Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/05/2017, à 17:47

Caribou22

Deux disques durs internes non-détectés

Bonsoir smile

J'ai l'ordi d'un ami qui a Xubuntu 16.04 installé sur un SSD de 240 Go + deux HDD de 1 To.
Les deux HDD sont désespérément inutilisables (Invisibles dans GParted, Thunar, ou GNOME-disk-utility.) et j'aimerais simplement les formater tous les deux en ext4... sad

Du coup je suppose qu'il y a du HDD HS sachant qu'ils auraient à peine 1 an...
Est-ce que vous auriez une idée sur ce qui doit être fait/changé ?
Si vous pourriez m'apprendre à comprendre comment voir l'état de santé d'un disque ça me servirait aussi wink

Voici le rapport bisnext : https://paste.debian.net/932179/

May 12 2017, bisnext report id f7440 also available at https://paste.debian.net/932179/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.8.0-49-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
           Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: MAXIMUS V FORMULA v: Rev 1.xx
           BIOS: American Megatrends v: 1604 date: 12/21/2012
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i7-3770 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27344
           clock speeds: min/max: 1600/3900 MHz 1: 1600 MHz 2: 1696 MHz
           3: 1612 MHz 4: 1622 MHz 5: 1616 MHz 6: 1619 MHz 7: 1611 MHz
           8: 2648 MHz
Memory:    Array-1 capacity: 32 GB devices: 4 EC: None
           Device-1: ChannelA-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-2: ChannelA-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-3: ChannelB-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-4: ChannelB-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
Graphics:  Card: NVIDIA GK106 [GeForce GTX 650 Ti]
           bus-ID: 02:00.0 chip-ID: 10de:11c6
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           tty size: 1920x1080@60.00hz
           GLX Renderer: GeForce GTX 650 Ti/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: Yes
Audio:     Card-1 Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
           Card-2 NVIDIA GK106 HDMI Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0e0b
           Sound: Advanced Linux Sound Architecture v: k4.8.0-49-generic
Network:   Card-1: Intel 82579V Gigabit Network Connection
           driver: e1000e v: 3.2.6-k port: f040
           bus-ID: 00:19.0 chip-ID: 8086:1503
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Broadcom BCM43228 802.11a/b/g/n
           driver: bcma-pci-bridge bus-ID: 0c:00.0 chip-ID: 14e4:4359
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 2240.5GB (0.7% used)
           ID-1: /dev/sda model: SPCC_Solid_State size: 240.1GB
           temp: 0C
           ID-2: /dev/sdg model: WDC_WD10EZEX size: 1000.2GB
           temp: 29C
           ID-3: /dev/sdh model: WDC_WD10EZEX size: 1000.2GB
          
           Optical: /dev/sr0 model: ASUS BW-16D1HT
           rev: 1.01 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 218G used: 13G (6%) fs: ext4 dev: /dev/sda5
           label: N/A uuid: 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
           ID-2: /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb size: 917G used: 72M (1%) fs: ext4 dev: /dev/sdg1
           label: Personnel uuid: 80fe17d9-965d-4957-b7aa-555bdf252ccb
           ID-3: swap-1 size: 3.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
           label: N/A uuid: 76f83f3a-02bc-4dc1-8773-2236963b90e3
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:33C
           Fan Speeds (in rpm): cpu: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 7.1% command: firefox pid: 2141 mem: 399.00MB (1.2%)
           2: cpu: 1.6% command: Xorg pid: 1105 mem: 81.36MB (0.2%)
           3: cpu: 0.4% command: xfce4-terminal pid: 2379 mem: 26.98MB (0.0%)
           4: cpu: 0.2% command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1756 mem: 69.66MB (0.2%)
           5: cpu: 0.1% command: smartd pid: 2874 mem: 4.19MB (0.0%)
           6: cpu: 0.1% command: libsystemload.so (started by: wrapper-1.0) pid: 1759 mem: 14.45MB (0.0%)
           7: cpu: 0.1% command: xfwm4 pid: 1657 mem: 21.59MB (0.0%)
           8: cpu: 0.1% daemon: ~scsi_eh_9~ pid: 226 mem: 0.00MB (0.0%)
           9: cpu: 0.1% command: init pid: 1 mem: 6.13MB (0.0%)
           10: cpu: 0.0% command: sed pid: 2999 mem: 1.06MB (0.0%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 399.00MB (1.2%) command: firefox pid: 2141 cpu: 7.1%
           2: mem: 81.36MB (0.2%) command: Xorg pid: 1105 cpu: 1.6%
           3: mem: 69.66MB (0.2%) command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1756 cpu: 0.2%
           4: mem: 53.61MB (0.1%) command: blueman-applet (started by: python3) pid: 1695 cpu: 0.0%
           5: mem: 43.79MB (0.1%) command: xfdesktop pid: 1673 cpu: 0.0%
           6: mem: 34.93MB (0.1%) command: nm-applet pid: 1678 cpu: 0.0%
           7: mem: 32.87MB (0.1%) command: libindicator-plugin.so (started by: wrapper-2.0) pid: 1771 cpu: 0.0%
           8: mem: 30.52MB (0.0%) command: applet.py (started by: python3) pid: 1687 cpu: 0.0%
           9: mem: 29.78MB (0.0%) command: polkit-gnome-authentication-agent-1 pid: 1684 cpu: 0.0%
           10: mem: 29.17MB (0.0%) command: Thunar pid: 1671 cpu: 0.0%
Info:      Processes: 257 Uptime: 13 min Memory: 847.5/32118.9MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => libparted MBR boot code is installed in the MBR of /dev/sdg.

sda1: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sdg1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdh: ___________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 223,6 GiB, 240057409536 octets, 468862128 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *    462,612,480   468,860,927     6,248,448  82 Linux swap / Solaris
/dev/sda2               2,046   462,612,479   462,610,434   5 Extended
/dev/sda5               2,048   462,612,479   462,610,432  83 Linux


Drive: sdg _____________________________________________________________________
Disque /dev/sdg : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdg1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        76f83f3a-02bc-4dc1-8773-2236963b90e3   swap       
/dev/sda5        99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c   ext4       
/dev/sdg1        80fe17d9-965d-4957-b7aa-555bdf252ccb   ext4       Personnel
/dev/sdh                                                           

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   12 18:33 ata-ASUS_BW-16D1HT_K9F21113936 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai   12 18:33 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   12 18:33 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   12 18:33 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai   12 18:33 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai   12 18:36 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ -> ../../sdg
lrwxrwxrwx 1 root root 10 mai   12 18:36 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ-part1 -> ../../sdg1
lrwxrwxrwx 1 root root  9 mai   12 18:43 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y3FNHAPY -> ../../sdh
lrwxrwxrwx 1 root root  9 mai   12 18:33 usb-Generic-_Compact_Flash_058F63646476-0:1 -> ../../sdd
lrwxrwxrwx 1 root root  9 mai   12 18:33 usb-Generic-_MS_MS-Pro_058F63646476-0:3 -> ../../sdf
lrwxrwxrwx 1 root root  9 mai   12 18:33 usb-Generic-_SD_MMC_058F63646476-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 mai   12 18:33 usb-Generic-_SM_xD-Picture_058F63646476-0:2 -> ../../sde
lrwxrwxrwx 1 root root  9 mai   12 18:33 usb-Lexmark_USB_Mass_Storage_22N0180150026W3-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 mai   12 18:36 wwn-0x50014ee20e21f9b7 -> ../../sdg
lrwxrwxrwx 1 root root 10 mai   12 18:36 wwn-0x50014ee20e21f9b7-part1 -> ../../sdg1
lrwxrwxrwx 1 root root  9 mai   12 18:43 wwn-0x50014ee263771310 -> ../../sdh

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda5        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdg1        /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb            ext4 (rw,nosuid,nodev,relatime,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda5/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
        linux	/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-49-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda5/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda1 during installation
UUID=76f83f3a-02bc-4dc1-8773-2236963b90e3 none            swap    sw              0       0
/dev/sdd /mnt/sdd auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/80fe17d9-965d-4957-b7aa-555bdf252ccb /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda5/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

_________ Devices which don't seem to have a corresponding hard drive: _________

sdb sdc sdd sde sdf 


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro quiet splash


______________________________ Boot-up Statistics ______________________________

Startup finished in 1min 2.099s (kernel) + 16.222s (userspace) = 1min 18.322s


blame, first 10:
NetworkManager-wait-online.service                                                    8.354s
udev-configure-printer@-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.6.service  6.570s
udisks2.service                                                                       5.890s
dev-sda5.device                                                                       993ms
systemd-rfkill.service                                                                927ms
NetworkManager.service                                                                384ms
ModemManager.service                                                                  381ms
accounts-daemon.service                                                               300ms
upower.service                                                                        279ms
apport.service                                                                        202ms


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @10.048s
  2 multi-user.target @10.047s
  3 teamviewerd.service @9.917s +130ms
  4 network-online.target @9.903s
  5 NetworkManager-wait-online.service @1.549s +8.354s
  6 NetworkManager.service @1.164s +384ms
  7 dbus.service @1.154s
  8 basic.target @1.153s
  9 sockets.target @1.153s
 10 snapd.socket @1.151s +1ms
 11 sysinit.target @1.151s
 12 swap.target @1.151s
 13 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.swap @1.144s +5ms
 14 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.device @1.114s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:            31G        765M         29G         42M        855M         30G
Swap:          3.0G          0B        3.0G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda5      /                                         ext4  218G   13G  194G   6%    3%
/dev/sdg1      /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb ext4  917G   72M  871G   1%    1%


_________________________________ USB devices __________________________________

Bus 002 Device 005: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 002 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 002 Device 003: ID 043d:00f7 Lexmark International, Inc. InkJet Color Printer
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 001 Device 003: ID 0b05:17b5 ASUSTek Computer, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 3, If 2, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
        |__ Port 6: Dev 3, If 3, Class=Human Interface Device, Driver=usbhid, 480M
        |__ Port 6: Dev 3, If 1, Class=Printer, Driver=usblp, 480M
        |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=xpad, 12M
            |__ Port 2: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 2, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 3, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 1: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M
        |__ Port 1: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 3: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 480M


_______________________________ Wireless Status _______________________________

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ablk_helper            16384  1 aesni_intel
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
b43                   413696  0
bcma                   61440  1 b43
binfmt_misc            20480  1
bluetooth             557056  39 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  1 btusb
btintel                16384  1 btusb
btrfs                1060864  0
btrtl                  16384  1 btusb
btusb                  45056  0
cfg80211              581632  2 b43,mac80211
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
drm                   368640  5 nvidia_drm,drm_kms_helper
drm_kms_helper        167936  1 nvidia_drm
e1000e                249856  0
edac_core              53248  1 ie31200_edac
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
ff_memless             16384  1 xpad
fjes                   28672  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hfs                    57344  0
hfsplus               106496  0
hid                   122880  3 hid_generic,usbhid
hid_generic            16384  0
ie31200_edac           16384  0
input_leds             16384  0
intel_cstate           16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
joydev                 20480  0
kvm                   598016  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lpc_ich                24576  0
lrw                    16384  1 aesni_intel
mac80211              761856  1 b43
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
minix                  40960  0
msdos                  20480  0
mxm_wmi                16384  0
ntfs                  102400  0
nvidia              12144640  43 nvidia_modeset,nvidia_uvm
nvidia_drm             49152  2
nvidia_modeset        790528  3 nvidia_drm
nvidia_uvm            647168  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
ppdev                  20480  0
pps_core               20480  1 ptp
psmouse               139264  0
ptp                    20480  1 e1000e
qnx4                   16384  0
raid6_pq              102400  1 btrfs
rfcomm                 77824  12
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  5
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
ssb                    65536  1 b43
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tpm_infineon           20480  0
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usblp                  20480  0
usb_storage            73728  1 uas
video                  40960  1 asus_wmi
wmi                    16384  2 asus_wmi,mxm_wmi
x86_pkg_temp_thermal    16384  0
xfs                  1048576  0
xor                    24576  1 btrfs
xpad                   28672  0


