Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/01/2018, à 18:49

degolarson

[résolu]Clé USB non vue dans Thunar

Bonjour
j'avais eu il y a quelque temps un souci de reconnaissance d'un HDD
Cette fois c'est une clé USB que je ne vois pas montée dans Thunar alors que je m'en étai servi encore ce matin
. voici les commandes testées

joel@joel-K70IJ:~$ ls /dev/sd*
/dev/sda  /dev/sda1  /dev/sda2  /dev/sda5  /dev/sdb
joel@joel-K70IJ:~$ 
joel@joel-K70IJ:~$ lsusb
Bus 002 Device 002: ID 048d:1167 Integrated Technology Express, Inc. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a116 Suyin Corp. UVC 1.3MPixel WebCam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
joel@joel-K70IJ:~$ 

et la commande

dmesg

(mais je n'arrive pas à copier tout le résultat)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-26-generic root=UUID=a754412a-5ee8-4084-b988-6804b2036c5e ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd80000-0x00000000bdd8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdd8f000-0x00000000bdddffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.         K70IJ               /K70IJ     , BIOS 203     08/03/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbdd80 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 3038M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff932f800ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff932f80092000] 92000 size 24576
[    0.000000] BRK [0x88f2c000, 0x88f2cfff] PGTABLE
[    0.000000] BRK [0x88f2d000, 0x88f2dfff] PGTABLE
[    0.000000] BRK [0x88f2e000, 0x88f2efff] PGTABLE
[    0.000000] BRK [0x88f2f000, 0x88f2ffff] PGTABLE
[    0.000000] BRK [0x88f30000, 0x88f30fff] PGTABLE
[    0.000000] BRK [0x88f31000, 0x88f31fff] PGTABLE
[    0.000000] BRK [0x88f32000, 0x88f32fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x321ac000-0x350cdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F93D0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BDD80100 000084 (v01 _ASUS_ Notebook 20090803 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BDD80290 0000F4 (v03 080309 FACP1439 20090803 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170531/tbfadt-603)
[    0.000000] ACPI: DSDT 0x00000000BDD80680 00CEB5 (v01 K70IJ  K70IJ203 00000203 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BDD8F000 000040
[    0.000000] ACPI: FACS 0x00000000BDD8F000 000040
[    0.000000] ACPI: APIC 0x00000000BDD80390 00005C (v01 080309 APIC1439 20090803 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BDD80430 00003C (v01 080309 OEMMCFG  20090803 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BDD80470 000176 (v01 _ASUS_ Notebook 20090803 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x00000000BDD80620 000054 (v01 080309 OEMECDT  20090803 MSFT 00000097)
[    0.000000] ACPI: DBGP 0x00000000BDD803F0 000034 (v01 080309 DBGP1439 20090803 MSFT 00000097)
[    0.000000] ACPI: BOOT 0x00000000BDD805F0 000028 (v01 080309 BOOT1439 20090803 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BDD8F040 000071 (v01 080309 OEMB1439 20090803 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BDD8D540 000038 (v01 080309 OEMHPET  20090803 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x00000000BDD8F0C0 002024 (v01 080309 GMCHSCI  20090803 MSFT 00000097)
[    0.000000] ACPI: ATKG 0x00000000BDD912F0 008024 (v01 022008 OEMATKG  20080220 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BDD99E00 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bdd7ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbdd55000-0xbdd7ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bdd7ffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bdd7ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bdd7ffff]
[    0.000000] On node 0 totalpages: 777495
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3991 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12086 pages used for memmap
[    0.000000]   DMA32 zone: 773504 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfed1ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @ffff93303da00000 s149784 r8192 d30440 u1048576
[    0.000000] pcpu-alloc: s149784 r8192 d30440 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 765324
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-26-generic root=UUID=a754412a-5ee8-4084-b988-6804b2036c5e ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2986012K/3109980K available (12300K kernel code, 2480K rwdata, 4004K rodata, 2372K init, 2368K bss, 123968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37814 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1995.067 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=7980268)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.016761] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.016801] Security Framework initialized
[    0.016803] Yama: becoming mindful.
[    0.016831] AppArmor: AppArmor initialized
[    0.019228] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.020522] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.020598] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020638] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020993] CPU: Physical Processor ID: 0
[    0.020994] CPU: Processor Core ID: 0
[    0.020996] mce: CPU supports 6 MCE banks
[    0.021006] process: using mwait in idle threads
[    0.021013] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.021014] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.021187] Freeing SMP alternatives memory: 36K
[    0.024157] smpboot: Max logical packages: 1
[    0.024550] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4200  @ 2.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] Hierarchical SRCU implementation.
[    0.068000] smp: Bringing up secondary CPUs ...
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.068000] smp: Brought up 1 node, 2 CPUs
[    0.068000] smpboot: Total of 2 processors activated (7980.26 BogoMIPS)
[    0.068380] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068400] devtmpfs: initialized
[    0.068400] x86/mm: Memory block size: 128MB
[    0.068623] evm: security.selinux
[    0.068624] evm: security.SMACK64
[    0.068625] evm: security.SMACK64EXEC
[    0.068626] evm: security.SMACK64TRANSMUTE
[    0.068626] evm: security.SMACK64MMAP
[    0.068627] evm: security.ima
[    0.068628] evm: security.capability
[    0.068682] PM: Registering ACPI NVS region [mem 0xbdd8f000-0xbdddffff] (331776 bytes)
[    0.068682] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.068682] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.068682] pinctrl core: initialized pinctrl subsystem
[    0.068682] RTC time: 17:22:33, date: 01/13/18
[    0.068682] NET: Registered protocol family 16
[    0.068784] cpuidle: using governor ladder
[    0.068784] cpuidle: using governor menu
[    0.068784] PCCT header not found.
[    0.068784] Simple Boot Flag at 0x51 set to 0x1
[    0.068784] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.068784] ACPI: bus type PCI registered
[    0.068784] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.068784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.068784] PCI: not using MMCONFIG
[    0.068784] PCI: Using configuration type 1 for base access
[    0.072060] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.072113] ACPI: Added _OSI(Module Device)
[    0.072114] ACPI: Added _OSI(Processor Device)
[    0.072115] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072116] ACPI: Added _OSI(Processor Aggregator Device)
[    0.072123] ACPI: EC: EC started
[    0.072124] ACPI: EC: interrupt blocked
[    0.080008] ACPI: \: Used as first EC
