Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/05/2017, à 09:49

fatju

Serveur SAMBA

Bonjour

J’essaye de faire un petit réseau SAMBA. j'ai partitionner un disque dur 1To en 2 partitions de 500Go ext4. j'arrive à les voir dans windows 7 mais je n'arrive pas à y accerder.
Mais là je bloque, donc je fais appel à vos connaissance pour m'aider à trouvé où j'ai fais une erreur.

je suis sous ubuntu 16.04 LTS

voilà mon fihcier /etc/samba/smb.conf

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 enp63s0 192.168.0.28

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
	server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes
	username map = /etc/samba/smbusers
	security = user
;	encrypt passwords = yes
	guest ok = yes
;	guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = doume

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

;	wins support = no
[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @reseau

[DDserveur1]
	path = /media/ju/cc794f3e-ea5c-4d23-8cc6-74ad44a72272

;	browseable = yes
	guest ok = yes

;	available = yes
	writable = yes
[DDserveur2]
	comment = DDserveur2
	path = /media/ju/67d3fb7f-d437-4481-9cf1-d127020f2eec

;	browseable = yes
	guest ok = yes
;	available = yes
	writable = yes

voilà le résultat de  testparm -s

testparm -s
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Processing section "[DDserveur1]"
Processing section "[DDserveur2]"
Loaded services file OK.
Server role: ROLE_STANDALONE

# Global parameters
[global]
	server string = %h server (Samba, Ubuntu)
	server role = standalone server
	security = USER
	map to guest = Bad User
	obey pam restrictions = Yes
	pam password change = Yes
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	username map = /etc/samba/smbusers
	unix password sync = Yes
	syslog = 0
	log file = /var/log/samba/log.%m
	max log size = 1000
	dns proxy = No
	usershare allow guests = Yes
	panic action = /usr/share/samba/panic-action %d
	idmap config * : backend = tdb
	guest ok = Yes


[printers]
	comment = All Printers
	path = /var/spool/samba
	create mask = 0700
	printable = Yes
	browseable = No


[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers


[DDserveur1]
	path = /media/ju/cc794f3e-ea5c-4d23-8cc6-74ad44a72272
	read only = No


[DDserveur2]
	comment = DDserveur2
	path = /media/ju/67d3fb7f-d437-4481-9cf1-d127020f2eec
	read only = No

et voilà ce que j'ai dans windows 7
http://www.cjoint.com/data/GExiUbM1AYW_reseau.JPG

voilà j'espère que j'ai rien oublié
merci


Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix et hostingpics le permettent).

Dernière modification par cqfd93 (Le 26/05/2017, à 16:30)

Hors ligne

#2 Le 23/05/2017, à 16:37

ikoula

Re : Serveur SAMBA

Bonjour,

En fait oui tu as oublié d'indiquer ce qu'il se passe quand tu essayes d'ouvrir tes partages hmm

Et si ce n'est pas déjà fait je te recommande la documentation disponible ici https://doc.ubuntu-fr.org/samba

Dernière modification par ikoula (Le 23/05/2017, à 16:40)


Thomas | Community manager | ikoula Serveurs dédiés, VPS et Cloud Public
Contactez-nous | Suivez-nous sur Twitter | Likez nous sur Facebook

Hors ligne

#3 Le 23/05/2017, à 16:43

fatju

Re : Serveur SAMBA

bonjour,

ben y se passait, que windows me marquait qu'il ne pouvait pas acceder aux fichiers.
mais j'ai modifier le nom des disques dur et ça a l'ai de fonctionner.
je viens juste de débloquer le truc donc je vois si ça fonctionne vraiment.

merci

Hors ligne

#4 Le 26/05/2017, à 16:22

fatju

Re : Serveur SAMBA

rebonjour,
bon dans le genre le mieux est l'ennemi du bien, après avoir bidouiller pas mal de truc, je vous épargne les détails.
Ben ça marche plus.
bien sur j'ai lu les docs sur le site à propos de samba, sinon je n'oserai pas sollicité votre sagacité.
donc je remet les infos que j'ai :
le  fichier /etc/samba/smb.conf

# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 enp63s0 192.168.0.28

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
	server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes
	username map = /etc/samba/smbusers
	security = user
;	encrypt passwords = yes
;	guest ok = yes
;	guest account = nobody
;	guest ok = no

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = doume, tel, portable

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = yes
;   create mask = 0770
;   directory mask = 0777


;	wins support = no

[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = 
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @reseau

[DDserveur1]
	path = /media/ju/DDserveur1
	writeable = yes
;	browseable = yes
	valid users = doume, portable, tel

[DDserveur2]
	path = /media/ju/DDserveur2
	writeable = yes
;	browseable = yes
	valid users = doume, portable, tel 

le résultat de testparm -s

~$ testparm -s
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated
Processing section "[printers]"
Processing section "[print$]"
Processing section "[DDserveur1]"
Processing section "[DDserveur2]"
Loaded services file OK.
Server role: ROLE_STANDALONE

# Global parameters
[global]
	server string = %h server (Samba, Ubuntu)
	server role = standalone server
	security = USER
	map to guest = Bad User
	obey pam restrictions = Yes
	pam password change = Yes
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	username map = /etc/samba/smbusers
	unix password sync = Yes
	syslog = 0
	log file = /var/log/samba/log.%m
	max log size = 1000
	dns proxy = No
	usershare allow guests = Yes
	panic action = /usr/share/samba/panic-action %d
	idmap config * : backend = tdb


[printers]
	comment = All Printers
	path = /var/spool/samba
	create mask = 0700
	printable = Yes
	browseable = No


[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers


[DDserveur1]
	path = /media/ju/DDserveur1
	valid users = doume portable tel
	read only = No


[DDserveur2]
	path = /media/ju/DDserveur2
	valid users = doume portable tel
	read only = No

ce que donne windows7

http://www.cjoint.com/data/GExiUbM1AYW_reseau.JPG

ensuite j'ai ça jusque là je me dis c'est bon

http://www.cjoint.com/data/GEApsixh0rW_reseau2.JPG

et là je rentre les identifiant et le mdp et ça marche pas j'ai ça

http://www.cjoint.com/doc/17_05/GEApvfFKwIW_reseau3.JPG

voilà je vous remercie d'avance


Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix et hostingpics le permettent).

Dernière modification par cqfd93 (Le 26/05/2017, à 16:32)

Hors ligne

#5 Le 29/05/2017, à 16:38

fatju

Re : Serveur SAMBA

quelqu'un peu me filer un coup de main.
merci

Hors ligne

#6 Le 29/05/2017, à 16:47

Nasman

Re : Serveur SAMBA

Je ne sais pas si c'est la source de l'erreur mais depuis Windows tu as le domaine DOUMÉ-PC et tu as renseigné WORKGROUP dans la configuration de samba.


PC fixe sous Bionic 64 bits et portable avec Focal 64 bits

Hors ligne