#1 Le 02/07/2017, à 16:42
- pepelinux73
Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour , j aurrai besoin de aide car cela fait 6 mois que mon Ubuntu plante chaque heure!
Car j ai installer Ubuntu que sur disque SSD 128GB
Qui pourrait me aider via une console ou ligne de commande ¿
Car je ne sais pas comment faire
Cela fait 23ans que je suis sous Ubuntu en simple user et j ai jamais été embêter autant que cela . A
Si j avais su j aurrai trouver une PC sans disque SSD car j en ai aucun besoin !
Je ne ai aucun Windows depuis plus de 20ans
J ai seul Ubuntu d installer sur disque SSD 128GB et rien sur disque HD !
J ai une Acer aspire TC710 / i5 de 2'7GHz avec 12GB Ram
Sos besoin d aide
geeko@Telegram
On m a dit d ajouter ce fichier ci-dessous pour info :
Jul 2 2017, bisnext report id 1a84f also available at https://paste.debian.net/974370/
bisnext 0.05
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-26-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: MATE 1.18.0 (Gtk 3.22.11-0ubuntu3) dm: lightdm
Distro: Ubuntu 17.04
Machine: Device: desktop Mobo: Acer model: Aspire TC-710 v: V:1.1
UEFI: American Megatrends v: R01-A2 date: 12/31/2015
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21696
clock speeds: min/max: 800/3300 MHz 1: 899 MHz 2: 899 MHz
3: 899 MHz 4: 1786 MHz
Memory: Array-1 capacity: 32 GB devices: 2 EC: None
Device-1: DIMM 1 size: 8 GB speed: 1600 MHz type: DDR3
manufacturer: SK Hynix part: HMT41GU6BFR8A-PB
Device-2: DIMM 2 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: SK Hynix part: HMT451U6BFR8A-PB
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: NVIDIA GK208 [GeForce GT 720]
bus-ID: 01:00.0 chip-ID: 10de:1288
Display Server: X.Org 1.19.3 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
Resolution: 1920x1080@60.00hz
OpenGL: renderer: Gallium 0.4 on NV106
version: 4.3 Mesa 17.0.3 (compat-v: 3.0) Direct Render: Yes
Audio: Card-1 NVIDIA GK208 HDMI/DP Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0e0f
Card-2 Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
Sound: Advanced Linux Sound Architecture v: k4.10.0-26-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Intel Wireless 3165
driver: iwlwifi bus-ID: 03:00.0 chip-ID: 8086:3165
IF: wlp3s0 state: down mac: <filter>
Drives: HDD Total Size: 661.7GB (2.3% used)
ID-1: /dev/sda model: LITEON_CV1 size: 128.0GB
temp: 0C
ID-2: /dev/sdb model: WDC_WD5000AZRZ size: 500.1GB
temp: 27C
ID-3: USB /dev/sdc model: SD/MMC/MS_PRO size: 33.6GB
temp: 0C
Optical-1: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 117G used: 12G (11%) fs: ext4 dev: /dev/sda2
label: N/A uuid: c8697d3c-615e-4eaa-80df-6b7a1286537f
ID-2: /boot/efi size: 511M used: 3.4M (1%) fs: vfat dev: /dev/sda1
label: N/A uuid: 6E67-52C9
ID-3: /media/pepe/2CC6-3339 size: 32G used: 2.4G (8%) fs: vfat dev: /dev/sdc1
label: N/A uuid: 2CC6-3339
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sdb1 size: 500.11G
fs: FAT (32 bit) label: N/A uuid: B5AE-1DE6
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 39.0
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list
deb-src http://archive.ubuntu.com/ubuntu zesty main multiverse restricted universe #Added by software-properties
deb http://ch.archive.ubuntu.com/ubuntu/ zesty main restricted
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty restricted main universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty-updates restricted main universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty universe
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb http://ch.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu zesty partner
deb-src http://archive.canonical.com/ubuntu zesty partner
deb http://security.ubuntu.com/ubuntu zesty-security main restricted
deb-src http://security.ubuntu.com/ubuntu zesty-security restricted main universe multiverse
deb http://security.ubuntu.com/ubuntu zesty-security universe
deb http://security.ubuntu.com/ubuntu zesty-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/flexiondotorg-ubuntu-telegram-zesty.list
deb http://ppa.launchpad.net/flexiondotorg/telegram/ubuntu zesty main
deb-src http://ppa.launchpad.net/flexiondotorg/telegram/ubuntu zesty main
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/skype-stable.list
deb [arch=amd64] https://repo.skype.com/deb stable main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 42.6% command: gnome-keyring-daemon pid: 1391 mem: 83.91MB (0.7%)
2: cpu: 6.8% command: chrome pid: 1767 mem: 323.09MB (2.7%)
3: cpu: 3.1% command: chrome pid: 2360 mem: 101.45MB (0.8%)
4: cpu: 2.3% command: chrome pid: 2294 mem: 284.78MB (2.3%)
5: cpu: 2.1% command: chrome pid: 2261 mem: 266.32MB (2.2%)
6: cpu: 1.4% command: chrome pid: 1827 mem: 98.43MB (0.8%)
7: cpu: 1.2% command: mate-terminal pid: 2374 mem: 42.40MB (0.3%)
8: cpu: 1.1% command: Xorg pid: 1071 mem: 63.80MB (0.5%)
9: cpu: 1.0% command: dbus-daemon pid: 1158 mem: 5.28MB (0.0%)
10: cpu: 0.9% command: chrome pid: 2210 mem: 112.85MB (0.9%)
Info: Processes: 196 Uptime: 7 min Memory: 1373.4/11959.8MB
Init: systemd v: 232 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.71 running in bash) inxi: 2.3.23
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0001,0000
Boot0000 Windows Boot Manager VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...}................
