#1 Le 09/07/2018, à 23:07
- e-frida
Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Bonjour à tous !
Pour info, j'ai installé ce jour Ubuntu 18.04 sur mon HP Envy 1262F et tout m'a l'air parfait...
Installation propre depuis live CD aucun problème pour l'instant.
Pour ceux qui ont suivi mes déboires de wifi sur la 16.04, pour l'instant RAS avec la 18.04 sans aucune manipulation ou installation tiers.
Je laisse ci-après mon boot-info pour les pros (hello malbo ! )afin de mettre à jour la liste des PC compatibles.
Je laisse également ce sujet ouvert pour ceux qui ont cette configuration de machine et qui voudraient avoir des infos ou partager...
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 596.2 GiB, 640135028736 bytes, 1250263728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,250,263,727 1,250,263,727 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,250,263,039 1,249,212,416 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1 54FB-3CB6 vfat
/dev/sda2 7d4f5f32-1928-480b-9895-d336e2789327 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 9 23:53 ata-Hitachi_HTS547564A9E384_J2130053EU1L0B -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 9 23:53 ata-Hitachi_HTS547564A9E384_J2130053EU1L0B-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 9 23:53 ata-Hitachi_HTS547564A9E384_J2130053EU1L0B-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 9 22:39 ata-hp_CDDVDW_SU-208BB_R8V96GUCA00B66 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 9 23:53 wwn-0x5000cca63ee79238 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 9 23:53 wwn-0x5000cca63ee79238-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 9 23:53 wwn-0x5000cca63ee79238-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 7d4f5f32-1928-480b-9895-d336e2789327 root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7d4f5f32-1928-480b-9895-d336e2789327' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
linux /boot/vmlinuz-4.15.0-23-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-23-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7d4f5f32-1928-480b-9895-d336e2789327' {
menuentry 'Ubuntu, avec Linux 4.15.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-23-generic-advanced-7d4f5f32-1928-480b-9895-d336e2789327' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
echo 'Chargement de Linux 4.15.0-23-generic…'
linux /boot/vmlinuz-4.15.0-23-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-23-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-23-generic-recovery-7d4f5f32-1928-480b-9895-d336e2789327' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
echo 'Chargement de Linux 4.15.0-23-generic…'
linux /boot/vmlinuz-4.15.0-23-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-23-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-7d4f5f32-1928-480b-9895-d336e2789327' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-7d4f5f32-1928-480b-9895-d336e2789327' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7d4f5f32-1928-480b-9895-d336e2789327
else
search --no-floppy --fs-uuid --set=root 7d4f5f32-1928-480b-9895-d336e2789327
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=7d4f5f32-1928-480b-9895-d336e2789327 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=54FB-3CB6 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
343.527942657 = 368.860319744 boot/grub/grub.cfg 2
368.696155548 = 395.884482560 boot/vmlinuz-4.15.0-20-generic 1
105.325069427 = 113.091932160 boot/vmlinuz-4.15.0-23-generic 1
368.696155548 = 395.884482560 vmlinuz 1
370.642589569 = 397.974450176 boot/initrd.img-4.15.0-20-generic 3
384.677139282 = 413.043933184 boot/initrd.img-4.15.0-23-generic 7
370.642589569 = 397.974450176 initrd.img 3
370.642589569 = 397.974450176 initrd.img.old 3
ADDITIONAL INFORMATION :
=================== log of boot-info 20180709_2352 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=7d4f5f32-1928-480b-9895-d336e2789327 ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04 LTS CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="54FB-3CB6" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="bd6ca5fd-74e4-4b16-92cc-52119ef3954f"
/dev/sda2: UUID="7d4f5f32-1928-480b-9895-d336e2789327" TYPE="ext4" PARTUUID="6ea7a8c7-a0b1-4833-8c08-84cb5ac62b62"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 9 23:43 grub.d
total 80
-rwxr-xr-x 1 root root 9783 mars 4 14:11 00_header
-rwxr-xr-x 1 root root 6258 mars 4 14:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars 4 14:11 10_linux
-rwxr-xr-x 1 root root 11298 mars 4 14:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 4 14:11 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 4 14:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 4 14:11 40_custom
-rwxr-xr-x 1 root root 216 mars 4 14:11 41_custom
-rw-r--r-- 1 root root 483 mars 4 14:11 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=54FB-3CB6 (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,3000,3001,0003,0002,2001,2002,2003
Boot0000* ubuntu HD(1,GPT,bd6ca5fd-74e4-4b16-92cc-52119ef3954f,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0002* Network Adapter (IPv6 UEFI) PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x2)/MAC(6c3be57ed2c9,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0003* Network Adapter (IPv4 UEFI) PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x2)/MAC(6c3be57ed2c9,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot2001* USB Drive (UEFI) RC
Boot2002* Internal CD/DVD ROM Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
