#1 Le 18/05/2017, à 17:38
- EL-hadad
Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Salut par ici!
Desolé de ce derangement, j'aimerais que vous m'aidiez à retrouver mon windows 10 que j'ai perdu en commettant une grave erreur
Au fait, j'ai installer xubuntu en duel boot avec le windows 10 mais au debut j'avais du mal à lancer xubuntu, après mes recherches j'ai utilisé le logiciel EazyBCD sous window pour mettre en entrer les deux systeme, tout allais encore bien, mais j'ai commis une tres grave erreur en supprimant l'entrer windows, depuis ce temp je n'ai l'accès qu'à xubuntu, j'ai utiliser le boot-repair sous xubuntu, mais il refuse de me proposer l'entrer windows.
Que dois-je faire pour resoudre mon problème?? I need your help please
Hors ligne
#2 Le 18/05/2017, à 18:14
- lucmars
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Quand tu demarres xubu est-ce que grub, si il s'affiche, te proposes windows ?
Sinon, sous xubu, avec le terminal tu passes la commande suivante :
sudo os-prober
os-prober va tenter de trouver les os présents. Puis, quoiqu'il trouve, tu en informes grub via:
sudo update grub
Gaulois Matter !
Hors ligne
#3 Le 18/05/2017, à 18:57
- malbo
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Depuis une session de ton Xubuntu installé, je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#4 Le 18/05/2017, à 21:45
- EL-hadad
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Quand tu demarres xubu est-ce que grub, si il s'affiche, te proposes windows ?
Sinon, sous xubu, avec le terminal tu passes la commande suivante :
sudo os-prober
os-prober va tenter de trouver les os présents. Puis, quoiqu'il trouve, tu en informes grub via:
sudo update grub
Merci mais je n'arrive toujours pas, on ne me montre pas tout les OS
Hors ligne
#5 Le 18/05/2017, à 21:53
- EL-hadad
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Depuis une session de ton Xubuntu installé, je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.
ok voici ce que je trouves http://paste2.org/
Hors ligne
#6 Le 19/05/2017, à 06:41
- malbo
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Il y a un souci avec Boot-Info : ça ne semble pas fonctionner chez toi. A la place du Boot-Info, je te prie de faire un rapport Bisnext.
Hors ligne
#7 Le 19/05/2017, à 11:14
- EL-hadad
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Il y a un souci avec Boot-Info : ça ne semble pas fonctionner chez toi. A la place du Boot-Info, je te prie de faire un rapport Bisnext.
ok voici le lien https://paste.debian.net/933170/
Hors ligne
#8 Le 19/05/2017, à 17:24
- malbo
Re : Recuperation de windows 10 apres l'avoir perdu sous xubuntu
Ton rapport Bisnext est là :
Posting 933170 from bn-56e31 posted at 2017-05-19 09:09:11 expires: 2017-06-18 09:09:11
May 19, 2017, bisnext report id 56e31
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-52-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: Hewlett-Packard product: HP 15 Notebook PC v: 0974100002405F00000620180
Mobo: Hewlett-Packard model: 8014 v: 10.13
UEFI: Insyde v: F.11 date: 09/25/2014
Chassis: type: 10
Battery BAT0: charge: 18.6 Wh 100.0% condition: 18.6/18.6 Wh (100%)
volts: 12.7/11.1
model: Hewlett-Packard Primary status: Full
CPU: Dual core Intel Core i3-4030U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7581
clock speeds: min/max: 800/1800 MHz 1: 811 MHz 2: 1800 MHz
3: 845 MHz 4: 800 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: Bottom-Slot 1(top) size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: Hynix part: HMT451S6BFR8A-PB
Device-2: Bottom-Slot 2(under) size: No Module Installed type: N/A
Graphics: Card: Intel Haswell-ULT Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0a16
Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@60.00hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9c20
Card-2 Intel Haswell-ULT HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0a0c
