Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 22/06/2018, à 22:13

Crestey

Re : [Résolu] Interprétation d'un test disque dur

Ah bon ?!? Le fait de cloner plutôt que de ré-installer tu crois ?


Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#27 Le 22/06/2018, à 23:30

??

Re : [Résolu] Interprétation d'un test disque dur

Le clonage n'est pas en cause
Donnes le retour de 

 dmesg  | head -1500 

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#28 Le 23/06/2018, à 10:09

Crestey

Re : [Résolu] Interprétation d'un test disque dur

@ ?? :
Voilà pour le disque magnétique classique

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-122-generic (buildd@lcy01-amd64-005) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #146-Ubuntu SMP Mon Apr 23 15:34:04 UTC 2018 (Ubuntu 4.4.0-122.146-generic 4.4.117)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz root=UUID=b13b59a0-484a-43b5-93cd-f97dc99e286c ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 004ff80000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004ff4ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000004ff50000-0x000000004ff64fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000004ff65000-0x000000004ff65fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000004ff66000-0x000000005fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Acer             Aspire 7220     /Fuquene, BIOS V1.04 07/04/2007
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x4ff50 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f7cd0-0x000f7cdf] mapped at [ffff8800000f7cd0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[    0.000000] BRK [0x02216000, 0x02216fff] PGTABLE
[    0.000000] BRK [0x02217000, 0x02217fff] PGTABLE
[    0.000000] BRK [0x02218000, 0x02218fff] PGTABLE
[    0.000000] BRK [0x02219000, 0x02219fff] PGTABLE
[    0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3363e000-0x35b16fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7CE0 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000004FF5E4F4 00005C (v01 ACRSYS ACRPRDCT 06040000  LTP 00000000)
[    0.000000] ACPI: SLIC 0x000000004FF64BAC 000176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
[    0.000000] ACPI: FACP 0x000000004FF64D22 0000F4 (v03 NVIDIA MCP67-M  06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 0x000000004FF5E550 0065E8 (v01 NVIDIA MCP67    06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000004FF65FC0 000040
[    0.000000] ACPI: FACS 0x000000004FF65FC0 000040
[    0.000000] ACPI: SSDT 0x000000004FF64E16 0000F4 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: MCFG 0x000000004FF64F0A 00003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000)
[    0.000000] ACPI: HPET 0x000000004FF64F46 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x000000004FF64F7E 00005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000004FF64FD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000004ff4ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x4ff4b000-0x4ff4ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000004ff4ffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000004ff4ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004ff4ffff]
[    0.000000] On node 0 totalpages: 327405
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5054 pages used for memmap
[    0.000000]   DMA32 zone: 323408 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88004fc00000 s99544 r8192 d31528 u2097152
[    0.000000] pcpu-alloc: s99544 r8192 d31528 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 322265
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=b13b59a0-484a-43b5-93cd-f97dc99e286c ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x4dd0000000-0x4dd1ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1232368K/1309620K available (8532K kernel code, 1313K rwdata, 3996K rodata, 1508K init, 1316K bss, 77252K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1800.281 MHz processor
[    0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.56 BogoMIPS (lpj=7201124)
[    0.004020] pid_max: default: 32768 minimum: 301
[    0.004029] ACPI: Core revision 20150930
[    0.013728] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.013766] Security Framework initialized
[    0.013770] Yama: becoming mindful.
[    0.013797] AppArmor: AppArmor initialized
[    0.014061] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015816] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.016742] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016750] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.017212] Initializing cgroup subsys io
[    0.017221] Initializing cgroup subsys memory
[    0.017240] Initializing cgroup subsys devices
[    0.017246] Initializing cgroup subsys freezer
[    0.017252] Initializing cgroup subsys net_cls
[    0.017258] Initializing cgroup subsys perf_event
[    0.017264] Initializing cgroup subsys net_prio
[    0.017272] Initializing cgroup subsys hugetlb
[    0.017277] Initializing cgroup subsys pids
[    0.017311] FEATURE SPEC_CTRL Not Present
[    0.017314] FEATURE IBPB Not Present
[    0.017318] mce: CPU supports 5 MCE banks
[    0.017331] LVT offset 0 assigned for vector 0xf9
[    0.017336] process: using AMD E400 aware idle routine
[    0.017340] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.017342] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.017346] Spectre V2 mitigation: LFENCE not serializing. Switching to generic retpoline
[    0.017404] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.017407] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.017409] Spectre V2 mitigation: Filling RSB on context switch
[    0.027814] Freeing SMP alternatives memory: 32K
[    0.032011] ftrace: allocating 32202 entries in 126 pages
[    0.064282] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.064287] smpboot: Max logical packages: 1
[    0.064823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.108000] smpboot: CPU0: Mobile AMD Sempron(tm) Processor 3500+ (family: 0xf, model: 0x4c, stepping: 0x2)
[    0.108000] Performance Events: AMD PMU driver.
[    0.108000] ... version:                0
[    0.108000] ... bit width:              48
[    0.108000] ... generic registers:      4
[    0.108000] ... value mask:             0000ffffffffffff
[    0.108000] ... max period:             00007fffffffffff
[    0.108000] ... fixed-purpose events:   0
[    0.108000] ... event mask:             000000000000000f
[    0.108000] x86: Booted up 1 node, 1 CPUs
[    0.108000] smpboot: Total of 1 processors activated (3600.56 BogoMIPS)
[    0.108000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.108000] devtmpfs: initialized
[    0.111363] evm: security.selinux
[    0.111366] evm: security.SMACK64
[    0.111367] evm: security.SMACK64EXEC
[    0.111369] evm: security.SMACK64TRANSMUTE
[    0.111371] evm: security.SMACK64MMAP
[    0.111372] evm: security.ima
[    0.111374] evm: security.capability
[    0.111466] PM: Registering ACPI NVS region [mem 0x4ff65000-0x4ff65fff] (4096 bytes)
[    0.111575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.111587] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.111707] pinctrl core: initialized pinctrl subsystem
[    0.111889] RTC time:  8:52:51, date: 06/23/18
[    0.112150] NET: Registered protocol family 16
[    0.112442] cpuidle: using governor ladder
[    0.112446] cpuidle: using governor menu
[    0.112450] PCCT header not found.
[    0.112459] node 0 link 0: io port [1000, fffff]
[    0.112462] TOM: 0000000060000000 aka 1536M
[    0.112466] node 0 link 0: mmio [a0000, bffff]
[    0.112470] node 0 link 0: mmio [60000000, dfffffff]
[    0.112473] node 0 link 0: mmio [e0000000, efffffff]
[    0.112475] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.112479] bus: [bus 00-ff] on node 0 link 0
[    0.112481] bus: 00 [io  0x0000-0xffff]
[    0.112483] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.112486] bus: 00 [mem 0x60000000-0xfcffffffff]
[    0.112536] Simple Boot Flag at 0x36 set to 0x1
[    0.112576] ACPI: bus type PCI registered
[    0.112579] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112690] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.112694] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.112718] PCI: Using configuration type 1 for base access
[    0.115091] ACPI: Added _OSI(Module Device)
[    0.115095] ACPI: Added _OSI(Processor Device)
[    0.115098] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.115100] ACPI: Added _OSI(Processor Aggregator Device)
[    0.119816] ACPI : EC: EC started
[    0.119959] ACPI: Interpreter enabled
[    0.119982] ACPI: (supports S0 S3 S4 S5)
[    0.119985] ACPI: Using IOAPIC for interrupt routing
[    0.120042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.203567] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.203576] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.203654] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff])
[    0.203961] PCI host bridge to bus 0000:00
[    0.203966] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.203969] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.203973] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.203976] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.203980] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.203983] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.203986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.203990] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.203997] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.204008] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.204011] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.204015] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.204018] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.204021] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.204025] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.204028] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.204032] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfebfffff window]
[    0.204035] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.204057] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000
[    0.204332] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100
[    0.204343] pci 0000:00:01.0: reg 0x10: [io  0x1d00-0x1dff]
[    0.204492] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500
[    0.204509] pci 0000:00:01.1: reg 0x10: [io  0x3080-0x30bf]
[    0.204527] pci 0000:00:01.1: reg 0x20: [io  0x3040-0x307f]
[    0.204534] pci 0000:00:01.1: reg 0x24: [io  0x3000-0x303f]
[    0.204560] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.204690] pci 0000:00:01.2: [10de:0541] type 00 class 0x050000
[    0.204835] pci 0000:00:01.3: [10de:0543] type 00 class 0x0b4000
[    0.204858] pci 0000:00:01.3: reg 0x10: [mem 0xf2400000-0xf247ffff]
[    0.205069] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310
[    0.205083] pci 0000:00:02.0: reg 0x10: [mem 0xf2686000-0xf2686fff]
[    0.205121] pci 0000:00:02.0: supports D1 D2
[    0.205124] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205194] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.205258] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320
[    0.205275] pci 0000:00:02.1: reg 0x10: [mem 0xf2689000-0xf26890ff]
[    0.205316] pci 0000:00:02.1: supports D1 D2
[    0.205319] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205389] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.205458] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310
[    0.205472] pci 0000:00:04.0: reg 0x10: [mem 0xf2687000-0xf2687fff]
[    0.205510] pci 0000:00:04.0: supports D1 D2
[    0.205513] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205638] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320
[    0.205655] pci 0000:00:04.1: reg 0x10: [mem 0xf2689400-0xf26894ff]
[    0.205696] pci 0000:00:04.1: supports D1 D2
[    0.205700] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.205782] pci 0000:00:04.1: System wakeup disabled by ACPI
[    0.205851] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a
[    0.205879] pci 0000:00:06.0: reg 0x20: [io  0x30c0-0x30cf]
[    0.205891] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.205894] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.205898] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.205901] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.206029] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300
[    0.206047] pci 0000:00:07.0: reg 0x10: [mem 0xf2680000-0xf2683fff]
[    0.206089] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.206163] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.206232] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401
[    0.206331] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.206395] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185
[    0.206410] pci 0000:00:09.0: reg 0x10: [io  0x30f0-0x30f7]
[    0.206416] pci 0000:00:09.0: reg 0x14: [io  0x30e4-0x30e7]
[    0.206422] pci 0000:00:09.0: reg 0x18: [io  0x30e8-0x30ef]
[    0.206428] pci 0000:00:09.0: reg 0x1c: [io  0x30e0-0x30e3]
[    0.206435] pci 0000:00:09.0: reg 0x20: [io  0x30d0-0x30df]
[    0.206441] pci 0000:00:09.0: reg 0x24: [mem 0xf2684000-0xf2685fff]
[    0.206583] pci 0000:00:0a.0: [10de:054c] type 00 class 0x020000
[    0.206600] pci 0000:00:0a.0: reg 0x10: [mem 0xf2688000-0xf2688fff]
[    0.206607] pci 0000:00:0a.0: reg 0x14: [io  0x30f8-0x30ff]
[    0.206613] pci 0000:00:0a.0: reg 0x18: [mem 0xf2689c00-0xf2689cff]
[    0.206619] pci 0000:00:0a.0: reg 0x1c: [mem 0xf2689800-0xf268980f]
[    0.206648] pci 0000:00:0a.0: supports D1 D2
[    0.206652] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206722] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.206788] pci 0000:00:0c.0: [10de:0563] type 01 class 0x060400
[    0.206825] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.206895] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.206957] pci 0000:00:0d.0: [10de:0563] type 01 class 0x060400
[    0.206993] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207062] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.207130] pci 0000:00:12.0: [10de:0533] type 00 class 0x030000
[    0.207143] pci 0000:00:12.0: reg 0x10: [mem 0xf1000000-0xf1ffffff]
[    0.207151] pci 0000:00:12.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.207158] pci 0000:00:12.0: reg 0x1c: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.207167] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.207298] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.207423] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.207550] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.207677] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.207864] pci 0000:01:04.0: [1180:0832] type 00 class 0x0c0010
[    0.207879] pci 0000:01:04.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.207882] pci 0000:01:04.0: MMC cards are now supported by standard SDHCI controller
[    0.207894] pci 0000:01:04.0: reg 0x10: [mem 0xf2300000-0xf23007ff]
[    0.207949] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[    0.208034] pci 0000:01:04.1: [1180:0822] type 00 class 0x080500
[    0.208053] pci 0000:01:04.1: reg 0x10: [mem 0xf2300800-0xf23008ff]
[    0.208108] pci 0000:01:04.1: supports D1 D2
[    0.208111] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208180] pci 0000:01:04.2: [1180:0592] type 00 class 0x088000
[    0.208199] pci 0000:01:04.2: reg 0x10: [mem 0xf2301000-0xf23010ff]
[    0.208253] pci 0000:01:04.2: supports D1 D2
[    0.208256] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208325] pci 0000:01:04.3: [1180:0852] type 00 class 0x088000
[    0.208344] pci 0000:01:04.3: reg 0x10: [mem 0xf2301400-0xf23014ff]
[    0.208397] pci 0000:01:04.3: supports D1 D2
[    0.208401] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208491] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[    0.208497] pci 0000:00:08.0:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.208502] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.208506] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.208509] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.208513] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.208516] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.208520] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.208523] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.208527] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.208530] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.208534] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.208537] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.208540] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.208544] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.208547] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.208551] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.208554] pci 0000:00:08.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.208558] pci 0000:00:08.0:   bridge window [mem 0x60000000-0xfebfffff window] (subtractive decode)
[    0.208633] acpiphp: Slot [1] registered
[    0.208640] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[    0.208645] pci 0000:00:0c.0:   bridge window [io  0x4000-0x4fff]
[    0.208649] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.208654] pci 0000:00:0c.0:   bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.208720] pci 0000:05:00.0: [168c:001c] type 00 class 0x020000
[    0.208753] pci 0000:05:00.0: reg 0x10: [mem 0xf2200000-0xf220ffff 64bit]
[    0.208897] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.208907] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.208912] pci 0000:00:0d.0:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.248418] ACPI: PCI Interrupt Link [LNK1] (IRQs 16) *10