Boot0001* ubuntu HD(1,GPT,3920ed22-1076-42e2-abae-383542de0e68,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
vfat partition details:
/dev/sda1: UUID="6E67-52C9" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="3920ed22-1076-42e2-abae-383542de0e68"
/dev/sdb1: UUID="B5AE-1DE6" TYPE="vfat"
/dev/sdc1: UUID="2CC6-3339" TYPE="vfat" PARTUUID="1b74c2ea-01"
Secure Boot active
EFI files in /dev/sda1:
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
9058e551473e1efa7c7b96001c6d5fa6 /EFI/ubuntu/grubx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
__________________________________ OS prober ________________________________
None
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/ubuntu/mmx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: Syslinux 4.03 or higher
Boot sector info: Syslinux looks at sector 4961280 of /dev/sdc1 for its
second stage. It is very unlikely that Syslinux is
(still) installed. The second stage could not be
found. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /ldlinux.sys
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 119.2 GiB, 128035676160 octets, 250069680 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 250,068,991 249,018,368 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 465.8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 976,773,167 976,771,120 c W95 FAT32 (LBA)
Drive: sdc _____________________________________________________________________
Disque /dev/sdc : 31.3 GiB, 33554432000 octets, 65536000 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 160 65,535,999 65,535,840 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 6E67-52C9 vfat
/dev/sda2 c8697d3c-615e-4eaa-80df-6b7a1286537f ext4
/dev/sdb1 B5AE-1DE6 vfat
/dev/sdc1 2CC6-3339 vfat
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 jui 2 16:47 ata-HL-DT-ST_DVDRAM_GUE1N_KXJFBPA3329 -> ../../sr0
lrwxrwxrwx 1 root root 9 jui 2 16:47 ata-LITEON_CV1-8B128_KN1280L01360100C98HC -> ../../sda
lrwxrwxrwx 1 root root 10 jui 2 16:47 ata-LITEON_CV1-8B128_KN1280L01360100C98HC-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jui 2 16:47 ata-LITEON_CV1-8B128_KN1280L01360100C98HC-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 jui 2 16:47 ata-WDC_WD5000AZRZ-00HTKB0_WD-WCC4J7ZEY00P -> ../../sdb
lrwxrwxrwx 1 root root 10 jui 2 16:47 ata-WDC_WD5000AZRZ-00HTKB0_WD-WCC4J7ZEY00P-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 jui 2 16:47 usb-Generic-_SD_MMC_MS_PRO_20120926571200000-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 jui 2 16:47 usb-Generic-_SD_MMC_MS_PRO_20120926571200000-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 jui 2 16:47 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 jui 2 16:47 wwn-0x50014ee20d348831 -> ../../sdb
lrwxrwxrwx 1 root root 10 jui 2 16:47 wwn-0x50014ee20d348831-part1 -> ../../sdb1
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1 /media/pepe/2CC6-3339 vfat (ro,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)
_________________________=== Boot Files Contents ===___________________________
__________________________ sda1/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid c8697d3c-615e-4eaa-80df-6b7a1286537f root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sda2/boot/grub/grub.cfg: ___________________________
File size: 8738, Line count: 265, Menu entries (sub entries included) : 6
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file contents from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c8697d3c-615e-4eaa-80df-6b7a1286537f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 c8697d3c-615e-4eaa-80df-6b7a1286537f
else
search --no-floppy --fs-uuid --set=root c8697d3c-615e-4eaa-80df-6b7a1286537f
fi
linux /boot/vmlinuz-4.10.0-26-generic.efi.signed root=UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-26-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f / ext4 errors=remount-ro 0 1
UUID=6E67-52C9 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.10.0-26-generic.efi.signed root=UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 10.639s (firmware) + 4.907s (loader) + 2.932s (kernel) + 8.104s (userspace) = 26.584s
blame, first 10:
NetworkManager-wait-online.service 7.195s
tor@default.service 791ms
systemd-resolved.service 424ms
dev-sda2.device 418ms
networking.service 179ms
ModemManager.service 151ms
systemd-timesyncd.service 145ms
accounts-daemon.service 141ms
loadcpufreq.service 133ms
NetworkManager.service 123ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 11G 1.3G 9.6G 54M 805M 10G
Swap: 2.0G 0B 2.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 511M 3.4M 508M 1% -
/dev/sda2 / ext4 117G 12G 99G 11% 4%
/dev/sdc1 /media/pepe/2CC6-3339 vfat 32G 2.4G 29G 8% -
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
_______________________________ Modules Loaded _______________________________
Excerpt:
drm 352256 7 nouveau,ttm,drm_kms_helper
drm_kms_helper 151552 1 nouveau
i2c_algo_bit 16384 1 nouveau
mxm_wmi 16384 1 nouveau
nouveau 1601536 4
ttm 98304 1 nouveau
video 40960 1 nouveau
wmi 16384 2 mxm_wmi,nouveau
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001288sv0000174Bsd0000326Bbc03sc00i00
vendor : NVIDIA Corporation
model : GK208 [GeForce GT 720]
driver : nvidia-375 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-340 - distro non-free
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
_____________________________ Upgradable Packages _____________________________
libepoxy0 1.3.1-1ubuntu1.17.04.1 from:1.3.1-1ubuntu1
ubuntu-mate-welcome 17.04.12 from:17.04.11
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version Status
linux-generic 4.10.0.26.28 [installed]
linux-headers-4.10.0-19 4.10.0-19.21 [installed,automatic]
linux-headers-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-headers-4.10.0-26 4.10.0-26.30 [installed,automatic]
linux-headers-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-headers-generic 4.10.0.26.28 [installed]
linux-image-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-image-extra-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-extra-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-image-generic 4.10.0.26.28 [installed,automatic]
linux-signed-generic 4.10.0.26.28 [installed]
linux-signed-image-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-signed-image-generic 4.10.0.26.28 [installed,automatic]
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.021464] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[ 0.021469] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[ 0.021503] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp10) while loading table (20160930/tbxfload-228)
[ 0.028769] ACPI Error: 1 table load failures, 7 successful (20160930/tbxfload-246)
[ 0.163664] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.173593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.097818] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.159551] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 3.227581] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[ 3.228206] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[ 3.228568] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 3.228577] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 3.229629] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 3.232292] iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 3.436686] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4.194610] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 4.194615] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e8(Receiver ID)
[ 4.194617] pcieport 0000:00:1d.0: device [8086:a119] error status/mask=00000001/00002000
[ 4.194619] pcieport 0000:00:1d.0: [ 0] Receiver Error (First)
[ 6.265322] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 450.083869] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 452.544121] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 452.544134] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.922] (--) PCI:*(0:1:0:0) 10de:1288:174b:326b rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 3.932] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 3.943] (EE) Failed to load module "nvidia" (module does not exist, 0)
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-26-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-26-generic/updates/dkms
Is nouveau loaded? yes
Vendor/Device Id: 10de:1288
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "nouveau"
Found "/dev/dri/card0", driven by "nouveau"
output 0:
card0-DVI-I-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "nouveau"
last cards number = 1
Has nvidia? yes
How many cards? 1
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is mesa enabled? yes
Is mesa egl enabled? yes
Is mesa available? yes
Is mesa egl available? yes
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEON CV1-8B128
LU WWN Device Id: 0 000000 000000000
Firmware Version: G871201
User Capacity: 128'035'676'160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 2 16:55:33 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O---- 100 100 000 - 126
12 Power_Cycle_Count PO---- 100 100 000 - 546
177 Wear_Leveling_Count ------ 100 100 000 - 56887
188 Command_Timeout PO---- 100 100 000 - 27
189 Unknown_SSD_Attribute ------ 100 100 000 - 61
192 Power-Off_Retract_Count PO---- 100 100 000 - 299
232 Available_Reservd_Space PO---- 100 100 010 - 100
241 Total_LBAs_Written PO---- 100 100 000 - 56069
242 Total_LBAs_Read PO---- 100 100 000 - 37539
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AZRZ-00HTKB0
LU WWN Device Id: 5 0014ee 20d348831
Firmware Version: 01.01A01
User Capacity: 500'107'862'016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 2 16:55:33 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
3 Spin_Up_Time POS--K 139 136 021 - 4025
4 Start_Stop_Count -O--CK 100 100 000 - 310
9 Power_On_Hours -O--CK 100 100 000 - 276
12 Power_Cycle_Count -O--CK 100 100 000 - 310
192 Power-Off_Retract_Count -O--CK 200 200 000 - 167
193 Load_Cycle_Count -O--CK 200 200 000 - 454
194 Temperature_Celsius -O---K 116 104 000 - 27
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdc
# Drive sdc:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
find: ‘/media/pepe/2CC6-3339/.Trash-1000’: Erreur d'entrée/sortie
Et moi qui cherche a faire du mining Bitcoin , ether et autre , je suis bien embèter avec ce problème !!!