Sound: Advanced Linux Sound Architecture v: k4.8.0-52-generic
Network: Card-1: Realtek RTL8188EE Wireless Network Adapter
driver: rtl8188ee port: 4000 bus-ID: 08:00.0 chip-ID: 10ec:8179
IF: wlo1 state: up mac: <filter>
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: 3000
bus-ID: 09:00.0 chip-ID: 10ec:8136
IF: eno1 state: down mac: <filter>
Drives: HDD Total Size: 750.2GB (68.2% used)
ID-1: /dev/sda model: ST750LM022_HN size: 750.2GB
temp: 34C
Optical: /dev/sr0 model: hp DVDRW GUB0N
rev: UB00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 78G used: 5.6G (8%) fs: ext4 dev: /dev/sda10
label: N/A uuid: b9b5e87c-e195-4624-9a6c-98f3492aff1d
ID-2: /home size: 46G used: 928M (3%) fs: ext4 dev: /dev/sda9
label: N/A uuid: 1771c0c5-ece6-4153-80b6-2cf49dc36233
ID-3: /boot size: 1.9G used: 112M (7%) fs: ext4 dev: /dev/sda8
label: N/A uuid: 9326abd4-6eba-4b1e-bf67-382cc06e826d
ID-4: /boot/efi size: 256M used: 123M (49%) fs: vfat dev: /dev/sda2
label: N/A uuid: E2F2-82CE
ID-5: /media/djelassem_kevin/Windows size: 322G used: 238G (74%) fs: fuseblk dev: /dev/sda4
label: Windows uuid: 8872C9D872C9CB60
ID-6: /mnt/boot-sav/sda1 size: 650M used: 252M (39%) fs: fuseblk dev: /dev/sda1
label: WINRE uuid: F40A507C0A503E34
ID-7: /mnt/boot-sav/sda5 size: 228G used: 213G (94%) fs: fuseblk dev: /dev/sda5
label: New Volume uuid: 76662B18662AD91F
ID-8: /mnt/boot-sav/sda7 size: 20G used: 18G (91%) fs: fuseblk dev: /dev/sda7
label: RECOVERY uuid: 0C084E2B084E145C
ID-9: swap-1 size: 2.00GB used: 0.01GB (0%) fs: swap dev: /dev/sda6
label: N/A uuid: c648d345-7c7e-449c-af93-5853b829b6ce
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda3 size: 0.13G
fs: ext2 label: N/A uuid: dd53b04b-f072-4550-a0ff-642900eeea8b
Sensors: System Temperatures: cpu: 43.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://ga.archive.ubuntu.com/ubuntu/ xenial main restricted
deb-src http://ga.archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://ga.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb-src http://ga.archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
deb http://ga.archive.ubuntu.com/ubuntu/ xenial universe
deb http://ga.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://ga.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://ga.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://ga.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb-src http://ga.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/webupd8team-ubuntu-sublime-text-2-xenial.list
deb http://ppa.launchpad.net/webupd8team/sublime-text-2/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 10.5% command: firefox pid: 15727 mem: 608.88MB (15.6%)
2: cpu: 1.4% command: Xorg pid: 962 mem: 90.47MB (2.3%)
3: cpu: 0.5% daemon: ~kworker/u16:1~ pid: 17071 mem: 0.00MB (0.0%)
4: cpu: 0.2% daemon: ~kworker/3:1~ pid: 17276 mem: 0.00MB (0.0%)
5: cpu: 0.2% daemon: ~kworker/u16:0~ pid: 17108 mem: 0.00MB (0.0%)
6: cpu: 0.2% command: xfwm4 pid: 1344 mem: 19.04MB (0.4%)
7: cpu: 0.1% daemon: ~kworker/3:2~ pid: 9240 mem: 0.00MB (0.0%)
8: cpu: 0.1% command: glade2script (started by: python) pid: 2323 mem: 57.73MB (1.4%)
9: cpu: 0.1% command: pulseaudio pid: 1469 mem: 11.14MB (0.2%)
10: cpu: 0.0% command: gconfd-2 pid: 20846 mem: 4.89MB (0.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 608.88MB (15.6%) command: firefox pid: 15727 cpu: 10.5%
2: mem: 185.95MB (4.7%) command: gnome-software pid: 12350 cpu: 0.0%
3: mem: 104.01MB (2.6%) command: Super (started by: evince) pid: 9257 cpu: 0.0%
4: mem: 90.47MB (2.3%) command: Xorg pid: 962 cpu: 1.4%
5: mem: 57.73MB (1.4%) command: glade2script (started by: python) pid: 2323 cpu: 0.1%
6: mem: 54.39MB (1.4%) command: sublime_text pid: 2286 cpu: 0.0%
7: mem: 47.05MB (1.2%) command: blueman-applet (started by: python3) pid: 1605 cpu: 0.0%
8: mem: 34.70MB (0.8%) command: Thunar pid: 1345 cpu: 0.0%
9: mem: 31.57MB (0.8%) command: nm-applet pid: 1614 cpu: 0.0%