[    0.080008] ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.080008] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.080008] ACPI: Executed 1 blocks of module-level executable AML code
[    0.082425] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.082865] ACPI: Dynamic OEM Table Load:
[    0.082874] ACPI: SSDT 0xFFFF93303953F800 000206 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.083155] ACPI: Dynamic OEM Table Load:
[    0.083162] ACPI: SSDT 0xFFFF933039461800 000765 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.083658] ACPI: Dynamic OEM Table Load:
[    0.083664] ACPI: SSDT 0xFFFF93303948AE00 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.083845] ACPI: Dynamic OEM Table Load:
[    0.083851] ACPI: SSDT 0xFFFF9330395B0180 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.084277] ACPI: Interpreter enabled
[    0.084308] ACPI: (supports S0 S3 S4 S5)
[    0.084310] ACPI: Using IOAPIC for interrupt routing
[    0.084358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.085948] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.085968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.086397] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.096082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.096090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.096461] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.096463] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.096791] PCI host bridge to bus 0000:00
[    0.096794] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.096796] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.096798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.096800] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.096802] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff window]
[    0.096804] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.096815] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.096848] DMAR: Forcing write-buffer flush capability
[    0.096850] DMAR: Disabling IOMMU for graphics on this chipset
[    0.096952] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.096968] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[    0.096976] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.096982] pci 0000:00:02.0: reg 0x20: [io  0xdc00-0xdc07]
[    0.097099] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.097113] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[    0.097277] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.097346] pci 0000:00:1a.0: reg 0x20: [io  0xd880-0xd89f]
[    0.097508] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.097576] pci 0000:00:1a.1: reg 0x20: [io  0xd800-0xd81f]
[    0.097734] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.097803] pci 0000:00:1a.2: reg 0x20: [io  0xd480-0xd49f]
[    0.097972] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.098003] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[    0.098121] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.098235] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.098269] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[    0.098390] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.098515] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.098633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.098755] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.098880] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.099009] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.099135] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.099253] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.099322] pci 0000:00:1d.0: reg 0x20: [io  0xd400-0xd41f]
[    0.099478] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.099547] pci 0000:00:1d.1: reg 0x20: [io  0xd080-0xd09f]
[    0.099699] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.099768] pci 0000:00:1d.2: reg 0x20: [io  0xd000-0xd01f]
[    0.099934] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.099966] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[    0.100092] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.100202] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.100379] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.100614] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[    0.100642] pci 0000:00:1f.2: reg 0x10: [io  0xcc00-0xcc07]
[    0.100654] pci 0000:00:1f.2: reg 0x14: [io  0xc880-0xc883]
[    0.100666] pci 0000:00:1f.2: reg 0x18: [io  0xc800-0xc807]
[    0.100678] pci 0000:00:1f.2: reg 0x1c: [io  0xc480-0xc483]
[    0.100691] pci 0000:00:1f.2: reg 0x20: [io  0xc400-0xc40f]
[    0.100703] pci 0000:00:1f.2: reg 0x24: [io  0xc080-0xc08f]
[    0.100856] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[    0.100883] pci 0000:00:1f.5: reg 0x10: [io  0xbc00-0xbc07]
[    0.100895] pci 0000:00:1f.5: reg 0x14: [io  0xb880-0xb883]
[    0.100907] pci 0000:00:1f.5: reg 0x18: [io  0xb800-0xb807]
[    0.100918] pci 0000:00:1f.5: reg 0x1c: [io  0xb480-0xb483]
[    0.100930] pci 0000:00:1f.5: reg 0x20: [io  0xb400-0xb40f]
[    0.100942] pci 0000:00:1f.5: reg 0x24: [io  0xb080-0xb08f]
[    0.101140] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.101249] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.101298] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit]
[    0.101471] pci 0000:02:00.0: supports D1
[    0.101473] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.116029] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.116037] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.116147] pci 0000:03:00.0: [1969:1026] type 00 class 0x020000
[    0.116194] pci 0000:03:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[    0.116211] pci 0000:03:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.116361] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.132025] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.132030] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.132035] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.132150] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.132164] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.132166] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.132168] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.132170] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.132172] pci 0000:00:1e.0:   bridge window [mem 0xbde00000-0xffffffff window] (subtractive decode)
[    0.132986] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[    0.133056] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[    0.133122] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[    0.133185] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[    0.133251] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[    0.133317] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[    0.133383] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[    0.133449] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[    0.136008] ACPI: EC: EC stopped
[    0.136008] ACPI: EC: EC started
[    0.136008] ACPI: EC: interrupt blocked
[    0.141037] ACPI: EC: interrupt unblocked
[    0.141047] ACPI: EC: event unblocked
[    0.141074] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.141077] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot ECDT EC to handle transactions and events
[    0.141112] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.141114] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.144052] SCSI subsystem initialized
[    0.144052] libata version 3.00 loaded.