[    0.248538] ACPI: PCI Interrupt Link [LNK2] (IRQs 16) *11
[    0.248655] ACPI: PCI Interrupt Link [LNK3] (IRQs 17 18 19) *0, disabled.
[    0.248772] ACPI: PCI Interrupt Link [LNK4] (IRQs 17 18 19) *0, disabled.
[    0.248890] ACPI: PCI Interrupt Link [LK1E] (IRQs 17 18 19) *0, disabled.
[    0.249007] ACPI: PCI Interrupt Link [LK2E] (IRQs 17 18 19) *0, disabled.
[    0.249125] ACPI: PCI Interrupt Link [LK3E] (IRQs 17 18 19) *0, disabled.
[    0.249242] ACPI: PCI Interrupt Link [LK4E] (IRQs 17 18 19) *10
[    0.249359] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *10
[    0.249475] ACPI: PCI Interrupt Link [LUS0] (IRQs 21 22 23) *11
[    0.249592] ACPI: PCI Interrupt Link [LUS2] (IRQs 21 22 23) *7
[    0.249708] ACPI: PCI Interrupt Link [LMAC] (IRQs 21 22 23) *11
[    0.249825] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[    0.249941] ACPI: PCI Interrupt Link [LGPU] (IRQs 20) *10
[    0.250058] ACPI: PCI Interrupt Link [LPID] (IRQs 21 22 23) *0, disabled.
[    0.250175] ACPI: PCI Interrupt Link [LSI0] (IRQs 21 22 23) *5
[    0.250297] ACPI: PCI Interrupt Link [Z00N] (IRQs 21 22 23) *10
[    0.250418] ACPI: PCI Interrupt Link [Z00O] (IRQs 21 22 23) *11
[    0.250535] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *11
[    0.250676] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.250763] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.250971] vgaarb: setting as boot device: PCI:0000:00:12.0
[    0.250974] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
[    0.250979] vgaarb: loaded
[    0.250981] vgaarb: bridge control possible 0000:00:12.0
[    0.251421] SCSI subsystem initialized
[    0.251505] libata version 3.00 loaded.
[    0.251545] ACPI: bus type USB registered
[    0.251576] usbcore: registered new interface driver usbfs
[    0.251591] usbcore: registered new interface driver hub
[    0.251609] usbcore: registered new device driver usb
[    0.251826] PCI: Using ACPI for IRQ routing
[    0.258411] PCI: pci_cache_line_size set to 64 bytes
[    0.258485] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.258488] e820: reserve RAM buffer [mem 0x4ff50000-0x4fffffff]
[    0.258690] NetLabel: Initializing
[    0.258693] NetLabel:  domain hash size = 128
[    0.258694] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.258719] NetLabel:  unlabeled traffic allowed by default
[    0.258850] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.258857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.258862] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.260086] clocksource: Switched to clocksource hpet
[    0.273474] AppArmor: AppArmor Filesystem Enabled
[    0.273604] pnp: PnP ACPI init
[    0.273944] system 00:00: [io  0x0360-0x0361] has been reserved
[    0.273949] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.273956] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.308096] pnp 00:02: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.308167] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.308172] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.308234] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.308338] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.308621] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.308625] system 00:06: [io  0x1080-0x10ff] has been reserved
[    0.308629] system 00:06: [io  0x1400-0x147f] has been reserved
[    0.308632] system 00:06: [io  0x1480-0x14ff] has been reserved
[    0.308636] system 00:06: [io  0x1800-0x187f] has been reserved
[    0.308639] system 00:06: [io  0x1880-0x18ff] has been reserved
[    0.308644] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.309116] system 00:07: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.309120] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.309124] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.309128] system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.309132] system 00:07: [mem 0xfef00000-0xfef00fff] has been reserved
[    0.309136] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.309142] pnp: PnP ACPI: found 8 devices
[    0.316254] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.316315] pci 0000:00:12.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[    0.316323] pci 0000:00:08.0: PCI bridge to [bus 01]
[    0.316329] pci 0000:00:08.0:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.316336] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[    0.316340] pci 0000:00:0c.0:   bridge window [io  0x4000-0x4fff]
[    0.316344] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.316349] pci 0000:00:0c.0:   bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.316354] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.316358] pci 0000:00:0d.0:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.316367] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.316370] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.316374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.316377] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.316381] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.316384] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.316388] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.316391] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.316394] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.316398] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.316401] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.316404] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.316408] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.316411] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.316415] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.316418] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.316421] pci_bus 0000:00: resource 20 [mem 0x60000000-0xfebfffff window]
[    0.316425] pci_bus 0000:01: resource 1 [mem 0xf2300000-0xf23fffff]
[    0.316429] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.316432] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.316435] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.316439] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.316442] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.316446] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.316449] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.316452] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.316456] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.316459] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.316463] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.316466] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.316469] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.316473] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff window]
[    0.316476] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.316480] pci_bus 0000:01: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.316483] pci_bus 0000:01: resource 20 [mem 0x60000000-0xfebfffff window]
[    0.316487] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.316490] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf21fffff]
[    0.316493] pci_bus 0000:03: resource 2 [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.316497] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[    0.316568] NET: Registered protocol family 2
[    0.316884] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.317008] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.317168] TCP: Hash tables configured (established 16384 bind 16384)
[    0.317273] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.317305] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.317440] NET: Registered protocol family 1
[    0.317789] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[    0.372284] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[    0.372535] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
[    0.428251] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 23
[    0.428354] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428405] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428458] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428516] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428576] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428640] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428648] pci 0000:00:12.0: Video device with shadowed ROM
[    0.428673] PCI: CLS 64 bytes, default 64
[    0.428771] Unpacking initramfs...
[    1.464982] Freeing initrd memory: 37732K
[    1.465487] Scanning for low memory corruption every 60 seconds
[    1.465935] audit: initializing netlink subsys (disabled)
[    1.465967] audit: type=2000 audit(1529743971.464:1): initialized
[    1.466449] Initialise system trusted keyring
[    1.466604] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.469610] zbud: loaded
[    1.470140] VFS: Disk quotas dquot_6.6.0
[    1.470203] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.470716] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.471178] fuse init (API version 7.23)
[    1.471427] Key type big_key registered
[    1.471461] Allocating IMA MOK and blacklist keyrings.
[    1.471911] Key type asymmetric registered
[    1.471916] Asymmetric key parser 'x509' registered
[    1.471985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.472065] io scheduler noop registered
[    1.472071] io scheduler deadline registered (default)
[    1.472129] io scheduler cfq registered
[    1.472515] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.472525] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.482333] ACPI: AC Adapter [ACAD] (off-line)
[    1.482434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.499248] ACPI: Lid Switch [LID]
[    1.499315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.499320] ACPI: Sleep Button [SLPB]
[    1.499398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.499402] ACPI: Power Button [PWRB]
[    1.499464] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.499467] ACPI: Power Button [PWRF]
[    1.499522] tsc: Marking TSC unstable due to TSC halts in idle
[    1.499535] ACPI: acpi_idle registered with cpuidle
[    1.594777] ACPI: Invalid active0 threshold
[    1.628191] thermal LNXTHERM:00: registered as thermal_zone0
[    1.628194] ACPI: Thermal Zone [THRM] (35 C)
[    1.628312] GHES: HEST is not enabled!
[    1.628506] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.630910] Linux agpgart interface v0.103
[    1.633535] loop: module loaded
[    1.634073] libphy: Fixed MDIO Bus: probed
[    1.634078] tun: Universal TUN/TAP device driver, 1.6
[    1.634080] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.634160] PPP generic driver version 2.4.2
[    1.634258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.634266] ehci-pci: EHCI PCI platform driver
[    1.634385] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.634395] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.634408] ehci-pci 0000:00:02.1: debug port 1
[    1.634443] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.634471] ehci-pci 0000:00:02.1: irq 22, io mem 0xf2689000
[    1.644038] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.644112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.644116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.644119] usb usb1: Product: EHCI Host Controller
[    1.644123] usb usb1: Manufacturer: Linux 4.4.0-122-generic ehci_hcd
[    1.644126] usb usb1: SerialNumber: 0000:00:02.1
[    1.644306] hub 1-0:1.0: USB hub found
[    1.644317] hub 1-0:1.0: 5 ports detected
[    1.644592] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.644600] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[    1.644610] ehci-pci 0000:00:04.1: debug port 1
[    1.644641] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.644664] ehci-pci 0000:00:04.1: irq 23, io mem 0xf2689400
[    1.656036] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.656101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.656105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.656108] usb usb2: Product: EHCI Host Controller
[    1.656111] usb usb2: Manufacturer: Linux 4.4.0-122-generic ehci_hcd
[    1.656114] usb usb2: SerialNumber: 0000:00:04.1
[    1.656270] hub 2-0:1.0: USB hub found
[    1.656279] hub 2-0:1.0: 5 ports detected
[    1.656495] ehci-platform: EHCI generic platform driver
[    1.656524] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.656532] ohci-pci: OHCI PCI platform driver
[    1.656601] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.656609] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[    1.656633] ohci-pci 0000:00:02.0: irq 23, io mem 0xf2686000
[    1.714069] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.714073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.714076] usb usb3: Product: OHCI PCI host controller
[    1.714079] usb usb3: Manufacturer: Linux 4.4.0-122-generic ohci_hcd
[    1.714083] usb usb3: SerialNumber: 0000:00:02.0
[    1.714244] hub 3-0:1.0: USB hub found
[    1.714255] hub 3-0:1.0: 5 ports detected
[    1.714533] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.714541] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[    1.714580] ohci-pci 0000:00:04.0: irq 21, io mem 0xf2687000
[    1.770092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.770097] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.770100] usb usb4: Product: OHCI PCI host controller
[    1.770103] usb usb4: Manufacturer: Linux 4.4.0-122-generic ohci_hcd
[    1.770106] usb usb4: SerialNumber: 0000:00:04.0
[    1.770284] hub 4-0:1.0: USB hub found
[    1.770295] hub 4-0:1.0: 5 ports detected
[    1.770515] ohci-platform: OHCI generic platform driver
[    1.770541] uhci_hcd: USB Universal Host Controller Interface driver
[    1.770662] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.806626] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.806671] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.806885] mousedev: PS/2 mouse device common for all mice
[    1.808852] rtc_cmos 00:01: RTC can wake from S4
[    1.809038] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.809083] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.809095] i2c /dev entries driver
[    1.809195] device-mapper: uevent: version 1.0.3
[    1.809302] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.809326] ledtrig-cpu: registered to indicate activity on CPUs
[    1.809859] NET: Registered protocol family 10
[    1.810145] NET: Registered protocol family 17
[    1.810163] Key type dns_resolver registered
[    1.810601] registered taskstats version 1
[    1.810628] Loading compiled-in X.509 certificates
[    1.812361] Loaded X.509 cert 'Build time autogenerated kernel key: eb3f78ccfd14bc84ef58e051a28e8b7731c2f6e2'
[    1.812389] zswap: loaded using pool lzo/zbud
[    1.815860] Key type trusted registered
[    1.822363] Key type encrypted registered
[    1.822378] AppArmor: AppArmor sha1 policy hashing enabled
[    1.822385] ima: No TPM chip found, activating TPM-bypass!
[    1.822428] evm: HMAC attrs: 0x1
[    1.822821]   Magic number: 6:913:877
[    1.822969] rtc_cmos 00:01: setting system clock to 2018-06-23 08:52:52 UTC (1529743972)
[    1.823158] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[    1.823161] powernow_k8: fid 0x8 (1600 MHz), vid 0x12
[    1.823163] powernow_k8: fid 0x0 (800 MHz), vid 0x18
[    1.823192] powernow_k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ (1 cpu cores) (version 2.20.00)
[    1.823204] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.823206] EDD information not available.
[    1.823300] PM: Hibernation image not present or could not be loaded.
[    1.838668] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.956038] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.996806] ACPI: Battery Slot [BAT1] (battery present)
[    1.999953] Freeing unused kernel memory: 1508K
[    1.999959] Write protecting the kernel read-only data: 14336k
[    2.001663] Freeing unused kernel memory: 1696K
[    2.002140] Freeing unused kernel memory: 100K
[    2.023565] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.023611] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.025200] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.025346] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.025375] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.042326] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.042370] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.042385] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.043855] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.043891] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.186519] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[    2.186575] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.186745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.215469] wmi: Mapper loaded
[    2.223217] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.244731] pata_amd 0000:00:06.0: version 0.4.1
[    2.255511] sdhci: Secure Digital Host Controller Interface driver
[    2.255516] sdhci: Copyright(c) Pierre Ossman
[    2.260073] scsi host0: pata_amd
[    2.267508] scsi host1: pata_amd
[    2.267599] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    2.267602] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    2.270437] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
[    2.270704] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 16
[    2.271751] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.271763] sdhci-pci 0000:01:04.1: No vmmc regulator found
[    2.271766] sdhci-pci 0000:01:04.1: No vqmmc regulator found
