Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.04 LTS
Ubuntu-fr propose des clés USB de Ubuntu et toutes ses « saveurs » ainsi qu'un magnifique t-shirt pour cette toute nouvelle version d'Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 03/06/2018, à 12:49

Alaingenieux

Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Bonjour,
Tout d'abord ma config : Carte mère ASUS P5K-E /  Processeur IntelCore 2 DUO E 8400 3Ghz 6Mo / HDD 500 Go / Je tourne sous VOYAGER 14.04
J'ai fouillé dans le forum mais les posts sur ce sujet concernent surtout la 16.04
Depuis quelques semaines mon ordi traîne les pieds au démarrage.
Tout d'abord, le BIOS me semble plus lent. Avant, on avait juste le temps de cliquer sur Echapp ou PF8 pour y entrer, maintenant le logo de la carte mère reste affiché pendant 40 sec. C'est long !!!
VOYAGER met 1'20" pour se charger; pendant tout ce temps le HDD est en fonction (LED allumée) mais on ne l'entend pas gratter. Finalement, après une courte série d'accès, le système se lance et demande le mot de passe. Après, tout rentre dans l'ordre.
Voilà !! Je ne vois pas trop où chercher. Ce qui me tracasse c'est le BIOS. Je ne l'avais jamais chronométré mais je suis sûr qu'il démarrait plus vite avant.
Toute suggestion bienvenue !!!      Merci d'avance .

Dernière modification par Alaingenieux (Le 14/06/2018, à 18:14)

Hors ligne

#2 Le 03/06/2018, à 19:42

LukePerp

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Bonjour,
Peux tu redémarrer ta machine, puis immédiatement dès que tu pourras, ouvres le terminal et donnes nous le retour de :

dmesg

Ensuite, donnes nous aussi :

sudo systemd-analyze
sudo systemd-analyze blame
sudo systemd-analyze critical-chain

Aussi, communique nous le rapport d'un boot info


Desktop : Ubuntu Mate 18.04 - Intel i5 - 8 Go - Dual boot Windows 7 pour jouer
Laptop ASUS : Ubuntu Mate 16.04 - Intel i3 - 4 Go
Vieux laptop de 1993 : Bodhi Linux - Pentium M - 432 Mo

Hors ligne

#3 Le 03/06/2018, à 22:39

Alaingenieux

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Voici les retours demandés :

