#26 Le 27/04/2017, à 20:42
- Laurent85
Re : crash après une maj - reparation boot lvm - démontage modifie le boot!
Ça ne plantait pas avant ?
Ajoute le paramètre intel_idle.max_cstate=1 aux paramètres de démarrage, copie colle cette commande dans le terminal, ne cherche pas à la saisir :
sudo sed -i 's/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"intel_idle.max_cstate=1\"/' /etc/default/grub
puis mets à jour grub :
sudo update-grub
Et génère un rapport bisnext après redémarrage, vois la doc https://doc.ubuntu-fr.org/bisnext#insta … n_standard
Hors ligne
#27 Le 27/04/2017, à 23:15
- bug-in
Re : crash après une maj - reparation boot lvm - démontage modifie le boot!
Merci de ton indication.
Les plantages sont assez récents en fait. J'ai un peu de mal a les datés, mais l'ensemble est arrivé en moins de deux semaines en gros.
Voici le nouveau rapport :
bisnext report id 3effb also available at http://paste.debian.net/929764/
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-20-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 17.04
Machine: Device: laptop System: Micro-Star product: CR70 2M/CX70 2OC/CX70 2OD v: REV:1.0
Mobo: Micro-Star model: MS-1758 v: REV:1.0
UEFI: American Megatrends v: E1758IMS.10G date: 02/21/2014
Chassis: CR70 2M/CX70 2OC/CX70 2OD type: 10
Battery BAT1: charge: 27.9 Wh 96.8% condition: 28.8/44.0 Wh (65%)
volts: 12.4/11.1
model: MSI MS-1758 status: N/A
CPU: Dual core Intel Celeron 2950M (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7981
clock speeds: min/max: 800/2000 MHz 1: 1501 MHz 2: 1215 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB speed: 1600 MHz type: DDR3
manufacturer: Kingston part: 99U5428-018.A00LF
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: 2 GB speed: 1600 MHz type: DDR3
manufacturer: Hynix/Hyundai part: HMT425S6AFR6A-PB
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card: Intel 4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0406
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1600x900@60.08hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 17.0.3 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0c0c
Sound: Advanced Linux Sound Architecture v: k4.10.0-20-generic
Network: Card-1: Qualcomm Atheros AR8161 Gigabit Ethernet
driver: alx port: e000 bus-ID: 03:00.0 chip-ID: 1969:1091
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Realtek RTL8723AE PCIe Wireless Network Adapter
driver: rtl8723ae port: d000 bus-ID: 04:00.0 chip-ID: 10ec:8723
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 500.1GB (59.8% used)
ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GTA0N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 456G used: 274G (64%) fs: ext4 dev: /dev/dm-0
label: N/A uuid: e7b9bbcf-6959-42ce-8a91-d5c797819418
ID-2: /boot size: 237M used: 139M (62%) fs: ext2 dev: /dev/sda2
label: N/A uuid: 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
ID-3: /boot/efi size: 511M used: 13M (3%) fs: vfat dev: /dev/sda1
label: N/A uuid: B66F-2CED
ID-4: swap-1 size: 2.60GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-5: swap-2 size: 2.60GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda3 size: 499.31G label: N/A uuid: N/A
ID-2: /dev/dm-1 size: 2.06G
fs: swap label: N/A uuid: 42b412bb-a8cd-4cde-a06d-f5f02abe8ec8
Sensors: System Temperatures: cpu: 61.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-security main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-security main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-security universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-security universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-security multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-security multiverse
deb http://archive.canonical.com/ubuntu zesty partner
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 48.8% command: firefox pid: 2712 mem: 748.30MB (7.5%)
2: cpu: 8.8% command: my-weather-indicator (started by: python3) pid: 2391 mem: 58.71MB (0.5%)
3: cpu: 7.9% command: compiz pid: 2330 mem: 118.54MB (1.1%)
4: cpu: 2.4% command: Xorg pid: 1217 mem: 73.21MB (0.7%)
5: cpu: 1.4% command: nautilus pid: 2302 mem: 62.39MB (0.6%)
6: cpu: 1.1% command: fwupd pid: 2504 mem: 53.10MB (0.5%)
7: cpu: 1.1% command: gnome-software pid: 2314 mem: 78.14MB (0.7%)
8: cpu: 1.1% command: NetworkManager pid: 898 mem: 19.14MB (0.1%)
9: cpu: 0.8% daemon: ~kworker/u4:5~ pid: 175 mem: 0.00MB (0.0%)
10: cpu: 0.8% command: init pid: 1 mem: 7.91MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 748.30MB (7.5%) command: firefox pid: 2712 cpu: 48.8%