10: mem: 31.32MB (0.8%) command: fwupd pid: 12360 cpu: 0.0%
Info: Processes: 240 Uptime: 18:57 Memory: 1440.4/3881.0MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0003,3003,0000,0002,2001,2002,2003
Boot0000* ubuntu HD(2,GPT,3c9bc69b-da79-4cbe-9df0-f8293dfe349b,0x145800,0x82000)/File(\EFI\ubuntu\shimx64.efi)
Boot0002* Network Adapter (IPv4 UEFI) PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(3863bba25aff,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot0003* Windows Boot Manager HD(2,GPT,3c9bc69b-da79-4cbe-9df0-f8293dfe349b,0x145800,0x82000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot2001* USB Drive (UEFI) RC
Boot2002* Internal CD/DVD ROM Drive (UEFI) RC
Boot3000* Internal Hard Disk or Solid State Disk RC
Boot3001* Internal Hard Disk or Solid State Disk RC
Boot3002* Internal Hard Disk or Solid State Disk RC
Boot3003* Internal Hard Disk or Solid State Disk RC
vfat partitions details:
/dev/sda2: UUID="E2F2-82CE" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="3c9bc69b-da79-4cbe-9df0-f8293dfe349b"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda2:
9cdfbae08da935c0b9c77f01bb2807c6 /EFI/Microsoft/Boot/bootmgfw.efi
c79876d32448cd0ec360d7660ea310d9 /EFI/Microsoft/Boot/bootmgr.efi
7f64065fea99fee26019d4c8bc896c53 /EFI/Microsoft/Boot/memtest.efi
9cdfbae08da935c0b9c77f01bb2807c6 /EFI/Boot/bootx64.efi
1b8c0684ede8539ccc205cf7a750eca3 /EFI/HP/SystemDiags/CryptRSA32.efi
6488d391f74263c9da3c3d47dffa6212 /EFI/HP/SystemDiags/CryptRSA.efi
81afe616ebc48343d18ca58e09ca1bc0 /EFI/HP/SystemDiags/SystemDiags.efi
3f9027afaaff783996eba90cd7a21f20 /EFI/HP/SystemDiags/SystemDiags32.efi
1b8c0684ede8539ccc205cf7a750eca3 /EFI/HP/BIOSUpdate/CryptRSA32.efi
6488d391f74263c9da3c3d47dffa6212 /EFI/HP/BIOSUpdate/CryptRSA.efi
ba7f111325d8f28a617335c2325952d7 /EFI/HP/BIOSUpdate/HpBiosUpdate.efi
d3eb36acc70938c47b96015b54451282 /EFI/HP/BIOSUpdate/HpBiosUpdate32.efi
6514d19c16df6d0d9cf75bba91350dcc /EFI/HP/boot/bootmgfw.efi
89eee1b88c9b1c7627841fe280200042 /EFI/HP/boot/bootmgr.efi
f7628ccdc692b41fc7f3e09475b03f7e /EFI/HP/boot/memtest.efi
7ac06cc534d41e22fdf5025a01a1bb8a /EFI/HP/EFI/Boot/bootx64.efi
bb5d5e5f542cefd0d616f8c84397b27b /EFI/HP/EFI/Microsoft/Boot/memtest.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
9cdfbae08da935c0b9c77f01bb2807c6 /boot-sav/log/2017-05-17__15h59boot-repair22/sda2/bootx64.efi
9cdfbae08da935c0b9c77f01bb2807c6 /boot-sav/log/2017-05-17__16h39boot-repair35/sda2/bootx64.efi
9cdfbae08da935c0b9c77f01bb2807c6 /boot-sav/log/2017-05-18__12h45boot-repair51/sda2/bootx64.efi
9cdfbae08da935c0b9c77f01bb2807c6 /boot-sav/log/2017-05-18__15h06boot-repair18/sda2/bootx64.efi
3aef9c72ad50faa8db576c01f85a0915 /ubuntu/shimx64.efi
========================= Boot Information Details ============================
=> Lilo is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /etc/fstab /etc/default/grub
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/BCD
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /etc/fstab
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 698,7 GiB, 750156374016 octets, 1465149168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 R 2,048 1,333,247 1,331,200 Windows Recovery Environment (Windows)
/dev/sda2 1,333,248 1,865,727 532,480 EFI System partition
/dev/sda3 1,865,728 2,127,871 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 2,127,872 676,929,535 674,801,664 Data partition (Windows/Linux)
/dev/sda5 676,929,536 1,154,646,015 477,716,480 Data partition (Windows/Linux)
/dev/sda6 1,154,646,016 1,158,551,551 3,905,536 Swap partition (Linux)
/dev/sda7 R 1,424,607,232 1,465,137,151 40,529,920 Data partition (Windows/Linux)
/dev/sda8 1,158,551,552 1,162,457,087 3,905,536 Data partition (Linux)
/dev/sda9 1,162,457,088 1,260,113,919 97,656,832 Data partition (Linux)
/dev/sda10 1,260,113,920 1,424,607,231 164,493,312 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 F40A507C0A503E34 ntfs WINRE