  [    0.000000] Memory: 2033728K/2096248K available (6628K kernel code, 647K rwdata, 2788K rodata, 888K init, 924K bss, 62520K reserved, 1183240K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19d6000 - 0xc1ab4000   ( 888 kB)
[    0.000000]       .data : 0xc167945c - 0xc19d5f80   (3442 kB)
[    0.000000]       .text : 0xc1000000 - 0xc167945c   (6629 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3000.251 MHz processor
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.50 BogoMIPS (lpj=12001004)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.004029] Security Framework initialized
[    0.004048] AppArmor: AppArmor initialized
[    0.004049] Yama: becoming mindful.
[    0.004091] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004093] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004291] Initializing cgroup subsys memory
[    0.004298] Initializing cgroup subsys devices
[    0.004300] Initializing cgroup subsys freezer
[    0.004302] Initializing cgroup subsys blkio
[    0.004304] Initializing cgroup subsys perf_event
[    0.004307] Initializing cgroup subsys hugetlb
[    0.004331] CPU: Physical Processor ID: 0
[    0.004332] CPU: Processor Core ID: 0
[    0.004333] FEATURE SPEC_CTRL Not Present
[    0.004336] mce: CPU supports 6 MCE banks
[    0.004343] CPU0: Thermal monitoring enabled (TM2)
[    0.004346] process: using mwait in idle threads
[    0.004354] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.004354] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.004358] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.004359] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.004360] Speculative Store Bypass: Vulnerable
[    0.004651] Freeing SMP alternatives memory: 32K (c1ab4000 - c1abc000)
[    0.008246] ACPI: Core revision 20131115
[    0.011144] ACPI: All ACPI Tables successfully acquired
[    0.012005] ftrace: allocating 27993 entries in 55 pages
[    0.028056] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069764] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (fam: 06, model: 17, stepping: 06)
[    0.072000] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
[    0.072000] APIC delta adjusted to PM-Timer: 2083293 (3249896)
[    0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] CPU 1 irqstacks, hard=f4100000 soft=f4102000
[    0.072000] x86: Booting SMP configuration:
[    0.008000] CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[    0.008000] Initializing CPU#1
[    0.072000] .... node  #0, CPUs:      #1
[    0.086358] x86: Booted up 1 node, 2 CPUs
[    0.086363] smpboot: Total of 2 processors activated (12001.00 BogoMIPS)
[    0.086453] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088141] devtmpfs: initialized
[    0.088195] EVM: security.selinux
[    0.088197] EVM: security.SMACK64
[    0.088198] EVM: security.ima
[    0.088199] EVM: security.capability
[    0.088280] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes)
[    0.088346] pinctrl core: initialized pinctrl subsystem
[    0.088346] regulator-dummy: no parameters
[    0.088346] RTC time: 22:15:37, date: 06/03/18
[    0.088346] NET: Registered protocol family 16
[    0.088466] EISA bus registered
[    0.088468] cpuidle: using governor ladder
[    0.088469] cpuidle: using governor menu
[    0.088537] ACPI: bus type PCI registered
[    0.088539] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.088598] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.088600] PCI: not using MMCONFIG
[    0.088688] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.088737] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.088739] PCI: Using configuration type 1 for base access
[    0.088847] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.088848] mtrr: probably your BIOS does not setup all CPUs.
[    0.088850] mtrr: corrected configuration.
[    0.092060] bio: create slab <bio-0> at 0
[    0.092087] ACPI: Added _OSI(Module Device)
[    0.092089] ACPI: Added _OSI(Processor Device)
[    0.092090] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.092092] ACPI: Added _OSI(Processor Aggregator Device)
[    0.094023] ACPI: Executed 1 blocks of module-level executable AML code
[    0.096204] ACPI: SSDT 7ff8e0d0 0001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.096439] ACPI: Dynamic OEM Table Load:
[    0.096441] ACPI: SSDT   (null) 0001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.096604] ACPI: SSDT 7ff8e2b0 000143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.096837] ACPI: Dynamic OEM Table Load:
[    0.096840] ACPI: SSDT   (null) 000143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.096977] ACPI: Interpreter enabled
[    0.096993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.097004] ACPI: (supports S0 S1 S3 S4 S5)
[    0.097006] ACPI: Using IOAPIC for interrupt routing
[    0.097024] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.097452] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.097454] PCI: Using MMCONFIG for extended config space
[    0.097466] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.097571] ACPI: No dock devices found.
[    0.104863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.104868] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.104873] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.104960] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.104963] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.104965] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.104967] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.104969] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[    0.104971] PCI: root bus 00: using default resources
[    0.105127] PCI host bridge to bus 0000:00
[    0.105130] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.105133] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.105135] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.105143] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.105229] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.105261] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.105302] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.105351] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.105387] pci 0000:00:1a.0: reg 0x20: [io  0xa800-0xa81f]
[    0.105468] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.105501] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.105537] pci 0000:00:1a.1: reg 0x20: [io  0xa880-0xa89f]
[    0.105617] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.105649] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.105686] pci 0000:00:1a.2: reg 0x20: [io  0xac00-0xac1f]
[    0.105765] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.105804] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.105822] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
[    0.105900] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.105945] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.105980] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.105994] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[    0.106050] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.106120] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.106178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.106223] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.106256] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.106313] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.106358] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.106390] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.106449] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.106495] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.106528] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.106565] pci 0000:00:1d.0: reg 0x20: [io  0xa080-0xa09f]
[    0.106644] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.106675] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.106711] pci 0000:00:1d.1: reg 0x20: [io  0xa400-0xa41f]
[    0.106790] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.106823] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.106859] pci 0000:00:1d.2: reg 0x20: [io  0xa480-0xa49f]
[    0.106939] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.106980] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.106999] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
[    0.107076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.107121] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.107151] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.107227] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.107261] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[    0.107330] pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[    0.107335] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.107339] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.107432] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[    0.107445] pci 0000:00:1f.2: reg 0x10: [io  0x9000-0x9007]
[    0.107452] pci 0000:00:1f.2: reg 0x14: [io  0x8c00-0x8c03]
[    0.107459] pci 0000:00:1f.2: reg 0x18: [io  0x8880-0x8887]
[    0.107466] pci 0000:00:1f.2: reg 0x1c: [io  0x8800-0x8803]
[    0.107473] pci 0000:00:1f.2: reg 0x20: [io  0x8480-0x848f]
[    0.107479] pci 0000:00:1f.2: reg 0x24: [io  0x8400-0x840f]
[    0.107565] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.107579] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[    0.107596] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.107674] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.107687] pci 0000:00:1f.5: reg 0x10: [io  0xa000-0xa007]
[    0.107694] pci 0000:00:1f.5: reg 0x14: [io  0x9c00-0x9c03]
[    0.107701] pci 0000:00:1f.5: reg 0x18: [io  0x9880-0x9887]
[    0.107708] pci 0000:00:1f.5: reg 0x1c: [io  0x9800-0x9803]
[    0.107715] pci 0000:00:1f.5: reg 0x20: [io  0x9480-0x948f]
[    0.107721] pci 0000:00:1f.5: reg 0x24: [io  0x9400-0x940f]
[    0.107843] pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
[    0.107852] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.107862] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107871] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.107878] pci 0000:01:00.0: reg 0x24: [io  0xbc00-0xbc7f]
[    0.107885] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref]
[    0.107949] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107952] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.107955] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.107958] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.108008] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.108016] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.108095] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.108176] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[    0.108188] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.108236] pci 0000:03:00.0: PME# supported from D3hot
[    0.108291] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.108311] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.108320] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.108330] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.108340] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.108349] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.108445] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.108454] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.108457] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.108461] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.108526] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[    0.108547] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.108558] pci 0000:02:00.0: reg 0x18: [io  0xc800-0xc8ff]
[    0.108597] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.108657] pci 0000:02:00.0: supports D1 D2
[    0.108659] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116017] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.116022] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.116027] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.116081] pci 0000:05:01.0: [14f1:2f00] type 00 class 0x078000
[    0.116098] pci 0000:05:01.0: reg 0x10: [mem 0xfebf0000-0xfebfffff]
[    0.116114] pci 0000:05:01.0: reg 0x14: [io  0xec00-0xec07]
[    0.116170] pci 0000:05:01.0: supports D1 D2
[    0.116172] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116213] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010
[    0.116228] pci 0000:05:03.0: reg 0x10: [mem 0xfebef000-0xfebeffff]
[    0.116292] pci 0000:05:03.0: supports D1 D2
[    0.116294] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.116354] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.116358] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.116361] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.116366] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.116369] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.116391] pci_bus 0000:00: on NUMA node 0
[    0.117130] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.117181] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.117232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.117282] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.117332] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.117383] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.117434] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.117484] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.117574] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.117580] ACPI: \_SB_.PCI0: notify handler is installed
[    0.117614] Found 1 acpi root devices
[    0.120014] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.120016] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.120019] vgaarb: loaded
[    0.120020] vgaarb: bridge control possible 0000:01:00.0
[    0.120193] SCSI subsystem initialized
[    0.120205] libata version 3.00 loaded.
[    0.120205] ACPI: bus type USB registered
[    0.120205] usbcore: registered new interface driver usbfs
[    0.120205] usbcore: registered new interface driver hub
[    0.120205] usbcore: registered new device driver usb
[    0.120205] PCI: Using ACPI for IRQ routing
[    0.120205] PCI: pci_cache_line_size set to 64 bytes
[    0.120205] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.120205] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff]
[    0.120205] NetLabel: Initializing
[    0.120205] NetLabel:  domain hash size = 128
[    0.120205] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.120205] NetLabel:  unlabeled traffic allowed by default
[    0.120205] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.120205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.120205] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.122091] Switched to clocksource hpet
[    0.126492] AppArmor: AppArmor Filesystem Enabled
[    0.126507] pnp: PnP ACPI init
[    0.126518] ACPI: bus type PNP registered
[    0.126568] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.126571] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.126604] pnp 00:01: [dma 4]
[    0.126622] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.126654] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.126677] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.126703] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.126919] pnp 00:05: [dma 2]
[    0.126964] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.127015] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.127018] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127158] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.127161] system 00:07: [io  0x0800-0x087f] could not be reserved
[    0.127163] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.127166] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.127168] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.127171] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.127174] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[    0.127176] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.127179] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[    0.127181] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.127184] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127255] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.127434] pnp 00:09: [dma 0 disabled]
[    0.127490] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.127554] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127557] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.127560] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.127608] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.127661] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.127664] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128085] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.128089] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.128091] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.128094] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.128096] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.128205] pnp: PnP ACPI: found 14 devices
[    0.128206] ACPI: bus type PNP unregistered
[    0.128209] PnPBIOS: Disabled by ACPI PNP
[    0.164348] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.164352] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[    0.164360] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.164367] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.164376] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    0.164379] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.164382] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.164384] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.164387] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.164391] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[    0.164394] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.164396] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.164399] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.164402] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.164405] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.164408] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.164411] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164414] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.164417] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.164421] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
[    0.164425] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.164430] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.164432] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.164437] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.164440] pci 0000:00:1c.4:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.164445] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.164448] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.164452] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.164455] pci 0000:00:1c.5:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.164461] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.164463] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.164468] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.164474] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.164477] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.164479] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.164481] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[    0.164483] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164485] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.164487] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[    0.164489] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.164492] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.164494] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.164496] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.164498] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.164500] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.164502] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.164504] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.164506] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.164508] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.164510] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[    0.164537] NET: Registered protocol family 2
[    0.164704] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.164717] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.164735] TCP: Hash tables configured (established 8192 bind 8192)
[    0.164753] TCP: reno registered
[    0.164755] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.164761] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.164806] NET: Registered protocol family 1
[    0.165717] pci 0000:01:00.0: Video device with shadowed ROM
[    0.165729] PCI: CLS 32 bytes, default 64
[    0.165767] Trying to unpack rootfs image as initramfs...
[    0.632754] Freeing initrd memory: 28900K (f477e000 - f63b7000)
[    0.632962] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[    0.632969] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[    0.633033] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.633035] Scanning for low memory corruption every 60 seconds
[    0.633274] Initialise system trusted keyring
[    0.633318] audit: initializing netlink socket (disabled)
[    0.633331] type=2000 audit(1528064137.632:1): initialized
[    0.651466] bounce pool size: 64 pages
[    0.651477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.652650] zbud: loaded
[    0.652714] VFS: Disk quotas dquot_6.5.2
[    0.652757] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.653168] fuse init (API version 7.22)
[    0.653239] msgmni has been set to 1717
[    0.653298] Key type big_key registered
[    0.653614] Key type asymmetric registered
[    0.653616] Asymmetric key parser 'x509' registered
[    0.653645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.653674] io scheduler noop registered
[    0.653676] io scheduler deadline registered (default)
[    0.653702] io scheduler cfq registered
[    0.653904] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.653942] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.654009] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.654119] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.654226] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.654292] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.654306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.654347] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    0.654348] vesafb: scrolling: redraw
[    0.654350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.657039] vesafb: framebuffer at 0xfb000000, mapped to 0xf8480000, using 4032k, total 4032k
[    0.660481] Console: switching to colour frame buffer device 160x50
[    0.663800] fb0: VESA VGA frame buffer device
[    0.663823] intel_idle: does not run on family 6 model 23
[    0.663830] ipmi message handler version 39.2
[    0.663911] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.663915] ACPI: Power Button [PWRB]
[    0.663954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.663957] ACPI: Power Button [PWRF]
[    0.664082] GHES: HEST is not enabled!
[    0.664127] isapnp: Scanning for PnP cards...
[    0.672043] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.692427] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.693508] Linux agpgart interface v0.103
[    0.694797] brd: module loaded
[    0.695407] loop: module loaded
[    0.695509] ata_piix 0000:00:1f.2: version 2.13
[    0.695587] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.696507] scsi0 : ata_piix
[    0.696557] scsi1 : ata_piix
[    0.696590] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
[    0.696594] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
[    0.696661] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.697380] scsi2 : ata_piix
[    0.697421] scsi3 : ata_piix
[    0.697451] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.697454] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.697722] libphy: Fixed MDIO Bus: probed
[    0.697813] tun: Universal TUN/TAP device driver, 1.6
[    0.697814] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.697845] PPP generic driver version 2.4.2
[    0.697876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.697880] ehci-pci: EHCI PCI platform driver
[    0.697962] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.697968] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.697979] ehci-pci 0000:00:1a.7: debug port 1
[    0.701886] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.701901] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.712012] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.712055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.712058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.712060] usb usb1: Product: EHCI Host Controller
[    0.712062] usb usb1: Manufacturer: Linux 3.13.0-149-generic ehci_hcd
[    0.712064] usb usb1: SerialNumber: 0000:00:1a.7
[    0.712144] hub 1-0:1.0: USB hub found
[    0.712153] hub 1-0:1.0: 6 ports detected
[    0.712347] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.712352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.712362] ehci-pci 0000:00:1d.7: debug port 1
[    0.716260] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.716275] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.728011] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.728054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.728056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728058] usb usb2: Product: EHCI Host Controller
[    0.728060] usb usb2: Manufacturer: Linux 3.13.0-149-generic ehci_hcd
[    0.728062] usb usb2: SerialNumber: 0000:00:1d.7
[    0.728133] hub 2-0:1.0: USB hub found
[    0.728139] hub 2-0:1.0: 6 ports detected
[    0.728258] ehci-platform: EHCI generic platform driver
[    0.728265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.728267] ohci-pci: OHCI PCI platform driver
[    0.728277] ohci-platform: OHCI generic platform driver
[    0.728282] uhci_hcd: USB Universal Host Controller Interface driver
[    0.728351] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.728355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.728384] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    0.728420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.728423] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728425] usb usb3: Product: UHCI Host Controller
[    0.728427] usb usb3: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.728429] usb usb3: SerialNumber: 0000:00:1a.0
[    0.728499] hub 3-0:1.0: USB hub found
[    0.728505] hub 3-0:1.0: 2 ports detected
[    0.728630] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.728634] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.728661] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    0.728696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.728698] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728700] usb usb4: Product: UHCI Host Controller
[    0.728702] usb usb4: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.728704] usb usb4: SerialNumber: 0000:00:1a.1
[    0.728773] hub 4-0:1.0: USB hub found
[    0.728779] hub 4-0:1.0: 2 ports detected
[    0.728902] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.728907] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.728927] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    0.728961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.728964] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728966] usb usb5: Product: UHCI Host Controller
[    0.728968] usb usb5: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.728970] usb usb5: SerialNumber: 0000:00:1a.2
[    0.729040] hub 5-0:1.0: USB hub found
[    0.729045] hub 5-0:1.0: 2 ports detected
[    0.729170] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.729175] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.729194] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    0.729228] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.729231] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.729233] usb usb6: Product: UHCI Host Controller
[    0.729235] usb usb6: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.729237] usb usb6: SerialNumber: 0000:00:1d.0
[    0.729306] hub 6-0:1.0: USB hub found
[    0.729312] hub 6-0:1.0: 2 ports detected
[    0.729437] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.729442] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.729469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    0.729505] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.729507] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.729509] usb usb7: Product: UHCI Host Controller
[    0.729511] usb usb7: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.729513] usb usb7: SerialNumber: 0000:00:1d.1
[    0.729583] hub 7-0:1.0: USB hub found
[    0.729588] hub 7-0:1.0: 2 ports detected
[    0.729711] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.729716] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.729735] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    0.729769] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.729772] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.729774] usb usb8: Product: UHCI Host Controller
[    0.729776] usb usb8: Manufacturer: Linux 3.13.0-149-generic uhci_hcd
[    0.729778] usb usb8: SerialNumber: 0000:00:1d.2
[    0.729850] hub 8-0:1.0: USB hub found
[    0.729856] hub 8-0:1.0: 2 ports detected
[    0.729984] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.729986] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.730497] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.730564] mousedev: PS/2 mouse device common for all mice
[    0.730659] rtc_cmos 00:02: RTC can wake from S4
[    0.730750] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.730771] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.730833] device-mapper: uevent: version 1.0.3
[    0.730884] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.730901] platform eisa.0: Probing EISA bus 0
[    0.730906] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.730923] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.730925] platform eisa.0: EISA: Detected 0 cards
[    0.730931] cpufreq-nforce2: No nForce2 chipset.
[    0.730934] ledtrig-cpu: registered to indicate activity on CPUs
[    0.731055] TCP: cubic registered
[    0.731139] NET: Registered protocol family 10
[    0.731311] NET: Registered protocol family 17
[    0.731319] Key type dns_resolver registered
[    0.731449] Using IPI No-Shortcut mode
[    0.731513] Loading compiled-in X.509 certificates
[    0.734345] Loaded X.509 cert 'Magrathea: Glacier signing key: 8d6b2e107c27dd40580b07cf47d8f598de7e5b48'
[    0.734356] registered taskstats version 1
[    0.736167] Key type trusted registered
[    0.739151] Key type encrypted registered
[    0.739154] AppArmor: AppArmor sha1 policy hashing enabled
[    0.739157] IMA: No TPM chip found, activating TPM-bypass!
[    0.739430] regulator-dummy: disabling
[    0.739465]   Magic number: 6:279:299
[    0.739522] rtc_cmos 00:02: setting system clock to 2018-06-03 22:15:38 UTC (1528064138)
[    0.739746] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.739748] EDD information not available.
[    0.739772] PM: Hibernation image not present or could not be loaded.
[    0.754364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.973524] isapnp: No Plug & Play device found
[    1.030540] ata3: SATA link down (SStatus 0 SControl 300)
[    1.041070] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.041074] ata4: SATA link down (SStatus 0 SControl 300)
[    1.178447] usb 1-3: New USB device found, idVendor=0bda, idProduct=8187
[    1.178451] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.178454] usb 1-3: Product: RTL8187_Wireless
[    1.178457] usb 1-3: Manufacturer: Manufacturer_Realtek_RTL8187_
[    1.178460] usb 1-3: SerialNumber: 0015AF651029
[    1.288013] usb 2-3: new high-speed USB device number 2 using ehci-pci
[    1.428071] usb 2-3: New USB device found, idVendor=04b8, idProduct=0885
[    1.428075] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.428078] usb 2-3: Product: EPSON Epson Stylus SX235 Series
[    1.428081] usb 2-3: Manufacturer: EPSON
[    1.428083] usb 2-3: SerialNumber: 4E3841593035363040
[    1.508061] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.508074] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.524623] ata1.00: ATA-8: WDC WD3200AAKX-00ERMA0, 15.01H15, max UDMA/133
[    1.524627] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.524828] ata1.01: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[    1.524832] ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.540632] ata1.00: configured for UDMA/133
[    1.556300] ata1.01: configured for UDMA/133
[    1.556423] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKX-0 15.0 PQ: 0 ANSI: 5
[    1.556509] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.556523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.556553] sd 0:0:0:0: [sda] Write Protect is off
[    1.556555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.556575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.556616] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[    1.556738] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.556770] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.568060] sd 0:0:1:0: [sdb] Write Protect is off
[    1.568069] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.582077] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.600011] usb 2-6: new high-speed USB device number 4 using ehci-pci
[    1.605309]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.613781]  sdb: sdb1
[    1.613878] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.613977] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.632016] tsc: Refined TSC clocksource calibration: 2999.944 MHz
[    1.760442] usb 2-6: New USB device found, idVendor=06f8, idProduct=3005
[    1.760446] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.760449] usb 2-6: Product: Hercules Dualpix Exchange
[    1.760452] usb 2-6: Manufacturer: Guillemot Corporation
[    2.004014] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    2.180766] usb 8-1: New USB device found, idVendor=046d, idProduct=c03d
[    2.180770] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.180773] usb 8-1: Product: USB-PS/2 Optical Mouse
[    2.180776] usb 8-1: Manufacturer: Logitech
[    2.632053] Switched to clocksource tsc
[    6.548009] ata2.00: link is slow to respond, please be patient (ready=0)
[   10.748009] ata2.00: SRST failed (errno=-16)
[   16.584009] ata2.00: link is slow to respond, please be patient (ready=0)
[   20.784010] ata2.00: SRST failed (errno=-16)
[   26.620009] ata2.00: link is slow to respond, please be patient (ready=0)
[   55.796009] ata2.00: SRST failed (errno=-16)
[   55.796014] ata2.00: limiting SATA link speed to 1.5 Gbps
[   55.796017] ata2.01: limiting SATA link speed to 1.5 Gbps
[   60.848010] ata2.00: SRST failed (errno=-16)
[   60.858548] ata2.00: reset failed, giving up
[   60.858799] Freeing unused kernel memory: 888K (c19d6000 - c1ab4000)
[   60.858831] Write protecting the kernel text: 6632k
[   60.858899] Write protecting the kernel read-only data: 2792k
[   60.858900] NX-protecting the kernel data: 5656k
[   60.869906] systemd-udevd[110]: starting version 204
[   60.900854] [drm] Initialized drm 1.1.0 20060810
[   60.902882] Floppy drive(s): fd0 is 1.44M
[   60.916339] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[   60.922468] wmi: Mapper loaded
[   60.923042] sky2: driver version 1.30
[   60.923109] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[   60.923160] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
[   60.923191] scsi4 : pata_jmicron
[   60.923855] FDC 0 is a post-1991 82077
[   60.925393] sky2 0000:02:00.0 eth0: addr 00:1f:c6:01:1f:e3
[   60.936493] hidraw: raw HID events driver (C) Jiri Kosina
[   60.952527] scsi5 : pata_jmicron
[   60.952570] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[   60.952572] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[   60.952718] ahci 0000:03:00.0: version 3.0
[   60.967448] checking generic (fb000000 3f0000) vs hw (d0000000 10000000)
[   60.967451] checking generic (fb000000 3f0000) vs hw (fa000000 2000000)
[   60.967453] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   60.967468] Console: switching to colour dummy device 80x25
[   60.968152] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   60.968156] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[   60.971138] usbcore: registered new interface driver usbhid
[   60.971140] usbhid: USB HID core driver
[   60.971971] scsi6 : ahci
[   60.976072] scsi7 : ahci
[   60.976122] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[   60.976125] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[   60.979578] [drm] hdmi device  not found 1 0 1
[   60.979650] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x086100a2
[   60.979652] nouveau  [  DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[   60.979654] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[   60.980497] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   61.022612] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   61.022614] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   61.022697] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   61.022700] nouveau  [   VBIOS][0000:01:00.0] version 60.86.59.00.00
[   61.044130] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[   61.045151] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   61.045160] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   61.045261] nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
[   61.045263] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   61.045265] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 1292 tags
[   61.046081] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[   61.046878] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[   61.049043] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 1320000uv
[   61.071209] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[   61.071229] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   61.071242] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   61.071263] nouveau  [     CLK][0000:01:00.0] 20: core 459 MHz shader 918 MHz memory 333 MHz
[   61.071295] nouveau  [     CLK][0000:01:00.0] --: core 459 MHz shader 918 MHz memory 399 MHz
[   61.071391] [TTM] Zone  kernel: Available graphics memory: 440154 kiB
[   61.071393] [TTM] Zone highmem: Available graphics memory: 1031774 kiB
[   61.071394] [TTM] Initializing pool allocator
[   61.071398] [TTM] Initializing DMA pool allocator
[   61.071405] nouveau  [     DRM] VRAM: 1024 MiB
[   61.071407] nouveau  [     DRM] GART: 1048576 MiB
[   61.071411] nouveau  [     DRM] TMDS table version 2.0
[   61.071414] nouveau  [     DRM] DCB version 4.0
[   61.071416] nouveau  [     DRM] DCB outp 00: 02000300 00000028
[   61.071419] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[   61.071421] nouveau  [     DRM] DCB outp 02: 04011310 00000028
[   61.071423] nouveau  [     DRM] DCB outp 03: 010223f1 00c0c080
[   61.071425] nouveau  [     DRM] DCB conn 00: 1030
[   61.071427] nouveau  [     DRM] DCB conn 01: 0100
[   61.071429] nouveau  [     DRM] DCB conn 02: 0210
[   61.071430] nouveau  [     DRM] DCB conn 03: 0211
[   61.071432] nouveau  [     DRM] DCB conn 04: 0213
[   61.080114] nouveau W[     DRM] failed to create encoder 0/1/0: -19
[   61.080116] nouveau W[     DRM] TV-1 has no encoders, removing
[   61.080134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   61.080136] [drm] No driver support for vblank timestamp query.
[   61.089193] nouveau  [     DRM] MM: using CRYPT for buffer copies
[   61.116555] ata5.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-115  0122, E1.22, max UDMA/33
[   61.132526] ata5.01: configured for UDMA/33
[   61.133477] nouveau  [     DRM] allocated 1440x900 fb: 0x70000, bo f5e20000
[   61.133515] fbcon: nouveaufb (fb0) is primary device
[   61.134784] scsi 4:0:1:0: CD-ROM            PIONEER  DVD-ROM DVD-115  1.22 PQ: 0 ANSI: 5
[   61.136119] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[   61.136121] cdrom: Uniform CD-ROM driver Revision: 3.20
[   61.136332] sr 4:0:1:0: Attached scsi CD-ROM sr0
[   61.136412] sr 4:0:1:0: Attached scsi generic sg2 type 5
[   61.200207] Console: switching to colour frame buffer device 180x56
[   61.201039] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   61.201041] nouveau 0000:01:00.0: registered panic notifier
[   61.201046] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[   61.296028] ata8: SATA link down (SStatus 0 SControl 300)
[   61.328030] ata7: SATA link down (SStatus 0 SControl 300)
[   61.544112] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000110e926, S400
[   62.469770] random: nonblocking pool is initialized
[   62.672015] raid6: mmxx1     3830 MB/s
[   62.740005] raid6: mmxx2     4344 MB/s
[   62.808003] raid6: sse1x1    2634 MB/s
[   62.876009] raid6: sse1x2    3370 MB/s
[   62.944010] raid6: sse2x1    4809 MB/s
[   63.012013] raid6: sse2x2    5430 MB/s
[   63.012015] raid6: using algorithm sse2x2 (5430 MB/s)
[   63.012016] raid6: using ssse3x1 recovery algorithm
[   63.015520] xor: measuring software checksum speed
[   63.052002]    pIII_sse  : 10663.000 MB/sec
[   63.092002]    prefetch64-sse: 12051.000 MB/sec
[   63.092004] xor: using function: prefetch64-sse (12051.000 MB/sec)
[   63.120310] bio: create slab <bio-1> at 1
[   63.120668] Btrfs loaded
[   63.436682] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   73.133421] Adding 3052312k swap on /dev/sda7.  Priority:-1 extents:1 across:3052312k FS
[   73.958298] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[   74.148631] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   74.472436] systemd-udevd[452]: starting version 204
[   74.610475] lp: driver loaded but no devices found
[   74.619562] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   74.621623] ppdev: user-space parallel port driver
[   74.824015] device-mapper: multipath: version 1.6.0 loaded
[   74.844450] WARNING! power/level is deprecated; use power/control instead
[   74.887624] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   75.013348] type=1400 audit(1528057012.771:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[   75.013354] type=1400 audit(1528057012.771:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[   75.013358] type=1400 audit(1528057012.771:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   75.015972] type=1400 audit(1528057012.771:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=540 comm="apparmor_parser"
[   75.115843] Linux video capture interface: v2.00
[   75.133934] cfg80211: Calling CRDA to update world regulatory domain
[   75.188359] 4:3:1: cannot get freq at ep 0x84
[   75.196484] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[   75.196488] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1<6>[   75.196646] usbcore: registered new interface driver snd-usb-audio
[   75.199894] uvcvideo: Found UVC 1.00 device Hercules Dualpix Exchange (06f8:3005)
[   75.206229] input: Hercules Dualpix Exchange as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input4
[   75.206292] usbcore: registered new interface driver uvcvideo
[   75.206293] USB Video Class driver (1.1.1)
[   75.261245] autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[   75.261248]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   75.261250]    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   75.261251]    mono: mono_out=0x0
[   75.261252]    dig-out=0x1b/0x0
[   75.261253]    inputs:
[   75.261255]      Front Mic=0x14
[   75.261257]      Rear Mic=0x17
[   75.261258]      Line=0x15
[   75.261259]      CD=0x18
[   75.273769] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   75.275014] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   75.276246] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   75.276309] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   75.277526] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   75.278757] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   75.279969] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   75.280051] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   75.324464] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   75.324634] ieee80211 phy0: hwaddr 00:15:af:65:10:29, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   75.335617] rtl8187: Customer ID is 0x00
[   75.336104] rtl8187: wireless switch is on
[   75.336150] usbcore: registered new interface driver rtl8187
[   75.518209] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   75.745104] cfg80211: World regulatory domain updated:
[   75.745108] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   75.745110] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   75.745112] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   75.745113] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   75.745115] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   75.745117] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   76.387609] init: failsafe main process (746) killed by TERM signal
[   76.983774] Bluetooth: Core ver 2.17
[   76.983791] NET: Registered protocol family 31
[   76.983792] Bluetooth: HCI device and connection manager initialized
[   76.983799] Bluetooth: HCI socket layer initialized
[   76.983802] Bluetooth: L2CAP socket layer initialized
[   76.983806] Bluetooth: SCO socket layer initialized
[   76.998292] Bluetooth: RFCOMM TTY layer initialized
[   76.998301] Bluetooth: RFCOMM socket layer initialized
[   76.998306] Bluetooth: RFCOMM ver 1.11
[   77.003761] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   77.003763] Bluetooth: BNEP filters: protocol multicast
[   77.003768] Bluetooth: BNEP socket layer initialized
[   77.034383] type=1400 audit(1528057014.791:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=823 comm="apparmor_parser"
[   77.034390] type=1400 audit(1528057014.791:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=823 comm="apparmor_parser"
[   77.496910] usblp 2-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0885
[   77.497116] usbcore: registered new interface driver usblp
[   77.514278] init: cups main process (824) killed by HUP signal
[   77.514287] init: cups main process ended, respawning
[   77.519949] type=1400 audit(1528057015.275:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=895 comm="apparmor_parser"
[   77.519957] type=1400 audit(1528057015.275:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=895 comm="apparmor_parser"
[   77.519962] type=1400 audit(1528057015.275:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=895 comm="apparmor_parser"
[   77.520891] type=1400 audit(1528057015.279:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=894 comm="apparmor_parser"
[   78.971027] init: samba-ad-dc main process (963) terminated with status 1
[   80.284764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   80.290175] sky2 0000:02:00.0 eth0: enabling interface
[   80.290560] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   80.575732] init: plymouth-upstart-bridge main process ended, respawning
[   80.583453] init: plymouth-upstart-bridge main process (1280) terminated with status 1
[   80.583465] init: plymouth-upstart-bridge main process ended, respawning
[   82.084758] wlan0: authenticate with 30:7e:cb:4d:5a:bc
[   82.281677] wlan0: send auth to 30:7e:cb:4d:5a:bc (try 1/3)
[   82.283369] wlan0: authenticated
[   82.284363] wlan0: associate with 30:7e:cb:4d:5a:bc (try 1/3)
[   82.286990] wlan0: RX AssocResp from 30:7e:cb:4d:5a:bc (capab=0x411 status=0 aid=1)
[   82.287613] wlan0: associated
[   82.287641] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   82.566739] 4:3:1: cannot get freq at ep 0x84
[   82.588861] 4:3:1: cannot get freq at ep 0x84
[   82.621861] 4:3:1: cannot get freq at ep 0x84
[   82.643985] 4:3:1: cannot get freq at ep 0x84
[   90.788491] 4:3:1: cannot get freq at ep 0x84
[   90.810614] 4:3:1: cannot get freq at ep 0x84
[   93.336327] init: plymouth-stop pre-start process (2376) terminated with status 1
[  107.098326] audit_printk_skb: 51 callbacks suppressed
[  107.098330] type=1400 audit(1528057044.855:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2481 comm="apparmor_parser"
[  107.098336] type=1400 audit(1528057044.855:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2481 comm="apparmor_parser"
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ sudo systemd-analyse
[sudo] password for alain: 
sudo: systemd-analyse: command not found
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ sudo systemd-analyse blame
sudo: systemd-analyse: command not found
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ sudo systemd-analyse critical-chain
sudo: systemd-analyse: command not found
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ 
      

Pas de problème pour "dmesg" mais les trois commandes suivantes sont inconnues

Le "boot info" m'a donné un peu de mal car je ne connaissais pas cette procédure  hmm  Quoiqu'il en soit, voilà l'URL
http://paste.ubuntu.com/p/q5TZQmrwfy/

J'espère que j'ai bien recopié...Que dois-je faire pour les"systemd" qui ne marchent pas ?

Hors ligne

#4 Le 03/06/2018, à 23:21

??

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Bonsoir.
N'aurais-tu pas bricolé quelque chose dans le matériels?
https://www.google.fr/search?as_q=&as_e … as_rights=


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic

Hors ligne

#5 Le 04/06/2018, à 00:44

Alaingenieux

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Bonsoir,
INCROYABLE !!! Avant de faire dodo, j'ai voulu venir voir si tu m'avais trouvé un bug dans ce que je t'ai envoyé et là,  OH STUPEUR, mon ordi a démarré en 37 secondes TOUT compris!
Non, je n'ai rien changé au hardware depuis pas mal  de temps mais tout se passe comme si les manips que tu m'as fait faire avaient réglé le problème. J'ai refait quelques démarrages pour vérifier et ça marche.
Le dernier lien que tu m'as envoyé, renvoie à des problèmes de paramétrage de HDD, mais là non plus, je n'ai rien changé. De toutes façons, mon BIOS était lent aussi et je ne vois pas comment il pourrait être concerné par le disque dur ???
Cette histoire m'inquiète un peu car j'ai peur que ça recommence. Il me semble d'ailleurs qu'il y a 2 ou 3 mois, j'avais déjà eu ce problème de lenteur mais ça  ne s'était produit que  très peu de temps et je n'y pensais plus. Je crois d'ailleurs que ça avait disparu en coupant le courant " à la volée" ,( sans arrêter l'ordi )
Bon ! j'espère que ça marchera encore demain matin big_smile.
En attendant je te remercie de ton aide mais je vais attendre un peu avant de mettre mon post en  RESOLU, on ne sait jamais.

Hors ligne

#6 Le 04/06/2018, à 03:36

moko138

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

systemd-analyze : n'existe pas dans 14.04.
  - -

boot-info :

The Paste you are looking for does not currently exist.

Recommence.

  - -
Montre aussi

uname -m ; echo ; printenv GDMSESSION
sudo lshw

  - -

Concernant

[    1.632016] tsc: Refined TSC clocksource calibration: 2999.944 MHz
[    2.632053] Switched to clocksource tsc
[    6.548009] ata2.00: link is slow to respond, please be patient (ready=0)
[   10.748009] ata2.00: SRST failed (errno=-16)
[   16.584009] ata2.00: link is slow to respond, please be patient (ready=0)
[   20.784010] ata2.00: SRST failed (errno=-16)
[   26.620009] ata2.00: link is slow to respond, please be patient (ready=0)
[   55.796009] ata2.00: SRST failed (errno=-16)
[   55.796014] ata2.00: limiting SATA link speed to 1.5 Gbps
[   55.796017] ata2.01: limiting SATA link speed to 1.5 Gbps
[   60.848010] ata2.00: SRST failed (errno=-16)
[   60.858548] ata2.00: reset failed, giving up

Ces questions d'horloge et de System ReSeT (= SRST) failed sont une plaie.
Google indique des pistes hétérogènes dont aucune n'est probante.

C'est donc sur mon expérience que je m'appuierai pour lire tes retours.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#7 Le 04/06/2018, à 09:52

Alaingenieux

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Bonjour moko138,
D'abord merci de te pencher sur mon problème fantôme. Ce matin le démarrage se passe toujours normalement.
Si j'ai bien compris, tu suspectes le clocking et ça me plait assez car ça expliquerait que le BIOS soit affecté comme le processeur. Par contre je ne pige pas pourquoi ça ne se produit que pendant l'ouverture. En effet, une fois péniblement démarré, le système tournait normalement.
Que veux tu dire par " recommence" ?? tu parles du "dmesg" et du "boot info" ??  Confirme STP.
Vu que le problème a disparu, penses tu pouvoir tout de même faire un diag ?

Hors ligne

#8 Le 04/06/2018, à 12:22

inbox

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Salut,

Je pense qu'il faudrait vérifier que le câble Sata est correctement branché et qu'il n'a pas de défaut physique.

Il faut donc le débrancher/rebrancher en faisant bien attention que le câble soit bien enfiché.

Un test avec Smartmontools pourrait permettre de confirmer ou infirmer un éventuel problème de disque ou de connectique.

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

Hors ligne

#9 Le 04/06/2018, à 12:51

Alaingenieux

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

Pour moko138
Après relecture, je crois que c'est le boot-info que tu me demandais de refaire. Voici donc l'URL du retour. Si ça ne marche pas, dis le moi et j'essaierai de t'envoyer une sortie TEXTE:
http://paste.ubuntu.com/p/xbhyfy4GFr/

Et le retour des deux ordres supplémentaires:

         alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ uname -m ; echo ; printenv GDMSESSION
i686

xubuntu
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ sudo lshw
[sudo] password for alain: 
alain-p5k-e               
    description: Ordinateur de Bureau
    produit: P5K-E (To Be Filled By O.E.M.)
    fabriquant: System manufacturer
    version: System Version
    numéro de série: System Serial Number
    bits: 32 bits
    fonctionnalités: smbios-2.4 dmi-2.4 smp-1.4 smp
    configuration: boot=normal chassis=desktop cpus=2 family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=E0E6001E-8C00-0110-E926-001FC6011FE3
  *-core
       description: Carte mère
       produit: P5K-E
       fabriquant: ASUSTeK Computer INC.
       identifiant matériel: 0
       version: Rev 1.xx
       numéro de série: MS1C81BP5D00153
       emplacement: To Be Filled By O.E.M.
     *-firmware
          description: BIOS
          fabriquant: American Megatrends Inc.
          identifiant matériel: 0
          version: 0906
          date: 12/10/2007
          taille: 64KiB
          capacité: 1984KiB
          fonctionnalités: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
     *-cpu:0
          description: CPU
          produit: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz
          fabriquant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: 6.7.6
          numéro de série: 0001-0676-0000-0000-0000-0000
          emplacement: LGA775
          taille: 1998MHz
          capacité: 3800MHz
          bits: 64 bits
          horloge: 333MHz
          fonctionnalités: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dtherm retpoline tpr_shadow vnmi flexpriority cpufreq
          configuration: id=0
        *-cache:0
             description: L1 cache
             identifiant matériel: 5
             emplacement: L1-Cache
             taille: 64KiB
             capacité: 64KiB
             fonctionnalités: internal write-back data
        *-cache:1
             description: L2 cache
             identifiant matériel: 6
             emplacement: L2-Cache
             taille: 6MiB
             capacité: 6MiB
             fonctionnalités: internal write-back instruction
        *-logicalcpu:0
             description: CPU Logique
             identifiant matériel: 0.1
             bits: 64 bits
             fonctionnalités: logical
        *-logicalcpu:1
             description: CPU Logique
             identifiant matériel: 0.2
             bits: 64 bits
             fonctionnalités: logical
     *-memory
          description: Mémoire Système
          identifiant matériel: 3a
          emplacement: Carte mère
          taille: 2GiB
          capacité: 2GiB
        *-bank:0
             description: DIMM DDR Synchrone 800 MHz (1,2 ns)
             produit: PartNum0
             fabriquant: Manufacturer0
             identifiant matériel: 0
             numéro de série: SerNum0
             emplacement: DIMM0
             taille: 1GiB
             bits: 64 bits
             horloge: 800MHz (1.2ns)
        *-bank:1
             description: DIMM DDR Synchrone 800 MHz (1,2 ns)
             produit: PartNum1
             fabriquant: Manufacturer1
             identifiant matériel: 1
             numéro de série: SerNum1
             emplacement: DIMM1
             taille: 1GiB
             bits: 64 bits
             horloge: 800MHz (1.2ns)
        *-bank:2
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2015-09-02 17:06+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-07-20 12:05+0000X-Generator: Launchpad (build 18147) [vide]
             produit: PartNum2
             fabriquant: Manufacturer2
             identifiant matériel: 2
             numéro de série: SerNum2
             emplacement: DIMM2
        *-bank:3
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2015-09-02 17:06+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-07-20 12:05+0000X-Generator: Launchpad (build 18147) [vide]
             produit: PartNum3
             fabriquant: Manufacturer3
             identifiant matériel: 3
             numéro de série: SerNum3
             emplacement: DIMM3
     *-cpu:1
          identifiant matériel: 1
          information bus: cpu@1
          version: 6.7.6
          numéro de série: 0001-0676-0000-0000-0000-0000
          taille: 2997MHz
          capacité: 2997MHz
          fonctionnalités: vmx ht cpufreq
          configuration: id=0
        *-logicalcpu:0
             description: CPU Logique
             identifiant matériel: 0.1
             fonctionnalités: logical
        *-logicalcpu:1
             description: CPU Logique
             identifiant matériel: 0.2
             fonctionnalités: logical
     *-pci
          description: Host bridge
          produit: 82G33/G31/P35/P31 Express DRAM Controller
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 02
          bits: 32 bits
          horloge: 33MHz
        *-pci:0
             description: PCI bridge
             produit: 82G33/G31/P35/P31 Express PCI Express Root Port
             fabriquant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:40 portE/S:b000(taille=4096) mémoire:fa000000-fe8fffff portE/S:d0000000(taille=268435456)
           *-display
                description: VGA compatible controller
                produit: G86 [GeForce 8500 GT]
                fabriquant: NVIDIA Corporation
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: a1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
                configuration: driver=nouveau latency=0
                ressources: irq:45 mémoire:fd000000-fdffffff mémoire:d0000000-dfffffff mémoire:fa000000-fbffffff portE/S:bc00(taille=128) mémoire:fe8e0000-fe8fffff
        *-usb:0
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #4
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:16 portE/S:a800(taille=32)
        *-usb:1
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #5
             fabriquant: Intel Corporation
             identifiant matériel: 1a.1
             information bus: pci@0000:00:1a.1
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:21 portE/S:a880(taille=32)
        *-usb:2
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #6
             fabriquant: Intel Corporation
             identifiant matériel: 1a.2
             information bus: pci@0000:00:1a.2
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:18 portE/S:ac00(taille=32)
        *-usb:3
             description: USB controller
             produit: 82801I (ICH9 Family) USB2 EHCI Controller #2
             fabriquant: Intel Corporation
             identifiant matériel: 1a.7
             information bus: pci@0000:00:1a.7
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:18 mémoire:f9fffc00-f9ffffff
        *-multimedia
             description: Audio device
             produit: 82801I (ICH9 Family) HD Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1b
             information bus: pci@0000:00:1b.0
             version: 02
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:46 mémoire:f9ff8000-f9ffbfff
        *-pci:1
             description: PCI bridge
             produit: 82801I (ICH9 Family) PCI Express Port 1
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:41 portE/S:1000(taille=4096) mémoire:80000000-803fffff portE/S:f8f00000(taille=1048576)
        *-pci:2
             description: PCI bridge
             produit: 82801I (ICH9 Family) PCI Express Port 5
             fabriquant: Intel Corporation
             identifiant matériel: 1c.4
             information bus: pci@0000:00:1c.4
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:42 portE/S:d000(taille=4096) mémoire:fea00000-feafffff portE/S:80400000(taille=2097152)
           *-storage
                description: SATA controller
                produit: JMB363 SATA/IDE Controller
                fabriquant: JMicron Technology Corp.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                version: 03
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: storage pm pciexpress ahci_1.0 bus_master cap_list rom
                configuration: driver=ahci latency=0
                ressources: irq:16 mémoire:feafe000-feafffff mémoire:feae0000-feaeffff
           *-ide
                description: IDE interface
                produit: JMB363 SATA/IDE Controller
                fabriquant: JMicron Technology Corp.
                identifiant matériel: 0.1
                information bus: pci@0000:03:00.1
                version: 03
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: ide pm bus_master cap_list
                configuration: driver=pata_jmicron latency=0
                ressources: irq:17 portE/S:dc00(taille=8) portE/S:d880(taille=4) portE/S:d800(taille=8) portE/S:d480(taille=4) portE/S:d400(taille=16)
        *-pci:3
             description: PCI bridge
             produit: 82801I (ICH9 Family) PCI Express Port 6
             fabriquant: Intel Corporation
             identifiant matériel: 1c.5
             information bus: pci@0000:00:1c.5
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:43 portE/S:c000(taille=4096) mémoire:fe900000-fe9fffff portE/S:80600000(taille=2097152)
           *-network
                description: Ethernet interface
                produit: 88E8056 PCI-E Gigabit Ethernet Controller
                fabriquant: Marvell Technology Group Ltd.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: eth0
                version: 12
                numéro de série: 00:1f:c6:01:1f:e3
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair
                ressources: irq:44 mémoire:fe9fc000-fe9fffff portE/S:c800(taille=256) mémoire:fe9c0000-fe9dffff
        *-usb:4
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:23 portE/S:a080(taille=32)
        *-usb:5
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #2
             fabriquant: Intel Corporation
             identifiant matériel: 1d.1
             information bus: pci@0000:00:1d.1
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:19 portE/S:a400(taille=32)
        *-usb:6
             description: USB controller
             produit: 82801I (ICH9 Family) USB UHCI Controller #3
             fabriquant: Intel Corporation
             identifiant matériel: 1d.2
             information bus: pci@0000:00:1d.2
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=0
             ressources: irq:18 portE/S:a480(taille=32)
        *-usb:7
             description: USB controller
             produit: 82801I (ICH9 Family) USB2 EHCI Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 1d.7
             information bus: pci@0000:00:1d.7
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:23 mémoire:f9fff800-f9fffbff
        *-pci:4
             description: PCI bridge
             produit: 82801 PCI Bridge
             fabriquant: Intel Corporation
             identifiant matériel: 1e
             information bus: pci@0000:00:1e.0
             version: 92
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci subtractive_decode bus_master cap_list
             ressources: portE/S:e000(taille=4096) mémoire:feb00000-febfffff
           *-communication NON-RÉCLAMÉ
                description: Communication controller
                produit: HSF 56k HSFi Modem
                fabriquant: Conexant Systems, Inc.
                identifiant matériel: 1
                information bus: pci@0000:05:01.0
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm bus_master cap_list
                configuration: latency=64
                ressources: mémoire:febf0000-febfffff portE/S:ec00(taille=8)
           *-firewire
                description: FireWire (IEEE 1394)
                produit: FW322/323 [TrueFire] 1394a Controller
                fabriquant: LSI Corporation
                identifiant matériel: 3
                information bus: pci@0000:05:03.0
                version: 70
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm ohci bus_master cap_list
                configuration: driver=firewire_ohci latency=64 maxlatency=24 mingnt=12
                ressources: irq:19 mémoire:febef000-febeffff
        *-isa
             description: ISA bridge
             produit: 82801IR (ICH9R) LPC Interface Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 02
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             ressources: irq:0
        *-ide:0
             description: IDE interface
             produit: 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 02
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ide pm bus_master cap_list
             configuration: driver=ata_piix latency=0
             ressources: irq:22 portE/S:9000(taille=8) portE/S:8c00(taille=4) portE/S:8880(taille=8) portE/S:8800(taille=4) portE/S:8480(taille=16) portE/S:8400(taille=16)
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: 82801I (ICH9 Family) SMBus Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 02
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:f9fff400-f9fff4ff portE/S:400(taille=32)
        *-ide:1
             description: IDE interface
             produit: 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]
             fabriquant: Intel Corporation
             identifiant matériel: 1f.5
             information bus: pci@0000:00:1f.5
             version: 02
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ide pm bus_master cap_list
             configuration: driver=ata_piix latency=0
             ressources: irq:22 portE/S:a000(taille=8) portE/S:9c00(taille=4) portE/S:9880(taille=8) portE/S:9800(taille=4) portE/S:9480(taille=16) portE/S:9400(taille=16)
     *-scsi:0
          identifiant matériel: 2
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk:0
             description: ATA Disk
             produit: WDC WD3200AAKX-0
             fabriquant: Western Digital
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: 15.0
             numéro de série: WD-WCC2E7JKN2U0
             taille: 298GiB (320GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=0d9e0d9e
           *-volume:0
                description: Windows NTFS volume
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                version: 3.1
                numéro de série: 761ef304-0e21-0e42-afad-3079c45f3c9a
                taille: 29GiB
                capacité: 29GiB
                fonctionnalités: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2008-11-10 19:53:04 filesystem=ntfs state=clean
           *-volume:1
                description: Extended partition
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                taille: 268GiB
                capacité: 268GiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: HPFS/NTFS partition
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   capacité: 84GiB
              *-logicalvolume:1
                   description: Linux filesystem partition
                   identifiant matériel: 6
                   nom logique: /dev/sda6
                   nom logique: /home
                   capacité: 156GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
              *-logicalvolume:2
                   description: Linux swap / Solaris partition
                   identifiant matériel: 7
                   nom logique: /dev/sda7
                   capacité: 2980MiB
                   fonctionnalités: nofs
              *-logicalvolume:3
                   description: Linux filesystem partition
                   identifiant matériel: 8
                   nom logique: /dev/sda8
                   nom logique: /
                   capacité: 24GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
        *-disk:1
             description: ATA Disk
             produit: Hitachi HDS72161
             fabriquant: Hitachi
             identifiant matériel: 0.1.0
             information bus: scsi@0:0.1.0
             nom logique: /dev/sdb
             version: P22O
             numéro de série: PVG904Z9UT4J9V
             taille: 149GiB (160GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=4c9db031
           *-volume
                description: Windows FAT volume
                fabriquant: mkdosfs
                identifiant matériel: 1
                information bus: scsi@0:0.1.0,1
                nom logique: /dev/sdb1
                version: FAT32
                numéro de série: 82dd-8ae6
                taille: 149GiB
                capacité: 149GiB
                fonctionnalités: primary fat initialized
                configuration: FATs=2 filesystem=fat
     *-scsi:1
          identifiant matériel: 3
          nom logique: scsi1
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: CDDVDW SH-S203B
             fabriquant: TSSTcorp
             identifiant matériel: 0.0.0
             information bus: scsi@1:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/sr0
             version: SB00
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-scsi:2
          identifiant matériel: 5
          nom logique: scsi4
          fonctionnalités: emulated
        *-cdrom
             description: DVD reader
             produit: DVD-ROM DVD-115
             fabriquant: PIONEER
             identifiant matériel: 0.1.0
             information bus: scsi@4:0.1.0
             nom logique: /dev/sr1
             version: 1.22
             fonctionnalités: removable audio dvd
             configuration: ansiversion=5 status=nodisc
  *-network
       description: Interface réseau sans fil
       identifiant matériel: 1
       information bus: usb@1:3
       nom logique: wlan0
       numéro de série: 00:15:af:65:10:29
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8187 driverversion=3.13.0-149-generic firmware=N/A ip=192.168.1.43 link=yes multicast=yes wireless=IEEE 802.11bg
alain @ alain-P5K-E  ~/Bureau
└─ $ ▶ 
             

Hors ligne

#10 Le 05/06/2018, à 10:41

Alaingenieux

Re : Démarrage lent avec Xubuntu 14.04.5 [DISPARU mais non RESOLU]

POUR MOKO138


Je t'ai envoyé les retours demandés mais je ne sais pas si tu as l'intention de poursuivre le diag de mon problème ou si je dois mettre le sujet en RESOLU puisque la panne a disparu. Dis moi ce que je dois faire et quoiqu'il en soit, merci pour ton aide.   Cordialement.

Hors ligne