[    0.144052] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.144052] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.144052] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.144052] vgaarb: loaded
[    0.144057] ACPI: bus type USB registered
[    0.144085] usbcore: registered new interface driver usbfs
[    0.144095] usbcore: registered new interface driver hub
[    0.144108] usbcore: registered new device driver usb
[    0.144193] EDAC MC: Ver: 3.0.0
[    0.144322] PCI: Using ACPI for IRQ routing
[    0.157314] PCI: pci_cache_line_size set to 64 bytes
[    0.157396] e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
[    0.157398] e820: reserve RAM buffer [mem 0xbdd80000-0xbfffffff]
[    0.157536] NetLabel: Initializing
[    0.157537] NetLabel:  domain hash size = 128
[    0.157538] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.157562] NetLabel:  unlabeled traffic allowed by default
[    0.157588] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.157588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.157588] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.158100] clocksource: Switched to clocksource hpet
[    0.175609] VFS: Disk quotas dquot_6.6.0
[    0.175644] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.175822] AppArmor: AppArmor Filesystem Enabled
[    0.175909] pnp: PnP ACPI init
[    0.176094] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.176102] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176191] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.176254] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.176329] pnp 00:03: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[    0.176553] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.176556] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.176558] system 00:04: [io  0x0400-0x041f] has been reserved
[    0.176560] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.176563] system 00:04: [mem 0xfe9fb400-0xfe9fb4ff window] has been reserved
[    0.176566] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.176568] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.176571] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.176573] system 00:04: [mem 0xfed90000-0xfed90fff] has been reserved
[    0.176575] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved
[    0.176578] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved
[    0.176580] system 00:04: [mem 0xfed93000-0xfed93fff] has been reserved
[    0.176582] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.176585] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.176589] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176729] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved
[    0.176732] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.176736] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176825] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.176829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176921] system 00:07: [io  0x0250-0x0253] has been reserved
[    0.176923] system 00:07: [io  0x0256-0x025f] has been reserved
[    0.176926] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.176928] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.176930] system 00:07: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.176933] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.176935] system 00:07: [mem 0xfec38000-0xfec3ffff] has been reserved
[    0.176939] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.177066] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.177072] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.177384] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.177386] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.177389] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.177391] system 00:09: [mem 0x00100000-0xbddfffff] could not be reserved
[    0.177395] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.177551] pnp: PnP ACPI: found 10 devices
[    0.184989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.185038] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.185065] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbde00000-0xbdffffff 64bit pref]
[    0.185068] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.185085] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.185091] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.185102] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.185105] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.185111] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.185116] pci 0000:00:1c.5:   bridge window [mem 0xbde00000-0xbdffffff 64bit pref]
[    0.185124] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.185140] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.185142] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.185144] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.185147] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.185149] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff window]
[    0.185151] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.185153] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.185155] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.185156] pci_bus 0000:03: resource 2 [mem 0xbde00000-0xbdffffff 64bit pref]
[    0.185159] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.185160] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.185162] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.185164] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.185166] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xffffffff window]
[    0.185321] NET: Registered protocol family 2
[    0.185560] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.185694] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.185874] TCP: Hash tables configured (established 32768 bind 32768)
[    0.185966] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.186004] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.186127] NET: Registered protocol family 1
[    0.186158] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.187365] PCI: CLS 32 bytes, default 64
[    0.187437] Unpacking initramfs...
[    1.257423] Freeing initrd memory: 48264K
[    1.257668] Scanning for low memory corruption every 60 seconds
[    1.258087] audit: initializing netlink subsys (disabled)
[    1.258189] audit: type=2000 audit(1515864154.258:1): state=initialized audit_enabled=0 res=1
[    1.258609] Initialise system trusted keyrings
[    1.258624] Key type blacklist registered
[    1.258681] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.260778] zbud: loaded
[    1.261366] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.261617] fuse init (API version 7.26)
[    1.263494] Key type asymmetric registered
[    1.263497] Asymmetric key parser 'x509' registered
[    1.263566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.263611] io scheduler noop registered
[    1.263612] io scheduler deadline registered
[    1.263656] io scheduler cfq registered (default)
[    1.264607] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    1.264637] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    1.264666] pcieport 0000:00:1c.5: Signaling PME with IRQ 26
[    1.264696] pciehp 0000:00:1c.5:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.264823] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.264824] vesafb: scrolling: redraw
[    1.264826] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.264847] vesafb: framebuffer at 0xd0000000, mapped to 0xffffaa37c0c00000, using 3072k, total 3072k
[    1.264990] Console: switching to colour frame buffer device 128x48
[    1.265017] fb0: VESA VGA frame buffer device