Merci beaucoup pour votre aide un ami LinuX
Dernière modification par pepelinux73 (Le 27/10/2017, à 00:26)
Hors ligne
#2 Le 02/07/2017, à 17:55
- ??
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour
Il n'y a rien dans ce rapport qui peut expliquer un plantage toutes les heures
Est-ce vraiment toutes les 60 minutes ou est-ce un peu aléatoire?
On va essayer de regarder dans les traces anciennes
Peux-tu donner le contenu de
tail -150 /var/log/syslog.1
tail -150 /var/log/syslog.2
D'autre part, tu as des mises à jour en attente. On ne sait jamais.... pour les installer
sudo apt update
sudo apt upgrade
Dernière modification par ?? (Le 02/07/2017, à 17:56)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#3 Le 02/07/2017, à 21:30
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour
merci de m'aider
Je dit que je plante chaque heure , mais c est simplement pour dire que je plante très souvent !!! on dirait qu il prend tous en mémoir et qu au bout d un moment il plante a cause du trop plein , tel est mon avis !
Ou si je me connecte sur la même ligne internet avec mes smartphones ou mes tablettes android , cela fait aussi planté le PC , oui très bizzard ( et le disque SSD est intégré car sinon je l'aurai déjà enlever et tirer loin ! mais impossible !)
Ensuite ,oui je suis a jour avec la 17.04 / mais les plantages ce font sous toutes les distributions et que ce soit la 12 , la 14 , 16 ou la 17.04 , rien ne change UBUNTU plante souvent ! Ubuntu est installé que sur le disque SSD 128GB !
Bon hier ou avant hier je viens de réinstaller mais cela ne change pas , je plante toujours , le PC fige !
pepe@TC-710:~$ tail -150 /var/log/syslog.1
Jul 2 06:58:06 TC-710 systemd[1166]: Started Virtual filesystem service - GNOME Online Accounts monitor.
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.service'
Jul 2 06:58:06 TC-710 systemd[1166]: Starting Virtual filesystem service - Media Transfer Protocol monitor...
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'
Jul 2 06:58:06 TC-710 systemd[1166]: Started Virtual filesystem service - Media Transfer Protocol monitor.
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Activating via systemd: service name='org.gtk.vfs.AfcVolumeMonitor' unit='gvfs-afc-volume-monitor.service'
Jul 2 06:58:06 TC-710 systemd[1166]: Starting Virtual filesystem service - Apple File Conduit monitor...
Jul 2 06:58:06 TC-710 gvfs-afc-volume-monitor[1508]: Volume monitor alive
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Successfully activated service 'org.gtk.vfs.AfcVolumeMonitor'
Jul 2 06:58:06 TC-710 systemd[1166]: Started Virtual filesystem service - Apple File Conduit monitor.
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Activating service name='org.mate.panel.applet.ClockAppletFactory'
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Activating service name='org.mate.panel.applet.NotificationAreaAppletFactory'
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Successfully activated service 'org.mate.panel.applet.ClockAppletFactory'
Jul 2 06:58:06 TC-710 dbus-daemon[1184]: Successfully activated service 'org.mate.panel.applet.NotificationAreaAppletFactory'
Jul 2 06:58:06 TC-710 dbus[866]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Jul 2 06:58:06 TC-710 systemd[1]: Starting Daemon for power management...
Jul 2 06:58:06 TC-710 ModemManager[889]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0': not supported by any plugin
Jul 2 06:58:06 TC-710 ModemManager[889]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1d.0/0000:03:00.0': not supported by any plugin
Jul 2 06:58:06 TC-710 dbus[866]: [system] Successfully activated service 'org.freedesktop.UPower'
Jul 2 06:58:06 TC-710 systemd[1]: Started Daemon for power management.
Jul 2 06:58:07 TC-710 dbus[866]: [system] Activating service name='org.mate.SettingsDaemon.DateTimeMechanism' (using servicehelper)
Jul 2 06:58:07 TC-710 dbus[866]: [system] Successfully activated service 'org.mate.SettingsDaemon.DateTimeMechanism'
Jul 2 06:58:07 TC-710 clock-applet[1563]: Negative content width -1 (allocation 1, extents 1x1) while allocating gadget (node button, owner GtkToggleButton)
Jul 2 06:58:07 TC-710 kernel: [ 6.551155] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jul 2 06:58:07 TC-710 udisksd[1472]: Mounted /dev/sdc1 at /media/pepe/2CC6-3339 on behalf of uid 1000
Jul 2 06:58:07 TC-710 kernel: [ 6.555317] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
Jul 2 06:58:07 TC-710 kernel: [ 6.555319] FAT-fs (sdc1): Filesystem has been set read-only
Jul 2 06:58:07 TC-710 dbus-daemon[1184]: Activating via systemd: service name='org.bluez.obex' unit='dbus-org.bluez.obex.service'
Jul 2 06:58:07 TC-710 dbus-daemon[1184]: Activation via systemd failed for unit 'dbus-org.bluez.obex.service': Unit dbus-org.bluez.obex.service not found.
Jul 2 06:58:07 TC-710 dbus[866]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Jul 2 06:58:07 TC-710 org.blueman.Mechanism[866]: Unable to init server: Could not connect: Connection refused
Jul 2 06:58:07 TC-710 org.blueman.Mechanism[866]: Unable to init server: Could not connect: Connection refused
Jul 2 06:58:07 TC-710 blueman-mechanism: Starting blueman-mechanism
Jul 2 06:58:07 TC-710 dbus[866]: [system] Successfully activated service 'org.blueman.Mechanism'
Jul 2 06:58:07 TC-710 blueman-mechani[1628]: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Jul 2 06:58:07 TC-710 blueman-mechanism: loading Rfcomm
Jul 2 06:58:07 TC-710 blueman-mechanism: loading Ppp
Jul 2 06:58:07 TC-710 blueman-mechanism: loading RfKill
Jul 2 06:58:07 TC-710 blueman-mechanism: loading Network
Jul 2 06:58:08 TC-710 avahi-daemon[886]: Joining mDNS multicast group on interface enp2s0.IPv6 with address fe80::1c3d:e334:f3fd:9f92.
Jul 2 06:58:08 TC-710 avahi-daemon[886]: New relevant interface enp2s0.IPv6 for mDNS.
Jul 2 06:58:08 TC-710 avahi-daemon[886]: Registering new address record for fe80::1c3d:e334:f3fd:9f92 on enp2s0.*.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 1 threads of 1 processes of 1 users.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Successfully made thread 1632 of process 1450 (n/a) owned by '1000' RT at priority 5.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 2 threads of 1 processes of 1 users.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 2 threads of 1 processes of 1 users.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Successfully made thread 1633 of process 1450 (n/a) owned by '1000' RT at priority 5.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 3 threads of 1 processes of 1 users.
Jul 2 06:58:08 TC-710 bluetoothd[859]: Endpoint registered: sender=:1.62 path=/MediaEndpoint/A2DPSource
Jul 2 06:58:08 TC-710 bluetoothd[859]: Endpoint registered: sender=:1.62 path=/MediaEndpoint/A2DPSink
Jul 2 06:58:08 TC-710 pulseaudio[1450]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Successfully made thread 1636 of process 1636 (n/a) owned by '1000' high priority at nice level -11.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 4 threads of 2 processes of 1 users.