______________________________ Additional Drivers _____________________________

== /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0 ==
model    : GK106 [GeForce GTX 650 Ti]
modalias : pci:v000010DEd000011C6sv00001ACCsd0000652Bbc03sc00i00
vendor   : NVIDIA Corporation
driver   : nvidia-304 - distro non-free
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-340 - distro non-free
driver   : nvidia-375 - distro non-free recommended

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:1c.6/0000:05:00.0/0000:06:08.0/0000:0c:00.0 ==
model    : BCM43228 802.11a/b/g/n
modalias : pci:v000014E4d00004359sv00001043sd0000850Cbc02sc80i00
vendor   : Broadcom Corporation
driver   : bcmwl-kernel-source - distro non-free



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr
variant:    oss

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
language-pack-en-base               1:16.04+20160627
language-pack-gnome-en-base         1:16.04+20160627
linux-image-extra-4.4.0-72-generic  4.4.0-72.93
xarchiver                           1:0.5.4-2


Use the following command to clean old configuration files:
sudo apt purge language-pack-en-base language-pack-gnome-en-base linux-image-extra-4.4.0-72-generic xarchiver


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.75.81
linux-generic-hwe-16.04             4.8.0.49.21
linux-headers-4.4.0-75              4.4.0-75.96
linux-headers-4.4.0-75-generic      4.4.0-75.96
linux-headers-4.8.0-46              4.8.0-46.49~16.04.1
linux-headers-4.8.0-46-generic      4.8.0-46.49~16.04.1
linux-headers-4.8.0-49              4.8.0-49.52~16.04.1
linux-headers-4.8.0-49-generic      4.8.0-49.52~16.04.1
linux-headers-generic               4.4.0.75.81
linux-headers-generic-hwe-16.04     4.8.0.49.21
linux-image-4.4.0-72-generic        4.4.0-72.93
linux-image-4.4.0-75-generic        4.4.0-75.96
linux-image-4.8.0-36-generic        4.8.0-36.36~16.04.1
linux-image-4.8.0-46-generic        4.8.0-46.49~16.04.1
linux-image-4.8.0-49-generic        4.8.0-49.52~16.04.1
linux-image-extra-4.4.0-75-generic  4.4.0-75.96
linux-image-extra-4.8.0-36-generic  4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-46-generic  4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-49-generic  4.8.0-49.52~16.04.1
linux-image-generic                 4.4.0.75.81
linux-image-generic-hwe-16.04       4.8.0.49.21


File list in /boot directory:
abi-4.4.0-72-generic
abi-4.4.0-75-generic
abi-4.8.0-36-generic
abi-4.8.0-46-generic
abi-4.8.0-49-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
config-4.8.0-36-generic
config-4.8.0-46-generic
config-4.8.0-49-generic
grub
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-46-generic
initrd.img-4.8.0-49-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
System.map-4.8.0-36-generic
System.map-4.8.0-46-generic
System.map-4.8.0-49-generic
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-49-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-75-generic
4.8.0-49-generic (running kernel)
4.8.0-36-generic

kernel candidates for removal:
4.4.0-72-generic 4.8.0-46-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge   linux-headers-4.4.0-72-generic linux-image-4.4.0-72-generic linux-image-extra-4.4.0-72-generic   linux-headers-4.8.0-46 linux-headers-4.8.0-46-generic linux-image-4.8.0-46-generic linux-image-extra-4.8.0-46-generic  

_________________________________ System Logs ________________________________

Failed services:
  UNIT          LOAD   ACTIVE SUB    DESCRIPTION
● mnt-sdd.mount loaded failed failed /mnt/sdd