[    2.272764] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.284802] ahci 0000:00:09.0: version 3.0
[    2.285077] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[    2.285112] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[    2.285116] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[    2.285181] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.285187] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part 
[    2.293657] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.304099] scsi host2: ahci
[    2.305407] mmc0: SDHCI controller on PCI [0000:01:04.1] using DMA
[    2.305859] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16
[    2.312341] scsi host3: ahci
[    2.319020] scsi host4: ahci
[    2.323021] [drm] Initialized drm 1.1.0 20060810
[    2.326805] scsi host5: ahci
[    2.326929] ata3: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684100 irq 22
[    2.326933] ata4: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684180 irq 22
[    2.326936] ata5: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684200 irq 22
[    2.326939] ata6: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684280 irq 22
[    2.327098] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    2.330278] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    2.360107] firewire_ohci 0000:01:04.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.382061] usb 1-3: New USB device found, idVendor=5986, idProduct=0102
[    2.382067] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.382071] usb 1-3: Product: Acer Crystal Eye webcam
[    2.445401] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[    2.445416] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
[    2.460307] ata1.00: configured for UDMA/33
[    2.465425] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f332f6c90, max_idle_ns: 440795231811 ns
[    2.470747] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
[    2.488393] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.488400] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.488646] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.488885] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.488996] ata2: port disabled--ignoring
[    2.644043] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.652037] ata6: SATA link down (SStatus 0 SControl 300)
[    2.652055] ata5: SATA link down (SStatus 0 SControl 300)
[    2.652070] ata4: SATA link down (SStatus 0 SControl 300)
[    2.687665] ata3.00: ATA-8: WDC WD800BEVT-22ZCT0, 11.01A11, max UDMA/133
[    2.687669] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.688657] ata3.00: configured for UDMA/133
[    2.688837] scsi 2:0:0:0: Direct-Access     ATA      WDC WD800BEVT-22 1A11 PQ: 0 ANSI: 5
[    2.689593] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.689660] sd 2:0:0:0: [sda] Write Protect is off
[    2.689665] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.689695] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.690010] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.748282]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
[    2.750005] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.849671] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:22:ed:0d
[    2.849678] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.850893] forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
[    2.853356] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
[    2.856307] nouveau 0000:00:12.0: NVIDIA C67 (067000a1)
[    2.867063] firewire_core 0000:01:04.0: created device fw0: GUID 00023f77c5003b73, S400
[    2.867911] nouveau 0000:00:12.0: bios: version 05.67.32.14.08
[    2.870026] nouveau 0000:00:12.0: fb: 256 MiB of unknown memory type
[    2.925766] [TTM] Zone  kernel: Available graphics memory: 636718 kiB
[    2.925769] [TTM] Initializing pool allocator
[    2.925778] [TTM] Initializing DMA pool allocator
[    2.925797] nouveau 0000:00:12.0: DRM: VRAM: 253 MiB
[    2.925800] nouveau 0000:00:12.0: DRM: GART: 512 MiB
[    2.925806] nouveau 0000:00:12.0: DRM: TMDS table version 1.1
[    2.925809] nouveau 0000:00:12.0: DRM: TMDS table script pointers not stubbed
[    2.925813] nouveau 0000:00:12.0: DRM: DCB version 3.0
[    2.925818] nouveau 0000:00:12.0: DRM: DCB outp 00: 03015323 00000004
[    2.925822] nouveau 0000:00:12.0: DRM: DCB outp 01: 01000310 00000023
[    2.925826] nouveau 0000:00:12.0: DRM: DCB outp 02: 024223f1 0020c070
[    2.925830] nouveau 0000:00:12.0: DRM: DCB conn 00: 0000
[    2.925833] nouveau 0000:00:12.0: DRM: DCB conn 01: 1161
[    2.925836] nouveau 0000:00:12.0: DRM: DCB conn 02: 0210
[    2.925839] nouveau 0000:00:12.0: DRM: DCB conn 03: 0211
[    2.925843] nouveau 0000:00:12.0: DRM: DCB conn 04: 0213
[    2.925846] nouveau 0000:00:12.0: DRM: DCB conn 05: 0340
[    2.926216] nouveau 0000:00:12.0: DRM: Saving VGA fonts
[    2.967865] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.967870] [drm] Driver supports precise vblank timestamp query.
[    2.969991] nouveau 0000:00:12.0: DRM: MM: using M2MF for buffer copies
[    2.970004] nouveau 0000:00:12.0: DRM: Calling LVDS script 6:
[    2.970009] nouveau 0000:00:12.0: DRM: 0xD64E: Parsing digital output script table
[    2.970018] nouveau 0000:00:12.0: DRM: Setting dpms mode 3 on TV encoder (output 2)
[    3.084039] nouveau 0000:00:12.0: DRM: Load detected on output B
[    3.084324] nouveau 0000:00:12.0: DRM: allocated 1440x900 fb: 0x9000, bo ffff8800358b1000
[    3.113153] fbcon: nouveaufb (fb0) is primary device
[    3.192040] nouveau 0000:00:12.0: DRM: Load detected on output B
[    3.212338] nouveau 0000:00:12.0: DRM: Calling LVDS script 2:
[    3.212342] nouveau 0000:00:12.0: DRM: 0xD6BB: Parsing digital output script table
[    3.359195] nouveau 0000:00:12.0: DRM: Calling LVDS script 5:
[    3.359198] nouveau 0000:00:12.0: DRM: 0xD644: Parsing digital output script table
[    3.379496] nouveau 0000:00:12.0: DRM: Setting dpms mode 0 on TV encoder (output 2)
[    3.379502] nouveau 0000:00:12.0: DRM: Output TV-1 is running on CRTC 1 using output B
[    3.476033] nouveau 0000:00:12.0: DRM: Load detected on output B
[    3.476837] Console: switching to colour frame buffer device 90x36
[    3.477608] nouveau 0000:00:12.0: fb0: nouveaufb frame buffer device
[    3.477615] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:12.0 on minor 0
[    3.870550] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[    4.529755] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    4.637138] random: nonblocking pool is initialized
[    5.781624] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.781833] systemd[1]: Detected architecture x86-64.
[    5.793804] systemd[1]: Set hostname to <pc12>.
[    7.431571] systemd[1]: Listening on Journal Audit Socket.
[    7.431725] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.431920] systemd[1]: Created slice System Slice.
[    7.432161] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.432281] systemd[1]: Created slice User and Session Slice.
[    7.432345] systemd[1]: Listening on udev Kernel Socket.
[    7.432415] systemd[1]: Listening on udev Control Socket.
[    7.432667] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.432736] systemd[1]: Listening on Syslog Socket.
[    7.432801] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.432891] systemd[1]: Listening on Journal Socket.
[    7.433885] systemd[1]: Started Braille Device Support.
[    7.440554] systemd[1]: Starting Journal Service...
[    7.441867] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.443109] systemd[1]: Mounting RPC Pipe File System...
[    7.448561] systemd[1]: Starting Set console keymap...
[    7.450084] systemd[1]: Starting Nameserver information manager...
[    7.451343] systemd[1]: Mounting NFSD configuration filesystem...
[    7.454864] systemd[1]: Mounting POSIX Message Queue File System...
[    7.454965] systemd[1]: Reached target Encrypted Volumes.
[    7.455173] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.455238] systemd[1]: Reached target Slices.
[    7.646371] systemd[1]: Reached target User and Group Name Lookups.
[    7.646486] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    7.647551] systemd[1]: Mounting Huge Pages File System...
[    7.662133] systemd[1]: Starting Load Kernel Modules...
[    7.663230] systemd[1]: Mounting Debug File System...
[    7.663293] systemd[1]: PNFS blkmaping enablement. is not active.
[    7.663567] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[    7.663665] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[    7.664874] systemd[1]: Started Read required files in advance.
[    7.665321] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.666522] systemd[1]: Starting Uncomplicated firewall...
[    7.838707] systemd[1]: Started Uncomplicated firewall.
[    7.888308] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.889695] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.159215] lp: driver loaded but no devices found
[    8.160872] systemd[1]: Started Journal Service.
[    8.178591] ppdev: user-space parallel port driver
[    9.147024] RPC: Registered named UNIX socket transport module.
[    9.147030] RPC: Registered udp transport module.
[    9.147033] RPC: Registered tcp transport module.
[    9.147035] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.275375] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.299022] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[   11.402808] systemd-journald[204]: Received request to flush runtime journal from PID 1
[   12.423406] i2c i2c-4: nForce2 SMBus adapter at 0x3040
[   12.423491] i2c i2c-5: nForce2 SMBus adapter at 0x3000
[   12.560953] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0
[   12.560958] ene_ir: PLL freq = 1406
[   12.560960] ene_ir: KB3926B detected
[   12.596026] Registered IR keymap rc-rc6-mce
[   12.596199] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   12.596317] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   12.605984] IR NEC protocol handler initialized
[   12.614003] IR RC5(x/sz) protocol handler initialized
[   12.623818] IR RC6 protocol handler initialized
[   12.626062] IR JVC protocol handler initialized
[   12.634005] IR Sony protocol handler initialized
[   12.647546] IR SANYO protocol handler initialized
[   12.649866] IR Sharp protocol handler initialized
[   12.660796] IR MCE Keyboard/mouse protocol handler initialized
[   12.665718] lirc_dev: IR Remote Control driver registered, major 246 
[   12.667748] IR XMP protocol handler initialized
[   12.674200] IR LIRC bridge handler initialized
[   12.674934] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   12.675113] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   12.675147] ene_ir: driver has been successfully loaded
[   12.974905] r592: driver successfully loaded
[   13.070690] media: Linux media interface: v0.10
[   13.133662] r852: driver loaded successfully
[   13.183867] Linux video capture interface: v2.00
[   13.286758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.489675] EDAC MC: Ver: 3.0.0
[   13.510245] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   13.510264] snd_hda_intel 0000:00:07.0: Disabling MSI
[   13.589609] MCE: In-kernel MCE decoding enabled.
[   13.593339] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   13.716908] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
[   13.737297] AMD64 EDAC driver v3.4.0
[   13.737352] EDAC amd64: DRAM ECC disabled.
[   13.737357] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.783490] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input10
[   13.783613] usbcore: registered new interface driver uvcvideo
[   13.783616] USB Video Class driver (1.1.1)
[   13.896078] nouveau 0000:00:12.0: DRM: Load detected on output B
[   14.013487] ath5k 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[   14.013775] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[   14.013897] ath5k 0000:05:00.0: registered as 'phy0'
[   14.445231] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[   14.445240] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.445244] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   14.445247] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.445250] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   14.445253] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.445258] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   14.445262] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   14.445265] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.737086] ath: EEPROM regdomain: 0x65
[   14.737092] ath: EEPROM indicates we should expect a direct regpair map
[   14.737098] ath: Country alpha2 being used: 00
[   14.737100] ath: Regpair used: 0x65
[   14.788820] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.789322] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   15.356898] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[   15.357017] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[   15.357114] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[   16.185522] acer_wmi: Acer Laptop ACPI-WMI Extras
[   16.190476] acer_wmi: Function bitmap for Communication Device: 0x1
[   16.228757] ath5k 0000:05:00.0 wlp5s0: renamed from wlan0
[   17.566862] cfg80211: World regulatory domain updated:
[   17.566871] cfg80211:  DFS Master region: unset
[   17.566874] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.566878] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.566881] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.566884] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.566888] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.566891] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   17.566895] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.566898] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.566901] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.765983] Adding 2048252k swap on /dev/sda7.  Priority:-1 extents:1 across:2048252k FS
[   24.882400] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   25.436524] audit: type=1400 audit(1529743996.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=705 comm="apparmor_parser"
[   25.436540] audit: type=1400 audit(1529743996.112:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=705 comm="apparmor_parser"
[   25.449986] audit: type=1400 audit(1529743996.124:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=706 comm="apparmor_parser"
[   25.450002] audit: type=1400 audit(1529743996.124:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
[   25.450011] audit: type=1400 audit(1529743996.124:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=706 comm="apparmor_parser"
[   25.450020] audit: type=1400 audit(1529743996.124:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[   25.511387] audit: type=1400 audit(1529743996.184:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=707 comm="apparmor_parser"
[   25.511404] audit: type=1400 audit(1529743996.184:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=707 comm="apparmor_parser"
[   25.511413] audit: type=1400 audit(1529743996.184:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=707 comm="apparmor_parser"
[   25.511422] audit: type=1400 audit(1529743996.184:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=707 comm="apparmor_parser"
[   29.501249] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   29.530218] NFSD: starting 90-second grace period (net ffffffff81efaa40)
[   29.566372] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   29.575645] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   29.590938] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   29.591646] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[   29.591881] forcedeth 0000:00:0a.0 enp0s10: no link during initialization
[   29.593069] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   29.842071] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   37.452036] nouveau 0000:00:12.0: DRM: Load detected on output B
[   37.548039] nouveau 0000:00:12.0: DRM: Load detected on output B
[   40.209714] wlp5s0: authenticate with 16:b0:28:85:60:f0
[   40.220213] wlp5s0: send auth to 16:b0:28:85:60:f0 (try 1/3)
[   40.222749] wlp5s0: authenticated
[   40.223028] ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use
[   40.224179] wlp5s0: associate with 16:b0:28:85:60:f0 (try 1/3)
[   40.229819] wlp5s0: RX AssocResp from 16:b0:28:85:60:f0 (capab=0x411 status=0 aid=3)
[   40.229919] wlp5s0: associated
[   40.229977] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   45.202905] FS-Cache: Loaded
[   45.444207] FS-Cache: Netfs 'nfs' registered for caching
[   45.532225] nouveau 0000:00:12.0: DRM: Load detected on output B
[   46.963123] nouveau 0000:00:12.0: DRM: Setting dpms mode 3 on TV encoder (output 2)
[   49.468089] nouveau 0000:00:12.0: DRM: Load detected on output B
[   49.612070] nouveau 0000:00:12.0: DRM: Load detected on output B
[  766.908058] usb 3-2: new full-speed USB device number 2 using ohci-pci
[  767.129107] usb 3-2: New USB device found, idVendor=046d, idProduct=c534
[  767.129122] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  767.129130] usb 3-2: Product: USB Receiver
[  767.129137] usb 3-2: Manufacturer: Logitech
[  767.465840] hidraw: raw HID events driver (C) Jiri Kosina
[  767.500971] usbcore: registered new interface driver usbhid
[  767.500978] usbhid: USB HID core driver
[  767.548106] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input14
[  767.605630] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[  767.606948] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input15
[  767.674353] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1