Jul 2 06:58:08 TC-710 pulseaudio[1636]: [pulseaudio] pid.c: Daemon already running.
Jul 2 06:58:08 TC-710 kernel: [ 7.533789] Bluetooth: RFCOMM TTY layer initialized
Jul 2 06:58:08 TC-710 kernel: [ 7.533792] Bluetooth: RFCOMM socket layer initialized
Jul 2 06:58:08 TC-710 kernel: [ 7.533795] Bluetooth: RFCOMM ver 1.11
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Successfully made thread 1650 of process 1650 (n/a) owned by '1000' high priority at nice level -11.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 4 threads of 2 processes of 1 users.
Jul 2 06:58:08 TC-710 pulseaudio[1650]: [pulseaudio] pid.c: Daemon already running.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Successfully made thread 1653 of process 1653 (n/a) owned by '1000' high priority at nice level -11.
Jul 2 06:58:08 TC-710 rtkit-daemon[1451]: Supervising 4 threads of 2 processes of 1 users.
Jul 2 06:58:08 TC-710 pulseaudio[1653]: [pulseaudio] pid.c: Daemon already running.
Jul 2 06:58:08 TC-710 NetworkManager[908]: <info> [1498971488.3180] device (wlp3s0): supplicant interface state: ready -> inactive
Jul 2 06:58:08 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 06:58:09 TC-710 systemd[1]: Started Daily apt activities.
Jul 2 06:58:09 TC-710 set-cpufreq[856]: Setting powersave scheduler for all CPUs
Jul 2 06:58:10 TC-710 dhclient[1427]: DHCPDISCOVER on enp2s0 to 255.255.255.255 port 67 interval 3 (xid=0x1208ca5f)
Jul 2 06:58:10 TC-710 dhclient[1427]: DHCPREQUEST of 192.168.1.236 on enp2s0 to 255.255.255.255 port 67 (xid=0x5fca0812)
Jul 2 06:58:10 TC-710 dhclient[1427]: DHCPOFFER of 192.168.1.236 from 192.168.1.1
Jul 2 06:58:10 TC-710 dhclient[1427]: DHCPACK of 192.168.1.236 from 192.168.1.1
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): address 192.168.1.236
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): plen 24 (255.255.255.0)
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): gateway 192.168.1.1
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): server identifier 192.168.1.1
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): lease time 43200
Jul 2 06:58:10 TC-710 avahi-daemon[886]: Joining mDNS multicast group on interface enp2s0.IPv4 with address 192.168.1.236.
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0583] dhcp4 (enp2s0): hostname 'TC-710'
Jul 2 06:58:10 TC-710 avahi-daemon[886]: New relevant interface enp2s0.IPv4 for mDNS.
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0584] dhcp4 (enp2s0): nameserver '213.221.143.240'
Jul 2 06:58:10 TC-710 avahi-daemon[886]: Registering new address record for 192.168.1.236 on enp2s0.IPv4.
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0584] dhcp4 (enp2s0): nameserver '213.221.144.240'
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0584] dhcp4 (enp2s0): state changed unknown -> bound
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0624] device (enp2s0): state change: ip-config -> ip-check (reason 'none') [70 80 0]
Jul 2 06:58:10 TC-710 dhclient[1427]: bound to 192.168.1.236 -- renewal in 18256 seconds.
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0687] device (enp2s0): state change: ip-check -> secondaries (reason 'none') [80 90 0]
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0690] device (enp2s0): state change: secondaries -> activated (reason 'none') [90 100 0]
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0691] manager: NetworkManager state is now CONNECTED_LOCAL
Jul 2 06:58:10 TC-710 nm-dispatcher: req:2 'connectivity-change': new request (1 scripts)
Jul 2 06:58:10 TC-710 nm-dispatcher: req:2 'connectivity-change': start running ordered scripts...
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0744] manager: NetworkManager state is now CONNECTED_GLOBAL
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0745] policy: set 'Connexion filaire 1' (enp2s0) as default for IPv4 routing and DNS
Jul 2 06:58:10 TC-710 NetworkManager[908]: <info> [1498971490.0748] device (enp2s0): Activation: successful, device activated.
Jul 2 06:58:10 TC-710 nm-dispatcher: req:3 'up' [enp2s0]: new request (1 scripts)
Jul 2 06:58:10 TC-710 nm-dispatcher: req:3 'up' [enp2s0]: start running ordered scripts...
Jul 2 06:58:10 TC-710 whoopsie[890]: [06:58:10] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/0
Jul 2 06:58:10 TC-710 whoopsie[890]: [06:58:10] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/0
Jul 2 06:58:10 TC-710 whoopsie[890]: [06:58:10] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/0
Jul 2 06:58:10 TC-710 whoopsie[890]: [06:58:10] online
Jul 2 06:58:10 TC-710 systemd-resolved[1036]: Switching to DNS server 213.221.143.240 for interface enp2s0.
Jul 2 06:58:10 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 06:58:10 TC-710 dbus-daemon[1184]: Activating service name='org.freedesktop.Notifications'
Jul 2 06:58:10 TC-710 dbus-daemon[1184]: Successfully activated service 'org.freedesktop.Notifications'
Jul 2 06:58:10 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 06:58:10 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 06:58:11 TC-710 NetworkManager[908]: <info> [1498971491.5881] manager: startup complete
Jul 2 06:58:11 TC-710 systemd[1]: Started Network Manager Wait Online.
Jul 2 06:58:11 TC-710 systemd[1]: Reached target Network is Online.
Jul 2 06:58:11 TC-710 systemd[1]: Starting LSB: disk temperature monitoring daemon...
Jul 2 06:58:11 TC-710 systemd[1]: Started LSB: disk temperature monitoring daemon.
Jul 2 06:58:11 TC-710 systemd[1]: Reached target Multi-User System.
Jul 2 06:58:11 TC-710 systemd[1]: Reached target Graphical Interface.
Jul 2 06:58:11 TC-710 systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
Jul 2 06:58:11 TC-710 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Jul 2 06:58:11 TC-710 systemd[1]: Started Update UTMP about System Runlevel Changes.
Jul 2 06:58:11 TC-710 systemd[1]: Startup finished in 2.945s (kernel) + 8.069s (userspace) = 26.547s.
Jul 2 06:58:14 TC-710 NetworkManager[908]: <info> [1498971494.5883] manager: WiFi hardware radio set enabled
Jul 2 06:58:14 TC-710 NetworkManager[908]: <info> [1498971494.5884] manager: WWAN hardware radio set enabled
Jul 2 06:58:20 TC-710 systemd[1]: Reloading.
Jul 2 06:58:21 TC-710 dbus-daemon[1184]: Activating service name='org.gnome.GConf'
Jul 2 06:58:21 TC-710 dbus-daemon[1184]: Successfully activated service 'org.gnome.GConf'
Jul 2 06:58:21 TC-710 dbus-daemon[1184]: Activating service name='org.gnome.keyring.SystemPrompter'
Jul 2 06:58:21 TC-710 dbus-daemon[1184]: Successfully activated service 'org.gnome.keyring.SystemPrompter'
Jul 2 06:58:21 TC-710 gcr-prompter[1906]: GtkDialog mapped without a transient parent. This is discouraged.