2: mem: 118.54MB (1.1%) command: compiz pid: 2330 cpu: 7.9%
3: mem: 118.33MB (1.1%) command: signon-ui pid: 2436 cpu: 0.5%
4: mem: 78.14MB (0.7%) command: gnome-software pid: 2314 cpu: 1.1%
5: mem: 73.21MB (0.7%) command: Xorg pid: 1217 cpu: 2.4%
6: mem: 62.39MB (0.6%) command: nautilus pid: 2302 cpu: 1.4%
7: mem: 58.71MB (0.5%) command: my-weather-indicator (started by: python3) pid: 2391 cpu: 8.8%
8: mem: 53.10MB (0.5%) command: fwupd pid: 2504 cpu: 1.1%
9: mem: 41.04MB (0.4%) command: oxide-renderer pid: 2585 cpu: 0.0%
10: mem: 37.85MB (0.3%) command: gnome-terminal-server pid: 2882 cpu: 0.7%
Info: Processes: 231 Uptime: 3 min Memory: 1498.3/9918.7MB
Init: systemd v: 232 runlevel: 5 default: 2
Gcc sys: 6.3.0 alt: 4.8/4.9/5
Client: Shell (bash 4.4.51 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0004,0005,0002,0003
Boot0000* ubuntu HD(1,GPT,5a14528d-1c1d-431a-8400-eae70b2bf694,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0002* UEFI: IP4 Qualcomm Atheros PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(448a5b44f86a,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot0003* UEFI: IP6 Qualcomm Atheros PCIe Network Controller PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(448a5b44f86a,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0004* Windows Boot Manager HD(1,GPT,5a14528d-1c1d-431a-8400-eae70b2bf694,0x800,0x100000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)
Boot0005* ubuntu HD(1,GPT,5a14528d-1c1d-431a-8400-eae70b2bf694,0x800,0x100000)/File(\EFI\Ubuntu\grubx64.efi)
vfat partitions details:
/dev/sda1: UUID="B66F-2CED" TYPE="vfat" PARTUUID="5a14528d-1c1d-431a-8400-eae70b2bf694"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Boot/bootx64.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Microsoft/Boot/bootmgfw.efi
ded965934506efb38a6dcb9ac5b2b79e /EFI/Microsoft/Boot/bootx64.efi
ded965934506efb38a6dcb9ac5b2b79e /ubuntu/shimx64.efi
ded965934506efb38a6dcb9ac5b2b79e /Boot/bootx64.efi
ded965934506efb38a6dcb9ac5b2b79e /Microsoft/Boot/bootmgfw.efi
ded965934506efb38a6dcb9ac5b2b79e /Microsoft/Boot/bootx64.efi
============================= Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg
sda3: __________________________________________________________________________
File system: LVM2_member
Boot sector type: -
Boot sector info:
ubuntu-vg-root: ________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /etc/fstab
ubuntu-vg-swap_1: ______________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,550,335 499,712 Data partition (Linux)
/dev/sda3 1,550,336 976,771,071 975,220,736 Logical Volume Manager (LVM) partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mapper/ubuntu--vg-root e7b9bbcf-6959-42ce-8a91-d5c797819418 ext4
/dev/mapper/ubuntu--vg-swap_1 42b412bb-a8cd-4cde-a06d-f5f02abe8ec8 swap
/dev/sda1 B66F-2CED vfat
/dev/sda2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb ext2
/dev/sda3 TewiQI-eTT8-SmXL-tI0j-5Dlw-yjv1-00zdn9 LVM2_member
/dev/zram0 39f1e798-e10f-4bbe-a4c1-c6a03dedb336 swap
/dev/zram1 ade77d3f-0f34-41e5-9d8b-3d8429ab086d swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 avril 27 23:16 ata-HL-DT-ST_DVDRAM_GTA0N_KW4E4ND4759 -> ../../sr0
lrwxrwxrwx 1 root root 9 avril 27 23:16 ata-TOSHIBA_MQ01ABF050_446CP1V7T -> ../../sda
lrwxrwxrwx 1 root root 10 avril 27 23:16 ata-TOSHIBA_MQ01ABF050_446CP1V7T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 27 23:16 ata-TOSHIBA_MQ01ABF050_446CP1V7T-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 27 23:16 ata-TOSHIBA_MQ01ABF050_446CP1V7T-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 avril 27 23:16 dm-name-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 avril 27 23:16 dm-name-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 avril 27 23:16 dm-uuid-LVM-7odVySKXCvic2CzBrJRIt7m9IyxFpcbdpddqYVdAecO1kskH2a3ucFlxftWBpfMT -> ../../dm-1
lrwxrwxrwx 1 root root 10 avril 27 23:16 dm-uuid-LVM-7odVySKXCvic2CzBrJRIt7m9IyxFpcbdvmO2RsrpeeSaBQ0lPb6faORKdlj2N4CR -> ../../dm-0
lrwxrwxrwx 1 root root 10 avril 27 23:16 lvm-pv-uuid-TewiQI-eTT8-SmXL-tI0j-5Dlw-yjv1-00zdn9 -> ../../sda3
lrwxrwxrwx 1 root root 10 avril 27 23:16 raid-ubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 avril 27 23:16 raid-ubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 9 avril 27 23:16 wwn-0x50000395727005ec -> ../../sda