Le ssd suit dans quelques minutes ...


Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#29 Le 23/06/2018, à 10:19

Crestey

Re : [Résolu] Interprétation d'un test disque dur

Et voilà pour le ssd :

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz root=UUID=b13b59a0-484a-43b5-93cd-f97dc99e286c ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004ff4ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000004ff50000-0x000000004ff64fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000004ff65000-0x000000004ff65fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000004ff66000-0x000000005fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Acer             Aspire 7220     /Fuquene, BIOS V1.04 07/04/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x4ff50 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f7cd0-0x000f7cdf] mapped at [ffff98bac00f7cd0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff98bac0098000] 98000 size 24576
[    0.000000] BRK [0x46b2c000, 0x46b2cfff] PGTABLE
[    0.000000] BRK [0x46b2d000, 0x46b2dfff] PGTABLE
[    0.000000] BRK [0x46b2e000, 0x46b2efff] PGTABLE
[    0.000000] BRK [0x46b2f000, 0x46b2ffff] PGTABLE
[    0.000000] BRK [0x46b30000, 0x46b30fff] PGTABLE
[    0.000000] BRK [0x46b31000, 0x46b31fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32268000-0x3512bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7CE0 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000004FF5E4F4 00005C (v01 ACRSYS ACRPRDCT 06040000  LTP 00000000)
[    0.000000] ACPI: SLIC 0x000000004FF64BAC 000176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
[    0.000000] ACPI: FACP 0x000000004FF64D22 0000F4 (v03 NVIDIA MCP67-M  06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 0x000000004FF5E550 0065E8 (v01 NVIDIA MCP67    06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000004FF65FC0 000040
[    0.000000] ACPI: FACS 0x000000004FF65FC0 000040
[    0.000000] ACPI: SSDT 0x000000004FF64E16 0000F4 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: MCFG 0x000000004FF64F0A 00003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000)
[    0.000000] ACPI: HPET 0x000000004FF64F46 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x000000004FF64F7E 00005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000004FF64FD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000004ff4ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x4ff25000-0x4ff4ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000004ff4ffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000004ff4ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004ff4ffff]
[    0.000000] On node 0 totalpages: 327405
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5054 pages used for memmap
[    0.000000]   DMA32 zone: 323408 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff98bb0fc00000 s146584 r8192 d29544 u2097152
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 322266
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=b13b59a0-484a-43b5-93cd-f97dc99e286c ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x4f10000000-0x4f11ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1214888K/1309620K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 94732K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 524544, nr_irqs: 256, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1800.387 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.77 BogoMIPS (lpj=7201548)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.012472] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.012519] Security Framework initialized
[    0.012522] Yama: becoming mindful.
[    0.012554] AppArmor: AppArmor initialized
[    0.014347] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015260] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015316] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015346] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015769] FEATURE SPEC_CTRL Not Present
[    0.015770] FEATURE IBPB Not Present
[    0.015773] mce: CPU supports 5 MCE banks
[    0.015784] LVT offset 0 assigned for vector 0xf9
[    0.015787] process: using AMD E400 aware idle routine
[    0.015790] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.015791] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.015794] Spectre V2 mitigation: LFENCE not serializing. Switching to generic retpoline
[    0.015854] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.015855] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.015857] Spectre V2 mitigation: Filling RSB on context switch
[    0.033152] Freeing SMP alternatives memory: 36K
[    0.036323] smpboot: Max logical packages: 1
[    0.036883] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Mobile AMD Sempron(tm) Processor 3500+ (family: 0xf, model: 0x4c, stepping: 0x2)
[    0.080000] Performance Events: AMD PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              48
[    0.080000] ... generic registers:      4
[    0.080000] ... value mask:             0000ffffffffffff
[    0.080000] ... max period:             00007fffffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000000000f
[    0.080000] Hierarchical SRCU implementation.
[    0.080000] smp: Bringing up secondary CPUs ...
[    0.080000] smp: Brought up 1 node, 1 CPU
[    0.080000] smpboot: Total of 1 processors activated (3600.77 BogoMIPS)
[    0.080000] devtmpfs: initialized
[    0.080000] x86/mm: Memory block size: 128MB
[    0.080000] evm: security.selinux
[    0.080000] evm: security.SMACK64
[    0.080000] evm: security.SMACK64EXEC
[    0.080000] evm: security.SMACK64TRANSMUTE
[    0.080000] evm: security.SMACK64MMAP
[    0.080000] evm: security.ima
[    0.080000] evm: security.capability
[    0.080000] PM: Registering ACPI NVS region [mem 0x4ff65000-0x4ff65fff] (4096 bytes)
[    0.080000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080000] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.080000] pinctrl core: initialized pinctrl subsystem
[    0.080000] RTC time:  9:15:14, date: 06/23/18
[    0.080000] NET: Registered protocol family 16
[    0.080000] cpuidle: using governor ladder
[    0.080000] cpuidle: using governor menu
[    0.080000] PCCT header not found.
[    0.080000] node 0 link 0: io port [1000, fffff]
[    0.080000] TOM: 0000000060000000 aka 1536M
[    0.080000] node 0 link 0: mmio [a0000, bffff]
[    0.080000] node 0 link 0: mmio [60000000, dfffffff]
[    0.080000] node 0 link 0: mmio [e0000000, efffffff]
[    0.080000] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.080000] bus: [bus 00-ff] on node 0 link 0
[    0.080000] bus: 00 [io  0x0000-0xffff]
[    0.080000] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.080000] bus: 00 [mem 0x60000000-0xfcffffffff]
[    0.080000] Simple Boot Flag at 0x36 set to 0x1
[    0.080000] ACPI: bus type PCI registered
[    0.080000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.080000] PCI: Using configuration type 1 for base access
[    0.081491] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.081696] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.082049] ACPI: Added _OSI(Module Device)
[    0.082051] ACPI: Added _OSI(Processor Device)
[    0.082052] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.082053] ACPI: Added _OSI(Processor Aggregator Device)
[    0.085960] ACPI: EC: EC started
[    0.085961] ACPI: EC: interrupt blocked
[    0.086107] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.086110] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x10, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.086112] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.086113] ACPI: Interpreter enabled
[    0.086142] ACPI: (supports S0 S3 S4 S5)
[    0.086144] ACPI: Using IOAPIC for interrupt routing
[    0.086174] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.086557] ACPI: Enabled 11 GPEs in block 00 to 1F
[    0.181028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.181038] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.181045] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.181124] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff])
[    0.181490] PCI host bridge to bus 0000:00
[    0.181493] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.181496] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.181499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.181501] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.181503] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.181506] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.181508] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.181511] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.181513] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.181515] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.181518] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.181520] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.181522] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.181525] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.181527] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.181530] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.181532] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfebfffff window]
[    0.181535] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.181557] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000
[    0.181853] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100
[    0.181863] pci 0000:00:01.0: reg 0x10: [io  0x1d00-0x1dff]
[    0.182025] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500
[    0.182038] pci 0000:00:01.1: reg 0x10: [io  0x3080-0x30bf]
[    0.182054] pci 0000:00:01.1: reg 0x20: [io  0x3040-0x307f]
[    0.182060] pci 0000:00:01.1: reg 0x24: [io  0x3000-0x303f]
[    0.182090] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.182225] pci 0000:00:01.2: [10de:0541] type 00 class 0x050000
[    0.182377] pci 0000:00:01.3: [10de:0543] type 00 class 0x0b4000
[    0.182402] pci 0000:00:01.3: reg 0x10: [mem 0xf2400000-0xf247ffff]
[    0.182624] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310
[    0.182636] pci 0000:00:02.0: reg 0x10: [mem 0xf2686000-0xf2686fff]
[    0.182675] pci 0000:00:02.0: supports D1 D2
[    0.182677] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.182810] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320
[    0.182822] pci 0000:00:02.1: reg 0x10: [mem 0xf2689000-0xf26890ff]
[    0.182866] pci 0000:00:02.1: supports D1 D2
[    0.182868] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183008] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310
[    0.183020] pci 0000:00:04.0: reg 0x10: [mem 0xf2687000-0xf2687fff]
[    0.183059] pci 0000:00:04.0: supports D1 D2
[    0.183061] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183192] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320
[    0.183205] pci 0000:00:04.1: reg 0x10: [mem 0xf2689400-0xf26894ff]
[    0.183248] pci 0000:00:04.1: supports D1 D2
[    0.183250] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.183394] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a
[    0.183419] pci 0000:00:06.0: reg 0x20: [io  0x30c0-0x30cf]
[    0.183430] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.183432] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.183434] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.183436] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.183582] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300
[    0.183595] pci 0000:00:07.0: reg 0x10: [mem 0xf2680000-0xf2683fff]
[    0.183640] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.183786] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401
[    0.183958] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185
[    0.183969] pci 0000:00:09.0: reg 0x10: [io  0x30f0-0x30f7]
[    0.183973] pci 0000:00:09.0: reg 0x14: [io  0x30e4-0x30e7]
[    0.183978] pci 0000:00:09.0: reg 0x18: [io  0x30e8-0x30ef]
[    0.183983] pci 0000:00:09.0: reg 0x1c: [io  0x30e0-0x30e3]
[    0.183988] pci 0000:00:09.0: reg 0x20: [io  0x30d0-0x30df]
[    0.183993] pci 0000:00:09.0: reg 0x24: [mem 0xf2684000-0xf2685fff]
[    0.184166] pci 0000:00:0a.0: [10de:054c] type 00 class 0x020000
[    0.184177] pci 0000:00:0a.0: reg 0x10: [mem 0xf2688000-0xf2688fff]
[    0.184182] pci 0000:00:0a.0: reg 0x14: [io  0x30f8-0x30ff]
[    0.184187] pci 0000:00:0a.0: reg 0x18: [mem 0xf2689c00-0xf2689cff]
[    0.184192] pci 0000:00:0a.0: reg 0x1c: [mem 0xf2689800-0xf268980f]
[    0.184226] pci 0000:00:0a.0: supports D1 D2
[    0.184228] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184370] pci 0000:00:0c.0: [10de:0563] type 01 class 0x060400
[    0.184410] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184559] pci 0000:00:0d.0: [10de:0563] type 01 class 0x060400
[    0.184595] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184745] pci 0000:00:12.0: [10de:0533] type 00 class 0x030000
[    0.184754] pci 0000:00:12.0: reg 0x10: [mem 0xf1000000-0xf1ffffff]
[    0.184760] pci 0000:00:12.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.184766] pci 0000:00:12.0: reg 0x1c: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.184773] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.184922] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.185058] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.185203] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.185343] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.185538] pci 0000:01:04.0: [1180:0832] type 00 class 0x0c0010
[    0.185547] pci 0000:01:04.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.185549] pci 0000:01:04.0: MMC cards are now supported by standard SDHCI controller
[    0.185563] pci 0000:01:04.0: reg 0x10: [mem 0xf2300000-0xf23007ff]
[    0.185621] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[    0.185687] pci 0000:01:04.1: [1180:0822] type 00 class 0x080500
[    0.185702] pci 0000:01:04.1: reg 0x10: [mem 0xf2300800-0xf23008ff]
[    0.185760] pci 0000:01:04.1: supports D1 D2
[    0.185762] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185822] pci 0000:01:04.2: [1180:0592] type 00 class 0x088000
[    0.185838] pci 0000:01:04.2: reg 0x10: [mem 0xf2301000-0xf23010ff]