Jul 2 06:58:22 TC-710 notification-ar[1565]: g_object_set_data: assertion 'G_IS_OBJECT (object)' failed
Jul 2 06:58:29 TC-710 systemd[1]: Starting Load/Save RF Kill Switch Status...
Jul 2 06:58:29 TC-710 systemd[1]: Started Load/Save RF Kill Switch Status.
Jul 2 06:58:30 TC-710 systemd[1]: Reloading.
Jul 2 06:58:32 TC-710 NetworkManager[908]: <info> [1498971512.5219] device (wlp3s0): supplicant interface state: inactive -> scanning
Jul 2 06:58:32 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 06:58:34 TC-710 systemd-timesyncd[674]: Synchronized to time server 91.189.91.157:123 (ntp.ubuntu.com).
Jul 2 06:58:37 TC-710 blueman-mechanism: Exiting
Jul 2 06:59:15 TC-710 systemd[1]: Starting Stop ureadahead data collection...
Jul 2 06:59:15 TC-710 systemd[1]: Started Stop ureadahead data collection.
Jul 2 07:00:43 TC-710 notification-ar[1565]: Status Notifier Item with bus name ':1.27' and object path '/org/ayatana/NotificationItem/nm_applet' is already registered
Jul 2 07:03:04 TC-710 anacron[855]: Job `cron.daily' started
Jul 2 07:03:04 TC-710 anacron[2515]: Updated timestamp for job `cron.daily' to 2017-07-02
Jul 2 07:03:04 TC-710 cracklib: no dictionary update necessary.
Jul 2 07:03:04 TC-710 systemd[1]: Stopping Make remote CUPS printers available locally...
Jul 2 07:03:04 TC-710 systemd[1]: Stopped Make remote CUPS printers available locally.
Jul 2 07:03:04 TC-710 systemd[1]: Stopping CUPS Scheduler...
Jul 2 07:03:04 TC-710 systemd[1]: Stopped CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Closed CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Stopping CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Listening on CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Stopped CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Stopping CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Started CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Started CUPS Scheduler.
Jul 2 07:03:04 TC-710 systemd[1]: Started Make remote CUPS printers available locally.
pepe@TC-710:~$ tail -150 /var/log/syslog.2
tail: impossible d'ouvrir '/var/log/syslog.2' en lecture: Aucun fichier ou dossier de ce type
pepe@TC-710:~$
Encore mille merci de m aider l'ami
Dernière modification par pepelinux73 (Le 02/07/2017, à 21:34)
Hors ligne
#4 Le 02/07/2017, à 21:58
- ??
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonsoir
Tu as dis quelque chose de contradictoire dans ton dernier message le pc fige. Merci de dire s'il plante ou s'il ne répond plus que tu perds la main et que tu dois faire power off pour t'en sortir.....
J'étais parti sur l'idée d'un plantage avec des recherches dans les fichiers de traces.
Je serais plutôt maintenant en train de partir sur l'idée qu'il ne répond plus. Les outils à mettre sont alors préventifs.
C'est essentiellement le suivi de la mémoire et du processeur
Si tu dis que le problème est aussi survenu avec la version 12.04.... je ne sais trop quoi penser.
Mais en premier, je vais te demander de tester la RAM
Je pense qu'au boot, tu dois avoir une entrée te proposant de lancer un test mémoire.
et surtout qu'on pourra trouver quelque chose sans que cela traîne 3 mois ou plus
Dernière modification par ?? (Le 03/07/2017, à 09:59)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#5 Le 03/07/2017, à 05:51
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Re,
Quel malentendu ?
Le PC plante ¡ Donc au bout d une moment d utilisation le PC plante , il ce fige , je veux dire que plus rien ne fonctionne et j'appluie longtemps sur On/Off pour qu'il s'eteine puis je le rallume
A tu compris ?
Je le reboot par on/Off au moins 10-15x par jour !
J'espère avoir répondu a ta question ?
Puis quel test veux tu que je fasse ? Ligne de commande ?
Cette Tour Acer aspire TC710 est neuve , elle a a peine 6 mois que je l'ai acheté !
Je n ai plus de Windows 10! Ha au début j'ai employé Windows 10 pour tester et j avais essayé le mining avec minergate , le mining fonctionner très bien , aucun plantage et de plus je pouvez mining en cours et surtout en GPU , sous Windows ( car sous Linux je peux mining juste avec les cours et pas mining avec carte graphique , GPU , car pas pilote d'origine pour GeForce GT720 2GB sous Ubuntu ! Mais bref ceci est une autre problème
Et cela ne me a pas empêché de formater Windows 10 et de garder juste LinuX
Merci , a plus tard , Pascal
Et OUI le problème est toujours la sous ubuntu-gnome , Ubuntu , Lubuntu,.. 14, 16, 17.04 , sous tous les linux.deb que j ai testé , toujours ce problème avec mon disque SSD intègré ¡!
( minergate.deb n'est plus installer sur le PC , puisque j'ai re installe Ubuntu , le Système d'exploitation est propre et d'origine ! )
Dernière modification par pepelinux73 (Le 03/07/2017, à 06:00)
Hors ligne
#6 Le 03/07/2017, à 08:18
- malbo
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour,
Je crois que tu fais erreur en supposant que tes soucis de plantage sont dus à ton SSD. Dans la partie "Disks SMART Attributes" du rapport Bisnext que tu as collé dans ton post #1, on peut voir qu'il s'agit du modèle CV1-8B128 du fabricant LITE-ON (on peut voir ce modèle sur cette page). J'ai fait une recherche des occurrences de "CV1-8B128" sur le forum ubuntu-fr.org et j'ai trouvé ces résultats : ici et là
Dans ces deux cas, on voit que le noyau linux 4.4.0-x (le noyau qui équipe Ubuntu 16.04) sait déjà bien gérer ce modèle de SSD. Je n'ai aucune raison de croire que Ubuntu 17.04 ne saurait pas gérer ce modèle de SSD.
Tu ferais bien de soupçonner la partie gestion de l'affichage plutôt que de soupçonner le SSD. Tu devrais t'inspirer de cette discussion créée par Spectre Visible dans laquelle il est question de la même carte graphique que la tienne : https://forum.ubuntu-fr.org/viewtopic.php?id=2007671
Ce qu'il faut retenir : il faut désactiver en priorité "Secure Boot" dans ton "Bios". Spectre Visible n'avait pas cru bon de le faire et il s'est retrouvé rapidement dans la mouise (son post #3 : "Il fallait bien désactiver le "Secure Boot" dans le BIOS avant de lancer Ubuntu."
Ensuite, il faut installer le pilote propriétaire nvidia-375 (fais-le en mode graphique : paramètres système → Logiciels & mises à jour → onglet "Pilotes additionnels"). On peut voir que ce pilote t'est conseillé dans cet extrait du rapport Bisnext :
-------------------------------------------------------------------------------------------------------------------------------------------
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001288sv0000174Bsd0000326Bbc03sc00i00
vendor : NVIDIA Corporation
model : GK208 [GeForce GT 720]
driver : nvidia-375 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-340 - distro non-free
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
-----------------------------------------------------------------------------------------------------------------------------------------------
Dernière modification par malbo (Le 03/07/2017, à 08:48)
Hors ligne
#7 Le 04/07/2017, à 04:52
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Super Grand merci pour ta patience et ton aide , Vraiment MERCI
Donc la solution est que j'ai dans le BIOS et que je désactive Secure Boot !?