/dev/sda10 b9b5e87c-e195-4624-9a6c-98f3492aff1d ext4
/dev/sda2 E2F2-82CE vfat
/dev/sda3 dd53b04b-f072-4550-a0ff-642900eeea8b ext2
/dev/sda4 8872C9D872C9CB60 ntfs Windows
/dev/sda5 76662B18662AD91F ntfs New Volume
/dev/sda6 c648d345-7c7e-449c-af93-5853b829b6ce swap
/dev/sda7 0C084E2B084E145C ntfs RECOVERY
/dev/sda8 9326abd4-6eba-4b1e-bf67-382cc06e826d ext4
/dev/sda9 1771c0c5-ece6-4153-80b6-2cf49dc36233 ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 18 15:11 ata-hp_DVDRW_GUB0N_M7NEASA3032 -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520 -> ../../sda
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 mai 18 22:05 ata-ST750LM022_HN-M750MBB_S31PJ9KFA02520-part9 -> ../../sda9
lrwxrwxrwx 1 root root 9 mai 18 22:05 wwn-0x50004cf20e5d561d -> ../../sda
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 mai 18 22:05 wwn-0x50004cf20e5d561d-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 mai 18 22:05 wwn-0x50004cf20e5d561d-part9 -> ../../sda9
lrwxrwxrwx 1 root root 9 mai 18 15:11 wwn-0x5001480000000000 -> ../../sr0
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda10 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda9 /home ext4 (rw,relatime,data=ordered)
/dev/sda8 /boot ext4 (rw,relatime,data=ordered)
/dev/sda2 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda4 /media/djelassem_kevin/Windows fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sda1 /mnt/boot-sav/sda1 fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 /mnt/boot-sav/sda5 fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda7 /mnt/boot-sav/sda7 fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
__________________________=== Boot Files Content ===___________________________
_______________________________ sda3/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=dd53b04b-f072-4550-a0ff-642900eeea8b / ext2 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=E2F2-82CE /boot/efi vfat umask=0077 0 1
____________________________ sda3/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
_______________________________ sda10/etc/fstab: _______________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda10 during installation
UUID=b9b5e87c-e195-4624-9a6c-98f3492aff1d / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda8 during installation
UUID=9326abd4-6eba-4b1e-bf67-382cc06e826d /boot ext4 defaults 0 2
# /boot/efi was on /dev/sda2 during installation
#UUID=E2F2-82CE /boot/efi vfat umask=0077 0 1
# /home was on /dev/sda9 during installation
UUID=1771c0c5-ece6-4153-80b6-2cf49dc36233 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=c648d345-7c7e-449c-af93-5853b829b6ce none swap sw 0 0
UUID=E2F2-82CE /boot/efi vfat defaults 0 1
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/vmlinuz-4.8.0-52-generic.efi.signed root=UUID=b9b5e87c-e195-4624-9a6c-98f3492aff1d ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 1min 47.879s (firmware) + 1min 18.630s (loader) + 4.908s (kernel) + 36.515s (userspace) = 3min 47.934s
blame, first 10:
dev-sda10.device 9.186s
NetworkManager-wait-online.service 7.080s
networking.service 5.091s
ondemand.service 5.026s
rsyslog.service 5.007s
systemd-fsck@dev-disk-by\x2duuid-E2F2\x2d82CE.service 4.050s
NetworkManager.service 3.132s
accounts-daemon.service 3.093s
ModemManager.service 2.964s
apparmor.service 2.538s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @36.492s
2 multi-user.target @36.491s
3 apache2.service @35.119s +1.371s
4 network-online.target @35.100s
5 NetworkManager-wait-online.service @28.019s +7.080s
6 NetworkManager.service @24.865s +3.132s
7 dbus.service @19.876s
8 basic.target @19.874s
9 sockets.target @19.874s
10 acpid.socket @19.849s
11 sysinit.target @19.847s
12 apparmor.service @17.257s +2.538s
13 local-fs.target @17.238s
14 boot-efi.mount @17.099s +136ms
15 systemd-fsck@dev-disk-by\x2duuid-E2F2\x2d82CE.service @12.893s +4.050s
16 dev-disk-by\x2duuid-E2F2\x2d82CE.device @12.890s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 3.8G 1.2G 339M 129M 2.2G 2.1G
