#1 Le 28/04/2017, à 04:20
- Ceedjee
Bug graphique après MAJ vers Ubuntu 17.04
Bonsoir,
Depuis que j'ai mis mon ordinateur à jour vers la dernière version d'Ubuntu, j'ai par moment un petit problème d'affichage, ce n'est pas gênant en générale, mettre une fenêtre en pleine écran suffit à faire cesser les clignotements.
Mais lorsque j'ouvre Blender (pour le moment, c'est le seul logiciel qui soit vraiment affecté), ce problème est bien plus gênant j'ai fais une petite vidéo du problème. YouTube refuse d'uploader la vidéo, du coup j'ai mis le fichier sur le 1er hébergeur de fichier que j'ai croisé.
En fonction des zones que traverse la souris, sa clignote de partout.
J'ai cherché un peu pour voir si je pouvais mettre à jour le driver, j'ai été surpris de voir qu'AMD à un driver pour Ubuntu 16.04 (je pensais qu'AMD avais abandonné le développement du driver pour Linux). J'ai téléchargé et installé ce driver, mais après avoir redémarré, le bureau ne voulais plus se lancer. Il voulais s'ouvrir en réinitialisant la configuration graphique (ou un truc du genre), mais la souris ne s'affichais pas, et la navigation au clavier ne marchais pas ... J'ai finalement démarrer en mode de récupération et lancé le terminal root, et remonter la partition en lecture/écriture pour finalement désintaller le drivers. Le PC était a nouveau fonctionnelle. En passant, pourquoi ce terminal est en lecture seul par défaut ? j'ai pas bien compris la logique vuq u'il est très facile de remonter la partition en écriture ...
Bref, à part essayer de mettre à jour le drivers, je ne sais pas trop quoi faire.
La vidéo : https://www.petit-fichier.fr/2017/04/28/video/
Mon PC :
Carte mère : AsRock G41C-GS
Processeur : Core 2 Quad Q9300 (2,5Ghz)
Carte graphique : Radeon HD 7850
RAM : 4Go
Dernière modification par Ceedjee (Le 28/04/2017, à 04:35)
Hors ligne
#2 Le 28/04/2017, à 10:53
- malbo
Re : Bug graphique après MAJ vers Ubuntu 17.04
Bonjour,
Depuis une session de ton Ubuntu installé, je te prie de faire un bisnext et de donner le lien vers ce rapport bisnext dans ta réponse (donne le lien, ne colle pas le rapport lui-même dans ta réponse).
Dernière modification par malbo (Le 28/04/2017, à 11:03)
Hors ligne
#3 Le 28/04/2017, à 17:09
- Ceedjee
Re : Bug graphique après MAJ vers Ubuntu 17.04
Le rapport : http://paste.debian.net/929894/
Hors ligne
#4 Le 29/04/2017, à 10:29
- Laurent85
Re : Bug graphique après MAJ vers Ubuntu 17.04
Bonjour, c'est une mauvaise prise en charge de la puce graphique par le pilote radeon de la version 17.04
Si tu n'as pas de raison spécifique d'installer la version 17.04 il y a peu d'intérêt de l'installer sinon d'essuyer les plâtres comme dans toute nouvelle version non LTS. Les versions intermédiaires ne sont en plus maintenues que 9 mois, tu va passer ton temps à déboguer et rapidement nécessiter de mettre à niveau vers la version suivante en raison de la fin de vie de la version 17.04.
Sauvegarde tes données et installe la dernière version 16.04.2 LTS (Long Term Support, maintenue jusqu'en avril 2021), le pilote libre fonctionnait mieux sur cette version d'après ton retour, de plus maintenant amd fournit un pilote amdgpu-pro compatible avec ta carte sensé exploiter beaucoup mieux les capacités matérielles, même si le pilote est encore jeune et peu présenter encore quelques défauts avec certains matériels.
Autre chose pour ton information le disque dur Samsung de 1To est bien mal en point :
958 secteurs réalloués, 1189 erreurs sur les données qui n'ont pu être corrigées, 218 secteurs en sursis, sans parler des autres stats peu rassurantes.
A ta place je me méfierais de peur de perdre mes données.
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD103SI
LU WWN Device Id: 5 0024e9 204730924
Firmware Version: 1AG01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Fri Apr 28 16:07:58 2017 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 099 084 051 - 948
3 Spin_Up_Time POS--- 083 083 011 - 6120
4 Start_Stop_Count -O--CK 098 098 000 - 1730
5 Reallocated_Sector_Ct PO--CK 067 067 010 - 958
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 11860
9 Power_On_Hours -O--CK 096 096 000 - 19267
10 Spin_Retry_Count PO--CK 100 100 051 - 1
11 Calibration_Retry_Count -O--C- 100 100 000 - 81
12 Power_Cycle_Count -O--CK 098 098 000 - 1720
13 Read_Soft_Error_Rate -OSR-- 099 095 000 - 287
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 1189
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 055 000 - 24 (Min/Max 21/24)
194 Temperature_Celsius -O---K 067 054 000 - 33 (Min/Max 21/33)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 10890
196 Reallocated_Event_Count -O--CK 077 077 000 - 958
197 Current_Pending_Sector -O--C- 095 095 000 - 218
198 Offline_Uncorrectable ----CK 100 100 000 - 1
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 099 098 000 - 188
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedDernière modification par Laurent85 (Le 29/04/2017, à 11:27)
Hors ligne
#5 Le 29/04/2017, à 17:04
- Ceedjee
Re : Bug graphique après MAJ vers Ubuntu 17.04
J'envisage de faire une nouvelle installation une fois Debian 9 disponible officiellement, mais je voulais pouvoir continuer à travailler en attendant.
Concernant le disque dur, il a déjà fait l'objet d'un topic il y a quelques jours sur ce forum 
Edit : J'ai vu que le driver mesa installé par défaut est la version 17.0.3 et qu'une version plus récente était disponible. J'ai donc mis-à-jour vers la 17.0.4, mais le problème est toujours présent ...
Dernière modification par Ceedjee (Le 30/04/2017, à 03:40)
Hors ligne
#6 Le 02/05/2017, à 02:32
- Ceedjee
Re : Bug graphique après MAJ vers Ubuntu 17.04
Personne n'a de solution autre que réinstaller une ancienne version d'Ubuntu ?
Hors ligne
#7 Le 02/05/2017, à 08:59
- malbo
Re : Bug graphique après MAJ vers Ubuntu 17.04
Le rapport dont tu as donné le lien dans le post #3 est là :
Posting 929894 from bn-defc2 posted at 2017-04-28 15:08:01 expires: 2017-05-28 15:08:01
bisnext report id defc2
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-20-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 17.04
Machine: Device: desktop Mobo: ASRock model: G41C-GS
BIOS: American Megatrends v: P1.30 date: 10/01/2013
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core2 Quad Q9300 (-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 20029
clock speeds: max: 2503 MHz 1: 2503 MHz 2: 2503 MHz 3: 2503 MHz
4: 2503 MHz
Memory: Array-1 capacity: 4 GB devices: 2 EC: None max module size: 4 GB
Device-1: DIMM0 size: 2 GB (Double-bank) speed: N/A type: SDRAM
manufacturer: N/A part: N/A
Device-2: DIMM1 size: 2 GB (Double-bank) speed: N/A type: SDRAM
manufacturer: N/A part: N/A
Graphics: Card: Advanced Micro Devices [AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP]
bus-ID: 04:00.0 chip-ID: 1002:6819
Display Server: X.Org 1.19.3 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.00hz
GLX Renderer: Gallium 0.4 on AMD PITCAIRN (DRM 2.49.0 / 4.10.0-20-generic, LLVM 4.0.0)
GLX Version: 3.0 Mesa 17.0.3 Direct Rendering: Yes
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
Card-2 Advanced Micro Devices [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
driver: snd_hda_intel bus-ID: 04:00.1 chip-ID: 1002:aab0
Sound: Advanced Linux Sound Architecture v: k4.10.0-20-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d800
bus-ID: 01:00.0 chip-ID: 10ec:8168
IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 3500.7GB (64.0% used)
ID-1: /dev/sda model: ST500DM002 size: 500.1GB
ID-2: /dev/sdb model: WDC_WD20EARX size: 2000.4GB
ID-3: /dev/sdc model: SAMSUNG_HD103SI size: 1000.2GB
Optical: No optical drives detected.
Partition: ID-1: / size: 455G used: 264G (62%) fs: ext4 dev: /dev/sda1
label: N/A uuid: e7ac0cda-f680-4b9a-b017-ff71740e2d4d
ID-2: /media/Sauvegardes size: 1.9T used: 1.8T (98%) fs: fuseblk dev: /dev/sdb1
label: Sauvegardes uuid: C05247F95247F2A8
ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: ff94bd59-e672-4785-abe6-b84ac9f79795
ID-4: swap-2 size: 0.52GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-5: swap-3 size: 0.52GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
ID-6: swap-4 size: 0.52GB used: 0.00GB (0%) fs: swap dev: /dev/zram2
label: N/A uuid: N/A
ID-7: swap-5 size: 0.52GB used: 0.00GB (0%) fs: swap dev: /dev/zram3
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sdc1 size: 602.06G
fs: ext4 label: Multimedia uuid: 9b27f8c0-42ef-4f25-8810-cf5e67282f3a
Sensors: System Temperatures: cpu: 49.5C mobo: 44.0C gpu: 44.0
Fan Speeds (in rpm): cpu: 3183 fan-1: 0 fan-3: 0 fan-4: 0 fan-5: 0
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu zesty main universe restricted multiverse
deb http://archive.ubuntu.com/ubuntu zesty-updates restricted multiverse universe main
deb http://security.ubuntu.com/ubuntu/ zesty-security main universe restricted multiverse
Active apt sources in file: /etc/apt/sources.list.d/deluge-team-ubuntu-ppa-zesty.list
deb http://ppa.launchpad.net/deluge-team/ppa/ubuntu zesty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 10.6% command: vivaldi-bin pid: 3123 mem: 235.54MB (5.9%)
2: cpu: 9.8% command: vivaldi-bin pid: 3430 mem: 301.55MB (7.6%)
3: cpu: 6.3% command: vivaldi-bin pid: 3014 mem: 222.93MB (5.6%)
4: cpu: 4.5% command: vivaldi-bin pid: 3309 mem: 174.55MB (4.4%)
5: cpu: 4.2% command: vivaldi-bin pid: 3077 mem: 136.12MB (3.4%)
6: cpu: 2.3% command: vivaldi-bin pid: 3184 mem: 165.91MB (4.2%)
7: cpu: 1.3% command: compiz pid: 2217 mem: 124.04MB (3.1%)
8: cpu: 1.1% command: vivaldi-bin pid: 3657 mem: 89.92MB (2.2%)
9: cpu: 0.9% command: Xorg pid: 1497 mem: 78.86MB (1.9%)
10: cpu: 0.6% command: vivaldi-bin pid: 3579 mem: 86.05MB (2.1%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 301.55MB (7.6%) command: vivaldi-bin pid: 3430 cpu: 9.8%
2: mem: 235.54MB (5.9%) command: vivaldi-bin pid: 3123 cpu: 10.6%
3: mem: 222.93MB (5.6%) command: vivaldi-bin pid: 3014 cpu: 6.3%
4: mem: 174.55MB (4.4%) command: vivaldi-bin pid: 3309 cpu: 4.5%
5: mem: 165.91MB (4.2%) command: vivaldi-bin pid: 3184 cpu: 2.3%
6: mem: 136.12MB (3.4%) command: vivaldi-bin pid: 3077 cpu: 4.2%
7: mem: 124.04MB (3.1%) command: compiz pid: 2217 cpu: 1.3%
8: mem: 108.13MB (2.7%) command: nautilus pid: 2204 cpu: 0.6%
9: mem: 89.92MB (2.2%) command: vivaldi-bin pid: 3657 cpu: 1.1%
10: mem: 86.05MB (2.1%) command: vivaldi-bin pid: 3579 cpu: 0.6%
Info: Processes: 248 Uptime: 27 min Memory: 1701.7/3947.2MB
Init: systemd v: 232 runlevel: 5 default: 2 Gcc sys: 6.3.0 alt: 5
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
============================= Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location.
=> No known boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 968,384,511 968,382,464 83 Linux
/dev/sda2 968,386,558 976,771,071 8,384,514 5 Extended
/dev/sda5 968,386,560 976,771,071 8,384,512 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 1,8 TiB, 2000398934016 octets, 3907029168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 3,907,028,991 3,907,026,944 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disque /dev/sdc : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,175,908,352 1,175,906,305 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/sda1 e7ac0cda-f680-4b9a-b017-ff71740e2d4d ext4
/dev/sda5 ff94bd59-e672-4785-abe6-b84ac9f79795 swap
/dev/sdb1 C05247F95247F2A8 ntfs Sauvegardes
/dev/sdc1 9b27f8c0-42ef-4f25-8810-cf5e67282f3a ext4 Multimedia
/dev/zram0 e8ce7b96-f950-4278-b313-abc83015393d swap
/dev/zram1 77b24568-8b6f-4f51-8542-7fa6feb545c7 swap
/dev/zram2 3cd9d974-8001-4d52-a12c-79c1dfcab617 swap
/dev/zram3 5147e7f8-28b2-43f7-83e4-3ef688f9d0f7 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 avril 28 15:40 ata-SAMSUNG_HD103SI_S1VSJ9BB202991 -> ../../sdc
lrwxrwxrwx 1 root root 10 avril 28 15:40 ata-SAMSUNG_HD103SI_S1VSJ9BB202991-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 avril 28 15:40 ata-ST500DM002-1ER14C_Z4Y0CSSH -> ../../sda
lrwxrwxrwx 1 root root 10 avril 28 15:40 ata-ST500DM002-1ER14C_Z4Y0CSSH-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 28 15:40 ata-ST500DM002-1ER14C_Z4Y0CSSH-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 28 15:40 ata-ST500DM002-1ER14C_Z4Y0CSSH-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 avril 28 15:40 ata-WDC_WD20EARX-00PASB0_WD-WCAZAA402783 -> ../../sdb
lrwxrwxrwx 1 root root 10 avril 28 15:40 ata-WDC_WD20EARX-00PASB0_WD-WCAZAA402783-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 avril 28 15:40 wwn-0x5000c500671fbf10 -> ../../sda
lrwxrwxrwx 1 root root 10 avril 28 15:40 wwn-0x5000c500671fbf10-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 28 15:40 wwn-0x5000c500671fbf10-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 28 15:40 wwn-0x5000c500671fbf10-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 avril 28 15:40 wwn-0x50014ee2b0fd2f89 -> ../../sdb
lrwxrwxrwx 1 root root 10 avril 28 15:40 wwn-0x50014ee2b0fd2f89-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 avril 28 15:40 wwn-0x50024e9204730924 -> ../../sdc
lrwxrwxrwx 1 root root 10 avril 28 15:40 wwn-0x50024e9204730924-part1 -> ../../sdc1
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1 /media/Sauvegardes fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/loop0 /snap/core/1577 squashfs 79M 79M 0 100% 100%
/dev/loop1 /snap/anbox-installer/10 squashfs 128K 128K 0 100% 100%
/dev/sda1 / ext4 455G 264G 169G 62% 3%
/dev/sdb1 /media/Sauvegardes fuseblk 1.9T 1.8T 46G 98% 1%
============================= Boot Files Content ==============================
___________________________ sda1/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e7ac0cda-f680-4b9a-b017-ff71740e2d4d' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e7ac0cda-f680-4b9a-b017-ff71740e2d4d
else
search --no-floppy --fs-uuid --set=root e7ac0cda-f680-4b9a-b017-ff71740e2d4d
fi
linux /boot/vmlinuz-4.10.0-20-generic root=UUID=e7ac0cda-f680-4b9a-b017-ff71740e2d4d ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-20-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=e7ac0cda-f680-4b9a-b017-ff71740e2d4d / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=ff94bd59-e672-4785-abe6-b84ac9f79795 none swap sw 0 0
# Partitions Windows - NTFS
UUID=C05247F95247F2A8 /media/Sauvegardes ntfs-3g
rw,user,auto,gid=100,uid=1000,nls=utf8,umask=002 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
System Info for The Running System
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.10.0-20-generic root=UUID=e7ac0cda-f680-4b9a-b017-ff71740e2d4d ro quiet splash vt.handoff=7
_______________________________ Wireless Status _______________________________
_________________________________ USB devices __________________________________
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c326 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 24.742s (kernel) + 32.630s (userspace) = 57.372s
blame, first 10:
keyboard-setup.service 16.385s
dev-sda1.device 16.167s
systemd-modules-load.service 14.669s
systemd-udevd.service 13.463s
NetworkManager-wait-online.service 8.716s
click-system-hooks.service 3.693s
postfix@-.service 3.573s
fwupd.service 3.496s
NetworkManager.service 3.343s
accounts-daemon.service 2.372s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @32.621s
2 multi-user.target @32.621s
3 nmbd.service @32.266s +353ms
4 network-online.target @32.263s
5 NetworkManager-wait-online.service @23.546s +8.716s
6 NetworkManager.service @20.201s +3.343s
7 dbus.service @19.920s
8 basic.target @19.897s
9 sockets.target @19.897s
10 snapd.socket @19.888s +9ms
11 sysinit.target @19.886s
12 apparmor.service @19.496s +389ms
13 local-fs.target @19.495s
14 run-user-1000-gvfs.mount @29.367s
15 run-user-1000.mount @27.186s
16 local-fs-pre.target @18.401s
17 keyboard-setup.service @2.016s +16.385s
18 systemd-journald.socket @1.966s
19 -.slice @1.947s
___________________________________ Modules Loaded ____________________________
Module Size Used by
amdgpu 1564672 0
amd_iommu_v2 20480 1 amdkfd
amdkfd 139264 1
autofs4 40960 2
binfmt_misc 20480 1
bluetooth 557056 9 bnep
bnep 20480 2
btrfs 1093632 0
coretemp 16384 0
drm 352256 10 amdgpu,radeon,ttm,drm_kms_helper
drm_kms_helper 151552 2 amdgpu,radeon
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
gpio_ich 16384 0
hfs 57344 0
hfsplus 106496 0
hid 114688 5 hid_generic,usbhid,hid_logitech_dj,hid_logitech_hidpp
hid_generic 16384 0
hid_logitech_dj 20480 0
hid_logitech_hidpp 28672 0
hwmon_vid 16384 1 w83627ehf
i2c_algo_bit 16384 2 amdgpu,radeon
input_leds 16384 0
ip_tables 24576 0
irqbypass 16384 1 kvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
mac_hid 16384 0
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 1
pata_acpi 16384 0
pci_stub 16384 1
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
radeon 1507328 71
raid6_pq 114688 1 btrfs
serio_raw 16384 0
shpchp 36864 0
snd 77824 19 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_pcm,snd_hda_codec_via
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_via
snd_hda_codec_generic 73728 1 snd_hda_codec_via
snd_hda_codec_hdmi 49152 1
snd_hda_codec_via 24576 1
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_via
snd_hda_intel 36864 4
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 98304 2 amdgpu,radeon
ufs 73728 0
usbhid 53248 0
vboxdrv 462848 3 vboxnetadp,vboxnetflt,vboxpci
vboxnetadp 28672 0
vboxnetflt 28672 0
vboxpci 24576 0
w83627ehf 45056 0
xfs 1187840 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
zram 24576 4
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR:en
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC=fr_FR.UTF-8
LC_TIME=fr_FR.UTF-8
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY=fr_FR.UTF-8
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER=fr_FR.UTF-8
LC_NAME=fr_FR.UTF-8
LC_ADDRESS=fr_FR.UTF-8
LC_TELEPHONE=fr_FR.UTF-8
LC_MEASUREMENT=fr_FR.UTF-8
LC_IDENTIFICATION=fr_FR.UTF-8
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
LANGUAGE="fr_FR:en"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,fr,us
variant: ,oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
ghostscript 9.19~dfsg+1-0ubuntu7.2 from:9.19~dfsg+1-0ubuntu7.1
ghostscript-x 9.19~dfsg+1-0ubuntu7.2 from:9.19~dfsg+1-0ubuntu7.1
libgs9 9.19~dfsg+1-0ubuntu7.2 from:9.19~dfsg+1-0ubuntu7.1
libgs9-common 9.19~dfsg+1-0ubuntu7.2 from:9.19~dfsg+1-0ubuntu7.1
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
linux-image-extra-4.8.0-46-generic
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
libice6:i386 2:1.0.9-1
libsm6:i386 2:1.2.2-1
libtxc-dxtn-s2tc0:i386 0~git20131104-1.1
libvdpau1:i386 1.1.1-3ubuntu1
libxt6:i386 1:1.1.5-0ubuntu1
Use the following command to clean old configuration files:
sudo apt purge libice6:i386 libsm6:i386 libtxc-dxtn-s2tc0:i386 libvdpau1:i386 libxt6:i386
________________________ Kernel Candidates for Removal ________________________
At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !
kernel versions kept:
4.10.0-20-generic (running kernel)
4.10.0-19-generic
kernel candidates for removal:
4.8.0-46-generic
Command to run in a terminal to purge the packages from the system:
sudo apt purge linux-headers-4.8.0-46-generic linux-image-4.8.0-46-generic linux-image-extra-4.8.0-46-generic
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.20.22
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-4.10.0-20 4.10.0-20.22
linux-headers-4.10.0-20-generic 4.10.0-20.22
linux-headers-generic 4.10.0.20.22
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-4.10.0-20-generic 4.10.0-20.22
linux-image-4.8.0-46-generic 4.8.0-46.49
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-20-generic 4.10.0-20.22
linux-image-extra-4.8.0-46-generic 4.8.0-46.49
linux-image-generic 4.10.0.20.22
File list in /boot directory:
abi-4.10.0-19-generic
abi-4.10.0-20-generic
abi-4.8.0-46-generic
config-4.10.0-19-generic
config-4.10.0-20-generic
config-4.8.0-46-generic
grub
grub.bak
initrd.img-4.10.0-19-generic
initrd.img-4.10.0-20-generic
initrd.img-4.8.0-46-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
System.map-4.10.0-20-generic
System.map-4.8.0-46-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-20-generic
vmlinuz-4.8.0-46-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.144348] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.916641] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.916643] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.917899] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.917900] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 41.318890] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 41.774409] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004AF (\GPR2) (20160930/utaddress-247)
[ 44.587468] audit: type=1400 audit(1493390455.116:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=872 comm="apparmor_parser"
[ 44.587613] audit: type=1400 audit(1493390455.116:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=873 comm="apparmor_parser"
[ 44.589767] audit: type=1400 audit(1493390455.120:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=875 comm="apparmor_parser"
[ 44.589770] audit: type=1400 audit(1493390455.120:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=875 comm="apparmor_parser"
[ 44.589772] audit: type=1400 audit(1493390455.120:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=875 comm="apparmor_parser"
[ 44.589775] audit: type=1400 audit(1493390455.120:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=875 comm="apparmor_parser"
[ 44.590790] audit: type=1400 audit(1493390455.120:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=876 comm="apparmor_parser"
[ 44.592024] audit: type=1400 audit(1493390455.120:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=880 comm="apparmor_parser"
[ 44.592387] audit: type=1400 audit(1493390455.124:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=874 comm="apparmor_parser"
[ 44.592389] audit: type=1400 audit(1493390455.124:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=874 comm="apparmor_parser"
[ 44.790362] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Keyboard id=9 [slave pointer (2)]
⎜ ↳ Logitech M525 id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Logitech USB Keyboard id=8 [slave keyboard (3)]
↳ Logitech USB Keyboard id=11 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1280x1024 60.02
1440x900 59.90
1280x800 59.91
1152x864 75.00
1024x768 70.07 60.00
800x600 60.32 56.25
640x480 66.67 59.94
720x400 70.08
DVI-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 49.278] (==) No Layout section. Using the first Screen section.
[ 49.278] (==) No screen section available. Using defaults.
[ 49.278] (**) |-->Screen "Default Screen Section" (0)
[ 49.278] (**) | |-->Monitor "<default monitor>"
[ 49.278] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 49.281] (--) PCI:*(0:4:0:0) 1002:6819:174b:e221 rev 0, Mem @ 0xe0000000/268435456, 0xfeb80000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 49.281] (II) LoadModule: "glx"
[ 49.366] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 49.948] (II) LoadModule: "radeon"
[ 49.948] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 49.976] (II) LoadModule: "ati"
[ 49.977] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 50.034] (II) LoadModule: "modesetting"
[ 50.034] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 50.034] (II) LoadModule: "fbdev"
[ 50.034] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 50.034] (II) LoadModule: "vesa"
[ 50.035] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 50.046] (WW) Falling back to old probe method for modesetting
[ 50.046] (WW) Falling back to old probe method for fbdev
[ 50.046] (II) Loading sub module "fbdevhw"
[ 50.046] (II) LoadModule: "fbdevhw"
[ 50.046] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 50.046] (WW) Falling back to old probe method for vesa
[ 50.046] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50.047] (II) Loading sub module "fb"
[ 50.047] (II) LoadModule: "fb"
[ 50.047] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50.047] (II) Loading sub module "dri2"
[ 50.047] (II) LoadModule: "dri2"
[ 50.047] (II) Loading sub module "glamoregl"
[ 50.047] (II) LoadModule: "glamoregl"
[ 50.047] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 50.994] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 50.996] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 51.028] (II) RADEON(0): Output DVI-0 has no monitor section
[ 51.044] (II) RADEON(0): Output DVI-1 has no monitor section
[ 51.108] (II) RADEON(0): Monitor name: Viseo 230Ws
[ 51.124] (II) Loading sub module "ramdac"
[ 51.124] (II) LoadModule: "ramdac"
[ 51.124] (II) UnloadModule: "modesetting"
[ 51.124] (II) UnloadModule: "fbdev"
[ 51.124] (II) UnloadModule: "vesa"
[ 51.393] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 51.404] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 51.569] (II) LoadModule: "libinput"
[ 51.569] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 71.109] (II) UnloadModule: "libinput"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-20-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-20-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? yes
Is radeon blacklisted? no
Is amdgpu loaded? yes
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 1002:6819
BusID "PCI:4@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "radeon"
Found "/dev/dri/card0", driven by "radeon"
output 0:
card0-DVI-D-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "radeon"
Skipping "/dev/dri/card0", driven by "radeon"
Does it require offloading? no
last cards number = 1
Has amd? yes
Has intel? no
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
============================ Disks SMART attributes ===========================
### ATA disks: sda sdb sdc
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST500DM002-1ER14C
LU WWN Device Id: 5 000c50 0671fbf10
Firmware Version: CC43
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Apr 28 16:07:57 2017 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 159621984
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 273
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 081 060 030 - 149156395
9 Power_On_Hours -O--CK 085 085 000 - 13646
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 271
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 099 000 - 0 0 30
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 060 048 045 - 40 (Min/Max 27/40)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 120
193 Load_Cycle_Count -O--CK 100 100 000 - 300
194 Temperature_Celsius -O---K 040 052 000 - 40 (0 23 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 13642h+30m+52.224s
241 Total_LBAs_Written ------ 100 253 000 - 16374075482
242 Total_LBAs_Read ------ 100 253 000 - 21959389113
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD20EARX-00PASB0
LU WWN Device Id: 5 0014ee 2b0fd2f89
Firmware Version: 51.0AB51
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Apr 28 16:07:57 2017 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 169 165 021 - 6541
4 Start_Stop_Count -O--CK 096 096 000 - 4878
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 043 043 000 - 41828
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1178
192 Power-Off_Retract_Count -O--CK 200 200 000 - 503
193 Load_Cycle_Count -O--CK 001 001 000 - 1367384
194 Temperature_Celsius -O---K 112 090 000 - 38
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 14
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 5
200 Multi_Zone_Error_Rate ---R-- 200 184 000 - 20
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdc:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD103SI
LU WWN Device Id: 5 0024e9 204730924
Firmware Version: 1AG01118
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Fri Apr 28 16:07:58 2017 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 099 084 051 - 948
3 Spin_Up_Time POS--- 083 083 011 - 6120
4 Start_Stop_Count -O--CK 098 098 000 - 1730
5 Reallocated_Sector_Ct PO--CK 067 067 010 - 958
7 Seek_Error_Rate POSR-- 100 100 051 - 0
8 Seek_Time_Performance P-S--K 100 100 015 - 11860
9 Power_On_Hours -O--CK 096 096 000 - 19267
10 Spin_Retry_Count PO--CK 100 100 051 - 1
11 Calibration_Retry_Count -O--C- 100 100 000 - 81
12 Power_Cycle_Count -O--CK 098 098 000 - 1720
13 Read_Soft_Error_Rate -OSR-- 099 095 000 - 287
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 1189
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 076 055 000 - 24 (Min/Max 21/24)
194 Temperature_Celsius -O---K 067 054 000 - 33 (Min/Max 21/33)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 10890
196 Reallocated_Event_Count -O--CK 077 077 000 - 958
197 Current_Pending_Sector -O--C- 095 095 000 - 218
198 Offline_Uncorrectable ----CK 100 100 000 - 1
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 099 098 000 - 188
201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedJe n'ai rien de mieux à ajouter au post #4 de Laurent85.
D'après cette discussion, je pense que la version plus ancienne que tu envisages de réinstaller est Ubuntu 16.04.2 64 bits (qui vient avec le noyau de la famille 4.8.0-x). C'est bien ça ?EDIT : je me plante. Ce n'est pas la même machine.
Quelle version envisages-tu de réinstaller ?
Dernière modification par malbo (Le 02/05/2017, à 09:03)
Hors ligne
#8 Le 02/05/2017, à 18:57
- Ceedjee
Re : Bug graphique après MAJ vers Ubuntu 17.04
Si c'est la seul solution à l'heure actuelle, je vais ré-installer Ubuntu 16.04.2 en attendant la sortie de Debian 9.
Hors ligne
#9 Le 02/05/2017, à 20:54
- malbo
Re : Bug graphique après MAJ vers Ubuntu 17.04
ça doit être la meilleure solution.
Hors ligne