Ensuite tu me dit de changer mon driver de carte graphique ?
Mais cela c'est pour le Mining , Oui? Non ?
Demain , enfin plutôt dans la journée je reviendrai bien étudier ton message , car la j'aller plutôt me coucher, et j ai juste lit ton message! mais quand j ai vu l'aide que tu me aporte , j êtes obligé de poster petit message de remerciement. Je viendrai travailler plus tard. Mille merci l ami
Hors ligne
#8 Le 04/07/2017, à 06:35
- malbo
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Je te propose d'utiliser le pilote propriétaire nvidia-375 parce que je pense que ça évitera le plantage. Je ne propose pas ça pour le Mining en particulier (je ne connais pas ce sujet)
Hors ligne
#9 Le 07/07/2017, à 08:49
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
re Bonjour , Alors cela fait quelque jour que j emploi Ubuntu et que je ne plante presque plus.
ou il plante très , très rarement au bout d un très long moment - car je travail toujours avec beaucoup de page web ouverte et aussi beaucoup de programme en même tant. depuis 3 jours je n'est planté que 2 x / vraiment acceptable
Ou il plante le plus c est avec chrome et chromium (les deux navigateur sont instalé ) quand suis sur 1 page Facebook et que je poste un message !! ( planté 3 x ce matin en essayant de poster message sur ma page faceBook!)
J'ai juste débranché le secure Boot !
Bon je n ai pas re essayer le mining!
Mais va quand même beaucoup mieux
Enfin , je vous remercie !
Salutation
Ubuntu Mate 17.04
Dernière modification par pepelinux73 (Le 07/07/2017, à 09:20)
Hors ligne
#10 Le 07/07/2017, à 09:42
- malbo
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Mais pourquoi n'installes-tu pas le pilote propriétaire nvidia-375 ? Je t'ai pourtant détaillé comment faire dans le post #6.
Hors ligne
#11 Le 07/07/2017, à 17:37
- Compte anonymisé
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
@ malbo il y a le swap fil qui coince un peu aussi il y'a l'aire ci je ne dit pas de bêtises
#12 Le 08/07/2017, à 00:22
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonsoir
Alors je viens de le faire , changer le Pilote mit par défaut pour Nvidia GeForce GT-720 (2GB)
Donc je verrai ces prochains jour si il plante moi et je vais re télécharger minergate.deb pour voir si je peux mining en GPU avec ce nouveau Driver ! Car normalement je pouvez juste mining avec mes CPU et non les GPU , bref
Merci et Salutation , Pascal
ps: dommage que pour mining BTC , ether et autres car les explications sont qu'en anglais !!! j aurai aimer trouver un programme pour mining en Français. LE Mining via GPU est toujours impossible avec minergate.deb !!! Mais cela est 1 autre problème !
Dernière modification par pepelinux73 (Le 08/07/2017, à 01:14)
Hors ligne
#13 Le 08/07/2017, à 07:13
- malbo
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour,
Je te prie de refaire un rapport Bisnext depuis une session de ton Ubuntu installé afin que je puisse comparer avec celui du début (le rapport que tu as collé dans ton post #1)
Dernière modification par malbo (Le 08/07/2017, à 07:14)
Hors ligne
#14 Le 14/07/2017, à 05:46
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour a tous
et merci malbo
Je suis content car je ne plante presque plus !!!! EXCELLENT , bon je n'ai pas encore changer mon driver , je le ferai surement , simple dans gestionnaire mise a jour , paramêtre , dernier onglet choisir les driver pour carte graphique !
Et suis content car j ai re installer minergate.deb (non officiel!) mais je mining avec mes 4 CPU a 320 kH/s pour ether et il ne plante plus , je ne peux pas mining en GPU ( cause pas le driver Nvidia de windows !),
je peux laisser tourner mon PC jour et nuit sans qu il plante , là ça fait plusierus jour qui tourne non stop, excellent ( minergate.deb et le seul mining que j ai réusi a installer , car il y a bien sudo apt-get ether... ou ethos mais tous en anglais et ne comprend pas) , bref
je te re colle le rapport
Jul 14 2017, bisnext report id 72325 also available at https://paste.debian.net/976437/
bisnext 0.05
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-26-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: MATE 1.18.0 (Gtk 3.22.11-0ubuntu3) dm: lightdm
Distro: Ubuntu 17.04
Machine: Device: desktop Mobo: Acer model: Aspire TC-710 v: V:1.1
UEFI: American Megatrends v: R01-A2 date: 12/31/2015
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21696
clock speeds: min/max: 800/3300 MHz 1: 2299 MHz 2: 2299 MHz
3: 2299 MHz 4: 2299 MHz
Memory: Array-1 capacity: 32 GB devices: 2 EC: None
Device-1: DIMM 1 size: 8 GB speed: 1600 MHz type: DDR3
manufacturer: SK Hynix part: HMT41GU6BFR8A-PB
Device-2: DIMM 2 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: SK Hynix part: HMT451U6BFR8A-PB
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: NVIDIA GK208 [GeForce GT 720]
bus-ID: 01:00.0 chip-ID: 10de:1288
Display Server: X.Org 1.19.3 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
Resolution: 1920x1080@60.00hz
OpenGL: renderer: GeForce GT 720/PCIe/SSE2
version: 4.5.0 NVIDIA 375.66 Direct Render: Yes
Audio: Card-1 NVIDIA GK208 HDMI/DP Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0e0f
Card-2 Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
Sound: Advanced Linux Sound Architecture v: k4.10.0-26-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Intel Wireless 3165
driver: iwlwifi bus-ID: 03:00.0 chip-ID: 8086:3165
IF: wlp3s0 state: down mac: <filter>
Drives: HDD Total Size: 628.1GB (3.3% used)
ID-1: /dev/sda model: LITEON_CV1 size: 128.0GB
temp: 0C
ID-2: /dev/sdb model: WDC_WD5000AZRZ size: 500.1GB
temp: 39C
Optical-1: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 117G used: 20G (18%) fs: ext4 dev: /dev/sda2
label: N/A uuid: c8697d3c-615e-4eaa-80df-6b7a1286537f
ID-2: /boot/efi size: 511M used: 3.4M (1%) fs: vfat dev: /dev/sda1
label: N/A uuid: 6E67-52C9
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sdb1 size: 500.11G
fs: FAT (32 bit) label: N/A uuid: B5AE-1DE6
Sensors: System Temperatures: cpu: 53.0C mobo: 29.8C gpu: 0.0:47C
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list
deb-src http://archive.ubuntu.com/ubuntu zesty main multiverse restricted universe #Added by software-properties
deb http://ch.archive.ubuntu.com/ubuntu/ zesty main restricted
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty restricted main universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty-updates restricted main universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty universe
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb http://ch.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb-src http://ch.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu zesty partner
deb-src http://archive.canonical.com/ubuntu zesty partner
deb http://security.ubuntu.com/ubuntu zesty-security main restricted
deb-src http://security.ubuntu.com/ubuntu zesty-security restricted main universe multiverse
deb http://security.ubuntu.com/ubuntu zesty-security universe
deb http://security.ubuntu.com/ubuntu zesty-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/flexiondotorg-ubuntu-telegram-zesty.list
deb http://ppa.launchpad.net/flexiondotorg/telegram/ubuntu zesty main
deb-src http://ppa.launchpad.net/flexiondotorg/telegram/ubuntu zesty main
Active apt sources in file: /etc/apt/sources.list.d/gezakovacs-ubuntu-ppa-zesty.list
deb http://ppa.launchpad.net/gezakovacs/ppa/ubuntu zesty main
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/skype-stable.list
deb [arch=amd64] https://repo.skype.com/deb stable main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 369% command: minergate pid: 1545 mem: 2230.59MB (18.6%)
2: cpu: 5.5% command: chrome pid: 2132 mem: 317.11MB (2.6%)
3: cpu: 2.2% command: chrome pid: 1612 mem: 384.13MB (3.2%)
4: cpu: 2.0% command: chromium-browser pid: 32255 mem: 468.31MB (3.9%)
5: cpu: 2.0% command: chrome pid: 2998 mem: 106.30MB (0.8%)
6: cpu: 1.5% command: chrome pid: 3040 mem: 100.55MB (0.8%)
7: cpu: 1.3% command: chrome pid: 4766 mem: 201.00MB (1.6%)
8: cpu: 1.2% command: mate-terminal pid: 3058 mem: 40.16MB (0.3%)
9: cpu: 0.8% command: Xorg pid: 1090 mem: 90.66MB (0.7%)
10: cpu: 0.6% command: chrome pid: 1871 mem: 852.74MB (7.1%)
Info: Processes: 239 Uptime: 1 day Memory: 4238.8/11959.0MB
Init: systemd v: 232 runlevel: 5 Gcc sys: 6.3.0
Client: Shell (bash 4.4.71 running in bash) inxi: 2.3.23
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0001,0000
Boot0000 Windows Boot Manager VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...}................