[    1.265036] intel_idle: does not run on family 6 model 23
[    1.265220] ACPI: AC Adapter [AC0] (on-line)
[    1.265307] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.265343] ACPI: Sleep Button [SLPB]
[    1.266582] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.268630] ACPI: Lid Switch [LID]
[    1.268684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.268710] ACPI: Power Button [PWRF]
[    1.269126] Monitor-Mwait will be used to enter C-1 state
[    1.269131] Monitor-Mwait will be used to enter C-2 state
[    1.269134] Monitor-Mwait will be used to enter C-3 state
[    1.269138] tsc: Marking TSC unstable due to TSC halts in idle
[    1.272503] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.272893] thermal LNXTHERM:00: registered as thermal_zone0
[    1.272895] ACPI: Thermal Zone [THRM] (55 C)
[    1.272950] GHES: HEST is not enabled!
[    1.273110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.276324] Linux agpgart interface v0.103
[    1.279087] loop: module loaded
[    1.279317] ata_piix 0000:00:1f.2: version 2.13
[    1.279484] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    1.281190] scsi host0: ata_piix
[    1.281417] scsi host1: ata_piix
[    1.281474] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    1.281478] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    1.281595] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.281659] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.282094] scsi host2: ata_piix
[    1.282331] scsi host3: ata_piix
[    1.282384] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[    1.282386] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[    1.282580] libphy: Fixed MDIO Bus: probed
[    1.282582] tun: Universal TUN/TAP device driver, 1.6
[    1.282700] PPP generic driver version 2.4.2
[    1.282794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.282800] ehci-pci: EHCI PCI platform driver
[    1.282996] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.283005] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.283020] ehci-pci 0000:00:1a.7: debug port 1
[    1.286934] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.286950] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[    1.300099] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.300169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.300171] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300173] usb usb1: Product: EHCI Host Controller
[    1.300175] usb usb1: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
[    1.300176] usb usb1: SerialNumber: 0000:00:1a.7
[    1.300371] hub 1-0:1.0: USB hub found
[    1.300380] hub 1-0:1.0: 6 ports detected
[    1.301541] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.301547] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.301562] ehci-pci 0000:00:1d.7: debug port 1
[    1.305460] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.305473] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[    1.320057] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.320106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.320109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.320111] usb usb2: Product: EHCI Host Controller
[    1.320112] usb usb2: Manufacturer: Linux 4.13.0-26-generic ehci_hcd
[    1.320114] usb usb2: SerialNumber: 0000:00:1d.7
[    1.320295] hub 2-0:1.0: USB hub found
[    1.320303] hub 2-0:1.0: 6 ports detected
[    1.321347] ehci-platform: EHCI generic platform driver
[    1.321373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.321379] ohci-pci: OHCI PCI platform driver
[    1.321396] ohci-platform: OHCI generic platform driver
[    1.321405] uhci_hcd: USB Universal Host Controller Interface driver
[    1.321510] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.321517] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.321525] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.321557] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[    1.321618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.321621] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.321622] usb usb3: Product: UHCI Host Controller
[    1.321624] usb usb3: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.321626] usb usb3: SerialNumber: 0000:00:1a.0
[    1.321799] hub 3-0:1.0: USB hub found
[    1.321807] hub 3-0:1.0: 2 ports detected
[    1.322320] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.322326] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.322333] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.322363] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[    1.322424] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.322426] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.322428] usb usb4: Product: UHCI Host Controller
[    1.322430] usb usb4: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.322432] usb usb4: SerialNumber: 0000:00:1a.1
[    1.322601] hub 4-0:1.0: USB hub found
[    1.322608] hub 4-0:1.0: 2 ports detected
[    1.323096] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.323102] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.323110] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.323132] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[    1.323197] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.323199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.323201] usb usb5: Product: UHCI Host Controller
[    1.323203] usb usb5: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.323205] usb usb5: SerialNumber: 0000:00:1a.2
[    1.323376] hub 5-0:1.0: USB hub found
[    1.323384] hub 5-0:1.0: 2 ports detected
[    1.323870] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.323877] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.323884] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.323908] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    1.323975] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.323977] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.323979] usb usb6: Product: UHCI Host Controller
[    1.323981] usb usb6: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.323982] usb usb6: SerialNumber: 0000:00:1d.0
[    1.324167] hub 6-0:1.0: USB hub found
[    1.324175] hub 6-0:1.0: 2 ports detected
[    1.324725] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.324734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.324743] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.324771] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[    1.324830] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.324832] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.324834] usb usb7: Product: UHCI Host Controller
[    1.324836] usb usb7: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.324838] usb usb7: SerialNumber: 0000:00:1d.1
[    1.325003] hub 7-0:1.0: USB hub found
[    1.325011] hub 7-0:1.0: 2 ports detected
[    1.325622] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.325658] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.325666] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.325693] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[    1.325776] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.325778] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.325780] usb usb8: Product: UHCI Host Controller
[    1.325782] usb usb8: Manufacturer: Linux 4.13.0-26-generic uhci_hcd
[    1.325784] usb usb8: SerialNumber: 0000:00:1d.2
[    1.325980] hub 8-0:1.0: USB hub found
[    1.325988] hub 8-0:1.0: 2 ports detected
[    1.326610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.337488] i8042: Detected active multiplexing controller, rev 1.1