[    0.185895] pci 0000:01:04.2: supports D1 D2
[    0.185897] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185957] pci 0000:01:04.3: [1180:0852] type 00 class 0x088000
[    0.185973] pci 0000:01:04.3: reg 0x10: [mem 0xf2301400-0xf23014ff]
[    0.186030] pci 0000:01:04.3: supports D1 D2
[    0.186032] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186112] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[    0.186117] pci 0000:00:08.0:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.186121] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.186123] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.186126] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.186128] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.186131] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.186133] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.186136] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.186138] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.186141] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.186143] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.186146] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.186148] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.186151] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.186153] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.186155] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.186158] pci 0000:00:08.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.186161] pci 0000:00:08.0:   bridge window [mem 0x60000000-0xfebfffff window] (subtractive decode)
[    0.186234] acpiphp: Slot [1] registered
[    0.186239] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[    0.186243] pci 0000:00:0c.0:   bridge window [io  0x4000-0x4fff]
[    0.186246] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.186250] pci 0000:00:0c.0:   bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.186315] pci 0000:05:00.0: [168c:001c] type 00 class 0x020000
[    0.186339] pci 0000:05:00.0: reg 0x10: [mem 0xf2200000-0xf220ffff 64bit]
[    0.186496] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.186504] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.186509] pci 0000:00:0d.0:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.228405] ACPI: PCI Interrupt Link [LNK1] (IRQs 16) *10
[    0.228526] ACPI: PCI Interrupt Link [LNK2] (IRQs 16) *11
[    0.228646] ACPI: PCI Interrupt Link [LNK3] (IRQs 17 18 19) *0, disabled.
[    0.228766] ACPI: PCI Interrupt Link [LNK4] (IRQs 17 18 19) *0, disabled.
[    0.228886] ACPI: PCI Interrupt Link [LK1E] (IRQs 17 18 19) *0, disabled.
[    0.229005] ACPI: PCI Interrupt Link [LK2E] (IRQs 17 18 19) *0, disabled.
[    0.229124] ACPI: PCI Interrupt Link [LK3E] (IRQs 17 18 19) *0, disabled.
[    0.229243] ACPI: PCI Interrupt Link [LK4E] (IRQs 17 18 19) *10
[    0.229361] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *10
[    0.229481] ACPI: PCI Interrupt Link [LUS0] (IRQs 21 22 23) *11
[    0.229599] ACPI: PCI Interrupt Link [LUS2] (IRQs 21 22 23) *7
[    0.229721] ACPI: PCI Interrupt Link [LMAC] (IRQs 21 22 23) *11
[    0.229840] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[    0.229959] ACPI: PCI Interrupt Link [LGPU] (IRQs 20) *10
[    0.230077] ACPI: PCI Interrupt Link [LPID] (IRQs 21 22 23) *0, disabled.
[    0.230196] ACPI: PCI Interrupt Link [LSI0] (IRQs 21 22 23) *5
[    0.230317] ACPI: PCI Interrupt Link [Z00N] (IRQs 21 22 23) *10
[    0.230437] ACPI: PCI Interrupt Link [Z00O] (IRQs 21 22 23) *11
[    0.230560] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *11
[    0.230789] ACPI Warning: GPE type mismatch (level/edge) (20170531/evxface-826)
[    0.230794] ACPI: EC: interrupt unblocked
[    0.230803] ACPI: EC: event unblocked
[    0.230813] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x10, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.230815] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.231265] SCSI subsystem initialized
[    0.231350] libata version 3.00 loaded.
[    0.231428] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    0.231432] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.231438] pci 0000:00:12.0: vgaarb: bridge control possible
[    0.231439] vgaarb: loaded
[    0.231481] ACPI: bus type USB registered
[    0.231506] usbcore: registered new interface driver usbfs
[    0.231520] usbcore: registered new interface driver hub
[    0.231535] usbcore: registered new device driver usb
[    0.231636] EDAC MC: Ver: 3.0.0
[    0.231860] PCI: Using ACPI for IRQ routing
[    0.238410] PCI: pci_cache_line_size set to 64 bytes
[    0.238486] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.238488] e820: reserve RAM buffer [mem 0x4ff50000-0x4fffffff]
[    0.238652] NetLabel: Initializing
[    0.238653] NetLabel:  domain hash size = 128
[    0.238654] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.238687] NetLabel:  unlabeled traffic allowed by default
[    0.238849] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.238855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.238860] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.240062] clocksource: Switched to clocksource hpet
[    0.266547] VFS: Disk quotas dquot_6.6.0
[    0.266592] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.266811] AppArmor: AppArmor Filesystem Enabled
[    0.266908] pnp: PnP ACPI init
[    0.267277] system 00:00: [io  0x0360-0x0361] has been reserved
[    0.267280] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.267287] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267364] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.312103] pnp 00:02: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.312169] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.312174] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312236] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.312331] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.312592] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.312595] system 00:06: [io  0x1080-0x10ff] has been reserved
[    0.312597] system 00:06: [io  0x1400-0x147f] has been reserved
[    0.312600] system 00:06: [io  0x1480-0x14ff] has been reserved
[    0.312602] system 00:06: [io  0x1800-0x187f] has been reserved
[    0.312604] system 00:06: [io  0x1880-0x18ff] has been reserved
[    0.312609] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.313079] system 00:07: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.313082] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.313085] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.313087] system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.313090] system 00:07: [mem 0xfef00000-0xfef00fff] has been reserved
[    0.313094] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.313100] pnp: PnP ACPI: found 8 devices
[    0.320040] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.320106] pci 0000:00:12.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[    0.320113] pci 0000:00:08.0: PCI bridge to [bus 01]
[    0.320118] pci 0000:00:08.0:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.320123] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[    0.320126] pci 0000:00:0c.0:   bridge window [io  0x4000-0x4fff]
[    0.320129] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.320132] pci 0000:00:0c.0:   bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.320136] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.320139] pci 0000:00:0d.0:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.320146] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.320148] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.320150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.320152] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.320155] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.320157] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.320159] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.320161] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.320163] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.320165] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.320167] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.320169] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.320171] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.320173] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.320175] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.320177] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.320180] pci_bus 0000:00: resource 20 [mem 0x60000000-0xfebfffff window]
[    0.320182] pci_bus 0000:01: resource 1 [mem 0xf2300000-0xf23fffff]
[    0.320184] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.320186] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.320188] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.320190] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.320192] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.320194] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.320196] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.320198] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.320200] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.320203] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.320205] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.320207] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.320209] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.320211] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff window]
[    0.320213] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.320215] pci_bus 0000:01: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.320217] pci_bus 0000:01: resource 20 [mem 0x60000000-0xfebfffff window]
[    0.320219] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.320221] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf21fffff]
[    0.320223] pci_bus 0000:03: resource 2 [mem 0xf2800000-0xf29fffff 64bit pref]
[    0.320226] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[    0.320424] NET: Registered protocol family 2
[    0.320755] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.320875] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.321037] TCP: Hash tables configured (established 16384 bind 16384)
[    0.321162] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.321199] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.321328] NET: Registered protocol family 1
[    0.321712] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[    0.380297] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[    0.380567] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
[    0.440256] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 23
[    0.440369] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440418] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440470] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440526] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440584] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440646] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440656] pci 0000:00:12.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.440684] PCI: CLS 64 bytes, default 64
[    0.440776] Unpacking initramfs...
[    1.758128] Freeing initrd memory: 47888K
[    1.758688] Scanning for low memory corruption every 60 seconds
[    1.759078] audit: initializing netlink subsys (disabled)
[    1.759622] Initialise system trusted keyrings
[    1.759641] Key type blacklist registered
[    1.759676] audit: type=2000 audit(1529745314.759:1): state=initialized audit_enabled=0 res=1
[    1.759696] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    1.762384] zbud: loaded
[    1.763288] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.763621] fuse init (API version 7.26)
[    1.765620] Key type asymmetric registered
[    1.765623] Asymmetric key parser 'x509' registered
[    1.765719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.765769] io scheduler noop registered
[    1.765770] io scheduler deadline registered
[    1.765826] io scheduler cfq registered (default)
[    1.785272] ACPI: AC Adapter [ACAD] (off-line)
[    1.801752] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.840317] ACPI: Lid Switch [LID]
[    1.840386] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.840399] ACPI: Sleep Button [SLPB]
[    1.840478] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.840489] ACPI: Power Button [PWRB]
[    1.840546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.840561] ACPI: Power Button [PWRF]
[    1.840618] tsc: Marking TSC unstable due to TSC halts in idle
[    1.938200] ACPI: Invalid active0 threshold
[    1.962754] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.986460] thermal LNXTHERM:00: registered as thermal_zone0
[    1.986462] ACPI: Thermal Zone [THRM] (52 C)
[    1.986583] GHES: HEST is not enabled!
[    1.986768] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.989400] Linux agpgart interface v0.103
[    1.991901] loop: module loaded
[    1.992340] libphy: Fixed MDIO Bus: probed
[    1.992342] tun: Universal TUN/TAP device driver, 1.6
[    1.992411] PPP generic driver version 2.4.2
[    1.992478] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.992482] ehci-pci: EHCI PCI platform driver
[    1.992636] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.992646] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.992659] ehci-pci 0000:00:02.1: debug port 1
[    1.992698] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.992850] ehci-pci 0000:00:02.1: irq 22, io mem 0xf2689000
[    2.008035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.008132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.008135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.008137] usb usb1: Product: EHCI Host Controller
[    2.008139] usb usb1: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    2.008141] usb usb1: SerialNumber: 0000:00:02.1
[    2.008324] hub 1-0:1.0: USB hub found
[    2.008337] hub 1-0:1.0: 5 ports detected
[    2.008653] ehci-pci 0000:00:04.1: EHCI Host Controller
[    2.008661] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[    2.008670] ehci-pci 0000:00:04.1: debug port 1