Boot0001* ubuntu HD(1,GPT,3920ed22-1076-42e2-abae-383542de0e68,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
vfat partition details:
/dev/sda1: UUID="6E67-52C9" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="3920ed22-1076-42e2-abae-383542de0e68"
/dev/sdb1: UUID="B5AE-1DE6" TYPE="vfat"
Secure Boot disabled or not available on this system.
EFI files in /dev/sda1:
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
9058e551473e1efa7c7b96001c6d5fa6 /EFI/ubuntu/grubx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
__________________________________ OS prober ________________________________
None
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/ubuntu/mmx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 119.2 GiB, 128035676160 octets, 250069680 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 250,068,991 249,018,368 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 465.8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 976,773,167 976,771,120 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 6E67-52C9 vfat
/dev/sda2 c8697d3c-615e-4eaa-80df-6b7a1286537f ext4
/dev/sdb1 B5AE-1DE6 vfat
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 jui 12 16:12 ata-HL-DT-ST_DVDRAM_GUE1N_KXJFBPA3329 -> ../../sr0
lrwxrwxrwx 1 root root 9 jui 12 16:12 ata-LITEON_CV1-8B128_KN1280L01360100C98HC -> ../../sda
lrwxrwxrwx 1 root root 10 jui 12 16:12 ata-LITEON_CV1-8B128_KN1280L01360100C98HC-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jui 12 16:12 ata-LITEON_CV1-8B128_KN1280L01360100C98HC-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 jui 12 16:12 ata-WDC_WD5000AZRZ-00HTKB0_WD-WCC4J7ZEY00P -> ../../sdb
lrwxrwxrwx 1 root root 10 jui 12 16:12 ata-WDC_WD5000AZRZ-00HTKB0_WD-WCC4J7ZEY00P-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 jui 13 09:17 usb-Generic-_SD_MMC_MS_PRO_20120926571200000-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 jui 12 16:12 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 jui 12 16:12 wwn-0x50014ee20d348831 -> ../../sdb
lrwxrwxrwx 1 root root 10 jui 12 16:12 wwn-0x50014ee20d348831-part1 -> ../../sdb1
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
_________________________=== Boot Files Contents ===___________________________
__________________________ sda1/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid c8697d3c-615e-4eaa-80df-6b7a1286537f root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sda2/boot/grub/grub.cfg: ___________________________
File size: 8738, Line count: 265, Menu entries (sub entries included) : 6
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file contents from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c8697d3c-615e-4eaa-80df-6b7a1286537f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 c8697d3c-615e-4eaa-80df-6b7a1286537f
else
search --no-floppy --fs-uuid --set=root c8697d3c-615e-4eaa-80df-6b7a1286537f
fi
linux /boot/vmlinuz-4.10.0-26-generic.efi.signed root=UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-26-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f / ext4 errors=remount-ro 0 1
UUID=6E67-52C9 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
_________ Devices which don't seem to have a corresponding hard drive: _________
sdc
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.10.0-26-generic.efi.signed root=UUID=c8697d3c-615e-4eaa-80df-6b7a1286537f ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 10.546s (firmware) + 4.842s (loader) + 1.888s (kernel) + 8.127s (userspace) = 25.404s
blame, first 10:
NetworkManager-wait-online.service 7.056s
tor@default.service 962ms
apt-daily.service 646ms
dev-sda2.device 575ms
systemd-resolved.service 518ms
motd-news.service 313ms
systemd-rfkill.service 270ms
packagekit.service 187ms
systemd-timesyncd.service 103ms
networking.service 99ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 11G 4.0G 1.2G 190M 6.4G 7.2G
Swap: 2.0G 0B 2.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 511M 3.4M 508M 1% -
/dev/sda2 / ext4 117G 20G 92G 18% 4%
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
_______________________________ Modules Loaded _______________________________
Excerpt:
drm 352256 4 nvidia_drm,drm_kms_helper
drm_kms_helper 151552 1 nvidia_drm
nvidia 12304384 149 nvidia_modeset,nvidia_uvm
nvidia_drm 45056 1
nvidia_modeset 790528 5 nvidia_drm
nvidia_uvm 647168 4
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd00001288sv0000174Bsd0000326Bbc03sc00i00
model : GK208 [GeForce GT 720]
vendor : NVIDIA Corporation
driver : nvidia-340 - distro non-free
driver : nvidia-375 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
_____________________________ Upgradable Packages _____________________________
apport 2.20.4-0ubuntu4.4 from:2.20.4-0ubuntu4.1
apport-gtk 2.20.4-0ubuntu4.4 from:2.20.4-0ubuntu4.1
intel-microcode 3.20170511.1~ubuntu17.04.0 from:3.20161104.1
python3-apport 2.20.4-0ubuntu4.4 from:2.20.4-0ubuntu4.1
python3-problem-report 2.20.4-0ubuntu4.4 from:2.20.4-0ubuntu4.1
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version Status
linux-generic 4.10.0.26.28 [installed]
linux-headers-4.10.0-19 4.10.0-19.21 [installed,automatic]
linux-headers-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-headers-4.10.0-26 4.10.0-26.30 [installed,automatic]
linux-headers-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-headers-generic 4.10.0.26.28 [installed]
linux-image-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-image-extra-4.10.0-19-generic 4.10.0-19.21 [installed,automatic]
linux-image-extra-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-image-generic 4.10.0.26.28 [installed,automatic]
linux-signed-generic 4.10.0.26.28 [installed]
linux-signed-image-4.10.0-26-generic 4.10.0-26.30 [installed,automatic]
linux-signed-image-generic 4.10.0.26.28 [installed,automatic]
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.022014] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[ 0.022019] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[ 0.022052] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp10) while loading table (20160930/tbxfload-228)
[ 0.029387] ACPI Error: 1 table load failures, 7 successful (20160930/tbxfload-246)
[ 0.166212] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.176276] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.040688] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.063635] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.123081] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 2.193114] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[ 2.193223] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[ 2.193336] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 2.193343] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 2.197290] iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 2.407039] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 2.673826] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 6.747723] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[12201.101271] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[12201.101278] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e8(Receiver ID)