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.231001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.311072] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.311217] SCSI subsystem initialized
[    0.842549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.021970] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.043131] scsi host0: ahci
[    1.043271] scsi host1: ahci
[    1.043345] scsi host2: ahci
[    1.043411] scsi host3: ahci
[    1.043455] scsi host4: ahci
[    1.043500] scsi host5: ahci
[    1.043984] scsi host6: ahci
[    1.044043] scsi host7: ahci
[    1.044369] scsi host8: ahci
[    1.044413] scsi host9: ahci
[    1.357171] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.357179] ata9: SATA link down (SStatus 0 SControl 300)
[    1.361103] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.361107] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff94b2be0c5cf8), AE_NOT_FOUND (20160422/psparse-542)
[    1.362035] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.362038] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff94b2be0c5cf8), AE_NOT_FOUND (20160422/psparse-542)
[    1.369178] scsi 0:0:0:0: CD-ROM            ASUS     BW-16D1HT        1.01 PQ: 0 ANSI: 5
[    1.409121] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.409274] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.409331] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.721273] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.723006] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.723009] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff94b2be0db960), AE_NOT_FOUND (20160422/psparse-542)
[    1.723525] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.723532] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff94b2be0db960), AE_NOT_FOUND (20160422/psparse-542)
[    1.723833] scsi 3:0:0:0: Direct-Access     ATA      SPCC Solid State 07.2 PQ: 0 ANSI: 5
[    1.762839] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.762856] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.763874] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.768228] scsi host10: usb-storage 2-1.6:1.2
[    1.938061] scsi host11: usb-storage 1-1.3:1.0
[    2.077095] ata5: SATA link down (SStatus 0 SControl 300)
[    2.787820] scsi 10:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
[    2.788142] sd 10:0:0:0: Attached scsi generic sg2 type 0
[    2.792862] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[    2.947592] scsi 11:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.948315] scsi 11:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.948955] scsi 11:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.949681] scsi 11:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.949943] sd 11:0:0:0: Attached scsi generic sg3 type 0
[    2.950071] sd 11:0:0:1: Attached scsi generic sg4 type 0
[    2.950196] sd 11:0:0:2: Attached scsi generic sg5 type 0
[    2.950340] sd 11:0:0:3: Attached scsi generic sg6 type 0
[    2.953578] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[    2.954203] sd 11:0:0:1: [sdd] Attached SCSI removable disk
[    2.954836] sd 11:0:0:2: [sde] Attached SCSI removable disk
[    2.955578] sd 11:0:0:3: [sdf] Attached SCSI removable disk
[   11.042754] ata7: softreset failed (1st FIS failed)
[   21.042490] ata7: softreset failed (1st FIS failed)
[   56.040201] ata7: softreset failed (1st FIS failed)
[   61.039879] ata7: softreset failed (1st FIS failed)
[   61.039921] ata7: reset failed, giving up
[   61.354080] ata8: SATA link down (SStatus 0 SControl 300)
[   61.827594] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   61.829285] scsi 9:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[   61.863750] sd 9:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[   61.863757] sd 9:0:0:0: Attached scsi generic sg7 type 0
[   61.884900] sd 9:0:0:0: [sdg] Attached SCSI disk
[   62.462302] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   62.564652] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
[   62.564657] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.564659] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.564661] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.564662] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.564664] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.564666] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.581310] audit: type=1400 audit(1494606785.113:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=577 comm="apparmor_parser"
[   62.582147] audit: type=1400 audit(1494606785.113:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=579 comm="apparmor_parser"
[   62.582376] audit: type=1400 audit(1494606785.113:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
[   62.582381] audit: type=1400 audit(1494606785.113:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[   62.582386] audit: type=1400 audit(1494606785.113:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=573 comm="apparmor_parser"
[   62.582390] audit: type=1400 audit(1494606785.113:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[   62.582559] audit: type=1400 audit(1494606785.113:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=578 comm="apparmor_parser"
[   62.582564] audit: type=1400 audit(1494606785.113:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=578 comm="apparmor_parser"
[   62.582568] audit: type=1400 audit(1494606785.113:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=578 comm="apparmor_parser"
[   62.583647] audit: type=1400 audit(1494606785.117:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=583 comm="apparmor_parser"
[   62.821518] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17b5.hcd failed with error -2
[   62.842129] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   62.842134] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   62.842140] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   62.842145] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   62.842146] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found
[   62.842183] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
[   62.842220] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[  139.985182] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  139.985187] ata10.00: failed command: FLUSH CACHE EXT
[  139.985192] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 4
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  139.985195] ata10.00: status: { DRDY }
[  139.985199] ata10: hard resetting link
[  149.998697] ata10: softreset failed (device not ready)
[  149.998704] ata10: hard resetting link
[  160.012896] ata10: softreset failed (device not ready)
[  160.012903] ata10: hard resetting link
[  195.068884] ata10: softreset failed (device not ready)
[  195.068893] ata10: hard resetting link
[  195.383317] ata10: SATA link down (SStatus 0 SControl 320)
[  195.488879] ata10: hard resetting link
[  205.488504] ata10: softreset failed (1st FIS failed)
[  205.488510] ata10: hard resetting link
[  215.488107] ata10: softreset failed (1st FIS failed)
[  215.488114] ata10: hard resetting link
[  242.362044] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362093]  [<ffffffffba91e1a0>] ? commit_timeout+0x10/0x10
[  242.362109] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362131]  [<ffffffffbae99895>] schedule_timeout+0x235/0x3f0
[  242.362139]  [<ffffffffbae95834>] io_schedule_timeout+0xa4/0x110
[  242.362180] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362200]  [<ffffffffbae99895>] schedule_timeout+0x235/0x3f0
[  242.362216]  [<ffffffffbae95834>] io_schedule_timeout+0xa4/0x110
[  242.362263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362282]  [<ffffffffbae99895>] schedule_timeout+0x235/0x3f0
[  242.362292]  [<ffffffffbae95834>] io_schedule_timeout+0xa4/0x110
[  242.362333] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362352]  [<ffffffffbae99895>] schedule_timeout+0x235/0x3f0
[  242.362368]  [<ffffffffbae95834>] io_schedule_timeout+0xa4/0x110
[  242.362428] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.362448]  [<ffffffffbae99895>] schedule_timeout+0x235/0x3f0
[  242.362460]  [<ffffffffbae95834>] io_schedule_timeout+0xa4/0x110
[  250.485622] ata10: softreset failed (1st FIS failed)
[  250.485630] ata10: hard resetting link
[  255.485638] ata10: softreset failed (1st FIS failed)
[  255.485646] ata10: reset failed, giving up
[  255.485665] ata10: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xf t4
[  255.485667] ata10: irq_stat 0x00000040, connection status changed
[  255.485670] ata10: SError: { CommWake DevExch }
[  255.485676] ata10: hard resetting link
[  256.360826] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  256.362320] sd 9:0:0:0: [sdg] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  256.362325] sd 9:0:0:0: [sdg] tag#4 Add. Sense: Logical unit not ready, hard reset required
[  256.362334] blk_update_request: I/O error, dev sdg, sector 0
[  256.362385] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm pool: reading directory lblock 0
[  256.362403] EXT4-fs warning (device sdg1): htree_dirblock_to_tree:960: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[  256.362405] sd 9:0:0:0: [sdg] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  256.362419] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm gvfsd-trash: reading directory lblock 0
[  256.362439] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.362448] ata10.00: detaching (SCSI 9:0:0:0)
[  256.362468] JBD2: Error -5 detected when updating journal superblock for sdg1-8.
[  256.362483] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm pool: reading directory lblock 0
[  256.362487] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.362562] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm gvfsd-trash: reading directory lblock 0
[  256.362569] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.364117] blk_update_request: I/O error, dev sdg, sector 0
[  256.367672] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm gvfsd-trash: reading directory lblock 0
[  256.367680] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.367717] EXT4-fs error (device sdg1): ext4_find_entry:1461: inode #2: comm gvfsd-trash: reading directory lblock 0
[  256.367722] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.380827] sd 9:0:0:0: [sdg] Synchronizing SCSI cache
[  256.420960] blk_update_request: I/O error, dev sdg, sector 0
[  256.421108] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.421129] EXT4-fs error (device sdg1): ext4_put_super:842: Couldn't clean up the journal
[  256.421133] EXT4-fs (sdg1): previous I/O error to superblock detected
[  256.644974] scsi 9:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[  256.692973] sd 9:0:0:0: Attached scsi generic sg7 type 0
[  256.692976] sd 9:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  257.636782] sd 9:0:0:0: [sdg] Attached SCSI disk
[  462.514251] ata7: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
[  462.514259] ata7: SError: { RecovComm PHYRdyChg 10B8B }
[  462.514266] ata7: hard resetting link
[  464.962018] ata7: COMRESET failed (errno=-32)
[  464.962027] ata7: reset failed (errno=-32), retrying in 8 secs
[  472.745368] ata7: hard resetting link
[  475.221144] ata7: COMRESET failed (errno=-32)
[  475.221153] ata7: reset failed (errno=-32), retrying in 8 secs
[  482.984495] ata7: hard resetting link
[  483.696453] ata7: SATA link down (SStatus 0 SControl 310)
[  488.950857] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[  488.950863] ata7: irq_stat 0x00000040, connection status changed
[  488.950865] ata7: SError: { CommWake DevExch }
[  488.950872] ata7: hard resetting link
[  491.427773] ata7: COMRESET failed (errno=-32)
[  491.427782] ata7: reset failed (errno=-32), retrying in 8 secs
[  499.111143] ata7: hard resetting link
[  499.823084] ata7: SATA link down (SStatus 0 SControl 310)
[  500.997768] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[  500.997774] ata7: irq_stat 0x00000040, connection status changed
[  500.997777] ata7: SError: { CommWake DevExch }
[  500.997786] ata7: hard resetting link
[  503.490739] ata7: COMRESET failed (errno=-32)
[  503.490748] ata7: reset failed (errno=-32), retrying in 8 secs
[  511.142083] ata7: hard resetting link
[  513.437886] ata7: COMRESET failed (errno=-32)
[  513.437896] ata7: reset failed (errno=-32), retrying in 8 secs
[  521.381200] ata7: hard resetting link
[  523.604995] ata7: COMRESET failed (errno=-32)
[  523.605005] ata7: reset failed (errno=-32), retrying in 33 secs
[  557.730007] ata7: hard resetting link
[  560.205782] ata7: COMRESET failed (errno=-32)
[  560.205794] ata7: reset failed, giving up
[  560.205853] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen
[  560.205857] ata7: irq_stat 0x00400040, connection status changed
[  560.205860] ata7: SError: { RecovComm PHYRdyChg CommWake DevExch }
[  560.205866] ata7: hard resetting link
[  560.921738] ata7: SATA link down (SStatus 0 SControl 300)
[  561.084295] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
[  561.084300] ata7: irq_stat 0x00400040, connection status changed
[  561.084313] ata7: SError: { PHYRdyChg CommWake DevExch }
[  561.084319] ata7: hard resetting link
[  563.557483] ata7: COMRESET failed (errno=-32)
[  563.557493] ata7: reset failed (errno=-32), retrying in 8 secs
[  571.296786] ata7: hard resetting link
[  573.520599] ata7: COMRESET failed (errno=-32)
[  573.520609] ata7: reset failed (errno=-32), retrying in 8 secs
[  581.536443] ata7: hard resetting link
[  583.796401] ata7: COMRESET failed (errno=-32)
[  583.796410] ata7: reset failed (errno=-32), retrying in 33 secs
[  617.119551] ata7: hard resetting link
[  619.451492] ata7: COMRESET failed (errno=-32)
[  619.451504] ata7: reset failed, giving up
[  619.451559] ata7: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
[  619.451564] ata7: irq_stat 0x00400040, connection status changed
[  619.451567] ata7: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
[  619.451576] ata7: hard resetting link
[  621.711395] ata7: COMRESET failed (errno=-32)
[  621.711405] ata7: reset failed (errno=-32), retrying in 8 secs
[  629.663112] ata7: hard resetting link
[  639.690721] ata7: softreset failed (device not ready)
[  639.690728] ata7: hard resetting link
[  645.442510] ata7: SATA link down (SStatus 0 SControl 310)
[  645.544750] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[  645.544755] ata7: irq_stat 0x00000040, connection status changed
[  645.544757] ata7: SError: { CommWake DevExch }
[  645.544763] ata7: hard resetting link
[  648.026373] ata7: COMRESET failed (errno=-32)
[  648.026382] ata7: reset failed (errno=-32), retrying in 8 secs
[  655.774037] ata7: hard resetting link
[  658.213917] ata7: COMRESET failed (errno=-32)
[  658.213926] ata7: reset failed (errno=-32), retrying in 8 secs
[  666.013543] ata7: hard resetting link
[  679.864896] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  679.980424] scsi 6:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[  680.013141] sd 6:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[  680.013164] sd 6:0:0:0: Attached scsi generic sg8 type 0
[  680.045017] sd 6:0:0:0: [sdh] Attached SCSI disk
[  687.464496] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  687.464503] ata7.00: failed command: SMART
[  687.464509] ata7.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 26
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  687.464512] ata7.00: status: { DRDY }
[  687.464516] ata7: hard resetting link
[  687.944451] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  781.474681] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  781.474688] ata7.00: failed command: SMART
[  781.474694] ata7.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  781.474697] ata7.00: status: { DRDY }
[  781.474701] ata7: hard resetting link
[  781.954650] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  802.465237] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  802.465244] ata7.00: failed command: SMART
[  802.465250] ata7.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 29
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  802.465253] ata7.00: status: { DRDY }
[  802.465257] ata7: hard resetting link
[  803.897133] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=8	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=9	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=11	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=10	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
   1920x1080     60.00*+  59.94    50.00    60.05    60.00    50.04  
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      59.89  
   1440x576      50.00  
   1440x480      59.94  
   1400x1050     59.98  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x720      59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    72.81    59.94    59.93  


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.709] (==) No Layout section.  Using the first Screen section.
[    63.709] (==) No screen section available. Using defaults.
[    63.709] (**) |-->Screen "Default Screen Section" (0)
[    63.709] (**) |   |-->Monitor "<default monitor>"
[    63.710] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    63.713] (--) PCI:*(0:2:0:0) 10de:11c6:1acc:652b rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    63.713] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    63.713] (II) LoadModule: "glx"
[    63.713] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    63.794] (II) LoadModule: "nvidia"
[    63.794] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    63.799] (II) LoadModule: "nouveau"
[    63.800] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    63.801] (II) LoadModule: "modesetting"
[    63.801] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    63.801] (II) LoadModule: "fbdev"
[    63.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    63.801] (II) LoadModule: "vesa"
[    63.801] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    63.809] (II) Loading sub module "fb"
[    63.809] (II) LoadModule: "fb"
[    63.809] (II) Loading /usr/lib/xorg/modules/libfb.so
[    63.810] (II) Loading sub module "wfb"
[    63.810] (II) LoadModule: "wfb"
[    63.810] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    63.810] (II) Loading sub module "ramdac"
[    63.810] (II) LoadModule: "ramdac"
[    63.813] (WW) Falling back to old probe method for modesetting
[    63.813] (WW) Falling back to old probe method for fbdev
[    63.813] (II) Loading sub module "fbdevhw"
[    63.813] (II) LoadModule: "fbdevhw"
[    63.813] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    63.813] (EE) open /dev/fb0: No such file or directory
[    63.813] (WW) Falling back to old probe method for vesa
[    63.813] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    64.141] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    64.148] (II) UnloadModule: "nouveau"
[    64.148] (II) UnloadModule: "modesetting"
[    64.148] (II) UnloadModule: "fbdev"
[    64.148] (II) UnloadModule: "vesa"
[    64.224] (II) Loading sub module "dri2"
[    64.224] (II) LoadModule: "dri2"
[    64.261] (II) LoadModule: "evdev"
[    64.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    64.337] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    64.338] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.
[    64.338] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-49-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-49-generic/updates/dkms
Found nvidia module: nvidia_375.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:11c6
BusID "PCI:2@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================



### ATA disks: sda sdg sdh

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Firmware Version: S8FM07.2
User Capacity:    240 057 409 536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 18:45:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   050    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    1814
 12 Power_Cycle_Count       -O--C-   100   100   000    -    1069
168 Unknown_Attribute       -O--C-   100   100   000    -    498
170 Unknown_Attribute       PO----   100   100   010    -    0
173 Unknown_Attribute       -O--C-   100   100   000    -    1179675
192 Power-Off_Retract_Count -O--C-   100   100   000    -    43
218 Unknown_Attribute       PO-R--   100   100   050    -    0
241 Total_LBAs_Written      -O--C-   100   100   000    -    2318
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdg:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20e21f9b7
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 18:45:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   169   021    -    2175
  4 Start_Stop_Count        -O--CK   100   100   000    -    249
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    213
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    167
192 Power-Off_Retract_Count -O--CK   200   200   000    -    34
193 Load_Cycle_Count        -O--CK   200   200   000    -    446
194 Temperature_Celsius     -O---K   113   110   000    -    30
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 46936 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 46936 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.749  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.749  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE

Error 46935 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]

Error 46934 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE

Error 46933 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE

Error 46932 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.725  SET FEATURES [Enable SATA feature]

# Drive sdh:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 263771310
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Fri May 12 18:45:38 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   185   168   021    -    1741
  4 Start_Stop_Count        -O--CK   100   100   000    -    234
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    219
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    161
192 Power-Off_Retract_Count -O--CK   200   200   000    -    53
193 Load_Cycle_Count        -O--CK   200   200   000    -    435
194 Temperature_Celsius     -O---K   118   112   000    -    25
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 62840 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 62840 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:38:11.425  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.424  IDENTIFY DEVICE
  ef 03 44 00 00 00 a0 08      00:38:11.424  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:38:11.424  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.423  IDENTIFY DEVICE

Error 62839 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 44 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 44 00 00 00 a0 08      00:38:11.424  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:38:11.424  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.423  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:38:05.798  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:05.798  IDENTIFY DEVICE

Error 62838 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:38:11.424  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.423  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:38:05.798  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:05.798  IDENTIFY DEVICE
  ef 03 44 00 00 00 a0 08      00:38:05.798  SET FEATURES [Set transfer mode]

Error 62837 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:38:05.798  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:05.798  IDENTIFY DEVICE
  ef 03 44 00 00 00 a0 08      00:38:05.798  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:38:05.797  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:05.797  IDENTIFY DEVICE

Error 62836 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 44 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 44 00 00 00 a0 08      00:38:05.798  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:38:05.797  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:05.797  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:38:00.120  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:00.119  IDENTIFY DEVICE



### USB disks: sdb sdc sdd sde sdf

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error no medium present

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdd:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sde:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdf:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Merci d'avance pour votre aide smile

Edit : Un autre bisnext alors qu'un disque a bien voulu se monter au redémarrage

May 12 2017, bisnext report id ddadb also available at https://paste.debian.net/932180/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.8.0-49-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
           Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: MAXIMUS V FORMULA v: Rev 1.xx
           BIOS: American Megatrends v: 1604 date: 12/21/2012
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i7-3770 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27341
           clock speeds: min/max: 1600/3900 MHz 1: 3899 MHz 2: 3899 MHz
           3: 3900 MHz 4: 3899 MHz 5: 3899 MHz 6: 3899 MHz 7: 3899 MHz
           8: 3899 MHz
Memory:    Array-1 capacity: 32 GB devices: 4 EC: None
           Device-1: ChannelA-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-2: ChannelA-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-3: ChannelB-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-4: ChannelB-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
Graphics:  Card: NVIDIA GK106 [GeForce GTX 650 Ti]
           bus-ID: 02:00.0 chip-ID: 10de:11c6
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           tty size: 1920x1080@60.00hz
           GLX Renderer: GeForce GTX 650 Ti/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: Yes
Audio:     Card-1 Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
           Card-2 NVIDIA GK106 HDMI Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0e0b
           Sound: Advanced Linux Sound Architecture v: k4.8.0-49-generic
Network:   Card-1: Intel 82579V Gigabit Network Connection
           driver: e1000e v: 3.2.6-k port: f040
           bus-ID: 00:19.0 chip-ID: 8086:1503
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Broadcom BCM43228 802.11a/b/g/n
           driver: bcma-pci-bridge bus-ID: 0c:00.0 chip-ID: 14e4:4359
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 2240.5GB (0.7% used)
           ID-1: /dev/sda model: SPCC_Solid_State size: 240.1GB
           temp: 0C
           ID-2: /dev/sdg model: WDC_WD10EZEX size: 1000.2GB
           temp: 0C
           ID-3: /dev/sdh model: WDC_WD10EZEX size: 1000.2GB
           temp: 30C
           Optical: /dev/sr0 model: ASUS BW-16D1HT
           rev: 1.01 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 218G used: 13G (6%) fs: ext4 dev: /dev/sda5
           label: N/A uuid: 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
           ID-2: /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb size: 917G used: 72M (1%) fs: ext4 dev: /dev/sdh1
           label: Personnel uuid: 80fe17d9-965d-4957-b7aa-555bdf252ccb
           ID-3: swap-1 size: 3.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
           label: N/A uuid: 76f83f3a-02bc-4dc1-8773-2236963b90e3
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 52.0C mobo: 27.8C gpu: 0.0:34C
           Fan Speeds (in rpm): cpu: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 17.6% command: firefox pid: 2647 mem: 354.13MB (1.1%)
           2: cpu: 7.0% command: firefox pid: 2758 mem: 123.46MB (0.3%)
           3: cpu: 6.9% command: steam pid: 2039 mem: 306.61MB (0.9%)
           4: cpu: 3.7% command: Xorg pid: 1149 mem: 81.25MB (0.2%)
           5: cpu: 0.9% command: xfce4-terminal pid: 2801 mem: 24.57MB (0.0%)
           6: cpu: 0.4% command: init pid: 1 mem: 5.81MB (0.0%)
           7: cpu: 0.3% command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1771 mem: 26.71MB (0.0%)
           8: cpu: 0.3% command: xfwm4 pid: 1707 mem: 20.81MB (0.0%)
           9: cpu: 0.2% command: bash pid: 2830 mem: 4.32MB (0.0%)
           10: cpu: 0.2% command: xfdesktop pid: 1715 mem: 43.60MB (0.1%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 354.13MB (1.1%) command: firefox pid: 2647 cpu: 17.6%
           2: mem: 310.33MB (0.9%) command: steam pid: 2039 cpu: 7.0%
           3: mem: 123.46MB (0.3%) command: firefox pid: 2758 cpu: 7.0%
           4: mem: 81.25MB (0.2%) command: Xorg pid: 1149 cpu: 3.7%
           5: mem: 51.96MB (0.1%) command: blueman-applet (started by: python3) pid: 1733 cpu: 0.1%
           6: mem: 43.60MB (0.1%) command: xfdesktop pid: 1715 cpu: 0.2%
           7: mem: 33.44MB (0.1%) command: nm-applet pid: 1721 cpu: 0.0%
           8: mem: 30.61MB (0.0%) command: applet.py (started by: python3) pid: 1732 cpu: 0.1%
           9: mem: 29.57MB (0.0%) command: libindicator-plugin.so (started by: wrapper-2.0) pid: 1782 cpu: 0.0%
           10: mem: 28.47MB (0.0%) command: Thunar pid: 1713 cpu: 0.2%
Info:      Processes: 288 Uptime: 3 min Memory: 1100.6/32118.9MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No known boot loader is installed in the MBR of /dev/sdg.
 => libparted MBR boot code is installed in the MBR of /dev/sdh.

sda1: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sdh1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 223,6 GiB, 240057409536 octets, 468862128 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *    462,612,480   468,860,927     6,248,448  82 Linux swap / Solaris
/dev/sda2               2,046   462,612,479   462,610,434   5 Extended
/dev/sda5               2,048   462,612,479   462,610,432  83 Linux


Drive: sdg _____________________________________________________________________

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

Invalid MBR Signature found.


Drive: sdh _____________________________________________________________________
Disque /dev/sdh : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdh1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        76f83f3a-02bc-4dc1-8773-2236963b90e3   swap       
/dev/sda5        99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c   ext4       
/dev/sdh1        80fe17d9-965d-4957-b7aa-555bdf252ccb   ext4       Personnel

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   12 18:57 ata-ASUS_BW-16D1HT_K9F21113936 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai   12 18:57 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   12 18:57 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   12 18:57 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai   12 18:57 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai   12 18:57 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ -> ../../sdh
lrwxrwxrwx 1 root root 10 mai   12 18:57 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ-part1 -> ../../sdh1
lrwxrwxrwx 1 root root  9 mai   12 18:57 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y3FNHAPY -> ../../sdg
lrwxrwxrwx 1 root root  9 mai   12 18:57 usb-Generic-_Compact_Flash_058F63646476-0:1 -> ../../sdd
lrwxrwxrwx 1 root root  9 mai   12 18:57 usb-Generic-_MS_MS-Pro_058F63646476-0:3 -> ../../sdf
lrwxrwxrwx 1 root root  9 mai   12 18:57 usb-Generic-_SD_MMC_058F63646476-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 mai   12 18:57 usb-Generic-_SM_xD-Picture_058F63646476-0:2 -> ../../sde
lrwxrwxrwx 1 root root  9 mai   12 18:57 wwn-0x50014ee20e21f9b7 -> ../../sdh
lrwxrwxrwx 1 root root 10 mai   12 18:57 wwn-0x50014ee20e21f9b7-part1 -> ../../sdh1
lrwxrwxrwx 1 root root  9 mai   12 18:57 wwn-0x50014ee263771310 -> ../../sdg

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda5        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdh1        /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb            ext4 (rw,nosuid,nodev,relatime,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda5/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
        linux	/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-49-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda5/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda1 during installation
UUID=76f83f3a-02bc-4dc1-8773-2236963b90e3 none            swap    sw              0       0
/dev/sdd /mnt/sdd auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/80fe17d9-965d-4957-b7aa-555bdf252ccb /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda5/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

_________ Devices which don't seem to have a corresponding hard drive: _________

sdc sdd sde sdf 


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 5.641s (kernel) + 9.512s (userspace) = 15.154s


blame, first 10:
udisks2.service                                             18.429s
NetworkManager-wait-online.service                          8.152s
systemd-rfkill.service                                      913ms
mnt-80fe17d9\x2d965d\x2d4957\x2db7aa\x2d555bdf252ccb.mount  835ms
dev-sda5.device                                             499ms
upower.service                                              336ms
grub-common.service                                         307ms
apparmor.service                                            258ms
accounts-daemon.service                                     237ms
apport.service                                              182ms


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @9.484s
  2 multi-user.target @9.484s
  3 teamviewerd.service @9.383s +100ms
  4 network-online.target @9.363s
  5 NetworkManager-wait-online.service @1.211s +8.152s
  6 NetworkManager.service @1.126s +83ms
  7 dbus.service @1.016s
  8 basic.target @1.009s
  9 sockets.target @1.009s
 10 snapd.socket @1.006s +2ms
 11 sysinit.target @1.004s
 12 swap.target @1.004s
 13 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.swap @998ms +4ms
 14 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.device @715ms


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:            31G        751M         29G         41M        1.2G         30G
Swap:          3.0G          0B        3.0G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda5      /                                         ext4  218G   13G  194G   6%    3%
/dev/sdh1      /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb ext4  917G   72M  871G   1%    1%


_________________________________ USB devices __________________________________

Bus 002 Device 005: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 002 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 002 Device 006: ID 043d:00f7 Lexmark International, Inc. InkJet Color Printer
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 001 Device 003: ID 0b05:17b5 ASUSTek Computer, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 6, If 2, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 6: Dev 6, If 0, Class=Vendor Specific Class, Driver=, 480M
        |__ Port 6: Dev 6, If 3, Class=Human Interface Device, Driver=usbhid, 480M
        |__ Port 6: Dev 6, If 1, Class=Printer, Driver=usblp, 480M
        |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=xpad, 12M
            |__ Port 2: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 2, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 3, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 1: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M
        |__ Port 1: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 3: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 480M


_______________________________ Wireless Status _______________________________

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ablk_helper            16384  1 aesni_intel
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
b43                   413696  0
bcma                   61440  1 b43
binfmt_misc            20480  1
bluetooth             557056  39 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  1 btusb
btintel                16384  1 btusb
btrfs                1060864  0
btrtl                  16384  1 btusb
btusb                  45056  0
cfg80211              581632  2 b43,mac80211
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
drm                   368640  5 nvidia_drm,drm_kms_helper
drm_kms_helper        167936  1 nvidia_drm
e1000e                249856  0
edac_core              53248  1 ie31200_edac
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
ff_memless             16384  1 xpad
fjes                   28672  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hfs                    57344  0
hfsplus               106496  0
hid                   122880  3 hid_generic,usbhid
hid_generic            16384  0
ie31200_edac           16384  0
input_leds             16384  0
intel_cstate           16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
joydev                 20480  0
kvm                   598016  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lpc_ich                24576  0
lrw                    16384  1 aesni_intel
mac80211              761856  1 b43
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
minix                  40960  0
msdos                  20480  0
mxm_wmi                16384  0
ntfs                  102400  0
nvidia              12144640  60 nvidia_modeset,nvidia_uvm
nvidia_drm             49152  2
nvidia_modeset        790528  4 nvidia_drm
nvidia_uvm            647168  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
ppdev                  20480  0
pps_core               20480  1 ptp
psmouse               139264  0
ptp                    20480  1 e1000e
qnx4                   16384  0
raid6_pq              102400  1 btrfs
rfcomm                 77824  12
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  5
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
ssb                    65536  1 b43
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tpm_infineon           20480  0
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usblp                  20480  0
usb_storage            73728  1 uas
video                  40960  1 asus_wmi
wmi                    16384  2 asus_wmi,mxm_wmi
x86_pkg_temp_thermal    16384  0
xfs                  1048576  0
xor                    24576  1 btrfs
xpad                   28672  0


______________________________ Additional Drivers _____________________________

== /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0 ==
model    : GK106 [GeForce GTX 650 Ti]
vendor   : NVIDIA Corporation
modalias : pci:v000010DEd000011C6sv00001ACCsd0000652Bbc03sc00i00
driver   : nvidia-375 - distro non-free recommended
driver   : nvidia-340 - distro non-free
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-304 - distro non-free

== /sys/devices/pci0000:00/0000:00:1c.6/0000:05:00.0/0000:06:08.0/0000:0c:00.0 ==
model    : BCM43228 802.11a/b/g/n
vendor   : Broadcom Corporation
modalias : pci:v000014E4d00004359sv00001043sd0000850Cbc02sc80i00
driver   : bcmwl-kernel-source - distro non-free

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr
variant:    oss

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
language-pack-en-base               1:16.04+20160627
language-pack-gnome-en-base         1:16.04+20160627
linux-image-extra-4.4.0-72-generic  4.4.0-72.93
xarchiver                           1:0.5.4-2


Use the following command to clean old configuration files:
sudo apt purge language-pack-en-base language-pack-gnome-en-base linux-image-extra-4.4.0-72-generic xarchiver


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.75.81
linux-generic-hwe-16.04             4.8.0.49.21
linux-headers-4.4.0-75              4.4.0-75.96
linux-headers-4.4.0-75-generic      4.4.0-75.96
linux-headers-4.8.0-46              4.8.0-46.49~16.04.1
linux-headers-4.8.0-46-generic      4.8.0-46.49~16.04.1
linux-headers-4.8.0-49              4.8.0-49.52~16.04.1
linux-headers-4.8.0-49-generic      4.8.0-49.52~16.04.1
linux-headers-generic               4.4.0.75.81
linux-headers-generic-hwe-16.04     4.8.0.49.21
linux-image-4.4.0-72-generic        4.4.0-72.93
linux-image-4.4.0-75-generic        4.4.0-75.96
linux-image-4.8.0-36-generic        4.8.0-36.36~16.04.1
linux-image-4.8.0-46-generic        4.8.0-46.49~16.04.1
linux-image-4.8.0-49-generic        4.8.0-49.52~16.04.1
linux-image-extra-4.4.0-75-generic  4.4.0-75.96
linux-image-extra-4.8.0-36-generic  4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-46-generic  4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-49-generic  4.8.0-49.52~16.04.1
linux-image-generic                 4.4.0.75.81
linux-image-generic-hwe-16.04       4.8.0.49.21


File list in /boot directory:
abi-4.4.0-72-generic
abi-4.4.0-75-generic
abi-4.8.0-36-generic
abi-4.8.0-46-generic
abi-4.8.0-49-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
config-4.8.0-36-generic
config-4.8.0-46-generic
config-4.8.0-49-generic
grub
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-46-generic
initrd.img-4.8.0-49-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
System.map-4.8.0-36-generic
System.map-4.8.0-46-generic
System.map-4.8.0-49-generic
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-49-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-75-generic
4.8.0-49-generic (running kernel)
4.8.0-36-generic

kernel candidates for removal:
4.4.0-72-generic 4.8.0-46-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge   linux-headers-4.4.0-72-generic linux-image-4.4.0-72-generic linux-image-extra-4.4.0-72-generic   linux-headers-4.8.0-46 linux-headers-4.8.0-46-generic linux-image-4.8.0-46-generic linux-image-extra-4.8.0-46-generic  

_________________________________ System Logs ________________________________

Failed services:
  UNIT          LOAD   ACTIVE SUB    DESCRIPTION
● mnt-sdd.mount loaded failed failed /mnt/sdd

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.221437] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.301528] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.301673] SCSI subsystem initialized
[    0.833104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.013529] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.245700] scsi host0: ahci
[    1.245824] scsi host1: ahci
[    1.245976] scsi host2: ahci
[    1.246102] scsi host3: ahci
[    1.246197] scsi host4: ahci
[    1.246251] scsi host5: ahci
[    1.246600] scsi host6: ahci
[    1.246656] scsi host7: ahci
[    1.246982] scsi host8: ahci
[    1.247037] scsi host9: ahci
[    1.559767] ata9: SATA link down (SStatus 0 SControl 300)
[    1.559876] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.563872] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.563875] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff96cfbe0c57a8), AE_NOT_FOUND (20160422/psparse-542)
[    1.564784] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.564791] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff96cfbe0c57a8), AE_NOT_FOUND (20160422/psparse-542)
[    1.578453] scsi 0:0:0:0: CD-ROM            ASUS     BW-16D1HT        1.01 PQ: 0 ANSI: 5
[    1.617281] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.617374] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.617411] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.754807] scsi host10: usb-storage 2-1.6:1.2
[    1.928375] scsi host11: usb-storage 1-1.3:1.0
[    1.931797] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.933507] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.933522] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff96cfbe0db0a0), AE_NOT_FOUND (20160422/psparse-542)
[    1.933855] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.933857] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff96cfbe0db0a0), AE_NOT_FOUND (20160422/psparse-542)
[    1.934092] scsi 3:0:0:0: Direct-Access     ATA      SPCC Solid State 07.2 PQ: 0 ANSI: 5
[    1.965428] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.965444] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.966518] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.279805] ata5: SATA link down (SStatus 0 SControl 300)
[    2.782491] scsi 10:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
[    2.782771] sd 10:0:0:0: Attached scsi generic sg2 type 0
[    2.786979] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[    2.942142] scsi 11:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.942866] scsi 11:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.943422] scsi 11:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.944252] scsi 11:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.944424] sd 11:0:0:0: Attached scsi generic sg3 type 0
[    2.944549] sd 11:0:0:1: Attached scsi generic sg4 type 0
[    2.944647] sd 11:0:0:2: Attached scsi generic sg5 type 0
[    2.944767] sd 11:0:0:3: Attached scsi generic sg6 type 0
[    2.948879] sd 11:0:0:1: [sdd] Attached SCSI removable disk
[    2.949516] sd 11:0:0:2: [sde] Attached SCSI removable disk
[    2.950291] sd 11:0:0:3: [sdf] Attached SCSI removable disk
[    2.976891] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[    3.465333] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.467032] scsi 6:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    3.497469] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.497479] sd 6:0:0:0: Attached scsi generic sg7 type 0
[    3.529011] sd 6:0:0:0: [sdg] Attached SCSI disk
[    3.811803] ata8: SATA link down (SStatus 0 SControl 300)
[    4.285359] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.287009] scsi 9:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    4.317518] sd 9:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.317521] sd 9:0:0:0: Attached scsi generic sg8 type 0
[    4.335086] sd 9:0:0:0: [sdh] Attached SCSI disk
[    5.921635] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    6.018713] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
[    6.018721] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[    6.018724] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[    6.018727] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[    6.018730] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[    6.018732] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[    6.018735] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[    6.131185] audit: type=1400 audit(1494608279.669:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=596 comm="apparmor_parser"
[    6.131193] audit: type=1400 audit(1494608279.669:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=596 comm="apparmor_parser"
[    6.133690] audit: type=1400 audit(1494608279.673:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=599 comm="apparmor_parser"
[    6.145251] audit: type=1400 audit(1494608279.681:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=597 comm="apparmor_parser"
[    6.145865] audit: type=1400 audit(1494608279.685:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=601 comm="apparmor_parser"
[    6.155799] audit: type=1400 audit(1494608279.693:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=598 comm="apparmor_parser"
[    6.155805] audit: type=1400 audit(1494608279.693:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=598 comm="apparmor_parser"
[    6.155809] audit: type=1400 audit(1494608279.693:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=598 comm="apparmor_parser"
[    6.156022] audit: type=1400 audit(1494608279.693:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=593 comm="apparmor_parser"
[    6.156028] audit: type=1400 audit(1494608279.693:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=593 comm="apparmor_parser"
[    6.299752] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[    6.299761] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[    6.299771] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[    6.299775] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[    6.299776] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found
[    6.299778] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
[    6.299779] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[    6.300549] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17b5.hcd failed with error -2
[   14.269710] ata7.00: exception Emask 0x10 SAct 0x0 SErr 0x90002 action 0xe frozen
[   14.269719] ata7: SError: { RecovComm PHYRdyChg 10B8B }
[   14.269722] ata7.00: failed command: SMART
[   14.269727] ata7.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 6
                        res 50/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[   14.269730] ata7.00: status: { DRDY }
[   14.269742] ata7: hard resetting link
[   24.274028] ata7: softreset failed (device not ready)
[   24.274034] ata7: hard resetting link
[   34.330368] ata7: softreset failed (device not ready)
[   34.330373] ata7: hard resetting link
[   69.095478] ata7: softreset failed (1st FIS failed)
[   69.095488] ata7: hard resetting link
[   74.210416] ata7: softreset failed (1st FIS failed)
[   74.210424] ata7: reset failed, giving up
[   74.210916] sd 6:0:0:0: [sdg] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[   95.022380] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   95.022386] ata10.00: failed command: SMART
[   95.022392] ata10.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 9
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   95.022395] ata10.00: status: { DRDY }
[   95.022400] ata10: hard resetting link
[   95.503073] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  212.155744] scsi host10: usb-storage 2-1.6:1.2
[  214.775872] sd 6:0:0:0: [sdg] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  214.775876] blk_update_request: I/O error, dev sdg, sector 1953524992
[  214.775918] sd 6:0:0:0: [sdg] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  214.775921] blk_update_request: I/O error, dev sdg, sector 1953524992
[  214.775923] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  214.969955] sd 6:0:0:0: [sdg] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  214.969960] blk_update_request: I/O error, dev sdg, sector 1953524992
[  214.970004] sd 6:0:0:0: [sdg] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  214.970007] blk_update_request: I/O error, dev sdg, sector 1953524992
[  214.970009] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  215.000838] sd 6:0:0:0: [sdg] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.000843] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.000859] sd 6:0:0:0: [sdg] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.000861] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.000863] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  215.001718] sd 6:0:0:0: [sdg] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.001721] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.001753] sd 6:0:0:0: [sdg] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.001755] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.001757] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  215.002554] sd 6:0:0:0: [sdg] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.002556] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.002586] sd 6:0:0:0: [sdg] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  215.002588] blk_update_request: I/O error, dev sdg, sector 1953524992
[  215.002590] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  215.003578] Buffer I/O error on dev sdg, logical block 0, async page read
[  215.004558] Buffer I/O error on dev sdg, logical block 0, async page read
[  215.004571] Buffer I/O error on dev sdg, logical block 0, async page read
[  215.053183] Buffer I/O error on dev sdg, logical block 244190624, async page read
[  215.203074] Buffer I/O error on dev sdg, logical block 0, async page read


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=8	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=9	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=11	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=10	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
   1920x1080     60.00*+  59.94    50.00    60.05    60.00    50.04  
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      59.89  
   1440x576      50.00  
   1440x480      59.94  
   1400x1050     59.98  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x720      59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    72.81    59.94    59.93  


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.036] (==) No Layout section.  Using the first Screen section.
[     7.036] (==) No screen section available. Using defaults.
[     7.036] (**) |-->Screen "Default Screen Section" (0)
[     7.036] (**) |   |-->Monitor "<default monitor>"
[     7.037] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.042] (--) PCI:*(0:2:0:0) 10de:11c6:1acc:652b rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     7.042] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     7.042] (II) LoadModule: "glx"
[     7.044] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     7.128] (II) LoadModule: "nvidia"
[     7.128] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     7.136] (II) LoadModule: "nouveau"
[     7.137] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     7.140] (II) LoadModule: "modesetting"
[     7.140] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.141] (II) LoadModule: "fbdev"
[     7.141] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.141] (II) LoadModule: "vesa"
[     7.141] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.143] (II) Loading sub module "fb"
[     7.143] (II) LoadModule: "fb"
[     7.144] (II) Loading /usr/lib/xorg/modules/libfb.so
[     7.145] (II) Loading sub module "wfb"
[     7.145] (II) LoadModule: "wfb"
[     7.145] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     7.146] (II) Loading sub module "ramdac"
[     7.146] (II) LoadModule: "ramdac"
[     7.149] (WW) Falling back to old probe method for modesetting
[     7.149] (WW) Falling back to old probe method for fbdev
[     7.149] (II) Loading sub module "fbdevhw"
[     7.149] (II) LoadModule: "fbdevhw"
[     7.149] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.150] (WW) Falling back to old probe method for vesa
[     7.150] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.478] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     7.485] (II) UnloadModule: "nouveau"
[     7.485] (II) UnloadModule: "modesetting"
[     7.485] (II) UnloadModule: "fbdev"
[     7.485] (II) UnloadModule: "vesa"
[     7.576] (II) Loading sub module "dri2"
[     7.576] (II) LoadModule: "dri2"
[     7.635] (II) LoadModule: "evdev"
[     7.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.713] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     7.714] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.
[     7.714] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-49-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-49-generic/updates/dkms
Found nvidia module: nvidia_375.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:11c6
BusID "PCI:2@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================



### ATA disks: sda sdg sdh

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Firmware Version: S8FM07.2
User Capacity:    240 057 409 536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 19:01:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   050    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    1814
 12 Power_Cycle_Count       -O--C-   100   100   000    -    1069
168 Unknown_Attribute       -O--C-   100   100   000    -    507
170 Unknown_Attribute       PO----   100   100   010    -    0
173 Unknown_Attribute       -O--C-   100   100   000    -    1179675
192 Power-Off_Retract_Count -O--C-   100   100   000    -    43
218 Unknown_Attribute       PO-R--   100   100   050    -    0
241 Total_LBAs_Written      -O--C-   100   100   000    -    2319
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdg:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Short INQUIRY response, skip product id
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdh:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20e21f9b7
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 19:01:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   169   021    -    2175
  4 Start_Stop_Count        -O--CK   100   100   000    -    249
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    214
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    167
192 Power-Off_Retract_Count -O--CK   200   200   000    -    34
193 Load_Cycle_Count        -O--CK   200   200   000    -    446
194 Temperature_Celsius     -O---K   113   110   000    -    30
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 46936 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 46936 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.749  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.749  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE

Error 46935 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]

Error 46934 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE

Error 46933 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE

Error 46932 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.725  SET FEATURES [Enable SATA feature]



### USB disks: sdc sdd sde sdf

# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdd:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sde:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdf:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.




=============================== StdErr Messages ===============================

hexdump: /dev/sdg: Erreur d'entrée/sortie
hexdump: /dev/sdg: Erreur d'entrée/sortie
hexdump: /dev/sdg: Erreur d'entrée/sortie

https://paste.debian.net/932180/


Edit 2 : Bios en mode IDE au lieu de AHCI : https://paste.debian.net/932183/

May 12 2017, bisnext report id d1401 also available at https://paste.debian.net/932183/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.8.0-49-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
           Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: MAXIMUS V FORMULA v: Rev 1.xx
           BIOS: American Megatrends v: 1604 date: 12/21/2012
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i7-3770 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27340
           clock speeds: min/max: 1600/3900 MHz 1: 3260 MHz 2: 3088 MHz
           3: 3413 MHz 4: 3346 MHz 5: 3522 MHz 6: 2989 MHz 7: 3277 MHz
           8: 3696 MHz
Memory:    Array-1 capacity: 32 GB devices: 4 EC: None
           Device-1: ChannelA-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-2: ChannelA-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-3: ChannelB-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
           Device-4: ChannelB-DIMM1 size: 8 GB speed: 1333 MHz type: DDR3
           manufacturer: Kingston part: KHX2400C11D3/8GX
Graphics:  Card: NVIDIA GK106 [GeForce GTX 650 Ti]
           bus-ID: 02:00.0 chip-ID: 10de:11c6
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           tty size: 1920x1080@60.00hz
           GLX Renderer: GeForce GTX 650 Ti/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: Yes
Audio:     Card-1 Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
           Card-2 NVIDIA GK106 HDMI Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0e0b
           Sound: Advanced Linux Sound Architecture v: k4.8.0-49-generic
Network:   Card-1: Intel 82579V Gigabit Network Connection
           driver: e1000e v: 3.2.6-k port: f040
           bus-ID: 00:19.0 chip-ID: 8086:1503
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Broadcom BCM43228 802.11a/b/g/n
           driver: bcma-pci-bridge bus-ID: 0c:00.0 chip-ID: 14e4:4359
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 1240.3GB (1.3% used)
           ID-1: /dev/sda model: SPCC_Solid_State size: 240.1GB
           temp: 0C
           ID-2: /dev/sdg model: WDC_WD10EZEX size: 1000.2GB
           temp: 31C
           Optical: /dev/sr0 model: ASUS BW-16D1HT
           rev: 1.01 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 218G used: 13G (6%) fs: ext4 dev: /dev/sda5
           label: N/A uuid: 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
           ID-2: /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb size: 917G used: 72M (1%) fs: ext4 dev: /dev/sdg1
           label: Personnel uuid: 80fe17d9-965d-4957-b7aa-555bdf252ccb
           ID-3: swap-1 size: 3.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
           label: N/A uuid: 76f83f3a-02bc-4dc1-8773-2236963b90e3
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:34C
           Fan Speeds (in rpm): cpu: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 19.6% command: firefox pid: 1950 mem: 356.51MB (1.1%)
           2: cpu: 6.2% command: firefox pid: 2061 mem: 122.66MB (0.3%)
           3: cpu: 3.6% command: Xorg pid: 1144 mem: 78.99MB (0.2%)
           4: cpu: 1.1% command: xfce4-terminal pid: 2107 mem: 24.59MB (0.0%)
           5: cpu: 0.5% command: bash pid: 2124 mem: 4.34MB (0.0%)
           6: cpu: 0.5% command: init pid: 1 mem: 5.77MB (0.0%)
           7: cpu: 0.3% command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1724 mem: 26.81MB (0.0%)
           8: cpu: 0.3% command: blueman-applet (started by: python3) pid: 1679 mem: 51.95MB (0.1%)
           9: cpu: 0.3% command: xfdesktop pid: 1666 mem: 41.72MB (0.1%)
           10: cpu: 0.3% daemon: ~scsi_eh_6~ pid: 224 mem: 0.00MB (0.0%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 356.51MB (1.1%) command: firefox pid: 1950 cpu: 19.6%
           2: mem: 122.66MB (0.3%) command: firefox pid: 2061 cpu: 6.2%
           3: mem: 78.99MB (0.2%) command: Xorg pid: 1144 cpu: 3.6%
           4: mem: 51.95MB (0.1%) command: blueman-applet (started by: python3) pid: 1679 cpu: 0.3%
           5: mem: 41.72MB (0.1%) command: xfdesktop pid: 1666 cpu: 0.3%
           6: mem: 33.41MB (0.1%) command: nm-applet pid: 1670 cpu: 0.1%
           7: mem: 30.46MB (0.0%) command: applet.py (started by: python3) pid: 1678 cpu: 0.2%
           8: mem: 29.90MB (0.0%) command: libindicator-plugin.so (started by: wrapper-2.0) pid: 1735 cpu: 0.1%
           9: mem: 27.82MB (0.0%) command: Thunar pid: 1664 cpu: 0.1%
           10: mem: 26.81MB (0.0%) command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1724 cpu: 0.3%
Info:      Processes: 283 Uptime: 2 min Memory: 770.9/32118.9MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => libparted MBR boot code is installed in the MBR of /dev/sdg.

sda1: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sdg1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 223,6 GiB, 240057409536 octets, 468862128 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *    462,612,480   468,860,927     6,248,448  82 Linux swap / Solaris
/dev/sda2               2,046   462,612,479   462,610,434   5 Extended
/dev/sda5               2,048   462,612,479   462,610,432  83 Linux


Drive: sdg _____________________________________________________________________
Disque /dev/sdg : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdg1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        76f83f3a-02bc-4dc1-8773-2236963b90e3   swap       
/dev/sda5        99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c   ext4       
/dev/sdg1        80fe17d9-965d-4957-b7aa-555bdf252ccb   ext4       Personnel

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   12 19:12 ata-ASUS_BW-16D1HT_K9F21113936 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai   12 19:12 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   12 19:12 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   12 19:12 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai   12 19:12 ata-SPCC_Solid_State_Disk_DCA9074719EE00005165-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai   12 19:12 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ -> ../../sdg
lrwxrwxrwx 1 root root 10 mai   12 19:12 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1UF8DEZ-part1 -> ../../sdg1
lrwxrwxrwx 1 root root  9 mai   12 19:12 usb-Generic-_Compact_Flash_058F63646476-0:1 -> ../../sdd
lrwxrwxrwx 1 root root  9 mai   12 19:12 usb-Generic-_MS_MS-Pro_058F63646476-0:3 -> ../../sdf
lrwxrwxrwx 1 root root  9 mai   12 19:12 usb-Generic-_SD_MMC_058F63646476-0:0 -> ../../sdc
lrwxrwxrwx 1 root root  9 mai   12 19:12 usb-Generic-_SM_xD-Picture_058F63646476-0:2 -> ../../sde
lrwxrwxrwx 1 root root  9 mai   12 19:12 usb-Lexmar_USB_Mass_Storage_22N0180150026W3-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 mai   12 19:12 wwn-0x50014ee20e21f9b7 -> ../../sdg
lrwxrwxrwx 1 root root 10 mai   12 19:12 wwn-0x50014ee20e21f9b7-part1 -> ../../sdg1

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda5        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdg1        /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb            ext4 (rw,nosuid,nodev,relatime,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda5/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
        linux	/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-49-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	else
	  search --no-floppy --fs-uuid --set=root 99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda5/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda1 during installation
UUID=76f83f3a-02bc-4dc1-8773-2236963b90e3 none            swap    sw              0       0
/dev/sdd /mnt/sdd auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/80fe17d9-965d-4957-b7aa-555bdf252ccb /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda5/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

_________ Devices which don't seem to have a corresponding hard drive: _________

sdb sdc sdd sde sdf 


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic root=UUID=99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 1min 2.319s (kernel) + 9.830s (userspace) = 1min 12.150s


blame, first 10:
NetworkManager-wait-online.service                                                    8.406s
udev-configure-printer@-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.6.service  6.592s
dev-sda5.device                                                                       926ms
systemd-rfkill.service                                                                880ms
upower.service                                                                        630ms
mnt-80fe17d9\x2d965d\x2d4957\x2db7aa\x2d555bdf252ccb.mount                            295ms
ModemManager.service                                                                  227ms
accounts-daemon.service                                                               213ms
apparmor.service                                                                      195ms
NetworkManager.service                                                                175ms


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @9.800s
  2 multi-user.target @9.800s
  3 teamviewerd.service @9.704s +95ms
  4 network-online.target @9.683s
  5 NetworkManager-wait-online.service @1.276s +8.406s
  6 NetworkManager.service @1.076s +175ms
  7 dbus.service @1.059s
  8 basic.target @1.058s
  9 sockets.target @1.058s
 10 snapd.socket @1.057s +788us
 11 sysinit.target @1.054s
 12 swap.target @1.048s
 13 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.swap @1.041s +6ms
 14 dev-disk-by\x2duuid-76f83f3a\x2d02bc\x2d4dc1\x2d8773\x2d2236963b90e3.device @1.038s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:            31G        700M         30G         41M        617M         30G
Swap:          3.0G          0B        3.0G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda5      /                                         ext4  218G   13G  194G   6%    3%
/dev/sdg1      /mnt/80fe17d9-965d-4957-b7aa-555bdf252ccb ext4  917G   72M  871G   1%    1%


_________________________________ USB devices __________________________________

Bus 002 Device 005: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 002 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 002 Device 003: ID 043d:00f7 Lexmark International, Inc. InkJet Color Printer
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 001 Device 003: ID 0b05:17b5 ASUSTek Computer, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 3, If 2, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
        |__ Port 6: Dev 3, If 3, Class=Human Interface Device, Driver=usbhid, 480M
        |__ Port 6: Dev 3, If 1, Class=Printer, Driver=usblp, 480M
        |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=xpad, 12M
            |__ Port 2: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 2, Class=Vendor Specific Class, Driver=, 12M
            |__ Port 2: Dev 5, If 3, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 1: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M
        |__ Port 1: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
        |__ Port 3: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 480M


_______________________________ Wireless Status _______________________________

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ablk_helper            16384  1 aesni_intel
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
b43                   413696  0
bcma                   61440  1 b43
binfmt_misc            20480  1
bluetooth             557056  39 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  1 btusb
btintel                16384  1 btusb
btrfs                1060864  0
btrtl                  16384  1 btusb
btusb                  45056  0
cfg80211              581632  2 b43,mac80211
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
drm                   368640  5 nvidia_drm,drm_kms_helper
drm_kms_helper        167936  1 nvidia_drm
e1000e                249856  0
edac_core              53248  1 ie31200_edac
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
ff_memless             16384  1 xpad
fjes                   28672  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hfs                    57344  0
hfsplus               106496  0
hid                   122880  3 hid_generic,usbhid
hid_generic            16384  0
ie31200_edac           16384  0
input_leds             16384  0
intel_cstate           16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
joydev                 20480  0
kvm                   598016  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lpc_ich                24576  0
lrw                    16384  1 aesni_intel
mac80211              761856  1 b43
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
minix                  40960  0
msdos                  20480  0
mxm_wmi                16384  0
ntfs                  102400  0
nvidia              12144640  43 nvidia_modeset,nvidia_uvm
nvidia_drm             49152  2
nvidia_modeset        790528  3 nvidia_drm
nvidia_uvm            647168  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
ppdev                  20480  0
pps_core               20480  1 ptp
psmouse               139264  0
ptp                    20480  1 e1000e
qnx4                   16384  0
raid6_pq              102400  1 btrfs
rfcomm                 77824  12
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  5
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
ssb                    65536  1 b43
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tpm_infineon           20480  0
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usblp                  20480  0
usb_storage            73728  1 uas
video                  40960  1 asus_wmi
wmi                    16384  2 asus_wmi,mxm_wmi
x86_pkg_temp_thermal    16384  0
xfs                  1048576  0
xor                    24576  1 btrfs
xpad                   28672  0


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:1c.6/0000:05:00.0/0000:06:08.0/0000:0c:00.0 ==
model    : BCM43228 802.11a/b/g/n
modalias : pci:v000014E4d00004359sv00001043sd0000850Cbc02sc80i00
vendor   : Broadcom Corporation
driver   : bcmwl-kernel-source - distro non-free

== /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0 ==
model    : GK106 [GeForce GTX 650 Ti]
modalias : pci:v000010DEd000011C6sv00001ACCsd0000652Bbc03sc00i00
vendor   : NVIDIA Corporation
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-304 - distro non-free
driver   : nvidia-375 - distro non-free recommended
driver   : nvidia-340 - distro non-free



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr
variant:    oss

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
language-pack-en-base               1:16.04+20160627
language-pack-gnome-en-base         1:16.04+20160627
linux-image-extra-4.4.0-72-generic  4.4.0-72.93
xarchiver                           1:0.5.4-2


Use the following command to clean old configuration files:
sudo apt purge language-pack-en-base language-pack-gnome-en-base linux-image-extra-4.4.0-72-generic xarchiver


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.75.81
linux-generic-hwe-16.04             4.8.0.49.21
linux-headers-4.4.0-75              4.4.0-75.96
linux-headers-4.4.0-75-generic      4.4.0-75.96
linux-headers-4.8.0-46              4.8.0-46.49~16.04.1
linux-headers-4.8.0-46-generic      4.8.0-46.49~16.04.1
linux-headers-4.8.0-49              4.8.0-49.52~16.04.1
linux-headers-4.8.0-49-generic      4.8.0-49.52~16.04.1
linux-headers-generic               4.4.0.75.81
linux-headers-generic-hwe-16.04     4.8.0.49.21
linux-image-4.4.0-72-generic        4.4.0-72.93
linux-image-4.4.0-75-generic        4.4.0-75.96
linux-image-4.8.0-36-generic        4.8.0-36.36~16.04.1
linux-image-4.8.0-46-generic        4.8.0-46.49~16.04.1
linux-image-4.8.0-49-generic        4.8.0-49.52~16.04.1
linux-image-extra-4.4.0-75-generic  4.4.0-75.96
linux-image-extra-4.8.0-36-generic  4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-46-generic  4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-49-generic  4.8.0-49.52~16.04.1
linux-image-generic                 4.4.0.75.81
linux-image-generic-hwe-16.04       4.8.0.49.21


File list in /boot directory:
abi-4.4.0-72-generic
abi-4.4.0-75-generic
abi-4.8.0-36-generic
abi-4.8.0-46-generic
abi-4.8.0-49-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
config-4.8.0-36-generic
config-4.8.0-46-generic
config-4.8.0-49-generic
grub
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-46-generic
initrd.img-4.8.0-49-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
System.map-4.8.0-36-generic
System.map-4.8.0-46-generic
System.map-4.8.0-49-generic
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-49-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-75-generic
4.8.0-49-generic (running kernel)
4.8.0-36-generic

kernel candidates for removal:
4.4.0-72-generic 4.8.0-46-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge   linux-headers-4.4.0-72-generic linux-image-4.4.0-72-generic linux-image-extra-4.4.0-72-generic   linux-headers-4.8.0-46 linux-headers-4.8.0-46-generic linux-image-4.8.0-46-generic linux-image-extra-4.8.0-46-generic  

_________________________________ System Logs ________________________________

Failed services:
  UNIT          LOAD   ACTIVE SUB    DESCRIPTION
● mnt-sdd.mount loaded failed failed /mnt/sdd

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.226107] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.306193] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.306338] SCSI subsystem initialized
[    0.838130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.017172] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.250447] scsi host0: ahci
[    1.250636] scsi host1: ahci
[    1.250813] scsi host2: ahci
[    1.250893] scsi host3: ahci
[    1.250964] scsi host4: ahci
[    1.251034] scsi host5: ahci
[    1.251486] scsi host6: ahci
[    1.251590] scsi host7: ahci
[    1.251999] scsi host8: ahci
[    1.252069] scsi host9: ahci
[    1.564557] ata9: SATA link down (SStatus 0 SControl 300)
[    1.564567] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.568565] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.568568] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88e8be0c5c80), AE_NOT_FOUND (20160422/psparse-542)
[    1.569740] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.569755] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88e8be0c5c80), AE_NOT_FOUND (20160422/psparse-542)
[    1.576804] scsi 0:0:0:0: CD-ROM            ASUS     BW-16D1HT        1.01 PQ: 0 ANSI: 5
[    1.618117] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.618242] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.618315] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.759923] scsi host10: usb-storage 2-1.6:1.2
[    1.936526] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.938260] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.938263] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88e8be0dbbe0), AE_NOT_FOUND (20160422/psparse-542)
[    1.938648] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.938660] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88e8be0dbbe0), AE_NOT_FOUND (20160422/psparse-542)
[    1.938900] scsi 3:0:0:0: Direct-Access     ATA      SPCC Solid State 07.2 PQ: 0 ANSI: 5
[    1.945228] scsi host11: usb-storage 1-1.3:1.0
[    1.982177] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.982179] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.983631] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.296552] ata5: SATA link down (SStatus 0 SControl 300)
[    2.783552] scsi 10:0:0:0: Direct-Access     Lexmar   USB Mass Storage  200 PQ: 0 ANSI: 0
[    2.783767] sd 10:0:0:0: Attached scsi generic sg2 type 0
[    2.786791] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[    2.975060] scsi 11:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.975789] scsi 11:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.976354] scsi 11:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.977176] scsi 11:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.977394] sd 11:0:0:0: Attached scsi generic sg3 type 0
[    2.977509] sd 11:0:0:1: Attached scsi generic sg4 type 0
[    2.977640] sd 11:0:0:2: Attached scsi generic sg5 type 0
[    2.977758] sd 11:0:0:3: Attached scsi generic sg6 type 0
[    2.981073] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[    2.981698] sd 11:0:0:1: [sdd] Attached SCSI removable disk
[    3.011219] sd 11:0:0:2: [sde] Attached SCSI removable disk
[    3.011986] sd 11:0:0:3: [sdf] Attached SCSI removable disk
[   11.251127] ata7: softreset failed (1st FIS failed)
[   21.252316] ata7: softreset failed (1st FIS failed)
[   56.254202] ata7: softreset failed (1st FIS failed)
[   61.254970] ata7: softreset failed (1st FIS failed)
[   61.254977] ata7: reset failed, giving up
[   61.569063] ata8: SATA link down (SStatus 0 SControl 300)
[   62.042658] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   62.044280] scsi 9:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[   62.082826] sd 9:0:0:0: Attached scsi generic sg7 type 0
[   62.082842] sd 9:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[   62.107753] sd 9:0:0:0: [sdg] Attached SCSI disk
[   62.626206] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   62.711415] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
[   62.711422] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.711424] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.711426] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.711428] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.711430] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[   62.711431] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
[   62.789777] audit: type=1400 audit(1494609176.318:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=633 comm="apparmor_parser"
[   62.789782] audit: type=1400 audit(1494609176.318:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=633 comm="apparmor_parser"
[   62.792228] audit: type=1400 audit(1494609176.322:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=629 comm="apparmor_parser"
[   62.792232] audit: type=1400 audit(1494609176.322:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=629 comm="apparmor_parser"
[   62.796768] audit: type=1400 audit(1494609176.326:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
[   62.796774] audit: type=1400 audit(1494609176.326:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
[   62.796777] audit: type=1400 audit(1494609176.326:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=630 comm="apparmor_parser"
[   62.796781] audit: type=1400 audit(1494609176.326:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
[   62.797923] audit: type=1400 audit(1494609176.326:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=634 comm="apparmor_parser"
[   62.800280] audit: type=1400 audit(1494609176.330:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=640 comm="apparmor_parser"
[   62.975392] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17b5.hcd failed with error -2
[   62.984386] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   62.984392] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   62.984399] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   62.984403] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   62.984403] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found
[   62.984406] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
[   62.984406] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=8	[slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                   	id=9	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=11	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v7.0	id=10	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
   1920x1080     60.00*+  59.94    50.00    60.05    60.00    50.04  
   1680x1050     59.95  
   1600x1200     60.00  
   1440x900      59.89  
   1440x576      50.00  
   1440x480      59.94  
   1400x1050     59.98  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x720      59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    72.81    59.94    59.93  


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    63.657] (==) No Layout section.  Using the first Screen section.
[    63.657] (==) No screen section available. Using defaults.
[    63.657] (**) |-->Screen "Default Screen Section" (0)
[    63.657] (**) |   |-->Monitor "<default monitor>"
[    63.658] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    63.660] (--) PCI:*(0:2:0:0) 10de:11c6:1acc:652b rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    63.660] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    63.660] (II) LoadModule: "glx"
[    63.660] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    63.730] (II) LoadModule: "nvidia"
[    63.730] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    63.735] (II) LoadModule: "nouveau"
[    63.735] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    63.736] (II) LoadModule: "modesetting"
[    63.737] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    63.737] (II) LoadModule: "fbdev"
[    63.737] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    63.737] (II) LoadModule: "vesa"
[    63.737] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    63.739] (II) Loading sub module "fb"
[    63.739] (II) LoadModule: "fb"
[    63.739] (II) Loading /usr/lib/xorg/modules/libfb.so
[    63.740] (II) Loading sub module "wfb"
[    63.740] (II) LoadModule: "wfb"
[    63.740] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    63.740] (II) Loading sub module "ramdac"
[    63.740] (II) LoadModule: "ramdac"
[    63.743] (WW) Falling back to old probe method for modesetting
[    63.743] (WW) Falling back to old probe method for fbdev
[    63.743] (II) Loading sub module "fbdevhw"
[    63.743] (II) LoadModule: "fbdevhw"
[    63.743] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    63.743] (WW) Falling back to old probe method for vesa
[    63.743] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    64.057] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    64.064] (II) UnloadModule: "nouveau"
[    64.064] (II) UnloadModule: "modesetting"
[    64.064] (II) UnloadModule: "fbdev"
[    64.064] (II) UnloadModule: "vesa"
[    64.157] (II) Loading sub module "dri2"
[    64.157] (II) LoadModule: "dri2"
[    64.195] (II) LoadModule: "evdev"
[    64.195] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    64.269] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    64.270] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.
[    64.271] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v7.0: ignoring absolute axes.


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-49-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-49-generic/updates/dkms
Found nvidia module: nvidia_375.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:11c6
BusID "PCI:2@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================



### ATA disks: sda sdg

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Firmware Version: S8FM07.2
User Capacity:    240 057 409 536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 19:14:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   050    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    1814
 12 Power_Cycle_Count       -O--C-   100   100   000    -    1069
168 Unknown_Attribute       -O--C-   100   100   000    -    525
170 Unknown_Attribute       PO----   100   100   010    -    0
173 Unknown_Attribute       -O--C-   100   100   000    -    1179675
192 Power-Off_Retract_Count -O--C-   100   100   000    -    43
218 Unknown_Attribute       PO-R--   100   100   050    -    0
241 Total_LBAs_Written      -O--C-   100   100   000    -    2319
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdg:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20e21f9b7
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 19:14:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   169   021    -    2175
  4 Start_Stop_Count        -O--CK   100   100   000    -    249
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    214
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    167
192 Power-Off_Retract_Count -O--CK   200   200   000    -    34
193 Load_Cycle_Count        -O--CK   200   200   000    -    446
194 Temperature_Celsius     -O---K   112   110   000    -    31
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 46936 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 46936 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.749  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.749  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE

Error 46935 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.749  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]

Error 46934 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.748  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.748  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE

Error 46933 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:06:46.737  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE

Error 46932 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 45 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 45 00 00 00 a0 08      00:06:46.737  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:06:46.736  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:06:46.736  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 08      00:06:46.725  SET FEATURES [Enable SATA feature]



### USB disks: sdb sdc sdd sde sdf

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error no medium present

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdd:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sde:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdf:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Dernière modification par Caribou22 (Le 12/05/2017, à 18:15)

Hors ligne

#2 Le 12/05/2017, à 17:56

Bougron

Re : Deux disques durs internes non-détectés

Bonsoir.
Tes deux disques sont parfaitement visibles a la fin du rapport bisnext
Ce sont les disques SDG et SDH
Mais ils tous le deux une collection faramineuse d'erreur de même nature

  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 08      00:38:11.425  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.424  IDENTIFY DEVICE
  ef 03 44 00 00 00 a0 08      00:38:11.424  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08      00:38:11.424  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 08      00:38:11.423  IDENTIFY DEVICE

Error 62839 occurred at disk power-on lifetime: 219 hours (9 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

Ils semblent de pas supporter le mode SATA

Hors ligne

#3 Le 12/05/2017, à 18:04

Caribou22

Re : Deux disques durs internes non-détectés

Merci pour ta réponse rapide smile

Donc :
- J'ai un disque qui s'est monté au redémarrage. J'ai refait un rapport que j'ai mis dans mon premier message.
- Il faudrait donc que je passe en mode IDE dans le BIOS ? (là c'est en AHCI je crois)

Hors ligne

#4 Le 12/05/2017, à 19:10

Bougron

Re : Deux disques durs internes non-détectés

Tu peux tenter le mode IDE au lieu de AHCI

Tes deux disques sont parfaitement sains hormis ce problème de détection.
exemple pour l'un.   Tout est quasiment a zero  dans les zones importantes

# Drive sdg:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20e21f9b7
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri May 12 19:14:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   169   021    -    2175
  4 Start_Stop_Count        -O--CK   100   100   000    -    249
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    214
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    167
192 Power-Off_Retract_Count -O--CK   200   200   000    -    34
193 Load_Cycle_Count        -O--CK   200   200   000    -    446
194 Temperature_Celsius     -O---K   112   110   000    -    31
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 46936 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 46936 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   169   021    -    2175
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0

Dernière modification par Bougron (Le 12/05/2017, à 19:15)

Hors ligne

#5 Le 12/05/2017, à 20:19

Caribou22

Re : Deux disques durs internes non-détectés

J'ai testé en mode IDE. J'ai mis le rapport dans mon premier post à la fin smile

Ça n'a rien changé hmm
J'ajoute que quand le HDD n'est pas détecté dans Thunar, il y a des bruits louches qui s'échappent de la tour...

Hors ligne

#6 Le 12/05/2017, à 21:57

Bougron

Re : Deux disques durs internes non-détectés

Désolé, il y a un truc que je ne comprends pas
Dans le premier rapport on voit que les deux disques sont bien délectés

### ATA disks: sda sdg sdh

Dans le dernier, on voit que seulement un des deux est bien détecté

Drive: sdg _____________________________________________________________________
Disque /dev/sdg : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
/dev/sdg1               2,048 1,953,523,711 1,953,521,664  83 Linux
"blkid" output: ________________________________________________________________
Device           UUID                                   TYPE       LABEL  
/dev/sdg1        80fe17d9-965d-4957-b7aa-555bdf252ccb   ext4       Personnel
# Drive sdg:
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20e21f9b7
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]]
ATA Version is:   ACS-3 T13/2161-D revision 3b

SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
   9 Power_On_Hours          -O--CK   100   100   000    -    214

Error 46936 occurred at disk power-on lifetime: 213 hours (8 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

Il semble que tu devrais pouvoir l'utiliser.   Merci de confirmer

Pour l'autre disque, Il me semble que c'est celui-ci

# Drive sdh:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 263771310
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)

ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  9 Power_On_Hours          -O--CK   100   100   000    -    219

Il est possible que tu puisses l'identifier si sa référence exacte est écrite dessus.
LU WWN Device Id: 5 0014ee  263771310
Mais je ne comprends pas ce qui se passe: Dans la seconde configuration, tes deux disques auraient dus être vus par gparted car ils sont détectés   SDH n'ayant probablement plus de table de partition.

"blkid" output: ________________________________________________________________
Device           UUID                                   TYPE       LABEL
/dev/sda1        76f83f3a-02bc-4dc1-8773-2236963b90e3   swap       
/dev/sda5        99d6288d-6b1b-47d4-b6e2-0c8a170c7f2c   ext4       
/dev/sdg1        80fe17d9-965d-4957-b7aa-555bdf252ccb   ext4       Personnel
/dev/sdh

Dernière modification par Bougron (Le 12/05/2017, à 21:59)

Hors ligne

#7 Le 13/05/2017, à 04:40

Laurent85

Re : Deux disques durs internes non-détectés

Bonjour, il y a de nombreux messages d'erreurs dans le journal système, envoie les journal complet. Redémarre normalement, ouvre ta session puis un terminal, envoie le journal et donne le lien :

sudo dmesg | pastebinit -b paste.debian.net

Hors ligne

#8 Le 13/05/2017, à 20:54

Bougron

Re : Deux disques durs internes non-détectés

Merci Laurent85 de ton aide.

Hors ligne