[    2.008700] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    2.008724] ehci-pci 0000:00:04.1: irq 23, io mem 0xf2689400
[    2.024035] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    2.024113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.024116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.024118] usb usb2: Product: EHCI Host Controller
[    2.024120] usb usb2: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    2.024122] usb usb2: SerialNumber: 0000:00:04.1
[    2.024283] hub 2-0:1.0: USB hub found
[    2.024293] hub 2-0:1.0: 5 ports detected
[    2.024513] ehci-platform: EHCI generic platform driver
[    2.024539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.024543] ohci-pci: OHCI PCI platform driver
[    2.024629] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.024637] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[    2.024661] ohci-pci 0000:00:02.0: irq 23, io mem 0xf2686000
[    2.086079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.086082] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.086083] usb usb3: Product: OHCI PCI host controller
[    2.086085] usb usb3: Manufacturer: Linux 4.13.0-45-generic ohci_hcd
[    2.086087] usb usb3: SerialNumber: 0000:00:02.0
[    2.086244] hub 3-0:1.0: USB hub found
[    2.086255] hub 3-0:1.0: 5 ports detected
[    2.086535] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    2.086546] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[    2.086599] ohci-pci 0000:00:04.0: irq 21, io mem 0xf2687000
[    2.146098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.146100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.146102] usb usb4: Product: OHCI PCI host controller
[    2.146104] usb usb4: Manufacturer: Linux 4.13.0-45-generic ohci_hcd
[    2.146106] usb usb4: SerialNumber: 0000:00:04.0
[    2.146287] hub 4-0:1.0: USB hub found
[    2.146299] hub 4-0:1.0: 5 ports detected
[    2.146650] ohci-platform: OHCI generic platform driver
[    2.146671] uhci_hcd: USB Universal Host Controller Interface driver
[    2.146783] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    2.177891] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.177937] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.178133] mousedev: PS/2 mouse device common for all mice
[    2.180292] rtc_cmos 00:01: RTC can wake from S4
[    2.180468] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.180514] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.180524] i2c /dev entries driver
[    2.180623] device-mapper: uevent: version 1.0.3
[    2.180738] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.180757] ledtrig-cpu: registered to indicate activity on CPUs
[    2.181353] NET: Registered protocol family 10
[    2.190165] Segment Routing with IPv6
[    2.190204] NET: Registered protocol family 17
[    2.190222] Key type dns_resolver registered
[    2.190455] RAS: Correctable Errors collector initialized.
[    2.190665] registered taskstats version 1
[    2.190680] Loading compiled-in X.509 certificates
[    2.196544] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    2.196590] zswap: loaded using pool lzo/zbud
[    2.204833] Key type big_key registered
[    2.204840] Key type trusted registered
[    2.205460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.210271] Key type encrypted registered
[    2.210277] AppArmor: AppArmor sha1 policy hashing enabled
[    2.210281] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.210320] evm: HMAC attrs: 0x1
[    2.210666]   Magic number: 6:401:273
[    2.210686] usb usb1-port1: hash matches
[    2.210726] tty tty10: hash matches
[    2.210736] net lo: hash matches
[    2.210838] rtc_cmos 00:01: setting system clock to 2018-06-23 09:15:16 UTC (1529745316)
[    2.211098] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[    2.211099] powernow_k8: fid 0x8 (1600 MHz), vid 0x12
[    2.211101] powernow_k8: fid 0x0 (800 MHz), vid 0x18
[    2.211126] powernow_k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ (1 cpu cores) (version 2.20.00)
[    2.211134] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.211134] EDD information not available.
[    2.211189] PM: Hibernation image not present or could not be loaded.
[    2.393178] ACPI: Battery Slot [BAT1] (battery present)
[    2.399450] Freeing unused kernel memory: 2368K
[    2.404030] Write protecting the kernel read-only data: 18432k
[    2.406187] Freeing unused kernel memory: 2024K
[    2.406609] Freeing unused kernel memory: 84K
[    2.410928] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.613625] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[    2.613687] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.613875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.660063] usb 3-2: new full-speed USB device number 2 using ohci-pci
[    2.672837] pata_amd 0000:00:06.0: version 0.4.1
[    2.680107] scsi host0: pata_amd
[    2.684156] scsi host1: pata_amd
[    2.684262] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    2.684264] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    2.686795] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[    2.698504] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    2.698811] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    2.704753] sdhci: Secure Digital Host Controller Interface driver
[    2.704755] sdhci: Copyright(c) Pierre Ossman
[    2.707313] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
[    2.707584] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 16
[    2.707652] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.707660] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.707876] mmc0: SDHCI controller on PCI [0000:01:04.1] using DMA
[    2.707887] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.732380] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16
[    2.785652] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f39741c32, max_idle_ns: 440795290228 ns
[    2.792544] firewire_ohci 0000:01:04.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.864313] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[    2.864325] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
[    2.888238] ata1.00: configured for UDMA/33
[    2.895072] usb 3-2: New USB device found, idVendor=046d, idProduct=c534
[    2.895075] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.895077] usb 3-2: Product: USB Receiver
[    2.895078] usb 3-2: Manufacturer: Logitech
[    2.895841] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
[    2.916865] hidraw: raw HID events driver (C) Jiri Kosina
[    2.927634] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.927638] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.927852] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.928058] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.928149] ata2: port disabled--ignoring
[    2.939277] usbcore: registered new interface driver usbhid
[    2.939280] usbhid: USB HID core driver
[    2.946052] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input8
[    3.004321] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[    3.005303] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input9
[    3.064998] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[    3.232050] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    3.249530] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:22:ed:0d
[    3.249533] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    3.249754] ahci 0000:00:09.0: version 3.0
[    3.249887] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[    3.249889] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[    3.249952] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    3.249957] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part 
[    3.252888] forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
[    3.255966] scsi host2: ahci
[    3.257036] scsi host3: ahci
[    3.257326] scsi host4: ahci
[    3.257570] scsi host5: ahci
[    3.257646] ata3: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684100 irq 22
[    3.257648] ata4: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684180 irq 22
[    3.257650] ata5: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684200 irq 22
[    3.257652] ata6: SATA max UDMA/133 abar m8192@0xf2684000 port 0xf2684280 irq 22
[    3.296188] firewire_core 0000:01:04.0: created device fw0: GUID 00023f77c5003b73, S400
[    3.570553] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.570569] ata4: SATA link down (SStatus 0 SControl 300)
[    3.570590] ata5: SATA link down (SStatus 0 SControl 300)
[    3.574557] ata6: SATA link down (SStatus 0 SControl 300)
[    3.574790] ata3.00: ATA-10: KINGSTON SA400S37120G, R0105A, max UDMA/133
[    3.574793] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    3.582811] ata3.00: configured for UDMA/133
[    3.583016] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 5A   PQ: 0 ANSI: 5
[    3.584503] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.584742] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.584762] sd 2:0:0:0: [sda] Write Protect is off
[    3.584766] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.584796] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.586962]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
[    3.587714] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.673908] usb 1-3: New USB device found, idVendor=5986, idProduct=0102
[    3.673913] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.673915] usb 1-3: Product: Acer Crystal Eye webcam
[    3.941405] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    4.138583] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.138784] systemd[1]: Detected architecture x86-64.
[    4.139172] systemd[1]: Set hostname to <pc12>.
[    4.140863] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[    4.289393] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.289494] systemd[1]: Reached target Encrypted Volumes.
[    4.289597] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    4.289708] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.289740] systemd[1]: PNFS blkmaping enablement. is not active.
[    4.290156] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[    4.290474] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[    4.384624] lp: driver loaded but no devices found
[    4.394231] ppdev: user-space parallel port driver
[    4.552309] RPC: Registered named UNIX socket transport module.
[    4.552312] RPC: Registered udp transport module.
[    4.552313] RPC: Registered tcp transport module.
[    4.552314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.675350] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.043113] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    5.140585] systemd-journald[249]: Received request to flush runtime journal from PID 1
[    5.718334] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    5.759175] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0
[    5.759178] ene_ir: PLL freq = 1406
[    5.759179] ene_ir: KB3926B detected
[    5.777907] lirc_dev: IR Remote Control driver registered, major 244
[    5.779907] IR LIRC bridge handler initialized
[    5.924769] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[    5.924847] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[    5.944078] Registered IR keymap rc-rc6-mce
[    5.960433] IR RC6 protocol handler initialized
[    5.996179] rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[    5.996250] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[    5.999139] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[    5.999171] ene_ir: driver has been successfully loaded
[    6.193604] media: Linux media interface: v0.10
[    6.196435] r592: driver successfully loaded
[    6.401999] Linux video capture interface: v2.00
[    6.420597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.458161] r852: driver loaded successfully
[    6.622528] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    6.622542] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.859447] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
[    6.923767] uvcvideo 1-3:1.0: Entity type for entity Extension 6 was not initialized!
[    6.923773] uvcvideo 1-3:1.0: Entity type for entity Processing 5 was not initialized!
[    6.923775] uvcvideo 1-3:1.0: Entity type for entity Selector 4 was not initialized!
[    6.923777] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[    6.923885] input: Acer Crystal Eye webcam: Acer C as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input11
[    6.923986] usbcore: registered new interface driver uvcvideo
[    6.923987] USB Video Class driver (1.1.1)
[    7.070433] MCE: In-kernel MCE decoding enabled.
[    7.132231] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.132235] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    7.386604] nvidia: loading out-of-tree module taints kernel.
[    7.386614] nvidia: module license 'NVIDIA' taints kernel.
[    7.386615] Disabling lock debugging due to kernel taint
[    7.636799] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[    7.636815] snd_hda_intel 0000:00:07.0: Disabling MSI
[    7.645473] ath5k 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.645750] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[    7.645875] ath5k 0000:05:00.0: registered as 'phy0'
[    7.988505] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    8.177710] ath: EEPROM regdomain: 0x65
[    8.177713] ath: EEPROM indicates we should expect a direct regpair map
[    8.177716] ath: Country alpha2 being used: 00
[    8.177717] ath: Regpair used: 0x65
[    8.205761] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.206219] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[    8.374719] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
[    8.374786] nvidia 0000:00:12.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    8.390039] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:00:12.0 on minor 0
[    8.390060] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.135  Tue Jan 17 15:26:26 PST 2017