Swap: 1.9G 4.8M 1.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda10 / ext4 78G 5.6G 68G 8% 5%
/dev/sda1 /mnt/boot-sav/sda1 fuseblk 650M 252M 399M 39% 1%
/dev/sda2 /boot/efi vfat 256M 123M 134M 49% -
/dev/sda4 /media/djelassem_kevin/Windows fuseblk 322G 238G 84G 74% 1%
/dev/sda5 /mnt/boot-sav/sda5 fuseblk 228G 213G 15G 94% 1%
/dev/sda7 /mnt/boot-sav/sda7 fuseblk 20G 18G 2.0G 91% 1%
/dev/sda8 /boot ext4 1.9G 112M 1.6G 7% 1%
/dev/sda9 /home ext4 46G 928M 43G 3% 1%
Swap partition for hibernation : UUID=c648d345-7c7e-449c-af93-5853b829b6ce
_________________________________ USB devices __________________________________
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 05c8:0226 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
|__ Port 3: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 2
aes_x86_64 20480 1 aesni_intel
ahci 36864 9
arc4 16384 2
autofs4 40960 2
binfmt_misc 20480 1
btrfs 1060864 0
ccm 20480 1
cfg80211 581632 2 mac80211,rtlwifi
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
drm 368640 5 i915,drm_kms_helper
drm_kms_helper 167936 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hp_wireless 16384 0
hp_wmi 16384 0
i2c_algo_bit 16384 1 i915
i915 1314816 4
input_leds 16384 0
intel_cstate 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
irqbypass 16384 1 kvm
jfs 184320 0
joydev 20480 0
kvm 598016 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
lrw 16384 1 aesni_intel
mac80211 761856 3 rtl_pci,rtl8188ee,rtlwifi
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 20480 1 rtsx_pci_ms
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rtl8188ee 86016 0
rtl_pci 28672 1 rtl8188ee
rtlwifi 77824 2 rtl_pci,rtl8188ee
rtsx_pci 57344 2 rtsx_pci_sdmmc,rtsx_pci_ms
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 36864 0
snd 86016 21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 hp_wmi
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
uas 24576 0
ufs 73728 0
usb_storage 73728 1 uas
uvcvideo 90112 0
video 40960 1 i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 180224 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 1 hp_wmi
x86_pkg_temp_thermal 16384 0
xfs 1048576 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
variant: oss
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
iproute2 4.3.0-1ubuntu3.16.04.1 from:4.3.0-1ubuntu3
unattended-upgrades 0.90ubuntu0.6 from:0.90ubuntu0.5
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
glade2script python-gi shim snap-confine syslinux-common
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.52.23
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-4.8.0-52 4.8.0-52.55~16.04.1
linux-headers-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.52.23
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-generic-hwe-16.04 4.8.0.52.23
File list in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-52-generic
boot.0800
coffee.bmp
config-4.8.0-36-generic
config-4.8.0-52-generic
debian.bmp
debian-de.bmp
debianlilo.bmp
efi
grub.bak
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-52-generic
inside.bmp
lost+found
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
onlyblue.bmp
System.map-4.8.0-36-generic
System.map-4.8.0-52-generic
tuxlogo.bmp
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-52-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ceaef98
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 HPQOEM 8014 00000001 HP 00040000)
[ 0.164952] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.623825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.659424] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.697046] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[ 1.152292] SCSI subsystem initialized
[ 1.988510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.989196] efifb: probing for efifb
[ 1.989206] efifb: framebuffer at 0xa0000000, using 4160k, total 4160k
