Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/12/2017, à 17:48

Kimilie

Installation imprimante CANON PIXMA MG5750

Bonjour,

Je sais que le sujet a déjà été traité ici mais la solution qui a été trouvée ne fonctionne pas chez moi :
Mon imprimante CANON PIXMA MG5750 imprime bien mais ne scanne pas !

Donc, allons droit au but, et voici les retours de console des commandes demandées dans le sujet déjà traité :

uname -m && cat /etc/*release && echo "mon environement est ${XDG_CURRENT_DESKTOP}"

****@****-MS-7816:~$ uname -m && cat /etc/*release && echo "mon environement est ${XDG_CURRENT_DESKTOP}"
i686
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
NAME="Ubuntu"
VERSION="16.04.3 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.3 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
mon environement est Unity
dpkg -l | grep scangearmp

****@****-MS-7816:~$ dpkg -l | grep scangearmp
ii  scangearmp-common                            2.10-33~raring1                                     i386         ScanGear MP for Linux.
ii  scangearmp-mg5400series                      2.10-33~raring1                                     i386         ScanGear MP for Linux.
ii  scangearmp-mg6100series                      2.10-33~raring1                                     i386         ScanGear MP for Linux.
ii  scangearmp2                                  3.20-1                                              i386         ScanGear MP for Linux.
lsusb

****@****-MS-7816:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 13fe:1d00 Kingston Technology Company Inc. DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash Drive
Bus 003 Device 007: ID 04a9:178e Canon, Inc. 
Bus 003 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 003 Device 002: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 003 Device 006: ID 058f:9254 Alcor Micro Corp. Hub
Bus 003 Device 005: ID 11b0:6108 ATECH FLASH TECHNOLOGY 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
scanimage -L

****@****-MS-7816:~$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

De plus, j'ai déjà lancé les commandes suivantes :

sudo apt-get install libsane-extras

sudo apt-get install sane-utils

Et voici les retours d'autres commandes :

****@****-MS-7816:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x8087/0x8000 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x8087/0x8008 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x13fe/0x1d00 at 003:004: Access denied (insufficient permissions)
found USB scanner (vendor=0x04a9 [Canon], product=0x178e [MG5700 series]) at libusb:003:007
could not open USB device 0x046d/0xc31c at 003:003: Access denied (insufficient permissions)
could not open USB device 0x04b3/0x310c at 003:002: Access denied (insufficient permissions)
could not open USB device 0x058f/0x9254 at 003:006: Access denied (insufficient permissions)
could not open USB device 0x11b0/0x6108 at 003:005: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
****@****-MS-7816:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04a9 [Canon], product=0x178e [MG5700 series]) at libusb:003:007
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
****@****-MS-7816:~$ ls /etc/sane.d/
abaton.conf          coolscan2.conf      epson.conf      hs2p.conf        mustek_pp.conf   s9036.conf           teco2.conf
agfafocus.conf       coolscan3.conf      epsonds.conf    ibm.conf         mustek_usb.conf  saned.conf           teco3.conf
apple.conf           coolscan.conf       fujitsu.conf    kodakaio.conf    nec.conf         saned.conf.dpkg-new  test.conf
artec.conf           dc210.conf          genesys.conf    kodak.conf       net.conf         sceptre.conf         u12.conf
artec_eplus48u.conf  dc240.conf          geniusvp2.conf  leo.conf         p5.conf          sharp.conf           umax1220u.conf
avision.conf         dc25.conf           gphoto2.conf    lexmark.conf     pie.conf         sm3840.conf          umax.conf
bh.conf              dell1600n_net.conf  gt68xx.conf     ma1509.conf      pixma.conf       snapscan.conf        umax_pp.conf
canon630u.conf       dll.conf            hp3900.conf     magicolor.conf   plustek.conf     sp15c.conf           xerox_mfp.conf
canon.conf           dll.d               hp4200.conf     matsushita.conf  plustek_pp.conf  st400.conf
canon_dr.conf        dmc.conf            hp5400.conf     microtek2.conf   qcam.conf        stv680.conf
canon_pp.conf        epjitsu.conf        hp.conf         microtek.conf    ricoh.conf       tamarack.conf
cardscan.conf        epson2.conf         hpsj5s.conf     mustek.conf      rts8891.conf     teco1.conf
****@****-MS-7816:~$ cat /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#

# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp

Voilà, je vous remercie de bien vouloir m'aider !
smile

Hors ligne

#2 Le 23/05/2018, à 13:24

gigaset6

Re : Installation imprimante CANON PIXMA MG5750

UP as-tu trouvé la solution? parce-que j'ai le même problème, la PIXMA imprime mais ne scanne pas! (même environnement)

Hors ligne

#3 Le 23/05/2018, à 14:03

grandtoubab

Re : Installation imprimante CANON PIXMA MG5750

Salut
le principe est que libsane connaisse le matériel
Dans Debian ça se passe dans /lib/udev/rules.d/60-libsane.rules
Verifier que le nom est le meme dans Ubuntu

on trouve une règle pour chaque materiel
exemple
# Canon DR-2080C
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="1601", ENV{libsane_matched}="yes"

lsusb

dit
Bus 003 Device 007: ID 04a9:178e Canon, Inc.
il faut donc que le matériel  figure dans ce fichier,  et donc la commande
egrep 1601 /lib/udev/rules.d/60-libsane.rules
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="1601", ENV{libsane_matched}="yes"
vérifie celle de l'exemple

Si la commande

 egrep 178e /lib/udev/rules.d/60-libsane.rules

ne donne rien, il faut ajouter vous meme la règle

# Canon Pixma MG5750
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="178e", ENV{libsane_matched}="yes"

Dernière modification par grandtoubab (Le 23/05/2018, à 14:11)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne

#4 Le 23/05/2018, à 14:51

Kimilie

Re : Installation imprimante CANON PIXMA MG5750

Salut !

Je suis parvenu à installer cette imprimante en refaisant les étapes plusieurs fois.

Il me semble que c'est à la troisième installation que j'y suis parvenu. Avant la troisième install, seul le scanner fonctionnait mais maintenant c'est aussi l'impression qui fonctionne !

Hors ligne

#5 Le 23/05/2018, à 15:21

gigaset6

Re : Installation imprimante CANON PIXMA MG5750

Salut Kimilie, merci de ton retour, Salut grantoutab, le terminal me répond:

"ATTRS{idVendor}==04a9, : commande introuvable"

Hors ligne

#6 Le 23/05/2018, à 16:47

grandtoubab

Re : Installation imprimante CANON PIXMA MG5750

gigaset6 a écrit :

Salut Kimilie, merci de ton retour, Salut grantoutab, le terminal me répond:

"ATTRS{idVendor}==04a9, : commande introuvable"

ouh lala roll.... le texte en gras n'est pas une commande c'est l'exemple de la règle qui devrait exister dans le fichier /lib/udev/rules.d/60-libsane.rules
Sur ce forum une commande est indiquée sur fond noir

lsusb
 egrep 178e /lib/udev/rules.d/60-libsane.rules

Dernière modification par grandtoubab (Le 23/05/2018, à 16:48)


Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Hors ligne