative frequency 1397457769 Hz
[  159.072580] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
[  159.101322] VBoxNetFlt: Successfully started.
[  159.129171] VBoxNetAdp: Successfully started.
[  159.180360] VBoxPciLinuxInit
[  159.200920] vboxpci: IOMMU not found (not registered)
[ 1557.195979] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 2303.621639] perf: interrupt took too long (3160 > 3158), lowering kernel.perf_event_max_sample_rate to 63250
mckl@Compaq-CQ58-Notebook-PC:~$ 

Dernière modification par Nex_plus_ultra (Le 14/08/2018, à 21:04)

Hors ligne

#2 Le 15/08/2018, à 08:17

tcheupel

Re : Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Par "mise à niveau" tu veux dire que tu l'as fait à partir de la 16.04 ? Sur le problème lui-même je ne peux pas t'aider, mais il est certain qu'une installation complète est toujours souhaitable.


- Portable Dell Inspiron 3581 : Debian 12 Gnome
SSD 1to - Ram 8go - Intel i3 - CG intégrée Intel HD 620
- Portable ASUS S406U : Debian 12 XFCE
SSD 240go - Ram 8go - Intel i5 - CG intégrée Intel HD 620

Hors ligne

#3 Le 15/08/2018, à 09:32

Abass benjamen

Re : Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Bonjour,
espérons que tu avais fais une sauvegarde avant de lancer ta mise à niveau si oui ou non si ta données importants tu fais un backup et si non tu fais une nouvelle installation se ce que j'ai comme solution en main si non tu peux toute fois continuer a consulter certains message des utilisateurs ils pourront t’éclairer.
CDT\

Hors ligne

#4 Le 15/08/2018, à 10:38

Nex_plus_ultra

Re : Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Bonjour et Merci de vos réponses,

@tcheupel  Oui par mise a niveau, j'entends l'upgrade 16.04 vers 18.04 (bien sur qu'il est préférable de faire une install fraiche, ce qui de toute facon a de grandes chances d'arriver vu la situation! voir plus bas )
@Abass benjamen   Oui j'avais sauvegardé les données importantes, pas de problemes de ce coté la.

J'ai cherché depuis hier sans parvenir a régler ce probleme, qui persiste.. Et donc finalement decider a faire une installation nouvelle, j'ai télécharger l'iso, verifier la signature, et créer ma clé bootable. Jusque la ça roule. Mais lorsque je boot sur la clé, elle m'affiche le meme message "[    0.004000] do_IRQ: 1.55 No irq handler for vector"  tout en parvenant a démarrer.. J'ai donc fais un check de cette clé, et ça ne trouve aucun problemes...

Donc en voyant ce meme message, que ce soit sur le boot de Ubuntu 18.04.1 venant de la 16.04, ou celui de la clé bootable avec l'iso que j'ai téléchargé cette nuit , je me dis qu'une nouvelle installation ne réglera pas le probleme, si?

Hors ligne

#5 Le 15/08/2018, à 14:08

erresse

Re : Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Nex_plus_ultra a écrit :

[    0.004000] do_IRQ: 1.55 No irq handler for vector
gave up waiting for supend/resume device
/dev/sda6: clean, 201150/8486912 files...

Pas sûr que ces trois lignes aillent ensemble...
La troisième est juste une info qui dit que ton volume /dev/sda6 est sain (c'est plutôt bon signe).
La deuxième semble faire référence à la suspension/relance d'un périphérique (peut-être veille/hibernation ?).
Problème d'irq pour la première, mais je ne sais pas l'analyser ni si c'est un réel problème pour ta machine...
Note: Selon mes machines, j'ai parfois des messages d'erreurs ou d'avertissement au démarrage mais ça ne semble pas influer sur le fonctionnement du système une fois qu'il est lancé. Ce peut être lié au niveau du BIOS par rapport à celui du noyau utilisé...


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#6 Le 15/08/2018, à 14:24

Nex_plus_ultra

Re : Upgrade 16.04 => 18.04 LTS : message (d'erreur?) pendant boot

Ok Merci beaucoup pour ces précisions, je vais essayer une nouvelle installation pour voir si ca me fait la meme chose..

Hors ligne