Boot3001* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:640GB:scsi:512:4096:gpt:ATA Hitachi HTS54756:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:640GB:640GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 86,6M
loop1 loop squashfs 12,2M
loop2 loop squashfs 1,6M
loop3 loop squashfs 140M
loop4 loop squashfs 21M
loop5 loop squashfs 3,3M
loop6 loop squashfs 86,9M
loop7 loop squashfs 3,7M
loop8 loop squashfs 2,3M
loop9 loop squashfs 14,5M
loop10 loop squashfs 13M
loop11 loop squashfs 139,5M
sda disk 596,2G
sda1 part vfat 512M
sda2 part ext4 595,7G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/core/4486
loop1 1 1 0 /snap/gnome-characters/69
loop2 1 1 0 /snap/gnome-calculator/154
loop3 1 1 0 /snap/gnome-3-26-1604/59
loop4 1 1 0 /snap/gnome-logs/25
loop5 1 1 0 /snap/gnome-system-monitor/36
loop6 1 1 0 /snap/core/4917
loop7 1 1 0 /snap/gnome-system-monitor/45
loop8 1 1 0 /snap/gnome-calculator/178
loop9 1 1 0 /snap/gnome-logs/37
loop10 1 1 0 /snap/gnome-characters/101
loop11 1 1 0 /snap/gnome-3-26-1604/64
sda 1 0 0 running
sda1 1 0 0 /boot/efi
sda2 1 0 0 /
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4001328k,nr_inodes=1000332,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=806164k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=39,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14156)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/120 type tmpfs (rw,nosuid,nodev,relatime,size=806160k,mode=700,uid=120,gid=125)
tmpfs on /run/user/1001 type tmpfs (rw,nosuid,nodev,relatime,size=806160k,mode=700,uid=1001,gid=1001)
gvfsd-fuse on /run/user/1001/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1001,group_id=1001)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_45.snap on /snap/gnome-system-monitor/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_178.snap on /snap/gnome-calculator/178 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_101.snap on /snap/gnome-characters/101 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_64.snap on /snap/gnome-3-26-1604/64 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=806160k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill sda sda1 sda2 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 b6 3c fb 54 4e 4f 20 4e 41 4d 45 20 20 |..).<.TNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 788M 3.6M 784M 1% /run
/dev/sda2 ext4 586G 12G 544G 3% /
tmpfs tmpfs 3.9G 4.3M 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/loop0 squashfs 87M 87M 0 100% /snap/core/4486
/dev/loop1 squashfs 13M 13M 0 100% /snap/gnome-characters/69
/dev/loop4 squashfs 21M 21M 0 100% /snap/gnome-logs/25
/dev/loop2 squashfs 1.7M 1.7M 0 100% /snap/gnome-calculator/154
/dev/loop5 squashfs 3.4M 3.4M 0 100% /snap/gnome-system-monitor/36
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/59
/dev/sda1 vfat 511M 4.7M 507M 1% /boot/efi
tmpfs tmpfs 788M 16K 788M 1% /run/user/120
tmpfs tmpfs 788M 56K 788M 1% /run/user/1001
/dev/loop6 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/45
/dev/loop8 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/178
/dev/loop9 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop10 squashfs 13M 13M 0 100% /snap/gnome-characters/101
/dev/loop11 squashfs 140M 140M 0 100% /snap/gnome-3-26-1604/64
tmpfs tmpfs 788M 36K 788M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/loop0: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3813376 bytes, 7448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 596.2 GiB, 640135028736 bytes, 1250263728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: D7553A2D-2F66-4E46-9127-3EA0395081A2
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1250263039 1249212416 595.7G Linux filesystem
Disk /dev/loop8: 2.3 MiB, 2428928 bytes, 4744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 139.5 MiB, 146276352 bytes, 285696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
Bien à vous !
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#2 Le 10/07/2018, à 05:09
- xubu1957
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Bonjour,
Pour ceux qui ont suivi mes déboires de wifi sur la 16.04, pour l'instant RAS avec la 18.04 sans aucune manipulation ou installation tiers.
Tu peux montrer :
iwconfig
?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#3 Le 10/07/2018, à 07:04
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Bonjour,
lo no wireless extensions.
wlo1 IEEE 802.11 ESSID:"Livebox-XXXX"
Mode:Managed Frequency:2.462 GHz Access Point: 78:xx:xx:xx:xx:xx
Bit Rate=52 Mb/s Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=48/70 Signal level=-62 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1090 Invalid misc:669 Missed beacon:0
eno1 no wireless extensions.
Pour le peux que je comprends le signal et vraiment pas terrible... J'ai un dongle USB wifi pour le cas où et je pense que je vais l'utiliser mais quoi qu'il en soit pour l'instant je n'ai aucun problème de décrochage ou de perte de connexion.
Pour info comme pour 16.04 le bluetooth ne fonctionne pas... Pas un souscis pour moi...
Cordialement.
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#4 Le 10/07/2018, à 07:10
- xubu1957
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Essaye :
sudo iwconfig wlo1 power off
pour désactiver la gestion de l'énergie de la carte.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 10/07/2018, à 07:35
- papy104
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Bonjour
Installation en dual boot ?
Papy
Jeune depuis très longtemps!
Ubuntu 22.04 MATE et pas vaillant en lignes de commande
Hors ligne
#6 Le 10/07/2018, à 07:38
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Essaye :
sudo iwconfig wlo1 power off
pour désactiver la gestion de l'énergie de la carte.