[ 1.989208] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.989208] efifb: scrolling: redraw
[ 1.989209] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.989319] fb0: EFI VGA frame buffer device
[ 1.991284] [Firmware Bug]: Invalid critical threshold (0)
[ 2.028420] EFI Variables Facility v0.08 2004-May-17
[ 2.177513] scsi host0: ahci
[ 2.177627] scsi host1: ahci
[ 2.177717] scsi host2: ahci
[ 2.177802] scsi host3: ahci
[ 2.199049] fb: switching to inteldrmfb from EFI VGA
[ 2.492218] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.492236] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.504910] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0001 PQ: 0 ANSI: 5
[ 2.549031] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.549041] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.550889] scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5
[ 2.576321] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.576570] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.576684] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.596697] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.953380] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[ 13.636485] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
[ 24.525225] audit: type=1400 audit(1495116726.929:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=741 comm="apparmor_parser"
[ 24.525231] audit: type=1400 audit(1495116726.929:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=741 comm="apparmor_parser"
[ 24.552252] audit: type=1400 audit(1495116726.957:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=738 comm="apparmor_parser"
[ 24.552258] audit: type=1400 audit(1495116726.957:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser"
[ 24.552262] audit: type=1400 audit(1495116726.957:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=738 comm="apparmor_parser"
[ 24.552267] audit: type=1400 audit(1495116726.957:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser"
[ 24.599388] audit: type=1400 audit(1495116727.005:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=737 comm="apparmor_parser"
[ 24.599396] audit: type=1400 audit(1495116727.005:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=737 comm="apparmor_parser"
[ 24.610230] audit: type=1400 audit(1495116727.017:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=742 comm="apparmor_parser"
[ 24.612429] audit: type=1400 audit(1495116727.017:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=744 comm="apparmor_parser"
[ 50.587974] wlo1: RX AssocResp from c4:12:f5:7c:31:50 (capab=0x431 status=0 aid=19)
[ 1421.442834] scsi host4: usb-storage 2-1:1.0
[ 1422.458909] scsi 4:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 1422.459763] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1422.463263] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1649.375026] scsi host4: usb-storage 2-1:1.0
[ 1650.400474] scsi 4:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 1650.400997] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1650.407513] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[18023.492391] audit: type=1400 audit(1495134724.616:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=18699 comm="apparmor_parser"
[18023.506349] audit: type=1400 audit(1495134724.632:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=18699 comm="apparmor_parser"
[62412.686990] wlo1: RX AssocResp from c4:12:f5:7c:31:50 (capab=0x431 status=0 aid=5)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ HP Webcam id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=10 [slave keyboard (3)]
↳ HP WMI hotkeys id=12 [slave keyboard (3)]
↳ HP Wireless hotkeys id=13 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.00*+ 40.00
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
HDMI-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.386] (==) No Layout section. Using the first Screen section.
[ 34.386] (==) No screen section available. Using defaults.
[ 34.386] (**) |-->Screen "Default Screen Section" (0)
[ 34.386] (**) | |-->Monitor "<default monitor>"
[ 34.406] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.425] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2163 rev 11, Mem @ 0xb2000000/4194304, 0xa0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 34.425] (II) LoadModule: "glx"
[ 34.459] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.721] (II) LoadModule: "modesetting"
[ 34.721] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 34.722] (II) LoadModule: "fbdev"
[ 34.722] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 34.722] (II) LoadModule: "vesa"
[ 34.722] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 34.724] (WW) Falling back to old probe method for fbdev
[ 34.724] (II) Loading sub module "fbdevhw"
[ 34.724] (II) LoadModule: "fbdevhw"
[ 34.724] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 34.724] (WW) Falling back to old probe method for vesa
[ 34.724] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 34.724] (II) Loading sub module "glamoregl"
[ 34.724] (II) LoadModule: "glamoregl"
[ 34.724] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 35.560] (II) modeset(0): Output eDP-1 has no monitor section
[ 35.561] (II) modeset(0): Output HDMI-1 has no monitor section
[ 35.565] (II) Loading sub module "fb"
[ 35.565] (II) LoadModule: "fb"
[ 35.565] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 35.579] (II) UnloadModule: "fbdev"
[ 35.579] (II) UnloadModule: "vesa"
[ 35.848] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 35.891] (II) modeset(0): Setting screen physical size to 361 x 203
[ 36.003] (II) LoadModule: "evdev"
[ 36.003] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 36.051] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 36.051] (II) LoadModule: "synaptics"
[ 36.052] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-52-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-52-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:a16
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST750LM022 HN-M750MBB
LU WWN Device Id: 5 0004cf 20e5d561d
Firmware Version: 2BA30001
User Capacity: 750 156 374 016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri May 19 10:09:03 2017 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 12
2 Throughput_Performance POS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 092 091 025 - 2506
4 Start_Stop_Count -O--CK 092 092 000 - 8122
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate POSR-K 252 252 051 - 0
8 Seek_Time_Performance P-S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 5990
10 Spin_Retry_Count PO--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 437
12 Power_Cycle_Count -O--CK 098 098 000 - 2054
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 1323084
183 Runtime_Bad_Block -O--CK 252 252 010 - 0
184 End-to-End_Error PO--CK 252 252 048 - 0
186 Unknown_Attribute -O--CK 252 252 000 - 0
187 Reported_Uncorrect -O--CK 252 252 000 - 0
188 Command_Timeout -O--CK 252 252 000 - 0
190 Airflow_Temperature_Cel -O---- 066 054 040 - 34 (Min/Max 22/47)
191 G-Sense_Error_Rate -O---K 100 100 000 - 361
192 Power-Off_Retract_Count -O---K 100 100 000 - 35
193 Load_Cycle_Count -O--CK 074 074 000 - 265912
194 Temperature_Celsius -O---- 064 054 000 - 34 (Min/Max 22/47)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 22985
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
Je te suggère de réparer ton installation de Windows 10 sans t'occuper de Xubuntu. Pour cela, demande de l'aide sur un forum Windows. Quand Windows sera réparé et fonctionnel, tu tenteras de remettre en état le dual-boot.
Dernière modification par malbo (Le 21/05/2017, à 19:11)
Hors ligne