lrwxrwxrwx 1 root root 10 avril 27 23:16 wwn-0x50000395727005ec-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 27 23:16 wwn-0x50000395727005ec-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 avril 27 23:16 wwn-0x50000395727005ec-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 avril 27 23:16 wwn-0x5001480000000000 -> ../../sr0
_________________________ "ls -R /dev/mapper/" output _________________________
/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/mapper/ubuntu--vg-root / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda2 /boot ext2 (rw,relatime,block_validity,barrier,user_xattr,acl,stripe=4)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/mapper/ubuntu--vg-root / ext4 456G 274G 159G 64% 3%
/dev/sda1 /boot/efi vfat 511M 13M 499M 3% -
/dev/sda2 /boot ext2 237M 139M 86M 62% 1%
============================= Boot Files Content ==============================
_____________________________ sda2/grub/grub.cfg: ______________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod lvm
insmod ext2
set root='lvmid/7odVyS-KXCv-ic2C-zBrJ-RIt7-m9Iy-xFpcbd/vmO2Rs-rpee-SaBQ-0lPb-6faO-RKdl-j2N4CR'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/7odVyS-KXCv-ic2C-zBrJ-RIt7-m9Iy-xFpcbd/vmO2Rs-rpee-SaBQ-0lPb-6faO-RKdl-j2N4CR' e7b9bbcf-6959-42ce-8a91-d5c797819418
else
search --no-floppy --fs-uuid --set=root e7b9bbcf-6959-42ce-8a91-d5c797819418
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
linux /vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash $vt_handoff
initrd /initrd.img-4.10.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
menuentry 'Ubuntu, avec Linux 4.10.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-20-generic-advanced-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.10.0-20-generic…'
linux /vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-20-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-20-generic-init-upstart-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.10.0-20-generic…'
linux /vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-20-generic-recovery-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.10.0-20-generic…'
linux /vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset intel_idle.max_cstate=1
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.10.0-20-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-46-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-46-generic-advanced-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.8.0-46-generic…'
linux /vmlinuz-4.8.0-46-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-46-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-46-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-46-generic-init-upstart-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.8.0-46-generic…'
linux /vmlinuz-4.8.0-46-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-46-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-46-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-46-generic-recovery-e7b9bbcf-6959-42ce-8a91-d5c797819418' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
else
search --no-floppy --fs-uuid --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
fi
echo 'Chargement de Linux 4.8.0-46-generic…'
linux /vmlinuz-4.8.0-46-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset intel_idle.max_cstate=1
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-46-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root B66F-2CED
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root B66F-2CED
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
menuentry "efi/EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
chainloader (${root})/efi/EFI/ubuntu/fwupx64.efi
}
menuentry "efi/EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb
chainloader (${root})/efi/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
__________________________ ubuntu-vg-root/etc/fstab: ___________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda2 during installation
#UUID=6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb /boot ext2 defaults 0 2
# /boot/efi was on /dev/sda1 during installation
#UUID=B66F-2CED /boot/efi vfat defaults 0 1
#/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
/file.swap swap swap defaults 0 0
UUID=6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb /boot ext2 defaults 0 2
UUID=B66F-2CED /boot/efi vfat defaults 0 1
===============================================================================
System Info for The Running System
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro intel_idle.max_cstate=1 quiet splash vt.handoff=7
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 064e:9807 Suyin Corp.