[    1.347343] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.347348] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.347395] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.347432] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.347467] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.347704] mousedev: PS/2 mouse device common for all mice
[    1.348048] rtc_cmos 00:01: RTC can wake from S4
[    1.348307] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.348342] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.348353] i2c /dev entries driver
[    1.348466] device-mapper: uevent: version 1.0.3
[    1.348599] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.348647] ledtrig-cpu: registered to indicate activity on CPUs
[    1.349299] NET: Registered protocol family 10
[    1.357003] Segment Routing with IPv6
[    1.357036] NET: Registered protocol family 17
[    1.357051] Key type dns_resolver registered
[    1.357458] RAS: Correctable Errors collector initialized.
[    1.357508] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    1.357596] microcode: Microcode Update Driver: v2.2.
[    1.357928] registered taskstats version 1
[    1.357942] Loading compiled-in X.509 certificates
[    1.362864] Loaded X.509 cert 'Build time autogenerated kernel key: b1931af2efdddab2cc28005a48cb6f00161c7d17'
[    1.362926] zswap: loaded using pool lzo/zbud
[    1.366140] ACPI: Battery Slot [BAT0] (battery present)
[    1.369747] Key type big_key registered
[    1.369755] Key type trusted registered
[    1.372830] Key type encrypted registered
[    1.372835] AppArmor: AppArmor sha1 policy hashing enabled
[    1.372839] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.372879] evm: HMAC attrs: 0x1
[    1.373269]   Magic number: 2:571:390
[    1.373284] usb usb8: hash matches
[    1.373469] rtc_cmos 00:01: setting system clock to 2018-01-13 17:22:35 UTC (1515864155)
[    1.374192] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.374193] EDD information not available.
[    1.374232] PM: Hibernation image not present or could not be loaded.
[    1.389950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.628058] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.752129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.752294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.754660] ata1.00: supports DRM functions and may not be fully accessible
[    1.754663] ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU01, max UDMA/133
[    1.754667] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.761093] ata1.00: supports DRM functions and may not be fully accessible
[    1.765202] ata1.00: configured for UDMA/133
[    1.765419] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5
[    1.765719] ata1.00: Enabling discard_zeroes_data
[    1.765766] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.765809] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.765812] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.765829] sd 0:0:0:0: [sda] Write Protect is off
[    1.765832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.765899] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.766151] ata1.00: Enabling discard_zeroes_data
[    1.767011]  sda: sda1 sda2 < sda5 >
[    1.767416] ata1.00: Enabling discard_zeroes_data
[    1.768051] sd 0:0:0:0: [sda] supports TCG Opal
[    1.768054] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.772237] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.02, max UDMA/100
[    1.776903] ata2.00: configured for UDMA/100
[    1.779700] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT10N     1.02 PQ: 0 ANSI: 5
[    1.807347] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.807348] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.807535] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.807610] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.812210] Freeing unused kernel memory: 2372K
[    1.812216] Write protecting the kernel read-only data: 18432k
[    1.813751] Freeing unused kernel memory: 2024K
[    1.814167] Freeing unused kernel memory: 92K
[    1.817385] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.817386] x86/mm: Checking user space page tables
[    1.820329] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.827271] usb 1-3: New USB device found, idVendor=064e, idProduct=a116
[    1.827274] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.827277] usb 1-3: Product: USB2.0 UVC 1.3M WebCam
[    1.827278] usb 1-3: Manufacturer: SuYin
[    1.827280] usb 1-3: SerialNumber: CN1316-S30B-MI033-VS-R03.02.04
[    1.986256] pci 0000:00:00.0: Intel GM45 Chipset
[    1.986278] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.986588] pci 0000:00:00.0: detected 32768K stolen memory
[    1.986619] [drm] Memory usable by graphics device = 2048M
[    1.986623] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.986624] fb: switching to inteldrmfb from VESA VGA
[    1.986667] Console: switching to colour dummy device 80x25
[    1.986824] [drm] Replacing VGA console driver
[    1.992863] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.992865] [drm] Driver supports precise vblank timestamp query.
[    1.995698] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.044576] [drm] RC6 disabled, disabling runtime PM support
[    2.046650] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.046933] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.055236] acpi device:37: registered as cooling_device2
[    2.055945] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.087822] ATL1E 0000:03:00.0 enp3s0: renamed from eth0
[    2.268023] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3983f441a37, max_idle_ns: 881590510371 ns
[    2.942339] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    2.977379] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    3.010984] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[    3.136815] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    3.863195] fbcon: inteldrmfb (fb0) is primary device
[    3.863295] Console: switching to colour frame buffer device 200x56
[    3.863343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.965151] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.111925] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.112161] systemd[1]: Detected architecture x86-64.
[    4.112502] systemd[1]: Set hostname to <joel-K70IJ>.
[    4.247728] systemd[1]: Reached target User and Group Name Lookups.
[    4.247915] systemd[1]: Listening on udev Kernel Socket.
[    4.248048] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    4.248167] systemd[1]: Listening on Journal Socket.
[    4.248232] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.248261] systemd[1]: Reached target Encrypted Volumes.
[    4.248405] systemd[1]: Listening on Journal Audit Socket.
[    4.320251] lp: driver loaded but no devices found
[    4.330225] ppdev: user-space parallel port driver
[    4.499858] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.624680] systemd-journald[257]: Received request to flush runtime journal from PID 1
[    4.955884] audit: type=1400 audit(1515864159.082:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=460 comm="apparmor_parser"
[    4.955892] audit: type=1400 audit(1515864159.082:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 comm="apparmor_parser"
[    4.955896] audit: type=1400 audit(1515864159.082:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=460 comm="apparmor_parser"
[    4.955899] audit: type=1400 audit(1515864159.082:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=460 comm="apparmor_parser"
[    4.963430] audit: type=1400 audit(1515864159.089:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=459 comm="apparmor_parser"
[    4.963437] audit: type=1400 audit(1515864159.089:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=459 comm="apparmor_parser"
[    4.982043] audit: type=1400 audit(1515864159.108:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=461 comm="apparmor_parser"
[    4.982049] audit: type=1400 audit(1515864159.108:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=461 comm="apparmor_parser"
[    4.982051] audit: type=1400 audit(1515864159.108:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//snap_update_ns" pid=461 comm="apparmor_parser"
[    5.197492] asus_laptop: Asus Laptop Support version 0.42
[    5.197639] asus_laptop:   K70IJ model detected
[    5.198350] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input13
[    5.268181] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x000000010) is beyond end of object (length 0x10) (20170531/exoparg2-427)
[    5.268194] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.STBR, AE_AML_BUFFER_LIMIT (20170531/psparse-550)
[    5.268203] ACPI Error: Method parse/execution failed \_SB.PCI0.VGA.LCDD._BCM, AE_AML_BUFFER_LIMIT (20170531/psparse-550)
[    5.268213] ACPI Error: Evaluating _BCM failed (20170531/video-364)
[    5.270584] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.379436] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMIO) (20170531/utaddress-247)
[    5.379448] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.379451] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170531/utaddress-247)
[    5.379455] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.379456] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170531/utaddress-247)
[    5.379460] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.379461] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.431891] media: Linux media interface: v0.10
[    5.493214] Linux video capture interface: v2.00
[    5.629322] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[    5.647467] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized!
[    5.647472] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[    5.647474] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized!
[    5.647476] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[    5.650079] input: USB2.0 UVC 1.3M WebCam: USB2.0  as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input14
[    5.650813] usbcore: registered new interface driver uvcvideo
[    5.650816] USB Video Class driver (1.1.1)
[    5.703789] ath: phy0: Enable LNA combining
[    5.707769] intel_powerclamp: No package C-state available
[    5.714448] ath: phy0: ASPM enabled: 0x42
[    5.714453] ath: EEPROM regdomain: 0x60
[    5.714453] ath: EEPROM indicates we should expect a direct regpair map
[    5.714456] ath: Country alpha2 being used: 00
[    5.714457] ath: Regpair used: 0x60
[    5.764915] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.766538] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffaa37c0b40000, irq=17
[    6.018900] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:speaker
[    6.018903] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.018905] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    6.018907] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    6.018909] snd_hda_codec_via hdaudioC0D0:    inputs:
[    6.018911] snd_hda_codec_via hdaudioC0D0:      Internal Mic=0x1e
[    6.018914] snd_hda_codec_via hdaudioC0D0:      Mic=0x1a
[    6.051074] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    6.051159] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    6.051237] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    6.834980] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[    7.007954] Adding 3108860k swap on /dev/sda5.  Priority:-1 extents:1 across:3108860k SSFS
[    7.849414] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.884253] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.899105] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    7.899494] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    8.051146] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    9.113430] kauditd_printk_skb: 21 callbacks suppressed
[    9.113432] audit: type=1400 audit(1515864163.239:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine" pid=1000 comm="apparmor_parser"
[    9.128644] audit: type=1400 audit(1515864163.254:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1000 comm="apparmor_parser"
[    9.128650] audit: type=1400 audit(1515864163.254:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//snap_update_ns" pid=1000 comm="apparmor_parser"
[    9.148564] audit: type=1400 audit(1515864163.275:35): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1004 comm="apparmor_parser"
[    9.338677] audit: type=1400 audit(1515864163.465:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.keepassxc.cli" pid=1020 comm="apparmor_parser"
[    9.349938] audit: type=1400 audit(1515864163.476:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.keepassxc.keepassxc" pid=1022 comm="apparmor_parser"
[   10.133030] wlp2s0: authenticate with e4:9e:12:d4:77:0c
[   10.152720] wlp2s0: send auth to e4:9e:12:d4:77:0c (try 1/3)
[   10.154387] wlp2s0: authenticated
[   10.161075] wlp2s0: associate with e4:9e:12:d4:77:0c (try 1/3)
[   10.164754] wlp2s0: RX AssocResp from e4:9e:12:d4:77:0c (capab=0x411 status=0 aid=1)
[   10.164913] wlp2s0: associated
[   10.164968] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   40.261521] random: crng init done
[   52.516057] usb 2-4: new high-speed USB device number 2 using ehci-pci
[   52.664466] usb 2-4: New USB device found, idVendor=048d, idProduct=1167
[   52.664469] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   52.691268] usb-storage 2-4:1.0: USB Mass Storage device detected
[   52.693256] scsi host4: usb-storage 2-4:1.0
[   52.693413] usbcore: registered new interface driver usb-storage
[   52.698244] usbcore: registered new interface driver uas
[   53.724837] scsi 4:0:0:0: Direct-Access     XXXXXXXX U167CONTROLLER   0.00 PQ: 0 ANSI: 2
[   53.725312] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   53.729128] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   85.956081] usb 2-1: new high-speed USB device number 3 using ehci-pci
[   86.111913] usb 2-1: New USB device found, idVendor=058f, idProduct=6387
[   86.111919] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   86.111923] usb 2-1: SerialNumber: 16080807001931
[   86.113525] usb-storage 2-1:1.0: USB Mass Storage device detected
[   86.113713] scsi host5: usb-storage 2-1:1.0
[   87.134023] scsi 5:0:0:0: Direct-Access                               8.07 PQ: 0 ANSI: 4
[   87.135325] sd 5:0:0:0: Attached scsi generic sg3 type 0
[   87.138621] sd 5:0:0:0: [sdc] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
[   87.139884] sd 5:0:0:0: [sdc] Write Protect is off
[   87.139889] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[   87.141007] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   87.147023]  sdc: sdc1
[   87.151377] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[  111.760366] usb 2-1: USB disconnect, device number 3
[  279.090165] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  618.348854] perf: interrupt took too long (3161 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
[ 1003.307802] perf: interrupt took too long (3973 > 3951), lowering kernel.perf_event_max_sample_rate to 50250
joel@joel-K70IJ:~$ 

Dernière modification par degolarson (Le 05/02/2018, à 17:54)


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne

#2 Le 13/01/2018, à 19:13

degolarson

Re : [résolu]Clé USB non vue dans Thunar

Je précise que cette clé Intenso clignote sans arrêt, donc je ne la retire pas brutalement, j'éteins la machine avant
merci


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne

#3 Le 03/02/2018, à 16:33

degolarson

Re : [résolu]Clé USB non vue dans Thunar

Bonjour
Gparted ne la voit pas non plus : pas de sdb dans les périphériques
Quelqu'un a une idée ?
merci

Dernière modification par degolarson (Le 03/02/2018, à 16:35)


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne

#4 Le 03/02/2018, à 21:52

??

Re : [résolu]Clé USB non vue dans Thunar

Bonsoir.
Débranches la clé usb,  attends 30 secondes.
Branches la clé usb, attends 30 secondes.
Postes le résultat de

dmesg  | tail -30

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#5 Le 04/02/2018, à 11:28

degolarson

Re : [résolu]Clé USB non vue dans Thunar

Voilà

joel@joel-K70IJ:~$ dmesg  | tail -30
[    9.284285] audit: type=1400 audit(1517739058.418:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.keepassxc.cli" pid=1019 comm="apparmor_parser"
[    9.299482] audit: type=1400 audit(1517739058.433:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.keepassxc.keepassxc" pid=1021 comm="apparmor_parser"
[   10.249029] wlp2s0: authenticate with e4:9e:12:d4:77:0c
[   10.270808] wlp2s0: send auth to e4:9e:12:d4:77:0c (try 1/3)
[   10.274941] wlp2s0: authenticated
[   10.276298] wlp2s0: associate with e4:9e:12:d4:77:0c (try 1/3)
[   10.280405] wlp2s0: RX AssocResp from e4:9e:12:d4:77:0c (capab=0x411 status=0 aid=1)
[   10.280565] wlp2s0: associated
[   10.280627] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  150.952027] random: crng init done
[  835.137499] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[  880.676072] usb 2-4: new high-speed USB device number 2 using ehci-pci
[  880.824453] usb 2-4: New USB device found, idVendor=048d, idProduct=1167
[  880.824458] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  880.850986] usb-storage 2-4:1.0: USB Mass Storage device detected
[  880.851175] scsi host4: usb-storage 2-4:1.0
[  880.852300] usbcore: registered new interface driver usb-storage
[  880.855748] usbcore: registered new interface driver uas
[  881.852861] scsi 4:0:0:0: Direct-Access     XXXXXXXX U167CONTROLLER   0.00 PQ: 0 ANSI: 2
[  881.854427] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  881.856456] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  909.417970] usb 2-4: USB disconnect, device number 2
[  960.616104] usb 2-4: new high-speed USB device number 3 using ehci-pci
[  960.764476] usb 2-4: New USB device found, idVendor=048d, idProduct=1167
[  960.764481] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  960.765108] usb-storage 2-4:1.0: USB Mass Storage device detected
[  960.765328] scsi host4: usb-storage 2-4:1.0
[  961.788896] scsi 4:0:0:0: Direct-Access     XXXXXXXX U167CONTROLLER   0.00 PQ: 0 ANSI: 2
[  961.789532] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  961.796940] sd 4:0:0:0: [sdb] Attached SCSI removable disk
joel@joel-K70IJ:~$ 

merci


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne

#6 Le 04/02/2018, à 19:56

??

Re : [résolu]Clé USB non vue dans Thunar

Bonsoir

Tu vas devoir changer de clé USB car celle-ci est morte. Dans la trace de connexion

960.616104] usb 2-4: new high-speed USB device number 3 using ehci-pci
[  960.764476] usb 2-4: New USB device found, idVendor=048d, idProduct=1167
[  960.764481] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  960.765108] usb-storage 2-4:1.0: USB Mass Storage device detected
[  960.765328] scsi host4: usb-storage 2-4:1.0
[  961.788896] scsi 4:0:0:0: Direct-Access     XXXXXXXX U167CONTROLLER   0.00 PQ: 0 ANSI: 2
[  961.789532] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  961.796940] sd 4:0:0:0: [sdb] Attached SCSI removable disk
joel@joel-K70IJ:~$ 

La clé oublie d'indiquer quelle est sa capacité.   Donc, il devient impossible de la formater
Ci-dessous, un bon montage de clé USB

6458.492054] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 6458.656783] usb 1-1: New USB device found, idVendor=0951, idProduct=1666
[ 6458.656789] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6458.656791] usb 1-1: Product: DataTraveler 3.0
[ 6458.656793] usb 1-1: Manufacturer: Kingston
[ 6458.656795] usb 1-1: SerialNumber: 08606E6D3FDBBE517708233B
[ 6459.158763] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 6459.162144] scsi host2: usb-storage 1-1:1.0
[ 6459.162359] usbcore: registered new interface driver usb-storage
[ 6459.198703] usbcore: registered new interface driver uas
[ 6460.252358] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 6460.257461] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6461.045711] sd 2:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#7 Le 05/02/2018, à 11:09

degolarson

Re : [résolu]Clé USB non vue dans Thunar

Bonjour
Effectivement j'ai testé une autre clé, qui marche et les données sont plus complètes :

joel@joel-K70IJ:~$ dmesg  | tail -30
[ 2288.183241] RDX: 00000214c25593b8 RSI: 00000214c25593b8 RDI: 0000000000000000
[ 2288.183242] RBP: ffffad9380697ea0 R08: 0000000000000101 R09: 0000000000000002
[ 2288.183243] R10: ffffad9380697e10 R11: 000000000000033f R12: 0000000000000003
[ 2288.183244] R13: ffff9d15302e5e00 R14: ffffffffb8786b78 R15: 00000214c24aa148
[ 2288.183248]  ? cpuidle_enter_state+0x11e/0x2e0
[ 2288.183250]  cpuidle_enter+0x17/0x20
[ 2288.183252]  call_cpuidle+0x23/0x40
[ 2288.183253]  do_idle+0x18c/0x1f0
[ 2288.183255]  cpu_startup_entry+0x73/0x80
[ 2288.183257]  start_secondary+0x175/0x1b0
[ 2288.183260]  secondary_startup_64+0x9f/0xa0
[ 2288.183262] Code: ff 48 8b 95 70 ff ff ff 4c 8b ab d8 00 00 00 4c 8b b2 d8 00 00 00 e9 35 fa ff ff 48 89 de 4c 89 ff e8 5e 22 fe ff e9 76 fa ff ff <0f> ff 48 89 df e8 ff 14 5a f7 e9 7d f8 ff ff 4c 89 ff 44 8b a5 
[ 2288.183297] ---[ end trace 59b78184aa9b4c1a ]---
[ 5134.732065] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 5134.887955] usb 2-4: New USB device found, idVendor=058f, idProduct=6387
[ 5134.887960] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5134.887963] usb 2-4: SerialNumber: 16080807001788
[ 5134.906953] audit: type=1400 audit(1517825194.684:48): apparmor="DENIED" operation="open" profile="snap.keepassxc.keepassxc" name="/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/busnum" pid=3715 comm=5468726561642028706F6F6C656429 requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5134.921239] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 5134.921820] scsi host4: usb-storage 2-4:1.0
[ 5134.923355] usbcore: registered new interface driver usb-storage
[ 5134.928457] usbcore: registered new interface driver uas
[ 5135.934106] scsi 4:0:0:0: Direct-Access                               8.07 PQ: 0 ANSI: 4
[ 5135.934568] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5135.937325] sd 4:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
[ 5135.938585] sd 4:0:0:0: [sdb] Write Protect is off
[ 5135.938588] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5135.939714] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5135.948469]  sdb: sdb1
[ 5135.952213] sd 4:0:0:0: [sdb] Attached SCSI removable disk
joel@joel-K70IJ:~$ 

Je n'ai plus qu'à donner l'autre au recyclage
merci


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne

#8 Le 05/02/2018, à 14:18

??

Re : [résolu]Clé USB non vue dans Thunar

Ta bonne clé
[ 5134.732065] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 5134.887955] usb 2-4: New USB device found, idVendor=058f, idProduct=6387
[ 5134.887960] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5134.887963] usb 2-4: SerialNumber: 16080807001788

Ta clé muette
[  880.676072] usb 2-4: new high-speed USB device number 2 using ehci-pci
[  880.824453] usb 2-4: New USB device found, idVendor=048d, idProduct=1167
[  880.824458] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#9 Le 05/02/2018, à 17:54

degolarson

Re : [résolu]Clé USB non vue dans Thunar

ok je mets résolu


2018-2020 Xubuntu 18.04 LTS 64b    Nov 2020 Debian Buster Laptop Asus PRO79IJ-TY025E      SSD 250Go   RAM 2.9Go puis 4Go en sept2020    2 x Pentium (R) Dual-Core T4200  2GHz    année 2009    LiveboxSosh
IntelMobile4SeriesGMA500, wifi  Atheros 9285   
Doucement, nous sommes pressés 
Les jeunes sont ce qu'en font les vieux cons (Pierre Desproges )

Hors ligne