[12201.101281] pcieport 0000:00:1d.0: device [8086:a119] error status/mask=00000001/00002000
[12201.101283] pcieport 0000:00:1d.0: [ 0] Receiver Error (First)
[16107.100370] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[16107.100381] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e8(Receiver ID)
[16107.100384] pcieport 0000:00:1d.0: device [8086:a119] error status/mask=00000001/00002000
[16107.100386] pcieport 0000:00:1d.0: [ 0] Receiver Error (First)
[56064.284236] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[56064.284249] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e8(Receiver ID)
[56064.284252] pcieport 0000:00:1d.0: device [8086:a119] error status/mask=00000001/00002000
[56064.284254] pcieport 0000:00:1d.0: [ 0] Receiver Error (First)
[57643.187509] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[59595.283316] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[59595.283322] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e8(Receiver ID)
[59595.283326] pcieport 0000:00:1d.0: device [8086:a119] error status/mask=00000001/00002000
[59595.283328] pcieport 0000:00:1d.0: [ 0] Receiver Error (First)
[61447.602312] FAT-fs (sdc1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.026] (--) PCI:*(0:1:0:0) 10de:1288:174b:326b rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-26-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-26-generic/updates/dkms
Found nvidia module: nvidia_375_modeset.ko
Is nvidia loaded? yes
Is nouveau blacklisted? yes
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:1288
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
last cards number = 1
Has nvidia? yes
How many cards? 1
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is nvidia available? yes
Is mesa available? yes
Is mesa egl available? yes
Is prime available? yes
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
Nvidia packages and kernel modules:
nvidia-375 375.66-0ubuntu0.17.04.1
nvidia-opencl-icd-375 375.66-0ubuntu0.17.04.1
nvidia-prime 0.8.4
nvidia-settings 367.35-0ubuntu1
bbswitch-dkms 0.8-4ubuntu1
Apr 6 18:28 /lib/modules/4.10.0-19-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jun 26 18:09 /lib/modules/4.10.0-26-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Jul 7 23:59 /lib/modules/4.10.0-26-generic/updates/dkms/nvidia_375.ko
Jul 7 23:59 /lib/modules/4.10.0-26-generic/updates/dkms/nvidia_375_drm.ko
Jul 7 23:59 /lib/modules/4.10.0-26-generic/updates/dkms/nvidia_375_modeset.ko
Jul 7 23:59 /lib/modules/4.10.0-26-generic/updates/dkms/nvidia_375_uvm.ko
Jul 7 23:59 /lib/nvidia-375
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEON CV1-8B128
LU WWN Device Id: 0 000000 000000000
Firmware Version: G871201
User Capacity: 128'035'676'160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jul 14 05:37:12 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O---- 100 100 000 - 143
12 Power_Cycle_Count PO---- 100 100 000 - 563
177 Wear_Leveling_Count ------ 100 100 000 - 57702
188 Command_Timeout PO---- 100 100 000 - 27
189 Unknown_SSD_Attribute ------ 100 100 000 - 62
192 Power-Off_Retract_Count PO---- 100 100 000 - 307
232 Available_Reservd_Space PO---- 100 100 010 - 100
241 Total_LBAs_Written PO---- 100 100 000 - 57253
242 Total_LBAs_Read PO---- 100 100 000 - 38687
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AZRZ-00HTKB0
LU WWN Device Id: 5 0014ee 20d348831
Firmware Version: 01.01A01
User Capacity: 500'107'862'016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jul 14 05:37:12 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
3 Spin_Up_Time POS--K 137 136 021 - 4125
4 Start_Stop_Count -O--CK 100 100 000 - 327
9 Power_On_Hours -O--CK 100 100 000 - 369
12 Power_Cycle_Count -O--CK 100 100 000 - 327
192 Power-Off_Retract_Count -O--CK 200 200 000 - 175
193 Load_Cycle_Count -O--CK 200 200 000 - 473
194 Temperature_Celsius -O---K 105 104 000 - 38
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdc
# Drive sdc:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-26-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Simplement décoché dans le bios de secure disque !
Salutation et merci
ps: j'ai toujour Ubuntu d installer que sur mon SSD et rien sur le HD , car jamais compris les commande a rentrer pour mettre les partitions ou ça écris beaucoup sur mon HD, mais pas grave pour l instant ! Tant que ça tourne
Dernière modification par pepelinux73 (Le 14/07/2017, à 05:49)
Hors ligne
#15 Le 14/07/2017, à 06:25
- malbo
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Bonjour,
Dans le rapport Bisnext de ton dernier post, on peut voir dans le partie "Graphics" (vers le début du rapport) que c'est bien le driver NVIDIA qui est utilisé et que le driver NOUVEAU n'est pas utilisé :
Display Server: X.Org 1.19.3 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
A comparer avec ce qu'il y avait au même endroit dans le rapport Bisnext du post #1 (on peut voir que c'était le driver NOUVEAU qui était utilisé) :
Display Server: X.Org 1.19.3 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
Je suis très content que ton fonctionnement se soit amélioré grâce au driver NVIDIA.
On peut voir également que tu as désactivé "Secure Boot" et c'est bien ce qu'il fallait faire pour éviter les ennuis avec le pilote NVIDIA :
Secure Boot disabled or not available on this system.
Je te prie de passer la présente discussion en "Résolu" en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] Installation d'Ubuntu sur PC avec disque SSD et HD , SoS !
Dernière modification par malbo (Le 14/07/2017, à 06:37)
Hors ligne
#16 Le 26/10/2017, à 17:47
- pepelinux73
Re : Installation d'Ubuntu sur PC avec disque SSD et HD ,[résolu]
Re bonjour
comme j'ai planté sous ubuntu 17.10 et que le mining va trop lentement , j'ai réinstaller ubuntu 16.04.3 avec varite de mettre le HD en fonction
Mais bref , je plante beaucoup avec le mining , donc j'essaie de mettre driver nvidia 340 , même si je mining pas le GPU mais que CPU ! car le programme n'est pas a jour pour 16.xx ! , mais la dernier X c'est cela qui m'a permit de ne plus planté
quand au bios , je pense pas qu il ce sois changer en réinstallant ubuntu
je vais voir et je reviens faire mon rapport avant de clore le sujet
Merci
Hors ligne