Bus 003 Device 003: ID 13d3:3394 IMC Networks Bluetooth
Bus 003 Device 002: ID 0461:4d22 Primax Electronics, Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 7: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 8: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 2.552s (firmware) + 15.858s (loader) + 13.652s (kernel) + 41.501s (userspace) = 1min 13.564s
blame, first 10:
dev-mapper-ubuntu\x2d\x2dvg\x2droot.device 23.906s
keyboard-setup.service 22.349s
lvm2-monitor.service 21.081s
systemd-udevd.service 19.820s
click-system-hooks.service 8.674s
accounts-daemon.service 6.469s
NetworkManager.service 5.087s
ModemManager.service 4.555s
apport.service 4.009s
apache2.service 3.690s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @41.277s
2 multi-user.target @41.276s
3 apache-htcacheclean.service @41.272s +3ms
4 apache2.service @37.580s +3.690s
5 network.target @37.365s
6 wpa_supplicant.service @40.111s +1.389s
7 basic.target @31.903s
8 sockets.target @31.903s
9 snapd.socket @31.816s +86ms
10 sysinit.target @31.782s
11 apparmor.service @29.820s +1.961s
12 local-fs.target @29.813s
13 boot-efi.mount @29.770s +42ms
14 systemd-fsck@dev-disk-by\x2duuid-B66F\x2d2CED.service @28.433s +1.311s
15 dev-disk-by\x2duuid-B66F\x2d2CED.device @28.433s
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
ac97_bus 16384 1 snd_soc_core
ahci 36864 3
alx 45056 0
arc4 16384 2
autofs4 40960 2
binfmt_misc 20480 1
bluetooth 557056 31 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep 20480 2
btbcm 16384 1 btusb
btcoexist 53248 1 rtl8723ae
btintel 16384 1 btusb
btrfs 1093632 0
btrtl 16384 1 btusb
btusb 45056 0
cfg80211 602112 2 mac80211,rtlwifi
cmac 16384 1
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 1 ghash_clmulni_intel
dm_log 20480 2 dm_mirror,dm_region_hash
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
drm 352256 7 i915,drm_kms_helper
drm_kms_helper 151552 1 i915
dw_dmac 16384 0
dw_dmac_core 24576 1 dw_dmac
edac_core 53248 1 ie31200_edac
elan_i2c 36864 0
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
hfs 57344 0
hfsplus 106496 0
hid 114688 3 i2c_hid,hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1449984 91
ie31200_edac 16384 0
input_leds 16384 0
intel_cstate 20480 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
ip_tables 24576 0
irqbypass 16384 1 kvm
jfs 184320 0
joydev 20480 0
kvm 593920 1 kvm_intel
kvm_intel 200704 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
mac80211 782336 2 rtl_pci,rtlwifi
mac_hid 16384 0
mdio 16384 1 alx
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
minix 36864 0
msdos 20480 0
msi_wmi 16384 0
nls_iso8859_1 16384 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
raid6_pq 114688 1 btrfs
rfcomm 77824 2
rtl8723ae 86016 0
rtl8723_common 24576 1 rtl8723ae
rtl_pci 28672 1 rtl8723ae
rtlwifi 73728 2 rtl_pci,rtl8723ae
sdhci 45056 1 sdhci_acpi
sdhci_acpi 16384 0
serio_raw 16384 0
shpchp 36864 0
snd 77824 21 snd_compress,snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_soc_core,snd_pcm
snd_compress 20480 1 snd_soc_core
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 4
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 7 snd_hda_intel,snd_hda_codec,snd_pcm_dmaengine,snd_hda_core,snd_soc_rt5640,snd_hda_codec_hdmi,snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_core 233472 1 snd_soc_rt5640
snd_soc_rl6231 16384 1 snd_soc_rt5640
snd_soc_rt5640 118784 0
snd_soc_sst_acpi 16384 0
snd_soc_sst_match 16384 1 snd_soc_sst_acpi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 msi_wmi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ufs 73728 0
usbhid 53248 0
uvcvideo 90112 0
video 40960 2 msi_wmi,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 172032 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 1 msi_wmi
x86_pkg_temp_thermal 16384 0
xfs 1187840 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
zram 24576 2
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR:fr:en_GB:en
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC=fr_FR.UTF-8
LC_TIME=fr_FR.UTF-8
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY=fr_FR.UTF-8
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER=fr_FR.UTF-8
LC_NAME=fr_FR.UTF-8
LC_ADDRESS=fr_FR.UTF-8
LC_TELEPHONE=fr_FR.UTF-8
LC_MEASUREMENT=fr_FR.UTF-8
LC_IDENTIFICATION=fr_FR.UTF-8
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
LANGUAGE="fr_FR:fr:en_GB:en"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,fr,us
variant: latin9,oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________________ Broken Packages ______________________________
aptitude program not available on this system.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
intel-linux-graphics-installer 1.0.7-0intel1
linux-generic 4.10.0.20.22
linux-headers-4.10.0-20 4.10.0-20.22
linux-headers-4.10.0-20-generic 4.10.0-20.22
linux-headers-generic 4.10.0.20.22
linux-image-4.10.0-20-generic 4.10.0-20.22
linux-image-4.8.0-46-generic 4.8.0-46.49
linux-image-extra-4.10.0-20-generic 4.10.0-20.22
linux-image-extra-4.8.0-39-generic 4.8.0-39.42
linux-image-extra-4.8.0-46-generic 4.8.0-46.49
linux-image-generic 4.10.0.20.22
linux-signed-generic 4.10.0.20.22
linux-signed-image-4.10.0-20-generic 4.10.0-20.22
linux-signed-image-4.8.0-46-generic 4.8.0-46.49
linux-signed-image-generic 4.10.0.20.22
File list in /boot directory:
abi-4.10.0-20-generic
abi-4.8.0-46-generic
config-4.10.0-20-generic
config-4.8.0-46-generic
efi
grub
grub.bak
initrd.img-4.10.0-20-generic
initrd.img-4.8.0-46-generic
lost+found
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-20-generic
System.map-4.8.0-46-generic
vmlinuz-4.10.0-20-generic
vmlinuz-4.10.0-20-generic.efi.signed
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-46-generic.efi.signed
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xdbf73998 ACPI 2.0=0xdb9f2000 ACPI=0xdb9f2000 SMBIOS=0xdbf73318
[ 0.129993] ACPI Error: No handler for Region [EC__] (ffff8852550b3318) [EmbeddedControl] (20160930/evregion-166)
[ 0.129999] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
[ 0.130003] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8852550b4cf8), AE_NOT_EXIST (20160930/psparse-543)
[ 0.131045] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.219024] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.219087] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.352277] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.352738] Registered efivars operations
[ 1.129581] efifb: probing for efifb
[ 1.129594] efifb: framebuffer at 0xe0000000, using 1920k, total 1920k
[ 1.129595] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.129596] efifb: scrolling: redraw
[ 1.129597] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.129681] fb0: EFI VGA frame buffer device
[ 1.201084] EFI Variables Facility v0.08 2004-May-17
[ 1.341907] fb: switching to inteldrmfb from EFI VGA
[ 1.734142] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.731844] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.732598] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 4.732605] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8852550ea028), AE_NOT_FOUND (20160930/psparse-543)
[ 4.770852] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 4.770855] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8852550ea028), AE_NOT_FOUND (20160930/psparse-543)
[ 39.561805] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 40.231156] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20160930/utaddress-247)
[ 40.231164] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[ 40.231168] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20160930/utaddress-247)
[ 40.231171] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
[ 40.231174] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[ 40.231176] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20160930/utaddress-247)
[ 40.231179] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
[ 40.231182] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[ 40.231184] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20160930/utaddress-247)
[ 45.350191] audit: type=1400 audit(1493327770.621:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=830 comm="apparmor_parser"
[ 45.350218] audit: type=1400 audit(1493327770.621:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=829 comm="apparmor_parser"
[ 45.353353] audit: type=1400 audit(1493327770.621:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
[ 45.353356] audit: type=1400 audit(1493327770.621:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
[ 45.353358] audit: type=1400 audit(1493327770.621:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=832 comm="apparmor_parser"
[ 45.353360] audit: type=1400 audit(1493327770.621:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
[ 45.353599] audit: type=1400 audit(1493327770.621:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=831 comm="apparmor_parser"
[ 45.353601] audit: type=1400 audit(1493327770.621:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=831 comm="apparmor_parser"
[ 45.354122] audit: type=1400 audit(1493327770.621:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=833 comm="apparmor_parser"
[ 45.355826] audit: type=1400 audit(1493327770.625:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=836 comm="apparmor_parser"
[ 57.169453] wlan0: RX AssocResp from 12:e5:92:ee:e3:c5 (capab=0x401 status=0 aid=1)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ USB Optical Mouse id=10 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB 2.0 Webcam Device id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
↳ MSI WMI hotkeys id=14 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
eDP-1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
1600x900 60.08*+
1440x900 59.89
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 54.104] (==) No Layout section. Using the first Screen section.
[ 54.104] (==) No screen section available. Using defaults.
[ 54.104] (**) |-->Screen "Default Screen Section" (0)
[ 54.104] (**) | |-->Monitor "<default monitor>"
[ 54.182] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 54.373] (--) PCI:*(0:0:2:0) 8086:0406:1462:10e9 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 54.373] (II) LoadModule: "glx"
[ 54.614] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 54.668] (II) LoadModule: "modesetting"
[ 54.668] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 54.668] (II) LoadModule: "fbdev"
[ 54.669] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 54.669] (II) LoadModule: "vesa"
[ 54.669] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 54.670] (WW) Falling back to old probe method for fbdev
[ 54.670] (II) Loading sub module "fbdevhw"
[ 54.670] (II) LoadModule: "fbdevhw"
[ 54.670] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 54.671] (WW) Falling back to old probe method for vesa
[ 54.671] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 54.671] (II) Loading sub module "glamoregl"
[ 54.671] (II) LoadModule: "glamoregl"
[ 54.671] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 56.097] (II) modeset(0): Output eDP-1 has no monitor section
[ 56.102] (II) modeset(0): Output VGA-1 has no monitor section
[ 56.110] (II) modeset(0): Output HDMI-1 has no monitor section
[ 56.125] (II) Loading sub module "fb"
[ 56.125] (II) LoadModule: "fb"
[ 56.125] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 56.247] (II) UnloadModule: "fbdev"
[ 56.247] (II) UnloadModule: "vesa"
[ 56.536] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 56.550] (II) modeset(0): Setting screen physical size to 423 x 238
[ 56.676] (II) LoadModule: "libinput"
[ 56.676] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 57.298] (II) LoadModule: "synaptics"
[ 57.298] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-20-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-20-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:406
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABF...
Device Model: TOSHIBA MQ01ABF050
LU WWN Device Id: 5 000039 5727005ec
Firmware Version: AM001J
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 28 00:14:49 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1345
4 Start_Stop_Count -O--CK 100 100 000 - 201522
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 074 074 000 - 10747
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3210
191 G-Sense_Error_Rate -O--CK 100 100 000 - 37
192 Power-Off_Retract_Count -O--CK 100 100 000 - 398
193 Load_Cycle_Count -O--CK 056 056 000 - 446836
194 Temperature_Celsius -O---K 100 100 000 - 40 (Min/Max 7/59)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 56
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 075 075 000 - 10128
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 186
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
ATA Error Count: 89 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 89 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 d8 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d8 10 77 74 40 00 00:06:57.635 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:06:57.634 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:06:57.634 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:06:57.633 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:06:57.633 SET FEATURES [Set transfer mode]
Error 88 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 b8 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b8 10 77 74 40 00 00:06:53.827 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:06:53.802 FLUSH CACHE EXT
61 08 a0 00 b0 17 40 00 00:06:53.782 WRITE FPDMA QUEUED
60 08 98 08 77 74 40 00 00:06:53.782 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:06:53.782 FLUSH CACHE EXT
Error 87 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 90 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 98 00 78 74 40 00 00:06:53.592 READ FPDMA QUEUED
60 00 90 00 77 74 40 00 00:06:49.883 READ FPDMA QUEUED
60 00 88 00 76 74 40 00 00:06:49.882 READ FPDMA QUEUED
60 00 80 00 75 74 40 00 00:06:49.880 READ FPDMA QUEUED
60 00 78 00 74 74 40 00 00:06:49.878 READ FPDMA QUEUED
Error 86 occurred at disk power-on lifetime: 10730 hours (447 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 90 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 90 10 77 74 40 00 00:06:04.268 READ FPDMA QUEUED
61 40 88 40 2c 9c 40 00 00:06:04.268 WRITE FPDMA QUEUED
61 40 80 40 8e 64 40 00 00:06:04.268 WRITE FPDMA QUEUED
61 40 78 00 62 5c 40 00 00:06:04.268 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:06:04.227 FLUSH CACHE EXT
Error 85 occurred at disk power-on lifetime: 10730 hours (447 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 78 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 78 10 77 74 40 00 00:06:00.324 READ FPDMA QUEUED
60 08 70 08 77 74 40 00 00:06:00.324 READ FPDMA QUEUED
60 08 f0 00 77 74 40 00 00:06:00.291 READ FPDMA QUEUED
61 88 e8 00 e8 c7 40 00 00:06:00.290 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:06:00.290 SET FEATURES [Enable SATA feature]
Dernière modification par bug-in (Le 27/04/2017, à 23:17)
Hors ligne
#28 Le 28/04/2017, à 13:09
- Laurent85
Re : crash après une maj - reparation boot lvm - démontage modifie le boot!
Est-ce que ça a planté depuis ? Si ça a planté depuis il faut penser que cela vient d'un secteur défectueux du disque.
J'ai à nouveau regardé le journal interne du disque pour comparer avec le dernier rapport. Il y a encore eu des erreurs et toujours sur le même secteur.
Error 89 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 d8 10 77 74 40 Error: UNC at LBA = 0x00747710 = 7632656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d8 10 77 74 40 00 00:06:57.635 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:06:57.634 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:06:57.634 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:06:57.633 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:06:57.633 SET FEATURES [Set transfer mode]
Ce qui se passe est la chose suivante :
Le système demande la lecture de ce secteur où est stocké une partie d'un programme. Le disque ne parvient pas à lire ce secteur, enregistre l'erreur dans son journal, incrémente le nombre des secteurs en sursis avant réallocation, actuellement 56 secteurs.
197 Current_Pending_Sector -O--CK 100 100 000 - 56
En théorie le disque après un nouvel échec sur ce secteur va tenter de le relire pour le réallouer à un secteur libre et sain en réserve prévu pour ce type de défaut. C'est normal et cela fait partie de la vie d'un disque d'avoir des secteurs tombant défectueux, c'est pour cette raison que les disques sont conçus avec un certain nombre de secteurs en réserve. De cette façon le disque sera toujours à 100% de sa capacité de stockage, malgré donc quelques secteurs défectueux.
Là il semble qu'il n'y parvienne pas, ce qui provoque au niveau système un plantage parce qu'à cet endroit se trouve probablement une partie d'un programme essentiel, l'erreur d'entrée sortie provoque alors un plantage système.
Dans cette situation il faudrait sauvegarder tes données, changer de disque et réinstaller, ou bien identifier à l'aide d'outils les secteurs défectueux du disque pour savoir quoi faire. Les isoler ou laisser le disque s'en charger en supposant que lors de la réinstallation il n'utilisera plus les secteurs défectueux. Normalement le disque le fait tout seul mais là il est coincé par le fait qu'il n'arrive plus à lire ce secteur pour le réallouer actruellement. En réinstallant par contre il ne l'utilisera plus normalement.
Hors ligne
#29 Le 28/04/2017, à 16:36
- bug-in
Re : crash après une maj - reparation boot lvm - démontage modifie le boot!
Merci pour tes explications ça me fait plaisir de comprendre un peu mieux ce qu'il se passe.
J'ai déjà commencé depuis un petit moment les sauvetages des données essentielles au cas ou.
Je clos le sujet du coup car je suppose qu'on ne peux pas faire grand chose de plus.
Hors ligne
#30 Le 20/05/2017, à 07:41
- bug-in
Re : crash après une maj - reparation boot lvm - démontage modifie le boot!
Bien. J'ai identifié un des problèmes, si ce n'est LE problème qui me créer des erreurs a chaque fois dans mon boot qu'il faut que je répare ensuite. Ça arrive a chaque fois après que je démonte un disque dur externe. Ça ne loupe pas. J'avais remarqué que ubuntu disais : démontage fait, en gros, mais qu'il ne disais pas "fait en sécurité" ou qq.chose comme il dit d'habitude. Je me suis dit que c'était p.ê juste une nouvelle manière, mais il semble que non. Es ce que qq.un a une idée, de ce que je peux tenter ?
Merci d'avance.
sudo fdisk -l
[sudo] Mot de passe de bugin :
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 48D74661-2B0C-4134-9DCE-06E5648405B3
Périphérique Start Fin Secteurs Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1550335 499712 244M Linux filesystem
/dev/sda3 1550336 976771071 975220736 465G LVM Linux
Disque /dev/mapper/ubuntu--vg-root : 463,1 GiB, 497234739200 octets, 971161600 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/mapper/ubuntu--vg-swap_1 : 1,9 GiB, 2063597568 octets, 4030464 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/zram0 : 2,4 GiB, 2600132608 octets, 634798 secteurs
Unités : sectors of 1 * 4096 = 4096 octets
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disque /dev/zram1 : 2,4 GiB, 2600132608 octets, 634798 secteurs
Unités : sectors of 1 * 4096 = 4096 octets
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
sudo blkid
/dev/sda1: UUID="B66F-2CED" TYPE="vfat" PARTUUID="5a14528d-1c1d-431a-8400-eae70b2bf694"
/dev/sda2: UUID="6f29cdc2-e8af-4b1c-9f10-c2aa236ecaeb" TYPE="ext2" PARTUUID="e3193171-bb2a-43c3-bbb4-7b9a6b039f55"
/dev/sda3: UUID="TewiQI-eTT8-SmXL-tI0j-5Dlw-yjv1-00zdn9" TYPE="LVM2_member" PARTUUID="4c99b8ef-2b60-40de-9f42-85bf9d10f777"
/dev/mapper/ubuntu--vg-root: UUID="e7b9bbcf-6959-42ce-8a91-d5c797819418" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="42b412bb-a8cd-4cde-a06d-f5f02abe8ec8" TYPE="swap"
/dev/zram0: UUID="0235bdae-e33a-44fd-a02e-f7c80c723fc5" TYPE="swap"
/dev/zram1: UUID="c8ecf278-81cf-4583-889f-1fd2b9ea4062" TYPE="swap"
Je pense qu'il faudrait que je puisse aussi désinstaller zram qui ne me sert plus (enfin je pense).
Dernière modification par bug-in (Le 20/05/2017, à 07:51)
Hors ligne