Rien ne se passe.. Enfin je n'ai pas de retour de commande...
@papy104 : non pas de dual boot. Mais sur 16.04 je n'ai pas eu de soucis particulier en dual boot...
Bien à vous.
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#7 Le 10/07/2018, à 07:45
- xubu1957
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Invalid misc:669
Recherche documentaire du 25/05/2017 > wifi-too-much-invalid-misc-how-to-fix-it
Wifi "Invalid misc", comment le réparer?
Voici quelques résultats:root@debian:/home/love# iwconfig wlan0 wlan0 IEEE 802.11bgn ESSID:"SITI_Broadband-06E6-G" ... Tx excessive retries:0 Invalid misc:202 Missed beacon:0
J'ai remarqué que la valeur augmente avec le temps et que mon wifi reste connecté, mais Internet arrête de fonctionner.
Cela ressemble à un problème typique d'interférence wifi. Essayez de localiser l'appareil causant le problème et, lorsque vous le faites, supprimez cette question car elle serait hors sujet. Il suffit simplement de désactiver la plupart des équipements électroniques et de faire attention à ce qui change lorsque les problèmes commencent, peut généralement résoudre 90% de ceux-ci.
Ta box est sur une multiprise, d'autres appareils sont à proximité ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#8 Le 10/07/2018, à 07:59
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Invalid misc:669
Recherche documentaire du 25/05/2017 > wifi-too-much-invalid-misc-how-to-fix-it
Wifi "Invalid misc", comment le réparer?
Voici quelques résultats:root@debian:/home/love# iwconfig wlan0 wlan0 IEEE 802.11bgn ESSID:"SITI_Broadband-06E6-G" ... Tx excessive retries:0 Invalid misc:202 Missed beacon:0
J'ai remarqué que la valeur augmente avec le temps et que mon wifi reste connecté, mais Internet arrête de fonctionner.
Cela ressemble à un problème typique d'interférence wifi. Essayez de localiser l'appareil causant le problème et, lorsque vous le faites, supprimez cette question car elle serait hors sujet. Il suffit simplement de désactiver la plupart des équipements électroniques et de faire attention à ce qui change lorsque les problèmes commencent, peut généralement résoudre 90% de ceux-ci.Ta box est sur une multiprise, d'autres appareils sont à proximité ?
Oui elle est sur multiprise et oui il y a des appareils... La box TV, un empli pour les enceintes et ma xbox... D'ailleurs je viens de remarquer que le transfo de la xbox et posé entre les 2 box
Sous windows 10 aussi j'avais des problèmes de décrochage du wifi mais avec le dongle USB rien et j'ai franchement gagné en stabilité et débit... D'ailleurs à ce propos, sous windows ont peut switcher de la carte interne wifi au dongle USB. Peut-on faire de même sous Ubuntu ? Ou faut-il comme je l'ai lu ici et là désactiver la carte réseau dans le bios ?
Bien à vous !
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#9 Le 10/07/2018, à 08:04
- xubu1957
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Tx excessive retries:1090
Recherche documentaire du 09/03/2018 - Dans > linux.die.net/man/8/iwconfig
Tx excessive retries
Number of packets that the hardware failed to deliver. Most MAC protocols will retry the packet a number of times before giving up.
Nombre de paquets que le matériel n' a pas pu livrer. La plupart des protocoles MAC vont réessayer le paquet plusieurs fois avant d'abandonner.
Invalid misc
Other packets lost in relation with specific wireless operations.
Autres paquets perdus en relation avec des opérations sans fil spécifiques.
Tu devrais essayer de déplacer la Box.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 10/07/2018, à 08:09
- Nuliel
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Bonjour,
N'importe qui peut éditer la doc, notamment pour rajouter une ligne à un tableau, même pas besoin de s'inscrire! Il suffit simplement d'aller à l'endroit où devrait être le pc, copier la ligne du dessous, la coller et l'éditer pour que ça corresponde au pc. (ça a été fait)
Dernière modification par Nuliel (Le 10/07/2018, à 08:14)
Hors ligne
#11 Le 10/07/2018, à 09:07
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Et pour désactiver le wifi interne ? J'ai désactivé l'amorçage carte réseau dans le bios mais ça ne marche pas... Je souhaiterai utiliser mon dongle USB qui est vraiment plus performant que ma carte wifi mais je ne trouve rien pour l'installer en lieu et place de ma carte wifi...
Si quelqu'un peut m'aider...
Bien à vous !
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#12 Le 10/07/2018, à 09:20
- xubu1957
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Essaye :
sudo ifconfig wlo1 down
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#13 Le 10/07/2018, à 09:30
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Essaye :
sudo ifconfig wlo1 down
Commande introuvable...
Bien à vous !
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne
#14 Le 10/07/2018, à 10:06
- e-frida
Re : Installation Ubuntu 18.04 sur HP Envy 1262F OK !
Pour le wifi j'ai ouvert un nouveau post ici.
Bien à vous !
"Je parle peut-être d'une chose qui n'existe pas. Je suis donc libre de tout dire ou de ne rien dire."
P. K Dick
Hors ligne