[    8.756084] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[    8.756090] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.756092] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    8.756094] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.756096] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    8.756098] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.756101] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    8.756103] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    8.756105] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    9.157056] Adding 2048252k swap on /dev/sda7.  Priority:-1 extents:1 across:2048252k SSFS
[    9.321788] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    9.906620] audit: type=1400 audit(1529745324.195:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=640 comm="apparmor_parser"
[    9.906628] audit: type=1400 audit(1529745324.195:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=640 comm="apparmor_parser"
[    9.941624] audit: type=1400 audit(1529745324.230:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=642 comm="apparmor_parser"
[    9.941631] audit: type=1400 audit(1529745324.230:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
[    9.941634] audit: type=1400 audit(1529745324.230:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=642 comm="apparmor_parser"
[    9.941638] audit: type=1400 audit(1529745324.230:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser"
[    9.950070] acer_wmi: Acer Laptop ACPI-WMI Extras
[    9.964973] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[    9.965065] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[    9.965147] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[   10.005557] acer_wmi: Function bitmap for Communication Device: 0x1
[   10.043220] audit: type=1400 audit(1529745324.332:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=644 comm="apparmor_parser"
[   10.043226] audit: type=1400 audit(1529745324.332:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=644 comm="apparmor_parser"
[   10.043231] audit: type=1400 audit(1529745324.332:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=644 comm="apparmor_parser"
[   10.043234] audit: type=1400 audit(1529745324.332:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=644 comm="apparmor_parser"
[   10.567527] ath5k 0000:05:00.0 wlp5s0: renamed from wlan0
[   11.744621] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   11.745327] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[   11.745560] forcedeth 0000:00:0a.0 enp0s10: no link during initialization
[   11.747374] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   11.747640] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   11.747745] NFSD: starting 90-second grace period (net ffffffffb47edc80)
[   11.765812] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   11.780771] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   11.902535] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   21.265381] wlp5s0: authenticate with 16:b0:28:85:60:f0
[   21.276698] wlp5s0: send auth to 16:b0:28:85:60:f0 (try 1/3)
[   21.278302] wlp5s0: authenticated
[   21.281722] ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use
[   21.284196] wlp5s0: associate with 16:b0:28:85:60:f0 (try 1/3)
[   21.288070] wlp5s0: RX AssocResp from 16:b0:28:85:60:f0 (capab=0x411 status=0 aid=3)
[   21.288172] wlp5s0: associated
[   21.288997] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   27.144225] FS-Cache: Loaded
[   27.193253] FS-Cache: Netfs 'nfs' registered for caching
[   48.052419] random: crng init done

Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#30 Le 23/06/2018, à 20:34

??

Re : [Résolu] Interprétation d'un test disque dur

Je pense que tout est bien résumé dans cette trace

[   11.744621] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   11.745327] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[   11.745560] forcedeth 0000:00:0a.0 enp0s10: no link during initialization
[   11.747374] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   11.747640] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   11.747745] NFSD: starting 90-second grace period (net ffffffffb47edc80)
[   11.765812] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   11.780771] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   11.902535] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   21.265381] wlp5s0: authenticate with 16:b0:28:85:60:f0
[   21.276698] wlp5s0: send auth to 16:b0:28:85:60:f0 (try 1/3)
[   21.278302] wlp5s0: authenticated
[   21.281722] ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use
[   21.284196] wlp5s0: associate with 16:b0:28:85:60:f0 (try 1/3)
[   21.288070] wlp5s0: RX AssocResp from 16:b0:28:85:60:f0 (capab=0x411 status=0 aid=3)
[   21.288172] wlp5s0: associated
[   21.288997] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   27.144225] FS-Cache: Loaded
[   27.193253] FS-Cache: Netfs 'nfs' 

Le SSD n'améliore pas le réseau

Dernière modification par ?? (Le 23/06/2018, à 20:35)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#31 Le 24/06/2018, à 05:55

moko138

Re : [Résolu] Interprétation d'un test disque dur

Crestey a écrit :
[   40.223028] ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use

et

[   21.281722] ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use

Il me semble que toutafai dirait de passer la box en chiffrement WPA2 seul.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#32 Le 24/06/2018, à 06:02

xubu1957

Re : [Résolu] Interprétation d'un test disque dur

Bonjour,

moko138 a écrit :

Il me semble que toutafai dirait de passer la box en chiffrement WPA2 seul.

Comme indiqué au § 1 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#33 Le 24/06/2018, à 10:34

moko138

Re : [Résolu] Interprétation d'un test disque dur

Merci xubu1957 !  smile


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#34 Le 24/06/2018, à 11:23

Crestey

Re : [Résolu] Interprétation d'un test disque dur

Bonjour et merci pour vos réponses.
Pour le moment ma freebox est comme ça wpa_imagesia-com_1gp8t_small.png donc WPA (TSKIP).
Si je me rapporte au fil de xubu1957, ayant une freebox, je dois la mettre en WPA2 PSK/AES, mais si on regarde ce que me propose la freebox, ce mode n'est pas présent.
D'autre part il y a une petite contradiction car le mode actuel (WPA (TSKIP)), est celui recommandé par le tuto de toutafai :

tuto de toutafai a écrit :

Connecte toi sur l'interface d'administration de ta box et change moi cela pour
  soit que du wpa1 TKIP,

Pouvez-vous m'éclairer SVP ?


Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#35 Le 24/06/2018, à 11:59

HP

Re : [Résolu] Interprétation d'un test disque dur

moko138 a écrit :

Ce WD 500 Go est déjà à 44°C, alors que les chaleurs n'ont pas commencé.

Pour ce type de disque je trouve ça "normal", j'ai un WDC WD5000AADS-0 ; donc un Green, et il tourne présentement à 43°C.

Mes disques mécaniques ont des températures de 36°C, 37°C et 43°C.
Pour moi, il n'y a pas vraiment de quoi s'alerter.


cat /dev/urandom >/dev/null 2>&1 #github

Hors ligne

#36 Le 24/06/2018, à 12:38

xubu1957

Re : [Résolu] Interprétation d'un test disque dur

Dans cette réponse :

le 28/01/2012, toutafai a écrit :

Bonjour,

apparemment ta freebox chiffre ton wifi en WPA1 AES...., essaye de te mettre soit en WPA1 TKIP, ou mieux en WPA2 AES (n'oublie pas d'enregistrer les changement et de rebooter la freebox) puis re test ton wifi

> [Résolu] Problème wifi Ubuntu 11.10 avec Freebox Revolution.

_ _ _,

extrait #2, le 01/07/2017, xubu a écrit :

Modifier, le chiffrement de la Box , comme le conseille toutafai dans de nombreuses discussions :

Le 14/11/2016, moko138 a écrit :

Entretemps, j'ai retrouvé ce message ./viewtopic.php?pid=21563767#p21563767 de toutafai (8/2016) :

Ta box utilise un double chiffrement (à la fois du wpa1 et du wpa2), c'est certainement la source de ton problème.
Connecte toi sur l'interface d'administration de ta box et change moi cela pour
  soit que du wpa1 TKIP,
  soit que du wpa2 AES
(ne pas oublier d'enregistrer les changements sur ta box),
Une fois que ce sera fait, tu ne devrais plus avoir de déconnexions

Le 05/07/2017, #7, toutafai a écrit :
xubu1957 a écrit :

Entretemps, j'ai retrouvé ce message ./viewtopic.php?pid=21563767#p21563767 de toutafai (8/2016) :

+1 Et je le dit toujours :-) même si j'ai beaucoup moins de temps a consacrer au forum :-(

> [Résolu] wifi instable.

Dernière modification par xubu1957 (Le 24/06/2018, à 13:02)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#37 Le 24/06/2018, à 15:11

Crestey

Re : [Résolu] Interprétation d'un test disque dur

Excusez-moi, j'ai du mal à suivre roll .
Si je reviens à l'origine du problème, je comprends de #31 qu'il y a quelque chose à changer dans le paramétrage de la wifi de ma freebox, car c'est ce paramétrage qui ralentirait le démarrage de mon PC équipé d'un ssd.
Si on oublie les références aux autres discussions citées, et qu'on se concentre sur ma freebox : wpa_imagesia-com_1gp8t_small.png, pouvez-vous me dire si je dois effectivement changer le WPA1 TKIP actuel pour un des autres modes que me propose ma freebox (voir l'image) qui ne comprends ni wpa2 AES ni WPA2 PSK/AES, ou bien si WPA1 TKIP est le meilleur choix possible ?

Et si au final, le choix de WPA1 TKIP est le meilleur possible, est-ce à dire que #31 n'est pas fondé, et que le problème du démarrage lent est ailleurs ?


Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#38 Le 24/06/2018, à 15:21

moko138

Re : [Résolu] Interprétation d'un test disque dur

passer la box en chiffrement WPA2 seul.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#39 Le 24/06/2018, à 15:23

xubu1957

Re : [Résolu] Interprétation d'un test disque dur

Vu :

 ath5k 0000:05:00.0 wlp5s0: disabling HT/VHT due to WEP/TKIP use

ath5k
et :

ancienne Doc cartes Wi-Fi a écrit :

Les cartes Wi-Fi Atheros fonctionnent plus ou moins facilement sous GNU/Linux Ubuntu au gré des versions. Un pilote unique est utilisé pour tous les modèles, le module ath5k ou ath9k. Parfois, ce pilote ne fonctionne que partiellement et des réglages/optimisations sont nécessaires selon les modèles de cartes.

Fournis :

lspci -k -nn | grep -A 3 -i net
iwconfig

et :

nmcli dev wifi

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#40 Le 24/06/2018, à 15:34

uboops

Re : [Résolu] Interprétation d'un test disque dur

... En guise de Lapalissade, s'il y a autant d'avis et d'interprétations possibles via le résultat d'un simple smartctl ... c'est que l'utilitaire smartctl n'est pas abouti ... Il lui manque le bilan général à la fin en guise de synthèse et diagnostique basé sur une base de connaissance sérieuse.
J'espère que pour la médecine, les diagnostiques sont pas aussi dispersés ;-)

Dernière modification par uboops (Le 24/06/2018, à 15:35)


“Au lieu de faire que ce qui fût juste fût fort, on a fait que ce qui fût fort fût juste.” (Blaise Pascal).

Hors ligne

#41 Le 24/06/2018, à 15:41

??

Re : [Résolu] Interprétation d'un test disque dur

Pour la médecine, c'est pire.

Smartctl te fournit l'état de santé de quelques points vitaux que les fabriquants aiment faire suivre

Ton médecin hésitera à te prescrire une telle  quantité de scanners et a les renouveler réguliérement


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#42 Le 24/06/2018, à 16:06

uboops

Re : [Résolu] Interprétation d'un test disque dur

... Et ils auraient raison, la récursivité de ces tests nuisent à la santé (du patient ou du hdd) ;-)


“Au lieu de faire que ce qui fût juste fût fort, on a fait que ce qui fût fort fût juste.” (Blaise Pascal).

Hors ligne

#43 Le 24/06/2018, à 17:25

Crestey

Re : [Résolu] Interprétation d'un test disque dur

@xubu1957 (#39):

crestey2@pc12:~$ lspci -k -nn | grep -A 3 -i net
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP67 Ethernet [10de:054c] (rev a2)
	Subsystem: Acer Incorporated [ALI] MCP67 Ethernet [1025:0126]
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
--
05:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
	Subsystem: AMBIT Microsystem Corp. AR5BXB63 802.11bg NIC [1468:0428]
	Kernel driver in use: ath5k
	Kernel modules: ath5k
crestey2@pc12:~$
crestey2@pc12:~$ iwconfig
wlp5s0    IEEE 802.11  ESSID:"CRESTEY"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 16:B0:28:85:60:F0   
          Bit Rate=48 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=33/70  Signal level=-77 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:87   Missed beacon:0

enp0s10   no wireless extensions.

lo        no wireless extensions.

crestey2@pc12:~$ 
crestey2@pc12:~$ nmcli dev wifi
*  SSID           MODE   CHAN  DÉBIT    SIGNAL  BARS  SÉCURITÉ 
*  CRESTEY        Infra  1     54 Mo/s  42      ▂▄__  WPA1     
   freebox_CYRUS  Infra  1     54 Mo/s  10      ▂___  WPA1     
   --             Infra  1     54 Mo/s  7       ▂___  WPA2     
crestey2@pc12:~$ 

Merci à tous.
Sous Ubuntu/XFCE depuis 2013. Ça fonctionne vraiment très bien.

Hors ligne

#44 Le 24/06/2018, à 17:36

xubu1957

Re : [Résolu] Interprétation d'un test disque dur

En cherchant avec :

AR5BXB63 802.11bg NIC [1468:0428]

J'ai cette discussion sans réponse > Carte réseau qui fout la m... ? mais si ?? voit une piste.

et dans [RÉSOLU] hp g60 problème wifi AR542x Wireless Network :

Le 31/03/2016, xubu a écrit :

Au # 4 dans ce fil : forum.ubuntu-fr.org/viewtopic.php?id=1714941

toutafai a écrit :

ok, essaye cette commande

echo "options ath5k nohwcrypt=1" | sudo tee -a /etc/modprobe.d/ath5k.conf

débranche ton câble ethernet, reboot et test ton wifi

(...)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne