Pages : 1
#1 Le 04/01/2018, à 16:52
- manudelta
Problème sortie de veille PCI
Bonjour,
j'ai un HP ProBook 470 G3 sous ubuntu 17.10. La mise en veille semble fonctionner correctement, mais après la sortie de veille, je ne peux plus ni mettre en veille ni arrêter l'ordinateur. Lorsque j'essaye de l'arrêter, il se fige complètement et je dois l'éteindre en coupant l'alimentation.
D'autre part, après une sortie de veille, la commande lspci bloque complètement. Je suppose donc que c'est un périphérique PCI qui ne supporte pas bien la mise en veille, mais je ne vois pas lequel.
J'ai fait différentes tentatives dans les options de démarrage de grub, dont pci=noacpi, mais il refuse complètement de démarrer avec cette option.
Pour info, ci dessous le résultat de lspci avant une mise en veille :
$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] (rev 83)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Intel Corporation Wireless 3165 (rev 81)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)Un extrait de dmesg qui est peut-être important ?
[ 16.087266] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9c327660d1b0 (20170531/exresop-593)
[ 16.087274] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[ 16.087279] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.087286] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.087978] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9c327660d7e0 (20170531/exresop-593)
[ 16.087982] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[ 16.087985] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.087989] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.088658] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9c326b4014c8 (20170531/exresop-593)
[ 16.088661] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[ 16.088664] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.088668] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.088709] input: HP WMI hotkeys as /devices/virtual/input/input16
[ 16.090677] ACPI Error: Attempt to CreateField of length zero (20170531/dsopcode-168)
[ 16.090683] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20170531/psparse-550)
[ 16.090694] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20170531/psparse-550)Et un extrait de dmesg après une sortie de veille qui indique probablement le périphérique concerné, mais je ne sais pas comment aller plus loin :
[ 235.104887] pciehp 0000:00:1d.0:pcie004: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
[ 235.104888] pciehp 0000:00:1d.0:pcie004: Cannot add device at 0000:04:00Si ça peut aider, j'ai aussi fait
$ dmesg | grep 0:1d
[ 3.245257] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 3.245316] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.296058] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 3.296062] pci 0000:00:1d.0: bridge window [mem 0xe2300000-0xe23fffff]
[ 3.350039] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 3.350041] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 3.350053] pci 0000:00:1d.0: BAR 15: assigned [mem 0xbe900000-0xbeafffff 64bit pref]
[ 3.350055] pci 0000:00:1d.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 3.350086] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 3.350087] pci 0000:00:1d.0: bridge window [io 0x6000-0x6fff]
[ 3.350090] pci 0000:00:1d.0: bridge window [mem 0xe2300000-0xe23fffff]
[ 3.350092] pci 0000:00:1d.0: bridge window [mem 0xbe900000-0xbeafffff 64bit pref]
[ 4.051746] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[ 4.051780] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 4.051793] pciehp 0000:00:1d.0:pcie004: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 235.104887] pciehp 0000:00:1d.0:pcie004: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
[ 235.104888] pciehp 0000:00:1d.0:pcie004: Cannot add device at 0000:04:00Merci d'avance pour toute aide que vous pourriez m'apporter.
Dernière modification par manudelta (Le 04/01/2018, à 17:18)
Hors ligne
#2 Le 10/01/2018, à 23:46
- manudelta
Re : Problème sortie de veille PCI
Bonjour,
J'ai essayé de mettre le BIOS à jour, et de désactiver le lecteur de carte sd qui me paraissait fautif, mais ça n'a rien changé.
J'ai repéré quelques lignes dans dmesg qui me paraissent correspondre à des problèmes, mais je ne suis pas sûr de l'interprétation à en donner :
[ 1323.531475] usb 1-7:1.0: rebind failed: -517
[ 1323.531484] usb 1-7:1.1: rebind failed: -517
[ 1323.532638] acpi LNXPOWER:18: Turning OFFun peu plus loin
[ 1323.536604] Restarting tasks ...
[ 1323.548152] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1323.548155] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 1323.563517] [drm] PCIE GART of 3072M enabled (table at 0x0000000000040000).
[ 1323.565769] BUG: unable to handle kernel paging request at ffff998641194fecmais aussi
[ 1323.966359] thermal thermal_zone7: failed to read out thermal zone (-5)
[ 1324.245163] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.262886] r8169 0000:02:00.0 enp2s0: link down
[ 1324.262973] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.263682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not readysi ça peut aider, ci dessous un log complet de dmesg pendant un cycle mise en veille - réveil :
[ 1316.534615] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 1316.534624] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[ 1316.681765] wlp3s0: deauthenticating from 90:4d:4a:b4:67:45 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1316.689179] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 1318.360375] PM: Syncing filesystems ... done.
[ 1318.476981] PM: Preparing system for sleep (mem)
[ 1318.495129] Freezing user space processes ... (elapsed 0.171 seconds) done.
[ 1318.666320] OOM killer disabled.
[ 1318.666323] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 1318.668788] PM: Suspending system (mem)
[ 1318.668911] Suspending console(s) (use no_console_suspend to debug)
[ 1318.671106] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1318.671276] sd 0:0:0:0: [sda] Stopping disk
[ 1319.378052] PM: suspend of devices complete after 708.709 msecs
[ 1319.397645] PM: late suspend of devices complete after 19.589 msecs
[ 1319.443899] PM: noirq suspend of devices complete after 46.258 msecs
[ 1319.445144] ACPI: Preparing to enter system sleep state S3
[ 1319.450153] ACPI: EC: event blocked
[ 1319.450155] ACPI: EC: EC stopped
[ 1319.450158] PM: Saving platform NVS memory
[ 1319.450205] Disabling non-boot CPUs ...
[ 1319.467598] smpboot: CPU 1 is now offline
[ 1319.486460] IRQ 120: no longer affine to CPU2
[ 1319.486467] IRQ 121: no longer affine to CPU2
[ 1319.486471] IRQ 122: no longer affine to CPU2
[ 1319.486478] IRQ 125: no longer affine to CPU2
[ 1319.486491] IRQ 128: no longer affine to CPU2
[ 1319.486497] IRQ 131: no longer affine to CPU2
[ 1319.488776] smpboot: CPU 2 is now offline
[ 1319.510210] IRQ 1: no longer affine to CPU3
[ 1319.510224] IRQ 8: no longer affine to CPU3
[ 1319.510229] IRQ 9: no longer affine to CPU3
[ 1319.510243] IRQ 12: no longer affine to CPU3
[ 1319.511310] smpboot: CPU 3 is now offline
[ 1319.515059] ACPI: Low-level resume complete
[ 1319.515173] ACPI: EC: EC started
[ 1319.515173] PM: Restoring platform NVS memory
[ 1319.515897] Suspended for 52.403 seconds
[ 1319.515959] Enabling non-boot CPUs ...
[ 1319.516031] x86: Booting SMP configuration:
[ 1319.516032] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1319.517487] microcode: microcode updated early to revision 0xba, date = 2017-04-09
[ 1319.517702] cache: parent cpu1 should not be sleeping
[ 1319.517786] microcode: sig=0x406e3, pf=0x80, revision=0xba
[ 1319.517857] CPU1 is up
[ 1319.517882] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1319.519610] cache: parent cpu2 should not be sleeping
[ 1319.519814] CPU2 is up
[ 1319.519842] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1319.521588] cache: parent cpu3 should not be sleeping
[ 1319.521866] CPU3 is up
[ 1319.524957] ACPI: Waking up from system sleep state S3
[ 1322.127654] PM: noirq resume of devices complete after 42.383 msecs
[ 1322.133224] PM: early resume of devices complete after 5.500 msecs
[ 1322.134195] sd 0:0:0:0: [sda] Starting disk
[ 1322.151659] r8169 0000:02:00.0 enp2s0: link down
[ 1322.201248] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
[ 1322.220369] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout
[ 1322.238285] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[ 1322.240776] pciehp 0000:00:1d.0:pcie004: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
[ 1322.240777] pciehp 0000:00:1d.0:pcie004: Cannot add device at 0000:04:00
[ 1322.449590] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1322.449635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1322.449672] ata3: SATA link down (SStatus 4 SControl 300)
[ 1322.465114] ata2.00: configured for UDMA/133
[ 1322.476977] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
[ 1322.597288] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 1322.597296] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1322.598517] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 1322.598525] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1322.598664] ata1.00: configured for UDMA/133
[ 1322.737224] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[ 1322.997208] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 1323.216950] [drm] RC6 on
[ 1323.416576] ACPI: EC: event unblocked
[ 1323.530356] PM: resume of devices complete after 1397.529 msecs
[ 1323.531475] usb 1-7:1.0: rebind failed: -517
[ 1323.531484] usb 1-7:1.1: rebind failed: -517
[ 1323.532638] acpi LNXPOWER:18: Turning OFF
[ 1323.532806] acpi LNXPOWER:17: Turning OFF
[ 1323.532982] acpi LNXPOWER:16: Turning OFF
[ 1323.533140] acpi LNXPOWER:15: Turning OFF
[ 1323.533282] acpi LNXPOWER:14: Turning OFF
[ 1323.533424] acpi LNXPOWER:13: Turning OFF
[ 1323.533569] acpi LNXPOWER:12: Turning OFF
[ 1323.533710] acpi LNXPOWER:11: Turning OFF
[ 1323.533853] acpi LNXPOWER:10: Turning OFF
[ 1323.533994] acpi LNXPOWER:0f: Turning OFF
[ 1323.534136] acpi LNXPOWER:0e: Turning OFF
[ 1323.534278] acpi LNXPOWER:0d: Turning OFF
[ 1323.535336] acpi LNXPOWER:0b: Turning OFF
[ 1323.535495] acpi LNXPOWER:0a: Turning OFF
[ 1323.535640] acpi LNXPOWER:09: Turning OFF
[ 1323.535783] acpi LNXPOWER:08: Turning OFF
[ 1323.535927] acpi LNXPOWER:07: Turning OFF
[ 1323.536069] acpi LNXPOWER:06: Turning OFF
[ 1323.536212] acpi LNXPOWER:05: Turning OFF
[ 1323.536412] acpi LNXPOWER:04: Turning OFF
[ 1323.536599] PM: Finishing wakeup.
[ 1323.536602] OOM killer enabled.
[ 1323.536604] Restarting tasks ...
[ 1323.548152] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1323.548155] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 1323.563517] [drm] PCIE GART of 3072M enabled (table at 0x0000000000040000).
[ 1323.565769] BUG: unable to handle kernel paging request at ffff998641194fec
[ 1323.565858] IP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.565893] PGD 0
[ 1323.565893] P4D 0
[ 1323.565929] Oops: 0002 [#1] SMP PTI
[ 1323.565950] Modules linked in: rfcomm pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ccm bnep binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul uvcvideo crc32_pclmul snd_hda_codec_hdmi videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev ghash_clmulni_intel snd_hda_codec_conexant snd_hda_codec_generic pcbc media aesni_intel aes_x86_64 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc crypto_simd snd_soc_sst_dsp btusb btrtl btbcm btintel bluetooth glue_helper ecdh_generic snd_hda_ext_core snd_soc_sst_match cryptd arc4 snd_soc_core snd_compress intel_cstate ac97_bus iwlmvm mac80211 intel_rapl_perf snd_pcm_dmaengine snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep rtsx_pci_ms memstick snd_pcm iwlwifi joydev
[ 1323.566298] input_leds serio_raw hp_wmi snd_seq_midi snd_seq_midi_event cfg80211 wmi_bmof sparse_keymap snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore hp_accel shpchp mei_me lis3lv02d input_polldev acpi_pad tpm_infineon intel_pch_thermal mac_hid hp_wireless mei parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid amdkfd amd_iommu_v2 amdgpu rtsx_pci_sdmmc i915 psmouse ttm i2c_algo_bit drm_kms_helper syscopyarea rtsx_pci r8169 sysfillrect mii sysimgblt fb_sys_fops ahci drm libahci wmi video
[ 1323.566542] CPU: 0 PID: 3958 Comm: kworker/0:3 Tainted: G OE 4.13.0-25-generic #29-Ubuntu
[ 1323.566583] Hardware name: HP HP ProBook 470 G3/8102, BIOS N78 Ver. 01.19 10/17/2017
[ 1323.566625] Workqueue: pm pm_runtime_work
[ 1323.566647] task: ffff889f24f3df00 task.stack: ffff996a43e98000
[ 1323.566713] RIP: 0010:smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.566750] RSP: 0018:ffff996a43e9b808 EFLAGS: 00010246
[ 1323.566776] RAX: 000000000000007e RBX: ffff998641194fec RCX: 000000008003d000
[ 1323.566811] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff889febceec80
[ 1323.566844] RBP: ffff996a43e9b858 R08: ffff889feb920000 R09: 0000000000033930
[ 1323.566878] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[ 1323.566910] R13: ffff889fecb95048 R14: ffff889feb0dc000 R15: 00000000000005fe
[ 1323.566946] FS: 0000000000000000(0000) GS:ffff88a000400000(0000) knlGS:0000000000000000
[ 1323.566984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1323.567013] CR2: ffff998641194fec CR3: 00000000b280a003 CR4: 00000000003606f0
[ 1323.567047] Call Trace:
[ 1323.567103] smu7_request_smu_load_fw+0xab/0x320 [amdgpu]
[ 1323.567163] iceland_start_smu+0x39/0x70 [amdgpu]
[ 1323.567216] pp_resume+0xa9/0x120 [amdgpu]
[ 1323.567288] amdgpu_pp_resume+0x22/0x30 [amdgpu]
[ 1323.567333] amdgpu_resume_phase2+0x45/0xb0 [amdgpu]
[ 1323.567378] amdgpu_device_resume+0x13b/0x420 [amdgpu]
[ 1323.567408] ? __pci_set_master+0x34/0xe0
[ 1323.567429] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567468] amdgpu_pmops_runtime_resume+0x76/0xc0 [amdgpu]
[ 1323.567492] pci_pm_runtime_resume+0x7a/0xa0
[ 1323.567513] vga_switcheroo_runtime_resume+0x4d/0x50
[ 1323.567536] __rpm_callback+0xc4/0x200
[ 1323.567555] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567581] rpm_callback+0x24/0x80
[ 1323.567600] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567624] rpm_resume+0x4e3/0x7d0
[ 1323.567643] pm_runtime_work+0x55/0xa0
[ 1323.567663] process_one_work+0x1e7/0x410
[ 1323.567686] worker_thread+0x4b/0x420
[ 1323.567706] kthread+0x125/0x140
[ 1323.567724] ? process_one_work+0x410/0x410
[ 1323.567744] ? kthread_create_on_node+0x70/0x70
[ 1323.567768] ret_from_fork+0x1f/0x30
[ 1323.567794] Code: 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 f3 48 ab 49 8b 7d 00 89 f0 0f b6 b0 20 d0 6b c0 48 8b 07 ff 50 70 85 c0 75 42 0f b7 45 b2 <66> 44 89 23 48 c7 43 0c 00 00 00 00 66 89 43 02 48 8b 45 c0 48
[ 1323.567944] RIP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu] RSP: ffff996a43e9b808
[ 1323.567983] CR2: ffff998641194fec
[ 1323.568607] done.
[ 1323.579097] ---[ end trace 08a7897802c66d8f ]---
[ 1323.876815] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 1323.966359] thermal thermal_zone7: failed to read out thermal zone (-5)
[ 1324.245163] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.262886] r8169 0000:02:00.0 enp2s0: link down
[ 1324.262973] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.263682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1324.324672] psmouse serio3: synaptics: queried max coordinates: x [..5716], y [..4886]
[ 1324.356122] psmouse serio3: synaptics: queried min coordinates: x [1220..], y [986..]
[ 1324.373309] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1324.451718] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1328.838183] wlp3s0: authenticate with 90:4d:4a:b4:67:45
[ 1328.842152] wlp3s0: send auth to 90:4d:4a:b4:67:45 (try 1/3)
[ 1328.849666] wlp3s0: authenticated
[ 1328.850848] wlp3s0: associate with 90:4d:4a:b4:67:45 (try 1/3)
[ 1328.853832] wlp3s0: RX AssocResp from 90:4d:4a:b4:67:45 (capab=0x1511 status=0 aid=98)
[ 1328.855519] wlp3s0: associated
[ 1328.855659] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1328.951463] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 90:4d:4a:b4:67:45Hors ligne
Pages : 1